bundle2: rename UnknownPartError to BundleValueError

We are going to raise exceptions for a wider range of cases: unsupported
mandatory stream and part parameters.  We rename the exception with a wider
name.

mercurial/bundle2.py

@@ -1,847 +1,849 b''
 # bundle2.py - generic container format to transmit arbitrary data.
 #
 # Copyright 2013 Facebook, Inc.
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 """Handling of the new bundle2 format
 
 The goal of bundle2 is to act as an atomically packet to transmit a set of
 payloads in an application agnostic way. It consist in a sequence of "parts"
 that will be handed to and processed by the application layer.
 
 
 General format architecture
 ===========================
 
 The format is architectured as follow
 
  - magic string
  - stream level parameters
  - payload parts (any number)
  - end of stream marker.
 
 the Binary format
 ============================
 
 All numbers are unsigned and big-endian.
 
 stream level parameters
 ------------------------
 
 Binary format is as follow
 
 :params size: (16 bits integer)
 
   The total number of Bytes used by the parameters
 
 :params value: arbitrary number of Bytes
 
   A blob of `params size` containing the serialized version of all stream level
   parameters.
 
   The blob contains a space separated list of parameters. Parameters with value
   are stored in the form `<name>=<value>`. Both name and value are urlquoted.
 
   Empty name are obviously forbidden.
 
   Name MUST start with a letter. If this first letter is lower case, the
   parameter is advisory and can be safely ignored. However when the first
   letter is capital, the parameter is mandatory and the bundling process MUST
   stop if he is not able to proceed it.
 
   Stream parameters use a simple textual format for two main reasons:
 
   - Stream level parameters should remain simple and we want to discourage any
     crazy usage.
   - Textual data allow easy human inspection of a bundle2 header in case of
     troubles.
 
   Any Applicative level options MUST go into a bundle2 part instead.
 
 Payload part
 ------------------------
 
 Binary format is as follow
 
 :header size: (16 bits inter)
 
   The total number of Bytes used by the part headers. When the header is empty
   (size = 0) this is interpreted as the end of stream marker.
 
 :header:
 
     The header defines how to interpret the part. It contains two piece of
     data: the part type, and the part parameters.
 
     The part type is used to route an application level handler, that can
     interpret payload.
 
     Part parameters are passed to the application level handler.  They are
     meant to convey information that will help the application level object to
     interpret the part payload.
 
     The binary format of the header is has follow
 
     :typesize: (one byte)
 
     :parttype: alphanumerical part name
 
     :partid: A 32bits integer (unique in the bundle) that can be used to refer
              to this part.
 
     :parameters:
 
         Part's parameter may have arbitrary content, the binary structure is::
 
             <mandatory-count><advisory-count><param-sizes><param-data>
 
         :mandatory-count: 1 byte, number of mandatory parameters
 
         :advisory-count:  1 byte, number of advisory parameters
 
         :param-sizes:
 
             N couple of bytes, where N is the total number of parameters. Each
             couple contains (<size-of-key>, <size-of-value) for one parameter.
 
         :param-data:
 
             A blob of bytes from which each parameter key and value can be
             retrieved using the list of size couples stored in the previous
             field.
 
             Mandatory parameters comes first, then the advisory ones.
 
             Each parameter's key MUST be unique within the part.
 
 :payload:
 
     payload is a series of `<chunksize><chunkdata>`.
 
     `chunksize` is a 32 bits integer, `chunkdata` are plain bytes (as much as
     `chunksize` says)` The payload part is concluded by a zero size chunk.
 
     The current implementation always produces either zero or one chunk.
     This is an implementation limitation that will ultimately be lifted.
 
 Bundle processing
 ============================
 
 Each part is processed in order using a "part handler". Handler are registered
 for a certain part type.
 
 The matching of a part to its handler is case insensitive. The case of the
 part type is used to know if a part is mandatory or advisory. If the Part type
 contains any uppercase char it is considered mandatory. When no handler is
 known for a Mandatory part, the process is aborted and an exception is raised.
 If the part is advisory and no handler is known, the part is ignored. When the
 process is aborted, the full bundle is still read from the stream to keep the
 channel usable. But none of the part read from an abort are processed. In the
 future, dropping the stream may become an option for channel we do not care to
 preserve.
 """
 
 import util
 import struct
 import urllib
 import string
 
 import changegroup, error
 from i18n import _
 
 _pack = struct.pack
 _unpack = struct.unpack
 
 _magicstring = 'HG2X'
 
 _fstreamparamsize = '>H'
 _fpartheadersize = '>H'
 _fparttypesize = '>B'
 _fpartid = '>I'
 _fpayloadsize = '>I'
 _fpartparamcount = '>BB'
 
 preferedchunksize = 4096
 
 def _makefpartparamsizes(nbparams):
     """return a struct format to read part parameter sizes
 
     The number parameters is variable so we need to build that format
     dynamically.
     """
     return '>'+('BB'*nbparams)
 
-class UnknownPartError(KeyError):
-    """error raised when no handler is found for a Mandatory part"""
+class BundleValueError(ValueError):
+    """error raised when bundle2 cannot be processed
+
+    Current main usecase is unsupported part types."""
     pass
 
 class ReadOnlyPartError(RuntimeError):
     """error raised when code tries to alter a part being generated"""
     pass
 
 parthandlermapping = {}
 
 def parthandler(parttype):
     """decorator that register a function as a bundle2 part handler
 
     eg::
 
         @parthandler('myparttype')
         def myparttypehandler(...):
             '''process a part of type "my part".'''
             ...
     """
     def _decorator(func):
         lparttype = parttype.lower() # enforce lower case matching.
         assert lparttype not in parthandlermapping
         parthandlermapping[lparttype] = func
         return func
     return _decorator
 
 class unbundlerecords(object):
     """keep record of what happens during and unbundle
 
     New records are added using `records.add('cat', obj)`. Where 'cat' is a
     category of record and obj is an arbitrary object.
 
     `records['cat']` will return all entries of this category 'cat'.
 
     Iterating on the object itself will yield `('category', obj)` tuples
     for all entries.
 
     All iterations happens in chronological order.
     """
 
     def __init__(self):
         self._categories = {}
         self._sequences = []
         self._replies = {}
 
     def add(self, category, entry, inreplyto=None):
         """add a new record of a given category.
 
         The entry can then be retrieved in the list returned by
         self['category']."""
         self._categories.setdefault(category, []).append(entry)
         self._sequences.append((category, entry))
         if inreplyto is not None:
             self.getreplies(inreplyto).add(category, entry)
 
     def getreplies(self, partid):
         """get the subrecords that replies to a specific part"""
         return self._replies.setdefault(partid, unbundlerecords())
 
     def __getitem__(self, cat):
         return tuple(self._categories.get(cat, ()))
 
     def __iter__(self):
         return iter(self._sequences)
 
     def __len__(self):
         return len(self._sequences)
 
     def __nonzero__(self):
         return bool(self._sequences)
 
 class bundleoperation(object):
     """an object that represents a single bundling process
 
     Its purpose is to carry unbundle-related objects and states.
 
     A new object should be created at the beginning of each bundle processing.
     The object is to be returned by the processing function.
 
     The object has very little content now it will ultimately contain:
     * an access to the repo the bundle is applied to,
     * a ui object,
     * a way to retrieve a transaction to add changes to the repo,
     * a way to record the result of processing each part,
     * a way to construct a bundle response when applicable.
     """
 
     def __init__(self, repo, transactiongetter):
         self.repo = repo
         self.ui = repo.ui
         self.records = unbundlerecords()
         self.gettransaction = transactiongetter
         self.reply = None
 
 class TransactionUnavailable(RuntimeError):
     pass
 
 def _notransaction():
     """default method to get a transaction while processing a bundle
 
     Raise an exception to highlight the fact that no transaction was expected
     to be created"""
     raise TransactionUnavailable()
 
 def processbundle(repo, unbundler, transactiongetter=_notransaction):
     """This function process a bundle, apply effect to/from a repo
 
     It iterates over each part then searches for and uses the proper handling
     code to process the part. Parts are processed in order.
 
     This is very early version of this function that will be strongly reworked
     before final usage.
 
     Unknown Mandatory part will abort the process.
     """
     op = bundleoperation(repo, transactiongetter)
     # todo:
     # - replace this is a init function soon.
     # - exception catching
     unbundler.params
     iterparts = unbundler.iterparts()
     part = None
     try:
         for part in iterparts:
             parttype = part.type
             # part key are matched lower case
             key = parttype.lower()
             try:
                 handler = parthandlermapping[key]
                 op.ui.debug('found a handler for part %r\n' % parttype)
             except KeyError:
                 if key != parttype: # mandatory parts
                     # todo:
                     # - use a more precise exception
-                    raise UnknownPartError(key)
+                    raise BundleValueError(key)
                 op.ui.debug('ignoring unknown advisory part %r\n' % key)
                 # consuming the part
                 part.read()
                 continue
 
             # handler is called outside the above try block so that we don't
             # risk catching KeyErrors from anything other than the
             # parthandlermapping lookup (any KeyError raised by handler()
             # itself represents a defect of a different variety).
             output = None
             if op.reply is not None:
                 op.ui.pushbuffer(error=True)
                 output = ''
             try:
                 handler(op, part)
             finally:
                 if output is not None:
                     output = op.ui.popbuffer()
             if output:
                 outpart = op.reply.newpart('b2x:output', data=output)
                 outpart.addparam('in-reply-to', str(part.id), mandatory=False)
             part.read()
     except Exception, exc:
         if part is not None:
             # consume the bundle content
             part.read()
         for part in iterparts:
             # consume the bundle content
             part.read()
         # Small hack to let caller code distinguish exceptions from bundle2
         # processing fron the ones from bundle1 processing. This is mostly
         # needed to handle different return codes to unbundle according to the
         # type of bundle. We should probably clean up or drop this return code
         # craziness in a future version.
         exc.duringunbundle2 = True
         raise
     return op
 
 def decodecaps(blob):
     """decode a bundle2 caps bytes blob into a dictionnary
 
     The blob is a list of capabilities (one per line)
     Capabilities may have values using a line of the form::
 
         capability=value1,value2,value3
 
     The values are always a list."""
     caps = {}
     for line in blob.splitlines():
         if not line:
             continue
         if '=' not in line:
             key, vals = line, ()
         else:
             key, vals = line.split('=', 1)
             vals = vals.split(',')
         key = urllib.unquote(key)
         vals = [urllib.unquote(v) for v in vals]
         caps[key] = vals
     return caps
 
 def encodecaps(caps):
     """encode a bundle2 caps dictionary into a bytes blob"""
     chunks = []
     for ca in sorted(caps):
         vals = caps[ca]
         ca = urllib.quote(ca)
         vals = [urllib.quote(v) for v in vals]
         if vals:
             ca = "%s=%s" % (ca, ','.join(vals))
         chunks.append(ca)
     return '\n'.join(chunks)
 
 class bundle20(object):
     """represent an outgoing bundle2 container
 
     Use the `addparam` method to add stream level parameter. and `newpart` to
     populate it. Then call `getchunks` to retrieve all the binary chunks of
     data that compose the bundle2 container."""
 
     def __init__(self, ui, capabilities=()):
         self.ui = ui
         self._params = []
         self._parts = []
         self.capabilities = dict(capabilities)
 
     # methods used to defines the bundle2 content
     def addparam(self, name, value=None):
         """add a stream level parameter"""
         if not name:
             raise ValueError('empty parameter name')
         if name[0] not in string.letters:
             raise ValueError('non letter first character: %r' % name)
         self._params.append((name, value))
 
     def addpart(self, part):
         """add a new part to the bundle2 container
 
         Parts contains the actual applicative payload."""
         assert part.id is None
         part.id = len(self._parts) # very cheap counter
         self._parts.append(part)
 
     def newpart(self, typeid, *args, **kwargs):
         """create a new part and add it to the containers
 
         As the part is directly added to the containers. For now, this means
         that any failure to properly initialize the part after calling
         ``newpart`` should result in a failure of the whole bundling process.
 
         You can still fall back to manually create and add if you need better
         control."""
         part = bundlepart(typeid, *args, **kwargs)
         self.addpart(part)
         return part
 
     # methods used to generate the bundle2 stream
     def getchunks(self):
         self.ui.debug('start emission of %s stream\n' % _magicstring)
         yield _magicstring
         param = self._paramchunk()
         self.ui.debug('bundle parameter: %s\n' % param)
         yield _pack(_fstreamparamsize, len(param))
         if param:
             yield param
 
         self.ui.debug('start of parts\n')
         for part in self._parts:
             self.ui.debug('bundle part: "%s"\n' % part.type)
             for chunk in part.getchunks():
                 yield chunk
         self.ui.debug('end of bundle\n')
         yield '\0\0'
 
     def _paramchunk(self):
         """return a encoded version of all stream parameters"""
         blocks = []
         for par, value in self._params:
             par = urllib.quote(par)
             if value is not None:
                 value = urllib.quote(value)
                 par = '%s=%s' % (par, value)
             blocks.append(par)
         return ' '.join(blocks)
 
 class unpackermixin(object):
     """A mixin to extract bytes and struct data from a stream"""
 
     def __init__(self, fp):
         self._fp = fp
 
     def _unpack(self, format):
         """unpack this struct format from the stream"""
         data = self._readexact(struct.calcsize(format))
         return _unpack(format, data)
 
     def _readexact(self, size):
         """read exactly <size> bytes from the stream"""
         return changegroup.readexactly(self._fp, size)
 
 
 class unbundle20(unpackermixin):
     """interpret a bundle2 stream
 
     This class is fed with a binary stream and yields parts through its
     `iterparts` methods."""
 
     def __init__(self, ui, fp, header=None):
         """If header is specified, we do not read it out of the stream."""
         self.ui = ui
         super(unbundle20, self).__init__(fp)
         if header is None:
             header = self._readexact(4)
             magic, version = header[0:2], header[2:4]
             if magic != 'HG':
                 raise util.Abort(_('not a Mercurial bundle'))
             if version != '2X':
                 raise util.Abort(_('unknown bundle version %s') % version)
         self.ui.debug('start processing of %s stream\n' % header)
 
     @util.propertycache
     def params(self):
         """dictionary of stream level parameters"""
         self.ui.debug('reading bundle2 stream parameters\n')
         params = {}
         paramssize = self._unpack(_fstreamparamsize)[0]
         if paramssize:
             for p in self._readexact(paramssize).split(' '):
                 p = p.split('=', 1)
                 p = [urllib.unquote(i) for i in p]
                 if len(p) < 2:
                     p.append(None)
                 self._processparam(*p)
                 params[p[0]] = p[1]
         return params
 
     def _processparam(self, name, value):
         """process a parameter, applying its effect if needed
 
         Parameter starting with a lower case letter are advisory and will be
         ignored when unknown.  Those starting with an upper case letter are
         mandatory and will this function will raise a KeyError when unknown.
 
