allow IPython to run without writable home dir

get_ipython_dir() ensures that the *IPython* dir is writable, which is more relevant, but the home dir need not be writable. Some optional behaviors (e.g. `%logstart global`) will not work if the home dir is not writable, but IPython should not crash.  Approximately no other operations actually depend on writing directly to $HOME.

IPython/core/interactiveshell.py

@@ -1,2710 +1,2705 b''
 # -*- coding: utf-8 -*-
 """Main IPython class."""
 
 #-----------------------------------------------------------------------------
 #  Copyright (C) 2001 Janko Hauser <[e-mail]>
 #  Copyright (C) 2001-2007 Fernando Perez. <[e-mail]>
 #  Copyright (C) 2008-2011  The IPython Development Team
 #
 #  Distributed under the terms of the BSD License.  The full license is in
 #  the file COPYING, distributed as part of this software.
 #-----------------------------------------------------------------------------
 
 #-----------------------------------------------------------------------------
 # Imports
 #-----------------------------------------------------------------------------
 
 from __future__ import with_statement
 from __future__ import absolute_import
 
 import __builtin__ as builtin_mod
 import __future__
 import abc
 import ast
 import atexit
 import codeop
 import inspect
 import os
 import re
 import sys
 import tempfile
 import types
 try:
     from contextlib import nested
 except:
     from IPython.utils.nested_context import nested
 
 from IPython.config.configurable import SingletonConfigurable
 from IPython.core import debugger, oinspect
 from IPython.core import history as ipcorehist
 from IPython.core import page
 from IPython.core import prefilter
 from IPython.core import shadowns
 from IPython.core import ultratb
 from IPython.core.alias import AliasManager, AliasError
 from IPython.core.autocall import ExitAutocall
 from IPython.core.builtin_trap import BuiltinTrap
 from IPython.core.compilerop import CachingCompiler
 from IPython.core.display_trap import DisplayTrap
 from IPython.core.displayhook import DisplayHook
 from IPython.core.displaypub import DisplayPublisher
 from IPython.core.error import TryNext, UsageError
 from IPython.core.extensions import ExtensionManager
 from IPython.core.fakemodule import FakeModule, init_fakemod_dict
 from IPython.core.formatters import DisplayFormatter
 from IPython.core.history import HistoryManager
 from IPython.core.inputsplitter import IPythonInputSplitter
 from IPython.core.logger import Logger
 from IPython.core.macro import Macro
 from IPython.core.magic import Magic
 from IPython.core.payload import PayloadManager
 from IPython.core.plugin import PluginManager
 from IPython.core.prefilter import PrefilterManager, ESC_MAGIC
 from IPython.core.profiledir import ProfileDir
 from IPython.external.Itpl import ItplNS
 from IPython.utils import PyColorize
 from IPython.utils import io
 from IPython.utils import py3compat
 from IPython.utils.doctestreload import doctest_reload
 from IPython.utils.io import ask_yes_no, rprint
 from IPython.utils.ipstruct import Struct
 from IPython.utils.path import get_home_dir, get_ipython_dir, HomeDirError
 from IPython.utils.pickleshare import PickleShareDB
 from IPython.utils.process import system, getoutput
 from IPython.utils.strdispatch import StrDispatch
 from IPython.utils.syspathcontext import prepended_to_syspath
 from IPython.utils.text import (num_ini_spaces, format_screen, LSString, SList,
                                 DollarFormatter)
 from IPython.utils.traitlets import (Integer, CBool, CaselessStrEnum, Enum,
                                      List, Unicode, Instance, Type)
 from IPython.utils.warn import warn, error, fatal
 import IPython.core.hooks
 
 #-----------------------------------------------------------------------------
 # Globals
 #-----------------------------------------------------------------------------
 
 # compiled regexps for autoindent management
 dedent_re = re.compile(r'^\s+raise|^\s+return|^\s+pass')
 
 #-----------------------------------------------------------------------------
 # Utilities
 #-----------------------------------------------------------------------------
 
 def softspace(file, newvalue):
     """Copied from code.py, to remove the dependency"""
 
     oldvalue = 0
     try:
         oldvalue = file.softspace
     except AttributeError:
         pass
     try:
         file.softspace = newvalue
     except (AttributeError, TypeError):
         # "attribute-less object" or "read-only attributes"
         pass
     return oldvalue
 
 
 def no_op(*a, **kw): pass
 
 class NoOpContext(object):
     def __enter__(self): pass
     def __exit__(self, type, value, traceback): pass
 no_op_context = NoOpContext()
 
 class SpaceInInput(Exception): pass
 
 class Bunch: pass
 
 
 def get_default_colors():
     if sys.platform=='darwin':
         return "LightBG"
     elif os.name=='nt':
         return 'Linux'
     else:
         return 'Linux'
 
 
 class SeparateUnicode(Unicode):
     """A Unicode subclass to validate separate_in, separate_out, etc.
 
     This is a Unicode based trait that converts '0'->'' and '\\n'->'\n'.
     """
 
     def validate(self, obj, value):
         if value == '0': value = ''
         value = value.replace('\\n','\n')
         return super(SeparateUnicode, self).validate(obj, value)
 
 
 class ReadlineNoRecord(object):
     """Context manager to execute some code, then reload readline history
     so that interactive input to the code doesn't appear when pressing up."""
     def __init__(self, shell):
         self.shell = shell
         self._nested_level = 0
 
     def __enter__(self):
         if self._nested_level == 0:
             try:
                 self.orig_length = self.current_length()
                 self.readline_tail = self.get_readline_tail()
             except (AttributeError, IndexError):   # Can fail with pyreadline
                 self.orig_length, self.readline_tail = 999999, []
         self._nested_level += 1
 
     def __exit__(self, type, value, traceback):
         self._nested_level -= 1
         if self._nested_level == 0:
             # Try clipping the end if it's got longer
             try:
                 e = self.current_length() - self.orig_length
                 if e > 0:
                     for _ in range(e):
                         self.shell.readline.remove_history_item(self.orig_length)
 
                 # If it still doesn't match, just reload readline history.
                 if self.current_length() != self.orig_length \
                     or self.get_readline_tail() != self.readline_tail:
                     self.shell.refill_readline_hist()
             except (AttributeError, IndexError):
                 pass
         # Returning False will cause exceptions to propagate
         return False
 
     def current_length(self):
         return self.shell.readline.get_current_history_length()
 
     def get_readline_tail(self, n=10):
         """Get the last n items in readline history."""
         end = self.shell.readline.get_current_history_length() + 1
         start = max(end-n, 1)
         ghi = self.shell.readline.get_history_item
         return [ghi(x) for x in range(start, end)]
 
 
 _autocall_help = """
 Make IPython automatically call any callable object even if
 you didn't type explicit parentheses. For example, 'str 43' becomes 'str(43)'
 automatically. The value can be '0' to disable the feature, '1' for 'smart'
 autocall, where it is not applied if there are no more arguments on the line,
 and '2' for 'full' autocall, where all callable objects are automatically
 called (even if no arguments are present). The default is '1'.
 """
 
 #-----------------------------------------------------------------------------
 # Main IPython class
 #-----------------------------------------------------------------------------
 
 class InteractiveShell(SingletonConfigurable, Magic):
     """An enhanced, interactive shell for Python."""
 
     _instance = None
 
     autocall = Enum((0,1,2), default_value=1, config=True, help=
         """
         Make IPython automatically call any callable object even if you didn't
         type explicit parentheses. For example, 'str 43' becomes 'str(43)'
         automatically. The value can be '0' to disable the feature, '1' for
         'smart' autocall, where it is not applied if there are no more
         arguments on the line, and '2' for 'full' autocall, where all callable
         objects are automatically called (even if no arguments are present).
         The default is '1'.
         """
     )
     # TODO: remove all autoindent logic and put into frontends.
     # We can't do this yet because even runlines uses the autoindent.
     autoindent = CBool(True, config=True, help=
         """
         Autoindent IPython code entered interactively.
         """
     )
     automagic = CBool(True, config=True, help=
         """
         Enable magic commands to be called without the leading %.
         """
     )
     cache_size = Integer(1000, config=True, help=
         """
         Set the size of the output cache.  The default is 1000, you can
         change it permanently in your config file.  Setting it to 0 completely
         disables the caching system, and the minimum value accepted is 20 (if
         you provide a value less than 20, it is reset to 0 and a warning is
         issued).  This limit is defined because otherwise you'll spend more
         time re-flushing a too small cache than working
         """
     )
     color_info = CBool(True, config=True, help=
         """
         Use colors for displaying information about objects. Because this
         information is passed through a pager (like 'less'), and some pagers
         get confused with color codes, this capability can be turned off.
         """
     )
     colors = CaselessStrEnum(('NoColor','LightBG','Linux'),
                              default_value=get_default_colors(), config=True,
         help="Set the color scheme (NoColor, Linux, or LightBG)."
     )
     colors_force = CBool(False, help=
         """
         Force use of ANSI color codes, regardless of OS and readline
         availability.
         """
         # FIXME: This is essentially a hack to allow ZMQShell to show colors
         # without readline on Win32. When the ZMQ formatting system is
         # refactored, this should be removed.
     )
     debug = CBool(False, config=True)
     deep_reload = CBool(False, config=True, help=
         """
         Enable deep (recursive) reloading by default. IPython can use the
         deep_reload module which reloads changes in modules recursively (it
         replaces the reload() function, so you don't need to change anything to
         use it). deep_reload() forces a full reload of modules whose code may
         have changed, which the default reload() function does not.  When
         deep_reload is off, IPython will use the normal reload(), but
         deep_reload will still be available as dreload().
         """
     )
     display_formatter = Instance(DisplayFormatter)
     displayhook_class = Type(DisplayHook)
     display_pub_class = Type(DisplayPublisher)
 
     exit_now = CBool(False)
     exiter = Instance(ExitAutocall)
     def _exiter_default(self):
         return ExitAutocall(self)
     # Monotonically increasing execution counter
     execution_count = Integer(1)
     filename = Unicode("<ipython console>")
     ipython_dir= Unicode('', config=True) # Set to get_ipython_dir() in __init__
 
     # Input splitter, to split entire cells of input into either individual
     # interactive statements or whole blocks.
     input_splitter = Instance('IPython.core.inputsplitter.IPythonInputSplitter',
                               (), {})
     logstart = CBool(False, config=True, help=
         """
         Start logging to the default log file.
         """
     )
     logfile = Unicode('', config=True, help=
         """
         The name of the logfile to use.
         """
     )
     logappend = Unicode('', config=True, help=
         """
         Start logging to the given file in append mode.
         """
     )
     object_info_string_level = Enum((0,1,2), default_value=0,
                                     config=True)
     pdb = CBool(False, config=True, help=
         """
         Automatically call the pdb debugger after every exception.
         """
     )
     multiline_history = CBool(sys.platform != 'win32', config=True,
         help="Save multi-line entries as one entry in readline history"
     )
 
     prompt_in1 = Unicode('In [\\#]: ', config=True)
     prompt_in2 = Unicode('   .\\D.: ', config=True)
     prompt_out = Unicode('Out[\\#]: ', config=True)
     prompts_pad_left = CBool(True, config=True)
     quiet = CBool(False, config=True)
 
     history_length = Integer(10000, config=True)
 
     # The readline stuff will eventually be moved to the terminal subclass
     # but for now, we can't do that as readline is welded in everywhere.
     readline_use = CBool(True, config=True)
     readline_remove_delims = Unicode('-/~', config=True)
     # don't use \M- bindings by default, because they
     # conflict with 8-bit encodings. See gh-58,gh-88
     readline_parse_and_bind = List([
             'tab: complete',
             '"\C-l": clear-screen',
             'set show-all-if-ambiguous on',
             '"\C-o": tab-insert',
             '"\C-r": reverse-search-history',
             '"\C-s": forward-search-history',
             '"\C-p": history-search-backward',
             '"\C-n": history-search-forward',
             '"\e[A": history-search-backward',
             '"\e[B": history-search-forward',
             '"\C-k": kill-line',
             '"\C-u": unix-line-discard',
         ], allow_none=False, config=True)
 
     # TODO: this part of prompt management should be moved to the frontends.
     # Use custom TraitTypes that convert '0'->'' and '\\n'->'\n'
     separate_in = SeparateUnicode('\n', config=True)
     separate_out = SeparateUnicode('', config=True)
     separate_out2 = SeparateUnicode('', config=True)
     wildcards_case_sensitive = CBool(True, config=True)
     xmode = CaselessStrEnum(('Context','Plain', 'Verbose'),
                             default_value='Context', config=True)
 
     # Subcomponents of InteractiveShell
     alias_manager = Instance('IPython.core.alias.AliasManager')
     prefilter_manager = Instance('IPython.core.prefilter.PrefilterManager')
     builtin_trap = Instance('IPython.core.builtin_trap.BuiltinTrap')
     display_trap = Instance('IPython.core.display_trap.DisplayTrap')
     extension_manager = Instance('IPython.core.extensions.ExtensionManager')
     plugin_manager = Instance('IPython.core.plugin.PluginManager')
     payload_manager = Instance('IPython.core.payload.PayloadManager')
     history_manager = Instance('IPython.core.history.HistoryManager')
 
     profile_dir = Instance('IPython.core.application.ProfileDir')
     @property
     def profile(self):
         if self.profile_dir is not None:
             name = os.path.basename(self.profile_dir.location)
             return name.replace('profile_','')
 
 
     # Private interface
     _post_execute = Instance(dict)
 
     def __init__(self, config=None, ipython_dir=None, profile_dir=None,
                  user_ns=None, user_global_ns=None,
                  custom_exceptions=((), None)):
 
         # This is where traits with a config_key argument are updated
         # from the values on config.
         super(InteractiveShell, self).__init__(config=config)
         self.configurables = [self]
 
         # These are relatively independent and stateless
         self.init_ipython_dir(ipython_dir)
         self.init_profile_dir(profile_dir)
         self.init_instance_attrs()
         self.init_environment()
 
         # Create namespaces (user_ns, user_global_ns, etc.)
         self.init_create_namespaces(user_ns, user_global_ns)
         # This has to be done after init_create_namespaces because it uses
         # something in self.user_ns, but before init_sys_modules, which
         # is the first thing to modify sys.
         # TODO: When we override sys.stdout and sys.stderr before this class
         # is created, we are saving the overridden ones here. Not sure if this
         # is what we want to do.
         self.save_sys_module_state()
         self.init_sys_modules()
 
         # While we're trying to have each part of the code directly access what
         # it needs without keeping redundant references to objects, we have too
         # much legacy code that expects ip.db to exist.
         self.db = PickleShareDB(os.path.join(self.profile_dir.location, 'db'))
 
         self.init_history()
         self.init_encoding()
         self.init_prefilter()
 
         Magic.__init__(self, self)
 
         self.init_syntax_highlighting()
         self.init_hooks()
         self.init_pushd_popd_magic()
         # self.init_traceback_handlers use to be here, but we moved it below
         # because it and init_io have to come after init_readline.
         self.init_user_ns()
         self.init_logger()
         self.init_alias()
         self.init_builtins()
 
         # pre_config_initialization
 
         # The next section should contain everything that was in ipmaker.
         self.init_logstart()
 
         # The following was in post_config_initialization
         self.init_inspector()
         # init_readline() must come before init_io(), because init_io uses
         # readline related things.
         self.init_readline()
         # We save this here in case user code replaces raw_input, but it needs
         # to be after init_readline(), because PyPy's readline works by replacing
         # raw_input.
         if py3compat.PY3:
             self.raw_input_original = input
         else:
             self.raw_input_original = raw_input
         # init_completer must come after init_readline, because it needs to
         # know whether readline is present or not system-wide to configure the
         # completers, since the completion machinery can now operate
         # independently of readline (e.g. over the network)
         self.init_completer()
         # TODO: init_io() needs to happen before init_traceback handlers
         # because the traceback handlers hardcode the stdout/stderr streams.
         # This logic in in debugger.Pdb and should eventually be changed.
         self.init_io()
         self.init_traceback_handlers(custom_exceptions)
         self.init_prompts()
         self.init_display_formatter()
         self.init_display_pub()
         self.init_displayhook()
         self.init_reload_doctest()
         self.init_magics()
         self.init_pdb()
         self.init_extension_manager()
         self.init_plugin_manager()
         self.init_payload()
         self.hooks.late_startup_hook()
         atexit.register(self.atexit_operations)
 
     def get_ipython(self):
         """Return the currently running IPython instance."""
         return self
 
     #-------------------------------------------------------------------------
     # Trait changed handlers
     #-------------------------------------------------------------------------
 
     def _ipython_dir_changed(self, name, new):
         if not os.path.isdir(new):
             os.makedirs(new, mode = 0777)
 
     def set_autoindent(self,value=None):
         """Set the autoindent flag, checking for readline support.
 
