diff --git a/rhodecode/tests/rhodecode.ini b/rhodecode/tests/rhodecode.ini new file mode 100644 --- /dev/null +++ b/rhodecode/tests/rhodecode.ini @@ -0,0 +1,716 @@ + + +################################################################################ +## RHODECODE ENTERPRISE CONFIGURATION ## +# The %(here)s variable will be replaced with the parent directory of this file# +################################################################################ + +[DEFAULT] +debug = true + +################################################################################ +## EMAIL CONFIGURATION ## +## Uncomment and replace with the email address which should receive ## +## any error reports after an application crash ## +## Additionally these settings will be used by the RhodeCode mailing system ## +################################################################################ + +## prefix all emails subjects with given prefix, helps filtering out emails +#email_prefix = [RhodeCode] + +## email FROM address all mails will be sent +#app_email_from = rhodecode-noreply@localhost + +## Uncomment and replace with the address which should receive any error report +## note: using appenlight for error handling doesn't need this to be uncommented +#email_to = admin@localhost + +## in case of Application errors, sent an error email form +#error_email_from = rhodecode_error@localhost + +## additional error message to be send in case of server crash +#error_message = + + +#smtp_server = mail.server.com +#smtp_username = +#smtp_password = +#smtp_port = +#smtp_use_tls = false +#smtp_use_ssl = true +## Specify available auth parameters here (e.g. LOGIN PLAIN CRAM-MD5, etc.) +#smtp_auth = + +[server:main] +## COMMON ## +host = 0.0.0.0 +port = 5000 + +################################## +## WAITRESS WSGI SERVER ## +## Recommended for Development ## +################################## + +use = egg:waitress#main +## number of worker threads +threads = 5 +## MAX BODY SIZE 100GB +max_request_body_size = 107374182400 +## Use poll instead of select, fixes file descriptors limits problems. +## May not work on old windows systems. +asyncore_use_poll = true + + +########################## +## GUNICORN WSGI SERVER ## +########################## +## run with gunicorn --log-config --paste + +#use = egg:gunicorn#main +## Sets the number of process workers. You must set `instance_id = *` +## when this option is set to more than one worker, recommended +## value is (2 * NUMBER_OF_CPUS + 1), eg 2CPU = 5 workers +## The `instance_id = *` must be set in the [app:main] section below +#workers = 2 +## number of threads for each of the worker, must be set to 1 for gevent +## generally recommened to be at 1 +#threads = 1 +## process name +#proc_name = rhodecode +## type of worker class, one of sync, gevent +## recommended for bigger setup is using of of other than sync one +#worker_class = sync +## The maximum number of simultaneous clients. Valid only for Gevent +#worker_connections = 10 +## max number of requests that worker will handle before being gracefully +## restarted, could prevent memory leaks +#max_requests = 1000 +#max_requests_jitter = 30 +## amount of time a worker can spend with handling a request before it +## gets killed and restarted. Set to 6hrs +#timeout = 21600 + +## UWSGI ## +## run with uwsgi --ini-paste-logged +#[uwsgi] +#socket = /tmp/uwsgi.sock +#master = true +#http = 127.0.0.1:5000 + +## set as deamon and redirect all output to file +#daemonize = ./uwsgi_rhodecode.log + +## master process PID +#pidfile = ./uwsgi_rhodecode.pid + +## stats server with workers statistics, use uwsgitop +## for monitoring, `uwsgitop 127.0.0.1:1717` +#stats = 127.0.0.1:1717 +#memory-report = true + +## log 5XX errors +#log-5xx = true + +## Set the socket listen queue size. +#listen = 256 + +## Gracefully Reload workers after the specified amount of managed requests +## (avoid memory leaks). +#max-requests = 1000 + +## enable large buffers +#buffer-size=65535 + +## socket and http timeouts ## +#http-timeout=3600 +#socket-timeout=3600 + +## Log requests slower than the specified number of milliseconds. +#log-slow = 10 + +## Exit if no app can be loaded. +#need-app = true + +## Set lazy mode (load apps in workers instead of master). +#lazy = true + +## scaling ## +## set cheaper algorithm to use, if not set default will be used +#cheaper-algo = spare + +## minimum number of workers to keep at all times +#cheaper = 1 + +## number of workers to spawn at startup +#cheaper-initial = 1 + +## maximum number of workers that can be spawned +#workers = 4 + +## how many workers should be spawned at a time +#cheaper-step = 1 + +## prefix middleware for RhodeCode, disables force_https flag. +## recommended when using proxy setup. +## allows to set RhodeCode under a prefix in server. +## eg https://server.com/. Enable `filter-with =` option below as well. +## optionally set prefix like: `prefix = /` +[filter:proxy-prefix] +use = egg:PasteDeploy#prefix +prefix = / + +[app:main] +is_test = True +use = egg:rhodecode-enterprise-ce + +## enable proxy prefix middleware, defined above +#filter-with = proxy-prefix + + +## RHODECODE PLUGINS ## +rhodecode.includes = rhodecode.api + +# api prefix url +rhodecode.api.url = /_admin/api + + +## END RHODECODE PLUGINS ## + +## encryption key used to encrypt social plugin tokens, +## remote_urls with credentials etc, if not set it defaults to +## `beaker.session.secret` +#rhodecode.encrypted_values.secret = + +## decryption strict mode (enabled by default). It controls if decryption raises +## `SignatureVerificationError` in case of wrong key, or damaged encryption data. +#rhodecode.encrypted_values.strict = false + +## return gzipped responses from Rhodecode (static files/application) +gzip_responses = false + +## autogenerate javascript routes file on startup +generate_js_files = false + +## Optional Languages +## en(default), be, de, es, fr, it, ja, pl, pt, ru, zh +lang = en + +## perform a full