configs: added config for top-level bucket

configs/development.ini

@@ -1,845 +1,850 b''
 
 ; #########################################
 ; RHODECODE COMMUNITY EDITION CONFIGURATION
 ; #########################################
 
 [DEFAULT]
 ; Debug flag sets all loggers to debug, and enables request tracking
 debug = true
 
 ; ########################################################################
 ; EMAIL CONFIGURATION
 ; These settings will be used by the RhodeCode mailing system
 ; ########################################################################
 
 ; prefix all emails subjects with given prefix, helps filtering out emails
 #email_prefix = [RhodeCode]
 
 ; email FROM address all mails will be sent
 #app_email_from = rhodecode-noreply@localhost
 
 #smtp_server = mail.server.com
 #smtp_username =
 #smtp_password =
 #smtp_port =
 #smtp_use_tls = false
 #smtp_use_ssl = true
 
 [server:main]
 ; COMMON HOST/IP CONFIG, This applies mostly to develop setup,
 ; Host port for gunicorn are controlled by gunicorn_conf.py
 host = 127.0.0.1
 port = 10020
 
 
 ; ###########################
 ; GUNICORN APPLICATION SERVER
 ; ###########################
 
 ; run with gunicorn --paste rhodecode.ini --config gunicorn_conf.py
 
 ; Module to use, this setting shouldn't be changed
 use = egg:gunicorn#main
 
 ; Prefix middleware for RhodeCode.
 ; recommended when using proxy setup.
 ; allows to set RhodeCode under a prefix in server.
 ; eg https://server.com/custom_prefix. Enable `filter-with =` option below as well.
 ; And set your prefix like: `prefix = /custom_prefix`
 ; be sure to also set beaker.session.cookie_path = /custom_prefix if you need
 ; to make your cookies only work on prefix url
 [filter:proxy-prefix]
 use = egg:PasteDeploy#prefix
 prefix = /
 
 [app:main]
 ; The %(here)s variable will be replaced with the absolute path of parent directory
 ; of this file
 ; Each option in the app:main can be override by an environmental variable
 ;
 ;To override an option:
 ;
 ;RC_<KeyName>
 ;Everything should be uppercase, . and - should be replaced by _.
 ;For example, if you have these configuration settings:
 ;rc_cache.repo_object.backend = foo
 ;can be overridden by
 ;export RC_CACHE_REPO_OBJECT_BACKEND=foo
 
 use = egg:rhodecode-enterprise-ce
 
 ; enable proxy prefix middleware, defined above
 #filter-with = proxy-prefix
 
 ; #############
 ; DEBUG OPTIONS
 ; #############
 
 pyramid.reload_templates = true
 
 # During development the we want to have the debug toolbar enabled
 pyramid.includes =
     pyramid_debugtoolbar
 
 debugtoolbar.hosts = 0.0.0.0/0
 debugtoolbar.exclude_prefixes =
     /css
     /fonts
     /images
     /js
 
 ## RHODECODE PLUGINS ##
 rhodecode.includes =
     rhodecode.api
 
 
 # api prefix url
 rhodecode.api.url = /_admin/api
 
 ; enable debug style page
 debug_style = true
 
 ; #################
 ; END DEBUG OPTIONS
 ; #################
 
 ; encryption key used to encrypt social plugin tokens,
 ; remote_urls with credentials etc, if not set it defaults to
 ; `beaker.session.secret`
 #rhodecode.encrypted_values.secret =
 
 ; decryption strict mode (enabled by default). It controls if decryption raises
 ; `SignatureVerificationError` in case of wrong key, or damaged encryption data.
 #rhodecode.encrypted_values.strict = false
 
 ; Pick algorithm for encryption. Either fernet (more secure) or aes (default)
 ; fernet is safer, and we strongly recommend switching to it.
 ; Due to backward compatibility aes is used as default.
 #rhodecode.encrypted_values.algorithm = fernet
 
 ; Return gzipped responses from RhodeCode (static files/application)
 gzip_responses = false
 
 ; Auto-generate javascript routes file on startup
 generate_js_files = false
 
 ; System global default language.
 ; All available languages: en (default), be, de, es, fr, it, ja, pl, pt, ru, zh
 lang = en
 
 ; Perform a full repository scan and import on each server start.
 ; Settings this to true could lead to very long startup time.
 startup.import_repos = false
 
 ; URL at which the application is running. This is used for Bootstrapping
 ; requests in context when no web request is available. Used in ishell, or
 ; SSH calls. Set this for events to receive proper url for SSH calls.
 app.base_url = http://rhodecode.local
 
 ; Host at which the Service API is running.
 app.service_api.host = http://rhodecode.local:10020
 
 ; Secret for Service API authentication.
 app.service_api.token =
 
 ; Unique application ID. Should be a random unique string for security.
 app_instance_uuid = rc-production
 
 ; Cut off limit for large diffs (size in bytes). If overall diff size on
 ; commit, or pull request exceeds this limit this diff will be displayed
 ; partially. E.g 512000 == 512Kb
 cut_off_limit_diff = 512000
 
 ; Cut off limit for large files inside diffs (size in bytes). Each individual
 ; file inside diff which exceeds this limit will be displayed partially.
 ;  E.g 128000 == 128Kb
 cut_off_limit_file = 128000
 
 ; Use cached version of vcs repositories everywhere. Recommended to be `true`
 vcs_full_cache = true
 
 ; Force https in RhodeCode, fixes https redirects, assumes it's always https.
 ; Normally this is controlled by proper flags sent from http server such as Nginx or Apache
 force_https = false
 
 ; use Strict-Transport-Security headers
 use_htsts = false
 
 ; Set to true if your repos are exposed using the dumb protocol
 git_update_server_info = false
 
 ; RSS/ATOM feed options
 rss_cut_off_limit = 256000
 rss_items_per_page = 10
 rss_include_diff = false
 
 ; gist URL alias, used to create nicer urls for gist. This should be an
 ; url that does rewrites to _admin/gists/{gistid}.
 ; example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
 ; RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/{gistid}
 gist_alias_url =
 
 ; List of views (using glob pattern syntax) that AUTH TOKENS could be
 ; used for access.
 ; Adding ?auth_token=TOKEN_HASH to the url authenticates this request as if it
 ; came from the the logged in user who own this authentication token.
 ; Additionally @TOKEN syntax can be used to bound the view to specific
 ; authentication token. Such view would be only accessible when used together
 ; with this authentication token
 ; list of all views can be found under `/_admin/permissions/auth_token_access`
 ; The list should be "," separated and on a single line.
 ; Most common views to enable:
 
 #    RepoCommitsView:repo_commit_download
 #    RepoCommitsView:repo_commit_patch
 #    RepoCommitsView:repo_commit_raw
 #    RepoCommitsView:repo_commit_raw@TOKEN
 #    RepoFilesView:repo_files_diff
 #    RepoFilesView:repo_archivefile
 #    RepoFilesView:repo_file_raw
 #    GistView:*
 api_access_controllers_whitelist =
 
 ; Default encoding used to convert from and to unicode
 ; can be also a comma separated list of encoding in case of mixed encodings
 default_encoding = UTF-8
 
 ; instance-id prefix
 ; a prefix key for this instance used for cache invalidation when running
 ; multiple instances of RhodeCode, make sure it's globally unique for
 ; all running RhodeCode instances. Leave empty if you don't use it
 instance_id =
 
 ; Fallback authentication plugin. Set this to a plugin ID to force the usage
 ; of an authentication plugin also if it is disabled by it's settings.
 ; This could be useful if you are unable to log in to the system due to broken
 ; authentication settings. Then you can enable e.g. the internal RhodeCode auth
 ; module to log in again and fix the settings.
 ; Available builtin plugin IDs (hash is part of the ID):
 ; egg:rhodecode-enterprise-ce#rhodecode
 ; egg:rhodecode-enterprise-ce#pam
 ; egg:rhodecode-enterprise-ce#ldap
 ; egg:rhodecode-enterprise-ce#jasig_cas
 ; egg:rhodecode-enterprise-ce#headers
 ; egg:rhodecode-enterprise-ce#crowd
 
 #rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode
 
 ; Flag to control loading of legacy plugins in py:/path format
 auth_plugin.import_legacy_plugins = true
 
 ; alternative return HTTP header for failed authentication. Default HTTP
 ; response is 401 HTTPUnauthorized. Currently HG clients have troubles with
 ; handling that causing a series of failed authentication calls.
 ; Set this variable to 403 to return HTTPForbidden, or any other HTTP code
 ; This will be served instead of default 401 on bad authentication
 auth_ret_code =
 
 ; use special detection method when serving auth_ret_code, instead of serving
 ; ret_code directly, use 401 initially (Which triggers credentials prompt)
 ; and then serve auth_ret_code to clients
 auth_ret_code_detection = false
 
 ; locking return code. When repository is locked return this HTTP code. 2XX
 ; codes don't break the transactions while 4XX codes do
 lock_ret_code = 423
 
 ; Filesystem location were repositories should be stored
 repo_store.path = /var/opt/rhodecode_repo_store
 
 ; allows to setup custom hooks in settings page
 allow_custom_hooks_settings = true
 
 ; Generated license token required for EE edition license.
 ; New generated token value can be found in Admin > settings > license page.
 license_token =
 
 ; This flag hides sensitive information on the license page such as token, and license data
 license.hide_license_info = false
 
 ; supervisor connection uri, for managing supervisor and logs.
 supervisor.uri =
 
 ; supervisord group name/id we only want this RC instance to handle
 supervisor.group_id = dev
 
 ; Display extended labs settings
 labs_settings_active = true
 
 ; Custom exception store path, defaults to TMPDIR
 ; This is used to store exception from RhodeCode in shared directory
 #exception_tracker.store_path =
 
 ; Send email with exception details when it happens
 #exception_tracker.send_email = false
 
 ; Comma separated list of recipients for exception emails,
 ; e.g [e-mail],[e-mail]
 ; Can be left empty, then emails will be sent to ALL super-admins
 #exception_tracker.send_email_recipients =
 
 ; optional prefix to Add to email Subject
 #exception_tracker.email_prefix = [RHODECODE ERROR]
 
 ; File store configuration. This is used to store and serve uploaded files
 file_store.enabled = true
 
 ; Storage backend, available options are: local
 file_store.backend = local
 
 ; path to store the uploaded binaries and artifacts
 file_store.storage_path = /var/opt/rhodecode_data/file_store
 
 
 ; Redis url to acquire/check generation of archives locks
 archive_cache.locking.url = redis://redis:6379/1
 
 ; Storage backend, only 'filesystem' and 'objectstore' are available now
 archive_cache.backend.type = filesystem
 
 ; url for s3 compatible storage that allows to upload artifacts
 ; e.g http://minio:9000
 archive_cache.objectstore.url = http://s3-minio:9000
 
 ; key for s3 auth
 archive_cache.objectstore.key = key
 
 ; secret for s3 auth
 archive_cache.objectstore.secret = secret
 
 ; number of sharded buckets to create to distribute archives across
 ; default is 8 shards
 archive_cache.objectstore.bucket_shards = 8
 
+; a top-level bucket to put all other sharded buckets in
+; in case it's empty all buckets will be created in top-level (not recommended)
+; objects will be stored in rhodecode-archive-cache/shard-bucket-N based on the bucket_shards number
+archive_cache.objectstore.bucket_root = rhodecode-archive-cache
+
 ; if true, this cache will try to retry with retry_attempts=N times waiting retry_backoff time
 archive_cache.objectstore.retry = false
 
 ; number of seconds to wait for next try using retry
 archive_cache.objectstore.retry_backoff = 1
 
