##// END OF EJS Templates
Merge branch 'master' of github.com:ipython/ipython
Merge branch 'master' of github.com:ipython/ipython

File last commit:

r14990:07072a49 merge
r15912:ebb27d01 merge
Show More
ipython_directive.py
1071 lines | 36.2 KiB | text/x-python | PythonLexer
# -*- coding: utf-8 -*-
"""
Sphinx directive to support embedded IPython code.
This directive allows pasting of entire interactive IPython sessions, prompts
and all, and their code will actually get re-executed at doc build time, with
all prompts renumbered sequentially. It also allows you to input code as a pure
python input by giving the argument python to the directive. The output looks
like an interactive ipython section.
To enable this directive, simply list it in your Sphinx ``conf.py`` file
(making sure the directory where you placed it is visible to sphinx, as is
needed for all Sphinx directives). For example, to enable syntax highlighting
and the IPython directive::
extensions = ['IPython.sphinxext.ipython_console_highlighting',
'IPython.sphinxext.ipython_directive']
The IPython directive outputs code-blocks with the language 'ipython'. So
if you do not have the syntax highlighting extension enabled as well, then
all rendered code-blocks will be uncolored. By default this directive assumes
that your prompts are unchanged IPython ones, but this can be customized.
The configurable options that can be placed in conf.py are:
ipython_savefig_dir:
The directory in which to save the figures. This is relative to the
Sphinx source directory. The default is `html_static_path`.
ipython_rgxin:
The compiled regular expression to denote the start of IPython input
lines. The default is re.compile('In \[(\d+)\]:\s?(.*)\s*'). You
shouldn't need to change this.
ipython_rgxout:
The compiled regular expression to denote the start of IPython output
lines. The default is re.compile('Out\[(\d+)\]:\s?(.*)\s*'). You
shouldn't need to change this.
ipython_promptin:
The string to represent the IPython input prompt in the generated ReST.
The default is 'In [%d]:'. This expects that the line numbers are used
in the prompt.
ipython_promptout:
The string to represent the IPython prompt in the generated ReST. The
default is 'Out [%d]:'. This expects that the line numbers are used
in the prompt.
ipython_mplbackend:
The string which specifies if the embedded Sphinx shell should import
Matplotlib and set the backend. The value specifies a backend that is
passed to `matplotlib.use()` before any lines in `ipython_execlines` are
executed. If not specified in conf.py, then the default value of 'agg' is
used. To use the IPython directive without matplotlib as a dependency, set
the value to `None`. It may end up that matplotlib is still imported
if the user specifies so in `ipython_execlines` or makes use of the
@savefig pseudo decorator.
ipython_execlines:
A list of strings to be exec'd in the embedded Sphinx shell. Typical
usage is to make certain packages always available. Set this to an empty
list if you wish to have no imports always available. If specified in
conf.py as `None`, then it has the effect of making no imports available.
If omitted from conf.py altogether, then the default value of
['import numpy as np', 'import matplotlib.pyplot as plt'] is used.
ipython_holdcount
When the @suppress pseudo-decorator is used, the execution count can be
incremented or not. The default behavior is to hold the execution count,
corresponding to a value of `True`. Set this to `False` to increment
the execution count after each suppressed command.
As an example, to use the IPython directive when `matplotlib` is not available,
one sets the backend to `None`::
ipython_mplbackend = None
An example usage of the directive is:
.. code-block:: rst
.. ipython::
In [1]: x = 1
In [2]: y = x**2
In [3]: print(y)
See http://matplotlib.org/sampledoc/ipython_directive.html for additional
documentation.
Pseudo-Decorators
=================
In addition to the Pseudo-Decorators/options described at the above link,
several enhancements have been made.
The directive will emit a message to the console at build-time if
code-execution resulted in an exception or warning. You can suppress these on
a per-block basis by specifying the :okexcept: or :okwarning: options:
.. code-block:: rst
.. ipython::
:okexcept:
:okwarning:
In [1]: 1/0
In [2]: # raise warning.
ToDo
----
- Turn the ad-hoc test() function into a real test suite.
- Break up ipython-specific functionality from matplotlib stuff into better
separated code.
Authors
-------
- John D Hunter: orignal author.
- Fernando Perez: refactoring, documentation, cleanups, port to 0.11.
- VáclavŠmilauer <eudoxos-AT-arcig.cz>: Prompt generalizations.
