doc fixes to logging

IPython/Logger.py

@@ -1,221 +1,221 b''
 # -*- coding: utf-8 -*-
 """
 Logger class for IPython's logging facilities.
 
-$Id: Logger.py 966 2005-12-29 08:34:07Z fperez $
+$Id: Logger.py 974 2005-12-29 19:48:33Z fperez $
 """
 
 #*****************************************************************************
 #       Copyright (C) 2001 Janko Hauser <[e-mail]> and
 #       Copyright (C) 2001-2005 Fernando Perez <[e-mail]>
 #
 #  Distributed under the terms of the BSD License.  The full license is in
 #  the file COPYING, distributed as part of this software.
 #*****************************************************************************
 
 #****************************************************************************
 # Modules and globals
 
 from IPython import Release
 __author__  = '%s <%s>\n%s <%s>' % \
               ( Release.authors['Janko'] + Release.authors['Fernando'] )
 __license__ = Release.license
 
 # Python standard modules
 import glob
 import os
 import time
 
 #****************************************************************************
 # FIXME: This class isn't a mixin anymore, but it still needs attributes from
 # ipython and does input cache management.  Finish cleanup later...
 
 class Logger(object):
     """A Logfile class with different policies for file creation"""
 
     def __init__(self,shell,logfname='Logger.log',loghead='',logmode='over'):
 
         self._i00,self._i,self._ii,self._iii = '','','',''
 
         # this is the full ipython instance, we need some attributes from it
         # which won't exist until later. What a mess, clean up later...
         self.shell = shell
 
         self.logfname = logfname
         self.loghead = loghead
         self.logmode = logmode
         self.logfile = None
 
         # whether to also log output
         self.log_output = False
 
         # whether to put timestamps before each log entry
         self.timestamp = False
 
         # activity control flags
         self.log_active = False
 
     # logmode is a validated property
     def _set_mode(self,mode):
         if mode not in ['append','backup','global','over','rotate']:
             raise ValueError,'invalid log mode %s given' % mode
         self._logmode = mode
 
     def _get_mode(self):
         return self._logmode
 
     logmode = property(_get_mode,_set_mode)
     
     def logstart(self,logfname=None,loghead=None,logmode=None,
                  log_output=False,timestamp=False):
         """Generate a new log-file with a default header.
 
         Raises RuntimeError if the log has already been started"""
 
         if self.logfile is not None:
             raise RuntimeError('Log file is already active: %s' %
                                self.logfname)
         
         self.log_active = True
 
         # The three parameters can override constructor defaults
         if logfname: self.logfname = logfname
         if loghead: self.loghead = loghead
         if logmode: self.logmode = logmode
         self.timestamp = timestamp
         self.log_output = log_output
         
         # init depending on the log mode requested
         isfile = os.path.isfile
         logmode = self.logmode
 
         if logmode == 'append':
             self.logfile = open(self.logfname,'a')
 
         elif logmode == 'backup':
             if isfile(self.logfname):
                 backup_logname = self.logfname+'~'
                 # Manually remove any old backup, since os.rename may fail
                 # under Windows.
                 if isfile(backup_logname):
                     os.remove(backup_logname)
                 os.rename(self.logfname,backup_logname)
             self.logfile = open(self.logfname,'w')
 
         elif logmode == 'global':
             self.logfname = os.path.join(self.shell.home_dir,self.logfname)
             self.logfile = open(self.logfname, 'a')
 
         elif logmode == 'over':
             if isfile(self.logfname):
                 os.remove(self.logfname) 
             self.logfile = open(self.logfname,'w')
 
         elif logmode == 'rotate':
             if isfile(self.logfname):
                 if isfile(self.logfname+'.001~'): 
                     old = glob.glob(self.logfname+'.*~')
                     old.sort()
                     old.reverse()
                     for f in old:
                         root, ext = os.path.splitext(f)
                         num = int(ext[1:-1])+1
                         os.rename(f, root+'.'+`num`.zfill(3)+'~')
                 os.rename(self.logfname, self.logfname+'.001~')
             self.logfile = open(self.logfname,'w')
             
         if logmode != 'append':
             self.logfile.write(self.loghead)
 
         self.logfile.flush()
 
     def switch_log(self,val):
         """Switch logging on/off. val should be ONLY a boolean."""
 
         if val not in [False,True,0,1]:
             raise ValueError, \
                   'Call switch_log ONLY with a boolean argument, not with:',val
         
         label = {0:'OFF',1:'ON',False:'OFF',True:'ON'}
 
         if self.logfile is None:
             print """
 Logging hasn't been started yet (use logstart for that).
 
 %logon/%logoff are for temporarily starting and stopping logging for a logfile
 which already exists. But you must first start the logging process with
 %logstart (optionally giving a logfile name)."""
             
         else:
             if self.log_active == val:
                 print 'Logging is already',label[val]
             else:
                 print 'Switching logging',label[val]
                 self.log_active = not self.log_active
                 self.log_active_out = self.log_active
 
     def logstate(self):
         """Print a status message about the logger."""
         if self.logfile is None:
             print 'Logging has not been activated.'
         else:
             state = self.log_active and 'active' or 'temporarily suspended'
-            print 'Filename      :',self.logfname
-            print 'Mode          :',self.logmode
-            print 'Output logging:',self.log_output
-            print 'Timestamping  :',self.timestamp
-            print 'State         :',state
+            print 'Filename       :',self.logfname
+            print 'Mode           :',self.logmode
+            print 'Output logging :',self.log_output
+            print 'Timestamping   :',self.timestamp
+            print 'State          :',state
 
     def log(self, line,continuation=None):
         """Write the line to a log and create input cache variables _i*."""
 
         # update the auto _i tables
         #print '***logging line',line # dbg
         #print '***cache_count', self.shell.outputcache.prompt_count # dbg
         input_hist = self.shell.user_ns['_ih']
         if not continuation and line:
             self._iii = self._ii
             self._ii = self._i
             self._i = self._i00
             # put back the final \n of every input line
             self._i00 = line+'\n'
             #print 'Logging input:<%s>' % line  # dbg
             input_hist.append(self._i00)
 
         # hackish access to top-level namespace to create _i1,_i2... dynamically
         to_main = {'_i':self._i,'_ii':self._ii,'_iii':self._iii}
         if self.shell.outputcache.do_full_cache:
             in_num = self.shell.outputcache.prompt_count
             # add blank lines if the input cache fell out of sync. This can
             # happen for embedded instances which get killed via C-D and then
             # get resumed.
             while in_num >= len(input_hist):
                 input_hist.append('\n')
             new_i = '_i%s' % in_num
             if continuation:
                 self._i00 = '%s%s\n' % (self.shell.user_ns[new_i],line)
                 input_hist[in_num] = self._i00
             to_main[new_i] = self._i00
         self.shell.user_ns.update(to_main)
         self.log_write(line)
 
     def log_write(self,data,kind='input'):
         """Write data to the log file, if active"""
 
         if self.log_active and data:
             write = self.logfile.write
             if kind=='input':
                 if self.timestamp:
                     write(time.strftime('# %a, %d %b %Y %H:%M:%S\n',
                                         time.localtime()))
                 write('%s\n' % data)
             elif kind=='output' and self.log_output:
                 odata = '\n'.join(['#[Out]# %s' % s
                                    for s in data.split('\n')])
                 write('%s\n' % odata)
             self.logfile.flush()
 
     def close_log(self):
         self.logfile.close()
         self.logfile = None
         self.logfname = ''

IPython/Magic.py

@@ -1,2671 +1,2676 b''
 # -*- coding: utf-8 -*-
 """Magic functions for InteractiveShell.
 
-$Id: Magic.py 973 2005-12-29 18:51:56Z fperez $"""
+$Id: Magic.py 974 2005-12-29 19:48:33Z fperez $"""
 
 #*****************************************************************************
 #       Copyright (C) 2001 Janko Hauser <[e-mail]> and
 #       Copyright (C) 2001-2004 Fernando Perez <[e-mail]>
 #
 #  Distributed under the terms of the BSD License.  The full license is in
 #  the file COPYING, distributed as part of this software.
 #*****************************************************************************
 
 #****************************************************************************
 # Modules and globals
 
 from IPython import Release
 __author__  = '%s <%s>\n%s <%s>' % \
               ( Release.authors['Janko'] + Release.authors['Fernando'] )
 __license__ = Release.license
 
 # Python standard modules
 import __builtin__
 import bdb
 import inspect
 import os
 import pdb
 import pydoc
 import sys
 import re
 import tempfile
 import time
 import cPickle as pickle
 from cStringIO import StringIO
 from getopt import getopt
 from pprint import pprint, pformat
 
 # profile isn't bundled by default in Debian for license reasons
 try:
     import profile,pstats
 except ImportError:
     profile = pstats = None
 
 # Homebrewed
 from IPython import Debugger, OInspect, wildcard
 from IPython.FakeModule import FakeModule
 from IPython.Itpl import Itpl, itpl, printpl,itplns
 from IPython.PyColorize import Parser
 from IPython.Struct import Struct
 from IPython.genutils import *
 
 #***************************************************************************
 # Utility functions
 def on_off(tag):
     """Return an ON/OFF string for a 1/0 input. Simple utility function."""
     return ['OFF','ON'][tag]
 
 
 #****************************************************************************
 # Utility classes
 class Macro(list):
     """Simple class to store the value of macros as strings.
 
     This allows us to later exec them by checking when something is an
     instance of this class."""
 
     def __init__(self,data):
         list.__init__(self,data)
         self.value = ''.join(data)
 
 #***************************************************************************
 # Main class implementing Magic functionality
 class Magic:
     """Magic functions for InteractiveShell.
 
     Shell functions which can be reached as %function_name. All magic
     functions should accept a string, which they can parse for their own
     needs. This can make some functions easier to type, eg `%cd ../`
     vs. `%cd("../")`
 
     ALL definitions MUST begin with the prefix magic_. The user won't need it
     at the command line, but it is is needed in the definition. """
 
     # class globals
     auto_status = ['Automagic is OFF, % prefix IS needed for magic functions.',
                    'Automagic is ON, % prefix NOT needed for magic functions.']
 
     #......................................................................
     # some utility functions
 
     def __init__(self,shell):
         
         self.options_table = {}
         if profile is None:
             self.magic_prun = self.profile_missing_notice
         self.shell = shell
 
     def profile_missing_notice(self, *args, **kwargs):
         error("""\
 The profile module could not be found.  If you are a Debian user,
 it has been removed from the standard Debian package because of its non-free
 license. To use profiling, please install"python2.3-profiler" from non-free.""")
 
     def default_option(self,fn,optstr):
         """Make an entry in the options_table for fn, with value optstr"""
         
         if fn not in self.lsmagic():
             error("%s is not a magic function" % fn)
         self.options_table[fn] = optstr
 
     def lsmagic(self):
         """Return a list of currently available magic functions.
 
         Gives a list of the bare names after mangling (['ls','cd', ...], not
         ['magic_ls','magic_cd',...]"""
 
         # FIXME. This needs a cleanup, in the way the magics list is built.
         
         # magics in class definition
         class_magic = lambda fn: fn.startswith('magic_') and \
                       callable(Magic.__dict__[fn])
         # in instance namespace (run-time user additions)
         inst_magic =  lambda fn: fn.startswith('magic_') and \
                      callable(self.__dict__[fn])
         # and bound magics by user (so they can access self):
         inst_bound_magic =  lambda fn: fn.startswith('magic_') and \
                            callable(self.__class__.__dict__[fn])
         magics = filter(class_magic,Magic.__dict__.keys()) + \
                  filter(inst_magic,self.__dict__.keys()) + \
                  filter(inst_bound_magic,self.__class__.__dict__.keys())
         out = []
         for fn in magics:
             out.append(fn.replace('magic_','',1))
         out.sort()
         return out
     
     def extract_input_slices(self,slices):
         """Return as a string a set of input history slices.
 