 ; how many tries do do a retry fetch from this backend
 archive_cache.objectstore.retry_attempts = 10
 
 ; Default is $cache_dir/archive_cache if not set
 ; Generated repo archives will be cached at this location
 ; and served from the cache during subsequent requests for the same archive of
 ; the repository. This path is important to be shared across filesystems and with
 ; RhodeCode and vcsserver
 archive_cache.filesystem.store_dir = /var/opt/rhodecode_data/archive_cache
 
 ; The limit in GB sets how much data we cache before recycling last used, defaults to 10 gb
 archive_cache.filesystem.cache_size_gb = 1
 
 ; Eviction policy used to clear out after cache_size_gb limit is reached
 archive_cache.filesystem.eviction_policy = least-recently-stored
 
 ; By default cache uses sharding technique, this specifies how many shards are there
 ; default is 8 shards
 archive_cache.filesystem.cache_shards = 8
 
 ; if true, this cache will try to retry with retry_attempts=N times waiting retry_backoff time
 archive_cache.filesystem.retry = false
 
 ; number of seconds to wait for next try using retry
 archive_cache.filesystem.retry_backoff = 1
 
 ; how many tries do do a retry fetch from this backend
 archive_cache.filesystem.retry_attempts = 10
 
 
 ; #############
 ; CELERY CONFIG
 ; #############
 
 ; manually run celery: /path/to/celery worker --task-events --beat --app rhodecode.lib.celerylib.loader --scheduler rhodecode.lib.celerylib.scheduler.RcScheduler --loglevel DEBUG --ini /path/to/rhodecode.ini
 
 use_celery = true
 
 ; path to store schedule database
 #celerybeat-schedule.path =
 
 ; connection url to the message broker (default redis)
 celery.broker_url = redis://redis:6379/8
 
 ; results backend to get results for (default redis)
 celery.result_backend = redis://redis:6379/8
 
 ; rabbitmq example
 #celery.broker_url = amqp://rabbitmq:qweqwe@localhost:5672/rabbitmqhost
 
 ; maximum tasks to execute before worker restart
 celery.max_tasks_per_child = 20
 
 ; tasks will never be sent to the queue, but executed locally instead.
 celery.task_always_eager = false
 
 ; #############
 ; DOGPILE CACHE
 ; #############
 
 ; Default cache dir for caches. Putting this into a ramdisk can boost performance.
 ; eg. /tmpfs/data_ramdisk, however this directory might require large amount of space
 cache_dir = /var/opt/rhodecode_data
 
 ; *********************************************
 ; `sql_cache_short` cache for heavy SQL queries
 ; Only supported backend is `memory_lru`
 ; *********************************************
 rc_cache.sql_cache_short.backend = dogpile.cache.rc.memory_lru
 rc_cache.sql_cache_short.expiration_time = 30
 
 
 ; *****************************************************
 ; `cache_repo_longterm` cache for repo object instances
 ; Only supported backend is `memory_lru`
 ; *****************************************************
 rc_cache.cache_repo_longterm.backend = dogpile.cache.rc.memory_lru
 ; by default we use 30 Days, cache is still invalidated on push
 rc_cache.cache_repo_longterm.expiration_time = 2592000
 ; max items in LRU cache, set to smaller number to save memory, and expire last used caches
 rc_cache.cache_repo_longterm.max_size = 10000
 
 
 ; *********************************************
 ; `cache_general` cache for general purpose use
 ; for simplicity use rc.file_namespace backend,
 ; for performance and scale use rc.redis
 ; *********************************************
 rc_cache.cache_general.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_general.expiration_time = 43200
 ; file cache store path. Defaults to `cache_dir =` value or tempdir if both values are not set
 #rc_cache.cache_general.arguments.filename = /tmp/cache_general_db
 
 ; alternative `cache_general` redis backend with distributed lock
 #rc_cache.cache_general.backend = dogpile.cache.rc.redis
 #rc_cache.cache_general.expiration_time = 300
 
 ; redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_general.arguments.redis_expiration_time = 7200
 
 #rc_cache.cache_general.arguments.host = localhost
 #rc_cache.cache_general.arguments.port = 6379
 #rc_cache.cache_general.arguments.db = 0
 #rc_cache.cache_general.arguments.socket_timeout = 30
 ; more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_general.arguments.distributed_lock = true
 
 ; auto-renew lock to prevent stale locks, slower but safer. Use only if problems happen
 #rc_cache.cache_general.arguments.lock_auto_renewal = true
 
 ; *************************************************
 ; `cache_perms` cache for permission tree, auth TTL
 ; for simplicity use rc.file_namespace backend,
 ; for performance and scale use rc.redis
 ; *************************************************
 rc_cache.cache_perms.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_perms.expiration_time = 3600
 ; file cache store path. Defaults to `cache_dir =` value or tempdir if both values are not set
 #rc_cache.cache_perms.arguments.filename = /tmp/cache_perms_db
 
 ; alternative `cache_perms` redis backend with distributed lock
 #rc_cache.cache_perms.backend = dogpile.cache.rc.redis
 #rc_cache.cache_perms.expiration_time = 300
 
 ; redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_perms.arguments.redis_expiration_time = 7200
 
 #rc_cache.cache_perms.arguments.host = localhost
 #rc_cache.cache_perms.arguments.port = 6379
 #rc_cache.cache_perms.arguments.db = 0
 #rc_cache.cache_perms.arguments.socket_timeout = 30
 ; more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_perms.arguments.distributed_lock = true
 
 ; auto-renew lock to prevent stale locks, slower but safer. Use only if problems happen
 #rc_cache.cache_perms.arguments.lock_auto_renewal = true
 
 ; ***************************************************
 ; `cache_repo` cache for file tree, Readme, RSS FEEDS
 ; for simplicity use rc.file_namespace backend,
 ; for performance and scale use rc.redis
 ; ***************************************************
 rc_cache.cache_repo.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_repo.expiration_time = 2592000
 ; file cache store path. Defaults to `cache_dir =` value or tempdir if both values are not set
 #rc_cache.cache_repo.arguments.filename = /tmp/cache_repo_db
 
 ; alternative `cache_repo` redis backend with distributed lock
 #rc_cache.cache_repo.backend = dogpile.cache.rc.redis
 #rc_cache.cache_repo.expiration_time = 2592000
 
 ; redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_repo.arguments.redis_expiration_time = 2678400
 
 #rc_cache.cache_repo.arguments.host = localhost
 #rc_cache.cache_repo.arguments.port = 6379
 #rc_cache.cache_repo.arguments.db = 1
 #rc_cache.cache_repo.arguments.socket_timeout = 30
 ; more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_repo.arguments.distributed_lock = true
 
 ; auto-renew lock to prevent stale locks, slower but safer. Use only if problems happen
 #rc_cache.cache_repo.arguments.lock_auto_renewal = true
 
 ; ##############
 ; BEAKER SESSION
 ; ##############
 
 ; beaker.session.type is type of storage options for the logged users sessions. Current allowed
 ; types are file, ext:redis, ext:database, ext:memcached
 ; Fastest ones are ext:redis and ext:database, DO NOT use memory type for session
 #beaker.session.type = file
 #beaker.session.data_dir = %(here)s/data/sessions
 
 ; Redis based sessions
 beaker.session.type = ext:redis
 beaker.session.url = redis://redis:6379/2
 
 ; DB based session, fast, and allows easy management over logged in users
 #beaker.session.type = ext:database
 #beaker.session.table_name = db_session
 #beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.session.sa.pool_recycle = 3600
 #beaker.session.sa.echo = false
 
 beaker.session.key = rhodecode
 beaker.session.secret = develop-rc-uytcxaz
 beaker.session.lock_dir = /data_ramdisk/lock
 
 ; Secure encrypted cookie. Requires AES and AES python libraries
 ; you must disable beaker.session.secret to use this
 #beaker.session.encrypt_key = key_for_encryption
 #beaker.session.validate_key = validation_key
 
 ; Sets session as invalid (also logging out user) if it haven not been
 ; accessed for given amount of time in seconds
 beaker.session.timeout = 2592000
 beaker.session.httponly = true
 
 ; Path to use for the cookie. Set to prefix if you use prefix middleware
 #beaker.session.cookie_path = /custom_prefix
 
 ; Set https secure cookie
 beaker.session.secure = false
 
 ; default cookie expiration time in seconds, set to `true` to set expire
 ; at browser close
 #beaker.session.cookie_expires = 3600
 
 ; #############################
 ; SEARCH INDEXING CONFIGURATION
 ; #############################
 
 ; Full text search indexer is available in rhodecode-tools under
 ; `rhodecode-tools index` command
 
 ; WHOOSH Backend, doesn't require additional services to run
 ; it works good with few dozen repos
 search.module = rhodecode.lib.index.whoosh
 search.location = %(here)s/data/index
 
 ; ####################
 ; CHANNELSTREAM CONFIG
 ; ####################
 
 ; channelstream enables persistent connections and live notification
 ; in the system. It's also used by the chat system
 
 channelstream.enabled = true
 
 ; server address for channelstream server on the backend
 channelstream.server = channelstream:9800
 
 ; location of the channelstream server from outside world
 ; use ws:// for http or wss:// for https. This address needs to be handled
 ; by external HTTP server such as Nginx or Apache
 ; see Nginx/Apache configuration examples in our docs
 channelstream.ws_url = ws://rhodecode.yourserver.com/_channelstream
 channelstream.secret = ENV_GENERATED
 channelstream.history.location = /var/opt/rhodecode_data/channelstream_history
 
 ; Internal application path that Javascript uses to connect into.
 ; If you use proxy-prefix the prefix should be added before /_channelstream
 channelstream.proxy_path = /_channelstream
 
 
 ; ##############################
 ; MAIN RHODECODE DATABASE CONFIG
 ; ##############################
 
 #sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 #sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 #sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode?charset=utf8
 ; pymysql is an alternative driver for MySQL, use in case of problems with default one
 #sqlalchemy.db1.url = mysql+pymysql://root:qweqwe@localhost/rhodecode
 
 sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 
 ; see sqlalchemy docs for other advanced settings
 ; print the sql statements to output
 sqlalchemy.db1.echo = false
 
 ; recycle the connections after this amount of seconds
 sqlalchemy.db1.pool_recycle = 3600
 
 ; the number of connections to keep open inside the connection pool.
 ; 0 indicates no limit
 ; the general calculus with gevent is:
 ; if your system allows 500 concurrent greenlets (max_connections) that all do database access,
 ; then increase pool size + max overflow so that they add up to 500.
 #sqlalchemy.db1.pool_size = 5
 
 ; The number of connections to allow in connection pool "overflow", that is
 ; connections that can be opened above and beyond the pool_size setting,
 ; which defaults to five.
 #sqlalchemy.db1.max_overflow = 10
 
 ; Connection check ping, used to detect broken database connections
 ; could be enabled to better handle cases if MySQL has gone away errors
 #sqlalchemy.db1.ping_connection = true
 
 ; ##########
 ; VCS CONFIG
 ; ##########
 vcs.server.enable = true
 vcs.server = vcsserver:10010
 
 ; Web server connectivity protocol, responsible for web based VCS operations
 ; Available protocols are:
 ; `http` - use http-rpc backend (default)
 vcs.server.protocol = http
 
 ; Push/Pull operations protocol, available options are:
 ; `http` - use http-rpc backend (default)
 vcs.scm_app_implementation = http
 
 ; Push/Pull operations hooks protocol, available options are:
 ; `http` - use http-rpc backend (default)
 ; `celery` - use celery based hooks
 vcs.hooks.protocol = http
 
