docs: added SAML documentation.

- Remove few obsolete replaces
- update authentication docs
- cleanups and fixes

docs/auth/auth-saml-duosecurity.rst

@@ -0,0 +1,105 b''
+.. _config-saml-duosecurity-ref:
+
+
+SAML 2.0 with Duo Security
+--------------------------
+
+**This plugin is available only in EE Edition.**
+
+|RCE| supports SAML 2.0 Authentication with Duo Security provider. This allows
+users to log-in to RhodeCode via SSO mechanism of external identity provider
+such as Duo. The login can be triggered either by the external IDP, or internally
+by clicking specific authentication button on the log-in page.
+
+
+Configuration steps
+^^^^^^^^^^^^^^^^^^^
+
+To configure Duo Security SAML authentication, use the following steps:
+
+1. From the |RCE| interface, select
+   :menuselection:`Admin --> Authentication`
+2. Activate the `Duo Security` plugin and select :guilabel:`Save`
+3. Go to newly available menu option called `Duo Security` on the left side.
+4. Check the `enabled` check box in the plugin configuration section,
+   and fill in the required SAML information and :guilabel:`Save`, for more details,
+   see :ref:`config-saml-duosecurity`
+
+
+.. _config-saml-duosecurity:
+
+
+Example SAML Duo Security configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Example configuration for SAML 2.0 with Duo Security provider::
+
+    *option*: `enabled` => `True`
+    # Enable or disable this authentication plugin.
+
+    *option*: `cache_ttl` => `0`
+    # Amount of seconds to cache the authentication and permissions check response call for this plugin.
+    # Useful for expensive calls like LDAP to improve the performance of the system (0 means disabled).
+
+    *option*: `debug` => `True`
+    # Enable or disable debug mode that shows SAML errors in the RhodeCode logs.
+
+    *option*: `entity_id` => `http://rc-app.com/dag/saml2/idp/metadata.php`
+    # Identity Provider entity/metadata URI.
+    # E.g. https://duo-gateway.com/dag/saml2/idp/metadata.php
+
+    *option*: `sso_service_url` => `http://rc-app.com/dag/saml2/idp/SSOService.php?spentityid=http://rc.local.pl/_admin/auth/duosecurity/saml-metadata`
+    # SSO (SingleSignOn) endpoint URL of the IdP. This can be used to initialize login
+    # E.g. https://duo-gateway.com/dag/saml2/idp/SSOService.php?spentityid=<metadata_entity_id>
+
+    *option*: `slo_service_url` => `http://rc-app.com/dag/saml2/idp/SingleLogoutService.php?ReturnTo=http://rc-app.com/dag/module.php/duosecurity/logout.php`
+    # SLO (SingleLogout) endpoint URL of the IdP.
+    # E.g. https://duo-gateway.com/dag/saml2/idp/SingleLogoutService.php?ReturnTo=http://duo-gateway.com/_admin/saml/sign-out-endpoint
+
+    *option*: `x509cert` => `<CERTIFICATE_STRING>`
+    # Identity provider public x509 certificate. It will be converted to single-line format without headers
+
+    *option*: `name_id_format` => `sha-1`
+    # The format that specifies how the NameID is sent to the service provider.
+
+    *option*: `signature_algo` => `sha-256`
+    # Type of Algorithm to use for verification of SAML signature on Identity provider side
+
+    *option*: `digest_algo` => `sha-256`
+    # Type of Algorithm to use for verification of SAML digest on Identity provider side
+
+    *option*: `cert_dir` => `/etc/saml/`
+    # Optional directory to store service provider certificate and private keys.
+    # Expected certs for the SP should be stored in this folder as:
+    #  * sp.key     Private Key
+    #  * sp.crt     Public cert
+    #  * sp_new.crt Future Public cert
+    #
+    # Also you can use other cert to sign the metadata of the SP using the:
+    #  * metadata.key
+    #  * metadata.crt
+
+    *option*: `user_id_attribute` => `PersonImmutableID`
+    # User ID Attribute name. This defines which attribute in SAML response will be used to link accounts via unique id.
+    # Ensure this is returned from DuoSecurity for example via duo_username
+
+    *option*: `username_attribute` => `User.username`
+    # Username Attribute name. This defines which attribute in SAML response will map to an username.
+
+    *option*: `email_attribute` => `User.email`
+    # Email Attribute name. This defines which attribute in SAML response will map to an email address.
+
+
+Below is example setup from DUO Administration page that can be used with above config.
+
+.. image:: ../images/saml-duosecurity-service-provider-example.png
+   :alt: DUO Security SAML setup example
+   :scale: 50 %
+
+
+Below is an example attribute mapping set for IDP provider required by the above config.
+
+
+.. image:: ../images/saml-duosecurity-attributes-example.png
+   :alt: DUO Security SAML setup example
+   :scale: 50 %
  No newline at end of file

docs/auth/auth-saml-generic.rst

@@ -0,0 +1,18 b''
+.. _config-saml-generic-ref:
+
+
+SAML 2.0 Authentication
+-----------------------
+
+
+**This plugin is available only in EE Edition.**
+
+RhodeCode Supports standard SAML 2.0 SSO for the web-application part.
+
+Please check for reference two example providers:
+
+.. toctree::
+
+   auth-saml-duosecurity
+   auth-saml-onelogin
+

docs/auth/auth-saml-onelogin.rst

@@ -0,0 +1,106 b''
+.. _config-saml-onelogin-ref:
+
+
+SAML 2.0 with One Login
+-----------------------
+
+**This plugin is available only in EE Edition.**
+
+|RCE| supports SAML 2.0 Authentication with OneLogin provider. This allows
+users to log-in to RhodeCode via SSO mechanism of external identity provider
+such as OneLogin. The login can be triggered either by the external IDP, or internally
+by clicking specific authentication button on the log-in page.
+
+
+Configuration steps
+^^^^^^^^^^^^^^^^^^^
+
+To configure OneLogin SAML authentication, use the following steps:
+
+1. From the |RCE| interface, select
+   :menuselection:`Admin --> Authentication`
+2. Activate the `OneLogin` plugin and select :guilabel:`Save`
+3. Go to newly available menu option called `OneLogin` on the left side.
+4. Check the `enabled` check box in the plugin configuration section,
+   and fill in the required SAML information and :guilabel:`Save`, for more details,
+   see :ref:`config-saml-onelogin`
+
+
+.. _config-saml-onelogin:
+
+
+Example SAML OneLogin configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Example configuration for SAML 2.0 with OneLogin provider::
+
+    *option*: `enabled` => `True`
+    # Enable or disable this authentication plugin.
+
+    *option*: `cache_ttl` => `0`
+    # Amount of seconds to cache the authentication and permissions check response call for this plugin.
+    # Useful for expensive calls like LDAP to improve the performance of the system (0 means disabled).
+
+    *option*: `debug` => `True`
+    # Enable or disable debug mode that shows SAML errors in the RhodeCode logs.
+
+    *option*: `entity_id` => `https://app.onelogin.com/saml/metadata/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx`
+    # Identity Provider entity/metadata URI.
+    # E.g. https://app.onelogin.com/saml/metadata/<onelogin_connector_id>
+
+    *option*: `sso_service_url` => `https://customer-domain.onelogin.com/trust/saml2/http-post/sso/xxxxxx`
+    # SSO (SingleSignOn) endpoint URL of the IdP. This can be used to initialize login
+    # E.g. https://app.onelogin.com/trust/saml2/http-post/sso/<onelogin_connector_id>
+
+    *option*: `slo_service_url` => `https://customer-domain.onelogin.com/trust/saml2/http-redirect/slo/xxxxxx`
+    # SLO (SingleLogout) endpoint URL of the IdP.
+    # E.g. https://app.onelogin.com/trust/saml2/http-redirect/slo/<onelogin_connector_id>
+
+    *option*: `x509cert` => `<CERTIFICATE_STRING>`
+    # Identity provider public x509 certificate. It will be converted to single-line format without headers
+
+    *option*: `name_id_format` => `sha-1`
+    # The format that specifies how the NameID is sent to the service provider.
+
+    *option*: `signature_algo` => `sha-256`
+    # Type of Algorithm to use for verification of SAML signature on Identity provider side
+
+    *option*: `digest_algo` => `sha-256`
+    # Type of Algorithm to use for verification of SAML digest on Identity provider side
+
+    *option*: `cert_dir` => `/etc/saml/`
+    # Optional directory to store service provider certificate and private keys.
+    # Expected certs for the SP should be stored in this folder as:
+    #  * sp.key     Private Key
+    #  * sp.crt     Public cert
+    #  * sp_new.crt Future Public cert
+    #
+    # Also you can use other cert to sign the metadata of the SP using the:
+    #  * metadata.key
+    #  * metadata.crt
+
+    *option*: `user_id_attribute` => `PersonImmutableID`
+    # User ID Attribute name. This defines which attribute in SAML response will be used to link accounts via unique id.
+    # Ensure this is returned from OneLogin for example via Internal ID
+
+    *option*: `username_attribute` => `User.username`
+    # Username Attribute name. This defines which attribute in SAML response will map to an username.
+
+    *option*: `email_attribute` => `User.email`
+    # Email Attribute name. This defines which attribute in SAML response will map to an email address.
+
+
+
+Below is example setup that can be used with OneLogin SAML authentication that can be used with above config..
+
+.. image:: ../images/saml-onelogin-config-example.png
+   :alt: OneLogin SAML setup example
+   :scale: 50 %
+
+
+Below is an example attribute mapping set for IDP provider required by the above config.
+
+
+.. image:: ../images/saml-onelogin-attributes-example.png
+   :alt: OneLogin SAML setup example
+   :scale: 50 %
  No newline at end of file

docs/admin/adding-anonymous-user.rst

@@ -3,19 +3,19 b''
 Anonymous Users
 ---------------
 
-By default, |RCM| provides |repo| access for registered users only. It can be
+By default, |RCE| provides |repo| access for registered users only. It can be
 configured to be **world-open** in terms of read and write permissions. This
-configuration is called "Anonymous Access" and allows |RCM| to be used as a
+configuration is called "Anonymous Access" and allows |RCE| to be used as a
 public hub where unregistered users have access to your |repos|.
 