- Skipper Seabold, refactoring, cleanups, pure python addition
"""
from __future__ import print_function
#-----------------------------------------------------------------------------
# Imports
#-----------------------------------------------------------------------------
# Stdlib
import os
import re
import sys
import tempfile
import ast
import warnings
# To keep compatibility with various python versions
try:
from hashlib import md5
except ImportError:
from md5 import md5
# Third-party
import sphinx
from docutils.parsers.rst import directives
from docutils import nodes
from sphinx.util.compat import Directive
# Our own
from IPython import Config, InteractiveShell
from IPython.core.profiledir import ProfileDir
from IPython.utils import io
from IPython.utils.py3compat import PY3
if PY3:
from io import StringIO
else:
from StringIO import StringIO
#-----------------------------------------------------------------------------
# Globals
#-----------------------------------------------------------------------------
# for tokenizing blocks
COMMENT, INPUT, OUTPUT = range(3)
#-----------------------------------------------------------------------------
# Functions and class declarations
#-----------------------------------------------------------------------------
def block_parser(part, rgxin, rgxout, fmtin, fmtout):
"""
part is a string of ipython text, comprised of at most one
input, one ouput, comments, and blank lines. The block parser
parses the text into a list of::
blocks = [ (TOKEN0, data0), (TOKEN1, data1), ...]
where TOKEN is one of [COMMENT | INPUT | OUTPUT ] and
data is, depending on the type of token::
COMMENT : the comment string
INPUT: the (DECORATOR, INPUT_LINE, REST) where
DECORATOR: the input decorator (or None)
INPUT_LINE: the input as string (possibly multi-line)
REST : any stdout generated by the input line (not OUTPUT)
OUTPUT: the output string, possibly multi-line
"""
block = []
lines = part.split('\n')
N = len(lines)
i = 0
decorator = None
while 1:
if i==N:
# nothing left to parse -- the last line
break
line = lines[i]
i += 1
line_stripped = line.strip()
if line_stripped.startswith('#'):
block.append((COMMENT, line))
continue
if line_stripped.startswith('@'):
# we're assuming at most one decorator -- may need to
# rethink
decorator = line_stripped
continue
# does this look like an input line?
matchin = rgxin.match(line)
if matchin:
lineno, inputline = int(matchin.group(1)), matchin.group(2)
# the ....: continuation string
continuation = ' %s:'%''.join(['.']*(len(str(lineno))+2))
Nc = len(continuation)
# input lines can continue on for more than one line, if
# we have a '\' line continuation char or a function call
# echo line 'print'. The input line can only be
# terminated by the end of the block or an output line, so
# we parse out the rest of the input line if it is
# multiline as well as any echo text
rest = []
while i<N:
# look ahead; if the next line is blank, or a comment, or
# an output line, we're done
nextline = lines[i]
matchout = rgxout.match(nextline)
#print "nextline=%s, continuation=%s, starts=%s"%(nextline, continuation, nextline.startswith(continuation))
if matchout or nextline.startswith('#'):
break
elif nextline.startswith(continuation):
# The default ipython_rgx* treat the space following the colon as optional.
# However, If the space is there we must consume it or code
# employing the cython_magic extension will fail to execute.
#
# This works with the default ipython_rgx* patterns,
# If you modify them, YMMV.
nextline = nextline[Nc:]
if nextline and nextline[0] == ' ':
nextline = nextline[1:]
inputline += '\n' + nextline
else:
rest.append(nextline)
i+= 1
block.append((INPUT, (decorator, inputline, '\n'.join(rest))))
continue
# if it looks like an output line grab all the text to the end
# of the block
matchout = rgxout.match(line)
if matchout:
lineno, output = int(matchout.group(1)), matchout.group(2)
if i<N-1:
output = '\n'.join([output] + lines[i:])
block.append((OUTPUT, output))
break
return block
class EmbeddedSphinxShell(object):
"""An embedded IPython instance to run inside Sphinx"""
def __init__(self, exec_lines=None):
self.cout = StringIO()
if exec_lines is None:
exec_lines = []
# Create config object for IPython
config = Config()
config.InteractiveShell.autocall = False
config.InteractiveShell.autoindent = False
config.InteractiveShell.colors = 'NoColor'
# create a profile so instance history isn't saved
tmp_profile_dir = tempfile.mkdtemp(prefix='profile_')
profname = 'auto_profile_sphinx_build'
pdir = os.path.join(tmp_profile_dir,profname)
profile = ProfileDir.create_profile_dir(pdir)
