diff --git a/tools/alldeps/Makefile b/tools/alldeps/Makefile
new file mode 100644
index 0000000..8076acd
--- /dev/null
+++ b/tools/alldeps/Makefile
@@ -0,0 +1,130 @@
+# Simple makefile to rapidly deploy IPython with all its dependencies.
+
+# Configuration section.  The version numbers and paths declared here may
+# change with each release.
+
+# IPython version
+IPYTHON_VER=0.9.1
+
+# Declare here version numbers of all the dependencies
+PYOPENSSL_VER=0.6
+ZOPE_INTERFACE_VER=3.4.1
+TWISTED_VER=8.1.0
+FOOLSCAP_VER=0.3.1
+NOSE_VER=0.10.3
+
+# Repository URLs for all packages.  Make sure these are correct for each
+# release, since projects may change paths!
+IPYTHON_REPO=http://ipython.scipy.org/dist
+PYOPENSSL_REPO=http://downloads.sourceforge.net/pyopenssl
+ZOPE_INTERFACE_REPO=http://pypi.python.org/packages/source/z/zope.interface
+TWISTED_REPO=http://tmrc.mit.edu/mirror/twisted/Twisted/8.1
+FOOLSCAP_REPO=http://foolscap.lothar.com/releases
+NOSE_REPO=http://somethingaboutorange.com/mrl/projects/nose
+
+#-----------------------------------------------------------------------------
+# Main code begins.  There shouldn't be much to change here with each release.
+#
+
+# Hand-written files to ship in self-contained tarball
+SOURCES=pkginstall pkginstall.cfg Makefile README.txt README.html
+
+# Versions of tarballs we ship
+IPYTHON=ipython-$(IPYTHON_VER).tar.gz
+IP_ALLDEPS=ipython-alldeps-$(IPYTHON_VER)
+
+PYOPENSSL=pyOpenSSL-$(PYOPENSSL_VER).tar.gz
+ZOPE_INTERFACE=zope.interface-$(ZOPE_INTERFACE_VER).tar.gz
+NOSE=nose-$(NOSE_VER).tar.gz
+TWISTED=Twisted-$(TWISTED_VER).tar.bz2
+FOOLSCAP=foolscap-$(FOOLSCAP_VER).tar.gz
+
+TARBALLS=$(PYOPENSSL) $(ZOPE_INTERFACE) $(TWISTED) $(FOOLSCAP) \
+$(NOSE) $(IPYTHON)
+
+# URLs for downloads
+
+#-----------------------------------------------------------------------------
+# Target declaration
+#
+
+# Targets to install, in correct dependency order
+install: pyopenssl zope.interface twisted foolscap nose ipython
+	echo
+	echo "IPython Installation finished."
+	echo "You can now run the ipython test suite by running:"
+	echo "iptest"
+	echo "If all tests pass, you can delete this entire directory."
+	echo
+
+# Download targets
+download: $(TARBALLS)
+
+$(IPYTHON):
+	wget $(IPYTHON_REPO)/$(IPYTHON)
+
+$(PYOPENSSL):
+	wget $(PYOPENSSL_REPO)/$(PYOPENSSL)
+
+$(ZOPE_INTERFACE):
+	wget $(ZOPE_INTERFACE_REPO)/$(ZOPE_INTERFACE)
+
+$(TWISTED):
+	wget $(TWISTED_REPO)/$(TWISTED)
+
+$(FOOLSCAP):
+	wget $(FOOLSCAP_REPO)/$(FOOLSCAP)
+
+$(NOSE):
+	wget $(NOSE_REPO)/$(NOSE)
+
+
+# The calls to pkginstall must use the actual Python package name
+nose: $(NOSE)
+	./pkginstall nose
+
+zope.interface: $(ZOPE_INTERFACE)
+	./pkginstall zope.interface zope
+
+pyopenssl: $(PYOPENSSL)
+	./pkginstall pyOpenSSL OpenSSL
+
+twisted: $(TWISTED)
+	./pkginstall Twisted
+
+foolscap: $(FOOLSCAP)
+	./pkginstall foolscap
+
+ipython: $(IPYTHON)
+	./pkginstall ipython IPython
+
+# Distribution targets
+dist: $(IP_ALLDEPS).tar
+
+$(IP_ALLDEPS).tar: download readme
+	-mkdir $(IP_ALLDEPS)
+	-ln $(SOURCES) $(TARBALLS) $(IP_ALLDEPS)/
+	tar cf $(IP_ALLDEPS).tar $(IP_ALLDEPS)
+	rm -rf $(IP_ALLDEPS)
+
+readme: README.html
+
+README.html: README.txt
+	rst2html README.txt > README.html
+
+# Auxiliary targets
+upload: dist
+	rsync -e ssh -av README.html $(IP_ALLDEPS).tar \
+	ipython@ipython.scipy.org:www/dist/alldeps
+
+clean:
+	ls -p | grep /$ | xargs rm -rf
+	rm -f $(IP_ALLDEPS)* *~
+
+distclean: clean
+	rm -f $(TARBALLS)
+	rm README.html
+
+info:
+	echo "TARBALLS"
+	echo $(TARBALLS)
diff --git a/tools/alldeps/README.txt b/tools/alldeps/README.txt
new file mode 100644
index 0000000..f40ec7a
--- /dev/null
+++ b/tools/alldeps/README.txt
@@ -0,0 +1,109 @@
+===========================================================
+ Self-contained IPython installation with all dependencies
+===========================================================
+
+This is a self-contained source distribution of IPython with all its
+*non-graphical* dependencies, that installs in a single ``make`` call to your
+home directory (by default) or any location of your choice.
