# -*- coding: utf-8 -*- """ IPython -- An enhanced Interactive Python Requires Python 2.3 or newer. This file contains all the classes and helper functions specific to IPython. $Id: iplib.py 2266 2007-04-22 18:55:48Z jstenar $ """ #***************************************************************************** # Copyright (C) 2001 Janko Hauser and # Copyright (C) 2001-2006 Fernando Perez. # # Distributed under the terms of the BSD License. The full license is in # the file COPYING, distributed as part of this software. # # Note: this code originally subclassed code.InteractiveConsole from the # Python standard library. Over time, all of that class has been copied # verbatim here for modifications which could not be accomplished by # subclassing. At this point, there are no dependencies at all on the code # module anymore (it is not even imported). The Python License (sec. 2) # allows for this, but it's always nice to acknowledge credit where credit is # due. #***************************************************************************** #**************************************************************************** # Modules and globals from IPython import Release __author__ = '%s <%s>\n%s <%s>' % \ ( Release.authors['Janko'] + Release.authors['Fernando'] ) __license__ = Release.license __version__ = Release.version # Python standard modules import __main__ import __builtin__ import StringIO import bdb import cPickle as pickle import codeop import exceptions import glob import inspect import keyword import new import os import pydoc import re import shutil import string import sys import tempfile import traceback import types import pickleshare from sets import Set from pprint import pprint, pformat # IPython's own modules import IPython from IPython import Debugger,OInspect,PyColorize,ultraTB from IPython.ColorANSI import ColorScheme,ColorSchemeTable # too long names from IPython.FakeModule import FakeModule from IPython.Itpl import Itpl,itpl,printpl,ItplNS,itplns from IPython.Logger import Logger from IPython.Magic import Magic from IPython.Prompts import CachedOutput from IPython.ipstruct import Struct from IPython.background_jobs import BackgroundJobManager from IPython.usage import cmd_line_usage,interactive_usage from IPython.genutils import * from IPython.strdispatch import StrDispatch import IPython.ipapi # Globals # store the builtin raw_input globally, and use this always, in case user code # overwrites it (like wx.py.PyShell does) raw_input_original = raw_input # compiled regexps for autoindent management dedent_re = re.compile(r'^\s+raise|^\s+return|^\s+pass') #**************************************************************************** # Some utility function definitions ini_spaces_re = re.compile(r'^(\s+)') def num_ini_spaces(strng): """Return the number of initial spaces in a string""" ini_spaces = ini_spaces_re.match(strng) if ini_spaces: return ini_spaces.end() else: return 0 def softspace(file, newvalue): """Copied from code.py, to remove the dependency""" oldvalue = 0 try: oldvalue = file.softspace except AttributeError: pass try: file.softspace = newvalue except (AttributeError, TypeError): # "attribute-less object" or "read-only attributes" pass return oldvalue #**************************************************************************** # Local use exceptions class SpaceInInput(exceptions.Exception): pass #**************************************************************************** # Local use classes class Bunch: pass class Undefined: pass class Quitter(object): """Simple class to handle exit, similar to Python 2.5's. It handles exiting in an ipython-safe manner, which the one in Python 2.5 doesn't do (obviously, since it doesn't know about ipython).""" def __init__(self,shell,name): self.shell = shell self.name = name def __repr__(self): return 'Type %s() to exit.' % self.name __str__ = __repr__ def __call__(self): self.shell.exit() class InputList(list): """Class to store user input. It's basically a list, but slices return a string instead of a list, thus allowing things like (assuming 'In' is an instance): exec In[4:7] or exec In[5:9] + In[14] + In[21:25]""" def __getslice__(self,i,j): return ''.join(list.__getslice__(self,i,j)) class SyntaxTB(ultraTB.ListTB): """Extension which holds some state: the last exception value""" def __init__(self,color_scheme = 'NoColor'): ultraTB.ListTB.__init__(self,color_scheme) self.last_syntax_error = None def __call__(self, etype, value, elist): self.last_syntax_error = value ultraTB.ListTB.__call__(self,etype,value,elist) def clear_err_state(self): """Return the current error state and clear it""" e = self.last_syntax_error self.last_syntax_error = None return e #**************************************************************************** # Main IPython class # FIXME: the Magic class is a mixin for now, and will unfortunately remain so # until a full rewrite is made. I've cleaned all cross-class uses of # attributes and methods, but too much user code out there relies on the # equlity %foo == __IP.magic_foo, so I can't actually remove the mixin usage. # # But at least now, all the pieces have been separated and we could, in # principle, stop using the mixin. This will ease the transition to the # chainsaw branch. # For reference, the following is the list of 'self.foo' uses in the Magic # class as of 2005-12-28. These are names we CAN'T use in the main ipython # class, to prevent clashes. # ['self.__class__', 'self.__dict__', 'self._inspect', 'self._ofind', # 'self.arg_err', 'self.extract_input', 'self.format_', 'self.lsmagic', # 'self.magic_', 'self.options_table', 'self.parse', 'self.shell', # 'self.value'] class InteractiveShell(object,Magic): """An enhanced console for Python.""" # class attribute to indicate whether the class supports threads or not. # Subclasses with thread support should override this as needed. isthreaded = False def __init__(self,name,usage=None,rc=Struct(opts=None,args=None), user_ns = None,user_global_ns=None,banner2='', custom_exceptions=((),None),embedded=False): # log system self.logger = Logger(self,logfname='ipython_log.py',logmode='rotate') # some minimal strict typechecks. For some core data structures, I # want actual basic python types, not just anything that looks like # one. This is especially true for namespaces. for ns in (user_ns,user_global_ns): if ns is not None and type(ns) != types.DictType: raise TypeError,'namespace must be a dictionary' # Job manager (for jobs run as background threads) self.jobs = BackgroundJobManager() # Store the actual shell's name self.name = name # We need to know whether the instance is meant for embedding, since # global/local namespaces need to be handled differently in that case self.embedded = embedded # command compiler self.compile = codeop.CommandCompiler() # User input buffer self.buffer = [] # Default name given in compilation of code self.filename = '' # Install our own quitter instead of the builtins. For python2.3-2.4, # this brings in behavior like 2.5, and for 2.5 it's identical. __builtin__.exit = Quitter(self,'exit') __builtin__.quit = Quitter(self,'quit') # Make an empty namespace, which extension writers can rely on both # existing and NEVER being used by ipython itself. This gives them a # convenient location for storing additional information and state # their extensions may require, without fear of collisions with other # ipython names that may develop later. self.meta = Struct() # Create the namespace where the user will operate. user_ns is # normally the only one used, and it is passed to the exec calls as # the locals argument. But we do carry a user_global_ns namespace # given as the exec 'globals' argument, This is useful in embedding # situations where the ipython shell opens in a context where the # distinction between locals and globals is meaningful. # FIXME. For some strange reason, __builtins__ is showing up at user # level as a dict instead of a module. This is a manual fix, but I # should really track down where the problem is coming from. Alex # Schmolck reported this problem first. # A useful post by Alex Martelli on this topic: # Re: inconsistent value from __builtins__ # Von: Alex Martelli # Datum: Freitag 01 Oktober 2004 04:45:34 nachmittags/abends # Gruppen: comp.lang.python # Michael Hohn wrote: # > >>> print type(builtin_check.get_global_binding('__builtins__')) # > # > >>> print type(__builtins__) # > # > Is this difference in return value intentional? # Well, it's documented that '__builtins__' can be either a dictionary # or a module, and it's been that way for a long time. Whether it's # intentional (or sensible), I don't know. In any case, the idea is # that if you need to access the built-in namespace directly, you # should start with "import __builtin__" (note, no 's') which will # definitely give you a module. Yeah, it's somewhat confusing:-(. # These routines return properly built dicts as needed by the rest of # the code, and can also be used by extension writers to generate # properly initialized namespaces. user_ns = IPython.ipapi.make_user_ns(user_ns) user_global_ns = IPython.ipapi.make_user_global_ns(user_global_ns) # Assign namespaces # This is the namespace where all normal user variables live self.user_ns = user_ns # Embedded instances require a separate namespace for globals. # Normally this one is unused by non-embedded instances. self.user_global_ns = user_global_ns # A namespace to keep track of internal data structures to prevent # them from cluttering user-visible stuff. Will be updated later self.internal_ns = {} # Namespace of system aliases. Each entry in the alias # table must be a 2-tuple of the form (N,name), where N is the number # of positional arguments of the alias. self.alias_table = {} # A table holding all the namespaces IPython deals with, so that # introspection facilities can search easily. self.ns_table = {'user':user_ns, 'user_global':user_global_ns, 'alias':self.alias_table, 'internal':self.internal_ns, 'builtin':__builtin__.