##// END OF EJS Templates
gunicorn: updated config template with better compatability with configparser
gunicorn: updated config template with better compatability with configparser

File last commit:

r3947:235a26df default
r4167:a57c25da default
Show More
rhodecode.ini
664 lines | 22.6 KiB | text/x-ini | IniLexer
################################################################################
## RHODECODE COMMUNITY EDITION CONFIGURATION ##
# The %(here)s variable will be replaced with the parent directory of this file#
################################################################################
[DEFAULT]
debug = true
################################################################################
## EMAIL CONFIGURATION ##
## Uncomment and replace with the email address which should receive ##
## any error reports after an application crash ##
## Additionally these settings will be used by the RhodeCode mailing system ##
################################################################################
## prefix all emails subjects with given prefix, helps filtering out emails
#email_prefix = [RhodeCode]
## email FROM address all mails will be sent
#app_email_from = rhodecode-noreply@localhost
## Uncomment and replace with the address which should receive any error report
## note: using appenlight for error handling doesn't need this to be uncommented
#email_to = admin@localhost
#smtp_server = mail.server.com
#smtp_username =
#smtp_password =
#smtp_port =
#smtp_use_tls = false
#smtp_use_ssl = true
[server:main]
## COMMON ##
host = 0.0.0.0
port = 5000
##########################
## GUNICORN WSGI SERVER ##
##########################
## run with gunicorn --log-config rhodecode.ini --paste rhodecode.ini
use = egg:gunicorn#main
## Sets the number of process workers. You must set `instance_id = *`
## when this option is set to more than one worker, recommended
## value is (2 * NUMBER_OF_CPUS + 1), eg 2CPU = 5 workers
## The `instance_id = *` must be set in the [app:main] section below
#workers = 2
## number of threads for each of the worker, must be set to 1 for gevent
## generally recommened to be at 1
#threads = 1
## process name
#proc_name = rhodecode
## type of worker class, one of sync, gevent
## recommended for bigger setup is using of of other than sync one
#worker_class = sync
## The maximum number of simultaneous clients. Valid only for Gevent
#worker_connections = 10
## max number of requests that worker will handle before being gracefully
## restarted, could prevent memory leaks
#max_requests = 1000
#max_requests_jitter = 30
## amount of time a worker can spend with handling a request before it
## gets killed and restarted. Set to 6hrs
#timeout = 21600
## prefix middleware for RhodeCode.
## recommended when using proxy setup.
## allows to set RhodeCode under a prefix in server.
## eg https://server.com/custom_prefix. Enable `filter-with =` option below as well.
## And set your prefix like: `prefix = /custom_prefix`
## be sure to also set beaker.session.cookie_path = /custom_prefix if you need
## to make your cookies only work on prefix url
[filter:proxy-prefix]
use = egg:PasteDeploy#prefix
prefix = /
[app:main]
