config: Remove unsused setting 'full_stack' from ini files.

configs/development.ini

@@ -1,651 +1,649 b''
 ################################################################################
 ################################################################################
 # RhodeCode Enterprise - configuration file                                    #
 # Built-in functions and variables                                             #
 # The %(here)s variable will be replaced with the parent directory of this file#
 #                                                                              #
 ################################################################################
 
 [DEFAULT]
 debug = true
 ################################################################################
 ## Uncomment and replace with the email address which should receive          ##
 ## any error reports after an application crash                               ##
 ## Additionally these settings will be used by the RhodeCode mailing system   ##
 ################################################################################
 #email_to = admin@localhost
 #error_email_from = paste_error@localhost
 #app_email_from = rhodecode-noreply@localhost
 #error_message =
 #email_prefix = [RhodeCode]
 
 #smtp_server = mail.server.com
 #smtp_username =
 #smtp_password =
 #smtp_port =
 #smtp_use_tls = false
 #smtp_use_ssl = true
 ## Specify available auth parameters here (e.g. LOGIN PLAIN CRAM-MD5, etc.)
 #smtp_auth =
 
 [server:main]
 ## COMMON ##
 host = 127.0.0.1
 port = 5000
 
 ##################################
 ##     WAITRESS WSGI SERVER     ##
 ## Recommended for Development  ##
 ##################################
 use = egg:waitress#main
 ## number of worker threads
 threads = 5
 ## MAX BODY SIZE 100GB
 max_request_body_size = 107374182400
 ## Use poll instead of select, fixes file descriptors limits problems.
 ## May not work on old windows systems.
 asyncore_use_poll = true
 
 
 ##########################
 ## GUNICORN WSGI SERVER ##
 ##########################
 ## run with gunicorn --log-config <inifile.ini> --paste <inifile.ini>
 #use = egg:gunicorn#main
 ## Sets the number of process workers. You must set `instance_id = *`
 ## when this option is set to more than one worker, recommended
 ## value is (2 * NUMBER_OF_CPUS + 1), eg 2CPU = 5 workers
 ## The `instance_id = *` must be set in the [app:main] section below
 #workers = 2
 ## number of threads for each of the worker, must be set to 1 for gevent
 ## generally recommened to be at 1
 #threads = 1
 ## process name
 #proc_name = rhodecode
 ## type of worker class, one of sync, gevent
 ## recommended for bigger setup is using of of other than sync one
 #worker_class = sync
 ## The maximum number of simultaneous clients. Valid only for Gevent
 #worker_connections = 10
 ## max number of requests that worker will handle before being gracefully
 ## restarted, could prevent memory leaks
 #max_requests = 1000
 #max_requests_jitter = 30
 ## amount of time a worker can spend with handling a request before it
 ## gets killed and restarted. Set to 6hrs
 #timeout = 21600
 
 
 ## prefix middleware for RhodeCode, disables force_https flag.
 ## allows to set RhodeCode under a prefix in server.
 ## eg https://server.com/<prefix>. Enable `filter-with =` option below as well.
 #[filter:proxy-prefix]
 #use = egg:PasteDeploy#prefix
 #prefix = /<your-prefix>
 
 [app:main]
 use = egg:rhodecode-enterprise-ce
 ## enable proxy prefix middleware, defined below
 #filter-with = proxy-prefix
 
 # During development the we want to have the debug toolbar enabled
 pyramid.includes =
     pyramid_debugtoolbar
     rhodecode.utils.debugtoolbar
     rhodecode.lib.middleware.request_wrapper
 
 pyramid.reload_templates = true
 
 debugtoolbar.hosts = 0.0.0.0/0
 debugtoolbar.exclude_prefixes =
     /css
     /fonts
     /images
     /js
 
 ## RHODECODE PLUGINS ##
 rhodecode.includes =
     rhodecode.api
 
 
 # api prefix url
 rhodecode.api.url = /_admin/api
 
 
 ## END RHODECODE PLUGINS ##
 
 ## encryption key used to encrypt social plugin tokens,
 ## remote_urls with credentials etc, if not set it defaults to
 ## `beaker.session.secret`
 #rhodecode.encrypted_values.secret =
 
 ## decryption strict mode (enabled by default). It controls if decryption raises
 ## `SignatureVerificationError` in case of wrong key, or damaged encryption data.
 #rhodecode.encrypted_values.strict = false
 
-full_stack = true
-
 ## return gzipped responses from Rhodecode (static files/application)
 gzip_responses = true
 
 ## autogenerate javascript routes file on startup
 generate_js_files = false
 
 ## Optional Languages
 ## en(default), be, de, es, fr, it, ja, pl, pt, ru, zh
 lang = en
 
 ## perform a full repository scan on each server start, this should be
 ## set to false after first startup, to allow faster server restarts.
 startup.import_repos = false
 
 ## Uncomment and set this path to use archive download cache.
 ## Once enabled, generated archives will be cached at this location
 ## and served from the cache during subsequent requests for the same archive of
 ## the repository.
 #archive_cache_dir = /tmp/tarballcache
 
 ## change this to unique ID for security
 app_instance_uuid = rc-production
 
 ## cut off limit for large diffs (size in bytes)
 cut_off_limit_diff = 1024000
 cut_off_limit_file = 256000
 
 ## use cache version of scm repo everywhere
 vcs_full_cache = true
 
 ## force https in RhodeCode, fixes https redirects, assumes it's always https
 ## Normally this is controlled by proper http flags sent from http server
 force_https = false
 
 ## use Strict-Transport-Security headers
 use_htsts = false
 
 ## number of commits stats will parse on each iteration
 commit_parse_limit = 25
 
 ## git rev filter option, --all is the default filter, if you need to
 ## hide all refs in changelog switch this to --branches --tags
 git_rev_filter = --branches --tags
 
 # Set to true if your repos are exposed using the dumb protocol
 git_update_server_info = false
 
 ## RSS/ATOM feed options
 rss_cut_off_limit = 256000
 rss_items_per_page = 10
 rss_include_diff = false
 
 ## gist URL alias, used to create nicer urls for gist. This should be an
 ## url that does rewrites to _admin/gists/<gistid>.
 ## example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
 ## RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/<gistid>
 gist_alias_url =
 
 ## List of controllers (using glob pattern syntax) that AUTH TOKENS could be
 ## used for access.
 ## Adding ?auth_token = <token> to the url authenticates this request as if it
 ## came from the the logged in user who own this authentication token.
 ##
 ## Syntax is <ControllerClass>:<function_pattern>.
 ## To enable access to raw_files put `FilesController:raw`.
 ## To enable access to patches add `ChangesetController:changeset_patch`.
 ## The list should be "," separated and on a single line.
 ##
 ## Recommended controllers to enable:
 #    ChangesetController:changeset_patch,
 #    ChangesetController:changeset_raw,
 #    FilesController:raw,
 #    FilesController:archivefile,
 #    GistsController:*,
 api_access_controllers_whitelist =
 
 ## default encoding used to convert from and to unicode
 ## can be also a comma separated list of encoding in case of mixed encodings
 default_encoding = UTF-8
 
 ## instance-id prefix
 ## a prefix key for this instance used for cache invalidation when running
 ## multiple instances of rhodecode, make sure it's globally unique for
 ## all running rhodecode instances. Leave empty if you don't use it
 instance_id =
 
 ## Fallback authentication plugin. Set this to a plugin ID to force the usage
 ## of an authentication plugin also if it is disabled by it's settings.
 ## This could be useful if you are unable to log in to the system due to broken
 ## authentication settings. Then you can enable e.g. the internal rhodecode auth
 ## module to log in again and fix the settings.
 ##
 ## Available builtin plugin IDs (hash is part of the ID):
 ## egg:rhodecode-enterprise-ce#rhodecode
 ## egg:rhodecode-enterprise-ce#pam
 ## egg:rhodecode-enterprise-ce#ldap
 ## egg:rhodecode-enterprise-ce#jasig_cas
 ## egg:rhodecode-enterprise-ce#headers
 ## egg:rhodecode-enterprise-ce#crowd
 #rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode
 
