##// END OF EJS Templates
discovery: slowly increase sampling size...
discovery: slowly increase sampling size Some pathological discovery runs can requires many roundtrip. When this happens things can get very slow. To make the algorithm more resilience again such pathological case. We slowly increase the sample size with each roundtrip (+5%). This will have a negligible impact on "normal" discovery with few roundtrips, but a large positive impact of case with many roundtrips. Asking more question per roundtrip helps to reduce the undecided set faster. Instead of reducing the undecided set a linear speed (in the worst case), we reduce it as a guaranteed (small) exponential rate. The data below show this slow ramp up in sample size: round trip | 1 | 5 | 10 | 20 | 50 | 100 | 130 | sample size | 200 | 254 | 321 | 517 | 2 199 | 25 123 | 108 549 | covered nodes | 200 | 1 357 | 2 821 | 7 031 | 42 658 | 524 530 | 2 276 755 | To be a bit more concrete, lets take a very pathological case as an example. We are doing discovery from a copy of Mozilla-try to a more recent version of mozilla-unified. Mozilla-unified heads are unknown to the mozilla-try repo and there are over 1 million "missing" changesets. (the discovery is "local" to avoid network interference) Without this change, the discovery: - last 1858 seconds (31 minutes), - does 1700 round trip, - asking about 340 000 nodes. With this change, the discovery: - last 218 seconds (3 minutes, 38 seconds a -88% improvement), - does 94 round trip (-94%), - asking about 344 211 nodes (+1%). Of course, this is an extreme case (and 3 minutes is still slow). However this give a good example of how this sample size increase act as a safety net catching any bad situations. We could image a steeper increase than 5%. For example 10% would give the following number: round trip | 1 | 5 | 10 | 20 | 50 | 75 | 100 | sample size | 200 | 321 | 514 | 1 326 | 23 060 | 249 812 | 2 706 594 | covered nodes | 200 | 1 541 | 3 690 | 12 671 | 251 871 | 2 746 254 | 29 770 966 | In parallel, it is useful to understand these pathological cases and improve them. However the current change provides a general purpose safety net to smooth the impact of pathological cases. To avoid issue with older http server, the increase in sample size only occurs if the protocol has not limit on command argument size.

File last commit:

r40801:7e6834ad default
r42546:dbd0fcca default
Show More
manifest.c
987 lines | 25.6 KiB | text/x-c | CLexer
Yuya Nishihara
parsers: switch to policy importer...
r32372 /*
* manifest.c - manifest type that does on-demand parsing.
*
* Copyright 2015, Google Inc.
*
* This software may be used and distributed according to the terms of
* the GNU General Public License, incorporated herein by reference.
*/
#include <Python.h>
#include <assert.h>
Gregory Szorc
cext: reorder #include...
r34439 #include <stdlib.h>
Yuya Nishihara
parsers: switch to policy importer...
r32372 #include <string.h>
Yuya Nishihara
cext: factor out header for charencode.c...
r33753 #include "charencode.h"
Yuya Nishihara
parsers: switch to policy importer...
r32372 #include "util.h"
#define DEFAULT_LINES 100000
typedef struct {
char *start;
Py_ssize_t len; /* length of line including terminal newline */
char hash_suffix;
bool from_malloc;
bool deleted;
} line;
typedef struct {
PyObject_HEAD
PyObject *pydata;
line *lines;
int numlines; /* number of line entries */
int livelines; /* number of non-deleted lines */
int maxlines; /* allocated number of lines */
bool dirty;
} lazymanifest;
#define MANIFEST_OOM -1
#define MANIFEST_NOT_SORTED -2
#define MANIFEST_MALFORMED -3
Augie Fackler
manifest: make sure there's a filename before bothering to look for newline...
r40635 #define MANIFEST_BOGUS_FILENAME -4
Augie Fackler
manifest: also reject obviously-too-short lines when parsing lines...
r40636 #define MANIFEST_TOO_SHORT_LINE -5
Yuya Nishihara
parsers: switch to policy importer...
r32372
/* get the length of the path for a line */
Gregory Szorc
cext: wrap before brace for functions...
r34441 static size_t pathlen(line *l)
{
Yuya Nishihara
manifest: rewrite pathlen() to not cross entry boundary...
r39975 const char *end = memchr(l->start, '\0', l->len);
return (end) ? (size_t)(end - l->start) : l->len;
Yuya Nishihara
parsers: switch to policy importer...
r32372 }
/* get the node value of a single line */
Gregory Szorc
cext: wrap before brace for functions...
r34441 static PyObject *nodeof(line *l)
{
Yuya Nishihara
parsers: switch to policy importer...