         If called with no arguments, it acts as a toggle."""
 
         if value != 0 and not self.has_readline:
             if os.name == 'posix':
                 warn("The auto-indent feature requires the readline library")
             self.autoindent = 0
             return
         if value is None:
             self.autoindent = not self.autoindent
         else:
             self.autoindent = value
 
     #-------------------------------------------------------------------------
     # init_* methods called by __init__
     #-------------------------------------------------------------------------
 
     def init_ipython_dir(self, ipython_dir):
         if ipython_dir is not None:
             self.ipython_dir = ipython_dir
             return
 
         self.ipython_dir = get_ipython_dir()
 
     def init_profile_dir(self, profile_dir):
         if profile_dir is not None:
             self.profile_dir = profile_dir
             return
         self.profile_dir =\
             ProfileDir.create_profile_dir_by_name(self.ipython_dir, 'default')
 
     def init_instance_attrs(self):
         self.more = False
 
         # command compiler
         self.compile = CachingCompiler()
 
         # Make an empty namespace, which extension writers can rely on both
         # existing and NEVER being used by ipython itself.  This gives them a
         # convenient location for storing additional information and state
         # their extensions may require, without fear of collisions with other
         # ipython names that may develop later.
         self.meta = Struct()
 
         # Temporary files used for various purposes.  Deleted at exit.
         self.tempfiles = []
 
         # Keep track of readline usage (later set by init_readline)
         self.has_readline = False
 
         # keep track of where we started running (mainly for crash post-mortem)
         # This is not being used anywhere currently.
         self.starting_dir = os.getcwdu()
 
         # Indentation management
         self.indent_current_nsp = 0
 
         # Dict to track post-execution functions that have been registered
         self._post_execute = {}
 
     def init_environment(self):
         """Any changes we need to make to the user's environment."""
         pass
 
     def init_encoding(self):
         # Get system encoding at startup time.  Certain terminals (like Emacs
         # under Win32 have it set to None, and we need to have a known valid
         # encoding to use in the raw_input() method
         try:
             self.stdin_encoding = sys.stdin.encoding or 'ascii'
         except AttributeError:
             self.stdin_encoding = 'ascii'
 
     def init_syntax_highlighting(self):
         # Python source parser/formatter for syntax highlighting
         pyformat = PyColorize.Parser().format
         self.pycolorize = lambda src: pyformat(src,'str',self.colors)
 
     def init_pushd_popd_magic(self):
         # for pushd/popd management
-        try:
-            self.home_dir = get_home_dir()
-        except HomeDirError, msg:
-            fatal(msg)
+        self.home_dir = get_home_dir()
 
         self.dir_stack = []
 
     def init_logger(self):
         self.logger = Logger(self.home_dir, logfname='ipython_log.py',
                              logmode='rotate')
 
     def init_logstart(self):
         """Initialize logging in case it was requested at the command line.
         """
         if self.logappend:
             self.magic_logstart(self.logappend + ' append')
         elif self.logfile:
             self.magic_logstart(self.logfile)
         elif self.logstart:
             self.magic_logstart()
 
     def init_builtins(self):
         self.builtin_trap = BuiltinTrap(shell=self)
 
     def init_inspector(self):
         # Object inspector
         self.inspector = oinspect.Inspector(oinspect.InspectColors,
                                             PyColorize.ANSICodeColors,
                                             'NoColor',
                                             self.object_info_string_level)
 
     def init_io(self):
         # This will just use sys.stdout and sys.stderr. If you want to
         # override sys.stdout and sys.stderr themselves, you need to do that
         # *before* instantiating this class, because io holds onto
         # references to the underlying streams.
         if sys.platform == 'win32' and self.has_readline:
             io.stdout = io.stderr = io.IOStream(self.readline._outputfile)
         else:
             io.stdout = io.IOStream(sys.stdout)
             io.stderr = io.IOStream(sys.stderr)
 
     def init_prompts(self):
         # TODO: This is a pass for now because the prompts are managed inside
         # the DisplayHook. Once there is a separate prompt manager, this
         # will initialize that object and all prompt related information.
         pass
 
     def init_display_formatter(self):
         self.display_formatter = DisplayFormatter(config=self.config)
         self.configurables.append(self.display_formatter)
 
     def init_display_pub(self):
         self.display_pub = self.display_pub_class(config=self.config)
         self.configurables.append(self.display_pub)
 
     def init_displayhook(self):
         # Initialize displayhook, set in/out prompts and printing system
         self.displayhook = self.displayhook_class(
             config=self.config,
             shell=self,
             cache_size=self.cache_size,
             input_sep = self.separate_in,
             output_sep = self.separate_out,
             output_sep2 = self.separate_out2,
             ps1 = self.prompt_in1,
             ps2 = self.prompt_in2,
             ps_out = self.prompt_out,
             pad_left = self.prompts_pad_left
         )
         self.configurables.append(self.displayhook)
         # This is a context manager that installs/revmoes the displayhook at
         # the appropriate time.
         self.display_trap = DisplayTrap(hook=self.displayhook)
 
     def init_reload_doctest(self):
         # Do a proper resetting of doctest, including the necessary displayhook
         # monkeypatching
         try:
             doctest_reload()
         except ImportError:
             warn("doctest module does not exist.")
 
     #-------------------------------------------------------------------------
     # Things related to injections into the sys module
     #-------------------------------------------------------------------------
 
     def save_sys_module_state(self):
         """Save the state of hooks in the sys module.
 
         This has to be called after self.user_ns is created.
         """
         self._orig_sys_module_state = {}
         self._orig_sys_module_state['stdin'] = sys.stdin
         self._orig_sys_module_state['stdout'] = sys.stdout
         self._orig_sys_module_state['stderr'] = sys.stderr
         self._orig_sys_module_state['excepthook'] = sys.excepthook
         try:
             self._orig_sys_modules_main_name = self.user_ns['__name__']
         except KeyError:
             pass
 
     def restore_sys_module_state(self):
         """Restore the state of the sys module."""
         try:
             for k, v in self._orig_sys_module_state.iteritems():
                 setattr(sys, k, v)
         except AttributeError:
             pass
         # Reset what what done in self.init_sys_modules
         try:
             sys.modules[self.user_ns['__name__']] = self._orig_sys_modules_main_name
         except (AttributeError, KeyError):
             pass
 
     #-------------------------------------------------------------------------
     # Things related to hooks
     #-------------------------------------------------------------------------
 
     def init_hooks(self):
         # hooks holds pointers used for user-side customizations
         self.hooks = Struct()
 
         self.strdispatchers = {}
 
         # Set all default hooks, defined in the IPython.hooks module.
         hooks = IPython.core.hooks
         for hook_name in hooks.__all__:
             # default hooks have priority 100, i.e. low; user hooks should have
             # 0-100 priority
             self.set_hook(hook_name,getattr(hooks,hook_name), 100)
 
     def set_hook(self,name,hook, priority = 50, str_key = None, re_key = None):
         """set_hook(name,hook) -> sets an internal IPython hook.
 
         IPython exposes some of its internal API as user-modifiable hooks.  By
         adding your function to one of these hooks, you can modify IPython's
         behavior to call at runtime your own routines."""
 
         # At some point in the future, this should validate the hook before it
         # accepts it.  Probably at least check that the hook takes the number
         # of args it's supposed to.
 
         f = types.MethodType(hook,self)
 
         # check if the hook is for strdispatcher first
         if str_key is not None:
             sdp = self.strdispatchers.get(name, StrDispatch())
             sdp.add_s(str_key, f, priority )
             self.strdispatchers[name] = sdp
             return
         if re_key is not None:
             sdp = self.strdispatchers.get(name, StrDispatch())
             sdp.add_re(re.compile(re_key), f, priority )
             self.strdispatchers[name] = sdp
             return
 
         dp = getattr(self.hooks, name, None)
         if name not in IPython.core.hooks.__all__:
             print "Warning! Hook '%s' is not one of %s" % \
                   (name, IPython.core.hooks.__all__ )
         if not dp:
             dp = IPython.core.hooks.CommandChainDispatcher()
 
         try:
             dp.add(f,priority)
         except AttributeError:
             # it was not commandchain, plain old func - replace
             dp = f
 
         setattr(self.hooks,name, dp)
 
     def register_post_execute(self, func):
         """Register a function for calling after code execution.
         """
         if not callable(func):
             raise ValueError('argument %s must be callable' % func)
         self._post_execute[func] = True
 
     #-------------------------------------------------------------------------
     # Things related to the "main" module
     #-------------------------------------------------------------------------
 
     def new_main_mod(self,ns=None):
         """Return a new 'main' module object for user code execution.
         """
         main_mod = self._user_main_module
         init_fakemod_dict(main_mod,ns)
         return main_mod
 
     def cache_main_mod(self,ns,fname):
         """Cache a main module's namespace.
 
         When scripts are executed via %run, we must keep a reference to the
         namespace of their __main__ module (a FakeModule instance) around so
         that Python doesn't clear it, rendering objects defined therein
         useless.
 
         This method keeps said reference in a private dict, keyed by the
         absolute path of the module object (which corresponds to the script
         path).  This way, for multiple executions of the same script we only
         keep one copy of the namespace (the last one), thus preventing memory
         leaks from old references while allowing the objects from the last
         execution to be accessible.
 
         Note: we can not allow the actual FakeModule instances to be deleted,
         because of how Python tears down modules (it hard-sets all their
         references to None without regard for reference counts).  This method
         must therefore make a *copy* of the given namespace, to allow the
         original module's __dict__ to be cleared and reused.
 
 
         Parameters
         ----------
           ns : a namespace (a dict, typically)
 
           fname : str
             Filename associated with the namespace.
 
         Examples
         --------
 
         In [10]: import IPython
 
         In [11]: _ip.cache_main_mod(IPython.__dict__,IPython.__file__)
 
         In [12]: IPython.__file__ in _ip._main_ns_cache
         Out[12]: True
         """
         self._main_ns_cache[os.path.abspath(fname)] = ns.copy()
 
     def clear_main_mod_cache(self):
         """Clear the cache of main modules.
 
         Mainly for use by utilities like %reset.
 
         Examples
         --------
 
         In [15]: import IPython
 
         In [16]: _ip.cache_main_mod(IPython.__dict__,IPython.__file__)
 
         In [17]: len(_ip._main_ns_cache) > 0
         Out[17]: True
 
         In [18]: _ip.clear_main_mod_cache()
 
         In [19]: len(_ip._main_ns_cache) == 0
         Out[19]: True
         """
         self._main_ns_cache.clear()
 
     #-------------------------------------------------------------------------
     # Things related to debugging
     #-------------------------------------------------------------------------
 
     def init_pdb(self):
         # Set calling of pdb on exceptions
         # self.call_pdb is a property
         self.call_pdb = self.pdb
 
     def _get_call_pdb(self):
         return self._call_pdb
 
     def _set_call_pdb(self,val):
 
         if val not in (0,1,False,True):
             raise ValueError,'new call_pdb value must be boolean'
 
         # store value in instance
         self._call_pdb = val
 
         # notify the actual exception handlers
         self.InteractiveTB.call_pdb = val
 
     call_pdb = property(_get_call_pdb,_set_call_pdb,None,
                         'Control auto-activation of pdb at exceptions')
 
     def debugger(self,force=False):
         """Call the pydb/pdb debugger.
 
         Keywords:
 
           - force(False): by default, this routine checks the instance call_pdb
           flag and does not actually invoke the debugger if the flag is false.
           The 'force' option forces the debugger to activate even if the flag
           is false.
         """
 
         if not (force or self.call_pdb):
             return
 
         if not hasattr(sys,'last_traceback'):
             error('No traceback has been produced, nothing to debug.')
             return
 
         # use pydb if available
         if debugger.has_pydb:
             from pydb import pm
         else:
             # fallback to our internal debugger
             pm = lambda : self.InteractiveTB.debugger(force=True)
 
         with self.readline_no_record:
             pm()
 
     #-------------------------------------------------------------------------
     # Things related to IPython's various namespaces
     #-------------------------------------------------------------------------
 
     def init_create_namespaces(self, user_ns=None, user_global_ns=None):
         # Create the namespace where the user will operate.  user_ns is
         # normally the only one used, and it is passed to the exec calls as
         # the locals argument.  But we do carry a user_global_ns namespace
         # given as the exec 'globals' argument,  This is useful in embedding
         # situations where the ipython shell opens in a context where the
         # distinction between locals and globals is meaningful.  For
         # non-embedded contexts, it is just the same object as the user_ns dict.
 
         # FIXME. For some strange reason, __builtins__ is showing up at user
         # level as a dict instead of a module. This is a manual fix, but I
         # should really track down where the problem is coming from. Alex
         # Schmolck reported this problem first.
 
         # A useful post by Alex Martelli on this topic:
         # Re: inconsistent value from __builtins__
         # Von: Alex Martelli <[e-mail]>
         # Datum: Freitag 01 Oktober 2004 04:45:34 nachmittags/abends
         # Gruppen: comp.lang.python
 
         # Michael Hohn <[e-mail]> wrote:
         # > >>> print type(builtin_check.get_global_binding('__builtins__'))
         # > <type 'dict'>
         # > >>> print type(__builtins__)
         # > <type 'module'>
         # > Is this difference in return value intentional?
 
