gunicorn: moved loglevel control to .ini file

configs/development.ini

@@ -1,782 +1,785 b''
 
 
 ################################################################################
 ##                RHODECODE COMMUNITY  EDITION CONFIGURATION                  ##
 ################################################################################
 
 [DEFAULT]
 ## Debug flag sets all loggers to debug, and enables request tracking
 debug = true
 
 ################################################################################
 ##                            EMAIL CONFIGURATION                             ##
 ## Uncomment and replace with the email address which should receive          ##
 ## any error reports after an application crash                               ##
 ## Additionally these settings will be used by the RhodeCode mailing system   ##
 ################################################################################
 
 ## prefix all emails subjects with given prefix, helps filtering out emails
 #email_prefix = [RhodeCode]
 
 ## email FROM address all mails will be sent
 #app_email_from = rhodecode-noreply@localhost
 
 #smtp_server = mail.server.com
 #smtp_username =
 #smtp_password =
 #smtp_port =
 #smtp_use_tls = false
 #smtp_use_ssl = true
 
 [server:main]
 ## COMMON ##
 host = 127.0.0.1
 port = 5000
 
 ###########################################################
 ## WAITRESS WSGI SERVER - Recommended for Development  ####
 ###########################################################
 
 use = egg:waitress#main
 ## number of worker threads
 threads = 5
 ## MAX BODY SIZE 100GB
 max_request_body_size = 107374182400
 ## Use poll instead of select, fixes file descriptors limits problems.
 ## May not work on old windows systems.
 asyncore_use_poll = true
 
 
 ##########################
 ## GUNICORN WSGI SERVER ##
 ##########################
 ## run with gunicorn --log-config rhodecode.ini --paste rhodecode.ini
 
 #use = egg:gunicorn#main
 ## Sets the number of process workers. More workers means more concurrent connections
 ## RhodeCode can handle at the same time. Each additional worker also it increases
 ## memory usage as each has it's own set of caches.
 ## Recommended value is (2 * NUMBER_OF_CPUS + 1), eg 2CPU = 5 workers, but no more
 ## than 8-10 unless for really big deployments .e.g 700-1000 users.
 ## `instance_id = *` must be set in the [app:main] section below (which is the default)
 ## when using more than 1 worker.
 #workers = 2
 
+## Gunicorn access log level
+#loglevel = info
+
 ## process name visible in process list
 #proc_name = rhodecode
 
 ## type of worker class, one of sync, gevent
 ## recommended for bigger setup is using of of other than sync one
 #worker_class = gevent
 
 ## The maximum number of simultaneous clients. Valid only for Gevent
 #worker_connections = 10
 
 ## max number of requests that worker will handle before being gracefully
 ## restarted, could prevent memory leaks
 #max_requests = 1000
 #max_requests_jitter = 30
 
 ## amount of time a worker can spend with handling a request before it
 ## gets killed and restarted. Set to 6hrs
 #timeout = 21600
 
 ## The maximum size of HTTP request line in bytes.
 ## 0 for unlimited
 #limit_request_line = 0
 
 ## Limit the number of HTTP headers fields in a request.
 ## By default this value is 100 and can't be larger than 32768.
 #limit_request_fields = 32768
 
 ## Limit the allowed size of an HTTP request header field.
 ## Value is a positive number or 0.
 ## Setting it to 0 will allow unlimited header field sizes.
 #limit_request_field_size = 0
 
 ## Timeout for graceful workers restart.
 ## After receiving a restart signal, workers have this much time to finish
 ## serving requests. Workers still alive after the timeout (starting from the
 ## receipt of the restart signal) are force killed.
 #graceful_timeout = 3600
 
 # The number of seconds to wait for requests on a Keep-Alive connection.
 # Generally set in the 1-5 seconds range.
 #keepalive = 2
 
 ## Maximum memory usage that each worker can use before it will receive a
 ## graceful restart signal, e.g 10MB = 10485760 (10 * 1024 * 1024)
 # 0 = memory monitoring is disabled
 #memory_max_usage = 0
 
 ## How often in seconds to check for memory usage for each gunicorn worker
 #memory_usage_check_interval = 60
 
 ## Threshold value for which we don't recycle worker if GarbageCollection
 ## frees up enough resources. Before each restart we try to run GC on worker
 ## in case we get enough free memory after that, restart will not happen.
 #memory_usage_recovery_threshold = 0.8
 
 ## prefix middleware for RhodeCode.
 ## recommended when using proxy setup.
 ## allows to set RhodeCode under a prefix in server.
 ## eg https://server.com/custom_prefix. Enable `filter-with =` option below as well.
 ## And set your prefix like: `prefix = /custom_prefix`
 ## be sure to also set beaker.session.cookie_path = /custom_prefix if you need
 ## to make your cookies only work on prefix url
 [filter:proxy-prefix]
 use = egg:PasteDeploy#prefix
 prefix = /
 
 [app:main]
 ## The %(here)s variable will be replaced with the absolute path of parent directory
 ## of this file
 ## In addition ENVIRONMENT variables usage is possible, e.g
 ## sqlalchemy.db1.url = {ENV_RC_DB_URL}
 
 use = egg:rhodecode-enterprise-ce
 
 ## enable proxy prefix middleware, defined above
 #filter-with = proxy-prefix
 
 # During development the we want to have the debug toolbar enabled
 pyramid.includes =
     pyramid_debugtoolbar
     rhodecode.lib.middleware.request_wrapper
 
 pyramid.reload_templates = true
 
 debugtoolbar.hosts = 0.0.0.0/0
 debugtoolbar.exclude_prefixes =
     /css
     /fonts
     /images
     /js
 
 ## RHODECODE PLUGINS ##
 rhodecode.includes =
     rhodecode.api
 
 
 # api prefix url
 rhodecode.api.url = /_admin/api
 
 
 ## END RHODECODE PLUGINS ##
 
 ## encryption key used to encrypt social plugin tokens,
 ## remote_urls with credentials etc, if not set it defaults to
 ## `beaker.session.secret`
 #rhodecode.encrypted_values.secret =
 
 ## decryption strict mode (enabled by default). It controls if decryption raises
 ## `SignatureVerificationError` in case of wrong key, or damaged encryption data.
 #rhodecode.encrypted_values.strict = false
 
 ## Pick algorithm for encryption. Either fernet (more secure) or aes (default)
 ## fernet is safer, and we strongly recommend switching to it.
 ## Due to backward compatibility aes is used as default.
 #rhodecode.encrypted_values.algorithm = fernet
 
 ## return gzipped responses from RhodeCode (static files/application)
 gzip_responses = false
 
 ## auto-generate javascript routes file on startup
 generate_js_files = false
 
 ## System global default language.
 ## All available languages: en(default), be, de, es, fr, it, ja, pl, pt, ru, zh
 lang = en
 
 ## Perform a full repository scan and import on each server start.
 ## Settings this to true could lead to very long startup time.
 startup.import_repos = false
 
 ## Uncomment and set this path to use archive download cache.
 ## Once enabled, generated archives will be cached at this location
 ## and served from the cache during subsequent requests for the same archive of
 ## the repository.
 #archive_cache_dir = /tmp/tarballcache
 
 ## URL at which the application is running. This is used for Bootstrapping
 ## requests in context when no web request is available. Used in ishell, or
 ## SSH calls. Set this for events to receive proper url for SSH calls.
 app.base_url = http://rhodecode.local
 
 ## Unique application ID. Should be a random unique string for security.
 app_instance_uuid = rc-production
 
 ## Cut off limit for large diffs (size in bytes). If overall diff size on
 ## commit, or pull request exceeds this limit this diff will be displayed
 ## partially. E.g 512000 == 512Kb
 cut_off_limit_diff = 512000
 
 ## Cut off limit for large files inside diffs (size in bytes). Each individual
 ## file inside diff which exceeds this limit will be displayed partially.
 ##  E.g 128000 == 128Kb
 cut_off_limit_file = 128000
 
 ## use cached version of vcs repositories everywhere. Recommended to be `true`
 vcs_full_cache = true
 
 ## Force https in RhodeCode, fixes https redirects, assumes it's always https.
 ## Normally this is controlled by proper http flags sent from http server
 force_https = false
 