 ; Host on which this instance is listening for hooks. vcsserver will call this host to pull/push hooks so it should be
 ; accessible via network.
 ; Use vcs.hooks.host = "*" to bind to current hostname (for Docker)
 vcs.hooks.host = *
 
 ; Start VCSServer with this instance as a subprocess, useful for development
 vcs.start_server = false
 
 ; List of enabled VCS backends, available options are:
 ; `hg`  - mercurial
 ; `git` - git
 ; `svn` - subversion
 vcs.backends = hg, git, svn
 
 ; Wait this number of seconds before killing connection to the vcsserver
 vcs.connection_timeout = 3600
 
 ; Cache flag to cache vcsserver remote calls locally
 ; It uses cache_region `cache_repo`
 vcs.methods.cache = true
 
 ; ####################################################
 ; Subversion proxy support (mod_dav_svn)
 ; Maps RhodeCode repo groups into SVN paths for Apache
 ; ####################################################
 
 ; Compatibility version when creating SVN repositories. Defaults to newest version when commented out.
 ; Set a numeric version for your current SVN e.g 1.8, or 1.12
 ; Legacy available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible, pre-1.9-compatible
 #vcs.svn.compatible_version = 1.8
 
 ; Enable SVN proxy of requests over HTTP
 vcs.svn.proxy.enabled = true
 
 ; host to connect to running SVN subsystem
 vcs.svn.proxy.host = http://svn:8090
 
 ; Enable or disable the config file generation.
 svn.proxy.generate_config = true
 
 ; Generate config file with `SVNListParentPath` set to `On`.
 svn.proxy.list_parent_path = true
 
 ; Set location and file name of generated config file.
 svn.proxy.config_file_path = /etc/rhodecode/conf/svn/mod_dav_svn.conf
 
 ; alternative mod_dav config template. This needs to be a valid mako template
 ; Example template can be found in the source code:
 ; rhodecode/apps/svn_support/templates/mod-dav-svn.conf.mako
 #svn.proxy.config_template = ~/.rccontrol/enterprise-1/custom_svn_conf.mako
 
 ; Used as a prefix to the `Location` block in the generated config file.
 ; In most cases it should be set to `/`.
 svn.proxy.location_root = /
 
 ; Command to reload the mod dav svn configuration on change.
 ; Example: `/etc/init.d/apache2 reload` or /home/USER/apache_reload.sh
 ; Make sure user who runs RhodeCode process is allowed to reload Apache
 #svn.proxy.reload_cmd = /etc/init.d/apache2 reload
 
 ; If the timeout expires before the reload command finishes, the command will
 ; be killed. Setting it to zero means no timeout. Defaults to 10 seconds.
 #svn.proxy.reload_timeout = 10
 
 ; ####################
 ; SSH Support Settings
 ; ####################
 
 ; Defines if a custom authorized_keys file should be created and written on
 ; any change user ssh keys. Setting this to false also disables possibility
 ; of adding SSH keys by users from web interface. Super admins can still
 ; manage SSH Keys.
 ssh.generate_authorized_keyfile = true
 
 ; Options for ssh, default is `no-pty,no-port-forwarding,no-X11-forwarding,no-agent-forwarding`
 # ssh.authorized_keys_ssh_opts =
 
 ; Path to the authorized_keys file where the generate entries are placed.
 ; It is possible to have multiple key files specified in `sshd_config` e.g.
 ; AuthorizedKeysFile %h/.ssh/authorized_keys %h/.ssh/authorized_keys_rhodecode
 ssh.authorized_keys_file_path = /etc/rhodecode/conf/ssh/authorized_keys_rhodecode
 
 ; Command to execute the SSH wrapper. The binary is available in the
 ; RhodeCode installation directory.
 ; legacy: /usr/local/bin/rhodecode_bin/bin/rc-ssh-wrapper
 ; new rewrite: /usr/local/bin/rhodecode_bin/bin/rc-ssh-wrapper-v2
 ssh.wrapper_cmd = /usr/local/bin/rhodecode_bin/bin/rc-ssh-wrapper
 
 ; Allow shell when executing the ssh-wrapper command
 ssh.wrapper_cmd_allow_shell = false
 
 ; Enables logging, and detailed output send back to the client during SSH
 ; operations. Useful for debugging, shouldn't be used in production.
 ssh.enable_debug_logging = true
 
 ; Paths to binary executable, by default they are the names, but we can
 ; override them if we want to use a custom one
 ssh.executable.hg = /usr/local/bin/rhodecode_bin/vcs_bin/hg
 ssh.executable.git = /usr/local/bin/rhodecode_bin/vcs_bin/git
 ssh.executable.svn = /usr/local/bin/rhodecode_bin/vcs_bin/svnserve
 
 ; Enables SSH key generator web interface. Disabling this still allows users
 ; to add their own keys.
 ssh.enable_ui_key_generator = true
 
 ; Statsd client config, this is used to send metrics to statsd
 ; We recommend setting statsd_exported and scrape them using Prometheus
 #statsd.enabled = false
 #statsd.statsd_host = 0.0.0.0
 #statsd.statsd_port = 8125
 #statsd.statsd_prefix =
 #statsd.statsd_ipv6 = false
 
 ; configure logging automatically at server startup set to false
 ; to use the below custom logging config.
 ; RC_LOGGING_FORMATTER
 ; RC_LOGGING_LEVEL
 ; env variables can control the settings for logging in case of autoconfigure
 
 #logging.autoconfigure = true
 
 ; specify your own custom logging config file to configure logging
 #logging.logging_conf_file = /path/to/custom_logging.ini
 
 ; Dummy marker to add new entries after.
 ; Add any custom entries below. Please don't remove this marker.
 custom.conf = 1
 
 
 ; #####################
 ; LOGGING CONFIGURATION
 ; #####################
 
 [loggers]
 keys = root, sqlalchemy, beaker, celery, rhodecode, ssh_wrapper
 
 [handlers]
 keys = console, console_sql
 
 [formatters]
 keys = generic, json, color_formatter, color_formatter_sql
 
 ; #######
 ; LOGGERS
 ; #######
 [logger_root]
 level = NOTSET
 handlers = console
 
 [logger_sqlalchemy]
 level = INFO
 handlers = console_sql
 qualname = sqlalchemy.engine
 propagate = 0
 
 [logger_beaker]
 level = DEBUG
 handlers =
 qualname = beaker.container
 propagate = 1
 
 [logger_rhodecode]
 level = DEBUG
 handlers =
 qualname = rhodecode
 propagate = 1
 
 [logger_ssh_wrapper]
 level = DEBUG
 handlers =
 qualname = ssh_wrapper
 propagate = 1
 
 [logger_celery]
 level = DEBUG
 handlers =
 qualname = celery
 
 
 ; ########
 ; HANDLERS
 ; ########
 
 [handler_console]
 class = StreamHandler
 args = (sys.stderr, )
 level = DEBUG
 ; To enable JSON formatted logs replace 'generic/color_formatter' with 'json'
 ; This allows sending properly formatted logs to grafana loki or elasticsearch
 formatter = color_formatter
 
 [handler_console_sql]
 ; "level = DEBUG" logs SQL queries and results.
 ; "level = INFO" logs SQL queries.
 ; "level = WARN" logs neither.  (Recommended for production systems.)
 class = StreamHandler
 args = (sys.stderr, )
 level = WARN
 ; To enable JSON formatted logs replace 'generic/color_formatter_sql' with 'json'
 ; This allows sending properly formatted logs to grafana loki or elasticsearch
 formatter = color_formatter_sql
 
 ; ##########
 ; FORMATTERS
 ; ##########
 
 [formatter_generic]
 class = rhodecode.lib.logging_formatter.ExceptionAwareFormatter
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter]
 class = rhodecode.lib.logging_formatter.ColorFormatter
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter_sql]
 class = rhodecode.lib.logging_formatter.ColorFormatterSql
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_json]
 format = %(timestamp)s %(levelname)s %(name)s %(message)s %(req_id)s
 class = rhodecode.lib._vendor.jsonlogger.JsonFormatter

configs/production.ini

@@ -1,813 +1,818 b''
 
 ; #########################################
 ; RHODECODE COMMUNITY EDITION CONFIGURATION
 ; #########################################
 
 [DEFAULT]
 ; Debug flag sets all loggers to debug, and enables request tracking
 debug = false
 
 ; ########################################################################
 ; EMAIL CONFIGURATION
 ; These settings will be used by the RhodeCode mailing system
 ; ########################################################################
 
 ; prefix all emails subjects with given prefix, helps filtering out emails
 #email_prefix = [RhodeCode]
 
 ; email FROM address all mails will be sent
 #app_email_from = rhodecode-noreply@localhost
 
 #smtp_server = mail.server.com
 #smtp_username =
 #smtp_password =
 #smtp_port =
 #smtp_use_tls = false
 #smtp_use_ssl = true
 
 [server:main]
 ; COMMON HOST/IP CONFIG, This applies mostly to develop setup,
 ; Host port for gunicorn are controlled by gunicorn_conf.py
 host = 127.0.0.1
 port = 10020
 
 
 ; ###########################
 ; GUNICORN APPLICATION SERVER
 ; ###########################
 
 ; run with gunicorn --paste rhodecode.ini --config gunicorn_conf.py
 
 ; Module to use, this setting shouldn't be changed
 use = egg:gunicorn#main
 
 ; Prefix middleware for RhodeCode.
 ; recommended when using proxy setup.
 ; allows to set RhodeCode under a prefix in server.
 ; eg https://server.com/custom_prefix. Enable `filter-with =` option below as well.
 ; And set your prefix like: `prefix = /custom_prefix`
 ; be sure to also set beaker.session.cookie_path = /custom_prefix if you need
 ; to make your cookies only work on prefix url
 [filter:proxy-prefix]
 use = egg:PasteDeploy#prefix
 prefix = /
 
 [app:main]
 ; The %(here)s variable will be replaced with the absolute path of parent directory
 ; of this file
 ; Each option in the app:main can be override by an environmental variable
 ;
 ;To override an option:
 ;
 ;RC_<KeyName>
 ;Everything should be uppercase, . and - should be replaced by _.
 ;For example, if you have these configuration settings:
 ;rc_cache.repo_object.backend = foo
 ;can be overridden by
 ;export RC_CACHE_REPO_OBJECT_BACKEND=foo
 
 use = egg:rhodecode-enterprise-ce
 
 ; enable proxy prefix middleware, defined above
 #filter-with = proxy-prefix
 
 ; encryption key used to encrypt social plugin tokens,
 ; remote_urls with credentials etc, if not set it defaults to
 ; `beaker.session.secret`
 #rhodecode.encrypted_values.secret =
 
 ; decryption strict mode (enabled by default). It controls if decryption raises
 ; `SignatureVerificationError` in case of wrong key, or damaged encryption data.
 #rhodecode.encrypted_values.strict = false
 
 ; Pick algorithm for encryption. Either fernet (more secure) or aes (default)
 ; fernet is safer, and we strongly recommend switching to it.
 ; Due to backward compatibility aes is used as default.
 #rhodecode.encrypted_values.algorithm = fernet
 
 ; Return gzipped responses from RhodeCode (static files/application)
 gzip_responses = false
 
 ; Auto-generate javascript routes file on startup
 generate_js_files = false
 
 ; System global default language.
 ; All available languages: en (default), be, de, es, fr, it, ja, pl, pt, ru, zh
 lang = en
 
 ; Perform a full repository scan and import on each server start.
 ; Settings this to true could lead to very long startup time.
 startup.import_repos = false
 