__dict__ } # The user namespace MUST have a pointer to the shell itself. self.user_ns[name] = self # We need to insert into sys.modules something that looks like a # module but which accesses the IPython namespace, for shelve and # pickle to work interactively. Normally they rely on getting # everything out of __main__, but for embedding purposes each IPython # instance has its own private namespace, so we can't go shoving # everything into __main__. # note, however, that we should only do this for non-embedded # ipythons, which really mimic the __main__.__dict__ with their own # namespace. Embedded instances, on the other hand, should not do # this because they need to manage the user local/global namespaces # only, but they live within a 'normal' __main__ (meaning, they # shouldn't overtake the execution environment of the script they're # embedded in). if not embedded: try: main_name = self.user_ns['__name__'] except KeyError: raise KeyError,'user_ns dictionary MUST have a "__name__" key' else: #print "pickle hack in place" # dbg #print 'main_name:',main_name # dbg sys.modules[main_name] = FakeModule(self.user_ns) # List of input with multi-line handling. # Fill its zero entry, user counter starts at 1 self.input_hist = InputList(['\n']) # This one will hold the 'raw' input history, without any # pre-processing. This will allow users to retrieve the input just as # it was exactly typed in by the user, with %hist -r. self.input_hist_raw = InputList(['\n']) # list of visited directories try: self.dir_hist = [os.getcwd()] except IOError, e: self.dir_hist = [] # dict of output history self.output_hist = {} # Get system encoding at startup time. Certain terminals (like Emacs # under Win32 have it set to None, and we need to have a known valid # encoding to use in the raw_input() method self.stdin_encoding = sys.stdin.encoding or 'ascii' # dict of things NOT to alias (keywords, builtins and some magics) no_alias = {} no_alias_magics = ['cd','popd','pushd','dhist','alias','unalias'] for key in keyword.kwlist + no_alias_magics: no_alias[key] = 1 no_alias.update(__builtin__.__dict__) self.no_alias = no_alias # make global variables for user access to these self.user_ns['_ih'] = self.input_hist self.user_ns['_oh'] = self.output_hist self.user_ns['_dh'] = self.dir_hist # user aliases to input and output histories self.user_ns['In'] = self.input_hist self.user_ns['Out'] = self.output_hist # Object variable to store code object waiting execution. This is # used mainly by the multithreaded shells, but it can come in handy in # other situations. No need to use a Queue here, since it's a single # item which gets cleared once run. self.code_to_run = None # escapes for automatic behavior on the command line self.ESC_SHELL = '!' self.ESC_HELP = '?' self.ESC_MAGIC = '%' self.ESC_QUOTE = ',' self.ESC_QUOTE2 = ';' self.ESC_PAREN = '/' # And their associated handlers self.esc_handlers = {self.ESC_PAREN : self.handle_auto, self.ESC_QUOTE : self.handle_auto, self.ESC_QUOTE2 : self.handle_auto, self.ESC_MAGIC : self.handle_magic, self.ESC_HELP : self.handle_help, self.ESC_SHELL : self.handle_shell_escape, } # class initializations Magic.__init__(self,self) # Python source parser/formatter for syntax highlighting pyformat = PyColorize.Parser().format self.pycolorize = lambda src: pyformat(src,'str',self.rc['colors']) # hooks holds pointers used for user-side customizations self.hooks = Struct() self.strdispatchers = {} # Set all default hooks, defined in the IPython.hooks module. hooks = IPython.hooks for hook_name in hooks.__all__: # default hooks have priority 100, i.e. low; user hooks should have # 0-100 priority self.set_hook(hook_name,getattr(hooks,hook_name), 100) #print "bound hook",hook_name # Flag to mark unconditional exit self.exit_now = False self.usage_min = """\ An enhanced console for Python. Some of its features are: - Readline support if the readline library is present. - Tab completion in the local namespace. - Logging of input, see command-line options. - System shell escape via ! , eg !ls. - Magic commands, starting with a % (like %ls, %pwd, %cd, etc.) - Keeps track of locally defined variables via %who, %whos. - Show object information with a ? eg ?x or x? (use ?? for more info). """ if usage: self.usage = usage else: self.usage = self.usage_min # Storage self.rc = rc # This will hold all configuration information self.pager = 'less' # temporary files used for various purposes. Deleted at exit. self.tempfiles = [] # Keep track of readline usage (later set by init_readline) self.has_readline = False # template for logfile headers. It gets resolved at runtime by the # logstart method. self.loghead_tpl = \ """#log# Automatic Logger file. *** THIS MUST BE THE FIRST LINE *** #log# DO NOT CHANGE THIS LINE OR THE TWO BELOW #log# opts = %s #log# args = %s #log# It is safe to make manual edits below here. #log#----------------------------------------------------------------------- """ # for pushd/popd management try: self.home_dir = get_home_dir() except HomeDirError,msg: fatal(msg) self.dir_stack = [os.getcwd().replace(self.home_dir,'~')] # Functions to call the underlying shell. # The first is similar to os.system, but it doesn't return a value, # and it allows interpolation of variables in the user's namespace. self.system = lambda cmd: \ shell(self.var_expand(cmd,depth=2), header=self.rc.system_header, verbose=self.rc.system_verbose) # These are for getoutput and getoutputerror: self.getoutput = lambda cmd: \ getoutput(self.var_expand(cmd,depth=2), header=self.rc.system_header, verbose=self.rc.system_verbose) self.getoutputerror = lambda cmd: \ getoutputerror(self.var_expand(cmd,depth=2), header=self.rc.system_header, verbose=self.rc.system_verbose) # RegExp for splitting line contents into pre-char//first # word-method//rest. For clarity, each group in on one line. # WARNING: update the regexp if the above escapes are changed, as they # are hardwired in. # Don't get carried away with trying to make the autocalling catch too # much: it's better to be conservative rather than to trigger hidden # evals() somewhere and end up causing side effects. self.line_split = re.compile(r'^(\s*[,;/]?\s*)' r'([\?\w\.]+\w*\s*)' r'(\(?.*$)') self.shell_line_split = re.compile(r'^(\s*)' r'(\S*\s*)' r'(\(?.*$)') # A simpler regexp used as a fallback if the above doesn't work. This # one is more conservative in how it partitions the input. This code # can probably be cleaned up to do everything with just one regexp, but # I'm afraid of breaking something; do it once the unit tests are in # place. self.line_split_fallback = re.compile(r'^(\s*)' r'([%\!\?\w\.]*)' r'(.*)') # Original re, keep around for a while in case changes break something #self.line_split = re.compile(r'(^[\s*!\?%,/]?)' # r'(\s*[\?\w\.]+\w*\s*)' # r'(\(?.*$)') # RegExp to identify potential function names self.re_fun_name = re.compile(r'[a-zA-Z_]([a-zA-Z0-9_.]*) *$') # RegExp to exclude strings with this start from autocalling. In # particular, all binary operators should be excluded, so that if foo # is callable, foo OP bar doesn't become foo(OP bar), which is # invalid. The characters '!=()' don't need to be checked for, as the # _prefilter routine explicitely does so, to catch direct calls and # rebindings of existing names. # Warning: the '-' HAS TO BE AT THE END of the first group, otherwise # it affects the rest of the group in square brackets. self.re_exclude_auto = re.compile(r'^[<>,&^\|\*/\+-]' '|^is |^not |^in |^and |^or ') # try to catch also methods for stuff in lists/tuples/dicts: off # (experimental). For this to work, the line_split regexp would need # to be modified so it wouldn't break things at '['. That line is # nasty enough that I shouldn't change it until I can test it _well_. #self.re_fun_name = re.compile (r'[a-zA-Z_]([a-zA-Z0-9_.\[\]]*) ?$') # keep track of where we started running (mainly for crash post-mortem) self.starting_dir = os.getcwd() # Various switches which can be set self.CACHELENGTH = 5000 # this is cheap, it's just text self.BANNER = "Python %(version)s on %(platform)s\n" % sys.__dict__ self.banner2 = banner2 # TraceBack handlers: # Syntax error handler. self.SyntaxTB = SyntaxTB(color_scheme='NoColor') # The interactive one is initialized with an offset, meaning we always # want to remove the topmost item in the traceback, which is our own # internal code. Valid modes: ['Plain','Context','Verbose'] self.InteractiveTB = ultraTB.AutoFormattedTB(mode = 'Plain', color_scheme='NoColor', tb_offset = 1) # IPython itself shouldn't crash. This will produce a detailed # post-mortem if it does. But we only install the crash handler for # non-threaded shells, the threaded ones use a normal verbose reporter # and lose the crash handler. This is because exceptions in the main # thread (such as in GUI code) propagate directly to sys.excepthook, # and there's no point in printing crash dumps for every user exception. if self.isthreaded: ipCrashHandler = ultraTB.FormattedTB() else: from IPython import CrashHandler ipCrashHandler = CrashHandler.IPythonCrashHandler(self) self.set_crash_handler(ipCrashHandler) # and add any custom exception handlers the user may have specified self.set_custom_exc(*custom_exceptions) # indentation management self.autoindent = False self.indent_current_nsp = 0 # Make some aliases automatically # Prepare list of shell aliases to auto-define if os.name == 'posix': auto_alias = ('mkdir mkdir', 'rmdir rmdir', 'mv mv -i','rm rm -i','cp cp -i', 'cat cat','less less','clear clear', # a better ls 'ls ls -F', # long ls 'll ls -lF') # Extra ls aliases with color, which need special treatment on BSD # variants ls_extra = ( # color ls 'lc ls -F -o --color', # ls normal files only 'lf ls -F -o --color %l | grep ^-', # ls symbolic links 'lk