         # Well, it's documented that '__builtins__' can be either a dictionary
         # or a module, and it's been that way for a long time. Whether it's
         # intentional (or sensible), I don't know. In any case, the idea is
         # that if you need to access the built-in namespace directly, you
         # should start with "import __builtin__" (note, no 's') which will
         # definitely give you a module. Yeah, it's somewhat confusing:-(.
 
         # These routines return properly built dicts as needed by the rest of
         # the code, and can also be used by extension writers to generate
         # properly initialized namespaces.
         user_ns, user_global_ns = self.make_user_namespaces(user_ns,
                                                             user_global_ns)
 
         # Assign namespaces
         # This is the namespace where all normal user variables live
         self.user_ns = user_ns
         self.user_global_ns = user_global_ns
 
         # An auxiliary namespace that checks what parts of the user_ns were
         # loaded at startup, so we can list later only variables defined in
         # actual interactive use.  Since it is always a subset of user_ns, it
         # doesn't need to be separately tracked in the ns_table.
         self.user_ns_hidden = {}
 
         # A namespace to keep track of internal data structures to prevent
         # them from cluttering user-visible stuff.  Will be updated later
         self.internal_ns = {}
 
         # Now that FakeModule produces a real module, we've run into a nasty
         # problem: after script execution (via %run), the module where the user
         # code ran is deleted.  Now that this object is a true module (needed
         # so docetst and other tools work correctly), the Python module
         # teardown mechanism runs over it, and sets to None every variable
         # present in that module.  Top-level references to objects from the
         # script survive, because the user_ns is updated with them.  However,
         # calling functions defined in the script that use other things from
         # the script will fail, because the function's closure had references
         # to the original objects, which are now all None.  So we must protect
         # these modules from deletion by keeping a cache.
         #
         # To avoid keeping stale modules around (we only need the one from the
         # last run), we use a dict keyed with the full path to the script, so
         # only the last version of the module is held in the cache.  Note,
         # however, that we must cache the module *namespace contents* (their
         # __dict__).  Because if we try to cache the actual modules, old ones
         # (uncached) could be destroyed while still holding references (such as
         # those held by GUI objects that tend to be long-lived)>
         #
         # The %reset command will flush this cache.  See the cache_main_mod()
         # and clear_main_mod_cache() methods for details on use.
 
         # This is the cache used for 'main' namespaces
         self._main_ns_cache = {}
         # And this is the single instance of FakeModule whose __dict__ we keep
         # copying and clearing for reuse on each %run
         self._user_main_module = FakeModule()
 
         # A table holding all the namespaces IPython deals with, so that
         # introspection facilities can search easily.
         self.ns_table = {'user':user_ns,
                          'user_global':user_global_ns,
                          'internal':self.internal_ns,
                          'builtin':builtin_mod.__dict__
                          }
 
         # Similarly, track all namespaces where references can be held and that
         # we can safely clear (so it can NOT include builtin).  This one can be
         # a simple list.  Note that the main execution namespaces, user_ns and
         # user_global_ns, can NOT be listed here, as clearing them blindly
         # causes errors in object __del__ methods.  Instead, the reset() method
         # clears them manually and carefully.
         self.ns_refs_table = [ self.user_ns_hidden,
                                self.internal_ns, self._main_ns_cache ]
 
     def make_user_namespaces(self, user_ns=None, user_global_ns=None):
         """Return a valid local and global user interactive namespaces.
 
         This builds a dict with the minimal information needed to operate as a
         valid IPython user namespace, which you can pass to the various
         embedding classes in ipython. The default implementation returns the
         same dict for both the locals and the globals to allow functions to
         refer to variables in the namespace. Customized implementations can
         return different dicts. The locals dictionary can actually be anything
         following the basic mapping protocol of a dict, but the globals dict
         must be a true dict, not even a subclass. It is recommended that any
         custom object for the locals namespace synchronize with the globals
         dict somehow.
 
         Raises TypeError if the provided globals namespace is not a true dict.
 
         Parameters
         ----------
         user_ns : dict-like, optional
             The current user namespace. The items in this namespace should
             be included in the output. If None, an appropriate blank
             namespace should be created.
         user_global_ns : dict, optional
             The current user global namespace. The items in this namespace
             should be included in the output. If None, an appropriate
             blank namespace should be created.
 
         Returns
         -------
             A pair of dictionary-like object to be used as the local namespace
             of the interpreter and a dict to be used as the global namespace.
         """
 
 
         # We must ensure that __builtin__ (without the final 's') is always
         # available and pointing to the __builtin__ *module*.  For more details:
         # http://mail.python.org/pipermail/python-dev/2001-April/014068.html
 
         if user_ns is None:
             # Set __name__ to __main__ to better match the behavior of the
             # normal interpreter.
             user_ns = {'__name__'     :'__main__',
                        py3compat.builtin_mod_name: builtin_mod,
                        '__builtins__' : builtin_mod,
                       }
         else:
             user_ns.setdefault('__name__','__main__')
             user_ns.setdefault(py3compat.builtin_mod_name,builtin_mod)
             user_ns.setdefault('__builtins__',builtin_mod)
 
         if user_global_ns is None:
             user_global_ns = user_ns
         if type(user_global_ns) is not dict:
             raise TypeError("user_global_ns must be a true dict; got %r"
                 % type(user_global_ns))
 
         return user_ns, user_global_ns
 
     def init_sys_modules(self):
         # We need to insert into sys.modules something that looks like a
         # module but which accesses the IPython namespace, for shelve and
         # pickle to work interactively. Normally they rely on getting
         # everything out of __main__, but for embedding purposes each IPython
         # instance has its own private namespace, so we can't go shoving
         # everything into __main__.
 
         # note, however, that we should only do this for non-embedded
         # ipythons, which really mimic the __main__.__dict__ with their own
         # namespace.  Embedded instances, on the other hand, should not do
         # this because they need to manage the user local/global namespaces
         # only, but they live within a 'normal' __main__ (meaning, they
         # shouldn't overtake the execution environment of the script they're
         # embedded in).
 
         # This is overridden in the InteractiveShellEmbed subclass to a no-op.
 
         try:
             main_name = self.user_ns['__name__']
         except KeyError:
             raise KeyError('user_ns dictionary MUST have a "__name__" key')
         else:
             sys.modules[main_name] = FakeModule(self.user_ns)
 
     def init_user_ns(self):
         """Initialize all user-visible namespaces to their minimum defaults.
 
         Certain history lists are also initialized here, as they effectively
         act as user namespaces.
 
         Notes
         -----
         All data structures here are only filled in, they are NOT reset by this
         method.  If they were not empty before, data will simply be added to
         therm.
         """
         # This function works in two parts: first we put a few things in
         # user_ns, and we sync that contents into user_ns_hidden so that these
         # initial variables aren't shown by %who.  After the sync, we add the
         # rest of what we *do* want the user to see with %who even on a new
         # session (probably nothing, so theye really only see their own stuff)
 
         # The user dict must *always* have a __builtin__ reference to the
         # Python standard __builtin__ namespace,  which must be imported.
         # This is so that certain operations in prompt evaluation can be
         # reliably executed with builtins.  Note that we can NOT use
         # __builtins__ (note the 's'),  because that can either be a dict or a
         # module, and can even mutate at runtime, depending on the context
         # (Python makes no guarantees on it).  In contrast, __builtin__ is
         # always a module object, though it must be explicitly imported.
 
         # For more details:
         # http://mail.python.org/pipermail/python-dev/2001-April/014068.html
         ns = dict(__builtin__ = builtin_mod)
 
         # Put 'help' in the user namespace
         try:
             from site import _Helper
             ns['help'] = _Helper()
         except ImportError:
             warn('help() not available - check site.py')
 
         # make global variables for user access to the histories
         ns['_ih'] = self.history_manager.input_hist_parsed
         ns['_oh'] = self.history_manager.output_hist
         ns['_dh'] = self.history_manager.dir_hist
 
         ns['_sh'] = shadowns
 
         # user aliases to input and output histories.  These shouldn't show up
         # in %who, as they can have very large reprs.
         ns['In']  = self.history_manager.input_hist_parsed
         ns['Out'] = self.history_manager.output_hist
 
         # Store myself as the public api!!!
         ns['get_ipython'] = self.get_ipython
 
         ns['exit'] = self.exiter
         ns['quit'] = self.exiter
 
         # Sync what we've added so far to user_ns_hidden so these aren't seen
         # by %who
         self.user_ns_hidden.update(ns)
 
         # Anything put into ns now would show up in %who.  Think twice before
         # putting anything here, as we really want %who to show the user their
         # stuff, not our variables.
 
         # Finally, update the real user's namespace
         self.user_ns.update(ns)
 
     def reset(self, new_session=True):
         """Clear all internal namespaces, and attempt to release references to
         user objects.
 
         If new_session is True, a new history session will be opened.
         """
         # Clear histories
         self.history_manager.reset(new_session)
         # Reset counter used to index all histories
         if new_session:
             self.execution_count = 1
 
         # Flush cached output items
         if self.displayhook.do_full_cache:
             self.displayhook.flush()
 
         # Restore the user namespaces to minimal usability
         for ns in self.ns_refs_table:
             ns.clear()
 
         # The main execution namespaces must be cleared very carefully,
         # skipping the deletion of the builtin-related keys, because doing so
         # would cause errors in many object's __del__ methods.
         for ns in [self.user_ns, self.user_global_ns]:
             drop_keys = set(ns.keys())
             drop_keys.discard('__builtin__')
             drop_keys.discard('__builtins__')
             for k in drop_keys:
                 del ns[k]
 
         # Restore the user namespaces to minimal usability
         self.init_user_ns()
 
         # Restore the default and user aliases
         self.alias_manager.clear_aliases()
         self.alias_manager.init_aliases()
 
         # Flush the private list of module references kept for script
         # execution protection
         self.clear_main_mod_cache()
 
         # Clear out the namespace from the last %run
         self.new_main_mod()
 
     def del_var(self, varname, by_name=False):
         """Delete a variable from the various namespaces, so that, as
         far as possible, we're not keeping any hidden references to it.
 
         Parameters
         ----------
         varname : str
             The name of the variable to delete.
         by_name : bool
             If True, delete variables with the given name in each
             namespace. If False (default), find the variable in the user
             namespace, and delete references to it.
         """
         if varname in ('__builtin__', '__builtins__'):
             raise ValueError("Refusing to delete %s" % varname)
         ns_refs = self.ns_refs_table + [self.user_ns,
                 self.user_global_ns, self._user_main_module.__dict__] +\
                 self._main_ns_cache.values()
 
         if by_name:                    # Delete by name
             for ns in ns_refs:
                 try:
                     del ns[varname]
                 except KeyError:
                     pass
         else:                         # Delete by object
             try:
                 obj = self.user_ns[varname]
             except KeyError:
                 raise NameError("name '%s' is not defined" % varname)
             # Also check in output history
             ns_refs.append(self.history_manager.output_hist)
             for ns in ns_refs:
                 to_delete = [n for n, o in ns.iteritems() if o is obj]
                 for name in to_delete:
                     del ns[name]
 
             # displayhook keeps extra references, but not in a dictionary
             for name in ('_', '__', '___'):
                 if getattr(self.displayhook, name) is obj:
                     setattr(self.displayhook, name, None)
 
     def reset_selective(self, regex=None):
         """Clear selective variables from internal namespaces based on a
         specified regular expression.
 
         Parameters
         ----------
         regex : string or compiled pattern, optional
             A regular expression pattern that will be used in searching
             variable names in the users namespaces.
         """
         if regex is not None:
             try:
                 m = re.compile(regex)
             except TypeError:
                 raise TypeError('regex must be a string or compiled pattern')
             # Search for keys in each namespace that match the given regex
             # If a match is found, delete the key/value pair.
             for ns in self.ns_refs_table:
                 for var in ns:
                     if m.search(var):
                         del ns[var]
 
     def push(self, variables, interactive=True):
         """Inject a group of variables into the IPython user namespace.
 
         Parameters
         ----------
         variables : dict, str or list/tuple of str
             The variables to inject into the user's namespace.  If a dict, a
             simple update is done.  If a str, the string is assumed to have
             variable names separated by spaces.  A list/tuple of str can also
             be used to give the variable names.  If just the variable names are
             give (list/tuple/str) then the variable values looked up in the
             callers frame.
         interactive : bool
             If True (default), the variables will be listed with the ``who``
             magic.
         """
         vdict = None
 
         # We need a dict of name/value pairs to do namespace updates.
         if isinstance(variables, dict):
             vdict = variables
         elif isinstance(variables, (basestring, list, tuple)):
             if isinstance(variables, basestring):
                 vlist = variables.split()
             else:
                 vlist = variables
             vdict = {}
             cf = sys._getframe(1)
             for name in vlist:
                 try:
                     vdict[name] = eval(name, cf.f_globals, cf.f_locals)
                 except:
                     print ('Could not get variable %s from %s' %
                            (name,cf.f_code.co_name))
         else:
             raise ValueError('variables must be a dict/str/list/tuple')
 
         # Propagate variables to user namespace
         self.user_ns.update(vdict)
 
         # And configure interactive visibility
         config_ns = self.user_ns_hidden
         if interactive:
             for name, val in vdict.iteritems():
                 config_ns.pop(name, None)
         else:
             for name,val in vdict.iteritems():
                 config_ns[name] = val
     
     def drop_by_id(self, variables):
         """Remove a dict of variables from the user namespace, if they are the
         same as the values in the dictionary.
         
         This is intended for use by extensions: variables that they've added can
         be taken back out if they are unloaded, without removing any that the
         user has overwritten.
         
