docs: moving svn http docs to vcs server management

docs/admin/lab-settings.rst

@@ -1,41 +1,31 b''
 .. _lab-settings:
 
 Lab Settings
 ============
 
 |RCE| Lab Settings is for delivering features which may require an additional
 level of support to optimize for production scenarios. To enable lab settings,
 use the following instructions:
 
 1. Open the |RCE| configuration file,
    :file:`/home/{user}/.rccontrol/{instance-id}/rhodecode.ini`
 
 2. Add the following configuration option in the ``[app:main]`` section.
 
 .. code-block:: bash
 
    [app:main]
 
    ## Display extended labs settings
    labs_settings_active = true
 
 3. Restart your |RCE| instance
 
 .. code-block:: bash
 
    $ rccontrol restart enterprise-1
 
 4. You will see the labs setting on the
    :menuselection:`Admin --> Settings --> labs` page.
 
 .. image:: ../images/lab-setting.png
-
-Available Lab Extras
---------------------
-
-Once lab settings are enabled, the following features are available.
-
-.. toctree::
-   :maxdepth: 1
-
-   svn-http

docs/admin/vcs-server.rst

@@ -1,301 +1,430 b''
 .. _vcs-server:
 
 VCS Server Management
 ---------------------
 
 The VCS Server handles |RCM| backend functionality. You need to configure
 a VCS Server to run with a |RCM| instance. If you do not, you will be missing
 the connection between |RCM| and its |repos|. This will cause error messages
 on the web interface. You can run your setup in the following configurations,
 currently the best performance is one VCS Server per |RCM| instance:
 
 * One VCS Server per |RCM| instance.
 * One VCS Server handling multiple instances.
 
 .. important::
 
    If your server locale settings are not correctly configured,
    |RCE| and the VCS Server can run into issues. See this `Ask Ubuntu`_ post
    which explains the problem and gives a solution.
 
 For more information, see the following sections:
 
 * :ref:`install-vcs`
 * :ref:`config-vcs`
 * :ref:`vcs-server-options`
 * :ref:`vcs-server-versions`
 * :ref:`vcs-server-maintain`
 * :ref:`vcs-server-config-file`
+* :ref:`svn-http`
 
 .. _install-vcs:
 
 VCS Server Installation
 ^^^^^^^^^^^^^^^^^^^^^^^
 
 To install a VCS Server, see
 :ref:`Installing a VCS server <control:install-vcsserver>`.
 
 .. _config-vcs:
 
 Hooking |RCE| to its VCS Server
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 To configure a |RCE| instance to use a VCS server, see
 :ref:`Configuring the VCS Server connection <control:manually-vcsserver-ini>`.
 
 .. _vcs-server-options:
 
 |RCE| VCS Server Options
 ^^^^^^^^^^^^^^^^^^^^^^^^
 
 The following list shows the available options on the |RCM| side of the
 connection to the VCS Server. The settings are configured per
 instance in the
 :file:`/home/{user}/.rccontrol/{instance-id}/rhodecode.ini` file.
 
 .. rst-class:: dl-horizontal
 
     \vcs.backends <available-vcs-systems>
         Set a comma-separated list of the |repo| options available from the
         web interface. The default is ``hg, git, svn``,
         which is all |repo| types available.
 
     \vcs.connection_timeout <seconds>
         Set the length of time in seconds that the VCS Server waits for
         requests to process. After the timeout expires,
         the request is closed. The default is ``3600``. Set to a higher
         number if you experience network latency, or timeout issues with very
         large push/pull requests.
 
     \vcs.server.enable <boolean>
         Enable or disable the VCS Server. The available options are ``true`` or
         ``false``. The default is ``true``.
 
     \vcs.server <host:port>
         Set the host, either hostname or IP Address, and port of the VCS server
         you wish to run with your |RCM| instance.
 
 .. code-block:: ini
 
     ##################
     ### VCS CONFIG ###
     ##################
     # set this line to match your VCS Server
     vcs.server = 127.0.0.1:10004
     # Set to False to disable the VCS Server
     vcs.server.enable = True
     vcs.backends = hg, git, svn
     vcs.connection_timeout = 3600
 
 
 .. _vcs-server-versions:
 
 VCS Server Versions
 ^^^^^^^^^^^^^^^^^^^
 
 An updated version of the VCS Server is released with each |RCE| version. Use
 the VCS Server number that matches with the |RCE| version to pair the
 appropriate ones together. For |RCE| versions pre 3.3.0,
 VCS Server 1.X.Y works with |RCE| 3.X.Y, for example:
 
 * VCS Server 1.0.0 works with |RCE| 3.0.0
 * VCS Server 1.2.2 works with |RCE| 3.2.2
 
 For |RCE| versions post 3.3.0, the VCS Server and |RCE| version numbers
 match, for example:
 
 * VCS Server |release| works with |RCE| |release|
 
 .. _vcs-server-maintain:
 
 VCS Server Memory Optimization
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 To configure the VCS server to manage the cache efficiently, you need to
 configure the following options in the
 :file:`/home/{user}/.rccontrol/{vcsserver-id}/vcsserver.ini` file. Once
 configured, restart the VCS Server.
 
