-twisted command line opt launches twisted reactor and uses it to execute code given by ipython mainloop thread

IPython/Shell.py

@@ -1,1218 +1,1221 b''
 # -*- coding: utf-8 -*-
 """IPython Shell classes.
 
 All the matplotlib support code was co-developed with John Hunter,
 matplotlib's author.
 
 $Id: Shell.py 3024 2008-02-07 15:34:42Z darren.dale $"""
 
 #*****************************************************************************
 #       Copyright (C) 2001-2006 Fernando Perez <[e-mail]>
 #
 #  Distributed under the terms of the BSD License.  The full license is in
 #  the file COPYING, distributed as part of this software.
 #*****************************************************************************
 
 from IPython import Release
 __author__  = '%s <%s>' % Release.authors['Fernando']
 __license__ = Release.license
 
 # Code begins
 # Stdlib imports
 import __builtin__
 import __main__
 import Queue
 import inspect
 import os
 import sys
 import thread
 import threading
 import time
 
 from signal import signal, SIGINT
 
 try:
     import ctypes
     HAS_CTYPES = True
 except ImportError:
     HAS_CTYPES = False
 
 # IPython imports
 import IPython
 from IPython import ultraTB, ipapi
 from IPython.genutils import Term,warn,error,flag_calls, ask_yes_no
 from IPython.iplib import InteractiveShell
 from IPython.ipmaker import make_IPython
 from IPython.Magic import Magic
 from IPython.ipstruct import Struct
 
 # Globals
 # global flag to pass around information about Ctrl-C without exceptions
 KBINT = False
 
 # global flag to turn on/off Tk support.
 USE_TK = False
 
 # ID for the main thread, used for cross-thread exceptions
 MAIN_THREAD_ID = thread.get_ident()
 
 # Tag when runcode() is active, for exception handling
 CODE_RUN = None
 
 #-----------------------------------------------------------------------------
 # This class is trivial now, but I want to have it in to publish a clean
 # interface. Later when the internals are reorganized, code that uses this
 # shouldn't have to change.
 
 class IPShell:
     """Create an IPython instance."""
     
     def __init__(self,argv=None,user_ns=None,user_global_ns=None,
                  debug=1,shell_class=InteractiveShell):
         self.IP = make_IPython(argv,user_ns=user_ns,
                                user_global_ns=user_global_ns,
                                debug=debug,shell_class=shell_class)
 
     def mainloop(self,sys_exit=0,banner=None):
         self.IP.mainloop(banner)
         if sys_exit:
             sys.exit()
 
 #-----------------------------------------------------------------------------
 def kill_embedded(self,parameter_s=''):
     """%kill_embedded : deactivate for good the current embedded IPython.
 
     This function (after asking for confirmation) sets an internal flag so that
     an embedded IPython will never activate again.  This is useful to
     permanently disable a shell that is being called inside a loop: once you've
     figured out what you needed from it, you may then kill it and the program
     will then continue to run without the interactive shell interfering again.
     """
     
     kill = ask_yes_no("Are you sure you want to kill this embedded instance "
                      "(y/n)? [y/N] ",'n')
     if kill:
         self.shell.embedded_active = False
         print "This embedded IPython will not reactivate anymore once you exit."
     
 class IPShellEmbed:
     """Allow embedding an IPython shell into a running program.
 
     Instances of this class are callable, with the __call__ method being an
     alias to the embed() method of an InteractiveShell instance.
 
     Usage (see also the example-embed.py file for a running example):
 
     ipshell = IPShellEmbed([argv,banner,exit_msg,rc_override])
 
     - argv: list containing valid command-line options for IPython, as they
     would appear in sys.argv[1:].
 
     For example, the following command-line options:
 
       $ ipython -prompt_in1 'Input <\\#>' -colors LightBG
 
     would be passed in the argv list as:
 
       ['-prompt_in1','Input <\\#>','-colors','LightBG']
 
     - banner: string which gets printed every time the interpreter starts.
 
     - exit_msg: string which gets printed every time the interpreter exits.
 
     - rc_override: a dict or Struct of configuration options such as those
     used by IPython. These options are read from your ~/.ipython/ipythonrc
     file when the Shell object is created. Passing an explicit rc_override
     dict with any options you want allows you to override those values at
     creation time without having to modify the file. This way you can create
     embeddable instances configured in any way you want without editing any
     global files (thus keeping your interactive IPython configuration
     unchanged).
 
     Then the ipshell instance can be called anywhere inside your code:
     
     ipshell(header='') -> Opens up an IPython shell.
 
     - header: string printed by the IPython shell upon startup. This can let
     you know where in your code you are when dropping into the shell. Note
     that 'banner' gets prepended to all calls, so header is used for
     location-specific information.
 
     For more details, see the __call__ method below.
 
     When the IPython shell is exited with Ctrl-D, normal program execution
     resumes.
 
     This functionality was inspired by a posting on comp.lang.python by cmkl
     <[e-mail]> on Dec. 06/01 concerning similar uses of pyrepl, and
     by the IDL stop/continue commands."""
 
     def __init__(self,argv=None,banner='',exit_msg=None,rc_override=None,
                  user_ns=None):
         """Note that argv here is a string, NOT a list."""
         self.set_banner(banner)
         self.set_exit_msg(exit_msg)
         self.set_dummy_mode(0)
 
         # sys.displayhook is a global, we need to save the user's original
         # Don't rely on __displayhook__, as the user may have changed that.
         self.sys_displayhook_ori = sys.displayhook
 
         # save readline completer status
         try:
             #print 'Save completer',sys.ipcompleter  # dbg
             self.sys_ipcompleter_ori = sys.ipcompleter
         except:
             pass # not nested with IPython
         
         self.IP = make_IPython(argv,rc_override=rc_override,
                                embedded=True,
                                user_ns=user_ns)
 
         ip = ipapi.IPApi(self.IP)
         ip.expose_magic("kill_embedded",kill_embedded)
 
         # copy our own displayhook also
         self.sys_displayhook_embed = sys.displayhook
         # and leave the system's display hook clean
         sys.displayhook = self.sys_displayhook_ori
         # don't use the ipython crash handler so that user exceptions aren't
         # trapped
         sys.excepthook = ultraTB.FormattedTB(color_scheme = self.IP.rc.colors,
                                              mode = self.IP.rc.xmode,
                                              call_pdb = self.IP.rc.pdb)
         self.restore_system_completer()
 
     def restore_system_completer(self):
         """Restores the readline completer which was in place.
 
         This allows embedded IPython within IPython not to disrupt the
         parent's completion.
         """
         
         try:
             self.IP.readline.set_completer(self.sys_ipcompleter_ori)
             sys.ipcompleter = self.sys_ipcompleter_ori
         except:
             pass
 
     def __call__(self,header='',local_ns=None,global_ns=None,dummy=None):
         """Activate the interactive interpreter.
 
         __call__(self,header='',local_ns=None,global_ns,dummy=None) -> Start
         the interpreter shell with the given local and global namespaces, and
         optionally print a header string at startup.
 
         The shell can be globally activated/deactivated using the
         set/get_dummy_mode methods. This allows you to turn off a shell used
         for debugging globally.
 
         However, *each* time you call the shell you can override the current
         state of dummy_mode with the optional keyword parameter 'dummy'. For
         example, if you set dummy mode on with IPShell.set_dummy_mode(1), you
         can still have a specific call work by making it as IPShell(dummy=0).
 
         The optional keyword parameter dummy controls whether the call
         actually does anything.  """
 
         # If the user has turned it off, go away
         if not self.IP.embedded_active:
             return
 
         # Normal exits from interactive mode set this flag, so the shell can't
         # re-enter (it checks this variable at the start of interactive mode).
         self.IP.exit_now = False
 
         # Allow the dummy parameter to override the global __dummy_mode
         if dummy or (dummy != 0 and self.__dummy_mode):
             return
 
         # Set global subsystems (display,completions) to our values
         sys.displayhook = self.sys_displayhook_embed
         if self.IP.has_readline:
             self.IP.set_completer()
 
         if self.banner and header:
             format = '%s\n%s\n'
         else:
             format = '%s%s\n'
         banner =  format % (self.banner,header)
 
         # Call the embedding code with a stack depth of 1 so it can skip over
         # our call and get the original caller's namespaces.
         self.IP.embed_mainloop(banner,local_ns,global_ns,stack_depth=1)
 
         if self.exit_msg:
             print self.exit_msg
             
         # Restore global systems (display, completion)
         sys.displayhook = self.sys_displayhook_ori
         self.restore_system_completer()
     
     def set_dummy_mode(self,dummy):
         """Sets the embeddable shell's dummy mode parameter.
 
         set_dummy_mode(dummy): dummy = 0 or 1.
 