 ## use Strict-Transport-Security headers
 use_htsts = false
 
 # Set to true if your repos are exposed using the dumb protocol
 git_update_server_info = false
 
 ## RSS/ATOM feed options
 rss_cut_off_limit = 256000
 rss_items_per_page = 10
 rss_include_diff = false
 
 ## gist URL alias, used to create nicer urls for gist. This should be an
 ## url that does rewrites to _admin/gists/{gistid}.
 ## example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
 ## RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/{gistid}
 gist_alias_url =
 
 ## List of views (using glob pattern syntax) that AUTH TOKENS could be
 ## used for access.
 ## Adding ?auth_token=TOKEN_HASH to the url authenticates this request as if it
 ## came from the the logged in user who own this authentication token.
 ## Additionally @TOKEN syntax can be used to bound the view to specific
 ## authentication token. Such view would be only accessible when used together
 ## with this authentication token
 ##
 ## list of all views can be found under `/_admin/permissions/auth_token_access`
 ## The list should be "," separated and on a single line.
 ##
 ## Most common views to enable:
 #    RepoCommitsView:repo_commit_download
 #    RepoCommitsView:repo_commit_patch
 #    RepoCommitsView:repo_commit_raw
 #    RepoCommitsView:repo_commit_raw@TOKEN
 #    RepoFilesView:repo_files_diff
 #    RepoFilesView:repo_archivefile
 #    RepoFilesView:repo_file_raw
 #    GistView:*
 api_access_controllers_whitelist =
 
 ## Default encoding used to convert from and to unicode
 ## can be also a comma separated list of encoding in case of mixed encodings
 default_encoding = UTF-8
 
 ## instance-id prefix
 ## a prefix key for this instance used for cache invalidation when running
 ## multiple instances of RhodeCode, make sure it's globally unique for
 ## all running RhodeCode instances. Leave empty if you don't use it
 instance_id =
 
 ## Fallback authentication plugin. Set this to a plugin ID to force the usage
 ## of an authentication plugin also if it is disabled by it's settings.
 ## This could be useful if you are unable to log in to the system due to broken
 ## authentication settings. Then you can enable e.g. the internal RhodeCode auth
 ## module to log in again and fix the settings.
 ##
 ## Available builtin plugin IDs (hash is part of the ID):
 ## egg:rhodecode-enterprise-ce#rhodecode
 ## egg:rhodecode-enterprise-ce#pam
 ## egg:rhodecode-enterprise-ce#ldap
 ## egg:rhodecode-enterprise-ce#jasig_cas
 ## egg:rhodecode-enterprise-ce#headers
 ## egg:rhodecode-enterprise-ce#crowd
 #rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode
 
 ## alternative return HTTP header for failed authentication. Default HTTP
 ## response is 401 HTTPUnauthorized. Currently HG clients have troubles with
 ## handling that causing a series of failed authentication calls.
 ## Set this variable to 403 to return HTTPForbidden, or any other HTTP code
 ## This will be served instead of default 401 on bad authentication
 auth_ret_code =
 
 ## use special detection method when serving auth_ret_code, instead of serving
 ## ret_code directly, use 401 initially (Which triggers credentials prompt)
 ## and then serve auth_ret_code to clients
 auth_ret_code_detection = false
 
 ## locking return code. When repository is locked return this HTTP code. 2XX
 ## codes don't break the transactions while 4XX codes do
 lock_ret_code = 423
 
 ## allows to change the repository location in settings page
 allow_repo_location_change = true
 
 ## allows to setup custom hooks in settings page
 allow_custom_hooks_settings = true
 
 ## Generated license token required for EE edition license.
 ## New generated token value can be found in Admin > settings > license page.
 license_token =
 
 ## This flag would hide sensitive information on the license page
 license.hide_license_info = false
 
 ## supervisor connection uri, for managing supervisor and logs.
 supervisor.uri =
 ## supervisord group name/id we only want this RC instance to handle
 supervisor.group_id = dev
 
 ## Display extended labs settings
 labs_settings_active = true
 
 ## Custom exception store path, defaults to TMPDIR
 ## This is used to store exception from RhodeCode in shared directory
 #exception_tracker.store_path =
 
 ## File store configuration. This is used to store and serve uploaded files
 file_store.enabled = true
 ## Storage backend, available options are: local
 file_store.backend = local
 ## path to store the uploaded binaries
 file_store.storage_path = %(here)s/data/file_store
 
 
 ####################################
 ###        CELERY CONFIG        ####
 ####################################
 ## run: /path/to/celery worker \
 ##     -E --beat --app rhodecode.lib.celerylib.loader \
 ##     --scheduler rhodecode.lib.celerylib.scheduler.RcScheduler \
 ##     --loglevel DEBUG --ini /path/to/rhodecode.ini
 
 use_celery = false
 
 ## connection url to the message broker (default redis)
 celery.broker_url = redis://localhost:6379/8
 
 ## rabbitmq example
 #celery.broker_url = amqp://rabbitmq:qweqwe@localhost:5672/rabbitmqhost
 
 ## maximum tasks to execute before worker restart
 celery.max_tasks_per_child = 100
 
 ## tasks will never be sent to the queue, but executed locally instead.
 celery.task_always_eager = false
 
 #####################################
 ###         DOGPILE CACHE        ####
 #####################################
 ## Default cache dir for caches.  Putting this into a ramdisk
 ## can boost performance, eg. /tmpfs/data_ramdisk, however this directory might require
 ## large amount of space
 cache_dir = %(here)s/data
 
 ## `cache_perms` cache settings for permission tree, auth TTL.
 rc_cache.cache_perms.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_perms.expiration_time = 300
 
 ## alternative `cache_perms` redis backend with distributed lock
 #rc_cache.cache_perms.backend = dogpile.cache.rc.redis
 #rc_cache.cache_perms.expiration_time = 300
 ## redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_perms.arguments.redis_expiration_time = 7200
 #rc_cache.cache_perms.arguments.socket_timeout = 30
 #rc_cache.cache_perms.arguments.host = localhost
 #rc_cache.cache_perms.arguments.port = 6379
 #rc_cache.cache_perms.arguments.db = 0
 ## more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_perms.arguments.distributed_lock = true
 
 ## `cache_repo` cache settings for FileTree, Readme, RSS FEEDS
 rc_cache.cache_repo.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_repo.expiration_time = 2592000
 
 ## alternative `cache_repo` redis backend with distributed lock
 #rc_cache.cache_repo.backend = dogpile.cache.rc.redis
 #rc_cache.cache_repo.expiration_time = 2592000
 ## redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_repo.arguments.redis_expiration_time = 2678400
 #rc_cache.cache_repo.arguments.socket_timeout = 30
 #rc_cache.cache_repo.arguments.host = localhost
 #rc_cache.cache_repo.arguments.port = 6379
 #rc_cache.cache_repo.arguments.db = 1
 ## more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_repo.arguments.distributed_lock = true
 
 ## cache settings for SQL queries, this needs to use memory type backend
 rc_cache.sql_cache_short.backend = dogpile.cache.rc.memory_lru
 rc_cache.sql_cache_short.expiration_time = 30
 
 ## `cache_repo_longterm` cache for repo object instances, this needs to use memory
 ## type backend as the objects kept are not pickle serializable
 rc_cache.cache_repo_longterm.backend = dogpile.cache.rc.memory_lru
 ## by default we use 96H, this is using invalidation on push anyway
 rc_cache.cache_repo_longterm.expiration_time = 345600
 ## max items in LRU cache, reduce this number to save memory, and expire last used
 ## cached objects
 rc_cache.cache_repo_longterm.max_size = 10000
 
 
 ####################################
 ###       BEAKER SESSION        ####
 ####################################
 
 ## .session.type is type of storage options for the session, current allowed
 ## types are file, ext:memcached, ext:redis, ext:database, and memory (default).
 beaker.session.type = file
 beaker.session.data_dir = %(here)s/data/sessions
 