ls -F -o --color %l | grep ^l', # directories or links to directories, 'ldir ls -F -o --color %l | grep /$', # things which are executable 'lx ls -F -o --color %l | grep ^-..x', ) # The BSDs don't ship GNU ls, so they don't understand the # --color switch out of the box if 'bsd' in sys.platform: ls_extra = ( # ls normal files only 'lf ls -lF | grep ^-', # ls symbolic links 'lk ls -lF | grep ^l', # directories or links to directories, 'ldir ls -lF | grep /$', # things which are executable 'lx ls -lF | grep ^-..x', ) auto_alias = auto_alias + ls_extra elif os.name in ['nt','dos']: auto_alias = ('dir dir /on', 'ls dir /on', 'ddir dir /ad /on', 'ldir dir /ad /on', 'mkdir mkdir','rmdir rmdir','echo echo', 'ren ren','cls cls','copy copy') else: auto_alias = () self.auto_alias = [s.split(None,1) for s in auto_alias] # Call the actual (public) initializer self.init_auto_alias() # Produce a public API instance self.api = IPython.ipapi.IPApi(self) # track which builtins we add, so we can clean up later self.builtins_added = {} # This method will add the necessary builtins for operation, but # tracking what it did via the builtins_added dict. self.add_builtins() # end __init__ def var_expand(self,cmd,depth=0): """Expand python variables in a string. The depth argument indicates how many frames above the caller should be walked to look for the local namespace where to expand variables. The global namespace for expansion is always the user's interactive namespace. """ return str(ItplNS(cmd.replace('#','\#'), self.user_ns, # globals # Skip our own frame in searching for locals: sys._getframe(depth+1).f_locals # locals )) def pre_config_initialization(self): """Pre-configuration init method This is called before the configuration files are processed to prepare the services the config files might need. self.rc already has reasonable default values at this point. """ rc = self.rc self.db = pickleshare.PickleShareDB(rc.ipythondir + "/db") def post_config_initialization(self): """Post configuration init method This is called after the configuration files have been processed to 'finalize' the initialization.""" rc = self.rc # Object inspector self.inspector = OInspect.Inspector(OInspect.InspectColors, PyColorize.ANSICodeColors, 'NoColor', rc.object_info_string_level) # Load readline proper if rc.readline: self.init_readline() # local shortcut, this is used a LOT self.log = self.logger.log # Initialize cache, set in/out prompts and printing system self.outputcache = CachedOutput(self, rc.cache_size, rc.pprint, input_sep = rc.separate_in, output_sep = rc.separate_out, output_sep2 = rc.separate_out2, ps1 = rc.prompt_in1, ps2 = rc.prompt_in2, ps_out = rc.prompt_out, pad_left = rc.prompts_pad_left) # user may have over-ridden the default print hook: try: self.outputcache.__class__.display = self.hooks.display except AttributeError: pass # I don't like assigning globally to sys, because it means when # embedding instances, each embedded instance overrides the previous # choice. But sys.displayhook seems to be called internally by exec, # so I don't see a way around it. We first save the original and then # overwrite it. self.sys_displayhook = sys.displayhook sys.displayhook = self.outputcache # Set user colors (don't do it in the constructor above so that it # doesn't crash if colors option is invalid) self.magic_colors(rc.colors) # Set calling of pdb on exceptions self.call_pdb = rc.pdb # Load user aliases for alias in rc.alias: self.magic_alias(alias) self.hooks.late_startup_hook() batchrun = False for batchfile in [path(arg) for arg in self.rc.args if arg.lower().endswith('.ipy')]: if not batchfile.isfile(): print "No such batch file:", batchfile continue self.api.runlines(batchfile.text()) batchrun = True if batchrun: self.exit_now = True def add_builtins(self): """Store ipython references into the builtin namespace. Some parts of ipython operate via builtins injected here, which hold a reference to IPython itself.""" # TODO: deprecate all except _ip; 'jobs' should be installed # by an extension and the rest are under _ip, ipalias is redundant builtins_new = dict(__IPYTHON__ = self, ip_set_hook = self.set_hook, jobs = self.jobs, ipmagic = wrap_deprecated(self.ipmagic,'_ip.magic()'), ipalias = wrap_deprecated(self.ipalias), ipsystem = wrap_deprecated(self.ipsystem,'_ip.system()'), _ip = self.api ) for biname,bival in builtins_new.items(): try: # store the orignal value so we can restore it self.builtins_added[biname] = __builtin__.__dict__[biname] except KeyError: # or mark that it wasn't defined, and we'll just delete it at # cleanup self.builtins_added[biname] = Undefined __builtin__.__dict__[biname] = bival # Keep in the builtins a flag for when IPython is active. We set it # with setdefault so that multiple nested IPythons don't clobber one # another. Each will increase its value by one upon being activated, # which also gives us a way to determine the nesting level. __builtin__.__dict__.setdefault('__IPYTHON__active',0) def clean_builtins(self): """Remove any builtins which might have been added by add_builtins, or restore overwritten ones to their previous values.""" for biname,bival in self.builtins_added.items(): if bival is Undefined: del __builtin__.__dict__[biname] else: __builtin__.__dict__[biname] = bival self.builtins_added.clear() def set_hook(self,name,hook, priority = 50, str_key = None, re_key = None): """set_hook(name,hook) -> sets an internal IPython hook. IPython exposes some of its internal API as user-modifiable hooks. By adding your function to one of these hooks, you can modify IPython's behavior to call at runtime your own routines.""" # At some point in the future, this should validate the hook before it # accepts it. Probably at least check that the hook takes the number # of args it's supposed to. f = new.instancemethod(hook,self,self.__class__) # check if the hook is for strdispatcher first if str_key is not None: sdp = self.strdispatchers.get(name, StrDispatch()) sdp.add_s(str_key, f, priority ) self.strdispatchers[name] = sdp return if re_key is not None: sdp = self.strdispatchers.get(name, StrDispatch()) sdp.add_re(re.compile(re_key), f, priority ) self.strdispatchers[name] = sdp return dp = getattr(self.hooks, name, None) if name not in IPython.hooks.__all__: print "Warning! Hook '%s' is not one of %s" % (name, IPython.hooks.__all__ ) if not dp: dp = IPython.hooks.CommandChainDispatcher() try: dp.add(f,priority) except AttributeError: # it was not commandchain, plain old func - replace dp = f setattr(self.hooks,name, dp) #setattr(self.hooks,name,new.instancemethod(hook,self,self.__class__)) def set_crash_handler(self,crashHandler): """Set the IPython crash handler. This must be a callable with a signature suitable for use as sys.excepthook.""" # Install the given crash handler as the Python exception hook sys.excepthook = crashHandler # The instance will store a pointer to this, so that runtime code # (such as magics) can access it. This is because during the # read-eval loop, it gets temporarily overwritten (to deal with GUI # frameworks). self.sys_excepthook = sys.excepthook def set_custom_exc(self,exc_tuple,handler): """set_custom_exc(exc_tuple,handler) Set a custom exception handler, which will be called if any of the exceptions in exc_tuple occur in the mainloop (specifically, in the runcode() method. Inputs: - exc_tuple: a *tuple* of valid exceptions to call the defined handler for. It is very important that you use a tuple, and NOT A LIST here, because of the way Python's except statement works. If you only want to trap a single exception, use a singleton tuple: exc_tuple == (MyCustomException,) - handler: this must be defined as a function with the following basic interface: def my_handler(self,etype,value,tb). This will be made into an instance method (via new.instancemethod) of IPython itself, and it will be called if any of the exceptions listed in the exc_tuple are caught. If the handler is None, an internal basic one is used, which just prints basic info. WARNING: by putting in your own exception handler into IPython's main execution loop, you run a very good chance of nasty crashes. This facility should only be used if you really know what you are doing.""" assert type(exc_tuple)==type(()) , \ "The custom exceptions must be given AS A TUPLE." def dummy_handler(self,etype,value,tb): print '*** Simple custom exception handler ***' print 'Exception type :',etype print 'Exception value:',value print 'Traceback :',tb print 'Source code :','\n'.join(self.buffer) if handler is None: handler = dummy_handler self.CustomTB = new.instancemethod(handler,self,self.__class__) self.custom_exceptions = exc_tuple def set_custom_completer(self,completer,pos=0): """set_custom_completer(completer,pos=0) Adds a new custom completer function. The position argument (defaults to 0) is the index in the completers list where you want the completer to be inserted.""" newcomp = new.instancemethod(completer,self.Completer, self.Completer.