         Note: no option are currently supported. Any input will be either
               ignored or failing.
         """
         if not name:
             raise ValueError('empty parameter name')
         if name[0] not in string.letters:
             raise ValueError('non letter first character: %r' % name)
         # Some logic will be later added here to try to process the option for
         # a dict of known parameter.
         if name[0].islower():
             self.ui.debug("ignoring unknown parameter %r\n" % name)
         else:
             raise KeyError(name)
 
 
     def iterparts(self):
         """yield all parts contained in the stream"""
         # make sure param have been loaded
         self.params
         self.ui.debug('start extraction of bundle2 parts\n')
         headerblock = self._readpartheader()
         while headerblock is not None:
             part = unbundlepart(self.ui, headerblock, self._fp)
             yield part
             headerblock = self._readpartheader()
         self.ui.debug('end of bundle2 stream\n')
 
     def _readpartheader(self):
         """reads a part header size and return the bytes blob
 
         returns None if empty"""
         headersize = self._unpack(_fpartheadersize)[0]
         self.ui.debug('part header size: %i\n' % headersize)
         if headersize:
             return self._readexact(headersize)
         return None
 
 
 class bundlepart(object):
     """A bundle2 part contains application level payload
 
     The part `type` is used to route the part to the application level
     handler.
 
     The part payload is contained in ``part.data``. It could be raw bytes or a
     generator of byte chunks.
 
     You can add parameters to the part using the ``addparam`` method.
     Parameters can be either mandatory (default) or advisory. Remote side
     should be able to safely ignore the advisory ones.
 
     Both data and parameters cannot be modified after the generation has begun.
     """
 
     def __init__(self, parttype, mandatoryparams=(), advisoryparams=(),
                  data=''):
         self.id = None
         self.type = parttype
         self._data = data
         self._mandatoryparams = list(mandatoryparams)
         self._advisoryparams = list(advisoryparams)
         # checking for duplicated entries
         self._seenparams = set()
         for pname, __ in self._mandatoryparams + self._advisoryparams:
             if pname in self._seenparams:
                 raise RuntimeError('duplicated params: %s' % pname)
             self._seenparams.add(pname)
         # status of the part's generation:
         # - None: not started,
         # - False: currently generated,
         # - True: generation done.
         self._generated = None
 
     # methods used to defines the part content
     def __setdata(self, data):
         if self._generated is not None:
             raise ReadOnlyPartError('part is being generated')
         self._data = data
     def __getdata(self):
         return self._data
     data = property(__getdata, __setdata)
 
     @property
     def mandatoryparams(self):
         # make it an immutable tuple to force people through ``addparam``
         return tuple(self._mandatoryparams)
 
     @property
     def advisoryparams(self):
         # make it an immutable tuple to force people through ``addparam``
         return tuple(self._advisoryparams)
 
     def addparam(self, name, value='', mandatory=True):
         if self._generated is not None:
             raise ReadOnlyPartError('part is being generated')
         if name in self._seenparams:
             raise ValueError('duplicated params: %s' % name)
         self._seenparams.add(name)
         params = self._advisoryparams
         if mandatory:
             params = self._mandatoryparams
         params.append((name, value))
 
     # methods used to generates the bundle2 stream
     def getchunks(self):
         if self._generated is not None:
             raise RuntimeError('part can only be consumed once')
         self._generated = False
         #### header
         ## parttype
         header = [_pack(_fparttypesize, len(self.type)),
                   self.type, _pack(_fpartid, self.id),
                  ]
         ## parameters
         # count
         manpar = self.mandatoryparams
         advpar = self.advisoryparams
         header.append(_pack(_fpartparamcount, len(manpar), len(advpar)))
         # size
         parsizes = []
         for key, value in manpar:
             parsizes.append(len(key))
             parsizes.append(len(value))
         for key, value in advpar:
             parsizes.append(len(key))
             parsizes.append(len(value))
         paramsizes = _pack(_makefpartparamsizes(len(parsizes) / 2), *parsizes)
         header.append(paramsizes)
         # key, value
         for key, value in manpar:
             header.append(key)
             header.append(value)
         for key, value in advpar:
             header.append(key)
             header.append(value)
         ## finalize header
         headerchunk = ''.join(header)
         yield _pack(_fpartheadersize, len(headerchunk))
         yield headerchunk
         ## payload
         for chunk in self._payloadchunks():
             yield _pack(_fpayloadsize, len(chunk))
             yield chunk
         # end of payload
         yield _pack(_fpayloadsize, 0)
         self._generated = True
 
     def _payloadchunks(self):
         """yield chunks of a the part payload
 
         Exists to handle the different methods to provide data to a part."""
         # we only support fixed size data now.
         # This will be improved in the future.
         if util.safehasattr(self.data, 'next'):
             buff = util.chunkbuffer(self.data)
             chunk = buff.read(preferedchunksize)
             while chunk:
                 yield chunk
                 chunk = buff.read(preferedchunksize)
         elif len(self.data):
             yield self.data
 
 class unbundlepart(unpackermixin):
     """a bundle part read from a bundle"""
 
     def __init__(self, ui, header, fp):
         super(unbundlepart, self).__init__(fp)
         self.ui = ui
         # unbundle state attr
         self._headerdata = header
         self._headeroffset = 0
         self._initialized = False
         self.consumed = False
         # part data
         self.id = None
         self.type = None
         self.mandatoryparams = None
         self.advisoryparams = None
         self.params = None
         self.mandatorykeys = ()
         self._payloadstream = None
         self._readheader()
 
     def _fromheader(self, size):
         """return the next <size> byte from the header"""
         offset = self._headeroffset
         data = self._headerdata[offset:(offset + size)]
         self._headeroffset = offset + size
         return data
 
     def _unpackheader(self, format):
         """read given format from header
 
         This automatically compute the size of the format to read."""
         data = self._fromheader(struct.calcsize(format))
         return _unpack(format, data)
 
     def _initparams(self, mandatoryparams, advisoryparams):
         """internal function to setup all logic related parameters"""
         # make it read only to prevent people touching it by mistake.
         self.mandatoryparams = tuple(mandatoryparams)
         self.advisoryparams  = tuple(advisoryparams)
         # user friendly UI
         self.params = dict(self.mandatoryparams)
         self.params.update(dict(self.advisoryparams))
         self.mandatorykeys = frozenset(p[0] for p in mandatoryparams)
 
     def _readheader(self):
         """read the header and setup the object"""
         typesize = self._unpackheader(_fparttypesize)[0]
         self.type = self._fromheader(typesize)
         self.ui.debug('part type: "%s"\n' % self.type)
         self.id = self._unpackheader(_fpartid)[0]
         self.ui.debug('part id: "%s"\n' % self.id)
         ## reading parameters
         # param count
         mancount, advcount = self._unpackheader(_fpartparamcount)
         self.ui.debug('part parameters: %i\n' % (mancount + advcount))
         # param size
         fparamsizes = _makefpartparamsizes(mancount + advcount)
         paramsizes = self._unpackheader(fparamsizes)
         # make it a list of couple again
         paramsizes = zip(paramsizes[::2], paramsizes[1::2])
         # split mandatory from advisory
         mansizes = paramsizes[:mancount]
         advsizes = paramsizes[mancount:]
         # retrive param value
         manparams = []
         for key, value in mansizes:
             manparams.append((self._fromheader(key), self._fromheader(value)))
         advparams = []
         for key, value in advsizes:
             advparams.append((self._fromheader(key), self._fromheader(value)))
         self._initparams(manparams, advparams)
         ## part payload
         def payloadchunks():
             payloadsize = self._unpack(_fpayloadsize)[0]
             self.ui.debug('payload chunk size: %i\n' % payloadsize)
             while payloadsize:
                 yield self._readexact(payloadsize)
                 payloadsize = self._unpack(_fpayloadsize)[0]
                 self.ui.debug('payload chunk size: %i\n' % payloadsize)
         self._payloadstream = util.chunkbuffer(payloadchunks())
         # we read the data, tell it
         self._initialized = True
 
     def read(self, size=None):
         """read payload data"""
         if not self._initialized:
             self._readheader()
         if size is None:
             data = self._payloadstream.read()
         else:
             data = self._payloadstream.read(size)
         if size is None or len(data) < size:
             self.consumed = True
         return data
 
 
 @parthandler('b2x:changegroup')
 def handlechangegroup(op, inpart):
     """apply a changegroup part on the repo
 
     This is a very early implementation that will massive rework before being
     inflicted to any end-user.
     """
     # Make sure we trigger a transaction creation
     #
     # The addchangegroup function will get a transaction object by itself, but
     # we need to make sure we trigger the creation of a transaction object used
     # for the whole processing scope.
     op.gettransaction()
     cg = changegroup.unbundle10(inpart, 'UN')
     ret = changegroup.addchangegroup(op.repo, cg, 'bundle2', 'bundle2')
     op.records.add('changegroup', {'return': ret})
     if op.reply is not None:
         # This is definitly not the final form of this
         # return. But one need to start somewhere.
         part = op.reply.newpart('b2x:reply:changegroup')
         part.addparam('in-reply-to', str(inpart.id), mandatory=False)
         part.addparam('return', '%i' % ret, mandatory=False)
     assert not inpart.read()
 
 @parthandler('b2x:reply:changegroup')
 def handlechangegroup(op, inpart):
     ret = int(inpart.params['return'])
     replyto = int(inpart.params['in-reply-to'])
     op.records.add('changegroup', {'return': ret}, replyto)
 
 @parthandler('b2x:check:heads')
 def handlechangegroup(op, inpart):
     """check that head of the repo did not change
 
     This is used to detect a push race when using unbundle.
     This replaces the "heads" argument of unbundle."""
     h = inpart.read(20)
     heads = []
     while len(h) == 20:
         heads.append(h)
         h = inpart.read(20)
     assert not h
     if heads != op.repo.heads():
         raise error.PushRaced('repository changed while pushing - '
                               'please try again')
 
 @parthandler('b2x:output')
 def handleoutput(op, inpart):
     """forward output captured on the server to the client"""
     for line in inpart.read().splitlines():
         op.ui.write(('remote: %s\n' % line))
 
 @parthandler('b2x:replycaps')
 def handlereplycaps(op, inpart):
     """Notify that a reply bundle should be created
 
     The payload contains the capabilities information for the reply"""
     caps = decodecaps(inpart.read())
     if op.reply is None:
         op.reply = bundle20(op.ui, caps)
 
 @parthandler('b2x:error:abort')
 def handlereplycaps(op, inpart):
     """Used to transmit abort error over the wire"""
     raise util.Abort(inpart.params['message'], hint=inpart.params.get('hint'))
 
 @parthandler('b2x:error:unknownpart')
 def handlereplycaps(op, inpart):
     """Used to transmit unknown part error over the wire"""
-    raise UnknownPartError(inpart.params['parttype'])
+    raise BundleValueError(inpart.params['parttype'])
 
 @parthandler('b2x:error:pushraced')
 def handlereplycaps(op, inpart):
     """Used to transmit push race error over the wire"""
     raise error.ResponseError(_('push failed:'), inpart.params['message'])

mercurial/exchange.py

@@ -1,730 +1,730 b''
 # exchange.py - utility to exchange data between repos.
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from i18n import _
 from node import hex, nullid
 import errno, urllib
 import util, scmutil, changegroup, base85, error
 import discovery, phases, obsolete, bookmarks, bundle2
 
 def readbundle(ui, fh, fname, vfs=None):
     header = changegroup.readexactly(fh, 4)
 
     alg = None
     if not fname:
         fname = "stream"
         if not header.startswith('HG') and header.startswith('\0'):
             fh = changegroup.headerlessfixup(fh, header)
             header = "HG10"
             alg = 'UN'
     elif vfs:
         fname = vfs.join(fname)
 
     magic, version = header[0:2], header[2:4]
 
     if magic != 'HG':
         raise util.Abort(_('%s: not a Mercurial bundle') % fname)
     if version == '10':
         if alg is None:
             alg = changegroup.readexactly(fh, 2)
         return changegroup.unbundle10(fh, alg)
     elif version == '2X':
         return bundle2.unbundle20(ui, fh, header=magic + version)
     else:
         raise util.Abort(_('%s: unknown bundle version %s') % (fname, version))
 
 
 class pushoperation(object):
     """A object that represent a single push operation
 
     It purpose is to carry push related state and very common operation.
 
     A new should be created at the beginning of each push and discarded
     afterward.
     """
 
     def __init__(self, repo, remote, force=False, revs=None, newbranch=False):
         # repo we push from
         self.repo = repo
         self.ui = repo.ui
         # repo we push to
         self.remote = remote
         # force option provided
         self.force = force
         # revs to be pushed (None is "all")
         self.revs = revs
         # allow push of new branch
         self.newbranch = newbranch
         # did a local lock get acquired?
         self.locallocked = None
         # Integer version of the push result
         # - None means nothing to push
         # - 0 means HTTP error
         # - 1 means we pushed and remote head count is unchanged *or*
         #   we have outgoing changesets but refused to push
         # - other values as described by addchangegroup()
         self.ret = None
         # discover.outgoing object (contains common and outgoing data)
         self.outgoing = None
         # all remote heads before the push
         self.remoteheads = None
         # testable as a boolean indicating if any nodes are missing locally.
         self.incoming = None
         # set of all heads common after changeset bundle push
         self.commonheads = None
 
 def push(repo, remote, force=False, revs=None, newbranch=False):
     '''Push outgoing changesets (limited by revs) from a local
     repository to remote. Return an integer:
       - None means nothing to push
       - 0 means HTTP error
       - 1 means we pushed and remote head count is unchanged *or*
         we have outgoing changesets but refused to push
       - other values as described by addchangegroup()
     '''
     pushop = pushoperation(repo, remote, force, revs, newbranch)
     if pushop.remote.local():
         missing = (set(pushop.repo.requirements)
                    - pushop.remote.local().supported)
         if missing:
             msg = _("required features are not"
                     " supported in the destination:"
                     " %s") % (', '.join(sorted(missing)))
             raise util.Abort(msg)
 
     # there are two ways to push to remote repo:
     #
     # addchangegroup assumes local user can lock remote
     # repo (local filesystem, old ssh servers).
     #
     # unbundle assumes local user cannot lock remote repo (new ssh
     # servers, http servers).
 
     if not pushop.remote.canpush():
         raise util.Abort(_("destination does not support push"))
     # get local lock as we might write phase data
     locallock = None
     try:
         locallock = pushop.repo.lock()
         pushop.locallocked = True
     except IOError, err:
         pushop.locallocked = False
         if err.errno != errno.EACCES:
             raise
         # source repo cannot be locked.
         # We do not abort the push, but just disable the local phase
         # synchronisation.
         msg = 'cannot lock source repository: %s\n' % err
         pushop.ui.debug(msg)
     try:
         pushop.repo.checkpush(pushop)
         lock = None
         unbundle = pushop.remote.capable('unbundle')
         if not unbundle:
             lock = pushop.remote.lock()
         try:
             _pushdiscovery(pushop)
             if _pushcheckoutgoing(pushop):
                 pushop.repo.prepushoutgoinghooks(pushop.repo,
                                                  pushop.remote,
                                                  pushop.outgoing)
                 if (pushop.repo.ui.configbool('experimental', 'bundle2-exp',
                                               False)
                     and pushop.remote.capable('bundle2-exp')):
                     _pushbundle2(pushop)
                 else:
                     _pushchangeset(pushop)
             _pushcomputecommonheads(pushop)
             _pushsyncphase(pushop)
             _pushobsolete(pushop)
         finally:
             if lock is not None:
                 lock.release()
     finally:
         if locallock is not None:
             locallock.release()
 
