largefiles: define norepo in command decorator

hgext/largefiles/__init__.py

@@ -1,130 +1,128 b''
 # Copyright 2009-2010 Gregory P. Ward
 # Copyright 2009-2010 Intelerad Medical Systems Incorporated
 # Copyright 2010-2011 Fog Creek Software
 # Copyright 2010-2011 Unity Technologies
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 '''track large binary files
 
 Large binary files tend to be not very compressible, not very
 diffable, and not at all mergeable. Such files are not handled
 efficiently by Mercurial's storage format (revlog), which is based on
 compressed binary deltas; storing large binary files as regular
 Mercurial files wastes bandwidth and disk space and increases
 Mercurial's memory usage. The largefiles extension addresses these
 problems by adding a centralized client-server layer on top of
 Mercurial: largefiles live in a *central store* out on the network
 somewhere, and you only fetch the revisions that you need when you
 need them.
 
 largefiles works by maintaining a "standin file" in .hglf/ for each
 largefile. The standins are small (41 bytes: an SHA-1 hash plus
 newline) and are tracked by Mercurial. Largefile revisions are
 identified by the SHA-1 hash of their contents, which is written to
 the standin. largefiles uses that revision ID to get/put largefile
 revisions from/to the central store. This saves both disk space and
 bandwidth, since you don't need to retrieve all historical revisions
 of large files when you clone or pull.
 
 To start a new repository or add new large binary files, just add
 --large to your :hg:`add` command. For example::
 
   $ dd if=/dev/urandom of=randomdata count=2000
   $ hg add --large randomdata
   $ hg commit -m 'add randomdata as a largefile'
 
 When you push a changeset that adds/modifies largefiles to a remote
 repository, its largefile revisions will be uploaded along with it.
 Note that the remote Mercurial must also have the largefiles extension
 enabled for this to work.
 
 When you pull a changeset that affects largefiles from a remote
 repository, the largefiles for the changeset will by default not be
 pulled down. However, when you update to such a revision, any
 largefiles needed by that revision are downloaded and cached (if
 they have never been downloaded before). One way to pull largefiles
 when pulling is thus to use --update, which will update your working
 copy to the latest pulled revision (and thereby downloading any new
 largefiles).
 
 If you want to pull largefiles you don't need for update yet, then
 you can use pull with the `--lfrev` option or the :hg:`lfpull` command.
 
 If you know you are pulling from a non-default location and want to
 download all the largefiles that correspond to the new changesets at
 the same time, then you can pull with `--lfrev "pulled()"`.
 
 If you just want to ensure that you will have the largefiles needed to
 merge or rebase with new heads that you are pulling, then you can pull
 with `--lfrev "head(pulled())"` flag to pre-emptively download any largefiles
 that are new in the heads you are pulling.
 
 Keep in mind that network access may now be required to update to
 changesets that you have not previously updated to. The nature of the
 largefiles extension means that updating is no longer guaranteed to
 be a local-only operation.
 
 If you already have large files tracked by Mercurial without the
 largefiles extension, you will need to convert your repository in
 order to benefit from largefiles. This is done with the
 :hg:`lfconvert` command::
 
   $ hg lfconvert --size 10 oldrepo newrepo
 
 In repositories that already have largefiles in them, any new file
 over 10MB will automatically be added as a largefile. To change this
 threshold, set ``largefiles.minsize`` in your Mercurial config file
 to the minimum size in megabytes to track as a largefile, or use the
 --lfsize option to the add command (also in megabytes)::
 
   [largefiles]
   minsize = 2
 
   $ hg add --lfsize 2
 
 The ``largefiles.patterns`` config option allows you to specify a list
 of filename patterns (see :hg:`help patterns`) that should always be
 tracked as largefiles::
 
   [largefiles]
   patterns =
     *.jpg
     re:.*\.(png|bmp)$
     library.zip
     content/audio/*
 
 Files that match one of these patterns will be added as largefiles
 regardless of their size.
 
