##// END OF EJS Templates
parselist: move the function from config to stringutil...
parselist: move the function from config to stringutil We move the function in a lower level module to avoid cycle. It moves next to `parsebool` who had to migrate for the same reasons. Differential Revision: https://phab.mercurial-scm.org/D10449

File last commit:

r45328:5835018c stable
r47960:b0e92313 default
Show More
bash_completion
659 lines | 14.9 KiB | application/x-sh | BashLexer
Bryan O'Sullivan
bash_completion: tell an editor what type of file this is
r18769 # bash completion for the Mercurial distributed SCM -*- sh -*-
Martin Geisler
setup: backout 68964567e406...
r10028
# Docs:
#
# If you source this file from your .bashrc, bash should be able to
# complete a command line that uses hg with all the available commands
# and options and sometimes even arguments.
#
# Mercurial allows you to define additional commands through extensions.
# Bash should be able to automatically figure out the name of these new
# commands and their options. See below for how to define _hg_opt_foo
# and _hg_cmd_foo functions to fine-tune the completion for option and
# non-option arguments, respectively.
#
#
# Notes about completion for specific commands:
#
# - the completion function for the email command from the patchbomb
# extension will try to call _hg_emails to get a list of e-mail
# addresses. It's up to the user to define this function. For
# example, put the addresses of the lists that you usually patchbomb
# in ~/.patchbomb-to and the addresses that you usually use to send
# the patchbombs in ~/.patchbomb-from and use something like this:
#
# _hg_emails()
# {
# if [ -r ~/.patchbomb-$1 ]; then
# cat ~/.patchbomb-$1
# fi
# }
#
#
# Writing completion functions for additional commands:
#
# If it exists, the function _hg_cmd_foo will be called without
# arguments to generate the completion candidates for the hg command
# "foo". If the command receives some arguments that aren't options
# even though they start with a "-", you can define a function called
# _hg_opt_foo to generate the completion candidates. If _hg_opt_foo
# doesn't return 0, regular completion for options is attempted.
#
# In addition to the regular completion variables provided by bash,
# the following variables are also set:
# - $hg - the hg program being used (e.g. /usr/bin/hg)
# - $cmd - the name of the hg command being completed
# - $cmd_index - the index of $cmd in $COMP_WORDS
# - $cur - the current argument being completed
# - $prev - the argument before $cur
# - $global_args - "|"-separated list of global options that accept
# an argument (e.g. '--cwd|-R|--repository')
# - $canonical - 1 if we canonicalized $cmd before calling the function
# 0 otherwise
#
shopt -s extglob
Brodie Rao
bash/zsh completion: use HGPLAIN when invoking hg (issue2297)
r11646 _hg_cmd()
{
HGPLAIN=1 "$hg" "$@" 2>/dev/null
}
Martin Geisler
setup: backout 68964567e406...
r10028 _hg_commands()
{
local commands
"Yann E. MORIN"
bash_completion: enable alias auto-complete...
r14374 commands="$(HGPLAINEXCEPT=alias _hg_cmd debugcomplete "$cur")" || commands=""
Martin Geisler
setup: backout 68964567e406...
r10028 COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$commands' -- "$cur"))
}
_hg_paths()
{
Thomas Arendsen Hein
bash_completion: Use "hg paths -q" instead of piping through sed
r14332 local paths="$(_hg_cmd paths -q)"
Martin Geisler
setup: backout 68964567e406...
r10028 COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$paths' -- "$cur"))
}
_hg_repos()
{
local i
for i in $(compgen -d -- "$cur"); do
Sean Farley
bash_completion: untabify
r20123 test ! -d "$i"/.hg || COMPREPLY=(${COMPREPLY[@]:-} "$i")
Martin Geisler
setup: backout 68964567e406...
r10028 done
}
Bryan O'Sullivan
completion: selectively use debugpathcomplete in bash_completion...
r18793 _hg_debugpathcomplete()
{
local files="$(_hg_cmd debugpathcomplete $1 "$cur")"
local IFS=$'\n'
COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$files' -- "$cur"))
}
Martin Geisler
setup: backout 68964567e406...
r10028 _hg_status()
{
Mathias De Maré
bashcompletion: allow skipping completion for 'hg status'...
r30199 if [ -z "$HGCOMPLETE_NOSTATUS" ]; then
local files="$(_hg_cmd status -n$1 "glob:$cur**")"
local IFS=$'\n'
COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$files' -- "$cur"))
fi
Martin Geisler
setup: backout 68964567e406...
