histedit: modify rollup to discard date from the rollup commit (issue4820)

This change adjusts and documents the new behaviour of 'roll'. It now fits nicely
with the behaviour of 'commit --amend' and the 'edit' action, by discarding the
date as well as the commit message of the second commit. Previously it used the
later date, like 'fold', but this often wasn't desirable, for example, in the
common use case of using 'roll' to add forgotten changes to a changeset
(because 'hg add' was previously forgotten or not all changes were identified
while using 'hg record').

hgext/histedit.py

@@ -1,1606 +1,1621
 # histedit.py - interactive history editing for mercurial
 #
 # Copyright 2009 Augie Fackler <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 """interactive history editing
 
 With this extension installed, Mercurial gains one new command: histedit. Usage
 is as follows, assuming the following history::
 
  @  3[tip]   7c2fd3b9020c   2009-04-27 18:04 -0500   durin42
  |    Add delta
  |
  o  2   030b686bedc4   2009-04-27 18:04 -0500   durin42
  |    Add gamma
  |
  o  1   c561b4e977df   2009-04-27 18:04 -0500   durin42
  |    Add beta
  |
  o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42
       Add alpha
 
 If you were to run ``hg histedit c561b4e977df``, you would see the following
 file open in your editor::
 
  pick c561b4e977df Add beta
  pick 030b686bedc4 Add gamma
  pick 7c2fd3b9020c Add delta
 
  # Edit history between c561b4e977df and 7c2fd3b9020c
  #
  # Commits are listed from least to most recent
  #
  # Commands:
  #  p, pick = use commit
  #  e, edit = use commit, but stop for amending
  #  f, fold = use commit, but combine it with the one above
- #  r, roll = like fold, but discard this commit's description
+ #  r, roll = like fold, but discard this commit's description and date
  #  d, drop = remove commit from history
  #  m, mess = edit commit message without changing commit content
  #
 
 In this file, lines beginning with ``#`` are ignored. You must specify a rule
 for each revision in your history. For example, if you had meant to add gamma
 before beta, and then wanted to add delta in the same revision as beta, you
 would reorganize the file to look like this::
 
  pick 030b686bedc4 Add gamma
  pick c561b4e977df Add beta
  fold 7c2fd3b9020c Add delta
 
  # Edit history between c561b4e977df and 7c2fd3b9020c
  #
  # Commits are listed from least to most recent
  #
  # Commands:
  #  p, pick = use commit
  #  e, edit = use commit, but stop for amending
  #  f, fold = use commit, but combine it with the one above
- #  r, roll = like fold, but discard this commit's description
+ #  r, roll = like fold, but discard this commit's description and date
  #  d, drop = remove commit from history
  #  m, mess = edit commit message without changing commit content
  #
 
 At which point you close the editor and ``histedit`` starts working. When you
 specify a ``fold`` operation, ``histedit`` will open an editor when it folds
 those revisions together, offering you a chance to clean up the commit message::
 
  Add beta
  ***
  Add delta
 
 Edit the commit message to your liking, then close the editor. The date used
 for the commit will be the later of the two commits' dates. For this example,
 let's assume that the commit message was changed to ``Add beta and delta.``
 After histedit has run and had a chance to remove any old or temporary
 revisions it needed, the history looks like this::
 
  @  2[tip]   989b4d060121   2009-04-27 18:04 -0500   durin42
  |    Add beta and delta.
  |
  o  1   081603921c3f   2009-04-27 18:04 -0500   durin42
  |    Add gamma
  |
  o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42
       Add alpha
 
 Note that ``histedit`` does *not* remove any revisions (even its own temporary
 ones) until after it has completed all the editing operations, so it will
 probably perform several strip operations when it's done. For the above example,
 it had to run strip twice. Strip can be slow depending on a variety of factors,
 so you might need to be a little patient. You can choose to keep the original
 revisions by passing the ``--keep`` flag.
 
 The ``edit`` operation will drop you back to a command prompt,
 allowing you to edit files freely, or even use ``hg record`` to commit
 some changes as a separate commit. When you're done, any remaining
 uncommitted changes will be committed as well. When done, run ``hg
 histedit --continue`` to finish this step. If there are uncommitted
 changes, you'll be prompted for a new commit message, but the default
 commit message will be the original message for the ``edit`` ed
 revision, and the date of the original commit will be preserved.
 
 The ``message`` operation will give you a chance to revise a commit
 message without changing the contents. It's a shortcut for doing
 ``edit`` immediately followed by `hg histedit --continue``.
 
 If ``histedit`` encounters a conflict when moving a revision (while
 handling ``pick`` or ``fold``), it'll stop in a similar manner to
 ``edit`` with the difference that it won't prompt you for a commit
 message when done. If you decide at this point that you don't like how
 much work it will be to rearrange history, or that you made a mistake,
 you can use ``hg histedit --abort`` to abandon the new changes you
 have made and return to the state before you attempted to edit your
 history.
 
 If we clone the histedit-ed example repository above and add four more
 changes, such that we have the following history::
 
    @  6[tip]   038383181893   2009-04-27 18:04 -0500   stefan
    |    Add theta
    |
    o  5   140988835471   2009-04-27 18:04 -0500   stefan
    |    Add eta
    |
    o  4   122930637314   2009-04-27 18:04 -0500   stefan
    |    Add zeta
    |
    o  3   836302820282   2009-04-27 18:04 -0500   stefan
    |    Add epsilon
    |
    o  2   989b4d060121   2009-04-27 18:04 -0500   durin42
    |    Add beta and delta.
    |
    o  1   081603921c3f   2009-04-27 18:04 -0500   durin42
    |    Add gamma
    |
    o  0   d8d2fcd0e319   2009-04-27 18:04 -0500   durin42
         Add alpha
 
 If you run ``hg histedit --outgoing`` on the clone then it is the same
 as running ``hg histedit 836302820282``. If you need plan to push to a
 repository that Mercurial does not detect to be related to the source
 repo, you can add a ``--force`` option.
 
 Config
 ------
 
 Histedit rule lines are truncated to 80 characters by default. You
 can customize this behavior by setting a different length in your
 configuration file::
 
   [histedit]
   linelen = 120      # truncate rule lines at 120 characters
 
 ``hg histedit`` attempts to automatically choose an appropriate base
 revision to use. To change which base revision is used, define a
 revset in your configuration file::
 
   [histedit]
   defaultrev = only(.) & draft()
 
 By default each edited revision needs to be present in histedit commands.
 To remove revision you need to use ``drop`` operation. You can configure
 the drop to be implicit for missing commits by adding::
 
   [histedit]
   dropmissing = True
 
 """
 
 from __future__ import absolute_import
 
 import errno
 import os
 
 from mercurial.i18n import _
 from mercurial import (
     bundle2,
     cmdutil,
     context,
     copies,
     destutil,
     discovery,
     error,
     exchange,
     extensions,
     hg,
     lock,
     merge as mergemod,
     node,
     obsolete,
     repair,
     scmutil,
     util,
 )
 
 pickle = util.pickle
 release = lock.release
 cmdtable = {}
 command = cmdutil.command(cmdtable)
 
 # Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
 # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
 # be specifying the version(s) of Mercurial they are tested with, or
 # leave the attribute unspecified.
 testedwith = 'ships-with-hg-core'
 
 actiontable = {}
 primaryactions = set()
 secondaryactions = set()
 tertiaryactions = set()
 internalactions = set()
 
 def geteditcomment(ui, first, last):
     """ construct the editor comment
     The comment includes::
      - an intro
      - sorted primary commands
      - sorted short commands
      - sorted long commands
      - additional hints
 
     Commands are only included once.
     """
     intro = _("""Edit history between %s and %s
 
 Commits are listed from least to most recent
 
 You can reorder changesets by reordering the lines
 
 Commands:
 """)
     actions = []
     def addverb(v):
         a = actiontable[v]
         lines = a.message.split("\n")
         if len(a.verbs):
             v = ', '.join(sorted(a.verbs, key=lambda v: len(v)))
         actions.append(" %s = %s" % (v, lines[0]))
         actions.extend(['  %s' for l in lines[1:]])
 
     for v in (
          sorted(primaryactions) +
          sorted(secondaryactions) +
          sorted(tertiaryactions)
         ):
         addverb(v)
     actions.append('')
 
     hints = []
     if ui.configbool('histedit', 'dropmissing'):
         hints.append("Deleting a changeset from the list "
                      "will DISCARD it from the edited history!")
 
     lines = (intro % (first, last)).split('\n') + actions + hints
 
     return ''.join(['# %s\n' % l if l else '#\n' for l in lines])
 
 class histeditstate(object):
     def __init__(self, repo, parentctxnode=None, actions=None, keep=None,
             topmost=None, replacements=None, lock=None, wlock=None):
         self.repo = repo
         self.actions = actions
         self.keep = keep
         self.topmost = topmost
         self.parentctxnode = parentctxnode
         self.lock = lock
         self.wlock = wlock
         self.backupfile = None
         if replacements is None:
             self.replacements = []
         else:
             self.replacements = replacements
 
     def read(self):
         """Load histedit state from disk and set fields appropriately."""
         try:
             state = self.repo.vfs.read('histedit-state')
         except IOError as err:
             if err.errno != errno.ENOENT:
                 raise
             cmdutil.wrongtooltocontinue(self.repo, _('histedit'))
 
         if state.startswith('v1\n'):
             data = self._load()
             parentctxnode, rules, keep, topmost, replacements, backupfile = data
         else:
             data = pickle.loads(state)
             parentctxnode, rules, keep, topmost, replacements = data
             backupfile = None
 
         self.parentctxnode = parentctxnode
         rules = "\n".join(["%s %s" % (verb, rest) for [verb, rest] in rules])
         actions = parserules(rules, self)
         self.actions = actions
         self.keep = keep
         self.topmost = topmost
         self.replacements = replacements
         self.backupfile = backupfile
 
     def write(self):
         fp = self.repo.vfs('histedit-state', 'w')
         fp.write('v1\n')
         fp.write('%s\n' % node.hex(self.parentctxnode))
         fp.write('%s\n' % node.hex(self.topmost))
         fp.write('%s\n' % self.keep)
         fp.write('%d\n' % len(self.actions))
         for action in self.actions:
             fp.write('%s\n' % action.tostate())
         fp.write('%d\n' % len(self.replacements))
         for replacement in self.replacements:
             fp.write('%s%s\n' % (node.hex(replacement[0]), ''.join(node.hex(r)
                 for r in replacement[1])))
         backupfile = self.backupfile
         if not backupfile:
             backupfile = ''
         fp.write('%s\n' % backupfile)
         fp.close()
 
     def _load(self):
         fp = self.repo.vfs('histedit-state', 'r')
         lines = [l[:-1] for l in fp.readlines()]
 
         index = 0
         lines[index] # version number
         index += 1
 
         parentctxnode = node.bin(lines[index])
         index += 1
 
         topmost = node.bin(lines[index])
         index += 1
 
         keep = lines[index] == 'True'
         index += 1
 
         # Rules
         rules = []
         rulelen = int(lines[index])
         index += 1
         for i in xrange(rulelen):
             ruleaction = lines[index]
             index += 1
             rule = lines[index]
             index += 1
             rules.append((ruleaction, rule))
 
         # Replacements
         replacements = []
         replacementlen = int(lines[index])
         index += 1
         for i in xrange(replacementlen):
             replacement = lines[index]
             original = node.bin(replacement[:40])
             succ = [node.bin(replacement[i:i + 40]) for i in
                     range(40, len(replacement), 40)]
             replacements.append((original, succ))
             index += 1
 
         backupfile = lines[index]
         index += 1
 
         fp.close()
 
         return parentctxnode, rules, keep, topmost, replacements, backupfile
 
     def clear(self):
         if self.inprogress():
             self.repo.vfs.unlink('histedit-state')
 
     def inprogress(self):
         return self.repo.vfs.exists('histedit-state')
 
 
 class histeditaction(object):
     def __init__(self, state, node):
         self.state = state
         self.repo = state.repo
         self.node = node
 