 ## redis sessions
 #beaker.session.type = ext:redis
 #beaker.session.url = redis://127.0.0.1:6379/2
 
 ## db based session, fast, and allows easy management over logged in users
 #beaker.session.type = ext:database
 #beaker.session.table_name = db_session
 #beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.session.sa.pool_recycle = 3600
 #beaker.session.sa.echo = false
 
 beaker.session.key = rhodecode
 beaker.session.secret = develop-rc-uytcxaz
 beaker.session.lock_dir = %(here)s/data/sessions/lock
 
 ## Secure encrypted cookie. Requires AES and AES python libraries
 ## you must disable beaker.session.secret to use this
 #beaker.session.encrypt_key = key_for_encryption
 #beaker.session.validate_key = validation_key
 
 ## sets session as invalid(also logging out user) if it haven not been
 ## accessed for given amount of time in seconds
 beaker.session.timeout = 2592000
 beaker.session.httponly = true
 ## Path to use for the cookie. Set to prefix if you use prefix middleware
 #beaker.session.cookie_path = /custom_prefix
 
 ## uncomment for https secure cookie
 beaker.session.secure = false
 
 ## auto save the session to not to use .save()
 beaker.session.auto = false
 
 ## default cookie expiration time in seconds, set to `true` to set expire
 ## at browser close
 #beaker.session.cookie_expires = 3600
 
 ###################################
 ## SEARCH INDEXING CONFIGURATION ##
 ###################################
 ## Full text search indexer is available in rhodecode-tools under
 ## `rhodecode-tools index` command
 
 ## WHOOSH Backend, doesn't require additional services to run
 ## it works good with few dozen repos
 search.module = rhodecode.lib.index.whoosh
 search.location = %(here)s/data/index
 
 ########################################
 ###    CHANNELSTREAM CONFIG         ####
 ########################################
 ## channelstream enables persistent connections and live notification
 ## in the system. It's also used by the chat system
 
 channelstream.enabled = false
 
 ## server address for channelstream server on the backend
 channelstream.server = 127.0.0.1:9800
 
 ## location of the channelstream server from outside world
 ## use ws:// for http or wss:// for https. This address needs to be handled
 ## by external HTTP server such as Nginx or Apache
 ## see Nginx/Apache configuration examples in our docs
 channelstream.ws_url = ws://rhodecode.yourserver.com/_channelstream
 channelstream.secret = secret
 channelstream.history.location = %(here)s/channelstream_history
 
 ## Internal application path that Javascript uses to connect into.
 ## If you use proxy-prefix the prefix should be added before /_channelstream
 channelstream.proxy_path = /_channelstream
 
 
 ###################################
 ##       APPENLIGHT CONFIG       ##
 ###################################
 
 ## Appenlight is tailored to work with RhodeCode, see
 ## http://appenlight.com for details how to obtain an account
 
 ## Appenlight integration enabled
 appenlight = false
 
 appenlight.server_url = https://api.appenlight.com
 appenlight.api_key = YOUR_API_KEY
 #appenlight.transport_config = https://api.appenlight.com?threaded=1&timeout=5
 
 ## used for JS client
 appenlight.api_public_key = YOUR_API_PUBLIC_KEY
 
 ## TWEAK AMOUNT OF INFO SENT HERE
 
 ## enables 404 error logging (default False)
 appenlight.report_404 = false
 
 ## time in seconds after request is considered being slow (default 1)
 appenlight.slow_request_time = 1
 
 ## record slow requests in application
 ## (needs to be enabled for slow datastore recording and time tracking)
 appenlight.slow_requests = true
 
 ## enable hooking to application loggers
 appenlight.logging = true
 
 ## minimum log level for log capture
 appenlight.logging.level = WARNING
 
 ## send logs only from erroneous/slow requests
 ## (saves API quota for intensive logging)
 appenlight.logging_on_error = false
 
 ## list of additional keywords that should be grabbed from environ object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always send following info:
 ## 'REMOTE_USER', 'REMOTE_ADDR', 'SERVER_NAME', 'CONTENT_TYPE' + all keys that
 ## start with HTTP* this list be extended with additional keywords here
 appenlight.environ_keys_whitelist =
 
 ## list of keywords that should be blanked from request object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always blank keys that contain following words
 ## 'password', 'passwd', 'pwd', 'auth_tkt', 'secret', 'csrf'
 ## this list be extended with additional keywords set here
 appenlight.request_keys_blacklist =
 
 ## list of namespaces that should be ignores when gathering log entries
 ## can be string with comma separated list of namespaces
 ## (by default the client ignores own entries: appenlight_client.client)
 appenlight.log_namespace_blacklist =
 
 # enable debug style page
 debug_style = true
 
 ###########################################
 ###   MAIN RHODECODE DATABASE CONFIG    ###
 ###########################################
 #sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 #sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 #sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode?charset=utf8
 # pymysql is an alternative driver for MySQL, use in case of problems with default one
 #sqlalchemy.db1.url = mysql+pymysql://root:qweqwe@localhost/rhodecode
 
 sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 
 # see sqlalchemy docs for other advanced settings
 
 ## print the sql statements to output
 sqlalchemy.db1.echo = false
 ## recycle the connections after this amount of seconds
 sqlalchemy.db1.pool_recycle = 3600
 
 ## the number of connections to keep open inside the connection pool.
 ## 0 indicates no limit
 #sqlalchemy.db1.pool_size = 5
 
 ## the number of connections to allow in connection pool "overflow", that is
 ## connections that can be opened above and beyond the pool_size setting,
 ## which defaults to five.
 #sqlalchemy.db1.max_overflow = 10
 
 ## Connection check ping, used to detect broken database connections
 ## could be enabled to better handle cases if MySQL has gone away errors
 #sqlalchemy.db1.ping_connection = true
 
 ##################
 ### VCS CONFIG ###
 ##################
 vcs.server.enable = true
 vcs.server = localhost:9900
 
 ## Web server connectivity protocol, responsible for web based VCS operations
 ## Available protocols are:
 ## `http` - use http-rpc backend (default)
 vcs.server.protocol = http
 
 ## Push/Pull operations protocol, available options are:
 ## `http` - use http-rpc backend (default)
 vcs.scm_app_implementation = http
 
 ## Push/Pull operations hooks protocol, available options are:
 ## `http` - use http-rpc backend (default)
 vcs.hooks.protocol = http
 
 ## Host on which this instance is listening for hooks. If vcsserver is in other location
 ## this should be adjusted.
 vcs.hooks.host = 127.0.0.1
 
 vcs.server.log_level = debug
 ## Start VCSServer with this instance as a subprocess, useful for development
 vcs.start_server = false
 
 ## List of enabled VCS backends, available options are:
 ## `hg`  - mercurial
 ## `git` - git
 ## `svn` - subversion
 vcs.backends = hg, git, svn
 
 vcs.connection_timeout = 3600
 ## Compatibility version when creating SVN repositories. Defaults to newest version when commented out.
 ## Available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible, pre-1.9-compatible
 #vcs.svn.compatible_version = pre-1.8-compatible
 
 
 ############################################################
 ### Subversion proxy support (mod_dav_svn)               ###
 ### Maps RhodeCode repo groups into SVN paths for Apache ###
 ############################################################
 ## Enable or disable the config file generation.
 svn.proxy.generate_config = false
 ## Generate config file with `SVNListParentPath` set to `On`.
 svn.proxy.list_parent_path = true
 ## Set location and file name of generated config file.
 svn.proxy.config_file_path = %(here)s/mod_dav_svn.conf
 ## alternative mod_dav config template. This needs to be a mako template
 #svn.proxy.config_template = ~/.rccontrol/enterprise-1/custom_svn_conf.mako
 ## Used as a prefix to the `Location` block in the generated config file.
 ## In most cases it should be set to `/`.
 svn.proxy.location_root = /
 ## Command to reload the mod dav svn configuration on change.
 ## Example: `/etc/init.d/apache2 reload` or /home/USER/apache_reload.sh
 ## Make sure user who runs RhodeCode process is allowed to reload Apache
 #svn.proxy.reload_cmd = /etc/init.d/apache2 reload
 ## If the timeout expires before the reload command finishes, the command will
 ## be killed. Setting it to zero means no timeout. Defaults to 10 seconds.
 #svn.proxy.reload_timeout = 10
 
 ############################################################
 ### SSH Support Settings                                 ###
 ############################################################
 
