tests: use `f --newer` instead of `stat -c` in test-fix.t

Also increase sleep to two seconds so this test will likely pass on FAT32.

Differential Revision: https://phab.mercurial-scm.org/D3252

tests/test-fix.t

@@ -1,1024 +1,1024 b''
 A script that implements uppercasing of specific lines in a file. This
 approximates the behavior of code formatters well enough for our tests.
 
   $ UPPERCASEPY="$TESTTMP/uppercase.py"
   $ cat > $UPPERCASEPY <<EOF
   > import sys
   > from mercurial.utils.procutil import setbinary
   > setbinary(sys.stdin)
   > setbinary(sys.stdout)
   > lines = set()
   > for arg in sys.argv[1:]:
   >   if arg == 'all':
   >     sys.stdout.write(sys.stdin.read().upper())
   >     sys.exit(0)
   >   else:
   >     first, last = arg.split('-')
   >     lines.update(range(int(first), int(last) + 1))
   > for i, line in enumerate(sys.stdin.readlines()):
   >   if i + 1 in lines:
   >     sys.stdout.write(line.upper())
   >   else:
   >     sys.stdout.write(line)
   > EOF
   $ TESTLINES="foo\nbar\nbaz\nqux\n"
   $ printf $TESTLINES | $PYTHON $UPPERCASEPY
   foo
   bar
   baz
   qux
   $ printf $TESTLINES | $PYTHON $UPPERCASEPY all
   FOO
   BAR
   BAZ
   QUX
   $ printf $TESTLINES | $PYTHON $UPPERCASEPY 1-1
   FOO
   bar
   baz
   qux
   $ printf $TESTLINES | $PYTHON $UPPERCASEPY 1-2
   FOO
   BAR
   baz
   qux
   $ printf $TESTLINES | $PYTHON $UPPERCASEPY 2-3
   foo
   BAR
   BAZ
   qux
   $ printf $TESTLINES | $PYTHON $UPPERCASEPY 2-2 4-4
   foo
   BAR
   baz
   QUX
 
 Set up the config with two simple fixers: one that fixes specific line ranges,
 and one that always fixes the whole file. They both "fix" files by converting
 letters to uppercase. They use different file extensions, so each test case can
 choose which behavior to use by naming files.
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > fix =
   > [experimental]
   > evolution.createmarkers=True
   > evolution.allowunstable=True
   > [fix]
   > uppercase-whole-file:command=$PYTHON $UPPERCASEPY all
   > uppercase-whole-file:fileset=set:**.whole
   > uppercase-changed-lines:command=$PYTHON $UPPERCASEPY
   > uppercase-changed-lines:linerange={first}-{last}
   > uppercase-changed-lines:fileset=set:**.changed
   > EOF
 
 Help text for fix.
 
   $ hg help fix
   hg fix [OPTION]... [FILE]...
   
   rewrite file content in changesets or working directory
   
       Runs any configured tools to fix the content of files. Only affects files
       with changes, unless file arguments are provided. Only affects changed
       lines of files, unless the --whole flag is used. Some tools may always
       affect the whole file regardless of --whole.
   
       If revisions are specified with --rev, those revisions will be checked,
       and they may be replaced with new revisions that have fixed file content.
       It is desirable to specify all descendants of each specified revision, so
       that the fixes propagate to the descendants. If all descendants are fixed
       at the same time, no merging, rebasing, or evolution will be required.
   
       If --working-dir is used, files with uncommitted changes in the working
       copy will be fixed. If the checked-out revision is also fixed, the working
       directory will update to the replacement revision.
   
       When determining what lines of each file to fix at each revision, the
       whole set of revisions being fixed is considered, so that fixes to earlier
       revisions are not forgotten in later ones. The --base flag can be used to
       override this default behavior, though it is not usually desirable to do
       so.
   