r10028 }
Sean Farley
bash_completion: add _hg_branches for list of branches
r20131 _hg_branches()
{
local branches="$(_hg_cmd branches -q)"
local IFS=$'\n'
COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$branches' -- "$cur"))
}
Kevin Bullock
bash_completion: complete bookmarks...
r13509 _hg_bookmarks()
{
local bookmarks="$(_hg_cmd bookmarks -q)"
local IFS=$'\n'
COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$bookmarks' -- "$cur"))
}
_hg_labels()
{
Sean Farley
debugnamecomplete: rename from debuglabelcomplete...
r23762 local labels="$(_hg_cmd debugnamecomplete "$cur")"
Bryan O'Sullivan
completion: add a debuglabelcomplete command...
r18790 local IFS=$'\n'
COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$labels' -- "$cur"))
Kevin Bullock
bash_completion: complete bookmarks...
r13509 }
Martin Geisler
setup: backout 68964567e406...
r10028 # this is "kind of" ugly...
_hg_count_non_option()
{
local i count=0
local filters="$1"
for ((i=1; $i<=$COMP_CWORD; i++)); do
Sean Farley
bash_completion: untabify
r20123 if [[ "${COMP_WORDS[i]}" != -* ]]; then
if [[ ${COMP_WORDS[i-1]} == @($filters|$global_args) ]]; then
continue
fi
count=$(($count + 1))
fi
Martin Geisler
setup: backout 68964567e406...
r10028 done
echo $(($count - 1))
}
Sean Farley
bash_completion: fix issue with subdirectories not being completed...
r20126 _hg_fix_wordlist()
{
local LASTCHAR=' '
if [ ${#COMPREPLY[@]} = 1 ]; then
[ -d "$COMPREPLY" ] && LASTCHAR=/
COMPREPLY=$(printf %q%s "$COMPREPLY" "$LASTCHAR")
else
for ((i=0; i < ${#COMPREPLY[@]}; i++)); do
[ -d "${COMPREPLY[$i]}" ] && COMPREPLY[$i]=${COMPREPLY[$i]}/
done
fi
}
Martin Geisler
setup: backout 68964567e406...
r10028 _hg()
{
Sean Farley
bash_completion: determine root executable in case of alias...
r20125 local cur prev cmd cmd_index opts i aliashg
Martin Geisler
setup: backout 68964567e406...
r10028 # global options that receive an argument
av6
bash_completion: add more global options that receive an argument
r39435 local global_args='--cwd|-R|--repository|--color|--config|--encoding|--encodingmode|--pager'
Martin Geisler
setup: backout 68964567e406...
r10028 local hg="$1"
local canonical=0
Sean Farley
bash_completion: determine root executable in case of alias...
r20125 aliashg=$(alias $hg 2>/dev/null)
if [[ -n "$aliashg" ]]; then
aliashg=${aliashg#"alias $hg='"}
aliashg=${aliashg%"'"}
Peter Arrenbrecht
bash_completion: do not use aliased hg if it sources a script (issue6308)...
r45338 # `source`d aliases break completion, so ignore them
if [[ "${aliashg:0:7}" != "source " ]]; then
hg=$aliashg
fi
Sean Farley
bash_completion: determine root executable in case of alias...
r20125 fi
Martin Geisler
setup: backout 68964567e406...
r10028 COMPREPLY=()
cur="$2"
prev="$3"
# searching for the command
# (first non-option argument that doesn't follow a global option that
# receives an argument)
for ((i=1; $i<=$COMP_CWORD; i++)); do
Sean Farley
bash_completion: untabify
r20123 if [[ ${COMP_WORDS[i]} != -* ]]; then
if [[ ${COMP_WORDS[i-1]} != @($global_args) ]]; then
cmd="${COMP_WORDS[i]}"
cmd_index=$i
break
fi
fi
Martin Geisler
setup: backout 68964567e406...
r10028 done
if [[ "$cur" == -* ]]; then
Sean Farley
bash_completion: untabify
r20123 if [ "$(type -t "_hg_opt_$cmd")" = function ] && "_hg_opt_$cmd"; then
Sean Farley
bash_completion: fix issue with subdirectories not being completed...
