Overview ======== This document describes the steps required to install IPython. IPython is organized into a number of subpackages, each of which has its own dependencies. All of the subpackages come with IPython, so you don't need to download and install them separately. However, to use a given subpackage, you will need to install all of its dependencies. Please let us know if you have problems installing IPython or any of its dependencies. Officially, IPython requires Python version 2.6 or 2.7. There is an experimental port of IPython for Python3 `on GitHub `_ .. warning:: Officially, IPython supports Python versions 2.6 and 2.7. IPython 0.11 has a hard syntax dependency on 2.6, and will no longer work on Python <= 2.5. Some of the installation approaches use the :mod:`setuptools` package and its :command:`easy_install` command line program. In many scenarios, this provides the most simple method of installing IPython and its dependencies. It is not required though. More information about :mod:`setuptools` can be found on its website. .. note:: On Windows, IPython *does* depend on :mod:`setuptools`, and it is recommended that you install the :mod:`distribute` package, which improves :mod:`setuptools` and fixes various bugs. We hope to remove this dependency in 0.12. More general information about installing Python packages can be found in Python's documentation at http://www.python.org/doc/. Quickstart ========== If you have :mod:`setuptools` installed and you are on OS X or Linux (not Windows), the following will download and install IPython *and* the main optional dependencies: .. code-block:: bash $ easy_install ipython[zmq,test] This will get pyzmq, which is needed for IPython's parallel computing features as well as the nose package, which will enable you to run IPython's test suite. To run IPython's test suite, use the :command:`iptest` command: .. code-block:: bash $ iptest Read on for more specific details and instructions for Windows. Installing IPython itself ========================= Given a properly built Python, the basic interactive IPython shell will work with no external dependencies. However, some Python distributions (particularly on Windows and OS X), don't come with a working :mod:`readline` module. The IPython shell will work without :mod:`readline`, but will lack many features that users depend on, such as tab completion and command line editing. If you install IPython with :mod:`setuptools`, (e.g. with `easy_install`), then the appropriate :mod:`readline` for your platform will be installed. See below for details of how to make sure you have a working :mod:`readline`. Installation using easy_install ------------------------------- If you have :mod:`setuptools` installed, the easiest way of getting IPython is to simple use :command:`easy_install`: .. code-block:: bash $ easy_install ipython That's it. Installation from source ------------------------ If you don't want to use :command:`easy_install`, or don't have it installed, just grab the latest stable build of IPython from `here `_. Then do the following: .. code-block:: bash $ tar -xzf ipython.tar.gz $ cd ipython $ python setup.py install If you are installing to a location (like ``/usr/local``) that requires higher permissions, you may need to run the last command with :command:`sudo`. Windows ------- .. note:: On Windows, IPython requires :mod:`setuptools` or :mod:`distribute`. We hope to remove this dependency in 0.12. There are a few caveats for Windows users. The main issue is that a basic ``python setup.py install`` approach won't create ``.bat`` file or Start Menu shortcuts, which most users want. To get an installation with these, you can use any of the following alternatives: 1. Install using :command:`easy_install`. 2. Install using our binary ``.exe`` Windows installer, which can be found `here `_ 3. Install from source, but using :mod:`setuptools` (``python setupegg.py install``). IPython by default runs in a terminal window, but the normal terminal application supplied by Microsoft Windows is very primitive. You may want to download the excellent and free Console_ application instead, which is a far superior tool. You can even configure Console to give you by default an IPython tab, which is very convenient to create new IPython sessions directly from the working terminal. .. _Console: http://sourceforge.net/projects/console Note for Windows 64 bit users: you may have difficulties with the stock installer on 64 bit systems; in this case (since we currently do not have 64 bit builds of the Windows installer) your best bet is to install from source with the setuptools method indicated in #3 above. See `this bug report`_ for further details. .. _this bug report: https://bugs.launchpad.net/ipython/+bug/382214 Installing the development version ---------------------------------- It is also possible to install the development version of IPython from our `Git `_ source code repository. To do this you will need to have Git installed on your system. Then just do: .. code-block:: bash $ git clone https://github.com/ipython/ipython.git $ cd ipython $ python setup.py install Again, this last step on Windows won't create ``.bat`` files or Start Menu shortcuts, so you will have to use one of the other approaches listed above. Some users want to be able to follow the development branch as it changes. If you have :mod:`setuptools` installed, this is easy. Simply replace the last step by: .. code-block:: bash $ python setupegg.py develop This creates links in the right places and installs the command line script to the appropriate places. Then, if you want to update your IPython at any time, just do: .. code-block:: bash $ git pull Basic optional dependencies =========================== There are a number of basic optional dependencies that most users will want to get. These are: * readline (for command line editing, tab completion, etc.) * nose (to run the IPython test suite) * pexpect (to use things like irunner) If you are comfortable installing these things yourself, have at it, otherwise read on for more details. readline -------- In principle, all Python distributions should come with a working :mod:`readline` module. But, reality is not quite that simple. There are two common situations where you won't have a working :mod:`readline` module: * If you are using the built-in Python on Mac OS X. * If you are running Windows, which doesn't have a :mod:`readline` module. When IPython is installed with :mod:`setuptools`, (e.g. with `easy_install`), readline is added as a