     _pushbookmark(pushop)
     return pushop.ret
 
 def _pushdiscovery(pushop):
     # discovery
     unfi = pushop.repo.unfiltered()
     fci = discovery.findcommonincoming
     commoninc = fci(unfi, pushop.remote, force=pushop.force)
     common, inc, remoteheads = commoninc
     fco = discovery.findcommonoutgoing
     outgoing = fco(unfi, pushop.remote, onlyheads=pushop.revs,
                    commoninc=commoninc, force=pushop.force)
     pushop.outgoing = outgoing
     pushop.remoteheads = remoteheads
     pushop.incoming = inc
 
 def _pushcheckoutgoing(pushop):
     outgoing = pushop.outgoing
     unfi = pushop.repo.unfiltered()
     if not outgoing.missing:
         # nothing to push
         scmutil.nochangesfound(unfi.ui, unfi, outgoing.excluded)
         return False
     # something to push
     if not pushop.force:
         # if repo.obsstore == False --> no obsolete
         # then, save the iteration
         if unfi.obsstore:
             # this message are here for 80 char limit reason
             mso = _("push includes obsolete changeset: %s!")
             mst = "push includes %s changeset: %s!"
             # plain versions for i18n tool to detect them
             _("push includes unstable changeset: %s!")
             _("push includes bumped changeset: %s!")
             _("push includes divergent changeset: %s!")
             # If we are to push if there is at least one
             # obsolete or unstable changeset in missing, at
             # least one of the missinghead will be obsolete or
             # unstable. So checking heads only is ok
             for node in outgoing.missingheads:
                 ctx = unfi[node]
                 if ctx.obsolete():
                     raise util.Abort(mso % ctx)
                 elif ctx.troubled():
                     raise util.Abort(_(mst)
                                      % (ctx.troubles()[0],
                                         ctx))
         newbm = pushop.ui.configlist('bookmarks', 'pushing')
         discovery.checkheads(unfi, pushop.remote, outgoing,
                              pushop.remoteheads,
                              pushop.newbranch,
                              bool(pushop.incoming),
                              newbm)
     return True
 
 def _pushbundle2(pushop):
     """push data to the remote using bundle2
 
     The only currently supported type of data is changegroup but this will
     evolve in the future."""
     # Send known head to the server for race detection.
     capsblob = urllib.unquote(pushop.remote.capable('bundle2-exp'))
     caps = bundle2.decodecaps(capsblob)
     bundler = bundle2.bundle20(pushop.ui, caps)
     # create reply capability
     capsblob = bundle2.encodecaps(pushop.repo.bundle2caps)
     bundler.newpart('b2x:replycaps', data=capsblob)
     if not pushop.force:
         bundler.newpart('B2X:CHECK:HEADS', data=iter(pushop.remoteheads))
     extrainfo = _pushbundle2extraparts(pushop, bundler)
     # add the changegroup bundle
     cg = changegroup.getlocalbundle(pushop.repo, 'push', pushop.outgoing)
     cgpart = bundler.newpart('B2X:CHANGEGROUP', data=cg.getchunks())
     stream = util.chunkbuffer(bundler.getchunks())
     try:
         reply = pushop.remote.unbundle(stream, ['force'], 'push')
-    except bundle2.UnknownPartError, exc:
+    except bundle2.BundleValueError, exc:
         raise util.Abort('missing support for %s' % exc)
     try:
         op = bundle2.processbundle(pushop.repo, reply)
-    except bundle2.UnknownPartError, exc:
+    except bundle2.BundleValueError, exc:
         raise util.Abort('missing support for %s' % exc)
     cgreplies = op.records.getreplies(cgpart.id)
     assert len(cgreplies['changegroup']) == 1
     pushop.ret = cgreplies['changegroup'][0]['return']
     _pushbundle2extrareply(pushop, op, extrainfo)
 
 def _pushbundle2extraparts(pushop, bundler):
     """hook function to let extensions add parts
 
     Return a dict to let extensions pass data to the reply processing.
     """
     return {}
 
 def _pushbundle2extrareply(pushop, op, extrainfo):
     """hook function to let extensions react to part replies
 
     The dict from _pushbundle2extrareply is fed to this function.
     """
     pass
 
 def _pushchangeset(pushop):
     """Make the actual push of changeset bundle to remote repo"""
     outgoing = pushop.outgoing
     unbundle = pushop.remote.capable('unbundle')
     # TODO: get bundlecaps from remote
     bundlecaps = None
     # create a changegroup from local
     if pushop.revs is None and not (outgoing.excluded
                             or pushop.repo.changelog.filteredrevs):
         # push everything,
         # use the fast path, no race possible on push
         bundler = changegroup.bundle10(pushop.repo, bundlecaps)
         cg = changegroup.getsubset(pushop.repo,
                                    outgoing,
                                    bundler,
                                    'push',
                                    fastpath=True)
     else:
         cg = changegroup.getlocalbundle(pushop.repo, 'push', outgoing,
                                         bundlecaps)
 
     # apply changegroup to remote
     if unbundle:
         # local repo finds heads on server, finds out what
         # revs it must push. once revs transferred, if server
         # finds it has different heads (someone else won
         # commit/push race), server aborts.
         if pushop.force:
             remoteheads = ['force']
         else:
             remoteheads = pushop.remoteheads
         # ssh: return remote's addchangegroup()
         # http: return remote's addchangegroup() or 0 for error
         pushop.ret = pushop.remote.unbundle(cg, remoteheads,
                                             'push')
     else:
         # we return an integer indicating remote head count
         # change
         pushop.ret = pushop.remote.addchangegroup(cg, 'push', pushop.repo.url())
 
 def _pushcomputecommonheads(pushop):
     unfi = pushop.repo.unfiltered()
     if pushop.ret:
         # push succeed, synchronize target of the push
         cheads = pushop.outgoing.missingheads
     elif pushop.revs is None:
         # All out push fails. synchronize all common
         cheads = pushop.outgoing.commonheads
     else:
         # I want cheads = heads(::missingheads and ::commonheads)
         # (missingheads is revs with secret changeset filtered out)
         #
         # This can be expressed as:
         #     cheads = ( (missingheads and ::commonheads)
         #              + (commonheads and ::missingheads))"
         #              )
         #
         # while trying to push we already computed the following:
         #     common = (::commonheads)
         #     missing = ((commonheads::missingheads) - commonheads)
         #
         # We can pick:
         # * missingheads part of common (::commonheads)
         common = set(pushop.outgoing.common)
         nm = pushop.repo.changelog.nodemap
         cheads = [node for node in pushop.revs if nm[node] in common]
         # and
         # * commonheads parents on missing
         revset = unfi.set('%ln and parents(roots(%ln))',
                          pushop.outgoing.commonheads,
                          pushop.outgoing.missing)
         cheads.extend(c.node() for c in revset)
     pushop.commonheads = cheads
 
 def _pushsyncphase(pushop):
     """synchronise phase information locally and remotely"""
     unfi = pushop.repo.unfiltered()
     cheads = pushop.commonheads
     # even when we don't push, exchanging phase data is useful
     remotephases = pushop.remote.listkeys('phases')
     if (pushop.ui.configbool('ui', '_usedassubrepo', False)
         and remotephases    # server supports phases
         and pushop.ret is None # nothing was pushed
         and remotephases.get('publishing', False)):
         # When:
         # - this is a subrepo push
         # - and remote support phase
         # - and no changeset was pushed
         # - and remote is publishing
         # We may be in issue 3871 case!
         # We drop the possible phase synchronisation done by
         # courtesy to publish changesets possibly locally draft
         # on the remote.
         remotephases = {'publishing': 'True'}
     if not remotephases: # old server or public only reply from non-publishing
         _localphasemove(pushop, cheads)
         # don't push any phase data as there is nothing to push
     else:
         ana = phases.analyzeremotephases(pushop.repo, cheads,
                                          remotephases)
         pheads, droots = ana
         ### Apply remote phase on local
         if remotephases.get('publishing', False):
             _localphasemove(pushop, cheads)
         else: # publish = False
             _localphasemove(pushop, pheads)
             _localphasemove(pushop, cheads, phases.draft)
         ### Apply local phase on remote
 
         # Get the list of all revs draft on remote by public here.
         # XXX Beware that revset break if droots is not strictly
         # XXX root we may want to ensure it is but it is costly
         outdated =  unfi.set('heads((%ln::%ln) and public())',
                              droots, cheads)
         for newremotehead in outdated:
             r = pushop.remote.pushkey('phases',
                                       newremotehead.hex(),
                                       str(phases.draft),
                                       str(phases.public))
             if not r:
                 pushop.ui.warn(_('updating %s to public failed!\n')
                                        % newremotehead)
 
 def _localphasemove(pushop, nodes, phase=phases.public):
     """move <nodes> to <phase> in the local source repo"""
     if pushop.locallocked:
         phases.advanceboundary(pushop.repo, phase, nodes)
     else:
         # repo is not locked, do not change any phases!
         # Informs the user that phases should have been moved when
         # applicable.
         actualmoves = [n for n in nodes if phase < pushop.repo[n].phase()]
         phasestr = phases.phasenames[phase]
         if actualmoves:
             pushop.ui.status(_('cannot lock source repo, skipping '
                                'local %s phase update\n') % phasestr)
 
 def _pushobsolete(pushop):
     """utility function to push obsolete markers to a remote"""
     pushop.ui.debug('try to push obsolete markers to remote\n')
     repo = pushop.repo
     remote = pushop.remote
     if (obsolete._enabled and repo.obsstore and
         'obsolete' in remote.listkeys('namespaces')):
         rslts = []
         remotedata = repo.listkeys('obsolete')
         for key in sorted(remotedata, reverse=True):
             # reverse sort to ensure we end with dump0
             data = remotedata[key]
             rslts.append(remote.pushkey('obsolete', key, '', data))
         if [r for r in rslts if not r]:
             msg = _('failed to push some obsolete markers!\n')
             repo.ui.warn(msg)
 
 def _pushbookmark(pushop):
     """Update bookmark position on remote"""
     ui = pushop.ui
     repo = pushop.repo.unfiltered()
     remote = pushop.remote
     ui.debug("checking for updated bookmarks\n")
     revnums = map(repo.changelog.rev, pushop.revs or [])
     ancestors = [a for a in repo.changelog.ancestors(revnums, inclusive=True)]
     (addsrc, adddst, advsrc, advdst, diverge, differ, invalid
      ) = bookmarks.compare(repo, repo._bookmarks, remote.listkeys('bookmarks'),
                            srchex=hex)
 
     for b, scid, dcid in advsrc:
         if ancestors and repo[scid].rev() not in ancestors:
             continue
         if remote.pushkey('bookmarks', b, dcid, scid):
             ui.status(_("updating bookmark %s\n") % b)
         else:
             ui.warn(_('updating bookmark %s failed!\n') % b)
 
 class pulloperation(object):
     """A object that represent a single pull operation
 
     It purpose is to carry push related state and very common operation.
 
     A new should be created at the beginning of each pull and discarded
     afterward.
     """
 
     def __init__(self, repo, remote, heads=None, force=False):
         # repo we pull into
         self.repo = repo
         # repo we pull from
         self.remote = remote
         # revision we try to pull (None is "all")
         self.heads = heads
         # do we force pull?
         self.force = force
         # the name the pull transaction
         self._trname = 'pull\n' + util.hidepassword(remote.url())
         # hold the transaction once created
         self._tr = None
         # set of common changeset between local and remote before pull
         self.common = None
         # set of pulled head
         self.rheads = None
         # list of missing changeset to fetch remotely
         self.fetch = None
         # result of changegroup pulling (used as return code by pull)
         self.cgresult = None
         # list of step remaining todo (related to future bundle2 usage)
         self.todosteps = set(['changegroup', 'phases', 'obsmarkers'])
 
     @util.propertycache
     def pulledsubset(self):
         """heads of the set of changeset target by the pull"""
         # compute target subset
         if self.heads is None:
             # We pulled every thing possible
             # sync on everything common
             c = set(self.common)
             ret = list(self.common)
             for n in self.rheads:
                 if n not in c:
                     ret.append(n)
             return ret
         else:
             # We pulled a specific subset
             # sync on this subset
             return self.heads
 
     def gettransaction(self):
         """get appropriate pull transaction, creating it if needed"""
         if self._tr is None:
             self._tr = self.repo.transaction(self._trname)
         return self._tr
 
     def closetransaction(self):
         """close transaction if created"""
         if self._tr is not None:
             self._tr.close()
 
     def releasetransaction(self):
         """release transaction if created"""
         if self._tr is not None:
             self._tr.release()
 
 def pull(repo, remote, heads=None, force=False):
     pullop = pulloperation(repo, remote, heads, force)
     if pullop.remote.local():
         missing = set(pullop.remote.requirements) - pullop.repo.supported
         if missing:
             msg = _("required features are not"
                     " supported in the destination:"
                     " %s") % (', '.join(sorted(missing)))
             raise util.Abort(msg)
 
     lock = pullop.repo.lock()
     try:
         _pulldiscovery(pullop)
         if (pullop.repo.ui.configbool('experimental', 'bundle2-exp', False)
             and pullop.remote.capable('bundle2-exp')):
             _pullbundle2(pullop)
         if 'changegroup' in pullop.todosteps:
             _pullchangeset(pullop)
         if 'phases' in pullop.todosteps:
             _pullphase(pullop)
         if 'obsmarkers' in pullop.todosteps:
             _pullobsolete(pullop)
         pullop.closetransaction()
     finally:
         pullop.releasetransaction()
         lock.release()
 
     return pullop.cgresult
 
 def _pulldiscovery(pullop):
     """discovery phase for the pull
 
     Current handle changeset discovery only, will change handle all discovery
     at some point."""
     tmp = discovery.findcommonincoming(pullop.repo.unfiltered(),
                                        pullop.remote,
                                        heads=pullop.heads,
                                        force=pullop.force)
     pullop.common, pullop.fetch, pullop.rheads = tmp
 
 def _pullbundle2(pullop):
     """pull data using bundle2
 
     For now, the only supported data are changegroup."""
     kwargs = {'bundlecaps': set(['HG2X'])}
     capsblob = bundle2.encodecaps(pullop.repo.bundle2caps)
     kwargs['bundlecaps'].add('bundle2=' + urllib.quote(capsblob))
     # pulling changegroup
     pullop.todosteps.remove('changegroup')
 
     kwargs['common'] = pullop.common
     kwargs['heads'] = pullop.heads or pullop.rheads
     if not pullop.fetch:
         pullop.repo.ui.status(_("no changes found\n"))
         pullop.cgresult = 0
     else:
         if pullop.heads is None and list(pullop.common) == [nullid]:
             pullop.repo.ui.status(_("requesting all changes\n"))
     _pullbundle2extraprepare(pullop, kwargs)
     if kwargs.keys() == ['format']:
         return # nothing to pull
     bundle = pullop.remote.getbundle('pull', **kwargs)
     try:
         op = bundle2.processbundle(pullop.repo, bundle, pullop.gettransaction)
-    except bundle2.UnknownPartError, exc:
+    except bundle2.BundleValueError, exc:
         raise util.Abort('missing support for %s' % exc)
 