         The set of slices is given as a list of strings (like ['1','4:8','9'],
         since this function is for use by magic functions which get their
         arguments as strings."""
 
         cmds = []
         for chunk in slices:
             if ':' in chunk:
                 ini,fin = map(int,chunk.split(':'))
             else:
                 ini = int(chunk)
                 fin = ini+1
             cmds.append(self.shell.input_hist[ini:fin])
         return cmds
         
     def _ofind(self,oname):
         """Find an object in the available namespaces.
 
         self._ofind(oname) -> dict with keys: found,obj,ospace,ismagic
 
         Has special code to detect magic functions.
         """
         
         oname = oname.strip()
 
         # Namespaces to search in:
         user_ns        = self.shell.user_ns
         internal_ns    = self.shell.internal_ns
         builtin_ns     = __builtin__.__dict__
         alias_ns       = self.shell.alias_table
 
         # Put them in a list. The order is important so that we find things in
         # the same order that Python finds them.
         namespaces = [ ('Interactive',user_ns),
                        ('IPython internal',internal_ns),
                        ('Python builtin',builtin_ns),
                        ('Alias',alias_ns),
                        ]
 
         # initialize results to 'null'
         found = 0; obj = None;  ospace = None;  ds = None;
         ismagic = 0; isalias = 0
 
         # Look for the given name by splitting it in parts.  If the head is
         # found, then we look for all the remaining parts as members, and only
         # declare success if we can find them all.
         oname_parts = oname.split('.')
         oname_head, oname_rest = oname_parts[0],oname_parts[1:]
         for nsname,ns in namespaces:
             try:
                 obj = ns[oname_head]
             except KeyError:
                 continue
             else:
                 for part in oname_rest:
                     try:
                         obj = getattr(obj,part)
                     except:
                         # Blanket except b/c some badly implemented objects
                         # allow __getattr__ to raise exceptions other than
                         # AttributeError, which then crashes IPython.
                         break
                 else:
                     # If we finish the for loop (no break), we got all members
                     found = 1
                     ospace = nsname
                     if ns == alias_ns:
                         isalias = 1
                     break  # namespace loop
 
         # Try to see if it's magic
         if not found:
             if oname.startswith(self.shell.ESC_MAGIC):
                 oname = oname[1:]
             obj = getattr(self,'magic_'+oname,None)
             if obj is not None:
                 found = 1
                 ospace = 'IPython internal'
                 ismagic = 1
 
         # Last try: special-case some literals like '', [], {}, etc:
         if not found and oname_head in ["''",'""','[]','{}','()']:
             obj = eval(oname_head)
             found = 1
             ospace = 'Interactive'
             
         return {'found':found, 'obj':obj, 'namespace':ospace,
                 'ismagic':ismagic, 'isalias':isalias}
         
     def arg_err(self,func):
         """Print docstring if incorrect arguments were passed"""
         print 'Error in arguments:'
         print OInspect.getdoc(func)
 
 
     def format_latex(self,strng):
         """Format a string for latex inclusion."""
 
         # Characters that need to be escaped for latex:
         escape_re = re.compile(r'(%|_|\$|#)',re.MULTILINE)
         # Magic command names as headers:
         cmd_name_re = re.compile(r'^(%s.*?):' % self.shell.ESC_MAGIC,
                                  re.MULTILINE)
         # Magic commands 
         cmd_re = re.compile(r'(?P<cmd>%s.+?\b)(?!\}\}:)' % self.shell.ESC_MAGIC,
                             re.MULTILINE)
         # Paragraph continue
         par_re = re.compile(r'\\$',re.MULTILINE)
 
         # The "\n" symbol
         newline_re = re.compile(r'\\n')
 
         # Now build the string for output:
         strng = cmd_name_re.sub(r'\n\\texttt{\\textsl{\\large \1}}:',strng)
         strng = cmd_re.sub(r'\\texttt{\g<cmd>}',strng)
         strng = par_re.sub(r'\\\\',strng)
         strng = escape_re.sub(r'\\\1',strng)
         strng = newline_re.sub(r'\\textbackslash{}n',strng)
         return strng
 
     def format_screen(self,strng):
         """Format a string for screen printing.
 
         This removes some latex-type format codes."""
         # Paragraph continue
         par_re = re.compile(r'\\$',re.MULTILINE)
         strng = par_re.sub('',strng)
         return strng
 
     def parse_options(self,arg_str,opt_str,*long_opts,**kw):
         """Parse options passed to an argument string.
 
         The interface is similar to that of getopt(), but it returns back a
         Struct with the options as keys and the stripped argument string still
         as a string.
 
         arg_str is quoted as a true sys.argv vector by using shlex.split.
         This allows us to easily expand variables, glob files, quote
         arguments, etc.
 
         Options:
           -mode: default 'string'. If given as 'list', the argument string is
           returned as a list (split on whitespace) instead of a string.
 
           -list_all: put all option values in lists. Normally only options
           appearing more than once are put in a list."""
 
         # inject default options at the beginning of the input line
         caller = sys._getframe(1).f_code.co_name.replace('magic_','')
         arg_str = '%s %s' % (self.options_table.get(caller,''),arg_str)
         
         mode = kw.get('mode','string')
         if mode not in ['string','list']:
             raise ValueError,'incorrect mode given: %s' % mode
         # Get options
         list_all = kw.get('list_all',0)
 
         # Check if we have more than one argument to warrant extra processing:
         odict = {}  # Dictionary with options
         args = arg_str.split()
         if len(args) >= 1:
             # If the list of inputs only has 0 or 1 thing in it, there's no
             # need to look for options
             argv = shlex_split(arg_str)
             # Do regular option processing
             opts,args = getopt(argv,opt_str,*long_opts)
             for o,a in opts:
                 if o.startswith('--'):
                     o = o[2:]
                 else:
                     o = o[1:]
                 try:
                     odict[o].append(a)
                 except AttributeError:
                     odict[o] = [odict[o],a]
                 except KeyError:
                     if list_all:
                         odict[o] = [a]
                     else:
                         odict[o] = a
 
         # Prepare opts,args for return
         opts = Struct(odict)
         if mode == 'string':
             args = ' '.join(args)
 
         return opts,args
     
     #......................................................................
     # And now the actual magic functions
 
     # Functions for IPython shell work (vars,funcs, config, etc)
     def magic_lsmagic(self, parameter_s = ''):
         """List currently available magic functions."""
         mesc = self.shell.ESC_MAGIC
         print 'Available magic functions:\n'+mesc+\
               ('  '+mesc).join(self.lsmagic())
         print '\n' + Magic.auto_status[self.shell.rc.automagic]
         return None
         
     def magic_magic(self, parameter_s = ''):
         """Print information about the magic function system."""
 
         mode = ''
         try:
             if parameter_s.split()[0] == '-latex':
                 mode = 'latex'
         except:
             pass
 
         magic_docs = []
         for fname in self.lsmagic():
             mname = 'magic_' + fname
             for space in (Magic,self,self.__class__):
                 try:
                     fn = space.__dict__[mname]
                 except KeyError:
                     pass
                 else:
                     break
             magic_docs.append('%s%s:\n\t%s\n' %(self.shell.ESC_MAGIC,
                                                 fname,fn.__doc__))
         magic_docs = ''.join(magic_docs)
 
         if mode == 'latex':
             print self.format_latex(magic_docs)
             return
         else:
             magic_docs = self.format_screen(magic_docs)
         
         outmsg = """
 IPython's 'magic' functions
 ===========================
 
 The magic function system provides a series of functions which allow you to
 control the behavior of IPython itself, plus a lot of system-type
 features. All these functions are prefixed with a % character, but parameters
 are given without parentheses or quotes.
 
 NOTE: If you have 'automagic' enabled (via the command line option or with the
 %automagic function), you don't need to type in the % explicitly.  By default,
 IPython ships with automagic on, so you should only rarely need the % escape.
 
 Example: typing '%cd mydir' (without the quotes) changes you working directory
 to 'mydir', if it exists.
 
 You can define your own magic functions to extend the system. See the supplied
 ipythonrc and example-magic.py files for details (in your ipython
 configuration directory, typically $HOME/.ipython/).
 
 You can also define your own aliased names for magic functions. In your
 ipythonrc file, placing a line like:
 
   execute __IPYTHON__.magic_pf = __IPYTHON__.magic_profile
 
 will define %pf as a new name for %profile.
 
 You can also call magics in code using the ipmagic() function, which IPython
 automatically adds to the builtin namespace.  Type 'ipmagic?' for details.
 
 For a list of the available magic functions, use %lsmagic. For a description
 of any of them, type %magic_name?, e.g. '%cd?'.
 
 Currently the magic system has the following functions:\n"""
 
         mesc = self.shell.ESC_MAGIC
         outmsg = ("%s\n%s\n\nSummary of magic functions (from %slsmagic):"
                   "\n\n%s%s\n\n%s" % (outmsg,
                                      magic_docs,mesc,mesc,
                                      ('  '+mesc).join(self.lsmagic()),
                                      Magic.auto_status[self.shell.rc.automagic] ) )
 
         page(outmsg,screen_lines=self.shell.rc.screen_length)
   
     def magic_automagic(self, parameter_s = ''):
         """Make magic functions callable without having to type the initial %.
         
         Toggles on/off (when off, you must call it as %automagic, of
         course). Note that magic functions have lowest priority, so if there's
         a variable whose name collides with that of a magic fn, automagic
         won't work for that function (you get the variable instead). However,
         if you delete the variable (del var), the previously shadowed magic
         function becomes visible to automagic again."""
 
         rc = self.shell.rc
         rc.automagic = not rc.automagic
         print '\n' + Magic.auto_status[rc.automagic]
 
     def magic_autocall(self, parameter_s = ''):
         """Make functions callable without having to type parentheses.
 
         This toggles the autocall command line option on and off."""
         
         rc = self.shell.rc
         rc.autocall = not rc.autocall
         print "Automatic calling is:",['OFF','ON'][rc.autocall]
 
     def magic_autoindent(self, parameter_s = ''):
         """Toggle autoindent on/off (if available)."""
 
         self.shell.set_autoindent()
         print "Automatic indentation is:",['OFF','ON'][self.shell.autoindent]
 
     def magic_system_verbose(self, parameter_s = ''):
         """Toggle verbose printing of system calls on/off."""
 
         self.shell.rc_set_toggle('system_verbose')
         print "System verbose printing is:",\
               ['OFF','ON'][self.shell.rc.system_verbose]
 
     def magic_history(self, parameter_s = ''):
         """Print input history (_i<n> variables), with most recent last.
         
         %history [-n]       -> print at most 40 inputs (some may be multi-line)\\
         %history [-n] n     -> print at most n inputs\\
         %history [-n] n1 n2 -> print inputs between n1 and n2 (n2 not included)\\
 
         Each input's number <n> is shown, and is accessible as the
         automatically generated variable _i<n>.  Multi-line statements are
         printed starting at a new line for easy copy/paste.
 
         If option -n is used, input numbers are not printed. This is useful if
         you want to get a printout of many lines which can be directly pasted
         into a text editor.
 
         This feature is only available if numbered prompts are in use."""
 
         if not self.shell.outputcache.do_full_cache:
             print 'This feature is only available if numbered prompts are in use.'
             return
         opts,args = self.parse_options(parameter_s,'n',mode='list')
         
         default_length = 40
         if len(args) == 0:
             final = self.shell.outputcache.prompt_count
             init = max(1,final-default_length)
         elif len(args) == 1:
             final = self.shell.outputcache.prompt_count
             init = max(1,final-int(args[0]))
         elif len(args) == 2:
             init,final = map(int,args)
         else:
             warn('%hist takes 0, 1 or 2 arguments separated by spaces.')
             print self.magic_hist.__doc__
             return
         width = len(str(final))
         line_sep = ['','\n']
         input_hist = self.shell.input_hist
         print_nums = not opts.has_key('n')
         for in_num in range(init,final):
             inline = input_hist[in_num]
             multiline = inline.count('\n') > 1
             if print_nums:
                 print str(in_num).ljust(width)+':'+ line_sep[multiline],
             if inline.startswith('#'+self.shell.ESC_MAGIC) or \
                    inline.startswith('#!'):
                 print inline[1:],
             else:
                 print inline,
 
     def magic_hist(self, parameter_s=''):
         """Alternate name for %history."""
         return self.magic_history(parameter_s)
 
     def magic_p(self, parameter_s=''):
         """Just a short alias for Python's 'print'."""
         exec 'print ' + parameter_s in self.shell.user_ns
 
     def magic_r(self, parameter_s=''):
         """Repeat previous input.
 