 .. rst-class:: dl-horizontal
 
     \beaker.cache.repo_object.type = memorylru
         Configures the cache to discard the least recently used items.
         This setting takes the following valid options:
 
         * ``memorylru``: The default setting, which removes the least recently
           used items from the cache.
         * ``memory``: Runs the VCS Server without clearing the cache.
         * ``nocache``: Runs the VCS Server without a cache. This will
           dramatically reduce the VCS Server performance.
 
     \beaker.cache.repo_object.max_items = 100
         Sets the maximum number of items stored in the cache, before the cache
         starts to be cleared.
 
         As a general rule of thumb, running this value at 120 resulted in a
         5GB cache. Running it at 240 resulted in a 9GB cache. Your results
         will differ based on usage patterns and |repo| sizes.
 
         Tweaking this value to run at a fairly constant memory load on your
         server will help performance.
 
 To clear the cache completely, you can restart the VCS Server.
 
 .. important::
 
    While the VCS Server handles a restart gracefully on the web interface,
    it will drop connections during push/pull requests. So it is recommended
    you only perform this when there is very little traffic on the instance.
 
 Use the following example to restart your VCS Server,
 for full details see the :ref:`RhodeCode Control CLI <control:rcc-cli>`.
 
 .. code-block:: bash
 
     $ rccontrol status
 
 .. code-block:: vim
 
     - NAME: vcsserver-1
     - STATUS: RUNNING
     - TYPE: VCSServer
     - VERSION: 1.0.0
     - URL: http://127.0.0.1:10001
 
     $ rccontrol restart vcsserver-1
     Instance "vcsserver-1" successfully stopped.
     Instance "vcsserver-1" successfully started.
 
 .. _vcs-server-config-file:
 
 VCS Server Configuration
 ^^^^^^^^^^^^^^^^^^^^^^^^
 
 You can configure settings for multiple VCS Servers on your
 system using their individual configuration files. Use the following
 properties inside the configuration file to set up your system. The default
 location is :file:`home/{user}/.rccontrol/{vcsserver-id}/vcsserver.ini`.
 For a more detailed explanation of the logger levers, see :ref:`debug-mode`.
 
 .. rst-class:: dl-horizontal
 
     \host <ip-address>
         Set the host on which the VCS Server will run.
 
     \port <int>
         Set the port number on which the VCS Server will be available.
 
     \locale <locale_utf>
         Set the locale the VCS Server expects.
 
     \threadpool_size <int>
         Set the size of the threadpool used to communicate
         with the WSGI workers. This should be at least 6 times the number of
         WSGI worker processes.
 
     \timeout <seconds>
         Set the timeout for RPC communication in seconds.
 
 .. note::
 
    After making changes, you need to restart your VCS Server to pick them up.
 
 .. code-block:: ini
 
     ################################################################################
     # RhodeCode VCSServer - configuration                                          #
     #                                                                              #
     ################################################################################
 
     [DEFAULT]
     host = 127.0.0.1
     port = 9900
     locale = en_US.UTF-8
     # number of worker threads, this should be set based on a formula threadpool=N*6
     # where N is number of RhodeCode Enterprise workers, eg. running 2 instances
     # 8 gunicorn workers each would be 2 * 8 * 6 = 96, threadpool_size = 96
     threadpool_size = 16
     timeout = 0
 
     # cache regions, please don't change
     beaker.cache.regions = repo_object
     beaker.cache.repo_object.type = memorylru
     beaker.cache.repo_object.max_items = 1000
 
     # cache auto-expires after N seconds
     beaker.cache.repo_object.expire = 10
     beaker.cache.repo_object.enabled = true
 
 
     ################################
     ### LOGGING CONFIGURATION   ####
     ################################
     [loggers]
     keys = root, vcsserver, pyro4, beaker
 
     [handlers]
     keys = console
 
     [formatters]
     keys = generic
 
     #############
     ## LOGGERS ##
     #############
     [logger_root]
     level = NOTSET
     handlers = console
 
     [logger_vcsserver]
     level = DEBUG
     handlers =
     qualname = vcsserver
     propagate = 1
 
     [logger_beaker]
     level = DEBUG
     handlers =
     qualname = beaker
     propagate = 1
 
     [logger_pyro4]
     level = DEBUG
     handlers =
     qualname = Pyro4
     propagate = 1
 
 
     ##############
     ## HANDLERS ##
     ##############
 
     [handler_console]
     class = StreamHandler
     args = (sys.stderr,)
     level = DEBUG
     formatter = generic
 
     [handler_file]
     class = FileHandler
     args = ('vcsserver.log', 'a',)
     level = DEBUG
     formatter = generic
 
     [handler_file_rotating]
     class = logging.handlers.TimedRotatingFileHandler
     # 'D', 5 - rotate every 5days
     # you can set 'h', 'midnight'
     args = ('vcsserver.log', 'D', 5, 10,)
     level = DEBUG
     formatter = generic
 