 ## alternative return HTTP header for failed authentication. Default HTTP
 ## response is 401 HTTPUnauthorized. Currently HG clients have troubles with
 ## handling that causing a series of failed authentication calls.
 ## Set this variable to 403 to return HTTPForbidden, or any other HTTP code
 ## This will be served instead of default 401 on bad authnetication
 auth_ret_code =
 
 ## use special detection method when serving auth_ret_code, instead of serving
 ## ret_code directly, use 401 initially (Which triggers credentials prompt)
 ## and then serve auth_ret_code to clients
 auth_ret_code_detection = false
 
 ## locking return code. When repository is locked return this HTTP code. 2XX
 ## codes don't break the transactions while 4XX codes do
 lock_ret_code = 423
 
 ## allows to change the repository location in settings page
 allow_repo_location_change = true
 
 ## allows to setup custom hooks in settings page
 allow_custom_hooks_settings = true
 
 ## generated license token, goto license page in RhodeCode settings to obtain
 ## new token
 license_token =
 
 ## supervisor connection uri, for managing supervisor and logs.
 supervisor.uri =
 ## supervisord group name/id we only want this RC instance to handle
 supervisor.group_id = dev
 
 ## Display extended labs settings
 labs_settings_active = true
 
 ####################################
 ###        CELERY CONFIG        ####
 ####################################
 use_celery = false
 broker.host = localhost
 broker.vhost = rabbitmqhost
 broker.port = 5672
 broker.user = rabbitmq
 broker.password = qweqwe
 
 celery.imports = rhodecode.lib.celerylib.tasks
 
 celery.result.backend = amqp
 celery.result.dburi = amqp://
 celery.result.serialier = json
 
 #celery.send.task.error.emails = true
 #celery.amqp.task.result.expires = 18000
 
 celeryd.concurrency = 2
 #celeryd.log.file = celeryd.log
 celeryd.log.level = debug
 celeryd.max.tasks.per.child = 1
 
 ## tasks will never be sent to the queue, but executed locally instead.
 celery.always.eager = false
 
 ####################################
 ###         BEAKER CACHE        ####
 ####################################
 # default cache dir for templates.  Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk
 cache_dir = %(here)s/data
 
 ## locking and default file storage for Beaker. Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk/cache/beaker_data
 beaker.cache.data_dir = %(here)s/data/cache/beaker_data
 beaker.cache.lock_dir = %(here)s/data/cache/beaker_lock
 
 beaker.cache.regions = super_short_term, short_term, long_term, sql_cache_short, auth_plugins, repo_cache_long
 
 beaker.cache.super_short_term.type = memory
 beaker.cache.super_short_term.expire = 10
 beaker.cache.super_short_term.key_length = 256
 
 beaker.cache.short_term.type = memory
 beaker.cache.short_term.expire = 60
 beaker.cache.short_term.key_length = 256
 
 beaker.cache.long_term.type = memory
 beaker.cache.long_term.expire = 36000
 beaker.cache.long_term.key_length = 256
 
 beaker.cache.sql_cache_short.type = memory
 beaker.cache.sql_cache_short.expire = 10
 beaker.cache.sql_cache_short.key_length = 256
 
 ## default is memory cache, configure only if required
 ## using multi-node or multi-worker setup
 #beaker.cache.auth_plugins.type = ext:database
 #beaker.cache.auth_plugins.lock_dir = %(here)s/data/cache/auth_plugin_lock
 #beaker.cache.auth_plugins.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.cache.auth_plugins.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.cache.auth_plugins.sa.pool_recycle = 3600
 #beaker.cache.auth_plugins.sa.pool_size = 10
 #beaker.cache.auth_plugins.sa.max_overflow = 0
 
 beaker.cache.repo_cache_long.type = memorylru_base
 beaker.cache.repo_cache_long.max_items = 4096
 beaker.cache.repo_cache_long.expire = 2592000
 
 ## default is memorylru_base cache, configure only if required
 ## using multi-node or multi-worker setup
 #beaker.cache.repo_cache_long.type = ext:memcached
 #beaker.cache.repo_cache_long.url = localhost:11211
 #beaker.cache.repo_cache_long.expire = 1209600
 #beaker.cache.repo_cache_long.key_length = 256
 
 ####################################
 ###       BEAKER SESSION        ####
 ####################################
 
 ## .session.type is type of storage options for the session, current allowed
 ## types are file, ext:memcached, ext:database, and memory (default).
 beaker.session.type = file
 beaker.session.data_dir = %(here)s/data/sessions/data
 
 ## db based session, fast, and allows easy management over logged in users ##
 #beaker.session.type = ext:database
 #beaker.session.table_name = db_session
 #beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.session.sa.pool_recycle = 3600
 #beaker.session.sa.echo = false
 
 beaker.session.key = rhodecode
 beaker.session.secret = develop-rc-uytcxaz
 beaker.session.lock_dir = %(here)s/data/sessions/lock
 
 ## Secure encrypted cookie. Requires AES and AES python libraries
 ## you must disable beaker.session.secret to use this
 #beaker.session.encrypt_key = <key_for_encryption>
 #beaker.session.validate_key = <validation_key>
 
 ## sets session as invalid(also logging out user) if it haven not been
 ## accessed for given amount of time in seconds
 beaker.session.timeout = 2592000
 beaker.session.httponly = true
 #beaker.session.cookie_path = /<your-prefix>
 
 ## uncomment for https secure cookie
 beaker.session.secure = false
 
 ## auto save the session to not to use .save()
 beaker.session.auto = false
 
 ## default cookie expiration time in seconds, set to `true` to set expire
 ## at browser close
 #beaker.session.cookie_expires = 3600
 
 ###################################
 ## SEARCH INDEXING CONFIGURATION ##
 ###################################
 ## Full text search indexer is available in rhodecode-tools under
 ## `rhodecode-tools index` command
 
 # WHOOSH Backend, doesn't require additional services to run
 # it works good with few dozen repos
 search.module = rhodecode.lib.index.whoosh
 search.location = %(here)s/data/index
 
 ########################################
 ###    CHANNELSTREAM CONFIG         ####
 ########################################
 ## channelstream enables persistent connections and live notification
 ## in the system. It's also used by the chat system
 
 channelstream.enabled = true
 # location of channelstream server on the backend
 channelstream.server = 127.0.0.1:9800
 # location of the channelstream server from outside world
 channelstream.ws_url = ws://127.0.0.1:9800
 channelstream.secret = secret
 channelstream.history.location = %(here)s/channelstream_history
 
 
 ###################################
 ##       APPENLIGHT CONFIG       ##
 ###################################
 
 ## Appenlight is tailored to work with RhodeCode, see
 ## http://appenlight.com for details how to obtain an account
 
 ## appenlight integration enabled
 appenlight = false
 
 appenlight.server_url = https://api.appenlight.com
 appenlight.api_key = YOUR_API_KEY
 #appenlight.transport_config = https://api.appenlight.com?threaded=1&timeout=5
 
 # used for JS client
 appenlight.api_public_key = YOUR_API_PUBLIC_KEY
 
 ## TWEAK AMOUNT OF INFO SENT HERE
 
 ## enables 404 error logging (default False)
 appenlight.report_404 = false
 
 ## time in seconds after request is considered being slow (default 1)
 appenlight.slow_request_time = 1
 
 ## record slow requests in application
 ## (needs to be enabled for slow datastore recording and time tracking)
 appenlight.slow_requests = true
 