         If given an argument, repeats the previous command which starts with
         the same string, otherwise it just repeats the previous input.
 
         Shell escaped commands (with ! as first character) are not recognized
         by this system, only pure python code and magic commands.
         """
 
         start = parameter_s.strip()
         esc_magic = self.shell.ESC_MAGIC
         # Identify magic commands even if automagic is on (which means
         # the in-memory version is different from that typed by the user).
         if self.shell.rc.automagic:
             start_magic = esc_magic+start
         else:
             start_magic = start
         # Look through the input history in reverse
         for n in range(len(self.shell.input_hist)-2,0,-1):
             input = self.shell.input_hist[n]
             # skip plain 'r' lines so we don't recurse to infinity
             if input != 'ipmagic("r")\n' and \
                    (input.startswith(start) or input.startswith(start_magic)):
                 #print 'match',`input`  # dbg
                 print 'Executing:',input,
                 self.shell.runlines(input)
                 return
         print 'No previous input matching `%s` found.' % start
 
     def magic_page(self, parameter_s=''):
         """Pretty print the object and display it through a pager.
         
         If no parameter is given, use _ (last output)."""
         # After a function contributed by Olivier Aubert, slightly modified.
 
         oname = parameter_s and parameter_s or '_' 
         info = self._ofind(oname)
         if info['found']:
             page(pformat(info['obj']))
         else:
             print 'Object `%s` not found' % oname
 
     def magic_profile(self, parameter_s=''):
         """Print your currently active IPyhton profile."""
         if self.shell.rc.profile:
             printpl('Current IPython profile: $self.shell.rc.profile.')
         else:
             print 'No profile active.'
         
     def _inspect(self,meth,oname,**kw):
         """Generic interface to the inspector system.
 
         This function is meant to be called by pdef, pdoc & friends."""
         
         oname = oname.strip()
         info = Struct(self._ofind(oname))
         if info.found:
             pmethod = getattr(self.shell.inspector,meth)
             formatter = info.ismagic and self.format_screen or None
             if meth == 'pdoc':
                 pmethod(info.obj,oname,formatter)
             elif meth == 'pinfo':
                 pmethod(info.obj,oname,formatter,info,**kw)
             else:
                 pmethod(info.obj,oname)
         else:
             print 'Object `%s` not found.' % oname
             return 'not found'  # so callers can take other action
         
     def magic_pdef(self, parameter_s=''):
         """Print the definition header for any callable object.
 
         If the object is a class, print the constructor information."""
         self._inspect('pdef',parameter_s)
         
     def magic_pdoc(self, parameter_s=''):
         """Print the docstring for an object.
 
         If the given object is a class, it will print both the class and the
         constructor docstrings."""
         self._inspect('pdoc',parameter_s)
 
     def magic_psource(self, parameter_s=''):
         """Print (or run through pager) the source code for an object."""
         self._inspect('psource',parameter_s)
 
     def magic_pfile(self, parameter_s=''):
         """Print (or run through pager) the file where an object is defined.
 
         The file opens at the line where the object definition begins. IPython
         will honor the environment variable PAGER if set, and otherwise will
         do its best to print the file in a convenient form.
 
         If the given argument is not an object currently defined, IPython will
         try to interpret it as a filename (automatically adding a .py extension
         if needed). You can thus use %pfile as a syntax highlighting code
         viewer."""
 
         # first interpret argument as an object name
         out = self._inspect('pfile',parameter_s)
         # if not, try the input as a filename
         if out == 'not found':
             try:
                 filename = get_py_filename(parameter_s)
             except IOError,msg:
                 print msg
                 return
             page(self.shell.inspector.format(file(filename).read()))
             
     def magic_pinfo(self, parameter_s=''):
         """Provide detailed information about an object.
 
         '%pinfo object' is just a synonym for object? or ?object."""
 
         #print 'pinfo par: <%s>' % parameter_s  # dbg
 
         # detail_level: 0 -> obj? , 1 -> obj??
         detail_level = 0
         # We need to detect if we got called as 'pinfo pinfo foo', which can
         # happen if the user types 'pinfo foo?' at the cmd line.
         pinfo,qmark1,oname,qmark2 = \
                re.match('(pinfo )?(\?*)(.*?)(\??$)',parameter_s).groups()
         if pinfo or qmark1 or qmark2:
             detail_level = 1
         if "*" in oname:
             self.magic_psearch(oname)
         else:
             self._inspect('pinfo',oname,detail_level=detail_level)
 
     def magic_psearch(self, parameter_s=''):
         """Search for object in namespaces by wildcard.
 
         %psearch [options] PATTERN [OBJECT TYPE]
 
         Note: ? can be used as a synonym for %psearch, at the beginning or at
         the end: both a*? and ?a* are equivalent to '%psearch a*'.  Still, the
         rest of the command line must be unchanged (options come first), so
         for example the following forms are equivalent
 
         %psearch -i a* function
         -i a* function?
         ?-i a* function
 
         Arguments:
         
           PATTERN
 
           where PATTERN is a string containing * as a wildcard similar to its
           use in a shell.  The pattern is matched in all namespaces on the
           search path. By default objects starting with a single _ are not
           matched, many IPython generated objects have a single
           underscore. The default is case insensitive matching. Matching is
           also done on the attributes of objects and not only on the objects
           in a module.
 
           [OBJECT TYPE]
 
           Is the name of a python type from the types module. The name is
           given in lowercase without the ending type, ex. StringType is
           written string. By adding a type here only objects matching the
           given type are matched. Using all here makes the pattern match all
           types (this is the default).
 
         Options:
 
           -a: makes the pattern match even objects whose names start with a
           single underscore.  These names are normally ommitted from the
           search.
 
           -i/-c: make the pattern case insensitive/sensitive.  If neither of
           these options is given, the default is read from your ipythonrc
           file.  The option name which sets this value is
           'wildcards_case_sensitive'.  If this option is not specified in your
           ipythonrc file, IPython's internal default is to do a case sensitive
           search.
 
           -e/-s NAMESPACE: exclude/search a given namespace.  The pattern you
           specifiy can be searched in any of the following namespaces:
           'builtin', 'user', 'user_global','internal', 'alias', where
           'builtin' and 'user' are the search defaults.  Note that you should
           not use quotes when specifying namespaces.
 
           'Builtin' contains the python module builtin, 'user' contains all
           user data, 'alias' only contain the shell aliases and no python
           objects, 'internal' contains objects used by IPython.  The
           'user_global' namespace is only used by embedded IPython instances,
           and it contains module-level globals.  You can add namespaces to the
           search with -s or exclude them with -e (these options can be given
           more than once).
     
         Examples:
        
         %psearch a*            -> objects beginning with an a
         %psearch -e builtin a* -> objects NOT in the builtin space starting in a
         %psearch a* function   -> all functions beginning with an a
         %psearch re.e*         -> objects beginning with an e in module re
         %psearch r*.e*         -> objects that start with e in modules starting in r
         %psearch r*.* string   -> all strings in modules beginning with r
 
         Case sensitve search:
        
         %psearch -c a*         list all object beginning with lower case a
 
         Show objects beginning with a single _:
        
         %psearch -a _*         list objects beginning with a single underscore"""
 
         # default namespaces to be searched
         def_search = ['user','builtin']
 
         # Process options/args
         opts,args = self.parse_options(parameter_s,'cias:e:',list_all=True)
         opt = opts.get
         shell = self.shell
         psearch = shell.inspector.psearch
         
         # select case options
         if opts.has_key('i'):
             ignore_case = True
         elif opts.has_key('c'):
             ignore_case = False
         else:
             ignore_case = not shell.rc.wildcards_case_sensitive
 
         # Build list of namespaces to search from user options
         def_search.extend(opt('s',[]))
         ns_exclude = ns_exclude=opt('e',[])
         ns_search = [nm for nm in def_search if nm not in ns_exclude]
         
         # Call the actual search
         try:
             psearch(args,shell.ns_table,ns_search,
                     show_all=opt('a'),ignore_case=ignore_case)
         except:
             shell.showtraceback()
 
     def magic_who_ls(self, parameter_s=''):
         """Return a sorted list of all interactive variables.
 
         If arguments are given, only variables of types matching these
         arguments are returned."""
 
         user_ns = self.shell.user_ns
         out = []
         typelist = parameter_s.split()
         for i in self.shell.user_ns.keys():
             if not (i.startswith('_') or i.startswith('_i')) \
                    and not (self.shell.internal_ns.has_key(i) or
                             self.shell.user_config_ns.has_key(i)):
                 if typelist:
                     if type(user_ns[i]).__name__ in typelist:
                         out.append(i)
                 else:
                     out.append(i)
         out.sort()
         return out
         
     def magic_who(self, parameter_s=''):
         """Print all interactive variables, with some minimal formatting.
 
         If any arguments are given, only variables whose type matches one of
         these are printed.  For example:
 
           %who function str
 
         will only list functions and strings, excluding all other types of
         variables.  To find the proper type names, simply use type(var) at a
         command line to see how python prints type names.  For example:
 
           In [1]: type('hello')\\
           Out[1]: <type 'str'>
 
         indicates that the type name for strings is 'str'.
 
         %who always excludes executed names loaded through your configuration
         file and things which are internal to IPython.
 
         This is deliberate, as typically you may load many modules and the
         purpose of %who is to show you only what you've manually defined."""
 
         varlist = self.magic_who_ls(parameter_s)
         if not varlist:
             print 'Interactive namespace is empty.'
             return
 
         # if we have variables, move on...
 
         # stupid flushing problem: when prompts have no separators, stdout is
         # getting lost. I'm starting to think this is a python bug. I'm having
         # to force a flush with a print because even a sys.stdout.flush
         # doesn't seem to do anything!
 
         count = 0
         for i in varlist:
             print i+'\t',
             count += 1
             if count > 8:
                 count = 0
                 print
             sys.stdout.flush()  # FIXME. Why the hell isn't this flushing???
             
         print # well, this does force a flush at the expense of an extra \n
 
     def magic_whos(self, parameter_s=''):
         """Like %who, but gives some extra information about each variable.
 
         The same type filtering of %who can be applied here.
 
         For all variables, the type is printed. Additionally it prints:
         
           - For {},[],(): their length.
 
           - For Numeric arrays, a summary with shape, number of elements,
           typecode and size in memory.
 