r32372 char *s = l->start;
ssize_t llen = pathlen(l);
Yuya Nishihara
manifest: fix out-of-bounds read of corrupted manifest entry...
r39976 PyObject *hash;
if (llen + 1 + 40 + 1 > l->len) { /* path '\0' hash '\n' */
PyErr_SetString(PyExc_ValueError, "manifest line too short");
return NULL;
}
hash = unhexlify(s + llen + 1, 40);
Yuya Nishihara
parsers: switch to policy importer...
r32372 if (!hash) {
return NULL;
}
if (l->hash_suffix != '\0') {
char newhash[21];
memcpy(newhash, PyBytes_AsString(hash), 20);
Py_DECREF(hash);
newhash[20] = l->hash_suffix;
hash = PyBytes_FromStringAndSize(newhash, 21);
}
return hash;
}
/* get the node hash and flags of a line as a tuple */
static PyObject *hashflags(line *l)
{
char *s = l->start;
size_t plen = pathlen(l);
PyObject *hash = nodeof(l);
/* 40 for hash, 1 for null byte, 1 for newline */
size_t hplen = plen + 42;
Py_ssize_t flen = l->len - hplen;
PyObject *flags;
PyObject *tup;
if (!hash)
return NULL;
flags = PyBytes_FromStringAndSize(s + hplen - 1, flen);
if (!flags) {
Py_DECREF(hash);
return NULL;
}
tup = PyTuple_Pack(2, hash, flags);
Py_DECREF(flags);
Py_DECREF(hash);
return tup;
}
/* if we're about to run out of space in the line index, add more */
static bool realloc_if_full(lazymanifest *self)
{
if (self->numlines == self->maxlines) {
self->maxlines *= 2;
self->lines = realloc(self->lines, self->maxlines * sizeof(line));
}
return !!self->lines;
}
/*
* Find the line boundaries in the manifest that 'data' points to and store
* information about each line in 'self'.
*/
static int find_lines(lazymanifest *self, char *data, Py_ssize_t len)
{
char *prev = NULL;
while (len > 0) {
line *l;
Augie Fackler
manifest: make sure there's a filename before bothering to look for newline...
r40635 char *next;
if (*data == '\0') {
/* It's implausible there's no filename, don't
* even bother looking for the newline. */
return MANIFEST_BOGUS_FILENAME;
}
next = memchr(data, '\n', len);
Yuya Nishihara
parsers: switch to policy importer...
r32372 if (!next) {
return MANIFEST_MALFORMED;
}
Augie Fackler
manifest: reject lines shorter than 42 bytes, not 22...
r40801 if ((next - data) < 42) {
/* We should have at least 42 bytes in a line:
Augie Fackler
manifest: also reject obviously-too-short lines when parsing lines...
r40636 1 byte filename
1 NUL
Augie Fackler
manifest: reject lines shorter than 42 bytes, not 22...
r40801 40 bytes of hash
Augie Fackler
manifest: also reject obviously-too-short lines when parsing lines...
r40636 so we can give up here.
*/
return MANIFEST_TOO_SHORT_LINE;
}
Yuya Nishihara
parsers: switch to policy importer...
r32372 next++; /* advance past newline */
if (prev && strcmp(prev, data) > -1) {
/* This data isn't sorted, so we have to abort. */
return MANIFEST_NOT_SORTED;
}
Augie Fackler
manifest: perform cheap checks before potentially allocating memory...
r40637 if (!realloc_if_full(self)) {
return MANIFEST_OOM; /* no memory */
}
Yuya Nishihara
parsers: switch to policy importer...
r32372 l = self->lines + ((self->numlines)++);
l->start = data;
l->len = next - data;
l->hash_suffix = '\0';
l->from_malloc = false;
l->deleted = false;
len = len - l->len;
prev = data;
data = next;
}
self->livelines = self->numlines;
return 0;
}
Yuya Nishihara
manifest: fix possible SEGV caused by uninitialized lazymanifest fields...
r38346 static void lazymanifest_init_early(lazymanifest *self)
{
self->pydata = NULL;
self->lines = NULL;
self->numlines = 0;
self->maxlines = 0;
}
Yuya Nishihara
parsers: switch to policy importer...
r32372 static int lazymanifest_init(lazymanifest *self, PyObject *args)
{
char *data;
Py_ssize_t len;
int err, ret;
PyObject *pydata;
Yuya Nishihara
manifest: fix possible SEGV caused by uninitialized lazymanifest fields...
r38346
lazymanifest_init_early(self);
Yuya Nishihara
parsers: switch to policy importer...