 ## Defines if a custom authorized_keys file should be created and written on
 ## any change user ssh keys. Setting this to false also disables possibility
 ## of adding SSH keys by users from web interface. Super admins can still
 ## manage SSH Keys.
 ssh.generate_authorized_keyfile = false
 
 ## Options for ssh, default is `no-pty,no-port-forwarding,no-X11-forwarding,no-agent-forwarding`
 # ssh.authorized_keys_ssh_opts =
 
 ## Path to the authorized_keys file where the generate entries are placed.
 ## It is possible to have multiple key files specified in `sshd_config` e.g.
 ## AuthorizedKeysFile %h/.ssh/authorized_keys %h/.ssh/authorized_keys_rhodecode
 ssh.authorized_keys_file_path = ~/.ssh/authorized_keys_rhodecode
 
 ## Command to execute the SSH wrapper. The binary is available in the
 ## RhodeCode installation directory.
 ## e.g ~/.rccontrol/community-1/profile/bin/rc-ssh-wrapper
 ssh.wrapper_cmd = ~/.rccontrol/community-1/rc-ssh-wrapper
 
 ## Allow shell when executing the ssh-wrapper command
 ssh.wrapper_cmd_allow_shell = false
 
 ## Enables logging, and detailed output send back to the client during SSH
 ## operations. Useful for debugging, shouldn't be used in production.
 ssh.enable_debug_logging = true
 
 ## Paths to binary executable, by default they are the names, but we can
 ## override them if we want to use a custom one
 ssh.executable.hg = ~/.rccontrol/vcsserver-1/profile/bin/hg
 ssh.executable.git = ~/.rccontrol/vcsserver-1/profile/bin/git
 ssh.executable.svn = ~/.rccontrol/vcsserver-1/profile/bin/svnserve
 
 ## Enables SSH key generator web interface. Disabling this still allows users
 ## to add their own keys.
 ssh.enable_ui_key_generator = true
 
 
 ## Dummy marker to add new entries after.
 ## Add any custom entries below. Please don't remove.
 custom.conf = 1
 
 
 ################################
 ### LOGGING CONFIGURATION   ####
 ################################
 [loggers]
 keys = root, sqlalchemy, beaker, celery, rhodecode, ssh_wrapper
 
 [handlers]
 keys = console, console_sql
 
 [formatters]
 keys = generic, color_formatter, color_formatter_sql
 
 #############
 ## LOGGERS ##
 #############
 [logger_root]
 level = NOTSET
 handlers = console
 
 [logger_sqlalchemy]
 level = INFO
 handlers = console_sql
 qualname = sqlalchemy.engine
 propagate = 0
 
 [logger_beaker]
 level = DEBUG
 handlers =
 qualname = beaker.container
 propagate = 1
 
 [logger_rhodecode]
 level = DEBUG
 handlers =
 qualname = rhodecode
 propagate = 1
 
 [logger_ssh_wrapper]
 level = DEBUG
 handlers =
 qualname = ssh_wrapper
 propagate = 1
 
 [logger_celery]
 level = DEBUG
 handlers =
 qualname = celery
 
 
 ##############
 ## HANDLERS ##
 ##############
 
 [handler_console]
 class = StreamHandler
 args = (sys.stderr, )
 level = DEBUG
 formatter = color_formatter
 
 [handler_console_sql]
 # "level = DEBUG" logs SQL queries and results.
 # "level = INFO" logs SQL queries.
 # "level = WARN" logs neither.  (Recommended for production systems.)
 class = StreamHandler
 args = (sys.stderr, )
 level = WARN
 formatter = color_formatter_sql
 
 ################
 ## FORMATTERS ##
 ################
 
 [formatter_generic]
 class = rhodecode.lib.logging_formatter.ExceptionAwareFormatter
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter]
 class = rhodecode.lib.logging_formatter.ColorFormatter
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter_sql]
 class = rhodecode.lib.logging_formatter.ColorFormatterSql
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S

configs/gunicorn_config.py

@@ -1,271 +1,270 b''
 """
 gunicorn config extension and hooks. Sets additional configuration that is
 available post the .ini config.
 
 - workers = ${cpu_number}
 - threads = 1
 - proc_name = ${gunicorn_proc_name}
 - worker_class = sync
 - worker_connections = 10
 - max_requests = 1000
 - max_requests_jitter = 30
 - timeout = 21600
 
 """
 
 import gc
 import os
 import sys
 import math
 import time
 import threading
 import traceback
 import random
 from gunicorn.glogging import Logger
 
 
 def get_workers():
     import multiprocessing
     return multiprocessing.cpu_count() * 2 + 1
 
 # GLOBAL
 errorlog = '-'
 accesslog = '-'
-loglevel = 'info'
 
 
 # SERVER MECHANICS
 # None == system temp dir
 # worker_tmp_dir is recommended to be set to some tmpfs
 worker_tmp_dir = None
 tmp_upload_dir = None
 
 # Custom log format
 access_log_format = (
     '%(t)s %(p)s INFO  [GNCRN] %(h)-15s rqt:%(L)s %(s)s %(b)-6s "%(m)s:%(U)s %(q)s" usr:%(u)s "%(f)s" "%(a)s"')
 
 # self adjust workers based on CPU count
 # workers = get_workers()
 
 
 def _get_process_rss(pid=None):
     try:
         import psutil
         if pid:
             proc = psutil.Process(pid)
         else:
             proc = psutil.Process()
         return proc.memory_info().rss
     except Exception:
         return None
 
 
 def _get_config(ini_path):
 
     try:
         import configparser
     except ImportError:
         import ConfigParser as configparser
     try:
         config = configparser.ConfigParser()
         config.read(ini_path)
         return config
     except Exception:
         return None
 
 
 def _time_with_offset(memory_usage_check_interval):
     return time.time() - random.randint(0, memory_usage_check_interval/2.0)
 
 
 def pre_fork(server, worker):
     pass
 
 
 def post_fork(server, worker):
 
     # memory spec defaults
     _memory_max_usage = 0
     _memory_usage_check_interval = 60
     _memory_usage_recovery_threshold = 0.8
 
     ini_path = os.path.abspath(server.cfg.paste)
     conf = _get_config(ini_path)
     if conf and 'server:main' in conf:
         section = conf['server:main']
 
         if section.get('memory_max_usage'):
             _memory_max_usage = int(section.get('memory_max_usage'))
         if section.get('memory_usage_check_interval'):
             _memory_usage_check_interval = int(section.get('memory_usage_check_interval'))
         if section.get('memory_usage_recovery_threshold'):
             _memory_usage_recovery_threshold = float(section.get('memory_usage_recovery_threshold'))
 
     worker._memory_max_usage = _memory_max_usage
     worker._memory_usage_check_interval = _memory_usage_check_interval
     worker._memory_usage_recovery_threshold = _memory_usage_recovery_threshold
 
     # register memory last check time, with some random offset so we don't recycle all
     # at once
     worker._last_memory_check_time = _time_with_offset(_memory_usage_check_interval)
 
     if _memory_max_usage:
         server.log.info("[%-10s] WORKER spawned with max memory set at %s", worker.pid,
                         _format_data_size(_memory_max_usage))
     else:
         server.log.info("[%-10s] WORKER spawned", worker.pid)
 
 
 def pre_exec(server):
     server.log.info("Forked child, re-executing.")
 
 
 def on_starting(server):
     server_lbl = '{} {}'.format(server.proc_name, server.address)
     server.log.info("Server %s is starting.", server_lbl)
 
 
 def when_ready(server):
     server.log.info("Server %s is ready. Spawning workers", server)
 
 
 def on_reload(server):
     pass
 
 
 def _format_data_size(size, unit="B", precision=1, binary=True):
     """Format a number using SI units (kilo, mega, etc.).
 
     ``size``: The number as a float or int.
 
     ``unit``: The unit name in plural form. Examples: "bytes", "B".
 
     ``precision``: How many digits to the right of the decimal point. Default
     is 1.  0 suppresses the decimal point.
 
     ``binary``: If false, use base-10 decimal prefixes (kilo = K = 1000).
     If true, use base-2 binary prefixes (kibi = Ki = 1024).
 