           - Everything else: a string representation, snipping their middle if
           too long."""
         
         varnames = self.magic_who_ls(parameter_s)
         if not varnames:
             print 'Interactive namespace is empty.'
             return
 
         # if we have variables, move on...
 
         # for these types, show len() instead of data:
         seq_types = [types.DictType,types.ListType,types.TupleType]
 
         # for Numeric arrays, display summary info
         try:
             import Numeric
         except ImportError:
             array_type = None
         else:
             array_type = Numeric.ArrayType.__name__
         
         # Find all variable names and types so we can figure out column sizes
         get_vars = lambda i: self.shell.user_ns[i]
         type_name = lambda v: type(v).__name__
         varlist = map(get_vars,varnames)
         typelist = map(type_name,varlist)
         # column labels and # of spaces as separator
         varlabel = 'Variable'
         typelabel = 'Type'
         datalabel = 'Data/Info'
         colsep = 3
         # variable format strings
         vformat    = "$vname.ljust(varwidth)$vtype.ljust(typewidth)"
         vfmt_short = '$vstr[:25]<...>$vstr[-25:]'
         aformat    = "%s: %s elems, type `%s`, %s bytes"
         # find the size of the columns to format the output nicely
         varwidth = max(max(map(len,varnames)), len(varlabel)) + colsep
         typewidth = max(max(map(len,typelist)), len(typelabel)) + colsep
         # table header
         print varlabel.ljust(varwidth) + typelabel.ljust(typewidth) + \
               ' '+datalabel+'\n' + '-'*(varwidth+typewidth+len(datalabel)+1)
         # and the table itself
         kb = 1024
         Mb = 1048576  # kb**2
         for vname,var,vtype in zip(varnames,varlist,typelist):
             print itpl(vformat),
             if vtype in seq_types:
                 print len(var)
             elif vtype==array_type:
                 vshape = str(var.shape).replace(',','').replace(' ','x')[1:-1]
                 vsize  = Numeric.size(var)
                 vbytes = vsize*var.itemsize()
                 if vbytes < 100000:
                     print aformat % (vshape,vsize,var.typecode(),vbytes)
                 else:
                     print aformat % (vshape,vsize,var.typecode(),vbytes),
                     if vbytes < Mb:
                         print '(%s kb)' % (vbytes/kb,)
                     else:
                         print '(%s Mb)' % (vbytes/Mb,)
             else:
                 vstr = str(var)
                 if len(vstr) < 50:
                     print vstr
                 else:
                     printpl(vfmt_short)
                 
     def magic_reset(self, parameter_s=''):
         """Resets the namespace by removing all names defined by the user.
 
         Input/Output history are left around in case you need them."""
 
         ans = raw_input(
           "Once deleted, variables cannot be recovered. Proceed (y/n)? ")
         if not ans.lower() == 'y':
             print 'Nothing done.'
             return
         user_ns = self.shell.user_ns
         for i in self.magic_who_ls():
             del(user_ns[i])
 
     def magic_config(self,parameter_s=''):
         """Show IPython's internal configuration."""
         
         page('Current configuration structure:\n'+
              pformat(self.shell.rc.dict()))
 
     def magic_logstart(self,parameter_s=''):
         """Start logging anywhere in a session.
 
         %logstart [-o|-t] [log_name [log_mode]]
 
         If no name is given, it defaults to a file named 'ipython_log.py' in your
         current directory, in 'rotate' mode (see below).
 
         '%logstart name' saves to file 'name' in 'backup' mode.  It saves your
         history up to that point and then continues logging.
 
         %logstart takes a second optional parameter: logging mode. This can be one
         of (note that the modes are given unquoted):\\
           append: well, that says it.\\
           backup: rename (if exists) to name~ and start name.\\
           global: single logfile in your home dir, appended to.\\
           over  : overwrite existing log.\\
           rotate: create rotating logs name.1~, name.2~, etc.
 
         Options:
 
           -o: log also IPython's output.  In this mode, all commands which
           generate an Out[NN] prompt are recorded to the logfile, right after
           their corresponding input line.  The output lines are always
-          prepended with a #[Out]# marker, so that the log remains valid
+          prepended with a '#[Out]# ' marker, so that the log remains valid
           Python code.
 
+          Since this marker is always the same, filtering only the output from
+          a log is very easy, using for example a simple awk call:
+
+            awk -F'#\\[Out\\]# ' '{if($2) {print $2}}' ipython_log.py
+
           -t: put timestamps before each input line logged (these are put in
           comments)."""
         
         opts,par = self.parse_options(parameter_s,'ot')
         log_output = 'o' in opts
         timestamp = 't' in opts
 
         rc = self.shell.rc
         logger = self.shell.logger
 
         # if no args are given, the defaults set in the logger constructor by
         # ipytohn remain valid
         if par:
             try:
                 logfname,logmode = par.split()
             except:
                 logfname = par
                 logmode = 'backup'
         else:
             logfname = logger.logfname
             logmode = logger.logmode
         # put logfname into rc struct as if it had been called on the command
         # line, so it ends up saved in the log header Save it in case we need
         # to restore it...
         old_logfile = rc.opts.get('logfile','')  
         if logfname:
             logfname = os.path.expanduser(logfname)
         rc.opts.logfile = logfname
         loghead = self.shell.loghead_tpl % (rc.opts,rc.args)
         try:
             started  = logger.logstart(logfname,loghead,logmode,
                                        log_output,timestamp)
         except:
             rc.opts.logfile = old_logfile
             warn("Couldn't start log: %s" % sys.exc_info()[1])
         else:
             # log input history up to this point, optionally interleaving
             # output if requested
 
             if timestamp:
                 # disable timestamping for the previous history, since we've
                 # lost those already (no time machine here).
                 logger.timestamp = False
             if log_output:
                 log_write = logger.log_write
                 input_hist = self.shell.input_hist
                 output_hist = self.shell.output_hist
                 for n in range(1,len(input_hist)-1):
                     log_write(input_hist[n].rstrip())
                     if n in output_hist:
                         log_write(repr(output_hist[n]),'output')
             else:
                 logger.log_write(self.shell.input_hist[1:])
             if timestamp:
                 # re-enable timestamping
                 logger.timestamp = True
                 
             print ('Activating auto-logging. '
                    'Current session state plus future input saved.')
             logger.logstate()
 
     def magic_logoff(self,parameter_s=''):
         """Temporarily stop logging.
 
         You must have previously started logging."""
         self.shell.logger.switch_log(0)
         
     def magic_logon(self,parameter_s=''):
         """Restart logging.
 
         This function is for restarting logging which you've temporarily
         stopped with %logoff. For starting logging for the first time, you
         must use the %logstart function, which allows you to specify an
         optional log filename."""
         
         self.shell.logger.switch_log(1)
     
     def magic_logstate(self,parameter_s=''):
         """Print the status of the logging system."""
 
         self.shell.logger.logstate()
         
     def magic_pdb(self, parameter_s=''):
         """Control the calling of the pdb interactive debugger.
 
         Call as '%pdb on', '%pdb 1', '%pdb off' or '%pdb 0'. If called without
         argument it works as a toggle.
 
         When an exception is triggered, IPython can optionally call the
         interactive pdb debugger after the traceback printout. %pdb toggles
         this feature on and off."""
 
         par = parameter_s.strip().lower()
 
         if par:
             try:
                 new_pdb = {'off':0,'0':0,'on':1,'1':1}[par]
             except KeyError:
                 print ('Incorrect argument. Use on/1, off/0, '
                        'or nothing for a toggle.')
                 return
         else:
             # toggle
             new_pdb = not self.shell.InteractiveTB.call_pdb
 
         # set on the shell
         self.shell.call_pdb = new_pdb
         print 'Automatic pdb calling has been turned',on_off(new_pdb)
 
     def magic_prun(self, parameter_s ='',user_mode=1,
                    opts=None,arg_lst=None,prog_ns=None):
 
         """Run a statement through the python code profiler.
 
         Usage:\\
           %prun [options] statement
 
         The given statement (which doesn't require quote marks) is run via the
         python profiler in a manner similar to the profile.run() function.
         Namespaces are internally managed to work correctly; profile.run
         cannot be used in IPython because it makes certain assumptions about
         namespaces which do not hold under IPython.
 
         Options:
 
         -l <limit>: you can place restrictions on what or how much of the
         profile gets printed. The limit value can be:
 
           * A string: only information for function names containing this string
           is printed.
 
           * An integer: only these many lines are printed.
 
           * A float (between 0 and 1): this fraction of the report is printed
           (for example, use a limit of 0.4 to see the topmost 40% only).
 
         You can combine several limits with repeated use of the option. For
         example, '-l __init__ -l 5' will print only the topmost 5 lines of
         information about class constructors.
 
         -r: return the pstats.Stats object generated by the profiling. This
         object has all the information about the profile in it, and you can
         later use it for further analysis or in other functions.
 
         Since magic functions have a particular form of calling which prevents
         you from writing something like:\\
           In [1]: p = %prun -r print 4  # invalid!\\
         you must instead use IPython's automatic variables to assign this:\\
           In [1]: %prun -r print 4  \\
           Out[1]: <pstats.Stats instance at 0x8222cec>\\
           In [2]: stats = _
 
         If you really need to assign this value via an explicit function call,
         you can always tap directly into the true name of the magic function
         by using the ipmagic function (which IPython automatically adds to the
         builtins):\\
           In [3]: stats = ipmagic('prun','-r print 4')
 
         You can type ipmagic? for more details on ipmagic.
 
        -s <key>: sort profile by given key. You can provide more than one key
         by using the option several times: '-s key1 -s key2 -s key3...'. The
         default sorting key is 'time'.
 
         The following is copied verbatim from the profile documentation
         referenced below:
 
         When more than one key is provided, additional keys are used as
         secondary criteria when the there is equality in all keys selected
         before them.
         
         Abbreviations can be used for any key names, as long as the
         abbreviation is unambiguous.  The following are the keys currently
         defined:
 
                 Valid Arg       Meaning\\
                   "calls"      call count\\
                   "cumulative" cumulative time\\
                   "file"       file name\\
                   "module"     file name\\
                   "pcalls"     primitive call count\\
                   "line"       line number\\
                   "name"       function name\\
                   "nfl"        name/file/line\\
                   "stdname"    standard name\\
                   "time"       internal time
 
         Note that all sorts on statistics are in descending order (placing
         most time consuming items first), where as name, file, and line number
         searches are in ascending order (i.e., alphabetical). The subtle
         distinction between "nfl" and "stdname" is that the standard name is a
         sort of the name as printed, which means that the embedded line
         numbers get compared in an odd way.  For example, lines 3, 20, and 40
         would (if the file names were the same) appear in the string order
         "20" "3" and "40".  In contrast, "nfl" does a numeric compare of the
         line numbers.  In fact, sort_stats("nfl") is the same as
         sort_stats("name", "file", "line").
 
         -T <filename>: save profile results as shown on screen to a text
         file. The profile is still shown on screen.
 
         -D <filename>: save (via dump_stats) profile statistics to given
         filename. This data is in a format understod by the pstats module, and
         is generated by a call to the dump_stats() method of profile
         objects. The profile is still shown on screen.
 
         If you want to run complete programs under the profiler's control, use
         '%run -p [prof_opts] filename.py [args to program]' where prof_opts
         contains profiler specific options as described here.
         
         You can read the complete documentation for the profile module with:\\
           In [1]: import profile; profile.help() """
 
         opts_def = Struct(D=[''],l=[],s=['time'],T=[''])
         # protect user quote marks
         parameter_s = parameter_s.replace('"',r'\"').replace("'",r"\'")
         
         if user_mode:  # regular user call
             opts,arg_str = self.parse_options(parameter_s,'D:l:rs:T:',
                                               list_all=1)
             namespace = self.shell.user_ns
         else:  # called to run a program by %run -p
             try:
                 filename = get_py_filename(arg_lst[0])
             except IOError,msg:
                 error(msg)
                 return
 
             arg_str = 'execfile(filename,prog_ns)'
             namespace = locals()
 
         opts.merge(opts_def)
         
         prof = profile.Profile()
         try:
             prof = prof.runctx(arg_str,namespace,namespace)
             sys_exit = ''
         except SystemExit:
             sys_exit = """*** SystemExit exception caught in code being profiled."""
 
         stats = pstats.Stats(prof).strip_dirs().sort_stats(*opts.s)
 
         lims = opts.l
         if lims:
             lims = []  # rebuild lims with ints/floats/strings
             for lim in opts.l:
                 try:
                     lims.append(int(lim))
                 except ValueError:
                     try:
                         lims.append(float(lim))
                     except ValueError:
                         lims.append(lim)
                     
         # trap output
         sys_stdout = sys.stdout
         stdout_trap = StringIO()
         try:
             sys.stdout = stdout_trap
             stats.print_stats(*lims)
         finally:
             sys.stdout = sys_stdout
         output = stdout_trap.getvalue()
         output = output.rstrip()
 
         page(output,screen_lines=self.shell.rc.screen_length)
         print sys_exit,
 
         dump_file = opts.D[0]
         text_file = opts.T[0]
         if dump_file:
             prof.dump_stats(dump_file)
             print '\n*** Profile stats marshalled to file',\
                   `dump_file`+'.',sys_exit
         if text_file:
             file(text_file,'w').write(output)
             print '\n*** Profile printout saved to text file',\
                   `text_file`+'.',sys_exit
 
         if opts.has_key('r'):
             return stats
         else:
             return None
 
     def magic_run(self, parameter_s ='',runner=None):
         """Run the named file inside IPython as a program.
 