         Parameters
         ----------
         variables : dict
           A dictionary mapping object names (as strings) to the objects.
         """
         for name, obj in variables.iteritems():
             if name in self.user_ns and self.user_ns[name] is obj:
                 del self.user_ns[name]
                 self.user_ns_hidden.pop(name, None)
 
     #-------------------------------------------------------------------------
     # Things related to object introspection
     #-------------------------------------------------------------------------
 
     def _ofind(self, oname, namespaces=None):
         """Find an object in the available namespaces.
 
         self._ofind(oname) -> dict with keys: found,obj,ospace,ismagic
 
         Has special code to detect magic functions.
         """
         oname = oname.strip()
         #print '1- oname: <%r>' % oname  # dbg
         if not py3compat.isidentifier(oname.lstrip(ESC_MAGIC), dotted=True):
             return dict(found=False)
 
         alias_ns = None
         if namespaces is None:
             # Namespaces to search in:
             # Put them in a list. The order is important so that we
             # find things in the same order that Python finds them.
             namespaces = [ ('Interactive', self.user_ns),
                            ('IPython internal', self.internal_ns),
                            ('Python builtin', builtin_mod.__dict__),
                            ('Alias', self.alias_manager.alias_table),
                            ]
             alias_ns = self.alias_manager.alias_table
 
         # initialize results to 'null'
         found = False; obj = None;  ospace = None;  ds = None;
         ismagic = False; isalias = False; parent = None
 
         # We need to special-case 'print', which as of python2.6 registers as a
         # function but should only be treated as one if print_function was
         # loaded with a future import.  In this case, just bail.
         if (oname == 'print' and not py3compat.PY3 and not \
             (self.compile.compiler_flags & __future__.CO_FUTURE_PRINT_FUNCTION)):
             return {'found':found, 'obj':obj, 'namespace':ospace,
                     'ismagic':ismagic, 'isalias':isalias, 'parent':parent}
 
         # Look for the given name by splitting it in parts.  If the head is
         # found, then we look for all the remaining parts as members, and only
         # declare success if we can find them all.
         oname_parts = oname.split('.')
         oname_head, oname_rest = oname_parts[0],oname_parts[1:]
         for nsname,ns in namespaces:
             try:
                 obj = ns[oname_head]
             except KeyError:
                 continue
             else:
                 #print 'oname_rest:', oname_rest  # dbg
                 for part in oname_rest:
                     try:
                         parent = obj
                         obj = getattr(obj,part)
                     except:
                         # Blanket except b/c some badly implemented objects
                         # allow __getattr__ to raise exceptions other than
                         # AttributeError, which then crashes IPython.
                         break
                 else:
                     # If we finish the for loop (no break), we got all members
                     found = True
                     ospace = nsname
                     if ns == alias_ns:
                         isalias = True
                     break  # namespace loop
 
         # Try to see if it's magic
         if not found:
             if oname.startswith(ESC_MAGIC):
                 oname = oname[1:]
             obj = getattr(self,'magic_'+oname,None)
             if obj is not None:
                 found = True
                 ospace = 'IPython internal'
                 ismagic = True
 
         # Last try: special-case some literals like '', [], {}, etc:
         if not found and oname_head in ["''",'""','[]','{}','()']:
             obj = eval(oname_head)
             found = True
             ospace = 'Interactive'
 
         return {'found':found, 'obj':obj, 'namespace':ospace,
                 'ismagic':ismagic, 'isalias':isalias, 'parent':parent}
 
     def _ofind_property(self, oname, info):
         """Second part of object finding, to look for property details."""
         if info.found:
             # Get the docstring of the class property if it exists.
             path = oname.split('.')
             root = '.'.join(path[:-1])
             if info.parent is not None:
                 try:
                     target = getattr(info.parent, '__class__')
                     # The object belongs to a class instance.
                     try:
                         target = getattr(target, path[-1])
                         # The class defines the object.
                         if isinstance(target, property):
                             oname = root + '.__class__.' + path[-1]
                             info = Struct(self._ofind(oname))
                     except AttributeError: pass
                 except AttributeError: pass
 
         # We return either the new info or the unmodified input if the object
         # hadn't been found
         return info
 
     def _object_find(self, oname, namespaces=None):
         """Find an object and return a struct with info about it."""
         inf = Struct(self._ofind(oname, namespaces))
         return Struct(self._ofind_property(oname, inf))
 
     def _inspect(self, meth, oname, namespaces=None, **kw):
         """Generic interface to the inspector system.
 
         This function is meant to be called by pdef, pdoc & friends."""
         info = self._object_find(oname)
         if info.found:
             pmethod = getattr(self.inspector, meth)
             formatter = format_screen if info.ismagic else None
             if meth == 'pdoc':
                 pmethod(info.obj, oname, formatter)
             elif meth == 'pinfo':
                 pmethod(info.obj, oname, formatter, info, **kw)
             else:
                 pmethod(info.obj, oname)
         else:
             print 'Object `%s` not found.' % oname
             return 'not found'  # so callers can take other action
 
     def object_inspect(self, oname):
         with self.builtin_trap:
             info = self._object_find(oname)
             if info.found:
                 return self.inspector.info(info.obj, oname, info=info)
             else:
                 return oinspect.object_info(name=oname, found=False)
 
     #-------------------------------------------------------------------------
     # Things related to history management
     #-------------------------------------------------------------------------
 
     def init_history(self):
         """Sets up the command history, and starts regular autosaves."""
         self.history_manager = HistoryManager(shell=self, config=self.config)
         self.configurables.append(self.history_manager)
 
     #-------------------------------------------------------------------------
     # Things related to exception handling and tracebacks (not debugging)
     #-------------------------------------------------------------------------
 
     def init_traceback_handlers(self, custom_exceptions):
         # Syntax error handler.
         self.SyntaxTB = ultratb.SyntaxTB(color_scheme='NoColor')
 
         # The interactive one is initialized with an offset, meaning we always
         # want to remove the topmost item in the traceback, which is our own
         # internal code. Valid modes: ['Plain','Context','Verbose']
         self.InteractiveTB = ultratb.AutoFormattedTB(mode = 'Plain',
                                                      color_scheme='NoColor',
                                                      tb_offset = 1,
                                    check_cache=self.compile.check_cache)
 
         # The instance will store a pointer to the system-wide exception hook,
         # so that runtime code (such as magics) can access it.  This is because
         # during the read-eval loop, it may get temporarily overwritten.
         self.sys_excepthook = sys.excepthook
 
         # and add any custom exception handlers the user may have specified
         self.set_custom_exc(*custom_exceptions)
 
         # Set the exception mode
         self.InteractiveTB.set_mode(mode=self.xmode)
 
     def set_custom_exc(self, exc_tuple, handler):
         """set_custom_exc(exc_tuple,handler)
 
         Set a custom exception handler, which will be called if any of the
         exceptions in exc_tuple occur in the mainloop (specifically, in the
         run_code() method).
 
         Parameters
         ----------
 
         exc_tuple : tuple of exception classes
             A *tuple* of exception classes, for which to call the defined
             handler.  It is very important that you use a tuple, and NOT A
             LIST here, because of the way Python's except statement works.  If
             you only want to trap a single exception, use a singleton tuple::
 
                 exc_tuple == (MyCustomException,)
 
         handler : callable
             handler must have the following signature::
 
                 def my_handler(self, etype, value, tb, tb_offset=None):
                     ...
                     return structured_traceback
 
             Your handler must return a structured traceback (a list of strings),
             or None.
 
             This will be made into an instance method (via types.MethodType)
             of IPython itself, and it will be called if any of the exceptions
             listed in the exc_tuple are caught. If the handler is None, an
             internal basic one is used, which just prints basic info.
 
             To protect IPython from crashes, if your handler ever raises an
             exception or returns an invalid result, it will be immediately
             disabled.
 
         WARNING: by putting in your own exception handler into IPython's main
         execution loop, you run a very good chance of nasty crashes.  This
         facility should only be used if you really know what you are doing."""
 
         assert type(exc_tuple)==type(()) , \
                "The custom exceptions must be given AS A TUPLE."
 
         def dummy_handler(self,etype,value,tb,tb_offset=None):
             print '*** Simple custom exception handler ***'
             print 'Exception type :',etype
             print 'Exception value:',value
             print 'Traceback      :',tb
             #print 'Source code    :','\n'.join(self.buffer)
         
         def validate_stb(stb):
             """validate structured traceback return type
             
             return type of CustomTB *should* be a list of strings, but allow
             single strings or None, which are harmless.
             
             This function will *always* return a list of strings,
             and will raise a TypeError if stb is inappropriate.
             """
             msg = "CustomTB must return list of strings, not %r" % stb
             if stb is None:
                 return []
             elif isinstance(stb, basestring):
                 return [stb]
             elif not isinstance(stb, list):
                 raise TypeError(msg)
             # it's a list
             for line in stb:
                 # check every element
                 if not isinstance(line, basestring):
                     raise TypeError(msg)
             return stb
 
         if handler is None:
             wrapped = dummy_handler
         else:
             def wrapped(self,etype,value,tb,tb_offset=None):
                 """wrap CustomTB handler, to protect IPython from user code
                 
                 This makes it harder (but not impossible) for custom exception
                 handlers to crash IPython.
                 """
                 try:
                     stb = handler(self,etype,value,tb,tb_offset=tb_offset)
                     return validate_stb(stb)
                 except:
                     # clear custom handler immediately
                     self.set_custom_exc((), None)
                     print >> io.stderr, "Custom TB Handler failed, unregistering"
                     # show the exception in handler first
                     stb = self.InteractiveTB.structured_traceback(*sys.exc_info())
                     print >> io.stdout, self.InteractiveTB.stb2text(stb)
                     print >> io.stdout, "The original exception:"
                     stb = self.InteractiveTB.structured_traceback(
                                             (etype,value,tb), tb_offset=tb_offset
                     )
                 return stb
 
         self.CustomTB = types.MethodType(wrapped,self)
         self.custom_exceptions = exc_tuple
 
     def excepthook(self, etype, value, tb):
       """One more defense for GUI apps that call sys.excepthook.
 
       GUI frameworks like wxPython trap exceptions and call
       sys.excepthook themselves.  I guess this is a feature that
       enables them to keep running after exceptions that would
       otherwise kill their mainloop. This is a bother for IPython
       which excepts to catch all of the program exceptions with a try:
       except: statement.
 
       Normally, IPython sets sys.excepthook to a CrashHandler instance, so if
       any app directly invokes sys.excepthook, it will look to the user like
       IPython crashed.  In order to work around this, we can disable the
       CrashHandler and replace it with this excepthook instead, which prints a
       regular traceback using our InteractiveTB.  In this fashion, apps which
       call sys.excepthook will generate a regular-looking exception from
       IPython, and the CrashHandler will only be triggered by real IPython
       crashes.
 
       This hook should be used sparingly, only in places which are not likely
       to be true IPython errors.
       """
       self.showtraceback((etype,value,tb),tb_offset=0)
 
     def showtraceback(self,exc_tuple = None,filename=None,tb_offset=None,
                       exception_only=False):
         """Display the exception that just occurred.
 
         If nothing is known about the exception, this is the method which
         should be used throughout the code for presenting user tracebacks,
         rather than directly invoking the InteractiveTB object.
 
         A specific showsyntaxerror() also exists, but this method can take
         care of calling it if needed, so unless you are explicitly catching a
         SyntaxError exception, don't try to analyze the stack manually and
         simply call this method."""
 
         try:
             if exc_tuple is None:
                 etype, value, tb = sys.exc_info()
             else:
                 etype, value, tb = exc_tuple
 
             if etype is None:
                 if hasattr(sys, 'last_type'):
                     etype, value, tb = sys.last_type, sys.last_value, \
                                        sys.last_traceback
                 else:
                     self.write_err('No traceback available to show.\n')
                     return
 
             if etype is SyntaxError:
                 # Though this won't be called by syntax errors in the input
                 # line, there may be SyntaxError cases with imported code.
                 self.showsyntaxerror(filename)
             elif etype is UsageError:
                 self.write_err("UsageError: %s" % value)
             else:
                 # WARNING: these variables are somewhat deprecated and not
                 # necessarily safe to use in a threaded environment, but tools
                 # like pdb depend on their existence, so let's set them.  If we
                 # find problems in the field, we'll need to revisit their use.
                 sys.last_type = etype
                 sys.last_value = value
                 sys.last_traceback = tb
                 if etype in self.custom_exceptions:
                     stb = self.CustomTB(etype, value, tb, tb_offset)
                 else:
                     if exception_only:
                         stb = ['An exception has occurred, use %tb to see '
                                'the full traceback.\n']
                         stb.extend(self.InteractiveTB.get_exception_only(etype,
                                                                          value))
                     else:
                         stb = self.InteractiveTB.structured_traceback(etype,
                                                 value, tb, tb_offset=tb_offset)
 
                         self._showtraceback(etype, value, stb)
                         if self.call_pdb:
                             # drop into debugger
                             self.debugger(force=True)
                         return
 
                 # Actually show the traceback
                 self._showtraceback(etype, value, stb)
 
         except KeyboardInterrupt:
             self.write_err("\nKeyboardInterrupt\n")
 
     def _showtraceback(self, etype, evalue, stb):
         """Actually show a traceback.
 
         Subclasses may override this method to put the traceback on a different
         place, like a side channel.
         """
         print >> io.stdout, self.InteractiveTB.stb2text(stb)
 
     def showsyntaxerror(self, filename=None):
         """Display the syntax error that just occurred.
 
         This doesn't display a stack trace because there isn't one.
 
         If a filename is given, it is stuffed in the exception instead
         of what was there before (because Python's parser always uses
         "<string>" when reading from a string).
         """
         etype, value, last_traceback = sys.exc_info()
 
         # See note about these variables in showtraceback() above
         sys.last_type = etype
         sys.last_value = value
         sys.last_traceback = last_traceback
 
         if filename and etype is SyntaxError:
             # Work hard to stuff the correct filename in the exception
             try:
                 msg, (dummy_filename, lineno, offset, line) = value
             except:
                 # Not the format we expect; leave it alone
                 pass
             else:
                 # Stuff in the right filename
                 try:
                     # Assume SyntaxError is a class exception
                     value = SyntaxError(msg, (filename, lineno, offset, line))
                 except:
                     # If that failed, assume SyntaxError is a string
                     value = msg, (filename, lineno, offset, line)
         stb = self.SyntaxTB.structured_traceback(etype, value, [])
         self._showtraceback(etype, value, stb)
 
     # This is overridden in TerminalInteractiveShell to show a message about
     # the %paste magic.
     def showindentationerror(self):
         """Called by run_cell when there's an IndentationError in code entered
         at the prompt.
 