     ``full_name``: If false (default), use the prefix abbreviation ("k" or
     "Ki").  If true, use the full prefix ("kilo" or "kibi"). If false,
     use abbreviation ("k" or "Ki").
 
     """
 
     if not binary:
         base = 1000
         multiples = ('', 'k', 'M', 'G', 'T', 'P', 'E', 'Z', 'Y')
     else:
         base = 1024
         multiples = ('', 'Ki', 'Mi', 'Gi', 'Ti', 'Pi', 'Ei', 'Zi', 'Yi')
 
     sign = ""
     if size > 0:
         m = int(math.log(size, base))
     elif size < 0:
         sign = "-"
         size = -size
         m = int(math.log(size, base))
     else:
         m = 0
     if m > 8:
         m = 8
 
     if m == 0:
         precision = '%.0f'
     else:
         precision = '%%.%df' % precision
 
     size = precision % (size / math.pow(base, m))
 
     return '%s%s %s%s' % (sign, size.strip(), multiples[m], unit)
 
 
 def _check_memory_usage(worker):
     memory_max_usage = worker._memory_max_usage
     if not memory_max_usage:
         return
 
     memory_usage_check_interval = worker._memory_usage_check_interval
     memory_usage_recovery_threshold = memory_max_usage * worker._memory_usage_recovery_threshold
 
     elapsed = time.time() - worker._last_memory_check_time
     if elapsed > memory_usage_check_interval:
         mem_usage = _get_process_rss()
         if mem_usage and mem_usage > memory_max_usage:
             worker.log.info(
                 "memory usage %s > %s, forcing gc",
                 _format_data_size(mem_usage), _format_data_size(memory_max_usage))
             # Try to clean it up by forcing a full collection.
             gc.collect()
             mem_usage = _get_process_rss()
             if mem_usage > memory_usage_recovery_threshold:
                 # Didn't clean up enough, we'll have to terminate.
                 worker.log.warning(
                     "memory usage %s > %s after gc, quitting",
                     _format_data_size(mem_usage), _format_data_size(memory_max_usage))
                 # This will cause worker to auto-restart itself
                 worker.alive = False
         worker._last_memory_check_time = time.time()
 
 
 def worker_int(worker):
     worker.log.info("[%-10s] worker received INT or QUIT signal", worker.pid)
 
     # get traceback info, on worker crash
     id2name = dict([(th.ident, th.name) for th in threading.enumerate()])
     code = []
     for thread_id, stack in sys._current_frames().items():
         code.append(
             "\n# Thread: %s(%d)" % (id2name.get(thread_id, ""), thread_id))
         for fname, lineno, name, line in traceback.extract_stack(stack):
             code.append('File: "%s", line %d, in %s' % (fname, lineno, name))
             if line:
                 code.append("  %s" % (line.strip()))
     worker.log.debug("\n".join(code))
 
 
 def worker_abort(worker):
     worker.log.info("[%-10s] worker received SIGABRT signal", worker.pid)
 
 
 def worker_exit(server, worker):
     worker.log.info("[%-10s] worker exit", worker.pid)
 
 
 def child_exit(server, worker):
     worker.log.info("[%-10s] worker child exit", worker.pid)
 
 
 def pre_request(worker, req):
     worker.start_time = time.time()
     worker.log.debug(
         "GNCRN PRE  WORKER [cnt:%s]: %s %s", worker.nr, req.method, req.path)
 
 
 def post_request(worker, req, environ, resp):
     total_time = time.time() - worker.start_time
     worker.log.debug(
         "GNCRN POST WORKER [cnt:%s]: %s %s resp: %s, Load Time: %.4fs",
         worker.nr, req.method, req.path, resp.status_code, total_time)
     _check_memory_usage(worker)
 
 
 class RhodeCodeLogger(Logger):
     """
     Custom Logger that allows some customization that gunicorn doesn't allow
     """
 
     datefmt = r"%Y-%m-%d %H:%M:%S"
 
     def __init__(self, cfg):
         Logger.__init__(self, cfg)
 
     def now(self):
         """ return date in RhodeCode Log format """
         now = time.time()
         msecs = int((now - long(now)) * 1000)
         return time.strftime(self.datefmt, time.localtime(now)) + '.{0:03d}'.format(msecs)
 
 
 logger_class = RhodeCodeLogger

configs/production.ini

@@ -1,759 +1,762 b''
 
 
 ################################################################################
 ##                RHODECODE COMMUNITY  EDITION CONFIGURATION                  ##
 ################################################################################
 
 [DEFAULT]
 ## Debug flag sets all loggers to debug, and enables request tracking
 debug = false
 
 ################################################################################
 ##                            EMAIL CONFIGURATION                             ##
 ## Uncomment and replace with the email address which should receive          ##
 ## any error reports after an application crash                               ##
 ## Additionally these settings will be used by the RhodeCode mailing system   ##
 ################################################################################
 
 ## prefix all emails subjects with given prefix, helps filtering out emails
 #email_prefix = [RhodeCode]
 
 ## email FROM address all mails will be sent
 #app_email_from = rhodecode-noreply@localhost
 
 #smtp_server = mail.server.com
 #smtp_username =
 #smtp_password =
 #smtp_port =
 #smtp_use_tls = false
 #smtp_use_ssl = true
 
 [server:main]
 ## COMMON ##
 host = 127.0.0.1
 port = 5000
 
 ###########################################################
 ## WAITRESS WSGI SERVER - Recommended for Development  ####
 ###########################################################
 
 #use = egg:waitress#main
 ## number of worker threads
 #threads = 5
 ## MAX BODY SIZE 100GB
 #max_request_body_size = 107374182400
 ## Use poll instead of select, fixes file descriptors limits problems.
 ## May not work on old windows systems.
 #asyncore_use_poll = true
 
 
 ##########################
 ## GUNICORN WSGI SERVER ##
 ##########################
 ## run with gunicorn --log-config rhodecode.ini --paste rhodecode.ini
 
 use = egg:gunicorn#main
 ## Sets the number of process workers. More workers means more concurrent connections
 ## RhodeCode can handle at the same time. Each additional worker also it increases
 ## memory usage as each has it's own set of caches.
 ## Recommended value is (2 * NUMBER_OF_CPUS + 1), eg 2CPU = 5 workers, but no more
 ## than 8-10 unless for really big deployments .e.g 700-1000 users.
 ## `instance_id = *` must be set in the [app:main] section below (which is the default)
 ## when using more than 1 worker.
 workers = 2
 
+## Gunicorn access log level
+loglevel = info
+
 ## process name visible in process list
 proc_name = rhodecode
 
 ## type of worker class, one of sync, gevent
 ## recommended for bigger setup is using of of other than sync one
 worker_class = gevent
 
 ## The maximum number of simultaneous clients. Valid only for Gevent
 worker_connections = 10
 
 ## max number of requests that worker will handle before being gracefully
 ## restarted, could prevent memory leaks
 max_requests = 1000
 max_requests_jitter = 30
 
 ## amount of time a worker can spend with handling a request before it
 ## gets killed and restarted. Set to 6hrs
 timeout = 21600
 
 ## The maximum size of HTTP request line in bytes.
 ## 0 for unlimited
 limit_request_line = 0
 
 ## Limit the number of HTTP headers fields in a request.
 ## By default this value is 100 and can't be larger than 32768.
 limit_request_fields = 32768
 
 ## Limit the allowed size of an HTTP request header field.
 ## Value is a positive number or 0.
 ## Setting it to 0 will allow unlimited header field sizes.
 limit_request_field_size = 0
 
 ## Timeout for graceful workers restart.
 ## After receiving a restart signal, workers have this much time to finish
 ## serving requests. Workers still alive after the timeout (starting from the
 ## receipt of the restart signal) are force killed.
 graceful_timeout = 3600
 
 # The number of seconds to wait for requests on a Keep-Alive connection.
 # Generally set in the 1-5 seconds range.
 keepalive = 2
 
 ## Maximum memory usage that each worker can use before it will receive a
 ## graceful restart signal, e.g 10MB = 10485760 (10 * 1024 * 1024)
 # 0 = memory monitoring is disabled
 memory_max_usage = 0
 