         Usage:\\
           %run [-n -i -t [-N<N>] -d [-b<N>] -p [profile options]] file [args]
 
         Parameters after the filename are passed as command-line arguments to
         the program (put in sys.argv). Then, control returns to IPython's
         prompt.
 
         This is similar to running at a system prompt:\\
           $ python file args\\
         but with the advantage of giving you IPython's tracebacks, and of
         loading all variables into your interactive namespace for further use
         (unless -p is used, see below).
 
         The file is executed in a namespace initially consisting only of
         __name__=='__main__' and sys.argv constructed as indicated. It thus
         sees its environment as if it were being run as a stand-alone
         program. But after execution, the IPython interactive namespace gets
         updated with all variables defined in the program (except for __name__
         and sys.argv). This allows for very convenient loading of code for
         interactive work, while giving each program a 'clean sheet' to run in.
 
         Options:
         
         -n: __name__ is NOT set to '__main__', but to the running file's name
         without extension (as python does under import).  This allows running
         scripts and reloading the definitions in them without calling code
         protected by an ' if __name__ == "__main__" ' clause.
 
         -i: run the file in IPython's namespace instead of an empty one. This
         is useful if you are experimenting with code written in a text editor
         which depends on variables defined interactively.
 
         -e: ignore sys.exit() calls or SystemExit exceptions in the script
         being run.  This is particularly useful if IPython is being used to
         run unittests, which always exit with a sys.exit() call.  In such
         cases you are interested in the output of the test results, not in
         seeing a traceback of the unittest module.
 
         -t: print timing information at the end of the run.  IPython will give
         you an estimated CPU time consumption for your script, which under
         Unix uses the resource module to avoid the wraparound problems of
         time.clock().  Under Unix, an estimate of time spent on system tasks
         is also given (for Windows platforms this is reported as 0.0).
 
         If -t is given, an additional -N<N> option can be given, where <N>
         must be an integer indicating how many times you want the script to
         run.  The final timing report will include total and per run results.
 
         For example (testing the script uniq_stable.py):
 
             In [1]: run -t uniq_stable
 
             IPython CPU timings (estimated):\\
               User  :    0.19597 s.\\
               System:        0.0 s.\\
 
             In [2]: run -t -N5 uniq_stable
 
             IPython CPU timings (estimated):\\
             Total runs performed: 5\\
               Times :      Total       Per run\\
               User  :   0.910862 s,  0.1821724 s.\\
               System:        0.0 s,        0.0 s.
 
         -d: run your program under the control of pdb, the Python debugger.
         This allows you to execute your program step by step, watch variables,
         etc.  Internally, what IPython does is similar to calling:
         
           pdb.run('execfile("YOURFILENAME")')
 
         with a breakpoint set on line 1 of your file.  You can change the line
         number for this automatic breakpoint to be <N> by using the -bN option
         (where N must be an integer).  For example:
 
           %run -d -b40 myscript
 
         will set the first breakpoint at line 40 in myscript.py.  Note that
         the first breakpoint must be set on a line which actually does
         something (not a comment or docstring) for it to stop execution.
 
         When the pdb debugger starts, you will see a (Pdb) prompt.  You must
         first enter 'c' (without qoutes) to start execution up to the first
         breakpoint.
 
         Entering 'help' gives information about the use of the debugger.  You
         can easily see pdb's full documentation with "import pdb;pdb.help()"
         at a prompt.
 
         -p: run program under the control of the Python profiler module (which
         prints a detailed report of execution times, function calls, etc).
 
         You can pass other options after -p which affect the behavior of the
         profiler itself. See the docs for %prun for details.
 
         In this mode, the program's variables do NOT propagate back to the
         IPython interactive namespace (because they remain in the namespace
         where the profiler executes them).
 
         Internally this triggers a call to %prun, see its documentation for
         details on the options available specifically for profiling."""
 
         # get arguments and set sys.argv for program to be run.
         opts,arg_lst = self.parse_options(parameter_s,'nidtN:b:pD:l:rs:T:e',
                                           mode='list',list_all=1)
 
         try:
             filename = get_py_filename(arg_lst[0])
         except IndexError:
             warn('you must provide at least a filename.')
             print '\n%run:\n',OInspect.getdoc(self.magic_run)
             return
         except IOError,msg:
             error(msg)
             return
 
         # Control the response to exit() calls made by the script being run
         exit_ignore = opts.has_key('e')
         
         # Make sure that the running script gets a proper sys.argv as if it
         # were run from a system shell.
         save_argv = sys.argv # save it for later restoring
         sys.argv = [filename]+ arg_lst[1:]  # put in the proper filename
 
         if opts.has_key('i'):
             prog_ns = self.shell.user_ns
             __name__save = self.shell.user_ns['__name__']
             prog_ns['__name__'] = '__main__'
         else:
             if opts.has_key('n'):
                 name = os.path.splitext(os.path.basename(filename))[0]
             else:
                 name = '__main__'
             prog_ns = {'__name__':name}
 
         # pickle fix.  See iplib for an explanation
         sys.modules[prog_ns['__name__']] = FakeModule(prog_ns)
         
         stats = None
         try:
             if opts.has_key('p'):
                 stats = self.magic_prun('',0,opts,arg_lst,prog_ns)
             else:
                 if opts.has_key('d'):
                     deb = Debugger.Pdb(self.shell.rc.colors)
                     # reset Breakpoint state, which is moronically kept
                     # in a class
                     bdb.Breakpoint.next = 1
                     bdb.Breakpoint.bplist = {}
                     bdb.Breakpoint.bpbynumber = [None]
                     # Set an initial breakpoint to stop execution
                     maxtries = 10
                     bp = int(opts.get('b',[1])[0])
                     checkline = deb.checkline(filename,bp)
                     if not checkline:
                         for bp in range(bp+1,bp+maxtries+1):
                             if deb.checkline(filename,bp):
                                 break
                         else:
                             msg = ("\nI failed to find a valid line to set "
                                    "a breakpoint\n"
                                    "after trying up to line: %s.\n"
                                    "Please set a valid breakpoint manually "
                                    "with the -b option." % bp)
                             error(msg)
                             return
                     # if we find a good linenumber, set the breakpoint
                     deb.do_break('%s:%s' % (filename,bp))
                     # Start file run
                     print "NOTE: Enter 'c' at the",
                     print "ipdb> prompt to start your script."
                     try:
                         deb.run('execfile("%s")' % filename,prog_ns)
                     except:
                         etype, value, tb = sys.exc_info()
                         # Skip three frames in the traceback: the %run one,
                         # one inside bdb.py, and the command-line typed by the
                         # user (run by exec in pdb itself).
                         self.shell.InteractiveTB(etype,value,tb,tb_offset=3)
                 else:
                     if runner is None:
                         runner = self.shell.safe_execfile
                     if opts.has_key('t'):
                         try:
                             nruns = int(opts['N'][0])
                             if nruns < 1:
                                 error('Number of runs must be >=1')
                                 return
                         except (KeyError):
                             nruns = 1
                         if nruns == 1:
                             t0 = clock2()
                             runner(filename,prog_ns,prog_ns,exit_ignore=exit_ignore)
                             t1 = clock2()
                             t_usr = t1[0]-t0[0]
                             t_sys = t1[1]-t1[1]
                             print "\nIPython CPU timings (estimated):"
                             print "  User  : %10s s." % t_usr
                             print "  System: %10s s." % t_sys
                         else:
                             runs = range(nruns)
                             t0 = clock2()
                             for nr in runs:
                                 runner(filename,prog_ns,prog_ns,exit_ignore=exit_ignore)
                             t1 = clock2()
                             t_usr = t1[0]-t0[0]
                             t_sys = t1[1]-t1[1]
                             print "\nIPython CPU timings (estimated):"
                             print "Total runs performed:",nruns
                             print "  Times : %10s    %10s" % ('Total','Per run')
                             print "  User  : %10s s, %10s s." % (t_usr,t_usr/nruns)
                             print "  System: %10s s, %10s s." % (t_sys,t_sys/nruns)
                             
                     else:
                         runner(filename,prog_ns,prog_ns,exit_ignore=exit_ignore)
                 if opts.has_key('i'):
                     self.shell.user_ns['__name__'] = __name__save
                 else:
                     # update IPython interactive namespace
                     del prog_ns['__name__']
                     self.shell.user_ns.update(prog_ns)
         finally:
             sys.argv = save_argv
         return stats
 
     def magic_runlog(self, parameter_s =''):
         """Run files as logs.
 
         Usage:\\
           %runlog file1 file2 ...
 
         Run the named files (treating them as log files) in sequence inside
         the interpreter, and return to the prompt.  This is much slower than
         %run because each line is executed in a try/except block, but it
         allows running files with syntax errors in them.
 
         Normally IPython will guess when a file is one of its own logfiles, so
         you can typically use %run even for logs. This shorthand allows you to
         force any file to be treated as a log file."""
 
         for f in parameter_s.split():
             self.shell.safe_execfile(f,self.shell.user_ns,
                                      self.shell.user_ns,islog=1)
 
     def magic_time(self,parameter_s = ''):
         """Time execution of a Python statement or expression.
 
         The CPU and wall clock times are printed, and the value of the
         expression (if any) is returned.  Note that under Win32, system time
         is always reported as 0, since it can not be measured.
 
         This function provides very basic timing functionality.  In Python
         2.3, the timeit module offers more control and sophistication, but for
         now IPython supports Python 2.2, so we can not rely on timeit being
         present.
         
         Some examples:
 
           In [1]: time 2**128
           CPU times: user 0.00 s, sys: 0.00 s, total: 0.00 s
           Wall time: 0.00
           Out[1]: 340282366920938463463374607431768211456L
 
           In [2]: n = 1000000
 
           In [3]: time sum(range(n))
           CPU times: user 1.20 s, sys: 0.05 s, total: 1.25 s
           Wall time: 1.37
           Out[3]: 499999500000L
 
           In [4]: time print 'hello world'
           hello world
           CPU times: user 0.00 s, sys: 0.00 s, total: 0.00 s
           Wall time: 0.00
           """
         
         # fail immediately if the given expression can't be compiled
         try:
             mode = 'eval'
             code = compile(parameter_s,'<timed eval>',mode)
         except SyntaxError:
             mode = 'exec'
             code = compile(parameter_s,'<timed exec>',mode)
         # skew measurement as little as possible
         glob = self.shell.user_ns
         clk = clock2
         wtime = time.time
         # time execution
         wall_st = wtime()
         if mode=='eval':
             st = clk()
             out = eval(code,glob)
             end = clk()
         else:
             st = clk()
             exec code in glob
             end = clk()
             out = None
         wall_end = wtime()
         # Compute actual times and report
         wall_time = wall_end-wall_st
         cpu_user = end[0]-st[0]
         cpu_sys = end[1]-st[1]
         cpu_tot = cpu_user+cpu_sys
         print "CPU times: user %.2f s, sys: %.2f s, total: %.2f s" % \
               (cpu_user,cpu_sys,cpu_tot)
         print "Wall time: %.2f" % wall_time
         return out
 
     def magic_macro(self,parameter_s = ''):
         """Define a set of input lines as a macro for future re-execution.
 
         Usage:\\
           %macro name n1:n2 n3:n4 ... n5 .. n6 ...
 
         This will define a global variable called `name` which is a string
         made of joining the slices and lines you specify (n1,n2,... numbers
         above) from your input history into a single string. This variable
         acts like an automatic function which re-executes those lines as if
         you had typed them. You just type 'name' at the prompt and the code
         executes.
 
         Note that the slices use the standard Python slicing notation (5:8
         means include lines numbered 5,6,7).
 