dependency on OS X, and PyReadline on Windows, and will be installed on your system. However, if you do not use setuptools, you may have to install one of these packages yourself. On OS X, the built-in Python doesn't not have :mod:`readline` because of license issues. Starting with OS X 10.5 (Leopard), Apple's built-in Python has a BSD-licensed not-quite-compatible readline replacement. As of IPython 0.9, many of the issues related to the differences between readline and libedit seem to have been resolved. While you may find libedit sufficient, we have occasional reports of bugs with it and several developers who use OS X as their main environment consider libedit unacceptable for productive, regular use with IPython. Therefore, we *strongly* recommend that on OS X you get the full :mod:`readline` module. We will *not* consider completion/history problems to be bugs for IPython if you are using libedit. To get a working :mod:`readline` module, just do (with :mod:`setuptools` installed): .. code-block:: bash $ easy_install readline .. note:: Other Python distributions on OS X (such as fink, MacPorts and the official python.org binaries) already have readline installed so you likely don't have to do this step. If needed, the readline egg can be build and installed from source (see the wiki page at http://ipython.scipy.org/moin/InstallationOSXLeopard). On Windows, you will need the PyReadline module. PyReadline is a separate, Windows only implementation of readline that uses native Windows calls through :mod:`ctypes`. The easiest way of installing PyReadline is you use the binary installer available `here `_. nose ---- To run the IPython test suite you will need the :mod:`nose` package. Nose provides a great way of sniffing out and running all of the IPython tests. The simplest way of getting nose, is to use :command:`easy_install`: .. code-block:: bash $ easy_install nose Another way of getting this is to do: .. code-block:: bash $ easy_install ipython[test] For more installation options, see the `nose website `_. Once you have nose installed, you can run IPython's test suite using the iptest command: .. code-block:: bash $ iptest pexpect ------- The pexpect_ package is used in IPython's :command:`irunner` script, as well as for managing subprocesses. IPython now includes a version of pexpect in :mod:`IPython.external`, but if you have installed pexpect, IPython will use that instead. On Unix platforms (including OS X), just do: .. code-block:: bash $ easy_install pexpect Windows users are out of luck as pexpect does not run there. Dependencies for IPython.parallel (parallel computing) ====================================================== :mod:`IPython.kernel` has been replaced by :mod:`IPython.parallel`, which uses ZeroMQ for all communication. IPython.parallel provides a nice architecture for parallel computing. The main focus of this architecture is on interactive parallel computing. These features require just one package: PyZMQ. See the next section for PyZMQ details. On a Unix style platform (including OS X), if you want to use :mod:`setuptools`, you can just do: .. code-block:: bash $ easy_install ipython[zmq] # will include pyzmq Security in IPython.parallel is provided by SSH tunnels. By default, Linux and OSX clients will use the shell ssh command, but on Windows, we also support tunneling with paramiko_. Dependencies for IPython.zmq ============================ pyzmq ----- IPython 0.11 introduced some new functionality, including a two-process execution model using ZeroMQ_ for communication. The Python bindings to ZeroMQ are found in the PyZMQ_ project, which is easy_install-able once you have ZeroMQ installed. If you are on Python 2.6 or 2.7 on OSX, or 2.7 on Windows, pyzmq has eggs that include ZeroMQ itself. IPython.zmq depends on pyzmq >= 2.1.4. Dependencies for the IPython QT console ======================================= pyzmq ----- Like the :mod:`IPython.parallel` package, the QT Console requires ZeroMQ and PyZMQ. Qt -- Also with 0.11, a new GUI was added using the work in :mod:`IPython.zmq`, which can be launched with ``ipython qtconsole``. The GUI is built on Qt, and works with either PyQt, which can be installed from the `PyQt website `_, or `PySide `_, from Nokia. pygments -------- The syntax-highlighting in ``ipython qtconsole`` is done with the pygments_ project, which is easy_install-able. .. _installnotebook: Dependencies for the IPython HTML notebook ========================================== The IPython notebook is a notebook-style web interface to IPython and can be started withe command ``ipython notebook``. pyzmq ----- Like the :mod:`IPython.parallel` and :mod:`IPython.frontend.qt.console` packages, the HTML notebook requires ZeroMQ and PyZMQ. Tornado ------- The IPython notebook uses the Tornado_ project for its HTTP server. Tornado 2.1 is required, in order to support current versions of browsers, due to an update to the websocket protocol. MathJax ------- The IPython notebook uses the MathJax_ Javascript library for rendering LaTeX in web browsers. Because MathJax is large, we don't include it with IPython. Normally IPython will load MathJax from a CDN, but if you have a slow network connection, or want to use LaTeX without an internet connection at all, we do include a utility to aid in downloading MathJax and installing it into the proper location:: from IPython.external.mathjax import install_mathjax install_mathjax() This function does require write access to the IPython install directory, so if you have a system-wide Python install, it may need to be done from a ``sudo python`` session. Browser Compatibility --------------------- The notebook uses WebSockets and the flexible box model. These features are available in the following browsers: * Chrome. * Safari. * Firefox 4 and 5. These browsers have WebSocket support, but it is disabled by default. You can enable it by entering ``about:config`` in the URL bar and then setting ``network.websocket.enabled`` and ``network.websocket.override-security-block`` to ``true``. * Firefox 6. Starting with version 6, Firefox has WebSocket support enabled by default. Internet Explorer 9 does not support WebSockets or the flexible box model, but these features should appear in Internet Explorer 10. .. _ZeroMQ: http://www.zeromq.org .. _PyZMQ: https://github.com/zeromq/pyzmq .. _paramiko: https://github.com/robey/paramiko .. _pygments: http://pygments.org .. _pexpect: http://www.noah.org/wiki/Pexpect .. _Tornado: http://www.tornadoweb.org .. _MathJax: http://www.mathjax.org