diff --git a/tests/test-bookmarks-pushpull.t b/tests/test-bookmarks-pushpull.t
--- a/tests/test-bookmarks-pushpull.t
+++ b/tests/test-bookmarks-pushpull.t
@@ -734,7 +734,7 @@ Check hook preventing push (issue4455)
   > ssh=ssh://user@dummy/issue4455-dest
   > http=http://localhost:$HGPORT/
   > [ui]
-  > ssh=dummyssh
+  > ssh=python "$TESTDIR/dummyssh"
   > EOF
   $ cat >> ../issue4455-dest/.hg/hgrc << EOF
   > [hooks]
diff --git a/tests/test-bundle2-exchange.t b/tests/test-bundle2-exchange.t
--- a/tests/test-bundle2-exchange.t
+++ b/tests/test-bundle2-exchange.t
@@ -18,7 +18,7 @@ enable obsolescence
   > bundle2-exp=True
   > bundle2-output-capture=True
   > [ui]
-  > ssh=dummyssh
+  > ssh=python "$TESTDIR/dummyssh"
   > logtemplate={rev}:{node|short} {phase} {author} {bookmarks} {desc|firstline}
   > [web]
   > push_ssl = false
diff --git a/tests/test-bundle2-format.t b/tests/test-bundle2-format.t
--- a/tests/test-bundle2-format.t
+++ b/tests/test-bundle2-format.t
@@ -210,7 +210,7 @@ Create an extension to test bundle2 API
   > bundle2-exp=True
   > evolution=createmarkers
   > [ui]
-  > ssh=dummyssh
+  > ssh=python "$TESTDIR/dummyssh"
   > logtemplate={rev}:{node|short} {phase} {author} {bookmarks} {desc|firstline}
   > [web]
   > push_ssl = false
diff --git a/tests/test-bundle2-pushback.t b/tests/test-bundle2-pushback.t
--- a/tests/test-bundle2-pushback.t
+++ b/tests/test-bundle2-pushback.t
@@ -25,7 +25,7 @@
 
   $ cat >> $HGRCPATH <<EOF
   > [ui]
-  > ssh = dummyssh
+  > ssh = python "$TESTDIR/dummyssh"
   > username = nobody <no.reply@example.com>
   > 
   > [alias]
diff --git a/tests/test-bundle2-remote-changegroup.t b/tests/test-bundle2-remote-changegroup.t
--- a/tests/test-bundle2-remote-changegroup.t
+++ b/tests/test-bundle2-remote-changegroup.t
@@ -81,7 +81,7 @@ Start a simple HTTP server to serve bund
   > [experimental]
   > bundle2-exp=True
   > [ui]
-  > ssh=dummyssh
+  > ssh=python "$TESTDIR/dummyssh"
   > logtemplate={rev}:{node|short} {phase} {author} {bookmarks} {desc|firstline}
   > EOF
 
diff --git a/tests/test-init.t b/tests/test-init.t
--- a/tests/test-init.t
+++ b/tests/test-init.t
@@ -84,7 +84,7 @@ test failure
 
 init+push to remote2
 
-  $ hg init -e dummyssh ssh://user@dummy/remote2
+  $ hg init -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
   $ hg incoming -R remote2 local
   comparing with local
   changeset:   0:08b9e9f63b32
@@ -94,7 +94,7 @@ init+push to remote2
   summary:     init
   
 
-  $ hg push -R local -e dummyssh ssh://user@dummy/remote2
+  $ hg push -R local -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
   pushing to ssh://user@dummy/remote2
   searching for changes
   remote: adding changesets
@@ -104,7 +104,7 @@ init+push to remote2
 
 clone to remote1
 
-  $ hg clone -e dummyssh local ssh://user@dummy/remote1
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
   searching for changes
   remote: adding changesets
   remote: adding manifests
@@ -112,7 +112,7 @@ clone to remote1
   remote: added 1 changesets with 1 changes to 1 files
 