repository scan on each server start, this should be +## set to false after first startup, to allow faster server restarts. +startup.import_repos = true + +## Uncomment and set this path to use archive download cache. +## Once enabled, generated archives will be cached at this location +## and served from the cache during subsequent requests for the same archive of +## the repository. +#archive_cache_dir = /tmp/tarballcache + +## change this to unique ID for security +app_instance_uuid = rc-production + +## cut off limit for large diffs (size in bytes) +cut_off_limit_diff = 1024000 +cut_off_limit_file = 256000 + +## use cache version of scm repo everywhere +vcs_full_cache = false + +## force https in RhodeCode, fixes https redirects, assumes it's always https +## Normally this is controlled by proper http flags sent from http server +force_https = false + +## use Strict-Transport-Security headers +use_htsts = false + +## number of commits stats will parse on each iteration +commit_parse_limit = 25 + +## git rev filter option, --all is the default filter, if you need to +## hide all refs in changelog switch this to --branches --tags +git_rev_filter = --all + +# Set to true if your repos are exposed using the dumb protocol +git_update_server_info = false + +## RSS/ATOM feed options +rss_cut_off_limit = 256000 +rss_items_per_page = 10 +rss_include_diff = false + +## gist URL alias, used to create nicer urls for gist. This should be an +## url that does rewrites to _admin/gists/. +## example: http://gist.rhodecode.org/{gistid}. Empty means use the internal +## RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/ +gist_alias_url = + +## List of controllers (using glob pattern syntax) that AUTH TOKENS could be +## used for access. +## Adding ?auth_token = to the url authenticates this request as if it +## came from the the logged in user who own this authentication token. +## +## Syntax is :. +## To enable access to raw_files put `FilesController:raw`. +## To enable access to patches add `ChangesetController:changeset_patch`. +## The list should be "," separated and on a single line. +## +## Recommended controllers to enable: +# ChangesetController:changeset_patch, +# ChangesetController:changeset_raw, +# FilesController:raw, +# FilesController:archivefile, +# GistsController:*, +api_access_controllers_whitelist = + +## default encoding used to convert from and to unicode +## can be also a comma separated list of encoding in case of mixed encodings +default_encoding = UTF-8 + +## instance-id prefix +## a prefix key for this instance used for cache invalidation when running +## multiple instances of rhodecode, make sure it's globally unique for +## all running rhodecode instances. Leave empty if you don't use it +instance_id = + +## Fallback authentication plugin. Set this to a plugin ID to force the usage +## of an authentication plugin also if it is disabled by it's settings. +## This could be useful if you are unable to log in to the system due to broken +## authentication settings. Then you can enable e.g. the internal rhodecode auth +## module to log in again and fix the settings. +## +## Available builtin plugin IDs (hash is part of the ID): +## egg:rhodecode-enterprise-ce#rhodecode +## egg:rhodecode-enterprise-ce#pam +## egg:rhodecode-enterprise-ce#ldap +## egg:rhodecode-enterprise-ce#jasig_cas +## egg:rhodecode-enterprise-ce#headers +## egg:rhodecode-enterprise-ce#crowd +#rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode + +## alternative return HTTP header for failed authentication. Default HTTP +## response is 401 HTTPUnauthorized. Currently HG clients have troubles with +## handling that causing a series of failed authentication calls. +## Set this variable to 403 to return HTTPForbidden, or any other HTTP code +## This will be served instead of default 401 on bad authnetication +auth_ret_code = + +## use special detection method when serving auth_ret_code, instead of serving +## ret_code directly, use 401 initially (Which triggers credentials prompt) +## and then serve auth_ret_code to clients +auth_ret_code_detection = false + +## locking return code. When repository is locked return this HTTP code. 2XX +## codes don't break the transactions while 4XX codes do +lock_ret_code = 423 + +## allows to change the repository location in settings page +allow_repo_location_change = true + +## allows to setup custom hooks in settings page +allow_custom_hooks_settings = true + +## generated license token, goto license page in RhodeCode settings to obtain +## new token +license_token = abra-cada-bra1-rce3 + +## supervisor connection uri, for managing supervisor and logs. +supervisor.uri = +## supervisord group name/id we only want this RC instance to handle +supervisor.group_id = dev + +## Display extended labs settings +labs_settings_active = true + +#################################### +### CELERY CONFIG #### +#################################### +use_celery = false +broker.host = localhost +broker.vhost = rabbitmqhost +broker.port = 5672 +broker.user = rabbitmq +broker.password = qweqwe + +celery.imports = rhodecode.lib.celerylib.tasks + +celery.result.backend = amqp +celery.result.dburi = amqp:// +celery.result.serialier = json + +#celery.send.task.error.emails = true +#celery.amqp.task.result.expires = 18000 + +celeryd.concurrency = 2 +#celeryd.log.file = celeryd.log +celeryd.log.level = debug +celeryd.max.tasks.per.child = 1 + +## tasks will never be sent to the queue, but executed locally instead. +celery.always.eager = false + +#################################### +### BEAKER CACHE #### +#################################### +# default cache dir for templates. Putting this into a ramdisk +## can boost performance, eg. %(here)s/data_ramdisk +cache_dir = %(here)s/data + +## locking and default file storage for Beaker. Putting this into a ramdisk +## can boost performance, eg. %(here)s/data_ramdisk/cache/beaker_data +beaker.cache.data_dir = %(here)s/rc/data/cache/beaker_data +beaker.cache.lock_dir = %(here)s/rc/data/cache/beaker_lock + +beaker.cache.regions = super_short_term, short_term, long_term, sql_cache_short, auth_plugins, repo_cache_long + +beaker.cache.super_short_term.type = memory +beaker.cache.super_short_term.expire = 1 +beaker.cache.super_short_term.key_length = 256 + +beaker.cache.short_term.type = memory +beaker.cache.short_term.expire = 60 +beaker.cache.short_term.key_length = 256 + +beaker.cache.long_term.type = memory +beaker.cache.long_term.expire = 36000 +beaker.cache.long_term.key_length = 256 + +beaker.cache.sql_cache_short.type = memory +beaker.cache.sql_cache_short.expire = 1 +beaker.cache.sql_cache_short.key_length = 256 + +## default is memory cache, configure only if required +## using multi-node or multi-worker setup +#beaker.cache.auth_plugins.type = ext:database +#beaker.cache.auth_plugins.lock_dir = %(here)s/data/cache/auth_plugin_lock +#beaker.cache.auth_plugins.url = postgresql://postgres:secret@localhost/rhodecode +#beaker.cache.auth_plugins.url = mysql://root:secret@127.0.0.1/rhodecode +#beaker.cache.auth_plugins.sa.pool_recycle = 3600 +#beaker.cache.auth_plugins.sa.pool_size = 10 +#beaker.cache.auth_plugins.sa.max_overflow = 0 + +beaker.cache.repo_cache_long.type = memorylru_base +beaker.cache.repo_cache_long.max_items = 4096 +beaker.cache.repo_cache_long.expire = 2592000 + +## default is memorylru_base cache, configure only if required +## using multi-node or multi-worker setup +#beaker.cache.repo_cache_long.type = ext:memcached +#beaker.cache.repo_cache_long.url = localhost:11211 +#beaker.cache.repo_cache_long.expire = 1209600 +#beaker.cache.repo_cache_long.key_length = 256 + +#################################### +### BEAKER SESSION #### +#################################### + +## .session.type is type of storage options for the session, current allowed +## types are file, ext:memcached, ext:database, and memory (default). +beaker.session.type = file +beaker.session.data_dir = %(here)s/rc/data/sessions/data + +## db based session, fast, and allows easy management over logged in users +#beaker.session.type = ext:database +#beaker.session.table_name = db_session +#beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode +#beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode +#beaker.session.sa.pool_recycle = 3600 +#beaker.session.sa.echo = false + +beaker.session.key = rhodecode +beaker.session.secret = test-rc-uytcxaz +beaker.session.lock_dir = %(here)s/rc/data/sessions/lock + +## Secure encrypted cookie. Requires AES and AES python libraries +## you must disable beaker.session.secret to use this +#beaker.session.encrypt_key = +#beaker.session.validate_key = + +## sets session as invalid(also logging out user) if it haven not been +## accessed for given amount of time in seconds +beaker.session.timeout = 2592000 +beaker.session.httponly = true +## Path to use for the cookie. +#beaker.session.cookie_path = / + +## uncomment for https secure cookie +beaker.session.secure = false + +## auto save the session to not to use .save() +beaker.session.auto = false + +## default cookie expiration time in seconds, set to `true` to set expire +## at browser close +#beaker.session.cookie_expires = 3600 + +################################### +## SEARCH INDEXING CONFIGURATION ## +################################### +## Full text search indexer is available in rhodecode-tools under +## `rhodecode-tools index` command + +# WHOOSH Backend, doesn't require additional services to run +# it works good with few dozen repos +search.module = rhodecode.lib.index.whoosh +search.location = %(here)s/data/index + +######################################## +### CHANNELSTREAM CONFIG #### +######################################## +## channelstream enables persistent connections and live notification +## in the system. It's also used by the chat system + +channelstream.enabled = false +# location of channelstream server on the backend +channelstream.server = 127.0.0.1:9800 +## location of the channelstream server from outside world +## most likely this would be an http server special backend URL, that handles +## websocket connections see nginx example for config +channelstream.ws_url = ws://rhodecode.yourserver.com/_channelstream +channelstream.secret = secret +channelstream.history.location = %(here)s/channelstream_history + + +################################### +## APPENLIGHT CONFIG ## +################################### + +## Appenlight is tailored to work with RhodeCode, see +## http://appenlight.com for details how to obtain an account + +## appenlight integration enabled +appenlight = false + +appenlight.server_url = https://api.appenlight.com +appenlight.api_key = YOUR_API_KEY +#appenlight.transport_config = https://api.appenlight.com?threaded=1&timeout=5 + +# used for JS client +appenlight.api_public_key = YOUR_API_PUBLIC_KEY + +## TWEAK AMOUNT OF INFO SENT HERE + +## enables 404 error logging (default False) +appenlight.report_404 = false + +## time in seconds after request is considered being slow (default 1) +appenlight.slow_request_time = 1 + +## record slow requests in application +## (needs to be enabled for slow datastore recording and time tracking) +appenlight.slow_requests = true + +## enable hooking to application loggers +appenlight.logging = true + +## minimum log level for log capture +appenlight.logging.level = WARNING + +## send logs only from erroneous/slow requests +## (saves API quota for intensive logging) +appenlight.logging_on_error = false + +## list of additonal keywords that should be grabbed from environ object +## can be string with comma separated list of words in lowercase +## (by default client will always send following info: +## 'REMOTE_USER', 'REMOTE_ADDR', 'SERVER_NAME', 'CONTENT_TYPE' + all keys that +## start with HTTP* this list be extended with additional keywords here +appenlight.environ_keys_whitelist = + +## list of keywords that should be blanked from request object +## can be