__class__) self.Completer.matchers.insert(pos,newcomp) def set_completer(self): """reset readline's completer to be our own.""" self.readline.set_completer(self.Completer.complete) def _get_call_pdb(self): return self._call_pdb def _set_call_pdb(self,val): if val not in (0,1,False,True): raise ValueError,'new call_pdb value must be boolean' # store value in instance self._call_pdb = val # notify the actual exception handlers self.InteractiveTB.call_pdb = val if self.isthreaded: try: self.sys_excepthook.call_pdb = val except: warn('Failed to activate pdb for threaded exception handler') call_pdb = property(_get_call_pdb,_set_call_pdb,None, 'Control auto-activation of pdb at exceptions') # These special functions get installed in the builtin namespace, to # provide programmatic (pure python) access to magics, aliases and system # calls. This is important for logging, user scripting, and more. # We are basically exposing, via normal python functions, the three # mechanisms in which ipython offers special call modes (magics for # internal control, aliases for direct system access via pre-selected # names, and !cmd for calling arbitrary system commands). def ipmagic(self,arg_s): """Call a magic function by name. Input: a string containing the name of the magic function to call and any additional arguments to be passed to the magic. ipmagic('name -opt foo bar') is equivalent to typing at the ipython prompt: In[1]: %name -opt foo bar To call a magic without arguments, simply use ipmagic('name'). This provides a proper Python function to call IPython's magics in any valid Python code you can type at the interpreter, including loops and compound statements. It is added by IPython to the Python builtin namespace upon initialization.""" args = arg_s.split(' ',1) magic_name = args[0] magic_name = magic_name.lstrip(self.ESC_MAGIC) try: magic_args = args[1] except IndexError: magic_args = '' fn = getattr(self,'magic_'+magic_name,None) if fn is None: error("Magic function `%s` not found." % magic_name) else: magic_args = self.var_expand(magic_args,1) return fn(magic_args) def ipalias(self,arg_s): """Call an alias by name. Input: a string containing the name of the alias to call and any additional arguments to be passed to the magic. ipalias('name -opt foo bar') is equivalent to typing at the ipython prompt: In[1]: name -opt foo bar To call an alias without arguments, simply use ipalias('name'). This provides a proper Python function to call IPython's aliases in any valid Python code you can type at the interpreter, including loops and compound statements. It is added by IPython to the Python builtin namespace upon initialization.""" args = arg_s.split(' ',1) alias_name = args[0] try: alias_args = args[1] except IndexError: alias_args = '' if alias_name in self.alias_table: self.call_alias(alias_name,alias_args) else: error("Alias `%s` not found." % alias_name) def ipsystem(self,arg_s): """Make a system call, using IPython.""" self.system(arg_s) def complete(self,text): """Return a sorted list of all possible completions on text. Inputs: - text: a string of text to be completed on. This is a wrapper around the completion mechanism, similar to what readline does at the command line when the TAB key is hit. By exposing it as a method, it can be used by other non-readline environments (such as GUIs) for text completion. Simple usage example: In [1]: x = 'hello' In [2]: __IP.complete('x.l') Out[2]: ['x.ljust', 'x.lower', 'x.lstrip']""" complete = self.Completer.complete state = 0 # use a dict so we get unique keys, since ipyhton's multiple # completers can return duplicates. When we make 2.4 a requirement, # start using sets instead, which are faster. comps = {} while True: newcomp = complete(text,state,line_buffer=text) if newcomp is None: break comps[newcomp] = 1 state += 1 outcomps = comps.keys() outcomps.sort() return outcomps def set_completer_frame(self, frame=None): if frame: self.Completer.namespace = frame.f_locals self.Completer.global_namespace = frame.f_globals else: self.Completer.namespace = self.user_ns self.Completer.global_namespace = self.user_global_ns def init_auto_alias(self): """Define some aliases automatically. These are ALL parameter-less aliases""" for alias,cmd in self.auto_alias: self.alias_table[alias] = (0,cmd) def alias_table_validate(self,verbose=0): """Update information about the alias table. In particular, make sure no Python keywords/builtins are in it.""" no_alias = self.no_alias for k in self.alias_table.keys(): if k in no_alias: del self.alias_table[k] if verbose: print ("Deleting alias <%s>, it's a Python " "keyword or builtin." % k) def set_autoindent(self,value=None): """Set the autoindent flag, checking for readline support. If called with no arguments, it acts as a toggle.""" if not self.has_readline: if os.name == 'posix': warn("The auto-indent feature requires the readline library") self.autoindent = 0 return if value is None: self.autoindent = not self.autoindent else: self.autoindent = value def rc_set_toggle(self,rc_field,value=None): """Set or toggle a field in IPython's rc config. structure. If called with no arguments, it acts as a toggle. If called with a non-existent field, the resulting AttributeError exception will propagate out.""" rc_val = getattr(self.rc,rc_field) if value is None: value = not rc_val setattr(self.rc,rc_field,value) def user_setup(self,ipythondir,rc_suffix,mode='install'): """Install the user configuration directory. Can be called when running for the first time or to upgrade the user's .ipython/ directory with the mode parameter. Valid modes are 'install' and 'upgrade'.""" def wait(): try: raw_input("Please press to start IPython.") except EOFError: print >> Term.cout print '*'*70 cwd = os.getcwd() # remember where we started glb = glob.glob print '*'*70 if mode == 'install': print \ """Welcome to IPython. I will try to create a personal configuration directory where you can customize many aspects of IPython's functionality in:\n""" else: print 'I am going to upgrade your configuration in:' print ipythondir rcdirend = os.path.join('IPython','UserConfig') cfg = lambda d: os.path.join(d,rcdirend) try: rcdir = filter(os.path.isdir,map(cfg,sys.path))[0] except IOError: warning = """ Installation error. IPython's directory was not found. Check the following: The ipython/IPython directory should be in a directory belonging to your PYTHONPATH environment variable (that is, it should be in a directory belonging to sys.path). You can copy it explicitly there or just link to it. IPython will proceed with builtin defaults. """ warn(warning) wait() return if mode == 'install': try: shutil.copytree(rcdir,ipythondir) os.chdir(ipythondir) rc_files = glb("ipythonrc*") for rc_file in rc_files: os.rename(rc_file,rc_file+rc_suffix) except: warning = """ There was a problem with the installation: %s Try to correct it or contact the developers if you think it's a bug. IPython will proceed with builtin defaults.""" % sys.exc_info()[1] warn(warning) wait() return elif mode == 'upgrade': try: os.chdir(ipythondir) except: print """ Can not upgrade: changing to directory %s failed. Details: %s """ % (ipythondir,sys.exc_info()[1]) wait() return else: sources = glb(os.path.join(rcdir,'[A-Za-z]*')) for new_full_path in sources: new_filename = os.path.basename(new_full_path) if new_filename.startswith('ipythonrc'): new_filename = new_filename + rc_suffix # The config directory should only contain files, skip any # directories which may be there (like CVS) if os.path.isdir(new_full_path): continue if os.path.exists(new_filename): old_file = new_filename+'.old' if os.path.exists(old_file): os.remove(old_file) os.rename(new_filename,old_file) shutil.copy(new_full_path,new_filename) else: raise ValueError,'unrecognized mode for install:',`mode` # Fix line-endings to those native to each platform in the config # directory. try: os.chdir(ipythondir) except: print """ Problem: changing to directory %s failed. Details: %s Some configuration files may have incorrect line endings. This should not cause any problems during execution. """ % (ipythondir,sys.exc_info()[1]) wait() else: for fname in glb('ipythonrc*'): try: native_line_ends(fname,backup=0) except IOError: pass if mode == 'install': print """ Successful installation! Please read the sections 'Initial Configuration' and 'Quick Tips' in the IPython manual (there are both HTML and PDF versions supplied with the distribution) to make sure that your system environment is properly configured to take advantage of IPython's features. Important note: the configuration system has changed! The old system is still in place, but its setting may be partly overridden by the settings in "~/.ipython/ipy_user_conf.py" config file. Please take a look at the file if some of the new settings bother you. """ else: print """ Successful upgrade! All files in your directory: %(ipythondir)s which would have been overwritten by the upgrade were backed up with a .old extension. If you had made particular customizations in those files you may want to merge them back into the new files.""" % locals() wait() os.chdir(cwd) # end user_setup() def atexit_operations(self): """This will be executed at the time of exit. Saving of persistent data should be performed here. """ #print '*** IPython exit cleanup ***' # dbg # input history self.savehist() # Cleanup all tempfiles left around for tfile in self.tempfiles: try: os.unlink(tfile) except OSError: pass # save the "persistent data" catch-all dictionary self.hooks.shutdown_hook() def savehist(self): """Save input history to a file (via readline library).""" try: self.readline.write_history_file(self.histfile) except: print 'Unable to save IPython command history to file: ' + \ `self.histfile` def reloadhist(self): """Reload the input history from disk file.""" if self.has_readline: self.readline.clear_history() self.readline.read_history_file(self.shell.histfile) def history_saving_wrapper(self, func): """ Wrap func for readline history saving Convert func into callable that saves & restores history around the call """ if not self.has_readline: return func def wrapper(): self.savehist() try: func() finally: readline.read_history_file(self.histfile) return wrapper def pre_readline(self): """readline hook to be used at the start of each line. Currently it handles auto-indent only.""" #debugx('self.indent_current_nsp','pre_readline:') self.readline.insert_text(self.indent_current_str()) def init_readline(self): """Command history completion/saving/reloading.""" import IPython.rlineimpl as readline if not readline.have_readline: self.has_readline = 0 self.readline = None # no point in bugging windows users with this every time: warn('Readline services not available on this platform.') else: sys.modules['readline'] = readline import