r20126 _hg_fix_wordlist
Sean Farley
bash_completion: untabify
r20123 return
fi
Martin Geisler
setup: backout 68964567e406...
r10028
Martijn Pieters
bashcompletion: show available command-line switches for aliases...
r29386 opts=$(HGPLAINEXCEPT=alias _hg_cmd debugcomplete --options "$cmd")
Martin Geisler
setup: backout 68964567e406...
r10028
Sean Farley
bash_completion: untabify
r20123 COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$opts' -- "$cur"))
Sean Farley
bash_completion: fix issue with subdirectories not being completed...
r20126 _hg_fix_wordlist
Sean Farley
bash_completion: untabify
r20123 return
Martin Geisler
setup: backout 68964567e406...
r10028 fi
# global options
case "$prev" in
Sean Farley
bash_completion: untabify
r20123 -R|--repository)
_hg_paths
_hg_repos
Sean Farley
bash_completion: fix issue with subdirectories not being completed...
r20126 _hg_fix_wordlist
Sean Farley
bash_completion: untabify
r20123 return
;;
--cwd)
# Stick with default bash completion
Sean Farley
bash_completion: fix issue with subdirectories not being completed...
r20126 _hg_fix_wordlist
Sean Farley
bash_completion: untabify
r20123 return
;;
av6
bash_completion: complete arguments for --color and --pager
r39436 --color)
local choices='true false yes no always auto never debug'
COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$choices' -- "$cur"))
_hg_fix_wordlist
return
;;
--pager)
local choices='true false yes no always auto never'
COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$choices' -- "$cur"))
_hg_fix_wordlist
return
;;
Martin Geisler
setup: backout 68964567e406...
r10028 esac
if [ -z "$cmd" ] || [ $COMP_CWORD -eq $i ]; then
Sean Farley
bash_completion: untabify
r20123 _hg_commands
Sean Farley
bash_completion: fix issue with subdirectories not being completed...
r20126 _hg_fix_wordlist
Sean Farley
bash_completion: untabify
r20123 return
Martin Geisler
setup: backout 68964567e406...
r10028 fi
# try to generate completion candidates for whatever command the user typed
local help
if _hg_command_specific; then
Sean Farley
bash_completion: fix issue with subdirectories not being completed...
r20126 _hg_fix_wordlist
Sean Farley
bash_completion: untabify
r20123 return
Martin Geisler
setup: backout 68964567e406...
r10028 fi
# canonicalize the command name and try again
Brodie Rao
bash/zsh completion: use HGPLAIN when invoking hg (issue2297)
r11646 help=$(_hg_cmd help "$cmd")
Martin Geisler
setup: backout 68964567e406...
r10028 if [ $? -ne 0 ]; then
Sean Farley
bash_completion: untabify
r20123 # Probably either the command doesn't exist or it's ambiguous
return
Martin Geisler
setup: backout 68964567e406...
r10028 fi
cmd=${help#hg }
cmd=${cmd%%[$' \n']*}
canonical=1
_hg_command_specific
Sean Farley
bash_completion: fix issue with subdirectories not being completed...
r20126 _hg_fix_wordlist
Martin Geisler
setup: backout 68964567e406...
r10028 }
_hg_command_specific()
{
if [ "$(type -t "_hg_cmd_$cmd")" = function ]; then
Sean Farley
bash_completion: untabify
r20123 "_hg_cmd_$cmd"
return 0
Martin Geisler
setup: backout 68964567e406...
r10028 fi
Sean Farley
bash_completion: change --rev if-else block into a case...
r20133 if [ "$cmd" != status ]; then
case "$prev" in
-r|--rev)
if [[ $canonical = 1 || status != "$cmd"* ]]; then
_hg_labels
return 0
fi
return 1
;;
Sean Farley
bash_completion: add global support for -B|--bookmark...
r20134 -B|--bookmark)
if [[ $canonical = 1 || status != "$cmd"* ]]; then
_hg_bookmarks
return 0
fi
return 1
;;
Sean Farley
bash_completion: add global support for -b|--branch...
r20135 -b|--branch)
if [[ $canonical = 1 || status != "$cmd"* ]]; then
_hg_branches
return 0
fi
return 1
;;
Sean Farley
bash_completion: change --rev if-else block into a case...
r20133 esac
Martin Geisler
setup: backout 68964567e406...