string with comma separated list of words in lowercase +## (by default client will always blank keys that contain following words +## 'password', 'passwd', 'pwd', 'auth_tkt', 'secret', 'csrf' +## this list be extended with additional keywords set here +appenlight.request_keys_blacklist = + +## list of namespaces that should be ignores when gathering log entries +## can be string with comma separated list of namespaces +## (by default the client ignores own entries: appenlight_client.client) +appenlight.log_namespace_blacklist = + + +################################################################################ +## WARNING: *THE LINE BELOW MUST BE UNCOMMENTED ON A PRODUCTION ENVIRONMENT* ## +## Debug mode will enable the interactive debugging tool, allowing ANYONE to ## +## execute malicious code after an exception is raised. ## +################################################################################ +set debug = false + + +############## +## STYLING ## +############## +debug_style = false + +######################################################### +### DB CONFIGS - EACH DB WILL HAVE IT'S OWN CONFIG ### +######################################################### +#sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode_test.db +#sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode_test +#sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode_test +sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode_test.db + +# see sqlalchemy docs for other advanced settings + +## print the sql statements to output +sqlalchemy.db1.echo = false +## recycle the connections after this ammount of seconds +sqlalchemy.db1.pool_recycle = 3600 +sqlalchemy.db1.convert_unicode = true + +## the number of connections to keep open inside the connection pool. +## 0 indicates no limit +#sqlalchemy.db1.pool_size = 5 + +## the number of connections to allow in connection pool "overflow", that is +## connections that can be opened above and beyond the pool_size setting, +## which defaults to five. +#sqlalchemy.db1.max_overflow = 10 + + +################## +### VCS CONFIG ### +################## +vcs.server.enable = true +vcs.server = localhost:9901 + +## Web server connectivity protocol, responsible for web based VCS operatations +## Available protocols are: +## `pyro4` - using pyro4 server +## `http` - using http-rpc backend +vcs.server.protocol = pyro4 + +## Push/Pull operations protocol, available options are: +## `pyro4` - using pyro4 server +## `rhodecode.lib.middleware.utils.scm_app_http` - Http based, recommended +## `vcsserver.scm_app` - internal app (EE only) +vcs.scm_app_implementation = pyro4 + +## Push/Pull operations hooks protocol, available options are: +## `pyro4` - using pyro4 server +## `http` - using http-rpc backend +vcs.hooks.protocol = pyro4 + +vcs.server.log_level = debug +## Start VCSServer with this instance as a subprocess, usefull for development +vcs.start_server = true + +## List of enabled VCS backends, available options are: +## `hg` - mercurial +## `git` - git +## `svn` - subversion +vcs.backends = hg, git, svn + +vcs.connection_timeout = 3600 +## Compatibility version when creating SVN repositories. Defaults to newest version when commented out. +## Available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible +#vcs.svn.compatible_version = pre-1.8-compatible + + +############################################################ +### Subversion proxy support (mod_dav_svn) ### +### Maps RhodeCode repo groups into SVN paths for Apache ### +############################################################ +## Enable or disable the config file generation. +svn.proxy.generate_config = false +## Generate config file with `SVNListParentPath` set to `On`. +svn.proxy.list_parent_path = true +## Set location and file name of generated config file. +svn.proxy.config_file_path = %(here)s/mod_dav_svn.conf +## File system path to the directory containing the repositories served by +## RhodeCode. +svn.proxy.parent_path_root = /path/to/repo_store +## Used as a prefix to the block in the generated config file. In +## most cases it should be set to `/`. +svn.proxy.location_root = / + + +################################ +### LOGGING CONFIGURATION #### +################################ +[loggers] +keys = root, routes, rhodecode, sqlalchemy, beaker, pyro4, templates + +[handlers] +keys = console, console_sql + +[formatters] +keys = generic, color_formatter, color_formatter_sql + +############# +## LOGGERS ## +############# +[logger_root] +level = NOTSET +handlers = console + +[logger_routes] +level = DEBUG +handlers = +qualname = routes.middleware +## "level = DEBUG" logs the route matched and routing variables. +propagate = 1 + +[logger_beaker] +level = DEBUG +handlers = +qualname = beaker.container +propagate = 1 + +[logger_pyro4] +level = DEBUG +handlers = +qualname = Pyro4 +propagate = 1 + +[logger_templates] +level = INFO +handlers = +qualname = pylons.templating +propagate = 1 + +[logger_rhodecode] +level = DEBUG +handlers = +qualname = rhodecode +propagate = 1 + +[logger_sqlalchemy] +level = ERROR +handlers = console_sql +qualname = sqlalchemy.engine +propagate = 0 + +############## +## HANDLERS ## +############## + +[handler_console] +class = StreamHandler +args = (sys.stderr,) +level = DEBUG +formatter = generic + +[handler_console_sql] +class = StreamHandler +args = (sys.stderr,) +level = WARN +formatter = generic + +################ +## FORMATTERS ## +################ + +[formatter_generic] +class = rhodecode.lib.logging_formatter.Pyro4AwareFormatter +format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s +datefmt = %Y-%m-%d %H:%M:%S + +[formatter_color_formatter] +class = rhodecode.lib.logging_formatter.ColorFormatter +format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s +datefmt = %Y-%m-%d %H:%M:%S + +[formatter_color_formatter_sql] +class = rhodecode.lib.logging_formatter.ColorFormatterSql +format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s +datefmt = %Y-%m-%d %H:%M:%S diff --git a/test.ini b/test.ini deleted file mode 100644 --- a/test.ini +++ /dev/null @@ -1,716 +0,0 @@ - - -################################################################################ -## RHODECODE ENTERPRISE CONFIGURATION ## -# The %(here)s variable will be replaced with the parent directory of this file# -################################################################################ - -[DEFAULT] -debug = true - -################################################################################ -## EMAIL CONFIGURATION ## -## Uncomment and replace with the email address which should receive ## -## any error reports after an application crash ## -## Additionally these settings will be used by the RhodeCode mailing system ## -################################################################################ - -## prefix all emails subjects with given prefix, helps filtering out emails -#email_prefix = [RhodeCode] - -## email FROM address all mails will be sent -#app_email_from = rhodecode-noreply@localhost - -## Uncomment and replace with the address which should receive any error report -## note: using appenlight for error handling doesn't need this to be uncommented -#email_to = admin@localhost - -## in case of Application errors, sent an error email form -#error_email_from = rhodecode_error@localhost - -## additional error message to be send in case of server crash -#error_message = - - -#smtp_server = mail.server.com -#smtp_username = -#smtp_password = -#smtp_port = -#smtp_use_tls = false -#smtp_use_ssl = true -## Specify available auth parameters here (e.g. LOGIN PLAIN CRAM-MD5, etc.) -#smtp_auth = - -[server:main] -## COMMON ## -host = 0.0.0.0 -port = 5000 - -################################## -## WAITRESS WSGI SERVER ## -## Recommended for Development ## -################################## - -use = egg:waitress#main -## number of worker threads -threads = 5 -## MAX BODY SIZE 100GB -max_request_body_size = 107374182400 -## Use poll instead of select, fixes file descriptors limits problems. -## May not work on old windows systems. -asyncore_use_poll = true - - -########################## -## GUNICORN WSGI SERVER ## -########################## -## run with gunicorn --log-config --paste - -#use = egg:gunicorn#main -## Sets the number of process workers. You must set `instance_id = *` -## when this option is set to more than one worker, recommended -## value is (2 * NUMBER_OF_CPUS + 1), eg 2CPU = 5 workers -## The `instance_id = *` must be set in the [app:main] section below -#workers = 2 -## number of threads for each of the worker, must be set to 1 for gevent -## generally recommened to be at 1 -#threads = 1 -## process name -#proc_name = rhodecode -## type of worker class, one of sync, gevent -## recommended for bigger setup is using of of other than sync one -#worker_class = sync -## The maximum number of simultaneous clients. Valid only for Gevent -#worker_connections = 10 -## max number of requests that worker will handle before being gracefully -## restarted, could prevent memory leaks -#max_requests = 1000 -#max_requests_jitter = 30 -## amount of time a worker can spend with handling a request before it -## gets killed and restarted. Set to 6hrs -#timeout = 21600 - -## UWSGI ## -## run with uwsgi --ini-paste-logged -#[uwsgi] -#socket = /tmp/uwsgi.sock -#master = true -#http = 127.0.0.1:5000 - -## set as deamon and redirect all output to file -#daemonize = ./uwsgi_rhodecode.log - -## master process PID -#pidfile = ./uwsgi_rhodecode.pid - -## stats server with workers statistics, use uwsgitop -## for monitoring, `uwsgitop 127.0.0.1:1717` -#stats = 127.0.0.1:1717 -#memory-report = true - -## log 5XX errors -#log-5xx = true - -## Set the socket listen queue size. -#listen = 256 - -## Gracefully Reload workers after the specified amount of managed requests -## (avoid memory leaks). -#max-requests = 1000 - -## enable large buffers -#buffer-size=65535 - -## socket and http timeouts ## -#http-timeout=3600 -#socket-timeout=3600 - -## Log requests slower than the specified number of milliseconds. -#log-slow = 10 - -## Exit if no app can be loaded. -#need-app = true - -## Set lazy mode (load apps in workers instead of master). -#lazy = true - -## scaling ## -## set cheaper algorithm to use, if not set default will be used -#cheaper-algo = spare - -## minimum number of workers to keep at all times -#cheaper = 1 - -## number of workers to spawn at startup -#cheaper-initial = 1 - -## maximum number of workers that can be spawned -#workers = 4 - -## how many workers should be spawned at a time -#cheaper-step = 1 - -## prefix middleware for RhodeCode, disables force_https flag. -## recommended when using proxy setup. -## allows to set RhodeCode under a prefix in server. -## eg https://server.com/. Enable `filter-with =` option below as well. -## optionally set prefix like: `prefix = /` -[filter:proxy-prefix] -use = egg:PasteDeploy#prefix -prefix = / - -[app:main] -is_test = True -use = egg:rhodecode-enterprise-ce - -## enable proxy prefix middleware, defined above -#filter-with = proxy-prefix - - -## RHODECODE PLUGINS ## -rhodecode.includes = rhodecode.api - -# api prefix url -rhodecode.api.url = /_admin/api - - -## END RHODECODE PLUGINS ## - -## encryption key used to encrypt social plugin tokens, -## remote_urls with credentials etc, if not set it defaults to -## `beaker.session.secret` -#rhodecode.encrypted_values.secret = - -## decryption strict mode (enabled by default). It controls if decryption raises -## `SignatureVerificationError` in case of wrong key, or damaged encryption data. -#rhodecode.encrypted_values.strict = false - -## return gzipped responses from Rhodecode (static files/application) -gzip_responses = false - -## autogenerate javascript routes file on startup -generate_js_files = false - -## Optional Languages -## en(default), be, de, es, fr, it, ja, pl, pt, ru, zh -lang = en - -## perform a full repository scan on each server