         This parameter is persistent and makes calls to the embeddable shell
         silently return without performing any action. This allows you to
         globally activate or deactivate a shell you're using with a single call.
 
         If you need to manually"""
 
         if dummy not in [0,1,False,True]:
             raise ValueError,'dummy parameter must be boolean'
         self.__dummy_mode = dummy
 
     def get_dummy_mode(self):
         """Return the current value of the dummy mode parameter.
         """
         return self.__dummy_mode
     
     def set_banner(self,banner):
         """Sets the global banner.
 
         This banner gets prepended to every header printed when the shell
         instance is called."""
 
         self.banner = banner
 
     def set_exit_msg(self,exit_msg):
         """Sets the global exit_msg.
 
         This exit message gets printed upon exiting every time the embedded
         shell is called. It is None by default. """
 
         self.exit_msg = exit_msg
 
 #-----------------------------------------------------------------------------
 if HAS_CTYPES:
     #  Add async exception support.  Trick taken from:
     # http://sebulba.wikispaces.com/recipe+thread2
     def _async_raise(tid, exctype):
         """raises the exception, performs cleanup if needed"""
         if not inspect.isclass(exctype):
             raise TypeError("Only types can be raised (not instances)")
         res = ctypes.pythonapi.PyThreadState_SetAsyncExc(tid,
                                                          ctypes.py_object(exctype))
         if res == 0:
             raise ValueError("invalid thread id")
         elif res != 1:
             # """if it returns a number greater than one, you're in trouble, 
             # and you should call it again with exc=NULL to revert the effect"""
             ctypes.pythonapi.PyThreadState_SetAsyncExc(tid, 0)
             raise SystemError("PyThreadState_SetAsyncExc failed")
 
     def sigint_handler (signum,stack_frame):
         """Sigint handler for threaded apps.
 
         This is a horrible hack to pass information about SIGINT _without_
         using exceptions, since I haven't been able to properly manage
         cross-thread exceptions in GTK/WX.  In fact, I don't think it can be
         done (or at least that's my understanding from a c.l.py thread where
         this was discussed)."""
 
         global KBINT
 
         if CODE_RUN:
             _async_raise(MAIN_THREAD_ID,KeyboardInterrupt)
         else:
             KBINT = True
             print '\nKeyboardInterrupt - Press <Enter> to continue.',
             Term.cout.flush()
 
 else:
     def sigint_handler (signum,stack_frame):
         """Sigint handler for threaded apps.
 
         This is a horrible hack to pass information about SIGINT _without_
         using exceptions, since I haven't been able to properly manage
         cross-thread exceptions in GTK/WX.  In fact, I don't think it can be
         done (or at least that's my understanding from a c.l.py thread where
         this was discussed)."""
 
         global KBINT
 
         print '\nKeyboardInterrupt - Press <Enter> to continue.',
         Term.cout.flush()
         # Set global flag so that runsource can know that Ctrl-C was hit
         KBINT = True
 
 
 class MTInteractiveShell(InteractiveShell):
     """Simple multi-threaded shell."""
 
     # Threading strategy taken from:
     # http://aspn.activestate.com/ASPN/Cookbook/Python/Recipe/65109, by Brian
     # McErlean and John Finlay.  Modified with corrections by Antoon Pardon,
     # from the pygtk mailing list, to avoid lockups with system calls.
 
     # class attribute to indicate whether the class supports threads or not.
     # Subclasses with thread support should override this as needed.
     isthreaded = True
 
     def __init__(self,name,usage=None,rc=Struct(opts=None,args=None),
                  user_ns=None,user_global_ns=None,banner2='',**kw):
         """Similar to the normal InteractiveShell, but with threading control"""
         
         InteractiveShell.__init__(self,name,usage,rc,user_ns,
                                   user_global_ns,banner2)
 
 
         # A queue to hold the code to be executed. 
         self.code_queue = Queue.Queue()
 
         # Stuff to do at closing time
         self._kill = None
         on_kill = kw.get('on_kill', [])
         # Check that all things to kill are callable:
         for t in on_kill:
             if not callable(t):
                 raise TypeError,'on_kill must be a list of callables'
         self.on_kill = on_kill
         # thread identity of the "worker thread" (that may execute code directly)
         self.worker_ident = None
         
     def runsource(self, source, filename="<input>", symbol="single"):
         """Compile and run some source in the interpreter.
 
         Modified version of code.py's runsource(), to handle threading issues.
         See the original for full docstring details."""
         
         global KBINT
         
         # If Ctrl-C was typed, we reset the flag and return right away
         if KBINT:
             KBINT = False
             return False
 
         if self._kill:
             # can't queue new code if we are being killed
             return True
         
         try:
             code = self.compile(source, filename, symbol)
         except (OverflowError, SyntaxError, ValueError):
             # Case 1
             self.showsyntaxerror(filename)
             return False
 
         if code is None:
             # Case 2
             return True
 
         # shortcut - if we are in worker thread, or the worker thread is not running, 
         # execute directly (to allow recursion and prevent deadlock if code is run early 
         # in IPython construction)
         
-        if self.worker_ident is None or self.worker_ident == thread.get_ident():
+        if (self.worker_ident is None or self.worker_ident == thread.get_ident()):
             InteractiveShell.runcode(self,code)
             return
 
         # Case 3
         # Store code in queue, so the execution thread can handle it.
 
         completed_ev, received_ev = threading.Event(), threading.Event() 
         
         self.code_queue.put((code,completed_ev, received_ev))
         # first make sure the message was received, with timeout
         received_ev.wait(5)
         if not received_ev.isSet():
             # the mainloop is dead, start executing code directly
             print "Warning: Timeout for mainloop thread exceeded"
             print "switching to nonthreaded mode (until mainloop wakes up again)"
             self.worker_ident = None
         else:
             completed_ev.wait()
         return False
 
     def runcode(self):
         """Execute a code object.
 
         Multithreaded wrapper around IPython's runcode()."""
         
         global CODE_RUN
         
         # we are in worker thread, stash out the id for runsource() 
         self.worker_ident = thread.get_ident()
 
         if self._kill:
             print >>Term.cout, 'Closing threads...',
             Term.cout.flush()
             for tokill in self.on_kill:
                 tokill()
             print >>Term.cout, 'Done.'
             # allow kill() to return
             self._kill.set()
             return True
 
         # Install sigint handler.  We do it every time to ensure that if user
         # code modifies it, we restore our own handling.
         try:
             signal(SIGINT,sigint_handler)
         except SystemError:
             # This happens under Windows, which seems to have all sorts
             # of problems with signal handling.  Oh well...
             pass
 
         # Flush queue of pending code by calling the run methood of the parent
         # class with all items which may be in the queue.
         code_to_run = None
         while 1:
             try:
                 code_to_run, completed_ev, received_ev = self.code_queue.get_nowait()                
             except Queue.Empty:
                 break
             received_ev.set()
             
             # Exceptions need to be raised differently depending on which
             # thread is active.  This convoluted try/except is only there to
             # protect against asynchronous exceptions, to ensure that a KBINT
             # at the wrong time doesn't deadlock everything.  The global
             # CODE_TO_RUN is set to true/false as close as possible to the
             # runcode() call, so that the KBINT handler is correctly informed.
             try:
                 try:
                    CODE_RUN = True
                    InteractiveShell.runcode(self,code_to_run)
                 except KeyboardInterrupt:
                    print "Keyboard interrupted in mainloop"
                    while not self.code_queue.empty():
                       code, ev1,ev2 = self.code_queue.get_nowait()
                       ev1.set()
                       ev2.set()                      
                    break
             finally:
                 CODE_RUN = False
                 # allow runsource() return from wait
                 completed_ev.set()
                 
         
         # This MUST return true for gtk threading to work
         return True
 
     def kill(self):
         """Kill the thread, returning when it has been shut down."""
         self._kill = threading.Event()
         self._kill.wait()
 
 class MatplotlibShellBase:
     """Mixin class to provide the necessary modifications to regular IPython
     shell classes for matplotlib support.
 
     Given Python's MRO, this should be used as the FIRST class in the
     inheritance hierarchy, so that it overrides the relevant methods."""
     
     def _matplotlib_config(self,name,user_ns):
         """Return items needed to setup the user's shell with matplotlib"""
 
         # Initialize matplotlib to interactive mode always
         import matplotlib
         from matplotlib import backends
         matplotlib.interactive(True)
 
         def use(arg):
             """IPython wrapper for matplotlib's backend switcher.
 