   (use 'hg help -e fix' to show help for the fix extension)
   
   options ([+] can be repeated):
   
       --base REV [+] revisions to diff against (overrides automatic selection,
                      and applies to every revision being fixed)
    -r --rev REV [+]  revisions to fix
    -w --working-dir  fix the working directory
       --whole        always fix every line of a file
   
   (some details hidden, use --verbose to show complete help)
 
   $ hg help -e fix
   fix extension - rewrite file content in changesets or working copy
   (EXPERIMENTAL)
   
   Provides a command that runs configured tools on the contents of modified
   files, writing back any fixes to the working copy or replacing changesets.
   
   Here is an example configuration that causes 'hg fix' to apply automatic
   formatting fixes to modified lines in C++ code:
   
     [fix]
     clang-format:command=clang-format --assume-filename={rootpath}
     clang-format:linerange=--lines={first}:{last}
     clang-format:fileset=set:**.cpp or **.hpp
   
   The :command suboption forms the first part of the shell command that will be
   used to fix a file. The content of the file is passed on standard input, and
   the fixed file content is expected on standard output. If there is any output
   on standard error, the file will not be affected. Some values may be
   substituted into the command:
   
     {rootpath}  The path of the file being fixed, relative to the repo root
     {basename}  The name of the file being fixed, without the directory path
   
   If the :linerange suboption is set, the tool will only be run if there are
   changed lines in a file. The value of this suboption is appended to the shell
   command once for every range of changed lines in the file. Some values may be
   substituted into the command:
   
     {first}   The 1-based line number of the first line in the modified range
     {last}    The 1-based line number of the last line in the modified range
   
   The :fileset suboption determines which files will be passed through each
   configured tool. See 'hg help fileset' for possible values. If there are file
   arguments to 'hg fix', the intersection of these filesets is used.
   
   There is also a configurable limit for the maximum size of file that will be
   processed by 'hg fix':
   
     [fix]
     maxfilesize=2MB
   
   list of commands:
   
    fix           rewrite file content in changesets or working directory
   
   (use 'hg help -v -e fix' to show built-in aliases and global options)
 
 There is no default behavior in the absence of --rev and --working-dir.
 
   $ hg init badusage
   $ cd badusage
 
   $ hg fix
   abort: no changesets specified
   (use --rev or --working-dir)
   [255]
   $ hg fix --whole
   abort: no changesets specified
   (use --rev or --working-dir)
   [255]
   $ hg fix --base 0
   abort: no changesets specified
   (use --rev or --working-dir)
   [255]
 
 Fixing a public revision isn't allowed. It should abort early enough that
 nothing happens, even to the working directory.
 
   $ printf "hello\n" > hello.whole
   $ hg commit -Aqm "hello"
   $ hg phase -r 0 --public
   $ hg fix -r 0
   abort: can't fix immutable changeset 0:6470986d2e7b
   [255]
   $ hg fix -r 0 --working-dir
   abort: can't fix immutable changeset 0:6470986d2e7b
   [255]
   $ hg cat -r tip hello.whole
   hello
   $ cat hello.whole
   hello
 
   $ cd ..
 
 Fixing a clean working directory should do nothing. Even the --whole flag
 shouldn't cause any clean files to be fixed. Specifying a clean file explicitly
 should only fix it if the fixer always fixes the whole file. The combination of
 an explicit filename and --whole should format the entire file regardless.
 
   $ hg init fixcleanwdir
   $ cd fixcleanwdir
 
   $ printf "hello\n" > hello.changed
   $ printf "world\n" > hello.whole
   $ hg commit -Aqm "foo"
   $ hg fix --working-dir
   $ hg diff
   $ hg fix --working-dir --whole
   $ hg diff
   $ hg fix --working-dir *
   $ cat *
   hello
   WORLD
   $ hg revert --all --no-backup
   reverting hello.whole
   $ hg fix --working-dir * --whole
   $ cat *
   HELLO
   WORLD
 
 The same ideas apply to fixing a revision, so we create a revision that doesn't
 modify either of the files in question and try fixing it. This also tests that
 we ignore a file that doesn't match any configured fixer.
 