 ## How often in seconds to check for memory usage for each gunicorn worker
 memory_usage_check_interval = 60
 
 ## Threshold value for which we don't recycle worker if GarbageCollection
 ## frees up enough resources. Before each restart we try to run GC on worker
 ## in case we get enough free memory after that, restart will not happen.
 memory_usage_recovery_threshold = 0.8
 
 ## prefix middleware for RhodeCode.
 ## recommended when using proxy setup.
 ## allows to set RhodeCode under a prefix in server.
 ## eg https://server.com/custom_prefix. Enable `filter-with =` option below as well.
 ## And set your prefix like: `prefix = /custom_prefix`
 ## be sure to also set beaker.session.cookie_path = /custom_prefix if you need
 ## to make your cookies only work on prefix url
 [filter:proxy-prefix]
 use = egg:PasteDeploy#prefix
 prefix = /
 
 [app:main]
 ## The %(here)s variable will be replaced with the absolute path of parent directory
 ## of this file
 ## In addition ENVIRONMENT variables usage is possible, e.g
 ## sqlalchemy.db1.url = {ENV_RC_DB_URL}
 
 use = egg:rhodecode-enterprise-ce
 
 ## enable proxy prefix middleware, defined above
 #filter-with = proxy-prefix
 
 ## encryption key used to encrypt social plugin tokens,
 ## remote_urls with credentials etc, if not set it defaults to
 ## `beaker.session.secret`
 #rhodecode.encrypted_values.secret =
 
 ## decryption strict mode (enabled by default). It controls if decryption raises
 ## `SignatureVerificationError` in case of wrong key, or damaged encryption data.
 #rhodecode.encrypted_values.strict = false
 
 ## Pick algorithm for encryption. Either fernet (more secure) or aes (default)
 ## fernet is safer, and we strongly recommend switching to it.
 ## Due to backward compatibility aes is used as default.
 #rhodecode.encrypted_values.algorithm = fernet
 
 ## return gzipped responses from RhodeCode (static files/application)
 gzip_responses = false
 
 ## auto-generate javascript routes file on startup
 generate_js_files = false
 
 ## System global default language.
 ## All available languages: en(default), be, de, es, fr, it, ja, pl, pt, ru, zh
 lang = en
 
 ## Perform a full repository scan and import on each server start.
 ## Settings this to true could lead to very long startup time.
 startup.import_repos = false
 
 ## Uncomment and set this path to use archive download cache.
 ## Once enabled, generated archives will be cached at this location
 ## and served from the cache during subsequent requests for the same archive of
 ## the repository.
 #archive_cache_dir = /tmp/tarballcache
 
 ## URL at which the application is running. This is used for Bootstrapping
 ## requests in context when no web request is available. Used in ishell, or
 ## SSH calls. Set this for events to receive proper url for SSH calls.
 app.base_url = http://rhodecode.local
 
 ## Unique application ID. Should be a random unique string for security.
 app_instance_uuid = rc-production
 
 ## Cut off limit for large diffs (size in bytes). If overall diff size on
 ## commit, or pull request exceeds this limit this diff will be displayed
 ## partially. E.g 512000 == 512Kb
 cut_off_limit_diff = 512000
 
 ## Cut off limit for large files inside diffs (size in bytes). Each individual
 ## file inside diff which exceeds this limit will be displayed partially.
 ##  E.g 128000 == 128Kb
 cut_off_limit_file = 128000
 
 ## use cached version of vcs repositories everywhere. Recommended to be `true`
 vcs_full_cache = true
 
 ## Force https in RhodeCode, fixes https redirects, assumes it's always https.
 ## Normally this is controlled by proper http flags sent from http server
 force_https = false
 
 ## use Strict-Transport-Security headers
 use_htsts = false
 
 # Set to true if your repos are exposed using the dumb protocol
 git_update_server_info = false
 
 ## RSS/ATOM feed options
 rss_cut_off_limit = 256000
 rss_items_per_page = 10
 rss_include_diff = false
 
 ## gist URL alias, used to create nicer urls for gist. This should be an
 ## url that does rewrites to _admin/gists/{gistid}.
 ## example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
 ## RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/{gistid}
 gist_alias_url =
 
 ## List of views (using glob pattern syntax) that AUTH TOKENS could be
 ## used for access.
 ## Adding ?auth_token=TOKEN_HASH to the url authenticates this request as if it
 ## came from the the logged in user who own this authentication token.
 ## Additionally @TOKEN syntax can be used to bound the view to specific
 ## authentication token. Such view would be only accessible when used together
 ## with this authentication token
 ##
 ## list of all views can be found under `/_admin/permissions/auth_token_access`
 ## The list should be "," separated and on a single line.
 ##
 ## Most common views to enable:
 #    RepoCommitsView:repo_commit_download
 #    RepoCommitsView:repo_commit_patch
 #    RepoCommitsView:repo_commit_raw
 #    RepoCommitsView:repo_commit_raw@TOKEN
 #    RepoFilesView:repo_files_diff
 #    RepoFilesView:repo_archivefile
 #    RepoFilesView:repo_file_raw
 #    GistView:*
 api_access_controllers_whitelist =
 
 ## Default encoding used to convert from and to unicode
 ## can be also a comma separated list of encoding in case of mixed encodings
 default_encoding = UTF-8
 
 ## instance-id prefix
 ## a prefix key for this instance used for cache invalidation when running
 ## multiple instances of RhodeCode, make sure it's globally unique for
 ## all running RhodeCode instances. Leave empty if you don't use it
 instance_id =
 
 ## Fallback authentication plugin. Set this to a plugin ID to force the usage
 ## of an authentication plugin also if it is disabled by it's settings.
 ## This could be useful if you are unable to log in to the system due to broken
 ## authentication settings. Then you can enable e.g. the internal RhodeCode auth
 ## module to log in again and fix the settings.
 ##
 ## Available builtin plugin IDs (hash is part of the ID):
 ## egg:rhodecode-enterprise-ce#rhodecode
 ## egg:rhodecode-enterprise-ce#pam
 ## egg:rhodecode-enterprise-ce#ldap
 ## egg:rhodecode-enterprise-ce#jasig_cas
 ## egg:rhodecode-enterprise-ce#headers
 ## egg:rhodecode-enterprise-ce#crowd
 #rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode
 
 ## alternative return HTTP header for failed authentication. Default HTTP
 ## response is 401 HTTPUnauthorized. Currently HG clients have troubles with
 ## handling that causing a series of failed authentication calls.
 ## Set this variable to 403 to return HTTPForbidden, or any other HTTP code
 ## This will be served instead of default 401 on bad authentication
 auth_ret_code =
 
 ## use special detection method when serving auth_ret_code, instead of serving
 ## ret_code directly, use 401 initially (Which triggers credentials prompt)
 ## and then serve auth_ret_code to clients
 auth_ret_code_detection = false
 
 ## locking return code. When repository is locked return this HTTP code. 2XX
 ## codes don't break the transactions while 4XX codes do
 lock_ret_code = 423
 
 ## allows to change the repository location in settings page
 allow_repo_location_change = true
 
 ## allows to setup custom hooks in settings page
 allow_custom_hooks_settings = true
 
 ## Generated license token required for EE edition license.
 ## New generated token value can be found in Admin > settings > license page.
 license_token =
 
 ## This flag would hide sensitive information on the license page
 license.hide_license_info = false
 
 ## supervisor connection uri, for managing supervisor and logs.
 supervisor.uri =
 ## supervisord group name/id we only want this RC instance to handle
 supervisor.group_id = prod
 
 ## Display extended labs settings
 labs_settings_active = true
 
 ## Custom exception store path, defaults to TMPDIR
 ## This is used to store exception from RhodeCode in shared directory
 #exception_tracker.store_path =
 
 ## File store configuration. This is used to store and serve uploaded files
 file_store.enabled = true
 ## Storage backend, available options are: local
 file_store.backend = local
 ## path to store the uploaded binaries
 file_store.storage_path = %(here)s/data/file_store
 