 The ``largefiles.minsize`` and ``largefiles.patterns`` config options
 will be ignored for any repositories not already containing a
 largefile. To add the first largefile to a repository, you must
 explicitly do so with the --large flag passed to the :hg:`add`
 command.
 '''
 
-from mercurial import commands, hg, localrepo
+from mercurial import hg, localrepo
 
 import lfcommands
 import proto
 import reposetup
 import uisetup as uisetupmod
 
 testedwith = 'internal'
 
 reposetup = reposetup.reposetup
 
 def featuresetup(ui, supported):
     # don't die on seeing a repo with the largefiles requirement
     supported |= set(['largefiles'])
 
 def uisetup(ui):
     localrepo.localrepository.featuresetupfuncs.add(featuresetup)
     hg.wirepeersetupfuncs.append(proto.wirereposetup)
     uisetupmod.uisetup(ui)
 
-commands.norepo += " lfconvert"
-
 cmdtable = lfcommands.cmdtable

hgext/largefiles/lfcommands.py

@@ -1,572 +1,573 b''
 # Copyright 2009-2010 Gregory P. Ward
 # Copyright 2009-2010 Intelerad Medical Systems Incorporated
 # Copyright 2010-2011 Fog Creek Software
 # Copyright 2010-2011 Unity Technologies
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 '''High-level command function for lfconvert, plus the cmdtable.'''
 
 import os, errno
 import shutil
 
 from mercurial import util, match as match_, hg, node, context, error, \
     cmdutil, scmutil, commands
 from mercurial.i18n import _
 from mercurial.lock import release
 
 import lfutil
 import basestore
 
 # -- Commands ----------------------------------------------------------
 
 cmdtable = {}
 command = cmdutil.command(cmdtable)
 
 commands.inferrepo += " lfconvert"
 
 @command('lfconvert',
     [('s', 'size', '',
       _('minimum size (MB) for files to be converted as largefiles'), 'SIZE'),
     ('', 'to-normal', False,
      _('convert from a largefiles repo to a normal repo')),
     ],
-    _('hg lfconvert SOURCE DEST [FILE ...]'))
+    _('hg lfconvert SOURCE DEST [FILE ...]'),
+    norepo=True)
 def lfconvert(ui, src, dest, *pats, **opts):
     '''convert a normal repository to a largefiles repository
 
     Convert repository SOURCE to a new repository DEST, identical to
     SOURCE except that certain files will be converted as largefiles:
     specifically, any file that matches any PATTERN *or* whose size is
     above the minimum size threshold is converted as a largefile. The
     size used to determine whether or not to track a file as a
     largefile is the size of the first version of the file. The
     minimum size can be specified either with --size or in
     configuration as ``largefiles.size``.
 
     After running this command you will need to make sure that
     largefiles is enabled anywhere you intend to push the new
     repository.
 
     Use --to-normal to convert largefiles back to normal files; after
     this, the DEST repository can be used without largefiles at all.'''
 
     if opts['to_normal']:
         tolfile = False
     else:
         tolfile = True
         size = lfutil.getminsize(ui, True, opts.get('size'), default=None)
 
     if not hg.islocal(src):
         raise util.Abort(_('%s is not a local Mercurial repo') % src)
     if not hg.islocal(dest):
         raise util.Abort(_('%s is not a local Mercurial repo') % dest)
 
     rsrc = hg.repository(ui, src)
     ui.status(_('initializing destination %s\n') % dest)
     rdst = hg.repository(ui, dest, create=True)
 
     success = False
     dstwlock = dstlock = None
     try:
         # Lock destination to prevent modification while it is converted to.
         # Don't need to lock src because we are just reading from its history
         # which can't change.
         dstwlock = rdst.wlock()
         dstlock = rdst.lock()
 
         # Get a list of all changesets in the source.  The easy way to do this
         # is to simply walk the changelog, using changelog.nodesbetween().
         # Take a look at mercurial/revlog.py:639 for more details.
         # Use a generator instead of a list to decrease memory usage
         ctxs = (rsrc[ctx] for ctx in rsrc.changelog.nodesbetween(None,
             rsrc.heads())[0])
         revmap = {node.nullid: node.nullid}
         if tolfile:
             lfiles = set()
             normalfiles = set()
             if not pats:
                 pats = ui.configlist(lfutil.longname, 'patterns', default=[])
             if pats:
                 matcher = match_.match(rsrc.root, '', list(pats))
             else:
                 matcher = None
 