             In interactive use, we can not allow switching to a different
             interactive backend, since thread conflicts will most likely crash
             the python interpreter.  This routine does a safety check first,
             and refuses to perform a dangerous switch.  It still allows
             switching to non-interactive backends."""
 
             if arg in backends.interactive_bk and arg != self.mpl_backend:
                 m=('invalid matplotlib backend switch.\n'
                    'This script attempted to switch to the interactive '
                    'backend: `%s`\n'
                    'Your current choice of interactive backend is: `%s`\n\n'
                    'Switching interactive matplotlib backends at runtime\n'
                    'would crash the python interpreter, '
                    'and IPython has blocked it.\n\n'
                    'You need to either change your choice of matplotlib backend\n'
                    'by editing your .matplotlibrc file, or run this script as a \n'
                    'standalone file from the command line, not using IPython.\n' %
                    (arg,self.mpl_backend) )
                 raise RuntimeError, m
             else:
                 self.mpl_use(arg)
                 self.mpl_use._called = True
         
         self.matplotlib = matplotlib
         self.mpl_backend = matplotlib.rcParams['backend']
 
         # we also need to block switching of interactive backends by use()
         self.mpl_use = matplotlib.use
         self.mpl_use._called = False
         # overwrite the original matplotlib.use with our wrapper
         matplotlib.use = use
 
         # This must be imported last in the matplotlib series, after
         # backend/interactivity choices have been made
         import matplotlib.pylab as pylab
         self.pylab = pylab
 
         self.pylab.show._needmain = False
         # We need to detect at runtime whether show() is called by the user.
         # For this, we wrap it into a decorator which adds a 'called' flag.
         self.pylab.draw_if_interactive = flag_calls(self.pylab.draw_if_interactive)
 
         # Build a user namespace initialized with matplotlib/matlab features.
         user_ns = IPython.ipapi.make_user_ns(user_ns)
 
         exec ("import matplotlib\n"
               "import matplotlib.pylab as pylab\n") in user_ns
         
         # Build matplotlib info banner
         b="""
   Welcome to pylab, a matplotlib-based Python environment.
   For more information, type 'help(pylab)'.
 """
         return user_ns,b
 
     def mplot_exec(self,fname,*where,**kw):
         """Execute a matplotlib script.
 
         This is a call to execfile(), but wrapped in safeties to properly
         handle interactive rendering and backend switching."""
 
         #print '*** Matplotlib runner ***' # dbg
         # turn off rendering until end of script
         isInteractive = self.matplotlib.rcParams['interactive']
         self.matplotlib.interactive(False)
         self.safe_execfile(fname,*where,**kw)
         self.matplotlib.interactive(isInteractive)
         # make rendering call now, if the user tried to do it
         if self.pylab.draw_if_interactive.called:
             self.pylab.draw()
             self.pylab.draw_if_interactive.called = False
                 
         # if a backend switch was performed, reverse it now
         if self.mpl_use._called:
             self.matplotlib.rcParams['backend'] = self.mpl_backend
         
     def magic_run(self,parameter_s=''):
         Magic.magic_run(self,parameter_s,runner=self.mplot_exec)
 
     # Fix the docstring so users see the original as well
     magic_run.__doc__ = "%s\n%s" % (Magic.magic_run.__doc__,
                                     "\n        *** Modified %run for Matplotlib,"
                                     " with proper interactive handling ***")
 
 # Now we provide 2 versions of a matplotlib-aware IPython base shells, single
 # and multithreaded.  Note that these are meant for internal use, the IPShell*
 # classes below are the ones meant for public consumption.
 
 class MatplotlibShell(MatplotlibShellBase,InteractiveShell):
     """Single-threaded shell with matplotlib support."""
 
     def __init__(self,name,usage=None,rc=Struct(opts=None,args=None),
                  user_ns=None,user_global_ns=None,**kw):
         user_ns,b2 = self._matplotlib_config(name,user_ns)
         InteractiveShell.__init__(self,name,usage,rc,user_ns,user_global_ns,
                                   banner2=b2,**kw)
 
 class MatplotlibMTShell(MatplotlibShellBase,MTInteractiveShell):
     """Multi-threaded shell with matplotlib support."""
 
     def __init__(self,name,usage=None,rc=Struct(opts=None,args=None),
                  user_ns=None,user_global_ns=None, **kw):
         user_ns,b2 = self._matplotlib_config(name,user_ns)
         MTInteractiveShell.__init__(self,name,usage,rc,user_ns,user_global_ns,
                                     banner2=b2,**kw)
 
 #-----------------------------------------------------------------------------
 # Utility functions for the different GUI enabled IPShell* classes.
 
 def get_tk():
     """Tries to import Tkinter and returns a withdrawn Tkinter root
     window.  If Tkinter is already imported or not available, this
     returns None.  This function calls `hijack_tk` underneath.
     """
     if not USE_TK or sys.modules.has_key('Tkinter'):
         return None
     else:
         try:
             import Tkinter
         except ImportError:
             return None
         else:
             hijack_tk()
             r = Tkinter.Tk()
             r.withdraw()
             return r
 
 def hijack_tk():
     """Modifies Tkinter's mainloop with a dummy so when a module calls
     mainloop, it does not block.
 
     """
     def misc_mainloop(self, n=0):
         pass
     def tkinter_mainloop(n=0):
         pass
     
     import Tkinter
     Tkinter.Misc.mainloop = misc_mainloop
     Tkinter.mainloop = tkinter_mainloop
 
 def update_tk(tk):
     """Updates the Tkinter event loop.  This is typically called from
     the respective WX or GTK mainloops.
     """    
     if tk:
         tk.update()
 
 def hijack_wx():
     """Modifies wxPython's MainLoop with a dummy so user code does not
     block IPython.  The hijacked mainloop function is returned.
     """    
     def dummy_mainloop(*args, **kw):
         pass
 
     try:
         import wx
     except ImportError:
         # For very old versions of WX
         import wxPython as wx
         
     ver = wx.__version__
     orig_mainloop = None
     if ver[:3] >= '2.5':
         import wx
         if hasattr(wx, '_core_'): core = getattr(wx, '_core_')
         elif hasattr(wx, '_core'): core = getattr(wx, '_core')
         else: raise AttributeError('Could not find wx core module')
         orig_mainloop = core.PyApp_MainLoop
         core.PyApp_MainLoop = dummy_mainloop
     elif ver[:3] == '2.4':
         orig_mainloop = wx.wxc.wxPyApp_MainLoop
         wx.wxc.wxPyApp_MainLoop = dummy_mainloop
     else:
         warn("Unable to find either wxPython version 2.4 or >= 2.5.")
     return orig_mainloop
 
 def hijack_gtk():
     """Modifies pyGTK's mainloop with a dummy so user code does not
     block IPython.  This function returns the original `gtk.mainloop`
     function that has been hijacked.
     """    
     def dummy_mainloop(*args, **kw):
         pass
     import gtk
     if gtk.pygtk_version >= (2,4,0): orig_mainloop = gtk.main
     else:                            orig_mainloop = gtk.mainloop
     gtk.mainloop = dummy_mainloop
     gtk.main = dummy_mainloop
     return orig_mainloop
 
 def hijack_qt():
     """Modifies PyQt's mainloop with a dummy so user code does not 
     block IPython.  This function returns the original 
     `qt.qApp.exec_loop` function that has been hijacked.
     """    
     def dummy_mainloop(*args, **kw):
         pass
     import qt
     orig_mainloop = qt.qApp.exec_loop
     qt.qApp.exec_loop = dummy_mainloop
     qt.QApplication.exec_loop = dummy_mainloop
     return orig_mainloop
 
 def hijack_qt4():
     """Modifies PyQt4's mainloop with a dummy so user code does not
     block IPython.  This function returns the original 
     `QtGui.qApp.exec_` function that has been hijacked.
     """    
     def dummy_mainloop(*args, **kw):
         pass
     from PyQt4 import QtGui, QtCore
     orig_mainloop = QtGui.qApp.exec_
     QtGui.qApp.exec_ = dummy_mainloop
     QtGui.QApplication.exec_ = dummy_mainloop
     QtCore.QCoreApplication.exec_ = dummy_mainloop
     return orig_mainloop
 
 #-----------------------------------------------------------------------------
 # The IPShell* classes below are the ones meant to be run by external code as
 # IPython instances.  Note that unless a specific threading strategy is
 # desired, the factory function start() below should be used instead (it
 # selects the proper threaded class).
 
 class IPThread(threading.Thread):
     def run(self):
         self.IP.mainloop(self._banner)
         self.IP.kill()
 
 class IPShellGTK(IPThread):
     """Run a gtk mainloop() in a separate thread.
     