     if pullop.fetch:
         assert len(op.records['changegroup']) == 1
         pullop.cgresult = op.records['changegroup'][0]['return']
 
 def _pullbundle2extraprepare(pullop, kwargs):
     """hook function so that extensions can extend the getbundle call"""
     pass
 
 def _pullchangeset(pullop):
     """pull changeset from unbundle into the local repo"""
     # We delay the open of the transaction as late as possible so we
     # don't open transaction for nothing or you break future useful
     # rollback call
     pullop.todosteps.remove('changegroup')
     if not pullop.fetch:
             pullop.repo.ui.status(_("no changes found\n"))
             pullop.cgresult = 0
             return
     pullop.gettransaction()
     if pullop.heads is None and list(pullop.common) == [nullid]:
         pullop.repo.ui.status(_("requesting all changes\n"))
     elif pullop.heads is None and pullop.remote.capable('changegroupsubset'):
         # issue1320, avoid a race if remote changed after discovery
         pullop.heads = pullop.rheads
 
     if pullop.remote.capable('getbundle'):
         # TODO: get bundlecaps from remote
         cg = pullop.remote.getbundle('pull', common=pullop.common,
                                      heads=pullop.heads or pullop.rheads)
     elif pullop.heads is None:
         cg = pullop.remote.changegroup(pullop.fetch, 'pull')
     elif not pullop.remote.capable('changegroupsubset'):
         raise util.Abort(_("partial pull cannot be done because "
                            "other repository doesn't support "
                            "changegroupsubset."))
     else:
         cg = pullop.remote.changegroupsubset(pullop.fetch, pullop.heads, 'pull')
     pullop.cgresult = changegroup.addchangegroup(pullop.repo, cg, 'pull',
                                                  pullop.remote.url())
 
 def _pullphase(pullop):
     # Get remote phases data from remote
     pullop.todosteps.remove('phases')
     remotephases = pullop.remote.listkeys('phases')
     publishing = bool(remotephases.get('publishing', False))
     if remotephases and not publishing:
         # remote is new and unpublishing
         pheads, _dr = phases.analyzeremotephases(pullop.repo,
                                                  pullop.pulledsubset,
                                                  remotephases)
         phases.advanceboundary(pullop.repo, phases.public, pheads)
         phases.advanceboundary(pullop.repo, phases.draft,
                                pullop.pulledsubset)
     else:
         # Remote is old or publishing all common changesets
         # should be seen as public
         phases.advanceboundary(pullop.repo, phases.public,
                                pullop.pulledsubset)
 
 def _pullobsolete(pullop):
     """utility function to pull obsolete markers from a remote
 
     The `gettransaction` is function that return the pull transaction, creating
     one if necessary. We return the transaction to inform the calling code that
     a new transaction have been created (when applicable).
 
     Exists mostly to allow overriding for experimentation purpose"""
     pullop.todosteps.remove('obsmarkers')
     tr = None
     if obsolete._enabled:
         pullop.repo.ui.debug('fetching remote obsolete markers\n')
         remoteobs = pullop.remote.listkeys('obsolete')
         if 'dump0' in remoteobs:
             tr = pullop.gettransaction()
             for key in sorted(remoteobs, reverse=True):
                 if key.startswith('dump'):
                     data = base85.b85decode(remoteobs[key])
                     pullop.repo.obsstore.mergemarkers(tr, data)
             pullop.repo.invalidatevolatilesets()
     return tr
 
 def getbundle(repo, source, heads=None, common=None, bundlecaps=None,
               **kwargs):
     """return a full bundle (with potentially multiple kind of parts)
 
     Could be a bundle HG10 or a bundle HG2X depending on bundlecaps
     passed. For now, the bundle can contain only changegroup, but this will
     changes when more part type will be available for bundle2.
 
     This is different from changegroup.getbundle that only returns an HG10
     changegroup bundle. They may eventually get reunited in the future when we
     have a clearer idea of the API we what to query different data.
 
     The implementation is at a very early stage and will get massive rework
     when the API of bundle is refined.
     """
     # build changegroup bundle here.
     cg = changegroup.getbundle(repo, source, heads=heads,
                                common=common, bundlecaps=bundlecaps)
     if bundlecaps is None or 'HG2X' not in bundlecaps:
         return cg
     # very crude first implementation,
     # the bundle API will change and the generation will be done lazily.
     b2caps = {}
     for bcaps in bundlecaps:
         if bcaps.startswith('bundle2='):
             blob = urllib.unquote(bcaps[len('bundle2='):])
             b2caps.update(bundle2.decodecaps(blob))
     bundler = bundle2.bundle20(repo.ui, b2caps)
     if cg:
         bundler.newpart('b2x:changegroup', data=cg.getchunks())
     _getbundleextrapart(bundler, repo, source, heads=heads, common=common,
                         bundlecaps=bundlecaps, **kwargs)
     return util.chunkbuffer(bundler.getchunks())
 
 def _getbundleextrapart(bundler, repo, source, heads=None, common=None,
                         bundlecaps=None, **kwargs):
     """hook function to let extensions add parts to the requested bundle"""
     pass
 
 def check_heads(repo, their_heads, context):
     """check if the heads of a repo have been modified
 
     Used by peer for unbundling.
     """
     heads = repo.heads()
     heads_hash = util.sha1(''.join(sorted(heads))).digest()
     if not (their_heads == ['force'] or their_heads == heads or
             their_heads == ['hashed', heads_hash]):
         # someone else committed/pushed/unbundled while we
         # were transferring data
         raise error.PushRaced('repository changed while %s - '
                               'please try again' % context)
 
 def unbundle(repo, cg, heads, source, url):
     """Apply a bundle to a repo.
 
     this function makes sure the repo is locked during the application and have
     mechanism to check that no push race occurred between the creation of the
     bundle and its application.
 
     If the push was raced as PushRaced exception is raised."""
     r = 0
     # need a transaction when processing a bundle2 stream
     tr = None
     lock = repo.lock()
     try:
         check_heads(repo, heads, 'uploading changes')
         # push can proceed
         if util.safehasattr(cg, 'params'):
             try:
                 tr = repo.transaction('unbundle')
                 tr.hookargs['bundle2-exp'] = '1'
                 r = bundle2.processbundle(repo, cg, lambda: tr).reply
                 cl = repo.unfiltered().changelog
                 p = cl.writepending() and repo.root or ""
                 repo.hook('b2x-pretransactionclose', throw=True, source=source,
                           url=url, pending=p, **tr.hookargs)
                 tr.close()
                 repo.hook('b2x-transactionclose', source=source, url=url,
                           **tr.hookargs)
             except Exception, exc:
                 exc.duringunbundle2 = True
                 raise
         else:
             r = changegroup.addchangegroup(repo, cg, source, url)
     finally:
         if tr is not None:
             tr.release()
         lock.release()
     return r

mercurial/wireproto.py

@@ -1,833 +1,833 b''
 # wireproto.py - generic wire protocol support functions
 #
 # Copyright 2005-2010 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 import urllib, tempfile, os, sys
 from i18n import _
 from node import bin, hex
 import changegroup as changegroupmod, bundle2
 import peer, error, encoding, util, store, exchange
 
 
 class abstractserverproto(object):
     """abstract class that summarizes the protocol API
 
     Used as reference and documentation.
     """
 
     def getargs(self, args):
         """return the value for arguments in <args>
 
         returns a list of values (same order as <args>)"""
         raise NotImplementedError()
 
     def getfile(self, fp):
         """write the whole content of a file into a file like object
 
         The file is in the form::
 
             (<chunk-size>\n<chunk>)+0\n
 
         chunk size is the ascii version of the int.
         """
         raise NotImplementedError()
 
     def redirect(self):
         """may setup interception for stdout and stderr
 
         See also the `restore` method."""
         raise NotImplementedError()
 
     # If the `redirect` function does install interception, the `restore`
     # function MUST be defined. If interception is not used, this function
     # MUST NOT be defined.
     #
     # left commented here on purpose
     #
     #def restore(self):
     #    """reinstall previous stdout and stderr and return intercepted stdout
     #    """
     #    raise NotImplementedError()
 
     def groupchunks(self, cg):
         """return 4096 chunks from a changegroup object
 
         Some protocols may have compressed the contents."""
         raise NotImplementedError()
 
 # abstract batching support
 
 class future(object):
     '''placeholder for a value to be set later'''
     def set(self, value):
         if util.safehasattr(self, 'value'):
             raise error.RepoError("future is already set")
         self.value = value
 
 class batcher(object):
     '''base class for batches of commands submittable in a single request
 
     All methods invoked on instances of this class are simply queued and
     return a a future for the result. Once you call submit(), all the queued
     calls are performed and the results set in their respective futures.
     '''
     def __init__(self):
         self.calls = []
     def __getattr__(self, name):
         def call(*args, **opts):
             resref = future()
             self.calls.append((name, args, opts, resref,))
             return resref
         return call
     def submit(self):
         pass
 
 class localbatch(batcher):
     '''performs the queued calls directly'''
     def __init__(self, local):
         batcher.__init__(self)
         self.local = local
     def submit(self):
         for name, args, opts, resref in self.calls:
             resref.set(getattr(self.local, name)(*args, **opts))
 
 class remotebatch(batcher):
     '''batches the queued calls; uses as few roundtrips as possible'''
     def __init__(self, remote):
         '''remote must support _submitbatch(encbatch) and
         _submitone(op, encargs)'''
         batcher.__init__(self)
         self.remote = remote
     def submit(self):
         req, rsp = [], []
         for name, args, opts, resref in self.calls:
             mtd = getattr(self.remote, name)
             batchablefn = getattr(mtd, 'batchable', None)
             if batchablefn is not None:
                 batchable = batchablefn(mtd.im_self, *args, **opts)
                 encargsorres, encresref = batchable.next()
                 if encresref:
                     req.append((name, encargsorres,))
                     rsp.append((batchable, encresref, resref,))
                 else:
                     resref.set(encargsorres)
             else:
                 if req:
                     self._submitreq(req, rsp)
                     req, rsp = [], []
                 resref.set(mtd(*args, **opts))
         if req:
             self._submitreq(req, rsp)
     def _submitreq(self, req, rsp):
         encresults = self.remote._submitbatch(req)
         for encres, r in zip(encresults, rsp):
             batchable, encresref, resref = r
             encresref.set(encres)
             resref.set(batchable.next())
 
 def batchable(f):
     '''annotation for batchable methods
 
     Such methods must implement a coroutine as follows:
 
     @batchable
     def sample(self, one, two=None):
         # Handle locally computable results first:
         if not one:
             yield "a local result", None
         # Build list of encoded arguments suitable for your wire protocol:
         encargs = [('one', encode(one),), ('two', encode(two),)]
         # Create future for injection of encoded result:
         encresref = future()
         # Return encoded arguments and future:
         yield encargs, encresref
         # Assuming the future to be filled with the result from the batched
         # request now. Decode it:
         yield decode(encresref.value)
 
     The decorator returns a function which wraps this coroutine as a plain
     method, but adds the original method as an attribute called "batchable",
     which is used by remotebatch to split the call into separate encoding and
     decoding phases.
     '''
     def plain(*args, **opts):
         batchable = f(*args, **opts)
         encargsorres, encresref = batchable.next()
         if not encresref:
             return encargsorres # a local result in this case
         self = args[0]
         encresref.set(self._submitone(f.func_name, encargsorres))
         return batchable.next()
     setattr(plain, 'batchable', f)
     return plain
 
 # list of nodes encoding / decoding
 
 def decodelist(l, sep=' '):
     if l:
         return map(bin, l.split(sep))
     return []
 
 def encodelist(l, sep=' '):
     return sep.join(map(hex, l))
 
 # batched call argument encoding
 
 def escapearg(plain):
     return (plain
             .replace(':', '::')
             .replace(',', ':,')
             .replace(';', ':;')
             .replace('=', ':='))
 
 def unescapearg(escaped):
     return (escaped
             .replace(':=', '=')
             .replace(':;', ';')
             .replace(':,', ',')
             .replace('::', ':'))
 
 # client side
 
 class wirepeer(peer.peerrepository):
 
     def batch(self):
         return remotebatch(self)
     def _submitbatch(self, req):
         cmds = []
         for op, argsdict in req:
             args = ','.join('%s=%s' % p for p in argsdict.iteritems())
             cmds.append('%s %s' % (op, args))
         rsp = self._call("batch", cmds=';'.join(cmds))
         return rsp.split(';')
     def _submitone(self, op, args):
         return self._call(op, **args)
 
     @batchable
     def lookup(self, key):
         self.requirecap('lookup', _('look up remote revision'))
         f = future()
         yield {'key': encoding.fromlocal(key)}, f
         d = f.value
         success, data = d[:-1].split(" ", 1)
         if int(success):
             yield bin(data)
         self._abort(error.RepoError(data))
 
     @batchable
     def heads(self):
         f = future()
         yield {}, f
         d = f.value
         try:
             yield decodelist(d[:-1])
         except ValueError:
             self._abort(error.ResponseError(_("unexpected response:"), d))
 
     @batchable
     def known(self, nodes):
         f = future()
         yield {'nodes': encodelist(nodes)}, f
         d = f.value
         try:
             yield [bool(int(f)) for f in d]
         except ValueError:
             self._abort(error.ResponseError(_("unexpected response:"), d))
 
     @batchable
     def branchmap(self):
         f = future()
         yield {}, f
         d = f.value
         try:
             branchmap = {}
             for branchpart in d.splitlines():
                 branchname, branchheads = branchpart.split(' ', 1)
                 branchname = encoding.tolocal(urllib.unquote(branchname))
                 branchheads = decodelist(branchheads)
                 branchmap[branchname] = branchheads
             yield branchmap
         except TypeError:
             self._abort(error.ResponseError(_("unexpected response:"), d))
 
     def branches(self, nodes):
         n = encodelist(nodes)
         d = self._call("branches", nodes=n)
         try:
             br = [tuple(decodelist(b)) for b in d.splitlines()]
             return br
         except ValueError:
             self._abort(error.ResponseError(_("unexpected response:"), d))
 
     def between(self, pairs):
         batch = 8 # avoid giant requests
         r = []
         for i in xrange(0, len(pairs), batch):
             n = " ".join([encodelist(p, '-') for p in pairs[i:i + batch]])
             d = self._call("between", pairs=n)
             try:
                 r.extend(l and decodelist(l) or [] for l in d.splitlines())
             except ValueError:
                 self._abort(error.ResponseError(_("unexpected response:"), d))
         return r
 
     @batchable
     def pushkey(self, namespace, key, old, new):
         if not self.capable('pushkey'):
             yield False, None
         f = future()
         self.ui.debug('preparing pushkey for "%s:%s"\n' % (namespace, key))
         yield {'namespace': encoding.fromlocal(namespace),
                'key': encoding.fromlocal(key),
                'old': encoding.fromlocal(old),
                'new': encoding.fromlocal(new)}, f
         d = f.value
         d, output = d.split('\n', 1)
         try:
             d = bool(int(d))
         except ValueError:
             raise error.ResponseError(
                 _('push failed (unexpected response):'), d)
         for l in output.splitlines(True):
             self.ui.status(_('remote: '), l)
         yield d
 
     @batchable
     def listkeys(self, namespace):
         if not self.capable('pushkey'):
             yield {}, None
         f = future()
         self.ui.debug('preparing listkeys for "%s"\n' % namespace)
         yield {'namespace': encoding.fromlocal(namespace)}, f
         d = f.value
         r = {}
         for l in d.splitlines():
             k, v = l.split('\t')
             r[encoding.tolocal(k)] = encoding.tolocal(v)
         yield r
 
     def stream_out(self):
         return self._callstream('stream_out')
 
     def changegroup(self, nodes, kind):
         n = encodelist(nodes)
         f = self._callcompressable("changegroup", roots=n)
         return changegroupmod.unbundle10(f, 'UN')
 
     def changegroupsubset(self, bases, heads, kind):
         self.requirecap('changegroupsubset', _('look up remote changes'))
         bases = encodelist(bases)
         heads = encodelist(heads)
         f = self._callcompressable("changegroupsubset",
                                    bases=bases, heads=heads)
         return changegroupmod.unbundle10(f, 'UN')
 
     def getbundle(self, source, heads=None, common=None, bundlecaps=None,
                   **kwargs):
         self.requirecap('getbundle', _('look up remote changes'))
         opts = {}
         if heads is not None:
             opts['heads'] = encodelist(heads)
         if common is not None:
             opts['common'] = encodelist(common)
         if bundlecaps is not None:
             opts['bundlecaps'] = ','.join(bundlecaps)
         opts.update(kwargs)
         f = self._callcompressable("getbundle", **opts)
         if bundlecaps is not None and 'HG2X' in bundlecaps:
             return bundle2.unbundle20(self.ui, f)
         else:
             return changegroupmod.unbundle10(f, 'UN')
 
     def unbundle(self, cg, heads, source):
         '''Send cg (a readable file-like object representing the
         changegroup to push, typically a chunkbuffer object) to the
         remote server as a bundle.
 
