permissions: expose new view that lists all available views for usage in whitelist access.

rhodecode/templates/admin/permissions/permissions_auth_token_access.mako

@@ -0,0 +1,61 b''
+
+
+<div class="panel panel-default">
+  <div class="panel-heading">
+      <h3 class="panel-title">${_('View whitelist')}</h3>
+  </div>
+  <div class="panel-body">
+    <div class="">
+
+<p class="pr-description">
+View white list defines a set of views that can be accessed using auth token without the need to login.
+Adding ?auth_token = SECRET_TOKEN to the url authenticates this request as if it
+came from the the logged in user who owns this authentication token.
+
+E.g. adding `RepoFilesView.repo_file_raw` allows to access a raw diff using such url:
+    http[s]://server.com/{repo_name}/raw/{commit_id}/{file_path}?auth_token=SECRET_TOKEN
+
+White list can be defined inside `${c.whitelist_file}` under `${c.whitelist_key}=` setting
+
+Currently under this settings following views are set:
+</p>
+
+    <pre>
+% for entry in c.whitelist_views:
+${entry}
+% endfor
+    </pre>
+
+    </div>
+
+  </div>
+</div>
+
+
+<div class="panel panel-default">
+  <div class="panel-heading">
+      <h3 class="panel-title">${_('List of views available for usage in whitelist access')}</h3>
+  </div>
+  <div class="panel-body">
+    <div class="">
+
+
+      <table class="rctable ip-whitelist">
+        <tr>
+            <th>Active</th>
+            <th>View FQN</th>
+            <th>URL pattern</th>
+        </tr>
+
+        % for route_name, view_fqn, view_url, active in c.view_data:
+        <tr>
+            <td class="td-x">${h.bool2icon(active)}</td>
+            <td class="td-x">${view_fqn}</td>
+            <td class="td-x" title="${route_name}">${view_url}</td>
+        </tr>
+        % endfor
+      </table>
+    </div>
+
+  </div>
+</div>

configs/development.ini

@@ -1,678 +1,677 b''
 
 
 ################################################################################
 ##                 RHODECODE COMMUNITY EDITION CONFIGURATION                  ##
 # The %(here)s variable will be replaced with the parent directory of this file#
 ################################################################################
 
 [DEFAULT]
 debug = true
 
 ################################################################################
 ##                            EMAIL CONFIGURATION                             ##
 ## Uncomment and replace with the email address which should receive          ##
 ## any error reports after an application crash                               ##
 ## Additionally these settings will be used by the RhodeCode mailing system   ##
 ################################################################################
 
 ## prefix all emails subjects with given prefix, helps filtering out emails
 #email_prefix = [RhodeCode]
 
 ## email FROM address all mails will be sent
 #app_email_from = rhodecode-noreply@localhost
 
 ## Uncomment and replace with the address which should receive any error report
 ## note: using appenlight for error handling doesn't need this to be uncommented
 #email_to = admin@localhost
 
 ## in case of Application errors, sent an error email form
 #error_email_from = rhodecode_error@localhost
 
 ## additional error message to be send in case of server crash
 #error_message =
 
 
 #smtp_server = mail.server.com
 #smtp_username =
 #smtp_password =
 #smtp_port =
 #smtp_use_tls = false
 #smtp_use_ssl = true
 ## Specify available auth parameters here (e.g. LOGIN PLAIN CRAM-MD5, etc.)
 #smtp_auth =
 
 [server:main]
 ## COMMON ##
 host = 127.0.0.1
 port = 5000
 
 ##################################
 ##     WAITRESS WSGI SERVER     ##
 ## Recommended for Development  ##
 ##################################
 
 use = egg:waitress#main
 ## number of worker threads
 threads = 5
 ## MAX BODY SIZE 100GB
 max_request_body_size = 107374182400
 ## Use poll instead of select, fixes file descriptors limits problems.
 ## May not work on old windows systems.
 asyncore_use_poll = true
 
 
 ##########################
 ## GUNICORN WSGI SERVER ##
 ##########################
 ## run with gunicorn --log-config rhodecode.ini --paste rhodecode.ini
 
 #use = egg:gunicorn#main
 ## Sets the number of process workers. You must set `instance_id = *`
 ## when this option is set to more than one worker, recommended
 ## value is (2 * NUMBER_OF_CPUS + 1), eg 2CPU = 5 workers
 ## The `instance_id = *` must be set in the [app:main] section below
 #workers = 2
 ## number of threads for each of the worker, must be set to 1 for gevent
 ## generally recommened to be at 1
 #threads = 1
 ## process name
 #proc_name = rhodecode
 ## type of worker class, one of sync, gevent
 ## recommended for bigger setup is using of of other than sync one
 #worker_class = sync
 ## The maximum number of simultaneous clients. Valid only for Gevent
 #worker_connections = 10
 ## max number of requests that worker will handle before being gracefully
 ## restarted, could prevent memory leaks
 #max_requests = 1000
 #max_requests_jitter = 30
 ## amount of time a worker can spend with handling a request before it
 ## gets killed and restarted. Set to 6hrs
 #timeout = 21600
 
 
 ## prefix middleware for RhodeCode.
 ## recommended when using proxy setup.
 ## allows to set RhodeCode under a prefix in server.
 ## eg https://server.com/custom_prefix. Enable `filter-with =` option below as well.
 ## And set your prefix like: `prefix = /custom_prefix`
 ## be sure to also set beaker.session.cookie_path = /custom_prefix if you need
 ## to make your cookies only work on prefix url
 [filter:proxy-prefix]
 use = egg:PasteDeploy#prefix
 prefix = /
 
 [app:main]
 use = egg:rhodecode-enterprise-ce
 
 ## enable proxy prefix middleware, defined above
 #filter-with = proxy-prefix
 
 # During development the we want to have the debug toolbar enabled
 pyramid.includes =
     pyramid_debugtoolbar
     rhodecode.utils.debugtoolbar
     rhodecode.lib.middleware.request_wrapper
 
 pyramid.reload_templates = true
 
 debugtoolbar.hosts = 0.0.0.0/0
 debugtoolbar.exclude_prefixes =
     /css
     /fonts
     /images
     /js
 
 ## RHODECODE PLUGINS ##
 rhodecode.includes =
     rhodecode.api
 
 
 # api prefix url
 rhodecode.api.url = /_admin/api
 
 
 ## END RHODECODE PLUGINS ##
 
 ## encryption key used to encrypt social plugin tokens,
 ## remote_urls with credentials etc, if not set it defaults to
 ## `beaker.session.secret`
 #rhodecode.encrypted_values.secret =
 
 ## decryption strict mode (enabled by default). It controls if decryption raises
 ## `SignatureVerificationError` in case of wrong key, or damaged encryption data.
 #rhodecode.encrypted_values.strict = false
 
 ## return gzipped responses from Rhodecode (static files/application)
 gzip_responses = false
 
 ## autogenerate javascript routes file on startup
 generate_js_files = false
 
 ## Optional Languages
 ## en(default), be, de, es, fr, it, ja, pl, pt, ru, zh
 lang = en
 
 ## perform a full repository scan on each server start, this should be
 ## set to false after first startup, to allow faster server restarts.
 startup.import_repos = false
 
 ## Uncomment and set this path to use archive download cache.
 ## Once enabled, generated archives will be cached at this location
 ## and served from the cache during subsequent requests for the same archive of
 ## the repository.
 #archive_cache_dir = /tmp/tarballcache
 
 ## change this to unique ID for security
 app_instance_uuid = rc-production
 
 ## cut off limit for large diffs (size in bytes)
 cut_off_limit_diff = 1024000
 cut_off_limit_file = 256000
 
 ## use cache version of scm repo everywhere
 vcs_full_cache = true
 
 ## force https in RhodeCode, fixes https redirects, assumes it's always https
 ## Normally this is controlled by proper http flags sent from http server
 force_https = false
 
 ## use Strict-Transport-Security headers
 use_htsts = false
 
 ## number of commits stats will parse on each iteration
 commit_parse_limit = 25
 
 ## git rev filter option, --all is the default filter, if you need to
 ## hide all refs in changelog switch this to --branches --tags
 git_rev_filter = --branches --tags
 
 # Set to true if your repos are exposed using the dumb protocol
 git_update_server_info = false
 
 ## RSS/ATOM feed options
 rss_cut_off_limit = 256000
 rss_items_per_page = 10
 rss_include_diff = false
 
 ## gist URL alias, used to create nicer urls for gist. This should be an
 ## url that does rewrites to _admin/gists/{gistid}.
 ## example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
 ## RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/{gistid}
 gist_alias_url =
 
-## List of controllers (using glob pattern syntax) that AUTH TOKENS could be
+## List of views (using glob pattern syntax) that AUTH TOKENS could be
 ## used for access.
 ## Adding ?auth_token=TOKEN_HASH to the url authenticates this request as if it
 ## came from the the logged in user who own this authentication token.
 ##
-## Syntax is ControllerClass:function_pattern.
-## To enable access to raw_files put `FilesController:raw`.
-## To enable access to patches add `ChangesetController:changeset_patch`.
+## list of all views can be found under `_admin/permissions/auth_token_access`
 ## The list should be "," separated and on a single line.
 ##
-## Recommended controllers to enable:
-#    ChangesetController:changeset_patch,
-#    ChangesetController:changeset_raw,
-#    FilesController:raw,
-#    FilesController:archivefile,
-#    GistsController:*,
+## Most common views to enable:
+#    ChangesetController:changeset_patch
+#    ChangesetController:changeset_raw
+#    RepoFilesView.repo_files_diff
+#    RepoFilesView.repo_archivefile
+#    RepoFilesView.repo_file_raw
+#    GistView:*
 api_access_controllers_whitelist =
 
 ## default encoding used to convert from and to unicode
 ## can be also a comma separated list of encoding in case of mixed encodings
 default_encoding = UTF-8
 
 ## instance-id prefix
 ## a prefix key for this instance used for cache invalidation when running
 ## multiple instances of rhodecode, make sure it's globally unique for
 ## all running rhodecode instances. Leave empty if you don't use it
 instance_id =
 
 ## Fallback authentication plugin. Set this to a plugin ID to force the usage
 ## of an authentication plugin also if it is disabled by it's settings.
 ## This could be useful if you are unable to log in to the system due to broken
 ## authentication settings. Then you can enable e.g. the internal rhodecode auth
 ## module to log in again and fix the settings.
 ##
 ## Available builtin plugin IDs (hash is part of the ID):
 ## egg:rhodecode-enterprise-ce#rhodecode
 ## egg:rhodecode-enterprise-ce#pam
 ## egg:rhodecode-enterprise-ce#ldap
 ## egg:rhodecode-enterprise-ce#jasig_cas
 ## egg:rhodecode-enterprise-ce#headers
 ## egg:rhodecode-enterprise-ce#crowd
 #rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode
 