is_test = True
use = egg:rhodecode-enterprise-ce
## enable proxy prefix middleware, defined above
#filter-with = proxy-prefix
## RHODECODE PLUGINS ##
rhodecode.includes = rhodecode.api
# api prefix url
rhodecode.api.url = /_admin/api
## END RHODECODE PLUGINS ##
## encryption key used to encrypt social plugin tokens,
## remote_urls with credentials etc, if not set it defaults to
## `beaker.session.secret`
#rhodecode.encrypted_values.secret =
## decryption strict mode (enabled by default). It controls if decryption raises
## `SignatureVerificationError` in case of wrong key, or damaged encryption data.
#rhodecode.encrypted_values.strict = false
## return gzipped responses from Rhodecode (static files/application)
gzip_responses = false
## autogenerate javascript routes file on startup
generate_js_files = false
## Optional Languages
## en(default), be, de, es, fr, it, ja, pl, pt, ru, zh
lang = en
## perform a full repository scan on each server start, this should be
## set to false after first startup, to allow faster server restarts.
startup.import_repos = true
## Uncomment and set this path to use archive download cache.
## Once enabled, generated archives will be cached at this location
## and served from the cache during subsequent requests for the same archive of
## the repository.
#archive_cache_dir = /tmp/tarballcache
## URL at which the application is running. This is used for bootstraping
## requests in context when no web request is available. Used in ishell, or
## SSH calls. Set this for events to receive proper url for SSH calls.
app.base_url = http://rhodecode.local
## change this to unique ID for security
app_instance_uuid = rc-production
## cut off limit for large diffs (size in bytes)
cut_off_limit_diff = 1024000
cut_off_limit_file = 256000
## use cache version of scm repo everywhere
vcs_full_cache = false
## force https in RhodeCode, fixes https redirects, assumes it's always https
## Normally this is controlled by proper http flags sent from http server
force_https = false
## use Strict-Transport-Security headers
use_htsts = false
# Set to true if your repos are exposed using the dumb protocol
git_update_server_info = false
## RSS/ATOM feed options
rss_cut_off_limit = 256000
rss_items_per_page = 10
rss_include_diff = false
## gist URL alias, used to create nicer urls for gist. This should be an
## url that does rewrites to _admin/gists/{gistid}.
## example: http://gist.rhodecode.org/{gistid}. Empty means use the internal
## RhodeCode url, ie. http[s]://rhodecode.server/_admin/gists/{gistid}
gist_alias_url =
## List of views (using glob pattern syntax) that AUTH TOKENS could be
## used for access.
## Adding ?auth_token=TOKEN_HASH to the url authenticates this request as if it
## came from the the logged in user who own this authentication token.
## Additionally @TOKEN syntaxt can be used to bound the view to specific
## authentication token. Such view would be only accessible when used together
## with this authentication token
##
## list of all views can be found under `/_admin/permissions/auth_token_access`
## The list should be "," separated and on a single line.
##
## Most common views to enable:
# RepoCommitsView:repo_commit_download
# RepoCommitsView:repo_commit_patch
# RepoCommitsView:repo_commit_raw
# RepoCommitsView:repo_commit_raw@TOKEN
# RepoFilesView:repo_files_diff
# RepoFilesView:repo_archivefile
# RepoFilesView:repo_file_raw
# GistView:*
api_access_controllers_whitelist =
## default encoding used to convert from and to unicode
## can be also a comma separated list of encoding in case of mixed encodings
default_encoding = UTF-8
## instance-id prefix
## a prefix key for this instance used for cache invalidation when running
## multiple instances of rhodecode, make sure it's globally unique for
## all running rhodecode instances. Leave empty if you don't use it
instance_id =
## Fallback authentication plugin. Set this to a plugin ID to force the usage
## of an authentication plugin also if it is disabled by it's settings.
## This could be useful if you are unable to log in to the system due to broken
## authentication settings. Then you can enable e.g. the internal rhodecode auth
## module to log in again and fix the settings.
##
## Available builtin plugin IDs (hash is part of the ID):
## egg:rhodecode-enterprise-ce#rhodecode
## egg:rhodecode-enterprise-ce#pam
## egg:rhodecode-enterprise-ce#ldap
## egg:rhodecode-enterprise-ce#jasig_cas
## egg:rhodecode-enterprise-ce#headers
## egg:rhodecode-enterprise-ce#crowd
#rhodecode.auth_plugin_fallback = egg:rhodecode-enterprise-ce#rhodecode
## alternative return HTTP header for failed authentication. Default HTTP
## response is 401 HTTPUnauthorized. Currently HG clients have troubles with
## handling that causing a series of failed authentication calls.
## Set this variable to 403 to return HTTPForbidden, or any other HTTP code
## This will be served instead of default 401 on bad authnetication
auth_ret_code =
