##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

hgweb: do not ignore [auth] if url has a username (issue2822)...
hgweb: do not ignore [auth] if url has a username (issue2822) The [auth] section was ignored when handling URLs like: http://user@example.com/foo Instead, we look in [auth] for an entry matching the URL and supplied user name. Entries without username can match URL with a username. Prefix length ties are resolved in favor of entries matching the username. With: foo.prefix = http://example.org foo.username = user foo.password = password bar.prefix = http://example.org/bar and the input URL: http://user@example.org/bar the 'bar' entry will be selected because of prefix length, therefore prompting for a password. This behaviour ensure that entries selection is consistent when looking for credentials or for certificates, and that certificates can be picked even if their entries do no define usernames while the URL does. Additionally, entries without a username matched against a username are returned as if they did have requested username set to avoid prompting again for a username if the password is not set. v2: reparse the URL in readauthforuri() to handle HTTP and HTTPS similarly. v3: allow unset usernames to match URL usernames to pick certificates. Resolve prefix length ties in favor of entries with usernames.
Martin Geisler - - Load All Authors

File last commit:

r14464:00256f68 default
r15005:4a43e23b 1.9.1 stable
Show More
test-mq-guards.t
436 lines | 7.1 KiB | text/troff | Tads3Lexer
/ tests / test-mq-guards.t
History | Source | Raw |Copy content |Copy permalink
Nicolas Dumazet
tests: unify test-mq-guards
 r11896 $ echo "[extensions]" >> $HGRCPATH
$ echo "mq=" >> $HGRCPATH
$ hg init
$ hg qinit
$ echo x > x
$ hg ci -Ama
adding x
$ hg qnew a.patch
$ echo a > a
$ hg add a
$ hg qrefresh
$ hg qnew b.patch
$ echo b > b
$ hg add b
$ hg qrefresh
$ hg qnew c.patch
$ echo c > c
$ hg add c
$ hg qrefresh
$ hg qpop -a
popping c.patch
popping b.patch
popping a.patch
patch queue now empty
should fail
$ hg qguard does-not-exist.patch +bleh
abort: no patch named does-not-exist.patch
Matt Mackall
tests: add exit codes to unified tests
 r12316 [255]
Nicolas Dumazet
tests: unify test-mq-guards
 r11896
should fail
$ hg qguard +fail
abort: no patches applied
Matt Mackall
tests: add exit codes to unified tests
 r12316 [255]
Nicolas Dumazet
tests: unify test-mq-guards
 r11896
$ hg qpush
applying a.patch
now at: a.patch
should guard a.patch
$ hg qguard +a
should print +a
$ hg qguard
a.patch: +a
$ hg qpop
popping a.patch
patch queue now empty
should fail
$ hg qpush a.patch
Martin Geisler
mq: print "'foo' 'bar'", not "['foo', 'bar']" when showing guards...
 r14464 cannot push 'a.patch' - guarded by '+a'
Matt Mackall
tests: add exit codes to unified tests
 r12316 [1]
Nicolas Dumazet
tests: unify test-mq-guards
 r11896
$ hg qguard a.patch
a.patch: +a
should push b.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpop
popping b.patch
patch queue now empty
test selection of an empty guard
$ hg qselect ""
abort: guard cannot be an empty string
Matt Mackall
tests: add exit codes to unified tests
 r12316 [255]
Nicolas Dumazet
tests: unify test-mq-guards
 r11896 $ hg qselect a
number of unguarded, unapplied patches has changed from 2 to 3
should push a.patch
$ hg qpush
applying a.patch
now at: a.patch
$ hg qguard -- c.patch -a
should print -a
$ hg qguard c.patch
c.patch: -a
should skip c.patch
$ hg qpush -a
applying b.patch
skipping c.patch - guarded by '-a'
now at: b.patch
should display b.patch
$ hg qtop
b.patch
$ hg qguard -n c.patch
should push c.patch
$ hg qpush -a
applying c.patch
now at: c.patch
$ hg qpop -a
popping c.patch
popping b.patch
popping a.patch
patch queue now empty
$ hg qselect -n
guards deactivated
number of unguarded, unapplied patches has changed from 3 to 2
should push all
$ hg qpush -a
applying b.patch
applying c.patch
now at: c.patch
$ hg qpop -a
popping c.patch
popping b.patch
patch queue now empty
$ hg qguard a.patch +1
$ hg qguard b.patch +2
$ hg qselect 1
number of unguarded, unapplied patches has changed from 1 to 2
should push a.patch, not b.patch
$ hg qpush
applying a.patch
now at: a.patch
$ hg qpush
applying c.patch
now at: c.patch
$ hg qpop -a
popping c.patch
popping a.patch
patch queue now empty
$ hg qselect 2
should push b.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpush -a
applying c.patch
now at: c.patch
Used to be an issue with holes in the patch sequence
So, put one hole on the base and ask for topmost patch.
$ hg qtop
c.patch
$ hg qpop -a
popping c.patch
popping b.patch
patch queue now empty
$ hg qselect 1 2
number of unguarded, unapplied patches has changed from 2 to 3
should push a.patch, b.patch
$ hg qpush
applying a.patch
