##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

largefiles: access to specific fields only if largefiles enabled (issue4547)...
largefiles: access to specific fields only if largefiles enabled (issue4547) Even if largefiles extension is enabled in a repository, "repo" object, which isn't "largefiles.reposetup()"-ed, is passed to overridden functions in the cases below unexpectedly, because extensions are enabled for each repositories strictly. (1) clone without -U: (2) pull with -U: (3) pull with --rebase: combination of "enabled@src", "disabled@dst" and "not-required@src" cause this situation. largefiles requirement @src @dst @src result -------- -------- --------------- -------------------- enabled disabled not-required aborted unexpectedly required requirement error (intentional) -------- -------- --------------- -------------------- enabled enabled * success -------- -------- --------------- -------------------- disabled enabled * success (only for "pull") -------- -------- --------------- -------------------- disabled disabled not-required success required requirement error (intentional) -------- -------- --------------- -------------------- (4) update/revert with a subrepo disabling largefiles In these cases, overridden functions cause accessing to largefiles specific fields of not "largefiles.reposetup()"-ed "repo" object, and execution is aborted. - (1), (2), (4) cause accessing to "_lfstatuswriters" in "getstatuswriter()" invoked via "updatelfiles()" - (3) causes accessing to "_lfcommithooks" in "overriderebase()" For safe accessing to these fields, this patch examines whether passed "repo" object is "largefiles.reposetup()"-ed or not before accessing to them. This patch chooses examining existence of newly introduced "_largefilesenabled" instead of "_lfcommithooks" and "_lfstatuswriters" directly, because the former is better name for the generic "largefiles is enabled in this repo" mark than the latter. In the future, all other overridden functions should avoid largefiles specific processing for efficiency, and "_largefilesenabled" is better also for such purpose. BTW, "lfstatus" can't be used for such purpose, because some code paths set it forcibly regardless of existence of it in specified "repo" object.
Mads Kiilerich - - Load All Authors

File last commit:

r23749:a387b039 default
r24158:d414c28d stable
Show More
test-mq-guards.t
593 lines | 10.5 KiB | text/troff | Tads3Lexer
/ tests / test-mq-guards.t
History | Source | Raw |Copy content |Copy permalink
Nicolas Dumazet
tests: unify test-mq-guards
 r11896 $ echo "[extensions]" >> $HGRCPATH
$ echo "mq=" >> $HGRCPATH
$ hg init
$ hg qinit
$ echo x > x
$ hg ci -Ama
adding x
$ hg qnew a.patch
$ echo a > a
$ hg add a
$ hg qrefresh
$ hg qnew b.patch
$ echo b > b
$ hg add b
$ hg qrefresh
$ hg qnew c.patch
$ echo c > c
$ hg add c
$ hg qrefresh
$ hg qpop -a
popping c.patch
popping b.patch
popping a.patch
patch queue now empty
should fail
$ hg qguard does-not-exist.patch +bleh
abort: no patch named does-not-exist.patch
Matt Mackall
tests: add exit codes to unified tests
 r12316 [255]
Nicolas Dumazet
tests: unify test-mq-guards
 r11896
should fail
$ hg qguard +fail
abort: no patches applied
Matt Mackall
tests: add exit codes to unified tests
 r12316 [255]
Nicolas Dumazet
tests: unify test-mq-guards
 r11896
$ hg qpush
applying a.patch
now at: a.patch
should guard a.patch
$ hg qguard +a
should print +a
$ hg qguard
a.patch: +a
$ hg qpop
popping a.patch
patch queue now empty
should fail
$ hg qpush a.patch
Martin Geisler
mq: print "'foo' 'bar'", not "['foo', 'bar']" when showing guards...
 r14464 cannot push 'a.patch' - guarded by '+a'
Matt Mackall
tests: add exit codes to unified tests
 r12316 [1]
Nicolas Dumazet
tests: unify test-mq-guards
 r11896
$ hg qguard a.patch
a.patch: +a
should push b.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpop
popping b.patch
patch queue now empty
test selection of an empty guard
$ hg qselect ""
abort: guard cannot be an empty string
Matt Mackall
tests: add exit codes to unified tests
 r12316 [255]
Nicolas Dumazet
tests: unify test-mq-guards
 r11896 $ hg qselect a
number of unguarded, unapplied patches has changed from 2 to 3
should push a.patch
$ hg qpush
applying a.patch
now at: a.patch
$ hg qguard -- c.patch -a
should print -a
$ hg qguard c.patch
c.patch: -a
should skip c.patch
$ hg qpush -a
applying b.patch
skipping c.patch - guarded by '-a'
now at: b.patch
Patrick Mezard
mq: fix qnext when all remaining patches are guarded...