     ################
     ## FORMATTERS ##
     ################
 
     [formatter_generic]
     format = %(asctime)s.%(msecs)03d %(levelname)-5.5s [%(name)s] %(message)s
     datefmt = %Y-%m-%d %H:%M:%S
 
+.. _svn-http:
 
-.. _Ask Ubuntu: http://askubuntu.com/questions/162391/how-do-i-fix-my-locale-issue
+|svn| With Write Over HTTP
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To use |svn| with read/write support over the |svn| HTTP protocol, you have to
+configure the HTTP |svn| backend.
+
+Prerequisites
+=============
+
+- Enable HTTP support inside the admin VCS settings on your |RCE| instance
+- You need to install the following tools on the machine that is running an
+  instance of |RCE|:
+  ``Apache HTTP Server`` and
+  ``mod_dav_svn``.
+
+
+Using Ubuntu Distribution as an example you can run:
+
+.. code-block:: bash
+
+    $ sudo apt-get install apache2 libapache2-mod-svn
+
+Once installed you need to enable ``dav_svn``:
+
+.. code-block:: bash
+
+    $ sudo a2enmod dav_svn
+
+Configuring Apache Setup
+========================
+
+.. tip::
+
+   It is recommended to run Apache on a port other than 80, due to possible
+   conflicts with other HTTP servers like nginx. To do this, set the
+   ``Listen`` parameter in the ``/etc/apache2/ports.conf`` file, for example
+   ``Listen 8090``.
+
+
+.. warning::
+
+   Make sure your Apache instance which runs the mod_dav_svn module is
+   only accessible by RhodeCode. Otherwise everyone is able to browse
+   the repositories or run subversion operations (checkout/commit/etc.).
+
+It is also recommended to run apache as the same user as |RCE|, otherwise
+permission issues could occur. To do this edit the ``/etc/apache2/envvars``
+
+   .. code-block:: apache
+
+      export APACHE_RUN_USER=rhodecode
+      export APACHE_RUN_GROUP=rhodecode
+
+1. To configure Apache, create and edit a virtual hosts file, for example
+   :file:`/etc/apache2/sites-available/default.conf`. Below is an example
+   how to use one with auto-generated config ```mod_dav_svn.conf```
+   from configured |RCE| instance.
+
+.. code-block:: apache
+
+    <VirtualHost *:8080>
+        ServerAdmin rhodecode-admin@localhost
+        DocumentRoot /var/www/html
+        ErrorLog ${'${APACHE_LOG_DIR}'}/error.log
+        CustomLog ${'${APACHE_LOG_DIR}'}/access.log combined
+        Include /home/user/.rccontrol/enterprise-1/mod_dav_svn.conf
+    </VirtualHost>
+
+
+2. Go to the :menuselection:`Admin --> Settings --> VCS` page, and
+   enable :guilabel:`Proxy Subversion HTTP requests`, and specify the
+   :guilabel:`Subversion HTTP Server URL`.
+
+3. Open the |RCE| configuration file,
+   :file:`/home/{user}/.rccontrol/{instance-id}/rhodecode.ini`
+
+4. Add the following configuration option in the ``[app:main]``
+   section if you don't have it yet.
+
+   This enables mapping of the created |RCE| repo groups into special |svn| paths.
+   Each time a new repository group is created, the system will update
+   the template file and create new mapping. Apache web server needs to be
+   reloaded to pick up the changes on this file.
+   It's recommended to add reload into a crontab so the changes can be picked
+   automatically once someone creates a repository group inside RhodeCode.
+
+
+.. code-block:: ini
+
+    ##############################################
+    ### Subversion proxy support (mod_dav_svn) ###
+    ##############################################
+    ## Enable or disable the config file generation.
+    svn.proxy.generate_config = true
+    ## Generate config file with `SVNListParentPath` set to `On`.
+    svn.proxy.list_parent_path = true
+    ## Set location and file name of generated config file.
+    svn.proxy.config_file_path = %(here)s/mod_dav_svn.conf
+    ## File system path to the directory containing the repositories served by
+    ## RhodeCode.
+    svn.proxy.parent_path_root = /path/to/repo_store
+    ## Used as a prefix to the <Location> block in the generated config file. In
+    ## most cases it should be set to `/`.
+    svn.proxy.location_root = /
+
+
+This would create a special template file called ```mod_dav_svn.conf```. We
+used that file path in the apache config above inside the Include statement.
+
+
+Using |svn|
+===========
+
+Once |svn| has been enabled on your instance, you can use it with the
+following examples. For more |svn| information, see the `Subversion Red Book`_
+
+.. code-block:: bash
+
+    # To clone a repository
+    svn checkout http://my-svn-server.example.com/my-svn-repo
+
+    # svn commit
+    svn commit
+
+.. _Subversion Red Book: http://svnbook.red-bean.com/en/1.7/svn-book.html#svn.ref.svn
+
+
+.. _Ask Ubuntu: http://askubuntu.com/questions/162391/how-do-i-fix-my-locale-issue
  No newline at end of file