     Python commands can be passed to the thread where they will be executed.
     This is implemented by periodically checking for passed code using a
     GTK timeout callback."""
     
     TIMEOUT = 100 # Millisecond interval between timeouts.
 
     def __init__(self,argv=None,user_ns=None,user_global_ns=None,
                  debug=1,shell_class=MTInteractiveShell):
 
         import gtk
         
         self.gtk = gtk
         self.gtk_mainloop = hijack_gtk()
 
         # Allows us to use both Tk and GTK.
         self.tk = get_tk()
         
         if gtk.pygtk_version >= (2,4,0): mainquit = self.gtk.main_quit
         else:                            mainquit = self.gtk.mainquit
 
         self.IP = make_IPython(argv,user_ns=user_ns,
                                user_global_ns=user_global_ns,
                                debug=debug,
                                shell_class=shell_class,
                                on_kill=[mainquit])
 
         # HACK: slot for banner in self; it will be passed to the mainloop
         # method only and .run() needs it.  The actual value will be set by
         # .mainloop().
         self._banner = None 
 
         threading.Thread.__init__(self)
 
     def mainloop(self,sys_exit=0,banner=None):
 
         self._banner = banner
         
         if self.gtk.pygtk_version >= (2,4,0):
             import gobject
             gobject.idle_add(self.on_timer)
         else:
             self.gtk.idle_add(self.on_timer)
 
         if sys.platform != 'win32':
             try:
                 if self.gtk.gtk_version[0] >= 2:
                     self.gtk.gdk.threads_init()
             except AttributeError:
                 pass
             except RuntimeError:
                 error('Your pyGTK likely has not been compiled with '
                       'threading support.\n'
                       'The exception printout is below.\n'
                       'You can either rebuild pyGTK with threads, or '
                       'try using \n'
                       'matplotlib with a different backend (like Tk or WX).\n'
                       'Note that matplotlib will most likely not work in its '
                       'current state!')
                 self.IP.InteractiveTB()
 
         self.start()
         self.gtk.gdk.threads_enter()
         self.gtk_mainloop()
         self.gtk.gdk.threads_leave()
         self.join()
 
     def on_timer(self):
         """Called when GTK is idle.
 
         Must return True always, otherwise GTK stops calling it"""
         
         update_tk(self.tk)
         self.IP.runcode()
         time.sleep(0.01)
         return True
 
 
 class IPShellWX(IPThread):
     """Run a wx mainloop() in a separate thread.
     
     Python commands can be passed to the thread where they will be executed.
     This is implemented by periodically checking for passed code using a
     GTK timeout callback."""
     
     TIMEOUT = 100 # Millisecond interval between timeouts.
 
     def __init__(self,argv=None,user_ns=None,user_global_ns=None,
                  debug=1,shell_class=MTInteractiveShell):
 
         self.IP = make_IPython(argv,user_ns=user_ns,
                                user_global_ns=user_global_ns,
                                debug=debug,
                                shell_class=shell_class,
                                on_kill=[self.wxexit])
 
         wantedwxversion=self.IP.rc.wxversion
         if wantedwxversion!="0":
             try:
                 import wxversion
             except ImportError:
                 error('The wxversion module is needed for WX version selection')
             else:
                 try:
                     wxversion.select(wantedwxversion)
                 except:
                     self.IP.InteractiveTB()
                     error('Requested wxPython version %s could not be loaded' %
                                                                wantedwxversion)
 
         import wx
 
         threading.Thread.__init__(self)
         self.wx = wx
         self.wx_mainloop = hijack_wx()
 
         # Allows us to use both Tk and GTK.
         self.tk = get_tk()
         
         # HACK: slot for banner in self; it will be passed to the mainloop
         # method only and .run() needs it.  The actual value will be set by
         # .mainloop().
         self._banner = None 
 
         self.app = None
 
     def wxexit(self, *args):
         if self.app is not None:
             self.app.agent.timer.Stop()
             self.app.ExitMainLoop()
 
     def mainloop(self,sys_exit=0,banner=None):
 
         self._banner = banner
         
         self.start()
 
         class TimerAgent(self.wx.MiniFrame):
             wx = self.wx
             IP = self.IP
             tk = self.tk
             def __init__(self, parent, interval):
                 style = self.wx.DEFAULT_FRAME_STYLE | self.wx.TINY_CAPTION_HORIZ
                 self.wx.MiniFrame.__init__(self, parent, -1, ' ', pos=(200, 200),
                                              size=(100, 100),style=style)
                 self.Show(False)
                 self.interval = interval
                 self.timerId = self.wx.NewId()                                
 
             def StartWork(self):
                 self.timer = self.wx.Timer(self, self.timerId)
                 self.wx.EVT_TIMER(self,  self.timerId, self.OnTimer)
                 self.timer.Start(self.interval)
 
             def OnTimer(self, event):
                 update_tk(self.tk)
                 self.IP.runcode()
 
         class App(self.wx.App):
             wx = self.wx
             TIMEOUT = self.TIMEOUT
             def OnInit(self):
                 'Create the main window and insert the custom frame'
                 self.agent = TimerAgent(None, self.TIMEOUT)
                 self.agent.Show(False)
                 self.agent.StartWork()
                 return True
 
         self.app = App(redirect=False)
         self.wx_mainloop(self.app)
         self.join()
 
 
 class IPShellQt(IPThread):
     """Run a Qt event loop in a separate thread.
     
     Python commands can be passed to the thread where they will be executed.
     This is implemented by periodically checking for passed code using a
     Qt timer / slot."""
     
     TIMEOUT = 100 # Millisecond interval between timeouts.
 
     def __init__(self, argv=None, user_ns=None, user_global_ns=None,
                  debug=0, shell_class=MTInteractiveShell):
 
         import qt
 
         self.exec_loop = hijack_qt()
 
         # Allows us to use both Tk and QT.
         self.tk = get_tk()
 
         self.IP = make_IPython(argv,
                                user_ns=user_ns,
                                user_global_ns=user_global_ns,
                                debug=debug,
                                shell_class=shell_class,
                                on_kill=[qt.qApp.exit])
 
         # HACK: slot for banner in self; it will be passed to the mainloop
         # method only and .run() needs it.  The actual value will be set by
         # .mainloop().
         self._banner = None 
         
         threading.Thread.__init__(self)
 
     def mainloop(self, sys_exit=0, banner=None):
 
         import qt
 
         self._banner = banner
 
         if qt.QApplication.startingUp():
             a = qt.QApplication(sys.argv)
 
         self.timer = qt.QTimer()
         qt.QObject.connect(self.timer,
                            qt.SIGNAL('timeout()'),
                            self.on_timer)
 
         self.start()
         self.timer.start(self.TIMEOUT, True)
         while True:
             if self.IP._kill: break
             self.exec_loop()
         self.join()
 
     def on_timer(self):
         update_tk(self.tk)
         result = self.IP.runcode()
         self.timer.start(self.TIMEOUT, True)
         return result
 
 
 class IPShellQt4(IPThread):
     """Run a Qt event loop in a separate thread.
 
     Python commands can be passed to the thread where they will be executed.
     This is implemented by periodically checking for passed code using a
     Qt timer / slot."""
 