 r16063 $ hg qnext
all patches applied
[1]
Nicolas Dumazet
tests: unify test-mq-guards
 r11896
should display b.patch
$ hg qtop
b.patch
$ hg qguard -n c.patch
should push c.patch
$ hg qpush -a
applying c.patch
now at: c.patch
$ hg qpop -a
popping c.patch
popping b.patch
popping a.patch
patch queue now empty
$ hg qselect -n
guards deactivated
number of unguarded, unapplied patches has changed from 3 to 2
should push all
$ hg qpush -a
applying b.patch
applying c.patch
now at: c.patch
$ hg qpop -a
popping c.patch
popping b.patch
patch queue now empty
$ hg qguard a.patch +1
$ hg qguard b.patch +2
$ hg qselect 1
number of unguarded, unapplied patches has changed from 1 to 2
should push a.patch, not b.patch
$ hg qpush
applying a.patch
now at: a.patch
$ hg qpush
applying c.patch
now at: c.patch
$ hg qpop -a
popping c.patch
popping a.patch
patch queue now empty
$ hg qselect 2
should push b.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpush -a
applying c.patch
now at: c.patch
Patrick Mezard
mq: make qprev return the previous applied patch (issue3245)...
 r16064 $ hg qprev
b.patch
Nicolas Dumazet
tests: unify test-mq-guards
 r11896
Used to be an issue with holes in the patch sequence
So, put one hole on the base and ask for topmost patch.
$ hg qtop
c.patch
$ hg qpop -a
popping c.patch
popping b.patch
patch queue now empty
$ hg qselect 1 2
number of unguarded, unapplied patches has changed from 2 to 3
should push a.patch, b.patch
$ hg qpush
applying a.patch
now at: a.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpop -a
popping b.patch
popping a.patch
patch queue now empty
$ hg qguard -- a.patch +1 +2 -3
$ hg qselect 1 2 3
number of unguarded, unapplied patches has changed from 3 to 2
list patches and guards
$ hg qguard -l
a.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
have at least one patch applied to test coloring
$ hg qpush
applying b.patch
now at: b.patch
list patches and guards with color
$ hg --config extensions.color= qguard --config color.mode=ansi \
> -l --color=always
Mads Kiilerich
tests: use (esc) for all non-ASCII test output
 r12942 \x1b[0;30;1ma.patch\x1b[0m: \x1b[0;33m+1\x1b[0m \x1b[0;33m+2\x1b[0m \x1b[0;31m-3\x1b[0m (esc)
\x1b[0;34;1;4mb.patch\x1b[0m: \x1b[0;33m+2\x1b[0m (esc)
\x1b[0;30;1mc.patch\x1b[0m: \x1b[0;32munguarded\x1b[0m (esc)
Nicolas Dumazet
tests: unify test-mq-guards
 r11896
should pop b.patch
$ hg qpop
popping b.patch
patch queue now empty
list series
$ hg qseries -v
0 G a.patch
1 U b.patch
2 U c.patch
list guards
$ hg qselect
1
2
3
should push b.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpush -a
applying c.patch
now at: c.patch
FUJIWARA Katsunori
mq: use "mq.applied[i].name" instead of "mq.appliedname(i)" for safety...
 r22454 $ hg qselect -n --reapply -v
Nicolas Dumazet
tests: unify test-mq-guards
 r11896 guards deactivated
popping guarded patches
popping c.patch
popping b.patch
patch queue now empty
reapplying unguarded patches
FUJIWARA Katsunori
mq: use "mq.applied[i].name" instead of "mq.appliedname(i)" for safety...
 r22454 skipping a.patch - guarded by '+1' '+2'
skipping b.patch - guarded by '+2'
skipping a.patch - guarded by '+1' '+2'
skipping b.patch - guarded by '+2'
Nicolas Dumazet
tests: unify test-mq-guards
 r11896 applying c.patch
FUJIWARA Katsunori
mq: use "mq.applied[i].name" instead of "mq.appliedname(i)" for safety...
 r22454 patching file c
adding c
Mads Kiilerich
localrepo: show headline notes in commitctx before showing filenames...
 r23749 committing files:
FUJIWARA Katsunori
mq: use "mq.applied[i].name" instead of "mq.appliedname(i)" for safety...
 r22454 c
Mads Kiilerich
localrepo: show headline notes in commitctx before showing filenames...