   $ hg revert --all --no-backup
   reverting hello.changed
   reverting hello.whole
   $ printf "unimportant\n" > some.file
   $ hg commit -Aqm "some other file"
 
   $ hg fix -r .
   $ hg cat -r tip *
   hello
   world
   unimportant
   $ hg fix -r . --whole
   $ hg cat -r tip *
   hello
   world
   unimportant
   $ hg fix -r . *
   $ hg cat -r tip *
   hello
   WORLD
   unimportant
   $ hg fix -r . * --whole --config experimental.evolution.allowdivergence=true
   2 new content-divergent changesets
   $ hg cat -r tip *
   HELLO
   WORLD
   unimportant
 
   $ cd ..
 
 Fixing the working directory should still work if there are no revisions.
 
   $ hg init norevisions
   $ cd norevisions
 
   $ printf "something\n" > something.whole
   $ hg add
   adding something.whole
   $ hg fix --working-dir
   $ cat something.whole
   SOMETHING
 
   $ cd ..
 
 Test the effect of fixing the working directory for each possible status, with
 and without providing explicit file arguments.
 
   $ hg init implicitlyfixstatus
   $ cd implicitlyfixstatus
 
   $ printf "modified\n" > modified.whole
   $ printf "removed\n" > removed.whole
   $ printf "deleted\n" > deleted.whole
   $ printf "clean\n" > clean.whole
   $ printf "ignored.whole" > .hgignore
   $ hg commit -Aqm "stuff"
 
   $ printf "modified!!!\n" > modified.whole
   $ printf "unknown\n" > unknown.whole
   $ printf "ignored\n" > ignored.whole
   $ printf "added\n" > added.whole
   $ hg add added.whole
   $ hg remove removed.whole
   $ rm deleted.whole
 
   $ hg status --all
   M modified.whole
   A added.whole
   R removed.whole
   ! deleted.whole
   ? unknown.whole
   I ignored.whole
   C .hgignore
   C clean.whole
 
   $ hg fix --working-dir
 
   $ hg status --all
   M modified.whole
   A added.whole
   R removed.whole
   ! deleted.whole
   ? unknown.whole
   I ignored.whole
   C .hgignore
   C clean.whole
 
   $ cat *.whole
   ADDED
   clean
   ignored
   MODIFIED!!!
   unknown
 
   $ printf "modified!!!\n" > modified.whole
   $ printf "added\n" > added.whole
   $ hg fix --working-dir *.whole
 
   $ hg status --all
   M clean.whole
   M modified.whole
   A added.whole
   R removed.whole
   ! deleted.whole
   ? unknown.whole
   I ignored.whole
   C .hgignore
 
 It would be better if this also fixed the unknown file.
   $ cat *.whole
   ADDED
   CLEAN
   ignored
   MODIFIED!!!
   unknown
 
   $ cd ..
 
 Test that incremental fixing works on files with additions, deletions, and
 changes in multiple line ranges. Note that deletions do not generally cause
 neighboring lines to be fixed, so we don't return a line range for purely
 deleted sections. In the future we should support a :deletion config that
 allows fixers to know where deletions are located.
 
   $ hg init incrementalfixedlines
   $ cd incrementalfixedlines
 
   $ printf "a\nb\nc\nd\ne\nf\ng\n" > foo.txt
   $ hg commit -Aqm "foo"
   $ printf "zz\na\nc\ndd\nee\nff\nf\ngg\n" > foo.txt
 
   $ hg --config "fix.fail:command=echo" \
   >    --config "fix.fail:linerange={first}:{last}" \
   >    --config "fix.fail:fileset=foo.txt" \
   >    fix --working-dir
   $ cat foo.txt
   1:1 4:6 8:8
 
   $ cd ..
 
 Test that --whole fixes all lines regardless of the diffs present.
 
