.. _setup: Setup ===== Setting up the application -------------------------- :: paster make-config RhodeCode production.ini - This will create `production.ini` config inside the directory this config contains various settings for RhodeCode, e.g proxy port, email settings,static files, cache and logging. :: paster setup-app production.ini - This command will create all needed tables and an admin account. When asked for a path You can either use a new location of one with already existing ones. RhodeCode will simply add all new found repositories to it's database. Also make sure You specify correct path to repositories. - Remember that the given path for mercurial_ repositories must be write accessible for the application. It's very important since RhodeCode web interface will work even without such an access but, when trying to do a push it'll eventually fail with permission denied errors. - Run :: paster serve production.ini - This command runs the RhodeCode server the app should be available at the 127.0.0.1:5000. This ip and port is configurable via the production.ini file created in previous step - Use admin account you created to login. - Default permissions on each repository is read, and owner is admin. So remember to update these if needed. Setting up Whoosh full text search ---------------------------------- Index for whoosh can be build starting from version 1.1 using paster command passing repo locations to index, as well as Your config file that stores whoosh index files locations. There is possible to pass `-f` to the options to enable full index rebuild. Without that indexing will run always in in incremental mode. :: paster make-index --repo-location= production.ini for full index rebuild You can use :: paster make-index -f --repo-location= production.ini - For full text search You can either put crontab entry for This command can be run even from crontab in order to do periodical index builds and keep Your index always up to date. An example entry might look like this :: /path/to/python/bin/paster --repo-location= /path/to/rhodecode/production.ini When using incremental(default) mode whoosh will check last modification date of each file and add it to reindex if newer file is available. Also indexing daemon checks for removed files and removes them from index. Sometime You might want to rebuild index from scratch. You can do that using the `-f` flag passed to paster command or, in admin panel You can check `build from scratch` flag. Setting up LDAP support ----------------------- RhodeCode starting from version 1.1 supports ldap authentication. In order to use ldap, You have to install python-ldap package. This package is available via pypi, so You can install it by running :: easy_install python-ldap :: pip install python-ldap .. note:: python-ldap requires some certain libs on Your system, so before installing it check that You have at least `openldap`, and `sasl` libraries. ldap settings are located in admin->ldap section, Here's a typical ldap setup:: Enable ldap = checked #controls if ldap access is enabled Host = host.domain.org #actual ldap server to connect Port = 389 or 689 for ldaps #ldap server ports Enable LDAPS = unchecked #enable disable ldaps Account = #access for ldap server(if required) Password = #password for ldap server(if required) Base DN = uid=%(user)s,CN=users,DC=host,DC=domain,DC=org `Account` and `Password` are optional, and used for two-phase ldap authentication so those are credentials to access Your ldap, if it doesn't support anonymous search/user lookups. Base DN must have %(user)s template inside, it's a placer where Your uid used to login would go, it allows admins to specify not standard schema for uid variable If all data are entered correctly, and `python-ldap` is properly installed Users should be granted to access RhodeCode wit ldap accounts. When logging at the first time an special ldap account is created inside RhodeCode, so You can control over permissions even on ldap users. If such user exists already in RhodeCode database ldap user with the same username would be not able to access RhodeCode. If You have problems with ldap access and believe You entered correct information check out the RhodeCode logs,any error messages sent from ldap will be saved there. Setting Up Celery ----------------- Since version 1.1 celery is configured by the rhodecode ini configuration files simply set use_celery=true in the ini file then add / change the configuration variables inside the ini file. Remember that the ini files uses format with '.' not with '_' like celery so for example setting `BROKER_HOST` in celery means setting `broker.host` in the config file. In order to make start using celery run:: paster celeryd Nginx virtual host example -------------------------- Sample config for nginx using proxy:: server { listen 80; server_name hg.myserver.com; access_log /var/log/nginx/rhodecode.access.log; error_log /var/log/nginx/rhodecode.error.log; location / { root /var/www/rhodecode/rhodecode/public/; if (!-f $request_filename){ proxy_pass http://127.0.0.1:5000; } #this is important for https !!! proxy_set_header X-Url-Scheme $scheme; include /etc/nginx/proxy.conf; } } Here's the proxy.conf. It's tuned so it'll not timeout on long pushes and also on large pushes:: proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Proxy-host $proxy_host; client_max_body_size 400m; client_body_buffer_size 128k; proxy_buffering off; proxy_connect_timeout 3600; proxy_send_timeout 3600; proxy_read_timeout 3600; proxy_buffer_size 8k; proxy_buffers 8 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; Also when using root path with nginx You might set the static files to false in production.ini file:: [app:main] use = egg:rhodecode full_stack = true static_files = false lang=en cache_dir = %(here)s/data To not have the statics served by the application. And improve speed. Apache reverse proxy -------------------- Tutorial can be found here http://wiki.pylonshq.com/display/pylonscookbook/Apache+as+a+reverse+proxy+for+Pylons Apache's example FCGI config ---------------------------- TODO ! Other configuration files ------------------------- Some extra configuration files and examples can be found here: http://hg.python-works.com/rhodecode/files/tip/init.d and also an celeryconfig file can be use from here: http://hg.python-works.com/rhodecode/files/tip/celeryconfig.py Troubleshooting --------------- - missing static files ? - make sure either to set the `static_files = true` in the .ini file or double check the root path for Your http setup. It should point to for example: /home/my-virtual-python/lib/python2.6/site-packages/rhodecode/public - can't install celery/rabbitmq - don't worry RhodeCode works without them too. No extra setup required - long lasting push timeouts ? - make sure You set a longer timeouts in Your proxy/fcgi settings, timeouts are caused by https server and not RhodeCode - large pushes timeouts ? - make sure You set a proper max_body_size for the http server .. _virtualenv: http://pypi.python.org/pypi/virtualenv .. _python: http://www.python.org/ .. _mercurial: http://mercurial.selenic.com/ .. _celery: http://celeryproject.org/ .. _rabbitmq: http://www.rabbitmq.com/