 The largefiles extension doesn't crash
-  $ hg clone -e dummyssh local ssh://user@dummy/remotelf --config extensions.largefiles=
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remotelf --config extensions.largefiles=
   searching for changes
   remote: adding changesets
   remote: adding manifests
@@ -121,14 +121,14 @@ The largefiles extension doesn't crash
 
 init to existing repo
 
-  $ hg init -e dummyssh ssh://user@dummy/remote1
+  $ hg init -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote1
   abort: repository remote1 already exists!
   abort: could not create remote repo!
   [255]
 
 clone to existing repo
 
-  $ hg clone -e dummyssh local ssh://user@dummy/remote1
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
   abort: repository remote1 already exists!
   abort: could not create remote repo!
   [255]
@@ -224,7 +224,7 @@ clone bookmarks
   $ hg -R local bookmark test
   $ hg -R local bookmarks
    * test                      0:08b9e9f63b32
-  $ hg clone -e dummyssh local ssh://user@dummy/remote-bookmarks
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote-bookmarks
   searching for changes
   remote: adding changesets
   remote: adding manifests
diff --git a/tests/test-largefiles-wireproto.t b/tests/test-largefiles-wireproto.t
--- a/tests/test-largefiles-wireproto.t
+++ b/tests/test-largefiles-wireproto.t
@@ -110,7 +110,7 @@ used all HGPORTs, kill all daemons
 #endif
 
 vanilla clients locked out from largefiles ssh repos
-  $ hg --config extensions.largefiles=! clone -e dummyssh ssh://user@dummy/r4 r5
+  $ hg --config extensions.largefiles=! clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/r4 r5
   remote: 
   remote: This repository uses the largefiles extension.
   remote: 
diff --git a/tests/test-ssh-bundle1.t b/tests/test-ssh-bundle1.t
--- a/tests/test-ssh-bundle1.t
+++ b/tests/test-ssh-bundle1.t
@@ -42,21 +42,21 @@ configure for serving
 
 repo not found error
 
-  $ hg clone -e dummyssh ssh://user@dummy/nonexistent local
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/nonexistent local
   remote: abort: there is no Mercurial repository here (.hg not found)!
   abort: no suitable response from remote hg!
   [255]
 
 non-existent absolute path
 
-  $ hg clone -e dummyssh ssh://user@dummy//`pwd`/nonexistent local
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy//`pwd`/nonexistent local
   remote: abort: there is no Mercurial repository here (.hg not found)!
   abort: no suitable response from remote hg!
   [255]
 
 clone remote via stream
 
-  $ hg clone -e dummyssh --uncompressed ssh://user@dummy/remote local-stream
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed ssh://user@dummy/remote local-stream
   streaming all changes
   4 files to transfer, 615 bytes of data
   transferred 615 bytes in * seconds (*) (glob)
@@ -78,7 +78,7 @@ clone remote via stream
 clone bookmarks via stream
 
   $ hg -R local-stream book mybook
-  $ hg clone -e dummyssh --uncompressed ssh://user@dummy/local-stream stream2
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed ssh://user@dummy/local-stream stream2
   streaming all changes
   4 files to transfer, 615 bytes of data
   transferred 615 bytes in * seconds (*) (glob)
@@ -94,7 +94,7 @@ clone bookmarks via stream
 
 clone remote via pull
 
-  $ hg clone -e dummyssh ssh://user@dummy/remote local
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local
   requesting all changes
   adding changesets
   adding manifests
@@ -119,14 +119,14 @@ empty default pull
 
   $ hg paths
   default = ssh://user@dummy/remote
-  $ hg pull -e dummyssh
+  $ hg pull -e "python \"$TESTDIR/dummyssh\""
   pulling from ssh://user@dummy/remote
   searching for changes
   no changes found
 
 pull from wrong ssh URL
 
-  $ hg pull -e dummyssh ssh://user@dummy/doesnotexist
+  $ hg pull -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/doesnotexist
   pulling from ssh://user@dummy/doesnotexist
   remote: abort: there is no Mercurial repository here (.hg not found)!
   abort: no suitable response from remote hg!
@@ -141,7 +141,7 @@ updating rc
 
   $ echo "default-push = ssh://user@dummy/remote" >> .hg/hgrc
   $ echo "[ui]" >> .hg/hgrc
-  $ echo "ssh = dummyssh" >> .hg/hgrc
+  $ echo "ssh = python \"$TESTDIR/dummyssh\"" >> .hg/hgrc
 
 find outgoing
 
@@ -158,7 +158,7 @@ find outgoing
 
 find incoming on the remote side
 
-  $ hg incoming -R ../remote -e dummyssh ssh://user@dummy/local
+  $ hg incoming -R ../remote -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/local
   comparing with ssh://user@dummy/local
   searching for changes
   changeset:   3:a28a9d1a809c
@@ -171,7 +171,7 @@ find incoming on the remote side
 
 find incoming on the remote side (using absolute path)
 
-  $ hg incoming -R ../remote -e dummyssh "ssh://user@dummy/`pwd`"
+  $ hg incoming -R ../remote -e "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/`pwd`"
   comparing with ssh://user@dummy/$TESTTMP/local
   searching for changes
   changeset:   3:a28a9d1a809c
@@ -218,7 +218,7 @@ check remote tip
 test pushkeys and bookmarks
 