     @classmethod
     def fromrule(cls, state, rule):
         """Parses the given rule, returning an instance of the histeditaction.
         """
         rulehash = rule.strip().split(' ', 1)[0]
         try:
             rev = node.bin(rulehash)
         except TypeError:
             raise error.ParseError("invalid changeset %s" % rulehash)
         return cls(state, rev)
 
     def verify(self, prev, expected, seen):
         """ Verifies semantic correctness of the rule"""
         repo = self.repo
         ha = node.hex(self.node)
         try:
             self.node = repo[ha].node()
         except error.RepoError:
             raise error.ParseError(_('unknown changeset %s listed')
                               % ha[:12])
         if self.node is not None:
             self._verifynodeconstraints(prev, expected, seen)
 
     def _verifynodeconstraints(self, prev, expected, seen):
         # by default command need a node in the edited list
         if self.node not in expected:
             raise error.ParseError(_('%s "%s" changeset was not a candidate')
                                    % (self.verb, node.short(self.node)),
                                    hint=_('only use listed changesets'))
         # and only one command per node
         if self.node in seen:
             raise error.ParseError(_('duplicated command for changeset %s') %
                                    node.short(self.node))
 
     def torule(self):
         """build a histedit rule line for an action
 
         by default lines are in the form:
         <hash> <rev> <summary>
         """
         ctx = self.repo[self.node]
         summary = _getsummary(ctx)
         line = '%s %s %d %s' % (self.verb, ctx, ctx.rev(), summary)
         # trim to 75 columns by default so it's not stupidly wide in my editor
         # (the 5 more are left for verb)
         maxlen = self.repo.ui.configint('histedit', 'linelen', default=80)
         maxlen = max(maxlen, 22) # avoid truncating hash
         return util.ellipsis(line, maxlen)
 
     def tostate(self):
         """Print an action in format used by histedit state files
            (the first line is a verb, the remainder is the second)
         """
         return "%s\n%s" % (self.verb, node.hex(self.node))
 
     def run(self):
         """Runs the action. The default behavior is simply apply the action's
         rulectx onto the current parentctx."""
         self.applychange()
         self.continuedirty()
         return self.continueclean()
 
     def applychange(self):
         """Applies the changes from this action's rulectx onto the current
         parentctx, but does not commit them."""
         repo = self.repo
         rulectx = repo[self.node]
         repo.ui.pushbuffer(error=True, labeled=True)
         hg.update(repo, self.state.parentctxnode, quietempty=True)
         stats = applychanges(repo.ui, repo, rulectx, {})
         if stats and stats[3] > 0:
             buf = repo.ui.popbuffer()
             repo.ui.write(*buf)
             raise error.InterventionRequired(
                 _('Fix up the change (%s %s)') %
                 (self.verb, node.short(self.node)),
                 hint=_('hg histedit --continue to resume'))
         else:
             repo.ui.popbuffer()
 
     def continuedirty(self):
         """Continues the action when changes have been applied to the working
         copy. The default behavior is to commit the dirty changes."""
         repo = self.repo
         rulectx = repo[self.node]
 
         editor = self.commiteditor()
         commit = commitfuncfor(repo, rulectx)
 
         commit(text=rulectx.description(), user=rulectx.user(),
                date=rulectx.date(), extra=rulectx.extra(), editor=editor)
 
     def commiteditor(self):
         """The editor to be used to edit the commit message."""
         return False
 
     def continueclean(self):
         """Continues the action when the working copy is clean. The default
         behavior is to accept the current commit as the new version of the
         rulectx."""
         ctx = self.repo['.']
         if ctx.node() == self.state.parentctxnode:
             self.repo.ui.warn(_('%s: skipping changeset (no changes)\n') %
                               node.short(self.node))
             return ctx, [(self.node, tuple())]
         if ctx.node() == self.node:
             # Nothing changed
             return ctx, []
         return ctx, [(self.node, (ctx.node(),))]
 
 def commitfuncfor(repo, src):
     """Build a commit function for the replacement of <src>
 
     This function ensure we apply the same treatment to all changesets.
 
     - Add a 'histedit_source' entry in extra.
 
     Note that fold has its own separated logic because its handling is a bit
     different and not easily factored out of the fold method.
     """
     phasemin = src.phase()
     def commitfunc(**kwargs):
         phasebackup = repo.ui.backupconfig('phases', 'new-commit')
         try:
             repo.ui.setconfig('phases', 'new-commit', phasemin,
                               'histedit')
             extra = kwargs.get('extra', {}).copy()
             extra['histedit_source'] = src.hex()
             kwargs['extra'] = extra
             return repo.commit(**kwargs)
         finally:
             repo.ui.restoreconfig(phasebackup)
     return commitfunc
 
 def applychanges(ui, repo, ctx, opts):
     """Merge changeset from ctx (only) in the current working directory"""
     wcpar = repo.dirstate.parents()[0]
     if ctx.p1().node() == wcpar:
         # edits are "in place" we do not need to make any merge,
         # just applies changes on parent for editing
         cmdutil.revert(ui, repo, ctx, (wcpar, node.nullid), all=True)
         stats = None
     else:
         try:
             # ui.forcemerge is an internal variable, do not document
             repo.ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
                               'histedit')
             stats = mergemod.graft(repo, ctx, ctx.p1(), ['local', 'histedit'])
         finally:
             repo.ui.setconfig('ui', 'forcemerge', '', 'histedit')
     return stats
 
 def collapse(repo, first, last, commitopts, skipprompt=False):
     """collapse the set of revisions from first to last as new one.
 
     Expected commit options are:
         - message
         - date
         - username
     Commit message is edited in all cases.
 
     This function works in memory."""
     ctxs = list(repo.set('%d::%d', first, last))
     if not ctxs:
         return None
     for c in ctxs:
         if not c.mutable():
             raise error.ParseError(
                 _("cannot fold into public change %s") % node.short(c.node()))
     base = first.parents()[0]
 
     # commit a new version of the old changeset, including the update
     # collect all files which might be affected
     files = set()
     for ctx in ctxs:
         files.update(ctx.files())
 
     # Recompute copies (avoid recording a -> b -> a)
     copied = copies.pathcopies(base, last)
 
     # prune files which were reverted by the updates
     files = [f for f in files if not cmdutil.samefile(f, last, base)]
     # commit version of these files as defined by head
     headmf = last.manifest()
     def filectxfn(repo, ctx, path):
         if path in headmf:
             fctx = last[path]
             flags = fctx.flags()
             mctx = context.memfilectx(repo,
                                       fctx.path(), fctx.data(),
                                       islink='l' in flags,
                                       isexec='x' in flags,
                                       copied=copied.get(path))
             return mctx
         return None
 
     if commitopts.get('message'):
         message = commitopts['message']
     else:
         message = first.description()
     user = commitopts.get('user')
     date = commitopts.get('date')
     extra = commitopts.get('extra')
 
     parents = (first.p1().node(), first.p2().node())
     editor = None
     if not skipprompt:
         editor = cmdutil.getcommiteditor(edit=True, editform='histedit.fold')
     new = context.memctx(repo,
                          parents=parents,
                          text=message,
                          files=files,
                          filectxfn=filectxfn,
                          user=user,
                          date=date,
                          extra=extra,
                          editor=editor)
     return repo.commitctx(new)
 
 def _isdirtywc(repo):
     return repo[None].dirty(missing=True)
 
 def abortdirty():
     raise error.Abort(_('working copy has pending changes'),
         hint=_('amend, commit, or revert them and run histedit '
             '--continue, or abort with histedit --abort'))
 
 def action(verbs, message, priority=False, internal=False):
     def wrap(cls):
         assert not priority or not internal
         verb = verbs[0]
         if priority:
             primaryactions.add(verb)
         elif internal:
             internalactions.add(verb)
         elif len(verbs) > 1:
             secondaryactions.add(verb)
         else:
             tertiaryactions.add(verb)
 
         cls.verb = verb
         cls.verbs = verbs
         cls.message = message
         for verb in verbs:
             actiontable[verb] = cls
         return cls
     return wrap
 
 @action(['pick', 'p'],
         _('use commit'),
         priority=True)
 class pick(histeditaction):
     def run(self):
         rulectx = self.repo[self.node]
         if rulectx.parents()[0].node() == self.state.parentctxnode:
             self.repo.ui.debug('node %s unchanged\n' % node.short(self.node))
             return rulectx, []
 
         return super(pick, self).run()
 
 @action(['edit', 'e'],
         _('use commit, but stop for amending'),
         priority=True)
 class edit(histeditaction):
     def run(self):
         repo = self.repo
         rulectx = repo[self.node]
         hg.update(repo, self.state.parentctxnode, quietempty=True)
         applychanges(repo.ui, repo, rulectx, {})
         raise error.InterventionRequired(
             _('Editing (%s), you may commit or record as needed now.')
             % node.short(self.node),
             hint=_('hg histedit --continue to resume'))
 
     def commiteditor(self):
         return cmdutil.getcommiteditor(edit=True, editform='histedit.edit')
 
 @action(['fold', 'f'],
         _('use commit, but combine it with the one above'))
 class fold(histeditaction):
     def verify(self, prev, expected, seen):
         """ Verifies semantic correctness of the fold rule"""
         super(fold, self).verify(prev, expected, seen)
         repo = self.repo
         if not prev:
             c = repo[self.node].parents()[0]
         elif not prev.verb in ('pick', 'base'):
             return
         else:
             c = repo[prev.node]
         if not c.mutable():
             raise error.ParseError(
                 _("cannot fold into public change %s") % node.short(c.node()))
 
 
     def continuedirty(self):
         repo = self.repo
         rulectx = repo[self.node]
 
         commit = commitfuncfor(repo, rulectx)
         commit(text='fold-temp-revision %s' % node.short(self.node),
                user=rulectx.user(), date=rulectx.date(),
                extra=rulectx.extra())
 
     def continueclean(self):
         repo = self.repo
         ctx = repo['.']
         rulectx = repo[self.node]
         parentctxnode = self.state.parentctxnode
         if ctx.node() == parentctxnode:
             repo.ui.warn(_('%s: empty changeset\n') %
                               node.short(self.node))
             return ctx, [(self.node, (parentctxnode,))]
 
         parentctx = repo[parentctxnode]
         newcommits = set(c.node() for c in repo.set('(%d::. - %d)', parentctx,
                                                  parentctx))
         if not newcommits:
             repo.ui.warn(_('%s: cannot fold - working copy is not a '
                            'descendant of previous commit %s\n') %
                            (node.short(self.node), node.short(parentctxnode)))
             return ctx, [(self.node, (ctx.node(),))]
 
         middlecommits = newcommits.copy()
         middlecommits.discard(ctx.node())
 
         return self.finishfold(repo.ui, repo, parentctx, rulectx, ctx.node(),
                                middlecommits)
 
     def skipprompt(self):
         """Returns true if the rule should skip the message editor.
 
         For example, 'fold' wants to show an editor, but 'rollup'
         doesn't want to.
         """
         return False
 
     def mergedescs(self):
         """Returns true if the rule should merge messages of multiple changes.
 