 ## alternative return HTTP header for failed authentication. Default HTTP
 ## response is 401 HTTPUnauthorized. Currently HG clients have troubles with
 ## handling that causing a series of failed authentication calls.
 ## Set this variable to 403 to return HTTPForbidden, or any other HTTP code
 ## This will be served instead of default 401 on bad authnetication
 auth_ret_code =
 
 ## use special detection method when serving auth_ret_code, instead of serving
 ## ret_code directly, use 401 initially (Which triggers credentials prompt)
 ## and then serve auth_ret_code to clients
 auth_ret_code_detection = false
 
 ## locking return code. When repository is locked return this HTTP code. 2XX
 ## codes don't break the transactions while 4XX codes do
 lock_ret_code = 423
 
 ## allows to change the repository location in settings page
 allow_repo_location_change = true
 
 ## allows to setup custom hooks in settings page
 allow_custom_hooks_settings = true
 
 ## generated license token, goto license page in RhodeCode settings to obtain
 ## new token
 license_token =
 
 ## supervisor connection uri, for managing supervisor and logs.
 supervisor.uri =
 ## supervisord group name/id we only want this RC instance to handle
 supervisor.group_id = dev
 
 ## Display extended labs settings
 labs_settings_active = true
 
 ####################################
 ###        CELERY CONFIG        ####
 ####################################
 use_celery = false
 broker.host = localhost
 broker.vhost = rabbitmqhost
 broker.port = 5672
 broker.user = rabbitmq
 broker.password = qweqwe
 
 celery.imports = rhodecode.lib.celerylib.tasks
 
 celery.result.backend = amqp
 celery.result.dburi = amqp://
 celery.result.serialier = json
 
 #celery.send.task.error.emails = true
 #celery.amqp.task.result.expires = 18000
 
 celeryd.concurrency = 2
 #celeryd.log.file = celeryd.log
 celeryd.log.level = debug
 celeryd.max.tasks.per.child = 1
 
 ## tasks will never be sent to the queue, but executed locally instead.
 celery.always.eager = false
 
 ####################################
 ###         BEAKER CACHE        ####
 ####################################
 # default cache dir for templates.  Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk
 cache_dir = %(here)s/data
 
 ## locking and default file storage for Beaker. Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk/cache/beaker_data
 beaker.cache.data_dir = %(here)s/data/cache/beaker_data
 beaker.cache.lock_dir = %(here)s/data/cache/beaker_lock
 
 beaker.cache.regions = super_short_term, short_term, long_term, sql_cache_short, auth_plugins, repo_cache_long
 
 beaker.cache.super_short_term.type = memory
 beaker.cache.super_short_term.expire = 10
 beaker.cache.super_short_term.key_length = 256
 
 beaker.cache.short_term.type = memory
 beaker.cache.short_term.expire = 60
 beaker.cache.short_term.key_length = 256
 
 beaker.cache.long_term.type = memory
 beaker.cache.long_term.expire = 36000
 beaker.cache.long_term.key_length = 256
 
 beaker.cache.sql_cache_short.type = memory
 beaker.cache.sql_cache_short.expire = 10
 beaker.cache.sql_cache_short.key_length = 256
 
 ## default is memory cache, configure only if required
 ## using multi-node or multi-worker setup
 #beaker.cache.auth_plugins.type = ext:database
 #beaker.cache.auth_plugins.lock_dir = %(here)s/data/cache/auth_plugin_lock
 #beaker.cache.auth_plugins.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.cache.auth_plugins.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.cache.auth_plugins.sa.pool_recycle = 3600
 #beaker.cache.auth_plugins.sa.pool_size = 10
 #beaker.cache.auth_plugins.sa.max_overflow = 0
 
 beaker.cache.repo_cache_long.type = memorylru_base
 beaker.cache.repo_cache_long.max_items = 4096
 beaker.cache.repo_cache_long.expire = 2592000
 
 ## default is memorylru_base cache, configure only if required
 ## using multi-node or multi-worker setup
 #beaker.cache.repo_cache_long.type = ext:memcached
 #beaker.cache.repo_cache_long.url = localhost:11211
 #beaker.cache.repo_cache_long.expire = 1209600
 #beaker.cache.repo_cache_long.key_length = 256
 
 ####################################
 ###       BEAKER SESSION        ####
 ####################################
 
 ## .session.type is type of storage options for the session, current allowed
 ## types are file, ext:memcached, ext:database, and memory (default).
 beaker.session.type = file
 beaker.session.data_dir = %(here)s/data/sessions/data
 
 ## db based session, fast, and allows easy management over logged in users
 #beaker.session.type = ext:database
 #beaker.session.table_name = db_session
 #beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.session.sa.pool_recycle = 3600
 #beaker.session.sa.echo = false
 
 beaker.session.key = rhodecode
 beaker.session.secret = develop-rc-uytcxaz
 beaker.session.lock_dir = %(here)s/data/sessions/lock
 
 ## Secure encrypted cookie. Requires AES and AES python libraries
 ## you must disable beaker.session.secret to use this
 #beaker.session.encrypt_key = key_for_encryption
 #beaker.session.validate_key = validation_key
 
 ## sets session as invalid(also logging out user) if it haven not been
 ## accessed for given amount of time in seconds
 beaker.session.timeout = 2592000
 beaker.session.httponly = true
 ## Path to use for the cookie. Set to prefix if you use prefix middleware
 #beaker.session.cookie_path = /custom_prefix
 
 ## uncomment for https secure cookie
 beaker.session.secure = false
 
 ## auto save the session to not to use .save()
 beaker.session.auto = false
 
 ## default cookie expiration time in seconds, set to `true` to set expire
 ## at browser close
 #beaker.session.cookie_expires = 3600
 
 ###################################
 ## SEARCH INDEXING CONFIGURATION ##
 ###################################
 ## Full text search indexer is available in rhodecode-tools under
 ## `rhodecode-tools index` command
 
 ## WHOOSH Backend, doesn't require additional services to run
 ## it works good with few dozen repos
 search.module = rhodecode.lib.index.whoosh
 search.location = %(here)s/data/index
 
 ########################################
 ###    CHANNELSTREAM CONFIG         ####
 ########################################
 ## channelstream enables persistent connections and live notification
 ## in the system. It's also used by the chat system
 channelstream.enabled = false
 
 ## server address for channelstream server on the backend
 channelstream.server = 127.0.0.1:9800
 
 ## location of the channelstream server from outside world
 ## use ws:// for http or wss:// for https. This address needs to be handled
 ## by external HTTP server such as Nginx or Apache
 ## see nginx/apache configuration examples in our docs
 channelstream.ws_url = ws://rhodecode.yourserver.com/_channelstream
 channelstream.secret = secret
 channelstream.history.location = %(here)s/channelstream_history
 
 ## Internal application path that Javascript uses to connect into.
 ## If you use proxy-prefix the prefix should be added before /_channelstream
 channelstream.proxy_path = /_channelstream
 
 
 ###################################
 ##       APPENLIGHT CONFIG       ##
 ###################################
 
 ## Appenlight is tailored to work with RhodeCode, see
 ## http://appenlight.com for details how to obtain an account
 
 ## appenlight integration enabled
 appenlight = false
 
 appenlight.server_url = https://api.appenlight.com
 appenlight.api_key = YOUR_API_KEY
 #appenlight.transport_config = https://api.appenlight.com?threaded=1&timeout=5
 
 # used for JS client
 appenlight.api_public_key = YOUR_API_PUBLIC_KEY
 
 ## TWEAK AMOUNT OF INFO SENT HERE
 
 ## enables 404 error logging (default False)
 appenlight.report_404 = false
 
 ## time in seconds after request is considered being slow (default 1)
 appenlight.slow_request_time = 1
 
 ## record slow requests in application
 ## (needs to be enabled for slow datastore recording and time tracking)
 appenlight.slow_requests = true
 
 ## enable hooking to application loggers
 appenlight.logging = true
 
 ## minimum log level for log capture
 appenlight.logging.level = WARNING
 
 ## send logs only from erroneous/slow requests
 ## (saves API quota for intensive logging)
 appenlight.logging_on_error = false
 
 ## list of additonal keywords that should be grabbed from environ object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always send following info:
 ## 'REMOTE_USER', 'REMOTE_ADDR', 'SERVER_NAME', 'CONTENT_TYPE' + all keys that
 ## start with HTTP* this list be extended with additional keywords here
 appenlight.environ_keys_whitelist =
 
 ## list of keywords that should be blanked from request object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always blank keys that contain following words
 ## 'password', 'passwd', 'pwd', 'auth_tkt', 'secret', 'csrf'
 ## this list be extended with additional keywords set here
 appenlight.request_keys_blacklist =
 
 ## list of namespaces that should be ignores when gathering log entries
 ## can be string with comma separated list of namespaces
 ## (by default the client ignores own entries: appenlight_client.client)
 appenlight.log_namespace_blacklist =
 
 
 ################################################################################
 ## WARNING: *THE LINE BELOW MUST BE UNCOMMENTED ON A PRODUCTION ENVIRONMENT*  ##
 ## Debug mode will enable the interactive debugging tool, allowing ANYONE to  ##
 ## execute malicious code after an exception is raised.                       ##
 ################################################################################
 #set debug = false
 
 
 ##############
 ## STYLING  ##
 ##############
 debug_style = true
 
 ###########################################
 ###   MAIN RHODECODE DATABASE CONFIG    ###
 ###########################################
 #sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 #sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 #sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode
 sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 
 # see sqlalchemy docs for other advanced settings
 
 ## print the sql statements to output
 sqlalchemy.db1.echo = false
 ## recycle the connections after this amount of seconds
 sqlalchemy.db1.pool_recycle = 3600
 sqlalchemy.db1.convert_unicode = true
 
 ## the number of connections to keep open inside the connection pool.
 ## 0 indicates no limit
 #sqlalchemy.db1.pool_size = 5
 
 ## the number of connections to allow in connection pool "overflow", that is
 ## connections that can be opened above and beyond the pool_size setting,
 ## which defaults to five.
 #sqlalchemy.db1.max_overflow = 10
 
 
 ##################
 ### VCS CONFIG ###
 ##################
 vcs.server.enable = true
 vcs.server = localhost:9900
 
 ## Web server connectivity protocol, responsible for web based VCS operatations
 ## Available protocols are:
 ## `http` - use http-rpc backend (default)
 vcs.server.protocol = http
 
 ## Push/Pull operations protocol, available options are:
 ## `http` - use http-rpc backend (default)
 ##
 vcs.scm_app_implementation = http
 
 ## Push/Pull operations hooks protocol, available options are:
 ## `http` - use http-rpc backend (default)
 vcs.hooks.protocol = http
 
 vcs.server.log_level = debug
 ## Start VCSServer with this instance as a subprocess, usefull for development
 vcs.start_server = true
 