r32372 if (!PyArg_ParseTuple(args, "S", &pydata)) {
return -1;
}
err = PyBytes_AsStringAndSize(pydata, &data, &len);
self->dirty = false;
if (err == -1)
return -1;
self->pydata = pydata;
Py_INCREF(self->pydata);
Py_BEGIN_ALLOW_THREADS
self->lines = malloc(DEFAULT_LINES * sizeof(line));
self->maxlines = DEFAULT_LINES;
self->numlines = 0;
if (!self->lines)
ret = MANIFEST_OOM;
else
ret = find_lines(self, data, len);
Py_END_ALLOW_THREADS
switch (ret) {
case 0:
break;
case MANIFEST_OOM:
PyErr_NoMemory();
break;
case MANIFEST_NOT_SORTED:
PyErr_Format(PyExc_ValueError,
"Manifest lines not in sorted order.");
break;
case MANIFEST_MALFORMED:
PyErr_Format(PyExc_ValueError,
"Manifest did not end in a newline.");
break;
Augie Fackler
manifest: make sure there's a filename before bothering to look for newline...
r40635 case MANIFEST_BOGUS_FILENAME:
PyErr_Format(
PyExc_ValueError,
"Manifest had an entry with a zero-length filename.");
break;
Augie Fackler
manifest: also reject obviously-too-short lines when parsing lines...
r40636 case MANIFEST_TOO_SHORT_LINE:
PyErr_Format(
PyExc_ValueError,
"Manifest had implausibly-short line.");
break;
Yuya Nishihara
parsers: switch to policy importer...
r32372 default:
PyErr_Format(PyExc_ValueError,
"Unknown problem parsing manifest.");
}
return ret == 0 ? 0 : -1;
}
static void lazymanifest_dealloc(lazymanifest *self)
{
/* free any extra lines we had to allocate */
int i;
Josef 'Jeff' Sipek
lazymanifest: don't crash when out of memory (issue5916)...
r38321 for (i = 0; self->lines && (i < self->numlines); i++) {
Yuya Nishihara
parsers: switch to policy importer...
r32372 if (self->lines[i].from_malloc) {
free(self->lines[i].start);
}
}
Josef 'Jeff' Sipek
cext: stop worrying and love the free(NULL)...
r38320 free(self->lines);
self->lines = NULL;
Yuya Nishihara
parsers: switch to policy importer...
r32372 if (self->pydata) {
Py_DECREF(self->pydata);
self->pydata = NULL;
}
PyObject_Del(self);
}
/* iteration support */
typedef struct {
PyObject_HEAD lazymanifest *m;
Py_ssize_t pos;
} lmIter;
static void lmiter_dealloc(PyObject *o)
{
lmIter *self = (lmIter *)o;
Py_DECREF(self->m);
PyObject_Del(self);
}
static line *lmiter_nextline(lmIter *self)
{
do {
self->pos++;
if (self->pos >= self->m->numlines) {
return NULL;
}
/* skip over deleted manifest entries */
} while (self->m->lines[self->pos].deleted);
return self->m->lines + self->pos;
}
static PyObject *lmiter_iterentriesnext(PyObject *o)
{
size_t pl;
line *l;
Py_ssize_t consumed;
PyObject *ret = NULL, *path = NULL, *hash = NULL, *flags = NULL;
l = lmiter_nextline((lmIter *)o);
if (!l) {
goto done;
}
pl = pathlen(l);
path = PyBytes_FromStringAndSize(l->start, pl);
hash = nodeof(l);
Yuya Nishihara
manifest: fix out-of-bounds read of corrupted manifest entry...
r39976 if (!path || !hash) {
goto done;
}
Yuya Nishihara
parsers: switch to policy importer...
r32372 consumed = pl + 41;
flags = PyBytes_FromStringAndSize(l->start + consumed,
l->len - consumed - 1);
Yuya Nishihara
manifest: fix out-of-bounds read of corrupted manifest entry...
r39976 if (!flags) {
Yuya Nishihara
parsers: switch to policy importer...
r32372 goto done;
}
ret = PyTuple_Pack(3, path, hash, flags);
done:
Py_XDECREF(path);
Py_XDECREF(hash);
Py_XDECREF(flags);
return ret;
}
#ifdef IS_PY3K
#define LAZYMANIFESTENTRIESITERATOR_TPFLAGS Py_TPFLAGS_DEFAULT
#else
#define LAZYMANIFESTENTRIESITERATOR_TPFLAGS Py_TPFLAGS_DEFAULT \
| Py_TPFLAGS_HAVE_ITER
#endif
static PyTypeObject lazymanifestEntriesIterator = {
Augie Fackler
cext: add /* header */ comment to all PyVarObject_HEAD_INIT() calls...