         When pushing a bundle10 stream, return an integer indicating the
         result of the push (see localrepository.addchangegroup()).
 
         When pushing a bundle20 stream, return a bundle20 stream.'''
 
         if heads != ['force'] and self.capable('unbundlehash'):
             heads = encodelist(['hashed',
                                 util.sha1(''.join(sorted(heads))).digest()])
         else:
             heads = encodelist(heads)
 
         if util.safehasattr(cg, 'deltaheader'):
             # this a bundle10, do the old style call sequence
             ret, output = self._callpush("unbundle", cg, heads=heads)
             if ret == "":
                 raise error.ResponseError(
                     _('push failed:'), output)
             try:
                 ret = int(ret)
             except ValueError:
                 raise error.ResponseError(
                     _('push failed (unexpected response):'), ret)
 
             for l in output.splitlines(True):
                 self.ui.status(_('remote: '), l)
         else:
             # bundle2 push. Send a stream, fetch a stream.
             stream = self._calltwowaystream('unbundle', cg, heads=heads)
             ret = bundle2.unbundle20(self.ui, stream)
         return ret
 
     def debugwireargs(self, one, two, three=None, four=None, five=None):
         # don't pass optional arguments left at their default value
         opts = {}
         if three is not None:
             opts['three'] = three
         if four is not None:
             opts['four'] = four
         return self._call('debugwireargs', one=one, two=two, **opts)
 
     def _call(self, cmd, **args):
         """execute <cmd> on the server
 
         The command is expected to return a simple string.
 
         returns the server reply as a string."""
         raise NotImplementedError()
 
     def _callstream(self, cmd, **args):
         """execute <cmd> on the server
 
         The command is expected to return a stream.
 
         returns the server reply as a file like object."""
         raise NotImplementedError()
 
     def _callcompressable(self, cmd, **args):
         """execute <cmd> on the server
 
         The command is expected to return a stream.
 
         The stream may have been compressed in some implementations. This
         function takes care of the decompression. This is the only difference
         with _callstream.
 
         returns the server reply as a file like object.
         """
         raise NotImplementedError()
 
     def _callpush(self, cmd, fp, **args):
         """execute a <cmd> on server
 
         The command is expected to be related to a push. Push has a special
         return method.
 
         returns the server reply as a (ret, output) tuple. ret is either
         empty (error) or a stringified int.
         """
         raise NotImplementedError()
 
     def _calltwowaystream(self, cmd, fp, **args):
         """execute <cmd> on server
 
         The command will send a stream to the server and get a stream in reply.
         """
         raise NotImplementedError()
 
     def _abort(self, exception):
         """clearly abort the wire protocol connection and raise the exception
         """
         raise NotImplementedError()
 
 # server side
 
 # wire protocol command can either return a string or one of these classes.
 class streamres(object):
     """wireproto reply: binary stream
 
     The call was successful and the result is a stream.
     Iterate on the `self.gen` attribute to retrieve chunks.
     """
     def __init__(self, gen):
         self.gen = gen
 
 class pushres(object):
     """wireproto reply: success with simple integer return
 
     The call was successful and returned an integer contained in `self.res`.
     """
     def __init__(self, res):
         self.res = res
 
 class pusherr(object):
     """wireproto reply: failure
 
     The call failed. The `self.res` attribute contains the error message.
     """
     def __init__(self, res):
         self.res = res
 
 class ooberror(object):
     """wireproto reply: failure of a batch of operation
 
     Something failed during a batch call. The error message is stored in
     `self.message`.
     """
     def __init__(self, message):
         self.message = message
 
 def dispatch(repo, proto, command):
     repo = repo.filtered("served")
     func, spec = commands[command]
     args = proto.getargs(spec)
     return func(repo, proto, *args)
 
 def options(cmd, keys, others):
     opts = {}
     for k in keys:
         if k in others:
             opts[k] = others[k]
             del others[k]
     if others:
         sys.stderr.write("abort: %s got unexpected arguments %s\n"
                          % (cmd, ",".join(others)))
     return opts
 
 # list of commands
 commands = {}
 
 def wireprotocommand(name, args=''):
     """decorator for wire protocol command"""
     def register(func):
         commands[name] = (func, args)
         return func
     return register
 
 @wireprotocommand('batch', 'cmds *')
 def batch(repo, proto, cmds, others):
     repo = repo.filtered("served")
     res = []
     for pair in cmds.split(';'):
         op, args = pair.split(' ', 1)
         vals = {}
         for a in args.split(','):
             if a:
                 n, v = a.split('=')
                 vals[n] = unescapearg(v)
         func, spec = commands[op]
         if spec:
             keys = spec.split()
             data = {}
             for k in keys:
                 if k == '*':
                     star = {}
                     for key in vals.keys():
                         if key not in keys:
                             star[key] = vals[key]
                     data['*'] = star
                 else:
                     data[k] = vals[k]
             result = func(repo, proto, *[data[k] for k in keys])
         else:
             result = func(repo, proto)
         if isinstance(result, ooberror):
             return result
         res.append(escapearg(result))
     return ';'.join(res)
 
 @wireprotocommand('between', 'pairs')
 def between(repo, proto, pairs):
     pairs = [decodelist(p, '-') for p in pairs.split(" ")]
     r = []
     for b in repo.between(pairs):
         r.append(encodelist(b) + "\n")
     return "".join(r)
 
 @wireprotocommand('branchmap')
 def branchmap(repo, proto):
     branchmap = repo.branchmap()
     heads = []
     for branch, nodes in branchmap.iteritems():
         branchname = urllib.quote(encoding.fromlocal(branch))
         branchnodes = encodelist(nodes)
         heads.append('%s %s' % (branchname, branchnodes))
     return '\n'.join(heads)
 
 @wireprotocommand('branches', 'nodes')
 def branches(repo, proto, nodes):
     nodes = decodelist(nodes)
     r = []
     for b in repo.branches(nodes):
         r.append(encodelist(b) + "\n")
     return "".join(r)
 
 
 wireprotocaps = ['lookup', 'changegroupsubset', 'branchmap', 'pushkey',
                  'known', 'getbundle', 'unbundlehash', 'batch']
 
 def _capabilities(repo, proto):
     """return a list of capabilities for a repo
 
     This function exists to allow extensions to easily wrap capabilities
     computation
 
     - returns a lists: easy to alter
     - change done here will be propagated to both `capabilities` and `hello`
       command without any other action needed.
     """
     # copy to prevent modification of the global list
     caps = list(wireprotocaps)
     if _allowstream(repo.ui):
         if repo.ui.configbool('server', 'preferuncompressed', False):
             caps.append('stream-preferred')
         requiredformats = repo.requirements & repo.supportedformats
         # if our local revlogs are just revlogv1, add 'stream' cap
         if not requiredformats - set(('revlogv1',)):
             caps.append('stream')
         # otherwise, add 'streamreqs' detailing our local revlog format
         else:
             caps.append('streamreqs=%s' % ','.join(requiredformats))
     if repo.ui.configbool('experimental', 'bundle2-exp', False):
         capsblob = bundle2.encodecaps(repo.bundle2caps)
         caps.append('bundle2-exp=' + urllib.quote(capsblob))
     caps.append('unbundle=%s' % ','.join(changegroupmod.bundlepriority))
     caps.append('httpheader=1024')
     return caps
 
 # If you are writing an extension and consider wrapping this function. Wrap
 # `_capabilities` instead.
 @wireprotocommand('capabilities')
 def capabilities(repo, proto):
     return ' '.join(_capabilities(repo, proto))
 
 @wireprotocommand('changegroup', 'roots')
 def changegroup(repo, proto, roots):
     nodes = decodelist(roots)
     cg = changegroupmod.changegroup(repo, nodes, 'serve')
     return streamres(proto.groupchunks(cg))
 
 @wireprotocommand('changegroupsubset', 'bases heads')
 def changegroupsubset(repo, proto, bases, heads):
     bases = decodelist(bases)
     heads = decodelist(heads)
     cg = changegroupmod.changegroupsubset(repo, bases, heads, 'serve')
     return streamres(proto.groupchunks(cg))
 
 @wireprotocommand('debugwireargs', 'one two *')
 def debugwireargs(repo, proto, one, two, others):
     # only accept optional args from the known set
     opts = options('debugwireargs', ['three', 'four'], others)
     return repo.debugwireargs(one, two, **opts)
 
 @wireprotocommand('getbundle', '*')
 def getbundle(repo, proto, others):
     opts = options('getbundle', ['heads', 'common', 'bundlecaps'], others)
     for k, v in opts.iteritems():
         if k in ('heads', 'common'):
             opts[k] = decodelist(v)
         elif k == 'bundlecaps':
             opts[k] = set(v.split(','))
     cg = exchange.getbundle(repo, 'serve', **opts)
     return streamres(proto.groupchunks(cg))
 
 @wireprotocommand('heads')
 def heads(repo, proto):
     h = repo.heads()
     return encodelist(h) + "\n"
 
 @wireprotocommand('hello')
 def hello(repo, proto):
     '''the hello command returns a set of lines describing various
     interesting things about the server, in an RFC822-like format.
     Currently the only one defined is "capabilities", which
     consists of a line in the form:
 
     capabilities: space separated list of tokens
     '''
     return "capabilities: %s\n" % (capabilities(repo, proto))
 
 @wireprotocommand('listkeys', 'namespace')
 def listkeys(repo, proto, namespace):
     d = repo.listkeys(encoding.tolocal(namespace)).items()
     t = '\n'.join(['%s\t%s' % (encoding.fromlocal(k), encoding.fromlocal(v))
                    for k, v in d])
     return t
 
 @wireprotocommand('lookup', 'key')
 def lookup(repo, proto, key):
     try:
         k = encoding.tolocal(key)
         c = repo[k]
         r = c.hex()
         success = 1
     except Exception, inst:
         r = str(inst)
         success = 0
     return "%s %s\n" % (success, r)
 
 @wireprotocommand('known', 'nodes *')
 def known(repo, proto, nodes, others):
     return ''.join(b and "1" or "0" for b in repo.known(decodelist(nodes)))
 
 @wireprotocommand('pushkey', 'namespace key old new')
 def pushkey(repo, proto, namespace, key, old, new):
     # compatibility with pre-1.8 clients which were accidentally
     # sending raw binary nodes rather than utf-8-encoded hex
     if len(new) == 20 and new.encode('string-escape') != new:
         # looks like it could be a binary node
         try:
             new.decode('utf-8')
             new = encoding.tolocal(new) # but cleanly decodes as UTF-8
         except UnicodeDecodeError:
             pass # binary, leave unmodified
     else:
         new = encoding.tolocal(new) # normal path
 
     if util.safehasattr(proto, 'restore'):
 
         proto.redirect()
 
         try:
             r = repo.pushkey(encoding.tolocal(namespace), encoding.tolocal(key),
                              encoding.tolocal(old), new) or False
         except util.Abort:
             r = False
 
         output = proto.restore()
 
         return '%s\n%s' % (int(r), output)
 
     r = repo.pushkey(encoding.tolocal(namespace), encoding.tolocal(key),
                      encoding.tolocal(old), new)
     return '%s\n' % int(r)
 
 def _allowstream(ui):
     return ui.configbool('server', 'uncompressed', True, untrusted=True)
 
 def _walkstreamfiles(repo):
     # this is it's own function so extensions can override it
     return repo.store.walk()
 
 @wireprotocommand('stream_out')
 def stream(repo, proto):
     '''If the server supports streaming clone, it advertises the "stream"
     capability with a value representing the version and flags of the repo
     it is serving. Client checks to see if it understands the format.
 