 ## List of enabled VCS backends, available options are:
 ## `hg`  - mercurial
 ## `git` - git
 ## `svn` - subversion
 vcs.backends = hg, git, svn
 
 vcs.connection_timeout = 3600
 ## Compatibility version when creating SVN repositories. Defaults to newest version when commented out.
 ## Available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible
 #vcs.svn.compatible_version = pre-1.8-compatible
 
 
 ############################################################
 ### Subversion proxy support (mod_dav_svn)               ###
 ### Maps RhodeCode repo groups into SVN paths for Apache ###
 ############################################################
 ## Enable or disable the config file generation.
 svn.proxy.generate_config = false
 ## Generate config file with `SVNListParentPath` set to `On`.
 svn.proxy.list_parent_path = true
 ## Set location and file name of generated config file.
 svn.proxy.config_file_path = %(here)s/mod_dav_svn.conf
 ## Used as a prefix to the `Location` block in the generated config file.
 ## In most cases it should be set to `/`.
 svn.proxy.location_root = /
 ## Command to reload the mod dav svn configuration on change.
 ## Example: `/etc/init.d/apache2 reload`
 #svn.proxy.reload_cmd = /etc/init.d/apache2 reload
 ## If the timeout expires before the reload command finishes, the command will
 ## be killed. Setting it to zero means no timeout. Defaults to 10 seconds.
 #svn.proxy.reload_timeout = 10
 
 ## Dummy marker to add new entries after.
 ## Add any custom entries below. Please don't remove.
 custom.conf = 1
 
 
 ################################
 ### LOGGING CONFIGURATION   ####
 ################################
 [loggers]
 keys = root, routes, rhodecode, sqlalchemy, beaker, templates
 
 [handlers]
 keys = console, console_sql
 
 [formatters]
 keys = generic, color_formatter, color_formatter_sql
 
 #############
 ## LOGGERS ##
 #############
 [logger_root]
 level = NOTSET
 handlers = console
 
 [logger_routes]
 level = DEBUG
 handlers =
 qualname = routes.middleware
 ## "level = DEBUG" logs the route matched and routing variables.
 propagate = 1
 
 [logger_beaker]
 level = DEBUG
 handlers =
 qualname = beaker.container
 propagate = 1
 
 [logger_templates]
 level = INFO
 handlers =
 qualname = pylons.templating
 propagate = 1
 
 [logger_rhodecode]
 level = DEBUG
 handlers =
 qualname = rhodecode
 propagate = 1
 
 [logger_sqlalchemy]
 level = INFO
 handlers = console_sql
 qualname = sqlalchemy.engine
 propagate = 0
 
 ##############
 ## HANDLERS ##
 ##############
 
 [handler_console]
 class = StreamHandler
 args = (sys.stderr, )
 level = DEBUG
 formatter = color_formatter
 
 [handler_console_sql]
 class = StreamHandler
 args = (sys.stderr, )
 level = DEBUG
 formatter = color_formatter_sql
 
 ################
 ## FORMATTERS ##
 ################
 
 [formatter_generic]
 class = rhodecode.lib.logging_formatter.ExceptionAwareFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter]
 class = rhodecode.lib.logging_formatter.ColorFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter_sql]
 class = rhodecode.lib.logging_formatter.ColorFormatterSql
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S

configs/production.ini

@@ -1,647 +1,646 b''
 
 
 ################################################################################
 ##                 RHODECODE COMMUNITY EDITION CONFIGURATION                  ##
 # The %(here)s variable will be replaced with the parent directory of this file#
 ################################################################################
 
 [DEFAULT]
 debug = true
 
 ################################################################################
 ##                            EMAIL CONFIGURATION                             ##
 ## Uncomment and replace with the email address which should receive          ##
 ## any error reports after an application crash                               ##
 ## Additionally these settings will be used by the RhodeCode mailing system   ##
 ################################################################################
 
 ## prefix all emails subjects with given prefix, helps filtering out emails
 #email_prefix = [RhodeCode]
 
 ## email FROM address all mails will be sent
 #app_email_from = rhodecode-noreply@localhost
 
 ## Uncomment and replace with the address which should receive any error report
 ## note: using appenlight for error handling doesn't need this to be uncommented
 #email_to = admin@localhost
 
 ## in case of Application errors, sent an error email form
 #error_email_from = rhodecode_error@localhost
 
 ## additional error message to be send in case of server crash
 #error_message =
 
 
 #smtp_server = mail.server.com
 #smtp_username =
 #smtp_password =
 #smtp_port =
 #smtp_use_tls = false
 #smtp_use_ssl = true
 ## Specify available auth parameters here (e.g. LOGIN PLAIN CRAM-MD5, etc.)
 #smtp_auth =
 
 [server:main]
 ## COMMON ##
 host = 127.0.0.1
 port = 5000
 
 ##################################
 ##     WAITRESS WSGI SERVER     ##
 ## Recommended for Development  ##
 ##################################
 
 #use = egg:waitress#main
 ## number of worker threads
 #threads = 5
 ## MAX BODY SIZE 100GB
 #max_request_body_size = 107374182400
 ## Use poll instead of select, fixes file descriptors limits problems.
 ## May not work on old windows systems.
 #asyncore_use_poll = true
 
 
 ##########################
 ## GUNICORN WSGI SERVER ##
 ##########################
 ## run with gunicorn --log-config rhodecode.ini --paste rhodecode.ini
 
 use = egg:gunicorn#main
 ## Sets the number of process workers. You must set `instance_id = *`
 ## when this option is set to more than one worker, recommended
 ## value is (2 * NUMBER_OF_CPUS + 1), eg 2CPU = 5 workers
 ## The `instance_id = *` must be set in the [app:main] section below
 workers = 2
 ## number of threads for each of the worker, must be set to 1 for gevent
 ## generally recommened to be at 1
 #threads = 1
 ## process name
 proc_name = rhodecode
 ## type of worker class, one of sync, gevent
 ## recommended for bigger setup is using of of other than sync one
 worker_class = sync
 ## The maximum number of simultaneous clients. Valid only for Gevent
 #worker_connections = 10
 ## max number of requests that worker will handle before being gracefully
 ## restarted, could prevent memory leaks
 max_requests = 1000
 max_requests_jitter = 30
 ## amount of time a worker can spend with handling a request before it
 ## gets killed and restarted. Set to 6hrs
 timeout = 21600
 
 
 ## prefix middleware for RhodeCode.
 ## recommended when using proxy setup.
 ## allows to set RhodeCode under a prefix in server.
 ## eg https://server.com/custom_prefix. Enable `filter-with =` option below as well.
 ## And set your prefix like: `prefix = /custom_prefix`
 ## be sure to also set beaker.session.cookie_path = /custom_prefix if you need
 ## to make your cookies only work on prefix url
 [filter:proxy-prefix]
 use = egg:PasteDeploy#prefix
 prefix = /
 
 [app:main]
 use = egg:rhodecode-enterprise-ce
 
 ## enable proxy prefix middleware, defined above
 #filter-with = proxy-prefix
 
 ## encryption key used to encrypt social plugin tokens,
 ## remote_urls with credentials etc, if not set it defaults to
 ## `beaker.session.secret`
 #rhodecode.encrypted_values.secret =
 
 ## decryption strict mode (enabled by default). It controls if decryption raises
 ## `SignatureVerificationError` in case of wrong key, or damaged encryption data.
 #rhodecode.encrypted_values.strict = false
 
 ## return gzipped responses from Rhodecode (static files/application)
 gzip_responses = false
 
 ## autogenerate javascript routes file on startup
 generate_js_files = false
 
 ## Optional Languages
 ## en(default), be, de, es, fr, it, ja, pl, pt, ru, zh
 lang = en
 
 ## perform a full repository scan on each server start, this should be
 ## set to false after first startup, to allow faster server restarts.
 startup.import_repos = false
 
 ## Uncomment and set this path to use archive download cache.
 ## Once enabled, generated archives will be cached at this location
 ## and served from the cache during subsequent requests for the same archive of
 ## the repository.
 #archive_cache_dir = /tmp/tarballcache
 
 ## change this to unique ID for security
 app_instance_uuid = rc-production
 
 ## cut off limit for large diffs (size in bytes)
 cut_off_limit_diff = 1024000
 cut_off_limit_file = 256000
 
 ## use cache version of scm repo everywhere
 vcs_full_cache = true
 
 ## force https in RhodeCode, fixes https redirects, assumes it's always https
 ## Normally this is controlled by proper http flags sent from http server
 force_https = false
 
 ## use Strict-Transport-Security headers
 use_htsts = false
 
 ## number of commits stats will parse on each iteration
 commit_parse_limit = 25
 
 ## git rev filter option, --all is the default filter, if you need to
 ## hide all refs in changelog switch this to --branches --tags
 git_rev_filter = --branches --tags
 
 # Set to true if your repos are exposed using the dumb protocol
 git_update_server_info = false
 
 ## RSS/ATOM feed options
 rss_cut_off_limit = 256000
 rss_items_per_page = 10
 rss_include_diff = false
 
 ## gist URL alias, used to create nicer urls for gist. This should be an
 ## url that does rewrites to _admin/gists/{gistid}.
 ## example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
 ## RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/{gistid}
 gist_alias_url =
 
-## List of controllers (using glob pattern syntax) that AUTH TOKENS could be
+## List of views (using glob pattern syntax) that AUTH TOKENS could be
 ## used for access.
 ## Adding ?auth_token=TOKEN_HASH to the url authenticates this request as if it
 ## came from the the logged in user who own this authentication token.
 ##
-## Syntax is ControllerClass:function_pattern.
-## To enable access to raw_files put `FilesController:raw`.
-## To enable access to patches add `ChangesetController:changeset_patch`.
+## list of all views can be found under `_admin/permissions/auth_token_access`
 ## The list should be "," separated and on a single line.
 ##
-## Recommended controllers to enable:
-#    ChangesetController:changeset_patch,
-#    ChangesetController:changeset_raw,
-#    FilesController:raw,
-#    FilesController:archivefile,
-#    GistsController:*,
+## Most common views to enable:
+#    ChangesetController:changeset_patch
+#    ChangesetController:changeset_raw
+#    RepoFilesView.repo_files_diff
+#    RepoFilesView.repo_archivefile
+#    RepoFilesView.repo_file_raw
+#    GistView:*
 api_access_controllers_whitelist =
 
 ## default encoding used to convert from and to unicode
 ## can be also a comma separated list of encoding in case of mixed encodings
 default_encoding = UTF-8
 
 ## instance-id prefix
 ## a prefix key for this instance used for cache invalidation when running
 ## multiple instances of rhodecode, make sure it's globally unique for
 ## all running rhodecode instances. Leave empty if you don't use it
 instance_id =
 