atexit from IPython.completer import IPCompleter self.Completer = IPCompleter(self, self.user_ns, self.user_global_ns, self.rc.readline_omit__names, self.alias_table) sdisp = self.strdispatchers.get('complete_command', StrDispatch()) self.strdispatchers['complete_command'] = sdisp self.Completer.custom_completers = sdisp # Platform-specific configuration if os.name == 'nt': self.readline_startup_hook = readline.set_pre_input_hook else: self.readline_startup_hook = readline.set_startup_hook # Load user's initrc file (readline config) inputrc_name = os.environ.get('INPUTRC') if inputrc_name is None: home_dir = get_home_dir() if home_dir is not None: inputrc_name = os.path.join(home_dir,'.inputrc') if os.path.isfile(inputrc_name): try: readline.read_init_file(inputrc_name) except: warn('Problems reading readline initialization file <%s>' % inputrc_name) self.has_readline = 1 self.readline = readline # save this in sys so embedded copies can restore it properly sys.ipcompleter = self.Completer.complete self.set_completer() # Configure readline according to user's prefs for rlcommand in self.rc.readline_parse_and_bind: readline.parse_and_bind(rlcommand) # remove some chars from the delimiters list delims = readline.get_completer_delims() delims = delims.translate(string._idmap, self.rc.readline_remove_delims) readline.set_completer_delims(delims) # otherwise we end up with a monster history after a while: readline.set_history_length(1000) try: #print '*** Reading readline history' # dbg readline.read_history_file(self.histfile) except IOError: pass # It doesn't exist yet. atexit.register(self.atexit_operations) del atexit # Configure auto-indent for all platforms self.set_autoindent(self.rc.autoindent) def ask_yes_no(self,prompt,default=True): if self.rc.quiet: return True return ask_yes_no(prompt,default) def _should_recompile(self,e): """Utility routine for edit_syntax_error""" if e.filename in ('','','', '','', None): return False try: if (self.rc.autoedit_syntax and not self.ask_yes_no('Return to editor to correct syntax error? ' '[Y/n] ','y')): return False except EOFError: return False def int0(x): try: return int(x) except TypeError: return 0 # always pass integer line and offset values to editor hook self.hooks.fix_error_editor(e.filename, int0(e.lineno),int0(e.offset),e.msg) return True def edit_syntax_error(self): """The bottom half of the syntax error handler called in the main loop. Loop until syntax error is fixed or user cancels. """ while self.SyntaxTB.last_syntax_error: # copy and clear last_syntax_error err = self.SyntaxTB.clear_err_state() if not self._should_recompile(err): return try: # may set last_syntax_error again if a SyntaxError is raised self.safe_execfile(err.filename,self.user_ns) except: self.showtraceback() else: try: f = file(err.filename) try: sys.displayhook(f.read()) finally: f.close() except: self.showtraceback() def showsyntaxerror(self, filename=None): """Display the syntax error that just occurred. This doesn't display a stack trace because there isn't one. If a filename is given, it is stuffed in the exception instead of what was there before (because Python's parser always uses "" when reading from a string). """ etype, value, last_traceback = sys.exc_info() # See note about these variables in showtraceback() below sys.last_type = etype sys.last_value = value sys.last_traceback = last_traceback if filename and etype is SyntaxError: # Work hard to stuff the correct filename in the exception try: msg, (dummy_filename, lineno, offset, line) = value except: # Not the format we expect; leave it alone pass else: # Stuff in the right filename try: # Assume SyntaxError is a class exception value = SyntaxError(msg, (filename, lineno, offset, line)) except: # If that failed, assume SyntaxError is a string value = msg, (filename, lineno, offset, line) self.SyntaxTB(etype,value,[]) def debugger(self,force=False): """Call the pydb/pdb debugger. Keywords: - force(False): by default, this routine checks the instance call_pdb flag and does not actually invoke the debugger if the flag is false. The 'force' option forces the debugger to activate even if the flag is false. """ if not (force or self.call_pdb): return if not hasattr(sys,'last_traceback'): error('No traceback has been produced, nothing to debug.') return # use pydb if available if Debugger.has_pydb: from pydb import pm else: # fallback to our internal debugger pm = lambda : self.InteractiveTB.debugger(force=True) self.history_saving_wrapper(pm)() def showtraceback(self,exc_tuple = None,filename=None,tb_offset=None): """Display the exception that just occurred. If nothing is known about the exception, this is the method which should be used throughout the code for presenting user tracebacks, rather than directly invoking the InteractiveTB object. A specific showsyntaxerror() also exists, but this method can take care of calling it if needed, so unless you are explicitly catching a SyntaxError exception, don't try to analyze the stack manually and simply call this method.""" # Though this won't be called by syntax errors in the input line, # there may be SyntaxError cases whith imported code. if exc_tuple is None: etype, value, tb = sys.exc_info() else: etype, value, tb = exc_tuple if etype is SyntaxError: self.showsyntaxerror(filename) else: # WARNING: these variables are somewhat deprecated and not # necessarily safe to use in a threaded environment, but tools # like pdb depend on their existence, so let's set them. If we # find problems in the field, we'll need to revisit their use. sys.last_type = etype sys.last_value = value sys.last_traceback = tb if etype in self.custom_exceptions: self.CustomTB(etype,value,tb) else: self.InteractiveTB(etype,value,tb,tb_offset=tb_offset) if self.InteractiveTB.call_pdb and self.has_readline: # pdb mucks up readline, fix it back self.set_completer() def mainloop(self,banner=None): """Creates the local namespace and starts the mainloop. If an optional banner argument is given, it will override the internally created default banner.""" if self.rc.c: # Emulate Python's -c option self.exec_init_cmd() if banner is None: if not self.rc.banner: banner = '' # banner is string? Use it directly! elif isinstance(self.rc.banner,basestring): banner = self.rc.banner else: banner = self.BANNER+self.banner2 self.interact(banner) def exec_init_cmd(self): """Execute a command given at the command line. This emulates Python's -c option.""" #sys.argv = ['-c'] self.push(self.rc.c) def embed_mainloop(self,header='',local_ns=None,global_ns=None,stack_depth=0): """Embeds IPython into a running python program. Input: - header: An optional header message can be specified. - local_ns, global_ns: working namespaces. If given as None, the IPython-initialized one is updated with __main__.__dict__, so that program variables become visible but user-specific configuration remains possible. - stack_depth: specifies how many levels in the stack to go to looking for namespaces (when local_ns and global_ns are None). This allows an intermediate caller to make sure that this function gets the namespace from the intended level in the stack. By default (0) it will get its locals and globals from the immediate caller. Warning: it's possible to use this in a program which is being run by IPython itself (via %run), but some funny things will happen (a few globals get overwritten). In the future this will be cleaned up, as there is no fundamental reason why it can't work perfectly.""" # Get locals and globals from caller if local_ns is None or global_ns is None: call_frame = sys._getframe(stack_depth).f_back if local_ns is None: local_ns = call_frame.f_locals if global_ns is None: global_ns = call_frame.f_globals # Update namespaces and fire up interpreter # The global one is easy, we can just throw it in self.user_global_ns = global_ns # but the user/local one is tricky: ipython needs it to store internal # data, but we also need the locals. We'll copy locals in the user # one, but will track what got copied so we can delete them at exit. # This is so that a later embedded call doesn't see locals from a # previous call (which most likely existed in a separate scope). local_varnames = local_ns.keys() self.user_ns.update(local_ns) # Patch for global embedding to make sure that things don't overwrite # user globals accidentally. Thanks to Richard # FIXME. Test this a bit more carefully (the if.. is new) if local_ns is None and global_ns is None: self.user_global_ns.update(__main__.__dict__) # make sure the tab-completer has the correct frame information, so it # actually completes using the frame's locals/globals self.set_completer_frame() # before activating the interactive mode, we need to make sure that # all names in the builtin namespace needed by ipython point to # ourselves, and not to other instances. self.add_builtins() self.interact(header) # now, purge out the user namespace from anything we might have added # from the caller's local namespace delvar = self.user_ns.pop for var in local_varnames: delvar(var,None) # and clean builtins we may have overridden self.clean_builtins() def interact(self, banner=None): """Closely emulate the interactive Python console. The optional banner argument specify the banner to print before the first interaction; by default it prints a banner similar to the one printed by the real Python interpreter, followed by the current class name in parentheses (so as not to confuse this with the real interpreter -- since it's so close!). """ if self.exit_now: # batch run -> do not interact return cprt = 'Type "copyright", "credits" or "license" for more information.' if banner is None: self.write("Python %s on %s\n%s\n(%s)\n" % (sys.version, sys.platform, cprt, self.__class__.__name__)) else: self.write(banner) more = 0 # Mark activity in the builtins __builtin__.