# Create and initialize global ipython, but don't start its mainloop.
# This will persist across different EmbededSphinxShell instances.
IP = InteractiveShell.instance(config=config, profile_dir=profile)
# io.stdout redirect must be done after instantiating InteractiveShell
io.stdout = self.cout
io.stderr = self.cout
# For debugging, so we can see normal output, use this:
#from IPython.utils.io import Tee
#io.stdout = Tee(self.cout, channel='stdout') # dbg
#io.stderr = Tee(self.cout, channel='stderr') # dbg
# Store a few parts of IPython we'll need.
self.IP = IP
self.user_ns = self.IP.user_ns
self.user_global_ns = self.IP.user_global_ns
self.input = ''
self.output = ''
self.is_verbatim = False
self.is_doctest = False
self.is_suppress = False
# Optionally, provide more detailed information to shell.
# this is assigned by the SetUp method of IPythonDirective
# to point at itself.
#
# So, you can access handy things at self.directive.state
self.directive = None
# on the first call to the savefig decorator, we'll import
# pyplot as plt so we can make a call to the plt.gcf().savefig
self._pyplot_imported = False
# Prepopulate the namespace.
for line in exec_lines:
self.process_input_line(line, store_history=False)
def clear_cout(self):
self.cout.seek(0)
self.cout.truncate(0)
def process_input_line(self, line, store_history=True):
"""process the input, capturing stdout"""
stdout = sys.stdout
splitter = self.IP.input_splitter
try:
sys.stdout = self.cout
splitter.push(line)
more = splitter.push_accepts_more()
if not more:
source_raw = splitter.raw_reset()
self.IP.run_cell(source_raw, store_history=store_history)
finally:
sys.stdout = stdout
def process_image(self, decorator):
"""
# build out an image directive like
# .. image:: somefile.png
# :width 4in
#
# from an input like
# savefig somefile.png width=4in
"""
savefig_dir = self.savefig_dir
source_dir = self.source_dir
saveargs = decorator.split(' ')
filename = saveargs[1]
# insert relative path to image file in source
outfile = os.path.relpath(os.path.join(savefig_dir,filename),
source_dir)
imagerows = ['.. image:: %s'%outfile]
for kwarg in saveargs[2:]:
arg, val = kwarg.split('=')
arg = arg.strip()
val = val.strip()
imagerows.append(' :%s: %s'%(arg, val))
image_file = os.path.basename(outfile) # only return file name
image_directive = '\n'.join(imagerows)
return image_file, image_directive
# Callbacks for each type of token
def process_input(self, data, input_prompt, lineno):
"""
Process data block for INPUT token.
"""
decorator, input, rest = data
image_file = None
image_directive = None
is_verbatim = decorator=='@verbatim' or self.is_verbatim
is_doctest = (decorator is not None and \
decorator.startswith('@doctest')) or self.is_doctest
is_suppress = decorator=='@suppress' or self.is_suppress
is_okexcept = decorator=='@okexcept' or self.is_okexcept
is_okwarning = decorator=='@okwarning' or self.is_okwarning
is_savefig = decorator is not None and \
decorator.startswith('@savefig')
input_lines = input.split('\n')
if len(input_lines) > 1:
if input_lines[-1] != "":
input_lines.append('') # make sure there's a blank line
# so splitter buffer gets reset
continuation = ' %s:'%''.join(['.']*(len(str(lineno))+2))
if is_savefig:
image_file, image_directive = self.process_image(decorator)
ret = []
is_semicolon = False
# Hold the execution count, if requested to do so.
if is_suppress and self.hold_count:
store_history = False
else:
store_history = True
# Note: catch_warnings is not thread safe
with warnings.catch_warnings(record=True) as ws:
for i, line in enumerate(input_lines):
if line.endswith(';'):
is_semicolon = True
if i == 0:
# process the first input line
if is_verbatim:
self.process_input_line('')
self.IP.execution_count += 1 # increment it anyway
else:
# only submit the line in non-verbatim mode
self.process_input_line(line, store_history=store_history)
formatted_line = '%s %s'%(input_prompt, line)
else:
# process a continuation line
if not is_verbatim:
self.process_input_line(line, store_history=store_history)
formatted_line = '%s %s'%(continuation, line)
if not is_suppress:
ret.append(formatted_line)
if not is_suppress and len(rest.strip()) and is_verbatim:
# the "rest" is the standard output of the
# input, which needs to be added in
# verbatim mode
ret.append(rest)
self.cout.seek(0)
output = self.cout.read()
if not is_suppress and not is_semicolon:
ret.append(output)
elif is_semicolon: # get spacing right
ret.append('')
# context information
filename = "Unknown"
lineno = 0
if self.directive.state:
