docs: added tip for faster nix-shell by pre-installing phantomJS

docs/contributing/dev-setup.rst

@@ -1,226 +1,238 b''
 .. _dev-setup:
 
 ===================
  Development setup
 ===================
 
 
 RhodeCode Enterprise runs inside a Nix managed environment. This ensures build
 environment dependencies are correctly declared and installed during setup.
 It also enables atomic upgrades, rollbacks, and multiple instances of RhodeCode
 Enterprise running with isolation.
 
 To set up RhodeCode Enterprise inside the Nix environment, use the following steps:
 
 
 
 Setup Nix Package Manager
 -------------------------
 
 To install the Nix Package Manager, please run::
 
    $ curl https://nixos.org/nix/install | sh
 
 or go to https://nixos.org/nix/ and follow the installation instructions.
 Once this is correctly set up on your system, you should be able to use the
 following commands:
 
 * `nix-env`
 
 * `nix-shell`
 
 
 .. tip::
 
    Update your channels frequently by running ``nix-channel --update``.
 
 .. note::
 
    To uninstall nix run the following:
 
     remove the . "$HOME/.nix-profile/etc/profile.d/nix.sh" line in your ~/.profile or ~/.bash_profile
     rm -rf $HOME/{.nix-channels,.nix-defexpr,.nix-profile,.config/nixpkgs}
     sudo rm -rf /nix
 
 Switch nix to the latest STABLE channel
 ---------------------------------------
 
 run::
 
    nix-channel --add https://nixos.org/channels/nixos-18.03 nixpkgs
 
 Followed by::
 
    nix-channel --update
 
 
 Install required binaries
 -------------------------
 
 We need some handy tools first.
 
 run::
 
     nix-env -i nix-prefetch-hg
     nix-env -i nix-prefetch-git
 
 
+Speed up JS build by installing PhantomJS
+-----------------------------------------
+
+PhantomJS will be downloaded each time nix-shell is invoked. To speed this by
+setting already downloaded version do this::
+
+    nix-env -i phantomjs-2.1.1
+
+    # and set nix bin path
+    export PATH=$PATH:~/.nix-profile/bin
+
+
 Clone the required repositories
 -------------------------------
 
 After Nix is set up, clone the RhodeCode Enterprise Community Edition and
 RhodeCode VCSServer repositories into the same directory.
 RhodeCode currently is using Mercurial Version Control System, please make sure
 you have it installed before continuing.
 
 To obtain the required sources, use the following commands::
 
     mkdir rhodecode-develop && cd rhodecode-develop
     hg clone https://code.rhodecode.com/rhodecode-enterprise-ce
     hg clone https://code.rhodecode.com/rhodecode-vcsserver
 
 .. note::
 
    If you cannot clone the repository, please contact us via [e-mail]
 
 
 Install some required libraries
 -------------------------------
 
 There are some required drivers and dev libraries that we need to install to
 test RhodeCode under different types of databases. For example in Ubuntu we
 need to install the following.
 
 required libraries::
 
     sudo apt-get install libapr1-dev libaprutil1-dev
     sudo apt-get install libsvn-dev
     sudo apt-get install mysql-server libmysqlclient-dev
     sudo apt-get install postgresql postgresql-contrib libpq-dev
     sudo apt-get install libcurl4-openssl-dev
 
 
 Enter the Development Shell
 ---------------------------
 
 The final step is to start the development shells. To do this, run the
 following command from inside the cloned repository::
 
    #first, the vcsserver
    cd ~/rhodecode-vcsserver
    nix-shell
 
    # then enterprise sources
    cd ~/rhodecode-enterprise-ce
    nix-shell
 
 .. note::
 
    On the first run, this will take a while to download and optionally compile
    a few things. The following runs will be faster. The development shell works
    fine on both MacOS and Linux platforms.
 
 
 Create config.nix for development
 ---------------------------------
 
 In order to run proper tests and setup linking across projects, a config.nix
 file needs to be setup::
 
     # create config
     mkdir -p ~/.nixpkgs
     touch ~/.nixpkgs/config.nix
 
     # put the below content into the ~/.nixpkgs/config.nix file
     # adjusts, the path to where you cloned your repositories.
 
     {
       rc = {
        sources = {
         rhodecode-vcsserver = "/home/dev/rhodecode-vcsserver";
         rhodecode-enterprise-ce = "/home/dev/rhodecode-enterprise-ce";
         rhodecode-enterprise-ee = "/home/dev/rhodecode-enterprise-ee";
        };
       };
     }
 
 
 
 Creating a Development Configuration
 ------------------------------------
 
 To create a development environment for RhodeCode Enterprise,
 use the following steps:
 
 1. Create a copy of vcsserver config:
     `cp ~/rhodecode-vcsserver/configs/development.ini ~/rhodecode-vcsserver/configs/dev.ini`
 2. Create a copy of rhodocode config:
     `cp ~/rhodecode-enterprise-ce/configs/development.ini ~/rhodecode-enterprise-ce/configs/dev.ini`
 3. Adjust the configuration settings to your needs if needed.
 
 .. note::
 
   It is recommended to use the name `dev.ini` since it's included in .hgignore file.
 
 
 Setup the Development Database
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 To create a development database, use the following example. This is a one
 time operation executed from the nix-shell of rhodecode-enterprise-ce sources ::
 
     rc-setup-app dev.ini \
         --user=admin --password=secret \
         --email=[e-mail] \
         --repos=~/my_dev_repos
 
 
 Compile CSS and JavaScript
 ^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 To use the application's frontend and prepare it for production deployment,
 you will need to compile the CSS and JavaScript with Grunt.
 This is easily done from within the nix-shell using the following command::
 
     grunt
 
 When developing new features you will need to recompile following any
 changes made to the CSS or JavaScript files when developing the code::
 
     grunt watch
 
 This prepares the development (with comments/whitespace) versions of files.
 
 Start the Development Servers
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 From the rhodecode-vcsserver directory, start the development server in another
 nix-shell, using the following command::
 
       pserve configs/dev.ini
 
 In the adjacent nix-shell which you created for your development server, you may
 now start CE with the following command::
 
 
       pserve --reload configs/dev.ini
 
 .. note::
 
   `--reload` flag will automatically reload the server when source file changes.
 
 
 Run the Environment Tests
 ^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Please make sure that the tests are passing to verify that your environment is
 set up correctly. RhodeCode uses py.test to run tests.
 While your instance is running, start a new nix-shell and simply run
 ``make test`` to run the basic test suite.
 
 
 Need Help?
 ^^^^^^^^^^
 
 Join us on Slack via https://rhodecode.com/join or post questions in our
 Community Portal at https://community.rhodecode.com