##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

sslutil: require TLS 1.1+ when supported...
sslutil: require TLS 1.1+ when supported Currently, Mercurial will use TLS 1.0 or newer when connecting to remote servers, selecting the highest TLS version supported by both peers. On older Pythons, only TLS 1.0 is available. On newer Pythons, TLS 1.1 and 1.2 should be available. Security professionals recommend avoiding TLS 1.0 if possible. PCI DSS 3.1 "strongly encourages" the use of TLS 1.2. Known attacks like BEAST and POODLE exist against TLS 1.0 (although mitigations are available and properly configured servers aren't vulnerable). I asked Eric Rescorla - Mozilla's resident crypto expert - whether Mercurial should drop support for TLS 1.0. His response was "if you can get away with it." Essentially, a number of servers on the Internet don't support TLS 1.1+. This is why web browsers continue to support TLS 1.0 despite desires from security experts. This patch changes Mercurial's default behavior on modern Python versions to require TLS 1.1+, thus avoiding known security issues with TLS 1.0 and making Mercurial more secure by default. Rather than drop TLS 1.0 support wholesale, we still allow TLS 1.0 to be used if configured. This is a compromise solution - ideally we'd disallow TLS 1.0. However, since we're not sure how many Mercurial servers don't support TLS 1.1+ and we're not sure how much user inconvenience this change will bring, I think it is prudent to ship an escape hatch that still allows usage of TLS 1.0. In the default case our users get better security. In the worst case, they are no worse off than before this patch. This patch has no effect when running on Python versions that don't support TLS 1.1+. As the added test shows, connecting to a server that doesn't support TLS 1.1+ will display a warning message with a link to our wiki, where we can guide people to configure their client to allow less secure connections.
Augie Fackler - - Load All Authors

File last commit:

r28184:11c2f8af default
r29560:303e9300 default
Show More
test-automv.t
338 lines | 7.0 KiB | text/troff | Tads3Lexer
/ tests / test-automv.t
History | Source | Raw |Copy content |Copy permalink
Martijn Pieters
automv: add some context for the tests
 r28147 Tests for the automv extension; detect moved files at commit time.
Martijn Pieters
automv: new experimental extension...
 r28129 $ cat >> $HGRCPATH << EOF
> [extensions]
> automv=
> rebase=
> EOF
Setup repo
$ hg init repo
$ cd repo
Test automv command for commit
Martijn Pieters
automv: use 95 as the default similarity threshold...
 r28183 $ printf 'foo\nbar\nbaz\n' > a.txt
Martijn Pieters
automv: new experimental extension...
 r28129 $ hg add a.txt
$ hg commit -m 'init repo with a'
mv/rm/add
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit -m 'msg'
detected move of 1 files
$ hg status --change . -C
A b.txt
a.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/modif
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
Martijn Pieters
automv: use 95 as the default similarity threshold...
 r28183 $ printf '\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit -m 'msg'
detected move of 1 files
created new head
$ hg status --change . -C
A b.txt
a.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/modif
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
Martijn Pieters
automv: new experimental extension...
 r28129 $ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit -m 'msg'
created new head
$ hg status --change . -C
A b.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/modif/changethreshold
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
Augie Fackler
test-automv: fix inline config settings for 5ec1ce8fdf0a
 r28184 $ hg commit --config automv.similarity='60' -m 'msg'
Martijn Pieters
automv: new experimental extension...
 r28129 detected move of 1 files
created new head
$ hg status --change . -C
A b.txt
a.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv
$ mv a.txt b.txt
$ hg status -C
! a.txt
? b.txt
$ hg commit -m 'msg'
nothing changed (1 missing files, see 'hg status')
[1]
$ hg status -C
! a.txt
? b.txt
$ hg revert -aqC
$ rm b.txt
mv/rm/add/notincommitfiles
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ echo 'bar' > c.txt
$ hg add c.txt
$ hg status -C
A b.txt
A c.txt
R a.txt
$ hg commit c.txt -m 'msg'
created new head
$ hg status --change . -C
A c.txt
$ hg status -C
A b.txt
R a.txt
$ hg up -r 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg rm a.txt
$ echo 'bar' > c.txt
$ hg add c.txt
$ hg commit -m 'msg'
detected move of 1 files
created new head
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/--no-automv
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --no-automv -m 'msg'
created new head
$ hg status --change . -C
A b.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
Test automv command for commit --amend
mv/rm/add
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/modif
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
Martijn Pieters
automv: use 95 as the default similarity threshold...
 r28183 $ printf '\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/modif
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
Martijn Pieters
automv: new experimental extension...
 r28129 $ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/modif/changethreshold
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
Augie Fackler
test-automv: fix inline config settings for 5ec1ce8fdf0a
 r28184 $ hg commit --amend --config automv.similarity='60' -m 'amended'
Martijn Pieters
automv: new experimental extension...
 r28129 detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg status -C
! a.txt
? b.txt
$ hg commit --amend -m 'amended'
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status -C
! a.txt
? b.txt
$ hg up -Cr 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/notincommitfiles
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ echo 'bar' > d.txt
$ hg add d.txt
$ hg status -C
A b.txt
A d.txt
R a.txt
$ hg commit --amend -m 'amended' d.txt
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A c.txt
A d.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
A d.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 3 files removed, 0 files unresolved
mv/rm/add/--no-automv
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended' --no-automv
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/commit/add/amend
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg status -C
R a.txt
? b.txt
$ hg commit -m "removed a"
$ hg add b.txt
$ hg commit --amend -m 'amended'
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
R a.txt
Martijn Pieters
automv: use 95 as the default similarity threshold...
 r28183
error conditions
$ cat >> $HGRCPATH << EOF
> [automv]
> similarity=110
> EOF
$ hg commit -m 'revision to amend to'
abort: automv.similarity must be between 0 and 100
[255]