##// END OF EJS Templates
exchangev2: fetch manifest revisions...
exchangev2: fetch manifest revisions Now that the server has support for retrieving manifest data, we can implement the client bits to call it. We teach the changeset fetching code to capture the manifest revisions that are encountered on incoming changesets. We then feed this into a new function which filters out known manifests and then batches up manifest data requests to the server. This is different from the previous wire protocol in a few notable ways. First, the client fetches manifest data separately and explicitly. Before, we'd ask the server for data pertaining to some changesets (via a "getbundle" command) and manifests (and files) would be sent automatically. Providing an API for looking up just manifest data separately gives clients much more flexibility for manifest management. For example, a client may choose to only fetch manifest data on demand instead of prefetching it (i.e. partial clone). Second, we send N commands to the server for manifest retrieval instead of 1. This property has a few nice side-effects. One is that the deterministic nature of the requests lends itself to server-side caching. For example, say the remote has 50,000 manifests. If the server is configured to cache responses, each time a new commit arrives, you will have a cache miss and need to regenerate all outgoing data. But if you makes N requests requesting 10,000 manifests each, a new commit will still yield cache hits on the initial, unchanged manifest batches/requests. A derived benefit from these properties is that resumable clone is conceptually simpler to implement. When making a monolithic request for all of the repository data, recovering from an interrupted clone is hard because the server was in the driver's seat and was maintaining state about all the data that needed transferred. With the client driving fetching, the client can persist the set of unfetched entities and retry/resume a fetch if something goes wrong. Or we can fetch all data N changesets at a time and slowly build up a repository. This approach is drastically easier to implement when we have server APIs exposing low-level repository primitives (such as manifests and files). We don't yet support tree manifests. But it should be possible to implement that with the existing wire protocol command. Differential Revision: https://phab.mercurial-scm.org/D4489

File last commit:

r34439:b90e8da1 default
r39674:d292328e default
Show More
dirs.c
316 lines | 6.9 KiB | text/x-c | CLexer
Yuya Nishihara
parsers: switch to policy importer...
r32372 /*
dirs.c - dynamic directory diddling for dirstates
Copyright 2013 Facebook
This software may be used and distributed according to the terms of
the GNU General Public License, incorporated herein by reference.
*/
#define PY_SSIZE_T_CLEAN
#include <Python.h>
Gregory Szorc
cext: reorder #include...
r34439
Yuya Nishihara
parsers: switch to policy importer...
r32372 #include "util.h"
#ifdef IS_PY3K
#define PYLONG_VALUE(o) ((PyLongObject *)o)->ob_digit[1]
#else
#define PYLONG_VALUE(o) PyInt_AS_LONG(o)
#endif
/*
* This is a multiset of directory names, built from the files that
* appear in a dirstate or manifest.
*
* A few implementation notes:
*
* We modify Python integers for refcounting, but those integers are
* never visible to Python code.
*
* We mutate strings in-place, but leave them immutable once they can
* be seen by Python code.
*/
typedef struct {
PyObject_HEAD
PyObject *dict;
} dirsObject;
static inline Py_ssize_t _finddir(const char *path, Py_ssize_t pos)
{
while (pos != -1) {
if (path[pos] == '/')
break;
pos -= 1;
}
return pos;
}
static int _addpath(PyObject *dirs, PyObject *path)
{
const char *cpath = PyBytes_AS_STRING(path);
Py_ssize_t pos = PyBytes_GET_SIZE(path);
PyObject *key = NULL;
int ret = -1;
/* This loop is super critical for performance. That's why we inline
* access to Python structs instead of going through a supported API.
* The implementation, therefore, is heavily dependent on CPython
* implementation details. We also commit violations of the Python
* "protocol" such as mutating immutable objects. But since we only
* mutate objects created in this function or in other well-defined
* locations, the references are known so these violations should go
* unnoticed. The code for adjusting the length of a PyBytesObject is
* essentially a minimal version of _PyBytes_Resize. */
while ((pos = _finddir(cpath, pos - 1)) != -1) {
PyObject *val;
/* It's likely that every prefix already has an entry
in our dict. Try to avoid allocating and
deallocating a string for each prefix we check. */
if (key != NULL)
((PyBytesObject *)key)->ob_shash = -1;