filename = self.directive.state.document.current_source
lineno = self.directive.state.document.current_line
# output any exceptions raised during execution to stdout
# unless :okexcept: has been specified.
if not is_okexcept and "Traceback" in output:
s = "\nException in %s at block ending on line %s\n" % (filename, lineno)
s += "Specify :okexcept: as an option in the ipython:: block to suppress this message\n"
sys.stdout.write('\n\n>>>' + ('-' * 73))
sys.stdout.write(s)
sys.stdout.write(output)
sys.stdout.write('<<<' + ('-' * 73) + '\n\n')
# output any warning raised during execution to stdout
# unless :okwarning: has been specified.
if not is_okwarning:
for w in ws:
s = "\nWarning in %s at block ending on line %s\n" % (filename, lineno)
s += "Specify :okwarning: as an option in the ipython:: block to suppress this message\n"
sys.stdout.write('\n\n>>>' + ('-' * 73))
sys.stdout.write(s)
sys.stdout.write(('-' * 76) + '\n')
s=warnings.formatwarning(w.message, w.category,
w.filename, w.lineno, w.line)
sys.stdout.write(s)
sys.stdout.write('<<<' + ('-' * 73) + '\n')
self.cout.truncate(0)
return (ret, input_lines, output, is_doctest, decorator, image_file,
image_directive)
def process_output(self, data, output_prompt,
input_lines, output, is_doctest, decorator, image_file):
"""
Process data block for OUTPUT token.
"""
TAB = ' ' * 4
if is_doctest and output is not None:
found = output
found = found.strip()
submitted = data.strip()
if self.directive is None:
source = 'Unavailable'
content = 'Unavailable'
else:
source = self.directive.state.document.current_source
content = self.directive.content
# Add tabs and join into a single string.
content = '\n'.join([TAB + line for line in content])
# Make sure the output contains the output prompt.
ind = found.find(output_prompt)
if ind < 0:
e = ('output does not contain output prompt\n\n'
'Document source: {0}\n\n'
'Raw content: \n{1}\n\n'
'Input line(s):\n{TAB}{2}\n\n'
'Output line(s):\n{TAB}{3}\n\n')
e = e.format(source, content, '\n'.join(input_lines),
repr(found), TAB=TAB)
raise RuntimeError(e)
found = found[len(output_prompt):].strip()
# Handle the actual doctest comparison.
if decorator.strip() == '@doctest':
# Standard doctest
if found != submitted:
e = ('doctest failure\n\n'
'Document source: {0}\n\n'
'Raw content: \n{1}\n\n'
'On input line(s):\n{TAB}{2}\n\n'
'we found output:\n{TAB}{3}\n\n'
'instead of the expected:\n{TAB}{4}\n\n')
e = e.format(source, content, '\n'.join(input_lines),
repr(found), repr(submitted), TAB=TAB)
raise RuntimeError(e)
else:
self.custom_doctest(decorator, input_lines, found, submitted)
def process_comment(self, data):
"""Process data fPblock for COMMENT token."""
if not self.is_suppress:
return [data]
def save_image(self, image_file):
"""
Saves the image file to disk.
"""
self.ensure_pyplot()
command = 'plt.gcf().savefig("%s")'%image_file
#print 'SAVEFIG', command # dbg
self.process_input_line('bookmark ipy_thisdir', store_history=False)
self.process_input_line('cd -b ipy_savedir', store_history=False)
self.process_input_line(command, store_history=False)
self.process_input_line('cd -b ipy_thisdir', store_history=False)
self.process_input_line('bookmark -d ipy_thisdir', store_history=False)
self.clear_cout()
def process_block(self, block):
"""
process block from the block_parser and return a list of processed lines
"""
ret = []
output = None
input_lines = None
lineno = self.IP.execution_count
input_prompt = self.promptin % lineno
output_prompt = self.promptout % lineno
image_file = None
image_directive = None
for token, data in block:
if token == COMMENT:
out_data = self.process_comment(data)
elif token == INPUT:
(out_data, input_lines, output, is_doctest, decorator,
image_file, image_directive) = \
self.process_input(data, input_prompt, lineno)
elif token == OUTPUT:
out_data = \
self.process_output(data, output_prompt,
input_lines, output, is_doctest,
decorator, image_file)
if out_data:
ret.extend(out_data)
# save the image files
if image_file is not None:
self.save_image(image_file)
return ret, image_directive
def ensure_pyplot(self):
"""
Ensures that pyplot has been imported into the embedded IPython shell.