r34862 PyVarObject_HEAD_INIT(NULL, 0) /* header */
Yuya Nishihara
parsers: switch to policy importer...
r32372 "parsers.lazymanifest.entriesiterator", /*tp_name */
sizeof(lmIter), /*tp_basicsize */
0, /*tp_itemsize */
lmiter_dealloc, /*tp_dealloc */
0, /*tp_print */
0, /*tp_getattr */
0, /*tp_setattr */
0, /*tp_compare */
0, /*tp_repr */
0, /*tp_as_number */
0, /*tp_as_sequence */
0, /*tp_as_mapping */
0, /*tp_hash */
0, /*tp_call */
0, /*tp_str */
0, /*tp_getattro */
0, /*tp_setattro */
0, /*tp_as_buffer */
LAZYMANIFESTENTRIESITERATOR_TPFLAGS, /* tp_flags */
"Iterator for 3-tuples in a lazymanifest.", /* tp_doc */
0, /* tp_traverse */
0, /* tp_clear */
0, /* tp_richcompare */
0, /* tp_weaklistoffset */
PyObject_SelfIter, /* tp_iter: __iter__() method */
lmiter_iterentriesnext, /* tp_iternext: next() method */
};
static PyObject *lmiter_iterkeysnext(PyObject *o)
{
size_t pl;
line *l = lmiter_nextline((lmIter *)o);
if (!l) {
return NULL;
}
pl = pathlen(l);
return PyBytes_FromStringAndSize(l->start, pl);
}
#ifdef IS_PY3K
#define LAZYMANIFESTKEYSITERATOR_TPFLAGS Py_TPFLAGS_DEFAULT
#else
#define LAZYMANIFESTKEYSITERATOR_TPFLAGS Py_TPFLAGS_DEFAULT \
| Py_TPFLAGS_HAVE_ITER
#endif
static PyTypeObject lazymanifestKeysIterator = {
Augie Fackler
cext: add /* header */ comment to all PyVarObject_HEAD_INIT() calls...
r34862 PyVarObject_HEAD_INIT(NULL, 0) /* header */
Yuya Nishihara
parsers: switch to policy importer...
r32372 "parsers.lazymanifest.keysiterator", /*tp_name */
sizeof(lmIter), /*tp_basicsize */
0, /*tp_itemsize */
lmiter_dealloc, /*tp_dealloc */
0, /*tp_print */
0, /*tp_getattr */
0, /*tp_setattr */
0, /*tp_compare */
0, /*tp_repr */
0, /*tp_as_number */
0, /*tp_as_sequence */
0, /*tp_as_mapping */
0, /*tp_hash */
0, /*tp_call */
0, /*tp_str */
0, /*tp_getattro */
0, /*tp_setattro */
0, /*tp_as_buffer */
LAZYMANIFESTKEYSITERATOR_TPFLAGS, /* tp_flags */
"Keys iterator for a lazymanifest.", /* tp_doc */
0, /* tp_traverse */
0, /* tp_clear */
0, /* tp_richcompare */
0, /* tp_weaklistoffset */
PyObject_SelfIter, /* tp_iter: __iter__() method */
lmiter_iterkeysnext, /* tp_iternext: next() method */
};
static lazymanifest *lazymanifest_copy(lazymanifest *self);
static PyObject *lazymanifest_getentriesiter(lazymanifest *self)
{
lmIter *i = NULL;
lazymanifest *t = lazymanifest_copy(self);
if (!t) {
PyErr_NoMemory();
return NULL;
}
i = PyObject_New(lmIter, &lazymanifestEntriesIterator);
if (i) {
i->m = t;
i->pos = -1;
} else {
Py_DECREF(t);
PyErr_NoMemory();
}
return (PyObject *)i;
}
static PyObject *lazymanifest_getkeysiter(lazymanifest *self)
{
lmIter *i = NULL;
lazymanifest *t = lazymanifest_copy(self);
if (!t) {
PyErr_NoMemory();
return NULL;
}
i = PyObject_New(lmIter, &lazymanifestKeysIterator);
if (i) {
i->m = t;
i->pos = -1;
} else {
Py_DECREF(t);
PyErr_NoMemory();
}
return (PyObject *)i;
}
/* __getitem__ and __setitem__ support */
static Py_ssize_t lazymanifest_size(lazymanifest *self)
{
return self->livelines;
}
static int linecmp(const void *left, const void *right)
{