         For example, if your history contains (%hist prints it):
         
           44: x=1\\
           45: y=3\\
           46: z=x+y\\
           47: print x\\
           48: a=5\\
           49: print 'x',x,'y',y\\
 
         you can create a macro with lines 44 through 47 (included) and line 49
         called my_macro with:
 
           In [51]: %macro my_macro 44:48 49
 
         Now, typing `my_macro` (without quotes) will re-execute all this code
         in one pass.
 
         You don't need to give the line-numbers in order, and any given line
         number can appear multiple times. You can assemble macros with any
         lines from your input history in any order.
 
         The macro is a simple object which holds its value in an attribute,
         but IPython's display system checks for macros and executes them as
         code instead of printing them when you type their name.
 
         You can view a macro's contents by explicitly printing it with:
         
           'print macro_name'.
 
         For one-off cases which DON'T contain magic function calls in them you
         can obtain similar results by explicitly executing slices from your
         input history with:
 
           In [60]: exec In[44:48]+In[49]"""
 
         args = parameter_s.split()
         name,ranges = args[0], args[1:]
         #print 'rng',ranges  # dbg
         lines = self.extract_input_slices(ranges)
         macro = Macro(lines)
         self.shell.user_ns.update({name:macro})
         print 'Macro `%s` created. To execute, type its name (without quotes).' % name
         print 'Macro contents:'
         print macro
 
     def magic_save(self,parameter_s = ''):
         """Save a set of lines to a given filename.
 
         Usage:\\
           %save filename n1:n2 n3:n4 ... n5 .. n6 ...
 
         This function uses the same syntax as %macro for line extraction, but
         instead of creating a macro it saves the resulting string to the
         filename you specify.
 
         It adds a '.py' extension to the file if you don't do so yourself, and
         it asks for confirmation before overwriting existing files."""
 
         args = parameter_s.split()
         fname,ranges = args[0], args[1:]
         if not fname.endswith('.py'):
             fname += '.py'
         if os.path.isfile(fname):
             ans = raw_input('File `%s` exists. Overwrite (y/[N])? ' % fname)
             if ans.lower() not in ['y','yes']:
                 print 'Operation cancelled.'
                 return
         cmds = ''.join(self.extract_input_slices(ranges))
         f = file(fname,'w')
         f.write(cmds)
         f.close()
         print 'The following commands were written to file `%s`:' % fname
         print cmds
 
     def magic_ed(self,parameter_s = ''):
         """Alias to %edit."""
         return self.magic_edit(parameter_s)
 
     def magic_edit(self,parameter_s = '',last_call=['','']):
         """Bring up an editor and execute the resulting code.
 
         Usage:
           %edit [options] [args]
 
         %edit runs IPython's editor hook.  The default version of this hook is
         set to call the __IPYTHON__.rc.editor command.  This is read from your
         environment variable $EDITOR.  If this isn't found, it will default to
         vi under Linux/Unix and to notepad under Windows.  See the end of this
         docstring for how to change the editor hook.
 
         You can also set the value of this editor via the command line option
         '-editor' or in your ipythonrc file. This is useful if you wish to use
         specifically for IPython an editor different from your typical default
         (and for Windows users who typically don't set environment variables).
 
         This command allows you to conveniently edit multi-line code right in
         your IPython session.
         
         If called without arguments, %edit opens up an empty editor with a
         temporary file and will execute the contents of this file when you
         close it (don't forget to save it!).
 
         Options:
 
         -p: this will call the editor with the same data as the previous time
         it was used, regardless of how long ago (in your current session) it
         was.
 
         -x: do not execute the edited code immediately upon exit. This is
         mainly useful if you are editing programs which need to be called with
         command line arguments, which you can then do using %run.
 
         Arguments:
 
         If arguments are given, the following possibilites exist:
 
         - The arguments are numbers or pairs of colon-separated numbers (like
         1 4:8 9). These are interpreted as lines of previous input to be
         loaded into the editor. The syntax is the same of the %macro command.
 
         - If the argument doesn't start with a number, it is evaluated as a
         variable and its contents loaded into the editor. You can thus edit
         any string which contains python code (including the result of
         previous edits).
 
         - If the argument is the name of an object (other than a string),
         IPython will try to locate the file where it was defined and open the
         editor at the point where it is defined. You can use `%edit function`
         to load an editor exactly at the point where 'function' is defined,
         edit it and have the file be executed automatically.
 
         Note: opening at an exact line is only supported under Unix, and some
         editors (like kedit and gedit up to Gnome 2.8) do not understand the
         '+NUMBER' parameter necessary for this feature. Good editors like
         (X)Emacs, vi, jed, pico and joe all do.
 
         - If the argument is not found as a variable, IPython will look for a
         file with that name (adding .py if necessary) and load it into the
         editor. It will execute its contents with execfile() when you exit,
         loading any code in the file into your interactive namespace.
 
         After executing your code, %edit will return as output the code you
         typed in the editor (except when it was an existing file). This way
         you can reload the code in further invocations of %edit as a variable,
         via _<NUMBER> or Out[<NUMBER>], where <NUMBER> is the prompt number of
         the output.
 
         Note that %edit is also available through the alias %ed.
 
         This is an example of creating a simple function inside the editor and
         then modifying it. First, start up the editor:
 
         In [1]: ed\\
         Editing... done. Executing edited code...\\
         Out[1]: 'def foo():\\n    print "foo() was defined in an editing session"\\n'
 
         We can then call the function foo():
         
         In [2]: foo()\\
         foo() was defined in an editing session
 
         Now we edit foo.  IPython automatically loads the editor with the
         (temporary) file where foo() was previously defined:
         
         In [3]: ed foo\\
         Editing... done. Executing edited code...
 
         And if we call foo() again we get the modified version:
         
         In [4]: foo()\\
         foo() has now been changed!
 
         Here is an example of how to edit a code snippet successive
         times. First we call the editor:
 
         In [8]: ed\\
         Editing... done. Executing edited code...\\
         hello\\
         Out[8]: "print 'hello'\\n"
 
         Now we call it again with the previous output (stored in _):
 
         In [9]: ed _\\
         Editing... done. Executing edited code...\\
         hello world\\
         Out[9]: "print 'hello world'\\n"
 
         Now we call it with the output #8 (stored in _8, also as Out[8]):
 
         In [10]: ed _8\\
         Editing... done. Executing edited code...\\
         hello again\\
         Out[10]: "print 'hello again'\\n"
 
 
         Changing the default editor hook:
 
         If you wish to write your own editor hook, you can put it in a
         configuration file which you load at startup time.  The default hook
         is defined in the IPython.hooks module, and you can use that as a
         starting example for further modifications.  That file also has
         general instructions on how to set a new hook for use once you've
         defined it."""
         
         # FIXME: This function has become a convoluted mess.  It needs a
         # ground-up rewrite with clean, simple logic.
 
         def make_filename(arg):
             "Make a filename from the given args"
             try:
                 filename = get_py_filename(arg)
             except IOError:
                 if args.endswith('.py'):
                     filename = arg
                 else:
                     filename = None
             return filename
 
         # custom exceptions
         class DataIsObject(Exception): pass
 
         opts,args = self.parse_options(parameter_s,'px')
 
         # Default line number value
         lineno = None
         if opts.has_key('p'):
             args = '_%s' % last_call[0]
             if not self.shell.user_ns.has_key(args):
                 args = last_call[1]
             
         # use last_call to remember the state of the previous call, but don't
         # let it be clobbered by successive '-p' calls.
         try:
             last_call[0] = self.shell.outputcache.prompt_count
             if not opts.has_key('p'):
                 last_call[1] = parameter_s
         except:
             pass
 
         # by default this is done with temp files, except when the given
         # arg is a filename
         use_temp = 1
 
         if re.match(r'\d',args):
             # Mode where user specifies ranges of lines, like in %macro.
             # This means that you can't edit files whose names begin with
             # numbers this way. Tough.
             ranges = args.split()
             data = ''.join(self.extract_input_slices(ranges))
         elif args.endswith('.py'):
             filename = make_filename(args)
             data = ''
             use_temp = 0
         elif args:
             try:
                 # Load the parameter given as a variable. If not a string,
                 # process it as an object instead (below)
 
                 #print '*** args',args,'type',type(args)  # dbg
                 data = eval(args,self.shell.user_ns)
                 if not type(data) in StringTypes:
                     raise DataIsObject
             except (NameError,SyntaxError):
                 # given argument is not a variable, try as a filename
                 filename = make_filename(args)
                 if filename is None:
                     warn("Argument given (%s) can't be found as a variable "
                          "or as a filename." % args)
                     return
                 data = ''
                 use_temp = 0
             except DataIsObject:
                 # For objects, try to edit the file where they are defined
                 try:
                     filename = inspect.getabsfile(data)
                     datafile = 1
                 except TypeError:
                     filename = make_filename(args)
                     datafile = 1
                     warn('Could not find file where `%s` is defined.\n'
                          'Opening a file named `%s`' % (args,filename))
                 # Now, make sure we can actually read the source (if it was in
                 # a temp file it's gone by now).
                 if datafile:
                     try:
                         lineno = inspect.getsourcelines(data)[1]
                     except IOError:
                         filename = make_filename(args)
                         if filename is None:
                             warn('The file `%s` where `%s` was defined cannot '
                                  'be read.' % (filename,data))
                             return
                 use_temp = 0
         else:
             data = ''
 
         if use_temp:
             filename = tempfile.mktemp('.py')
             self.shell.tempfiles.append(filename)
         
         if data and use_temp:
             tmp_file = open(filename,'w')
             tmp_file.write(data)
             tmp_file.close()
 
         # do actual editing here
         print 'Editing...',
         sys.stdout.flush()
         self.shell.hooks.editor(filename,lineno)
         if opts.has_key('x'):  # -x prevents actual execution
             print
         else:
             print 'done. Executing edited code...'
             try:
                 self.shell.safe_execfile(filename,self.shell.user_ns)
             except IOError,msg:
                 if msg.filename == filename:
                     warn('File not found. Did you forget to save?')
                     return
                 else:
                     self.shell.showtraceback()
             except:
                 self.shell.showtraceback()
         if use_temp:
             contents = open(filename).read()
             return contents
 
     def magic_xmode(self,parameter_s = ''):
         """Switch modes for the exception handlers.
 
         Valid modes: Plain, Context and Verbose.
 
         If called without arguments, acts as a toggle."""
 
         def xmode_switch_err(name):
             warn('Error changing %s exception modes.\n%s' %
                  (name,sys.exc_info()[1]))
 
         shell = self.shell
         new_mode = parameter_s.strip().capitalize()
         try:
             shell.InteractiveTB.set_mode(mode=new_mode)
             print 'Exception reporting mode:',shell.InteractiveTB.mode
         except:
             xmode_switch_err('user')
 
         # threaded shells use a special handler in sys.excepthook
         if shell.isthreaded:
             try:
                 shell.sys_excepthook.set_mode(mode=new_mode)
             except:
                 xmode_switch_err('threaded')
             
     def magic_colors(self,parameter_s = ''):
         """Switch color scheme for prompts, info system and exception handlers.
 
         Currently implemented schemes: NoColor, Linux, LightBG.
 
