##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

sslutil: require TLS 1.1+ when supported...
sslutil: require TLS 1.1+ when supported Currently, Mercurial will use TLS 1.0 or newer when connecting to remote servers, selecting the highest TLS version supported by both peers. On older Pythons, only TLS 1.0 is available. On newer Pythons, TLS 1.1 and 1.2 should be available. Security professionals recommend avoiding TLS 1.0 if possible. PCI DSS 3.1 "strongly encourages" the use of TLS 1.2. Known attacks like BEAST and POODLE exist against TLS 1.0 (although mitigations are available and properly configured servers aren't vulnerable). I asked Eric Rescorla - Mozilla's resident crypto expert - whether Mercurial should drop support for TLS 1.0. His response was "if you can get away with it." Essentially, a number of servers on the Internet don't support TLS 1.1+. This is why web browsers continue to support TLS 1.0 despite desires from security experts. This patch changes Mercurial's default behavior on modern Python versions to require TLS 1.1+, thus avoiding known security issues with TLS 1.0 and making Mercurial more secure by default. Rather than drop TLS 1.0 support wholesale, we still allow TLS 1.0 to be used if configured. This is a compromise solution - ideally we'd disallow TLS 1.0. However, since we're not sure how many Mercurial servers don't support TLS 1.1+ and we're not sure how much user inconvenience this change will bring, I think it is prudent to ship an escape hatch that still allows usage of TLS 1.0. In the default case our users get better security. In the worst case, they are no worse off than before this patch. This patch has no effect when running on Python versions that don't support TLS 1.1+. As the added test shows, connecting to a server that doesn't support TLS 1.1+ will display a warning message with a link to our wiki, where we can guide people to configure their client to allow less secure connections.
timeless - - Load All Authors

File last commit:

r28996:b74ca9ac stable
r29560:303e9300 default
Show More
test-http-bundle1.t
333 lines | 11.6 KiB | text/troff | Tads3Lexer
/ tests / test-http-bundle1.t
History | Source | Raw |Copy content |Copy permalink
Pierre-Yves David
test: copy test-http.t to test-http-bundle1.t...
 r25377 #require serve
This test is a duplicate of 'test-http.t', feel free to factor out
parts that are not bundle1/bundle2 specific.
$ cat << EOF >> $HGRCPATH
> [experimental]
> # This test is dedicated to interaction through old bundle
> bundle2-exp = False
> EOF
$ hg init test
$ cd test
$ echo foo>foo
$ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
$ echo foo>foo.d/foo
$ echo bar>foo.d/bAr.hg.d/BaR
$ echo bar>foo.d/baR.d.hg/bAR
$ hg commit -A -m 1
adding foo
adding foo.d/bAr.hg.d/BaR
adding foo.d/baR.d.hg/bAR
adding foo.d/foo
$ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log
Jun Wu
tests: reorder hg serve commands...
 r28549 $ hg serve --config server.uncompressed=False -p $HGPORT1 -d --pid-file=../hg2.pid
Pierre-Yves David
test: copy test-http.t to test-http-bundle1.t...
 r25377
Test server address cannot be reused
#if windows
$ hg serve -p $HGPORT1 2>&1
abort: cannot start server at ':$HGPORT1': * (glob)
[255]
#else
$ hg serve -p $HGPORT1 2>&1
abort: cannot start server at ':$HGPORT1': Address already in use
[255]
#endif
$ cd ..
$ cat hg1.pid hg2.pid >> $DAEMON_PIDS
clone via stream
$ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1
streaming all changes
6 files to transfer, 606 bytes of data
transferred * bytes in * seconds (*/sec) (glob)
searching for changes
no changes found
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R copy
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 1 changesets, 4 total revisions
try to clone via stream, should use pull instead
$ hg clone --uncompressed http://localhost:$HGPORT1/ copy2
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
clone via pull
$ hg clone http://localhost:$HGPORT1/ copy-pull
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R copy-pull
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 1 changesets, 4 total revisions
$ cd test
$ echo bar > bar
$ hg commit -A -d '1 0' -m 2
adding bar
$ cd ..
clone over http with --update
$ hg clone http://localhost:$HGPORT1/ updated --update 0
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 5 changes to 5 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg log -r . -R updated
changeset: 0:8b6053c928fe
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: 1
$ rm -rf updated
incoming via HTTP
$ hg clone http://localhost:$HGPORT1/ --rev 0 partial
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd partial
$ touch LOCAL
$ hg ci -qAm LOCAL
$ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n'
comparing with http://localhost:$HGPORT1/
searching for changes
2
$ cd ..
pull
$ cd copy-pull
$ echo '[hooks]' >> .hg/hgrc
Matt Mackall
tests: simplify printenv calls...
 r25478 $ echo "changegroup = printenv.py changegroup" >> .hg/hgrc
Pierre-Yves David
test: copy test-http.t to test-http-bundle1.t...
 r25377 $ hg pull
pulling from http://localhost:$HGPORT1/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
Mateusz Kwapich
hooks: add HG_NODE_LAST to txnclose and changegroup hook environments...
 r27739 changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:* HG_URL=http://localhost:$HGPORT1/ (glob)
Pierre-Yves David
test: copy test-http.t to test-http-bundle1.t...
 r25377 (run 'hg update' to get a working copy)
$ cd ..
clone from invalid URL
$ hg clone http://localhost:$HGPORT/bad
abort: HTTP Error 404: Not Found
[255]
test http authentication
+ use the same server to test server side streaming preference
$ cd test
$ cat << EOT > userpass.py
> import base64
> from mercurial.hgweb import common
> def perform_authentication(hgweb, req, op):
> auth = req.env.get('HTTP_AUTHORIZATION')
> if not auth:
> raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who',
> [('WWW-Authenticate', 'Basic Realm="mercurial"')])
> if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']:
> raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no')
> def extsetup():
> common.permhooks.insert(0, perform_authentication)
> EOT
Jun Wu
tests: reorder hg serve commands...
 r28549 $ hg serve --config extensions.x=userpass.py -p $HGPORT2 -d --pid-file=pid \
Pierre-Yves David
test: copy test-http.t to test-http-bundle1.t...
 r25377 > --config server.preferuncompressed=True \
> --config web.push_ssl=False --config web.allow_push=* -A ../access.log
$ cat pid >> $DAEMON_PIDS
$ cat << EOF > get_pass.py
> import getpass
> def newgetpass(arg):
> return "pass"
> getpass.getpass = newgetpass
> EOF
$ hg id http://localhost:$HGPORT2/
abort: http authorization required for http://localhost:$HGPORT2/
[255]
$ hg id http://localhost:$HGPORT2/
abort: http authorization required for http://localhost:$HGPORT2/
[255]
$ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/
http authorization required for http://localhost:$HGPORT2/
realm: mercurial
user: user
password: 5fed3813f7f5
$ hg id http://user:pass@localhost:$HGPORT2/
5fed3813f7f5
$ echo '[auth]' >> .hg/hgrc
$ echo 'l.schemes=http' >> .hg/hgrc
$ echo 'l.prefix=lo' >> .hg/hgrc
$ echo 'l.username=user' >> .hg/hgrc
$ echo 'l.password=pass' >> .hg/hgrc
$ hg id http://localhost:$HGPORT2/
5fed3813f7f5
$ hg id http://localhost:$HGPORT2/
5fed3813f7f5
$ hg id http://user@localhost:$HGPORT2/
5fed3813f7f5
$ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1
streaming all changes
7 files to transfer, 916 bytes of data
transferred * bytes in * seconds (*/sec) (glob)
searching for changes
no changes found
updating to branch default
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
--pull should override server's preferuncompressed
$ hg clone --pull http://user:pass@localhost:$HGPORT2/ dest-pull 2>&1
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 5 changes to 5 files
updating to branch default
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id http://user2@localhost:$HGPORT2/
abort: http authorization required for http://localhost:$HGPORT2/
[255]
$ hg id http://user:pass2@localhost:$HGPORT2/
abort: HTTP Error 403: no
[255]
$ hg -R dest tag -r tip top
$ hg -R dest push http://user:pass@localhost:$HGPORT2/
pushing to http://user:***@localhost:$HGPORT2/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
$ hg rollback -q
$ cut -c38- ../access.log
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=branchmap HTTP/1.1" 200 -
"GET /?cmd=stream_out HTTP/1.1" 401 -
"GET /?cmd=stream_out HTTP/1.1" 200 -
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D
"GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=branchmap HTTP/1.1" 200 -
"GET /?cmd=branchmap HTTP/1.1" 200 -
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
timeless
tests: tolerate http2...
 r28996 "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+5eb5abfefeea63c80dd7553bcc3783f37e0c5524* (glob)
Pierre-Yves David
test: copy test-http.t to test-http-bundle1.t...
 r25377 "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
$ cd ..
clone of serve with repo in root and unserved subrepo (issue2970)
$ hg --cwd test init sub
$ echo empty > test/sub/empty
$ hg --cwd test/sub add empty
$ hg --cwd test/sub commit -qm 'add empty'
$ hg --cwd test/sub tag -r 0 something
$ echo sub = sub > test/.hgsub
$ hg --cwd test add .hgsub
$ hg --cwd test commit -qm 'add subrepo'
$ hg clone http://localhost:$HGPORT noslash-clone
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 7 changes to 7 files
updating to branch default
abort: HTTP Error 404: Not Found
[255]
$ hg clone http://localhost:$HGPORT/ slash-clone
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 7 changes to 7 files
updating to branch default
abort: HTTP Error 404: Not Found
[255]
check error log
$ cat error.log