     The format is simple: the server writes out a line with the amount
     of files, then the total amount of bytes to be transferred (separated
     by a space). Then, for each file, the server first writes the filename
     and file size (separated by the null character), then the file contents.
     '''
 
     if not _allowstream(repo.ui):
         return '1\n'
 
     entries = []
     total_bytes = 0
     try:
         # get consistent snapshot of repo, lock during scan
         lock = repo.lock()
         try:
             repo.ui.debug('scanning\n')
             for name, ename, size in _walkstreamfiles(repo):
                 if size:
                     entries.append((name, size))
                     total_bytes += size
         finally:
             lock.release()
     except error.LockError:
         return '2\n' # error: 2
 
     def streamer(repo, entries, total):
         '''stream out all metadata files in repository.'''
         yield '0\n' # success
         repo.ui.debug('%d files, %d bytes to transfer\n' %
                       (len(entries), total_bytes))
         yield '%d %d\n' % (len(entries), total_bytes)
 
         sopener = repo.sopener
         oldaudit = sopener.mustaudit
         debugflag = repo.ui.debugflag
         sopener.mustaudit = False
 
         try:
             for name, size in entries:
                 if debugflag:
                     repo.ui.debug('sending %s (%d bytes)\n' % (name, size))
                 # partially encode name over the wire for backwards compat
                 yield '%s\0%d\n' % (store.encodedir(name), size)
                 if size <= 65536:
                     fp = sopener(name)
                     try:
                         data = fp.read(size)
                     finally:
                         fp.close()
                     yield data
                 else:
                     for chunk in util.filechunkiter(sopener(name), limit=size):
                         yield chunk
         # replace with "finally:" when support for python 2.4 has been dropped
         except Exception:
             sopener.mustaudit = oldaudit
             raise
         sopener.mustaudit = oldaudit
 
     return streamres(streamer(repo, entries, total_bytes))
 
 @wireprotocommand('unbundle', 'heads')
 def unbundle(repo, proto, heads):
     their_heads = decodelist(heads)
 
     try:
         proto.redirect()
 
         exchange.check_heads(repo, their_heads, 'preparing changes')
 
         # write bundle data to temporary file because it can be big
         fd, tempname = tempfile.mkstemp(prefix='hg-unbundle-')
         fp = os.fdopen(fd, 'wb+')
         r = 0
         try:
             proto.getfile(fp)
             fp.seek(0)
             gen = exchange.readbundle(repo.ui, fp, None)
             r = exchange.unbundle(repo, gen, their_heads, 'serve',
                                   proto._client())
             if util.safehasattr(r, 'addpart'):
                 # The return looks streameable, we are in the bundle2 case and
                 # should return a stream.
                 return streamres(r.getchunks())
             return pushres(r)
 
         finally:
             fp.close()
             os.unlink(tempname)
-    except bundle2.UnknownPartError, exc:
+    except bundle2.BundleValueError, exc:
             bundler = bundle2.bundle20(repo.ui)
             bundler.newpart('B2X:ERROR:UNKNOWNPART', [('parttype', str(exc))])
             return streamres(bundler.getchunks())
     except util.Abort, inst:
         # The old code we moved used sys.stderr directly.
         # We did not change it to minimise code change.
         # This need to be moved to something proper.
         # Feel free to do it.
         if getattr(inst, 'duringunbundle2', False):
             bundler = bundle2.bundle20(repo.ui)
             manargs = [('message', str(inst))]
             advargs = []
             if inst.hint is not None:
                 advargs.append(('hint', inst.hint))
             bundler.addpart(bundle2.bundlepart('B2X:ERROR:ABORT',
                                                manargs, advargs))
             return streamres(bundler.getchunks())
         else:
             sys.stderr.write("abort: %s\n" % inst)
             return pushres(0)
     except error.PushRaced, exc:
         if getattr(exc, 'duringunbundle2', False):
             bundler = bundle2.bundle20(repo.ui)
             bundler.newpart('B2X:ERROR:PUSHRACED', [('message', str(exc))])
             return streamres(bundler.getchunks())
         else:
             return pusherr(str(exc))

tests/test-bundle2.t

@@ -1,1085 +1,1085 b''
 
 Create an extension to test bundle2 API
 
   $ cat > bundle2.py << EOF
   > """A small extension to test bundle2 implementation
   > 
   > Current bundle2 implementation is far too limited to be used in any core
   > code. We still need to be able to test it while it grow up.
   > """
   > 
   > try:
   >     import msvcrt
   >     msvcrt.setmode(sys.stdin.fileno(), os.O_BINARY)
   >     msvcrt.setmode(sys.stdout.fileno(), os.O_BINARY)
   >     msvcrt.setmode(sys.stderr.fileno(), os.O_BINARY)
   > except ImportError:
   >     pass
   > 
   > import sys
   > from mercurial import cmdutil
   > from mercurial import util
   > from mercurial import bundle2
   > from mercurial import scmutil
   > from mercurial import discovery
   > from mercurial import changegroup
   > from mercurial import error
   > cmdtable = {}
   > command = cmdutil.command(cmdtable)
   > 
   > ELEPHANTSSONG = """Patali Dirapata, Cromda Cromda Ripalo, Pata Pata, Ko Ko Ko
   > Bokoro Dipoulito, Rondi Rondi Pepino, Pata Pata, Ko Ko Ko
   > Emana Karassoli, Loucra Loucra Ponponto, Pata Pata, Ko Ko Ko."""
   > assert len(ELEPHANTSSONG) == 178 # future test say 178 bytes, trust it.
   > 
   > @bundle2.parthandler('test:song')
   > def songhandler(op, part):
   >     """handle a "test:song" bundle2 part, printing the lyrics on stdin"""
   >     op.ui.write('The choir starts singing:\n')
   >     verses = 0
   >     for line in part.read().split('\n'):
   >         op.ui.write('    %s\n' % line)
   >         verses += 1
   >     op.records.add('song', {'verses': verses})
   > 
   > @bundle2.parthandler('test:ping')
   > def pinghandler(op, part):
   >     op.ui.write('received ping request (id %i)\n' % part.id)
   >     if op.reply is not None and 'ping-pong' in op.reply.capabilities:
   >         op.ui.write_err('replying to ping request (id %i)\n' % part.id)
   >         op.reply.newpart('test:pong', [('in-reply-to', str(part.id))])
   > 
   > @bundle2.parthandler('test:debugreply')
   > def debugreply(op, part):
   >     """print data about the capacity of the bundle reply"""
   >     if op.reply is None:
   >         op.ui.write('debugreply: no reply\n')
   >     else:
   >         op.ui.write('debugreply: capabilities:\n')
   >         for cap in sorted(op.reply.capabilities):
   >             op.ui.write('debugreply:     %r\n' % cap)
   >             for val in op.reply.capabilities[cap]:
   >                 op.ui.write('debugreply:         %r\n' % val)
   > 
   > @command('bundle2',
   >          [('', 'param', [], 'stream level parameter'),
   >           ('', 'unknown', False, 'include an unknown mandatory part in the bundle'),
   >           ('', 'parts', False, 'include some arbitrary parts to the bundle'),
   >           ('', 'reply', False, 'produce a reply bundle'),
   >           ('', 'pushrace', False, 'includes a check:head part with unknown nodes'),
   >           ('r', 'rev', [], 'includes those changeset in the bundle'),],
   >          '[OUTPUTFILE]')
   > def cmdbundle2(ui, repo, path=None, **opts):
   >     """write a bundle2 container on standard ouput"""
   >     bundler = bundle2.bundle20(ui)
   >     for p in opts['param']:
   >         p = p.split('=', 1)
   >         try:
   >             bundler.addparam(*p)
   >         except ValueError, exc:
   >             raise util.Abort('%s' % exc)
   > 
   >     if opts['reply']:
   >         capsstring = 'ping-pong\nelephants=babar,celeste\ncity%3D%21=celeste%2Cville'
   >         bundler.newpart('b2x:replycaps', data=capsstring)
   > 
   >     if opts['pushrace']:
   >         # also serve to test the assignement of data outside of init
   >         part = bundler.newpart('b2x:check:heads')
   >         part.data = '01234567890123456789'
   > 
   >     revs = opts['rev']
   >     if 'rev' in opts:
   >         revs = scmutil.revrange(repo, opts['rev'])
   >         if revs:
   >             # very crude version of a changegroup part creation
   >             bundled = repo.revs('%ld::%ld', revs, revs)
   >             headmissing = [c.node() for c in repo.set('heads(%ld)', revs)]
   >             headcommon  = [c.node() for c in repo.set('parents(%ld) - %ld', revs, revs)]
   >             outgoing = discovery.outgoing(repo.changelog, headcommon, headmissing)
   >             cg = changegroup.getlocalbundle(repo, 'test:bundle2', outgoing, None)
   >             bundler.newpart('b2x:changegroup', data=cg.getchunks())
   > 
   >     if opts['parts']:
   >        bundler.newpart('test:empty')
   >        # add a second one to make sure we handle multiple parts
   >        bundler.newpart('test:empty')
   >        bundler.newpart('test:song', data=ELEPHANTSSONG)
   >        bundler.newpart('test:debugreply')
   >        mathpart = bundler.newpart('test:math')
   >        mathpart.addparam('pi', '3.14')
   >        mathpart.addparam('e', '2.72')
   >        mathpart.addparam('cooking', 'raw', mandatory=False)
   >        mathpart.data = '42'
   >     if opts['unknown']:
   >        bundler.newpart('test:UNKNOWN', data='some random content')
   >     if opts['parts']:
   >        bundler.newpart('test:ping')
   > 
   >     if path is None:
   >        file = sys.stdout
   >     else:
   >         file = open(path, 'w')
   > 
   >     for chunk in bundler.getchunks():
   >         file.write(chunk)
   > 
   > @command('unbundle2', [], '')
   > def cmdunbundle2(ui, repo, replypath=None):
   >     """process a bundle2 stream from stdin on the current repo"""
   >     try:
   >         tr = None
   >         lock = repo.lock()
   >         tr = repo.transaction('processbundle')
   >         try:
   >             unbundler = bundle2.unbundle20(ui, sys.stdin)
   >             op = bundle2.processbundle(repo, unbundler, lambda: tr)
   >             tr.close()
-  >         except KeyError, exc:
+  >         except bundle2.BundleValueError, exc:
   >             raise util.Abort('missing support for %s' % exc)
   >         except error.PushRaced, exc:
   >             raise util.Abort('push race: %s' % exc)
   >     finally:
   >         if tr is not None:
   >             tr.release()
   >         lock.release()
   >         remains = sys.stdin.read()
   >         ui.write('%i unread bytes\n' % len(remains))
   >     if op.records['song']:
   >         totalverses = sum(r['verses'] for r in op.records['song'])
   >         ui.write('%i total verses sung\n' % totalverses)
   >     for rec in op.records['changegroup']:
   >         ui.write('addchangegroup return: %i\n' % rec['return'])
   >     if op.reply is not None and replypath is not None:
   >         file = open(replypath, 'w')
   >         for chunk in op.reply.getchunks():
   >             file.write(chunk)
   > 
   > @command('statbundle2', [], '')
   > def cmdstatbundle2(ui, repo):
   >     """print statistic on the bundle2 container read from stdin"""
   >     unbundler = bundle2.unbundle20(ui, sys.stdin)
   >     try:
   >         params = unbundler.params
   >     except KeyError, exc:
   >        raise util.Abort('unknown parameters: %s' % exc)
   >     ui.write('options count: %i\n' % len(params))
   >     for key in sorted(params):
   >         ui.write('- %s\n' % key)
   >         value = params[key]
   >         if value is not None:
   >             ui.write('    %s\n' % value)
   >     count = 0
   >     for p in unbundler.iterparts():
   >         count += 1
   >         ui.write('  :%s:\n' % p.type)
   >         ui.write('    mandatory: %i\n' % len(p.mandatoryparams))
   >         ui.write('    advisory: %i\n' % len(p.advisoryparams))
   >         ui.write('    payload: %i bytes\n' % len(p.read()))
   >     ui.write('parts count:   %i\n' % count)
   > EOF
   $ cat >> $HGRCPATH << EOF
   > [extensions]
   > bundle2=$TESTTMP/bundle2.py
   > [experimental]
   > bundle2-exp=True
   > [ui]
   > ssh=python "$TESTDIR/dummyssh"
   > [web]
   > push_ssl = false
   > allow_push = *
   > EOF
 
 The extension requires a repo (currently unused)
 
   $ hg init main
   $ cd main
   $ touch a
   $ hg add a
   $ hg commit -m 'a'
 
 
 Empty bundle
 =================
 
 - no option
 - no parts
 
 Test bundling
 
   $ hg bundle2
   HG2X\x00\x00\x00\x00 (no-eol) (esc)
 
 Test unbundling
 
   $ hg bundle2 | hg statbundle2
   options count: 0
   parts count:   0
 
 Test old style bundle are detected and refused
 
   $ hg bundle --all ../bundle.hg
   1 changesets found
   $ hg statbundle2 < ../bundle.hg
   abort: unknown bundle version 10
   [255]
 
 Test parameters
 =================
 
 - some options
 - no parts
 
 advisory parameters, no value
 -------------------------------
 
 Simplest possible parameters form
 
 Test generation simple option
 
   $ hg bundle2 --param 'caution'
   HG2X\x00\x07caution\x00\x00 (no-eol) (esc)
 
 Test unbundling
 
   $ hg bundle2 --param 'caution' | hg statbundle2
   options count: 1
   - caution
   parts count:   0
 
 Test generation multiple option
 
   $ hg bundle2 --param 'caution' --param 'meal'
   HG2X\x00\x0ccaution meal\x00\x00 (no-eol) (esc)
 
 Test unbundling
 
   $ hg bundle2 --param 'caution' --param 'meal' | hg statbundle2
   options count: 2
   - caution
   - meal
   parts count:   0
 
 advisory parameters, with value
 -------------------------------
 
 Test generation
 
   $ hg bundle2 --param 'caution' --param 'meal=vegan' --param 'elephants'
   HG2X\x00\x1ccaution meal=vegan elephants\x00\x00 (no-eol) (esc)
 
 Test unbundling
 
   $ hg bundle2 --param 'caution' --param 'meal=vegan' --param 'elephants' | hg statbundle2
   options count: 3
   - caution
   - elephants
   - meal
       vegan
   parts count:   0
 
 parameter with special char in value
 ---------------------------------------------------
 
 Test generation
 
   $ hg bundle2 --param 'e|! 7/=babar%#==tutu' --param simple
   HG2X\x00)e%7C%21%207/=babar%25%23%3D%3Dtutu simple\x00\x00 (no-eol) (esc)
 
 Test unbundling
 
   $ hg bundle2 --param 'e|! 7/=babar%#==tutu' --param simple | hg statbundle2
   options count: 2
   - e|! 7/
       babar%#==tutu
   - simple
   parts count:   0
 
 Test unknown mandatory option
 ---------------------------------------------------
 
   $ hg bundle2 --param 'Gravity' | hg statbundle2
   abort: unknown parameters: 'Gravity'
   [255]
 
 Test debug output
 ---------------------------------------------------
 
 bundling debug
 
   $ hg bundle2 --debug --param 'e|! 7/=babar%#==tutu' --param simple ../out.hg2
   start emission of HG2X stream
   bundle parameter: e%7C%21%207/=babar%25%23%3D%3Dtutu simple
   start of parts
   end of bundle
 
 file content is ok
 
   $ cat ../out.hg2
   HG2X\x00)e%7C%21%207/=babar%25%23%3D%3Dtutu simple\x00\x00 (no-eol) (esc)
 
 unbundling debug
 
   $ hg statbundle2 --debug < ../out.hg2
   start processing of HG2X stream
   reading bundle2 stream parameters
   ignoring unknown parameter 'e|! 7/'
   ignoring unknown parameter 'simple'
   options count: 2
   - e|! 7/
       babar%#==tutu
   - simple
   start extraction of bundle2 parts
   part header size: 0
   end of bundle2 stream
   parts count:   0
 
 
 Test buggy input
 ---------------------------------------------------
 
 empty parameter name
 
   $ hg bundle2 --param '' --quiet
   abort: empty parameter name
   [255]
 
 bad parameter name
 
   $ hg bundle2 --param 42babar
   abort: non letter first character: '42babar'
   [255]
 
 
 Test part
 =================
 
   $ hg bundle2 --parts ../parts.hg2 --debug
   start emission of HG2X stream
   bundle parameter: 
   start of parts
   bundle part: "test:empty"
   bundle part: "test:empty"
   bundle part: "test:song"
   bundle part: "test:debugreply"
   bundle part: "test:math"
   bundle part: "test:ping"
   end of bundle
 