         Color scheme names are not case-sensitive."""
 
         def color_switch_err(name):
             warn('Error changing %s color schemes.\n%s' %
                  (name,sys.exc_info()[1]))
             
         
         new_scheme = parameter_s.strip()
         if not new_scheme:
             print 'You must specify a color scheme.'
             return
         # Under Windows, check for Gary Bishop's readline, which is necessary
         # for ANSI coloring
         if os.name in ['nt','dos']:
             try:
                 import readline
             except ImportError:
                 has_readline = 0
             else:
                 try:
                     readline.GetOutputFile()
                 except AttributeError:
                     has_readline = 0
                 else:
                     has_readline = 1
             if not has_readline:
                 msg = """\
 Proper color support under MS Windows requires Gary Bishop's readline library.
 You can find it at:
 http://sourceforge.net/projects/uncpythontools
 Gary's readline needs the ctypes module, from:
 http://starship.python.net/crew/theller/ctypes
 
 Defaulting color scheme to 'NoColor'"""
                 new_scheme = 'NoColor'
                 warn(msg)
         # local shortcut
         shell = self.shell
         
         # Set prompt colors
         try:
             shell.outputcache.set_colors(new_scheme)
         except:
             color_switch_err('prompt')
         else:
             shell.rc.colors = \
                        shell.outputcache.color_table.active_scheme_name
         # Set exception colors
         try:
             shell.InteractiveTB.set_colors(scheme = new_scheme)
             shell.SyntaxTB.set_colors(scheme = new_scheme)
         except:
             color_switch_err('exception')
 
         # threaded shells use a verbose traceback in sys.excepthook
         if shell.isthreaded:
             try:
                 shell.sys_excepthook.set_colors(scheme=new_scheme)
             except:
                 color_switch_err('system exception handler')
         
         # Set info (for 'object?') colors
         if shell.rc.color_info:
             try:
                 shell.inspector.set_active_scheme(new_scheme)
             except:
                 color_switch_err('object inspector')
         else:
             shell.inspector.set_active_scheme('NoColor')
                 
     def magic_color_info(self,parameter_s = ''):
         """Toggle color_info.
 
         The color_info configuration parameter controls whether colors are
         used for displaying object details (by things like %psource, %pfile or
         the '?' system). This function toggles this value with each call.
 
         Note that unless you have a fairly recent pager (less works better
         than more) in your system, using colored object information displays
         will not work properly. Test it and see."""
         
         self.shell.rc.color_info = 1 - self.shell.rc.color_info
         self.magic_colors(self.shell.rc.colors)
         print 'Object introspection functions have now coloring:',
         print ['OFF','ON'][self.shell.rc.color_info]
 
     def magic_Pprint(self, parameter_s=''):
         """Toggle pretty printing on/off."""
         
         self.shell.outputcache.Pprint = 1 - self.shell.outputcache.Pprint
         print 'Pretty printing has been turned', \
               ['OFF','ON'][self.shell.outputcache.Pprint]
         
     def magic_exit(self, parameter_s=''):
         """Exit IPython, confirming if configured to do so.
 
         You can configure whether IPython asks for confirmation upon exit by
         setting the confirm_exit flag in the ipythonrc file."""
 
         self.shell.exit()
 
     def magic_quit(self, parameter_s=''):
         """Exit IPython, confirming if configured to do so (like %exit)"""
 
         self.shell.exit()
         
     def magic_Exit(self, parameter_s=''):
         """Exit IPython without confirmation."""
 
         self.shell.exit_now = True
 
     def magic_Quit(self, parameter_s=''):
         """Exit IPython without confirmation (like %Exit)."""
 
         self.shell.exit_now = True
         
     #......................................................................
     # Functions to implement unix shell-type things
     
     def magic_alias(self, parameter_s = ''):
         """Define an alias for a system command.
 
         '%alias alias_name cmd' defines 'alias_name' as an alias for 'cmd'
 
         Then, typing 'alias_name params' will execute the system command 'cmd
         params' (from your underlying operating system).
 
         Aliases have lower precedence than magic functions and Python normal
         variables, so if 'foo' is both a Python variable and an alias, the
         alias can not be executed until 'del foo' removes the Python variable.
 
         You can use the %l specifier in an alias definition to represent the
         whole line when the alias is called.  For example:
 
           In [2]: alias all echo "Input in brackets: <%l>"\\
           In [3]: all hello world\\
           Input in brackets: <hello world>
 
         You can also define aliases with parameters using %s specifiers (one
         per parameter):
         
           In [1]: alias parts echo first %s second %s\\
           In [2]: %parts A B\\
           first A second B\\
           In [3]: %parts A\\
           Incorrect number of arguments: 2 expected.\\
           parts is an alias to: 'echo first %s second %s'
 
         Note that %l and %s are mutually exclusive.  You can only use one or
         the other in your aliases.
 
         Aliases expand Python variables just like system calls using ! or !! 
         do: all expressions prefixed with '$' get expanded.  For details of
         the semantic rules, see PEP-215:
         http://www.python.org/peps/pep-0215.html.  This is the library used by
         IPython for variable expansion.  If you want to access a true shell
         variable, an extra $ is necessary to prevent its expansion by IPython:
 
         In [6]: alias show echo\\
         In [7]: PATH='A Python string'\\
         In [8]: show $PATH\\
         A Python string\\
         In [9]: show $$PATH\\
         /usr/local/lf9560/bin:/usr/local/intel/compiler70/ia32/bin:...
 
         You can use the alias facility to acess all of $PATH.  See the %rehash
         and %rehashx functions, which automatically create aliases for the
         contents of your $PATH.
 
         If called with no parameters, %alias prints the current alias table."""
 
         par = parameter_s.strip()
         if not par:
             if self.shell.rc.automagic:
                 prechar = ''
             else:
                 prechar = self.shell.ESC_MAGIC
             print 'Alias\t\tSystem Command\n'+'-'*30
             atab = self.shell.alias_table
             aliases = atab.keys()
             aliases.sort()
             for alias in aliases:
                 print prechar+alias+'\t\t'+atab[alias][1]
             print '-'*30+'\nTotal number of aliases:',len(aliases)
             return
         try:
             alias,cmd = par.split(None,1)
         except:
             print OInspect.getdoc(self.magic_alias)
         else:
             nargs = cmd.count('%s')
             if nargs>0 and cmd.find('%l')>=0:
                 error('The %s and %l specifiers are mutually exclusive '
                       'in alias definitions.')
             else:  # all looks OK
                 self.shell.alias_table[alias] = (nargs,cmd)
                 self.shell.alias_table_validate(verbose=1)
     # end magic_alias
 
     def magic_unalias(self, parameter_s = ''):
         """Remove an alias"""
 
         aname = parameter_s.strip()
         if aname in self.shell.alias_table:
             del self.shell.alias_table[aname]
             
     def magic_rehash(self, parameter_s = ''):
         """Update the alias table with all entries in $PATH.
 
         This version does no checks on execute permissions or whether the
         contents of $PATH are truly files (instead of directories or something
         else).  For such a safer (but slower) version, use %rehashx."""
 
         # This function (and rehashx) manipulate the alias_table directly
         # rather than calling magic_alias, for speed reasons.  A rehash on a
         # typical Linux box involves several thousand entries, so efficiency
         # here is a top concern.
         
         path = filter(os.path.isdir,os.environ['PATH'].split(os.pathsep))
         alias_table = self.shell.alias_table
         for pdir in path:
             for ff in os.listdir(pdir):
                 # each entry in the alias table must be (N,name), where
                 # N is the number of positional arguments of the alias.
                 alias_table[ff] = (0,ff)
         # Make sure the alias table doesn't contain keywords or builtins
         self.shell.alias_table_validate()
         # Call again init_auto_alias() so we get 'rm -i' and other modified
         # aliases since %rehash will probably clobber them
         self.shell.init_auto_alias()
 
     def magic_rehashx(self, parameter_s = ''):
         """Update the alias table with all executable files in $PATH.
 
         This version explicitly checks that every entry in $PATH is a file
         with execute access (os.X_OK), so it is much slower than %rehash.
 
         Under Windows, it checks executability as a match agains a
         '|'-separated string of extensions, stored in the IPython config
         variable win_exec_ext.  This defaults to 'exe|com|bat'. """
         
         path = filter(os.path.isdir,os.environ['PATH'].split(os.pathsep))
         alias_table = self.shell.alias_table
 
         if os.name == 'posix':
             isexec = lambda fname:os.path.isfile(fname) and \
                      os.access(fname,os.X_OK)
         else:
 
             try:
                 winext = os.environ['pathext'].replace(';','|').replace('.','')
             except KeyError:
                 winext = 'exe|com|bat'
     
             execre = re.compile(r'(.*)\.(%s)$' % winext,re.IGNORECASE)
             isexec = lambda fname:os.path.isfile(fname) and execre.match(fname)
         savedir = os.getcwd()
         try:
             # write the whole loop for posix/Windows so we don't have an if in
             # the innermost part
             if os.name == 'posix':
                 for pdir in path:
                     os.chdir(pdir)
                     for ff in os.listdir(pdir):
                         if isexec(ff):
                             # each entry in the alias table must be (N,name),
                             # where N is the number of positional arguments of the
                             # alias.
                             alias_table[ff] = (0,ff)
             else:
                 for pdir in path:
                     os.chdir(pdir)
                     for ff in os.listdir(pdir):
                         if isexec(ff):
                             alias_table[execre.sub(r'\1',ff)] = (0,ff)
             # Make sure the alias table doesn't contain keywords or builtins
             self.shell.alias_table_validate()
             # Call again init_auto_alias() so we get 'rm -i' and other
             # modified aliases since %rehashx will probably clobber them
             self.shell.init_auto_alias()
         finally:
             os.chdir(savedir)
         
     def magic_pwd(self, parameter_s = ''):
         """Return the current working directory path."""
         return os.getcwd()
 
     def magic_cd(self, parameter_s=''):
         """Change the current working directory.
 
         This command automatically maintains an internal list of directories
         you visit during your IPython session, in the variable _dh. The
         command %dhist shows this history nicely formatted.
 
         Usage:
 
           cd 'dir': changes to directory 'dir'.
 
           cd -: changes to the last visited directory.
 
           cd -<n>: changes to the n-th directory in the directory history.
 
           cd -b <bookmark_name>: jump to a bookmark set by %bookmark
              (note: cd <bookmark_name> is enough if there is no
               directory <bookmark_name>, but a bookmark with the name exists.)
 
         Options:
 
         -q: quiet.  Do not print the working directory after the cd command is
         executed.  By default IPython's cd command does print this directory,
         since the default prompts do not display path information.
         
         Note that !cd doesn't work for this purpose because the shell where
         !command runs is immediately discarded after executing 'command'."""
 
         parameter_s = parameter_s.strip()
         bkms = self.shell.persist.get("bookmarks",{})
 
         numcd = re.match(r'(-)(\d+)$',parameter_s)
         # jump in directory history by number
         if numcd:
             nn = int(numcd.group(2))
             try:
                 ps = self.shell.user_ns['_dh'][nn]
             except IndexError:
                 print 'The requested directory does not exist in history.'
                 return
             else:
                 opts = {}
         else:
             opts,ps = self.parse_options(parameter_s,'qb',mode='string')
         # jump to previous
         if ps == '-':
             try:
                 ps = self.shell.user_ns['_dh'][-2]
             except IndexError:
                 print 'No previous directory to change to.'
                 return
         # jump to bookmark
         elif opts.has_key('b') or (bkms.has_key(ps) and not os.path.isdir(ps)):
             if bkms.has_key(ps):
                 target = bkms[ps]
                 print '(bookmark:%s) -> %s' % (ps,target)
                 ps = target
             else:
                 if bkms:
                     error("Bookmark '%s' not found.  "
                           "Use '%bookmark -l' to see your bookmarks." % ps)
                 else:
                     print "Bookmarks not set - use %bookmark <bookmarkname>"
                 return
             
         # at this point ps should point to the target dir
         if ps:
             try:
                 os.chdir(os.path.expanduser(ps))
             except OSError:
                 print sys.exc_info()[1]
             else:
                 self.shell.user_ns['_dh'].append(os.getcwd())
         else:
             os.chdir(self.shell.home_dir)
             self.shell.user_ns['_dh'].append(os.getcwd())
         if not 'q' in opts:
             print self.shell.user_ns['_dh'][-1]
 
     def magic_dhist(self, parameter_s=''):
         """Print your history of visited directories.
 