     TIMEOUT = 100 # Millisecond interval between timeouts.
 
     def __init__(self, argv=None, user_ns=None, user_global_ns=None,
                  debug=0, shell_class=MTInteractiveShell):
 
         from PyQt4 import QtCore, QtGui
 
         try:
             # present in PyQt4-4.2.1 or later
             QtCore.pyqtRemoveInputHook()
         except AttributeError:
             pass
 
         if QtCore.PYQT_VERSION_STR == '4.3':
             warn('''PyQt4 version 4.3 detected.
 If you experience repeated threading warnings, please update PyQt4.
 ''')
 
         self.exec_ = hijack_qt4()
 
         # Allows us to use both Tk and QT.
         self.tk = get_tk()
 
         self.IP = make_IPython(argv,
                                user_ns=user_ns,
                                user_global_ns=user_global_ns,
                                debug=debug,
                                shell_class=shell_class,
                                on_kill=[QtGui.qApp.exit])
 
         # HACK: slot for banner in self; it will be passed to the mainloop
         # method only and .run() needs it.  The actual value will be set by
         # .mainloop().
         self._banner = None
 
         threading.Thread.__init__(self)
 
     def mainloop(self, sys_exit=0, banner=None):
 
         from PyQt4 import QtCore, QtGui
 
         self._banner = banner
 
         if QtGui.QApplication.startingUp():
             a = QtGui.QApplication(sys.argv)
 
         self.timer = QtCore.QTimer()
         QtCore.QObject.connect(self.timer,
                                QtCore.SIGNAL('timeout()'),
                                self.on_timer)
 
         self.start()
         self.timer.start(self.TIMEOUT)
         while True:
             if self.IP._kill: break
             self.exec_()
         self.join()
 
     def on_timer(self):
         update_tk(self.tk)
         result = self.IP.runcode()
         self.timer.start(self.TIMEOUT)
         return result
 
 
 # A set of matplotlib public IPython shell classes, for single-threaded (Tk*
 # and FLTK*) and multithreaded (GTK*, WX* and Qt*) backends to use.
 def _load_pylab(user_ns):
     """Allow users to disable pulling all of pylab into the top-level
     namespace.
 
     This little utility must be called AFTER the actual ipython instance is
     running, since only then will the options file have been fully parsed."""
     
     ip = IPython.ipapi.get()
     if ip.options.pylab_import_all:
         ip.ex("from matplotlib.pylab import *")
         ip.IP.user_config_ns.update(ip.user_ns)
         
 
 class IPShellMatplotlib(IPShell):
     """Subclass IPShell with MatplotlibShell as the internal shell.
 
     Single-threaded class, meant for the Tk* and FLTK* backends.
 
     Having this on a separate class simplifies the external driver code."""
     
     def __init__(self,argv=None,user_ns=None,user_global_ns=None,debug=1):
         IPShell.__init__(self,argv,user_ns,user_global_ns,debug,
                          shell_class=MatplotlibShell)
         _load_pylab(self.IP.user_ns)
 
 class IPShellMatplotlibGTK(IPShellGTK):
     """Subclass IPShellGTK with MatplotlibMTShell as the internal shell.
 
     Multi-threaded class, meant for the GTK* backends."""
     
     def __init__(self,argv=None,user_ns=None,user_global_ns=None,debug=1):
         IPShellGTK.__init__(self,argv,user_ns,user_global_ns,debug,
                             shell_class=MatplotlibMTShell)
         _load_pylab(self.IP.user_ns)
 
 class IPShellMatplotlibWX(IPShellWX):
     """Subclass IPShellWX with MatplotlibMTShell as the internal shell.
 
     Multi-threaded class, meant for the WX* backends."""
     
     def __init__(self,argv=None,user_ns=None,user_global_ns=None,debug=1):
         IPShellWX.__init__(self,argv,user_ns,user_global_ns,debug,
                            shell_class=MatplotlibMTShell)
         _load_pylab(self.IP.user_ns)
 
 class IPShellMatplotlibQt(IPShellQt):
     """Subclass IPShellQt with MatplotlibMTShell as the internal shell.
 
     Multi-threaded class, meant for the Qt* backends."""
     
     def __init__(self,argv=None,user_ns=None,user_global_ns=None,debug=1):
         IPShellQt.__init__(self,argv,user_ns,user_global_ns,debug,
                            shell_class=MatplotlibMTShell)
         _load_pylab(self.IP.user_ns)
 
 class IPShellMatplotlibQt4(IPShellQt4):
     """Subclass IPShellQt4 with MatplotlibMTShell as the internal shell.
 
     Multi-threaded class, meant for the Qt4* backends."""
 
     def __init__(self,argv=None,user_ns=None,user_global_ns=None,debug=1):
         IPShellQt4.__init__(self,argv,user_ns,user_global_ns,debug,
                            shell_class=MatplotlibMTShell)
         _load_pylab(self.IP.user_ns)
 
 #-----------------------------------------------------------------------------
 # Factory functions to actually start the proper thread-aware shell
 
 def _select_shell(argv):
     """Select a shell from the given argv vector.
 
     This function implements the threading selection policy, allowing runtime
     control of the threading mode, both for general users and for matplotlib.
 
     Return:
       Shell class to be instantiated for runtime operation.
     """
     
     global USE_TK
 
     mpl_shell = {'gthread' : IPShellMatplotlibGTK,
                  'wthread' : IPShellMatplotlibWX,
                  'qthread' : IPShellMatplotlibQt,
                  'q4thread' : IPShellMatplotlibQt4,
                  'tkthread' : IPShellMatplotlib,  # Tk is built-in
                  }
 
     th_shell = {'gthread' : IPShellGTK,
                 'wthread' : IPShellWX,
                 'qthread' : IPShellQt,
                 'q4thread' : IPShellQt4,
                 'tkthread' : IPShell, # Tk is built-in
                 }
 
     backends = {'gthread' : 'GTKAgg',
                 'wthread' : 'WXAgg',
                 'qthread' : 'QtAgg',
                 'q4thread' :'Qt4Agg',
                 'tkthread' :'TkAgg',
                 }
 
     all_opts = set(['tk','pylab','gthread','qthread','q4thread','wthread',
-                    'tkthread'])
+                    'tkthread', 'twisted'])
     user_opts = set([s.replace('-','') for s in argv[:3]])
     special_opts = user_opts & all_opts
 
+    if 'twisted' in special_opts:
+        import twshell
+        return twshell.IPShellTwisted
     if 'tk' in special_opts:
         USE_TK = True
         special_opts.remove('tk')
 
     if 'pylab' in special_opts:
 
         try:
             import matplotlib
         except ImportError:
             error('matplotlib could NOT be imported!  Starting normal IPython.')
             return IPShell
         
         special_opts.remove('pylab')
         # If there's any option left, it means the user wants to force the
         # threading backend, else it's auto-selected from the rc file
         if special_opts:
             th_mode = special_opts.pop()
             matplotlib.rcParams['backend'] = backends[th_mode]
         else:
             backend = matplotlib.rcParams['backend']
             if backend.startswith('GTK'):
                 th_mode = 'gthread'
             elif backend.startswith('WX'):
                 th_mode = 'wthread'
             elif backend.startswith('Qt4'):
                 th_mode = 'q4thread'
             elif backend.startswith('Qt'):
                 th_mode = 'qthread'
             else:
                 # Any other backend, use plain Tk
                 th_mode = 'tkthread'
                 
         return mpl_shell[th_mode]
     else:
         # No pylab requested, just plain threads
         try:
             th_mode = special_opts.pop()
         except KeyError:
             th_mode = 'tkthread'
         return th_shell[th_mode]
 
 
 # This is the one which should be called by external code.
 def start(user_ns = None):
     """Return a running shell instance, dealing with threading options.
 
     This is a factory function which will instantiate the proper IPython shell
     based on the user's threading choice.  Such a selector is needed because
     different GUI toolkits require different thread handling details."""
 
     shell = _select_shell(sys.argv)
     return shell(user_ns = user_ns)
 
 # Some aliases for backwards compatibility
 IPythonShell = IPShell
 IPythonShellEmbed = IPShellEmbed
 #************************ End of file <Shell.py> ***************************

IPython/ipmaker.py

@@ -1,775 +1,775 b''
 # -*- coding: utf-8 -*-
 """
 IPython -- An enhanced Interactive Python
 
 Requires Python 2.1 or better.
 
 This file contains the main make_IPython() starter function.
 
 $Id: ipmaker.py 2930 2008-01-11 07:03:11Z vivainio $"""
 
 #*****************************************************************************
 #       Copyright (C) 2001-2006 Fernando Perez. <[e-mail]>
 #
 #  Distributed under the terms of the BSD License.  The full license is in
 #  the file COPYING, distributed as part of this software.
 #*****************************************************************************
 
 from IPython import Release
 __author__  = '%s <%s>' % Release.authors['Fernando']
 __license__ = Release.license
 __version__ = Release.version
 
 try:
     credits._Printer__data = """
     Python: %s
 
     IPython: Fernando Perez, Janko Hauser, Nathan Gray, and many users.
     See http://ipython.scipy.org for more information.""" \
     % credits._Printer__data
 
     copyright._Printer__data += """
 
     Copyright (c) 2001-2004 Fernando Perez, Janko Hauser, Nathan Gray.
     All Rights Reserved."""
 except NameError:
     # Can happen if ipython was started with 'python -S', so that site.py is
     # not loaded
     pass
 
 #****************************************************************************
 # Required modules
 
 # From the standard library
 import __main__
 import __builtin__
 import os
 import re
 import sys
 import types
 from pprint import pprint,pformat
 
 # Our own
 from IPython import DPyGetOpt
 from IPython.ipstruct import Struct
 from IPython.OutputTrap import OutputTrap
 from IPython.ConfigLoader import ConfigLoader
 from IPython.iplib import InteractiveShell
 from IPython.usage import cmd_line_usage,interactive_usage
 from IPython.genutils import *
 
 def force_import(modname):
     if modname in sys.modules:
         print "reload",modname
         reload(sys.modules[modname])
     else:
         __import__(modname)
         
 
 #-----------------------------------------------------------------------------
 def make_IPython(argv=None,user_ns=None,user_global_ns=None,debug=1,
                  rc_override=None,shell_class=InteractiveShell,
                  embedded=False,**kw):
     """This is a dump of IPython into a single function.
 