 Anonymous access is useful for open source projects, universities,
 or if running inside a restricted internal corporate network to serve
 documents to all employees. Anonymous users get the default user permission
-settings that are applied across the whole |RCM| system.
+settings that are applied across the whole |RCE| system.
 
 To enable anonymous access to your |repos|, use the following steps:
 
-1. From the |RCM| interface, select :menuselection:`Admin --> Permissions`.
+1. From the |RCE| interface, select :menuselection:`Admin --> Permissions`.
 2. On the Application tab, check the :guilabel:`Allow anonymous access` box.
 3. Select :guilabel:`Save`.
 4. To set the anonymous user access permissions, which are based on the

docs/admin/admin-tricks.rst

@@ -166,7 +166,7 b' 2. Add your custom hook details, you can'
    ``pretxnchangegroup.example`` with value ``python:/path/to/custom_hook.py:my_func_name``
 3. Select :guilabel:`Save`
 
-Also, see the |RC| Extensions section of the :ref:`rc-tools` guide. |RC|
+Also, see the RhodeCode Extensions section of the :ref:`rc-tools` guide. RhodeCode
 Extensions can be used to add additional hooks to your instance and comes
 with a number of pre-built plugins if you chose to install them.
 

docs/admin/apache-wsgi-coding.rst

@@ -3,7 +3,7 b''
 Apache WSGI Configuration
 ^^^^^^^^^^^^^^^^^^^^^^^^^
 
-|RCM| can also be set up with Apache under ``mod_wsgi``. To configure this
+|RCE| can also be set up with Apache under ``mod_wsgi``. To configure this
 use the following steps.
 
 1. Install ``mod_wsgi`` using the following command:
@@ -50,6 +50,6 b' The following is an example ``wsgi`` dis'
 .. note::
 
    When using `mod_wsgi` the same version of |hg| must be running in your
-   system's |PY| environment and on |RCM|. To check the |RCM| version,
+   system's |PY| environment and on |RCE|. To check the |RCE| version,
    on the interface go to
    :menuselection:`Admin --> Settings --> System Info`

docs/admin/config-files-overview.rst

@@ -67,7 +67,7 b' sections.'
         Default location: :file:`/home/{user}/.rccontrol/cache/MANIFEST`
 
         |RCC| uses this file to source the latest available builds from the
-        secure |RC| download channels. The only reason to mess with this file
+        secure RhodeCode download channels. The only reason to mess with this file
         is if you need to do an offline installation,
         see the :ref:`Offline Installation<control:offline-installer-ref>`
         instructions, otherwise |RCC| will completely manage this file.

docs/admin/glossary.rst

@@ -33,7 +33,7 b' Glossary'
         Adding more machines or workers into your pool of resources.
 
     Instance
-        A single installed version of one of the |RC| products. It could
+        A single installed version of one of the RhodeCode products. It could
         refer to |RCE| or the VCS server depending on the context.
 
     Plugin

docs/admin/indexing.rst

@@ -3,7 +3,7 b''
 Full-text Search
 ----------------
 
-By default |RC| is configured to use `Whoosh`_ to index |repos| and
+By default RhodeCode is configured to use `Whoosh`_ to index |repos| and
 provide full-text search.
 
 |RCE| also provides support for `Elasticsearch`_ as a backend for scalable
@@ -46,7 +46,7 b' Configure the ``.rhoderc`` File'
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 |RCT| uses the :file:`/home/{user}/.rhoderc` file for connection details
-to |RCM| instances. If this file is not automatically created,
+to |RCE| instances. If this file is not automatically created,
 you can configure it using the following example. You need to configure the
 details for each instance you want to index.
 
@@ -62,7 +62,7 b' details for each instance you want to in'
      - VERSION: 1.5.0
      - URL: http://127.0.0.1:10000
 
-To get your API Token, on the |RCM| interface go to
+To get your API Token, on the |RCE| interface go to
 :menuselection:`username --> My Account --> Auth tokens`
 
 .. code-block:: ini

docs/admin/public-access.rst

@@ -3,7 +3,7 b''
 Public Access
 -------------
 
-By default |RCM| allows users to read all **public** |repos|. User
+By default |RCE| allows users to read all **public** |repos|. User
 permissions and |repo| access can be configured explicitly,
 and those permissions will override any default settings. The default
 settings can be found under the following section:

docs/admin/setting-default-permissions.rst

@@ -3,7 +3,7 b''
 Setting Default Permissions
 ---------------------------
 
-Default permissions allow you to configure |RCM| so that when a new |repo|, user group,
+Default permissions allow you to configure |RCE| so that when a new |repo|, user group,
 or user is created their permissions are already defined. To set default permissions you need administrator
 privileges. See the following sections for setting up your permissions system:
 
@@ -19,7 +19,7 b' Setting User defaults'
 
 To set default user permissions, use the following steps.
 
-1. From the |RCM| interface, select :menuselection:`Admin --> Permissions`
+1. From the |RCE| interface, select :menuselection:`Admin --> Permissions`
 2. Select the :guilabel:`Global` tab from the left-hand menu. The permissions
    set on this screen apply to users and user-groups across the whole instance.
 3. Save your changes
@@ -31,7 +31,7 b' Setting User Group defaults'
 
 To set default user group permissions, use the following steps.
 
-1. From the |RCM| interface, select :menuselection:`Admin --> User groups`
+1. From the |RCE| interface, select :menuselection:`Admin --> User groups`
 2. Select :guilabel:`Permissions`, and configure the default user
    permissions. All users will get these permissions unless
    individually set.
@@ -48,7 +48,7 b' Setting Repository defaults'
 
 To set default |repo| permissions, use the following steps.
 
-1. From the |RCM| interface, select :menuselection:`Admin --> Permissions`
+1. From the |RCE| interface, select :menuselection:`Admin --> Permissions`
 2. Select the :guilabel:`Object` tab from the left-hand menu and set the
    |perm| permissions
 3. Save your changes
@@ -60,7 +60,7 b' Setting Repository Group defaults'
 
 To set default Repository Group permissions, use the following steps.
 
-1. From the |RCM| interface, select :menuselection:`Admin --> Repository Groups`
+1. From the |RCE| interface, select :menuselection:`Admin --> Repository Groups`
 2. Select :guilabel:`Edit` beside the |repo| group you wish to configure
 3. On the left-hand pane select :guilabel:`Permissions`
 4. Set the default permissions for all |repos| created in this group

docs/admin/setting-repo-perms.rst

@@ -3,12 +3,12 b''
 Repository Administration
 =========================
 
-Repository permissions in |RCM| can be managed in a number of different ways.
+Repository permissions in |RCE| can be managed in a number of different ways.
 This overview should give you an insight into how you could adopt particular
 settings for your needs:
 
 * Global |repo| permissions: This allows you to set the default permissions
-  for each new |repo| created within |RCM|, see :ref:`repo-default-ref`. All
+  for each new |repo| created within |RCE|, see :ref:`repo-default-ref`. All
   |repos| created will inherit these permissions unless explicitly configured.
 * Individual |repo| permissions: To set individual |repo| permissions,
   see :ref:`set-repo-perms`.

docs/admin/system-overview.rst

@@ -59,7 +59,7 b' Supported Browsers'
 System Requirements
 -------------------
 
-|RCM| performs best on machines with ultra-fast hard disks. Generally disk
+|RCE| performs best on machines with ultra-fast hard disks. Generally disk
 performance is more important than CPU performance. In a corporate production
 environment handling 1000s of users and |repos| you should deploy on a 12+
 core 64GB RAM server. In short, the more RAM the better.
@@ -68,7 +68,7 b' core 64GB RAM server. In short, the more'
 For example:
 
  - for team of 1 - 5 active users you can run on 1GB RAM machine with 1CPU
- - above 250 active users, |RCM| needs at least 8GB of memory.
+ - above 250 active users, |RCE| needs at least 8GB of memory.
    Number of CPUs is less important, but recommended to have at least 2-3 CPUs
 
 
@@ -114,7 +114,7 b' Connection Methods'
 
 * HTTPS
 * SSH
-* |RCM| API
+* |RCE| API
 
 Internationalization Support
 ----------------------------

docs/admin/user-admin.rst

@@ -3,7 +3,7 b''
 User Administration
 ===================
 
-|RCM| enables you to define permissions for the following entities within the
+|RCE| enables you to define permissions for the following entities within the
 system; **users**, **user groups**, **repositories**, **repository groups**.
 
