##// END OF EJS Templates
Added tag v1.1.3 for changeset 4fa80e0484ef
Added tag v1.1.3 for changeset 4fa80e0484ef

File last commit:

r992:c03d1678 issue-108
r1059:74015c16 default
Show More
setup.rst
301 lines | 9.3 KiB | text/x-rst | RstLexer

Setup

Setting up the application

First You'll ned to create RhodeCode config file. Run the following command to do this

paster make-config RhodeCode production.ini
  • This will create production.ini config inside the directory this config contains various settings for RhodeCode, e.g proxy port, email settings, usage of static files, cache, celery settings and logging.

Next we need to create the database.

paster setup-app production.ini
  • This command will create all needed tables and an admin account. When asked for a path You can either use a new location of one with already existing ones. RhodeCode will simply add all new found repositories to it's database. Also make sure You specify correct path to repositories.
  • Remember that the given path for mercurial repositories must be write accessible for the application. It's very important since RhodeCode web interface will work even without such an access but, when trying to do a push it'll eventually fail with permission denied errors.

You are ready to use rhodecode, to run it simply execute

paster serve production.ini
  • This command runs the RhodeCode server the app should be available at the 127.0.0.1:5000. This ip and port is configurable via the production.ini file created in previous step
  • Use admin account you created to login.
  • Default permissions on each repository is read, and owner is admin. So remember to update these if needed. In the admin panel You can toggle ldap, anonymous, permissions settings. As well as edit more advanced options on users and repositories

Setting up LDAP support

RhodeCode starting from version 1.1 supports ldap authentication. In order to use ldap, You have to install python-ldap package. This package is available via pypi, so You can install it by running

easy_install python-ldap
pip install python-ldap

Note

python-ldap requires some certain libs on Your system, so before installing it check that You have at least openldap, and sasl libraries.

ldap settings are located in admin->ldap section,

Here's a typical ldap setup:

Enable ldap  = checked                 #controls if ldap access is enabled
Host         = host.domain.org         #actual ldap server to connect
Port         = 389 or 689 for ldaps    #ldap server ports
Enable LDAPS = unchecked               #enable disable ldaps
Account      = <account>               #access for ldap server(if required)
Password     = <password>              #password for ldap server(if required)
Base DN      = uid=%(user)s,CN=users,DC=host,DC=domain,DC=org

Account and Password are optional, and used for two-phase ldap authentication so those are credentials to access Your ldap, if it doesn't support anonymous search/user lookups.

Base DN must have %(user)s template inside, it's a placer where Your uid used to login would go, it allows admins to specify not standard schema for uid variable

If all data are entered correctly, and python-ldap is properly installed Users should be granted to access RhodeCode wit ldap accounts. When logging at the first time an special ldap account is created inside RhodeCode, so You can control over permissions even on ldap users. If such user exists already in RhodeCode database ldap user with the same username would be not able to access RhodeCode.

If You have problems with ldap access and believe You entered correct information check out the RhodeCode logs,any error messages sent from ldap will be saved there.

Setting Up Celery

Since version 1.1 celery is configured by the rhodecode ini configuration files simply set use_celery=true in the ini file then add / change the configuration variables inside the ini file.

Remember that the ini files uses format with '.' not with '_' like celery so for example setting BROKER_HOST in celery means setting broker.host in the config file.

In order to make start using celery run:

paster celeryd <configfile.ini>

Note

Make sure You run this command from same virtualenv, and with the same user that rhodecode runs.

HTTPS support

There are two ways to enable https, first is to set HTTP_X_URL_SCHEME in Your http server headers, than rhodecode will recognise this headers and make proper https redirections, another way is to set force_https = true in the ini cofiguration to force using https, no headers are needed than to enable https

Nginx virtual host example

Sample config for nginx using proxy:

server {
   listen          80;
   server_name     hg.myserver.com;
   access_log      /var/log/nginx/rhodecode.access.log;
   error_log       /var/log/nginx/rhodecode.error.log;
   location / {
           root /var/www/rhodecode/rhodecode/public/;
           if (!-f $request_filename){
               proxy_pass      http://127.0.0.1:5000;
           }
           #this is important if You want to use https !!!
           proxy_set_header X-Url-Scheme $scheme;
           include         /etc/nginx/proxy.conf;
   }
}

Here's the proxy.conf. It's tuned so it'll not timeout on long pushes and also on large pushes:

proxy_redirect              off;
proxy_set_header            Host $host;
proxy_set_header            X-Host $http_host;
proxy_set_header            X-Real-IP $remote_addr;
proxy_set_header            X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header            Proxy-host $proxy_host;
client_max_body_size        400m;
client_body_buffer_size     128k;
proxy_buffering             off;
proxy_connect_timeout       3600;
proxy_send_timeout          3600;
proxy_read_timeout          3600;
proxy_buffer_size           8k;
proxy_buffers               8 32k;
proxy_busy_buffers_size     64k;
proxy_temp_file_write_size  64k;

Also when using root path with nginx You might set the static files to false in production.ini file:

[app:main]
  use = egg:rhodecode
  full_stack = true
  static_files = false
  lang=en
  cache_dir = %(here)s/data

To not have the statics served by the application. And improve speed.

Apache virtual host example

Sample config for apache using proxy:

<VirtualHost *:80>
        ServerName hg.myserver.com
        ServerAlias hg.myserver.com

        <Proxy *>
          Order allow,deny
          Allow from all
        </Proxy>

        #important !
        #Directive to properly generate url (clone url) for pylons
        ProxyPreserveHost On

        #rhodecode instance
        ProxyPass / http://127.0.0.1:5000/
        ProxyPassReverse / http://127.0.0.1:5000/

        #to enable https use line below
        #SetEnvIf X-Url-Scheme https HTTPS=1

</VirtualHost>

Additional tutorial http://wiki.pylonshq.com/display/pylonscookbook/Apache+as+a+reverse+proxy+for+Pylons

Apache's example FCGI config

TODO !

Other configuration files

Some example init.d script can be found here, for debian and gentoo:

https://rhodeocode.org/rhodecode/files/tip/init.d

Troubleshooting

  • missing static files ?
  • make sure either to set the static_files = true in the .ini file or double check the root path for Your http setup. It should point to for example: /home/my-virtual-python/lib/python2.6/site-packages/rhodecode/public
  • can't install celery/rabbitmq
  • don't worry RhodeCode works without them too. No extra setup required
  • long lasting push timeouts ?
  • make sure You set a longer timeouts in Your proxy/fcgi settings, timeouts are caused by https server and not RhodeCode
  • large pushes timeouts ?
  • make sure You set a proper max_body_size for the http server