Also, makes sure to set the backend appropriately if not set already.
"""
# We are here if the @figure pseudo decorator was used. Thus, it's
# possible that we could be here even if python_mplbackend were set to
# `None`. That's also strange and perhaps worthy of raising an
# exception, but for now, we just set the backend to 'agg'.
if not self._pyplot_imported:
if 'matplotlib.backends' not in sys.modules:
# Then ipython_matplotlib was set to None but there was a
# call to the @figure decorator (and ipython_execlines did
# not set a backend).
#raise Exception("No backend was set, but @figure was used!")
import matplotlib
matplotlib.use('agg')
# Always import pyplot into embedded shell.
self.process_input_line('import matplotlib.pyplot as plt',
store_history=False)
self._pyplot_imported = True
def process_pure_python(self, content):
"""
content is a list of strings. it is unedited directive content
This runs it line by line in the InteractiveShell, prepends
prompts as needed capturing stderr and stdout, then returns
the content as a list as if it were ipython code
"""
output = []
savefig = False # keep up with this to clear figure
multiline = False # to handle line continuation
multiline_start = None
fmtin = self.promptin
ct = 0
for lineno, line in enumerate(content):
line_stripped = line.strip()
if not len(line):
output.append(line)
continue
# handle decorators
if line_stripped.startswith('@'):
output.extend([line])
if 'savefig' in line:
savefig = True # and need to clear figure
continue
# handle comments
if line_stripped.startswith('#'):
output.extend([line])
continue
# deal with lines checking for multiline
continuation = u' %s:'% ''.join(['.']*(len(str(ct))+2))
if not multiline:
modified = u"%s %s" % (fmtin % ct, line_stripped)
output.append(modified)
ct += 1
try:
ast.parse(line_stripped)
output.append(u'')
except Exception: # on a multiline
multiline = True
multiline_start = lineno
else: # still on a multiline
modified = u'%s %s' % (continuation, line)
output.append(modified)
# if the next line is indented, it should be part of multiline
if len(content) > lineno + 1:
nextline = content[lineno + 1]
if len(nextline) - len(nextline.lstrip()) > 3:
continue
try:
mod = ast.parse(
'\n'.join(content[multiline_start:lineno+1]))
if isinstance(mod.body[0], ast.FunctionDef):
# check to see if we have the whole function
for element in mod.body[0].body:
if isinstance(element, ast.Return):
multiline = False
else:
output.append(u'')
multiline = False
except Exception:
pass
if savefig: # clear figure if plotted
self.ensure_pyplot()
self.process_input_line('plt.clf()', store_history=False)
self.clear_cout()
savefig = False
return output
def custom_doctest(self, decorator, input_lines, found, submitted):
"""
Perform a specialized doctest.
"""
from .custom_doctests import doctests
args = decorator.split()
doctest_type = args[1]
if doctest_type in doctests:
doctests[doctest_type](self, args, input_lines, found, submitted)
else:
e = "Invalid option to @doctest: {0}".format(doctest_type)
raise Exception(e)
class IPythonDirective(Directive):
has_content = True
required_arguments = 0
optional_arguments = 4 # python, suppress, verbatim, doctest
final_argumuent_whitespace = True
option_spec = { 'python': directives.unchanged,
'suppress' : directives.flag,
'verbatim' : directives.flag,
'doctest' : directives.flag,
'okexcept': directives.flag,
'okwarning': directives.flag
}
shell = None
seen_docs = set()
def get_config_options(self):
# contains sphinx configuration variables
config = self.state.document.settings.env.config
# get config variables to set figure output directory
confdir = self.state.document.settings.env.app.confdir
savefig_dir = config.ipython_savefig_dir
source_dir = os.path.dirname(self.state.document.current_source)
if savefig_dir is None:
savefig_dir = config.html_static_path
if isinstance(savefig_dir, list):
savefig_dir = savefig_dir[0] # safe to assume only one path?