 Within each one of these entities you can set default settings,

docs/admin/vcs-server.rst

@@ -3,13 +3,13 b''
 VCS Server Management
 ---------------------
 
-The VCS Server handles |RCM| backend functionality. You need to configure
-a VCS Server to run with a |RCM| instance. If you do not, you will be missing
-the connection between |RCM| and its |repos|. This will cause error messages
+The VCS Server handles |RCE| backend functionality. You need to configure
+a VCS Server to run with a |RCE| instance. If you do not, you will be missing
+the connection between |RCE| and its |repos|. This will cause error messages
 on the web interface. You can run your setup in the following configurations,
 currently the best performance is one of following:
 
-* One VCS Server per |RCM| instance.
+* One VCS Server per |RCE| instance.
 * One VCS Server handling multiple instances.
 
 .. important::
@@ -49,7 +49,7 b' To configure a |RCE| instance to use a V'
 |RCE| VCS Server Options
 ^^^^^^^^^^^^^^^^^^^^^^^^
 
-The following list shows the available options on the |RCM| side of the
+The following list shows the available options on the |RCE| side of the
 connection to the VCS Server. The settings are configured per
 instance in the
 :file:`/home/{user}/.rccontrol/{instance-id}/rhodecode.ini` file.
@@ -75,7 +75,7 b' instance in the'
 
     \vcs.server <host:port>
         Set the host, either hostname or IP Address, and port of the VCS server
-        you wish to run with your |RCM| instance.
+        you wish to run with your |RCE| instance.
 
 .. code-block:: ini
 

docs/api/api.rst

@@ -22,12 +22,12 b' API access can also be turned on for eac'
 decorated with a `@LoginRequired` decorator. To enable API access, change
 the standard login decorator to `@LoginRequired(api_access=True)`.
 
-From |RCM| version 1.7.0 you can configure a white list
+From |RCE| version 1.7.0 you can configure a white list
 of views that have API access enabled by default. To enable these,
-edit the |RCM| configuration ``.ini`` file. The default location is:
+edit the |RCE| configuration ``.ini`` file. The default location is:
 
-* |RCM| Pre-2.2.7 :file:`root/rhodecode/data/production.ini`
-* |RCM| 3.0 :file:`/home/{user}/.rccontrol/{instance-id}/rhodecode.ini`
+* |RCE| Pre-2.2.7 :file:`root/rhodecode/data/production.ini`
+* |RCE| 3.0 :file:`/home/{user}/.rccontrol/{instance-id}/rhodecode.ini`
 
 To configure the white list, edit this section of the file. In this
 configuration example, API access is granted to the patch/diff raw file and

docs/auth/auth-crowd.rst

@@ -5,8 +5,8 b' Crowd'
 
 To enable Crowd authentication, use the following steps:
 
-1. From the |RCM| interface, go to :menuselection:`Admin --> Authentication`
-2. Enable the ``rhodecode.lib.auth_modules.auth_crowd`` library and select
+1. From the |RCE| interface, go to :menuselection:`Admin --> Authentication`
+2. Activate the ``rhodecode.lib.auth_modules.auth_crowd`` library and select
    :guilabel:`Save`
 3. On the Crowd plugin settings section, do the following:
 

docs/auth/auth-ldap-groups.rst

@@ -3,25 +3,24 b''
 LDAP/AD With User Groups Sync
 -----------------------------
 
-|RCM| supports LDAP (Lightweight Directory Access Protocol) or
+**This plugin is available only in EE Edition.**
+
+|RCE| supports LDAP (Lightweight Directory Access Protocol) or
 AD (active Directory) authentication.
-All LDAP versions are supported, with the following |RCM| plugins managing each:
-
-* For LDAP/AD with user group sync use ``LDAP + User Groups (egg:rhodecode-enterprise-ee#ldap_group)``
+All LDAP versions are currently supported.
 
 RhodeCode reads all data defined from plugin and creates corresponding
 accounts on local database after receiving data from LDAP. This is done on
 every user log-in including operations like pushing/pulling/checkout.
 In addition group membership is read from LDAP and following operations are done:
 
-- automatic addition of user to |RCM| user group
-- automatic removal of user from any other  |RCM| user groups not specified in LDAP.
+- automatic addition of user to |RCE| user group
+- automatic removal of user from any other  |RCE| user groups not specified in LDAP.
   The removal is done *only* on groups that are marked to be synced from ldap.
   This setting can be changed in advanced settings on user groups
-- automatic creation of user groups if they aren't yet existing in |RCM|
+- automatic creation of user groups if they aren't yet existing in |RCE|
 - marking user as super-admins if he is a member of any admin group defined in plugin settings
 
-This plugin is available only in EE Edition.
 
 .. important::
 
@@ -39,11 +38,12 b' LDAP Configuration Steps'
 
 To configure |LDAP|, use the following steps:
 
-1. From the |RCM| interface, select
+1. From the |RCE| interface, select
    :menuselection:`Admin --> Authentication`
-2. Enable the ldap+ groups plugin and select :guilabel:`Save`
-3. Select the :guilabel:`Enabled` check box in the plugin configuration section
-4. Add the required LDAP information and :guilabel:`Save`, for more details,
+2. Activate the `LDAP + User Groups` plugin and select :guilabel:`Save`
+3. Go to newly available menu option called `LDAP + User Groups` on the left side.
+4. Check the `enabled` check box in the plugin configuration section,
+   and fill in the required LDAP information and :guilabel:`Save`, for more details,
    see :ref:`config-ldap-groups-examples`
 
 For a more detailed description of LDAP objects, see :ref:`ldap-gloss-ref`:
@@ -52,59 +52,107 b' For a more detailed description of LDAP '
 
 Example LDAP configuration
 ^^^^^^^^^^^^^^^^^^^^^^^^^^
-.. code-block:: bash
+
+Below is example setup that can be used with Active Directory and LDAP server with groups sync::
+
+    *option*: `enabled` => `True`
+    # Enable or disable this authentication plugin.
+
+    *option*: `cache_ttl` => `360`
+    # Amount of seconds to cache the authentication and permissions check response call for this plugin.
+    # Useful for expensive calls like LDAP to improve the performance of the system (0 means disabled).
+
+    *option*: `host` => `192.168.245.143,192.168.1.240`
+    # Host[s] of the LDAP Server
+    # (e.g., 192.168.2.154, or ldap-server.domain.com.
+    #  Multiple servers can be specified using commas
+
+    *option*: `port` => `389`
+    # Custom port that the LDAP server is listening on. Default value is: 389, use 689 for LDAPS(SSL)
+
+    *option*: `timeout` => `300`
+    # Timeout for LDAP connection
+
+    *option*: `dn_user` => `[e-mail]`
+    # Optional user DN/account to connect to LDAP if authentication is required.
+    # e.g., cn=admin,dc=mydomain,dc=com, or uid=root,cn=users,dc=mydomain,dc=com, or [e-mail]
+
+    *option*: `dn_pass` => `SomeSecret`
+    # Password to authenticate for given user DN.
+
+    *option*: `tls_kind` => `PLAIN`
+    # TLS Type
+
+    *option*: `tls_reqcert` => `NEVER`
+    # Require Cert over TLS?. Self-signed and custom certificates can be used when
+    #  `RhodeCode Certificate` found in admin > settings > system info page is extended.
+
+    *option*: `tls_cert_file` => ``
+    # This specifies the PEM-format file path containing certificates for use in TLS connection.
+    # If not specified `TLS Cert dir` will be used
+
+    *option*: `tls_cert_dir` => `/etc/openldap/cacerts`
+    # This specifies the path of a directory that contains individual CA certificates in separate files.
+
+    *option*: `base_dn` => `dc=rhodecode,dc=com`
+    # Base DN to search. Dynamic bind is supported. Add `$login` marker in it to be replaced with current user credentials
+    # (e.g., dc=mydomain,dc=com, or ou=Users,dc=mydomain,dc=com)
+
+    *option*: `user_search_base` => `ou=RC-Users`
+    # User search base will extend the Base DN
+    # (e.g., ou=Users will result in ou=Users,dc=mydomain,dc=com root DN)
 