         This exists mainly so that 'rollup' rules can be a subclass of
         'fold'.
         """
         return True
 
+    def firstdate(self):
+        """Returns true if the rule should preserve the date of the first
+        change.
+
+        This exists mainly so that 'rollup' rules can be a subclass of
+        'fold'.
+        """
+        return False
+
     def finishfold(self, ui, repo, ctx, oldctx, newnode, internalchanges):
         parent = ctx.parents()[0].node()
         repo.ui.pushbuffer()
         hg.update(repo, parent)
         repo.ui.popbuffer()
         ### prepare new commit data
         commitopts = {}
         commitopts['user'] = ctx.user()
         # commit message
         if not self.mergedescs():
             newmessage = ctx.description()
         else:
             newmessage = '\n***\n'.join(
                 [ctx.description()] +
                 [repo[r].description() for r in internalchanges] +
                 [oldctx.description()]) + '\n'
         commitopts['message'] = newmessage
         # date
+        if self.firstdate():
+            commitopts['date'] = ctx.date()
+        else:
         commitopts['date'] = max(ctx.date(), oldctx.date())
         extra = ctx.extra().copy()
         # histedit_source
         # note: ctx is likely a temporary commit but that the best we can do
         #       here. This is sufficient to solve issue3681 anyway.
         extra['histedit_source'] = '%s,%s' % (ctx.hex(), oldctx.hex())
         commitopts['extra'] = extra
         phasebackup = repo.ui.backupconfig('phases', 'new-commit')
         try:
             phasemin = max(ctx.phase(), oldctx.phase())
             repo.ui.setconfig('phases', 'new-commit', phasemin, 'histedit')
             n = collapse(repo, ctx, repo[newnode], commitopts,
                          skipprompt=self.skipprompt())
         finally:
             repo.ui.restoreconfig(phasebackup)
         if n is None:
             return ctx, []
         repo.ui.pushbuffer()
         hg.update(repo, n)
         repo.ui.popbuffer()
         replacements = [(oldctx.node(), (newnode,)),
                         (ctx.node(), (n,)),
                         (newnode, (n,)),
                        ]
         for ich in internalchanges:
             replacements.append((ich, (n,)))
         return repo[n], replacements
 
 class base(histeditaction):
 
     def run(self):
         if self.repo['.'].node() != self.node:
             mergemod.update(self.repo, self.node, False, True)
             #                                     branchmerge, force)
         return self.continueclean()
 
     def continuedirty(self):
         abortdirty()
 
     def continueclean(self):
         basectx = self.repo['.']
         return basectx, []
 
     def _verifynodeconstraints(self, prev, expected, seen):
         # base can only be use with a node not in the edited set
         if self.node in expected:
             msg = _('%s "%s" changeset was an edited list candidate')
             raise error.ParseError(
                 msg % (self.verb, node.short(self.node)),
                 hint=_('base must only use unlisted changesets'))
 
 @action(['_multifold'],
         _(
     """fold subclass used for when multiple folds happen in a row
 
     We only want to fire the editor for the folded message once when
     (say) four changes are folded down into a single change. This is
     similar to rollup, but we should preserve both messages so that
     when the last fold operation runs we can show the user all the
     commit messages in their editor.
     """),
         internal=True)
 class _multifold(fold):
     def skipprompt(self):
         return True
 
 @action(["roll", "r"],
-        _("like fold, but discard this commit's description"))
+        _("like fold, but discard this commit's description and date"))
 class rollup(fold):
     def mergedescs(self):
         return False
 
     def skipprompt(self):
         return True
 
+    def firstdate(self):
+        return True
+
 @action(["drop", "d"],
         _('remove commit from history'))
 class drop(histeditaction):
     def run(self):
         parentctx = self.repo[self.state.parentctxnode]
         return parentctx, [(self.node, tuple())]
 
 @action(["mess", "m"],
         _('edit commit message without changing commit content'),
         priority=True)
 class message(histeditaction):
     def commiteditor(self):
         return cmdutil.getcommiteditor(edit=True, editform='histedit.mess')
 
 def findoutgoing(ui, repo, remote=None, force=False, opts=None):
     """utility function to find the first outgoing changeset
 
     Used by initialization code"""
     if opts is None:
         opts = {}
     dest = ui.expandpath(remote or 'default-push', remote or 'default')
     dest, revs = hg.parseurl(dest, None)[:2]
     ui.status(_('comparing with %s\n') % util.hidepassword(dest))
 
     revs, checkout = hg.addbranchrevs(repo, repo, revs, None)
     other = hg.peer(repo, opts, dest)
 
     if revs:
         revs = [repo.lookup(rev) for rev in revs]
 
     outgoing = discovery.findcommonoutgoing(repo, other, revs, force=force)
     if not outgoing.missing:
         raise error.Abort(_('no outgoing ancestors'))
     roots = list(repo.revs("roots(%ln)", outgoing.missing))
     if 1 < len(roots):
         msg = _('there are ambiguous outgoing revisions')
         hint = _("see 'hg help histedit' for more detail")
         raise error.Abort(msg, hint=hint)
     return repo.lookup(roots[0])
 
 
 @command('histedit',
     [('', 'commands', '',
       _('read history edits from the specified file'), _('FILE')),
      ('c', 'continue', False, _('continue an edit already in progress')),
      ('', 'edit-plan', False, _('edit remaining actions list')),
      ('k', 'keep', False,
       _("don't strip old nodes after edit is complete")),
      ('', 'abort', False, _('abort an edit in progress')),
      ('o', 'outgoing', False, _('changesets not found in destination')),
      ('f', 'force', False,
       _('force outgoing even for unrelated repositories')),
      ('r', 'rev', [], _('first revision to be edited'), _('REV'))],
      _("[OPTIONS] ([ANCESTOR] | --outgoing [URL])"))
 def histedit(ui, repo, *freeargs, **opts):
     """interactively edit changeset history
 
     This command lets you edit a linear series of changesets (up to
     and including the working directory, which should be clean).
     You can:
 
     - `pick` to [re]order a changeset
 
     - `drop` to omit changeset
 
     - `mess` to reword the changeset commit message
 
     - `fold` to combine it with the preceding changeset (using the later date)
 
-    - `roll` like fold, but discarding this commit's description
+    - `roll` like fold, but discarding this commit's description and date
 
     - `edit` to edit this changeset (preserving date)
 
     There are a number of ways to select the root changeset:
 
     - Specify ANCESTOR directly
 
     - Use --outgoing -- it will be the first linear changeset not
       included in destination. (See :hg:`help config.paths.default-push`)
 
     - Otherwise, the value from the "histedit.defaultrev" config option
       is used as a revset to select the base revision when ANCESTOR is not
       specified. The first revision returned by the revset is used. By
       default, this selects the editable history that is unique to the
       ancestry of the working directory.
 
     .. container:: verbose
 
        If you use --outgoing, this command will abort if there are ambiguous
        outgoing revisions. For example, if there are multiple branches
        containing outgoing revisions.
 
        Use "min(outgoing() and ::.)" or similar revset specification
        instead of --outgoing to specify edit target revision exactly in
        such ambiguous situation. See :hg:`help revsets` for detail about
        selecting revisions.
 
     .. container:: verbose
 
        Examples:
 
          - A number of changes have been made.
            Revision 3 is no longer needed.
 
            Start history editing from revision 3::
 
              hg histedit -r 3
 
            An editor opens, containing the list of revisions,
            with specific actions specified::
 
              pick 5339bf82f0ca 3 Zworgle the foobar
              pick 8ef592ce7cc4 4 Bedazzle the zerlog
              pick 0a9639fcda9d 5 Morgify the cromulancy
 
            Additional information about the possible actions
            to take appears below the list of revisions.
 
            To remove revision 3 from the history,
            its action (at the beginning of the relevant line)
            is changed to 'drop'::
 
              drop 5339bf82f0ca 3 Zworgle the foobar
              pick 8ef592ce7cc4 4 Bedazzle the zerlog
              pick 0a9639fcda9d 5 Morgify the cromulancy
 
          - A number of changes have been made.
            Revision 2 and 4 need to be swapped.
 
            Start history editing from revision 2::
 
              hg histedit -r 2
 
            An editor opens, containing the list of revisions,
            with specific actions specified::
 
              pick 252a1af424ad 2 Blorb a morgwazzle
              pick 5339bf82f0ca 3 Zworgle the foobar
              pick 8ef592ce7cc4 4 Bedazzle the zerlog
 
            To swap revision 2 and 4, its lines are swapped
            in the editor::
 
              pick 8ef592ce7cc4 4 Bedazzle the zerlog
              pick 5339bf82f0ca 3 Zworgle the foobar
              pick 252a1af424ad 2 Blorb a morgwazzle
 
     Returns 0 on success, 1 if user intervention is required (not only
     for intentional "edit" command, but also for resolving unexpected
     conflicts).
     """
     state = histeditstate(repo)
     try:
         state.wlock = repo.wlock()
         state.lock = repo.lock()
         _histedit(ui, repo, state, *freeargs, **opts)
     finally:
         release(state.lock, state.wlock)
 
 goalcontinue = 'continue'
 goalabort = 'abort'
 goaleditplan = 'edit-plan'
 goalnew = 'new'
 
 def _getgoal(opts):
     if opts.get('continue'):
         return goalcontinue
     if opts.get('abort'):
         return goalabort
     if opts.get('edit_plan'):
         return goaleditplan
     return goalnew
 
 def _readfile(ui, path):
     if path == '-':
         with ui.timeblockedsection('histedit'):
             return ui.fin.read()
     else:
         with open(path, 'rb') as f:
             return f.read()
 
 def _validateargs(ui, repo, state, freeargs, opts, goal, rules, revs):
     # TODO only abort if we try to histedit mq patches, not just
     # blanket if mq patches are applied somewhere
     mq = getattr(repo, 'mq', None)
     if mq and mq.applied:
         raise error.Abort(_('source has mq patches applied'))
 
     # basic argument incompatibility processing
     outg = opts.get('outgoing')
     editplan = opts.get('edit_plan')
     abort = opts.get('abort')
     force = opts.get('force')
     if force and not outg:
         raise error.Abort(_('--force only allowed with --outgoing'))
     if goal == 'continue':
         if any((outg, abort, revs, freeargs, rules, editplan)):
             raise error.Abort(_('no arguments allowed with --continue'))
     elif goal == 'abort':
         if any((outg, revs, freeargs, rules, editplan)):
             raise error.Abort(_('no arguments allowed with --abort'))
     elif goal == 'edit-plan':
         if any((outg, revs, freeargs)):
             raise error.Abort(_('only --commands argument allowed with '
                                '--edit-plan'))
     else:
         if os.path.exists(os.path.join(repo.path, 'histedit-state')):
             raise error.Abort(_('history edit already in progress, try '
                                '--continue or --abort'))
         if outg:
             if revs:
                 raise error.Abort(_('no revisions allowed with --outgoing'))
             if len(freeargs) > 1:
                 raise error.Abort(
                     _('only one repo argument allowed with --outgoing'))
         else:
             revs.extend(freeargs)
             if len(revs) == 0:
                 defaultrev = destutil.desthistedit(ui, repo)
                 if defaultrev is not None:
                     revs.append(defaultrev)
 
             if len(revs) != 1:
                 raise error.Abort(
                     _('histedit requires exactly one ancestor revision'))
 
 def _histedit(ui, repo, state, *freeargs, **opts):
     goal = _getgoal(opts)
     revs = opts.get('rev', [])
     rules = opts.get('commands', '')
     state.keep = opts.get('keep', False)
 
     _validateargs(ui, repo, state, freeargs, opts, goal, rules, revs)
 
     # rebuild state
     if goal == goalcontinue:
         state.read()
         state = bootstrapcontinue(ui, state, opts)
     elif goal == goaleditplan:
         _edithisteditplan(ui, repo, state, rules)
         return
     elif goal == goalabort:
         _aborthistedit(ui, repo, state)
         return
     else:
         # goal == goalnew
         _newhistedit(ui, repo, state, revs, freeargs, opts)
 
     _continuehistedit(ui, repo, state)
     _finishhistedit(ui, repo, state)
 
 def _continuehistedit(ui, repo, state):
     """This function runs after either:
     - bootstrapcontinue (if the goal is 'continue')
     - _newhistedit (if the goal is 'new')
     """
     # preprocess rules so that we can hide inner folds from the user
     # and only show one editor
     actions = state.actions[:]
     for idx, (action, nextact) in enumerate(
             zip(actions, actions[1:] + [None])):
         if action.verb == 'fold' and nextact and nextact.verb == 'fold':
             state.actions[idx].__class__ = _multifold
 
     total = len(state.actions)
     pos = 0
     while state.actions:
         state.write()
         actobj = state.actions.pop(0)
         pos += 1
         ui.progress(_("editing"), pos, actobj.torule(),
                     _('changes'), total)
         ui.debug('histedit: processing %s %s\n' % (actobj.verb,\
                                                    actobj.torule()))
         parentctx, replacement_ = actobj.run()
         state.parentctxnode = parentctx.node()
         state.replacements.extend(replacement_)
     state.write()
     ui.progress(_("editing"), None)
 
 def _finishhistedit(ui, repo, state):
     """This action runs when histedit is finishing its session"""
     repo.ui.pushbuffer()
     hg.update(repo, state.parentctxnode, quietempty=True)
     repo.ui.popbuffer()
 
     mapping, tmpnodes, created, ntm = processreplacement(state)
     if mapping:
         for prec, succs in mapping.iteritems():
             if not succs:
                 ui.debug('histedit: %s is dropped\n' % node.short(prec))
             else:
                 ui.debug('histedit: %s is replaced by %s\n' % (
                     node.short(prec), node.short(succs[0])))
                 if len(succs) > 1:
                     m = 'histedit:                            %s'
                     for n in succs[1:]:
                         ui.debug(m % node.short(n))
 
     supportsmarkers = obsolete.isenabled(repo, obsolete.createmarkersopt)
     if supportsmarkers:
         # Only create markers if the temp nodes weren't already removed.
         obsolete.createmarkers(repo, ((repo[t],()) for t in sorted(tmpnodes)
                                        if t in repo))
     else:
         cleanupnode(ui, repo, 'temp', tmpnodes)
 
     if not state.keep:
         if mapping:
             movebookmarks(ui, repo, mapping, state.topmost, ntm)
             # TODO update mq state
         if supportsmarkers:
             markers = []
             # sort by revision number because it sound "right"
             for prec in sorted(mapping, key=repo.changelog.rev):
                 succs = mapping[prec]
                 markers.append((repo[prec],
                                 tuple(repo[s] for s in succs)))
             if markers:
                 obsolete.createmarkers(repo, markers)
         else:
             cleanupnode(ui, repo, 'replaced', mapping)
 
     state.clear()
     if os.path.exists(repo.sjoin('undo')):
         os.unlink(repo.sjoin('undo'))
     if repo.vfs.exists('histedit-last-edit.txt'):
         repo.vfs.unlink('histedit-last-edit.txt')
 
 def _aborthistedit(ui, repo, state):
     try:
         state.read()
         __, leafs, tmpnodes, __ = processreplacement(state)
         ui.debug('restore wc to old parent %s\n'
                 % node.short(state.topmost))
 
