##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

sslutil: require TLS 1.1+ when supported...
sslutil: require TLS 1.1+ when supported Currently, Mercurial will use TLS 1.0 or newer when connecting to remote servers, selecting the highest TLS version supported by both peers. On older Pythons, only TLS 1.0 is available. On newer Pythons, TLS 1.1 and 1.2 should be available. Security professionals recommend avoiding TLS 1.0 if possible. PCI DSS 3.1 "strongly encourages" the use of TLS 1.2. Known attacks like BEAST and POODLE exist against TLS 1.0 (although mitigations are available and properly configured servers aren't vulnerable). I asked Eric Rescorla - Mozilla's resident crypto expert - whether Mercurial should drop support for TLS 1.0. His response was "if you can get away with it." Essentially, a number of servers on the Internet don't support TLS 1.1+. This is why web browsers continue to support TLS 1.0 despite desires from security experts. This patch changes Mercurial's default behavior on modern Python versions to require TLS 1.1+, thus avoiding known security issues with TLS 1.0 and making Mercurial more secure by default. Rather than drop TLS 1.0 support wholesale, we still allow TLS 1.0 to be used if configured. This is a compromise solution - ideally we'd disallow TLS 1.0. However, since we're not sure how many Mercurial servers don't support TLS 1.1+ and we're not sure how much user inconvenience this change will bring, I think it is prudent to ship an escape hatch that still allows usage of TLS 1.0. In the default case our users get better security. In the worst case, they are no worse off than before this patch. This patch has no effect when running on Python versions that don't support TLS 1.1+. As the added test shows, connecting to a server that doesn't support TLS 1.1+ will display a warning message with a link to our wiki, where we can guide people to configure their client to allow less secure connections.
Pierre-Yves David - - Load All Authors

File last commit:

r28030:ca2a0a65 default
r29560:303e9300 default
Show More
test-pull-branch.t
215 lines | 5.1 KiB | text/troff | Tads3Lexer
/ tests / test-pull-branch.t
History | Source | Raw |Copy content |Copy permalink
Adrian Buehlmann
combine tests
 r12279 $ hg init t
$ cd t
$ echo 1 > foo
$ hg ci -Am1 # 0
adding foo
$ hg branch branchA
marked working directory as branch branchA
Matt Mackall
branch: warn on branching
 r15615 (branches are permanent and global, did you want a bookmark?)
Adrian Buehlmann
combine tests
 r12279 $ echo a1 > foo
$ hg ci -ma1 # 1
$ cd ..
$ hg init tt
$ cd tt
$ hg pull ../t
pulling from ../t
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
(run 'hg update' to get a working copy)
$ hg up branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ../t
$ echo a2 > foo
$ hg ci -ma2 # 2
Create branch B:
$ hg up 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch branchB
marked working directory as branch branchB
$ echo b1 > foo
$ hg ci -mb1 # 3
$ cd ../tt
A new branch is there
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files (+1 heads)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Develop both branches:
$ cd ../t
$ hg up branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a3 > foo
$ hg ci -ma3 # 4
$ hg up branchB
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b2 > foo
$ hg ci -mb2 # 5
$ cd ../tt
Should succeed, no new heads:
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Add a head on other branch:
$ cd ../t
$ hg up branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a4 > foo
$ hg ci -ma4 # 6
$ hg up branchB
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b3.1 > foo
$ hg ci -m b3.1 # 7
$ hg up 5
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b3.2 > foo
$ hg ci -m b3.2 # 8
created new head
$ cd ../tt
Should succeed because there is only one head on our branch:
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 1 files (+1 heads)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ../t
$ hg up -C branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a5.1 > foo
$ hg ci -ma5.1 # 9
$ hg up 6
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a5.2 > foo
$ hg ci -ma5.2 # 10
created new head
$ hg up 7
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b4.1 > foo
$ hg ci -m b4.1 # 11
$ hg up -C 8
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b4.2 > foo
$ hg ci -m b4.2 # 12
$ cd ../tt
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 4 changes to 1 files (+1 heads)
Brendan Cully
Make pull -u behave like pull && update...
 r14485 1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Pierre-Yves David
update: warn about other topological head in pull and unbundle...
 r28030 1 other heads for branch "branchA"
Adrian Buehlmann
combine tests
 r12279
Kevin Berridge
pull: don't suggest running hg merge when new heads are on different branches...
 r13803 Make changes on new branch on tt
Brendan Cully
Make pull -u behave like pull && update...
 r14485 $ hg up 6
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Kevin Berridge
pull: don't suggest running hg merge when new heads are on different branches...
 r13803 $ hg branch branchC
marked working directory as branch branchC
Mads Kiilerich
check-code: fix check for trailing whitespace on sh command lines...
 r17345 $ echo b1 > bar
Kevin Berridge
pull: new output message when there are multiple branches...
 r13804 $ hg ci -Am "commit on branchC on tt"
Kevin Berridge
pull: don't suggest running hg merge when new heads are on different branches...
 r13803 adding bar
Make changes on default branch on t
$ cd ../t
$ hg up -C default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Mads Kiilerich
check-code: fix check for trailing whitespace on sh command lines...
 r17345 $ echo a1 > bar
Kevin Berridge
pull: new output message when there are multiple branches...
 r13804 $ hg ci -Am "commit on default on t"
Kevin Berridge
pull: don't suggest running hg merge when new heads are on different branches...
 r13803 adding bar
Pull branchC from tt
$ hg pull ../tt
pulling from ../tt
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
(run 'hg heads' to see heads)
Kevin Berridge
pull: new output message when there are multiple branches...
 r13804
Make changes on default and branchC on tt
$ cd ../tt
$ hg pull ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
(run 'hg heads' to see heads)
$ hg up -C default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a1 > bar1
$ hg ci -Am "commit on default on tt"
adding bar1
$ hg up branchC
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo a1 > bar2
$ hg ci -Am "commit on branchC on tt"
adding bar2
Make changes on default and branchC on t
$ cd ../t
$ hg up default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a1 > bar3
$ hg ci -Am "commit on default on t"
adding bar3
$ hg up branchC
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo a1 > bar4
$ hg ci -Am "commit on branchC on tt"
adding bar4
Pull from tt
$ hg pull ../tt
pulling from ../tt
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files (+2 heads)
(run 'hg heads .' to see heads, 'hg merge' to merge)
Mads Kiilerich
tests: add missing trailing 'cd ..'...
 r16913
$ cd ..