     Later it will have to be broken up in a sensible manner.
 
     Arguments:
 
     - argv: a list similar to sys.argv[1:].  It should NOT contain the desired
     script name, b/c DPyGetOpt strips the first argument only for the real
     sys.argv.
 
     - user_ns: a dict to be used as the user's namespace."""
 
     #----------------------------------------------------------------------
     # Defaults and initialization
     
     # For developer debugging, deactivates crash handler and uses pdb.
     DEVDEBUG = False
 
     if argv is None:
         argv = sys.argv
 
     # __IP is the main global that lives throughout and represents the whole
     # application. If the user redefines it, all bets are off as to what
     # happens.
 
     # __IP is the name of he global which the caller will have accessible as
     # __IP.name. We set its name via the first parameter passed to
     # InteractiveShell:
 
     IP = shell_class('__IP',user_ns=user_ns,user_global_ns=user_global_ns,
                      embedded=embedded,**kw)
 
     # Put 'help' in the user namespace
     from site import _Helper
     IP.user_config_ns = {}
     IP.user_ns['help'] = _Helper()
 
 
     if DEVDEBUG:
         # For developer debugging only (global flag)
         from IPython import ultraTB
         sys.excepthook = ultraTB.VerboseTB(call_pdb=1)
 
     IP.BANNER_PARTS = ['Python %s\n'
                          'Type "copyright", "credits" or "license" '
                          'for more information.\n'
                          % (sys.version.split('\n')[0],),
                          "IPython %s -- An enhanced Interactive Python."
                          % (__version__,),
 """\
 ?         -> Introduction and overview of IPython's features.
 %quickref -> Quick reference.
 help      -> Python's own help system.
 object?   -> Details about 'object'. ?object also works, ?? prints more.
 """ ]
 
     IP.usage = interactive_usage
 
     # Platform-dependent suffix and directory names.  We use _ipython instead
     # of .ipython under win32 b/c there's software that breaks with .named
     # directories on that platform.
     if os.name == 'posix':
         rc_suffix = ''
         ipdir_def = '.ipython'
     else:
         rc_suffix = '.ini'
         ipdir_def = '_ipython'
 
     # default directory for configuration
     ipythondir_def = os.path.abspath(os.environ.get('IPYTHONDIR',
                                  os.path.join(IP.home_dir,ipdir_def)))
 
     sys.path.insert(0, '') # add . to sys.path. Fix from Prabhu Ramachandran
 
     # we need the directory where IPython itself is installed
     import IPython
     IPython_dir = os.path.dirname(IPython.__file__)
     del IPython
     
     #-------------------------------------------------------------------------
     # Command line handling
 
     # Valid command line options (uses DPyGetOpt syntax, like Perl's
     # GetOpt::Long)
 
     # Any key not listed here gets deleted even if in the file (like session
     # or profile). That's deliberate, to maintain the rc namespace clean.
 
     # Each set of options appears twice: under _conv only the names are
     # listed, indicating which type they must be converted to when reading the
     # ipythonrc file. And under DPyGetOpt they are listed with the regular
     # DPyGetOpt syntax (=s,=i,:f,etc).
 
     # Make sure there's a space before each end of line (they get auto-joined!)
     cmdline_opts = ('autocall=i autoindent! automagic! banner! cache_size|cs=i '
                     'c=s classic|cl color_info! colors=s confirm_exit! '
                     'debug! deep_reload! editor=s log|l messages! nosep '
                     'object_info_string_level=i pdb! '
                     'pprint! prompt_in1|pi1=s prompt_in2|pi2=s prompt_out|po=s '
                     'pydb! '
                     'pylab_import_all! '
                     'quick screen_length|sl=i prompts_pad_left=i '
                     'logfile|lf=s logplay|lp=s profile|p=s '
                     'readline! readline_merge_completions! '
                     'readline_omit__names! '
                     'rcfile=s separate_in|si=s separate_out|so=s '
                     'separate_out2|so2=s xmode=s wildcards_case_sensitive! '
                     'magic_docstrings system_verbose! '
                     'multi_line_specials! '
                     'term_title! wxversion=s '
                     'autoedit_syntax!')
 
     # Options that can *only* appear at the cmd line (not in rcfiles).
     
-    # The "ignore" option is a kludge so that Emacs buffers don't crash, since
-    # the 'C-c !' command in emacs automatically appends a -i option at the end.
     cmdline_only = ('help interact|i ipythondir=s Version upgrade '
-                    'gthread! qthread! q4thread! wthread! tkthread! pylab! tk!')
+                    'gthread! qthread! q4thread! wthread! tkthread! pylab! tk! '
+                    'twisted!')
 
     # Build the actual name list to be used by DPyGetOpt
     opts_names = qw(cmdline_opts) + qw(cmdline_only)
 
     # Set sensible command line defaults.
     # This should have everything from  cmdline_opts and cmdline_only
     opts_def = Struct(autocall = 1,
                       autoedit_syntax = 0,
                       autoindent = 0,
                       automagic = 1,
                       autoexec = [],
                       banner = 1,
                       c = '',
                       cache_size = 1000,
                       classic = 0,
                       color_info = 0,
                       colors = 'NoColor',
                       confirm_exit = 1,
                       debug = 0,
                       deep_reload = 0,
                       editor = '0',
                       gthread = 0,
                       help = 0,
                       interact = 1,
                       ipythondir = ipythondir_def,
                       log = 0,
                       logfile = '',
                       logplay = '',
                       messages = 1,
                       multi_line_specials = 1,
                       nosep = 0,
                       object_info_string_level = 0,
                       pdb = 0,
                       pprint = 0,
                       profile = '',
                       prompt_in1 = 'In [\\#]: ',
                       prompt_in2 = '   .\\D.: ',
                       prompt_out = 'Out[\\#]: ',
                       prompts_pad_left = 1,
                       pylab = 0,
                       pylab_import_all = 1,
                       q4thread = 0,
                       qthread = 0,
                       quick = 0,
                       quiet = 0,
                       rcfile = 'ipythonrc' + rc_suffix,
                       readline = 1,
                       readline_merge_completions = 1,
                       readline_omit__names = 0,
                       screen_length = 0,
                       separate_in = '\n',
                       separate_out = '\n',
                       separate_out2 = '',
                       system_header = 'IPython system call: ',
                       system_verbose = 0,
                       term_title = 1,
                       tk = 0,
+                      twisted= 0,
                       upgrade = 0,
                       Version = 0,
                       wildcards_case_sensitive = 1,
                       wthread = 0,
                       wxversion = '0',
                       xmode = 'Context',
                       magic_docstrings = 0,  # undocumented, for doc generation
                       )
     
     # Things that will *only* appear in rcfiles (not at the command line).
     # Make sure there's a space before each end of line (they get auto-joined!)
     rcfile_opts = { qwflat: 'include import_mod import_all execfile ',
                     qw_lol: 'import_some ',
                     # for things with embedded whitespace:
                     list_strings:'execute alias readline_parse_and_bind ',
                     # Regular strings need no conversion:
                     None:'readline_remove_delims ',
                     }
     # Default values for these
     rc_def = Struct(include = [],
                     import_mod = [], 
                     import_all = [],
                     import_some = [[]],
                     execute = [],
                     execfile = [],
                     alias = [],
                     readline_parse_and_bind = [],
                     readline_remove_delims = '',
                     )
 
     # Build the type conversion dictionary from the above tables:
     typeconv = rcfile_opts.copy()
     typeconv.update(optstr2types(cmdline_opts))
 
     # FIXME: the None key appears in both, put that back together by hand. Ugly!
     typeconv[None] += ' ' + rcfile_opts[None]
 
