upstream/mercurial-mirror Files · tests/test-mq-subrepo-svn.t

bisect: avoid adding irrelevant revisions to bisect state...

bisect: avoid adding irrelevant revisions to bisect state When adding new revisions to the bisect state, it only makes sense to add information about revisions that are under consideration (i.e., those that are topologically between the known good and bad revisions). However, if the user passes in a revset (e.g., '!merge()' to exclude merge commits), hg will resolve the revset first and add all matching revisions to the bisect state (which in this case would likely be the majority of revisions in the repo). To avoid this, revisions should only be added to the bisect state if they are between the good and bad revisions (and therefore relevant to the bisection). -- Here are the results of some performance tests using the `mozilla-central` repo (since it is one of the largest freely-available hg repositories in the wild). These tests compare the performance of a locally-built `hg` before and after application of this series. Note that `--noupdate` is passed to avoid including update time (which should not vary across cases). Setup (run between each test): $ hg bisect --reset $ hg bisect --noupdate --bad $ hg bisect --noupdate --good Test using a revset that returns a very large number of revisions: $ time hg bisect --noupdate --skip '!merge()' > /dev/null Before: real 0m9.398s user 0m9.233s sys 0m0.120s After: real 0m1.513s user 0m1.425s sys 0m0.052s Test using a revset that is expensive to compute: $ time hg bisect --noupdate --skip 'desc("Bug")' > /dev/null Before: real 0m49.853s user 0m49.580s sys 0m0.243s After: real 0m4.120s user 0m4.036s sys 0m0.048s

Arun Kulshreshtha - - Load All Authors

File last commit:

r50311:075a5530 default


                r50337:81623652

default

Download file

             test-mq-subrepo-svn.t
        
                    52 lines
            
             | 1.0 KiB
            
                | text/troff
            
             |
                Tads3Lexer
            
             / tests / test-mq-subrepo-svn.t
          
                    History
                
                 |
                  Source
                 | Raw
                 |Copy content
                 |Copy permalink

        Matt Mackall
    
tests: replace exit 80 with #require

              r22046
            
      #require svn13

        Kevin Bullock
    
subrepo: separate out mq+svn subrepo tests...

              r13300
            
        Yuya Nishihara
    
tests: write hgrc of more than two lines by using shell heredoc...

              r23172
            
        $ cat <<EOF >> $HGRCPATH

        > [extensions]

        > mq =

        > [diff]

        > nodates = 1

        Yuya Nishihara
    
subrepo: disable git and svn subrepos by default (BC) (SEC)...

              r34988
            
        > [subrepos]

        Gregory Szorc
    
subrepo: use per-type config options to enable subrepos...

              r34990
            
        > allowed = true

        > svn:allowed = true

        Yuya Nishihara
    
tests: write hgrc of more than two lines by using shell heredoc...

              r23172
            
        > EOF

        Kevin Bullock
    
subrepo: separate out mq+svn subrepo tests...

              r13300
            
        Kevin Bullock
    
test-subrepo-mq-svn.t: correct comment...

              r13326
            
      fn to create new repository, and cd into it

        Kevin Bullock
    
subrepo: separate out mq+svn subrepo tests...

              r13300
            
        $ mkrepo() {

        >     hg init $1

        >     cd $1

        >     hg qinit

        > }

      handle svn subrepos safely

        $ svnadmin create svn-repo-2499

        Mads Kiilerich
    
tests: cleanup of svn url handling...

              r17033
            
        $ SVNREPOPATH=`pwd`/svn-repo-2499/project

        Matt Harbison
    
tests: quote $PYTHON for py3 support on Windows

              r41637
            
        $ SVNREPOURL="`"$PYTHON" $TESTDIR/svnurlof.py \"$SVNREPOPATH\"`"

        Mads Kiilerich
    
tests: cleanup of svn url handling...

              r17033
            
        Kevin Bullock
    
subrepo: separate out mq+svn subrepo tests...

              r13300
            
        $ mkdir -p svn-project-2499/trunk

        Yuya Nishihara
    
tests: suppress verbose output of svn transaction...

              r26374
            
        $ svn import -qm 'init project' svn-project-2499 "$SVNREPOURL"

        Kevin Bullock
    
subrepo: separate out mq+svn subrepo tests...

              r13300
            
      qnew on repo w/svn subrepo

        $ mkrepo repo-2499-svn-subrepo

        Mads Kiilerich
    
tests: cleanup of svn url handling...

              r17033
            
        $ svn co "$SVNREPOURL"/trunk sub

        Kevin Bullock
    
subrepo: separate out mq+svn subrepo tests...

              r13300
            
        Checked out revision 1.