return strcmp(((const line *)left)->start,
((const line *)right)->start);
}
static PyObject *lazymanifest_getitem(lazymanifest *self, PyObject *key)
{
line needle;
line *hit;
if (!PyBytes_Check(key)) {
PyErr_Format(PyExc_TypeError,
"getitem: manifest keys must be a string.");
return NULL;
}
needle.start = PyBytes_AsString(key);
hit = bsearch(&needle, self->lines, self->numlines, sizeof(line),
&linecmp);
if (!hit || hit->deleted) {
PyErr_Format(PyExc_KeyError, "No such manifest entry.");
return NULL;
}
return hashflags(hit);
}
static int lazymanifest_delitem(lazymanifest *self, PyObject *key)
{
line needle;
line *hit;
if (!PyBytes_Check(key)) {
PyErr_Format(PyExc_TypeError,
"delitem: manifest keys must be a string.");
return -1;
}
needle.start = PyBytes_AsString(key);
hit = bsearch(&needle, self->lines, self->numlines, sizeof(line),
&linecmp);
if (!hit || hit->deleted) {
PyErr_Format(PyExc_KeyError,
"Tried to delete nonexistent manifest entry.");
return -1;
}
self->dirty = true;
hit->deleted = true;
self->livelines--;
return 0;
}
/* Do a binary search for the insertion point for new, creating the
* new entry if needed. */
Gregory Szorc
cext: wrap before brace for functions...
r34441 static int internalsetitem(lazymanifest *self, line *new)
{
Yuya Nishihara
parsers: switch to policy importer...
r32372 int start = 0, end = self->numlines;
while (start < end) {
int pos = start + (end - start) / 2;
int c = linecmp(new, self->lines + pos);
if (c < 0)
end = pos;
else if (c > 0)
start = pos + 1;
else {
if (self->lines[pos].deleted)
self->livelines++;
if (self->lines[pos].from_malloc)
free(self->lines[pos].start);
start = pos;
goto finish;
}
}
/* being here means we need to do an insert */
if (!realloc_if_full(self)) {
PyErr_NoMemory();
return -1;
}
memmove(self->lines + start + 1, self->lines + start,
(self->numlines - start) * sizeof(line));
self->numlines++;
self->livelines++;
finish:
self->lines[start] = *new;
self->dirty = true;
return 0;
}
static int lazymanifest_setitem(
lazymanifest *self, PyObject *key, PyObject *value)
{
char *path;
Py_ssize_t plen;
PyObject *pyhash;
Py_ssize_t hlen;
char *hash;
PyObject *pyflags;
char *flags;
Py_ssize_t flen;
size_t dlen;
char *dest;
int i;
line new;
if (!PyBytes_Check(key)) {
PyErr_Format(PyExc_TypeError,
"setitem: manifest keys must be a string.");
return -1;
}
if (!value) {
return lazymanifest_delitem(self, key);
}
if (!PyTuple_Check(value) || PyTuple_Size(value) != 2) {
PyErr_Format(PyExc_TypeError,
"Manifest values must be a tuple of (node, flags).");
return -1;
}
if (PyBytes_AsStringAndSize(key, &path, &plen) == -1) {
return -1;
}
pyhash = PyTuple_GetItem(value, 0);
if (!PyBytes_Check(pyhash)) {
PyErr_Format(PyExc_TypeError,
"node must be a 20-byte string");
return -1;
}
hlen = PyBytes_Size(pyhash);
/* Some parts of the codebase try and set 21 or 22
* byte "hash" values in order to perturb things for
* status. We have to preserve at least the 21st
* byte. Sigh. If there's a 22nd byte, we drop it on
* the floor, which works fine.