   $ hg init wholeignoresdiffs
   $ cd wholeignoresdiffs
 
   $ printf "a\nb\nc\nd\ne\nf\ng\n" > foo.changed
   $ hg commit -Aqm "foo"
   $ printf "zz\na\nc\ndd\nee\nff\nf\ngg\n" > foo.changed
   $ hg fix --working-dir --whole
   $ cat foo.changed
   ZZ
   A
   C
   DD
   EE
   FF
   F
   GG
 
   $ cd ..
 
 We should do nothing with symlinks, and their targets should be unaffected. Any
 other behavior would be more complicated to implement and harder to document.
 
 #if symlink
   $ hg init dontmesswithsymlinks
   $ cd dontmesswithsymlinks
 
   $ printf "hello\n" > hello.whole
   $ ln -s hello.whole hellolink
   $ hg add
   adding hello.whole
   adding hellolink
   $ hg fix --working-dir hellolink
   $ hg status
   A hello.whole
   A hellolink
 
   $ cd ..
 #endif
 
 We should allow fixers to run on binary files, even though this doesn't sound
 like a common use case. There's not much benefit to disallowing it, and users
 can add "and not binary()" to their filesets if needed. The Mercurial
 philosophy is generally to not handle binary files specially anyway.
 
   $ hg init cantouchbinaryfiles
   $ cd cantouchbinaryfiles
 
   $ printf "hello\0\n" > hello.whole
   $ hg add
   adding hello.whole
   $ hg fix --working-dir 'set:binary()'
   $ cat hello.whole
   HELLO\x00 (esc)
 
   $ cd ..
 
 We have a config for the maximum size of file we will attempt to fix. This can
 be helpful to avoid running unsuspecting fixer tools on huge inputs, which
 could happen by accident without a well considered configuration. A more
 precise configuration could use the size() fileset function if one global limit
 is undesired.
 
   $ hg init maxfilesize
   $ cd maxfilesize
 
   $ printf "this file is huge\n" > hello.whole
   $ hg add
   adding hello.whole
   $ hg --config fix.maxfilesize=10 fix --working-dir
   ignoring file larger than 10 bytes: hello.whole
   $ cat hello.whole
   this file is huge
 
   $ cd ..
 
 If we specify a file to fix, other files should be left alone, even if they
 have changes.
 
   $ hg init fixonlywhatitellyouto
   $ cd fixonlywhatitellyouto
 
   $ printf "fix me!\n" > fixme.whole
   $ printf "not me.\n" > notme.whole
   $ hg add
   adding fixme.whole
   adding notme.whole
   $ hg fix --working-dir fixme.whole
   $ cat *.whole
   FIX ME!
   not me.
 
   $ cd ..
 
 Specifying a directory name should fix all its files and subdirectories.
 
   $ hg init fixdirectory
   $ cd fixdirectory
 
   $ mkdir -p dir1/dir2
   $ printf "foo\n" > foo.whole
   $ printf "bar\n" > dir1/bar.whole
   $ printf "baz\n" > dir1/dir2/baz.whole
   $ hg add
   adding dir1/bar.whole
   adding dir1/dir2/baz.whole
   adding foo.whole
   $ hg fix --working-dir dir1
   $ cat foo.whole dir1/bar.whole dir1/dir2/baz.whole
   foo
   BAR
   BAZ
 
   $ cd ..
 
 Fixing a file in the working directory that needs no fixes should not actually
 write back to the file, so for example the mtime shouldn't change.
 
   $ hg init donttouchunfixedfiles
   $ cd donttouchunfixedfiles
 
   $ printf "NO FIX NEEDED\n" > foo.whole
   $ hg add
   adding foo.whole
-  $ OLD_MTIME=`stat -c %Y foo.whole`
-  $ sleep 1 # mtime has a resolution of one second.
+  $ cp foo.whole foo.whole.orig
+  $ sleep 2 # mtime has a resolution of one or two seconds.
   $ hg fix --working-dir
-  $ NEW_MTIME=`stat -c %Y foo.whole`
-  $ test $OLD_MTIME = $NEW_MTIME
+  $ f foo.whole --newer foo.whole.orig
+  foo.whole: older than foo.whole.orig
 
   $ cd ..
 