             lfiletohash = {}
             for ctx in ctxs:
                 ui.progress(_('converting revisions'), ctx.rev(),
                     unit=_('revision'), total=rsrc['tip'].rev())
                 _lfconvert_addchangeset(rsrc, rdst, ctx, revmap,
                     lfiles, normalfiles, matcher, size, lfiletohash)
             ui.progress(_('converting revisions'), None)
 
             if os.path.exists(rdst.wjoin(lfutil.shortname)):
                 shutil.rmtree(rdst.wjoin(lfutil.shortname))
 
             for f in lfiletohash.keys():
                 if os.path.isfile(rdst.wjoin(f)):
                     os.unlink(rdst.wjoin(f))
                 try:
                     os.removedirs(os.path.dirname(rdst.wjoin(f)))
                 except OSError:
                     pass
 
             # If there were any files converted to largefiles, add largefiles
             # to the destination repository's requirements.
             if lfiles:
                 rdst.requirements.add('largefiles')
                 rdst._writerequirements()
         else:
             for ctx in ctxs:
                 ui.progress(_('converting revisions'), ctx.rev(),
                     unit=_('revision'), total=rsrc['tip'].rev())
                 _addchangeset(ui, rsrc, rdst, ctx, revmap)
 
             ui.progress(_('converting revisions'), None)
         success = True
     finally:
         rdst.dirstate.clear()
         release(dstlock, dstwlock)
         if not success:
             # we failed, remove the new directory
             shutil.rmtree(rdst.root)
 
 def _addchangeset(ui, rsrc, rdst, ctx, revmap):
     # Convert src parents to dst parents
     parents = _convertparents(ctx, revmap)
 
     # Generate list of changed files
     files = _getchangedfiles(ctx, parents)
 
     def getfilectx(repo, memctx, f):
         if lfutil.standin(f) in files:
             # if the file isn't in the manifest then it was removed
             # or renamed, raise IOError to indicate this
             try:
                 fctx = ctx.filectx(lfutil.standin(f))
             except error.LookupError:
                 raise IOError
             renamed = fctx.renamed()
             if renamed:
                 renamed = lfutil.splitstandin(renamed[0])
 
             hash = fctx.data().strip()
             path = lfutil.findfile(rsrc, hash)
 
             # If one file is missing, likely all files from this rev are
             if path is None:
                 cachelfiles(ui, rsrc, ctx.node())
                 path = lfutil.findfile(rsrc, hash)
 
                 if path is None:
                     raise util.Abort(
                         _("missing largefile \'%s\' from revision %s")
                          % (f, node.hex(ctx.node())))
 
             data = ''
             fd = None
             try:
                 fd = open(path, 'rb')
                 data = fd.read()
             finally:
                 if fd:
                     fd.close()
             return context.memfilectx(repo, f, data, 'l' in fctx.flags(),
                                       'x' in fctx.flags(), renamed)
         else:
             return _getnormalcontext(repo, ctx, f, revmap)
 
     dstfiles = []
     for file in files:
         if lfutil.isstandin(file):
             dstfiles.append(lfutil.splitstandin(file))
         else:
             dstfiles.append(file)
     # Commit
     _commitcontext(rdst, parents, ctx, dstfiles, getfilectx, revmap)
 
 def _lfconvert_addchangeset(rsrc, rdst, ctx, revmap, lfiles, normalfiles,
         matcher, size, lfiletohash):
     # Convert src parents to dst parents
     parents = _convertparents(ctx, revmap)
 
     # Generate list of changed files
     files = _getchangedfiles(ctx, parents)
 
     dstfiles = []
     for f in files:
         if f not in lfiles and f not in normalfiles:
             islfile = _islfile(f, ctx, matcher, size)
             # If this file was renamed or copied then copy
             # the largefile-ness of its predecessor
             if f in ctx.manifest():
                 fctx = ctx.filectx(f)
                 renamed = fctx.renamed()
                 renamedlfile = renamed and renamed[0] in lfiles
                 islfile |= renamedlfile
                 if 'l' in fctx.flags():
                     if renamedlfile:
                         raise util.Abort(
                             _('renamed/copied largefile %s becomes symlink')
                             % f)
                     islfile = False
             if islfile:
                 lfiles.add(f)
             else:
                 normalfiles.add(f)
 
         if f in lfiles:
             dstfiles.append(lfutil.standin(f))
             # largefile in manifest if it has not been removed/renamed
             if f in ctx.manifest():
                 fctx = ctx.filectx(f)
                 if 'l' in fctx.flags():
                     renamed = fctx.renamed()
                     if renamed and renamed[0] in lfiles:
                         raise util.Abort(_('largefile %s becomes symlink') % f)
 