   $ cd ../local
-  $ hg debugpushkey --config ui.ssh=dummyssh ssh://user@dummy/remote namespaces
+  $ hg debugpushkey --config ui.ssh="python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote namespaces
   bookmarks	
   namespaces	
   phases	
@@ -233,7 +233,7 @@ test pushkeys and bookmarks
   no changes found
   exporting bookmark foo
   [1]
-  $ hg debugpushkey --config ui.ssh=dummyssh ssh://user@dummy/remote bookmarks
+  $ hg debugpushkey --config ui.ssh="python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote bookmarks
   foo	1160648e36cec0054048a7edc4110c6f84fde594
   $ hg book -f foo
   $ hg push --traceback
@@ -303,7 +303,7 @@ clone bookmarks
   $ hg -R ../remote bookmark test
   $ hg -R ../remote bookmarks
    * test                      4:6c0482d977a3
-  $ hg clone -e dummyssh ssh://user@dummy/remote local-bookmarks
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local-bookmarks
   requesting all changes
   adding changesets
   adding manifests
@@ -330,21 +330,21 @@ hide outer repo
 
 Test remote paths with spaces (issue2983):
 
-  $ hg init --ssh dummyssh "ssh://user@dummy/a repo"
+  $ hg init --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
   $ touch "$TESTTMP/a repo/test"
   $ hg -R 'a repo' commit -A -m "test"
   adding test
   $ hg -R 'a repo' tag tag
-  $ hg id --ssh dummyssh "ssh://user@dummy/a repo"
+  $ hg id --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
   73649e48688a
 
-  $ hg id --ssh dummyssh "ssh://user@dummy/a repo#noNoNO"
+  $ hg id --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo#noNoNO"
   abort: unknown revision 'noNoNO'!
   [255]
 
 Test (non-)escaping of remote paths with spaces when cloning (issue3145):
 
-  $ hg clone --ssh dummyssh "ssh://user@dummy/a repo"
+  $ hg clone --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
   destination directory: a repo
   abort: destination 'a repo' is not empty
   [255]
@@ -436,7 +436,7 @@ stderr from remote commands should be pr
   > [paths]
   > default-push = ssh://user@dummy/remote
   > [ui]
-  > ssh = dummyssh
+  > ssh = python "$TESTDIR/dummyssh"
   > [extensions]
   > localwrite = localwrite.py
   > EOF
@@ -457,7 +457,7 @@ debug output
 
   $ hg pull --debug ssh://user@dummy/remote
   pulling from ssh://user@dummy/remote
-  running dummyssh user@dummy ('|")hg -R remote serve --stdio('|") (re)
+  running python ".*/dummyssh" user@dummy ('|")hg -R remote serve --stdio('|") (re)
   sending hello command
   sending between command
   remote: 345
diff --git a/tests/test-ssh-clone-r.t b/tests/test-ssh-clone-r.t
--- a/tests/test-ssh-clone-r.t
+++ b/tests/test-ssh-clone-r.t
@@ -17,7 +17,7 @@ creating 'remote' repo
 clone remote via stream
 
   $ for i in 0 1 2 3 4 5 6 7 8; do
-  >    hg clone -e dummyssh --uncompressed -r "$i" ssh://user@dummy/remote test-"$i"
+  >    hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed -r "$i" ssh://user@dummy/remote test-"$i"
   >    if cd test-"$i"; then
   >       hg verify
   >       cd ..
@@ -139,7 +139,7 @@ clone remote via stream
   4 files, 9 changesets, 7 total revisions
   $ cd ..
   $ cd test-1
-  $ hg pull -e dummyssh -r 4 ssh://user@dummy/remote
+  $ hg pull -e "python \"$TESTDIR/dummyssh\"" -r 4 ssh://user@dummy/remote
   pulling from ssh://user@dummy/remote
   searching for changes
   adding changesets
@@ -153,7 +153,7 @@ clone remote via stream
   crosschecking files in changesets and manifests
   checking files
   1 files, 3 changesets, 2 total revisions
-  $ hg pull -e dummyssh ssh://user@dummy/remote
+  $ hg pull -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote
   pulling from ssh://user@dummy/remote
   searching for changes
   adding changesets
@@ -163,7 +163,7 @@ clone remote via stream
   (run 'hg update' to get a working copy)
   $ cd ..
   $ cd test-2
-  $ hg pull -e dummyssh -r 5 ssh://user@dummy/remote
+  $ hg pull -e "python \"$TESTDIR/dummyssh\"" -r 5 ssh://user@dummy/remote
   pulling from ssh://user@dummy/remote
   searching for changes
   adding changesets
@@ -177,7 +177,7 @@ clone remote via stream
   crosschecking files in changesets and manifests
   checking files
   1 files, 5 changesets, 3 total revisions
-  $ hg pull -e dummyssh ssh://user@dummy/remote
+  $ hg pull -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote
   pulling from ssh://user@dummy/remote
   searching for changes
   adding changesets
diff --git a/tests/test-ssh.t b/tests/test-ssh.t
--- a/tests/test-ssh.t
+++ b/tests/test-ssh.t
@@ -33,21 +33,21 @@ configure for serving
 