 ## enable hooking to application loggers
 appenlight.logging = true
 
 ## minimum log level for log capture
 appenlight.logging.level = WARNING
 
 ## send logs only from erroneous/slow requests
 ## (saves API quota for intensive logging)
 appenlight.logging_on_error = false
 
 ## list of additonal keywords that should be grabbed from environ object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always send following info:
 ## 'REMOTE_USER', 'REMOTE_ADDR', 'SERVER_NAME', 'CONTENT_TYPE' + all keys that
 ## start with HTTP* this list be extended with additional keywords here
 appenlight.environ_keys_whitelist =
 
 ## list of keywords that should be blanked from request object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always blank keys that contain following words
 ## 'password', 'passwd', 'pwd', 'auth_tkt', 'secret', 'csrf'
 ## this list be extended with additional keywords set here
 appenlight.request_keys_blacklist =
 
 ## list of namespaces that should be ignores when gathering log entries
 ## can be string with comma separated list of namespaces
 ## (by default the client ignores own entries: appenlight_client.client)
 appenlight.log_namespace_blacklist =
 
 
 ################################################################################
 ## WARNING: *THE LINE BELOW MUST BE UNCOMMENTED ON A PRODUCTION ENVIRONMENT*  ##
 ## Debug mode will enable the interactive debugging tool, allowing ANYONE to  ##
 ## execute malicious code after an exception is raised.                       ##
 ################################################################################
 #set debug = false
 
 
 ##############
 ## STYLING  ##
 ##############
 debug_style = true
 
 #########################################################
 ### DB CONFIGS - EACH DB WILL HAVE IT'S OWN CONFIG    ###
 #########################################################
 sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 #sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 #sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode
 
 # see sqlalchemy docs for other advanced settings
 
 ## print the sql statements to output
 sqlalchemy.db1.echo = false
 ## recycle the connections after this ammount of seconds
 sqlalchemy.db1.pool_recycle = 3600
 sqlalchemy.db1.convert_unicode = true
 
 ## the number of connections to keep open inside the connection pool.
 ## 0 indicates no limit
 #sqlalchemy.db1.pool_size = 5
 
 ## the number of connections to allow in connection pool "overflow", that is
 ## connections that can be opened above and beyond the pool_size setting,
 ## which defaults to five.
 #sqlalchemy.db1.max_overflow = 10
 
 
 ##################
 ### VCS CONFIG ###
 ##################
 vcs.server.enable = true
 vcs.server = localhost:9900
 
 ## Web server connectivity protocol, responsible for web based VCS operatations
 ## Available protocols are:
 ## `pyro4` - using pyro4 server
 ## `http` - using http-rpc backend
 vcs.server.protocol = http
 
 ## Push/Pull operations protocol, available options are:
 ## `pyro4` - using pyro4 server
 ## `rhodecode.lib.middleware.utils.scm_app_http` - Http based, recommended
 ## `vcsserver.scm_app` - internal app (EE only)
 vcs.scm_app_implementation = rhodecode.lib.middleware.utils.scm_app_http
 
 ## Push/Pull operations hooks protocol, available options are:
 ## `pyro4` - using pyro4 server
 ## `http` - using http-rpc backend
 vcs.hooks.protocol = http
 
 vcs.server.log_level = debug
 ## Start VCSServer with this instance as a subprocess, usefull for development
 vcs.start_server = true
 
 ## List of enabled VCS backends, available options are:
 ## `hg`  - mercurial
 ## `git` - git
 ## `svn` - subversion
 vcs.backends = hg, git, svn
 
 vcs.connection_timeout = 3600
 ## Compatibility version when creating SVN repositories. Defaults to newest version when commented out.
 ## Available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible
 #vcs.svn.compatible_version = pre-1.8-compatible
 
 
 ##############################################
 ### Subversion proxy support (mod_dav_svn) ###
 ##############################################
 ## Enable or disable the config file generation.
 svn.proxy.generate_config = false
 ## Generate config file with `SVNListParentPath` set to `On`.
 svn.proxy.list_parent_path = true
 ## Set location and file name of generated config file.
 svn.proxy.config_file_path = %(here)s/mod_dav_svn.conf
 ## File system path to the directory containing the repositories served by
 ## RhodeCode.
 svn.proxy.parent_path_root = /path/to/repo_store
 ## Used as a prefix to the <Location> block in the generated config file. In
 ## most cases it should be set to `/`.
 svn.proxy.location_root = /
 
 
 ################################
 ### LOGGING CONFIGURATION   ####
 ################################
 [loggers]
 keys = root, routes, rhodecode, sqlalchemy, beaker, pyro4, templates
 
 [handlers]
 keys = console, console_sql
 
 [formatters]
 keys = generic, color_formatter, color_formatter_sql
 
 #############
 ## LOGGERS ##
 #############
 [logger_root]
 level = NOTSET
 handlers = console
 
 [logger_routes]
 level = DEBUG
 handlers =
 qualname = routes.middleware
 ## "level = DEBUG" logs the route matched and routing variables.
 propagate = 1
 
 [logger_beaker]
 level = DEBUG
 handlers =
 qualname = beaker.container
 propagate = 1
 
 [logger_pyro4]
 level = DEBUG
 handlers =
 qualname = Pyro4
 propagate = 1
 
 [logger_templates]
 level = INFO
 handlers =
 qualname = pylons.templating
 propagate = 1
 
 [logger_rhodecode]
 level = DEBUG
 handlers =
 qualname = rhodecode
 propagate = 1
 
 [logger_sqlalchemy]
 level = INFO
 handlers = console_sql
 qualname = sqlalchemy.engine
 propagate = 0
 
 ##############
 ## HANDLERS ##
 ##############
 
 [handler_console]
 class = StreamHandler
 args = (sys.stderr,)
 level = DEBUG
 formatter = color_formatter
 
 [handler_console_sql]
 class = StreamHandler
 args = (sys.stderr,)
 level = DEBUG
 formatter = color_formatter_sql
 
 ################
 ## FORMATTERS ##
 ################
 
 [formatter_generic]
 class = rhodecode.lib.logging_formatter.Pyro4AwareFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter]
 class = rhodecode.lib.logging_formatter.ColorFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter_sql]
 class = rhodecode.lib.logging_formatter.ColorFormatterSql
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S

configs/production.ini

@@ -1,620 +1,618 b''
 ################################################################################
 ################################################################################
 # RhodeCode Enterprise - configuration file                                    #
 # Built-in functions and variables                                             #
 # The %(here)s variable will be replaced with the parent directory of this file#
 #                                                                              #
 ################################################################################
 
 [DEFAULT]
 debug = true
 ################################################################################
 ## Uncomment and replace with the email address which should receive          ##
 ## any error reports after an application crash                               ##
 ## Additionally these settings will be used by the RhodeCode mailing system   ##
 ################################################################################
 #email_to = admin@localhost
 #error_email_from = paste_error@localhost
 #app_email_from = rhodecode-noreply@localhost
 #error_message =
 #email_prefix = [RhodeCode]
 
 #smtp_server = mail.server.com
 #smtp_username =
 #smtp_password =
 #smtp_port =
 #smtp_use_tls = false
 #smtp_use_ssl = true
 ## Specify available auth parameters here (e.g. LOGIN PLAIN CRAM-MD5, etc.)
 #smtp_auth =
 
 [server:main]
 ## COMMON ##
 host = 127.0.0.1
 port = 5000
 
 ##################################
 ##     WAITRESS WSGI SERVER     ##
 ## Recommended for Development  ##
 ##################################
 #use = egg:waitress#main
 ## number of worker threads
 #threads = 5
 ## MAX BODY SIZE 100GB
 #max_request_body_size = 107374182400
 ## Use poll instead of select, fixes file descriptors limits problems.
 ## May not work on old windows systems.
 #asyncore_use_poll = true
 