now at: a.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpop -a
popping b.patch
popping a.patch
patch queue now empty
$ hg qguard -- a.patch +1 +2 -3
$ hg qselect 1 2 3
number of unguarded, unapplied patches has changed from 3 to 2
list patches and guards
$ hg qguard -l
a.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
have at least one patch applied to test coloring
$ hg qpush
applying b.patch
now at: b.patch
list patches and guards with color
$ hg --config extensions.color= qguard --config color.mode=ansi \
> -l --color=always
Mads Kiilerich
tests: use (esc) for all non-ASCII test output
 r12942 \x1b[0;30;1ma.patch\x1b[0m: \x1b[0;33m+1\x1b[0m \x1b[0;33m+2\x1b[0m \x1b[0;31m-3\x1b[0m (esc)
\x1b[0;34;1;4mb.patch\x1b[0m: \x1b[0;33m+2\x1b[0m (esc)
\x1b[0;30;1mc.patch\x1b[0m: \x1b[0;32munguarded\x1b[0m (esc)
Nicolas Dumazet
tests: unify test-mq-guards
 r11896
should pop b.patch
$ hg qpop
popping b.patch
patch queue now empty
list series
$ hg qseries -v
0 G a.patch
1 U b.patch
2 U c.patch
list guards
$ hg qselect
1
2
3
should push b.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpush -a
applying c.patch
now at: c.patch
$ hg qselect -n --reapply
guards deactivated
popping guarded patches
popping c.patch
popping b.patch
patch queue now empty
reapplying unguarded patches
applying c.patch
now at: c.patch
guards in series file: +1 +2 -3
$ hg qselect -s
+1
+2
-3
should show c.patch
$ hg qapplied
c.patch
$ hg qrename a.patch new.patch
should show :
new.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
$ hg qguard -l
new.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
$ hg qnew d.patch
$ hg qpop
popping d.patch
now at: c.patch
should show new.patch and b.patch as Guarded, c.patch as Applied
and d.patch as Unapplied
$ hg qseries -v
0 G new.patch
1 G b.patch
2 A c.patch
3 U d.patch
qseries again, but with color
Danek Duvall
color: add support for terminfo-based attributes and color...
 r13987 $ hg --config extensions.color= --config color.mode=ansi qseries -v --color=always
Mads Kiilerich
tests: use (esc) for all non-ASCII test output
 r12942 0 G \x1b[0;30;1mnew.patch\x1b[0m (esc)
1 G \x1b[0;30;1mb.patch\x1b[0m (esc)
2 A \x1b[0;34;1;4mc.patch\x1b[0m (esc)
3 U \x1b[0;30;1md.patch\x1b[0m (esc)
Nicolas Dumazet
tests: unify test-mq-guards
 r11896
$ hg qguard d.patch +2
new.patch, b.patch: Guarded. c.patch: Applied. d.patch: Guarded.
$ hg qseries -v
0 G new.patch
1 G b.patch
2 A c.patch
3 G d.patch
$ qappunappv()
> {
> for command in qapplied "qapplied -v" qunapplied "qunapplied -v"; do
> echo % hg $command
> hg $command
> done
> }
$ hg qpop -a
popping c.patch
patch queue now empty
$ hg qguard -l
new.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
d.patch: +2
$ qappunappv
% hg qapplied
% hg qapplied -v
% hg qunapplied
c.patch
% hg qunapplied -v
0 G new.patch
1 G b.patch
2 U c.patch
3 G d.patch
$ hg qselect 1
number of unguarded, unapplied patches has changed from 1 to 2
$ qappunappv
% hg qapplied
% hg qapplied -v
% hg qunapplied
new.patch
c.patch
% hg qunapplied -v
0 U new.patch
1 G b.patch
2 U c.patch
3 G d.patch
$ hg qpush -a
applying new.patch
Martin Geisler
mq: print "'foo' 'bar'", not "['foo', 'bar']" when showing guards...
 r14464 skipping b.patch - guarded by '+2'
Nicolas Dumazet
tests: unify test-mq-guards
 r11896 applying c.patch
Martin Geisler
mq: print "'foo' 'bar'", not "['foo', 'bar']" when showing guards...
 r14464 skipping d.patch - guarded by '+2'
Nicolas Dumazet
tests: unify test-mq-guards
 r11896 now at: c.patch
$ qappunappv
% hg qapplied
new.patch
c.patch
% hg qapplied -v
0 A new.patch
1 G b.patch
2 A c.patch
% hg qunapplied
% hg qunapplied -v
3 G d.patch
$ hg qselect 2
number of unguarded, unapplied patches has changed from 0 to 1
number of guarded, applied patches has changed from 1 to 0
$ qappunappv
% hg qapplied
new.patch
c.patch
% hg qapplied -v
0 A new.patch
1 U b.patch
2 A c.patch
% hg qunapplied
d.patch
% hg qunapplied -v
3 U d.patch
$ for patch in `hg qseries`; do
> echo % hg qapplied $patch
> hg qapplied $patch
> echo % hg qunapplied $patch
> hg qunapplied $patch
> done
% hg qapplied new.patch
new.patch
% hg qunapplied new.patch
b.patch
d.patch
% hg qapplied b.patch
new.patch
% hg qunapplied b.patch
d.patch
% hg qapplied c.patch
new.patch
c.patch
% hg qunapplied c.patch
d.patch
% hg qapplied d.patch
new.patch
c.patch
% hg qunapplied d.patch
hg qseries -m: only b.patch should be shown
the guards file was not ignored in the past
$ hg qdelete -k b.patch
$ hg qseries -m
b.patch
hg qseries -m with color
Danek Duvall
color: add support for terminfo-based attributes and color...
 r13987 $ hg --config extensions.color= --config color.mode=ansi qseries -m --color=always
Mads Kiilerich
tests: use (esc) for all non-ASCII test output
 r12942 \x1b[0;31;1mb.patch\x1b[0m (esc)