# HG changeset patch
# User Matt Harbison <matt_harbison@yahoo.com>
# Date 2018-01-28 19:08:59
# Node ID f6ca1e11d8b4df46fa81464f6a635e338e347ffe
# Parent  b5df7fcf5d8093fcb16a5dbd4f0349216b44757f

revset: evaluate filesets against each revision for 'file()' (issue5778)

After f2aeff8a87b6, the fileset was evaluated to a set of files against the
working directory, and then those files were applied against each revision.  The
result was nonsense.  For example, `hg log -r 'file("set:exec()")'` on the
Mercurial repo listed revision 0 because it has the `hg` script, which is
currently +x.  But that bit wasn't applied until revision 280 (which
'contains()' properly indicates).

This technique was borrowed from checkstatus(), which services adds(),
modifies(), and removes(), so it seems safe enough.  The 'r:' case is explicitly
assigned to wdirrev, freeing up rev=None to mean "re-evaluate at each revision".
The distinction is important to avoid behavior changes with `hg log set:...`
(test-largefiles-misc.t and test-fileset-generated.t drop current log output
without this).  I'm not sure what the right behavior for that is (1fd352aa08fc
explicitly enabled this behavior for graphlog), but the day before the release
isn't the time to experiment.

diff --git a/mercurial/revset.py b/mercurial/revset.py
--- a/mercurial/revset.py
+++ b/mercurial/revset.py
@@ -1065,7 +1065,9 @@ def _matchfiles(repo, subset, x):
             if rev is not None:
                 raise error.ParseError('_matchfiles expected at most one '
                                        'revision')
-            if value != '': # empty means working directory; leave rev as None
+            if value == '': # empty means working directory
+                rev = node.wdirrev
+            else:
                 rev = value
         elif prefix == 'd:':
             if default is not None:
@@ -1076,9 +1078,9 @@ def _matchfiles(repo, subset, x):
             raise error.ParseError('invalid _matchfiles prefix: %s' % prefix)
     if not default:
         default = 'glob'
+    hasset = any(matchmod.patkind(p) == 'set' for p in pats + inc + exc)
 
-    m = matchmod.match(repo.root, repo.getcwd(), pats, include=inc,
-                       exclude=exc, ctx=repo[rev], default=default)
+    mcache = [None]
 
     # This directly read the changelog data as creating changectx for all
     # revisions is quite expensive.
@@ -1089,6 +1091,14 @@ def _matchfiles(repo, subset, x):
             files = repo[x].files()
         else:
             files = getfiles(x)
+
+        if not mcache[0] or (hasset and rev is None):
+            r = x if rev is None else rev
+            mcache[0] = matchmod.match(repo.root, repo.getcwd(), pats,
+                                       include=inc, exclude=exc, ctx=repo[r],
+                                       default=default)
+        m = mcache[0]
+
         for f in files:
             if m(f):
                 return True
diff --git a/tests/test-glog.t b/tests/test-glog.t
--- a/tests/test-glog.t
+++ b/tests/test-glog.t
@@ -1675,7 +1675,7 @@ Test falling back to slow path for non-e
       (string 'p:c')))
   <filteredset
     <spanset- 0:5>,
-    <matchfiles patterns=['a', 'c'], include=[] exclude=[], default='relpath', rev=None>>
+    <matchfiles patterns=['a', 'c'], include=[] exclude=[], default='relpath', rev=2147483647>>
 
 Test multiple --include/--exclude/paths
 
@@ -1694,7 +1694,7 @@ Test multiple --include/--exclude/paths
       (string 'x:e')))
   <filteredset
     <spanset- 0:5>,
-    <matchfiles patterns=['a', 'e'], include=['a', 'e'] exclude=['b', 'e'], default='relpath', rev=None>>
+    <matchfiles patterns=['a', 'e'], include=['a', 'e'] exclude=['b', 'e'], default='relpath', rev=2147483647>>
 
