.. _setup: Setup ===== Setting up RhodeCode -------------------------- First, you will need to create a RhodeCode configuration file. Run the following command to do this:: paster make-config RhodeCode production.ini - This will create the file `production.ini` in the current directory. This configuration file contains the various settings for RhodeCode, e.g proxy port, email settings, usage of static files, cache, celery settings and logging. Next, you need to create the databases used by RhodeCode. I recommend that you use sqlite (default) or postgresql. If you choose a database other than the default ensure you properly adjust the db url in your production.ini configuration file to use this other database. Create the databases by running the following command:: paster setup-app production.ini This will prompt you for a "root" path. This "root" path is the location where RhodeCode will store all of its repositories on the current machine. After entering this "root" path ``setup-app`` will also prompt you for a username and password for the initial admin account which ``setup-app`` sets up for you. - The ``setup-app`` command will create all of the needed tables and an admin account. When choosing a root path you can either use a new empty location, or a location which already contains existing repositories. If you choose a location which contains existing repositories RhodeCode will simply add all of the repositories at the chosen location to it's database. (Note: make sure you specify the correct path to the root). - Note: the given path for mercurial_ repositories **must** be write accessible for the application. It's very important since the RhodeCode web interface will work without write access, but when trying to do a push it will eventually fail with permission denied errors unless it has write access. You are now ready to use RhodeCode, to run it simply execute:: paster serve production.ini - This command runs the RhodeCode server. The web app should be available at the 127.0.0.1:5000. This ip and port is configurable via the production.ini file created in previous step - Use the admin account you created above when running ``setup-app`` to login to the web app. - The default permissions on each repository is read, and the owner is admin. Remember to update these if needed. - In the admin panel you can toggle ldap, anonymous, permissions settings. As well as edit more advanced options on users and repositories Try copying your own mercurial repository into the "root" directory you are using, then from within the RhodeCode web application choose Admin > repositories. Then choose Add New Repository. Add the repository you copied into the root. Test that you can browse your repository from within RhodeCode and then try cloning your repository from RhodeCode with:: hg clone http://127.0.0.1:5000/ where *repository name* is replaced by the name of your repository. Using RhodeCode with SSH ------------------------ RhodeCode currently only hosts repositories using http and https. (The addition of ssh hosting is a planned future feature.) However you can easily use ssh in parallel with RhodeCode. (Repository access via ssh is a standard "out of the box" feature of mercurial_ and you can use this to access any of the repositories that RhodeCode is hosting. See PublishingRepositories_) RhodeCode repository structures are kept in directories with the same name as the project. When using repository groups, each group is a subdirectory. This allows you to easily use ssh for accessing repositories. In order to use ssh you need to make sure that your web-server and the users login accounts have the correct permissions set on the appropriate directories. (Note that these permissions are independent of any permissions you have set up using the RhodeCode web interface.) If your main directory (the same as set in RhodeCode settings) is for example set to **/home/hg** and the repository you are using is named `rhodecode`, then to clone via ssh you should run:: hg clone ssh://user@server.com/home/hg/rhodecode Using other external tools such as mercurial-server_ or using ssh key based authentication is fully supported. Note: In an advanced setup, in order for your ssh access to use the same permissions as set up via the RhodeCode web interface, you can create an authentication hook to connect to the rhodecode db and runs check functions for permissions against that. Setting up Whoosh full text search ---------------------------------- Starting from version 1.1 the whoosh index can be build by using the paster command ``make-index``. To use ``make-index`` you must specify the configuration file that stores the location of the index, and the location of the repositories (`--repo-location`).Starting from version 1.2 it is also possible to specify a comma separated list of repositories (`--index-only`) to build index only on chooses repositories skipping any other found in repos location You may optionally pass the option `-f` to enable a full index rebuild. Without the `-f` option, indexing will run always in "incremental" mode. For an incremental index build use:: paster make-index production.ini --repo-location= For a full index rebuild use:: paster make-index production.ini -f --repo-location= building index just for chosen repositories is possible with such command:: paster make-index production.ini --repo-location= --index-only=vcs,rhodecode In order to do periodical index builds and keep your index always up to date. It's recommended to do a crontab entry for incremental indexing. An example entry might look like this:: /path/to/python/bin/paster /path/to/rhodecode/production.ini --repo-location= When using incremental mode (the default) whoosh will check the last modification date of each file and add it to be reindexed if a newer file is available. The indexing daemon checks for any removed files and removes them from index. If you want to rebuild index from scratch, you can use the `-f` flag as above, or in the admin panel you can check `build from scratch` flag. Setting up LDAP support ----------------------- RhodeCode starting from version 1.1 supports ldap authentication. In order to use LDAP, you have to install the python-ldap_ package. This package is available via pypi, so you can install it by running using easy_install:: easy_install python-ldap using pip:: pip install python-ldap .. note:: python-ldap requires some certain libs on your system, so before installing it check that you have at least `openldap`, and `sasl` libraries. LDAP settings are located in admin->ldap section, Here's a typical ldap setup:: Connection settings Enable LDAP = checked Host = host.example.org Port = 389 Account = Password = Connection Security = LDAPS connection Certificate Checks = DEMAND Search settings Base DN = CN=users,DC=host,DC=example,DC=org LDAP Filter = (&(objectClass=user)(!(objectClass=computer))) LDAP Search Scope = SUBTREE Attribute mappings Login Attribute = uid First Name Attribute = firstName Last Name Attribute = lastName E-mail Attribute = mail .. _enable_ldap: Enable LDAP : required Whether to use LDAP for authenticating users. .. _ldap_host: Host : required LDAP server hostname or IP address. .. _Port: Port : required 389 for un-encrypted LDAP, 636 for SSL-encrypted LDAP. .. _ldap_account: Account : optional Only required if the LDAP server does not allow anonymous browsing of records. This should be a special account for record browsing. This will require `LDAP Password`_ below. .. _LDAP Password: Password : optional Only required if the LDAP server does not allow anonymous browsing of records. .. _Enable LDAPS: Connection Security : required Defines the connection to LDAP server No encryption Plain non encrypted connection LDAPS connection Enable ldaps connection. It will likely require `Port`_ to be set to a different value (standard LDAPS port is 636). When LDAPS is enabled then `Certificate Checks`_ is required. START_TLS on LDAP connection START TLS connection .. _Certificate Checks: Certificate Checks : optional How SSL certificates verification is handled - this is only useful when `Enable LDAPS`_ is enabled. Only DEMAND or HARD offer full SSL security while the other options are susceptible to man-in-the-middle attacks. SSL certificates can be installed to /etc/openldap/cacerts so that the DEMAND or HARD options can be used with self-signed certificates or certificates that do not have traceable certificates of authority. NEVER A serve certificate will never be requested or checked. ALLOW A server certificate is requested. Failure to provide a certificate or providing a bad certificate will not terminate the session. TRY A server certificate is requested. Failure to provide a certificate does not halt the session; providing a bad certificate halts the session. DEMAND A server certificate is requested and must be provided and authenticated for the session to proceed. HARD The same as DEMAND. .. _Base DN: Base DN : required The Distinguished Name (DN) where searches for users will be performed. Searches can be controlled by `LDAP Filter`_ and `LDAP Search Scope`_. .. _LDAP Filter: LDAP Filter : optional A LDAP filter defined by RFC 2254. This is more useful when `LDAP Search Scope`_ is set to SUBTREE. The filter is useful for limiting which LDAP objects are identified as representing Users for authentication. The filter is augmented by `Login Attribute`_ below. This can commonly be left blank. .. _LDAP Search Scope: LDAP Search Scope : required This limits how far LDAP will search for a matching object. BASE Only allows searching of `Base DN`_ and is usually not what you want. ONELEVEL Searches all entries under `Base DN`_, but not Base DN itself. SUBTREE Searches all entries below `Base DN`_, but not Base DN itself. When using SUBTREE `LDAP Filter`_ is useful to limit object location. .. _Login Attribute: Login Attribute : required The LDAP record attribute that will be matched as the USERNAME or ACCOUNT used to connect to RhodeCode. This will be added to `LDAP Filter`_ for locating the User object. If `LDAP Filter`_ is specified as "LDAPFILTER", `Login Attribute`_ is specified as "uid" and the user has connected as "jsmith" then the `LDAP Filter`_ will be augmented as below :: (&(LDAPFILTER)(uid=jsmith)) .. _ldap_attr_firstname: First Name Attribute : required The LDAP record attribute which represents the user's first name. .. _ldap_attr_lastname: Last Name Attribute : required The LDAP record attribute which represents the user's last name. .. _ldap_attr_email: Email Attribute : required The LDAP record attribute which represents the user's email address. If all data are entered correctly, and python-ldap_ is properly installed users should be granted access to RhodeCode with ldap accounts. At this time user information is copied from LDAP into the RhodeCode user database. This means that updates of an LDAP user object may not be reflected as a user update in RhodeCode. If You have problems with LDAP access and believe You entered correct information check out the RhodeCode logs, any error messages sent from LDAP will be saved there. Active Directory '''''''''''''''' RhodeCode can use Microsoft Active Directory for user