-        # Auth Cache TTL, Defines the caching for authentication to offload LDAP server.
-        # This means that cache result will be saved for 3600 before contacting LDAP server to verify the user access
-        3600
-        # Host, comma seperated format is optionally possible to specify more than 1 server
-        https://ldap1.server.com/ldap-admin/,https://ldap2.server.com/ldap-admin/
-        # Default LDAP Port, use 689 for LDAPS
-        389
-        # Account, used for SimpleBind if LDAP server requires an authentication
-        e.g [e-mail]
-        # Password used for simple bind
-        ldap-user-password
-        # LDAP connection security
-        LDAPS
-        # Certificate checks level
-        DEMAND
-        # Base DN
-        cn=Rufus Magillacuddy,ou=users,dc=rhodecode,dc=com
-        # User Search Base
-        ou=groups,ou=users
-        # LDAP search filter to narrow the results
-        (objectClass=person)
-        # LDAP search scope
-        SUBTREE
-        # Login attribute
-        sAMAccountName
-        # First Name Attribute to read
-        givenName
-        # Last Name Attribute to read
-        sn
-        # Email Attribute to read email address from
-        mail
-        # group extraction method
-        rfc2307bis
-        # Group search base
-        ou=RC-Groups
-        # Group Name Attribute, field to read the group name from
-        sAMAAccountName
-        # User Member of Attribute, field in which groups are stored
-        memberOf
-        # LDAP Group Search Filter, allows narrowing the results
+    *option*: `user_search_filter` => ``
+    # Filter to narrow results
+    # (e.g., (&(objectCategory=Person)(objectClass=user)), or
+    # (memberof=cn=rc-login,ou=groups,ou=company,dc=mydomain,dc=com)))
+
+    *option*: `search_scope` => `SUBTREE`
+    # How deep to search LDAP. If unsure set to SUBTREE
+
+    *option*: `attr_login` => `sAMAccountName`
+    # LDAP Attribute to map to user name (e.g., uid, or sAMAccountName)
+
+    *option*: `attr_email` => `mail`
+    # LDAP Attribute to map to email address (e.g., mail).
+    # Emails are a crucial part of RhodeCode.
+    # If possible add a valid email attribute to ldap users.
+
+    *option*: `attr_firstname` => `givenName`
+    # LDAP Attribute to map to first name (e.g., givenName)
+
+    *option*: `attr_lastname` => `sn`
+    # LDAP Attribute to map to last name (e.g., sn)
+
+    *option*: `group_extraction_type` => `rfc2307bis`
+    # With rfc2307, group members are listed by name in the memberUid attribute
+    # With rfc2307bis (Microsoft AD compatible) group members are listed by DN and stored in the member attribute
 
-        # Admin Groups. Comma separated list of groups. If user is member of
-        # any of those he will be marked as super-admin in RhodeCode
-        admins, management
+    *option*: `group_search_base` => `ou=RC-Groups`
+    # Group search base will extend the Base DN (e.g. ou=Groups will result in ou=Groups,dc=mydomain,dc=com)
 
+    *option*: `group_name_attr` => `sAMAccountName`
+    # LDAP Attribute to map to group name (e.g., cn, or sAMAccountName)
+
+    *option*: `user_member_of` => `memberOf`
+    # Users Attribute used to fetch the group membership.
+    # Use if users have stored group membership inside their attributes
+    # (e.g., memberOf, or userMemberOf)
 
-Below is example setup that can be used with Active Directory and ldap groups.
+    *option*: `group_search_filter` => ``
+    # Filter to narrow results (e.g., (&(objectCategory=Group)(objectClass=group)), etc)
+
+    *option*: `group_member_of` => `memberOf`
+    # LDAP Attribute used to resolve the parent group (e.g., memberOf)
 
-.. image:: ../images/ldap-groups-example.png
-   :alt: LDAP/AD setup example
-   :scale: 50 %
+    *option*: `admin_groups` => `Admins,Management`
+    # A comma separated list of group names that identify users as RhodeCode Administrators (e.g., admins)
+
+    *option*: `admin_groups_sync` => `full`
+    # Way to sync Admin groups.
+    # Full means admin flag is set to on or off according to membership in administrator group defined above.
+    # On-only means the flag is only set to on, and not turned off once user is no longer a member
+
 
 .. toctree::
 

docs/auth/auth-ldap.rst

@@ -3,11 +3,9 b''
 LDAP/AD
 -------
 
-|RCM| supports LDAP (Lightweight Directory Access Protocol) or
+|RCE| supports LDAP (Lightweight Directory Access Protocol) or
 AD (active Directory) authentication.
-All LDAP versions are supported, with the following |RCM| plugins managing each:
-
-* For LDAP or Active Directory use ``LDAP (egg:rhodecode-enterprise-ce#ldap)``
+All LDAP versions are currently supported.
 
 RhodeCode reads all data defined from plugin and creates corresponding
 accounts on local database after receiving data from LDAP. This is done on
@@ -30,11 +28,12 b' LDAP Configuration Steps'
 
 To configure |LDAP|, use the following steps:
 
-1. From the |RCM| interface, select
+1. From the |RCE| interface, select
    :menuselection:`Admin --> Authentication`
-2. Enable the ldap plugin and select :guilabel:`Save`
-3. Select the :guilabel:`Enabled` check box in the plugin configuration section
-4. Add the required LDAP information and :guilabel:`Save`, for more details,
+2. Activate the `LDAP` plugin and select :guilabel:`Save`
+3. Go to newly available menu option called `LDAP` on the left side.
+4. Check the `enabled` check box in the plugin configuration section,
+   and fill in the required LDAP information and :guilabel:`Save`, for more details,
    see :ref:`config-ldap-examples`
 
 For a more detailed description of LDAP objects, see :ref:`ldap-gloss-ref`:
@@ -43,44 +42,73 b' For a more detailed description of LDAP '
 
 Example LDAP configuration
 ^^^^^^^^^^^^^^^^^^^^^^^^^^
-.. code-block:: bash
+
+Below is example setup that can be used with Active Directory/LDAP server::
+
+    *option*: `enabled` => `True`
+    # Enable or disable this authentication plugin.
+
+    *option*: `cache_ttl` => `360`
+    # Amount of seconds to cache the authentication and permissions check response call for this plugin.
+    # Useful for expensive calls like LDAP to improve the performance of the system (0 means disabled).
+
+    *option*: `host` => `192.168.245.143,192.168.1.240`
+    # Host[s] of the LDAP Server
+    # (e.g., 192.168.2.154, or ldap-server.domain.com.
+    #  Multiple servers can be specified using commas
+
+    *option*: `port` => `389`
+    # Custom port that the LDAP server is listening on. Default value is: 389, use 689 for LDAPS(SSL)
+
+    *option*: `timeout` => `300`
+    # Timeout for LDAP connection
+
+    *option*: `dn_user` => `[e-mail]`
+    # Optional user DN/account to connect to LDAP if authentication is required.
+    # e.g., cn=admin,dc=mydomain,dc=com, or uid=root,cn=users,dc=mydomain,dc=com, or [e-mail]
+
+    *option*: `dn_pass` => `SomeSecret`
+    # Password to authenticate for given user DN.
+
+    *option*: `tls_kind` => `PLAIN`
+    # TLS Type
 
-        # Auth Cache TTL, Defines the caching for authentication to offload LDAP server.
-        # This means that cache result will be saved for 3600 before contacting LDAP server to verify the user access
-        3600
-        # Host, comma seperated format is optionally possible to specify more than 1 server
-        https://ldap1.server.com/ldap-admin/,https://ldap2.server.com/ldap-admin/
-        # Default LDAP Port, use 689 for LDAPS
-        389
-        # Account, used for SimpleBind if LDAP server requires an authentication
-        e.g [e-mail]
-        # Password used for simple bind
-        ldap-user-password
-        # LDAP connection security
-        LDAPS
-        # Certificate checks level
-        DEMAND
-        # Base DN
-        cn=Rufus Magillacuddy,ou=users,dc=rhodecode,dc=com
-        # LDAP search filter to narrow the results
-        (objectClass=person)
-        # LDAP search scope
-        SUBTREE
-        # Login attribute
-        sAMAccountName
-        # First Name Attribute to read
-        givenName
-        # Last Name Attribute to read
-        sn
-        # Email Attribute to read email address from
-        mail
+    *option*: `tls_reqcert` => `NEVER`
+    # Require Cert over TLS?. Self-signed and custom certificates can be used when
+    #  `RhodeCode Certificate` found in admin > settings > system info page is extended.
+
+    *option*: `tls_cert_file` => ``
+    # This specifies the PEM-format file path containing certificates for use in TLS connection.
+    # If not specified `TLS Cert dir` will be used
+
+    *option*: `tls_cert_dir` => `/etc/openldap/cacerts`
+    # This specifies the path of a directory that contains individual CA certificates in separate files.
+
+    *option*: `base_dn` => `cn=Rufus Magillacuddy,ou=users,dc=rhodecode,dc=com`
+    # Base DN to search. Dynamic bind is supported. Add `$login` marker in it to be replaced with current user credentials
+    # (e.g., dc=mydomain,dc=com, or ou=Users,dc=mydomain,dc=com)
 
+    *option*: `filter` => `(objectClass=person)`
+    # Filter to narrow results
+    # (e.g., (&(objectCategory=Person)(objectClass=user)), or
+    # (memberof=cn=rc-login,ou=groups,ou=company,dc=mydomain,dc=com)))
 
-Below is example setup that can be used with Active Directory/LDAP server.
+    *option*: `search_scope` => `SUBTREE`
+    # How deep to search LDAP. If unsure set to SUBTREE
+
+    *option*: `attr_login` => `sAMAccountName`
+    # LDAP Attribute to map to user name (e.g., uid, or sAMAccountName)
 
-.. image:: ../images/ldap-example.png
-   :alt: LDAP/AD setup example
-   :scale: 50 %
+    *option*: `attr_email` => `mail`
+    # LDAP Attribute to map to email address (e.g., mail).
+    # Emails are a crucial part of RhodeCode.
+    # If possible add a valid email attribute to ldap users.
+
+    *option*: `attr_firstname` => `givenName`
+    # LDAP Attribute to map to first name (e.g., givenName)
+
+    *option*: `attr_lastname` => `sn`
+    # LDAP Attribute to map to last name (e.g., sn)
 
 
 .. toctree::

docs/auth/auth-pam.rst

@@ -5,8 +5,8 b' PAM'
 
 To enable PAM authentication, use the following steps:
 
-1. From the |RCM| interface, go to :menuselection:`Admin --> Authentication`
-2. Enable the ``rhodecode.lib.auth_modules.auth_pam`` library and select save
+1. From the |RCE| interface, go to :menuselection:`Admin --> Authentication`
+2. Activate the ``rhodecode.lib.auth_modules.auth_pam`` library and select save
 3. On the PAM plugin settings section, do the following:
 
    * Check the :guilabel:`Enable` checkbox

docs/auth/auth-token.rst

@@ -3,7 +3,10 b''
 Authentication Tokens
 ---------------------
 
-|RCE| has 4 different kinds of authentication tokens.
+|RCE| has 4 different kinds of authentication tokens. `API token`, `Feed tokens` work
+without a need to enable any additional authentication. `VCS tokens` require dedicated
+authentication plugin to be activated. `Web Interface tokens` are controlled by the
+white_list configuration.
 