                 # largefile was modified, update standins
                 m = util.sha1('')
                 m.update(ctx[f].data())
                 hash = m.hexdigest()
                 if f not in lfiletohash or lfiletohash[f] != hash:
                     rdst.wwrite(f, ctx[f].data(), ctx[f].flags())
                     executable = 'x' in ctx[f].flags()
                     lfutil.writestandin(rdst, lfutil.standin(f), hash,
                         executable)
                     lfiletohash[f] = hash
         else:
             # normal file
             dstfiles.append(f)
 
     def getfilectx(repo, memctx, f):
         if lfutil.isstandin(f):
             # if the file isn't in the manifest then it was removed
             # or renamed, raise IOError to indicate this
             srcfname = lfutil.splitstandin(f)
             try:
                 fctx = ctx.filectx(srcfname)
             except error.LookupError:
                 raise IOError
             renamed = fctx.renamed()
             if renamed:
                 # standin is always a largefile because largefile-ness
                 # doesn't change after rename or copy
                 renamed = lfutil.standin(renamed[0])
 
             return context.memfilectx(repo, f, lfiletohash[srcfname] + '\n',
                                       'l' in fctx.flags(), 'x' in fctx.flags(),
                                       renamed)
         else:
             return _getnormalcontext(repo, ctx, f, revmap)
 
     # Commit
     _commitcontext(rdst, parents, ctx, dstfiles, getfilectx, revmap)
 
 def _commitcontext(rdst, parents, ctx, dstfiles, getfilectx, revmap):
     mctx = context.memctx(rdst, parents, ctx.description(), dstfiles,
                           getfilectx, ctx.user(), ctx.date(), ctx.extra())
     ret = rdst.commitctx(mctx)
     rdst.setparents(ret)
     revmap[ctx.node()] = rdst.changelog.tip()
 
 # Generate list of changed files
 def _getchangedfiles(ctx, parents):
     files = set(ctx.files())
     if node.nullid not in parents:
         mc = ctx.manifest()
         mp1 = ctx.parents()[0].manifest()
         mp2 = ctx.parents()[1].manifest()
         files |= (set(mp1) | set(mp2)) - set(mc)
         for f in mc:
             if mc[f] != mp1.get(f, None) or mc[f] != mp2.get(f, None):
                 files.add(f)
     return files
 
 # Convert src parents to dst parents
 def _convertparents(ctx, revmap):
     parents = []
     for p in ctx.parents():
         parents.append(revmap[p.node()])
     while len(parents) < 2:
         parents.append(node.nullid)
     return parents
 
 # Get memfilectx for a normal file
 def _getnormalcontext(repo, ctx, f, revmap):
     try:
         fctx = ctx.filectx(f)
     except error.LookupError:
         raise IOError
     renamed = fctx.renamed()
     if renamed:
         renamed = renamed[0]
 
     data = fctx.data()
     if f == '.hgtags':
         data = _converttags (repo.ui, revmap, data)
     return context.memfilectx(repo, f, data, 'l' in fctx.flags(),
                               'x' in fctx.flags(), renamed)
 
 # Remap tag data using a revision map
 def _converttags(ui, revmap, data):
     newdata = []
     for line in data.splitlines():
         try:
             id, name = line.split(' ', 1)
         except ValueError:
             ui.warn(_('skipping incorrectly formatted tag %s\n')
                 % line)
             continue
         try:
             newid = node.bin(id)
         except TypeError:
             ui.warn(_('skipping incorrectly formatted id %s\n')
                 % id)
             continue
         try:
             newdata.append('%s %s\n' % (node.hex(revmap[newid]),
                 name))
         except KeyError:
             ui.warn(_('no mapping for id %s\n') % id)
             continue
     return ''.join(newdata)
 