 When a fixer prints to stderr, we assume that it has failed. We should show the
 error messages to the user, and we should not let the failing fixer affect the
 file it was fixing (many code formatters might emit error messages on stderr
 and nothing on stdout, which would cause us the clear the file). We show the
 user which fixer failed and which revision, but we assume that the fixer will
 print the filename if it is relevant.
 
   $ hg init showstderr
   $ cd showstderr
 
   $ printf "hello\n" > hello.txt
   $ hg add
   adding hello.txt
   $ hg --config "fix.fail:command=printf 'HELLO\n' ; \
   >                               printf '{rootpath}: some\nerror' >&2" \
   >    --config "fix.fail:fileset=hello.txt" \
   >    fix --working-dir
   [wdir] fail: hello.txt: some
   [wdir] fail: error
   $ cat hello.txt
   hello
 
   $ cd ..
 
 Fixing the working directory and its parent revision at the same time should
 check out the replacement revision for the parent. This prevents any new
 uncommitted changes from appearing. We test this for a clean working directory
 and a dirty one. In both cases, all lines/files changed since the grandparent
 will be fixed. The grandparent is the "baserev" for both the parent and the
 working copy.
 
   $ hg init fixdotandcleanwdir
   $ cd fixdotandcleanwdir
 
   $ printf "hello\n" > hello.whole
   $ printf "world\n" > world.whole
   $ hg commit -Aqm "the parent commit"
 
   $ hg parents --template '{rev} {desc}\n'
   0 the parent commit
   $ hg fix --working-dir -r .
   $ hg parents --template '{rev} {desc}\n'
   1 the parent commit
   $ hg cat -r . *.whole
   HELLO
   WORLD
   $ cat *.whole
   HELLO
   WORLD
   $ hg status
 
   $ cd ..
 
 Same test with a dirty working copy.
 
   $ hg init fixdotanddirtywdir
   $ cd fixdotanddirtywdir
 
   $ printf "hello\n" > hello.whole
   $ printf "world\n" > world.whole
   $ hg commit -Aqm "the parent commit"
 
   $ printf "hello,\n" > hello.whole
   $ printf "world!\n" > world.whole
 
   $ hg parents --template '{rev} {desc}\n'
   0 the parent commit
   $ hg fix --working-dir -r .
   $ hg parents --template '{rev} {desc}\n'
   1 the parent commit
   $ hg cat -r . *.whole
   HELLO
   WORLD
   $ cat *.whole
   HELLO,
   WORLD!
   $ hg status
   M hello.whole
   M world.whole
 
   $ cd ..
 
 When we have a chain of commits that change mutually exclusive lines of code,
 we should be able to do incremental fixing that causes each commit in the chain
 to include fixes made to the previous commits. This prevents children from
 backing out the fixes made in their parents. A dirty working directory is
 conceptually similar to another commit in the chain.
 
   $ hg init incrementallyfixchain
   $ cd incrementallyfixchain
 
   $ cat > file.changed <<EOF
   > first
   > second
   > third
   > fourth
   > fifth
   > EOF
   $ hg commit -Aqm "the common ancestor (the baserev)"
   $ cat > file.changed <<EOF
   > first (changed)
   > second
   > third
   > fourth
   > fifth
   > EOF
   $ hg commit -Aqm "the first commit to fix"
   $ cat > file.changed <<EOF
   > first (changed)
   > second
   > third (changed)
   > fourth
   > fifth
   > EOF
   $ hg commit -Aqm "the second commit to fix"
   $ cat > file.changed <<EOF
   > first (changed)
   > second
   > third (changed)
   > fourth
   > fifth (changed)
   > EOF
 