r10028 fi
Sean Farley
bash_completion: expand aliased commands
r20124 local aliascmd=$(_hg_cmd showconfig alias.$cmd | awk '{print $1}')
[ -n "$aliascmd" ] && cmd=$aliascmd
Martin Geisler
setup: backout 68964567e406...
r10028 case "$cmd" in
Sean Farley
bash_completion: untabify
r20123 help)
_hg_commands
;;
export)
if _hg_ext_mq_patchlist qapplied && [ "${COMPREPLY[*]}" ]; then
return 0
fi
_hg_labels
;;
manifest|update|up|checkout|co)
_hg_labels
;;
pull|push|outgoing|incoming)
_hg_paths
_hg_repos
;;
paths)
_hg_paths
;;
add)
_hg_status "u"
;;
merge)
_hg_labels
;;
Martin von Zweigbergk
completion: add support for new "amend" command...
r35473 commit|ci|record|amend)
Sean Farley
bash_completion: untabify
r20123 _hg_status "mar"
;;
remove|rm)
_hg_debugpathcomplete -n
;;
forget)
_hg_debugpathcomplete -fa
;;
diff)
_hg_status "mar"
;;
revert)
Martin von Zweigbergk
completion: don't suggest clean files to revert...
r35472 _hg_status "mard"
Sean Farley
bash_completion: untabify
r20123 ;;
clone)
local count=$(_hg_count_non_option)
if [ $count = 1 ]; then
_hg_paths
fi
_hg_repos
;;
debugindex|debugindexdot)
COMPREPLY=(${COMPREPLY[@]:-} $(compgen -f -X "!*.i" -- "$cur"))
;;
debugdata)
COMPREPLY=(${COMPREPLY[@]:-} $(compgen -f -X "!*.d" -- "$cur"))
;;
*)
return 1
;;
Martin Geisler
setup: backout 68964567e406...
r10028 esac
return 0
}
Sean Farley
bash_completion: fix issue with subdirectories not being completed...
r20126 complete -o bashdefault -o default -o nospace -F _hg hg \
|| complete -o default -o nospace -F _hg hg
Martin Geisler
setup: backout 68964567e406...
r10028
# Completion for commands provided by extensions
# bookmarks
_hg_cmd_bookmarks()
{
Sean Farley
bash_completion: remove restriction on bookmark completion...
r20127 _hg_bookmarks
return
Martin Geisler
setup: backout 68964567e406...
r10028 }
# mq
_hg_ext_mq_patchlist()
{
local patches
Brodie Rao
bash/zsh completion: use HGPLAIN when invoking hg (issue2297)
r11646 patches=$(_hg_cmd $1)
Martin Geisler
setup: backout 68964567e406...
r10028 if [ $? -eq 0 ] && [ "$patches" ]; then
Sean Farley
bash_completion: untabify
r20123 COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$patches' -- "$cur"))
return 0
Martin Geisler
setup: backout 68964567e406...
r10028 fi
return 1
}
_hg_ext_mq_queues()
{
Brodie Rao
bash/zsh completion: use HGPLAIN when invoking hg (issue2297)
r11646 local root=$(_hg_cmd root)
Martin Geisler
setup: backout 68964567e406...
r10028 local n
for n in $(cd "$root"/.hg && compgen -d -- "$cur"); do
Sean Farley
bash_completion: untabify
r20123 # I think we're usually not interested in the regular "patches" queue
# so just filter it.
if [ "$n" != patches ] && [ -e "$root/.hg/$n/series" ]; then
COMPREPLY=(${COMPREPLY[@]:-} "$n")
fi
Martin Geisler
setup: backout 68964567e406...
r10028 done
}
_hg_cmd_qpop()
{
if [[ "$prev" = @(-n|--name) ]]; then
Sean Farley
bash_completion: untabify
r20123 _hg_ext_mq_queues
return
Martin Geisler
setup: backout 68964567e406...
r10028 fi
_hg_ext_mq_patchlist qapplied
}
_hg_cmd_qpush()
{
if [[ "$prev" = @(-n|--name) ]]; then
Sean Farley
bash_completion: untabify
r20123 _hg_ext_mq_queues
return
Martin Geisler
setup: backout 68964567e406...
r10028 fi
_hg_ext_mq_patchlist qunapplied
}
_hg_cmd_qgoto()
{
if [[ "$prev" = @(-n|--name) ]]; then
Sean Farley
bash_completion: untabify
r20123 _hg_ext_mq_queues
return
Martin Geisler
setup: backout 68964567e406...