 ## Fallback authentication plugin. Set this to a plugin ID to force the usage
 ## of an authentication plugin also if it is disabled by it's settings.
 ## This could be useful if you are unable to log in to the system due to broken
 ## authentication settings. Then you can enable e.g. the internal rhodecode auth
 ## module to log in again and fix the settings.
 ##
 ## Available builtin plugin IDs (hash is part of the ID):
 ## egg:rhodecode-enterprise-ce#rhodecode
 ## egg:rhodecode-enterprise-ce#pam
 ## egg:rhodecode-enterprise-ce#ldap
 ## egg:rhodecode-enterprise-ce#jasig_cas
 ## egg:rhodecode-enterprise-ce#headers
 ## egg:rhodecode-enterprise-ce#crowd
 #rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode
 
 ## alternative return HTTP header for failed authentication. Default HTTP
 ## response is 401 HTTPUnauthorized. Currently HG clients have troubles with
 ## handling that causing a series of failed authentication calls.
 ## Set this variable to 403 to return HTTPForbidden, or any other HTTP code
 ## This will be served instead of default 401 on bad authnetication
 auth_ret_code =
 
 ## use special detection method when serving auth_ret_code, instead of serving
 ## ret_code directly, use 401 initially (Which triggers credentials prompt)
 ## and then serve auth_ret_code to clients
 auth_ret_code_detection = false
 
 ## locking return code. When repository is locked return this HTTP code. 2XX
 ## codes don't break the transactions while 4XX codes do
 lock_ret_code = 423
 
 ## allows to change the repository location in settings page
 allow_repo_location_change = true
 
 ## allows to setup custom hooks in settings page
 allow_custom_hooks_settings = true
 
 ## generated license token, goto license page in RhodeCode settings to obtain
 ## new token
 license_token =
 
 ## supervisor connection uri, for managing supervisor and logs.
 supervisor.uri =
 ## supervisord group name/id we only want this RC instance to handle
 supervisor.group_id = prod
 
 ## Display extended labs settings
 labs_settings_active = true
 
 ####################################
 ###        CELERY CONFIG        ####
 ####################################
 use_celery = false
 broker.host = localhost
 broker.vhost = rabbitmqhost
 broker.port = 5672
 broker.user = rabbitmq
 broker.password = qweqwe
 
 celery.imports = rhodecode.lib.celerylib.tasks
 
 celery.result.backend = amqp
 celery.result.dburi = amqp://
 celery.result.serialier = json
 
 #celery.send.task.error.emails = true
 #celery.amqp.task.result.expires = 18000
 
 celeryd.concurrency = 2
 #celeryd.log.file = celeryd.log
 celeryd.log.level = debug
 celeryd.max.tasks.per.child = 1
 
 ## tasks will never be sent to the queue, but executed locally instead.
 celery.always.eager = false
 
 ####################################
 ###         BEAKER CACHE        ####
 ####################################
 # default cache dir for templates.  Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk
 cache_dir = %(here)s/data
 
 ## locking and default file storage for Beaker. Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk/cache/beaker_data
 beaker.cache.data_dir = %(here)s/data/cache/beaker_data
 beaker.cache.lock_dir = %(here)s/data/cache/beaker_lock
 
 beaker.cache.regions = super_short_term, short_term, long_term, sql_cache_short, auth_plugins, repo_cache_long
 
 beaker.cache.super_short_term.type = memory
 beaker.cache.super_short_term.expire = 10
 beaker.cache.super_short_term.key_length = 256
 
 beaker.cache.short_term.type = memory
 beaker.cache.short_term.expire = 60
 beaker.cache.short_term.key_length = 256
 
 beaker.cache.long_term.type = memory
 beaker.cache.long_term.expire = 36000
 beaker.cache.long_term.key_length = 256
 
 beaker.cache.sql_cache_short.type = memory
 beaker.cache.sql_cache_short.expire = 10
 beaker.cache.sql_cache_short.key_length = 256
 
 ## default is memory cache, configure only if required
 ## using multi-node or multi-worker setup
 #beaker.cache.auth_plugins.type = ext:database
 #beaker.cache.auth_plugins.lock_dir = %(here)s/data/cache/auth_plugin_lock
 #beaker.cache.auth_plugins.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.cache.auth_plugins.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.cache.auth_plugins.sa.pool_recycle = 3600
 #beaker.cache.auth_plugins.sa.pool_size = 10
 #beaker.cache.auth_plugins.sa.max_overflow = 0
 
 beaker.cache.repo_cache_long.type = memorylru_base
 beaker.cache.repo_cache_long.max_items = 4096
 beaker.cache.repo_cache_long.expire = 2592000
 
 ## default is memorylru_base cache, configure only if required
 ## using multi-node or multi-worker setup
 #beaker.cache.repo_cache_long.type = ext:memcached
 #beaker.cache.repo_cache_long.url = localhost:11211
 #beaker.cache.repo_cache_long.expire = 1209600
 #beaker.cache.repo_cache_long.key_length = 256
 
 ####################################
 ###       BEAKER SESSION        ####
 ####################################
 
 ## .session.type is type of storage options for the session, current allowed
 ## types are file, ext:memcached, ext:database, and memory (default).
 beaker.session.type = file
 beaker.session.data_dir = %(here)s/data/sessions/data
 
 ## db based session, fast, and allows easy management over logged in users
 #beaker.session.type = ext:database
 #beaker.session.table_name = db_session
 #beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.session.sa.pool_recycle = 3600
 #beaker.session.sa.echo = false
 
 beaker.session.key = rhodecode
 beaker.session.secret = production-rc-uytcxaz
 beaker.session.lock_dir = %(here)s/data/sessions/lock
 
 ## Secure encrypted cookie. Requires AES and AES python libraries
 ## you must disable beaker.session.secret to use this
 #beaker.session.encrypt_key = key_for_encryption
 #beaker.session.validate_key = validation_key
 
 ## sets session as invalid(also logging out user) if it haven not been
 ## accessed for given amount of time in seconds
 beaker.session.timeout = 2592000
 beaker.session.httponly = true
 ## Path to use for the cookie. Set to prefix if you use prefix middleware
 #beaker.session.cookie_path = /custom_prefix
 
 ## uncomment for https secure cookie
 beaker.session.secure = false
 
 ## auto save the session to not to use .save()
 beaker.session.auto = false
 
 ## default cookie expiration time in seconds, set to `true` to set expire
 ## at browser close
 #beaker.session.cookie_expires = 3600
 
 ###################################
 ## SEARCH INDEXING CONFIGURATION ##
 ###################################
 ## Full text search indexer is available in rhodecode-tools under
 ## `rhodecode-tools index` command
 
 ## WHOOSH Backend, doesn't require additional services to run
 ## it works good with few dozen repos
 search.module = rhodecode.lib.index.whoosh
 search.location = %(here)s/data/index
 
 ########################################
 ###    CHANNELSTREAM CONFIG         ####
 ########################################
 ## channelstream enables persistent connections and live notification
 ## in the system. It's also used by the chat system
 channelstream.enabled = false
 
 ## server address for channelstream server on the backend
 channelstream.server = 127.0.0.1:9800
 
 ## location of the channelstream server from outside world
 ## use ws:// for http or wss:// for https. This address needs to be handled
 ## by external HTTP server such as Nginx or Apache
 ## see nginx/apache configuration examples in our docs
 channelstream.ws_url = ws://rhodecode.yourserver.com/_channelstream
 channelstream.secret = secret
 channelstream.history.location = %(here)s/channelstream_history
 
 ## Internal application path that Javascript uses to connect into.
 ## If you use proxy-prefix the prefix should be added before /_channelstream
 channelstream.proxy_path = /_channelstream
 
 
 ###################################
 ##       APPENLIGHT CONFIG       ##
 ###################################
 
 ## Appenlight is tailored to work with RhodeCode, see
 ## http://appenlight.com for details how to obtain an account
 
 ## appenlight integration enabled
 appenlight = false
 
 appenlight.server_url = https://api.appenlight.com
 appenlight.api_key = YOUR_API_KEY
 #appenlight.transport_config = https://api.appenlight.com?threaded=1&timeout=5
 
 # used for JS client
 appenlight.api_public_key = YOUR_API_PUBLIC_KEY
 
 ## TWEAK AMOUNT OF INFO SENT HERE
 
 ## enables 404 error logging (default False)
 appenlight.report_404 = false
 
 ## time in seconds after request is considered being slow (default 1)
 appenlight.slow_request_time = 1
 
 ## record slow requests in application
 ## (needs to be enabled for slow datastore recording and time tracking)
 appenlight.slow_requests = true
 
 ## enable hooking to application loggers
 appenlight.logging = true
 
 ## minimum log level for log capture
 appenlight.logging.level = WARNING
 
 ## send logs only from erroneous/slow requests
 ## (saves API quota for intensive logging)
 appenlight.logging_on_error = false
 
 ## list of additonal keywords that should be grabbed from environ object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always send following info:
 ## 'REMOTE_USER', 'REMOTE_ADDR', 'SERVER_NAME', 'CONTENT_TYPE' + all keys that
 ## start with HTTP* this list be extended with additional keywords here
 appenlight.environ_keys_whitelist =
 
 ## list of keywords that should be blanked from request object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always blank keys that contain following words
 ## 'password', 'passwd', 'pwd', 'auth_tkt', 'secret', 'csrf'
 ## this list be extended with additional keywords set here
 appenlight.request_keys_blacklist =
 
 ## list of namespaces that should be ignores when gathering log entries
 ## can be string with comma separated list of namespaces
 ## (by default the client ignores own entries: appenlight_client.client)
 appenlight.log_namespace_blacklist =
 
 
 ################################################################################
 ## WARNING: *THE LINE BELOW MUST BE UNCOMMENTED ON A PRODUCTION ENVIRONMENT*  ##
 ## Debug mode will enable the interactive debugging tool, allowing ANYONE to  ##
 ## execute malicious code after an exception is raised.                       ##
 ################################################################################
 set debug = false
 
 
 ###########################################
 ###   MAIN RHODECODE DATABASE CONFIG    ###
 ###########################################
 #sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 #sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 #sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode
 sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 
 # see sqlalchemy docs for other advanced settings
 
 ## print the sql statements to output
 sqlalchemy.db1.echo = false
 ## recycle the connections after this amount of seconds
 sqlalchemy.db1.pool_recycle = 3600
 sqlalchemy.db1.convert_unicode = true
 
 ## the number of connections to keep open inside the connection pool.
 ## 0 indicates no limit
 #sqlalchemy.db1.pool_size = 5
 
 ## the number of connections to allow in connection pool "overflow", that is
 ## connections that can be opened above and beyond the pool_size setting,
 ## which defaults to five.
 #sqlalchemy.db1.max_overflow = 10
 
 
 ##################
 ### VCS CONFIG ###
 ##################
 vcs.server.enable = true
 vcs.server = localhost:9900
 
 ## Web server connectivity protocol, responsible for web based VCS operatations
 ## Available protocols are:
 ## `http` - use http-rpc backend (default)
 vcs.server.protocol = http
 
 ## Push/Pull operations protocol, available options are:
 ## `http` - use http-rpc backend (default)
 ##
 vcs.scm_app_implementation = http
 