 ; URL at which the application is running. This is used for Bootstrapping
 ; requests in context when no web request is available. Used in ishell, or
 ; SSH calls. Set this for events to receive proper url for SSH calls.
 app.base_url = http://rhodecode.local
 
 ; Host at which the Service API is running.
 app.service_api.host = http://rhodecode.local:10020
 
 ; Secret for Service API authentication.
 app.service_api.token =
 
 ; Unique application ID. Should be a random unique string for security.
 app_instance_uuid = rc-production
 
 ; Cut off limit for large diffs (size in bytes). If overall diff size on
 ; commit, or pull request exceeds this limit this diff will be displayed
 ; partially. E.g 512000 == 512Kb
 cut_off_limit_diff = 512000
 
 ; Cut off limit for large files inside diffs (size in bytes). Each individual
 ; file inside diff which exceeds this limit will be displayed partially.
 ;  E.g 128000 == 128Kb
 cut_off_limit_file = 128000
 
 ; Use cached version of vcs repositories everywhere. Recommended to be `true`
 vcs_full_cache = true
 
 ; Force https in RhodeCode, fixes https redirects, assumes it's always https.
 ; Normally this is controlled by proper flags sent from http server such as Nginx or Apache
 force_https = false
 
 ; use Strict-Transport-Security headers
 use_htsts = false
 
 ; Set to true if your repos are exposed using the dumb protocol
 git_update_server_info = false
 
 ; RSS/ATOM feed options
 rss_cut_off_limit = 256000
 rss_items_per_page = 10
 rss_include_diff = false
 
 ; gist URL alias, used to create nicer urls for gist. This should be an
 ; url that does rewrites to _admin/gists/{gistid}.
 ; example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
 ; RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/{gistid}
 gist_alias_url =
 
 ; List of views (using glob pattern syntax) that AUTH TOKENS could be
 ; used for access.
 ; Adding ?auth_token=TOKEN_HASH to the url authenticates this request as if it
 ; came from the the logged in user who own this authentication token.
 ; Additionally @TOKEN syntax can be used to bound the view to specific
 ; authentication token. Such view would be only accessible when used together
 ; with this authentication token
 ; list of all views can be found under `/_admin/permissions/auth_token_access`
 ; The list should be "," separated and on a single line.
 ; Most common views to enable:
 
 #    RepoCommitsView:repo_commit_download
 #    RepoCommitsView:repo_commit_patch
 #    RepoCommitsView:repo_commit_raw
 #    RepoCommitsView:repo_commit_raw@TOKEN
 #    RepoFilesView:repo_files_diff
 #    RepoFilesView:repo_archivefile
 #    RepoFilesView:repo_file_raw
 #    GistView:*
 api_access_controllers_whitelist =
 
 ; Default encoding used to convert from and to unicode
 ; can be also a comma separated list of encoding in case of mixed encodings
 default_encoding = UTF-8
 
 ; instance-id prefix
 ; a prefix key for this instance used for cache invalidation when running
 ; multiple instances of RhodeCode, make sure it's globally unique for
 ; all running RhodeCode instances. Leave empty if you don't use it
 instance_id =
 
 ; Fallback authentication plugin. Set this to a plugin ID to force the usage
 ; of an authentication plugin also if it is disabled by it's settings.
 ; This could be useful if you are unable to log in to the system due to broken
 ; authentication settings. Then you can enable e.g. the internal RhodeCode auth
 ; module to log in again and fix the settings.
 ; Available builtin plugin IDs (hash is part of the ID):
 ; egg:rhodecode-enterprise-ce#rhodecode
 ; egg:rhodecode-enterprise-ce#pam
 ; egg:rhodecode-enterprise-ce#ldap
 ; egg:rhodecode-enterprise-ce#jasig_cas
 ; egg:rhodecode-enterprise-ce#headers
 ; egg:rhodecode-enterprise-ce#crowd
 
 #rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode
 
 ; Flag to control loading of legacy plugins in py:/path format
 auth_plugin.import_legacy_plugins = true
 
 ; alternative return HTTP header for failed authentication. Default HTTP
 ; response is 401 HTTPUnauthorized. Currently HG clients have troubles with
 ; handling that causing a series of failed authentication calls.
 ; Set this variable to 403 to return HTTPForbidden, or any other HTTP code
 ; This will be served instead of default 401 on bad authentication
 auth_ret_code =
 
 ; use special detection method when serving auth_ret_code, instead of serving
 ; ret_code directly, use 401 initially (Which triggers credentials prompt)
 ; and then serve auth_ret_code to clients
 auth_ret_code_detection = false
 
 ; locking return code. When repository is locked return this HTTP code. 2XX
 ; codes don't break the transactions while 4XX codes do
 lock_ret_code = 423
 
 ; Filesystem location were repositories should be stored
 repo_store.path = /var/opt/rhodecode_repo_store
 
 ; allows to setup custom hooks in settings page
 allow_custom_hooks_settings = true
 
 ; Generated license token required for EE edition license.
 ; New generated token value can be found in Admin > settings > license page.
 license_token =
 
 ; This flag hides sensitive information on the license page such as token, and license data
 license.hide_license_info = false
 
 ; supervisor connection uri, for managing supervisor and logs.
 supervisor.uri =
 
 ; supervisord group name/id we only want this RC instance to handle
 supervisor.group_id = prod
 
 ; Display extended labs settings
 labs_settings_active = true
 
 ; Custom exception store path, defaults to TMPDIR
 ; This is used to store exception from RhodeCode in shared directory
 #exception_tracker.store_path =
 
 ; Send email with exception details when it happens
 #exception_tracker.send_email = false
 
 ; Comma separated list of recipients for exception emails,
 ; e.g [e-mail],[e-mail]
 ; Can be left empty, then emails will be sent to ALL super-admins
 #exception_tracker.send_email_recipients =
 
 ; optional prefix to Add to email Subject
 #exception_tracker.email_prefix = [RHODECODE ERROR]
 
 ; File store configuration. This is used to store and serve uploaded files
 file_store.enabled = true
 
 ; Storage backend, available options are: local
 file_store.backend = local
 
 ; path to store the uploaded binaries and artifacts
 file_store.storage_path = /var/opt/rhodecode_data/file_store
 
 
 ; Redis url to acquire/check generation of archives locks
 archive_cache.locking.url = redis://redis:6379/1
 
 ; Storage backend, only 'filesystem' and 'objectstore' are available now
 archive_cache.backend.type = filesystem
 
 ; url for s3 compatible storage that allows to upload artifacts
 ; e.g http://minio:9000
 archive_cache.objectstore.url = http://s3-minio:9000
 
 ; key for s3 auth
 archive_cache.objectstore.key = key
 
 ; secret for s3 auth
 archive_cache.objectstore.secret = secret
 
 ; number of sharded buckets to create to distribute archives across
 ; default is 8 shards
 archive_cache.objectstore.bucket_shards = 8
 
+; a top-level bucket to put all other sharded buckets in
+; in case it's empty all buckets will be created in top-level (not recommended)
+; objects will be stored in rhodecode-archive-cache/shard-bucket-N based on the bucket_shards number
+archive_cache.objectstore.bucket_root = rhodecode-archive-cache
+
 ; if true, this cache will try to retry with retry_attempts=N times waiting retry_backoff time
 archive_cache.objectstore.retry = false
 
 ; number of seconds to wait for next try using retry
 archive_cache.objectstore.retry_backoff = 1
 
 ; how many tries do do a retry fetch from this backend
 archive_cache.objectstore.retry_attempts = 10
 
 ; Default is $cache_dir/archive_cache if not set
 ; Generated repo archives will be cached at this location
 ; and served from the cache during subsequent requests for the same archive of
 ; the repository. This path is important to be shared across filesystems and with
 ; RhodeCode and vcsserver
 archive_cache.filesystem.store_dir = /var/opt/rhodecode_data/archive_cache
 
 ; The limit in GB sets how much data we cache before recycling last used, defaults to 10 gb
 archive_cache.filesystem.cache_size_gb = 40
 
 ; Eviction policy used to clear out after cache_size_gb limit is reached
 archive_cache.filesystem.eviction_policy = least-recently-stored
 
 ; By default cache uses sharding technique, this specifies how many shards are there
 ; default is 8 shards
 archive_cache.filesystem.cache_shards = 8
 
 ; if true, this cache will try to retry with retry_attempts=N times waiting retry_backoff time
 archive_cache.filesystem.retry = false
 
 ; number of seconds to wait for next try using retry
 archive_cache.filesystem.retry_backoff = 1
 
 ; how many tries do do a retry fetch from this backend
 archive_cache.filesystem.retry_attempts = 10
 
 
 ; #############
 ; CELERY CONFIG
 ; #############
 
 ; manually run celery: /path/to/celery worker --task-events --beat --app rhodecode.lib.celerylib.loader --scheduler rhodecode.lib.celerylib.scheduler.RcScheduler --loglevel DEBUG --ini /path/to/rhodecode.ini
 
 use_celery = true
 
 ; path to store schedule database
 #celerybeat-schedule.path =
 
 ; connection url to the message broker (default redis)
 celery.broker_url = redis://redis:6379/8
 
 ; results backend to get results for (default redis)
 celery.result_backend = redis://redis:6379/8
 
 ; rabbitmq example
 #celery.broker_url = amqp://rabbitmq:qweqwe@localhost:5672/rabbitmqhost
 
 ; maximum tasks to execute before worker restart
 celery.max_tasks_per_child = 20
 
 ; tasks will never be sent to the queue, but executed locally instead.
 celery.task_always_eager = false
 
 ; #############
 ; DOGPILE CACHE
 ; #############
 
 ; Default cache dir for caches. Putting this into a ramdisk can boost performance.
 ; eg. /tmpfs/data_ramdisk, however this directory might require large amount of space
 cache_dir = /var/opt/rhodecode_data
 
 ; *********************************************
 ; `sql_cache_short` cache for heavy SQL queries
 ; Only supported backend is `memory_lru`
 ; *********************************************
 rc_cache.sql_cache_short.backend = dogpile.cache.rc.memory_lru
 rc_cache.sql_cache_short.expiration_time = 30
 
 
 ; *****************************************************
 ; `cache_repo_longterm` cache for repo object instances
 ; Only supported backend is `memory_lru`
 ; *****************************************************
 rc_cache.cache_repo_longterm.backend = dogpile.cache.rc.memory_lru
 ; by default we use 30 Days, cache is still invalidated on push
 rc_cache.cache_repo_longterm.expiration_time = 2592000
 ; max items in LRU cache, set to smaller number to save memory, and expire last used caches
 rc_cache.cache_repo_longterm.max_size = 10000
 
 
 ; *********************************************
 ; `cache_general` cache for general purpose use
 ; for simplicity use rc.file_namespace backend,
 ; for performance and scale use rc.redis
 ; *********************************************
 rc_cache.cache_general.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_general.expiration_time = 43200
 ; file cache store path. Defaults to `cache_dir =` value or tempdir if both values are not set
 #rc_cache.cache_general.arguments.filename = /tmp/cache_general_db
 
 ; alternative `cache_general` redis backend with distributed lock
 #rc_cache.cache_general.backend = dogpile.cache.rc.redis
 #rc_cache.cache_general.expiration_time = 300
 
 ; redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_general.arguments.redis_expiration_time = 7200
 
 #rc_cache.cache_general.arguments.host = localhost
 #rc_cache.cache_general.arguments.port = 6379
 #rc_cache.cache_general.arguments.db = 0
 #rc_cache.cache_general.arguments.socket_timeout = 30
 ; more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_general.arguments.distributed_lock = true
 