*/
if (hlen != 20 && hlen != 21 && hlen != 22) {
PyErr_Format(PyExc_TypeError,
"node must be a 20-byte string");
return -1;
}
hash = PyBytes_AsString(pyhash);
pyflags = PyTuple_GetItem(value, 1);
if (!PyBytes_Check(pyflags) || PyBytes_Size(pyflags) > 1) {
PyErr_Format(PyExc_TypeError,
"flags must a 0 or 1 byte string");
return -1;
}
if (PyBytes_AsStringAndSize(pyflags, &flags, &flen) == -1) {
return -1;
}
/* one null byte and one newline */
dlen = plen + 41 + flen + 1;
dest = malloc(dlen);
if (!dest) {
PyErr_NoMemory();
return -1;
}
memcpy(dest, path, plen + 1);
for (i = 0; i < 20; i++) {
/* Cast to unsigned, so it will not get sign-extended when promoted
* to int (as is done when passing to a variadic function)
*/
sprintf(dest + plen + 1 + (i * 2), "%02x", (unsigned char)hash[i]);
}
memcpy(dest + plen + 41, flags, flen);
dest[plen + 41 + flen] = '\n';
new.start = dest;
new.len = dlen;
new.hash_suffix = '\0';
if (hlen > 20) {
new.hash_suffix = hash[20];
}
new.from_malloc = true; /* is `start` a pointer we allocated? */
new.deleted = false; /* is this entry deleted? */
if (internalsetitem(self, &new)) {
return -1;
}
return 0;
}
static PyMappingMethods lazymanifest_mapping_methods = {
(lenfunc)lazymanifest_size, /* mp_length */
(binaryfunc)lazymanifest_getitem, /* mp_subscript */
(objobjargproc)lazymanifest_setitem, /* mp_ass_subscript */
};
/* sequence methods (important or __contains__ builds an iterator) */
static int lazymanifest_contains(lazymanifest *self, PyObject *key)
{
line needle;
line *hit;
if (!PyBytes_Check(key)) {
/* Our keys are always strings, so if the contains
* check is for a non-string, just return false. */
return 0;
}
needle.start = PyBytes_AsString(key);
hit = bsearch(&needle, self->lines, self->numlines, sizeof(line),
&linecmp);
if (!hit || hit->deleted) {
return 0;
}
return 1;
}
static PySequenceMethods lazymanifest_seq_meths = {
(lenfunc)lazymanifest_size, /* sq_length */
0, /* sq_concat */
0, /* sq_repeat */
0, /* sq_item */
0, /* sq_slice */
0, /* sq_ass_item */
0, /* sq_ass_slice */
(objobjproc)lazymanifest_contains, /* sq_contains */
0, /* sq_inplace_concat */
0, /* sq_inplace_repeat */
};
/* Other methods (copy, diff, etc) */
static PyTypeObject lazymanifestType;
/* If the manifest has changes, build the new manifest text and reindex it. */
Gregory Szorc
cext: wrap before brace for functions...
r34441 static int compact(lazymanifest *self)
{
Yuya Nishihara
parsers: switch to policy importer...
r32372 int i;
ssize_t need = 0;
char *data;
line *src, *dst;
PyObject *pydata;
if (!self->dirty)
return 0;
for (i = 0; i < self->numlines; i++) {
if (!self->lines[i].deleted) {
need += self->lines[i].len;
}
}
pydata = PyBytes_FromStringAndSize(NULL, need);
if (!pydata)
return -1;
data = PyBytes_AsString(pydata);
if (!data) {
return -1;
}
src = self->lines;
dst = self->lines;
for (i = 0; i < self->numlines; i++, src++) {
char *tofree = NULL;
if (src->from_malloc) {
tofree = src->start;
}
if (!src->deleted) {
memcpy(data, src->start, src->len);
*dst = *src;
dst->start = data;
dst->from_malloc = false;
data += dst->len;
dst++;
}
free(tofree);
}
Py_DECREF(self->pydata);
self->pydata = pydata;
self->numlines = self->livelines;
self->dirty = false;
return 0;
}
static PyObject *lazymanifest_text(lazymanifest *self)
{
if (compact(self) != 0) {
PyErr_NoMemory();
return NULL;
}
Py_INCREF(self->pydata);
return self->pydata;
}
static lazymanifest *lazymanifest_copy(lazymanifest *self)
{
lazymanifest *copy = NULL;
if (compact(self) != 0) {
goto nomem;
}
copy = PyObject_New(lazymanifest, &lazymanifestType);
if (!copy) {
goto nomem;
}
Yuya Nishihara
manifest: fix possible SEGV caused by uninitialized lazymanifest fields...
r38346 lazymanifest_init_early(copy);
Yuya Nishihara
parsers: switch to policy importer...
r32372 copy->numlines = self->numlines;
copy->livelines = self->livelines;
copy->dirty = false;
copy->lines = malloc(self->maxlines *sizeof(line));
if (!copy->lines) {
goto nomem;
}
memcpy(copy->lines, self->lines, self->numlines * sizeof(line));
copy->maxlines = self->maxlines;
copy->pydata = self->pydata;
Py_INCREF(copy->pydata);
return copy;
nomem:
PyErr_NoMemory();
Py_XDECREF(copy);
return NULL;
}
static lazymanifest *lazymanifest_filtercopy(
lazymanifest *self, PyObject *matchfn)
{
lazymanifest *copy = NULL;
int i;
if (!PyCallable_Check(matchfn)) {
PyErr_SetString(PyExc_TypeError, "matchfn must be callable");
return NULL;
}
/* compact ourselves first to avoid double-frees later when we
* compact tmp so that it doesn't have random pointers to our
* underlying from_malloc-data (self->pydata is safe) */
if (compact(self) != 0) {
goto nomem;
}
copy = PyObject_New(lazymanifest, &lazymanifestType);
if (!copy) {
goto nomem;
}
Yuya Nishihara
manifest: fix possible SEGV caused by uninitialized lazymanifest fields...