         # Recover our old commits if necessary
         if not state.topmost in repo and state.backupfile:
             backupfile = repo.join(state.backupfile)
             f = hg.openpath(ui, backupfile)
             gen = exchange.readbundle(ui, f, backupfile)
             with repo.transaction('histedit.abort') as tr:
                 if not isinstance(gen, bundle2.unbundle20):
                     gen.apply(repo, 'histedit', 'bundle:' + backupfile)
                 if isinstance(gen, bundle2.unbundle20):
                     bundle2.applybundle(repo, gen, tr,
                                         source='histedit',
                                         url='bundle:' + backupfile)
 
             os.remove(backupfile)
 
         # check whether we should update away
         if repo.unfiltered().revs('parents() and (%n  or %ln::)',
                                 state.parentctxnode, leafs | tmpnodes):
             hg.clean(repo, state.topmost, show_stats=True, quietempty=True)
         cleanupnode(ui, repo, 'created', tmpnodes)
         cleanupnode(ui, repo, 'temp', leafs)
     except Exception:
         if state.inprogress():
             ui.warn(_('warning: encountered an exception during histedit '
                 '--abort; the repository may not have been completely '
                 'cleaned up\n'))
         raise
     finally:
             state.clear()
 
 def _edithisteditplan(ui, repo, state, rules):
     state.read()
     if not rules:
         comment = geteditcomment(ui,
                                  node.short(state.parentctxnode),
                                  node.short(state.topmost))
         rules = ruleeditor(repo, ui, state.actions, comment)
     else:
         rules = _readfile(ui, rules)
     actions = parserules(rules, state)
     ctxs = [repo[act.node] \
             for act in state.actions if act.node]
     warnverifyactions(ui, repo, actions, state, ctxs)
     state.actions = actions
     state.write()
 
 def _newhistedit(ui, repo, state, revs, freeargs, opts):
     outg = opts.get('outgoing')
     rules = opts.get('commands', '')
     force = opts.get('force')
 
     cmdutil.checkunfinished(repo)
     cmdutil.bailifchanged(repo)
 
     topmost, empty = repo.dirstate.parents()
     if outg:
         if freeargs:
             remote = freeargs[0]
         else:
             remote = None
         root = findoutgoing(ui, repo, remote, force, opts)
     else:
         rr = list(repo.set('roots(%ld)', scmutil.revrange(repo, revs)))
         if len(rr) != 1:
             raise error.Abort(_('The specified revisions must have '
                 'exactly one common root'))
         root = rr[0].node()
 
     revs = between(repo, root, topmost, state.keep)
     if not revs:
         raise error.Abort(_('%s is not an ancestor of working directory') %
                          node.short(root))
 
     ctxs = [repo[r] for r in revs]
     if not rules:
         comment = geteditcomment(ui, node.short(root), node.short(topmost))
         actions = [pick(state, r) for r in revs]
         rules = ruleeditor(repo, ui, actions, comment)
     else:
         rules = _readfile(ui, rules)
     actions = parserules(rules, state)
     warnverifyactions(ui, repo, actions, state, ctxs)
 
     parentctxnode = repo[root].parents()[0].node()
 
     state.parentctxnode = parentctxnode
     state.actions = actions
     state.topmost = topmost
     state.replacements = []
 
     # Create a backup so we can always abort completely.
     backupfile = None
     if not obsolete.isenabled(repo, obsolete.createmarkersopt):
         backupfile = repair._bundle(repo, [parentctxnode], [topmost], root,
                                     'histedit')
     state.backupfile = backupfile
 
 def _getsummary(ctx):
     # a common pattern is to extract the summary but default to the empty
     # string
     summary = ctx.description() or ''
     if summary:
         summary = summary.splitlines()[0]
     return summary
 
 def bootstrapcontinue(ui, state, opts):
     repo = state.repo
     if state.actions:
         actobj = state.actions.pop(0)
 
         if _isdirtywc(repo):
             actobj.continuedirty()
             if _isdirtywc(repo):
                 abortdirty()
 
         parentctx, replacements = actobj.continueclean()
 
         state.parentctxnode = parentctx.node()
         state.replacements.extend(replacements)
 
     return state
 
 def between(repo, old, new, keep):
     """select and validate the set of revision to edit
 
     When keep is false, the specified set can't have children."""
     ctxs = list(repo.set('%n::%n', old, new))
     if ctxs and not keep:
         if (not obsolete.isenabled(repo, obsolete.allowunstableopt) and
             repo.revs('(%ld::) - (%ld)', ctxs, ctxs)):
             raise error.Abort(_('can only histedit a changeset together '
                                 'with all its descendants'))
         if repo.revs('(%ld) and merge()', ctxs):
             raise error.Abort(_('cannot edit history that contains merges'))
         root = ctxs[0] # list is already sorted by repo.set
         if not root.mutable():
             raise error.Abort(_('cannot edit public changeset: %s') % root,
                              hint=_("see 'hg help phases' for details"))
     return [c.node() for c in ctxs]
 
 def ruleeditor(repo, ui, actions, editcomment=""):
     """open an editor to edit rules
 
     rules are in the format [ [act, ctx], ...] like in state.rules
     """
     if repo.ui.configbool("experimental", "histedit.autoverb"):
         newact = util.sortdict()
         for act in actions:
             ctx = repo[act.node]
             summary = _getsummary(ctx)
             fword = summary.split(' ', 1)[0].lower()
             added = False
 
             # if it doesn't end with the special character '!' just skip this
             if fword.endswith('!'):
                 fword = fword[:-1]
                 if fword in primaryactions | secondaryactions | tertiaryactions:
                     act.verb = fword
                     # get the target summary
                     tsum = summary[len(fword) + 1:].lstrip()
                     # safe but slow: reverse iterate over the actions so we
                     # don't clash on two commits having the same summary
                     for na, l in reversed(list(newact.iteritems())):
                         actx = repo[na.node]
                         asum = _getsummary(actx)
                         if asum == tsum:
                             added = True
                             l.append(act)
                             break
 
             if not added:
                 newact[act] = []
 
         # copy over and flatten the new list
         actions = []
         for na, l in newact.iteritems():
             actions.append(na)
             actions += l
 
     rules = '\n'.join([act.torule() for act in actions])
     rules += '\n\n'
     rules += editcomment
     rules = ui.edit(rules, ui.username(), {'prefix': 'histedit'},
                     repopath=repo.path)
 
     # Save edit rules in .hg/histedit-last-edit.txt in case
     # the user needs to ask for help after something
     # surprising happens.
     f = open(repo.join('histedit-last-edit.txt'), 'w')
     f.write(rules)
     f.close()
 
     return rules
 
 def parserules(rules, state):
     """Read the histedit rules string and return list of action objects """
     rules = [l for l in (r.strip() for r in rules.splitlines())
                 if l and not l.startswith('#')]
     actions = []
     for r in rules:
         if ' ' not in r:
             raise error.ParseError(_('malformed line "%s"') % r)
         verb, rest = r.split(' ', 1)
 
         if verb not in actiontable:
             raise error.ParseError(_('unknown action "%s"') % verb)
 
         action = actiontable[verb].fromrule(state, rest)
         actions.append(action)
     return actions
 
 def warnverifyactions(ui, repo, actions, state, ctxs):
     try:
         verifyactions(actions, state, ctxs)
     except error.ParseError:
         if repo.vfs.exists('histedit-last-edit.txt'):
             ui.warn(_('warning: histedit rules saved '
                       'to: .hg/histedit-last-edit.txt\n'))
         raise
 
 def verifyactions(actions, state, ctxs):
     """Verify that there exists exactly one action per given changeset and
     other constraints.
 
     Will abort if there are to many or too few rules, a malformed rule,
     or a rule on a changeset outside of the user-given range.
     """
     expected = set(c.node() for c in ctxs)
     seen = set()
     prev = None
     for action in actions:
         action.verify(prev, expected, seen)
         prev = action
         if action.node is not None:
             seen.add(action.node)
     missing = sorted(expected - seen)  # sort to stabilize output
 
     if state.repo.ui.configbool('histedit', 'dropmissing'):
         if len(actions) == 0:
             raise error.ParseError(_('no rules provided'),
                     hint=_('use strip extension to remove commits'))
 
         drops = [drop(state, n) for n in missing]
         # put the in the beginning so they execute immediately and
         # don't show in the edit-plan in the future
         actions[:0] = drops
     elif missing:
         raise error.ParseError(_('missing rules for changeset %s') %
                 node.short(missing[0]),
                 hint=_('use "drop %s" to discard, see also: '
                        "'hg help -e histedit.config'")
                        % node.short(missing[0]))
 
 def adjustreplacementsfrommarkers(repo, oldreplacements):
     """Adjust replacements from obsolescence markers
 
     Replacements structure is originally generated based on
     histedit's state and does not account for changes that are
     not recorded there. This function fixes that by adding
     data read from obsolescence markers"""
     if not obsolete.isenabled(repo, obsolete.createmarkersopt):
         return oldreplacements
 
     unfi = repo.unfiltered()
     nm = unfi.changelog.nodemap
     obsstore = repo.obsstore
     newreplacements = list(oldreplacements)
     oldsuccs = [r[1] for r in oldreplacements]
     # successors that have already been added to succstocheck once
     seensuccs = set().union(*oldsuccs) # create a set from an iterable of tuples
     succstocheck = list(seensuccs)
     while succstocheck:
         n = succstocheck.pop()
         missing = nm.get(n) is None
         markers = obsstore.successors.get(n, ())
         if missing and not markers:
             # dead end, mark it as such
             newreplacements.append((n, ()))
         for marker in markers:
             nsuccs = marker[1]
             newreplacements.append((n, nsuccs))
             for nsucc in nsuccs:
                 if nsucc not in seensuccs:
                     seensuccs.add(nsucc)
                     succstocheck.append(nsucc)
 
     return newreplacements
 
 def processreplacement(state):
     """process the list of replacements to return
 
     1) the final mapping between original and created nodes
     2) the list of temporary node created by histedit
     3) the list of new commit created by histedit"""
     replacements = adjustreplacementsfrommarkers(state.repo, state.replacements)
     allsuccs = set()
     replaced = set()
     fullmapping = {}
     # initialize basic set
     # fullmapping records all operations recorded in replacement
     for rep in replacements:
         allsuccs.update(rep[1])
         replaced.add(rep[0])
         fullmapping.setdefault(rep[0], set()).update(rep[1])
     new = allsuccs - replaced
     tmpnodes = allsuccs & replaced
     # Reduce content fullmapping into direct relation between original nodes
     # and final node created during history edition
     # Dropped changeset are replaced by an empty list
     toproceed = set(fullmapping)
     final = {}
     while toproceed:
         for x in list(toproceed):
             succs = fullmapping[x]
             for s in list(succs):
                 if s in toproceed:
                     # non final node with unknown closure
                     # We can't process this now
                     break
                 elif s in final:
                     # non final node, replace with closure
                     succs.remove(s)
                     succs.update(final[s])
             else:
                 final[x] = succs
                 toproceed.remove(x)
     # remove tmpnodes from final mapping
     for n in tmpnodes:
         del final[n]
     # we expect all changes involved in final to exist in the repo
     # turn `final` into list (topologically sorted)
     nm = state.repo.changelog.nodemap
     for prec, succs in final.items():
         final[prec] = sorted(succs, key=nm.get)
 