     # Remove quotes at ends of all strings (used to protect spaces)
     typeconv[unquote_ends] = typeconv[None]
     del typeconv[None]
 
     # Build the list we'll use to make all config decisions with defaults:
     opts_all = opts_def.copy()
     opts_all.update(rc_def)
 
     # Build conflict resolver for recursive loading of config files:
     # - preserve means the outermost file maintains the value, it is not
     # overwritten if an included file has the same key.
     # - add_flip applies + to the two values, so it better make sense to add
     # those types of keys. But it flips them first so that things loaded
     # deeper in the inclusion chain have lower precedence.
     conflict = {'preserve': ' '.join([ typeconv[int],
                                        typeconv[unquote_ends] ]),
                 'add_flip': ' '.join([ typeconv[qwflat],
                                        typeconv[qw_lol],
                                        typeconv[list_strings] ])
                 }
 
     # Now actually process the command line
     getopt = DPyGetOpt.DPyGetOpt()
     getopt.setIgnoreCase(0)
 
     getopt.parseConfiguration(opts_names)
 
     try:
         getopt.processArguments(argv)
     except DPyGetOpt.ArgumentError, exc:
         print cmd_line_usage
         warn('\nError in Arguments: "%s"' % exc)
         sys.exit(1)
 
     # convert the options dict to a struct for much lighter syntax later
     opts = Struct(getopt.optionValues)
     args = getopt.freeValues
 
     # this is the struct (which has default values at this point) with which
     # we make all decisions:
     opts_all.update(opts)
 
     # Options that force an immediate exit
     if opts_all.help:
         page(cmd_line_usage)
         sys.exit()
 
     if opts_all.Version:
         print __version__
         sys.exit()
 
     if opts_all.magic_docstrings:
         IP.magic_magic('-latex')
         sys.exit()
 
     # add personal ipythondir to sys.path so that users can put things in
     # there for customization
     sys.path.append(os.path.abspath(opts_all.ipythondir))
 
     # Create user config directory if it doesn't exist. This must be done
     # *after* getting the cmd line options.
     if not os.path.isdir(opts_all.ipythondir):
         IP.user_setup(opts_all.ipythondir,rc_suffix,'install')
 
     # upgrade user config files while preserving a copy of the originals
     if opts_all.upgrade:
         IP.user_setup(opts_all.ipythondir,rc_suffix,'upgrade')
 
     # check mutually exclusive options in the *original* command line
     mutex_opts(opts,[qw('log logfile'),qw('rcfile profile'),
                      qw('classic profile'),qw('classic rcfile')])
 
     #---------------------------------------------------------------------------
     # Log replay
     
     # if -logplay, we need to 'become' the other session. That basically means
     # replacing the current command line environment with that of the old
     # session and moving on.
 
     # this is needed so that later we know we're in session reload mode, as
     # opts_all will get overwritten:
     load_logplay = 0
 
     if opts_all.logplay:
         load_logplay = opts_all.logplay 
         opts_debug_save = opts_all.debug
         try:
             logplay = open(opts_all.logplay)
         except IOError:
             if opts_all.debug: IP.InteractiveTB()
             warn('Could not open logplay file '+`opts_all.logplay`)
             # restore state as if nothing had happened and move on, but make
             # sure that later we don't try to actually load the session file
             logplay = None
             load_logplay = 0
             del opts_all.logplay
         else:
             try: 
                 logplay.readline()
                 logplay.readline();
                 # this reloads that session's command line
                 cmd = logplay.readline()[6:] 
                 exec cmd
                 # restore the true debug flag given so that the process of
                 # session loading itself can be monitored.
                 opts.debug = opts_debug_save
                 # save the logplay flag so later we don't overwrite the log
                 opts.logplay = load_logplay
                 # now we must update our own structure with defaults
                 opts_all.update(opts)
                 # now load args
                 cmd = logplay.readline()[6:] 
                 exec cmd
                 logplay.close()
             except:
                 logplay.close()
                 if opts_all.debug: IP.InteractiveTB()
                 warn("Logplay file lacking full configuration information.\n"
                      "I'll try to read it, but some things may not work.")
 
     #-------------------------------------------------------------------------
     # set up output traps: catch all output from files, being run, modules
     # loaded, etc. Then give it to the user in a clean form at the end.
     
     msg_out = 'Output messages. '
     msg_err = 'Error messages. '
     msg_sep = '\n'
     msg = Struct(config    = OutputTrap('Configuration Loader',msg_out,
                                         msg_err,msg_sep,debug,
                                         quiet_out=1),
                  user_exec = OutputTrap('User File Execution',msg_out,
                                         msg_err,msg_sep,debug),
                  logplay   = OutputTrap('Log Loader',msg_out,
                                         msg_err,msg_sep,debug),
                  summary = ''
                  )
 
     #-------------------------------------------------------------------------
     # Process user ipythonrc-type configuration files
 
     # turn on output trapping and log to msg.config
     # remember that with debug on, trapping is actually disabled
     msg.config.trap_all()
 
     # look for rcfile in current or default directory
     try:
         opts_all.rcfile = filefind(opts_all.rcfile,opts_all.ipythondir)
     except IOError:
         if opts_all.debug:  IP.InteractiveTB()
         warn('Configuration file %s not found. Ignoring request.'
              % (opts_all.rcfile) )
 
     # 'profiles' are a shorthand notation for config filenames
     profile_handled_by_legacy = False
     if opts_all.profile:
             
         try:
             opts_all.rcfile = filefind('ipythonrc-' + opts_all.profile
                                        + rc_suffix,
                                        opts_all.ipythondir)
             profile_handled_by_legacy = True
         except IOError:
            if opts_all.debug:  IP.InteractiveTB()
            opts.profile = ''  # remove profile from options if invalid
            # We won't warn anymore, primary method is ipy_profile_PROFNAME
            # which does trigger a warning.
 
     # load the config file
     rcfiledata = None
     if opts_all.quick:
         print 'Launching IPython in quick mode. No config file read.'
     elif opts_all.rcfile:
         try:
             cfg_loader = ConfigLoader(conflict)
             rcfiledata = cfg_loader.load(opts_all.rcfile,typeconv,
                                          'include',opts_all.ipythondir,
                                          purge = 1,
                                          unique = conflict['preserve'])
         except:
             IP.InteractiveTB()
             warn('Problems loading configuration file '+
                  `opts_all.rcfile`+
                  '\nStarting with default -bare bones- configuration.')
     else:
         warn('No valid configuration file found in either currrent directory\n'+
              'or in the IPython config. directory: '+`opts_all.ipythondir`+
              '\nProceeding with internal defaults.')
 
     #------------------------------------------------------------------------
     # Set exception handlers in mode requested by user.
     otrap = OutputTrap(trap_out=1)  # trap messages from magic_xmode
     IP.magic_xmode(opts_all.xmode)
     otrap.release_out()
 
     #------------------------------------------------------------------------
     # Execute user config
 
     # Create a valid config structure with the right precedence order:
     # defaults < rcfile < command line.  This needs to be in the instance, so
     # that method calls below that rely on it find it.
     IP.rc = rc_def.copy()
 
     # Work with a local alias inside this routine to avoid unnecessary
     # attribute lookups.
     IP_rc = IP.rc
     
     IP_rc.update(opts_def)
     if rcfiledata:
         # now we can update 
         IP_rc.update(rcfiledata)
     IP_rc.update(opts)
     IP_rc.update(rc_override)
 
     # Store the original cmd line for reference:
     IP_rc.opts = opts
     IP_rc.args = args
 
     # create a *runtime* Struct like rc for holding parameters which may be
     # created and/or modified by runtime user extensions.
     IP.runtime_rc = Struct()
 
     # from this point on, all config should be handled through IP_rc,
     # opts* shouldn't be used anymore.
 
     
     # update IP_rc with some special things that need manual
     # tweaks. Basically options which affect other options. I guess this
     # should just be written so that options are fully orthogonal and we
     # wouldn't worry about this stuff!
 
     if IP_rc.classic:
         IP_rc.quick = 1
         IP_rc.cache_size = 0
         IP_rc.pprint = 0
         IP_rc.prompt_in1 = '>>> '
         IP_rc.prompt_in2 = '... '
         IP_rc.prompt_out = ''
         IP_rc.separate_in = IP_rc.separate_out = IP_rc.separate_out2 = '0'
         IP_rc.colors = 'NoColor'
         IP_rc.xmode = 'Plain'
 