authentication. This is done through an LDAP or LDAPS connection to Active Directory. The following LDAP configuration settings are typical for using Active Directory :: Base DN = OU=SBSUsers,OU=Users,OU=MyBusiness,DC=v3sys,DC=local Login Attribute = sAMAccountName First Name Attribute = givenName Last Name Attribute = sn E-mail Attribute = mail All other LDAP settings will likely be site-specific and should be appropriately configured. Setting Up Celery ----------------- Since version 1.1 celery is configured by the rhodecode ini configuration files. Simply set use_celery=true in the ini file then add / change the configuration variables inside the ini file. Remember that the ini files use the format with '.' not with '_' like celery. So for example setting `BROKER_HOST` in celery means setting `broker.host` in the config file. In order to start using celery run:: paster celeryd .. note:: Make sure you run this command from the same virtualenv, and with the same user that rhodecode runs. HTTPS support ------------- There are two ways to enable https: - Set HTTP_X_URL_SCHEME in your http server headers, than rhodecode will recognize this headers and make proper https redirections - Alternatively, set the `force_https = true` in the ini configuration to force using https, no headers are needed than to enable https Nginx virtual host example -------------------------- Sample config for nginx using proxy:: server { listen 80; server_name hg.myserver.com; access_log /var/log/nginx/rhodecode.access.log; error_log /var/log/nginx/rhodecode.error.log; location / { root /var/www/rhodecode/rhodecode/public/; if (!-f $request_filename){ proxy_pass http://127.0.0.1:5000; } #this is important if you want to use https !!! proxy_set_header X-Url-Scheme $scheme; include /etc/nginx/proxy.conf; } } Here's the proxy.conf. It's tuned so it will not timeout on long pushes or large pushes:: proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Proxy-host $proxy_host; client_max_body_size 400m; client_body_buffer_size 128k; proxy_buffering off; proxy_connect_timeout 3600; proxy_send_timeout 3600; proxy_read_timeout 3600; proxy_buffer_size 16k; proxy_buffers 4 16k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; Also, when using root path with nginx you might set the static files to false in the production.ini file:: [app:main] use = egg:rhodecode full_stack = true static_files = false lang=en cache_dir = %(here)s/data In order to not have the statics served by the application. This improves speed. Apache virtual host example --------------------------- Here is a sample configuration file for apache using proxy:: ServerName hg.myserver.com ServerAlias hg.myserver.com Order allow,deny Allow from all #important ! #Directive to properly generate url (clone url) for pylons ProxyPreserveHost On #rhodecode instance ProxyPass / http://127.0.0.1:5000/ ProxyPassReverse / http://127.0.0.1:5000/ #to enable https use line below #SetEnvIf X-Url-Scheme https HTTPS=1 Additional tutorial http://wiki.pylonshq.com/display/pylonscookbook/Apache+as+a+reverse+proxy+for+Pylons Apache as subdirectory ---------------------- Apache subdirectory part:: > ProxyPass http://127.0.0.1:5000/ ProxyPassReverse http://127.0.0.1:5000/ SetEnvIf X-Url-Scheme https HTTPS=1 Besides the regular apache setup you will need to add the following line into [app:main] section of your .ini file:: filter-with = proxy-prefix Add the following at the end of the .ini file:: [filter:proxy-prefix] use = egg:PasteDeploy#prefix prefix = / then change into your choosen prefix Apache's WSGI config -------------------- Example wsgi dispatch script:: import os os.environ["HGENCODING"] = "UTF-8" os.environ['PYTHON_EGG_CACHE'] = '/home/web/rhodecode/.egg-cache' # sometimes it's needed to set the curent dir os.chdir('/home/web/rhodecode/') from paste.deploy import loadapp from paste.script.util.logging_config import fileConfig fileConfig('/home/web/rhodecode/production.ini') application = loadapp('config:/home/web/rhodecode/production.ini') Other configuration files ------------------------- Some example init.d scripts can be found here, for debian and gentoo: https://rhodecode.org/rhodecode/files/tip/init.d Troubleshooting --------------- :Q: **Missing static files?** :A: Make sure either to set the `static_files = true` in the .ini file or double check the root path for your http setup. It should point to for example: /home/my-virtual-python/lib/python2.6/site-packages/rhodecode/public | :Q: **Can't install celery/rabbitmq** :A: Don't worry RhodeCode works without them too. No extra setup is required. | :Q: **Long lasting push timeouts?** :A: Make sure you set a longer timeouts in your proxy/fcgi settings, timeouts are caused by https server and not RhodeCode. | :Q: **Large pushes timeouts?** :A: Make sure you set a proper max_body_size for the http server. | :Q: **Apache doesn't pass basicAuth on pull/push?** :A: Make sure you added `WSGIPassAuthorization true`. For further questions search the `Issues tracker`_, or post a message in the `google group rhodecode`_ .. _virtualenv: http://pypi.python.org/pypi/virtualenv .. _python: http://www.python.org/ .. _mercurial: http://mercurial.selenic.com/ .. _celery: http://celeryproject.org/ .. _rabbitmq: http://www.rabbitmq.com/ .. _python-ldap: http://www.python-ldap.org/ .. _mercurial-server: http://www.lshift.net/mercurial-server.html .. _PublishingRepositories: http://mercurial.selenic.com/wiki/PublishingRepositories .. _Issues tracker: https://bitbucket.org/marcinkuzminski/rhodecode/issues .. _google group rhodecode: http://groups.google.com/group/rhodecode