 
 ####################################
 ###        CELERY CONFIG        ####
 ####################################
 ## run: /path/to/celery worker \
 ##     -E --beat --app rhodecode.lib.celerylib.loader \
 ##     --scheduler rhodecode.lib.celerylib.scheduler.RcScheduler \
 ##     --loglevel DEBUG --ini /path/to/rhodecode.ini
 
 use_celery = false
 
 ## connection url to the message broker (default redis)
 celery.broker_url = redis://localhost:6379/8
 
 ## rabbitmq example
 #celery.broker_url = amqp://rabbitmq:qweqwe@localhost:5672/rabbitmqhost
 
 ## maximum tasks to execute before worker restart
 celery.max_tasks_per_child = 100
 
 ## tasks will never be sent to the queue, but executed locally instead.
 celery.task_always_eager = false
 
 #####################################
 ###         DOGPILE CACHE        ####
 #####################################
 ## Default cache dir for caches.  Putting this into a ramdisk
 ## can boost performance, eg. /tmpfs/data_ramdisk, however this directory might require
 ## large amount of space
 cache_dir = %(here)s/data
 
 ## `cache_perms` cache settings for permission tree, auth TTL.
 rc_cache.cache_perms.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_perms.expiration_time = 300
 
 ## alternative `cache_perms` redis backend with distributed lock
 #rc_cache.cache_perms.backend = dogpile.cache.rc.redis
 #rc_cache.cache_perms.expiration_time = 300
 ## redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_perms.arguments.redis_expiration_time = 7200
 #rc_cache.cache_perms.arguments.socket_timeout = 30
 #rc_cache.cache_perms.arguments.host = localhost
 #rc_cache.cache_perms.arguments.port = 6379
 #rc_cache.cache_perms.arguments.db = 0
 ## more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_perms.arguments.distributed_lock = true
 
 ## `cache_repo` cache settings for FileTree, Readme, RSS FEEDS
 rc_cache.cache_repo.backend = dogpile.cache.rc.file_namespace
 rc_cache.cache_repo.expiration_time = 2592000
 
 ## alternative `cache_repo` redis backend with distributed lock
 #rc_cache.cache_repo.backend = dogpile.cache.rc.redis
 #rc_cache.cache_repo.expiration_time = 2592000
 ## redis_expiration_time needs to be greater then expiration_time
 #rc_cache.cache_repo.arguments.redis_expiration_time = 2678400
 #rc_cache.cache_repo.arguments.socket_timeout = 30
 #rc_cache.cache_repo.arguments.host = localhost
 #rc_cache.cache_repo.arguments.port = 6379
 #rc_cache.cache_repo.arguments.db = 1
 ## more Redis options: https://dogpilecache.sqlalchemy.org/en/latest/api.html#redis-backends
 #rc_cache.cache_repo.arguments.distributed_lock = true
 
 ## cache settings for SQL queries, this needs to use memory type backend
 rc_cache.sql_cache_short.backend = dogpile.cache.rc.memory_lru
 rc_cache.sql_cache_short.expiration_time = 30
 
 ## `cache_repo_longterm` cache for repo object instances, this needs to use memory
 ## type backend as the objects kept are not pickle serializable
 rc_cache.cache_repo_longterm.backend = dogpile.cache.rc.memory_lru
 ## by default we use 96H, this is using invalidation on push anyway
 rc_cache.cache_repo_longterm.expiration_time = 345600
 ## max items in LRU cache, reduce this number to save memory, and expire last used
 ## cached objects
 rc_cache.cache_repo_longterm.max_size = 10000
 
 
 ####################################
 ###       BEAKER SESSION        ####
 ####################################
 
 ## .session.type is type of storage options for the session, current allowed
 ## types are file, ext:memcached, ext:redis, ext:database, and memory (default).
 beaker.session.type = file
 beaker.session.data_dir = %(here)s/data/sessions
 
 ## redis sessions
 #beaker.session.type = ext:redis
 #beaker.session.url = redis://127.0.0.1:6379/2
 
 ## db based session, fast, and allows easy management over logged in users
 #beaker.session.type = ext:database
 #beaker.session.table_name = db_session
 #beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
 #beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
 #beaker.session.sa.pool_recycle = 3600
 #beaker.session.sa.echo = false
 
 beaker.session.key = rhodecode
 beaker.session.secret = production-rc-uytcxaz
 beaker.session.lock_dir = %(here)s/data/sessions/lock
 
 ## Secure encrypted cookie. Requires AES and AES python libraries
 ## you must disable beaker.session.secret to use this
 #beaker.session.encrypt_key = key_for_encryption
 #beaker.session.validate_key = validation_key
 
 ## sets session as invalid(also logging out user) if it haven not been
 ## accessed for given amount of time in seconds
 beaker.session.timeout = 2592000
 beaker.session.httponly = true
 ## Path to use for the cookie. Set to prefix if you use prefix middleware
 #beaker.session.cookie_path = /custom_prefix
 
 ## uncomment for https secure cookie
 beaker.session.secure = false
 
 ## auto save the session to not to use .save()
 beaker.session.auto = false
 
 ## default cookie expiration time in seconds, set to `true` to set expire
 ## at browser close
 #beaker.session.cookie_expires = 3600
 
 ###################################
 ## SEARCH INDEXING CONFIGURATION ##
 ###################################
 ## Full text search indexer is available in rhodecode-tools under
 ## `rhodecode-tools index` command
 
 ## WHOOSH Backend, doesn't require additional services to run
 ## it works good with few dozen repos
 search.module = rhodecode.lib.index.whoosh
 search.location = %(here)s/data/index
 
 ########################################
 ###    CHANNELSTREAM CONFIG         ####
 ########################################
 ## channelstream enables persistent connections and live notification
 ## in the system. It's also used by the chat system
 
 channelstream.enabled = false
 
 ## server address for channelstream server on the backend
 channelstream.server = 127.0.0.1:9800
 
 ## location of the channelstream server from outside world
 ## use ws:// for http or wss:// for https. This address needs to be handled
 ## by external HTTP server such as Nginx or Apache
 ## see Nginx/Apache configuration examples in our docs
 channelstream.ws_url = ws://rhodecode.yourserver.com/_channelstream
 channelstream.secret = secret
 channelstream.history.location = %(here)s/channelstream_history
 
 ## Internal application path that Javascript uses to connect into.
 ## If you use proxy-prefix the prefix should be added before /_channelstream
 channelstream.proxy_path = /_channelstream
 
 ## Live chat for commits/pull requests. Requires CHANNELSTREAM to be enabled
 ## and configured. (EE edition only)
 chat.enabled = true
 
 
 ###################################
 ##       APPENLIGHT CONFIG       ##
 ###################################
 
 ## Appenlight is tailored to work with RhodeCode, see
 ## http://appenlight.com for details how to obtain an account
 
 ## Appenlight integration enabled
 appenlight = false
 
 appenlight.server_url = https://api.appenlight.com
 appenlight.api_key = YOUR_API_KEY
 #appenlight.transport_config = https://api.appenlight.com?threaded=1&timeout=5
 
 ## used for JS client
 appenlight.api_public_key = YOUR_API_PUBLIC_KEY
 
 ## TWEAK AMOUNT OF INFO SENT HERE
 
 ## enables 404 error logging (default False)
 appenlight.report_404 = false
 
 ## time in seconds after request is considered being slow (default 1)
 appenlight.slow_request_time = 1
 
 ## record slow requests in application
 ## (needs to be enabled for slow datastore recording and time tracking)
 appenlight.slow_requests = true
 
 ## enable hooking to application loggers
 appenlight.logging = true
 
 ## minimum log level for log capture
 appenlight.logging.level = WARNING
 
 ## send logs only from erroneous/slow requests
 ## (saves API quota for intensive logging)
 appenlight.logging_on_error = false
 
 ## list of additional keywords that should be grabbed from environ object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always send following info:
 ## 'REMOTE_USER', 'REMOTE_ADDR', 'SERVER_NAME', 'CONTENT_TYPE' + all keys that
 ## start with HTTP* this list be extended with additional keywords here
 appenlight.environ_keys_whitelist =
 
 ## list of keywords that should be blanked from request object
 ## can be string with comma separated list of words in lowercase
 ## (by default client will always blank keys that contain following words
 ## 'password', 'passwd', 'pwd', 'auth_tkt', 'secret', 'csrf'
 ## this list be extended with additional keywords set here
 appenlight.request_keys_blacklist =
 