+
+This distribution is meant for developer-type usage in Unix environments, it is
+*not* an easy way to get IPython working on Windows, since it assumes the
+presence of a working compiler and development tools.
+
+Currently, the distribution contains::
+
+  ipython-0.9.1.tar.gz
+  pyOpenSSL-0.6.tar.gz
+  zope.interface-3.4.1.tar.gz
+  Twisted-8.1.0.tar.bz2
+  foolscap-0.3.1.tar.gz
+  nose-0.10.3.tar.gz
+
+
+Usage
+=====
+
+Download the single tarball where this README file lives and unpack it.  If
+your system is already configured as described below, these lines will do the
+whole job::
+
+    wget http://ipython.scipy.org/dist/alldeps/ipython-alldeps-0.9.1.tar
+    tar xf ipython-alldeps-0.9.1.tar
+    cd ipython-alldeps-0.9.1
+    make
+
+If all goes well, then just type::
+
+    iptest
+
+to run IPython's test suite.
+
+    
+It is meant to be used in an environment where you have your ``$PATH``,
+``$PYTHONPATH``, etc variables properly configured, so that the installation of
+packages can be made with (using ``~/usr/local`` as an example)::
+
+    python setup.py install --prefix=~/usr/local
+
+For an explanation of how to do this, see below.
+
+You can configure the default prefix used by editing the file
+``pkginstall.cfg``, where you can also override the python version used for the
+process.  If your system is configured in this manner, you can simply type::
+
+    make
+
+and this will build and install all of IPython's non-graphical dependencies on
+your system, assuming you have Python, a compiler, the Python headers and the
+SSL headers available.
+
+
+.. _environment_configuration:
+
+Environment configuration
+=========================
+
+Below is an example of what to put in your ``~/.bashrc`` file to configure your
+environment as described in this document, in a reasonably portable manner that
+takes 64-bit operating systems into account::
+
+  # For processor dependent config
+  MACHINE=$(uname -m)
+
+  # Python version information
+  PYVER=$(python -ESV 2>&1)
+  PYVER_MINOR=${PYVER#Python }
+  PYVER_MAJOR=${PYVER_MINOR:0:3}
+
+  function export_paths {
+      # Export useful paths based on a common prefix
+
+      # Input: a path prefix
+
+      local prefix=$1
+      local pp
+      local lp
+      local pypath=python${PYVER_MAJOR}/site-packages
+
+      # Compute paths with 64-bit specifics
+      if [[ $MACHINE == "x86_64" ]]; then
+	  lp=$prefix/lib64:$prefix/lib
+	  pp=$prefix/lib64/$pypath:$prefix/lib/$pypath
+      else	
+	  lp=$prefix/lib
+	  pp=$prefix/lib/$pypath
+      fi
+
+      # Set paths based on given prefix
+      export PATH=$prefix/bin:$PATH
+      export CPATH=$prefix/include:$CPATH
+      export LD_LIBRARY_PATH=$lp:$LD_LIBRARY_PATH
+      export LIBRARY_PATH=$lp:$LIBRARY_PATH
+      export PYTHONPATH=$pp:$PYTHONPATH
+  }
+
+  # Actually call the export function to set the paths.  If you want more than
+  # one such prefix, note that the call *prepends* the new prefix to the
+  # existing paths, so later calls take priority.
+
+  export_paths $HOME/usr/local
diff --git a/tools/alldeps/pkginstall b/tools/alldeps/pkginstall
new file mode 100755
index 0000000..14a731a
--- /dev/null
+++ b/tools/alldeps/pkginstall
@@ -0,0 +1,119 @@
+#!/bin/bash
+#
+# Simple installation shell script for Python packages.
+#
+# Usage:
+#   pkginstall PAKPREFIX [PYPACKAGE]
+#
+# PAKPREFIX: prefix of the package as distributed in the tarball.
+#
+# PYPACKAGE: name of the Python package as it will end up installed.  If not
+# given, it defaults to PAKPREFIX.
+#
+
+#-----------------------------------------------------------------------------
+# Process command-line args
+#
+PAKPREFIX=$1
+PYPACKAGE=${2:-$PAKPREFIX}
+
+#-----------------------------------------------------------------------------
+# Configure main variables
+#
+# Defaults for variables that the .cfg file may override.