 ## Push/Pull operations hooks protocol, available options are:
 ## `http` - use http-rpc backend (default)
 vcs.hooks.protocol = http
 
 vcs.server.log_level = info
 ## Start VCSServer with this instance as a subprocess, usefull for development
 vcs.start_server = false
 
 ## List of enabled VCS backends, available options are:
 ## `hg`  - mercurial
 ## `git` - git
 ## `svn` - subversion
 vcs.backends = hg, git, svn
 
 vcs.connection_timeout = 3600
 ## Compatibility version when creating SVN repositories. Defaults to newest version when commented out.
 ## Available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible
 #vcs.svn.compatible_version = pre-1.8-compatible
 
 
 ############################################################
 ### Subversion proxy support (mod_dav_svn)               ###
 ### Maps RhodeCode repo groups into SVN paths for Apache ###
 ############################################################
 ## Enable or disable the config file generation.
 svn.proxy.generate_config = false
 ## Generate config file with `SVNListParentPath` set to `On`.
 svn.proxy.list_parent_path = true
 ## Set location and file name of generated config file.
 svn.proxy.config_file_path = %(here)s/mod_dav_svn.conf
 ## Used as a prefix to the `Location` block in the generated config file.
 ## In most cases it should be set to `/`.
 svn.proxy.location_root = /
 ## Command to reload the mod dav svn configuration on change.
 ## Example: `/etc/init.d/apache2 reload`
 #svn.proxy.reload_cmd = /etc/init.d/apache2 reload
 ## If the timeout expires before the reload command finishes, the command will
 ## be killed. Setting it to zero means no timeout. Defaults to 10 seconds.
 #svn.proxy.reload_timeout = 10
 
 ## Dummy marker to add new entries after.
 ## Add any custom entries below. Please don't remove.
 custom.conf = 1
 
 
 ################################
 ### LOGGING CONFIGURATION   ####
 ################################
 [loggers]
 keys = root, routes, rhodecode, sqlalchemy, beaker, templates
 
 [handlers]
 keys = console, console_sql
 
 [formatters]
 keys = generic, color_formatter, color_formatter_sql
 
 #############
 ## LOGGERS ##
 #############
 [logger_root]
 level = NOTSET
 handlers = console
 
 [logger_routes]
 level = DEBUG
 handlers =
 qualname = routes.middleware
 ## "level = DEBUG" logs the route matched and routing variables.
 propagate = 1
 
 [logger_beaker]
 level = DEBUG
 handlers =
 qualname = beaker.container
 propagate = 1
 
 [logger_templates]
 level = INFO
 handlers =
 qualname = pylons.templating
 propagate = 1
 
 [logger_rhodecode]
 level = DEBUG
 handlers =
 qualname = rhodecode
 propagate = 1
 
 [logger_sqlalchemy]
 level = INFO
 handlers = console_sql
 qualname = sqlalchemy.engine
 propagate = 0
 
 ##############
 ## HANDLERS ##
 ##############
 
 [handler_console]
 class = StreamHandler
 args = (sys.stderr, )
 level = INFO
 formatter = generic
 
 [handler_console_sql]
 class = StreamHandler
 args = (sys.stderr, )
 level = WARN
 formatter = generic
 
 ################
 ## FORMATTERS ##
 ################
 
 [formatter_generic]
 class = rhodecode.lib.logging_formatter.ExceptionAwareFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter]
 class = rhodecode.lib.logging_formatter.ColorFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter_sql]
 class = rhodecode.lib.logging_formatter.ColorFormatterSql
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S

rhodecode/apps/admin/__init__.py

@@ -1,175 +1,179 b''
 # -*- coding: utf-8 -*-
 
 # Copyright (C) 2016-2017  RhodeCode GmbH
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU Affero General Public License, version 3
 # (only), as published by the Free Software Foundation.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU Affero General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #
 # This program is dual-licensed. If you wish to learn more about the
 # RhodeCode Enterprise Edition, including its added features, Support services,
 # and proprietary license terms, please see https://rhodecode.com/licenses/
 
 
 from rhodecode.apps.admin.navigation import NavigationRegistry
 from rhodecode.config.routing import ADMIN_PREFIX
 from rhodecode.lib.utils2 import str2bool
 
 
 def admin_routes(config):
     """
     Admin prefixed routes
     """
 
     config.add_route(
         name='admin_audit_logs',
         pattern='/audit_logs')
 
     config.add_route(
         name='pull_requests_global_0',  # backward compat
         pattern='/pull_requests/{pull_request_id:[0-9]+}')
     config.add_route(
         name='pull_requests_global_1',  # backward compat
         pattern='/pull-requests/{pull_request_id:[0-9]+}')
     config.add_route(
         name='pull_requests_global',
         pattern='/pull-request/{pull_request_id:[0-9]+}')
 
     config.add_route(
         name='admin_settings_open_source',
         pattern='/settings/open_source')
     config.add_route(
         name='admin_settings_vcs_svn_generate_cfg',
         pattern='/settings/vcs/svn_generate_cfg')
 
     config.add_route(
         name='admin_settings_system',
         pattern='/settings/system')
     config.add_route(
         name='admin_settings_system_update',
         pattern='/settings/system/updates')
 
     config.add_route(
         name='admin_settings_sessions',
         pattern='/settings/sessions')
     config.add_route(
         name='admin_settings_sessions_cleanup',
         pattern='/settings/sessions/cleanup')
 
     config.add_route(
         name='admin_settings_process_management',
         pattern='/settings/process_management')
     config.add_route(
         name='admin_settings_process_management_signal',
         pattern='/settings/process_management/signal')
 
     # global permissions
 
     config.add_route(
         name='admin_permissions_application',
         pattern='/permissions/application')
     config.add_route(
         name='admin_permissions_application_update',
         pattern='/permissions/application/update')
 
     config.add_route(
         name='admin_permissions_global',
         pattern='/permissions/global')
     config.add_route(
         name='admin_permissions_global_update',
         pattern='/permissions/global/update')
 
     config.add_route(
         name='admin_permissions_object',
         pattern='/permissions/object')
     config.add_route(
         name='admin_permissions_object_update',
         pattern='/permissions/object/update')
 
     config.add_route(
         name='admin_permissions_ips',
         pattern='/permissions/ips')
 
     config.add_route(
         name='admin_permissions_overview',
         pattern='/permissions/overview')
 
+    config.add_route(
+        name='admin_permissions_auth_token_access',
+        pattern='/permissions/auth_token_access')
+
     # users admin
     config.add_route(
         name='users',
         pattern='/users')
 
     config.add_route(
         name='users_data',
         pattern='/users_data')
 
     # user auth tokens
     config.add_route(
         name='edit_user_auth_tokens',
         pattern='/users/{user_id:\d+}/edit/auth_tokens')
     config.add_route(
         name='edit_user_auth_tokens_add',
         pattern='/users/{user_id:\d+}/edit/auth_tokens/new')
     config.add_route(
         name='edit_user_auth_tokens_delete',
         pattern='/users/{user_id:\d+}/edit/auth_tokens/delete')
 
     # user emails
     config.add_route(
         name='edit_user_emails',
         pattern='/users/{user_id:\d+}/edit/emails')
     config.add_route(
         name='edit_user_emails_add',
         pattern='/users/{user_id:\d+}/edit/emails/new')
     config.add_route(
         name='edit_user_emails_delete',
         pattern='/users/{user_id:\d+}/edit/emails/delete')
 
     # user IPs
     config.add_route(
         name='edit_user_ips',
         pattern='/users/{user_id:\d+}/edit/ips')
     config.add_route(
         name='edit_user_ips_add',
         pattern='/users/{user_id:\d+}/edit/ips/new')
     config.add_route(
         name='edit_user_ips_delete',
         pattern='/users/{user_id:\d+}/edit/ips/delete')
 
     # user groups management
     config.add_route(
         name='edit_user_groups_management',
         pattern='/users/{user_id:\d+}/edit/groups_management')
 
     config.add_route(
         name='edit_user_groups_management_updates',
         pattern='/users/{user_id:\d+}/edit/edit_user_groups_management/updates')
 
     # user audit logs
     config.add_route(
         name='edit_user_audit_logs',
         pattern='/users/{user_id:\d+}/edit/audit')
 
 
 def includeme(config):
     settings = config.get_settings()
 
     # Create admin navigation registry and add it to the pyramid registry.
     labs_active = str2bool(settings.get('labs_settings_active', False))
     navigation_registry = NavigationRegistry(labs_active=labs_active)
     config.registry.registerUtility(navigation_registry)
 
     # main admin routes
     config.add_route(name='admin_home', pattern=ADMIN_PREFIX)
     config.include(admin_routes, route_prefix=ADMIN_PREFIX)
 
     # Scan module for configuration decorators.
     config.scan()

rhodecode/apps/admin/views/permissions.py

@@ -1,310 +1,369 b''
 # -*- coding: utf-8 -*-
 
 # Copyright (C) 2016-2017  RhodeCode GmbH
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU Affero General Public License, version 3
 # (only), as published by the Free Software Foundation.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU Affero General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #
 # This program is dual-licensed. If you wish to learn more about the
 # RhodeCode Enterprise Edition, including its added features, Support services,
 # and proprietary license terms, please see https://rhodecode.com/licenses/
 
+import re
 import logging
 import formencode
+from pyramid.interfaces import IRoutesMapper
 
 from pyramid.view import view_config
 from pyramid.httpexceptions import HTTPFound
 from pyramid.renderers import render
 from pyramid.response import Response
 
 from rhodecode.apps._base import BaseAppView
 
 from rhodecode.lib import helpers as h
 from rhodecode.lib.auth import (
     LoginRequired, HasPermissionAllDecorator, CSRFRequired)
+from rhodecode.lib.utils2 import aslist
 from rhodecode.model.db import User, UserIpMap
 from rhodecode.model.forms import (
     ApplicationPermissionsForm, ObjectPermissionsForm, UserPermissionsForm)
 from rhodecode.model.meta import Session
 from rhodecode.model.permission import PermissionModel
 from rhodecode.model.settings import SettingsModel
 
 
 log = logging.getLogger(__name__)
 
 
 class AdminPermissionsView(BaseAppView):
     def load_default_context(self):
         c = self._get_local_tmpl_context()
 
         self._register_global_c(c)
         PermissionModel().set_global_permission_choices(
             c, gettext_translator=self.request.translate)
         return c
 
     @LoginRequired()
     @HasPermissionAllDecorator('hg.admin')
     @view_config(
         route_name='admin_permissions_application', request_method='GET',
         renderer='rhodecode:templates/admin/permissions/permissions.mako')
     def permissions_application(self):
         c = self.load_default_context()
         c.active = 'application'
 
         c.user = User.get_default_user(refresh=True)
 
         app_settings = SettingsModel().get_all_settings()
         defaults = {
             'anonymous': c.user.active,
             'default_register_message': app_settings.get(
                 'rhodecode_register_message')
         }
         defaults.update(c.user.get_default_perms())
 
         data = render('rhodecode:templates/admin/permissions/permissions.mako',
                       self._get_template_context(c), self.request)
         html = formencode.htmlfill.render(
             data,
             defaults=defaults,
             encoding="UTF-8",
             force_defaults=False
         )
         return Response(html)
 