 
 ##########################
 ## GUNICORN WSGI SERVER ##
 ##########################
 ## run with gunicorn --log-config <inifile.ini> --paste <inifile.ini>
 use = egg:gunicorn#main
 ## Sets the number of process workers. You must set `instance_id = *`
 ## when this option is set to more than one worker, recommended
 ## value is (2 * NUMBER_OF_CPUS + 1), eg 2CPU = 5 workers
 ## The `instance_id = *` must be set in the [app:main] section below
 workers = 2
 ## number of threads for each of the worker, must be set to 1 for gevent
 ## generally recommened to be at 1
 #threads = 1
 ## process name
 proc_name = rhodecode
 ## type of worker class, one of sync, gevent
 ## recommended for bigger setup is using of of other than sync one
 worker_class = sync
 ## The maximum number of simultaneous clients. Valid only for Gevent
 #worker_connections = 10
 ## max number of requests that worker will handle before being gracefully
 ## restarted, could prevent memory leaks
 max_requests = 1000
 max_requests_jitter = 30
 ## amount of time a worker can spend with handling a request before it
 ## gets killed and restarted. Set to 6hrs
 timeout = 21600
 
 
 ## prefix middleware for RhodeCode, disables force_https flag.
 ## allows to set RhodeCode under a prefix in server.
 ## eg https://server.com/<prefix>. Enable `filter-with =` option below as well.
 #[filter:proxy-prefix]
 #use = egg:PasteDeploy#prefix
 #prefix = /<your-prefix>
 
 [app:main]
 use = egg:rhodecode-enterprise-ce
 ## enable proxy prefix middleware, defined below
 #filter-with = proxy-prefix
 
 ## encryption key used to encrypt social plugin tokens,
 ## remote_urls with credentials etc, if not set it defaults to
 ## `beaker.session.secret`
 #rhodecode.encrypted_values.secret =
 
 ## decryption strict mode (enabled by default). It controls if decryption raises
 ## `SignatureVerificationError` in case of wrong key, or damaged encryption data.
 #rhodecode.encrypted_values.strict = false
 
-full_stack = true
-
 ## return gzipped responses from Rhodecode (static files/application)
 gzip_responses = true
 
 ## autogenerate javascript routes file on startup
 generate_js_files = false
 
 ## Optional Languages
 ## en(default), be, de, es, fr, it, ja, pl, pt, ru, zh
 lang = en
 
 ## perform a full repository scan on each server start, this should be
 ## set to false after first startup, to allow faster server restarts.
 startup.import_repos = false
 
 ## Uncomment and set this path to use archive download cache.
 ## Once enabled, generated archives will be cached at this location
 ## and served from the cache during subsequent requests for the same archive of
 ## the repository.
 #archive_cache_dir = /tmp/tarballcache
 
 ## change this to unique ID for security
 app_instance_uuid = rc-production
 
 ## cut off limit for large diffs (size in bytes)
 cut_off_limit_diff = 1024000
 cut_off_limit_file = 256000
 
 ## use cache version of scm repo everywhere
 vcs_full_cache = true
 
 ## force https in RhodeCode, fixes https redirects, assumes it's always https
 ## Normally this is controlled by proper http flags sent from http server
 force_https = false
 
 ## use Strict-Transport-Security headers
 use_htsts = false
 
 ## number of commits stats will parse on each iteration
 commit_parse_limit = 25
 
 ## git rev filter option, --all is the default filter, if you need to
 ## hide all refs in changelog switch this to --branches --tags
 git_rev_filter = --branches --tags
 
 # Set to true if your repos are exposed using the dumb protocol
 git_update_server_info = false
 
 ## RSS/ATOM feed options
 rss_cut_off_limit = 256000
 rss_items_per_page = 10
 rss_include_diff = false
 
 ## gist URL alias, used to create nicer urls for gist. This should be an
 ## url that does rewrites to _admin/gists/<gistid>.
 ## example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
 ## RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/<gistid>
 gist_alias_url =
 
 ## List of controllers (using glob pattern syntax) that AUTH TOKENS could be
 ## used for access.
 ## Adding ?auth_token = <token> to the url authenticates this request as if it
 ## came from the the logged in user who own this authentication token.
 ##
 ## Syntax is <ControllerClass>:<function_pattern>.
 ## To enable access to raw_files put `FilesController:raw`.
 ## To enable access to patches add `ChangesetController:changeset_patch`.
 ## The list should be "," separated and on a single line.
 ##
 ## Recommended controllers to enable:
 #    ChangesetController:changeset_patch,
 #    ChangesetController:changeset_raw,
 #    FilesController:raw,
 #    FilesController:archivefile,
 #    GistsController:*,
 api_access_controllers_whitelist =
 
 ## default encoding used to convert from and to unicode
 ## can be also a comma separated list of encoding in case of mixed encodings
 default_encoding = UTF-8
 
 ## instance-id prefix
 ## a prefix key for this instance used for cache invalidation when running
 ## multiple instances of rhodecode, make sure it's globally unique for
 ## all running rhodecode instances. Leave empty if you don't use it
 instance_id =
 
 ## Fallback authentication plugin. Set this to a plugin ID to force the usage
 ## of an authentication plugin also if it is disabled by it's settings.
 ## This could be useful if you are unable to log in to the system due to broken
 ## authentication settings. Then you can enable e.g. the internal rhodecode auth
 ## module to log in again and fix the settings.
 ##
 ## Available builtin plugin IDs (hash is part of the ID):
 ## egg:rhodecode-enterprise-ce#rhodecode
 ## egg:rhodecode-enterprise-ce#pam
 ## egg:rhodecode-enterprise-ce#ldap
 ## egg:rhodecode-enterprise-ce#jasig_cas
 ## egg:rhodecode-enterprise-ce#headers
 ## egg:rhodecode-enterprise-ce#crowd
 #rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode
 
 ## alternative return HTTP header for failed authentication. Default HTTP
 ## response is 401 HTTPUnauthorized. Currently HG clients have troubles with
 ## handling that causing a series of failed authentication calls.
 ## Set this variable to 403 to return HTTPForbidden, or any other HTTP code
 ## This will be served instead of default 401 on bad authnetication
 auth_ret_code =
 
 ## use special detection method when serving auth_ret_code, instead of serving
 ## ret_code directly, use 401 initially (Which triggers credentials prompt)
 ## and then serve auth_ret_code to clients
 auth_ret_code_detection = false
 
 ## locking return code. When repository is locked return this HTTP code. 2XX
 ## codes don't break the transactions while 4XX codes do
 lock_ret_code = 423
 
 ## allows to change the repository location in settings page
 allow_repo_location_change = true
 
 ## allows to setup custom hooks in settings page
 allow_custom_hooks_settings = true
 
 ## generated license token, goto license page in RhodeCode settings to obtain
 ## new token
 license_token =
 
 ## supervisor connection uri, for managing supervisor and logs.
 supervisor.uri =
 ## supervisord group name/id we only want this RC instance to handle
 supervisor.group_id = prod
 
 ## Display extended labs settings
 labs_settings_active = true
 
 ####################################
 ###        CELERY CONFIG        ####
 ####################################
 use_celery = false
 broker.host = localhost
 broker.vhost = rabbitmqhost
 broker.port = 5672
 broker.user = rabbitmq
 broker.password = qweqwe
 
 celery.imports = rhodecode.lib.celerylib.tasks
 
 celery.result.backend = amqp
 celery.result.dburi = amqp://
 celery.result.serialier = json
 
 #celery.send.task.error.emails = true
 #celery.amqp.task.result.expires = 18000
 
 celeryd.concurrency = 2
 #celeryd.log.file = celeryd.log
 celeryd.log.level = debug
 celeryd.max.tasks.per.child = 1
 