 * *API tokens*: API tokens can only be used to execute |RCE| API operations.
   You can store your API token and assign it to each instance in
@@ -13,14 +16,6 b' Authentication Tokens'
 * *Feed tokens*: The feed token can only be used to access the RSS feed.
    Usually those are safe to store inside your RSS feed reader.
 
-* *VCS tokens*: You can use these to authenticate with |git|, |hg| and |svn|
-  operations instead of a password. They are designed to be used with
-  CI Servers or other third party tools that require |repo| access.
-  They are also a good replacement for SSH based access.
-  To use these tokens you need be enabled special authentication method on
-  |RCE|, as they are disabled by default.
-  See :ref:`enable-vcs-tokens`.
-
 * *Web Interface tokens*: These token allows users to access the web
   interface of |RCE| without logging in.
 
@@ -41,7 +36,16 b' Authentication Tokens'
    https://rhodecode.com/repo/archive/tip.zip?auth_token=<web-api-token>
 
    # To show commit diff without logging into Web UI
-   https://rhodecode.com/repo/changeset-diff/<sha>?auth_token=<web-api-token>
+   https://rhodecode.com/repo/raw-diff/<sha>?auth_token=<web-api-token>
+
+* *VCS tokens*: You can use these to authenticate with |git|, |hg| and |svn|
+  operations instead of a password. They are designed to be used with
+  CI Servers or other third party tools that require |repo| access.
+  They are also a good replacement for SSH based access.
+  To use these tokens you need be enabled special authentication method on
+  |RCE|, as they are disabled by default.
+  See :ref:`enable-vcs-tokens`.
+
 
 .. _enable-vcs-tokens:
 
@@ -51,7 +55,7 b' Enabling VCS Tokens'
 To enable VCS Tokens, use the following steps:
 
 1. Go to :menuselection:`Admin --> Authentication`.
-2. Enable the ``rhodecode.lib.auth_modules.auth_token`` plugin.
+2. Activate the ``rhodecode.lib.auth_modules.auth_token`` plugin.
 3. Click :guilabel:`Save`.
 
 Authentication Token Tips
@@ -67,7 +71,7 b' Creating Tokens'
 
 To create authentication tokens for an user, use the following steps:
 
-1. From the |RCM| interface go to
+1. From the |RCE| interface go to
    :menuselection:`Username --> My Account --> Auth tokens`.
 
 2. Label and Add the tokens you wish to use with |RCE|.

docs/auth/auth.rst

@@ -4,29 +4,31 b' Authentication Options'
 ======================
 
 |RCE| provides a built in authentication against its own database. This is
-implemented using ``rhodecode.lib.auth_rhodecode`` plugin. This plugin is
-enabled by default.
+implemented using ``RhodeCode Internal`` plugin. This plugin is enabled by default.
 Additionally, |RCE| provides a Pluggable Authentication System. This gives the
 administrator greater control over how users authenticate with the system.
 
 .. important::
 
-  You can disable the built in |RCM| authentication plugin
-  ``rhodecode.lib.auth_rhodecode`` and force all authentication to go
+  You can disable the built in |RCE| authentication plugin
+  ``RhodeCode Internal`` and force all authentication to go
   through your authentication plugin of choice e.g LDAP only.
   However, if you do this, and your external authentication tools fails,
-  you will be unable to access |RCM|.
+  accessing |RCE| will be blocked unless a fallback plugin is
+  enabled via :file: rhodecode.ini
 
-|RCM| comes with the following user authentication management plugins:
+
+|RCE| comes with the following user authentication management plugins:
 
 
 .. toctree::
 
+    auth-token
     auth-ldap
     auth-ldap-groups
+    auth-saml-generic
+    auth-saml-onelogin
+    auth-saml-duosecurity
     auth-crowd
     auth-pam
-    auth-token
     ssh-connection
-
-

docs/auth/ldap-active-directory.rst

@@ -3,27 +3,73 b''
 Active Directory
 ----------------
 
-|RCM| can use Microsoft Active Directory for user authentication. This is
+|RCE| can use Microsoft Active Directory for user authentication. This is
 done through an LDAP or LDAPS connection to Active Directory. Use the
 following example LDAP configuration setting to set your Active Directory
-authentication.
-
-.. code-block:: ini
-    
-    # Set the Base DN
-    Base DN              = OU=SBSUsers,OU=Users,OU=MyBusiness,DC=v3sys,DC=local
-    # Set the Active Directory SAM-Account-Name
-    Login Attribute      = sAMAccountName
-    # Set the Active Directory user name
-    First Name Attribute = usernameame
-    # Set the Active Directory user surname
-    Last Name Attribute  = user_surname
-    # Set the Active Directory user email
-    E-mail Attribute     = userEmail
+authentication::
 
 
-Below is example setup that can be used with Active Directory and ldap groups.
+    *option*: `enabled` => `True`
+    # Enable or disable this authentication plugin.
+
+    *option*: `cache_ttl` => `360`
+    # Amount of seconds to cache the authentication and permissions check response call for this plugin.
+    # Useful for expensive calls like LDAP to improve the performance of the system (0 means disabled).
+
+    *option*: `host` => `192.168.245.143,192.168.1.240`
+    # Host[s] of the LDAP Server
+    # (e.g., 192.168.2.154, or ldap-server.domain.com.
+    #  Multiple servers can be specified using commas
+
+    *option*: `port` => `389`
+    # Custom port that the LDAP server is listening on. Default value is: 389, use 689 for LDAPS(SSL)
+
+    *option*: `timeout` => `300`
+    # Timeout for LDAP connection
+
+    *option*: `dn_user` => `[e-mail]`
+    # Optional user DN/account to connect to LDAP if authentication is required.
+    # e.g., cn=admin,dc=mydomain,dc=com, or uid=root,cn=users,dc=mydomain,dc=com, or [e-mail]
+
+    *option*: `dn_pass` => `SomeSecret`
+    # Password to authenticate for given user DN.
+
+    *option*: `tls_kind` => `PLAIN`
+    # TLS Type
+
+    *option*: `tls_reqcert` => `NEVER`
+    # Require Cert over TLS?. Self-signed and custom certificates can be used when
+    #  `RhodeCode Certificate` found in admin > settings > system info page is extended.
 
-.. image:: ../images/ldap-groups-example.png
-   :alt: LDAP/AD setup example
-   :scale: 50 %
  No newline at end of file
+    *option*: `tls_cert_file` => ``
+    # This specifies the PEM-format file path containing certificates for use in TLS connection.
+    # If not specified `TLS Cert dir` will be used
+
+    *option*: `tls_cert_dir` => `/etc/openldap/cacerts`
+    # This specifies the path of a directory that contains individual CA certificates in separate files.
+
+    *option*: `base_dn` => `OU=SBSUsers,OU=Users,OU=MyBusiness,DC=v3sys,DC=local`
+    # Base DN to search. Dynamic bind is supported. Add `$login` marker in it to be replaced with current user credentials
+    # (e.g., dc=mydomain,dc=com, or ou=Users,dc=mydomain,dc=com)
+
+    *option*: `filter` => `(objectClass=person)`
+    # Filter to narrow results
+    # (e.g., (&(objectCategory=Person)(objectClass=user)), or
+    # (memberof=cn=rc-login,ou=groups,ou=company,dc=mydomain,dc=com)))
+
+    *option*: `search_scope` => `SUBTREE`
+    # How deep to search LDAP. If unsure set to SUBTREE
+
+    *option*: `attr_login` => `sAMAccountName`
+    # LDAP Attribute to map to user name (e.g., uid, or sAMAccountName)
+
+    *option*: `attr_email` => `userEmail`
+    # LDAP Attribute to map to email address (e.g., mail).
+    # Emails are a crucial part of RhodeCode.
+    # If possible add a valid email attribute to ldap users.
+
+    *option*: `attr_firstname` => `user_firstname`
+    # LDAP Attribute to map to first name (e.g., givenName)
+
+    *option*: `attr_lastname` => `user_surname`
+    # LDAP Attribute to map to last name (e.g., sn)

docs/auth/ldap-authentication.rst

@@ -46,7 +46,7 b' The following LDAP attributes are requir'
 * The LDAP username or account used to connect to |RCE|. This will be added
   to the LDAP filter for locating the user object.
 * For example, if an LDAP filter is specified as `LDAPFILTER`,
-  the login attribute is specified as `uid`, and the user connects as
+  the login/username attribute is specified as `uid`, and the user connects as
   `jsmith`, then the LDAP Filter will be like the following example.
       