     @LoginRequired()
     @HasPermissionAllDecorator('hg.admin')
     @CSRFRequired()
     @view_config(
         route_name='admin_permissions_application_update', request_method='POST',
         renderer='rhodecode:templates/admin/permissions/permissions.mako')
     def permissions_application_update(self):
         _ = self.request.translate
         c = self.load_default_context()
         c.active = 'application'
 
         _form = ApplicationPermissionsForm(
             [x[0] for x in c.register_choices],
             [x[0] for x in c.password_reset_choices],
             [x[0] for x in c.extern_activate_choices])()
 
         try:
             form_result = _form.to_python(dict(self.request.POST))
             form_result.update({'perm_user_name': User.DEFAULT_USER})
             PermissionModel().update_application_permissions(form_result)
 
             settings = [
                 ('register_message', 'default_register_message'),
             ]
             for setting, form_key in settings:
                 sett = SettingsModel().create_or_update_setting(
                     setting, form_result[form_key])
                 Session().add(sett)
 
             Session().commit()
             h.flash(_('Application permissions updated successfully'),
                     category='success')
 
         except formencode.Invalid as errors:
             defaults = errors.value
 
             data = render(
                 'rhodecode:templates/admin/permissions/permissions.mako',
                 self._get_template_context(c), self.request)
             html = formencode.htmlfill.render(
                 data,
                 defaults=defaults,
                 errors=errors.error_dict or {},
                 prefix_error=False,
                 encoding="UTF-8",
                 force_defaults=False
             )
             return Response(html)
 
         except Exception:
             log.exception("Exception during update of permissions")
             h.flash(_('Error occurred during update of permissions'),
                     category='error')
 
         raise HTTPFound(h.route_path('admin_permissions_application'))
 
     @LoginRequired()
     @HasPermissionAllDecorator('hg.admin')
     @view_config(
         route_name='admin_permissions_object', request_method='GET',
         renderer='rhodecode:templates/admin/permissions/permissions.mako')
     def permissions_objects(self):
         c = self.load_default_context()
         c.active = 'objects'
 
         c.user = User.get_default_user(refresh=True)
         defaults = {}
         defaults.update(c.user.get_default_perms())
 
         data = render(
             'rhodecode:templates/admin/permissions/permissions.mako',
             self._get_template_context(c), self.request)
         html = formencode.htmlfill.render(
             data,
             defaults=defaults,
             encoding="UTF-8",
             force_defaults=False
         )
         return Response(html)
 
     @LoginRequired()
     @HasPermissionAllDecorator('hg.admin')
     @CSRFRequired()
     @view_config(
         route_name='admin_permissions_object_update', request_method='POST',
         renderer='rhodecode:templates/admin/permissions/permissions.mako')
     def permissions_objects_update(self):
         _ = self.request.translate
         c = self.load_default_context()
         c.active = 'objects'
 
         _form = ObjectPermissionsForm(
             [x[0] for x in c.repo_perms_choices],
             [x[0] for x in c.group_perms_choices],
             [x[0] for x in c.user_group_perms_choices])()
 
         try:
             form_result = _form.to_python(dict(self.request.POST))
             form_result.update({'perm_user_name': User.DEFAULT_USER})
             PermissionModel().update_object_permissions(form_result)
 
             Session().commit()
             h.flash(_('Object permissions updated successfully'),
                     category='success')
 
         except formencode.Invalid as errors:
             defaults = errors.value
 
             data = render(
                 'rhodecode:templates/admin/permissions/permissions.mako',
                 self._get_template_context(c), self.request)
             html = formencode.htmlfill.render(
                 data,
                 defaults=defaults,
                 errors=errors.error_dict or {},
                 prefix_error=False,
                 encoding="UTF-8",
                 force_defaults=False
             )
             return Response(html)
         except Exception:
             log.exception("Exception during update of permissions")
             h.flash(_('Error occurred during update of permissions'),
                     category='error')
 
         raise HTTPFound(h.route_path('admin_permissions_object'))
 
     @LoginRequired()
     @HasPermissionAllDecorator('hg.admin')
     @view_config(
         route_name='admin_permissions_global', request_method='GET',
         renderer='rhodecode:templates/admin/permissions/permissions.mako')
     def permissions_global(self):
         c = self.load_default_context()
         c.active = 'global'
 
         c.user = User.get_default_user(refresh=True)
         defaults = {}
         defaults.update(c.user.get_default_perms())
 
         data = render(
             'rhodecode:templates/admin/permissions/permissions.mako',
             self._get_template_context(c), self.request)
         html = formencode.htmlfill.render(
             data,
             defaults=defaults,
             encoding="UTF-8",
             force_defaults=False
         )
         return Response(html)
 
     @LoginRequired()
     @HasPermissionAllDecorator('hg.admin')
     @CSRFRequired()
     @view_config(
         route_name='admin_permissions_global_update', request_method='POST',
         renderer='rhodecode:templates/admin/permissions/permissions.mako')
     def permissions_global_update(self):
         _ = self.request.translate
         c = self.load_default_context()
         c.active = 'global'
 
         _form = UserPermissionsForm(
             [x[0] for x in c.repo_create_choices],
             [x[0] for x in c.repo_create_on_write_choices],
             [x[0] for x in c.repo_group_create_choices],
             [x[0] for x in c.user_group_create_choices],
             [x[0] for x in c.fork_choices],
             [x[0] for x in c.inherit_default_permission_choices])()
 
         try:
             form_result = _form.to_python(dict(self.request.POST))
             form_result.update({'perm_user_name': User.DEFAULT_USER})
             PermissionModel().update_user_permissions(form_result)
 
             Session().commit()
             h.flash(_('Global permissions updated successfully'),
                     category='success')
 
         except formencode.Invalid as errors:
             defaults = errors.value
 
             data = render(
                 'rhodecode:templates/admin/permissions/permissions.mako',
                 self._get_template_context(c), self.request)
             html = formencode.htmlfill.render(
                 data,
                 defaults=defaults,
                 errors=errors.error_dict or {},
                 prefix_error=False,
                 encoding="UTF-8",
                 force_defaults=False
             )
             return Response(html)
         except Exception:
             log.exception("Exception during update of permissions")
             h.flash(_('Error occurred during update of permissions'),
                     category='error')
 
         raise HTTPFound(h.route_path('admin_permissions_global'))
 
     @LoginRequired()
     @HasPermissionAllDecorator('hg.admin')
     @view_config(
         route_name='admin_permissions_ips', request_method='GET',
         renderer='rhodecode:templates/admin/permissions/permissions.mako')
     def permissions_ips(self):
         c = self.load_default_context()
         c.active = 'ips'
 
         c.user = User.get_default_user(refresh=True)
         c.user_ip_map = (
             UserIpMap.query().filter(UserIpMap.user == c.user).all())
 
         return self._get_template_context(c)
 
     @LoginRequired()
     @HasPermissionAllDecorator('hg.admin')
     @view_config(
         route_name='admin_permissions_overview', request_method='GET',
         renderer='rhodecode:templates/admin/permissions/permissions.mako')
     def permissions_overview(self):
         c = self.load_default_context()
         c.active = 'perms'
 
         c.user = User.get_default_user(refresh=True)
         c.perm_user = c.user.AuthUser
         return self._get_template_context(c)
+
+    @LoginRequired()
+    @HasPermissionAllDecorator('hg.admin')
+    @view_config(
+        route_name='admin_permissions_auth_token_access', request_method='GET',
+        renderer='rhodecode:templates/admin/permissions/permissions.mako')
+    def auth_token_access(self):
+        from rhodecode import CONFIG
+
+        c = self.load_default_context()
+        c.active = 'auth_token_access'
+
+        c.user = User.get_default_user(refresh=True)
+        c.perm_user = c.user.AuthUser
+
+        mapper = self.request.registry.queryUtility(IRoutesMapper)
+        c.view_data = []
+
+        _argument_prog = re.compile('\{(.*?)\}|:\((.*)\)')
+        introspector = self.request.registry.introspector
+
+        view_intr = {}
+        for view_data in introspector.get_category('views'):
+            intr = view_data['introspectable']
+
+            if 'route_name' in intr and intr['attr']:
+                view_intr[intr['route_name']] = '{}.{}'.format(
+                    str(intr['derived_callable'].func_name), intr['attr']
+                )
+
+        c.whitelist_key = 'api_access_controllers_whitelist'
+        c.whitelist_file = CONFIG.get('__file__')
+        whitelist_views = aslist(
+            CONFIG.get(c.whitelist_key), sep=',')
+
+        for route_info in mapper.get_routes():
+            if not route_info.name.startswith('__'):
+                routepath = route_info.pattern
+
+                def replace(matchobj):
+                    if matchobj.group(1):
+                        return "{%s}" % matchobj.group(1).split(':')[0]
+                    else:
+                        return "{%s}" % matchobj.group(2)
+
+                routepath = _argument_prog.sub(replace, routepath)
+
+                if not routepath.startswith('/'):
+                    routepath = '/' + routepath
+
+                view_fqn = view_intr.get(route_info.name, 'NOT AVAILABLE')
+                active = view_fqn in whitelist_views
+                c.view_data.append((route_info.name, view_fqn, routepath, active))
+
+        c.whitelist_views = whitelist_views
+        return self._get_template_context(c)

rhodecode/public/js/rhodecode/routes.js

@@ -1,213 +1,214 b''
 