 repo not found error
 
-  $ hg clone -e dummyssh ssh://user@dummy/nonexistent local
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/nonexistent local
   remote: abort: there is no Mercurial repository here (.hg not found)!
   abort: no suitable response from remote hg!
   [255]
 
 non-existent absolute path
 
-  $ hg clone -e dummyssh ssh://user@dummy//`pwd`/nonexistent local
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy//`pwd`/nonexistent local
   remote: abort: there is no Mercurial repository here (.hg not found)!
   abort: no suitable response from remote hg!
   [255]
 
 clone remote via stream
 
-  $ hg clone -e dummyssh --uncompressed ssh://user@dummy/remote local-stream
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed ssh://user@dummy/remote local-stream
   streaming all changes
   4 files to transfer, 615 bytes of data
   transferred 615 bytes in * seconds (*) (glob)
@@ -69,7 +69,7 @@ clone remote via stream
 clone bookmarks via stream
 
   $ hg -R local-stream book mybook
-  $ hg clone -e dummyssh --uncompressed ssh://user@dummy/local-stream stream2
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed ssh://user@dummy/local-stream stream2
   streaming all changes
   4 files to transfer, 615 bytes of data
   transferred 615 bytes in * seconds (*) (glob)
@@ -85,7 +85,7 @@ clone bookmarks via stream
 
 clone remote via pull
 
-  $ hg clone -e dummyssh ssh://user@dummy/remote local
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local
   requesting all changes
   adding changesets
   adding manifests
@@ -110,14 +110,14 @@ empty default pull
 
   $ hg paths
   default = ssh://user@dummy/remote
-  $ hg pull -e dummyssh
+  $ hg pull -e "python \"$TESTDIR/dummyssh\""
   pulling from ssh://user@dummy/remote
   searching for changes
   no changes found
 
 pull from wrong ssh URL
 
-  $ hg pull -e dummyssh ssh://user@dummy/doesnotexist
+  $ hg pull -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/doesnotexist
   pulling from ssh://user@dummy/doesnotexist
   remote: abort: there is no Mercurial repository here (.hg not found)!
   abort: no suitable response from remote hg!
@@ -132,7 +132,7 @@ updating rc
 
   $ echo "default-push = ssh://user@dummy/remote" >> .hg/hgrc
   $ echo "[ui]" >> .hg/hgrc
-  $ echo "ssh = dummyssh" >> .hg/hgrc
+  $ echo "ssh = python \"$TESTDIR/dummyssh\"" >> .hg/hgrc
 
 find outgoing
 
@@ -149,7 +149,7 @@ find outgoing
 
 find incoming on the remote side
 
-  $ hg incoming -R ../remote -e dummyssh ssh://user@dummy/local
+  $ hg incoming -R ../remote -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/local
   comparing with ssh://user@dummy/local
   searching for changes
   changeset:   3:a28a9d1a809c
@@ -162,7 +162,7 @@ find incoming on the remote side
 
 find incoming on the remote side (using absolute path)
 
-  $ hg incoming -R ../remote -e dummyssh "ssh://user@dummy/`pwd`"
+  $ hg incoming -R ../remote -e "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/`pwd`"
   comparing with ssh://user@dummy/$TESTTMP/local
   searching for changes
   changeset:   3:a28a9d1a809c
@@ -209,7 +209,7 @@ check remote tip
 test pushkeys and bookmarks
 