 def _islfile(file, ctx, matcher, size):
     '''Return true if file should be considered a largefile, i.e.
     matcher matches it or it is larger than size.'''
     # never store special .hg* files as largefiles
     if file == '.hgtags' or file == '.hgignore' or file == '.hgsigs':
         return False
     if matcher and matcher(file):
         return True
     try:
         return ctx.filectx(file).size() >= size * 1024 * 1024
     except error.LookupError:
         return False
 
 def uploadlfiles(ui, rsrc, rdst, files):
     '''upload largefiles to the central store'''
 
     if not files:
         return
 
     store = basestore._openstore(rsrc, rdst, put=True)
 
     at = 0
     ui.debug("sending statlfile command for %d largefiles\n" % len(files))
     retval = store.exists(files)
     files = filter(lambda h: not retval[h], files)
     ui.debug("%d largefiles need to be uploaded\n" % len(files))
 
     for hash in files:
         ui.progress(_('uploading largefiles'), at, unit='largefile',
                     total=len(files))
         source = lfutil.findfile(rsrc, hash)
         if not source:
             raise util.Abort(_('largefile %s missing from store'
                                ' (needs to be uploaded)') % hash)
         # XXX check for errors here
         store.put(source, hash)
         at += 1
     ui.progress(_('uploading largefiles'), None)
 
 def verifylfiles(ui, repo, all=False, contents=False):
     '''Verify that every largefile revision in the current changeset
     exists in the central store.  With --contents, also verify that
     the contents of each local largefile file revision are correct (SHA-1 hash
     matches the revision ID).  With --all, check every changeset in
     this repository.'''
     if all:
         # Pass a list to the function rather than an iterator because we know a
         # list will work.
         revs = range(len(repo))
     else:
         revs = ['.']
 
     store = basestore._openstore(repo)
     return store.verify(revs, contents=contents)
 
 def cachelfiles(ui, repo, node, filelist=None):
     '''cachelfiles ensures that all largefiles needed by the specified revision
     are present in the repository's largefile cache.
 
     returns a tuple (cached, missing).  cached is the list of files downloaded
     by this operation; missing is the list of files that were needed but could
     not be found.'''
     lfiles = lfutil.listlfiles(repo, node)
     if filelist:
         lfiles = set(lfiles) & set(filelist)
     toget = []
 
     for lfile in lfiles:
         try:
             expectedhash = repo[node][lfutil.standin(lfile)].data().strip()
         except IOError, err:
             if err.errno == errno.ENOENT:
                 continue # node must be None and standin wasn't found in wctx
             raise
         if not lfutil.findfile(repo, expectedhash):
             toget.append((lfile, expectedhash))
 
     if toget:
         store = basestore._openstore(repo)
         ret = store.get(toget)
         return ret
 
     return ([], [])
 
 def downloadlfiles(ui, repo, rev=None):
     matchfn = scmutil.match(repo[None],
                             [repo.wjoin(lfutil.shortname)], {})
     def prepare(ctx, fns):
         pass
     totalsuccess = 0
     totalmissing = 0
     if rev != []: # walkchangerevs on empty list would return all revs
         for ctx in cmdutil.walkchangerevs(repo, matchfn, {'rev' : rev},
                                           prepare):
             success, missing = cachelfiles(ui, repo, ctx.node())
             totalsuccess += len(success)
             totalmissing += len(missing)
     ui.status(_("%d additional largefiles cached\n") % totalsuccess)
     if totalmissing > 0:
         ui.status(_("%d largefiles failed to download\n") % totalmissing)
     return totalsuccess, totalmissing
 
 def updatelfiles(ui, repo, filelist=None, printmessage=True):
     wlock = repo.wlock()
     try:
         lfdirstate = lfutil.openlfdirstate(ui, repo)
         lfiles = set(lfutil.listlfiles(repo)) | set(lfdirstate)
 
         if filelist is not None:
             lfiles = [f for f in lfiles if f in filelist]
 