 /******************************************************************************
  *                                                                            *
  *                      DO NOT CHANGE THIS FILE MANUALLY                      *
  *                                                                            *
  *                                                                            *
  *        This file is automatically generated when the app starts up with    *
  *                         generate_js_files = true                           *
  *                                                                            *
  *  To add a route here pass jsroute=True to the route definition in the app  *
  *                                                                            *
  ******************************************************************************/
 function registerRCRoutes() {
     // routes registration
     pyroutes.register('new_repo', '/_admin/create_repository', []);
     pyroutes.register('edit_user', '/_admin/users/%(user_id)s/edit', ['user_id']);
     pyroutes.register('edit_user_group_members', '/_admin/user_groups/%(user_group_id)s/edit/members', ['user_group_id']);
     pyroutes.register('changeset_home', '/%(repo_name)s/changeset/%(revision)s', ['repo_name', 'revision']);
     pyroutes.register('changeset_comment', '/%(repo_name)s/changeset/%(revision)s/comment', ['repo_name', 'revision']);
     pyroutes.register('changeset_comment_preview', '/%(repo_name)s/changeset/comment/preview', ['repo_name']);
     pyroutes.register('changeset_comment_delete', '/%(repo_name)s/changeset/comment/%(comment_id)s/delete', ['repo_name', 'comment_id']);
     pyroutes.register('changeset_info', '/%(repo_name)s/changeset_info/%(revision)s', ['repo_name', 'revision']);
     pyroutes.register('compare_url', '/%(repo_name)s/compare/%(source_ref_type)s@%(source_ref)s...%(target_ref_type)s@%(target_ref)s', ['repo_name', 'source_ref_type', 'source_ref', 'target_ref_type', 'target_ref']);
     pyroutes.register('pullrequest_home', '/%(repo_name)s/pull-request/new', ['repo_name']);
     pyroutes.register('pullrequest', '/%(repo_name)s/pull-request/new', ['repo_name']);
     pyroutes.register('pullrequest_repo_refs', '/%(repo_name)s/pull-request/refs/%(target_repo_name)s', ['repo_name', 'target_repo_name']);
     pyroutes.register('pullrequest_repo_destinations', '/%(repo_name)s/pull-request/repo-destinations', ['repo_name']);
     pyroutes.register('pullrequest_show', '/%(repo_name)s/pull-request/%(pull_request_id)s', ['repo_name', 'pull_request_id']);
     pyroutes.register('pullrequest_update', '/%(repo_name)s/pull-request/%(pull_request_id)s', ['repo_name', 'pull_request_id']);
     pyroutes.register('pullrequest_comment', '/%(repo_name)s/pull-request-comment/%(pull_request_id)s', ['repo_name', 'pull_request_id']);
     pyroutes.register('pullrequest_comment_delete', '/%(repo_name)s/pull-request-comment/%(comment_id)s/delete', ['repo_name', 'comment_id']);
     pyroutes.register('favicon', '/favicon.ico', []);
     pyroutes.register('robots', '/robots.txt', []);
     pyroutes.register('auth_home', '/_admin/auth*traverse', []);
     pyroutes.register('global_integrations_new', '/_admin/integrations/new', []);
     pyroutes.register('global_integrations_home', '/_admin/integrations', []);
     pyroutes.register('global_integrations_list', '/_admin/integrations/%(integration)s', ['integration']);
     pyroutes.register('global_integrations_create', '/_admin/integrations/%(integration)s/new', ['integration']);
     pyroutes.register('global_integrations_edit', '/_admin/integrations/%(integration)s/%(integration_id)s', ['integration', 'integration_id']);
     pyroutes.register('repo_group_integrations_home', '/%(repo_group_name)s/settings/integrations', ['repo_group_name']);
     pyroutes.register('repo_group_integrations_list', '/%(repo_group_name)s/settings/integrations/%(integration)s', ['repo_group_name', 'integration']);
     pyroutes.register('repo_group_integrations_new', '/%(repo_group_name)s/settings/integrations/new', ['repo_group_name']);
     pyroutes.register('repo_group_integrations_create', '/%(repo_group_name)s/settings/integrations/%(integration)s/new', ['repo_group_name', 'integration']);
     pyroutes.register('repo_group_integrations_edit', '/%(repo_group_name)s/settings/integrations/%(integration)s/%(integration_id)s', ['repo_group_name', 'integration', 'integration_id']);
     pyroutes.register('repo_integrations_home', '/%(repo_name)s/settings/integrations', ['repo_name']);
     pyroutes.register('repo_integrations_list', '/%(repo_name)s/settings/integrations/%(integration)s', ['repo_name', 'integration']);
     pyroutes.register('repo_integrations_new', '/%(repo_name)s/settings/integrations/new', ['repo_name']);
     pyroutes.register('repo_integrations_create', '/%(repo_name)s/settings/integrations/%(integration)s/new', ['repo_name', 'integration']);
     pyroutes.register('repo_integrations_edit', '/%(repo_name)s/settings/integrations/%(integration)s/%(integration_id)s', ['repo_name', 'integration', 'integration_id']);
     pyroutes.register('ops_ping', '/_admin/ops/ping', []);
     pyroutes.register('ops_error_test', '/_admin/ops/error', []);
     pyroutes.register('ops_redirect_test', '/_admin/ops/redirect', []);
     pyroutes.register('admin_home', '/_admin', []);
     pyroutes.register('admin_audit_logs', '/_admin/audit_logs', []);
     pyroutes.register('pull_requests_global_0', '/_admin/pull_requests/%(pull_request_id)s', ['pull_request_id']);
     pyroutes.register('pull_requests_global_1', '/_admin/pull-requests/%(pull_request_id)s', ['pull_request_id']);
     pyroutes.register('pull_requests_global', '/_admin/pull-request/%(pull_request_id)s', ['pull_request_id']);
     pyroutes.register('admin_settings_open_source', '/_admin/settings/open_source', []);
     pyroutes.register('admin_settings_vcs_svn_generate_cfg', '/_admin/settings/vcs/svn_generate_cfg', []);
     pyroutes.register('admin_settings_system', '/_admin/settings/system', []);
     pyroutes.register('admin_settings_system_update', '/_admin/settings/system/updates', []);
     pyroutes.register('admin_settings_sessions', '/_admin/settings/sessions', []);
     pyroutes.register('admin_settings_sessions_cleanup', '/_admin/settings/sessions/cleanup', []);
     pyroutes.register('admin_settings_process_management', '/_admin/settings/process_management', []);
     pyroutes.register('admin_settings_process_management_signal', '/_admin/settings/process_management/signal', []);
     pyroutes.register('admin_permissions_application', '/_admin/permissions/application', []);
     pyroutes.register('admin_permissions_application_update', '/_admin/permissions/application/update', []);
     pyroutes.register('admin_permissions_global', '/_admin/permissions/global', []);
     pyroutes.register('admin_permissions_global_update', '/_admin/permissions/global/update', []);
     pyroutes.register('admin_permissions_object', '/_admin/permissions/object', []);
     pyroutes.register('admin_permissions_object_update', '/_admin/permissions/object/update', []);
     pyroutes.register('admin_permissions_ips', '/_admin/permissions/ips', []);
     pyroutes.register('admin_permissions_overview', '/_admin/permissions/overview', []);
+    pyroutes.register('admin_permissions_auth_token_access', '/_admin/permissions/auth_token_access', []);
     pyroutes.register('users', '/_admin/users', []);
     pyroutes.register('users_data', '/_admin/users_data', []);
     pyroutes.register('edit_user_auth_tokens', '/_admin/users/%(user_id)s/edit/auth_tokens', ['user_id']);
     pyroutes.register('edit_user_auth_tokens_add', '/_admin/users/%(user_id)s/edit/auth_tokens/new', ['user_id']);
     pyroutes.register('edit_user_auth_tokens_delete', '/_admin/users/%(user_id)s/edit/auth_tokens/delete', ['user_id']);
     pyroutes.register('edit_user_emails', '/_admin/users/%(user_id)s/edit/emails', ['user_id']);
     pyroutes.register('edit_user_emails_add', '/_admin/users/%(user_id)s/edit/emails/new', ['user_id']);
     pyroutes.register('edit_user_emails_delete', '/_admin/users/%(user_id)s/edit/emails/delete', ['user_id']);
     pyroutes.register('edit_user_ips', '/_admin/users/%(user_id)s/edit/ips', ['user_id']);
     pyroutes.register('edit_user_ips_add', '/_admin/users/%(user_id)s/edit/ips/new', ['user_id']);
     pyroutes.register('edit_user_ips_delete', '/_admin/users/%(user_id)s/edit/ips/delete', ['user_id']);
     pyroutes.register('edit_user_groups_management', '/_admin/users/%(user_id)s/edit/groups_management', ['user_id']);
     pyroutes.register('edit_user_groups_management_updates', '/_admin/users/%(user_id)s/edit/edit_user_groups_management/updates', ['user_id']);
     pyroutes.register('edit_user_audit_logs', '/_admin/users/%(user_id)s/edit/audit', ['user_id']);
     pyroutes.register('channelstream_connect', '/_admin/channelstream/connect', []);
     pyroutes.register('channelstream_subscribe', '/_admin/channelstream/subscribe', []);
     pyroutes.register('channelstream_proxy', '/_channelstream', []);
     pyroutes.register('login', '/_admin/login', []);
     pyroutes.register('logout', '/_admin/logout', []);
     pyroutes.register('register', '/_admin/register', []);
     pyroutes.register('reset_password', '/_admin/password_reset', []);
     pyroutes.register('reset_password_confirmation', '/_admin/password_reset_confirmation', []);
     pyroutes.register('home', '/', []);
     pyroutes.register('user_autocomplete_data', '/_users', []);
     pyroutes.register('user_group_autocomplete_data', '/_user_groups', []);
     pyroutes.register('repo_list_data', '/_repos', []);
     pyroutes.register('goto_switcher_data', '/_goto_data', []);
     pyroutes.register('journal', '/_admin/journal', []);
     pyroutes.register('journal_rss', '/_admin/journal/rss', []);
     pyroutes.register('journal_atom', '/_admin/journal/atom', []);
     pyroutes.register('journal_public', '/_admin/public_journal', []);
     pyroutes.register('journal_public_atom', '/_admin/public_journal/atom', []);
     pyroutes.register('journal_public_atom_old', '/_admin/public_journal_atom', []);
     pyroutes.register('journal_public_rss', '/_admin/public_journal/rss', []);
     pyroutes.register('journal_public_rss_old', '/_admin/public_journal_rss', []);
     pyroutes.register('toggle_following', '/_admin/toggle_following', []);
     pyroutes.register('repo_summary_explicit', '/%(repo_name)s/summary', ['repo_name']);
     pyroutes.register('repo_summary_commits', '/%(repo_name)s/summary-commits', ['repo_name']);
     pyroutes.register('repo_commit', '/%(repo_name)s/changeset/%(commit_id)s', ['repo_name', 'commit_id']);
     pyroutes.register('repo_archivefile', '/%(repo_name)s/archive/%(fname)s', ['repo_name', 'fname']);
     pyroutes.register('repo_files_diff', '/%(repo_name)s/diff/%(f_path)s', ['repo_name', 'f_path']);
     pyroutes.register('repo_files_diff_2way_redirect', '/%(repo_name)s/diff-2way/%(f_path)s', ['repo_name', 'f_path']);
     pyroutes.register('repo_files', '/%(repo_name)s/files/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_files:default_path', '/%(repo_name)s/files/%(commit_id)s/', ['repo_name', 'commit_id']);
     pyroutes.register('repo_files:default_commit', '/%(repo_name)s/files', ['repo_name']);
     pyroutes.register('repo_files:rendered', '/%(repo_name)s/render/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_files:annotated', '/%(repo_name)s/annotate/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_files:annotated_previous', '/%(repo_name)s/annotate-previous/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_nodetree_full', '/%(repo_name)s/nodetree_full/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_nodetree_full:default_path', '/%(repo_name)s/nodetree_full/%(commit_id)s/', ['repo_name', 'commit_id']);
     pyroutes.register('repo_files_nodelist', '/%(repo_name)s/nodelist/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_file_raw', '/%(repo_name)s/raw/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_file_download', '/%(repo_name)s/download/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_file_download:legacy', '/%(repo_name)s/rawfile/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_file_history', '/%(repo_name)s/history/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_file_authors', '/%(repo_name)s/authors/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_files_remove_file', '/%(repo_name)s/remove_file/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_files_delete_file', '/%(repo_name)s/delete_file/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_files_edit_file', '/%(repo_name)s/edit_file/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_files_update_file', '/%(repo_name)s/update_file/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_files_add_file', '/%(repo_name)s/add_file/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_files_create_file', '/%(repo_name)s/create_file/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_refs_data', '/%(repo_name)s/refs-data', ['repo_name']);
     pyroutes.register('repo_refs_changelog_data', '/%(repo_name)s/refs-data-changelog', ['repo_name']);
     pyroutes.register('repo_stats', '/%(repo_name)s/repo_stats/%(commit_id)s', ['repo_name', 'commit_id']);
     pyroutes.register('repo_changelog', '/%(repo_name)s/changelog', ['repo_name']);
     pyroutes.register('repo_changelog_file', '/%(repo_name)s/changelog/%(commit_id)s/%(f_path)s', ['repo_name', 'commit_id', 'f_path']);
     pyroutes.register('repo_changelog_elements', '/%(repo_name)s/changelog_elements', ['repo_name']);
     pyroutes.register('tags_home', '/%(repo_name)s/tags', ['repo_name']);
     pyroutes.register('branches_home', '/%(repo_name)s/branches', ['repo_name']);
     pyroutes.register('bookmarks_home', '/%(repo_name)s/bookmarks', ['repo_name']);
     pyroutes.register('pullrequest_show', '/%(repo_name)s/pull-request/%(pull_request_id)s', ['repo_name', 'pull_request_id']);
     pyroutes.register('pullrequest_show_all', '/%(repo_name)s/pull-request', ['repo_name']);
     pyroutes.register('pullrequest_show_all_data', '/%(repo_name)s/pull-request-data', ['repo_name']);
     pyroutes.register('changeset_home', '/%(repo_name)s/changeset/%(revision)s', ['repo_name', 'revision']);
     pyroutes.register('changeset_children', '/%(repo_name)s/changeset_children/%(revision)s', ['repo_name', 'revision']);
     pyroutes.register('changeset_parents', '/%(repo_name)s/changeset_parents/%(revision)s', ['repo_name', 'revision']);
     pyroutes.register('edit_repo', '/%(repo_name)s/settings', ['repo_name']);
     pyroutes.register('edit_repo_advanced', '/%(repo_name)s/settings/advanced', ['repo_name']);
     pyroutes.register('edit_repo_advanced_delete', '/%(repo_name)s/settings/advanced/delete', ['repo_name']);
     pyroutes.register('edit_repo_advanced_locking', '/%(repo_name)s/settings/advanced/locking', ['repo_name']);
     pyroutes.register('edit_repo_advanced_journal', '/%(repo_name)s/settings/advanced/journal', ['repo_name']);
     pyroutes.register('edit_repo_advanced_fork', '/%(repo_name)s/settings/advanced/fork', ['repo_name']);
     pyroutes.register('edit_repo_caches', '/%(repo_name)s/settings/caches', ['repo_name']);
     pyroutes.register('edit_repo_perms', '/%(repo_name)s/settings/permissions', ['repo_name']);
     pyroutes.register('repo_reviewers', '/%(repo_name)s/settings/review/rules', ['repo_name']);
     pyroutes.register('repo_default_reviewers_data', '/%(repo_name)s/settings/review/default-reviewers', ['repo_name']);
     pyroutes.register('repo_maintenance', '/%(repo_name)s/settings/maintenance', ['repo_name']);
     pyroutes.register('repo_maintenance_execute', '/%(repo_name)s/settings/maintenance/execute', ['repo_name']);
     pyroutes.register('strip', '/%(repo_name)s/settings/strip', ['repo_name']);
     pyroutes.register('strip_check', '/%(repo_name)s/settings/strip_check', ['repo_name']);
     pyroutes.register('strip_execute', '/%(repo_name)s/settings/strip_execute', ['repo_name']);
     pyroutes.register('rss_feed_home', '/%(repo_name)s/feed/rss', ['repo_name']);
     pyroutes.register('atom_feed_home', '/%(repo_name)s/feed/atom', ['repo_name']);
     pyroutes.register('repo_summary', '/%(repo_name)s', ['repo_name']);
     pyroutes.register('repo_summary_slash', '/%(repo_name)s/', ['repo_name']);
     pyroutes.register('repo_group_home', '/%(repo_group_name)s', ['repo_group_name']);
     pyroutes.register('repo_group_home_slash', '/%(repo_group_name)s/', ['repo_group_name']);
     pyroutes.register('search', '/_admin/search', []);
     pyroutes.register('search_repo', '/%(repo_name)s/search', ['repo_name']);
     pyroutes.register('user_profile', '/_profiles/%(username)s', ['username']);
     pyroutes.register('my_account_profile', '/_admin/my_account/profile', []);
     pyroutes.register('my_account_edit', '/_admin/my_account/edit', []);
     pyroutes.register('my_account_update', '/_admin/my_account/update', []);
     pyroutes.register('my_account_password', '/_admin/my_account/password', []);
-    pyroutes.register('my_account_password_update', '/_admin/my_account/password', []);
+    pyroutes.register('my_account_password_update', '/_admin/my_account/password/update', []);
     pyroutes.register('my_account_auth_tokens', '/_admin/my_account/auth_tokens', []);
     pyroutes.register('my_account_auth_tokens_add', '/_admin/my_account/auth_tokens/new', []);
     pyroutes.register('my_account_auth_tokens_delete', '/_admin/my_account/auth_tokens/delete', []);
     pyroutes.register('my_account_emails', '/_admin/my_account/emails', []);
     pyroutes.register('my_account_emails_add', '/_admin/my_account/emails/new', []);
     pyroutes.register('my_account_emails_delete', '/_admin/my_account/emails/delete', []);
     pyroutes.register('my_account_repos', '/_admin/my_account/repos', []);
     pyroutes.register('my_account_watched', '/_admin/my_account/watched', []);
     pyroutes.register('my_account_perms', '/_admin/my_account/perms', []);
     pyroutes.register('my_account_notifications', '/_admin/my_account/notifications', []);
     pyroutes.register('my_account_notifications_toggle_visibility', '/_admin/my_account/toggle_visibility', []);
     pyroutes.register('my_account_pullrequests', '/_admin/my_account/pull_requests', []);
     pyroutes.register('my_account_pullrequests_data', '/_admin/my_account/pull_requests/data', []);
     pyroutes.register('notifications_show_all', '/_admin/notifications', []);
     pyroutes.register('notifications_mark_all_read', '/_admin/notifications/mark_all_read', []);
     pyroutes.register('notifications_show', '/_admin/notifications/%(notification_id)s', ['notification_id']);
     pyroutes.register('notifications_update', '/_admin/notifications/%(notification_id)s/update', ['notification_id']);
     pyroutes.register('notifications_delete', '/_admin/notifications/%(notification_id)s/delete', ['notification_id']);
     pyroutes.register('my_account_notifications_test_channelstream', '/_admin/my_account/test_channelstream', []);
     pyroutes.register('gists_show', '/_admin/gists', []);
     pyroutes.register('gists_new', '/_admin/gists/new', []);
     pyroutes.register('gists_create', '/_admin/gists/create', []);
     pyroutes.register('gist_show', '/_admin/gists/%(gist_id)s', ['gist_id']);
     pyroutes.register('gist_delete', '/_admin/gists/%(gist_id)s/delete', ['gist_id']);
     pyroutes.register('gist_edit', '/_admin/gists/%(gist_id)s/edit', ['gist_id']);
     pyroutes.register('gist_edit_check_revision', '/_admin/gists/%(gist_id)s/edit/check_revision', ['gist_id']);
     pyroutes.register('gist_update', '/_admin/gists/%(gist_id)s/update', ['gist_id']);
     pyroutes.register('gist_show_rev', '/_admin/gists/%(gist_id)s/%(revision)s', ['gist_id', 'revision']);
     pyroutes.register('gist_show_formatted', '/_admin/gists/%(gist_id)s/%(revision)s/%(format)s', ['gist_id', 'revision', 'format']);
     pyroutes.register('gist_show_formatted_path', '/_admin/gists/%(gist_id)s/%(revision)s/%(format)s/%(f_path)s', ['gist_id', 'revision', 'format', 'f_path']);
     pyroutes.register('debug_style_home', '/_admin/debug_style', []);
     pyroutes.register('debug_style_template', '/_admin/debug_style/t/%(t_path)s', ['t_path']);
     pyroutes.register('apiv2', '/_admin/api', []);
 }