 ; auto-renew lock to prevent stale locks, slower but safer. Use only if problems happen
 #rc_cache.cache_general.arguments.lock_auto_renewal = true
 
 ; *************************************************
 ; `cache_perms` cache for permission tree, auth TTL
 ; for simplicity use rc.file_namespace backend,
 ; for performance and scale use rc.redis
 ; *************************************************
 rc_cache.cache_perms.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_perms.expiration_time = 3600
 ; file cache store path. Defaults to `cache_dir =` value or tempdir if both values are not set
 #rc_cache.cache_perms.arguments.filename = /tmp/cache_perms_db
 
 ; alternative `cache_perms` redis backend with distributed lock
 #rc_cache.cache_perms.backend = dogpile.cache.rc.redis
 #rc_cache.cache_perms.expiration_time = 300
 
 ; redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_perms.arguments.redis_expiration_time = 7200
 
 #rc_cache.cache_perms.arguments.host = localhost
 #rc_cache.cache_perms.arguments.port = 6379
 #rc_cache.cache_perms.arguments.db = 0
 #rc_cache.cache_perms.arguments.socket_timeout = 30
 ; more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_perms.arguments.distributed_lock = true
 
 ; auto-renew lock to prevent stale locks, slower but safer. Use only if problems happen
 #rc_cache.cache_perms.arguments.lock_auto_renewal = true
 
 ; ***************************************************
 ; `cache_repo` cache for file tree, Readme, RSS FEEDS
 ; for simplicity use rc.file_namespace backend,
 ; for performance and scale use rc.redis
 ; ***************************************************
 rc_cache.cache_repo.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_repo.expiration_time = 2592000
 ; file cache store path. Defaults to `cache_dir =` value or tempdir if both values are not set
 #rc_cache.cache_repo.arguments.filename = /tmp/cache_repo_db
 
 ; alternative `cache_repo` redis backend with distributed lock
 #rc_cache.cache_repo.backend = dogpile.cache.rc.redis
 #rc_cache.cache_repo.expiration_time = 2592000
 
 ; redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_repo.arguments.redis_expiration_time = 2678400
 
 #rc_cache.cache_repo.arguments.host = localhost
 #rc_cache.cache_repo.arguments.port = 6379
 #rc_cache.cache_repo.arguments.db = 1
 #rc_cache.cache_repo.arguments.socket_timeout = 30
 ; more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_repo.arguments.distributed_lock = true
 
 ; auto-renew lock to prevent stale locks, slower but safer. Use only if problems happen
 #rc_cache.cache_repo.arguments.lock_auto_renewal = true
 
 ; ##############
 ; BEAKER SESSION
 ; ##############
 
 ; beaker.session.type is type of storage options for the logged users sessions. Current allowed
 ; types are file, ext:redis, ext:database, ext:memcached
 ; Fastest ones are ext:redis and ext:database, DO NOT use memory type for session
 #beaker.session.type = file
 #beaker.session.data_dir = %(here)s/data/sessions
 
 ; Redis based sessions
 beaker.session.type = ext:redis
 beaker.session.url = redis://redis:6379/2
 
 ; DB based session, fast, and allows easy management over logged in users
 #beaker.session.type = ext:database
 #beaker.session.table_name = db_session
 #beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.session.sa.pool_recycle = 3600
 #beaker.session.sa.echo = false
 
 beaker.session.key = rhodecode
 beaker.session.secret = production-rc-uytcxaz
 beaker.session.lock_dir = /data_ramdisk/lock
 
 ; Secure encrypted cookie. Requires AES and AES python libraries
 ; you must disable beaker.session.secret to use this
 #beaker.session.encrypt_key = key_for_encryption
 #beaker.session.validate_key = validation_key
 
 ; Sets session as invalid (also logging out user) if it haven not been
 ; accessed for given amount of time in seconds
 beaker.session.timeout = 2592000
 beaker.session.httponly = true
 
 ; Path to use for the cookie. Set to prefix if you use prefix middleware
 #beaker.session.cookie_path = /custom_prefix
 
 ; Set https secure cookie
 beaker.session.secure = false
 
 ; default cookie expiration time in seconds, set to `true` to set expire
 ; at browser close
 #beaker.session.cookie_expires = 3600
 
 ; #############################
 ; SEARCH INDEXING CONFIGURATION
 ; #############################
 
 ; Full text search indexer is available in rhodecode-tools under
 ; `rhodecode-tools index` command
 
 ; WHOOSH Backend, doesn't require additional services to run
 ; it works good with few dozen repos
 search.module = rhodecode.lib.index.whoosh
 search.location = %(here)s/data/index
 
 ; ####################
 ; CHANNELSTREAM CONFIG
 ; ####################
 
 ; channelstream enables persistent connections and live notification
 ; in the system. It's also used by the chat system
 
 channelstream.enabled = true
 
 ; server address for channelstream server on the backend
 channelstream.server = channelstream:9800
 
 ; location of the channelstream server from outside world
 ; use ws:// for http or wss:// for https. This address needs to be handled
 ; by external HTTP server such as Nginx or Apache
 ; see Nginx/Apache configuration examples in our docs
 channelstream.ws_url = ws://rhodecode.yourserver.com/_channelstream
 channelstream.secret = ENV_GENERATED
 channelstream.history.location = /var/opt/rhodecode_data/channelstream_history
 
 ; Internal application path that Javascript uses to connect into.
 ; If you use proxy-prefix the prefix should be added before /_channelstream
 channelstream.proxy_path = /_channelstream
 
 
 ; ##############################
 ; MAIN RHODECODE DATABASE CONFIG
 ; ##############################
 
 #sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 #sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 #sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode?charset=utf8
 ; pymysql is an alternative driver for MySQL, use in case of problems with default one
 #sqlalchemy.db1.url = mysql+pymysql://root:qweqwe@localhost/rhodecode
 
 sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 
 ; see sqlalchemy docs for other advanced settings
 ; print the sql statements to output
 sqlalchemy.db1.echo = false
 
 ; recycle the connections after this amount of seconds
 sqlalchemy.db1.pool_recycle = 3600
 
 ; the number of connections to keep open inside the connection pool.
 ; 0 indicates no limit
 ; the general calculus with gevent is:
 ; if your system allows 500 concurrent greenlets (max_connections) that all do database access,
 ; then increase pool size + max overflow so that they add up to 500.
 #sqlalchemy.db1.pool_size = 5
 
 ; The number of connections to allow in connection pool "overflow", that is
 ; connections that can be opened above and beyond the pool_size setting,
 ; which defaults to five.
 #sqlalchemy.db1.max_overflow = 10
 
 ; Connection check ping, used to detect broken database connections
 ; could be enabled to better handle cases if MySQL has gone away errors
 #sqlalchemy.db1.ping_connection = true
 
 ; ##########
 ; VCS CONFIG
 ; ##########
 vcs.server.enable = true
 vcs.server = vcsserver:10010
 
 ; Web server connectivity protocol, responsible for web based VCS operations
 ; Available protocols are:
 ; `http` - use http-rpc backend (default)
 vcs.server.protocol = http
 
 ; Push/Pull operations protocol, available options are:
 ; `http` - use http-rpc backend (default)
 vcs.scm_app_implementation = http
 
 ; Push/Pull operations hooks protocol, available options are:
 ; `http` - use http-rpc backend (default)
 ; `celery` - use celery based hooks
 vcs.hooks.protocol = http
 
 ; Host on which this instance is listening for hooks. vcsserver will call this host to pull/push hooks so it should be
 ; accessible via network.
 ; Use vcs.hooks.host = "*" to bind to current hostname (for Docker)
 vcs.hooks.host = *
 
 ; Start VCSServer with this instance as a subprocess, useful for development
 vcs.start_server = false
 
 ; List of enabled VCS backends, available options are:
 ; `hg`  - mercurial
 ; `git` - git
 ; `svn` - subversion
 vcs.backends = hg, git, svn
 
 ; Wait this number of seconds before killing connection to the vcsserver
 vcs.connection_timeout = 3600
 
 ; Cache flag to cache vcsserver remote calls locally
 ; It uses cache_region `cache_repo`
 vcs.methods.cache = true
 
 ; ####################################################
 ; Subversion proxy support (mod_dav_svn)
 ; Maps RhodeCode repo groups into SVN paths for Apache
 ; ####################################################
 
 ; Compatibility version when creating SVN repositories. Defaults to newest version when commented out.
 ; Set a numeric version for your current SVN e.g 1.8, or 1.12
 ; Legacy available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible, pre-1.9-compatible
 #vcs.svn.compatible_version = 1.8
 
 ; Enable SVN proxy of requests over HTTP
 vcs.svn.proxy.enabled = true
 
 ; host to connect to running SVN subsystem
 vcs.svn.proxy.host = http://svn:8090
 
 ; Enable or disable the config file generation.
 svn.proxy.generate_config = true
 
 ; Generate config file with `SVNListParentPath` set to `On`.
 svn.proxy.list_parent_path = true
 
 ; Set location and file name of generated config file.
 svn.proxy.config_file_path = /etc/rhodecode/conf/svn/mod_dav_svn.conf
 
 ; alternative mod_dav config template. This needs to be a valid mako template
 ; Example template can be found in the source code:
 ; rhodecode/apps/svn_support/templates/mod-dav-svn.conf.mako
 #svn.proxy.config_template = ~/.rccontrol/enterprise-1/custom_svn_conf.mako
 
 ; Used as a prefix to the `Location` block in the generated config file.
 ; In most cases it should be set to `/`.
 svn.proxy.location_root = /
 
 ; Command to reload the mod dav svn configuration on change.
 ; Example: `/etc/init.d/apache2 reload` or /home/USER/apache_reload.sh
 ; Make sure user who runs RhodeCode process is allowed to reload Apache
 #svn.proxy.reload_cmd = /etc/init.d/apache2 reload
 
 ; If the timeout expires before the reload command finishes, the command will
 ; be killed. Setting it to zero means no timeout. Defaults to 10 seconds.
 #svn.proxy.reload_timeout = 10
 
 ; ####################
 ; SSH Support Settings
 ; ####################
 
 ; Defines if a custom authorized_keys file should be created and written on
 ; any change user ssh keys. Setting this to false also disables possibility
 ; of adding SSH keys by users from web interface. Super admins can still
 ; manage SSH Keys.
 ssh.generate_authorized_keyfile = true
 
 ; Options for ssh, default is `no-pty,no-port-forwarding,no-X11-forwarding,no-agent-forwarding`
 # ssh.authorized_keys_ssh_opts =
 
 ; Path to the authorized_keys file where the generate entries are placed.
 ; It is possible to have multiple key files specified in `sshd_config` e.g.
 ; AuthorizedKeysFile %h/.ssh/authorized_keys %h/.ssh/authorized_keys_rhodecode
 ssh.authorized_keys_file_path = /etc/rhodecode/conf/ssh/authorized_keys_rhodecode
 
 ; Command to execute the SSH wrapper. The binary is available in the
 ; RhodeCode installation directory.
 ; legacy: /usr/local/bin/rhodecode_bin/bin/rc-ssh-wrapper
 ; new rewrite: /usr/local/bin/rhodecode_bin/bin/rc-ssh-wrapper-v2
 ssh.wrapper_cmd = /usr/local/bin/rhodecode_bin/bin/rc-ssh-wrapper
 
 ; Allow shell when executing the ssh-wrapper command
 ssh.wrapper_cmd_allow_shell = false
 
 ; Enables logging, and detailed output send back to the client during SSH
 ; operations. Useful for debugging, shouldn't be used in production.
 ssh.enable_debug_logging = false
 
