diff --git a/docs/Dockerfile b/docs/Dockerfile --- a/docs/Dockerfile +++ b/docs/Dockerfile @@ -4,11 +4,20 @@ WORKDIR /project RUN apt-get update \ && apt-get install --no-install-recommends --yes \ - curl \ - zip \ - graphviz \ - imagemagick \ - make \ + curl \ + zip \ + graphviz \ + dvipng \ + imagemagick \ + make \ + latexmk \ + texlive-latex-recommended \ + texlive-latex-extra \ + texlive-xetex \ + fonts-freefont-otf \ + texlive-fonts-recommended \ + texlive-lang-greek \ + tex-gyre \ && apt-get autoremove \ && apt-get clean \ && rm -rf /var/lib/apt/lists/* diff --git a/docs/Makefile b/docs/Makefile --- a/docs/Makefile +++ b/docs/Makefile @@ -1,183 +1,20 @@ -# Makefile for Sphinx documentation +# Minimal makefile for Sphinx documentation # -# You can set these variables from the command line. +# You can set these variables from the command line, and also +# from the environment for the first two. SPHINXOPTS ?= SPHINXBUILD ?= sphinx-build -SOURCEDIR = source +SOURCEDIR = . BUILDDIR = _build -# User-friendly check for sphinx-build -ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1) -$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/) -endif - -# Internal variables. -PAPEROPT_a4 = -D latex_paper_size=a4 -PAPEROPT_letter = -D latex_paper_size=letter -ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . -# the i18n builder cannot share the environment and doctrees with the others -I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . - -.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext - +# Put it first so that "make" without argument is like "make help". help: - @echo "Please use \`make ' where is one of" - @echo " html to make standalone HTML files" - @echo " dirhtml to make HTML files named index.html in directories" - @echo " singlehtml to make a single large HTML file" - @echo " pickle to make pickle files" - @echo " json to make JSON files" - @echo " htmlhelp to make HTML files and a HTML help project" - @echo " qthelp to make HTML files and a qthelp project" - @echo " devhelp to make HTML files and a Devhelp project" - @echo " epub to make an epub" - @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" - @echo " latexpdf to make LaTeX files and run them through pdflatex" - @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" - @echo " text to make text files" - @echo " man to make manual pages" - @echo " texinfo to make Texinfo files" - @echo " info to make Texinfo files and run them through makeinfo" - @echo " gettext to make PO message catalogs" - @echo " changes to make an overview of all changed/added/deprecated items" - @echo " xml to make Docutils-native XML files" - @echo " pseudoxml to make pseudoxml-XML files for display purposes" - @echo " linkcheck to check all external links for integrity" - @echo " doctest to run all doctests embedded in the documentation (if enabled)" - -clean: - rm -rf $(BUILDDIR)/* - -cleanup: - @echo "cleaning build dir" - rm -rf $(BUILDDIR)/* - @echo "cleaning result symlink" - rm -v result - -html: - $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html - @echo - @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." - -dirhtml: - $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml - @echo - @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." - -singlehtml: - $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml - @echo - @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." - -pickle: - $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle - @echo - @echo "Build finished; now you can process the pickle files." - -json: - $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json - @echo - @echo "Build finished; now you can process the JSON files." - -htmlhelp: - $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp - @echo - @echo "Build finished; now you can run HTML Help Workshop with the" \ - ".hhp project file in $(BUILDDIR)/htmlhelp." + @$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O) -qthelp: - $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp - @echo - @echo "Build finished; now you can run "qcollectiongenerator" with the" \ - ".qhcp project file in $(BUILDDIR)/qthelp, like this:" - @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/RhodeCodeInstaller.qhcp" - @echo "To view the help file:" - @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/RhodeCodeInstaller.qhc" - -devhelp: - $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp - @echo - @echo "Build finished." - @echo "To view the help file:" - @echo "# mkdir -p $$HOME/.local/share/devhelp/RhodeCodeInstaller" - @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/RhodeCodeInstaller" - @echo "# devhelp" - -epub: - $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub - @echo - @echo "Build finished. The epub file is in $(BUILDDIR)/epub." - -latex: - $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex - @echo - @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." - @echo "Run \`make' in that directory to run these through (pdf)latex" \ - "(use \`make latexpdf' here to do that automatically)." - -latexpdf: - $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex - @echo "Running LaTeX files through pdflatex..." - $(MAKE) -C $(BUILDDIR)/latex all-pdf - @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." - -latexpdfja: - $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex - @echo "Running LaTeX files through platex and dvipdfmx..." - $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja - @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." - -text: - $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text - @echo - @echo "Build finished. The text files are in $(BUILDDIR)/text." +.PHONY: help Makefile -man: - $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man - @echo - @echo "Build finished. The manual pages are in $(BUILDDIR)/man." - -texinfo: - $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo - @echo - @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." - @echo "Run \`make' in that directory to run these through makeinfo" \ - "(use \`make info' here to do that automatically)." - -info: - $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo - @echo "Running Texinfo files through makeinfo..." - make -C $(BUILDDIR)/texinfo info - @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." - -gettext: - $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale - @echo - @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." - -changes: - $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes - @echo - @echo "The overview file is in $(BUILDDIR)/changes." - -linkcheck: - $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck - @echo - @echo "Link check complete; look for any errors in the above output " \ - "or in $(BUILDDIR)/linkcheck/output.txt." - -doctest: - $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest - @echo "Testing of doctests in the sources finished, look at the " \ - "results in $(BUILDDIR)/doctest/output.txt." - -xml: - $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml - @echo - @echo "Build finished. The XML files are in $(BUILDDIR)/xml." - -pseudoxml: - $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml - @echo - @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." +# Catch-all target: route all unknown targets to Sphinx using the new +# "make mode" option. $(O) is meant as a shortcut for $(SPHINXOPTS). +%: Makefile + @$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O) diff --git a/docs/_static/.keep b/docs/_static/.keep new file mode 100644 diff --git a/docs/_templates/page.html b/docs/_templates/page.html --- a/docs/_templates/page.html +++ b/docs/_templates/page.html @@ -87,7 +87,7 @@ -
+
{% block content %}{{ body }}{% endblock %}
@@ -141,6 +141,9 @@ {% trans %}Sphinx and {% endtrans -%} @pradyunsg's {% endif -%} + + + {%- if last_updated -%}
{% trans last_updated=last_updated|e -%} @@ -149,7 +152,7 @@
- Got documentation defects and suggestions? Submit docs issues + Got documentation defects and suggestions? Submit docs issues
{%- endif %} @@ -172,6 +175,9 @@ {%- endif -%} + {#- Show GitHub repository home -#} + {%- if READTHEDOCS and display_github and github_user != "None" and github_repo != "None" -%} + {%- endif -%} {%- endif %} {%- endif %} @@ -200,5 +206,4 @@ - {%- endblock %} diff --git a/docs/_templates/sidebar/brand.html b/docs/_templates/sidebar/brand.html new file mode 100644 --- /dev/null +++ b/docs/_templates/sidebar/brand.html @@ -0,0 +1,34 @@ +{#- + +Hi there! + +You might be interested in https://pradyunsg.me/furo/customisation/sidebar/ + +Although if you're reading this, chances are that you're either familiar +enough with Sphinx that you know what you're doing, or landed here from that +documentation page. + +Hope your day's going well. :) + +-#} + \ No newline at end of file diff --git a/docs/release-notes/release-notes-5.0.0.rst b/docs/release-notes/release-notes-5.0.0.rst new file mode 100644 --- /dev/null +++ b/docs/release-notes/release-notes-5.0.0.rst @@ -0,0 +1,45 @@ +|RCE| 5.0.0 |RNS| +----------------- + +Release Date +^^^^^^^^^^^^ + +- TBA + + +New Features +^^^^^^^^^^^^ + +- Full support of Python3 and Python3.11 + + +General +^^^^^^^ + +- Upgraded all dependency libraries to their latest available versions + + +Security +^^^^^^^^ + + + +Performance +^^^^^^^^^^^ + + + +Fixes +^^^^^ + + + +Upgrade notes +^^^^^^^^^^^^^ + +- RhodeCode 5.0.0 is a mayor upgrade that support latest Python versions 3.11, + and also comes with lots of internal changes and performance improvements. +- RhodeCode 5.0.0 is only supported via our new docker rcstack installer or helm/k8s stack +- Please see migration guide :ref:`rcstack:migration-to-rcstack` +- RhodeCode 5.0.0 also requires a new license for EE instances, please reach out to us via support@rhodecode.com to + convert your license key. diff --git a/docs/release-notes/release-notes.rst b/docs/release-notes/release-notes.rst --- a/docs/release-notes/release-notes.rst +++ b/docs/release-notes/release-notes.rst @@ -3,6 +3,15 @@ Release Notes ============= +|RCE| 5.x Versions +------------------ + +.. toctree:: + :maxdepth: 1 + + release-notes-5.0.0.rst + + |RCE| 4.x Versions ------------------