 ## tasks will never be sent to the queue, but executed locally instead.
 celery.always.eager = false
 
 ####################################
 ###         BEAKER CACHE        ####
 ####################################
 # default cache dir for templates.  Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk
 cache_dir = %(here)s/data
 
 ## locking and default file storage for Beaker. Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk/cache/beaker_data
 beaker.cache.data_dir = %(here)s/data/cache/beaker_data
 beaker.cache.lock_dir = %(here)s/data/cache/beaker_lock
 
 beaker.cache.regions = super_short_term, short_term, long_term, sql_cache_short, auth_plugins, repo_cache_long
 
 beaker.cache.super_short_term.type = memory
 beaker.cache.super_short_term.expire = 10
 beaker.cache.super_short_term.key_length = 256
 
 beaker.cache.short_term.type = memory
 beaker.cache.short_term.expire = 60
 beaker.cache.short_term.key_length = 256
 
 beaker.cache.long_term.type = memory
 beaker.cache.long_term.expire = 36000
 beaker.cache.long_term.key_length = 256
 
 beaker.cache.sql_cache_short.type = memory
 beaker.cache.sql_cache_short.expire = 10
 beaker.cache.sql_cache_short.key_length = 256
 
 ## default is memory cache, configure only if required
 ## using multi-node or multi-worker setup
 #beaker.cache.auth_plugins.type = ext:database
 #beaker.cache.auth_plugins.lock_dir = %(here)s/data/cache/auth_plugin_lock
 #beaker.cache.auth_plugins.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.cache.auth_plugins.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.cache.auth_plugins.sa.pool_recycle = 3600
 #beaker.cache.auth_plugins.sa.pool_size = 10
 #beaker.cache.auth_plugins.sa.max_overflow = 0
 
 beaker.cache.repo_cache_long.type = memorylru_base
 beaker.cache.repo_cache_long.max_items = 4096
 beaker.cache.repo_cache_long.expire = 2592000
 
 ## default is memorylru_base cache, configure only if required
 ## using multi-node or multi-worker setup
 #beaker.cache.repo_cache_long.type = ext:memcached
 #beaker.cache.repo_cache_long.url = localhost:11211
 #beaker.cache.repo_cache_long.expire = 1209600
 #beaker.cache.repo_cache_long.key_length = 256
 
 ####################################
 ###       BEAKER SESSION        ####
 ####################################
 
 ## .session.type is type of storage options for the session, current allowed
 ## types are file, ext:memcached, ext:database, and memory (default).
 beaker.session.type = file
 beaker.session.data_dir = %(here)s/data/sessions/data
 
 ## db based session, fast, and allows easy management over logged in users ##
 #beaker.session.type = ext:database
 #beaker.session.table_name = db_session
 #beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.session.sa.pool_recycle = 3600
 #beaker.session.sa.echo = false
 
 beaker.session.key = rhodecode
 beaker.session.secret = production-rc-uytcxaz
 beaker.session.lock_dir = %(here)s/data/sessions/lock
 
 ## Secure encrypted cookie. Requires AES and AES python libraries
 ## you must disable beaker.session.secret to use this
 #beaker.session.encrypt_key = <key_for_encryption>
 #beaker.session.validate_key = <validation_key>
 
 ## sets session as invalid(also logging out user) if it haven not been
 ## accessed for given amount of time in seconds
 beaker.session.timeout = 2592000
 beaker.session.httponly = true
 #beaker.session.cookie_path = /<your-prefix>
 
 ## uncomment for https secure cookie
 beaker.session.secure = false
 
 ## auto save the session to not to use .save()
 beaker.session.auto = false
 
 ## default cookie expiration time in seconds, set to `true` to set expire
 ## at browser close
 #beaker.session.cookie_expires = 3600
 
 ###################################
 ## SEARCH INDEXING CONFIGURATION ##
 ###################################
 ## Full text search indexer is available in rhodecode-tools under
 ## `rhodecode-tools index` command
 
 # WHOOSH Backend, doesn't require additional services to run
 # it works good with few dozen repos
 search.module = rhodecode.lib.index.whoosh
 search.location = %(here)s/data/index
 
 ########################################
 ###    CHANNELSTREAM CONFIG         ####
 ########################################
 ## channelstream enables persistent connections and live notification
 ## in the system. It's also used by the chat system
 
 channelstream.enabled = true
 # location of channelstream server on the backend
 channelstream.server = 127.0.0.1:9800
 # location of the channelstream server from outside world
 channelstream.ws_url = ws://127.0.0.1:9800
 channelstream.secret = secret
 channelstream.history.location = %(here)s/channelstream_history
 
 
 ###################################
 ##       APPENLIGHT CONFIG       ##
 ###################################
 
 ## Appenlight is tailored to work with RhodeCode, see
 ## http://appenlight.com for details how to obtain an account
 
 ## appenlight integration enabled
 appenlight = false
 
 appenlight.server_url = https://api.appenlight.com
 appenlight.api_key = YOUR_API_KEY
 #appenlight.transport_config = https://api.appenlight.com?threaded=1&timeout=5
 
 # used for JS client
 appenlight.api_public_key = YOUR_API_PUBLIC_KEY
 
 ## TWEAK AMOUNT OF INFO SENT HERE
 
 ## enables 404 error logging (default False)
 appenlight.report_404 = false
 
 ## time in seconds after request is considered being slow (default 1)
 appenlight.slow_request_time = 1
 
 ## record slow requests in application
 ## (needs to be enabled for slow datastore recording and time tracking)
 appenlight.slow_requests = true
 
 ## enable hooking to application loggers
 appenlight.logging = true
 
 ## minimum log level for log capture
 appenlight.logging.level = WARNING
 
 ## send logs only from erroneous/slow requests
 ## (saves API quota for intensive logging)
 appenlight.logging_on_error = false
 
 ## list of additonal keywords that should be grabbed from environ object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always send following info:
 ## 'REMOTE_USER', 'REMOTE_ADDR', 'SERVER_NAME', 'CONTENT_TYPE' + all keys that
 ## start with HTTP* this list be extended with additional keywords here
 appenlight.environ_keys_whitelist =
 
 ## list of keywords that should be blanked from request object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always blank keys that contain following words
 ## 'password', 'passwd', 'pwd', 'auth_tkt', 'secret', 'csrf'
 ## this list be extended with additional keywords set here
 appenlight.request_keys_blacklist =
 
 ## list of namespaces that should be ignores when gathering log entries
 ## can be string with comma separated list of namespaces
 ## (by default the client ignores own entries: appenlight_client.client)
 appenlight.log_namespace_blacklist =
 
 
 ################################################################################
 ## WARNING: *THE LINE BELOW MUST BE UNCOMMENTED ON A PRODUCTION ENVIRONMENT*  ##
 ## Debug mode will enable the interactive debugging tool, allowing ANYONE to  ##
 ## execute malicious code after an exception is raised.                       ##
 ################################################################################
 set debug = false
 
 
 #########################################################
 ### DB CONFIGS - EACH DB WILL HAVE IT'S OWN CONFIG    ###
 #########################################################
 #sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 #sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode
 
 # see sqlalchemy docs for other advanced settings
 
 ## print the sql statements to output
 sqlalchemy.db1.echo = false
 ## recycle the connections after this ammount of seconds
 sqlalchemy.db1.pool_recycle = 3600
 sqlalchemy.db1.convert_unicode = true
 
 ## the number of connections to keep open inside the connection pool.
 ## 0 indicates no limit
 #sqlalchemy.db1.pool_size = 5
 
 ## the number of connections to allow in connection pool "overflow", that is
 ## connections that can be opened above and beyond the pool_size setting,
 ## which defaults to five.
 #sqlalchemy.db1.max_overflow = 10
 