         This is overridden in TerminalInteractiveShell to show a message about
         the %paste magic."""
         self.showsyntaxerror()
 
     #-------------------------------------------------------------------------
     # Things related to readline
     #-------------------------------------------------------------------------
 
     def init_readline(self):
         """Command history completion/saving/reloading."""
 
         if self.readline_use:
             import IPython.utils.rlineimpl as readline
 
         self.rl_next_input = None
         self.rl_do_indent = False
 
         if not self.readline_use or not readline.have_readline:
             self.has_readline = False
             self.readline = None
             # Set a number of methods that depend on readline to be no-op
             self.readline_no_record = no_op_context
             self.set_readline_completer = no_op
             self.set_custom_completer = no_op
             self.set_completer_frame = no_op
             if self.readline_use:
                 warn('Readline services not available or not loaded.')
         else:
             self.has_readline = True
             self.readline = readline
             sys.modules['readline'] = readline
 
             # Platform-specific configuration
             if os.name == 'nt':
                 # FIXME - check with Frederick to see if we can harmonize
                 # naming conventions with pyreadline to avoid this
                 # platform-dependent check
                 self.readline_startup_hook = readline.set_pre_input_hook
             else:
                 self.readline_startup_hook = readline.set_startup_hook
 
             # Load user's initrc file (readline config)
             # Or if libedit is used, load editrc.
             inputrc_name = os.environ.get('INPUTRC')
             if inputrc_name is None:
-                home_dir = get_home_dir()
-                if home_dir is not None:
-                    inputrc_name = '.inputrc'
-                    if readline.uses_libedit:
-                        inputrc_name = '.editrc'
-                    inputrc_name = os.path.join(home_dir, inputrc_name)
+                inputrc_name = '.inputrc'
+                if readline.uses_libedit:
+                    inputrc_name = '.editrc'
+                inputrc_name = os.path.join(self.home_dir, inputrc_name)
             if os.path.isfile(inputrc_name):
                 try:
                     readline.read_init_file(inputrc_name)
                 except:
                     warn('Problems reading readline initialization file <%s>'
                          % inputrc_name)
 
             # Configure readline according to user's prefs
             # This is only done if GNU readline is being used.  If libedit
             # is being used (as on Leopard) the readline config is
             # not run as the syntax for libedit is different.
             if not readline.uses_libedit:
                 for rlcommand in self.readline_parse_and_bind:
                     #print "loading rl:",rlcommand  # dbg
                     readline.parse_and_bind(rlcommand)
 
             # Remove some chars from the delimiters list.  If we encounter
             # unicode chars, discard them.
             delims = readline.get_completer_delims()
             if not py3compat.PY3:
                 delims = delims.encode("ascii", "ignore")
             for d in self.readline_remove_delims:
                 delims = delims.replace(d, "")
             delims = delims.replace(ESC_MAGIC, '')
             readline.set_completer_delims(delims)
             # otherwise we end up with a monster history after a while:
             readline.set_history_length(self.history_length)
 
             self.refill_readline_hist()
             self.readline_no_record = ReadlineNoRecord(self)
 
         # Configure auto-indent for all platforms
         self.set_autoindent(self.autoindent)
 
     def refill_readline_hist(self):
         # Load the last 1000 lines from history
         self.readline.clear_history()
         stdin_encoding = sys.stdin.encoding or "utf-8"
         last_cell = u""
         for _, _, cell in self.history_manager.get_tail(1000,
                                                         include_latest=True):
             # Ignore blank lines and consecutive duplicates
             cell = cell.rstrip()
             if cell and (cell != last_cell):
                 if self.multiline_history:
                       self.readline.add_history(py3compat.unicode_to_str(cell,
                                                                 stdin_encoding))
                 else:
                     for line in cell.splitlines():
                         self.readline.add_history(py3compat.unicode_to_str(line,
                                                                 stdin_encoding))
                 last_cell = cell
 
     def set_next_input(self, s):
         """ Sets the 'default' input string for the next command line.
 
         Requires readline.
 
         Example:
 
         [D:\ipython]|1> _ip.set_next_input("Hello Word")
         [D:\ipython]|2> Hello Word_  # cursor is here
         """
         self.rl_next_input = py3compat.cast_bytes_py2(s)
 
     # Maybe move this to the terminal subclass?
     def pre_readline(self):
         """readline hook to be used at the start of each line.
 
         Currently it handles auto-indent only."""
 
         if self.rl_do_indent:
             self.readline.insert_text(self._indent_current_str())
         if self.rl_next_input is not None:
             self.readline.insert_text(self.rl_next_input)
             self.rl_next_input = None
 
     def _indent_current_str(self):
         """return the current level of indentation as a string"""
         return self.input_splitter.indent_spaces * ' '
 
     #-------------------------------------------------------------------------
     # Things related to text completion
     #-------------------------------------------------------------------------
 
     def init_completer(self):
         """Initialize the completion machinery.
 
         This creates completion machinery that can be used by client code,
         either interactively in-process (typically triggered by the readline
         library), programatically (such as in test suites) or out-of-prcess
         (typically over the network by remote frontends).
         """
         from IPython.core.completer import IPCompleter
         from IPython.core.completerlib import (module_completer,
                                                magic_run_completer, cd_completer)
 
         self.Completer = IPCompleter(shell=self,
                                      namespace=self.user_ns,
                                      global_namespace=self.user_global_ns,
                                      alias_table=self.alias_manager.alias_table,
                                      use_readline=self.has_readline,
                                      config=self.config,
                                      )
         self.configurables.append(self.Completer)
 
         # Add custom completers to the basic ones built into IPCompleter
         sdisp = self.strdispatchers.get('complete_command', StrDispatch())
         self.strdispatchers['complete_command'] = sdisp
         self.Completer.custom_completers = sdisp
 
         self.set_hook('complete_command', module_completer, str_key = 'import')
         self.set_hook('complete_command', module_completer, str_key = 'from')
         self.set_hook('complete_command', magic_run_completer, str_key = '%run')
         self.set_hook('complete_command', cd_completer, str_key = '%cd')
 
         # Only configure readline if we truly are using readline.  IPython can
         # do tab-completion over the network, in GUIs, etc, where readline
         # itself may be absent
         if self.has_readline:
             self.set_readline_completer()
 
     def complete(self, text, line=None, cursor_pos=None):
         """Return the completed text and a list of completions.
 
         Parameters
         ----------
 
            text : string
              A string of text to be completed on.  It can be given as empty and
              instead a line/position pair are given.  In this case, the
              completer itself will split the line like readline does.
 
            line : string, optional
              The complete line that text is part of.
 
            cursor_pos : int, optional
              The position of the cursor on the input line.
 
         Returns
         -------
           text : string
             The actual text that was completed.
 
           matches : list
             A sorted list with all possible completions.
 
         The optional arguments allow the completion to take more context into
         account, and are part of the low-level completion API.
 
         This is a wrapper around the completion mechanism, similar to what
         readline does at the command line when the TAB key is hit.  By
         exposing it as a method, it can be used by other non-readline
         environments (such as GUIs) for text completion.
 
         Simple usage example:
 
         In [1]: x = 'hello'
 
         In [2]: _ip.complete('x.l')
         Out[2]: ('x.l', ['x.ljust', 'x.lower', 'x.lstrip'])
         """
 
         # Inject names into __builtin__ so we can complete on the added names.
         with self.builtin_trap:
             return self.Completer.complete(text, line, cursor_pos)
 
     def set_custom_completer(self, completer, pos=0):
         """Adds a new custom completer function.
 
         The position argument (defaults to 0) is the index in the completers
         list where you want the completer to be inserted."""
 
         newcomp = types.MethodType(completer,self.Completer)
         self.Completer.matchers.insert(pos,newcomp)
 
     def set_readline_completer(self):
         """Reset readline's completer to be our own."""
         self.readline.set_completer(self.Completer.rlcomplete)
 
     def set_completer_frame(self, frame=None):
         """Set the frame of the completer."""
         if frame:
             self.Completer.namespace = frame.f_locals
             self.Completer.global_namespace = frame.f_globals
         else:
             self.Completer.namespace = self.user_ns
             self.Completer.global_namespace = self.user_global_ns
 
     #-------------------------------------------------------------------------
     # Things related to magics
     #-------------------------------------------------------------------------
 
     def init_magics(self):
         # FIXME: Move the color initialization to the DisplayHook, which
         # should be split into a prompt manager and displayhook. We probably
         # even need a centralize colors management object.
         self.magic_colors(self.colors)
         # History was moved to a separate module
         from . import history
         history.init_ipython(self)
 
     def magic(self, arg_s, next_input=None):
         """Call a magic function by name.
 
         Input: a string containing the name of the magic function to call and
         any additional arguments to be passed to the magic.
 
         magic('name -opt foo bar') is equivalent to typing at the ipython
         prompt:
 
         In[1]: %name -opt foo bar
 
         To call a magic without arguments, simply use magic('name').
 
         This provides a proper Python function to call IPython's magics in any
         valid Python code you can type at the interpreter, including loops and
         compound statements.
         """
         # Allow setting the next input - this is used if the user does `a=abs?`.
         # We do this first so that magic functions can override it.
         if next_input:
             self.set_next_input(next_input)
 
         args = arg_s.split(' ',1)
         magic_name = args[0]
         magic_name = magic_name.lstrip(prefilter.ESC_MAGIC)
 
         try:
             magic_args = args[1]
         except IndexError:
             magic_args = ''
         fn = getattr(self,'magic_'+magic_name,None)
         if fn is None:
             error("Magic function `%s` not found." % magic_name)
         else:
             magic_args = self.var_expand(magic_args,1)
             # Grab local namespace if we need it:
             if getattr(fn, "needs_local_scope", False):
                 self._magic_locals = sys._getframe(1).f_locals
             with self.builtin_trap:
                 result = fn(magic_args)
             # Ensure we're not keeping object references around:
             self._magic_locals = {}
             return result
 
     def define_magic(self, magicname, func):
         """Expose own function as magic function for ipython
 
         def foo_impl(self,parameter_s=''):
             'My very own magic!. (Use docstrings, IPython reads them).'
             print 'Magic function. Passed parameter is between < >:'
             print '<%s>' % parameter_s
             print 'The self object is:',self
 
         self.define_magic('foo',foo_impl)
         """
         im = types.MethodType(func,self)
         old = getattr(self, "magic_" + magicname, None)
         setattr(self, "magic_" + magicname, im)
         return old
 
     #-------------------------------------------------------------------------
     # Things related to macros
     #-------------------------------------------------------------------------
 
     def define_macro(self, name, themacro):
         """Define a new macro
 
         Parameters
         ----------
         name : str
             The name of the macro.
         themacro : str or Macro
             The action to do upon invoking the macro.  If a string, a new
             Macro object is created by passing the string to it.
         """
 
         from IPython.core import macro
 
         if isinstance(themacro, basestring):
             themacro = macro.Macro(themacro)
         if not isinstance(themacro, macro.Macro):
             raise ValueError('A macro must be a string or a Macro instance.')
         self.user_ns[name] = themacro
 
     #-------------------------------------------------------------------------
     # Things related to the running of system commands
     #-------------------------------------------------------------------------
 
     def system_piped(self, cmd):
         """Call the given cmd in a subprocess, piping stdout/err
 
         Parameters
         ----------
         cmd : str
           Command to execute (can not end in '&', as background processes are
           not supported.  Should not be a command that expects input
           other than simple text.
         """
         if cmd.rstrip().endswith('&'):
             # this is *far* from a rigorous test
             # We do not support backgrounding processes because we either use
             # pexpect or pipes to read from.  Users can always just call
             # os.system() or use ip.system=ip.system_raw
             # if they really want a background process.
             raise OSError("Background processes not supported.")
 
         # we explicitly do NOT return the subprocess status code, because
         # a non-None value would trigger :func:`sys.displayhook` calls.
         # Instead, we store the exit_code in user_ns.
         self.user_ns['_exit_code'] = system(self.var_expand(cmd, depth=2))
 
     def system_raw(self, cmd):
         """Call the given cmd in a subprocess using os.system
 
         Parameters
         ----------
         cmd : str
           Command to execute.
         """
         cmd = self.var_expand(cmd, depth=2)
         # protect os.system from UNC paths on Windows, which it can't handle:
         if sys.platform == 'win32':
             from IPython.utils._process_win32 import AvoidUNCPath
             with AvoidUNCPath() as path:
                 if path is not None:
                     cmd = '"pushd %s &&"%s' % (path, cmd)
                 cmd = py3compat.unicode_to_str(cmd)
                 ec = os.system(cmd)
         else:
             cmd = py3compat.unicode_to_str(cmd)
             ec = os.system(cmd)
         
         # We explicitly do NOT return the subprocess status code, because
         # a non-None value would trigger :func:`sys.displayhook` calls.
         # Instead, we store the exit_code in user_ns.
         self.user_ns['_exit_code'] = ec
 
     # use piped system by default, because it is better behaved
     system = system_piped
 
     def getoutput(self, cmd, split=True):
         """Get output (possibly including stderr) from a subprocess.
 
         Parameters
         ----------
         cmd : str
           Command to execute (can not end in '&', as background processes are
           not supported.
         split : bool, optional
 
           If True, split the output into an IPython SList.  Otherwise, an
           IPython LSString is returned.  These are objects similar to normal
           lists and strings, with a few convenience attributes for easier
           manipulation of line-based output.  You can use '?' on them for
           details.
           """
         if cmd.rstrip().endswith('&'):
             # this is *far* from a rigorous test
             raise OSError("Background processes not supported.")
         out = getoutput(self.var_expand(cmd, depth=2))
         if split:
             out = SList(out.splitlines())
         else:
             out = LSString(out)
         return out
 
     #-------------------------------------------------------------------------
     # Things related to aliases
     #-------------------------------------------------------------------------
 
     def init_alias(self):
         self.alias_manager = AliasManager(shell=self, config=self.config)
         self.configurables.append(self.alias_manager)
         self.ns_table['alias'] = self.alias_manager.alias_table,
 
     #-------------------------------------------------------------------------
     # Things related to extensions and plugins
     #-------------------------------------------------------------------------
 
     def init_extension_manager(self):
         self.extension_manager = ExtensionManager(shell=self, config=self.config)
         self.configurables.append(self.extension_manager)
 
     def init_plugin_manager(self):
         self.plugin_manager = PluginManager(config=self.config)
         self.configurables.append(self.plugin_manager)
         
 
     #-------------------------------------------------------------------------
     # Things related to payloads
     #-------------------------------------------------------------------------
 
     def init_payload(self):
         self.payload_manager = PayloadManager(config=self.config)
         self.configurables.append(self.payload_manager)
 
     #-------------------------------------------------------------------------
     # Things related to the prefilter
     #-------------------------------------------------------------------------
 
     def init_prefilter(self):
         self.prefilter_manager = PrefilterManager(shell=self, config=self.config)
         self.configurables.append(self.prefilter_manager)
         # Ultimately this will be refactored in the new interpreter code, but
         # for now, we should expose the main prefilter method (there's legacy
         # code out there that may rely on this).
         self.prefilter = self.prefilter_manager.prefilter_lines
 
     def auto_rewrite_input(self, cmd):
         """Print to the screen the rewritten form of the user's command.
 
         This shows visual feedback by rewriting input lines that cause
         automatic calling to kick in, like::
 
           /f x
 
         into::
 
           ------> f(x)
 
         after the user's input prompt.  This helps the user understand that the
         input line was transformed automatically by IPython.
         """
         rw = self.displayhook.prompt1.auto_rewrite() + cmd
 
         try:
             # plain ascii works better w/ pyreadline, on some machines, so
             # we use it and only print uncolored rewrite if we have unicode
             rw = str(rw)
             print >> io.stdout, rw
         except UnicodeEncodeError:
             print "------> " + cmd
 
     #-------------------------------------------------------------------------
     # Things related to extracting values/expressions from kernel and user_ns
     #-------------------------------------------------------------------------
 
     def _simple_error(self):
         etype, value = sys.exc_info()[:2]
         return u'[ERROR] {e.__name__}: {v}'.format(e=etype, v=value)
 
     def user_variables(self, names):
         """Get a list of variable names from the user's namespace.
 
         Parameters
         ----------
         names : list of strings
           A list of names of variables to be read from the user namespace.
 
         Returns
         -------
         A dict, keyed by the input names and with the repr() of each value.
         """
         out = {}
         user_ns = self.user_ns
         for varname in names:
             try:
                 value = repr(user_ns[varname])
             except:
                 value = self._simple_error()
             out[varname] = value
         return out
 
     def user_expressions(self, expressions):
         """Evaluate a dict of expressions in the user's namespace.
 