+PYTHON_DEFAULT=python
+PREFIX_DEFAULT=$HOME/usr/local
+
+# Read config file which may declare user values for these variables.
+source ./pkginstall.cfg
+
+# Set the variables we'll actually use, either from the config file or from our
+# defaults.
+PYTHON=${PYTHON-${PYTHON_DEFAULT}}
+PREFIX=${PREFIX-${PREFIX_DEFAULT}}
+
+#-----------------------------------------------------------------------------
+# 'Main' code begins
+#
+
+# Find the actual python executable path
+PYTHONX=$(which $PYTHON)
+if [[ ! -x $PYTHONX ]]; then
+    echo "ERROR: no python executable found at given path: $PYTHON"
+    echo "Aborting."
+    exit 1
+fi    
+
+# Python version information.  PYTHONV holds a versioned string used to build
+# the site-packages path for the actual Python version we'll use.
+PYVER=$($PYTHONX -ESV 2>&1)
+PYVER_MINOR=${PYVER#Python }
+PYVER_MAJOR=${PYVER_MINOR:0:3}
+PYTHONV=python${PYVER_MAJOR}
+
+# Set prefixes and other variables for the installation path.
+SITEPKG=${PREFIX}/lib/${PYTHONV}/site-packages
+SITEPKG64=${PREFIX}/lib64/${PYTHONV}/site-packages
+
+# User diagnostics of current config
+echo "Configuration:"
+echo "  PYTHON   : $PYTHON"
+echo "  PYTHONX  : $PYTHONX"
+echo "  PREFIX   : $PREFIX"
+echo "  SITEPKG  : $SITEPKG"
+echo "  SITEPKG64: $SITEPKG64"
+
+# Find tarball
+tarball=$(ls *$PAKPREFIX*.tar.*)
+
+if [[ -z $tarball ]]; then
+    echo "ERROR: tarball not found for $PYPACKAGE"
+    exit 1
+fi
+
+# Figure out the name of the directory and compression format to use to unpack
+pakdir=$(echo $tarball | awk -F '.tar.' '{print $1}')
+tarfmt=$(echo $tarball | awk -F '.tar.' '{print $2}')
+
+if [[ $tarfmt == "gz" ]]; then
+    tarflag="z"
+else
+    tarflag="j"
+fi
+
+# Unpack the tarball if needed
+if [[ ! -d $pakdir ]]; then
+    echo "Unpacking tarball: $tarball"
+    tar -x -${tarflag} -f $tarball
+
+        if [[ ! -d $pakdir ]]; then
+	echo "Tarball $tarball unpacked to unexpected path, aborting"
+	exit 1
+    fi
+fi
+
+# Remove existing ${PYPACKAGE} to make sure the build doesn't pick up spurious
+# things.  We don't touch the bin/ dir or anything else because it's hard to
+# know what goes there in advance.  But this should prevent most serious
+# problems.
+rm -rf $SITEPKG/${PYPACKAGE}
+rm -rf $SITEPKG/${PYPACKAGE}*.egg
+rm -rf $SITEPKG/${PYPACKAGE}*.egg-info
+
+rm -rf $SITEPKG64/${PYPACKAGE}
+rm -rf $SITEPKG64/${PYPACKAGE}*.egg
+rm -rf $SITEPKG64/${PYPACKAGE}*.egg-info
+
+# Make/install phase
+
+# Set python search path correctly
+export PYTHONPATH=$SITEPKG:$SITEPKG64:$PYTHONPATH
+
+# Ensure install dirs exist
+mkdir -p $SITEPKG
+mkdir -p $SITEPKG64
+
+cd ${pakdir}
+rm -rf build dist
+$PYTHONX setup.py clean
+time $PYTHONX setup.py install --prefix=$PREFIX
diff --git a/tools/alldeps/pkginstall.cfg b/tools/alldeps/pkginstall.cfg
new file mode 100644
index 0000000..34e2f2d
--- /dev/null
+++ b/tools/alldeps/pkginstall.cfg
@@ -0,0 +1,27 @@
+# -*- sh -*-
+#
+# Configuration for the pkginstall script.
+# This script uses bash syntax, as it will be sourced by a bash script.
+
+# Uncomment and set the variables you want, otherwise pkginstall has sensible
+# defaults predefined.  These can also be declared either as environment
+# variables (which can be done by the makefile calling this script).
+
+#-----------------------------------------------------------------------------
+#
+# Executable for Python.
+#
+# You can set this to an explicit full path if you don't want the default
+# (simply 'python') to be the version used to install this package.
+
+#PYTHON=python
+
+#-----------------------------------------------------------------------------
+#
+# Default prefix.
+#
+# This should be a valid input the setup.py script as the --prefix argument.
+# That is, your $PYTHONPATH should contain $PREFIX/lib/pythonX.Y/site-packages,
+# your $PATH should contain $PREFIX/bin, etc.
+
+#PREFIX=$HOME/usr/local