r10028 fi
_hg_ext_mq_patchlist qseries
}
_hg_cmd_qdelete()
{
local qcmd=qunapplied
if [[ "$prev" = @(-r|--rev) ]]; then
Sean Farley
bash_completion: untabify
r20123 qcmd=qapplied
Martin Geisler
setup: backout 68964567e406...
r10028 fi
_hg_ext_mq_patchlist $qcmd
}
_hg_cmd_qfinish()
{
if [[ "$prev" = @(-a|--applied) ]]; then
Sean Farley
bash_completion: untabify
r20123 return
Martin Geisler
setup: backout 68964567e406...
r10028 fi
_hg_ext_mq_patchlist qapplied
}
_hg_cmd_qsave()
{
if [[ "$prev" = @(-n|--name) ]]; then
Sean Farley
bash_completion: untabify
r20123 _hg_ext_mq_queues
return
Martin Geisler
setup: backout 68964567e406...
r10028 fi
}
Kevin Bullock
bash_completion: add rebase rev completion
r17463 _hg_cmd_rebase() {
if [[ "$prev" = @(-s|--source|-d|--dest|-b|--base|-r|--rev) ]]; then
_hg_labels
return
fi
}
Martin Geisler
setup: backout 68964567e406...
r10028 _hg_cmd_strip()
{
Sean Farley
bash_completion: add -B|--bookmark support for strip
r20130 if [[ "$prev" = @(-B|--bookmark) ]]; then
_hg_bookmarks
return
fi
Kevin Bullock
bash_completion: complete bookmarks...
r13509 _hg_labels
Martin Geisler
setup: backout 68964567e406...
r10028 }
_hg_cmd_qcommit()
{
Brodie Rao
bash/zsh completion: use HGPLAIN when invoking hg (issue2297)
r11646 local root=$(_hg_cmd root)
Martin Geisler
setup: backout 68964567e406...
r10028 # this is run in a sub-shell, so we can't use _hg_status
Brodie Rao
bash/zsh completion: use HGPLAIN when invoking hg (issue2297)
r11646 local files=$(cd "$root/.hg/patches" && _hg_cmd status -nmar)
Martin Geisler
setup: backout 68964567e406...
r10028 COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$files' -- "$cur"))
}
_hg_cmd_qfold()
{
_hg_ext_mq_patchlist qunapplied
}
_hg_cmd_qrename()
{
_hg_ext_mq_patchlist qseries
}
_hg_cmd_qheader()
{
_hg_ext_mq_patchlist qseries
}
_hg_cmd_qclone()
{
local count=$(_hg_count_non_option)
if [ $count = 1 ]; then
Sean Farley
bash_completion: untabify
r20123 _hg_paths
Martin Geisler
setup: backout 68964567e406...
r10028 fi
_hg_repos
}
_hg_ext_mq_guards()
{
Brodie Rao
bash/zsh completion: use HGPLAIN when invoking hg (issue2297)
r11646 _hg_cmd qselect --series | sed -e 's/^.//'
Martin Geisler
setup: backout 68964567e406...
r10028 }
_hg_cmd_qselect()
{
local guards=$(_hg_ext_mq_guards)
COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$guards' -- "$cur"))
}
_hg_cmd_qguard()
{
local prefix=''
if [[ "$cur" == +* ]]; then
Sean Farley
bash_completion: untabify
r20123 prefix=+
Martin Geisler
setup: backout 68964567e406...
r10028 elif [[ "$cur" == -* ]]; then
Sean Farley
bash_completion: untabify
r20123 prefix=-
Martin Geisler
setup: backout 68964567e406...
r10028 fi
local ncur=${cur#[-+]}
if ! [ "$prefix" ]; then
Sean Farley
bash_completion: untabify
r20123 _hg_ext_mq_patchlist qseries
return
Martin Geisler
setup: backout 68964567e406...
r10028 fi
local guards=$(_hg_ext_mq_guards)
COMPREPLY=(${COMPREPLY[@]:-} $(compgen -P $prefix -W '$guards' -- "$ncur"))
}
_hg_opt_qguard()
{
local i
for ((i=cmd_index+1; i<=COMP_CWORD; i++)); do
Sean Farley
bash_completion: untabify
r20123 if [[ ${COMP_WORDS[i]} != -* ]]; then
if [[ ${COMP_WORDS[i-1]} != @($global_args) ]]; then
_hg_cmd_qguard
return 0
fi
elif [ "${COMP_WORDS[i]}" = -- ]; then
_hg_cmd_qguard
return 0
fi
Martin Geisler
setup: backout 68964567e406...