 ; Paths to binary executable, by default they are the names, but we can
 ; override them if we want to use a custom one
 ssh.executable.hg = /usr/local/bin/rhodecode_bin/vcs_bin/hg
 ssh.executable.git = /usr/local/bin/rhodecode_bin/vcs_bin/git
 ssh.executable.svn = /usr/local/bin/rhodecode_bin/vcs_bin/svnserve
 
 ; Enables SSH key generator web interface. Disabling this still allows users
 ; to add their own keys.
 ssh.enable_ui_key_generator = true
 
 ; Statsd client config, this is used to send metrics to statsd
 ; We recommend setting statsd_exported and scrape them using Prometheus
 #statsd.enabled = false
 #statsd.statsd_host = 0.0.0.0
 #statsd.statsd_port = 8125
 #statsd.statsd_prefix =
 #statsd.statsd_ipv6 = false
 
 ; configure logging automatically at server startup set to false
 ; to use the below custom logging config.
 ; RC_LOGGING_FORMATTER
 ; RC_LOGGING_LEVEL
 ; env variables can control the settings for logging in case of autoconfigure
 
 #logging.autoconfigure = true
 
 ; specify your own custom logging config file to configure logging
 #logging.logging_conf_file = /path/to/custom_logging.ini
 
 ; Dummy marker to add new entries after.
 ; Add any custom entries below. Please don't remove this marker.
 custom.conf = 1
 
 
 ; #####################
 ; LOGGING CONFIGURATION
 ; #####################
 
 [loggers]
 keys = root, sqlalchemy, beaker, celery, rhodecode, ssh_wrapper
 
 [handlers]
 keys = console, console_sql
 
 [formatters]
 keys = generic, json, color_formatter, color_formatter_sql
 
 ; #######
 ; LOGGERS
 ; #######
 [logger_root]
 level = NOTSET
 handlers = console
 
 [logger_sqlalchemy]
 level = INFO
 handlers = console_sql
 qualname = sqlalchemy.engine
 propagate = 0
 
 [logger_beaker]
 level = DEBUG
 handlers =
 qualname = beaker.container
 propagate = 1
 
 [logger_rhodecode]
 level = DEBUG
 handlers =
 qualname = rhodecode
 propagate = 1
 
 [logger_ssh_wrapper]
 level = DEBUG
 handlers =
 qualname = ssh_wrapper
 propagate = 1
 
 [logger_celery]
 level = DEBUG
 handlers =
 qualname = celery
 
 
 ; ########
 ; HANDLERS
 ; ########
 
 [handler_console]
 class = StreamHandler
 args = (sys.stderr, )
 level = INFO
 ; To enable JSON formatted logs replace 'generic/color_formatter' with 'json'
 ; This allows sending properly formatted logs to grafana loki or elasticsearch
 formatter = generic
 
 [handler_console_sql]
 ; "level = DEBUG" logs SQL queries and results.
 ; "level = INFO" logs SQL queries.
 ; "level = WARN" logs neither.  (Recommended for production systems.)
 class = StreamHandler
 args = (sys.stderr, )
 level = WARN
 ; To enable JSON formatted logs replace 'generic/color_formatter_sql' with 'json'
 ; This allows sending properly formatted logs to grafana loki or elasticsearch
 formatter = generic
 
 ; ##########
 ; FORMATTERS
 ; ##########
 
 [formatter_generic]
 class = rhodecode.lib.logging_formatter.ExceptionAwareFormatter
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter]
 class = rhodecode.lib.logging_formatter.ColorFormatter
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter_sql]
 class = rhodecode.lib.logging_formatter.ColorFormatterSql
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_json]
 format = %(timestamp)s %(levelname)s %(name)s %(message)s %(req_id)s
 class = rhodecode.lib._vendor.jsonlogger.JsonFormatter

rhodecode/tests/rhodecode.ini

@@ -1,827 +1,832 b''
 
 ; #########################################
 ; RHODECODE COMMUNITY EDITION CONFIGURATION
 ; #########################################
 
 [DEFAULT]
 ; Debug flag sets all loggers to debug, and enables request tracking
 debug = true
 
 ; ########################################################################
 ; EMAIL CONFIGURATION
 ; These settings will be used by the RhodeCode mailing system
 ; ########################################################################
 
 ; prefix all emails subjects with given prefix, helps filtering out emails
 #email_prefix = [RhodeCode]
 
 ; email FROM address all mails will be sent
 #app_email_from = rhodecode-noreply@localhost
 
 #smtp_server = mail.server.com
 #smtp_username =
 #smtp_password =
 #smtp_port =
 #smtp_use_tls = false
 #smtp_use_ssl = true
 
 [server:main]
 ; COMMON HOST/IP CONFIG, This applies mostly to develop setup,
 ; Host port for gunicorn are controlled by gunicorn_conf.py
 host = 127.0.0.1
 port = 10020
 
 
 ; ###########################
 ; GUNICORN APPLICATION SERVER
 ; ###########################
 
 ; run with gunicorn --paste rhodecode.ini --config gunicorn_conf.py
 
 ; Module to use, this setting shouldn't be changed
 use = egg:gunicorn#main
 
 ; Prefix middleware for RhodeCode.
 ; recommended when using proxy setup.
 ; allows to set RhodeCode under a prefix in server.
 ; eg https://server.com/custom_prefix. Enable `filter-with =` option below as well.
 ; And set your prefix like: `prefix = /custom_prefix`
 ; be sure to also set beaker.session.cookie_path = /custom_prefix if you need
 ; to make your cookies only work on prefix url
 [filter:proxy-prefix]
 use = egg:PasteDeploy#prefix
 prefix = /
 
 [app:main]
 ; The %(here)s variable will be replaced with the absolute path of parent directory
 ; of this file
 ; Each option in the app:main can be override by an environmental variable
 ;
 ;To override an option:
 ;
 ;RC_<KeyName>
 ;Everything should be uppercase, . and - should be replaced by _.
 ;For example, if you have these configuration settings:
 ;rc_cache.repo_object.backend = foo
 ;can be overridden by
 ;export RC_CACHE_REPO_OBJECT_BACKEND=foo
 
 use = egg:rhodecode-enterprise-ce
 
 ; enable proxy prefix middleware, defined above
 #filter-with = proxy-prefix
 
 ; encryption key used to encrypt social plugin tokens,
 ; remote_urls with credentials etc, if not set it defaults to
 ; `beaker.session.secret`
 #rhodecode.encrypted_values.secret =
 
 ; decryption strict mode (enabled by default). It controls if decryption raises
 ; `SignatureVerificationError` in case of wrong key, or damaged encryption data.
 #rhodecode.encrypted_values.strict = false
 
 ; Pick algorithm for encryption. Either fernet (more secure) or aes (default)
 ; fernet is safer, and we strongly recommend switching to it.
 ; Due to backward compatibility aes is used as default.
 #rhodecode.encrypted_values.algorithm = fernet
 
 ; Return gzipped responses from RhodeCode (static files/application)
 gzip_responses = false
 
 ; Auto-generate javascript routes file on startup
 generate_js_files = false
 
 ; System global default language.
 ; All available languages: en (default), be, de, es, fr, it, ja, pl, pt, ru, zh
 lang = en
 
 ; Perform a full repository scan and import on each server start.
 ; Settings this to true could lead to very long startup time.
 startup.import_repos = true
 
 ; URL at which the application is running. This is used for Bootstrapping
 ; requests in context when no web request is available. Used in ishell, or
 ; SSH calls. Set this for events to receive proper url for SSH calls.
 app.base_url = http://rhodecode.local
 
 ; Host at which the Service API is running.
 app.service_api.host = http://rhodecode.local:10020
 
 ; Secret for Service API authentication.
 app.service_api.token =
 
 ; Unique application ID. Should be a random unique string for security.
 app_instance_uuid = rc-production
 
 ; Cut off limit for large diffs (size in bytes). If overall diff size on
 ; commit, or pull request exceeds this limit this diff will be displayed
 ; partially. E.g 512000 == 512Kb
 cut_off_limit_diff = 1024000
 
 ; Cut off limit for large files inside diffs (size in bytes). Each individual
 ; file inside diff which exceeds this limit will be displayed partially.
 ;  E.g 128000 == 128Kb
 cut_off_limit_file = 256000
 
 ; Use cached version of vcs repositories everywhere. Recommended to be `true`
 vcs_full_cache = false
 
 ; Force https in RhodeCode, fixes https redirects, assumes it's always https.
 ; Normally this is controlled by proper flags sent from http server such as Nginx or Apache
 force_https = false
 
 ; use Strict-Transport-Security headers
 use_htsts = false
 
 ; Set to true if your repos are exposed using the dumb protocol
 git_update_server_info = false
 
 ; RSS/ATOM feed options
 rss_cut_off_limit = 256000
 rss_items_per_page = 10
 rss_include_diff = false
 
 ; gist URL alias, used to create nicer urls for gist. This should be an
 ; url that does rewrites to _admin/gists/{gistid}.
 ; example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
 ; RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/{gistid}
 gist_alias_url =
 
 ; List of views (using glob pattern syntax) that AUTH TOKENS could be
 ; used for access.
 ; Adding ?auth_token=TOKEN_HASH to the url authenticates this request as if it
 ; came from the the logged in user who own this authentication token.
 ; Additionally @TOKEN syntax can be used to bound the view to specific
 ; authentication token. Such view would be only accessible when used together
 ; with this authentication token
 ; list of all views can be found under `/_admin/permissions/auth_token_access`
 ; The list should be "," separated and on a single line.
 ; Most common views to enable:
 
 #    RepoCommitsView:repo_commit_download
 #    RepoCommitsView:repo_commit_patch
 #    RepoCommitsView:repo_commit_raw
 #    RepoCommitsView:repo_commit_raw@TOKEN
 #    RepoFilesView:repo_files_diff
 #    RepoFilesView:repo_archivefile
 #    RepoFilesView:repo_file_raw
 #    GistView:*
 api_access_controllers_whitelist =
 
 ; Default encoding used to convert from and to unicode
 ; can be also a comma separated list of encoding in case of mixed encodings
 default_encoding = UTF-8
 
 ; instance-id prefix
 ; a prefix key for this instance used for cache invalidation when running
 ; multiple instances of RhodeCode, make sure it's globally unique for
 ; all running RhodeCode instances. Leave empty if you don't use it
 instance_id =
 
 ; Fallback authentication plugin. Set this to a plugin ID to force the usage
 ; of an authentication plugin also if it is disabled by it's settings.
 ; This could be useful if you are unable to log in to the system due to broken
 ; authentication settings. Then you can enable e.g. the internal RhodeCode auth
 ; module to log in again and fix the settings.
 ; Available builtin plugin IDs (hash is part of the ID):
 ; egg:rhodecode-enterprise-ce#rhodecode
 ; egg:rhodecode-enterprise-ce#pam
 ; egg:rhodecode-enterprise-ce#ldap
 ; egg:rhodecode-enterprise-ce#jasig_cas
 ; egg:rhodecode-enterprise-ce#headers
 ; egg:rhodecode-enterprise-ce#crowd
 
 #rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode
 
 ; Flag to control loading of legacy plugins in py:/path format
 auth_plugin.import_legacy_plugins = true
 
 ; alternative return HTTP header for failed authentication. Default HTTP
 ; response is 401 HTTPUnauthorized. Currently HG clients have troubles with
 ; handling that causing a series of failed authentication calls.
 ; Set this variable to 403 to return HTTPForbidden, or any other HTTP code
 ; This will be served instead of default 401 on bad authentication
 auth_ret_code =
 