     # computed topmost element (necessary for bookmark)
     if new:
         newtopmost = sorted(new, key=state.repo.changelog.rev)[-1]
     elif not final:
         # Nothing rewritten at all. we won't need `newtopmost`
         # It is the same as `oldtopmost` and `processreplacement` know it
         newtopmost = None
     else:
         # every body died. The newtopmost is the parent of the root.
         r = state.repo.changelog.rev
         newtopmost = state.repo[sorted(final, key=r)[0]].p1().node()
 
     return final, tmpnodes, new, newtopmost
 
 def movebookmarks(ui, repo, mapping, oldtopmost, newtopmost):
     """Move bookmark from old to newly created node"""
     if not mapping:
         # if nothing got rewritten there is not purpose for this function
         return
     moves = []
     for bk, old in sorted(repo._bookmarks.iteritems()):
         if old == oldtopmost:
             # special case ensure bookmark stay on tip.
             #
             # This is arguably a feature and we may only want that for the
             # active bookmark. But the behavior is kept compatible with the old
             # version for now.
             moves.append((bk, newtopmost))
             continue
         base = old
         new = mapping.get(base, None)
         if new is None:
             continue
         while not new:
             # base is killed, trying with parent
             base = repo[base].p1().node()
             new = mapping.get(base, (base,))
             # nothing to move
         moves.append((bk, new[-1]))
     if moves:
         lock = tr = None
         try:
             lock = repo.lock()
             tr = repo.transaction('histedit')
             marks = repo._bookmarks
             for mark, new in moves:
                 old = marks[mark]
                 ui.note(_('histedit: moving bookmarks %s from %s to %s\n')
                         % (mark, node.short(old), node.short(new)))
                 marks[mark] = new
             marks.recordchange(tr)
             tr.close()
         finally:
             release(tr, lock)
 
 def cleanupnode(ui, repo, name, nodes):
     """strip a group of nodes from the repository
 
     The set of node to strip may contains unknown nodes."""
     ui.debug('should strip %s nodes %s\n' %
              (name, ', '.join([node.short(n) for n in nodes])))
     with repo.lock():
         # do not let filtering get in the way of the cleanse
         # we should probably get rid of obsolescence marker created during the
         # histedit, but we currently do not have such information.
         repo = repo.unfiltered()
         # Find all nodes that need to be stripped
         # (we use %lr instead of %ln to silently ignore unknown items)
         nm = repo.changelog.nodemap
         nodes = sorted(n for n in nodes if n in nm)
         roots = [c.node() for c in repo.set("roots(%ln)", nodes)]
         for c in roots:
             # We should process node in reverse order to strip tip most first.
             # but this trigger a bug in changegroup hook.
             # This would reduce bundle overhead
             repair.strip(ui, repo, c)
 
 def stripwrapper(orig, ui, repo, nodelist, *args, **kwargs):
     if isinstance(nodelist, str):
         nodelist = [nodelist]
     if os.path.exists(os.path.join(repo.path, 'histedit-state')):
         state = histeditstate(repo)
         state.read()
         histedit_nodes = set([action.node for action
                              in state.actions if action.node])
         common_nodes = histedit_nodes & set(nodelist)
         if common_nodes:
             raise error.Abort(_("histedit in progress, can't strip %s")
                              % ', '.join(node.short(x) for x in common_nodes))
     return orig(ui, repo, nodelist, *args, **kwargs)
 
 extensions.wrapfunction(repair, 'strip', stripwrapper)
 
 def summaryhook(ui, repo):
     if not os.path.exists(repo.join('histedit-state')):
         return
     state = histeditstate(repo)
     state.read()
     if state.actions:
         # i18n: column positioning for "hg summary"
         ui.write(_('hist:   %s (histedit --continue)\n') %
                  (ui.label(_('%d remaining'), 'histedit.remaining') %
                   len(state.actions)))
 
 def extsetup(ui):
     cmdutil.summaryhooks.add('histedit', summaryhook)
     cmdutil.unfinishedstates.append(
         ['histedit-state', False, True, _('histedit in progress'),
          _("use 'hg histedit --continue' or 'hg histedit --abort'")])
     cmdutil.afterresolvedstates.append(
         ['histedit-state', _('hg histedit --continue')])
     if ui.configbool("experimental", "histeditng"):
         globals()['base'] = action(['base', 'b'],
             _('checkout changeset and apply further changesets from there')
         )(base)

tests/test-histedit-arguments.t

@@ -1,550 +1,550
 Test argument handling and various data parsing
 ==================================================
 
 
 Enable extensions used by this test.
   $ cat >>$HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > EOF
 
 Repo setup.
   $ hg init foo
   $ cd foo
   $ echo alpha >> alpha
   $ hg addr
   adding alpha
   $ hg ci -m one
   $ echo alpha >> alpha
   $ hg ci -m two
   $ echo alpha >> alpha
   $ hg ci -m three
   $ echo alpha >> alpha
   $ hg ci -m four
   $ echo alpha >> alpha
   $ hg ci -m five
 
   $ hg log --style compact --graph
   @  4[tip]   08d98a8350f3   1970-01-01 00:00 +0000   test
   |    five
   |
   o  3   c8e68270e35a   1970-01-01 00:00 +0000   test
   |    four
   |
   o  2   eb57da33312f   1970-01-01 00:00 +0000   test
   |    three
   |
   o  1   579e40513370   1970-01-01 00:00 +0000   test
   |    two
   |
   o  0   6058cbb6cfd7   1970-01-01 00:00 +0000   test
        one
   
 
 histedit --continue/--abort with no existing state
 --------------------------------------------------
 
   $ hg histedit --continue
   abort: no histedit in progress
   [255]
   $ hg histedit --abort
   abort: no histedit in progress
   [255]
 
 Run a dummy edit to make sure we get tip^^ correctly via revsingle.
 --------------------------------------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^"
   pick eb57da33312f 2 three
   pick c8e68270e35a 3 four
   pick 08d98a8350f3 4 five
   
   # Edit history between eb57da33312f and 08d98a8350f3
   #
   # Commits are listed from least to most recent
   #
   # You can reorder changesets by reordering the lines
   #
   # Commands:
   #
   #  e, edit = use commit, but stop for amending
   #  m, mess = edit commit message without changing commit content
   #  p, pick = use commit
   #  d, drop = remove commit from history
   #  f, fold = use commit, but combine it with the one above
-  #  r, roll = like fold, but discard this commit's description
+  #  r, roll = like fold, but discard this commit's description and date
   #
 
 Run on a revision not ancestors of the current working directory.
 --------------------------------------------------------------------
 
   $ hg up 2
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg histedit -r 4
   abort: 08d98a8350f3 is not an ancestor of working directory
   [255]
   $ hg up --quiet
 
 
 Test that we pick the minimum of a revrange
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit '2::' --commands - << EOF
   > pick eb57da33312f 2 three
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
   $ hg up --quiet
 
   $ HGEDITOR=cat hg histedit 'tip:2' --commands - << EOF
   > pick eb57da33312f 2 three
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
   $ hg up --quiet
 
 Test config specified default
 -----------------------------
 
   $ HGEDITOR=cat hg histedit --config "histedit.defaultrev=only(.) - ::eb57da33312f" --commands - << EOF
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
 
 Run on a revision not descendants of the initial parent
 --------------------------------------------------------------------
 
 Test the message shown for inconsistent histedit state, which may be
 created (and forgotten) by Mercurial earlier than 2.7. This emulates
 Mercurial earlier than 2.7 by renaming ".hg/histedit-state"
 temporarily.
 
   $ hg log -G -T '{rev} {shortest(node)} {desc}\n' -r 2::
   @  4 08d9 five
   |
   o  3 c8e6 four
   |
   o  2 eb57 three
   |
   ~
   $ HGEDITOR=cat hg histedit -r 4 --commands - << EOF
   > edit 08d98a8350f3 4 five
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   reverting alpha
   Editing (08d98a8350f3), you may commit or record as needed now.
   (hg histedit --continue to resume)
   [1]
 
   $ hg graft --continue
   abort: no graft in progress
   (continue: hg histedit --continue)
   [255]
 
   $ mv .hg/histedit-state .hg/histedit-state.back
   $ hg update --quiet --clean 2
   $ echo alpha >> alpha
   $ mv .hg/histedit-state.back .hg/histedit-state
 
   $ hg histedit --continue
   saved backup bundle to $TESTTMP/foo/.hg/strip-backup/08d98a8350f3-02594089-backup.hg (glob)
   $ hg log -G -T '{rev} {shortest(node)} {desc}\n' -r 2::
   @  4 f5ed five
   |
   | o  3 c8e6 four
   |/
   o  2 eb57 three
   |
   ~
 
   $ hg unbundle -q $TESTTMP/foo/.hg/strip-backup/08d98a8350f3-02594089-backup.hg
   $ hg strip -q -r f5ed --config extensions.strip=
   $ hg up -q 08d98a8350f3
 
 Test that missing revisions are detected
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pick eb57da33312f 2 three
   > pick 08d98a8350f3 4 five
   > EOF
   hg: parse error: missing rules for changeset c8e68270e35a
   (use "drop c8e68270e35a" to discard, see also: 'hg help -e histedit.config')
   [255]
 
 Test that extra revisions are detected
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pick 6058cbb6cfd7 0 one
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
   hg: parse error: pick "6058cbb6cfd7" changeset was not a candidate
   (only use listed changesets)
   [255]
 
 Test malformed line
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pickeb57da33312f2three
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
   hg: parse error: malformed line "pickeb57da33312f2three"
   [255]
 
 Test unknown changeset
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pick 0123456789ab 2 three
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
   hg: parse error: unknown changeset 0123456789ab listed
   [255]
 
 Test unknown command
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > coin eb57da33312f 2 three
   > pick c8e68270e35a 3 four
   > pick 08d98a8350f3 4 five
   > EOF
   hg: parse error: unknown action "coin"
   [255]
 
 Test duplicated changeset
 ---------------------------------------
 
 So one is missing and one appear twice.
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pick eb57da33312f 2 three
   > pick eb57da33312f 2 three
   > pick 08d98a8350f3 4 five
   > EOF
   hg: parse error: duplicated command for changeset eb57da33312f
   [255]
 
 Test bogus rev
 ---------------------------------------
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pick eb57da33312f 2 three
   > pick 0
   > pick 08d98a8350f3 4 five
   > EOF
   hg: parse error: invalid changeset 0
   [255]
 
 Test short version of command
 ---------------------------------------
 
 Note: we use varying amounts of white space between command name and changeset
 short hash. This tests issue3893.
 
   $ HGEDITOR=cat hg histedit "tip^^" --commands - << EOF
   > pick eb57da33312f 2 three
   > p    c8e68270e35a 3 four
   > f 08d98a8350f3 4 five
   > EOF
   four
   ***
   five
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: changed alpha
   saved backup bundle to $TESTTMP/foo/.hg/strip-backup/*-backup.hg (glob)
   saved backup bundle to $TESTTMP/foo/.hg/strip-backup/*-backup.hg (glob)
 
   $ hg update -q 2
   $ echo x > x
   $ hg add x
   $ hg commit -m'x' x
   created new head
   $ hg histedit -r 'heads(all())'
   abort: The specified revisions must have exactly one common root
   [255]
 
 Test that trimming description using multi-byte characters
 --------------------------------------------------------------------
 
   $ python <<EOF
   > fp = open('logfile', 'w')
   > fp.write('12345678901234567890123456789012345678901234567890' +
   >          '12345') # there are 5 more columns for 80 columns
   > 
   > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
   > fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
   > 
   > fp.close()
   > EOF
   $ echo xx >> x
   $ hg --encoding utf-8 commit --logfile logfile
 
   $ HGEDITOR=cat hg --encoding utf-8 histedit tip
   pick 3d3ea1f3a10b 5 1234567890123456789012345678901234567890123456789012345\xe3\x81\x82... (esc)
   
   # Edit history between 3d3ea1f3a10b and 3d3ea1f3a10b
   #
   # Commits are listed from least to most recent
   #
   # You can reorder changesets by reordering the lines
   #
   # Commands:
   #
   #  e, edit = use commit, but stop for amending
   #  m, mess = edit commit message without changing commit content
   #  p, pick = use commit
   #  d, drop = remove commit from history
   #  f, fold = use commit, but combine it with the one above
-  #  r, roll = like fold, but discard this commit's description
+  #  r, roll = like fold, but discard this commit's description and date
   #
 
 Test --continue with --keep
 
   $ hg strip -q -r . --config extensions.strip=
   $ hg histedit '.^' -q --keep --commands - << EOF
   > edit eb57da33312f 2 three
   > pick f3cfcca30c44 4 x
   > EOF
   Editing (eb57da33312f), you may commit or record as needed now.
   (hg histedit --continue to resume)
   [1]
   $ echo edit >> alpha
   $ hg histedit -q --continue
   $ hg log -G -T '{rev}:{node|short} {desc}'
   @  6:8fda0c726bf2 x
   |
   o  5:63379946892c three
   |
   | o  4:f3cfcca30c44 x
   | |
   | | o  3:2a30f3cfee78 four
   | |/   ***
   | |    five
   | o  2:eb57da33312f three
   |/
   o  1:579e40513370 two
   |
   o  0:6058cbb6cfd7 one
   
 
 Test that abort fails gracefully on exception
 ----------------------------------------------
   $ hg histedit . -q --commands - << EOF
   > edit 8fda0c726bf2 6 x
   > EOF
   Editing (8fda0c726bf2), you may commit or record as needed now.
   (hg histedit --continue to resume)
   [1]
 Corrupt histedit state file
   $ sed 's/8fda0c726bf2/123456789012/' .hg/histedit-state > ../corrupt-histedit
   $ mv ../corrupt-histedit .hg/histedit-state
   $ hg histedit --abort
   warning: encountered an exception during histedit --abort; the repository may not have been completely cleaned up
   abort: .*(No such file or directory:|The system cannot find the file specified).* (re)
   [255]
 Histedit state has been exited
   $ hg summary -q
   parent: 5:63379946892c 
   commit: 1 added, 1 unknown (new branch head)
   update: 4 new changesets (update)
 
   $ cd ..
 