savefig_dir = os.path.join(confdir, savefig_dir)
# get regex and prompt stuff
rgxin = config.ipython_rgxin
rgxout = config.ipython_rgxout
promptin = config.ipython_promptin
promptout = config.ipython_promptout
mplbackend = config.ipython_mplbackend
exec_lines = config.ipython_execlines
hold_count = config.ipython_holdcount
return (savefig_dir, source_dir, rgxin, rgxout,
promptin, promptout, mplbackend, exec_lines, hold_count)
def setup(self):
# Get configuration values.
(savefig_dir, source_dir, rgxin, rgxout, promptin, promptout,
mplbackend, exec_lines, hold_count) = self.get_config_options()
if self.shell is None:
# We will be here many times. However, when the
# EmbeddedSphinxShell is created, its interactive shell member
# is the same for each instance.
if mplbackend:
import matplotlib
# Repeated calls to use() will not hurt us since `mplbackend`
# is the same each time.
matplotlib.use(mplbackend)
# Must be called after (potentially) importing matplotlib and
# setting its backend since exec_lines might import pylab.
self.shell = EmbeddedSphinxShell(exec_lines)
# Store IPython directive to enable better error messages
self.shell.directive = self
# reset the execution count if we haven't processed this doc
#NOTE: this may be borked if there are multiple seen_doc tmp files
#check time stamp?
if not self.state.document.current_source in self.seen_docs:
self.shell.IP.history_manager.reset()
self.shell.IP.execution_count = 1
self.shell.IP.prompt_manager.width = 0
self.seen_docs.add(self.state.document.current_source)
# and attach to shell so we don't have to pass them around
self.shell.rgxin = rgxin
self.shell.rgxout = rgxout
self.shell.promptin = promptin
self.shell.promptout = promptout
self.shell.savefig_dir = savefig_dir
self.shell.source_dir = source_dir
self.shell.hold_count = hold_count
# setup bookmark for saving figures directory
self.shell.process_input_line('bookmark ipy_savedir %s'%savefig_dir,
store_history=False)
self.shell.clear_cout()
return rgxin, rgxout, promptin, promptout
def teardown(self):
# delete last bookmark
self.shell.process_input_line('bookmark -d ipy_savedir',
store_history=False)
self.shell.clear_cout()
def run(self):
debug = False
#TODO, any reason block_parser can't be a method of embeddable shell
# then we wouldn't have to carry these around
rgxin, rgxout, promptin, promptout = self.setup()
options = self.options
self.shell.is_suppress = 'suppress' in options
self.shell.is_doctest = 'doctest' in options
self.shell.is_verbatim = 'verbatim' in options
self.shell.is_okexcept = 'okexcept' in options
self.shell.is_okwarning = 'okwarning' in options
# handle pure python code
if 'python' in self.arguments:
content = self.content
self.content = self.shell.process_pure_python(content)
parts = '\n'.join(self.content).split('\n\n')
lines = ['.. code-block:: ipython', '']
figures = []
for part in parts:
block = block_parser(part, rgxin, rgxout, promptin, promptout)
if len(block):
rows, figure = self.shell.process_block(block)
for row in rows:
lines.extend([' %s'%line for line in row.split('\n')])
if figure is not None:
figures.append(figure)
for figure in figures:
lines.append('')
lines.extend(figure.split('\n'))
lines.append('')
if len(lines)>2:
if debug:
print('\n'.join(lines))
else:
# This has to do with input, not output. But if we comment
# these lines out, then no IPython code will appear in the
# final output.
self.state_machine.insert_input(
lines, self.state_machine.input_lines.source(0))
# cleanup
self.teardown()
return []
# Enable as a proper Sphinx directive
def setup(app):
setup.app = app
app.add_directive('ipython', IPythonDirective)
app.add_config_value('ipython_savefig_dir', None, 'env')
app.add_config_value('ipython_rgxin',
re.compile('In \[(\d+)\]:\s?(.*)\s*'), 'env')
app.add_config_value('ipython_rgxout',
re.compile('Out\[(\d+)\]:\s?(.*)\s*'), 'env')
app.add_config_value('ipython_promptin', 'In [%d]:', 'env')
app.add_config_value('ipython_promptout', 'Out[%d]:', 'env')
