##// END OF EJS Templates
upstream » mercurial-mirror
RSS

Clone from https://www.mercurial-scm.org/repo/hg-all

largefiles: check file in the repo store before checking remotely (issue5257)...
largefiles: check file in the repo store before checking remotely (issue5257) Problem was files to check were gathered in the repository where the verify was launched but verification was done on the remote store. It was observed when user committed in cloned repository and ran verify before pushing - committed files were marked as non existing. This commit fixes this by checking in the remote store only files that are not existing in the repository store where verify was launched. Solution is similiar to fd288d118074
Augie Fackler - - Load All Authors

File last commit:

r28184:11c2f8af default
r29421:ecbbf4d5 default
Show More
test-automv.t
338 lines | 7.0 KiB | text/troff | Tads3Lexer
/ tests / test-automv.t
History | Source | Raw |Copy content |Copy permalink
Martijn Pieters
automv: add some context for the tests
 r28147 Tests for the automv extension; detect moved files at commit time.
Martijn Pieters
automv: new experimental extension...
 r28129 $ cat >> $HGRCPATH << EOF
> [extensions]
> automv=
> rebase=
> EOF
Setup repo
$ hg init repo
$ cd repo
Test automv command for commit
Martijn Pieters
automv: use 95 as the default similarity threshold...
 r28183 $ printf 'foo\nbar\nbaz\n' > a.txt
Martijn Pieters
automv: new experimental extension...
 r28129 $ hg add a.txt
$ hg commit -m 'init repo with a'
mv/rm/add
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit -m 'msg'
detected move of 1 files
$ hg status --change . -C
A b.txt
a.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/modif
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
Martijn Pieters
automv: use 95 as the default similarity threshold...
 r28183 $ printf '\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit -m 'msg'
detected move of 1 files
created new head
$ hg status --change . -C
A b.txt
a.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/modif
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
Martijn Pieters
automv: new experimental extension...
 r28129 $ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit -m 'msg'
created new head
$ hg status --change . -C
A b.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/modif/changethreshold
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
Augie Fackler
test-automv: fix inline config settings for 5ec1ce8fdf0a
 r28184 $ hg commit --config automv.similarity='60' -m 'msg'
Martijn Pieters
automv: new experimental extension...
 r28129 detected move of 1 files
created new head
$ hg status --change . -C
A b.txt
a.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv
$ mv a.txt b.txt
$ hg status -C
! a.txt
? b.txt
$ hg commit -m 'msg'
nothing changed (1 missing files, see 'hg status')
[1]
$ hg status -C
! a.txt
? b.txt
$ hg revert -aqC
$ rm b.txt
mv/rm/add/notincommitfiles
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ echo 'bar' > c.txt
$ hg add c.txt
$ hg status -C
A b.txt
A c.txt
R a.txt
$ hg commit c.txt -m 'msg'
created new head
$ hg status --change . -C
A c.txt
$ hg status -C
A b.txt
R a.txt
$ hg up -r 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg rm a.txt
$ echo 'bar' > c.txt
$ hg add c.txt
$ hg commit -m 'msg'
detected move of 1 files
created new head
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/--no-automv
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --no-automv -m 'msg'
created new head
$ hg status --change . -C
A b.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
Test automv command for commit --amend
mv/rm/add
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/modif
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
Martijn Pieters
automv: use 95 as the default similarity threshold...
 r28183 $ printf '\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/modif
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
Martijn Pieters
automv: new experimental extension...
 r28129 $ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/modif/changethreshold
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
Augie Fackler
test-automv: fix inline config settings for 5ec1ce8fdf0a
 r28184 $ hg commit --amend --config automv.similarity='60' -m 'amended'
Martijn Pieters
automv: new experimental extension...
 r28129 detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg status -C
! a.txt
? b.txt
$ hg commit --amend -m 'amended'
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status -C
! a.txt
? b.txt
$ hg up -Cr 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/notincommitfiles
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ echo 'bar' > d.txt
$ hg add d.txt
$ hg status -C
A b.txt
A d.txt
R a.txt
$ hg commit --amend -m 'amended' d.txt
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A c.txt
A d.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
A d.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 3 files removed, 0 files unresolved
mv/rm/add/--no-automv
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended' --no-automv
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/commit/add/amend
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg status -C
R a.txt
? b.txt
$ hg commit -m "removed a"
$ hg add b.txt
$ hg commit --amend -m 'amended'
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
$ hg status --change . -C
A b.txt
R a.txt
Martijn Pieters
automv: use 95 as the default similarity threshold...
 r28183
error conditions
$ cat >> $HGRCPATH << EOF
> [automv]
> similarity=110
> EOF
$ hg commit -m 'revision to amend to'
abort: automv.similarity must be between 0 and 100
[255]