start, this should be -## set to false after first startup, to allow faster server restarts. -startup.import_repos = true - -## Uncomment and set this path to use archive download cache. -## Once enabled, generated archives will be cached at this location -## and served from the cache during subsequent requests for the same archive of -## the repository. -#archive_cache_dir = /tmp/tarballcache - -## change this to unique ID for security -app_instance_uuid = rc-production - -## cut off limit for large diffs (size in bytes) -cut_off_limit_diff = 1024000 -cut_off_limit_file = 256000 - -## use cache version of scm repo everywhere -vcs_full_cache = false - -## force https in RhodeCode, fixes https redirects, assumes it's always https -## Normally this is controlled by proper http flags sent from http server -force_https = false - -## use Strict-Transport-Security headers -use_htsts = false - -## number of commits stats will parse on each iteration -commit_parse_limit = 25 - -## git rev filter option, --all is the default filter, if you need to -## hide all refs in changelog switch this to --branches --tags -git_rev_filter = --all - -# Set to true if your repos are exposed using the dumb protocol -git_update_server_info = false - -## RSS/ATOM feed options -rss_cut_off_limit = 256000 -rss_items_per_page = 10 -rss_include_diff = false - -## gist URL alias, used to create nicer urls for gist. This should be an -## url that does rewrites to _admin/gists/. -## example: http://gist.rhodecode.org/{gistid}. Empty means use the internal -## RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/ -gist_alias_url = - -## List of controllers (using glob pattern syntax) that AUTH TOKENS could be -## used for access. -## Adding ?auth_token = to the url authenticates this request as if it -## came from the the logged in user who own this authentication token. -## -## Syntax is :. -## To enable access to raw_files put `FilesController:raw`. -## To enable access to patches add `ChangesetController:changeset_patch`. -## The list should be "," separated and on a single line. -## -## Recommended controllers to enable: -# ChangesetController:changeset_patch, -# ChangesetController:changeset_raw, -# FilesController:raw, -# FilesController:archivefile, -# GistsController:*, -api_access_controllers_whitelist = - -## default encoding used to convert from and to unicode -## can be also a comma separated list of encoding in case of mixed encodings -default_encoding = UTF-8 - -## instance-id prefix -## a prefix key for this instance used for cache invalidation when running -## multiple instances of rhodecode, make sure it's globally unique for -## all running rhodecode instances. Leave empty if you don't use it -instance_id = - -## Fallback authentication plugin. Set this to a plugin ID to force the usage -## of an authentication plugin also if it is disabled by it's settings. -## This could be useful if you are unable to log in to the system due to broken -## authentication settings. Then you can enable e.g. the internal rhodecode auth -## module to log in again and fix the settings. -## -## Available builtin plugin IDs (hash is part of the ID): -## egg:rhodecode-enterprise-ce#rhodecode -## egg:rhodecode-enterprise-ce#pam -## egg:rhodecode-enterprise-ce#ldap -## egg:rhodecode-enterprise-ce#jasig_cas -## egg:rhodecode-enterprise-ce#headers -## egg:rhodecode-enterprise-ce#crowd -#rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode - -## alternative return HTTP header for failed authentication. Default HTTP -## response is 401 HTTPUnauthorized. Currently HG clients have troubles with -## handling that causing a series of failed authentication calls. -## Set this variable to 403 to return HTTPForbidden, or any other HTTP code -## This will be served instead of default 401 on bad authnetication -auth_ret_code = - -## use special detection method when serving auth_ret_code, instead of serving -## ret_code directly, use 401 initially (Which triggers credentials prompt) -## and then serve auth_ret_code to clients -auth_ret_code_detection = false - -## locking return code. When repository is locked return this HTTP code. 2XX -## codes don't break the transactions while 4XX codes do -lock_ret_code = 423 - -## allows to change the repository location in settings page -allow_repo_location_change = true - -## allows to setup custom hooks in settings page -allow_custom_hooks_settings = true - -## generated license token, goto license page in RhodeCode settings to obtain -## new token -license_token = abra-cada-bra1-rce3 - -## supervisor connection uri, for managing supervisor and logs. -supervisor.uri = -## supervisord group name/id we only want this RC instance to handle -supervisor.group_id = dev - -## Display extended labs settings -labs_settings_active = true - -#################################### -### CELERY CONFIG #### -#################################### -use_celery = false -broker.host = localhost -broker.vhost = rabbitmqhost -broker.port = 5672 -broker.user = rabbitmq -broker.password = qweqwe - -celery.imports = rhodecode.lib.celerylib.tasks - -celery.result.backend = amqp -celery.result.dburi = amqp:// -celery.result.serialier = json - -#celery.send.task.error.emails = true -#celery.amqp.task.result.expires = 18000 - -celeryd.concurrency = 2 -#celeryd.log.file = celeryd.log -celeryd.log.level = debug -celeryd.max.tasks.per.child = 1 - -## tasks will never be sent to the queue, but executed locally instead. -celery.always.eager = false - -#################################### -### BEAKER CACHE #### -#################################### -# default cache dir for templates. Putting this into a ramdisk -## can boost performance, eg. %(here)s/data_ramdisk -cache_dir = %(here)s/data - -## locking and default file storage for Beaker. Putting this into a ramdisk -## can boost performance, eg. %(here)s/data_ramdisk/cache/beaker_data -beaker.cache.data_dir = %(here)s/rc/data/cache/beaker_data -beaker.cache.lock_dir = %(here)s/rc/data/cache/beaker_lock - -beaker.cache.regions = super_short_term, short_term, long_term, sql_cache_short, auth_plugins, repo_cache_long - -beaker.cache.super_short_term.type = memory -beaker.cache.super_short_term.expire = 1 -beaker.cache.super_short_term.key_length = 256 - -beaker.cache.short_term.type = memory -beaker.cache.short_term.expire = 60 -beaker.cache.short_term.key_length = 256 - -beaker.cache.long_term.type = memory -beaker.cache.long_term.expire = 36000 -beaker.cache.long_term.key_length = 256 - -beaker.cache.sql_cache_short.type = memory -beaker.cache.sql_cache_short.expire = 1 -beaker.cache.sql_cache_short.key_length = 256 - -## default is memory cache, configure only if required -## using multi-node or multi-worker setup -#beaker.cache.auth_plugins.type = ext:database -#beaker.cache.auth_plugins.lock_dir = %(here)s/data/cache/auth_plugin_lock -#beaker.cache.auth_plugins.url = postgresql://postgres:secret@localhost/rhodecode -#beaker.cache.auth_plugins.url = mysql://root:secret@127.0.0.1/rhodecode -#beaker.cache.auth_plugins.sa.pool_recycle = 3600 -#beaker.cache.auth_plugins.sa.pool_size = 10 -#beaker.cache.auth_plugins.sa.max_overflow = 0 - -beaker.cache.repo_cache_long.type = memorylru_base -beaker.cache.repo_cache_long.max_items = 4096 -beaker.cache.repo_cache_long.expire = 2592000 - -## default is memorylru_base cache, configure only if required -## using multi-node or multi-worker setup -#beaker.cache.repo_cache_long.type = ext:memcached -#beaker.cache.repo_cache_long.url = localhost:11211 -#beaker.cache.repo_cache_long.expire = 1209600 -#beaker.cache.repo_cache_long.key_length = 256 - -#################################### -### BEAKER SESSION #### -#################################### - -## .session.type is type of storage options for the session, current allowed -## types are file, ext:memcached, ext:database, and memory (default). -beaker.session.type = file -beaker.session.data_dir = %(here)s/rc/data/sessions/data - -## db based session, fast, and allows easy management over logged in users -#beaker.session.type = ext:database -#beaker.session.table_name = db_session -#beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode -#beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode -#beaker.session.sa.pool_recycle = 3600 -#beaker.session.sa.echo = false - -beaker.session.key = rhodecode -beaker.session.secret = test-rc-uytcxaz -beaker.session.lock_dir = %(here)s/rc/data/sessions/lock - -## Secure encrypted cookie. Requires AES and AES python libraries -## you must disable beaker.session.secret to use this -#beaker.session.encrypt_key = -#beaker.session.validate_key = - -## sets session as invalid(also logging out user) if it haven not been -## accessed for given amount of time in seconds -beaker.session.timeout = 2592000 -beaker.session.httponly = true -## Path to use for the cookie. -#beaker.session.cookie_path = / - -## uncomment for https secure cookie -beaker.session.secure = false - -## auto save the session to not to use .save() -beaker.session.auto = false - -## default cookie expiration time in seconds, set to `true` to set expire -## at browser close -#beaker.session.cookie_expires = 3600 - -################################### -## SEARCH INDEXING CONFIGURATION ## -################################### -## Full text search indexer is available in rhodecode-tools under -## `rhodecode-tools index` command - -# WHOOSH Backend, doesn't require additional services to run -# it works good with few dozen repos -search.module = rhodecode.lib.index.whoosh -search.location = %(here)s/data/index - -######################################## -### CHANNELSTREAM CONFIG #### -######################################## -## channelstream enables persistent connections and live notification -## in the system. It's also used by the chat system - -channelstream.enabled = false -# location of channelstream server on the backend -channelstream.server = 127.0.0.1:9800 -## location of the channelstream server from outside world -## most likely this would be an http server special backend URL, that handles -## websocket connections see nginx example for config -channelstream.ws_url = ws://rhodecode.yourserver.com/_channelstream -channelstream.secret = secret -channelstream.history.location = %(here)s/channelstream_history - - -################################### -## APPENLIGHT CONFIG ## -################################### - -## Appenlight is tailored to work with RhodeCode, see -## http://appenlight.com for details how to obtain an account - -## appenlight integration enabled -appenlight = false - -appenlight.server_url = https://api.appenlight.com -appenlight.api_key = YOUR_API_KEY -#appenlight.transport_config = https://api.appenlight.com?threaded=1&timeout=5 - -# used for JS client -appenlight.api_public_key = YOUR_API_PUBLIC_KEY - -## TWEAK AMOUNT OF INFO SENT HERE - -## enables 404 error logging (default False) -appenlight.report_404 = false - -## time in seconds after request is considered being slow (default 1) -appenlight.slow_request_time = 1 - -## record slow requests in application -## (needs to be enabled for slow datastore recording and time tracking) -appenlight.slow_requests = true - -## enable hooking to application loggers -appenlight.logging = true - -## minimum log level for log capture -appenlight.logging.level = WARNING - -## send logs only from erroneous/slow requests -## (saves API quota for intensive logging) -appenlight.logging_on_error = false - -## list of additonal keywords that should be grabbed from environ object -## can be string with comma separated list of words in lowercase -## (by default client will always send following info: -## 'REMOTE_USER', 'REMOTE_ADDR', 'SERVER_NAME', 'CONTENT_TYPE' + all keys that -## start with HTTP* this list be extended with additional keywords here -appenlight.environ_keys_whitelist = - -## list of keywords that should be blanked from request object -## can be string with comma separated