__dict__['__IPYTHON__active'] += 1 # exit_now is set by a call to %Exit or %Quit while not self.exit_now: if more: prompt = self.hooks.generate_prompt(True) if self.autoindent: self.readline_startup_hook(self.pre_readline) else: prompt = self.hooks.generate_prompt(False) try: line = self.raw_input(prompt,more) if self.exit_now: # quick exit on sys.std[in|out] close break if self.autoindent: self.readline_startup_hook(None) except KeyboardInterrupt: self.write('\nKeyboardInterrupt\n') self.resetbuffer() # keep cache in sync with the prompt counter: self.outputcache.prompt_count -= 1 if self.autoindent: self.indent_current_nsp = 0 more = 0 except EOFError: if self.autoindent: self.readline_startup_hook(None) self.write('\n') self.exit() except bdb.BdbQuit: warn('The Python debugger has exited with a BdbQuit exception.\n' 'Because of how pdb handles the stack, it is impossible\n' 'for IPython to properly format this particular exception.\n' 'IPython will resume normal operation.') except: # exceptions here are VERY RARE, but they can be triggered # asynchronously by signal handlers, for example. self.showtraceback() else: more = self.push(line) if (self.SyntaxTB.last_syntax_error and self.rc.autoedit_syntax): self.edit_syntax_error() # We are off again... __builtin__.__dict__['__IPYTHON__active'] -= 1 def excepthook(self, etype, value, tb): """One more defense for GUI apps that call sys.excepthook. GUI frameworks like wxPython trap exceptions and call sys.excepthook themselves. I guess this is a feature that enables them to keep running after exceptions that would otherwise kill their mainloop. This is a bother for IPython which excepts to catch all of the program exceptions with a try: except: statement. Normally, IPython sets sys.excepthook to a CrashHandler instance, so if any app directly invokes sys.excepthook, it will look to the user like IPython crashed. In order to work around this, we can disable the CrashHandler and replace it with this excepthook instead, which prints a regular traceback using our InteractiveTB. In this fashion, apps which call sys.excepthook will generate a regular-looking exception from IPython, and the CrashHandler will only be triggered by real IPython crashes. This hook should be used sparingly, only in places which are not likely to be true IPython errors. """ self.showtraceback((etype,value,tb),tb_offset=0) def expand_aliases(self,fn,rest): """ Expand multiple levels of aliases: if: alias foo bar /tmp alias baz foo then: baz huhhahhei -> bar /tmp huhhahhei """ line = fn + " " + rest done = Set() while 1: pre,fn,rest = self.split_user_input(line, pattern = self.shell_line_split) # print "!",fn,"!",rest # dbg if fn in self.alias_table: if fn in done: warn("Cyclic alias definition, repeated '%s'" % fn) return "" done.add(fn) l2 = self.transform_alias(fn,rest) # dir -> dir # print "alias",line, "->",l2 #dbg if l2 == line: break # ls -> ls -F should not recurse forever if l2.split(None,1)[0] == line.split(None,1)[0]: line = l2 break line=l2 # print "al expand to",line #dbg else: break return line def transform_alias(self, alias,rest=''): """ Transform alias to system command string. """ nargs,cmd = self.alias_table[alias] if ' ' in cmd and os.path.isfile(cmd): cmd = '"%s"' % cmd # Expand the %l special to be the user's input line if cmd.find('%l') >= 0: cmd = cmd.replace('%l',rest) rest = '' if nargs==0: # Simple, argument-less aliases cmd = '%s %s' % (cmd,rest) else: # Handle aliases with positional arguments args = rest.split(None,nargs) if len(args)< nargs: error('Alias <%s> requires %s arguments, %s given.' % (alias,nargs,len(args))) return None cmd = '%s %s' % (cmd % tuple(args[:nargs]),' '.join(args[nargs:])) # Now call the macro, evaluating in the user's namespace #print 'new command: <%r>' % cmd # dbg return cmd def call_alias(self,alias,rest=''): """Call an alias given its name and the rest of the line. This is only used to provide backwards compatibility for users of ipalias(), use of which is not recommended for anymore.""" # Now call the macro, evaluating in the user's namespace cmd = self.transform_alias(alias, rest) try: self.system(cmd) except: self.showtraceback() def indent_current_str(self): """return the current level of indentation as a string""" return self.indent_current_nsp * ' ' def autoindent_update(self,line): """Keep track of the indent level.""" #debugx('line') #debugx('self.indent_current_nsp') if self.autoindent: if line: inisp = num_ini_spaces(line) if inisp < self.indent_current_nsp: self.indent_current_nsp = inisp if line[-1] == ':': self.indent_current_nsp += 4 elif dedent_re.match(line): self.indent_current_nsp -= 4 else: self.indent_current_nsp = 0 def runlines(self,lines): """Run a string of one or more lines of source. This method is capable of running a string containing multiple source lines, as if they had been entered at the IPython prompt. Since it exposes IPython's processing machinery, the given strings can contain magic calls (%magic), special shell access (!cmd), etc.""" # We must start with a clean buffer, in case this is run from an # interactive IPython session (via a magic, for example). self.resetbuffer() lines = lines.split('\n') more = 0 for line in lines: # skip blank lines so we don't mess up the prompt counter, but do # NOT skip even a blank line if we are in a code block (more is # true) if line or more: more = self.push(self.prefilter(line,more)) # IPython's runsource returns None if there was an error # compiling the code. This allows us to stop processing right # away, so the user gets the error message at the right place. if more is None: break # final newline in case the input didn't have it, so that the code # actually does get executed if more: self.push('\n') def runsource(self, source, filename='', symbol='single'): """Compile and run some source in the interpreter. Arguments are as for compile_command(). One several things can happen: 1) The input is incorrect; compile_command() raised an exception (SyntaxError or OverflowError). A syntax traceback will be printed by calling the showsyntaxerror() method. 2) The input is incomplete, and more input is required; compile_command() returned None. Nothing happens. 3) The input is complete; compile_command() returned a code object. The code is executed by calling self.runcode() (which also handles run-time exceptions, except for SystemExit). The return value is: - True in case 2 - False in the other cases, unless an exception is raised, where None is returned instead. This can be used by external callers to know whether to continue feeding input or not. The return value can be used to decide whether to use sys.ps1 or sys.ps2 to prompt the next line.""" # if the source code has leading blanks, add 'if 1:\n' to it # this allows execution of indented pasted code. It is tempting # to add '\n' at the end of source to run commands like ' a=1' # directly, but this fails for more complicated scenarios if source[:1] in [' ', '\t']: source = 'if 1:\n%s' % source try: code = self.compile(source,filename,symbol) except (OverflowError, SyntaxError, ValueError): # Case 1 self.showsyntaxerror(filename) return None if code is None: # Case 2 return True # Case 3 # We store the code object so that threaded shells and # custom exception handlers can access all this info if needed. # The source corresponding to this can be obtained from the # buffer attribute as '\n'.join(self.buffer). self.code_to_run = code # now actually execute the code object if self.runcode(code) == 0: return False else: return None def runcode(self,code_obj): """Execute a code object. When an exception occurs, self.showtraceback() is called to display a traceback. Return value: a flag indicating whether the code to be run completed successfully: - 0: successful execution. - 1: an error occurred. """ # Set our own excepthook in case the user code tries to call it # directly, so that the IPython crash handler doesn't get triggered old_excepthook,sys.excepthook = sys.excepthook, self.excepthook # we save the original sys.excepthook in the instance, in case config # code (such as magics) needs access to it. self.sys_excepthook = old_excepthook outflag = 1 # happens in more places, so it's easier as default try: try: # Embedded instances require separate global/local namespaces # so they can see both the surrounding (local) namespace and # the module-level globals when called inside another function. if self.embedded: exec code_obj in self.user_global_ns, self.user_ns # Normal (non-embedded) instances should only have a single # namespace for user code execution, otherwise functions won't # see interactive top-level globals. else: exec code_obj in self.user_ns finally: # Reset our crash handler in place sys.excepthook = old_excepthook except SystemExit: self.resetbuffer() self.showtraceback() warn("Type %exit or %quit to exit IPython " "(%Exit or %Quit do so unconditionally).",level=1) except self.custom_exceptions: etype,value,tb = sys.exc_info() self.CustomTB(etype,value,tb) except: self.showtraceback() else: outflag = 0 if softspace(sys.stdout, 0): print # Flush out code object which has been run (and source) self.code_to_run = None return outflag def push(self, line): """Push a line to the interpreter. The line should not have a trailing newline; it may have internal newlines. The line is appended to a buffer and the interpreter's runsource() method is called with the concatenated contents of the buffer as source. If this indicates that the command was executed or invalid, the buffer is reset; otherwise, the command is incomplete, and the buffer is left as it was after the line was appended. The return value is 1 if more input is required, 0 if the line was dealt with in some way (this is the same as runsource()). """ # autoindent management should be done here, and not in the # interactive loop, since that one is only seen by keyboard input. We # need this done correctly even for code run via runlines (which uses # push). #print 'push line: <%s>' % line # dbg for subline in line.splitlines(): self.autoindent_update(subline) self.buffer.append(line) more = self.runsource('\n'.join(self.buffer), self.filename) if not more: self.resetbuffer() return more def resetbuffer(self): """Reset the input buffer.""" self.buffer[:] = [] def raw_input(self,prompt='',continue_prompt=False): """Write a prompt and read a line. The returned line does not include the trailing newline. When the user enters the EOF key sequence, EOFError is raised. Optional inputs: - prompt(''): a string to be printed to prompt the user. - continue_prompt(False): whether this line is the first one or a continuation in a sequence of inputs. """ # Code run by the user may have modified the readline completer state. # We must ensure that our completer is back in place. if self.has_readline: self.set_completer() try: line = raw_input_original(prompt).decode(self.stdin_encoding) except ValueError: warn("\n********\nYou or a %run:ed script called sys.stdin.close()" " or sys.stdout.close()!