 Test glob expansion of pats
 
@@ -1732,7 +1732,7 @@ Test --follow on a directory
       (string 'p:dir')))
   <filteredset
     <generatorsetdesc->,
-    <matchfiles patterns=['dir'], include=[] exclude=[], default='relpath', rev=None>>
+    <matchfiles patterns=['dir'], include=[] exclude=[], default='relpath', rev=2147483647>>
   $ hg up -q tip
 
 Test --follow on file not in parent revision
@@ -1754,7 +1754,7 @@ Test --follow and patterns
       (string 'p:glob:*')))
   <filteredset
     <generatorsetdesc->,
-    <matchfiles patterns=['glob:*'], include=[] exclude=[], default='relpath', rev=None>>
+    <matchfiles patterns=['glob:*'], include=[] exclude=[], default='relpath', rev=2147483647>>
 
 Test --follow on a single rename
 
@@ -1875,7 +1875,7 @@ Test "set:..." and parent revision
       (string 'p:set:copied()')))
   <filteredset
     <spanset- 0:7>,
-    <matchfiles patterns=['set:copied()'], include=[] exclude=[], default='relpath', rev=None>>
+    <matchfiles patterns=['set:copied()'], include=[] exclude=[], default='relpath', rev=2147483647>>
   $ testlog --include "set:copied()"
   []
   (func
@@ -1886,11 +1886,13 @@ Test "set:..." and parent revision
       (string 'i:set:copied()')))
   <filteredset
     <spanset- 0:7>,
-    <matchfiles patterns=[], include=['set:copied()'] exclude=[], default='relpath', rev=None>>
+    <matchfiles patterns=[], include=['set:copied()'] exclude=[], default='relpath', rev=2147483647>>
   $ testlog -r "sort(file('set:copied()'), -rev)"
   ["sort(file('set:copied()'), -rev)"]
   []
-  <baseset []>
+  <filteredset
+    <fullreposet- 0:7>,
+    <matchfiles patterns=['set:copied()'], include=[] exclude=[], default='glob', rev=None>>
 
 Test --removed
 
@@ -1908,7 +1910,7 @@ Test --removed
       (string 'p:a')))
   <filteredset
     <spanset- 0:7>,
-    <matchfiles patterns=['a'], include=[] exclude=[], default='relpath', rev=None>>
+    <matchfiles patterns=['a'], include=[] exclude=[], default='relpath', rev=2147483647>>
   $ testlog --removed --follow a
   []
   (func
@@ -1919,7 +1921,7 @@ Test --removed
       (string 'p:a')))
   <filteredset
     <generatorsetdesc->,
-    <matchfiles patterns=['a'], include=[] exclude=[], default='relpath', rev=None>>
+    <matchfiles patterns=['a'], include=[] exclude=[], default='relpath', rev=2147483647>>
 
 Test --patch and --stat with --follow and --follow-first
 
@@ -2290,7 +2292,7 @@ Test subdir
       (string 'p:.')))
   <filteredset
     <spanset- 0:9>,
-    <matchfiles patterns=['.'], include=[] exclude=[], default='relpath', rev=None>>
+    <matchfiles patterns=['.'], include=[] exclude=[], default='relpath', rev=2147483647>>
   $ testlog ../b
   []
   (func
diff --git a/tests/test-largefiles-update.t b/tests/test-largefiles-update.t
--- a/tests/test-largefiles-update.t
+++ b/tests/test-largefiles-update.t
@@ -726,6 +726,20 @@ bit correctly on the platform being unaw
 
 #endif
 
+The fileset revset is evaluated for each revision, instead of once on wdir(),
+and then patterns matched on each revision.  Here, no exec bits are set in
+wdir(), but a matching revision is detected.
+
+(Teach large2 is not an executable. Maybe this is a bug of largefiles.)
+#if execbit
+  $ chmod -x .hglf/large2
+#endif
+
+  $ hg files 'set:exec()'
+  [1]
+  $ hg log -qr 'file("set:exec()")'
+  9:be1b433a65b1
+
 Test a fatal error interrupting an update. Verify that status report dirty
 files correctly after an interrupted update. Also verify that checking all
 hashes reveals it isn't clean.