 
 ##################
 ### VCS CONFIG ###
 ##################
 vcs.server.enable = true
 vcs.server = localhost:9900
 
 ## Web server connectivity protocol, responsible for web based VCS operatations
 ## Available protocols are:
 ## `pyro4` - using pyro4 server
 ## `http` - using http-rpc backend
 #vcs.server.protocol = http
 
 ## Push/Pull operations protocol, available options are:
 ## `pyro4` - using pyro4 server
 ## `rhodecode.lib.middleware.utils.scm_app_http` - Http based, recommended
 ## `vcsserver.scm_app` - internal app (EE only)
 #vcs.scm_app_implementation = rhodecode.lib.middleware.utils.scm_app_http
 
 ## Push/Pull operations hooks protocol, available options are:
 ## `pyro4` - using pyro4 server
 ## `http` - using http-rpc backend
 #vcs.hooks.protocol = http
 
 vcs.server.log_level = info
 ## Start VCSServer with this instance as a subprocess, usefull for development
 vcs.start_server = false
 
 ## List of enabled VCS backends, available options are:
 ## `hg`  - mercurial
 ## `git` - git
 ## `svn` - subversion
 vcs.backends = hg, git, svn
 
 vcs.connection_timeout = 3600
 ## Compatibility version when creating SVN repositories. Defaults to newest version when commented out.
 ## Available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible
 #vcs.svn.compatible_version = pre-1.8-compatible
 
 
 ##############################################
 ### Subversion proxy support (mod_dav_svn) ###
 ##############################################
 ## Enable or disable the config file generation.
 svn.proxy.generate_config = false
 ## Generate config file with `SVNListParentPath` set to `On`.
 svn.proxy.list_parent_path = true
 ## Set location and file name of generated config file.
 svn.proxy.config_file_path = %(here)s/mod_dav_svn.conf
 ## File system path to the directory containing the repositories served by
 ## RhodeCode.
 svn.proxy.parent_path_root = /path/to/repo_store
 ## Used as a prefix to the <Location> block in the generated config file. In
 ## most cases it should be set to `/`.
 svn.proxy.location_root = /
 
 
 ################################
 ### LOGGING CONFIGURATION   ####
 ################################
 [loggers]
 keys = root, routes, rhodecode, sqlalchemy, beaker, pyro4, templates
 
 [handlers]
 keys = console, console_sql
 
 [formatters]
 keys = generic, color_formatter, color_formatter_sql
 
 #############
 ## LOGGERS ##
 #############
 [logger_root]
 level = NOTSET
 handlers = console
 
 [logger_routes]
 level = DEBUG
 handlers =
 qualname = routes.middleware
 ## "level = DEBUG" logs the route matched and routing variables.
 propagate = 1
 
 [logger_beaker]
 level = DEBUG
 handlers =
 qualname = beaker.container
 propagate = 1
 
 [logger_pyro4]
 level = DEBUG
 handlers =
 qualname = Pyro4
 propagate = 1
 
 [logger_templates]
 level = INFO
 handlers =
 qualname = pylons.templating
 propagate = 1
 
 [logger_rhodecode]
 level = DEBUG
 handlers =
 qualname = rhodecode
 propagate = 1
 
 [logger_sqlalchemy]
 level = INFO
 handlers = console_sql
 qualname = sqlalchemy.engine
 propagate = 0
 
 ##############
 ## HANDLERS ##
 ##############
 
 [handler_console]
 class = StreamHandler
 args = (sys.stderr,)
 level = INFO
 formatter = generic
 
 [handler_console_sql]
 class = StreamHandler
 args = (sys.stderr,)
 level = WARN
 formatter = generic
 
 ################
 ## FORMATTERS ##
 ################
 
 [formatter_generic]
 class = rhodecode.lib.logging_formatter.Pyro4AwareFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter]
 class = rhodecode.lib.logging_formatter.ColorFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter_sql]
 class = rhodecode.lib.logging_formatter.ColorFormatterSql
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S

test.ini

@@ -1,606 +1,603 b''
 ################################################################################
 ################################################################################
 # RhodeCode Enterprise - configuration file                                    #
 # Built-in functions and variables                                             #
 # The %(here)s variable will be replaced with the parent directory of this file#
 #                                                                              #
 ################################################################################
 
 [DEFAULT]
 debug = true
 pdebug = false
 ################################################################################
 ## Uncomment and replace with the email address which should receive          ##
 ## any error reports after an application crash                               ##
 ## Additionally these settings will be used by the RhodeCode mailing system   ##
 ################################################################################
 #email_to = admin@localhost
 #error_email_from = paste_error@localhost
 #app_email_from = rhodecode-noreply@localhost
 #error_message =
 #email_prefix = [RhodeCode]
 
 #smtp_server = mail.server.com
 #smtp_username =
 #smtp_password =
 #smtp_port =
 #smtp_use_tls = false
 #smtp_use_ssl = true
 ## Specify available auth parameters here (e.g. LOGIN PLAIN CRAM-MD5, etc.)
 #smtp_auth =
 
 [server:main]
 ## COMMON ##
 host = 0.0.0.0
 port = 5000
 
 ##########################
 ## WAITRESS WSGI SERVER ##
 ##########################
 use = egg:waitress#main
 ## number of worker threads
 threads = 5
 ## MAX BODY SIZE 100GB
 max_request_body_size = 107374182400
 ## Use poll instead of select, fixes file descriptors limits problems.
 ## May not work on old windows systems.
 asyncore_use_poll = true
 
 ## PASTE HTTP ##
 #use = egg:Paste#http
 ## nr of worker threads to spawn
 #threadpool_workers = 5
 ## max request before thread respawn
 #threadpool_max_requests = 10
 ## option to use threads of process
 #use_threadpool = true
 
 ##########################
 ## GUNICORN WSGI SERVER ##
 ##########################
 ## run with gunicorn --log-config <inifile.ini> --paste <inifile.ini>
 #use = egg:gunicorn#main
 ## Sets the number of process workers. You must set `instance_id = *`
 ## when this option is set to more than one worker, recommended
 ## value is (2 * NUMBER_OF_CPUS + 1), eg 2CPU = 5 workers
 ## The `instance_id = *` must be set in the [app:main] section below
 #workers = 1
 ## number of threads for each of the worker, must be set to 1 for gevent
 ## generally recommened to be at 1
 #threads = 1
 ## process name
 #proc_name = rhodecode
 ## type of worker class, one of sync, gevent
 ## recommended for bigger setup is using of of other than sync one
 #worker_class = sync
 ## max number of requests that worker will handle before being gracefully
 ## restarted, could prevent memory leaks
 #max_requests = 1000
 #max_requests_jitter = 30
 ## ammount of time a worker can spend with handling a request before it
 ## gets killed and restarted. Set to 6hrs
 #timeout = 21600
 
 ## UWSGI ##
 ## run with uwsgi --ini-paste-logged <inifile.ini>
 #[uwsgi]
 #socket = /tmp/uwsgi.sock
 #master = true
 #http = 127.0.0.1:5000
 
 ## set as deamon and redirect all output to file
 #daemonize = ./uwsgi_rhodecode.log
 
 ## master process PID
 #pidfile = ./uwsgi_rhodecode.pid
 
 ## stats server with workers statistics, use uwsgitop
 ## for monitoring, `uwsgitop 127.0.0.1:1717`
 #stats = 127.0.0.1:1717
 #memory-report = true
 
 ## log 5XX errors
 #log-5xx = true
 
 ## Set the socket listen queue size.
 #listen = 256
 
 ## Gracefully Reload workers after the specified amount of managed requests
 ## (avoid memory leaks).
 #max-requests = 1000
 