 Set up default base revision tests
 
   $ hg init defaultbase
   $ cd defaultbase
   $ touch foo
   $ hg -q commit -A -m root
   $ echo 1 > foo
   $ hg commit -m 'public 1'
   $ hg phase --force --public -r .
   $ echo 2 > foo
   $ hg commit -m 'draft after public'
   $ hg -q up -r 1
   $ echo 3 > foo
   $ hg commit -m 'head 1 public'
   created new head
   $ hg phase --force --public -r .
   $ echo 4 > foo
   $ hg commit -m 'head 1 draft 1'
   $ echo 5 > foo
   $ hg commit -m 'head 1 draft 2'
   $ hg -q up -r 2
   $ echo 6 > foo
   $ hg commit -m 'head 2 commit 1'
   $ echo 7 > foo
   $ hg commit -m 'head 2 commit 2'
   $ hg -q up -r 2
   $ echo 8 > foo
   $ hg commit -m 'head 3'
   created new head
   $ hg -q up -r 2
   $ echo 9 > foo
   $ hg commit -m 'head 4'
   created new head
   $ hg merge --tool :local -r 8
   0 files updated, 1 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ hg commit -m 'merge head 3 into head 4'
   $ echo 11 > foo
   $ hg commit -m 'commit 1 after merge'
   $ echo 12 > foo
   $ hg commit -m 'commit 2 after merge'
 
   $ hg log -G -T '{rev}:{node|short} {phase} {desc}\n'
   @  12:8cde254db839 draft commit 2 after merge
   |
   o  11:6f2f0241f119 draft commit 1 after merge
   |
   o    10:90506cc76b00 draft merge head 3 into head 4
   |\
   | o  9:f8607a373a97 draft head 4
   | |
   o |  8:0da92be05148 draft head 3
   |/
   | o  7:4c35cdf97d5e draft head 2 commit 2
   | |
   | o  6:931820154288 draft head 2 commit 1
   |/
   | o  5:8cdc02b9bc63 draft head 1 draft 2
   | |
   | o  4:463b8c0d2973 draft head 1 draft 1
   | |
   | o  3:23a0c4eefcbf public head 1 public
   | |
   o |  2:4117331c3abb draft draft after public
   |/
   o  1:4426d359ea59 public public 1
   |
   o  0:54136a8ddf32 public root
   
 
 Default base revision should stop at public changesets
 
   $ hg -q up 8cdc02b9bc63
   $ hg histedit --commands - <<EOF
   > pick 463b8c0d2973
   > pick 8cdc02b9bc63
   > EOF
 
 Default base revision should stop at branchpoint
 
   $ hg -q up 4c35cdf97d5e
   $ hg histedit --commands - <<EOF
   > pick 931820154288
   > pick 4c35cdf97d5e
   > EOF
 
 Default base revision should stop at merge commit
 
   $ hg -q up 8cde254db839
   $ hg histedit --commands - <<EOF
   > pick 6f2f0241f119
   > pick 8cde254db839
   > EOF
 
 commit --amend should abort if histedit is in progress
 (issue4800) and markers are not being created.
 Eventually, histedit could perhaps look at `source` extra,
 in which case this test should be revisited.
 
   $ hg -q up 8cde254db839
   $ hg histedit 6f2f0241f119 --commands - <<EOF
   > pick 8cde254db839
   > edit 6f2f0241f119
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging foo
   warning: conflicts while merging foo! (edit, then use 'hg resolve --mark')
   Fix up the change (pick 8cde254db839)
   (hg histedit --continue to resume)
   [1]
   $ hg resolve -m --all
   (no more unresolved files)
   continue: hg histedit --continue
   $ hg histedit --cont
   merging foo
   warning: conflicts while merging foo! (edit, then use 'hg resolve --mark')
   Editing (6f2f0241f119), you may commit or record as needed now.
   (hg histedit --continue to resume)
   [1]
   $ hg resolve -m --all
   (no more unresolved files)
   continue: hg histedit --continue
   $ hg commit --amend -m 'reject this fold'
   abort: histedit in progress
   (use 'hg histedit --continue' or 'hg histedit --abort')
   [255]
 
 With markers enabled, histedit does not get confused, and
 amend should not be blocked by the ongoing histedit.
 
   $ cat >>$HGRCPATH <<EOF
   > [experimental]
   > evolution=createmarkers,allowunstable
   > EOF
   $ hg commit --amend -m 'allow this fold'
   $ hg histedit --continue
 
   $ cd ..
 
 Test autoverb feature
 
   $ hg init autoverb
   $ cd autoverb
   $ echo alpha >> alpha
   $ hg ci -qAm one
   $ echo alpha >> alpha
   $ hg ci -qm two
   $ echo beta >> beta
   $ hg ci -qAm "roll! one"
 
   $ hg log --style compact --graph
   @  2[tip]   4f34d0f8b5fa   1970-01-01 00:00 +0000   test
   |    roll! one
   |
   o  1   579e40513370   1970-01-01 00:00 +0000   test
   |    two
   |
   o  0   6058cbb6cfd7   1970-01-01 00:00 +0000   test
        one
   
 
 Check that 'roll' is selected by default
 
   $ HGEDITOR=cat hg histedit 0 --config experimental.histedit.autoverb=True
   pick 6058cbb6cfd7 0 one
   roll 4f34d0f8b5fa 2 roll! one
   pick 579e40513370 1 two
   
   # Edit history between 6058cbb6cfd7 and 4f34d0f8b5fa
   #
   # Commits are listed from least to most recent
   #
   # You can reorder changesets by reordering the lines
   #
   # Commands:
   #
   #  e, edit = use commit, but stop for amending
   #  m, mess = edit commit message without changing commit content
   #  p, pick = use commit
   #  d, drop = remove commit from history
   #  f, fold = use commit, but combine it with the one above
-  #  r, roll = like fold, but discard this commit's description
+  #  r, roll = like fold, but discard this commit's description and date
   #
 
   $ cd ..

tests/test-histedit-bookmark-motion.t

@@ -1,186 +1,186
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > EOF
 
   $ hg init r
   $ cd r
 
   $ for x in a b c d e f ; do
   >     echo $x > $x
   >     hg add $x
   >     hg ci -m $x
   > done
 
   $ hg book -r 1 will-move-backwards
   $ hg book -r 2 two
   $ hg book -r 2 also-two
   $ hg book -r 3 three
   $ hg book -r 4 four
   $ hg book -r tip five
   $ hg log --graph
   @  changeset:   5:652413bf663e
   |  bookmark:    five
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   4:e860deea161a
   |  bookmark:    four
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   3:055a42cdd887
   |  bookmark:    three
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   2:177f92b77385
   |  bookmark:    also-two
   |  bookmark:    two
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   1:d2ae7f538514
   |  bookmark:    will-move-backwards
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
   $ HGEDITOR=cat hg histedit 1
   pick d2ae7f538514 1 b
   pick 177f92b77385 2 c
   pick 055a42cdd887 3 d
   pick e860deea161a 4 e
   pick 652413bf663e 5 f
   
   # Edit history between d2ae7f538514 and 652413bf663e
   #
   # Commits are listed from least to most recent
   #
   # You can reorder changesets by reordering the lines
   #
   # Commands:
   #
   #  e, edit = use commit, but stop for amending
   #  m, mess = edit commit message without changing commit content
   #  p, pick = use commit
   #  d, drop = remove commit from history
   #  f, fold = use commit, but combine it with the one above
-  #  r, roll = like fold, but discard this commit's description
+  #  r, roll = like fold, but discard this commit's description and date
   #
   $ hg histedit 1 --commands - --verbose << EOF | grep histedit
   > pick 177f92b77385 2 c
   > drop d2ae7f538514 1 b
   > pick 055a42cdd887 3 d
   > fold e860deea161a 4 e
   > pick 652413bf663e 5 f
   > EOF
   saved backup bundle to $TESTTMP/r/.hg/strip-backup/96e494a2d553-3c6c5d92-backup.hg (glob)
   histedit: moving bookmarks also-two from 177f92b77385 to b346ab9a313d
   histedit: moving bookmarks five from 652413bf663e to cacdfd884a93
   histedit: moving bookmarks four from e860deea161a to 59d9f330561f
   histedit: moving bookmarks three from 055a42cdd887 to 59d9f330561f
   histedit: moving bookmarks two from 177f92b77385 to b346ab9a313d
   histedit: moving bookmarks will-move-backwards from d2ae7f538514 to cb9a9f314b8b
   saved backup bundle to $TESTTMP/r/.hg/strip-backup/d2ae7f538514-48787b8d-backup.hg (glob)
   $ hg log --graph
   @  changeset:   3:cacdfd884a93
   |  bookmark:    five
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   2:59d9f330561f
   |  bookmark:    four
   |  bookmark:    three
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   1:b346ab9a313d
   |  bookmark:    also-two
   |  bookmark:    two
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   0:cb9a9f314b8b
      bookmark:    will-move-backwards
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
   $ HGEDITOR=cat hg histedit 1
   pick b346ab9a313d 1 c
   pick 59d9f330561f 2 d
   pick cacdfd884a93 3 f
   
   # Edit history between b346ab9a313d and cacdfd884a93
   #
   # Commits are listed from least to most recent
   #
   # You can reorder changesets by reordering the lines
   #
   # Commands:
   #
   #  e, edit = use commit, but stop for amending
   #  m, mess = edit commit message without changing commit content
   #  p, pick = use commit
   #  d, drop = remove commit from history
   #  f, fold = use commit, but combine it with the one above
-  #  r, roll = like fold, but discard this commit's description
+  #  r, roll = like fold, but discard this commit's description and date
   #
   $ hg histedit 1 --commands - --verbose << EOF | grep histedit
   > pick b346ab9a313d 1 c
   > pick cacdfd884a93 3 f
   > pick 59d9f330561f 2 d
   > EOF
   histedit: moving bookmarks five from cacdfd884a93 to c04e50810e4b
   histedit: moving bookmarks four from 59d9f330561f to c04e50810e4b
   histedit: moving bookmarks three from 59d9f330561f to c04e50810e4b
   saved backup bundle to $TESTTMP/r/.hg/strip-backup/59d9f330561f-073008af-backup.hg (glob)
 
 We expect 'five' to stay at tip, since the tipmost bookmark is most
 likely the useful signal.
 