\nExiting IPython!") self.exit_now = True return "" # Try to be reasonably smart about not re-indenting pasted input more # than necessary. We do this by trimming out the auto-indent initial # spaces, if the user's actual input started itself with whitespace. #debugx('self.buffer[-1]') if self.autoindent: if num_ini_spaces(line) > self.indent_current_nsp: line = line[self.indent_current_nsp:] self.indent_current_nsp = 0 # store the unfiltered input before the user has any chance to modify # it. if line.strip(): if continue_prompt: self.input_hist_raw[-1] += '%s\n' % line if self.has_readline: # and some config option is set? try: histlen = self.readline.get_current_history_length() newhist = self.input_hist_raw[-1].rstrip() self.readline.remove_history_item(histlen-1) self.readline.replace_history_item(histlen-2,newhist) except AttributeError: pass # re{move,place}_history_item are new in 2.4. else: self.input_hist_raw.append('%s\n' % line) try: lineout = self.prefilter(line,continue_prompt) except: # blanket except, in case a user-defined prefilter crashes, so it # can't take all of ipython with it. self.showtraceback() return '' else: return lineout def split_user_input(self,line, pattern = None): """Split user input into pre-char, function part and rest.""" if pattern is None: pattern = self.line_split lsplit = pattern.match(line) if lsplit is None: # no regexp match returns None #print "match failed for line '%s'" % line # dbg try: iFun,theRest = line.split(None,1) except ValueError: #print "split failed for line '%s'" % line # dbg iFun,theRest = line,'' pre = re.match('^(\s*)(.*)',line).groups()[0] else: pre,iFun,theRest = lsplit.groups() # iFun has to be a valid python identifier, so it better be only pure #ascii, no unicode: try: iFun = iFun.encode('ascii') except UnicodeEncodeError: theRest = iFun+u' '+theRest iFun = u'' #print 'line:<%s>' % line # dbg #print 'pre <%s> iFun <%s> rest <%s>' % (pre,iFun.strip(),theRest) # dbg return pre,iFun.strip(),theRest # THIS VERSION IS BROKEN!!! It was intended to prevent spurious attribute # accesses with a more stringent check of inputs, but it introduced other # bugs. Disable it for now until I can properly fix it. def split_user_inputBROKEN(self,line): """Split user input into pre-char, function part and rest.""" lsplit = self.line_split.match(line) if lsplit is None: # no regexp match returns None lsplit = self.line_split_fallback.match(line) #pre,iFun,theRest = lsplit.groups() # dbg #print 'line:<%s>' % line # dbg #print 'pre <%s> iFun <%s> rest <%s>' % (pre,iFun.strip(),theRest) # dbg #return pre,iFun.strip(),theRest # dbg return lsplit.groups() def _prefilter(self, line, continue_prompt): """Calls different preprocessors, depending on the form of line.""" # All handlers *must* return a value, even if it's blank (''). # Lines are NOT logged here. Handlers should process the line as # needed, update the cache AND log it (so that the input cache array # stays synced). # This function is _very_ delicate, and since it's also the one which # determines IPython's response to user input, it must be as efficient # as possible. For this reason it has _many_ returns in it, trying # always to exit as quickly as it can figure out what it needs to do. # This function is the main responsible for maintaining IPython's # behavior respectful of Python's semantics. So be _very_ careful if # making changes to anything here. #..................................................................... # Code begins #if line.startswith('%crash'): raise RuntimeError,'Crash now!' # dbg # save the line away in case we crash, so the post-mortem handler can # record it self._last_input_line = line #print '***line: <%s>' % line # dbg # the input history needs to track even empty lines stripped = line.strip() if not stripped: if not continue_prompt: self.outputcache.prompt_count -= 1 return self.handle_normal(line,continue_prompt) #return self.handle_normal('',continue_prompt) # print '***cont',continue_prompt # dbg # special handlers are only allowed for single line statements if continue_prompt and not self.rc.multi_line_specials: return self.handle_normal(line,continue_prompt) # For the rest, we need the structure of the input pre,iFun,theRest = self.split_user_input(line) # See whether any pre-existing handler can take care of it rewritten = self.hooks.input_prefilter(stripped) if rewritten != stripped: # ok, some prefilter did something rewritten = pre + rewritten # add indentation return self.handle_normal(rewritten) #print 'pre <%s> iFun <%s> rest <%s>' % (pre,iFun,theRest) # dbg # Next, check if we can automatically execute this thing # Allow ! in multi-line statements if multi_line_specials is on: if continue_prompt and self.rc.multi_line_specials and \ iFun.startswith(self.ESC_SHELL): return self.handle_shell_escape(line,continue_prompt, pre=pre,iFun=iFun, theRest=theRest) # First check for explicit escapes in the last/first character handler = None if line[-1] == self.ESC_HELP and line[0] != self.ESC_SHELL: handler = self.esc_handlers.get(line[-1]) # the ? can be at the end if handler is None: # look at the first character of iFun, NOT of line, so we skip # leading whitespace in multiline input handler = self.esc_handlers.get(iFun[0:1]) if handler is not None: return handler(line,continue_prompt,pre,iFun,theRest) # Emacs ipython-mode tags certain input lines if line.endswith('# PYTHON-MODE'): return self.handle_emacs(line,continue_prompt) # Let's try to find if the input line is a magic fn oinfo = None if hasattr(self,'magic_'+iFun): # WARNING: _ofind uses getattr(), so it can consume generators and # cause other side effects. oinfo = self._ofind(iFun) # FIXME - _ofind is part of Magic if oinfo['ismagic']: # Be careful not to call magics when a variable assignment is # being made (ls='hi', for example) if self.rc.automagic and \ (len(theRest)==0 or theRest[0] not in '!=()<>,') and \ (self.rc.multi_line_specials or not continue_prompt): return self.handle_magic(line,continue_prompt, pre,iFun,theRest) else: return self.handle_normal(line,continue_prompt) # If the rest of the line begins with an (in)equality, assginment or # function call, we should not call _ofind but simply execute it. # This avoids spurious geattr() accesses on objects upon assignment. # # It also allows users to assign to either alias or magic names true # python variables (the magic/alias systems always take second seat to # true python code). if theRest and theRest[0] in '!=()': return self.handle_normal(line,continue_prompt) if oinfo is None: # let's try to ensure that _oinfo is ONLY called when autocall is # on. Since it has inevitable potential side effects, at least # having autocall off should be a guarantee to the user that no # weird things will happen. if self.rc.autocall: oinfo = self._ofind(iFun) # FIXME - _ofind is part of Magic else: # in this case, all that's left is either an alias or # processing the line normally. if iFun in self.alias_table: # if autocall is off, by not running _ofind we won't know # whether the given name may also exist in one of the # user's namespace. At this point, it's best to do a # quick check just to be sure that we don't let aliases # shadow variables. head = iFun.split('.',1)[0] if head in self.user_ns or head in self.internal_ns \ or head in __builtin__.__dict__: return self.handle_normal(line,continue_prompt) else: return self.handle_alias(line,continue_prompt, pre,iFun,theRest) else: return self.handle_normal(line,continue_prompt) if not oinfo['found']: return self.handle_normal(line,continue_prompt) else: #print 'pre<%s> iFun <%s> rest <%s>' % (pre,iFun,theRest) # dbg if oinfo['isalias']: return self.handle_alias(line,continue_prompt, pre,iFun,theRest) if (self.rc.autocall and ( #only consider exclusion re if not "," or ";" autoquoting (pre == self.ESC_QUOTE or pre == self.ESC_QUOTE2 or pre == self.ESC_PAREN) or (not self.re_exclude_auto.match(theRest))) and self.re_fun_name.match(iFun) and callable(oinfo['obj'])) : #print 'going auto' # dbg return self.handle_auto(line,continue_prompt, pre,iFun,theRest,oinfo['obj']) else: #print 'was callable?', callable(oinfo['obj']) # dbg return self.handle_normal(line,continue_prompt) # If we get here, we have a normal Python line. Log and return. return self.handle_normal(line,continue_prompt) def _prefilter_dumb(self, line, continue_prompt): """simple prefilter function, for debugging""" return self.handle_normal(line,continue_prompt) def multiline_prefilter(self, line, continue_prompt): """ Run _prefilter for each line of input Covers cases where there are multiple lines in the user entry, which is the case when the user goes back to a multiline history entry and presses enter. """ out = [] for l in line.rstrip('\n').split('\n'): out.append(self._prefilter(l, continue_prompt)) return '\n'.join(out) # Set the default prefilter() function (this can be user-overridden) prefilter = multiline_prefilter def handle_normal(self,line,continue_prompt=None, pre=None,iFun=None,theRest=None): """Handle normal input lines. Use as a template for handlers.""" # With autoindent on, we need some way to exit the input loop, and I # don't want to force the user to have to backspace all the way to # clear the line. The rule will be in this case, that either two # lines of pure whitespace in a row, or a line of pure whitespace but # of a size different to the indent level, will exit the input loop. if (continue_prompt and self.autoindent and line.isspace() and (0 < abs(len(line) - self.indent_current_nsp) <= 2 or (self.buffer[-1]).isspace() )): line = '' self.log(line,line,continue_prompt) return line def handle_alias(self,line,continue_prompt=None, pre=None,iFun=None,theRest=None): """Handle alias input lines. """ # pre is needed, because it carries the leading whitespace. Otherwise # aliases won't work in indented sections. transformed = self.expand_aliases(iFun, theRest) line_out = '%s_ip.system(%s)' % (pre, make_quoted_expr( transformed )) self.log(line,line_out,continue_prompt) #print 'line out:',line_out # dbg return line_out def handle_shell_escape(self, line, continue_prompt=None, pre=None,iFun=None,theRest=None): """Execute the line in a shell, empty return value""" #print 'line in :', `line` # dbg # Example of a special handler. Others follow a similar pattern. if line.lstrip().startswith('!!'): # rewrite iFun/theRest to properly hold the call to %sx and # the actual command to be executed, so handle_magic can work # correctly theRest = '%s %s' % (iFun[2:],theRest) iFun = 'sx' return self.handle_magic('%ssx %s' % (self.ESC_MAGIC, line.lstrip()[2:]), continue_prompt,pre,iFun,theRest) else: cmd=line.lstrip().lstrip('!') line_out = '%s_ip.system(%s)' % (pre,make_quoted_expr(cmd)) # update cache/log and return self.log(line,line_out,continue_prompt) return line_out def handle_magic(self, line, continue_prompt=None, pre=None,iFun=None,theRest=None): """Execute magic functions.""" cmd = '%s_ip.magic(%s)' % (pre,make_quoted_expr(iFun + " " + theRest)) self.log(line,cmd,continue_prompt) #print 'in handle_magic, cmd=<%s>' % cmd # dbg return cmd def handle_auto(self, line, continue_prompt=None, pre=None,iFun=None,theRest=None,obj=None): """Hande lines which can be auto-executed, quoting if requested.""" #print 'pre <%s> iFun <%s> rest <%s>' % (pre,iFun,theRest) # dbg # This should only be active for single-line input! if continue_prompt: self.log(line,line,continue_prompt) return line auto_rewrite = True if pre == self.ESC_QUOTE: # Auto-quote splitting on whitespace newcmd = '%s("%s")' % (iFun,'", "'.join(theRest.split()) ) elif pre == self.ESC_QUOTE2: # Auto-quote whole string newcmd = '%s("%s")' % (iFun,theRest) elif pre == self.ESC_PAREN: newcmd = '%s(%s)' % (iFun,",".join(theRest.split())) else: # Auto-paren. # We only apply it to argument-less calls if the autocall # parameter is set to 2. We only need to check that autocall is < # 2, since this function isn't called unless it's at least 1. if not theRest and (self.rc.autocall < 2): newcmd = '%s %s' % (iFun,theRest) auto_rewrite = False else: if theRest.startswith('['): if hasattr(obj,'__getitem__'): # Don't autocall in this case: item access for an object # which is BOTH callable and implements __getitem__. newcmd = '%s %s' % (iFun,theRest) auto_rewrite = False else: # if the object doesn't support [] access, go ahead and # autocall newcmd = '%s(%s)' % (iFun.rstrip(),theRest) elif theRest.endswith(';'): newcmd = '%s(%s);' % (iFun.rstrip(),theRest[:-1]) else: newcmd = '%s(%s)' % (iFun.rstrip(), theRest) if auto_rewrite: print >>Term.cout, self.outputcache.prompt1.auto_rewrite() + newcmd # log what is now valid Python, not the actual user input (without the # final newline) self.log(line,newcmd,continue_prompt) return newcmd def handle_help(self, line, continue_prompt=None, pre=None,iFun=None,theRest=None): """Try to get some help for the object. obj? or ?obj -> basic information. obj?? or ??obj -> more details. """ # We need to make sure that we don't process lines which would be # otherwise valid python, such as "x=1 # what?" try: codeop.compile_command(line) except SyntaxError: # We should only handle as help stuff which is NOT valid syntax if line[0]==self.ESC_HELP: line = line[1:] elif line[-1]==self.ESC_HELP: line = line[:-1] self.log(line,'#?'+line,continue_prompt) if line: #print 'line:<%r>' % line # dbg self.magic_pinfo(line) else: page(self.usage,screen_lines=self.rc.screen_length) return '' # Empty string is needed here! except: # Pass any other exceptions through to the normal handler return self.handle_normal(line,continue_prompt) else: # If the code compiles ok, we should handle it normally return self.handle_normal(line,continue_prompt) def getapi(self): """ Get an IPApi object for this shell instance Getting an IPApi object is always preferable to accessing the shell directly, but this holds true especially for extensions. It should always be possible to implement an extension with IPApi alone. If not, contact maintainer to request an addition. """ return self.api def handle_emacs(self,line,continue_prompt=None, pre=None,iFun=None,theRest=None): """Handle input lines marked by python-mode.""" # Currently, nothing is done. Later more functionality can be added # here if needed. # The input cache shouldn't be updated return line def mktempfile(self,data=None): """Make a new tempfile and return its filename. This makes a call to tempfile.mktemp, but it registers the created filename internally so ipython cleans it up at exit time. Optional inputs: - data(None): if data is given, it gets written out to the temp file immediately, and the file is closed again.""" filename = tempfile.mktemp('.py','ipython_edit_') self.tempfiles.append(filename) if data: tmp_file = open(filename,'w') tmp_file.write(data) tmp_file.close() return filename def write(self,data): """Write a string to the default output""" Term.cout.write(data) def write_err(self,data): """Write a string to the default error output""" Term.cerr.write(data) def exit(self): """Handle interactive exit. This method sets the exit_now attribute.""" if self.rc.confirm_exit: if self.ask_yes_no('Do you really want to exit ([y]/n)?','y'): self.exit_now = True else: self.exit_now = True def safe_execfile(self,fname,*where,**kw): """A safe version of the builtin execfile(). This version will never throw an exception, and knows how to handle ipython logs as well.""" def syspath_cleanup(): """Internal cleanup routine for sys.path.""" if add_dname: try: sys.path.remove(dname) except ValueError: # For some reason the user has already removed it, ignore. pass fname = os.path.expanduser(fname) # Find things also in current directory. This is needed to mimic the # behavior of running a script from the system command line, where # Python inserts the script's directory into sys.path dname = os.path.dirname(os.path.abspath(fname)) add_dname = False if dname not in sys.path: sys.path.insert(0,dname) add_dname = True try: xfile = open(fname) except: print >> Term.cerr, \ 'Could not open file <%s> for safe execution.' % fname syspath_cleanup() return None kw.setdefault('islog',0) kw.setdefault('quiet',1) kw.setdefault('exit_ignore',0) first = xfile.readline() loghead = str(self.loghead_tpl).split('\n',1)[0].strip() xfile.close() # line by line execution if first.startswith(loghead) or kw['islog']: print 'Loading log file <%s> one line at a time...' % fname if kw['quiet']: stdout_save = sys.stdout sys.stdout = StringIO.StringIO() try: globs,locs = where[0:2] except: try: globs = locs = where[0] except: globs = locs = globals() badblocks = [] # we also need to identify indented blocks of code when replaying # logs and put them together before passing them to an exec # statement. This takes a bit of regexp and look-ahead work in the # file. It's easiest if we swallow the whole thing in memory # first, and manually walk through the lines list moving the # counter ourselves. indent_re = re.compile('\s+\S') xfile = open(fname) filelines = xfile.readlines() xfile.close() nlines = len(filelines) lnum = 0 while lnum < nlines: line = filelines[lnum] lnum += 1 # don't re-insert logger status info into cache if line.startswith('#log#'): continue else: # build a block of code (maybe a single line) for execution block = line try: next = filelines[lnum] # lnum has already incremented except: next = None while next and indent_re.match(next): block += next lnum += 1 try: next = filelines[lnum] except: next = None # now execute the block of one or more lines try: exec block in globs,locs except SystemExit: pass except: badblocks.append(block.rstrip()) if kw['quiet']: # restore stdout sys.stdout.close() sys.stdout = stdout_save print 'Finished replaying log file <%s>' % fname if badblocks: print >> sys.stderr, ('\nThe following lines/blocks in file ' '<%s> reported errors:' % fname) for badline in badblocks: print >> sys.stderr, badline else: # regular file execution try: if sys.platform == 'win32' and sys.version_info < (2,5,1): # Work around a bug in Python for Windows. The bug was # fixed in in Python 2.5 r54159 and 54158, but that's still # SVN Python as of March/07. For details, see: # http://projects.scipy.org/ipython/ipython/ticket/123 try: globs,locs = where[0:2] except: try: globs = locs = where[0] except: globs = locs = globals() exec file(fname) in globs,locs else: execfile(fname,*where) except SyntaxError: self.showsyntaxerror() warn('Failure executing file: <%s>' % fname) except SystemExit,status: if not kw['exit_ignore']: self.showtraceback() warn('Failure executing file: <%s>' % fname) except: self.showtraceback() warn('Failure executing file: <%s>' % fname) syspath_cleanup() #************************* end of file *****************************