   $ cd ../local
-  $ hg debugpushkey --config ui.ssh=dummyssh ssh://user@dummy/remote namespaces
+  $ hg debugpushkey --config ui.ssh="python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote namespaces
   bookmarks	
   namespaces	
   phases	
@@ -224,7 +224,7 @@ test pushkeys and bookmarks
   no changes found
   exporting bookmark foo
   [1]
-  $ hg debugpushkey --config ui.ssh=dummyssh ssh://user@dummy/remote bookmarks
+  $ hg debugpushkey --config ui.ssh="python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote bookmarks
   foo	1160648e36cec0054048a7edc4110c6f84fde594
   $ hg book -f foo
   $ hg push --traceback
@@ -294,7 +294,7 @@ clone bookmarks
   $ hg -R ../remote bookmark test
   $ hg -R ../remote bookmarks
    * test                      4:6c0482d977a3
-  $ hg clone -e dummyssh ssh://user@dummy/remote local-bookmarks
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local-bookmarks
   requesting all changes
   adding changesets
   adding manifests
@@ -321,21 +321,21 @@ hide outer repo
 
 Test remote paths with spaces (issue2983):
 
-  $ hg init --ssh dummyssh "ssh://user@dummy/a repo"
+  $ hg init --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
   $ touch "$TESTTMP/a repo/test"
   $ hg -R 'a repo' commit -A -m "test"
   adding test
   $ hg -R 'a repo' tag tag
-  $ hg id --ssh dummyssh "ssh://user@dummy/a repo"
+  $ hg id --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
   73649e48688a
 
-  $ hg id --ssh dummyssh "ssh://user@dummy/a repo#noNoNO"
+  $ hg id --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo#noNoNO"
   abort: unknown revision 'noNoNO'!
   [255]
 
 Test (non-)escaping of remote paths with spaces when cloning (issue3145):
 
-  $ hg clone --ssh dummyssh "ssh://user@dummy/a repo"
+  $ hg clone --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
   destination directory: a repo
   abort: destination 'a repo' is not empty
   [255]
@@ -424,7 +424,7 @@ stderr from remote commands should be pr
   > [paths]
   > default-push = ssh://user@dummy/remote
   > [ui]
-  > ssh = dummyssh
+  > ssh = python "$TESTDIR/dummyssh"
   > [extensions]
   > localwrite = localwrite.py
   > EOF
@@ -445,7 +445,7 @@ debug output
 
   $ hg pull --debug ssh://user@dummy/remote
   pulling from ssh://user@dummy/remote
-  running dummyssh user@dummy ('|")hg -R remote serve --stdio('|") (re)
+  running python ".*/dummyssh" user@dummy ('|")hg -R remote serve --stdio('|") (re)
   sending hello command
   sending between command
   remote: 345
diff --git a/tests/test-subrepo-relative-path.t b/tests/test-subrepo-relative-path.t
--- a/tests/test-subrepo-relative-path.t
+++ b/tests/test-subrepo-relative-path.t
@@ -74,7 +74,7 @@ subrepo debug for 'main' clone
 
 subrepo paths with ssh urls
 
-  $ hg clone -e dummyssh ssh://user@dummy/cloned sshclone
+  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/cloned sshclone
   requesting all changes
   adding changesets
   adding manifests
@@ -89,7 +89,7 @@ subrepo paths with ssh urls
   added 1 changesets with 1 changes to 1 files
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
-  $ hg -R sshclone push -e dummyssh ssh://user@dummy/`pwd`/cloned
+  $ hg -R sshclone push -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/`pwd`/cloned
   pushing to ssh://user@dummy/$TESTTMP/cloned
   pushing subrepo sub to ssh://user@dummy/$TESTTMP/sub
   searching for changes
diff --git a/tests/test-wireproto.t b/tests/test-wireproto.t
--- a/tests/test-wireproto.t
+++ b/tests/test-wireproto.t
@@ -90,13 +90,13 @@ HTTP without the httpheader capability:
 
 SSH (try to exercise the ssh functionality with a dummy script):
 
-  $ hg debugwireargs --ssh dummyssh ssh://user@dummy/repo uno due tre quattro
+  $ hg debugwireargs --ssh "python $TESTDIR/dummyssh" ssh://user@dummy/repo uno due tre quattro
   uno due tre quattro None
-  $ hg debugwireargs --ssh dummyssh ssh://user@dummy/repo eins zwei --four vier
+  $ hg debugwireargs --ssh "python $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei --four vier
   eins zwei None vier None
-  $ hg debugwireargs --ssh dummyssh ssh://user@dummy/repo eins zwei
+  $ hg debugwireargs --ssh "python $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei
   eins zwei None None None
-  $ hg debugwireargs --ssh dummyssh ssh://user@dummy/repo eins zwei --five fuenf
+  $ hg debugwireargs --ssh "python $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei --five fuenf
   eins zwei None None None
 
 Explicitly kill daemons to let the test exit on Windows