# We could just let matplotlib pick whatever is specified as the default
# backend in the matplotlibrc file, but this would cause issues if the
# backend didn't work in headless environments. For this reason, 'agg'
# is a good default backend choice.
app.add_config_value('ipython_mplbackend', 'agg', 'env')
# If the user sets this config value to `None`, then EmbeddedSphinxShell's
# __init__ method will treat it as [].
execlines = ['import numpy as np', 'import matplotlib.pyplot as plt']
app.add_config_value('ipython_execlines', execlines, 'env')
app.add_config_value('ipython_holdcount', True, 'env')
# Simple smoke test, needs to be converted to a proper automatic test.
def test():
examples = [
r"""
In [9]: pwd
Out[9]: '/home/jdhunter/py4science/book'
In [10]: cd bookdata/
/home/jdhunter/py4science/book/bookdata
In [2]: from pylab import *
In [2]: ion()
In [3]: im = imread('stinkbug.png')
@savefig mystinkbug.png width=4in
In [4]: imshow(im)
Out[4]: <matplotlib.image.AxesImage object at 0x39ea850>
""",
r"""
In [1]: x = 'hello world'
# string methods can be
# used to alter the string
@doctest
In [2]: x.upper()
Out[2]: 'HELLO WORLD'
@verbatim
In [3]: x.st<TAB>
x.startswith x.strip
""",
r"""
In [130]: url = 'http://ichart.finance.yahoo.com/table.csv?s=CROX\
.....: &d=9&e=22&f=2009&g=d&a=1&br=8&c=2006&ignore=.csv'
In [131]: print url.split('&')
['http://ichart.finance.yahoo.com/table.csv?s=CROX', 'd=9', 'e=22', 'f=2009', 'g=d', 'a=1', 'b=8', 'c=2006', 'ignore=.csv']
In [60]: import urllib
""",
r"""\
In [133]: import numpy.random
@suppress
In [134]: numpy.random.seed(2358)
@doctest
In [135]: numpy.random.rand(10,2)
Out[135]:
array([[ 0.64524308, 0.59943846],
[ 0.47102322, 0.8715456 ],
[ 0.29370834, 0.74776844],
[ 0.99539577, 0.1313423 ],
[ 0.16250302, 0.21103583],
[ 0.81626524, 0.1312433 ],
[ 0.67338089, 0.72302393],
[ 0.7566368 , 0.07033696],
[ 0.22591016, 0.77731835],
[ 0.0072729 , 0.34273127]])
""",
r"""
In [106]: print x
jdh
In [109]: for i in range(10):
.....: print i
.....:
.....:
0
1
2
3
4
5
6
7
8
9
""",
r"""
In [144]: from pylab import *
In [145]: ion()
# use a semicolon to suppress the output
@savefig test_hist.png width=4in
In [151]: hist(np.random.randn(10000), 100);
@savefig test_plot.png width=4in
In [151]: plot(np.random.randn(10000), 'o');
""",
r"""
# use a semicolon to suppress the output
In [151]: plt.clf()
@savefig plot_simple.png width=4in
In [151]: plot([1,2,3])
@savefig hist_simple.png width=4in
In [151]: hist(np.random.randn(10000), 100);
""",
r"""
# update the current fig
In [151]: ylabel('number')
In [152]: title('normal distribution')
@savefig hist_with_text.png
In [153]: grid(True)
@doctest float
In [154]: 0.1 + 0.2
Out[154]: 0.3
@doctest float
In [155]: np.arange(16).reshape(4,4)
Out[155]:
array([[ 0, 1, 2, 3],
[ 4, 5, 6, 7],
[ 8, 9, 10, 11],
[12, 13, 14, 15]])
In [1]: x = np.arange(16, dtype=float).reshape(4,4)
In [2]: x[0,0] = np.inf
In [3]: x[0,1] = np.nan
@doctest float
In [4]: x
Out[4]:
array([[ inf, nan, 2., 3.],
[ 4., 5., 6., 7.],
[ 8., 9., 10., 11.],
[ 12., 13., 14., 15.]])
""",
]
# skip local-file depending first example:
examples = examples[1:]
#ipython_directive.DEBUG = True # dbg
#options = dict(suppress=True) # dbg
options = dict()
for example in examples:
content = example.split('\n')
IPythonDirective('debug', arguments=None, options=options,
content=content, lineno=0,
content_offset=None, block_text=None,
state=None, state_machine=None,
)
# Run test suite as a script
if __name__=='__main__':
if not os.path.isdir('_static'):
os.mkdir('_static')
test()
print('All OK? Check figures in _static/')