   $ hg fix -r . -r '.^' --working-dir
 
   $ hg parents --template '{rev}\n'
   4
   $ hg cat -r '.^^' file.changed
   first
   second
   third
   fourth
   fifth
   $ hg cat -r '.^' file.changed
   FIRST (CHANGED)
   second
   third
   fourth
   fifth
   $ hg cat -r . file.changed
   FIRST (CHANGED)
   second
   THIRD (CHANGED)
   fourth
   fifth
   $ cat file.changed
   FIRST (CHANGED)
   second
   THIRD (CHANGED)
   fourth
   FIFTH (CHANGED)
 
   $ cd ..
 
 If we incrementally fix a merge commit, we should fix any lines that changed
 versus either parent. You could imagine only fixing the intersection or some
 other subset, but this is necessary if either parent is being fixed. It
 prevents us from forgetting fixes made in either parent.
 
   $ hg init incrementallyfixmergecommit
   $ cd incrementallyfixmergecommit
 
   $ printf "a\nb\nc\n" > file.changed
   $ hg commit -Aqm "ancestor"
 
   $ printf "aa\nb\nc\n" > file.changed
   $ hg commit -m "change a"
 
   $ hg checkout '.^'
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ printf "a\nb\ncc\n" > file.changed
   $ hg commit -m "change c"
   created new head
 
   $ hg merge
   merging file.changed
   0 files updated, 1 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ hg commit -m "merge"
   $ hg cat -r . file.changed
   aa
   b
   cc
 
   $ hg fix -r . --working-dir
   $ hg cat -r . file.changed
   AA
   b
   CC
 
   $ cd ..
 
 Abort fixing revisions if there is an unfinished operation. We don't want to
 make things worse by editing files or stripping/obsoleting things. Also abort
 fixing the working directory if there are unresolved merge conflicts.
 
   $ hg init abortunresolved
   $ cd abortunresolved
 
   $ echo "foo1" > foo.whole
   $ hg commit -Aqm "foo 1"
 
   $ hg update null
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ echo "foo2" > foo.whole
   $ hg commit -Aqm "foo 2"
 
   $ hg --config extensions.rebase= rebase -r 1 -d 0
   rebasing 1:c3b6dc0e177a "foo 2" (tip)
   merging foo.whole
   warning: conflicts while merging foo.whole! (edit, then use 'hg resolve --mark')
   unresolved conflicts (see hg resolve, then hg rebase --continue)
   [1]
 
   $ hg --config extensions.rebase= fix --working-dir
   abort: unresolved conflicts
   (use 'hg resolve')
   [255]
 
   $ hg --config extensions.rebase= fix -r .
   abort: rebase in progress
   (use 'hg rebase --continue' or 'hg rebase --abort')
   [255]
 
 When fixing a file that was renamed, we should diff against the source of the
 rename for incremental fixing and we should correctly reproduce the rename in
 the replacement revision.
 
   $ hg init fixrenamecommit
   $ cd fixrenamecommit
 
   $ printf "a\nb\nc\n" > source.changed
   $ hg commit -Aqm "source revision"
   $ hg move source.changed dest.changed
   $ printf "a\nb\ncc\n" > dest.changed
   $ hg commit -m "dest revision"
 
   $ hg fix -r .
   $ hg log -r tip --copies --template "{file_copies}\n"
   dest.changed (source.changed)
   $ hg cat -r tip dest.changed
   a
   b
   CC
 
   $ cd ..
 
 When fixing revisions that remove files we must ensure that the replacement
 actually removes the file, whereas it could accidentally leave it unchanged or
 write an empty string to it.
 
   $ hg init fixremovedfile
   $ cd fixremovedfile
 
   $ printf "foo\n" > foo.whole
   $ printf "bar\n" > bar.whole
   $ hg commit -Aqm "add files"
   $ hg remove bar.whole
   $ hg commit -m "remove file"
   $ hg status --change .
   R bar.whole
   $ hg fix -r . foo.whole
   $ hg status --change tip
   M foo.whole
   R bar.whole
 
   $ cd ..
 