   $ hg log --graph
   @  changeset:   3:c04e50810e4b
   |  bookmark:    five
   |  bookmark:    four
   |  bookmark:    three
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   2:c13eb81022ca
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   1:b346ab9a313d
   |  bookmark:    also-two
   |  bookmark:    two
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   0:cb9a9f314b8b
      bookmark:    will-move-backwards
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   

tests/test-histedit-commute.t

@@ -1,454 +1,454
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > EOF
 
   $ initrepo ()
   > {
   >     hg init r
   >     cd r
   >     for x in a b c d e f ; do
   >         echo $x > $x
   >         hg add $x
   >         hg ci -m $x
   >     done
   > }
 
   $ initrepo
 
 log before edit
   $ hg log --graph
   @  changeset:   5:652413bf663e
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   4:e860deea161a
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   3:055a42cdd887
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   2:177f92b77385
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
 show the edit commands offered
   $ HGEDITOR=cat hg histedit 177f92b77385
   pick 177f92b77385 2 c
   pick 055a42cdd887 3 d
   pick e860deea161a 4 e
   pick 652413bf663e 5 f
   
   # Edit history between 177f92b77385 and 652413bf663e
   #
   # Commits are listed from least to most recent
   #
   # You can reorder changesets by reordering the lines
   #
   # Commands:
   #
   #  e, edit = use commit, but stop for amending
   #  m, mess = edit commit message without changing commit content
   #  p, pick = use commit
   #  d, drop = remove commit from history
   #  f, fold = use commit, but combine it with the one above
-  #  r, roll = like fold, but discard this commit's description
+  #  r, roll = like fold, but discard this commit's description and date
   #
 
 edit the history
 (use a hacky editor to check histedit-last-edit.txt backup)
 
   $ EDITED="$TESTTMP/editedhistory"
   $ cat > $EDITED <<EOF
   > edit 177f92b77385 c
   > pick e860deea161a e
   > pick 652413bf663e f
   > pick 055a42cdd887 d
   > EOF
   $ HGEDITOR="cat \"$EDITED\" > " hg histedit 177f92b77385 2>&1 | fixbundle
   0 files updated, 0 files merged, 4 files removed, 0 files unresolved
   Editing (177f92b77385), you may commit or record as needed now.
   (hg histedit --continue to resume)
 
 rules should end up in .hg/histedit-last-edit.txt:
   $ cat .hg/histedit-last-edit.txt
   edit 177f92b77385 c
   pick e860deea161a e
   pick 652413bf663e f
   pick 055a42cdd887 d
 
   $ hg histedit --abort
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cat > $EDITED <<EOF
   > pick 177f92b77385 c
   > pick e860deea161a e
   > pick 652413bf663e f
   > pick 055a42cdd887 d
   > EOF
   $ HGEDITOR="cat \"$EDITED\" > " hg histedit 177f92b77385 2>&1 | fixbundle
 
 log after edit
   $ hg log --graph
   @  changeset:   5:07114f51870f
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   4:8ade9693061e
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   3:d8249471110a
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   2:177f92b77385
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
 put things back
 
   $ hg histedit 177f92b77385 --commands - 2>&1 << EOF | fixbundle
   > pick 177f92b77385 c
   > pick 07114f51870f d
   > pick d8249471110a e
   > pick 8ade9693061e f
   > EOF
 
   $ hg log --graph
   @  changeset:   5:7eca9b5b1148
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   4:915da888f2de
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   3:10517e47bbbb
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   2:177f92b77385
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
 slightly different this time
 
   $ hg histedit 177f92b77385 --commands - << EOF 2>&1 | fixbundle
   > pick 10517e47bbbb d
   > pick 7eca9b5b1148 f
   > pick 915da888f2de e
   > pick 177f92b77385 c
   > EOF
   $ hg log --graph
   @  changeset:   5:38b92f448761
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   4:de71b079d9ce
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   3:be9ae3a309c6
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   2:799205341b6b
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
 keep prevents stripping dead revs
   $ hg histedit 799205341b6b --keep --commands - 2>&1 << EOF | fixbundle
   > pick 799205341b6b d
   > pick be9ae3a309c6 f
   > pick 38b92f448761 c
   > pick de71b079d9ce e
   > EOF
   $ hg log --graph
   @  changeset:   7:803ef1c6fcfd
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   6:ece0b8d93dda
   |  parent:      3:be9ae3a309c6
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   | o  changeset:   5:38b92f448761
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     c
   | |
   | o  changeset:   4:de71b079d9ce
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     e
   |
   o  changeset:   3:be9ae3a309c6
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   2:799205341b6b
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
 try with --rev
   $ hg histedit --commands - --rev -2 2>&1 <<EOF | fixbundle
   > pick de71b079d9ce e
   > pick 38b92f448761 c
   > EOF
   hg: parse error: pick "de71b079d9ce" changeset was not a candidate
   (only use listed changesets)
   $ hg log --graph
   @  changeset:   7:803ef1c6fcfd
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   6:ece0b8d93dda
   |  parent:      3:be9ae3a309c6
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   | o  changeset:   5:38b92f448761
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     c
   | |
   | o  changeset:   4:de71b079d9ce
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     e
   |
   o  changeset:   3:be9ae3a309c6
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   2:799205341b6b
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 Verify that revsetalias entries work with histedit:
   $ cat >> $HGRCPATH <<EOF
   > [revsetalias]
   > grandparent(ARG) = p1(p1(ARG))
   > EOF
   $ echo extra commit >> c
   $ hg ci -m 'extra commit to c'
   $ HGEDITOR=cat hg histedit 'grandparent(.)'
   pick ece0b8d93dda 6 c
   pick 803ef1c6fcfd 7 e
   pick 9c863c565126 8 extra commit to c
   
   # Edit history between ece0b8d93dda and 9c863c565126
   #
   # Commits are listed from least to most recent
   #
   # You can reorder changesets by reordering the lines
   #
   # Commands:
   #
   #  e, edit = use commit, but stop for amending
   #  m, mess = edit commit message without changing commit content
   #  p, pick = use commit
   #  d, drop = remove commit from history
   #  f, fold = use commit, but combine it with the one above
-  #  r, roll = like fold, but discard this commit's description
+  #  r, roll = like fold, but discard this commit's description and date
   #
 
 should also work if a commit message is missing
   $ BUNDLE="$TESTDIR/missing-comment.hg"
   $ hg init missing
   $ cd missing
   $ hg unbundle $BUNDLE
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 3 changes to 1 files
   (run 'hg update' to get a working copy)
   $ hg co tip
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log --graph
   @  changeset:   2:bd22688093b3
   |  tag:         tip
   |  user:        Robert Altman <[e-mail]>
   |  date:        Mon Nov 28 16:40:04 2011 +0000
   |  summary:     Update file.
   |
   o  changeset:   1:3b3e956f9171
   |  user:        Robert Altman <[e-mail]>
   |  date:        Mon Nov 28 16:37:57 2011 +0000
   |
   o  changeset:   0:141947992243
      user:        Robert Altman <[e-mail]>
      date:        Mon Nov 28 16:35:28 2011 +0000
      summary:     Checked in text file
   
   $ hg histedit 0
   $ cd ..
 
   $ cd ..
 
 
 Test to make sure folding renames doesn't cause bogus conflicts (issue4251):
   $ hg init issue4251
   $ cd issue4251
 
   $ mkdir initial-dir
   $ echo foo > initial-dir/initial-file
   $ hg add initial-dir/initial-file
   $ hg commit -m "initial commit"
 
 Move the file to a new directory, and in the same commit, change its content:
   $ mkdir another-dir
   $ hg mv initial-dir/initial-file another-dir/
   $ echo changed > another-dir/initial-file
   $ hg commit -m "moved and changed"
 
 Rename the file:
   $ hg mv another-dir/initial-file another-dir/renamed-file
   $ hg commit -m "renamed"
 
 Now, let's try to fold the second commit into the first:
   $ cat > editor.sh <<EOF
   > #!/bin/sh
   > cat > \$1 <<ENDOF
   > pick b0f4233702ca 0 initial commit
   > fold 5e8704a8f2d2 1 moved and changed
   > pick 40e7299e8fa7 2 renamed
   > ENDOF
   > EOF
 
   $ HGEDITOR="sh ./editor.sh" hg histedit 0
   saved backup bundle to $TESTTMP/issue4251/.hg/strip-backup/*-backup.hg (glob)
   saved backup bundle to $TESTTMP/issue4251/.hg/strip-backup/*-backup.hg (glob)
 
   $ hg --config diff.git=yes export 0
   # HG changeset patch
   # User test
   # Date 0 0
   #      Thu Jan 01 00:00:00 1970 +0000
   # Node ID fffadc26f8f85623ce60b028a3f1ccc3730f8530
   # Parent  0000000000000000000000000000000000000000
   pick b0f4233702ca 0 initial commit
   fold 5e8704a8f2d2 1 moved and changed
   pick 40e7299e8fa7 2 renamed
   
   diff --git a/another-dir/initial-file b/another-dir/initial-file
   new file mode 100644
   --- /dev/null
   +++ b/another-dir/initial-file
   @@ -0,0 +1,1 @@
   +changed
 
   $ hg --config diff.git=yes export 1
   # HG changeset patch
   # User test
   # Date 0 0
   #      Thu Jan 01 00:00:00 1970 +0000
   # Node ID 9b730d82b00af8a2766facebfa47cc124405a118
   # Parent  fffadc26f8f85623ce60b028a3f1ccc3730f8530
   renamed
   
   diff --git a/another-dir/initial-file b/another-dir/renamed-file
   rename from another-dir/initial-file
   rename to another-dir/renamed-file
 
   $ cd ..

tests/test-histedit-edit.t

@@ -1,482 +1,482
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > strip=
   > EOF
 
   $ initrepo ()
   > {
   >     hg init r
   >     cd r
   >     for x in a b c d e f g; do
   >         echo $x > $x
   >         hg add $x
   >         hg ci -m $x
   >     done
   > }
 
   $ initrepo
 
 log before edit
   $ hg log --graph
   @  changeset:   6:3c6a8ed2ebe8
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     g
   |
   o  changeset:   5:652413bf663e
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   4:e860deea161a
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     e
   |
   o  changeset:   3:055a42cdd887
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   2:177f92b77385
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 dirty a file
   $ echo a > g
   $ hg histedit 177f92b77385 --commands - 2>&1 << EOF
   > EOF
   abort: uncommitted changes
   [255]
   $ echo g > g
 
 edit the history
   $ hg histedit 177f92b77385 --commands - 2>&1 << EOF| fixbundle
   > pick 177f92b77385 c
   > pick 055a42cdd887 d
   > edit e860deea161a e
   > pick 652413bf663e f
   > pick 3c6a8ed2ebe8 g
   > EOF
   0 files updated, 0 files merged, 3 files removed, 0 files unresolved
   Editing (e860deea161a), you may commit or record as needed now.
   (hg histedit --continue to resume)
 
 try to update and get an error
   $ hg update tip
   abort: histedit in progress
   (use 'hg histedit --continue' or 'hg histedit --abort')
   [255]
 
 edit the plan via the editor
   $ cat >> $TESTTMP/editplan.sh <<EOF
   > cat > \$1 <<EOF2
   > drop e860deea161a e
   > drop 652413bf663e f
   > drop 3c6a8ed2ebe8 g
   > EOF2
   > EOF
   $ HGEDITOR="sh $TESTTMP/editplan.sh" hg histedit --edit-plan
   $ cat .hg/histedit-state
   v1
   055a42cdd88768532f9cf79daa407fc8d138de9b
   3c6a8ed2ebe862cc949d2caa30775dd6f16fb799
   False
   3
   drop
   e860deea161a2f77de56603b340ebbb4536308ae
   drop
   652413bf663ef2a641cab26574e46d5f5a64a55a
   drop
   3c6a8ed2ebe862cc949d2caa30775dd6f16fb799
   0
   strip-backup/177f92b77385-0ebe6a8f-histedit.hg
 
 edit the plan via --commands
   $ hg histedit --edit-plan --commands - 2>&1 << EOF
   > edit e860deea161a e
   > pick 652413bf663e f
   > drop 3c6a8ed2ebe8 g
   > EOF
   $ cat .hg/histedit-state
   v1
   055a42cdd88768532f9cf79daa407fc8d138de9b
   3c6a8ed2ebe862cc949d2caa30775dd6f16fb799
   False
   3
   edit
   e860deea161a2f77de56603b340ebbb4536308ae
   pick
   652413bf663ef2a641cab26574e46d5f5a64a55a
   drop
   3c6a8ed2ebe862cc949d2caa30775dd6f16fb799
   0
   strip-backup/177f92b77385-0ebe6a8f-histedit.hg
 