 ## list of namespaces that should be ignores when gathering log entries
 ## can be string with comma separated list of namespaces
 ## (by default the client ignores own entries: appenlight_client.client)
 appenlight.log_namespace_blacklist =
 
 
 ###########################################
 ###   MAIN RHODECODE DATABASE CONFIG    ###
 ###########################################
 #sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode.db?timeout=30
 #sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 #sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode?charset=utf8
 # pymysql is an alternative driver for MySQL, use in case of problems with default one
 #sqlalchemy.db1.url = mysql+pymysql://root:qweqwe@localhost/rhodecode
 
 sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode
 
 # see sqlalchemy docs for other advanced settings
 
 ## print the sql statements to output
 sqlalchemy.db1.echo = false
 ## recycle the connections after this amount of seconds
 sqlalchemy.db1.pool_recycle = 3600
 
 ## the number of connections to keep open inside the connection pool.
 ## 0 indicates no limit
 #sqlalchemy.db1.pool_size = 5
 
 ## the number of connections to allow in connection pool "overflow", that is
 ## connections that can be opened above and beyond the pool_size setting,
 ## which defaults to five.
 #sqlalchemy.db1.max_overflow = 10
 
 ## Connection check ping, used to detect broken database connections
 ## could be enabled to better handle cases if MySQL has gone away errors
 #sqlalchemy.db1.ping_connection = true
 
 ##################
 ### VCS CONFIG ###
 ##################
 vcs.server.enable = true
 vcs.server = localhost:9900
 
 ## Web server connectivity protocol, responsible for web based VCS operations
 ## Available protocols are:
 ## `http` - use http-rpc backend (default)
 vcs.server.protocol = http
 
 ## Push/Pull operations protocol, available options are:
 ## `http` - use http-rpc backend (default)
 vcs.scm_app_implementation = http
 
 ## Push/Pull operations hooks protocol, available options are:
 ## `http` - use http-rpc backend (default)
 vcs.hooks.protocol = http
 
 ## Host on which this instance is listening for hooks. If vcsserver is in other location
 ## this should be adjusted.
 vcs.hooks.host = 127.0.0.1
 
 vcs.server.log_level = info
 ## Start VCSServer with this instance as a subprocess, useful for development
 vcs.start_server = false
 
 ## List of enabled VCS backends, available options are:
 ## `hg`  - mercurial
 ## `git` - git
 ## `svn` - subversion
 vcs.backends = hg, git, svn
 
 vcs.connection_timeout = 3600
 ## Compatibility version when creating SVN repositories. Defaults to newest version when commented out.
 ## Available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible, pre-1.9-compatible
 #vcs.svn.compatible_version = pre-1.8-compatible
 
 
 ############################################################
 ### Subversion proxy support (mod_dav_svn)               ###
 ### Maps RhodeCode repo groups into SVN paths for Apache ###
 ############################################################
 ## Enable or disable the config file generation.
 svn.proxy.generate_config = false
 ## Generate config file with `SVNListParentPath` set to `On`.
 svn.proxy.list_parent_path = true
 ## Set location and file name of generated config file.
 svn.proxy.config_file_path = %(here)s/mod_dav_svn.conf
 ## alternative mod_dav config template. This needs to be a mako template
 #svn.proxy.config_template = ~/.rccontrol/enterprise-1/custom_svn_conf.mako
 ## Used as a prefix to the `Location` block in the generated config file.
 ## In most cases it should be set to `/`.
 svn.proxy.location_root = /
 ## Command to reload the mod dav svn configuration on change.
 ## Example: `/etc/init.d/apache2 reload` or /home/USER/apache_reload.sh
 ## Make sure user who runs RhodeCode process is allowed to reload Apache
 #svn.proxy.reload_cmd = /etc/init.d/apache2 reload
 ## If the timeout expires before the reload command finishes, the command will
 ## be killed. Setting it to zero means no timeout. Defaults to 10 seconds.
 #svn.proxy.reload_timeout = 10
 
 ############################################################
 ### SSH Support Settings                                 ###
 ############################################################
 
 ## Defines if a custom authorized_keys file should be created and written on
 ## any change user ssh keys. Setting this to false also disables possibility
 ## of adding SSH keys by users from web interface. Super admins can still
 ## manage SSH Keys.
 ssh.generate_authorized_keyfile = false
 
 ## Options for ssh, default is `no-pty,no-port-forwarding,no-X11-forwarding,no-agent-forwarding`
 # ssh.authorized_keys_ssh_opts =
 
 ## Path to the authorized_keys file where the generate entries are placed.
 ## It is possible to have multiple key files specified in `sshd_config` e.g.
 ## AuthorizedKeysFile %h/.ssh/authorized_keys %h/.ssh/authorized_keys_rhodecode
 ssh.authorized_keys_file_path = ~/.ssh/authorized_keys_rhodecode
 
 ## Command to execute the SSH wrapper. The binary is available in the
 ## RhodeCode installation directory.
 ## e.g ~/.rccontrol/community-1/profile/bin/rc-ssh-wrapper
 ssh.wrapper_cmd = ~/.rccontrol/community-1/rc-ssh-wrapper
 
 ## Allow shell when executing the ssh-wrapper command
 ssh.wrapper_cmd_allow_shell = false
 
 ## Enables logging, and detailed output send back to the client during SSH
 ## operations. Useful for debugging, shouldn't be used in production.
 ssh.enable_debug_logging = false
 
 ## Paths to binary executable, by default they are the names, but we can
 ## override them if we want to use a custom one
 ssh.executable.hg = ~/.rccontrol/vcsserver-1/profile/bin/hg
 ssh.executable.git = ~/.rccontrol/vcsserver-1/profile/bin/git
 ssh.executable.svn = ~/.rccontrol/vcsserver-1/profile/bin/svnserve
 
 ## Enables SSH key generator web interface. Disabling this still allows users
 ## to add their own keys.
 ssh.enable_ui_key_generator = true
 
 
 ## Dummy marker to add new entries after.
 ## Add any custom entries below. Please don't remove.
 custom.conf = 1
 
 
 ################################
 ### LOGGING CONFIGURATION   ####
 ################################
 [loggers]
 keys = root, sqlalchemy, beaker, celery, rhodecode, ssh_wrapper
 
 [handlers]
 keys = console, console_sql
 
 [formatters]
 keys = generic, color_formatter, color_formatter_sql
 
 #############
 ## LOGGERS ##
 #############
 [logger_root]
 level = NOTSET
 handlers = console
 
 [logger_sqlalchemy]
 level = INFO
 handlers = console_sql
 qualname = sqlalchemy.engine
 propagate = 0
 
 [logger_beaker]
 level = DEBUG
 handlers =
 qualname = beaker.container
 propagate = 1
 
 [logger_rhodecode]
 level = DEBUG
 handlers =
 qualname = rhodecode
 propagate = 1
 
 [logger_ssh_wrapper]
 level = DEBUG
 handlers =
 qualname = ssh_wrapper
 propagate = 1
 
 [logger_celery]
 level = DEBUG
 handlers =
 qualname = celery
 
 
 ##############
 ## HANDLERS ##
 ##############
 
 [handler_console]
 class = StreamHandler
 args = (sys.stderr, )
 level = INFO
 formatter = generic
 
 [handler_console_sql]
 # "level = DEBUG" logs SQL queries and results.
 # "level = INFO" logs SQL queries.
 # "level = WARN" logs neither.  (Recommended for production systems.)
 class = StreamHandler
 args = (sys.stderr, )
 level = WARN
 formatter = generic
 
 ################
 ## FORMATTERS ##
 ################
 
 [formatter_generic]
 class = rhodecode.lib.logging_formatter.ExceptionAwareFormatter
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter]
 class = rhodecode.lib.logging_formatter.ColorFormatter
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S
 
 [formatter_color_formatter_sql]
 class = rhodecode.lib.logging_formatter.ColorFormatterSql
 format = %(asctime)s.%(msecs)03d [%(process)d] %(levelname)-5.5s [%(name)s] %(message)s
 datefmt = %Y-%m-%d %H:%M:%S