##// END OF EJS Templates
branchmap-v3: filter topo heads using node for performance reason...
branchmap-v3: filter topo heads using node for performance reason The branchmap currently contains heads as nodeid. If we build a set of revnum with the topological heads, we need to turn the nodeid in the branchmap to revnum to be able to check if they are topo-heads. That nodeid → revnum lookup is "expensive" and adds up to something noticeable if you do it hundreds of thousand of time. Instead we turn all the topo-heads revnums into nodes and build a set. So we can directly test membership of the nodeids stored in the branchmap. That is much faster. Ideally we would have revnum in the branchmap and could directly test revnum against a revnum set and that would be even faster. However that's an adventure for another time. Without this change, the branchmap format "v3" was significantly slower than the "v2" format. With this changes, some of that gap is recovered With rust + persistent nodemap, this overhead was smaller because the extra lookup did not had to to build the nodemap from scratch. In addition the mozilla-unified repository is able to use the "pure_top" mode of branchmap v3, so it was not really affected by this. Future changeset will work of the remaining of the performance gap. ### benchmark.name = hg.command.unbundle # bin-env-vars.hg.py-re2-module = default # benchmark.variants.issue6528 = disabled # benchmark.variants.resource-usage = default # benchmark.variants.reuse-external-delta-parent = yes # benchmark.variants.revs = any-1-extra-rev # benchmark.variants.source = unbundle # benchmark.variants.validate = default # benchmark.variants.verbosity = quiet ## data-env-vars.name = netbeans-2018-08-01-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.233711 ~~~~~ branch-v3 before: 0.380994 (+63.02%, +0.15) branch-v3 after: 0.368769 (+57.79%, +0.14) # bin-env-vars.hg.flavor = rust branch-v2: 0.235230 ~~~~~ branch-v3 before: 0.385060 (+63.70%, +0.15) branch-v3 after: 0.372460 (+58.34%, +0.14) ## data-env-vars.name = netbeans-2018-08-01-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.255586 ~~~~~ branch-v3 before: 0.317524 (+24.23%, +0.06) branch-v3 after: 0.318907 (+24.78%, +0.06) ## data-env-vars.name = mozilla-central-2024-03-22-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.339010 ~~~~~ branch-v3 before: 0.410007 (+20.94%, +0.07) branch-v3 after: 0.349752 (+3.17%, +0.01) # bin-env-vars.hg.flavor = rust branch-v2: 0.346525 ~~~~~ branch-v3 before: 0.410428 (+18.44%, +0.06) branch-v3 after: 0.354300 (+2.24%, +0.01) ## data-env-vars.name = mozilla-central-2024-03-22-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.380202 ~~~~~ branch-v3 before: 0.393871 (+3.60%, +0.01) branch-v3 after: 0.396293 (+4.23%, +0.02) ## data-env-vars.name = mozilla-unified-2024-03-22-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 0.412165 ~~~~~ branch-v3 before: 0.438105 (+6.29%, +0.03) branch-v3 after: 0.424769 (+3.06%, +0.01) # bin-env-vars.hg.flavor = rust branch-v2: 0.412397 ~~~~~ branch-v3 before: 0.438405 (+6.31%, +0.03) branch-v3 after: 0.421796 (+2.28%, +0.01) ## data-env-vars.name = mozilla-unified-2024-03-22-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 0.429501 ~~~~~ branch-v3 before: 0.452692 (+5.40%, +0.02) branch-v3 after: 0.443849 (+3.34%, +0.01) ## data-env-vars.name = mozilla-try-2024-03-26-zstd-sparse-revlog # bin-env-vars.hg.flavor = default branch-v2: 3.403171 ~~~~~ branch-v3 before: 6.562345 (+92.83%, +3.16) branch-v3 after: 6.234055 (+83.18%, +2.83) # bin-env-vars.hg.flavor = rust branch-v2: 3.454876 ~~~~~ branch-v3 before: 6.160248 (+78.31%, +2.71) branch-v3 after: 6.307813 (+82.58%, +2.85) ## data-env-vars.name = mozilla-try-2024-03-26-ds2-pnm # bin-env-vars.hg.flavor = rust branch-v2: 3.465435 ~~~~~ branch-v3 before: 5.381648 (+55.30%, +1.92) branch-v3 after: 5.176076 (+49.36%, +1.71)

File last commit:

r52756:f4733654 default
r52869:41b8892a default
Show More
revlog.py
64 lines | 2.4 KiB | text/x-python | PythonLexer
Matt Harbison
typing: add `from __future__ import annotations` to most files...