## use special detection method when serving auth_ret_code, instead of serving
## ret_code directly, use 401 initially (Which triggers credentials prompt)
## and then serve auth_ret_code to clients
auth_ret_code_detection = false
## locking return code. When repository is locked return this HTTP code. 2XX
## codes don't break the transactions while 4XX codes do
lock_ret_code = 423
## allows to change the repository location in settings page
allow_repo_location_change = true
## allows to setup custom hooks in settings page
allow_custom_hooks_settings = true
## generated license token, goto license page in RhodeCode settings to obtain
## new token
license_token = abra-cada-bra1-rce3
## supervisor connection uri, for managing supervisor and logs.
supervisor.uri =
## supervisord group name/id we only want this RC instance to handle
supervisor.group_id = dev
## Display extended labs settings
labs_settings_active = true
####################################
### CELERY CONFIG ####
####################################
use_celery = false
broker.host = localhost
broker.vhost = rabbitmqhost
broker.port = 5672
broker.user = rabbitmq
broker.password = qweqwe
celery.imports = rhodecode.lib.celerylib.tasks
celery.result.backend = amqp
celery.result.dburi = amqp://
celery.result.serialier = json
#celery.send.task.error.emails = true
#celery.amqp.task.result.expires = 18000
celeryd.concurrency = 2
#celeryd.log.file = celeryd.log
celeryd.log.level = debug
celeryd.max.tasks.per.child = 1
## tasks will never be sent to the queue, but executed locally instead.
celery.always.eager = false
####################################
### BEAKER CACHE ####
####################################
# default cache dir for templates. Putting this into a ramdisk
## can boost performance, eg. %(here)s/data_ramdisk
cache_dir = %(here)s/data
## locking and default file storage for Beaker. Putting this into a ramdisk
## can boost performance, eg. %(here)s/data_ramdisk/cache/beaker_data
beaker.cache.data_dir = %(here)s/rc/data/cache/beaker_data
beaker.cache.lock_dir = %(here)s/rc/data/cache/beaker_lock
beaker.cache.regions = long_term
beaker.cache.long_term.type = memory
beaker.cache.long_term.expire = 36000
beaker.cache.long_term.key_length = 256
#####################################
### DOGPILE CACHE ####
#####################################
## permission tree cache settings
rc_cache.cache_perms.backend = dogpile.cache.rc.file_namespace
rc_cache.cache_perms.expiration_time = 0
rc_cache.cache_perms.arguments.filename = /tmp/rc_cache_1
## cache settings for SQL queries
rc_cache.sql_cache_short.backend = dogpile.cache.rc.memory_lru
rc_cache.sql_cache_short.expiration_time = 0
####################################
### BEAKER SESSION ####
####################################
## .session.type is type of storage options for the session, current allowed
## types are file, ext:memcached, ext:database, and memory (default).
beaker.session.type = file
beaker.session.data_dir = %(here)s/rc/data/sessions/data
## db based session, fast, and allows easy management over logged in users
#beaker.session.type = ext:database
#beaker.session.table_name = db_session
#beaker.session.sa.url = postgresql://postgres:secret@localhost/rhodecode
#beaker.session.sa.url = mysql://root:secret@127.0.0.1/rhodecode
#beaker.session.sa.pool_recycle = 3600
#beaker.session.sa.echo = false
beaker.session.key = rhodecode
beaker.session.secret = test-rc-uytcxaz
beaker.session.lock_dir = %(here)s/rc/data/sessions/lock
## Secure encrypted cookie. Requires AES and AES python libraries
## you must disable beaker.session.secret to use this
#beaker.session.encrypt_key = key_for_encryption
#beaker.session.validate_key = validation_key
## sets session as invalid(also logging out user) if it haven not been
## accessed for given amount of time in seconds
beaker.session.timeout = 2592000
beaker.session.httponly = true
## Path to use for the cookie. Set to prefix if you use prefix middleware
#beaker.session.cookie_path = /custom_prefix
## uncomment for https secure cookie
beaker.session.secure = false
## auto save the session to not to use .save()
beaker.session.auto = false
## default cookie expiration time in seconds, set to `true` to set expire
## at browser close
#beaker.session.cookie_expires = 3600
###################################
## SEARCH INDEXING CONFIGURATION ##
###################################
## Full text search indexer is available in rhodecode-tools under
## `rhodecode-tools index` command
## WHOOSH Backend, doesn't require additional services to run
## it works good with few dozen repos
search.module = rhodecode.lib.index.whoosh
search.location = %(here)s/data/index
########################################
### CHANNELSTREAM CONFIG ####
########################################
## channelstream enables persistent connections and live notification
## in the system. It's also used by the chat system
channelstream.enabled = false