else {
/* Force Python to not reuse a small shared string. */
key = PyBytes_FromStringAndSize(cpath,
pos < 2 ? 2 : pos);
if (key == NULL)
goto bail;
}
/* Py_SIZE(o) refers to the ob_size member of the struct. Yes,
* assigning to what looks like a function seems wrong. */
Py_SIZE(key) = pos;
((PyBytesObject *)key)->ob_sval[pos] = '\0';
val = PyDict_GetItem(dirs, key);
if (val != NULL) {
PYLONG_VALUE(val) += 1;
break;
}
/* Force Python to not reuse a small shared int. */
#ifdef IS_PY3K
val = PyLong_FromLong(0x1eadbeef);
#else
val = PyInt_FromLong(0x1eadbeef);
#endif
if (val == NULL)
goto bail;
PYLONG_VALUE(val) = 1;
ret = PyDict_SetItem(dirs, key, val);
Py_DECREF(val);
if (ret == -1)
goto bail;
Py_CLEAR(key);
}
ret = 0;
bail:
Py_XDECREF(key);
return ret;
}
static int _delpath(PyObject *dirs, PyObject *path)
{
char *cpath = PyBytes_AS_STRING(path);
Py_ssize_t pos = PyBytes_GET_SIZE(path);
PyObject *key = NULL;
int ret = -1;
while ((pos = _finddir(cpath, pos - 1)) != -1) {
PyObject *val;
key = PyBytes_FromStringAndSize(cpath, pos);
if (key == NULL)
goto bail;
val = PyDict_GetItem(dirs, key);
if (val == NULL) {
PyErr_SetString(PyExc_ValueError,
"expected a value, found none");
goto bail;
}
if (--PYLONG_VALUE(val) <= 0) {
if (PyDict_DelItem(dirs, key) == -1)
goto bail;
} else
break;
Py_CLEAR(key);
}
ret = 0;
bail:
Py_XDECREF(key);
return ret;
}
static int dirs_fromdict(PyObject *dirs, PyObject *source, char skipchar)
{
PyObject *key, *value;
Py_ssize_t pos = 0;
while (PyDict_Next(source, &pos, &key, &value)) {
if (!PyBytes_Check(key)) {
PyErr_SetString(PyExc_TypeError, "expected string key");
return -1;
}
if (skipchar) {
if (!dirstate_tuple_check(value)) {
PyErr_SetString(PyExc_TypeError,
"expected a dirstate tuple");
return -1;
}
if (((dirstateTupleObject *)value)->state == skipchar)
continue;
}
if (_addpath(dirs, key) == -1)
return -1;
}
return 0;
}
static int dirs_fromiter(PyObject *dirs, PyObject *source)
{
PyObject *iter, *item = NULL;
int ret;
iter = PyObject_GetIter(source);
if (iter == NULL)
return -1;
while ((item = PyIter_Next(iter)) != NULL) {
if (!PyBytes_Check(item)) {
PyErr_SetString(PyExc_TypeError, "expected string");
break;
}
if (_addpath(dirs, item) == -1)
break;
Py_CLEAR(item);
}
ret = PyErr_Occurred() ? -1 : 0;
Py_DECREF(iter);
Py_XDECREF(item);
return ret;
}
/*
* Calculate a refcounted set of directory names for the files in a
* dirstate.
*/
static int dirs_init(dirsObject *self, PyObject *args)
{
PyObject *dirs = NULL, *source = NULL;
char skipchar = 0;
int ret = -1;
self->dict = NULL;
if (!PyArg_ParseTuple(args, "|Oc:__init__", &source, &skipchar))
return -1;
dirs = PyDict_New();
if (dirs == NULL)
return -1;
if (source == NULL)
ret = 0;
else if (PyDict_Check(source))
ret = dirs_fromdict(dirs, source, skipchar);
else if (skipchar)
PyErr_SetString(PyExc_ValueError,
"skip character is only supported "
"with a dict source");
else
ret = dirs_fromiter(dirs, source);
if (ret == -1)
Py_XDECREF(dirs);
else
self->dict = dirs;
return ret;
}
PyObject *dirs_addpath(dirsObject *self, PyObject *args)
{
PyObject *path;
if (!PyArg_ParseTuple(args, "O!:addpath", &PyBytes_Type, &path))
return NULL;
if (_addpath(self->dict, path) == -1)
return NULL;
Py_RETURN_NONE;
}
static PyObject *dirs_delpath(dirsObject *self, PyObject *args)
{
PyObject *path;
if (!PyArg_ParseTuple(args, "O!:delpath", &PyBytes_Type, &path))
return NULL;
if (_delpath(self->dict, path) == -1)
return NULL;
Py_RETURN_NONE;
}
static int dirs_contains(dirsObject *self, PyObject *value)
{
return PyBytes_Check(value) ? PyDict_Contains(self->dict, value) : 0;
}
static void dirs_dealloc(dirsObject *self)
{
Py_XDECREF(self->dict);
PyObject_Del(self);
}
static PyObject *dirs_iter(dirsObject *self)
{
return PyObject_GetIter(self->dict);
}
static PySequenceMethods dirs_sequence_methods;
static PyMethodDef dirs_methods[] = {
{"addpath", (PyCFunction)dirs_addpath, METH_VARARGS, "add a path"},
{"delpath", (PyCFunction)dirs_delpath, METH_VARARGS, "remove a path"},
{NULL} /* Sentinel */
};
static PyTypeObject dirsType = { PyVarObject_HEAD_INIT(NULL, 0) };
void dirs_module_init(PyObject *mod)
{
dirs_sequence_methods.sq_contains = (objobjproc)dirs_contains;
dirsType.tp_name = "parsers.dirs";
dirsType.tp_new = PyType_GenericNew;
dirsType.tp_basicsize = sizeof(dirsObject);
dirsType.tp_dealloc = (destructor)dirs_dealloc;
dirsType.tp_as_sequence = &dirs_sequence_methods;
dirsType.tp_flags = Py_TPFLAGS_DEFAULT;
dirsType.tp_doc = "dirs";
dirsType.tp_iter = (getiterfunc)dirs_iter;
dirsType.tp_methods = dirs_methods;
dirsType.tp_init = (initproc)dirs_init;
if (PyType_Ready(&dirsType) < 0)
return;
Py_INCREF(&dirsType);
PyModule_AddObject(mod, "dirs", (PyObject *)&dirsType);
}