 r23749 committing manifest
committing changelog
Nicolas Dumazet
tests: unify test-mq-guards
 r11896 now at: c.patch
guards in series file: +1 +2 -3
$ hg qselect -s
+1
+2
-3
should show c.patch
$ hg qapplied
c.patch
$ hg qrename a.patch new.patch
should show :
new.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
$ hg qguard -l
new.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
$ hg qnew d.patch
$ hg qpop
popping d.patch
now at: c.patch
should show new.patch and b.patch as Guarded, c.patch as Applied
and d.patch as Unapplied
$ hg qseries -v
0 G new.patch
1 G b.patch
2 A c.patch
3 U d.patch
qseries again, but with color
Danek Duvall
color: add support for terminfo-based attributes and color...
 r13987 $ hg --config extensions.color= --config color.mode=ansi qseries -v --color=always
Mads Kiilerich
tests: use (esc) for all non-ASCII test output
 r12942 0 G \x1b[0;30;1mnew.patch\x1b[0m (esc)
1 G \x1b[0;30;1mb.patch\x1b[0m (esc)
2 A \x1b[0;34;1;4mc.patch\x1b[0m (esc)
3 U \x1b[0;30;1md.patch\x1b[0m (esc)
Nicolas Dumazet
tests: unify test-mq-guards
 r11896
$ hg qguard d.patch +2
new.patch, b.patch: Guarded. c.patch: Applied. d.patch: Guarded.
$ hg qseries -v
0 G new.patch
1 G b.patch
2 A c.patch
3 G d.patch
$ qappunappv()
> {
> for command in qapplied "qapplied -v" qunapplied "qunapplied -v"; do
> echo % hg $command
> hg $command
> done
> }
$ hg qpop -a
popping c.patch
patch queue now empty
$ hg qguard -l
new.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
d.patch: +2
$ qappunappv
% hg qapplied
% hg qapplied -v
% hg qunapplied
c.patch
% hg qunapplied -v
0 G new.patch
1 G b.patch
2 U c.patch
3 G d.patch
$ hg qselect 1
number of unguarded, unapplied patches has changed from 1 to 2
$ qappunappv
% hg qapplied
% hg qapplied -v
% hg qunapplied
new.patch
c.patch
% hg qunapplied -v
0 U new.patch
1 G b.patch
2 U c.patch
3 G d.patch
$ hg qpush -a
applying new.patch
Martin Geisler
mq: print "'foo' 'bar'", not "['foo', 'bar']" when showing guards...
 r14464 skipping b.patch - guarded by '+2'
Nicolas Dumazet
tests: unify test-mq-guards
 r11896 applying c.patch
Martin Geisler
mq: print "'foo' 'bar'", not "['foo', 'bar']" when showing guards...
 r14464 skipping d.patch - guarded by '+2'
Nicolas Dumazet
tests: unify test-mq-guards
 r11896 now at: c.patch
$ qappunappv
% hg qapplied
new.patch
c.patch
% hg qapplied -v
0 A new.patch
1 G b.patch
2 A c.patch
% hg qunapplied
% hg qunapplied -v
3 G d.patch
$ hg qselect 2
number of unguarded, unapplied patches has changed from 0 to 1
$ qappunappv
% hg qapplied
new.patch
c.patch
% hg qapplied -v
0 A new.patch
1 U b.patch
2 A c.patch
% hg qunapplied
d.patch
% hg qunapplied -v
3 U d.patch
$ for patch in `hg qseries`; do
> echo % hg qapplied $patch
> hg qapplied $patch
> echo % hg qunapplied $patch
> hg qunapplied $patch
> done
% hg qapplied new.patch
new.patch
% hg qunapplied new.patch
b.patch
d.patch
% hg qapplied b.patch
new.patch
% hg qunapplied b.patch
d.patch
% hg qapplied c.patch
new.patch
c.patch
% hg qunapplied c.patch
d.patch
% hg qapplied d.patch
new.patch
c.patch
% hg qunapplied d.patch
hg qseries -m: only b.patch should be shown
the guards file was not ignored in the past
$ hg qdelete -k b.patch
$ hg qseries -m
b.patch
hg qseries -m with color
Danek Duvall
color: add support for terminfo-based attributes and color...