   $ cat ../parts.hg2
   HG2X\x00\x00\x00\x11 (esc)
   test:empty\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11 (esc)
   test:empty\x00\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00\x10	test:song\x00\x00\x00\x02\x00\x00\x00\x00\x00\xb2Patali Dirapata, Cromda Cromda Ripalo, Pata Pata, Ko Ko Ko (esc)
   Bokoro Dipoulito, Rondi Rondi Pepino, Pata Pata, Ko Ko Ko
   Emana Karassoli, Loucra Loucra Ponponto, Pata Pata, Ko Ko Ko.\x00\x00\x00\x00\x00\x16\x0ftest:debugreply\x00\x00\x00\x03\x00\x00\x00\x00\x00\x00\x00+	test:math\x00\x00\x00\x04\x02\x01\x02\x04\x01\x04\x07\x03pi3.14e2.72cookingraw\x00\x00\x00\x0242\x00\x00\x00\x00\x00\x10	test:ping\x00\x00\x00\x05\x00\x00\x00\x00\x00\x00\x00\x00 (no-eol) (esc)
 
 
   $ hg statbundle2 < ../parts.hg2
   options count: 0
     :test:empty:
       mandatory: 0
       advisory: 0
       payload: 0 bytes
     :test:empty:
       mandatory: 0
       advisory: 0
       payload: 0 bytes
     :test:song:
       mandatory: 0
       advisory: 0
       payload: 178 bytes
     :test:debugreply:
       mandatory: 0
       advisory: 0
       payload: 0 bytes
     :test:math:
       mandatory: 2
       advisory: 1
       payload: 2 bytes
     :test:ping:
       mandatory: 0
       advisory: 0
       payload: 0 bytes
   parts count:   6
 
   $ hg statbundle2 --debug < ../parts.hg2
   start processing of HG2X stream
   reading bundle2 stream parameters
   options count: 0
   start extraction of bundle2 parts
   part header size: 17
   part type: "test:empty"
   part id: "0"
   part parameters: 0
     :test:empty:
       mandatory: 0
       advisory: 0
   payload chunk size: 0
       payload: 0 bytes
   part header size: 17
   part type: "test:empty"
   part id: "1"
   part parameters: 0
     :test:empty:
       mandatory: 0
       advisory: 0
   payload chunk size: 0
       payload: 0 bytes
   part header size: 16
   part type: "test:song"
   part id: "2"
   part parameters: 0
     :test:song:
       mandatory: 0
       advisory: 0
   payload chunk size: 178
   payload chunk size: 0
       payload: 178 bytes
   part header size: 22
   part type: "test:debugreply"
   part id: "3"
   part parameters: 0
     :test:debugreply:
       mandatory: 0
       advisory: 0
   payload chunk size: 0
       payload: 0 bytes
   part header size: 43
   part type: "test:math"
   part id: "4"
   part parameters: 3
     :test:math:
       mandatory: 2
       advisory: 1
   payload chunk size: 2
   payload chunk size: 0
       payload: 2 bytes
   part header size: 16
   part type: "test:ping"
   part id: "5"
   part parameters: 0
     :test:ping:
       mandatory: 0
       advisory: 0
   payload chunk size: 0
       payload: 0 bytes
   part header size: 0
   end of bundle2 stream
   parts count:   6
 
 Test actual unbundling of test part
 =======================================
 
 Process the bundle
 
   $ hg unbundle2 --debug < ../parts.hg2
   start processing of HG2X stream
   reading bundle2 stream parameters
   start extraction of bundle2 parts
   part header size: 17
   part type: "test:empty"
   part id: "0"
   part parameters: 0
   ignoring unknown advisory part 'test:empty'
   payload chunk size: 0
   part header size: 17
   part type: "test:empty"
   part id: "1"
   part parameters: 0
   ignoring unknown advisory part 'test:empty'
   payload chunk size: 0
   part header size: 16
   part type: "test:song"
   part id: "2"
   part parameters: 0
   found a handler for part 'test:song'
   The choir starts singing:
   payload chunk size: 178
   payload chunk size: 0
       Patali Dirapata, Cromda Cromda Ripalo, Pata Pata, Ko Ko Ko
       Bokoro Dipoulito, Rondi Rondi Pepino, Pata Pata, Ko Ko Ko
       Emana Karassoli, Loucra Loucra Ponponto, Pata Pata, Ko Ko Ko.
   part header size: 22
   part type: "test:debugreply"
   part id: "3"
   part parameters: 0
   found a handler for part 'test:debugreply'
   debugreply: no reply
   payload chunk size: 0
   part header size: 43
   part type: "test:math"
   part id: "4"
   part parameters: 3
   ignoring unknown advisory part 'test:math'
   payload chunk size: 2
   payload chunk size: 0
   part header size: 16
   part type: "test:ping"
   part id: "5"
   part parameters: 0
   found a handler for part 'test:ping'
   received ping request (id 5)
   payload chunk size: 0
   part header size: 0
   end of bundle2 stream
   0 unread bytes
   3 total verses sung
 
 Unbundle with an unknown mandatory part
 (should abort)
 
   $ hg bundle2 --parts --unknown ../unknown.hg2
 
   $ hg unbundle2 < ../unknown.hg2
   The choir starts singing:
       Patali Dirapata, Cromda Cromda Ripalo, Pata Pata, Ko Ko Ko
       Bokoro Dipoulito, Rondi Rondi Pepino, Pata Pata, Ko Ko Ko
       Emana Karassoli, Loucra Loucra Ponponto, Pata Pata, Ko Ko Ko.
   debugreply: no reply
   0 unread bytes
-  abort: missing support for 'test:unknown'
+  abort: missing support for test:unknown
   [255]
 
 unbundle with a reply
 
   $ hg bundle2 --parts --reply ../parts-reply.hg2
   $ hg unbundle2 ../reply.hg2 < ../parts-reply.hg2
   0 unread bytes
   3 total verses sung
 
 The reply is a bundle
 
   $ cat ../reply.hg2
   HG2X\x00\x00\x00\x1f (esc)
   b2x:output\x00\x00\x00\x00\x00\x01\x0b\x01in-reply-to3\x00\x00\x00\xd9The choir starts singing: (esc)
       Patali Dirapata, Cromda Cromda Ripalo, Pata Pata, Ko Ko Ko
       Bokoro Dipoulito, Rondi Rondi Pepino, Pata Pata, Ko Ko Ko
       Emana Karassoli, Loucra Loucra Ponponto, Pata Pata, Ko Ko Ko.
   \x00\x00\x00\x00\x00\x1f (esc)
   b2x:output\x00\x00\x00\x01\x00\x01\x0b\x01in-reply-to4\x00\x00\x00\xc9debugreply: capabilities: (esc)
   debugreply:     'city=!'
   debugreply:         'celeste,ville'
   debugreply:     'elephants'
   debugreply:         'babar'
   debugreply:         'celeste'
   debugreply:     'ping-pong'
   \x00\x00\x00\x00\x00\x1e	test:pong\x00\x00\x00\x02\x01\x00\x0b\x01in-reply-to6\x00\x00\x00\x00\x00\x1f (esc)
   b2x:output\x00\x00\x00\x03\x00\x01\x0b\x01in-reply-to6\x00\x00\x00=received ping request (id 6) (esc)
   replying to ping request (id 6)
   \x00\x00\x00\x00\x00\x00 (no-eol) (esc)
 
 The reply is valid
 
   $ hg statbundle2 < ../reply.hg2
   options count: 0
     :b2x:output:
       mandatory: 0
       advisory: 1
       payload: 217 bytes
     :b2x:output:
       mandatory: 0
       advisory: 1
       payload: 201 bytes
     :test:pong:
       mandatory: 1
       advisory: 0
       payload: 0 bytes
     :b2x:output:
       mandatory: 0
       advisory: 1
       payload: 61 bytes
   parts count:   4
 
 Unbundle the reply to get the output:
 
   $ hg unbundle2 < ../reply.hg2
   remote: The choir starts singing:
   remote:     Patali Dirapata, Cromda Cromda Ripalo, Pata Pata, Ko Ko Ko
   remote:     Bokoro Dipoulito, Rondi Rondi Pepino, Pata Pata, Ko Ko Ko
   remote:     Emana Karassoli, Loucra Loucra Ponponto, Pata Pata, Ko Ko Ko.
   remote: debugreply: capabilities:
   remote: debugreply:     'city=!'
   remote: debugreply:         'celeste,ville'
   remote: debugreply:     'elephants'
   remote: debugreply:         'babar'
   remote: debugreply:         'celeste'
   remote: debugreply:     'ping-pong'
   remote: received ping request (id 6)
   remote: replying to ping request (id 6)
   0 unread bytes
 
 Test push race detection
 
   $ hg bundle2 --pushrace ../part-race.hg2
 
   $ hg unbundle2 < ../part-race.hg2
   0 unread bytes
   abort: push race: repository changed while pushing - please try again
   [255]
 
 Support for changegroup
 ===================================
 
   $ hg unbundle $TESTDIR/bundles/rebase.hg
   adding changesets
   adding manifests
   adding file changes
   added 8 changesets with 7 changes to 7 files (+3 heads)
   (run 'hg heads' to see heads, 'hg merge' to merge)
 
   $ hg log -G
   o  changeset:   8:02de42196ebe
   |  tag:         tip
   |  parent:      6:24b6387c8c8c
   |  user:        Nicolas Dumazet <[e-mail]>
   |  date:        Sat Apr 30 15:24:48 2011 +0200
   |  summary:     H
   |
   | o  changeset:   7:eea13746799a
   |/|  parent:      6:24b6387c8c8c
   | |  parent:      5:9520eea781bc
   | |  user:        Nicolas Dumazet <[e-mail]>
   | |  date:        Sat Apr 30 15:24:48 2011 +0200
   | |  summary:     G
   | |
   o |  changeset:   6:24b6387c8c8c
   | |  parent:      1:cd010b8cd998
   | |  user:        Nicolas Dumazet <[e-mail]>
   | |  date:        Sat Apr 30 15:24:48 2011 +0200
   | |  summary:     F
   | |
   | o  changeset:   5:9520eea781bc
   |/   parent:      1:cd010b8cd998
   |    user:        Nicolas Dumazet <[e-mail]>
   |    date:        Sat Apr 30 15:24:48 2011 +0200
   |    summary:     E
   |
   | o  changeset:   4:32af7686d403
   | |  user:        Nicolas Dumazet <[e-mail]>
   | |  date:        Sat Apr 30 15:24:48 2011 +0200
   | |  summary:     D
   | |
   | o  changeset:   3:5fddd98957c8
   | |  user:        Nicolas Dumazet <[e-mail]>
   | |  date:        Sat Apr 30 15:24:48 2011 +0200
   | |  summary:     C
   | |
   | o  changeset:   2:42ccdea3bb16
   |/   user:        Nicolas Dumazet <[e-mail]>
   |    date:        Sat Apr 30 15:24:48 2011 +0200
   |    summary:     B
   |
   o  changeset:   1:cd010b8cd998
      parent:      -1:000000000000
      user:        Nicolas Dumazet <[e-mail]>
      date:        Sat Apr 30 15:24:48 2011 +0200
      summary:     A
   
   @  changeset:   0:3903775176ed
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
   $ hg bundle2 --debug --rev '8+7+5+4' ../rev.hg2
   4 changesets found
   list of changesets:
   32af7686d403cf45b5d95f2d70cebea587ac806a
   9520eea781bcca16c1e15acc0ba14335a0e8e5ba
   eea13746799a9e0bfd88f29d3c2e9dc9389f524f
   02de42196ebee42ef284b6780a87cdc96e8eaab6
   start emission of HG2X stream
   bundle parameter: 
   start of parts
   bundle part: "b2x:changegroup"
   bundling: 1/4 changesets (25.00%)
   bundling: 2/4 changesets (50.00%)
   bundling: 3/4 changesets (75.00%)
   bundling: 4/4 changesets (100.00%)
   bundling: 1/4 manifests (25.00%)
   bundling: 2/4 manifests (50.00%)
   bundling: 3/4 manifests (75.00%)
   bundling: 4/4 manifests (100.00%)
   bundling: D 1/3 files (33.33%)
   bundling: E 2/3 files (66.67%)
   bundling: H 3/3 files (100.00%)
   end of bundle
 