     IP.pre_config_initialization()
     # configure readline
     # Define the history file for saving commands in between sessions
     if IP_rc.profile:
         histfname = 'history-%s' % IP_rc.profile
     else:
         histfname = 'history'
     IP.histfile = os.path.join(opts_all.ipythondir,histfname)
 
     # update exception handlers with rc file status
     otrap.trap_out()  # I don't want these messages ever.
     IP.magic_xmode(IP_rc.xmode)
     otrap.release_out()
 
     # activate logging if requested and not reloading a log
     if IP_rc.logplay:
         IP.magic_logstart(IP_rc.logplay + ' append')
     elif  IP_rc.logfile:
         IP.magic_logstart(IP_rc.logfile)
     elif IP_rc.log:
         IP.magic_logstart()
 
     # find user editor so that it we don't have to look it up constantly
     if IP_rc.editor.strip()=='0':
         try:
             ed = os.environ['EDITOR']
         except KeyError:
             if os.name == 'posix':
                 ed = 'vi'  # the only one guaranteed to be there!
             else:
                 ed = 'notepad' # same in Windows!
         IP_rc.editor = ed
 
     # Keep track of whether this is an embedded instance or not (useful for
     # post-mortems).
     IP_rc.embedded = IP.embedded
 
     # Recursive reload
     try:
         from IPython import deep_reload
         if IP_rc.deep_reload:
             __builtin__.reload = deep_reload.reload
         else:
             __builtin__.dreload = deep_reload.reload
         del deep_reload
     except ImportError:
         pass
 
     # Save the current state of our namespace so that the interactive shell
     # can later know which variables have been created by us from config files
     # and loading. This way, loading a file (in any way) is treated just like
     # defining things on the command line, and %who works as expected.
 
     # DON'T do anything that affects the namespace beyond this point!
     IP.internal_ns.update(__main__.__dict__)
 
     #IP.internal_ns.update(locals()) # so our stuff doesn't show up in %who
 
     # Now run through the different sections of the users's config
     if IP_rc.debug:    
         print 'Trying to execute the following configuration structure:'
         print '(Things listed first are deeper in the inclusion tree and get'
         print 'loaded first).\n'
         pprint(IP_rc.__dict__)
         
     for mod in IP_rc.import_mod:
         try:
             exec 'import '+mod in IP.user_ns
         except :
             IP.InteractiveTB()
             import_fail_info(mod)
 
     for mod_fn in IP_rc.import_some:
         if not mod_fn == []: 
             mod,fn = mod_fn[0],','.join(mod_fn[1:])
             try:
                 exec 'from '+mod+' import '+fn in IP.user_ns
             except :
                 IP.InteractiveTB()
                 import_fail_info(mod,fn)
 
     for mod in IP_rc.import_all:
         try:
             exec 'from '+mod+' import *' in IP.user_ns
         except :
             IP.InteractiveTB()
             import_fail_info(mod)
 
     for code in IP_rc.execute:
         try:
             exec code in IP.user_ns
         except:
             IP.InteractiveTB()
             warn('Failure executing code: ' + `code`)
 
     # Execute the files the user wants in ipythonrc
     for file in IP_rc.execfile:
         try:
             file = filefind(file,sys.path+[IPython_dir])
         except IOError:
             warn(itpl('File $file not found. Skipping it.'))
         else:
             IP.safe_execfile(os.path.expanduser(file),IP.user_ns)
 
     # finally, try importing ipy_*_conf for final configuration
     try:
         import ipy_system_conf
     except ImportError:
         if opts_all.debug:  IP.InteractiveTB()
         warn("Could not import 'ipy_system_conf'")        
     except:
         IP.InteractiveTB()
         import_fail_info('ipy_system_conf')
         
     # only import prof module if ipythonrc-PROF was not found
     if opts_all.profile and not profile_handled_by_legacy:
         profmodname = 'ipy_profile_' + opts_all.profile
         try:
             
             force_import(profmodname)
         except:
             IP.InteractiveTB()
             print "Error importing",profmodname,"- perhaps you should run %upgrade?"
             import_fail_info(profmodname)
     else:
         force_import('ipy_profile_none')
     try:
             
         force_import('ipy_user_conf')
         
     except:
         conf = opts_all.ipythondir + "/ipy_user_conf.py"
         IP.InteractiveTB()
         if not os.path.isfile(conf):
             warn(conf + ' does not exist, please run %upgrade!')
 
         import_fail_info("ipy_user_conf")
 
     # finally, push the argv to options again to ensure highest priority
     IP_rc.update(opts)
     
     # release stdout and stderr and save config log into a global summary
     msg.config.release_all()
     if IP_rc.messages:
         msg.summary += msg.config.summary_all()
 
     #------------------------------------------------------------------------
     # Setup interactive session
 
     # Now we should be fully configured. We can then execute files or load
     # things only needed for interactive use. Then we'll open the shell.
 
     # Take a snapshot of the user namespace before opening the shell. That way
     # we'll be able to identify which things were interactively defined and
     # which were defined through config files.
     IP.user_config_ns.update(IP.user_ns)
 
     # Force reading a file as if it were a session log. Slower but safer.
     if load_logplay:
         print 'Replaying log...'
         try:
             if IP_rc.debug:
                 logplay_quiet = 0
             else:
                  logplay_quiet = 1
 
             msg.logplay.trap_all()
             IP.safe_execfile(load_logplay,IP.user_ns,
                              islog = 1, quiet = logplay_quiet)
             msg.logplay.release_all()
             if IP_rc.messages:
                 msg.summary += msg.logplay.summary_all()
         except:
             warn('Problems replaying logfile %s.' % load_logplay)
             IP.InteractiveTB()
 
     # Load remaining files in command line
     msg.user_exec.trap_all()
 
     # Do NOT execute files named in the command line as scripts to be loaded
     # by embedded instances.  Doing so has the potential for an infinite
     # recursion if there are exceptions thrown in the process.
 
     # XXX FIXME: the execution of user files should be moved out to after
     # ipython is fully initialized, just as if they were run via %run at the
     # ipython prompt.  This would also give them the benefit of ipython's
     # nice tracebacks.
 
     if (not embedded and IP_rc.args and 
         not IP_rc.args[0].lower().endswith('.ipy')):
         name_save = IP.user_ns['__name__']
         IP.user_ns['__name__'] = '__main__'
         # Set our own excepthook in case the user code tries to call it
         # directly. This prevents triggering the IPython crash handler.
         old_excepthook,sys.excepthook = sys.excepthook, IP.excepthook
 
         save_argv = sys.argv[1:] # save it for later restoring
         
         sys.argv = args
         
         try:
             IP.safe_execfile(args[0], IP.user_ns)
         finally:
             # Reset our crash handler in place
             sys.excepthook = old_excepthook
             sys.argv[:] = save_argv
             IP.user_ns['__name__'] = name_save
         
     msg.user_exec.release_all()
 
     if IP_rc.messages:
         msg.summary += msg.user_exec.summary_all()
 
     # since we can't specify a null string on the cmd line, 0 is the equivalent:
     if IP_rc.nosep:
         IP_rc.separate_in = IP_rc.separate_out = IP_rc.separate_out2 = '0'
     if IP_rc.separate_in == '0': IP_rc.separate_in = ''
     if IP_rc.separate_out == '0': IP_rc.separate_out = ''
     if IP_rc.separate_out2 == '0': IP_rc.separate_out2 = ''
     IP_rc.separate_in = IP_rc.separate_in.replace('\\n','\n')
     IP_rc.separate_out = IP_rc.separate_out.replace('\\n','\n')
     IP_rc.separate_out2 = IP_rc.separate_out2.replace('\\n','\n')
 
     # Determine how many lines at the bottom of the screen are needed for
     # showing prompts, so we can know wheter long strings are to be printed or
     # paged:
     num_lines_bot = IP_rc.separate_in.count('\n')+1
     IP_rc.screen_length = IP_rc.screen_length - num_lines_bot
 
     # configure startup banner
     if IP_rc.c:  # regular python doesn't print the banner with -c
         IP_rc.banner = 0
     if IP_rc.banner:
         BANN_P = IP.BANNER_PARTS
     else:
         BANN_P = []
 
     if IP_rc.profile: BANN_P.append('IPython profile: %s\n' % IP_rc.profile)
 
     # add message log (possibly empty)
     if msg.summary: BANN_P.append(msg.summary)
     # Final banner is a string
     IP.BANNER = '\n'.join(BANN_P)
 
     # Finalize the IPython instance.  This assumes the rc structure is fully
     # in place.
     IP.post_config_initialization()
 
     return IP
 #************************ end of file <ipmaker.py> **************************