r52756 from __future__ import annotations
test: extract some generic data and utility from test-rust-ancestor.py...
r44397 import unittest
# picked from test-parse-index2, copied rather than imported
# so that it stays stable even if test-parse-index2 changes or disappears.
data_non_inlined = (
b'\x00\x00\x00\x01\x00\x00\x00\x00\x00\x01D\x19'
b'\x00\x07e\x12\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff'
b'\xff\xff\xff\xff\xd1\xf4\xbb\xb0\xbe\xfc\x13\xbd\x8c\xd3\x9d'
b'\x0f\xcd\xd9;\x8c\x07\x8cJ/\x00\x00\x00\x00\x00\x00\x00\x00\x00'
b'\x00\x00\x00\x00\x00\x00\x01D\x19\x00\x00\x00\x00\x00\xdf\x00'
b'\x00\x01q\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff'
b'\xff\xff\xff\xc1\x12\xb9\x04\x96\xa4Z1t\x91\xdfsJ\x90\xf0\x9bh'
b'\x07l&\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
b'\x00\x01D\xf8\x00\x00\x00\x00\x01\x1b\x00\x00\x01\xb8\x00\x00'
b'\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\x02\n'
b'\x0e\xc6&\xa1\x92\xae6\x0b\x02i\xfe-\xe5\xbao\x05\xd1\xe7\x00'
b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01F'
b'\x13\x00\x00\x00\x00\x01\xec\x00\x00\x03\x06\x00\x00\x00\x01'
b'\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x12\xcb\xeby1'
b'\xb6\r\x98B\xcb\x07\xbd`\x8f\x92\xd9\xc4\x84\xbdK\x00\x00\x00'
b'\x00\x00\x00\x00\x00\x00\x00\x00\x00'
)
Georges Racinet
rust-index: using the `hg::index::Index` in ancestors iterator and lazy set...
r52132 from ..revlogutils.constants import REVLOGV1
test: extract some generic data and utility from test-rust-ancestor.py...
r44397
try:
Matt Harbison
typing: disable import error warnings that are already handled...
r47543 from ..cext import parsers as cparsers # pytype: disable=import-error
test: extract some generic data and utility from test-rust-ancestor.py...
r44397 except ImportError:
cparsers = None
Georges Racinet
rust-index: using the `hg::index::Index` in ancestors iterator and lazy set...
r52132 try:
Georges Racinet on incendie.racinet.fr
rust-index: renamed `MixedIndex` as `Index`...
r52147 from ..rustext.revlog import ( # pytype: disable=import-error
Index as RustIndex,
)
Georges Racinet
rust-index: using the `hg::index::Index` in ancestors iterator and lazy set...
r52132 except ImportError:
Georges Racinet on incendie.racinet.fr
rust-index: renamed `MixedIndex` as `Index`...
r52147 RustIndex = None
Georges Racinet
rust-index: using the `hg::index::Index` in ancestors iterator and lazy set...
r52132
test: extract some generic data and utility from test-rust-ancestor.py...
r44397
@unittest.skipIf(
cparsers is None,
'The C version of the "parsers" module is not available. It is needed for this test.',
)
class RevlogBasedTestBase(unittest.TestCase):
Georges Racinet
rust-index: using the `hg::index::Index` in ancestors iterator and lazy set...
r52132 def parseindex(self, data=None):
if data is None:
data = data_non_inlined
return cparsers.parse_index2(data, False)[0]
Georges Racinet on incendie.racinet.fr
rust-python-testing: separated base test classes...
r52137
@unittest.skipIf(
Georges Racinet on incendie.racinet.fr
rust-index: renamed `MixedIndex` as `Index`...
r52147 RustIndex is None,
Georges Racinet on incendie.racinet.fr
rust-python-testing: separated base test classes...
r52137 'The Rust index is not available. It is needed for this test.',
)
class RustRevlogBasedTestBase(unittest.TestCase):
Georges Racinet
rust-index: using the `hg::index::Index` in ancestors iterator and lazy set...
r52132 def parserustindex(self, data=None):
if data is None:
data = data_non_inlined
Georges Racinet on incendie.racinet.fr
rust-python-testing: separated base test classes...
r52137 # not inheriting RevlogBasedTestCase to avoid having a
# `parseindex` method that would be shadowed by future subclasses
# this duplication will soon be removed
Georges Racinet on incendie.racinet.fr
rust-index: renamed `MixedIndex` as `Index`...
r52147 return RustIndex(data, REVLOGV1)