         Parameters
         ----------
         expressions : dict
           A dict with string keys and string values.  The expression values
           should be valid Python expressions, each of which will be evaluated
           in the user namespace.
 
         Returns
         -------
         A dict, keyed like the input expressions dict, with the repr() of each
         value.
         """
         out = {}
         user_ns = self.user_ns
         global_ns = self.user_global_ns
         for key, expr in expressions.iteritems():
             try:
                 value = repr(eval(expr, global_ns, user_ns))
             except:
                 value = self._simple_error()
             out[key] = value
         return out
 
     #-------------------------------------------------------------------------
     # Things related to the running of code
     #-------------------------------------------------------------------------
 
     def ex(self, cmd):
         """Execute a normal python statement in user namespace."""
         with self.builtin_trap:
             exec cmd in self.user_global_ns, self.user_ns
 
     def ev(self, expr):
         """Evaluate python expression expr in user namespace.
 
         Returns the result of evaluation
         """
         with self.builtin_trap:
             return eval(expr, self.user_global_ns, self.user_ns)
 
     def safe_execfile(self, fname, *where, **kw):
         """A safe version of the builtin execfile().
 
         This version will never throw an exception, but instead print
         helpful error messages to the screen.  This only works on pure
         Python files with the .py extension.
 
         Parameters
         ----------
         fname : string
             The name of the file to be executed.
         where : tuple
             One or two namespaces, passed to execfile() as (globals,locals).
             If only one is given, it is passed as both.
         exit_ignore : bool (False)
             If True, then silence SystemExit for non-zero status (it is always
             silenced for zero status, as it is so common).
         raise_exceptions : bool (False)
             If True raise exceptions everywhere. Meant for testing.
 
         """
         kw.setdefault('exit_ignore', False)
         kw.setdefault('raise_exceptions', False)
 
         fname = os.path.abspath(os.path.expanduser(fname))
 
         # Make sure we can open the file
         try:
             with open(fname) as thefile:
                 pass
         except:
             warn('Could not open file <%s> for safe execution.' % fname)
             return
 
         # Find things also in current directory.  This is needed to mimic the
         # behavior of running a script from the system command line, where
         # Python inserts the script's directory into sys.path
         dname = os.path.dirname(fname)
 
         with prepended_to_syspath(dname):
             try:
                 py3compat.execfile(fname,*where)
             except SystemExit, status:
                 # If the call was made with 0 or None exit status (sys.exit(0)
                 # or sys.exit() ), don't bother showing a traceback, as both of
                 # these are considered normal by the OS:
                 # > python -c'import sys;sys.exit(0)'; echo $?
                 # 0
                 # > python -c'import sys;sys.exit()'; echo $?
                 # 0
                 # For other exit status, we show the exception unless
                 # explicitly silenced, but only in short form.
                 if kw['raise_exceptions']:
                     raise
                 if status.code not in (0, None) and not kw['exit_ignore']:
                     self.showtraceback(exception_only=True)
             except:
                 if kw['raise_exceptions']:
                     raise
                 self.showtraceback()
 
     def safe_execfile_ipy(self, fname):
         """Like safe_execfile, but for .ipy files with IPython syntax.
 
         Parameters
         ----------
         fname : str
             The name of the file to execute.  The filename must have a
             .ipy extension.
         """
         fname = os.path.abspath(os.path.expanduser(fname))
 
         # Make sure we can open the file
         try:
             with open(fname) as thefile:
                 pass
         except:
             warn('Could not open file <%s> for safe execution.' % fname)
             return
 
         # Find things also in current directory.  This is needed to mimic the
         # behavior of running a script from the system command line, where
         # Python inserts the script's directory into sys.path
         dname = os.path.dirname(fname)
 
         with prepended_to_syspath(dname):
             try:
                 with open(fname) as thefile:
                     # self.run_cell currently captures all exceptions
                     # raised in user code.  It would be nice if there were
                     # versions of runlines, execfile that did raise, so
                     # we could catch the errors.
                     self.run_cell(thefile.read(), store_history=False)
             except:
                 self.showtraceback()
                 warn('Unknown failure executing file: <%s>' % fname)
 
     def run_cell(self, raw_cell, store_history=False):
         """Run a complete IPython cell.
 
         Parameters
         ----------
         raw_cell : str
           The code (including IPython code such as %magic functions) to run.
         store_history : bool
           If True, the raw and translated cell will be stored in IPython's
           history. For user code calling back into IPython's machinery, this
           should be set to False.
         """
         if (not raw_cell) or raw_cell.isspace():
             return
 
         for line in raw_cell.splitlines():
             self.input_splitter.push(line)
         cell = self.input_splitter.source_reset()
 
         with self.builtin_trap:
             prefilter_failed = False
             if len(cell.splitlines()) == 1:
                 try:
                     # use prefilter_lines to handle trailing newlines
                     # restore trailing newline for ast.parse
                     cell = self.prefilter_manager.prefilter_lines(cell) + '\n'
                 except AliasError as e:
                     error(e)
                     prefilter_failed = True
                 except Exception:
                     # don't allow prefilter errors to crash IPython
                     self.showtraceback()
                     prefilter_failed = True
 
             # Store raw and processed history
             if store_history:
                 self.history_manager.store_inputs(self.execution_count,
                                                   cell, raw_cell)
 
             self.logger.log(cell, raw_cell)
 
             if not prefilter_failed:
                 # don't run if prefilter failed
                 cell_name = self.compile.cache(cell, self.execution_count)
 
                 with self.display_trap:
                     try:
                         code_ast = self.compile.ast_parse(cell, filename=cell_name)
                     except IndentationError:
                         self.showindentationerror()
                         self.execution_count += 1
                         return None
                     except (OverflowError, SyntaxError, ValueError, TypeError,
                             MemoryError):
                         self.showsyntaxerror()
                         self.execution_count += 1
                         return None
 
                     self.run_ast_nodes(code_ast.body, cell_name,
                                        interactivity="last_expr")
 
                     # Execute any registered post-execution functions.
                     for func, status in self._post_execute.iteritems():
                         if not status:
                             continue
                         try:
                             func()
                         except KeyboardInterrupt:
                             print >> io.stderr, "\nKeyboardInterrupt"
                         except Exception:
                             print >> io.stderr, "Disabling failed post-execution function: %s" % func
                             self.showtraceback()
                             # Deactivate failing function
                             self._post_execute[func] = False
 
         if store_history:
             # Write output to the database. Does nothing unless
             # history output logging is enabled.
             self.history_manager.store_output(self.execution_count)
             # Each cell is a *single* input, regardless of how many lines it has
             self.execution_count += 1
 
     def run_ast_nodes(self, nodelist, cell_name, interactivity='last_expr'):
         """Run a sequence of AST nodes. The execution mode depends on the
         interactivity parameter.
 
         Parameters
         ----------
         nodelist : list
           A sequence of AST nodes to run.
         cell_name : str
           Will be passed to the compiler as the filename of the cell. Typically
           the value returned by ip.compile.cache(cell).
         interactivity : str
           'all', 'last', 'last_expr' or 'none', specifying which nodes should be
           run interactively (displaying output from expressions). 'last_expr'
           will run the last node interactively only if it is an expression (i.e.
           expressions in loops or other blocks are not displayed. Other values
           for this parameter will raise a ValueError.
         """
         if not nodelist:
             return
 
         if interactivity == 'last_expr':
             if isinstance(nodelist[-1], ast.Expr):
                 interactivity = "last"
             else:
                 interactivity = "none"
 
         if interactivity == 'none':
             to_run_exec, to_run_interactive = nodelist, []
         elif interactivity == 'last':
             to_run_exec, to_run_interactive = nodelist[:-1], nodelist[-1:]
         elif interactivity == 'all':
             to_run_exec, to_run_interactive = [], nodelist
         else:
             raise ValueError("Interactivity was %r" % interactivity)
 
         exec_count = self.execution_count
 
         try:
             for i, node in enumerate(to_run_exec):
                 mod = ast.Module([node])
                 code = self.compile(mod, cell_name, "exec")
                 if self.run_code(code):
                     return True
 
             for i, node in enumerate(to_run_interactive):
                 mod = ast.Interactive([node])
                 code = self.compile(mod, cell_name, "single")
                 if self.run_code(code):
                     return True
         except:
             # It's possible to have exceptions raised here, typically by
             # compilation of odd code (such as a naked 'return' outside a
             # function) that did parse but isn't valid. Typically the exception
             # is a SyntaxError, but it's safest just to catch anything and show
             # the user a traceback.
 
             # We do only one try/except outside the loop to minimize the impact
             # on runtime, and also because if any node in the node list is
             # broken, we should stop execution completely.
             self.showtraceback()
 
         return False
 
     def run_code(self, code_obj):
         """Execute a code object.
 
         When an exception occurs, self.showtraceback() is called to display a
         traceback.
 
         Parameters
         ----------
         code_obj : code object
           A compiled code object, to be executed
         post_execute : bool [default: True]
           whether to call post_execute hooks after this particular execution.
 
         Returns
         -------
         False : successful execution.
         True : an error occurred.
         """
 
         # Set our own excepthook in case the user code tries to call it
         # directly, so that the IPython crash handler doesn't get triggered
         old_excepthook,sys.excepthook = sys.excepthook, self.excepthook
 
         # we save the original sys.excepthook in the instance, in case config
         # code (such as magics) needs access to it.
         self.sys_excepthook = old_excepthook
         outflag = 1  # happens in more places, so it's easier as default
         try:
             try:
                 self.hooks.pre_run_code_hook()
                 #rprint('Running code', repr(code_obj)) # dbg
                 exec code_obj in self.user_global_ns, self.user_ns
             finally:
                 # Reset our crash handler in place
                 sys.excepthook = old_excepthook
         except SystemExit:
             self.showtraceback(exception_only=True)
             warn("To exit: use 'exit', 'quit', or Ctrl-D.", level=1)
         except self.custom_exceptions:
             etype,value,tb = sys.exc_info()
             self.CustomTB(etype,value,tb)
         except:
             self.showtraceback()
         else:
             outflag = 0
             if softspace(sys.stdout, 0):
                 print
 
         return outflag
 
     # For backwards compatibility
     runcode = run_code
 
     #-------------------------------------------------------------------------
     # Things related to GUI support and pylab
     #-------------------------------------------------------------------------
 
     def enable_pylab(self, gui=None, import_all=True):
         raise NotImplementedError('Implement enable_pylab in a subclass')
 
     #-------------------------------------------------------------------------
     # Utilities
     #-------------------------------------------------------------------------
 
     def var_expand(self, cmd, depth=0, formatter=DollarFormatter()):
         """Expand python variables in a string.
 
         The depth argument indicates how many frames above the caller should
         be walked to look for the local namespace where to expand variables.
 
         The global namespace for expansion is always the user's interactive
         namespace.
         """
         ns = self.user_ns.copy()
         ns.update(sys._getframe(depth+1).f_locals)
         ns.pop('self', None)
         return formatter.format(cmd, **ns)
 
     def mktempfile(self, data=None, prefix='ipython_edit_'):
         """Make a new tempfile and return its filename.
 
         This makes a call to tempfile.mktemp, but it registers the created
         filename internally so ipython cleans it up at exit time.
 
         Optional inputs:
 
           - data(None): if data is given, it gets written out to the temp file
           immediately, and the file is closed again."""
 
         filename = tempfile.mktemp('.py', prefix)
         self.tempfiles.append(filename)
 
         if data:
             tmp_file = open(filename,'w')
             tmp_file.write(data)
             tmp_file.close()
         return filename
 
     # TODO:  This should be removed when Term is refactored.
     def write(self,data):
         """Write a string to the default output"""
         io.stdout.write(data)
 
     # TODO:  This should be removed when Term is refactored.
     def write_err(self,data):
         """Write a string to the default error output"""
         io.stderr.write(data)
 
     def ask_yes_no(self, prompt, default=None):
         if self.quiet:
             return True
         return ask_yes_no(prompt,default)
 
     def show_usage(self):
         """Show a usage message"""
         page.page(IPython.core.usage.interactive_usage)
 
     def find_user_code(self, target, raw=True):
         """Get a code string from history, file, or a string or macro.
 
         This is mainly used by magic functions.
 
         Parameters
         ----------
         target : str
           A string specifying code to retrieve. This will be tried respectively
           as: ranges of input history (see %history for syntax), a filename, or
           an expression evaluating to a string or Macro in the user namespace.
         raw : bool
           If true (default), retrieve raw history. Has no effect on the other
           retrieval mechanisms.
 
         Returns
         -------
         A string of code.
 
         ValueError is raised if nothing is found, and TypeError if it evaluates
         to an object of another type. In each case, .args[0] is a printable
         message.
         """
         code = self.extract_input_lines(target, raw=raw)  # Grab history
         if code:
             return code
         if os.path.isfile(target):                        # Read file
             return open(target, "r").read()
 
         try:                                              # User namespace
             codeobj = eval(target, self.user_ns)
         except Exception:
             raise ValueError(("'%s' was not found in history, as a file, nor in"
                                 " the user namespace.") % target)
         if isinstance(codeobj, basestring):
             return codeobj
         elif isinstance(codeobj, Macro):
             return codeobj.value
 
         raise TypeError("%s is neither a string nor a macro." % target,
                         codeobj)
 
     #-------------------------------------------------------------------------
     # Things related to IPython exiting
     #-------------------------------------------------------------------------
     def atexit_operations(self):
         """This will be executed at the time of exit.
 
         Cleanup operations and saving of persistent data that is done
         unconditionally by IPython should be performed here.
 
         For things that may depend on startup flags or platform specifics (such
         as having readline or not), register a separate atexit function in the
         code that has the appropriate information, rather than trying to
         clutter
         """
         # Close the history session (this stores the end time and line count)
         # this must be *before* the tempfile cleanup, in case of temporary
         # history db
         self.history_manager.end_session()
 
         # Cleanup all tempfiles left around
         for tfile in self.tempfiles:
             try:
                 os.unlink(tfile)
             except OSError:
                 pass
 
         # Clear all user namespaces to release all references cleanly.
         self.reset(new_session=False)
 
         # Run user hooks
         self.hooks.shutdown_hook()
 
     def cleanup(self):
         self.restore_sys_module_state()
 
 
 class InteractiveShellABC(object):
     """An abstract base class for InteractiveShell."""
     __metaclass__ = abc.ABCMeta
 
 InteractiveShellABC.register(InteractiveShell)

IPython/utils/path.py

@@ -1,436 +1,446 b''
 # encoding: utf-8
 """
 Utilities for path handling.
 """
 
 #-----------------------------------------------------------------------------
 #  Copyright (C) 2008-2009  The IPython Development Team
 #
 #  Distributed under the terms of the BSD License.  The full license is in
 #  the file COPYING, distributed as part of this software.
 #-----------------------------------------------------------------------------
 
 #-----------------------------------------------------------------------------
 # Imports
 #-----------------------------------------------------------------------------
 
 import os
 import sys
 import tempfile
 import warnings
 from hashlib import md5
 
 import IPython
 from IPython.utils.process import system
 from IPython.utils.importstring import import_item
 from IPython.utils import py3compat
 
 #-----------------------------------------------------------------------------
 # Code
 #-----------------------------------------------------------------------------
 
 fs_encoding = sys.getfilesystemencoding()
 
 def _get_long_path_name(path):
     """Dummy no-op."""
     return path
 
 def _writable_dir(path):
     """Whether `path` is a directory, to which the user has write access."""
     return os.path.isdir(path) and os.access(path, os.W_OK)
 
 if sys.platform == 'win32':
     def _get_long_path_name(path):
         """Get a long path name (expand ~) on Windows using ctypes.
 