 .. code-block:: vim
@@ -68,7 +68,7 b' The following LDAP attributes are requir'
 Optional settings
 ^^^^^^^^^^^^^^^^^
 
-The following are optional when enabling LDAP on |RCM|
+The following are optional when enabling LDAP on |RCE|
  
 * An LDAP account is only required if the LDAP server does not allow
   anonymous browsing of records.
@@ -104,10 +104,4 b' The following are optional when enabling'
    following directory: `/etc/openldap/cacerts`
 
 
-Below is example setup that can be used with Active Directory and ldap groups.
-
-.. image:: ../images/ldap-groups-example.png
-   :alt: LDAP/AD setup example
-   :scale: 50 %
-
 .. _RFC 2254: http://www.rfc-base.org/rfc-2254.html
  No newline at end of file

docs/code-review/code-review.rst

@@ -3,7 +3,7 b''
 Code Review
 ===========
 
-|RCM| provides two ways in which you can review code. You can review |prs| or
+|RCE| provides two ways in which you can review code. You can review |prs| or
 commits. To better understand |prs|, see the :ref:`pull-requests-ref`
 and :ref:`collaborate-ref` sections. For more information about why
 code review matters, see these posts on the topic:

docs/code-review/review-diffs.rst

@@ -16,7 +16,7 b' review purposes.'
 Reviewing Changes
 -----------------
 
-|RCM| displays all code changes made with each commit. Removed content is
+|RCE| displays all code changes made with each commit. Removed content is
 marked in red and new content in green.
 
 .. image:: ../images/plain-diff.png

docs/collaboration/approve-pull-request.rst

@@ -10,7 +10,7 b' 3. Leave a commit message that outlines '
 4. Set the review status to :guilabel:`Approved`
 5. Select :guilabel:`Comment`
 
-If you approve the |pr|, you will be able to merge automatically if |RCM|
+If you approve the |pr|, you will be able to merge automatically if |RCE|
 detects that it can do so safely. You will see this message:
 
 :guilabel:`This pull request can be automatically merged.`

docs/collaboration/collaboration.rst

@@ -7,7 +7,7 b' Collaboration'
 
    Forking and branching does not work with |svn| |repos|.
 
-Collaboration in |RCM| is accomplished through a combination of the following
+Collaboration in |RCE| is accomplished through a combination of the following
 functions:
 
 .. only:: latex

docs/collaboration/forks-branches.rst

@@ -55,7 +55,7 b' on the web interface. To branch a |git| '
     $ git commit -a -m "ghost script: initial file"
     $ git push
 
-Once it is pushed to the |RCM| server, you can switch to the newly created
+Once it is pushed to the |RCE| server, you can switch to the newly created
 branch using the following steps:
 
 1. Select :menuselection:`Admin --> Repositories`.

docs/collaboration/mention-reviewer-function.rst

@@ -4,7 +4,7 b' Using Notifications'
 -------------------
 
 To notify users of items that require their attention you can use the mention
-function. The mention function allows you to use ``@username`` within |RCM|.
+function. The mention function allows you to use ``@username`` within |RCE|.
 The notification function can be used within the following
 items to highlight their need for attention:
   

docs/collaboration/merge-pull-request.rst

@@ -3,7 +3,7 b''
 Merge a |pr|
 ------------
 
-|RCM| can detect if it can automatically merge the changes in a |pr|. If it
+|RCE| can detect if it can automatically merge the changes in a |pr|. If it
 can, you will see the following message:
 :guilabel:`This pull request can be automatically merged.` To merge,
 click the big blue button! To enable this feature, see :ref:`server-side-merge`.
@@ -21,7 +21,7 b' messages:'
 Manual Merge a |PR|
 ^^^^^^^^^^^^^^^^^^^
 
-If |RCM| cannot safely merge the changes in a |pr|,
+If |RCE| cannot safely merge the changes in a |pr|,
 usually due to conflicts, you need to manually merge the changes on the
 command line. You can see more information for each |repo| type at the
 following links:

docs/collaboration/notifications-overview.rst

@@ -1,7 +1,7 b''
 Notifications Overview
 ----------------------
 
-|RCM| has an integrated notification system which alerts users to requests
+|RCE| has an integrated notification system which alerts users to requests
 that they have received. Notifications can occur for the following reasons:
 
 * Pull request reviews

docs/collaboration/pull-req-mgmt.rst

@@ -3,7 +3,7 b' Pull request management'
 
 .. only:: html
 
-    There are two ways of tracking |prs| within |RCM|.
+    There are two ways of tracking |prs| within |RCE|.
 
     1. :ref:`prs-your-review`
     2. :ref:`prs-per-repo`
@@ -15,7 +15,7 b' Pull requests for your review'
 
 To view pull requests for your review, use the following steps:
 
-1. From the |RCM| interface, Select
+1. From the |RCE| interface, Select
    :menuselection:`username --> Notifications`
 2. Select :guilabel:`Pull Requests`
 

docs/collaboration/review-pull-request.rst

@@ -20,7 +20,7 b' 3. Set the review status from one of the'
 4. Select Comment
 
 When the |pr| is approved by all reviewers you will be able to merge
-automatically if |RCM| detects that it can do so safely. You will see this
+automatically if |RCE| detects that it can do so safely. You will see this
 message: `This pull request can be automatically merged.`
 
 If rejected, you can fix the issues raised during review and then update the

docs/collaboration/supported-workflows.rst

@@ -1,7 +1,7 b''
 Supported Workflows
 -------------------
 
-|RCM| can be used to develop using a variety of different workflows.
+|RCE| can be used to develop using a variety of different workflows.
 
 * Centralized, using |svn|, |git|, or |hg| |repos|
 * Feature-Branch, using |git| or |hg| |repos|

docs/common.py

@@ -20,10 +20,7 b" rst_epilog = '''"
 .. |psf| replace:: Python Software Foundation
 .. |repo| replace:: repository
 .. |repos| replace:: repositories
-.. |RCI| replace:: RhodeCode Control
 .. |RCC| replace:: RhodeCode Control
-.. |RCV| replace:: RhodeCode Enterprise
-.. |RCM| replace:: RhodeCode Enterprise
 .. |RCE| replace:: RhodeCode Enterprise
 .. |RCCE| replace:: RhodeCode Community
 .. |RCEE| replace:: RhodeCode Enterprise
@@ -31,6 +28,5 b" rst_epilog = '''"
 .. |RCT| replace:: RhodeCode Tools
 .. |RCEBOLD| replace:: **RhodeCode Enterprise**
 .. |RCEITALICS| replace:: `RhodeCode Enterprise`
-.. |RC| replace:: RhodeCode
 .. |RNS| replace:: Release Notes
 '''

docs/extensions/extensions-hooks.rst

@@ -18,7 +18,7 b' so to clarify what is meant each time, r'
 Hooks
 -----
 
-Within |RCM| there are two types of supported hooks.
+Within |RCE| there are two types of supported hooks.
 
 * **Internal built-in hooks**: The internal |hg|, |git| or |svn| hooks are
   triggered by different VCS operations, like push, pull,

docs/index.rst

@@ -1,13 +1,13 b''
-|RCM|
+|RCE|
 =====
 
-|RCM| is a high-performance source code management and collaboration system.
+|RCE| is a high-performance source code management and collaboration system.
 It enables you to develop projects securely behind the firewall while
 providing collaboration tools that work with |git|, |hg|,
 and |svn| |repos|. The user interface allows you to create, edit,
 and commit files and |repos| while managing their security permissions.
 
-|RCM| provides the following features:
+|RCE| provides the following features:
 
 * Source code management.
 * Extended permissions management.
@@ -18,7 +18,7 b' and commit files and |repos| while manag'
 * Web-based hook management.
 * Native |svn| support.
 * Migration from existing databases.
-* |RCM| SDK.
+* |RCE| SDK.
 * Built-in analytics
 * Built in integrations including: Slack, Webhooks (used for Jenkins/TeamCity and other CIs), Jira, Redmine, Hipchat
 * Pluggable authentication system.

docs/install/install-database.rst

@@ -5,8 +5,24 b' Supported Databases'
 
 .. important::
 
-   We do not recommend using SQLite in a production environment. It is
-   supported by |RCE| for evaluation purposes.
+   We do not recommend using SQLite in a production environment of more than 5 people.
+   It is not suited for higher usage and mayb cause problems.
+
+
+|RCE| supports the following databases. The recommended encoding is UTF-8.
+
+.. only:: latex
+
+   * :ref:`install-sqlite-database`
+   * :ref:`install-mysql-database`
+   * :ref:`install-postgresql-database`
+
+.. toctree::
+
+   using-mysql
+   using-postgresql
+   using-sqllite
+
 
 Database Overview
 -----------------
@@ -48,21 +64,3 b' following example to configure the corre'
      # for the RCE instance you are installing
      Database name: example-db-name-for-2xx # The 2xx version database
      Database name: example-db-name-for-3xx # The 3xx version database
-
-Supported Databases
--------------------
-
-|RCM| supports the following databases. The recommended encoding is Unicode
-UTF-8.
-
-.. only:: latex
-
-   * :ref:`install-sqlite-database`
-   * :ref:`install-mysql-database`
-   * :ref:`install-postgresql-database`
-
-.. toctree::
-
-   using-mysql
-   using-postgresql
-   using-sqllite

docs/install/install-steps.rst

@@ -4,7 +4,7 b' Post Installation Tasks'
 =======================
 
 The following tasks are the most common post installation requirements. Use
-the information in these sections to configure your instance of |RCM|.
+the information in these sections to configure your instance of |RCE|.
 