r10028 done
return 1
}
"Yann E. MORIN"
mq/qqueue: enable bash completion...
r11768 _hg_cmd_qqueue()
{
local q
local queues
"Yann E. MORIN"
mq/qqueue: update bash completion
r11968 local opts="--list --create --rename --delete --purge"
"Yann E. MORIN"
mq/qqueue: enable bash completion...
r11768
queues=$( _hg_cmd qqueue --quiet )
COMPREPLY=( $( compgen -W "${opts} ${queues}" "${cur}" ) )
}
Martin Geisler
setup: backout 68964567e406...
r10028
# hbisect
_hg_cmd_bisect()
{
local i subcmd
# find the sub-command
for ((i=cmd_index+1; i<=COMP_CWORD; i++)); do
Sean Farley
bash_completion: untabify
r20123 if [[ ${COMP_WORDS[i]} != -* ]]; then
if [[ ${COMP_WORDS[i-1]} != @($global_args) ]]; then
subcmd="${COMP_WORDS[i]}"
break
fi
fi
Martin Geisler
setup: backout 68964567e406...
r10028 done
if [ -z "$subcmd" ] || [ $COMP_CWORD -eq $i ] || [ "$subcmd" = help ]; then
Sean Farley
bash_completion: untabify
r20123 COMPREPLY=(${COMPREPLY[@]:-}
$(compgen -W 'bad good help init next reset' -- "$cur"))
return
Martin Geisler
setup: backout 68964567e406...
r10028 fi
case "$subcmd" in
Sean Farley
bash_completion: untabify
r20123 good|bad)
_hg_labels
;;
Martin Geisler
setup: backout 68964567e406...
r10028 esac
return
}
# patchbomb
_hg_cmd_email()
{
case "$prev" in
Sean Farley
bash_completion: untabify
r20123 -c|--cc|-t|--to|-f|--from|--bcc)
# we need an e-mail address. let the user provide a function
# to get them
if [ "$(type -t _hg_emails)" = function ]; then
local arg=to
if [[ "$prev" == @(-f|--from) ]]; then
arg=from
fi
local addresses=$(_hg_emails $arg)
COMPREPLY=(${COMPREPLY[@]:-}
$(compgen -W '$addresses' -- "$cur"))
fi
return
;;
-m|--mbox)
# fallback to standard filename completion
return
;;
-s|--subject)
# free form string
return
;;
Martin Geisler
setup: backout 68964567e406...
r10028 esac
Kevin Bullock
bash_completion: complete bookmarks...
r13509 _hg_labels
Martin Geisler
setup: backout 68964567e406...
r10028 return
}
# gpg
_hg_cmd_sign()
{
Kevin Bullock
bash_completion: complete bookmarks...
r13509 _hg_labels
Martin Geisler
setup: backout 68964567e406...
r10028 }
# transplant
_hg_cmd_transplant()
{
case "$prev" in
Sean Farley
bash_completion: untabify
r20123 -s|--source)
_hg_paths
_hg_repos
return
;;
--filter)
# standard filename completion
return
;;
Martin Geisler
setup: backout 68964567e406...
r10028 esac
# all other transplant options values and command parameters are revisions
Kevin Bullock
bash_completion: complete bookmarks...
r13509 _hg_labels
Martin Geisler
setup: backout 68964567e406...
r10028 return
}
# shelve
_hg_shelves()
{
Sean Farley
bash_completion: use correct command for listing shelves...
r20128 local shelves="$(_hg_cmd shelve -ql)"
Martin Geisler
setup: backout 68964567e406...
r10028 local IFS=$'\n'
COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$shelves' -- "$cur"))
}
_hg_cmd_shelve()
{
av6
bash_completion: add -p|--patch|--stat support for shelve
r26904 if [[ "$prev" = @(-d|--delete|-l|--list|-p|--patch|--stat) ]]; then
Sean Farley
bash_completion: add completion for deleting a shelve
r20129 _hg_shelves
else
_hg_status "mard"
fi
Martin Geisler
setup: backout 68964567e406...
r10028 }
_hg_cmd_unshelve()
{
_hg_shelves
}