         update = {}
         updated, removed = 0, 0
         for lfile in lfiles:
             abslfile = repo.wjoin(lfile)
             absstandin = repo.wjoin(lfutil.standin(lfile))
             if os.path.exists(absstandin):
                 if (os.path.exists(absstandin + '.orig') and
                     os.path.exists(abslfile)):
                     shutil.copyfile(abslfile, abslfile + '.orig')
                     util.unlinkpath(absstandin + '.orig')
                 expecthash = lfutil.readstandin(repo, lfile)
                 if (expecthash != '' and
                     (not os.path.exists(abslfile) or
                      expecthash != lfutil.hashfile(abslfile))):
                     if lfile not in repo[None]: # not switched to normal file
                         util.unlinkpath(abslfile, ignoremissing=True)
                     # use normallookup() to allocate entry in largefiles
                     # dirstate, because lack of it misleads
                     # lfilesrepo.status() into recognition that such cache
                     # missing files are REMOVED.
                     lfdirstate.normallookup(lfile)
                     update[lfile] = expecthash
             else:
                 # Remove lfiles for which the standin is deleted, unless the
                 # lfile is added to the repository again. This happens when a
                 # largefile is converted back to a normal file: the standin
                 # disappears, but a new (normal) file appears as the lfile.
                 if (os.path.exists(abslfile) and
                     repo.dirstate.normalize(lfile) not in repo[None]):
                     util.unlinkpath(abslfile)
                     removed += 1
 
         # largefile processing might be slow and be interrupted - be prepared
         lfdirstate.write()
 
         if lfiles:
             if printmessage:
                 ui.status(_('getting changed largefiles\n'))
             cachelfiles(ui, repo, None, lfiles)
 
         for lfile in lfiles:
             update1 = 0
 
             expecthash = update.get(lfile)
             if expecthash:
                 if not lfutil.copyfromcache(repo, expecthash, lfile):
                     # failed ... but already removed and set to normallookup
                     continue
                 # Synchronize largefile dirstate to the last modified
                 # time of the file
                 lfdirstate.normal(lfile)
                 update1 = 1
 
             # copy the state of largefile standin from the repository's
             # dirstate to its state in the lfdirstate.
             abslfile = repo.wjoin(lfile)
             absstandin = repo.wjoin(lfutil.standin(lfile))
             if os.path.exists(absstandin):
                 mode = os.stat(absstandin).st_mode
                 if mode != os.stat(abslfile).st_mode:
                     os.chmod(abslfile, mode)
                     update1 = 1
 
             updated += update1
 
             state = repo.dirstate[lfutil.standin(lfile)]
             if state == 'n':
                 # When rebasing, we need to synchronize the standin and the
                 # largefile, because otherwise the largefile will get reverted.
                 # But for commit's sake, we have to mark the file as unclean.
                 if getattr(repo, "_isrebasing", False):
                     lfdirstate.normallookup(lfile)
                 else:
                     lfdirstate.normal(lfile)
             elif state == 'r':
                 lfdirstate.remove(lfile)
             elif state == 'a':
                 lfdirstate.add(lfile)
             elif state == '?':
                 lfdirstate.drop(lfile)
 
         lfdirstate.write()
         if printmessage and lfiles:
             ui.status(_('%d largefiles updated, %d removed\n') % (updated,
                 removed))
     finally:
         wlock.release()
 
 @command('lfpull',
     [('r', 'rev', [], _('pull largefiles for these revisions'))
     ] + commands.remoteopts,
     _('-r REV... [-e CMD] [--remotecmd CMD] [SOURCE]'))
 def lfpull(ui, repo, source="default", **opts):
     """pull largefiles for the specified revisions from the specified source
 
     Pull largefiles that are referenced from local changesets but missing
     locally, pulling from a remote repository to the local cache.
 
     If SOURCE is omitted, the 'default' path will be used.
     See :hg:`help urls` for more information.
 
     .. container:: verbose
 
       Some examples:
 
       - pull largefiles for all branch heads::
 
           hg lfpull -r "head() and not closed()"
 
       - pull largefiles on the default branch::
 
           hg lfpull -r "branch(default)"
     """
     repo.lfpullsource = source
 
     revs = opts.get('rev', [])
     if not revs:
         raise util.Abort(_('no revisions specified'))
     revs = scmutil.revrange(repo, revs)
 
     numcached = 0
     for rev in revs:
         ui.note(_('pulling largefiles for revision %s\n') % rev)
         (cached, missing) = cachelfiles(ui, repo, rev)
         numcached += len(cached)
     ui.status(_("%d largefiles cached\n") % numcached)