 ; use special detection method when serving auth_ret_code, instead of serving
 ; ret_code directly, use 401 initially (Which triggers credentials prompt)
 ; and then serve auth_ret_code to clients
 auth_ret_code_detection = false
 
 ; locking return code. When repository is locked return this HTTP code. 2XX
 ; codes don't break the transactions while 4XX codes do
 lock_ret_code = 423
 
 ; Filesystem location were repositories should be stored
 repo_store.path = /var/opt/rhodecode_repo_store
 
 ; allows to setup custom hooks in settings page
 allow_custom_hooks_settings = true
 
 ; Generated license token required for EE edition license.
 ; New generated token value can be found in Admin > settings > license page.
 license_token = abra-cada-bra1-rce3
 
 ; This flag hides sensitive information on the license page such as token, and license data
 license.hide_license_info = false
 
 ; supervisor connection uri, for managing supervisor and logs.
 supervisor.uri =
 
 ; supervisord group name/id we only want this RC instance to handle
 supervisor.group_id = dev
 
 ; Display extended labs settings
 labs_settings_active = true
 
 ; Custom exception store path, defaults to TMPDIR
 ; This is used to store exception from RhodeCode in shared directory
 #exception_tracker.store_path =
 
 ; Send email with exception details when it happens
 #exception_tracker.send_email = false
 
 ; Comma separated list of recipients for exception emails,
 ; e.g [e-mail],[e-mail]
 ; Can be left empty, then emails will be sent to ALL super-admins
 #exception_tracker.send_email_recipients =
 
 ; optional prefix to Add to email Subject
 #exception_tracker.email_prefix = [RHODECODE ERROR]
 
 ; File store configuration. This is used to store and serve uploaded files
 file_store.enabled = true
 
 ; Storage backend, available options are: local
 file_store.backend = local
 
 ; path to store the uploaded binaries and artifacts
 file_store.storage_path = /var/opt/rhodecode_data/file_store
 
 
 ; Redis url to acquire/check generation of archives locks
 archive_cache.locking.url = redis://redis:6379/1
 
 ; Storage backend, only 'filesystem' and 'objectstore' are available now
 archive_cache.backend.type = filesystem
 
 ; url for s3 compatible storage that allows to upload artifacts
 ; e.g http://minio:9000
 archive_cache.objectstore.url = http://s3-minio:9000
 
 ; key for s3 auth
 archive_cache.objectstore.key = key
 
 ; secret for s3 auth
 archive_cache.objectstore.secret = secret
 
 ; number of sharded buckets to create to distribute archives across
 ; default is 8 shards
 archive_cache.objectstore.bucket_shards = 8
 
+; a top-level bucket to put all other sharded buckets in
+; in case it's empty all buckets will be created in top-level (not recommended)
+; objects will be stored in rhodecode-archive-cache/shard-bucket-N based on the bucket_shards number
+archive_cache.objectstore.bucket_root = rhodecode-archive-cache
+
 ; if true, this cache will try to retry with retry_attempts=N times waiting retry_backoff time
 archive_cache.objectstore.retry = false
 
 ; number of seconds to wait for next try using retry
 archive_cache.objectstore.retry_backoff = 1
 
 ; how many tries do do a retry fetch from this backend
 archive_cache.objectstore.retry_attempts = 10
 
 ; Default is $cache_dir/archive_cache if not set
 ; Generated repo archives will be cached at this location
 ; and served from the cache during subsequent requests for the same archive of
 ; the repository. This path is important to be shared across filesystems and with
 ; RhodeCode and vcsserver
 archive_cache.filesystem.store_dir = %(here)s/rc-tests/archive_cache
 
 ; The limit in GB sets how much data we cache before recycling last used, defaults to 10 gb
 archive_cache.filesystem.cache_size_gb = 2
 
 ; Eviction policy used to clear out after cache_size_gb limit is reached
 archive_cache.filesystem.eviction_policy = least-recently-stored
 
 ; By default cache uses sharding technique, this specifies how many shards are there
 ; default is 8 shards
 archive_cache.filesystem.cache_shards = 8
 
 ; if true, this cache will try to retry with retry_attempts=N times waiting retry_backoff time
 archive_cache.filesystem.retry = false
 
 ; number of seconds to wait for next try using retry
 archive_cache.filesystem.retry_backoff = 1
 
 ; how many tries do do a retry fetch from this backend
 archive_cache.filesystem.retry_attempts = 10
 
 
 ; #############
 ; CELERY CONFIG
 ; #############
 
 ; manually run celery: /path/to/celery worker --task-events --beat --app rhodecode.lib.celerylib.loader --scheduler rhodecode.lib.celerylib.scheduler.RcScheduler --loglevel DEBUG --ini /path/to/rhodecode.ini
 
 use_celery = false
 
 ; path to store schedule database
 #celerybeat-schedule.path =
 
 ; connection url to the message broker (default redis)
 celery.broker_url = redis://redis:6379/8
 
 ; results backend to get results for (default redis)
 celery.result_backend = redis://redis:6379/8
 
 ; rabbitmq example
 #celery.broker_url = amqp://rabbitmq:qweqwe@localhost:5672/rabbitmqhost
 
 ; maximum tasks to execute before worker restart
 celery.max_tasks_per_child = 20
 
 ; tasks will never be sent to the queue, but executed locally instead.
 celery.task_always_eager = true
 celery.task_store_eager_result = true
 
 ; #############
 ; DOGPILE CACHE
 ; #############
 
 ; Default cache dir for caches. Putting this into a ramdisk can boost performance.
 ; eg. /tmpfs/data_ramdisk, however this directory might require large amount of space
 cache_dir = %(here)s/rc-test-data
 
 ; *********************************************
 ; `sql_cache_short` cache for heavy SQL queries
 ; Only supported backend is `memory_lru`
 ; *********************************************
 rc_cache.sql_cache_short.backend = dogpile.cache.rc.memory_lru
 rc_cache.sql_cache_short.expiration_time = 0
 
 
 ; *****************************************************
 ; `cache_repo_longterm` cache for repo object instances
 ; Only supported backend is `memory_lru`
 ; *****************************************************
 rc_cache.cache_repo_longterm.backend = dogpile.cache.rc.memory_lru
 ; by default we use 30 Days, cache is still invalidated on push
 rc_cache.cache_repo_longterm.expiration_time = 2592000
 ; max items in LRU cache, set to smaller number to save memory, and expire last used caches
 rc_cache.cache_repo_longterm.max_size = 10000
 
 
 ; *********************************************
 ; `cache_general` cache for general purpose use
 ; for simplicity use rc.file_namespace backend,
 ; for performance and scale use rc.redis
 ; *********************************************
 rc_cache.cache_general.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_general.expiration_time = 43200
 ; file cache store path. Defaults to `cache_dir =` value or tempdir if both values are not set
 rc_cache.cache_general.arguments.filename = %(here)s/rc-tests/cache-backend/cache_general_db
 
 ; alternative `cache_general` redis backend with distributed lock
 #rc_cache.cache_general.backend = dogpile.cache.rc.redis
 #rc_cache.cache_general.expiration_time = 300
 
 ; redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_general.arguments.redis_expiration_time = 7200
 
 #rc_cache.cache_general.arguments.host = localhost
 #rc_cache.cache_general.arguments.port = 6379
 #rc_cache.cache_general.arguments.db = 0
 #rc_cache.cache_general.arguments.socket_timeout = 30
 ; more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_general.arguments.distributed_lock = true
 
 ; auto-renew lock to prevent stale locks, slower but safer. Use only if problems happen
 #rc_cache.cache_general.arguments.lock_auto_renewal = true
 
 ; *************************************************
 ; `cache_perms` cache for permission tree, auth TTL
 ; for simplicity use rc.file_namespace backend,
 ; for performance and scale use rc.redis
 ; *************************************************
 rc_cache.cache_perms.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_perms.expiration_time = 0
 ; file cache store path. Defaults to `cache_dir =` value or tempdir if both values are not set
 rc_cache.cache_perms.arguments.filename = %(here)s/rc-tests/cache-backend/cache_perms_db
 
 ; alternative `cache_perms` redis backend with distributed lock
 #rc_cache.cache_perms.backend = dogpile.cache.rc.redis
 #rc_cache.cache_perms.expiration_time = 300
 
 ; redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_perms.arguments.redis_expiration_time = 7200
 
 #rc_cache.cache_perms.arguments.host = localhost
 #rc_cache.cache_perms.arguments.port = 6379
 #rc_cache.cache_perms.arguments.db = 0
 #rc_cache.cache_perms.arguments.socket_timeout = 30
 ; more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_perms.arguments.distributed_lock = true
 
 ; auto-renew lock to prevent stale locks, slower but safer. Use only if problems happen
 #rc_cache.cache_perms.arguments.lock_auto_renewal = true
 
 ; ***************************************************
 ; `cache_repo` cache for file tree, Readme, RSS FEEDS
 ; for simplicity use rc.file_namespace backend,
 ; for performance and scale use rc.redis
 ; ***************************************************
 rc_cache.cache_repo.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_repo.expiration_time = 2592000
 ; file cache store path. Defaults to `cache_dir =` value or tempdir if both values are not set
 rc_cache.cache_repo.arguments.filename = %(here)s/rc-tests/cache-backend/cache_repo_db
 
 ; alternative `cache_repo` redis backend with distributed lock
 #rc_cache.cache_repo.backend = dogpile.cache.rc.redis
 #rc_cache.cache_repo.expiration_time = 2592000
 
 ; redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_repo.arguments.redis_expiration_time = 2678400
 
 #rc_cache.cache_repo.arguments.host = localhost
 #rc_cache.cache_repo.arguments.port = 6379
 #rc_cache.cache_repo.arguments.db = 1
 #rc_cache.cache_repo.arguments.socket_timeout = 30
 ; more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_repo.arguments.distributed_lock = true
 
 ; auto-renew lock to prevent stale locks, slower but safer. Use only if problems happen
 #rc_cache.cache_repo.arguments.lock_auto_renewal = true
 
 ; ##############
 ; BEAKER SESSION
 ; ##############
 
 ; beaker.session.type is type of storage options for the logged users sessions. Current allowed
 ; types are file, ext:redis, ext:database, ext:memcached
 ; Fastest ones are ext:redis and ext:database, DO NOT use memory type for session
 beaker.session.type = file
 beaker.session.data_dir = %(here)s/rc-tests/data/sessions
 
 ; Redis based sessions
 #beaker.session.type = ext:redis
 #beaker.session.url = redis://redis:6379/2
 
 ; DB based session, fast, and allows easy management over logged in users
 #beaker.session.type = ext:database
 #beaker.session.table_name = db_session
 #beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.session.sa.pool_recycle = 3600
 #beaker.session.sa.echo = false
 
 beaker.session.key = rhodecode
 beaker.session.secret = test-rc-uytcxaz
 beaker.session.lock_dir = %(here)s/rc-tests/data/sessions/lock
 
 ; Secure encrypted cookie. Requires AES and AES python libraries
 ; you must disable beaker.session.secret to use this
 #beaker.session.encrypt_key = key_for_encryption
 #beaker.session.validate_key = validation_key
 
 ; Sets session as invalid (also logging out user) if it haven not been
 ; accessed for given amount of time in seconds
 beaker.session.timeout = 2592000
 beaker.session.httponly = true
 
 ; Path to use for the cookie. Set to prefix if you use prefix middleware
 #beaker.session.cookie_path = /custom_prefix
 
 ; Set https secure cookie
 beaker.session.secure = false
 
 ; default cookie expiration time in seconds, set to `true` to set expire
 ; at browser close
 #beaker.session.cookie_expires = 3600
 