list of words in lowercase -## (by default client will always blank keys that contain following words -## 'password', 'passwd', 'pwd', 'auth_tkt', 'secret', 'csrf' -## this list be extended with additional keywords set here -appenlight.request_keys_blacklist = - -## list of namespaces that should be ignores when gathering log entries -## can be string with comma separated list of namespaces -## (by default the client ignores own entries: appenlight_client.client) -appenlight.log_namespace_blacklist = - - -################################################################################ -## WARNING: *THE LINE BELOW MUST BE UNCOMMENTED ON A PRODUCTION ENVIRONMENT* ## -## Debug mode will enable the interactive debugging tool, allowing ANYONE to ## -## execute malicious code after an exception is raised. ## -################################################################################ -set debug = false - - -############## -## STYLING ## -############## -debug_style = false - -######################################################### -### DB CONFIGS - EACH DB WILL HAVE IT'S OWN CONFIG ### -######################################################### -#sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode_test.db -#sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode_test -#sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode_test -sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode_test.db - -# see sqlalchemy docs for other advanced settings - -## print the sql statements to output -sqlalchemy.db1.echo = false -## recycle the connections after this ammount of seconds -sqlalchemy.db1.pool_recycle = 3600 -sqlalchemy.db1.convert_unicode = true - -## the number of connections to keep open inside the connection pool. -## 0 indicates no limit -#sqlalchemy.db1.pool_size = 5 - -## the number of connections to allow in connection pool "overflow", that is -## connections that can be opened above and beyond the pool_size setting, -## which defaults to five. -#sqlalchemy.db1.max_overflow = 10 - - -################## -### VCS CONFIG ### -################## -vcs.server.enable = true -vcs.server = localhost:9901 - -## Web server connectivity protocol, responsible for web based VCS operatations -## Available protocols are: -## `pyro4` - using pyro4 server -## `http` - using http-rpc backend -vcs.server.protocol = pyro4 - -## Push/Pull operations protocol, available options are: -## `pyro4` - using pyro4 server -## `rhodecode.lib.middleware.utils.scm_app_http` - Http based, recommended -## `vcsserver.scm_app` - internal app (EE only) -vcs.scm_app_implementation = pyro4 - -## Push/Pull operations hooks protocol, available options are: -## `pyro4` - using pyro4 server -## `http` - using http-rpc backend -vcs.hooks.protocol = pyro4 - -vcs.server.log_level = debug -## Start VCSServer with this instance as a subprocess, usefull for development -vcs.start_server = true - -## List of enabled VCS backends, available options are: -## `hg` - mercurial -## `git` - git -## `svn` - subversion -vcs.backends = hg, git, svn - -vcs.connection_timeout = 3600 -## Compatibility version when creating SVN repositories. Defaults to newest version when commented out. -## Available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible -#vcs.svn.compatible_version = pre-1.8-compatible - - -############################################################ -### Subversion proxy support (mod_dav_svn) ### -### Maps RhodeCode repo groups into SVN paths for Apache ### -############################################################ -## Enable or disable the config file generation. -svn.proxy.generate_config = false -## Generate config file with `SVNListParentPath` set to `On`. -svn.proxy.list_parent_path = true -## Set location and file name of generated config file. -svn.proxy.config_file_path = %(here)s/mod_dav_svn.conf -## File system path to the directory containing the repositories served by -## RhodeCode. -svn.proxy.parent_path_root = /path/to/repo_store -## Used as a prefix to the block in the generated config file. In -## most cases it should be set to `/`. -svn.proxy.location_root = / - - -################################ -### LOGGING CONFIGURATION #### -################################ -[loggers] -keys = root, routes, rhodecode, sqlalchemy, beaker, pyro4, templates - -[handlers] -keys = console, console_sql - -[formatters] -keys = generic, color_formatter, color_formatter_sql - -############# -## LOGGERS ## -############# -[logger_root] -level = NOTSET -handlers = console - -[logger_routes] -level = DEBUG -handlers = -qualname = routes.middleware -## "level = DEBUG" logs the route matched and routing variables. -propagate = 1 - -[logger_beaker] -level = DEBUG -handlers = -qualname = beaker.container -propagate = 1 - -[logger_pyro4] -level = DEBUG -handlers = -qualname = Pyro4 -propagate = 1 - -[logger_templates] -level = INFO -handlers = -qualname = pylons.templating -propagate = 1 - -[logger_rhodecode] -level = DEBUG -handlers = -qualname = rhodecode -propagate = 1 - -[logger_sqlalchemy] -level = ERROR -handlers = console_sql -qualname = sqlalchemy.engine -propagate = 0 - -############## -## HANDLERS ## -############## - -[handler_console] -class = StreamHandler -args = (sys.stderr,) -level = DEBUG -formatter = generic - -[handler_console_sql] -class = StreamHandler -args = (sys.stderr,) -level = WARN -formatter = generic - -################ -## FORMATTERS ## -################ - -[formatter_generic] -class = rhodecode.lib.logging_formatter.Pyro4AwareFormatter -format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s -datefmt = %Y-%m-%d %H:%M:%S - -[formatter_color_formatter] -class = rhodecode.lib.logging_formatter.ColorFormatter -format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s -datefmt = %Y-%m-%d %H:%M:%S - -[formatter_color_formatter_sql] -class = rhodecode.lib.logging_formatter.ColorFormatterSql -format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s -datefmt = %Y-%m-%d %H:%M:%S