         Examples
         --------
 
         >>> get_long_path_name('c:\\docume~1')
         u'c:\\\\Documents and Settings'
 
         """
         try:
             import ctypes
         except ImportError:
             raise ImportError('you need to have ctypes installed for this to work')
         _GetLongPathName = ctypes.windll.kernel32.GetLongPathNameW
         _GetLongPathName.argtypes = [ctypes.c_wchar_p, ctypes.c_wchar_p,
             ctypes.c_uint ]
 
         buf = ctypes.create_unicode_buffer(260)
         rv = _GetLongPathName(path, buf, 260)
         if rv == 0 or rv > 260:
             return path
         else:
             return buf.value
 
 
 def get_long_path_name(path):
     """Expand a path into its long form.
 
     On Windows this expands any ~ in the paths. On other platforms, it is
     a null operation.
     """
     return _get_long_path_name(path)
 
 
 def unquote_filename(name, win32=(sys.platform=='win32')):
     """ On Windows, remove leading and trailing quotes from filenames.
     """
     if win32:
         if name.startswith(("'", '"')) and name.endswith(("'", '"')):
             name = name[1:-1]
     return name
 
 
 def get_py_filename(name, force_win32=None):
     """Return a valid python filename in the current directory.
 
     If the given name is not a file, it adds '.py' and searches again.
     Raises IOError with an informative message if the file isn't found.
 
     On Windows, apply Windows semantics to the filename. In particular, remove
     any quoting that has been applied to it. This option can be forced for
     testing purposes.
     """
 
     name = os.path.expanduser(name)
     if force_win32 is None:
         win32 = (sys.platform == 'win32')
     else:
         win32 = force_win32
     name = unquote_filename(name, win32=win32)
     if not os.path.isfile(name) and not name.endswith('.py'):
         name += '.py'
     if os.path.isfile(name):
         return name
     else:
         raise IOError,'File `%s` not found.' % name
 
 
 def filefind(filename, path_dirs=None):
     """Find a file by looking through a sequence of paths.
 
     This iterates through a sequence of paths looking for a file and returns
     the full, absolute path of the first occurence of the file.  If no set of
     path dirs is given, the filename is tested as is, after running through
     :func:`expandvars` and :func:`expanduser`.  Thus a simple call::
 
         filefind('myfile.txt')
 
     will find the file in the current working dir, but::
 
         filefind('~/myfile.txt')
 
     Will find the file in the users home directory.  This function does not
     automatically try any paths, such as the cwd or the user's home directory.
 
     Parameters
     ----------
     filename : str
         The filename to look for.
     path_dirs : str, None or sequence of str
         The sequence of paths to look for the file in.  If None, the filename
         need to be absolute or be in the cwd.  If a string, the string is
         put into a sequence and the searched.  If a sequence, walk through
         each element and join with ``filename``, calling :func:`expandvars`
         and :func:`expanduser` before testing for existence.
 
     Returns
     -------
     Raises :exc:`IOError` or returns absolute path to file.
     """
 
     # If paths are quoted, abspath gets confused, strip them...
     filename = filename.strip('"').strip("'")
     # If the input is an absolute path, just check it exists
     if os.path.isabs(filename) and os.path.isfile(filename):
         return filename
 
     if path_dirs is None:
         path_dirs = ("",)
     elif isinstance(path_dirs, basestring):
         path_dirs = (path_dirs,)
 
     for path in path_dirs:
         if path == '.': path = os.getcwdu()
         testname = expand_path(os.path.join(path, filename))
         if os.path.isfile(testname):
             return os.path.abspath(testname)
 
     raise IOError("File %r does not exist in any of the search paths: %r" %
                   (filename, path_dirs) )
 
 
 class HomeDirError(Exception):
     pass
 
 
-def get_home_dir():
-    """Return the closest possible equivalent to a 'home' directory.
+def get_home_dir(require_writable=False):
+    """Return the 'home' directory, as a unicode string.
 
     * First, check for frozen env in case of py2exe
-    * Otherwise, defer to os.path.expanduser('~'), ensuring unicode
+    * Otherwise, defer to os.path.expanduser('~')
     
     See stdlib docs for how this is determined.
-    
     $HOME is first priority on *ALL* platforms.
+    
+    Parameters
+    ----------
+    
+    require_writable : bool [default: False]
+        if True:
+            guarantees the return value is a writable directory, otherwise
+            raises HomeDirError
+        if False:
+            The path is resolved, but it is not guaranteed to exist or be writable.
     """
 
     # first, check py2exe distribution root directory for _ipython.
     # This overrides all. Normally does not exist.
 
     if hasattr(sys, "frozen"): #Is frozen by py2exe
         if '\\library.zip\\' in IPython.__file__.lower():#libraries compressed to zip-file
             root, rest = IPython.__file__.lower().split('library.zip')
         else:
             root=os.path.join(os.path.split(IPython.__file__)[0],"../../")
         root=os.path.abspath(root).rstrip('\\')
         if _writable_dir(os.path.join(root, '_ipython')):
             os.environ["IPYKITROOT"] = root
         return py3compat.cast_unicode(root, fs_encoding)
     
     homedir = os.path.expanduser('~')
-    if _writable_dir(homedir):
+    if (not require_writable) or _writable_dir(homedir):
         return py3compat.cast_unicode(homedir, fs_encoding)
     else:
-        raise HomeDirError('%s not a writable dir, set $HOME env to override' % homedir)
+        raise HomeDirError('%s is not a writable dir, set $HOME env to override' % homedir)
 
 def get_xdg_dir():
     """Return the XDG_CONFIG_HOME, if it is defined and exists, else None.
 
     This is only for posix (Linux,Unix,OS X, etc) systems.
     """
 
     env = os.environ
 
     if os.name == 'posix':
         # Linux, Unix, AIX, OS X
-        # use ~/.config if not set OR empty
+        # use ~/.config if empty OR not set
         xdg = env.get("XDG_CONFIG_HOME", None) or os.path.join(get_home_dir(), '.config')
         if xdg and _writable_dir(xdg):
             return py3compat.cast_unicode(xdg, fs_encoding)
 
     return None
 
 
 def get_ipython_dir():
     """Get the IPython directory for this platform and user.
 
     This uses the logic in `get_home_dir` to find the home directory
     and then adds .ipython to the end of the path.
     """
 
     env = os.environ
     pjoin = os.path.join
 
 
     ipdir_def = '.ipython'
     xdg_def = 'ipython'
 
     home_dir = get_home_dir()
     xdg_dir = get_xdg_dir()
+    
     # import pdb; pdb.set_trace()  # dbg
     ipdir = env.get('IPYTHON_DIR', env.get('IPYTHONDIR', None))
     if ipdir is None:
         # not set explicitly, use XDG_CONFIG_HOME or HOME
         home_ipdir = pjoin(home_dir, ipdir_def)
         if xdg_dir:
             # use XDG, as long as the user isn't already
             # using $HOME/.ipython and *not* XDG/ipython
 
             xdg_ipdir = pjoin(xdg_dir, xdg_def)
 
             if _writable_dir(xdg_ipdir) or not _writable_dir(home_ipdir):
                 ipdir = xdg_ipdir
 
         if ipdir is None:
             # not using XDG
             ipdir = home_ipdir
 
     ipdir = os.path.normpath(os.path.expanduser(ipdir))
 
     if os.path.exists(ipdir) and not _writable_dir(ipdir):
         # ipdir exists, but is not writable
         warnings.warn("IPython dir '%s' is not a writable location,"
                         " using a temp directory."%ipdir)
         ipdir = tempfile.mkdtemp()
     elif not os.path.exists(ipdir):
         parent = ipdir.rsplit(os.path.sep, 1)[0]
         if not _writable_dir(parent):
             # ipdir does not exist and parent isn't writable
             warnings.warn("IPython parent '%s' is not a writable location,"
                         " using a temp directory."%parent)
             ipdir = tempfile.mkdtemp()
 
     return py3compat.cast_unicode(ipdir, fs_encoding)
 
 
 def get_ipython_package_dir():
     """Get the base directory where IPython itself is installed."""
     ipdir = os.path.dirname(IPython.__file__)
     return py3compat.cast_unicode(ipdir, fs_encoding)
 
 
 def get_ipython_module_path(module_str):
     """Find the path to an IPython module in this version of IPython.
 
     This will always find the version of the module that is in this importable
     IPython package. This will always return the path to the ``.py``
     version of the module.
     """
     if module_str == 'IPython':
         return os.path.join(get_ipython_package_dir(), '__init__.py')
     mod = import_item(module_str)
     the_path = mod.__file__.replace('.pyc', '.py')
     the_path = the_path.replace('.pyo', '.py')
     return py3compat.cast_unicode(the_path, fs_encoding)
 
 def locate_profile(profile='default'):
     """Find the path to the folder associated with a given profile.
     
     I.e. find $IPYTHON_DIR/profile_whatever.
     """
     from IPython.core.profiledir import ProfileDir, ProfileDirError
     try:
         pd = ProfileDir.find_profile_dir_by_name(get_ipython_dir(), profile)
     except ProfileDirError:
         # IOError makes more sense when people are expecting a path
         raise IOError("Couldn't find profile %r" % profile)
     return pd.location
 
 def expand_path(s):
     """Expand $VARS and ~names in a string, like a shell
 
     :Examples:
 
        In [2]: os.environ['FOO']='test'
 
        In [3]: expand_path('variable FOO is $FOO')
        Out[3]: 'variable FOO is test'
     """
     # This is a pretty subtle hack. When expand user is given a UNC path
     # on Windows (\\server\share$\%username%), os.path.expandvars, removes
     # the $ to get (\\server\share\%username%). I think it considered $
     # alone an empty var. But, we need the $ to remains there (it indicates
     # a hidden share).
     if os.name=='nt':
         s = s.replace('$\\', 'IPYTHON_TEMP')
     s = os.path.expandvars(os.path.expanduser(s))
     if os.name=='nt':
         s = s.replace('IPYTHON_TEMP', '$\\')
     return s
 
 
 def target_outdated(target,deps):
     """Determine whether a target is out of date.
 
     target_outdated(target,deps) -> 1/0
 
     deps: list of filenames which MUST exist.
     target: single filename which may or may not exist.
 
     If target doesn't exist or is older than any file listed in deps, return
     true, otherwise return false.
     """
     try:
         target_time = os.path.getmtime(target)
     except os.error:
         return 1
     for dep in deps:
         dep_time = os.path.getmtime(dep)
         if dep_time > target_time:
             #print "For target",target,"Dep failed:",dep # dbg
             #print "times (dep,tar):",dep_time,target_time # dbg
             return 1
     return 0
 
 
 def target_update(target,deps,cmd):
     """Update a target with a given command given a list of dependencies.
 
     target_update(target,deps,cmd) -> runs cmd if target is outdated.
 
     This is just a wrapper around target_outdated() which calls the given
     command if target is outdated."""
 
     if target_outdated(target,deps):
         system(cmd)
 
 def filehash(path):
     """Make an MD5 hash of a file, ignoring any differences in line
     ending characters."""
     with open(path, "rU") as f:
         return md5(py3compat.str_to_bytes(f.read())).hexdigest()
 
 # If the config is unmodified from the default, we'll just delete it.
 # These are consistent for 0.10.x, thankfully. We're not going to worry about
 # older versions.
 old_config_md5 = {'ipy_user_conf.py': 'fc108bedff4b9a00f91fa0a5999140d3',
                   'ipythonrc': '12a68954f3403eea2eec09dc8fe5a9b5'}
 
 def check_for_old_config(ipython_dir=None):
     """Check for old config files, and present a warning if they exist.
 
     A link to the docs of the new config is included in the message.
 
     This should mitigate confusion with the transition to the new
     config system in 0.11.
     """
     if ipython_dir is None:
         ipython_dir = get_ipython_dir()
 
     old_configs = ['ipy_user_conf.py', 'ipythonrc', 'ipython_config.py']
     warned = False
     for cfg in old_configs:
         f = os.path.join(ipython_dir, cfg)
         if os.path.exists(f):
             if filehash(f) == old_config_md5.get(cfg, ''):
                 os.unlink(f)
             else:
                 warnings.warn("Found old IPython config file %r (modified by user)"%f)
                 warned = True
 
     if warned:
         warnings.warn("""
   The IPython configuration system has changed as of 0.11, and these files will
   be ignored. See http://ipython.github.com/ipython-doc/dev/config for details
   of the new config system.
   To start configuring IPython, do `ipython profile create`, and edit
   `ipython_config.py` in <ipython_dir>/profile_default.
   If you need to leave the old config files in place for an older version of
   IPython and want to suppress this warning message, set
   `c.InteractiveShellApp.ignore_old_config=True` in the new config.""")
 
 def get_security_file(filename, profile='default'):
     """Return the absolute path of a security file given by filename and profile
     
     This allows users and developers to find security files without
     knowledge of the IPython directory structure. The search path
     will be ['.', profile.security_dir]
     
     Parameters
     ----------
     
     filename : str
         The file to be found. If it is passed as an absolute path, it will
         simply be returned.
     profile : str [default: 'default']
         The name of the profile to search.  Leaving this unspecified
         The file to be found. If it is passed as an absolute path, fname will
         simply be returned.
     