 ; #############################
 ; SEARCH INDEXING CONFIGURATION
 ; #############################
 
 ; Full text search indexer is available in rhodecode-tools under
 ; `rhodecode-tools index` command
 
 ; WHOOSH Backend, doesn't require additional services to run
 ; it works good with few dozen repos
 search.module = rhodecode.lib.index.whoosh
 search.location = %(here)s/rc-tests/data/index
 
 ; ####################
 ; CHANNELSTREAM CONFIG
 ; ####################
 
 ; channelstream enables persistent connections and live notification
 ; in the system. It's also used by the chat system
 
 channelstream.enabled = false
 
 ; server address for channelstream server on the backend
 channelstream.server = channelstream:9800
 
 ; location of the channelstream server from outside world
 ; use ws:// for http or wss:// for https. This address needs to be handled
 ; by external HTTP server such as Nginx or Apache
 ; see Nginx/Apache configuration examples in our docs
 channelstream.ws_url = ws://rhodecode.yourserver.com/_channelstream
 channelstream.secret = ENV_GENERATED
 channelstream.history.location = %(here)s/rc-tests/channelstream_history
 
 ; Internal application path that Javascript uses to connect into.
 ; If you use proxy-prefix the prefix should be added before /_channelstream
 channelstream.proxy_path = /_channelstream
 
 
 ; ##############################
 ; MAIN RHODECODE DATABASE CONFIG
 ; ##############################
 
 #sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 #sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 #sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode?charset=utf8
 ; pymysql is an alternative driver for MySQL, use in case of problems with default one
 #sqlalchemy.db1.url = mysql+pymysql://root:qweqwe@localhost/rhodecode
 
 sqlalchemy.db1.url = sqlite:///%(here)s/rc-tests/rhodecode_test.db?timeout=30
 
 ; see sqlalchemy docs for other advanced settings
 ; print the sql statements to output
 sqlalchemy.db1.echo = false
 
 ; recycle the connections after this amount of seconds
 sqlalchemy.db1.pool_recycle = 3600
 
 ; the number of connections to keep open inside the connection pool.
 ; 0 indicates no limit
 ; the general calculus with gevent is:
 ; if your system allows 500 concurrent greenlets (max_connections) that all do database access,
 ; then increase pool size + max overflow so that they add up to 500.
 #sqlalchemy.db1.pool_size = 5
 
 ; The number of connections to allow in connection pool "overflow", that is
 ; connections that can be opened above and beyond the pool_size setting,
 ; which defaults to five.
 #sqlalchemy.db1.max_overflow = 10
 
 ; Connection check ping, used to detect broken database connections
 ; could be enabled to better handle cases if MySQL has gone away errors
 #sqlalchemy.db1.ping_connection = true
 
 ; ##########
 ; VCS CONFIG
 ; ##########
 vcs.server.enable = true
 vcs.server = vcsserver:10010
 
 ; Web server connectivity protocol, responsible for web based VCS operations
 ; Available protocols are:
 ; `http` - use http-rpc backend (default)
 vcs.server.protocol = http
 
 ; Push/Pull operations protocol, available options are:
 ; `http` - use http-rpc backend (default)
 vcs.scm_app_implementation = http
 
 ; Push/Pull operations hooks protocol, available options are:
 ; `http` - use http-rpc backend (default)
 ; `celery` - use celery based hooks
 vcs.hooks.protocol = http
 
 ; Host on which this instance is listening for hooks. vcsserver will call this host to pull/push hooks so it should be
 ; accessible via network.
 ; Use vcs.hooks.host = "*" to bind to current hostname (for Docker)
 vcs.hooks.host = *
 
 ; Start VCSServer with this instance as a subprocess, useful for development
 vcs.start_server = false
 
 ; List of enabled VCS backends, available options are:
 ; `hg`  - mercurial
 ; `git` - git
 ; `svn` - subversion
 vcs.backends = hg, git, svn
 
 ; Wait this number of seconds before killing connection to the vcsserver
 vcs.connection_timeout = 3600
 
 ; Cache flag to cache vcsserver remote calls locally
 ; It uses cache_region `cache_repo`
 vcs.methods.cache = false
 
 ; ####################################################
 ; Subversion proxy support (mod_dav_svn)
 ; Maps RhodeCode repo groups into SVN paths for Apache
 ; ####################################################
 
 ; Compatibility version when creating SVN repositories. Defaults to newest version when commented out.
 ; Set a numeric version for your current SVN e.g 1.8, or 1.12
 ; Legacy available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible, pre-1.9-compatible
 #vcs.svn.compatible_version = 1.8
 
 ; Enable SVN proxy of requests over HTTP
 vcs.svn.proxy.enabled = true
 
 ; host to connect to running SVN subsystem
 vcs.svn.proxy.host = http://svn:8090
 
 ; Enable or disable the config file generation.
 svn.proxy.generate_config = false
 
 ; Generate config file with `SVNListParentPath` set to `On`.
 svn.proxy.list_parent_path = true
 
 ; Set location and file name of generated config file.
 svn.proxy.config_file_path = %(here)s/rc-tests/mod_dav_svn.conf
 
 ; alternative mod_dav config template. This needs to be a valid mako template
 ; Example template can be found in the source code:
 ; rhodecode/apps/svn_support/templates/mod-dav-svn.conf.mako
 #svn.proxy.config_template = ~/.rccontrol/enterprise-1/custom_svn_conf.mako
 
 ; Used as a prefix to the `Location` block in the generated config file.
 ; In most cases it should be set to `/`.
 svn.proxy.location_root = /
 
 ; Command to reload the mod dav svn configuration on change.
 ; Example: `/etc/init.d/apache2 reload` or /home/USER/apache_reload.sh
 ; Make sure user who runs RhodeCode process is allowed to reload Apache
 #svn.proxy.reload_cmd = /etc/init.d/apache2 reload
 
 ; If the timeout expires before the reload command finishes, the command will
 ; be killed. Setting it to zero means no timeout. Defaults to 10 seconds.
 #svn.proxy.reload_timeout = 10
 
 ; ####################
 ; SSH Support Settings
 ; ####################
 
 ; Defines if a custom authorized_keys file should be created and written on
 ; any change user ssh keys. Setting this to false also disables possibility
 ; of adding SSH keys by users from web interface. Super admins can still
 ; manage SSH Keys.
 ssh.generate_authorized_keyfile = true
 
 ; Options for ssh, default is `no-pty,no-port-forwarding,no-X11-forwarding,no-agent-forwarding`
 # ssh.authorized_keys_ssh_opts =
 
 ; Path to the authorized_keys file where the generate entries are placed.
 ; It is possible to have multiple key files specified in `sshd_config` e.g.
 ; AuthorizedKeysFile %h/.ssh/authorized_keys %h/.ssh/authorized_keys_rhodecode
 ssh.authorized_keys_file_path = %(here)s/rc-tests/authorized_keys_rhodecode
 
 ; Command to execute the SSH wrapper. The binary is available in the
 ; RhodeCode installation directory.
 ; legacy: /usr/local/bin/rhodecode_bin/bin/rc-ssh-wrapper
 ; new rewrite: /usr/local/bin/rhodecode_bin/bin/rc-ssh-wrapper-v2
 ssh.wrapper_cmd = /usr/local/bin/rhodecode_bin/bin/rc-ssh-wrapper
 
 ; Allow shell when executing the ssh-wrapper command
 ssh.wrapper_cmd_allow_shell = false
 
 ; Enables logging, and detailed output send back to the client during SSH
 ; operations. Useful for debugging, shouldn't be used in production.
 ssh.enable_debug_logging = true
 
 ; Paths to binary executable, by default they are the names, but we can
 ; override them if we want to use a custom one
 ssh.executable.hg = /usr/local/bin/rhodecode_bin/vcs_bin/hg
 ssh.executable.git = /usr/local/bin/rhodecode_bin/vcs_bin/git
 ssh.executable.svn = /usr/local/bin/rhodecode_bin/vcs_bin/svnserve
 
 ; Enables SSH key generator web interface. Disabling this still allows users
 ; to add their own keys.
 ssh.enable_ui_key_generator = true
 
 ; Statsd client config, this is used to send metrics to statsd
 ; We recommend setting statsd_exported and scrape them using Prometheus
 #statsd.enabled = false
 #statsd.statsd_host = 0.0.0.0
 #statsd.statsd_port = 8125
 #statsd.statsd_prefix =
 #statsd.statsd_ipv6 = false
 
 ; configure logging automatically at server startup set to false
 ; to use the below custom logging config.
 ; RC_LOGGING_FORMATTER
 ; RC_LOGGING_LEVEL
 ; env variables can control the settings for logging in case of autoconfigure
 
 logging.autoconfigure = false
 
 ; specify your own custom logging config file to configure logging
 #logging.logging_conf_file = /path/to/custom_logging.ini
 
 ; Dummy marker to add new entries after.
 ; Add any custom entries below. Please don't remove this marker.
 custom.conf = 1
 
 
 ; #####################
 ; LOGGING CONFIGURATION
 ; #####################
 
 [loggers]
 keys = root, sqlalchemy, beaker, celery, rhodecode, ssh_wrapper, dogpile
 
 [handlers]
 keys = console, console_sql
 
 [formatters]
 keys = generic, json, color_formatter, color_formatter_sql
 
 ; #######
 ; LOGGERS
 ; #######
 [logger_root]
 level = NOTSET
 handlers = console
 
 [logger_routes]
 level = DEBUG
 handlers =
 qualname = routes.middleware
 ## "level = DEBUG" logs the route matched and routing variables.
 propagate = 1
 
 [logger_sqlalchemy]
 level = INFO
 handlers = console_sql
 qualname = sqlalchemy.engine
 propagate = 0
 
 [logger_beaker]
 level = DEBUG
 handlers =
 qualname = beaker.container
 propagate = 1
 
 [logger_dogpile]
 level = INFO
 handlers = console
 qualname = dogpile
 propagate = 1
 
 [logger_rhodecode]
 level = DEBUG
 handlers =
 qualname = rhodecode
 propagate = 1
 
 [logger_ssh_wrapper]
 level = DEBUG
 handlers =
 qualname = ssh_wrapper
 propagate = 1
 
 [logger_celery]
 level = DEBUG
 handlers =
 qualname = celery
 
 
 ; ########
 ; HANDLERS
 ; ########
 
 [handler_console]
 class = StreamHandler
 args = (sys.stderr, )
 level = DEBUG
 ; To enable JSON formatted logs replace 'generic/color_formatter' with 'json'
 ; This allows sending properly formatted logs to grafana loki or elasticsearch
 formatter = generic
 
 [handler_console_sql]
 ; "level = DEBUG" logs SQL queries and results.
 ; "level = INFO" logs SQL queries.
 ; "level = WARN" logs neither.  (Recommended for production systems.)
 class = StreamHandler
 args = (sys.stderr, )
 level = WARN
 ; To enable JSON formatted logs replace 'generic/color_formatter_sql' with 'json'
 ; This allows sending properly formatted logs to grafana loki or elasticsearch
 formatter = generic
 
 ; ##########
 ; FORMATTERS
 ; ##########
 
 [formatter_generic]
 class = rhodecode.lib.logging_formatter.ExceptionAwareFormatter
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter]
 class = rhodecode.lib.logging_formatter.ColorFormatter
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter_sql]
 class = rhodecode.lib.logging_formatter.ColorFormatterSql
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_json]
 format = %(timestamp)s %(levelname)s %(name)s %(message)s %(req_id)s
 class = rhodecode.lib._vendor.jsonlogger.JsonFormatter