## server address for channelstream server on the backend
channelstream.server = 127.0.0.1:9800
## location of the channelstream server from outside world
## use ws:// for http or wss:// for https. This address needs to be handled
## by external HTTP server such as Nginx or Apache
## see nginx/apache configuration examples in our docs
channelstream.ws_url = ws://rhodecode.yourserver.com/_channelstream
channelstream.secret = secret
channelstream.history.location = %(here)s/channelstream_history
## Internal application path that Javascript uses to connect into.
## If you use proxy-prefix the prefix should be added before /_channelstream
channelstream.proxy_path = /_channelstream
###################################
## APPENLIGHT CONFIG ##
###################################
## Appenlight is tailored to work with RhodeCode, see
## http://appenlight.com for details how to obtain an account
## appenlight integration enabled
appenlight = false
appenlight.server_url = https://api.appenlight.com
appenlight.api_key = YOUR_API_KEY
#appenlight.transport_config = https://api.appenlight.com?threaded=1&timeout=5
# used for JS client
appenlight.api_public_key = YOUR_API_PUBLIC_KEY
## TWEAK AMOUNT OF INFO SENT HERE
## enables 404 error logging (default False)
appenlight.report_404 = false
## time in seconds after request is considered being slow (default 1)
appenlight.slow_request_time = 1
## record slow requests in application
## (needs to be enabled for slow datastore recording and time tracking)
appenlight.slow_requests = true
## enable hooking to application loggers
appenlight.logging = true
## minimum log level for log capture
appenlight.logging.level = WARNING
## send logs only from erroneous/slow requests
## (saves API quota for intensive logging)
appenlight.logging_on_error = false
## list of additonal keywords that should be grabbed from environ object
## can be string with comma separated list of words in lowercase
## (by default client will always send following info:
## 'REMOTE_USER', 'REMOTE_ADDR', 'SERVER_NAME', 'CONTENT_TYPE' + all keys that
## start with HTTP* this list be extended with additional keywords here
appenlight.environ_keys_whitelist =
## list of keywords that should be blanked from request object
## can be string with comma separated list of words in lowercase
## (by default client will always blank keys that contain following words
## 'password', 'passwd', 'pwd', 'auth_tkt', 'secret', 'csrf'
## this list be extended with additional keywords set here
appenlight.request_keys_blacklist =
## list of namespaces that should be ignores when gathering log entries
## can be string with comma separated list of namespaces
## (by default the client ignores own entries: appenlight_client.client)
appenlight.log_namespace_blacklist =
################################################################################
## WARNING: *THE LINE BELOW MUST BE UNCOMMENTED ON A PRODUCTION ENVIRONMENT* ##
## Debug mode will enable the interactive debugging tool, allowing ANYONE to ##
## execute malicious code after an exception is raised. ##
################################################################################
set debug = false
##############
## STYLING ##
##############
debug_style = false
###########################################
### MAIN RHODECODE DATABASE CONFIG ###
###########################################
#sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode_test.db?timeout=30
#sqlalchemy.db1.url = postgresql://postgres:qweqwe@localhost/rhodecode_test
#sqlalchemy.db1.url = mysql://root:qweqwe@localhost/rhodecode_test
sqlalchemy.db1.url = sqlite:///%(here)s/rhodecode_test.db?timeout=30
# see sqlalchemy docs for other advanced settings
## print the sql statements to output
sqlalchemy.db1.echo = false
## recycle the connections after this amount of seconds
sqlalchemy.db1.pool_recycle = 3600
## the number of connections to keep open inside the connection pool.
## 0 indicates no limit
#sqlalchemy.db1.pool_size = 5
## the number of connections to allow in connection pool "overflow", that is
## connections that can be opened above and beyond the pool_size setting,
## which defaults to five.
#sqlalchemy.db1.max_overflow = 10
##################
### VCS CONFIG ###
##################
vcs.server.enable = true
vcs.server = localhost:9901
## Web server connectivity protocol, responsible for web based VCS operatations
## Available protocols are:
## `http` - use http-rpc backend (default)
vcs.server.protocol = http
## Push/Pull operations protocol, available options are:
## `http` - use http-rpc backend (default)
## `vcsserver.scm_app` - internal app (EE only)
vcs.scm_app_implementation = http
## Push/Pull operations hooks protocol, available options are:
## `http` - use http-rpc backend (default)
vcs.hooks.protocol = http
vcs.hooks.host = 127.0.0.1
vcs.server.log_level = debug
## Start VCSServer with this instance as a subprocess, Useful for development
vcs.start_server = false