     Returns
     -------
     Raises :exc:`IOError` if file not found or returns absolute path to file.
     """
     # import here, because profiledir also imports from utils.path
     from IPython.core.profiledir import ProfileDir
     try:
         pd = ProfileDir.find_profile_dir_by_name(get_ipython_dir(), profile)
     except Exception:
         # will raise ProfileDirError if no such profile
         raise IOError("Profile %r not found")
     return filefind(filename, ['.', pd.security_dir])
 

IPython/utils/tests/test_path.py

@@ -1,375 +1,375 b''
 # encoding: utf-8
 """Tests for IPython.utils.path.py"""
 
 #-----------------------------------------------------------------------------
 #  Copyright (C) 2008  The IPython Development Team
 #
 #  Distributed under the terms of the BSD License.  The full license is in
 #  the file COPYING, distributed as part of this software.
 #-----------------------------------------------------------------------------
 
 #-----------------------------------------------------------------------------
 # Imports
 #-----------------------------------------------------------------------------
 
 from __future__ import with_statement
 
 import os
 import shutil
 import sys
 import tempfile
 from io import StringIO
 
 from os.path import join, abspath, split
 
 import nose.tools as nt
 
 from nose import with_setup
 
 import IPython
 from IPython.testing import decorators as dec
 from IPython.testing.decorators import skip_if_not_win32, skip_win32
 from IPython.testing.tools import make_tempfile, AssertPrints
 from IPython.utils import path, io
 from IPython.utils import py3compat
 
 # Platform-dependent imports
 try:
     import _winreg as wreg
 except ImportError:
     #Fake _winreg module on none windows platforms
     import types
     wr_name = "winreg" if py3compat.PY3 else "_winreg"
     sys.modules[wr_name] = types.ModuleType(wr_name)
     import _winreg as wreg
     #Add entries that needs to be stubbed by the testing code
     (wreg.OpenKey, wreg.QueryValueEx,) = (None, None)
 
 try:
     reload
 except NameError:   # Python 3
     from imp import reload
 
 #-----------------------------------------------------------------------------
 # Globals
 #-----------------------------------------------------------------------------
 env = os.environ
 TEST_FILE_PATH = split(abspath(__file__))[0]
 TMP_TEST_DIR = tempfile.mkdtemp()
 HOME_TEST_DIR = join(TMP_TEST_DIR, "home_test_dir")
 XDG_TEST_DIR = join(HOME_TEST_DIR, "xdg_test_dir")
 IP_TEST_DIR = join(HOME_TEST_DIR,'.ipython')
 #
 # Setup/teardown functions/decorators
 #
 
 def setup():
     """Setup testenvironment for the module:
 
             - Adds dummy home dir tree
     """
     # Do not mask exceptions here.  In particular, catching WindowsError is a
     # problem because that exception is only defined on Windows...
     os.makedirs(IP_TEST_DIR)
     os.makedirs(os.path.join(XDG_TEST_DIR, 'ipython'))
 
 
 def teardown():
     """Teardown testenvironment for the module:
 
             - Remove dummy home dir tree
     """
     # Note: we remove the parent test dir, which is the root of all test
     # subdirs we may have created.  Use shutil instead of os.removedirs, so
     # that non-empty directories are all recursively removed.
     shutil.rmtree(TMP_TEST_DIR)
 
 
 def setup_environment():
     """Setup testenvironment for some functions that are tested
     in this module. In particular this functions stores attributes
     and other things that we need to stub in some test functions.
     This needs to be done on a function level and not module level because
     each testfunction needs a pristine environment.
     """
     global oldstuff, platformstuff
     oldstuff = (env.copy(), os.name, path.get_home_dir, IPython.__file__, os.getcwd())
 
     if os.name == 'nt':
         platformstuff = (wreg.OpenKey, wreg.QueryValueEx,)
 
 
 def teardown_environment():
     """Restore things that were remebered by the setup_environment function
     """
     (oldenv, os.name, path.get_home_dir, IPython.__file__, old_wd) = oldstuff
     os.chdir(old_wd)
     reload(path)
 
     for key in env.keys():
         if key not in oldenv:
             del env[key]
     env.update(oldenv)
     if hasattr(sys, 'frozen'):
         del sys.frozen
     if os.name == 'nt':
         (wreg.OpenKey, wreg.QueryValueEx,) = platformstuff
 
 # Build decorator that uses the setup_environment/setup_environment
 with_environment = with_setup(setup_environment, teardown_environment)
 
 @skip_if_not_win32
 @with_environment
 def test_get_home_dir_1():
     """Testcase for py2exe logic, un-compressed lib
     """
     sys.frozen = True
 
     #fake filename for IPython.__init__
     IPython.__file__ = abspath(join(HOME_TEST_DIR, "Lib/IPython/__init__.py"))
 
     home_dir = path.get_home_dir()
     nt.assert_equal(home_dir, abspath(HOME_TEST_DIR))
 
 
 @skip_if_not_win32
 @with_environment
 def test_get_home_dir_2():
     """Testcase for py2exe logic, compressed lib
     """
     sys.frozen = True
     #fake filename for IPython.__init__
     IPython.__file__ = abspath(join(HOME_TEST_DIR, "Library.zip/IPython/__init__.py")).lower()
 
-    home_dir = path.get_home_dir()
+    home_dir = path.get_home_dir(True)
     nt.assert_equal(home_dir, abspath(HOME_TEST_DIR).lower())
 
 
 @with_environment
 def test_get_home_dir_3():
     """get_home_dir() uses $HOME if set"""
     env["HOME"] = HOME_TEST_DIR
-    home_dir = path.get_home_dir()
+    home_dir = path.get_home_dir(True)
     nt.assert_equal(home_dir, env["HOME"])
 
 
 @with_environment
 def test_get_home_dir_4():
     """get_home_dir() still works if $HOME is not set"""
 
     if 'HOME' in env: del env['HOME']
     # this should still succeed, but we don't know what the answer should be
-    home = path.get_home_dir()
+    home = path.get_home_dir(True)
     nt.assert_true(path._writable_dir(home))
 
 @with_environment
 def test_get_home_dir_5():
     """raise HomeDirError if $HOME is specified, but not a writable dir"""
     env['HOME'] = abspath(HOME_TEST_DIR+'garbage')
-    nt.assert_raises(path.HomeDirError, path.get_home_dir)
+    nt.assert_raises(path.HomeDirError, path.get_home_dir, True)
 
 @with_environment
 def test_get_ipython_dir_1():
     """test_get_ipython_dir_1, Testcase to see if we can call get_ipython_dir without Exceptions."""
     env_ipdir = os.path.join("someplace", ".ipython")
     path._writable_dir = lambda path: True
     env['IPYTHON_DIR'] = env_ipdir
     ipdir = path.get_ipython_dir()
     nt.assert_equal(ipdir, env_ipdir)
 
 
 @with_environment
 def test_get_ipython_dir_2():
     """test_get_ipython_dir_2, Testcase to see if we can call get_ipython_dir without Exceptions."""
     path.get_home_dir = lambda : "someplace"
     path.get_xdg_dir = lambda : None
     path._writable_dir = lambda path: True
     os.name = "posix"
     env.pop('IPYTHON_DIR', None)
     env.pop('IPYTHONDIR', None)
     env.pop('XDG_CONFIG_HOME', None)
     ipdir = path.get_ipython_dir()
     nt.assert_equal(ipdir, os.path.join("someplace", ".ipython"))
 
 @with_environment
 def test_get_ipython_dir_3():
     """test_get_ipython_dir_3, use XDG if defined, and .ipython doesn't exist."""
     path.get_home_dir = lambda : "someplace"
     path._writable_dir = lambda path: True
     os.name = "posix"
     env.pop('IPYTHON_DIR', None)
     env.pop('IPYTHONDIR', None)
     env['XDG_CONFIG_HOME'] = XDG_TEST_DIR
     ipdir = path.get_ipython_dir()
     nt.assert_equal(ipdir, os.path.join(XDG_TEST_DIR, "ipython"))
 
 @with_environment
 def test_get_ipython_dir_4():
     """test_get_ipython_dir_4, use XDG if both exist."""
     path.get_home_dir = lambda : HOME_TEST_DIR
     os.name = "posix"
     env.pop('IPYTHON_DIR', None)
     env.pop('IPYTHONDIR', None)
     env['XDG_CONFIG_HOME'] = XDG_TEST_DIR
     xdg_ipdir = os.path.join(XDG_TEST_DIR, "ipython")
     ipdir = path.get_ipython_dir()
     nt.assert_equal(ipdir, xdg_ipdir)
 
 @with_environment
 def test_get_ipython_dir_5():
     """test_get_ipython_dir_5, use .ipython if exists and XDG defined, but doesn't exist."""
     path.get_home_dir = lambda : HOME_TEST_DIR
     os.name = "posix"
     env.pop('IPYTHON_DIR', None)
     env.pop('IPYTHONDIR', None)
     env['XDG_CONFIG_HOME'] = XDG_TEST_DIR
     os.rmdir(os.path.join(XDG_TEST_DIR, 'ipython'))
     ipdir = path.get_ipython_dir()
     nt.assert_equal(ipdir, IP_TEST_DIR)
 
 @with_environment
 def test_get_ipython_dir_6():
     """test_get_ipython_dir_6, use XDG if defined and neither exist."""
     xdg = os.path.join(HOME_TEST_DIR, 'somexdg')
     os.mkdir(xdg)
     shutil.rmtree(os.path.join(HOME_TEST_DIR, '.ipython'))
     path.get_home_dir = lambda : HOME_TEST_DIR
     path.get_xdg_dir = lambda : xdg
     os.name = "posix"
     env.pop('IPYTHON_DIR', None)
     env.pop('IPYTHONDIR', None)
     env.pop('XDG_CONFIG_HOME', None)
     xdg_ipdir = os.path.join(xdg, "ipython")
     ipdir = path.get_ipython_dir()
     nt.assert_equal(ipdir, xdg_ipdir)
 
 @with_environment
 def test_get_ipython_dir_7():
     """test_get_ipython_dir_7, test home directory expansion on IPYTHON_DIR"""
     path._writable_dir = lambda path: True
     home_dir = os.path.expanduser('~')
     env['IPYTHON_DIR'] = os.path.join('~', 'somewhere')
     ipdir = path.get_ipython_dir()
     nt.assert_equal(ipdir, os.path.join(home_dir, 'somewhere'))
 
 
 @with_environment
 def test_get_xdg_dir_1():
     """test_get_xdg_dir_1, check xdg_dir"""
     reload(path)
     path._writable_dir = lambda path: True
     path.get_home_dir = lambda : 'somewhere'
     os.name = "posix"
     env.pop('IPYTHON_DIR', None)
     env.pop('IPYTHONDIR', None)
     env.pop('XDG_CONFIG_HOME', None)
 
     nt.assert_equal(path.get_xdg_dir(), os.path.join('somewhere', '.config'))
 
 
 @with_environment
 def test_get_xdg_dir_1():
     """test_get_xdg_dir_1, check nonexistant xdg_dir"""
     reload(path)
     path.get_home_dir = lambda : HOME_TEST_DIR
     os.name = "posix"
     env.pop('IPYTHON_DIR', None)
     env.pop('IPYTHONDIR', None)
     env.pop('XDG_CONFIG_HOME', None)
     nt.assert_equal(path.get_xdg_dir(), None)
 
 @with_environment
 def test_get_xdg_dir_2():
     """test_get_xdg_dir_2, check xdg_dir default to ~/.config"""
     reload(path)
     path.get_home_dir = lambda : HOME_TEST_DIR
     os.name = "posix"
     env.pop('IPYTHON_DIR', None)
     env.pop('IPYTHONDIR', None)
     env.pop('XDG_CONFIG_HOME', None)
     cfgdir=os.path.join(path.get_home_dir(), '.config')
     os.makedirs(cfgdir)
 
     nt.assert_equal(path.get_xdg_dir(), cfgdir)
 
 def test_filefind():
     """Various tests for filefind"""
     f = tempfile.NamedTemporaryFile()
     # print 'fname:',f.name
     alt_dirs = path.get_ipython_dir()
     t = path.filefind(f.name, alt_dirs)
     # print 'found:',t
 
 
 def test_get_ipython_package_dir():
     ipdir = path.get_ipython_package_dir()
     nt.assert_true(os.path.isdir(ipdir))
 
 
 def test_get_ipython_module_path():
     ipapp_path = path.get_ipython_module_path('IPython.frontend.terminal.ipapp')
     nt.assert_true(os.path.isfile(ipapp_path))
 
 
 @dec.skip_if_not_win32
 def test_get_long_path_name_win32():
     p = path.get_long_path_name('c:\\docume~1')
     nt.assert_equals(p,u'c:\\Documents and Settings')
 
 
 @dec.skip_win32
 def test_get_long_path_name():
     p = path.get_long_path_name('/usr/local')
     nt.assert_equals(p,'/usr/local')
 
 @dec.skip_win32 # can't create not-user-writable dir on win
 @with_environment
 def test_not_writable_ipdir():
     tmpdir = tempfile.mkdtemp()
     os.name = "posix"
     env.pop('IPYTHON_DIR', None)
     env.pop('IPYTHONDIR', None)
     env.pop('XDG_CONFIG_HOME', None)
     env['HOME'] = tmpdir
     ipdir = os.path.join(tmpdir, '.ipython')
     os.mkdir(ipdir)
     os.chmod(ipdir, 600)
     with AssertPrints('is not a writable location', channel='stderr'):
         ipdir = path.get_ipython_dir()
     env.pop('IPYTHON_DIR', None)
 
 def test_unquote_filename():
     for win32 in (True, False):
         nt.assert_equals(path.unquote_filename('foo.py', win32=win32), 'foo.py')
         nt.assert_equals(path.unquote_filename('foo bar.py', win32=win32), 'foo bar.py')
     nt.assert_equals(path.unquote_filename('"foo.py"', win32=True), 'foo.py')
     nt.assert_equals(path.unquote_filename('"foo bar.py"', win32=True), 'foo bar.py')
     nt.assert_equals(path.unquote_filename("'foo.py'", win32=True), 'foo.py')
     nt.assert_equals(path.unquote_filename("'foo bar.py'", win32=True), 'foo bar.py')
     nt.assert_equals(path.unquote_filename('"foo.py"', win32=False), '"foo.py"')
     nt.assert_equals(path.unquote_filename('"foo bar.py"', win32=False), '"foo bar.py"')
     nt.assert_equals(path.unquote_filename("'foo.py'", win32=False), "'foo.py'")
     nt.assert_equals(path.unquote_filename("'foo bar.py'", win32=False), "'foo bar.py'")
 
 @with_environment
 def test_get_py_filename():
     os.chdir(TMP_TEST_DIR)
     for win32 in (True, False):
         with make_tempfile('foo.py'):
             nt.assert_equals(path.get_py_filename('foo.py', force_win32=win32), 'foo.py')
             nt.assert_equals(path.get_py_filename('foo', force_win32=win32), 'foo.py')
         with make_tempfile('foo'):
             nt.assert_equals(path.get_py_filename('foo', force_win32=win32), 'foo')
             nt.assert_raises(IOError, path.get_py_filename, 'foo.py', force_win32=win32)
         nt.assert_raises(IOError, path.get_py_filename, 'foo', force_win32=win32)
         nt.assert_raises(IOError, path.get_py_filename, 'foo.py', force_win32=win32)
         true_fn = 'foo with spaces.py'
         with make_tempfile(true_fn):
             nt.assert_equals(path.get_py_filename('foo with spaces', force_win32=win32), true_fn)
             nt.assert_equals(path.get_py_filename('foo with spaces.py', force_win32=win32), true_fn)
             if win32:
                 nt.assert_equals(path.get_py_filename('"foo with spaces.py"', force_win32=True), true_fn)
                 nt.assert_equals(path.get_py_filename("'foo with spaces.py'", force_win32=True), true_fn)
             else:
                 nt.assert_raises(IOError, path.get_py_filename, '"foo with spaces.py"', force_win32=False)
                 nt.assert_raises(IOError, path.get_py_filename, "'foo with spaces.py'", force_win32=False)