 .. toctree::
 

docs/install/migrate-repos.rst

@@ -3,21 +3,21 b''
 Migrating |repos|
 -----------------
 
-If you have installed |RCM| and have |repos| that you wish to migrate into
+If you have installed |RCE| and have |repos| that you wish to migrate into
 the system, use the following instructions.
 
-1. On the |RCM| interface, check your |repo| storage location under
+1. On the |RCE| interface, check your |repo| storage location under
    :menuselection:`Admin --> Settings --> System Info`. For example,
    Storage location: /home/{username}/repos.
 
-2. Copy the |repos| that you want |RCM| to manage to this location.
+2. Copy the |repos| that you want |RCE| to manage to this location.
 3. Remap and rescan the |repos|, see :ref:`remap-rescan`
 
 .. important::
 
-   Directories create |repo| groups inside |RCM|.
+   Directories create |repo| groups inside |RCE|.
 
-   Importing adds |RCM| git hooks to your |repos|.
+   Importing adds |RCE| git hooks to your |repos|.
 
    You should verify if custom ``.hg`` or ``.hgrc`` files inside
-   repositories should be adjusted since |RCM| reads the content of them.
+   repositories should be adjusted since |RCE| reads the content of them.

docs/install/quick-start.rst

@@ -27,9 +27,12 b' 2. Run the |RCC| installer and accept th'
 
 .. code-block:: bash
 
-    $ chmod 755 RhodeCode-installer-linux-*
+    $ chmod +x RhodeCode-installer-linux-*
     $ ./RhodeCode-installer-linux-*
 
+    Do you accept the RhodeCode Control license?
+    Press [Y] to accept license and [V] to view license text: y
+
 3. Install a VCS Server, and configure it to start at boot.
 
 .. code-block:: bash

docs/install/setup-email.rst

@@ -3,12 +3,12 b''
 Set up Email
 ------------
 
-To setup email with your |RCM| instance, open the default
+To setup email with your |RCE| instance, open the default
 :file:`/home/{user}/.rccontrol/{instance-id}/rhodecode.ini`
 file and uncomment and configure the email section. If it is not there,
 use the below example to insert it.
 
-Once configured you can check the settings for your |RCM| instance on the
+Once configured you can check the settings for your |RCE| instance on the
 :menuselection:`Admin --> Settings --> Email` page.
 
 .. code-block:: ini

docs/install/using-mysql.rst

@@ -4,15 +4,15 b' MySQL or MariaDB'
 ----------------
 
 To use a MySQL or MariaDB database you should install and configure the
-database before installing |RCM|. This is because during |RCM| installation
+database before installing |RCE|. This is because during |RCE| installation
 you will setup a connection to your MySQL or MariaDB database. To work with
 either, use the following steps:
 
 1. Depending on your |os|, install a MySQL or MariaDB database following the
    appropriate instructions from the `MySQL website`_ or `MariaDB website`_.
 2. Configure the database with a username and password which you will use
-   with |RCM|.
-3. Install |RCM|, and during installation select MySQL as your database.
+   with |RCE|.
+3. Install |RCE|, and during installation select MySQL as your database.
 4. Enter the following information during the database setup:
 
    * Your network IP Address

docs/install/using-postgresql.rst

@@ -4,15 +4,15 b' PostgreSQL'
 ----------
 
 To use a PostgreSQL database, you should install and configure the database
-before installing |RCV|. This is because during |RCV| installation you will
+before installing |RCE|. This is because during |RCE| installation you will
 setup the connection to your PostgreSQL database. To work with PostgreSQL,
 use the following steps:
 
 1. Depending on your |os|, install a PostgreSQL database following the
    appropriate instructions from the `PostgreSQL website`_.
 2. Configure the database with a username and password, which you will use
-   with |RCV|.
-3. Install |RCV|, and during installation select PostgreSQL as your database.
+   with |RCE|.
+3. Install |RCE|, and during installation select PostgreSQL as your database.
 4. Enter the following information during the database setup:
 
    * Your network IP Address

docs/install/using-sqllite.rst

@@ -9,15 +9,15 b' SQLite'
     as it has an internal locking mechanism which can become a performance
     bottleneck when there are more than 5 concurrent users.
 
-|RCM| installs SQLite as the default database if you do not specify another
+|RCE| installs SQLite as the default database if you do not specify another
 during installation. SQLite is suitable for small teams,
 projects with a low load, and evaluation purposes since it is built into
-|RCM| and does not require any additional database server.
+|RCE| and does not require any additional database server.
 
 Using MySQL or PostgreSQL in an large setup gives you much greater
 performance, and while migration tools exist to move from one database type
 to another, it is better to get it right first time and to immediately use
-MySQL or PostgreSQL when you deploy |RCM| in a production environment.
+MySQL or PostgreSQL when you deploy |RCE| in a production environment.
 
 Migrating From SQLite to PostgreSQL
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

docs/integrations/integrations.rst

@@ -11,9 +11,9 b' different Slack channels, for example.'
 Supported integrations
 ^^^^^^^^^^^^^^^^^^^^^^
 
-================================    ============    ========================================
-Type/Name                           |RC| Edition    Description
-================================    ============    ========================================
+================================    ==================    ========================================
+Type/Name                           RhodeCode Edition     Description
+================================    ==================    ========================================
 :ref:`integrations-webhook`         |RCCEshort|     Trigger events as `json` to a custom url
 :ref:`integrations-slack`           |RCCEshort|     Integrate with https://slack.com/
 :ref:`integrations-hipchat`         |RCCEshort|     Integrate with https://www.hipchat.com/
@@ -24,7 +24,7 b' Type/Name |RC|'
 :ref:`integrations-jenkins`         |RCEEshort|     Trigger Builds for Jenkins CI System
 :ref:`integrations-redmine`         |RCEEshort|     Close/Resolve/Reference Redmine issues
 :ref:`integrations-jira`            |RCEEshort|     Close/Resolve/Reference JIRA issues
-================================    ============    ========================================
+================================    ==================    ========================================
 
 .. _creating-integrations:
 

docs/issue-trackers/issue-trackers.rst

@@ -9,7 +9,7 b' You can set an issue tracker connection '
 * At the |repo| level, you can configure an integration with a different issue
   tracker.
 
-To integrate |RCM| with an issue tracker, you need to define a regular
+To integrate |RCE| with an issue tracker, you need to define a regular
 expression that will fetch the issue ID stored in commit messages, and replace
 it with a URL. This enables |RCE| to generate a link matching each issue to the
 target |repo|.

docs/known-issues/error-msg-guide.rst

@@ -7,7 +7,7 b' Error Message'
 Error creating repository repo-name
 
 Cause
-As of |RCM| 3.0, a VCS Server is required to run backend operations.
+As of |RCE| 3.0, a VCS Server is required to run backend operations.
 
 Solution
 Install a VCS Server. See the `Install a VCS Server`_ section of |RCC|

docs/nix/nix.rst

@@ -3,7 +3,7 b''
 Nix Packaging
 =============
 
-|RCM| is installed using |Nix Package Manager|. The Nix environment provides
+|RCE| is installed using |Nix Package Manager|. The Nix environment provides
 the following features for maintenance and deployment:
 
 * Atomic upgrades and rollbacks

docs/release-notes/release-notes-3.0.0.rst

@@ -1,7 +1,7 b''
 |RCE| 3.0.0 |RNS|
 -----------------
 
-As |RCM| 3.0 is a big release, the release notes have been split into the following sections:
+As |RCE| 3.0 is a big release, the release notes have been split into the following sections:
 
 * :ref:`general-rn-ref`
 * :ref:`security-rn-ref`

docs/tools/install-tools.rst

@@ -44,10 +44,10 b' following example:'
 Installing |RCT|
 ^^^^^^^^^^^^^^^^
 
-|RCT| enable you to automate many of the most common |RCM| functions through
+|RCT| enable you to automate many of the most common |RCE| functions through
 the API. Installing them on a local machine lets you carry out maintenance on
 the server remotely. Once installed you can use them to index your |repos|
-to setup full-text search, strip commits, or install |RC| Extensions for
+to setup full-text search, strip commits, or install RhodeCode Extensions for
 additional functionality.
 
 For more detailed instructions about using |RCT| for indexing and full-text

docs/tools/rhodecode-tools.rst

@@ -3,7 +3,7 b''
 |RCT|
 =====
 
-|RCT| enable you to automate many of the most common |RCM| functions through
+|RCT| enable you to automate many of the most common |RCE| functions through
 the API.
 