r38346 lazymanifest_init_early(copy);
Yuya Nishihara
parsers: switch to policy importer...
r32372 copy->dirty = true;
copy->lines = malloc(self->maxlines * sizeof(line));
if (!copy->lines) {
goto nomem;
}
copy->maxlines = self->maxlines;
copy->numlines = 0;
copy->pydata = self->pydata;
Yuya Nishihara
manifest: incref/decref copy->pydata to clarify 'copy' holds a reference
r39486 Py_INCREF(copy->pydata);
Yuya Nishihara
parsers: switch to policy importer...
r32372 for (i = 0; i < self->numlines; i++) {
PyObject *arglist = NULL, *result = NULL;
Yuya Nishihara
py3: bulk-replace bytes format specifier passed to Py_BuildValue()...
r36637 arglist = Py_BuildValue(PY23("(s)", "(y)"),
self->lines[i].start);
Yuya Nishihara
parsers: switch to policy importer...
r32372 if (!arglist) {
Yuya Nishihara
manifest: fix leak on error return from lazymanifest_filtercopy()...
r39487 goto bail;
Yuya Nishihara
parsers: switch to policy importer...
r32372 }
result = PyObject_CallObject(matchfn, arglist);
Py_DECREF(arglist);
/* if the callback raised an exception, just let it
* through and give up */
if (!result) {
Yuya Nishihara
manifest: fix leak on error return from lazymanifest_filtercopy()...
r39487 goto bail;
Yuya Nishihara
parsers: switch to policy importer...
r32372 }
if (PyObject_IsTrue(result)) {
assert(!(self->lines[i].from_malloc));
copy->lines[copy->numlines++] = self->lines[i];
}
Py_DECREF(result);
}
copy->livelines = copy->numlines;
return copy;
nomem:
PyErr_NoMemory();
Yuya Nishihara
manifest: fix leak on error return from lazymanifest_filtercopy()...
r39487 bail:
Yuya Nishihara
parsers: switch to policy importer...
r32372 Py_XDECREF(copy);
return NULL;
}
static PyObject *lazymanifest_diff(lazymanifest *self, PyObject *args)
{
lazymanifest *other;
PyObject *pyclean = NULL;
bool listclean;
PyObject *emptyTup = NULL, *ret = NULL;
PyObject *es;
int sneedle = 0, oneedle = 0;
if (!PyArg_ParseTuple(args, "O!|O", &lazymanifestType, &other, &pyclean)) {
return NULL;
}
listclean = (!pyclean) ? false : PyObject_IsTrue(pyclean);
es = PyBytes_FromString("");
if (!es) {
goto nomem;
}
emptyTup = PyTuple_Pack(2, Py_None, es);
Py_DECREF(es);
if (!emptyTup) {
goto nomem;
}
ret = PyDict_New();
if (!ret) {
goto nomem;
}
while (sneedle != self->numlines || oneedle != other->numlines) {
line *left = self->lines + sneedle;
line *right = other->lines + oneedle;
int result;
PyObject *key;
PyObject *outer;
/* If we're looking at a deleted entry and it's not
* the end of the manifest, just skip it. */
Jun Wu
lazymanifest: avoid reading uninitialized memory...
r35828 if (sneedle < self->numlines && left->deleted) {
Yuya Nishihara
parsers: switch to policy importer...
r32372 sneedle++;
continue;
}
Jun Wu
lazymanifest: avoid reading uninitialized memory...
r35828 if (oneedle < other->numlines && right->deleted) {
Yuya Nishihara
parsers: switch to policy importer...
r32372 oneedle++;
continue;
}
/* if we're at the end of either manifest, then we
* know the remaining items are adds so we can skip
* the strcmp. */
if (sneedle == self->numlines) {
result = 1;
} else if (oneedle == other->numlines) {
result = -1;
} else {
result = linecmp(left, right);
}
key = result <= 0 ?