 ## enable large buffers
 #buffer-size=65535
 
 ## socket and http timeouts ##
 #http-timeout=3600
 #socket-timeout=3600
 
 ## Log requests slower than the specified number of milliseconds.
 #log-slow = 10
 
 ## Exit if no app can be loaded.
 #need-app = true
 
 ## Set lazy mode (load apps in workers instead of master).
 #lazy = true
 
 ## scaling ##
 ## set cheaper algorithm to use, if not set default will be used
 #cheaper-algo = spare
 
 ## minimum number of workers to keep at all times
 #cheaper = 1
 
 ## number of workers to spawn at startup
 #cheaper-initial = 1
 
 ## maximum number of workers that can be spawned
 #workers = 4
 
 ## how many workers should be spawned at a time
 #cheaper-step = 1
 
 ## prefix middleware for RhodeCode, disables force_https flag.
 ## allows to set RhodeCode under a prefix in server.
 ## eg https://server.com/<prefix>. Enable `filter-with =` option below as well.
 #[filter:proxy-prefix]
 #use = egg:PasteDeploy#prefix
 #prefix = /<your-prefix>
 
 [app:main]
 is_test = True
 use = egg:rhodecode-enterprise-ce
 ## enable proxy prefix middleware, defined below
 #filter-with = proxy-prefix
 
 rhodecode.includes = rhodecode.api
 
 # api prefix url
 rhodecode.api.url = /_admin/api
 
-
-full_stack = true
-
 ## Serve static files via RhodeCode, disable to serve them via HTTP server
 static_files = true
 
 ## Optional Languages
 ## en(default), be, de, es, fr, it, ja, pl, pt, ru, zh
 lang = en
 
 ## perform a full repository scan on each server start, this should be
 ## set to false after first startup, to allow faster server restarts.
 startup.import_repos = true
 
 ## Uncomment and set this path to use archive download cache.
 ## Once enabled, generated archives will be cached at this location
 ## and served from the cache during subsequent requests for the same archive of
 ## the repository.
 #archive_cache_dir = /tmp/tarballcache
 
 ## change this to unique ID for security
 app_instance_uuid = rc-production
 
 ## cut off limit for large diffs (size in bytes)
 cut_off_limit_diff = 1024000
 cut_off_limit_file = 256000
 
 ## use cache version of scm repo everywhere
 vcs_full_cache = false
 
 ## force https in RhodeCode, fixes https redirects, assumes it's always https
 ## Normally this is controlled by proper http flags sent from http server
 force_https = false
 
 ## use Strict-Transport-Security headers
 use_htsts = false
 
 ## number of commits stats will parse on each iteration
 commit_parse_limit = 25
 
 ## git rev filter option, --all is the default filter, if you need to
 ## hide all refs in changelog switch this to --branches --tags
 git_rev_filter = --all
 
 # Set to true if your repos are exposed using the dumb protocol
 git_update_server_info = false
 
 ## RSS/ATOM feed options
 rss_cut_off_limit = 256000
 rss_items_per_page = 10
 rss_include_diff = false
 
 ## gist URL alias, used to create nicer urls for gist. This should be an
 ## url that does rewrites to _admin/gists/<gistid>.
 ## example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
 ## RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/<gistid>
 gist_alias_url =
 
 ## List of controllers (using glob pattern syntax) that AUTH TOKENS could be
 ## used for access.
 ## Adding ?auth_token = <token> to the url authenticates this request as if it
 ## came from the the logged in user who own this authentication token.
 ##
 ## Syntax is <ControllerClass>:<function_pattern>.
 ## To enable access to raw_files put `FilesController:raw`.
 ## To enable access to patches add `ChangesetController:changeset_patch`.
 ## The list should be "," separated and on a single line.
 ##
 ## Recommended controllers to enable:
 #    ChangesetController:changeset_patch,
 #    ChangesetController:changeset_raw,
 #    FilesController:raw,
 #    FilesController:archivefile,
 #    GistsController:*,
 api_access_controllers_whitelist =
 
 ## default encoding used to convert from and to unicode
 ## can be also a comma separated list of encoding in case of mixed encodings
 default_encoding = UTF-8
 
 ## instance-id prefix
 ## a prefix key for this instance used for cache invalidation when running
 ## multiple instances of rhodecode, make sure it's globally unique for
 ## all running rhodecode instances. Leave empty if you don't use it
 instance_id =
 
 ## alternative return HTTP header for failed authentication. Default HTTP
 ## response is 401 HTTPUnauthorized. Currently HG clients have troubles with
 ## handling that causing a series of failed authentication calls.
 ## Set this variable to 403 to return HTTPForbidden, or any other HTTP code
 ## This will be served instead of default 401 on bad authnetication
 auth_ret_code =
 
 ## use special detection method when serving auth_ret_code, instead of serving
 ## ret_code directly, use 401 initially (Which triggers credentials prompt)
 ## and then serve auth_ret_code to clients
 auth_ret_code_detection = false
 
 ## locking return code. When repository is locked return this HTTP code. 2XX
 ## codes don't break the transactions while 4XX codes do
 lock_ret_code = 423
 
 ## allows to change the repository location in settings page
 allow_repo_location_change = true
 
 ## allows to setup custom hooks in settings page
 allow_custom_hooks_settings = true
 
 ## generated license token, goto license page in RhodeCode settings to obtain
 ## new token
 license_token = abra-cada-bra1-rce3
 
 ## supervisor connection uri, for managing supervisor and logs.
 supervisor.uri =
 ## supervisord group name/id we only want this RC instance to handle
 supervisor.group_id = dev
 
 ## Display extended labs settings
 labs_settings_active = true
 
 ####################################
 ###        CELERY CONFIG        ####
 ####################################
 use_celery = false
 broker.host = localhost
 broker.vhost = rabbitmqhost
 broker.port = 5672
 broker.user = rabbitmq
 broker.password = qweqwe
 
 celery.imports = rhodecode.lib.celerylib.tasks
 
 celery.result.backend = amqp
 celery.result.dburi = amqp://
 celery.result.serialier = json
 
 #celery.send.task.error.emails = true
 #celery.amqp.task.result.expires = 18000
 
 celeryd.concurrency = 2
 #celeryd.log.file = celeryd.log
 celeryd.log.level = debug
 celeryd.max.tasks.per.child = 1
 
 ## tasks will never be sent to the queue, but executed locally instead.
 celery.always.eager = false
 
 ####################################
 ###         BEAKER CACHE        ####
 ####################################
 # default cache dir for templates.  Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk
 cache_dir = %(here)s/data
 
 ## locking and default file storage for Beaker. Putting this into a ramdisk
 ## can boost performance, eg. %(here)s/data_ramdisk/cache/beaker_data
 beaker.cache.data_dir = %(here)s/rc/data/cache/beaker_data
 beaker.cache.lock_dir = %(here)s/rc/data/cache/beaker_lock
 
 beaker.cache.regions = super_short_term, short_term, long_term, sql_cache_short, auth_plugins, repo_cache_long
 
 beaker.cache.super_short_term.type = memory
 beaker.cache.super_short_term.expire = 1
 beaker.cache.super_short_term.key_length = 256
 
 beaker.cache.short_term.type = memory
 beaker.cache.short_term.expire = 60
 beaker.cache.short_term.key_length = 256
 
 beaker.cache.long_term.type = memory
 beaker.cache.long_term.expire = 36000
 beaker.cache.long_term.key_length = 256
 
 beaker.cache.sql_cache_short.type = memory
 beaker.cache.sql_cache_short.expire = 1
 beaker.cache.sql_cache_short.key_length = 256
 