## List of enabled VCS backends, available options are:
## `hg` - mercurial
## `git` - git
## `svn` - subversion
vcs.backends = hg, git, svn
vcs.connection_timeout = 3600
## Compatibility version when creating SVN repositories. Defaults to newest version when commented out.
## Available options are: pre-1.4-compatible, pre-1.5-compatible, pre-1.6-compatible, pre-1.8-compatible, pre-1.9-compatible
#vcs.svn.compatible_version = pre-1.8-compatible
############################################################
### Subversion proxy support (mod_dav_svn) ###
### Maps RhodeCode repo groups into SVN paths for Apache ###
############################################################
## Enable or disable the config file generation.
svn.proxy.generate_config = false
## Generate config file with `SVNListParentPath` set to `On`.
svn.proxy.list_parent_path = true
## Set location and file name of generated config file.
svn.proxy.config_file_path = %(here)s/mod_dav_svn.conf
## Used as a prefix to the `Location` block in the generated config file.
## In most cases it should be set to `/`.
svn.proxy.location_root = /
## Command to reload the mod dav svn configuration on change.
## Example: `/etc/init.d/apache2 reload`
#svn.proxy.reload_cmd = /etc/init.d/apache2 reload
## If the timeout expires before the reload command finishes, the command will
## be killed. Setting it to zero means no timeout. Defaults to 10 seconds.
#svn.proxy.reload_timeout = 10
############################################################
### SSH Support Settings ###
############################################################
## Defines if the authorized_keys file should be written on any change of
## user ssh keys, setting this to false also disables posibility of adding
## ssh keys for users from web interface.
ssh.generate_authorized_keyfile = true
## Options for ssh, default is `no-pty,no-port-forwarding,no-X11-forwarding,no-agent-forwarding`
# ssh.authorized_keys_ssh_opts =
## File to generate the authorized keys together with options
## It is possible to have multiple key files specified in `sshd_config` e.g.
## AuthorizedKeysFile %h/.ssh/authorized_keys %h/.ssh/authorized_keys_rhodecode
ssh.authorized_keys_file_path = %(here)s/rc/authorized_keys_rhodecode
## Command to execute the SSH wrapper. The binary is available in the
## rhodecode installation directory.
## e.g ~/.rccontrol/community-1/profile/bin/rc-ssh-wrapper
ssh.wrapper_cmd = ~/.rccontrol/community-1/rc-ssh-wrapper
## Allow shell when executing the ssh-wrapper command
ssh.wrapper_cmd_allow_shell = false
## Enables logging, and detailed output send back to the client. Useful for
## debugging, shouldn't be used in production.
ssh.enable_debug_logging = false
## Paths to binary executrables, by default they are the names, but we can
## override them if we want to use a custom one
ssh.executable.hg = ~/.rccontrol/vcsserver-1/profile/bin/hg
ssh.executable.git = ~/.rccontrol/vcsserver-1/profile/bin/git
ssh.executable.svn = ~/.rccontrol/vcsserver-1/profile/bin/svnserve
## Enables SSH key generator web interface. Disabling this still allows users
## to add their own keys.
ssh.enable_ui_key_generator = true
## Dummy marker to add new entries after.
## Add any custom entries below. Please don't remove.
custom.conf = 1
################################
### LOGGING CONFIGURATION ####
################################
[loggers]
keys = root, sqlalchemy, beaker, rhodecode, ssh_wrapper
[handlers]
keys = console, console_sql
[formatters]
keys = generic, color_formatter, color_formatter_sql
#############
## LOGGERS ##
#############
[logger_root]
level = NOTSET
handlers = console
[logger_routes]
level = DEBUG
handlers =
qualname = routes.middleware
## "level = DEBUG" logs the route matched and routing variables.
propagate = 1
[logger_beaker]
level = DEBUG
handlers =
qualname = beaker.container
propagate = 1
[logger_rhodecode]
level = DEBUG
handlers =
qualname = rhodecode
propagate = 1
[logger_sqlalchemy]
level = ERROR
handlers = console_sql
qualname = sqlalchemy.engine
propagate = 0
[logger_ssh_wrapper]
level = DEBUG
handlers =
qualname = ssh_wrapper
propagate = 1
##############
## HANDLERS ##
##############
[handler_console]
class = StreamHandler
args = (sys.stderr,)
level = DEBUG
formatter = generic
[handler_console_sql]
class = StreamHandler
args = (sys.stderr,)
level = WARN
formatter = generic
################
## FORMATTERS ##
################
[formatter_generic]
class = rhodecode.lib.logging_formatter.ExceptionAwareFormatter
format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
datefmt = %Y-%m-%d %H:%M:%S
[formatter_color_formatter]
class = rhodecode.lib.logging_formatter.ColorFormatter
format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
datefmt = %Y-%m-%d %H:%M:%S
[formatter_color_formatter_sql]
class = rhodecode.lib.logging_formatter.ColorFormatterSql
format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
datefmt = %Y-%m-%d %H:%M:%S