 r13987 $ hg --config extensions.color= --config color.mode=ansi qseries -m --color=always
Mads Kiilerich
tests: use (esc) for all non-ASCII test output
 r12942 \x1b[0;31;1mb.patch\x1b[0m (esc)
Mads Kiilerich
tests: exercise some corner cases for mq guard selection and --reapply
 r15245
Mads Kiilerich
spelling: fixes from spell checker
 r21024 excercise corner cases in "qselect --reapply"
Mads Kiilerich
tests: exercise some corner cases for mq guard selection and --reapply
 r15245
$ hg qpop -a
popping c.patch
popping new.patch
patch queue now empty
$ hg qguard -- new.patch -not-new
$ hg qguard -- c.patch -not-c
$ hg qguard -- d.patch -not-d
$ hg qpush -a
applying new.patch
applying c.patch
applying d.patch
patch d.patch is empty
now at: d.patch
$ hg qguard -l
new.patch: -not-new
c.patch: -not-c
d.patch: -not-d
$ hg qselect --reapply not-d
popping guarded patches
popping d.patch
now at: c.patch
reapplying unguarded patches
cannot push 'd.patch' - guarded by '-not-d'
$ hg qser -v
0 A new.patch
1 A c.patch
2 G d.patch
$ hg qselect --reapply -n
guards deactivated
$ hg qpush
applying d.patch
patch d.patch is empty
now at: d.patch
$ hg qser -v
0 A new.patch
1 A c.patch
2 A d.patch
$ hg qselect --reapply not-c
popping guarded patches
popping d.patch
Mads Kiilerich
mq: fix corner cases for handling of patch 0 in qselect...
 r15256 popping c.patch
now at: new.patch
Mads Kiilerich
tests: exercise some corner cases for mq guard selection and --reapply
 r15245 reapplying unguarded patches
applying d.patch
patch d.patch is empty
now at: d.patch
$ hg qser -v
0 A new.patch
Mads Kiilerich
mq: fix corner cases for handling of patch 0 in qselect...
 r15256 1 G c.patch
Mads Kiilerich
tests: exercise some corner cases for mq guard selection and --reapply
 r15245 2 A d.patch
$ hg qselect --reapply not-new
popping guarded patches
popping d.patch
popping new.patch
patch queue now empty
reapplying unguarded patches
applying c.patch
applying d.patch
patch d.patch is empty
now at: d.patch
$ hg qser -v
0 G new.patch
1 A c.patch
2 A d.patch
FUJIWARA Katsunori
mq: report correct numbers for changing "number of guarded, applied patches"...
 r22453
test that qselect shows "number of guarded, applied patches" correctly
$ hg qimport -q -e b.patch
adding b.patch to series file
$ hg qguard -- b.patch -not-b
$ hg qpop -a -q
patch queue now empty
$ hg qunapplied -v
0 G new.patch
1 U c.patch
2 U d.patch
3 U b.patch
$ hg qselect not-new not-c
number of unguarded, unapplied patches has changed from 3 to 2
$ hg qpush -q -a
patch d.patch is empty
now at: b.patch
$ hg qapplied -v
0 G new.patch
1 G c.patch
2 A d.patch
3 A b.patch
$ hg qselect --none
guards deactivated
$ hg qselect not-new not-c not-d
number of guarded, applied patches has changed from 0 to 1
FUJIWARA Katsunori
mq: pop correct patches when changing pushable-ness of already applied ones...
 r22455
test that "qselect --reapply" reapplies patches successfully when the
already applied patch becomes unguarded and it follows the already
guarded (= not yet applied) one.
$ hg qpop -q -a
patch queue now empty
$ hg qselect not-new not-c
number of unguarded, unapplied patches has changed from 1 to 2
$ hg qpush -q -a
patch d.patch is empty
now at: b.patch
$ hg qapplied -v
0 G new.patch
1 G c.patch
2 A d.patch
3 A b.patch
$ hg qselect -q --reapply not-c not-b
now at: d.patch
cannot push 'b.patch' - guarded by '-not-b'
$ hg qseries -v
0 U new.patch
1 G c.patch
2 A d.patch
3 G b.patch
FUJIWARA Katsunori
mq: examine "pushable" of already applied patch correctly...
 r22456
test that "qselect --reapply" checks applied patches correctly when no
Mads Kiilerich
spelling: fixes from proofreading of spell checker issues
 r23139 applied patches becomes guarded but some of unapplied ones become
FUJIWARA Katsunori
mq: examine "pushable" of already applied patch correctly...
 r22456 unguarded.
$ hg qpop -q -a
patch queue now empty
$ hg qselect not-new not-c not-d
number of unguarded, unapplied patches has changed from 2 to 1
$ hg qpush -q -a
now at: b.patch
$ hg qapplied -v
0 G new.patch
1 G c.patch
2 G d.patch
3 A b.patch
$ hg qselect -q --reapply not-new not-c
$ hg qseries -v
0 G new.patch
1 G c.patch
2 U d.patch
3 A b.patch