 If fixing a revision finds no fixes to make, no replacement revision should be
 created.
 
   $ hg init nofixesneeded
   $ cd nofixesneeded
 
   $ printf "FOO\n" > foo.whole
   $ hg commit -Aqm "add file"
   $ hg log --template '{rev}\n'
   0
   $ hg fix -r .
   $ hg log --template '{rev}\n'
   0
 
   $ cd ..
 
 If fixing a commit reverts all the changes in the commit, we replace it with a
 commit that changes no files.
 
   $ hg init nochangesleft
   $ cd nochangesleft
 
   $ printf "FOO\n" > foo.whole
   $ hg commit -Aqm "add file"
   $ printf "foo\n" > foo.whole
   $ hg commit -m "edit file"
   $ hg status --change .
   M foo.whole
   $ hg fix -r .
   $ hg status --change tip
 
   $ cd ..
 
 If we fix a parent and child revision together, the child revision must be
 replaced if the parent is replaced, even if the diffs of the child needed no
 fixes. However, we're free to not replace revisions that need no fixes and have
 no ancestors that are replaced.
 
   $ hg init mustreplacechild
   $ cd mustreplacechild
 
   $ printf "FOO\n" > foo.whole
   $ hg commit -Aqm "add foo"
   $ printf "foo\n" > foo.whole
   $ hg commit -m "edit foo"
   $ printf "BAR\n" > bar.whole
   $ hg commit -Aqm "add bar"
 
   $ hg log --graph --template '{node|shortest} {files}'
   @  bc05 bar.whole
   |
   o  4fd2 foo.whole
   |
   o  f9ac foo.whole
   
   $ hg fix -r 0:2
   $ hg log --graph --template '{node|shortest} {files}'
   o  3801 bar.whole
   |
   o  38cc
   |
   | @  bc05 bar.whole
   | |
   | x  4fd2 foo.whole
   |/
   o  f9ac foo.whole
   
 
   $ cd ..
 
 It's also possible that the child needs absolutely no changes, but we still
 need to replace it to update its parent. If we skipped replacing the child
 because it had no file content changes, it would become an orphan for no good
 reason.
 
   $ hg init mustreplacechildevenifnop
   $ cd mustreplacechildevenifnop
 
   $ printf "Foo\n" > foo.whole
   $ hg commit -Aqm "add a bad foo"
   $ printf "FOO\n" > foo.whole
   $ hg commit -m "add a good foo"
   $ hg fix -r . -r '.^'
   $ hg log --graph --template '{rev} {desc}'
   o  3 add a good foo
   |
   o  2 add a bad foo
   
   @  1 add a good foo
   |
   x  0 add a bad foo
   
 
   $ cd ..
 
 Similar to the case above, the child revision may become empty as a result of
 fixing its parent. We should still create an empty replacement child.
 TODO: determine how this should interact with ui.allowemptycommit given that
 the empty replacement could have children.
 
   $ hg init mustreplacechildevenifempty
   $ cd mustreplacechildevenifempty
 
   $ printf "foo\n" > foo.whole
   $ hg commit -Aqm "add foo"
   $ printf "Foo\n" > foo.whole
   $ hg commit -m "edit foo"
   $ hg fix -r . -r '.^'
   $ hg log --graph --template '{rev} {desc}\n' --stat
   o  3 edit foo
   |
   o  2 add foo
       foo.whole |  1 +
       1 files changed, 1 insertions(+), 0 deletions(-)
   
   @  1 edit foo
   |   foo.whole |  2 +-
   |   1 files changed, 1 insertions(+), 1 deletions(-)
   |
   x  0 add foo
       foo.whole |  1 +
       1 files changed, 1 insertions(+), 0 deletions(-)
   
 
   $ cd ..
 