rhodecode/templates/admin/permissions/permissions.mako

@@ -1,56 +1,59 b''
 ## -*- coding: utf-8 -*-
 <%inherit file="/base/base.mako"/>
 
 <%def name="title()">
     ${_('Permissions Administration')}
     %if c.rhodecode_name:
         &middot; ${h.branding(c.rhodecode_name)}
     %endif
 </%def>
 
 <%def name="breadcrumbs_links()">
     ${h.link_to(_('Admin'),h.route_path('admin_home'))}
     &raquo;
     ${_('Permissions')}
 </%def>
 
 <%def name="menu_bar_nav()">
     ${self.menu_items(active='admin')}
 </%def>
 
 
 <%def name="main()">
 <div class="box">
   <div class="title">
       ${self.breadcrumbs()}
   </div>
 
   <div class="sidebar-col-wrapper scw-small">
     ##main
     <div class="sidebar">
         <ul class="nav nav-pills nav-stacked">
           <li class="${'active' if c.active=='application' else ''}">
             <a href="${h.route_path('admin_permissions_application')}">${_('Application')}</a>
           </li>
           <li class="${'active' if c.active=='global' else ''}">
             <a href="${h.route_path('admin_permissions_global')}">${_('Global')}</a>
           </li>
           <li class="${'active' if c.active=='objects' else ''}">
             <a href="${h.route_path('admin_permissions_object')}">${_('Object')}</a>
           </li>
           <li class="${'active' if c.active=='ips' else ''}">
             <a href="${h.route_path('admin_permissions_ips')}">${_('IP Whitelist')}</a>
           </li>
+          <li class="${'active' if c.active=='auth_token_access' else ''}">
+            <a href="${h.route_path('admin_permissions_auth_token_access')}">${_('AuthToken Access')}</a>
+          </li>
           <li class="${'active' if c.active=='perms' else ''}">
             <a href="${h.route_path('admin_permissions_overview')}">${_('Overview')}</a>
           </li>
         </ul>
     </div>
 
     <div class="main-content-full-width">
         <%include file="/admin/permissions/permissions_${c.active}.mako"/>
     </div>
   </div>
 </div>
 
 </%def>