   $ cat ../rev.hg2
   HG2X\x00\x00\x00\x16\x0fb2x:changegroup\x00\x00\x00\x00\x00\x00\x00\x00\x06\x13\x00\x00\x00\xa42\xafv\x86\xd4\x03\xcfE\xb5\xd9_-p\xce\xbe\xa5\x87\xac\x80j_\xdd\xd9\x89W\xc8\xa5JMCm\xfe\x1d\xa9\xd8\x7f!\xa1\xb9{\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x002\xafv\x86\xd4\x03\xcfE\xb5\xd9_-p\xce\xbe\xa5\x87\xac\x80j\x00\x00\x00\x00\x00\x00\x00)\x00\x00\x00)6e1f4c47ecb533ffd0c8e52cdc88afb6cd39e20c (esc)
   \x00\x00\x00f\x00\x00\x00h\x00\x00\x00\x02D (esc)
   \x00\x00\x00i\x00\x00\x00j\x00\x00\x00\x01D\x00\x00\x00\xa4\x95 \xee\xa7\x81\xbc\xca\x16\xc1\xe1Z\xcc\x0b\xa1C5\xa0\xe8\xe5\xba\xcd\x01\x0b\x8c\xd9\x98\xf3\x98\x1aZ\x81\x15\xf9O\x8d\xa4\xabP`\x89\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x95 \xee\xa7\x81\xbc\xca\x16\xc1\xe1Z\xcc\x0b\xa1C5\xa0\xe8\xe5\xba\x00\x00\x00\x00\x00\x00\x00)\x00\x00\x00)4dece9c826f69490507b98c6383a3009b295837d (esc)
   \x00\x00\x00f\x00\x00\x00h\x00\x00\x00\x02E (esc)
   \x00\x00\x00i\x00\x00\x00j\x00\x00\x00\x01E\x00\x00\x00\xa2\xee\xa17Fy\x9a\x9e\x0b\xfd\x88\xf2\x9d<.\x9d\xc98\x9fRO$\xb68|\x8c\x8c\xae7\x17\x88\x80\xf3\xfa\x95\xde\xd3\xcb\x1c\xf7\x85\x95 \xee\xa7\x81\xbc\xca\x16\xc1\xe1Z\xcc\x0b\xa1C5\xa0\xe8\xe5\xba\xee\xa17Fy\x9a\x9e\x0b\xfd\x88\xf2\x9d<.\x9d\xc98\x9fRO\x00\x00\x00\x00\x00\x00\x00)\x00\x00\x00)365b93d57fdf4814e2b5911d6bacff2b12014441 (esc)
   \x00\x00\x00f\x00\x00\x00h\x00\x00\x00\x00\x00\x00\x00i\x00\x00\x00j\x00\x00\x00\x01G\x00\x00\x00\xa4\x02\xdeB\x19n\xbe\xe4.\xf2\x84\xb6x (esc)
   \x87\xcd\xc9n\x8e\xaa\xb6$\xb68|\x8c\x8c\xae7\x17\x88\x80\xf3\xfa\x95\xde\xd3\xcb\x1c\xf7\x85\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\xdeB\x19n\xbe\xe4.\xf2\x84\xb6x (esc)
   \x87\xcd\xc9n\x8e\xaa\xb6\x00\x00\x00\x00\x00\x00\x00)\x00\x00\x00)8bee48edc7318541fc0013ee41b089276a8c24bf (esc)
   \x00\x00\x00f\x00\x00\x00f\x00\x00\x00\x02H (esc)
   \x00\x00\x00g\x00\x00\x00h\x00\x00\x00\x01H\x00\x00\x00\x00\x00\x00\x00\x8bn\x1fLG\xec\xb53\xff\xd0\xc8\xe5,\xdc\x88\xaf\xb6\xcd9\xe2\x0cf\xa5\xa0\x18\x17\xfd\xf5#\x9c'8\x02\xb5\xb7a\x8d\x05\x1c\x89\xe4\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x002\xafv\x86\xd4\x03\xcfE\xb5\xd9_-p\xce\xbe\xa5\x87\xac\x80j\x00\x00\x00\x81\x00\x00\x00\x81\x00\x00\x00+D\x00c3f1ca2924c16a19b0656a84900e504e5b0aec2d (esc)
   \x00\x00\x00\x8bM\xec\xe9\xc8&\xf6\x94\x90P{\x98\xc68:0	\xb2\x95\x83}\x00}\x8c\x9d\x88\x84\x13%\xf5\xc6\xb0cq\xb3[N\x8a+\x1a\x83\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x95 \xee\xa7\x81\xbc\xca\x16\xc1\xe1Z\xcc\x0b\xa1C5\xa0\xe8\xe5\xba\x00\x00\x00+\x00\x00\x00\xac\x00\x00\x00+E\x009c6fd0350a6c0d0c49d4a9c5017cf07043f54e58 (esc)
   \x00\x00\x00\x8b6[\x93\xd5\x7f\xdfH\x14\xe2\xb5\x91\x1dk\xac\xff+\x12\x01DA(\xa5\x84\xc6^\xf1!\xf8\x9e\xb6j\xb7\xd0\xbc\x15=\x80\x99\xe7\xceM\xec\xe9\xc8&\xf6\x94\x90P{\x98\xc68:0	\xb2\x95\x83}\xee\xa17Fy\x9a\x9e\x0b\xfd\x88\xf2\x9d<.\x9d\xc98\x9fRO\x00\x00\x00V\x00\x00\x00V\x00\x00\x00+F\x0022bfcfd62a21a3287edbd4d656218d0f525ed76a (esc)
   \x00\x00\x00\x97\x8b\xeeH\xed\xc71\x85A\xfc\x00\x13\xeeA\xb0\x89'j\x8c$\xbf(\xa5\x84\xc6^\xf1!\xf8\x9e\xb6j\xb7\xd0\xbc\x15=\x80\x99\xe7\xce\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\xdeB\x19n\xbe\xe4.\xf2\x84\xb6x (esc)
   \x87\xcd\xc9n\x8e\xaa\xb6\x00\x00\x00+\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x81\x00\x00\x00\x81\x00\x00\x00+H\x008500189e74a9e0475e822093bc7db0d631aeb0b4 (esc)
   \x00\x00\x00\x00\x00\x00\x00\x05D\x00\x00\x00b\xc3\xf1\xca)$\xc1j\x19\xb0ej\x84\x90\x0ePN[ (esc)
   \xec-\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x002\xafv\x86\xd4\x03\xcfE\xb5\xd9_-p\xce\xbe\xa5\x87\xac\x80j\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02D (esc)
   \x00\x00\x00\x00\x00\x00\x00\x05E\x00\x00\x00b\x9co\xd05 (esc)
   l\r (no-eol) (esc)
   \x0cI\xd4\xa9\xc5\x01|\xf0pC\xf5NX\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x95 \xee\xa7\x81\xbc\xca\x16\xc1\xe1Z\xcc\x0b\xa1C5\xa0\xe8\xe5\xba\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02E (esc)
   \x00\x00\x00\x00\x00\x00\x00\x05H\x00\x00\x00b\x85\x00\x18\x9et\xa9\xe0G^\x82 \x93\xbc}\xb0\xd61\xae\xb0\xb4\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\xdeB\x19n\xbe\xe4.\xf2\x84\xb6x (esc)
   \x87\xcd\xc9n\x8e\xaa\xb6\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02H (esc)
   \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00 (no-eol) (esc)
 
   $ hg unbundle2 < ../rev.hg2
   adding changesets
   adding manifests
   adding file changes
   added 0 changesets with 0 changes to 3 files
   0 unread bytes
   addchangegroup return: 1
 
 with reply
 
   $ hg bundle2 --rev '8+7+5+4' --reply ../rev-rr.hg2
   $ hg unbundle2 ../rev-reply.hg2 < ../rev-rr.hg2
   0 unread bytes
   addchangegroup return: 1
 
   $ cat ../rev-reply.hg2
   HG2X\x00\x00\x003\x15b2x:reply:changegroup\x00\x00\x00\x00\x00\x02\x0b\x01\x06\x01in-reply-to1return1\x00\x00\x00\x00\x00\x1f (esc)
   b2x:output\x00\x00\x00\x01\x00\x01\x0b\x01in-reply-to1\x00\x00\x00dadding changesets (esc)
   adding manifests
   adding file changes
   added 0 changesets with 0 changes to 3 files
   \x00\x00\x00\x00\x00\x00 (no-eol) (esc)
 
 Real world exchange
 =====================
 
 
 clone --pull
 
   $ cd ..
   $ hg clone main other --pull --rev 9520eea781bc
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 2 changes to 2 files
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R other log -G
   @  changeset:   1:9520eea781bc
   |  tag:         tip
   |  user:        Nicolas Dumazet <[e-mail]>
   |  date:        Sat Apr 30 15:24:48 2011 +0200
   |  summary:     E
   |
   o  changeset:   0:cd010b8cd998
      user:        Nicolas Dumazet <[e-mail]>
      date:        Sat Apr 30 15:24:48 2011 +0200
      summary:     A
   
 
 pull
 
   $ hg -R other pull -r 24b6387c8c8c
   pulling from $TESTTMP/main (glob)
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (+1 heads)
   (run 'hg heads' to see heads, 'hg merge' to merge)
 
 pull empty
 
   $ hg -R other pull -r 24b6387c8c8c
   pulling from $TESTTMP/main (glob)
   no changes found
 
 push
 
   $ hg -R main push other --rev eea13746799a
   pushing to other
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 0 changes to 0 files (-1 heads)
 
 pull over ssh
 
   $ hg -R other pull ssh://user@dummy/main -r 02de42196ebe --traceback
   pulling from ssh://user@dummy/main
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (+1 heads)
   (run 'hg heads' to see heads, 'hg merge' to merge)
 
 pull over http
 
   $ hg -R main serve -p $HGPORT -d --pid-file=main.pid -E main-error.log
   $ cat main.pid >> $DAEMON_PIDS
 
   $ hg -R other pull http://localhost:$HGPORT/ -r 42ccdea3bb16
   pulling from http://localhost:$HGPORT/
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (+1 heads)
   (run 'hg heads .' to see heads, 'hg merge' to merge)
   $ cat main-error.log
 
 push over ssh
 
   $ hg -R main push ssh://user@dummy/other -r 5fddd98957c8
   pushing to ssh://user@dummy/other
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
 
 push over http
 
   $ hg -R other serve -p $HGPORT2 -d --pid-file=other.pid -E other-error.log
   $ cat other.pid >> $DAEMON_PIDS
 
   $ hg -R main push http://localhost:$HGPORT2/ -r 32af7686d403
   pushing to http://localhost:$HGPORT2/
   searching for changes
   remote: adding changesets
   remote: adding manifests
   remote: adding file changes
   remote: added 1 changesets with 1 changes to 1 files
   $ cat other-error.log
 
 Check final content.
 
   $ hg -R other log -G
   o  changeset:   7:32af7686d403
   |  tag:         tip
   |  user:        Nicolas Dumazet <[e-mail]>
   |  date:        Sat Apr 30 15:24:48 2011 +0200
   |  summary:     D
   |
   o  changeset:   6:5fddd98957c8
   |  user:        Nicolas Dumazet <[e-mail]>
   |  date:        Sat Apr 30 15:24:48 2011 +0200
   |  summary:     C
   |
   o  changeset:   5:42ccdea3bb16
   |  parent:      0:cd010b8cd998
   |  user:        Nicolas Dumazet <[e-mail]>
   |  date:        Sat Apr 30 15:24:48 2011 +0200
   |  summary:     B
   |
   | o  changeset:   4:02de42196ebe
   | |  parent:      2:24b6387c8c8c
   | |  user:        Nicolas Dumazet <[e-mail]>
   | |  date:        Sat Apr 30 15:24:48 2011 +0200
   | |  summary:     H
   | |
   | | o  changeset:   3:eea13746799a
   | |/|  parent:      2:24b6387c8c8c
   | | |  parent:      1:9520eea781bc
   | | |  user:        Nicolas Dumazet <[e-mail]>
   | | |  date:        Sat Apr 30 15:24:48 2011 +0200
   | | |  summary:     G
   | | |
   | o |  changeset:   2:24b6387c8c8c
   |/ /   parent:      0:cd010b8cd998
   | |    user:        Nicolas Dumazet <[e-mail]>
   | |    date:        Sat Apr 30 15:24:48 2011 +0200
   | |    summary:     F
   | |
   | @  changeset:   1:9520eea781bc
   |/   user:        Nicolas Dumazet <[e-mail]>
   |    date:        Sat Apr 30 15:24:48 2011 +0200
   |    summary:     E
   |
   o  changeset:   0:cd010b8cd998
      user:        Nicolas Dumazet <[e-mail]>
      date:        Sat Apr 30 15:24:48 2011 +0200
      summary:     A
   
 
 Error Handling
 ==============
 
 Check that errors are properly returned to the client during push.
 
 Setting up
 
   $ cat > failpush.py << EOF
   > """A small extension that makes push fails when using bundle2
   > 
   > used to test error handling in bundle2
   > """
   > 
   > from mercurial import util
   > from mercurial import bundle2
   > from mercurial import exchange
   > from mercurial import extensions
   > 
   > def _pushbundle2failpart(orig, pushop, bundler):
   >     extradata = orig(pushop, bundler)
   >     reason = pushop.ui.config('failpush', 'reason', None)
   >     part = None
   >     if reason == 'abort':
   >         bundler.newpart('test:abort')
   >     if reason == 'unknown':
   >         bundler.newpart('TEST:UNKNOWN')
   >     if reason == 'race':
   >         # 20 Bytes of crap
   >         bundler.newpart('b2x:check:heads', data='01234567890123456789')
   >     return extradata
   > 
   > @bundle2.parthandler("test:abort")
   > def handleabort(op, part):
   >     raise util.Abort('Abandon ship!', hint="don't panic")
   > 
   > def uisetup(ui):
   >     extensions.wrapfunction(exchange, '_pushbundle2extraparts', _pushbundle2failpart)
   > 
   > EOF
 
   $ cd main
   $ hg up tip
   3 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ echo 'I' > I
   $ hg add I
   $ hg ci -m 'I'
   $ hg id
   e7ec4e813ba6 tip
   $ cd ..
 
   $ cat << EOF >> $HGRCPATH
   > [extensions]
   > failpush=$TESTTMP/failpush.py
   > EOF
 
   $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS
   $ hg -R other serve -p $HGPORT2 -d --pid-file=other.pid -E other-error.log
   $ cat other.pid >> $DAEMON_PIDS
 
 Doing the actual push: Abort error
 
   $ cat << EOF >> $HGRCPATH
   > [failpush]
   > reason = abort
   > EOF
 
   $ hg -R main push other -r e7ec4e813ba6
   pushing to other
   searching for changes
   abort: Abandon ship!
   (don't panic)
   [255]
 
   $ hg -R main push ssh://user@dummy/other -r e7ec4e813ba6
   pushing to ssh://user@dummy/other
   searching for changes
   abort: Abandon ship!
   (don't panic)
   [255]
 
   $ hg -R main push http://localhost:$HGPORT2/ -r e7ec4e813ba6
   pushing to http://localhost:$HGPORT2/
   searching for changes
   abort: Abandon ship!
   (don't panic)
   [255]
 
 
 Doing the actual push: unknown mandatory parts
 
   $ cat << EOF >> $HGRCPATH
   > [failpush]
   > reason = unknown
   > EOF
 
   $ hg -R main push other -r e7ec4e813ba6
   pushing to other
   searching for changes
-  abort: missing support for 'test:unknown'
+  abort: missing support for test:unknown
   [255]
 
   $ hg -R main push ssh://user@dummy/other -r e7ec4e813ba6
   pushing to ssh://user@dummy/other
   searching for changes
-  abort: missing support for "'test:unknown'"
+  abort: missing support for test:unknown
   [255]
 
   $ hg -R main push http://localhost:$HGPORT2/ -r e7ec4e813ba6
   pushing to http://localhost:$HGPORT2/
   searching for changes
-  abort: missing support for "'test:unknown'"
+  abort: missing support for test:unknown
   [255]
 
 Doing the actual push: race
 
   $ cat << EOF >> $HGRCPATH
   > [failpush]
   > reason = race
   > EOF
 
   $ hg -R main push other -r e7ec4e813ba6
   pushing to other
   searching for changes
   abort: push failed:
   'repository changed while pushing - please try again'
   [255]
 
   $ hg -R main push ssh://user@dummy/other -r e7ec4e813ba6
   pushing to ssh://user@dummy/other
   searching for changes
   abort: push failed:
   'repository changed while pushing - please try again'
   [255]
 
   $ hg -R main push http://localhost:$HGPORT2/ -r e7ec4e813ba6
   pushing to http://localhost:$HGPORT2/
   searching for changes
   abort: push failed:
   'repository changed while pushing - please try again'
   [255]
 
 Doing the actual push: hook abort
 
   $ cat << EOF >> $HGRCPATH
   > [failpush]
   > reason =
   > [hooks]
   > b2x-pretransactionclose.failpush = false
   > EOF
 
   $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS
   $ hg -R other serve -p $HGPORT2 -d --pid-file=other.pid -E other-error.log
   $ cat other.pid >> $DAEMON_PIDS
 
   $ hg -R main push other -r e7ec4e813ba6
   pushing to other
   searching for changes
   transaction abort!
   rollback completed
   abort: b2x-pretransactionclose.failpush hook exited with status 1
   [255]
 
   $ hg -R main push ssh://user@dummy/other -r e7ec4e813ba6
   pushing to ssh://user@dummy/other
   searching for changes
   abort: b2x-pretransactionclose.failpush hook exited with status 1
   remote: transaction abort!
   remote: rollback completed
   [255]
 
   $ hg -R main push http://localhost:$HGPORT2/ -r e7ec4e813ba6
   pushing to http://localhost:$HGPORT2/
   searching for changes
   abort: b2x-pretransactionclose.failpush hook exited with status 1
   [255]