 Fixing a secret commit should replace it with another secret commit.
 
   $ hg init fixsecretcommit
   $ cd fixsecretcommit
 
   $ printf "foo\n" > foo.whole
   $ hg commit -Aqm "add foo" --secret
   $ hg fix -r .
   $ hg log --template '{rev} {phase}\n'
   1 secret
   0 secret
 
   $ cd ..
 
 We should also preserve phase when fixing a draft commit while the user has
 their default set to secret.
 
   $ hg init respectphasesnewcommit
   $ cd respectphasesnewcommit
 
   $ printf "foo\n" > foo.whole
   $ hg commit -Aqm "add foo"
   $ hg --config phases.newcommit=secret fix -r .
   $ hg log --template '{rev} {phase}\n'
   1 draft
   0 draft
 
   $ cd ..
 
 Debug output should show what fixer commands are being subprocessed, which is
 useful for anyone trying to set up a new config.
 
   $ hg init debugoutput
   $ cd debugoutput
 
   $ printf "foo\nbar\nbaz\n" > foo.changed
   $ hg commit -Aqm "foo"
   $ printf "Foo\nbar\nBaz\n" > foo.changed
   $ hg --debug fix --working-dir
   subprocess: * $TESTTMP/uppercase.py 1-1 3-3 (glob)
 
   $ cd ..
 
 Fixing an obsolete revision can cause divergence, so we abort unless the user
 configures to allow it. This is not yet smart enough to know whether there is a
 successor, but even then it is not likely intentional or idiomatic to fix an
 obsolete revision.
 
   $ hg init abortobsoleterev
   $ cd abortobsoleterev
 
   $ printf "foo\n" > foo.changed
   $ hg commit -Aqm "foo"
   $ hg debugobsolete `hg parents --template '{node}'`
   obsoleted 1 changesets
   $ hg --hidden fix -r 0
   abort: fixing obsolete revision could cause divergence
   [255]
 
   $ hg --hidden fix -r 0 --config experimental.evolution.allowdivergence=true
   $ hg cat -r tip foo.changed
   FOO
 
   $ cd ..
 
 Test all of the available substitution values for fixer commands.
 
   $ hg init substitution
   $ cd substitution
 
   $ mkdir foo
   $ printf "hello\ngoodbye\n" > foo/bar
   $ hg add
   adding foo/bar
   $ hg --config "fix.fail:command=printf '%s\n' '{rootpath}' '{basename}'" \
   >    --config "fix.fail:linerange='{first}' '{last}'" \
   >    --config "fix.fail:fileset=foo/bar" \
   >    fix --working-dir
   $ cat foo/bar
   foo/bar
   bar
   1
   2
 
   $ cd ..
 
 The --base flag should allow picking the revisions to diff against for changed
 files and incremental line formatting.
 
   $ hg init baseflag
   $ cd baseflag
 
   $ printf "one\ntwo\n" > foo.changed
   $ printf "bar\n" > bar.changed
   $ hg commit -Aqm "first"
   $ printf "one\nTwo\n" > foo.changed
   $ hg commit -m "second"
   $ hg fix -w --base .
   $ hg status
   $ hg fix -w --base null
   $ cat foo.changed
   ONE
   TWO
   $ cat bar.changed
   BAR
 
   $ cd ..
 
 If the user asks to fix the parent of another commit, they are asking to create
 an orphan. We must respect experimental.evolution.allowunstable.
 
   $ hg init allowunstable
   $ cd allowunstable
 
   $ printf "one\n" > foo.whole
   $ hg commit -Aqm "first"
   $ printf "two\n" > foo.whole
   $ hg commit -m "second"
   $ hg --config experimental.evolution.allowunstable=False fix -r '.^'
   abort: can only fix a changeset together with all its descendants
   [255]
   $ hg fix -r '.^'
   1 new orphan changesets
   $ hg cat -r 2 foo.whole
   ONE
 
   $ cd ..