 # default is memory cache, configure only if required
 # using multi-node or multi-worker setup
 #beaker.cache.auth_plugins.type = ext:database
 #beaker.cache.auth_plugins.lock_dir = %(here)s/data/cache/auth_plugin_lock
 #beaker.cache.auth_plugins.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.cache.auth_plugins.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.cache.auth_plugins.sa.pool_recycle = 3600
 #beaker.cache.auth_plugins.sa.pool_size = 10
 #beaker.cache.auth_plugins.sa.max_overflow = 0
 
 beaker.cache.repo_cache_long.type = memorylru_base
 beaker.cache.repo_cache_long.max_items = 4096
 beaker.cache.repo_cache_long.expire = 2592000
 
 # default is memorylru_base cache, configure only if required
 # using multi-node or multi-worker setup
 #beaker.cache.repo_cache_long.type = ext:memcached
 #beaker.cache.repo_cache_long.url = localhost:11211
 #beaker.cache.repo_cache_long.expire = 1209600
 #beaker.cache.repo_cache_long.key_length = 256
 
 ####################################
 ###       BEAKER SESSION        ####
 ####################################
 
 ## .session.type is type of storage options for the session, current allowed
 ## types are file(default), ext:memcached, ext:database, and memory.
 #beaker.session.type = file
 
 ## db based session, fast, and allows easy management over logged in users ##
 #beaker.session.type = ext:database
 #beaker.session.lock_dir = %(here)s/data/cache/session_db_lock
 #beaker.session.table_name = db_session
 #beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.session.sa.pool_recycle = 3600
 #beaker.session.sa.echo = false
 
 beaker.session.key = rhodecode
 beaker.session.secret = test-rc-uytcxaz
 
 ## Secure encrypted cookie. Requires AES and AES python libraries
 ## you must disable beaker.session.secret to use this
 #beaker.session.encrypt_key = <key_for_encryption>
 #beaker.session.validate_key = <validation_key>
 
 ## sets session as invalid(also logging out user) if it haven not been
 ## accessed for given amount of time in seconds
 beaker.session.timeout = 2592000
 beaker.session.httponly = true
 #beaker.session.cookie_path = /<your-prefix>
 
 ## uncomment for https secure cookie
 beaker.session.secure = false
 
 ## auto save the session to not to use .save()
 beaker.session.auto = false
 
 ## default cookie expiration time in seconds, set to `true` to set expire
 ## at browser close
 #beaker.session.cookie_expires = 3600
 
 ###################################
 ## SEARCH INDEXING CONFIGURATION ##
 ###################################
 
 search.module = rhodecode.lib.index.whoosh
 search.location = %(here)s/data/index
 
 ###################################
 ## ERROR AND LOG HANDLING SYSTEM ##
 ###################################
 
 ## Appenlight is tailored to work with RhodeCode, see
 ## http://appenlight.com for details how to obtain an account
 
 ## appenlight integration enabled
 appenlight = false
 
 appenlight.server_url = https://api.appenlight.com
 appenlight.api_key = YOUR_API_KEY
 ;appenlight.transport_config = https://api.appenlight.com?threaded=1&timeout=5
 
 # used for JS client
 appenlight.api_public_key = YOUR_API_PUBLIC_KEY
 
 ## TWEAK AMOUNT OF INFO SENT HERE
 
 ## enables 404 error logging (default False)
 appenlight.report_404 = false
 
 ## time in seconds after request is considered being slow (default 1)
 appenlight.slow_request_time = 1
 
 ## record slow requests in application
 ## (needs to be enabled for slow datastore recording and time tracking)
 appenlight.slow_requests = true
 
 ## enable hooking to application loggers
 appenlight.logging = true
 
 ## minimum log level for log capture
 appenlight.logging.level = WARNING
 
 ## send logs only from erroneous/slow requests
 ## (saves API quota for intensive logging)
 appenlight.logging_on_error = false
 
 ## list of additonal keywords that should be grabbed from environ object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always send following info:
 ## 'REMOTE_USER', 'REMOTE_ADDR', 'SERVER_NAME', 'CONTENT_TYPE' + all keys that
 ## start with HTTP* this list be extended with additional keywords here
 appenlight.environ_keys_whitelist =
 
 ## list of keywords that should be blanked from request object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always blank keys that contain following words
 ## 'password', 'passwd', 'pwd', 'auth_tkt', 'secret', 'csrf'
 ## this list be extended with additional keywords set here
 appenlight.request_keys_blacklist =
 
 ## list of namespaces that should be ignores when gathering log entries
 ## can be string with comma separated list of namespaces
 ## (by default the client ignores own entries: appenlight_client.client)
 appenlight.log_namespace_blacklist =
 
 
 ################################################################################
 ## WARNING: *THE LINE BELOW MUST BE UNCOMMENTED ON A PRODUCTION ENVIRONMENT*  ##
 ## Debug mode will enable the interactive debugging tool, allowing ANYONE to  ##
 ## execute malicious code after an exception is raised.                       ##
 ################################################################################
 set debug = false
 
 
 ##############
 ## STYLING  ##
 ##############
 debug_style = false
 
 #########################################################
 ### DB CONFIGS - EACH DB WILL HAVE IT'S OWN CONFIG    ###
 #########################################################
 sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode_test.db
 #sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode_test
 #sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode_test
 
 # see sqlalchemy docs for other advanced settings
 
 ## print the sql statements to output
 sqlalchemy.db1.echo = false
 ## recycle the connections after this ammount of seconds
 sqlalchemy.db1.pool_recycle = 3600
 sqlalchemy.db1.convert_unicode = true
 
 ## the number of connections to keep open inside the connection pool.
 ## 0 indicates no limit
 #sqlalchemy.db1.pool_size = 5
 
 ## the number of connections to allow in connection pool "overflow", that is
 ## connections that can be opened above and beyond the pool_size setting,
 ## which defaults to five.
 #sqlalchemy.db1.max_overflow = 10
 
 
 ##################
 ### VCS CONFIG ###
 ##################
 vcs.server.enable = true
 vcs.server = localhost:9901
 # Available protocols: pyro4, http
 vcs.server.protocol = pyro4
 vcs.server.log_level = info
 vcs.start_server = false
 vcs.backends = hg, git, svn
 vcs.connection_timeout = 3600
 
 ################################
 ### LOGGING CONFIGURATION   ####
 ################################
 [loggers]
 keys = root, routes, rhodecode, sqlalchemy, beaker, pyro4, templates
 
 [handlers]
 keys = console, console_sql
 
 [formatters]
 keys = generic, color_formatter, color_formatter_sql
 
 #############
 ## LOGGERS ##
 #############
 [logger_root]
 level = DEBUG
 handlers = console
 
 [logger_routes]
 level = DEBUG
 handlers =
 qualname = routes.middleware
 ## "level = DEBUG" logs the route matched and routing variables.
 propagate = 1
 
 [logger_beaker]
 level = DEBUG
 handlers =
 qualname = beaker.container
 propagate = 1
 
 [logger_pyro4]
 level = DEBUG
 handlers =
 qualname = Pyro4
 propagate = 1
 
 [logger_templates]
 level = INFO
 handlers =
 qualname = pylons.templating
 propagate = 1
 
 [logger_rhodecode]
 level = DEBUG
 handlers =
 qualname = rhodecode
 propagate = 1
 
 [logger_sqlalchemy]
 level = ERROR
 handlers = console_sql
 qualname = sqlalchemy.engine
 propagate = 0
 
 ##############
 ## HANDLERS ##
 ##############
 
 [handler_console]
 class = StreamHandler
 args = (sys.stderr,)
 level = INFO
 formatter = generic
 
 [handler_console_sql]
 class = StreamHandler
 args = (sys.stderr,)
 level = WARN
 formatter = generic
 
 ################
 ## FORMATTERS ##
 ################
 
 [formatter_generic]
 class = rhodecode.lib.logging_formatter.Pyro4AwareFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter]
 class = rhodecode.lib.logging_formatter.ColorFormatter
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter_sql]
 class = rhodecode.lib.logging_formatter.ColorFormatterSql
 format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S