PyBytes_FromString(left->start) :
PyBytes_FromString(right->start);
if (!key)
goto nomem;
if (result < 0) {
PyObject *l = hashflags(left);
if (!l) {
goto nomem;
}
outer = PyTuple_Pack(2, l, emptyTup);
Py_DECREF(l);
if (!outer) {
goto nomem;
}
PyDict_SetItem(ret, key, outer);
Py_DECREF(outer);
sneedle++;
} else if (result > 0) {
PyObject *r = hashflags(right);
if (!r) {
goto nomem;
}
outer = PyTuple_Pack(2, emptyTup, r);
Py_DECREF(r);
if (!outer) {
goto nomem;
}
PyDict_SetItem(ret, key, outer);
Py_DECREF(outer);
oneedle++;
} else {
/* file exists in both manifests */
if (left->len != right->len
|| memcmp(left->start, right->start, left->len)
|| left->hash_suffix != right->hash_suffix) {
PyObject *l = hashflags(left);
PyObject *r;
if (!l) {
goto nomem;
}
r = hashflags(right);
if (!r) {
Py_DECREF(l);
goto nomem;
}
outer = PyTuple_Pack(2, l, r);
Py_DECREF(l);
Py_DECREF(r);
if (!outer) {
goto nomem;
}
PyDict_SetItem(ret, key, outer);
Py_DECREF(outer);
} else if (listclean) {
PyDict_SetItem(ret, key, Py_None);
}
sneedle++;
oneedle++;
}
Py_DECREF(key);
}
Py_DECREF(emptyTup);
return ret;
nomem:
PyErr_NoMemory();
Py_XDECREF(ret);
Py_XDECREF(emptyTup);
return NULL;
}
static PyMethodDef lazymanifest_methods[] = {
{"iterkeys", (PyCFunction)lazymanifest_getkeysiter, METH_NOARGS,
"Iterate over file names in this lazymanifest."},
{"iterentries", (PyCFunction)lazymanifest_getentriesiter, METH_NOARGS,
"Iterate over (path, nodeid, flags) tuples in this lazymanifest."},
{"copy", (PyCFunction)lazymanifest_copy, METH_NOARGS,
"Make a copy of this lazymanifest."},
{"filtercopy", (PyCFunction)lazymanifest_filtercopy, METH_O,
"Make a copy of this manifest filtered by matchfn."},
{"diff", (PyCFunction)lazymanifest_diff, METH_VARARGS,
"Compare this lazymanifest to another one."},
{"text", (PyCFunction)lazymanifest_text, METH_NOARGS,
"Encode this manifest to text."},
{NULL},
};
#ifdef IS_PY3K
#define LAZYMANIFEST_TPFLAGS Py_TPFLAGS_DEFAULT
#else
#define LAZYMANIFEST_TPFLAGS Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_SEQUENCE_IN
#endif
static PyTypeObject lazymanifestType = {
Augie Fackler
cext: add /* header */ comment to all PyVarObject_HEAD_INIT() calls...
r34862 PyVarObject_HEAD_INIT(NULL, 0) /* header */
Yuya Nishihara
parsers: switch to policy importer...
r32372 "parsers.lazymanifest", /* tp_name */
sizeof(lazymanifest), /* tp_basicsize */
0, /* tp_itemsize */
(destructor)lazymanifest_dealloc, /* tp_dealloc */
0, /* tp_print */
0, /* tp_getattr */
0, /* tp_setattr */
0, /* tp_compare */
0, /* tp_repr */
0, /* tp_as_number */
&lazymanifest_seq_meths, /* tp_as_sequence */
&lazymanifest_mapping_methods, /* tp_as_mapping */
0, /* tp_hash */
0, /* tp_call */
0, /* tp_str */
0, /* tp_getattro */
0, /* tp_setattro */
0, /* tp_as_buffer */
LAZYMANIFEST_TPFLAGS, /* tp_flags */
"TODO(augie)", /* tp_doc */
0, /* tp_traverse */
0, /* tp_clear */
0, /* tp_richcompare */
0, /* tp_weaklistoffset */
(getiterfunc)lazymanifest_getkeysiter, /* tp_iter */
0, /* tp_iternext */
lazymanifest_methods, /* tp_methods */
0, /* tp_members */
0, /* tp_getset */
0, /* tp_base */
0, /* tp_dict */
0, /* tp_descr_get */
0, /* tp_descr_set */
0, /* tp_dictoffset */
(initproc)lazymanifest_init, /* tp_init */
0, /* tp_alloc */
};
void manifest_module_init(PyObject * mod)
{
lazymanifestType.tp_new = PyType_GenericNew;
if (PyType_Ready(&lazymanifestType) < 0)
return;
Py_INCREF(&lazymanifestType);
PyModule_AddObject(mod, "lazymanifest",
(PyObject *)&lazymanifestType);
}