         %dhist       -> print full history\\
         %dhist n     -> print last n entries only\\
         %dhist n1 n2 -> print entries between n1 and n2 (n1 not included)\\
 
         This history is automatically maintained by the %cd command, and
         always available as the global list variable _dh. You can use %cd -<n>
         to go to directory number <n>."""
 
         dh = self.shell.user_ns['_dh']
         if parameter_s:
             try:
                 args = map(int,parameter_s.split())
             except:
                 self.arg_err(Magic.magic_dhist)
                 return
             if len(args) == 1:
                 ini,fin = max(len(dh)-(args[0]),0),len(dh)
             elif len(args) == 2:
                 ini,fin = args
             else:
                 self.arg_err(Magic.magic_dhist)
                 return
         else:
             ini,fin = 0,len(dh)
         nlprint(dh,
                 header = 'Directory history (kept in _dh)',
                 start=ini,stop=fin)
 
     def magic_env(self, parameter_s=''):
         """List environment variables."""
         
         return os.environ.data
 
     def magic_pushd(self, parameter_s=''):
         """Place the current dir on stack and change directory.
         
         Usage:\\
           %pushd ['dirname']
 
         %pushd with no arguments does a %pushd to your home directory.
         """
         if parameter_s == '': parameter_s = '~'
         dir_s = self.shell.dir_stack
         if len(dir_s)>0 and os.path.expanduser(parameter_s) != \
            os.path.expanduser(self.shell.dir_stack[0]):
             try:
                 self.magic_cd(parameter_s)
                 dir_s.insert(0,os.getcwd().replace(self.home_dir,'~'))
                 self.magic_dirs()
             except:
                 print 'Invalid directory'
         else:
             print 'You are already there!'
 
     def magic_popd(self, parameter_s=''):
         """Change to directory popped off the top of the stack.
         """
         if len (self.shell.dir_stack) > 1:
             self.shell.dir_stack.pop(0)
             self.magic_cd(self.shell.dir_stack[0])
             print self.shell.dir_stack[0]
         else:
             print "You can't remove the starting directory from the stack:",\
                   self.shell.dir_stack
 
     def magic_dirs(self, parameter_s=''):
         """Return the current directory stack."""
 
         return self.shell.dir_stack[:]
 
     def magic_sc(self, parameter_s=''):
         """Shell capture - execute a shell command and capture its output.
 
         %sc [options] varname=command
 
         IPython will run the given command using commands.getoutput(), and
         will then update the user's interactive namespace with a variable
         called varname, containing the value of the call.  Your command can
         contain shell wildcards, pipes, etc.
 
         The '=' sign in the syntax is mandatory, and the variable name you
         supply must follow Python's standard conventions for valid names.
 
         Options:
 
           -l: list output.  Split the output on newlines into a list before
           assigning it to the given variable.  By default the output is stored
           as a single string.
 
           -v: verbose.  Print the contents of the variable.
 
         In most cases you should not need to split as a list, because the
         returned value is a special type of string which can automatically
         provide its contents either as a list (split on newlines) or as a
         space-separated string.  These are convenient, respectively, either
         for sequential processing or to be passed to a shell command.
 
         For example:
 
             # Capture into variable a
             In [9]: sc a=ls *py
 
             # a is a string with embedded newlines
             In [10]: a
             Out[10]: 'setup.py\nwin32_manual_post_install.py'
 
             # which can be seen as a list:
             In [11]: a.l
             Out[11]: ['setup.py', 'win32_manual_post_install.py']
 
             # or as a whitespace-separated string:
             In [12]: a.s
             Out[12]: 'setup.py win32_manual_post_install.py'
 
             # a.s is useful to pass as a single command line:
             In [13]: !wc -l $a.s
               146 setup.py
               130 win32_manual_post_install.py
               276 total
 
             # while the list form is useful to loop over:
             In [14]: for f in a.l:
                ....:      !wc -l $f
                ....:
             146 setup.py
             130 win32_manual_post_install.py
 
         Similiarly, the lists returned by the -l option are also special, in
         the sense that you can equally invoke the .s attribute on them to
         automatically get a whitespace-separated string from their contents:
 
             In [1]: sc -l b=ls *py
 
             In [2]: b
             Out[2]: ['setup.py', 'win32_manual_post_install.py']
 
             In [3]: b.s
             Out[3]: 'setup.py win32_manual_post_install.py'
 
         In summary, both the lists and strings used for ouptut capture have
         the following special attributes:
 
             .l (or .list) : value as list.
             .n (or .nlstr): value as newline-separated string.
             .s (or .spstr): value as space-separated string.
         """
 
         opts,args = self.parse_options(parameter_s,'lv')
         # Try to get a variable name and command to run
         try:
             # the variable name must be obtained from the parse_options
             # output, which uses shlex.split to strip options out.
             var,_ = args.split('=',1)
             var = var.strip()
             # But the the command has to be extracted from the original input
             # parameter_s, not on what parse_options returns, to avoid the
             # quote stripping which shlex.split performs on it.
             _,cmd = parameter_s.split('=',1)
         except ValueError:
             var,cmd = '',''
         if not var:
             error('you must specify a variable to assign the command to.')
             return
         # If all looks ok, proceed
         out,err = self.shell.getoutputerror(cmd)
         if err:
             print >> Term.cerr,err
         if opts.has_key('l'):
             out = SList(out.split('\n'))
         else:
             out = LSString(out)
         if opts.has_key('v'):
             print '%s ==\n%s' % (var,pformat(out))
         self.shell.user_ns.update({var:out})
 
     def magic_sx(self, parameter_s=''):
         """Shell execute - run a shell command and capture its output.
 
         %sx command
 
         IPython will run the given command using commands.getoutput(), and
         return the result formatted as a list (split on '\\n').  Since the
         output is _returned_, it will be stored in ipython's regular output
         cache Out[N] and in the '_N' automatic variables.
 
         Notes:
 
         1) If an input line begins with '!!', then %sx is automatically
         invoked.  That is, while:
           !ls
         causes ipython to simply issue system('ls'), typing
           !!ls
         is a shorthand equivalent to:
           %sx ls
         
         2) %sx differs from %sc in that %sx automatically splits into a list,
         like '%sc -l'.  The reason for this is to make it as easy as possible
         to process line-oriented shell output via further python commands.
         %sc is meant to provide much finer control, but requires more
         typing.
 
         3) Just like %sc -l, this is a list with special attributes:
 
           .l (or .list) : value as list.
           .n (or .nlstr): value as newline-separated string.
           .s (or .spstr): value as whitespace-separated string.
 
         This is very useful when trying to use such lists as arguments to
         system commands."""
 
         if parameter_s:
             out,err = self.shell.getoutputerror(parameter_s)
             if err:
                 print >> Term.cerr,err
             return SList(out.split('\n'))
 
     def magic_bg(self, parameter_s=''):
         """Run a job in the background, in a separate thread.
 
         For example,
 
           %bg myfunc(x,y,z=1)
 
         will execute 'myfunc(x,y,z=1)' in a background thread.  As soon as the
         execution starts, a message will be printed indicating the job
         number.  If your job number is 5, you can use
 
           myvar = jobs.result(5)  or  myvar = jobs[5].result
 
         to assign this result to variable 'myvar'.
 
         IPython has a job manager, accessible via the 'jobs' object.  You can
         type jobs? to get more information about it, and use jobs.<TAB> to see
         its attributes.  All attributes not starting with an underscore are
         meant for public use.
 
         In particular, look at the jobs.new() method, which is used to create
         new jobs.  This magic %bg function is just a convenience wrapper
         around jobs.new(), for expression-based jobs.  If you want to create a
         new job with an explicit function object and arguments, you must call
         jobs.new() directly.
 
         The jobs.new docstring also describes in detail several important
         caveats associated with a thread-based model for background job
         execution.  Type jobs.new? for details.
 
         You can check the status of all jobs with jobs.status().
 
         The jobs variable is set by IPython into the Python builtin namespace.
         If you ever declare a variable named 'jobs', you will shadow this
         name.  You can either delete your global jobs variable to regain
         access to the job manager, or make a new name and assign it manually
         to the manager (stored in IPython's namespace).  For example, to
         assign the job manager to the Jobs name, use:
 
           Jobs = __builtins__.jobs"""
         
         self.shell.jobs.new(parameter_s,self.shell.user_ns)
         
     def magic_store(self, parameter_s=''):
         """Lightweight persistence for python variables.
 
         Example:
         
         ville@badger[~]|1> A = ['hello',10,'world']\\
         ville@badger[~]|2> %store A\\
         ville@badger[~]|3> Exit
         
         (IPython session is closed and started again...)
         
         ville@badger:~$ ipython -p pysh\\
         ville@badger[~]|1> print A
         
         ['hello', 10, 'world']
         
         Usage:
         
         %store       - Show list of all variables and their current values\\
         %store <var> - Store the *current* value of the variable to disk\\
         %store -d    - Remove the variable and its value from storage\\
         %store -r    - Remove all variables from storage
         
         It should be noted that if you change the value of a variable, you
         need to %store it again if you want to persist the new value.
         
         Note also that the variables will need to be pickleable; most basic
         python types can be safely %stored.
         """
         
         opts,args = self.parse_options(parameter_s,'dr',mode='list')
         # delete
         if opts.has_key('d'):
             try:
                 todel = args[0]
             except IndexError:
                 error('You must provide the variable to forget')
             else:
                 try:
                     del self.shell.persist['S:' + todel]
                 except:
                     error("Can't delete variable '%s'" % todel)
         # reset
         elif opts.has_key('r'):
             for k in self.shell.persist.keys():
                 if k.startswith('S:'):
                     del self.shell.persist[k]
         
         # run without arguments -> list variables & values
         elif not args:
             vars = [v[2:] for v in self.shell.persist.keys()
                     if v.startswith('S:')]
             vars.sort()            
             if vars:
                 size = max(map(len,vars))
             else:
                 size = 0
                 
             print 'Stored variables and their in-memory values:'
             fmt = '%-'+str(size)+'s -> %s'
             get = self.shell.user_ns.get
             for var in vars:
                 # print 30 first characters from every var
                 print fmt % (var,repr(get(var,'<unavailable>'))[:50])
         
         # default action - store the variable
         else:
             pickled = pickle.dumps(self.shell.user_ns[args[0] ])
             self.shell.persist[ 'S:' + args[0] ] = pickled
             print "Stored '%s' (%d bytes)" % (args[0], len(pickled))
     
     def magic_bookmark(self, parameter_s=''):
         """Manage IPython's bookmark system.
 
         %bookmark <name>       - set bookmark to current dir
         %bookmark <name> <dir> - set bookmark to <dir>
         %bookmark -l           - list all bookmarks
         %bookmark -d <name>    - remove bookmark
         %bookmark -r           - remove all bookmarks
 
         You can later on access a bookmarked folder with:
           %cd -b <name>
         or simply '%cd <name>' if there is no directory called <name> AND
         there is such a bookmark defined.
 
         Your bookmarks persist through IPython sessions, but they are
         associated with each profile."""
 
         opts,args = self.parse_options(parameter_s,'drl',mode='list')
         if len(args) > 2:
             error('You can only give at most two arguments')
             return
 
         bkms = self.shell.persist.get('bookmarks',{})
             
         if opts.has_key('d'):
             try:
                 todel = args[0]
             except IndexError:
                 error('You must provide a bookmark to delete')
             else:
                 try:
                     del bkms[todel]
                 except:
                     error("Can't delete bookmark '%s'" % todel)
         elif opts.has_key('r'):
             bkms = {}
         elif opts.has_key('l'):
             bks = bkms.keys()
             bks.sort()
             if bks:
                 size = max(map(len,bks))
             else:
                 size = 0
             fmt = '%-'+str(size)+'s -> %s'
             print 'Current bookmarks:'
             for bk in bks:
                 print fmt % (bk,bkms[bk])
         else:
             if not args:
                 error("You must specify the bookmark name")
             elif len(args)==1:
                 bkms[args[0]] = os.getcwd()
             elif len(args)==2:
                 bkms[args[0]] = args[1]
         self.shell.persist['bookmarks'] = bkms
 
     def magic_pycat(self, parameter_s=''):
         """Show a syntax-highlighted file through a pager.
 
         This magic is similar to the cat utility, but it will assume the file
         to be Python source and will show it with syntax highlighting. """
         
         filename = get_py_filename(parameter_s)
         page(self.shell.colorize(file_read(filename)),
              screen_lines=self.shell.rc.screen_length)
 
 # end Magic