        $ echo 'sub = [svn]sub' >> .hgsub

        $ hg add .hgsub

        Matt Mackall
    
tests: fixes for svn 1.4.2

              r13410
            
        $ hg status -S -X '**/format'

        Kevin Bullock
    
subrepo: separate out mq+svn subrepo tests...

              r13300
            
        A .hgsub

        $ hg qnew -m0 0.diff

        $ cd sub

        Arun Kulshreshtha
    
tests: work around libmagic bug in svn subrepo tests...

              r50311
            
        $ echo foo > a

        Kevin Bullock
    
subrepo: separate out mq+svn subrepo tests...

              r13300
            
        $ svn add a

        A         a

        $ svn st

        Matt Mackall
    
tests: fixes for svn 1.4.2

              r13410
            
        A*    a (glob)

        Kevin Bullock
    
subrepo: separate out mq+svn subrepo tests...

              r13300
            
        $ cd ..

        $ hg status -S        # doesn't show status for svn subrepos (yet)

        $ hg qnew -m1 1.diff

        Matt Harbison
    
subrepo: make the output references to subrepositories consistent...

              r33365
            
        abort: uncommitted changes in subrepository "sub"

        Kevin Bullock
    
subrepo: separate out mq+svn subrepo tests...

              r13300
            
        [255]

        Mads Kiilerich
    
tests: add missing trailing 'cd ..'...

              r16913
            
        $ cd ..

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Repositories
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages

Matt Mackall tests: replace exit 80 with #require	r22046	#require svn13
Kevin Bullock subrepo: separate out mq+svn subrepo tests...	r13300
Yuya Nishihara tests: write hgrc of more than two lines by using shell heredoc...	r23172	$ cat <<EOF >> $HGRCPATH
		> [extensions]
		> mq =
		> [diff]
		> nodates = 1
Yuya Nishihara subrepo: disable git and svn subrepos by default (BC) (SEC)...	r34988	> [subrepos]
Gregory Szorc subrepo: use per-type config options to enable subrepos...	r34990	> allowed = true
		> svn:allowed = true
Yuya Nishihara tests: write hgrc of more than two lines by using shell heredoc...	r23172	> EOF
Kevin Bullock subrepo: separate out mq+svn subrepo tests...	r13300
Kevin Bullock test-subrepo-mq-svn.t: correct comment...	r13326	fn to create new repository, and cd into it
Kevin Bullock subrepo: separate out mq+svn subrepo tests...	r13300	$ mkrepo() {
		> hg init $1
		> cd $1
		> hg qinit
		> }


		handle svn subrepos safely

		$ svnadmin create svn-repo-2499
Mads Kiilerich tests: cleanup of svn url handling...	r17033
		$ SVNREPOPATH=`pwd`/svn-repo-2499/project
Matt Harbison tests: quote $PYTHON for py3 support on Windows	r41637	$ SVNREPOURL="`"$PYTHON" $TESTDIR/svnurlof.py \"$SVNREPOPATH\"`"
Mads Kiilerich tests: cleanup of svn url handling...	r17033
Kevin Bullock subrepo: separate out mq+svn subrepo tests...	r13300	$ mkdir -p svn-project-2499/trunk
Yuya Nishihara tests: suppress verbose output of svn transaction...	r26374	$ svn import -qm 'init project' svn-project-2499 "$SVNREPOURL"
Kevin Bullock subrepo: separate out mq+svn subrepo tests...	r13300
		qnew on repo w/svn subrepo
		$ mkrepo repo-2499-svn-subrepo
Mads Kiilerich tests: cleanup of svn url handling...	r17033	$ svn co "$SVNREPOURL"/trunk sub
Kevin Bullock subrepo: separate out mq+svn subrepo tests...	r13300	Checked out revision 1.
		$ echo 'sub = [svn]sub' >> .hgsub
		$ hg add .hgsub
Matt Mackall tests: fixes for svn 1.4.2	r13410	$ hg status -S -X '**/format'
Kevin Bullock subrepo: separate out mq+svn subrepo tests...	r13300	A .hgsub
		$ hg qnew -m0 0.diff
		$ cd sub
Arun Kulshreshtha tests: work around libmagic bug in svn subrepo tests...	r50311	$ echo foo > a
Kevin Bullock subrepo: separate out mq+svn subrepo tests...	r13300	$ svn add a
		A a
		$ svn st
Matt Mackall tests: fixes for svn 1.4.2	r13410	A* a (glob)
Kevin Bullock subrepo: separate out mq+svn subrepo tests...	r13300	$ cd ..
		$ hg status -S # doesn't show status for svn subrepos (yet)
		$ hg qnew -m1 1.diff
Matt Harbison subrepo: make the output references to subrepositories consistent...	r33365	abort: uncommitted changes in subrepository "sub"
Kevin Bullock subrepo: separate out mq+svn subrepo tests...	r13300	[255]
Mads Kiilerich tests: add missing trailing 'cd ..'...	r16913
		$ cd ..