 .. toctree::

docs/tools/tools-cli.rst

@@ -16,7 +16,7 b' rhodecode-tools'
 ---------------
 
 Use |RCT| to setup automation, run the indexer, and install extensions for
-your |RCM| instances. Options:
+your |RCE| instances. Options:
 
 .. rst-class:: dl-horizontal
 
@@ -49,7 +49,7 b' Example usage:'
 rhodecode-api
 -------------
 
-The |RC| API lets you connect to |RCE| and carry out management tasks from a
+The RhodeCode API lets you connect to |RCE| and carry out management tasks from a
 remote machine, for more information about the API, see the :ref:`api`. To
 pass arguments on the command-line use the ``method:option`` syntax.
 
@@ -117,7 +117,7 b' Options:'
 rhodecode-cleanup-gists
 -----------------------
 
-Use this to delete gists within |RCM|. Options:
+Use this to delete gists within |RCE|. Options:
 
 .. rst-class:: dl-horizontal
 
@@ -166,7 +166,7 b' Example usage:'
 rhodecode-cleanup-repos
 -----------------------
 
-Use this to manage |repos| and |repo| groups within |RCM|. Options:
+Use this to manage |repos| and |repo| groups within |RCE|. Options:
 
 .. rst-class:: dl-horizontal
 
@@ -280,7 +280,7 b' the using :ref:`integrations-rcextension'
 rhodecode-gist
 --------------
 
-Use this to create, list, show, or delete gists within |RCM|. Options:
+Use this to create, list, show, or delete gists within |RCE|. Options:
 
 .. rst-class:: dl-horizontal
 

docs/tools/tools-overview.rst

@@ -7,7 +7,7 b' To install |RCT| correctly, see the inst'
 :ref:`install-tools`, and :ref:`config-rhoderc`.
 
 Once |RCT| is installed, and the :file:`/home/{user}/.rhoderc` file is
-configured you can then use |RCT| on each |RCM| instance to carry out admin
+configured you can then use |RCT| on each |RCE| instance to carry out admin
 tasks. Use the following example to configure that file,
 and once configured see the :ref:`tools-cli` for more details.
 

docs/tutorials/deploy-from-host.rst

@@ -95,10 +95,10 b' but below is the example shortcut.'
 
     # Check that the script is uploaded to your home directory
     $ ls -1
-    RhodeCode-installer-linux-391_b1a804c4d69b_d6c087d520e3
+    RhodeCode-installer-linux-buildYYYYXXXX_ZZZZ
 
     # Change the script permissions
-    $ chmod 755 RhodeCode-installer-linux*
+    $ chmod +x RhodeCode-installer-linux*
 
     # Run the installer and accept the prompts
     $ ./RhodeCode-installer-linux-*

docs/tutorials/git-lfs-ext.rst

@@ -7,13 +7,13 b''
 Git Large File Storage (or LFS) is a new, open-source extension to Git that
 aims to improve handling of large files. It does this by replacing large files
 in your repository—such as graphics and videos—with simple text pointers.
-|RC| Server includes an embedded LFS object store server, allowing storage of
+RhodeCode Server includes an embedded LFS object store server, allowing storage of
 large files without the need for an external object store.
 Git LFS is disabled by default, globally, and for each individual repository.
 
 .. note::
 
-    |RC| implements V2 API of Git LFS. Please make sure your git client is
+    RhodeCode implements V2 API of Git LFS. Please make sure your git client is
     using the latest version (2.0.X recommended) to leverage full feature set
     of the V2 API.
 
@@ -22,7 +22,7 b' Git LFS is disabled by default, globally'
 Enabling Git LFS
 ++++++++++++++++
 
-Git LFS is disabled by default within |RC| Server.
+Git LFS is disabled by default within RhodeCode Server.
 
 To enable Git LFS Globally:
 
@@ -87,7 +87,7 b' size in bytes. For example::'
 
 
 The object itself will be uploaded to a separate location via the Git LFS Batch API.
-The transfer is validated and authorized by |RC| server itself.
+The transfer is validated and authorized by RhodeCode server itself.
 
 If give repository has Git LFS disabled, a proper message will be sent back to
 the client and upload of LFS objects will be forbidden.

docs/tutorials/hg-large-ext.rst

@@ -13,7 +13,7 b' of the current revision. This saves both'
 Enabling HG Largefiles
 ++++++++++++++++++++++
 
-Mercurial Largefiles extension is disabled by default within |RC| Server.
+Mercurial Largefiles extension is disabled by default within RhodeCode Server.
 
 To enable Mercurial Largefiles Globally:
 

docs/tutorials/windows-to-linux.rst

@@ -25,7 +25,7 b' Pre-requisites'
 * For MySQL, do not use `localhost` in the database connection string of the
   :file:`rhodecode.ini` file.
 * InnoDB must be the database tables engine.
-* Contact |RC| for a new licence Key/Token pair. If you don't, a trial licence
+* Contact RhodeCode for a new licence Key/Token pair. If you don't, a trial licence
   will be applied so you are not locked out of the upgraded instance.
 
 You can find the specific instructions to carry out these pre-requisite steps

docs/usage/basic-vcs-commands.rst

@@ -3,19 +3,19 b''
 Getting Started with VCS
 ------------------------
 
-When using |RCM|, you will be working with |git|, |svn| or |hg| |repos| from the
+When using |RCE|, you will be working with |git|, |svn| or |hg| |repos| from the
 command line or using a GUI client such as Tortoise, Tower or SourceTree.
 
-|RCM| uses a standard |git|, |svn| and |hg| protocols. So all tools that
+|RCE| uses a standard |git|, |svn| and |hg| protocols. So all tools that
 can interact with there protocols are supported, including Eclipse or PyCharm
 plugins.
 
 
 If you have never used either before, the following information should
 help you set up your local machine so that you can sync changes with the
-|RCM| server.
+|RCE| server.
 
-All of the following instructions assume you have a |RCM| account,
+All of the following instructions assume you have a |RCE| account,
 and you can access your |repos| from the web interface.
 
 .. note::

docs/usage/file-editing.rst

@@ -3,14 +3,14 b' File Editing'
 
 To edit files using the online editor, use the following steps.
 
-1. From the |RCM| interface, select :menuselection:`Admin --> Repositories`
+1. From the |RCE| interface, select :menuselection:`Admin --> Repositories`
 2. Select the |repo| in which you want to edit a file.
 3. Select the :guilabel:`file` view of the |repo|, and double-click on the file.
 4. To open the editor, select the :guilabel:`edit on branch:default` button.
 
-   * If the filename has an extension |RCM| recognises,
+   * If the filename has an extension |RCE| recognises,
      the syntax highlighting will appear automatically.
-   * If the filename does not have an extension |RCM| recognises,
+   * If the filename does not have an extension |RCE| recognises,
      you can set the language syntax highlighter by
      choosing from the file type drop down menu.
 5. To save your changes, select :guilabel:`Commit changes`

docs/usage/gist-editing.rst

@@ -4,7 +4,7 b' Gist Editing'
 ^^^^^^^^^^^^
 
 Gists are standalone files that only the creator can edit. To work with
-gists, click on the :guilabel:`Gists` tab on the |RCM| header. The gist
+gists, click on the :guilabel:`Gists` tab on the |RCE| header. The gist
 editor also has syntax highlighting.
 
 You can set the following properties for each gist:
@@ -13,7 +13,7 b' You can set the following properties for'
   and will show up in searches.
 * :guilabel:`Gist Lifetime`: You can set a gist to expire after a set
   period by using the :guilabel:`Gist Lifetime` dropdown menu.
-  This means that when the gist expires it will be deleted from the |RCM|
+  This means that when the gist expires it will be deleted from the |RCE|
   gist database.
 * :guilabel:`Private`: This means that the gist will not show up in searches.
 * :guilabel:`Gist access level`: If you create a private gist you can have

docs/usage/online-editing.rst

@@ -1,7 +1,7 b''
 Online Editing
 --------------
 
-|RCM| has an integrated online editor, allowing you to edit files in the
+|RCE| has an integrated online editor, allowing you to edit files in the
 browser. The online editor has syntax highlighting and the ability to fork,
 merge, and commit changes to files.
 

rhodecode/authentication/plugins/auth_ldap.py

@@ -249,7 +249,7 b' class LdapSettingsSchema(AuthnPluginSett'
         colander.Int(),
         default=389,
         description=_('Custom port that the LDAP server is listening on. '
-                      'Default value is: 389'),
+                      'Default value is: 389, use 689 for LDAPS(SSL)'),
         preparer=strip_whitespace,
         title=_('Port'),
         validator=colander.Range(min=0, max=65536),

rhodecode/public/css/type.less

@@ -534,7 +534,7 b' address {'
   color: @grey4;
   font-family: @text-light;
   &.pre-formatting {
-      white-space: pre;
+      white-space: pre-wrap;
   }
 }
 

rhodecode/templates/admin/auth/plugin_settings.mako

@@ -97,6 +97,18 b''
                 ${h.end_form()}
               </div>
             </div>
+
+% if request.GET.get('schema'):
+## this is for development and creation of example configurations for documentation
+<pre>
+    % for node in plugin.get_settings_schema():
+    *option*: `${node.name}` => `${defaults.get(node.name)}`${'\n    # '.join(['']+node.description.splitlines())}
+
+    % endfor
+</pre>
+
+% endif
+
           </div>
         </div>
       </div>
@@ -104,8 +116,7 b''
     </div>
   </div>
 
-## TODO: Ugly hack to get ldap select elements to work.
-##       Find a solution to integrate this nicely.
+
 <script>
 $(document).ready(function() {
   var select2Options = {