 Go at a random point and try to continue
 
   $ hg id -n
   3+
   $ hg up 0
   abort: histedit in progress
   (use 'hg histedit --continue' or 'hg histedit --abort')
   [255]
 
 Try to delete necessary commit
   $ hg strip -r 652413b
   abort: histedit in progress, can't strip 652413bf663e
   [255]
 
 commit, then edit the revision
   $ hg ci -m 'wat'
   created new head
   $ echo a > e
 
 qnew should fail while we're in the middle of the edit step
 
   $ hg --config extensions.mq= qnew please-fail
   abort: histedit in progress
   (use 'hg histedit --continue' or 'hg histedit --abort')
   [255]
   $ HGEDITOR='echo foobaz > ' hg histedit --continue 2>&1 | fixbundle
 
   $ hg log --graph
   @  changeset:   6:b5f70786f9b0
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     f
   |
   o  changeset:   5:a5e1ba2f7afb
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     foobaz
   |
   o  changeset:   4:1a60820cd1f6
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     wat
   |
   o  changeset:   3:055a42cdd887
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     d
   |
   o  changeset:   2:177f92b77385
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     c
   |
   o  changeset:   1:d2ae7f538514
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     b
   |
   o  changeset:   0:cb9a9f314b8b
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
 
   $ hg cat e
   a
 
 Stripping necessary commits should not break --abort
 
   $ hg histedit 1a60820cd1f6 --commands - 2>&1 << EOF| fixbundle
   > edit 1a60820cd1f6 wat
   > pick a5e1ba2f7afb foobaz
   > pick b5f70786f9b0 g
   > EOF
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   Editing (1a60820cd1f6), you may commit or record as needed now.
   (hg histedit --continue to resume)
 
   $ mv .hg/histedit-state .hg/histedit-state.bak
   $ hg strip -q -r b5f70786f9b0
   $ mv .hg/histedit-state.bak .hg/histedit-state
   $ hg histedit --abort
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 3 files
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg log -r .
   changeset:   6:b5f70786f9b0
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     f
   
 
 check histedit_source
 
   $ hg log --debug --rev 5
   changeset:   5:a5e1ba2f7afb899ef1581cea528fd885d2fca70d
   phase:       draft
   parent:      4:1a60820cd1f6004a362aa622ebc47d59bc48eb34
   parent:      -1:0000000000000000000000000000000000000000
   manifest:    5:5ad3be8791f39117565557781f5464363b918a45
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   files:       e
   extra:       branch=default
   extra:       histedit_source=e860deea161a2f77de56603b340ebbb4536308ae
   description:
   foobaz
   
   
 
   $ hg histedit tip --commands - 2>&1 <<EOF| fixbundle
   > edit b5f70786f9b0 f
   > EOF
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   Editing (b5f70786f9b0), you may commit or record as needed now.
   (hg histedit --continue to resume)
   $ hg status
   A f
 
   $ hg summary
   parent: 5:a5e1ba2f7afb 
    foobaz
   branch: default
   commit: 1 added (new branch head)
   update: 1 new changesets (update)
   phases: 7 draft
   hist:   1 remaining (histedit --continue)
 
 (test also that editor is invoked if histedit is continued for
 "edit" action)
 
   $ HGEDITOR='cat' hg histedit --continue
   f
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: added f
   saved backup bundle to $TESTTMP/r/.hg/strip-backup/b5f70786f9b0-c28d9c86-backup.hg (glob)
 
   $ hg status
 
 log after edit
   $ hg log --limit 1
   changeset:   6:a107ee126658
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     f
   
 
 say we'll change the message, but don't.
   $ cat > ../edit.sh <<EOF
   > cat "\$1" | sed s/pick/mess/ > tmp
   > mv tmp "\$1"
   > EOF
   $ HGEDITOR="sh ../edit.sh" hg histedit tip 2>&1 | fixbundle
   $ hg status
   $ hg log --limit 1
   changeset:   6:1fd3b2fe7754
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     f
   
 
 modify the message
 
 check saving last-message.txt, at first
 
   $ cat > $TESTTMP/commitfailure.py <<EOF
   > from mercurial import error
   > def reposetup(ui, repo):
   >     class commitfailure(repo.__class__):
   >         def commit(self, *args, **kwargs):
   >             raise error.Abort('emulating unexpected abort')
   >     repo.__class__ = commitfailure
   > EOF
   $ cat >> .hg/hgrc <<EOF
   > [extensions]
   > # this failure occurs before editor invocation
   > commitfailure = $TESTTMP/commitfailure.py
   > EOF
 
   $ cat > $TESTTMP/editor.sh <<EOF
   > echo "==== before editing"
   > cat \$1
   > echo "===="
   > echo "check saving last-message.txt" >> \$1
   > EOF
 
 (test that editor is not invoked before transaction starting)
 
   $ rm -f .hg/last-message.txt
   $ HGEDITOR="sh $TESTTMP/editor.sh" hg histedit tip --commands - 2>&1 << EOF | fixbundle
   > mess 1fd3b2fe7754 f
   > EOF
   abort: emulating unexpected abort
   $ test -f .hg/last-message.txt
   [1]
 
   $ cat >> .hg/hgrc <<EOF
   > [extensions]
   > commitfailure = !
   > EOF
   $ hg histedit --abort -q
 
 (test that editor is invoked and commit message is saved into
 "last-message.txt")
 
   $ cat >> .hg/hgrc <<EOF
   > [hooks]
   > # this failure occurs after editor invocation
   > pretxncommit.unexpectedabort = false
   > EOF
 
   $ hg status --rev '1fd3b2fe7754^1' --rev 1fd3b2fe7754
   A f
 
   $ rm -f .hg/last-message.txt
   $ HGEDITOR="sh $TESTTMP/editor.sh" hg histedit tip --commands - 2>&1 << EOF
   > mess 1fd3b2fe7754 f
   > EOF
   ==== before editing
   f
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: added f
   ====
   note: commit message saved in .hg/last-message.txt
   transaction abort!
   rollback completed
   abort: pretxncommit.unexpectedabort hook exited with status 1
   [255]
   $ cat .hg/last-message.txt
   f
   
   
   check saving last-message.txt
 
 (test also that editor is invoked if histedit is continued for "message"
 action)
 
   $ HGEDITOR=cat hg histedit --continue
   f
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: added f
   note: commit message saved in .hg/last-message.txt
   transaction abort!
   rollback completed
   abort: pretxncommit.unexpectedabort hook exited with status 1
   [255]
 
   $ cat >> .hg/hgrc <<EOF
   > [hooks]
   > pretxncommit.unexpectedabort =
   > EOF
   $ hg histedit --abort -q
 
 then, check "modify the message" itself
 
   $ hg histedit tip --commands - 2>&1 << EOF | fixbundle
   > mess 1fd3b2fe7754 f
   > EOF
   $ hg status
   $ hg log --limit 1
   changeset:   6:62feedb1200e
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     f
   
 
 rollback should not work after a histedit
   $ hg rollback
   no rollback information available
   [1]
 
   $ cd ..
   $ hg clone -qr0 r r0
   $ cd r0
   $ hg phase -fdr0
   $ hg histedit --commands - 0 2>&1 << EOF
   > edit cb9a9f314b8b a > $EDITED
   > EOF
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   adding a
   Editing (cb9a9f314b8b), you may commit or record as needed now.
   (hg histedit --continue to resume)
   [1]
   $ HGEDITOR=true hg histedit --continue
   saved backup bundle to $TESTTMP/r0/.hg/strip-backup/cb9a9f314b8b-cc5ccb0b-backup.hg (glob)
 
   $ hg log -G
   @  changeset:   0:0efcea34f18a
      tag:         tip
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     a
   
   $ echo foo >> b
   $ hg addr
   adding b
   $ hg ci -m 'add b'
   $ echo foo >> a
   $ hg ci -m 'extend a'
   $ hg phase --public 1
 Attempting to fold a change into a public change should not work:
   $ cat > ../edit.sh <<EOF
   > cat "\$1" | sed s/pick/fold/ > tmp
   > mv tmp "\$1"
   > EOF
   $ HGEDITOR="sh ../edit.sh" hg histedit 2
   warning: histedit rules saved to: .hg/histedit-last-edit.txt
   hg: parse error: cannot fold into public change 18aa70c8ad22
   [255]
   $ cat .hg/histedit-last-edit.txt
   fold 0012be4a27ea 2 extend a
   
   # Edit history between 0012be4a27ea and 0012be4a27ea
   #
   # Commits are listed from least to most recent
   #
   # You can reorder changesets by reordering the lines
   #
   # Commands:
   #
   #  e, edit = use commit, but stop for amending
   #  m, mess = edit commit message without changing commit content
   #  p, fold = use commit
   #  d, drop = remove commit from history
   #  f, fold = use commit, but combine it with the one above
-  #  r, roll = like fold, but discard this commit's description
+  #  r, roll = like fold, but discard this commit's description and date
   #

tests/test-histedit-fold-non-commute.t

@@ -1,344 +1,344
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > EOF
 
   $ modwithdate ()
   > {
   >     echo $1 > $1
   >     hg ci -m $1 -d "$2 0"
   > }
 
   $ initrepo ()
   > {
   >     hg init $1
   >     cd $1
   >     for x in a b c d e f ; do
   >         echo $x$x$x$x$x > $x
   >         hg add $x
   >     done
   >     hg ci -m 'Initial commit'
   >     modwithdate a 1
   >     modwithdate b 2
   >     modwithdate c 3
   >     modwithdate d 4
   >     modwithdate e 5
   >     modwithdate f 6
   >     echo 'I can haz no commute' > e
   >     hg ci -m 'does not commute with e' -d '7 0'
   >     cd ..
   > }
 
   $ initrepo r
   $ cd r
 Initial generation of the command files
 
   $ EDITED="$TESTTMP/editedhistory"
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 3 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 4 >> $EDITED
   $ hg log --template 'fold {node|short} {rev} {desc}\n' -r 7 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 5 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 6 >> $EDITED
   $ cat $EDITED
   pick 092e4ce14829 3 c
   pick ae78f4c9d74f 4 d
   fold 42abbb61bede 7 does not commute with e
   pick 7f3755409b00 5 e
   pick dd184f2faeb0 6 f
 
 log before edit
   $ hg log --graph
   @  changeset:   7:42abbb61bede
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:07 1970 +0000
   |  summary:     does not commute with e
   |
   o  changeset:   6:dd184f2faeb0
   |  user:        test
   |  date:        Thu Jan 01 00:00:06 1970 +0000
   |  summary:     f
   |
   o  changeset:   5:7f3755409b00
   |  user:        test
   |  date:        Thu Jan 01 00:00:05 1970 +0000
   |  summary:     e
   |
   o  changeset:   4:ae78f4c9d74f
   |  user:        test
   |  date:        Thu Jan 01 00:00:04 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:092e4ce14829
   |  user:        test
   |  date:        Thu Jan 01 00:00:03 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:40ccdd8beb95
   |  user:        test
   |  date:        Thu Jan 01 00:00:02 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:cd997a145b29
   |  user:        test
   |  date:        Thu Jan 01 00:00:01 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 edit the history
   $ hg histedit 3 --commands $EDITED 2>&1 | fixbundle
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change (fold 42abbb61bede)
   (hg histedit --continue to resume)
 
 fix up
   $ echo 'I can haz no commute' > e
   $ hg resolve --mark e
   (no more unresolved files)
   continue: hg histedit --continue
   $ HGEDITOR=cat hg histedit --continue 2>&1 | fixbundle | grep -v '2 files removed'
   d
   ***
   does not commute with e
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: changed d
   HG: changed e
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change (pick 7f3755409b00)
   (hg histedit --continue to resume)
 
 just continue this time
 keep the non-commuting change, and thus the pending change will be dropped
   $ hg revert -r 'p1()' e
   $ hg resolve --mark e
   (no more unresolved files)
   continue: hg histedit --continue
   $ hg diff
   $ hg histedit --continue 2>&1 | fixbundle
   7f3755409b00: skipping changeset (no changes)
 
 log after edit
   $ hg log --graph
   @  changeset:   5:1300355b1a54
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:06 1970 +0000
   |  summary:     f
   |
   o  changeset:   4:e2ac33269083
   |  user:        test
   |  date:        Thu Jan 01 00:00:07 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:092e4ce14829
   |  user:        test
   |  date:        Thu Jan 01 00:00:03 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:40ccdd8beb95
   |  user:        test
   |  date:        Thu Jan 01 00:00:02 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:cd997a145b29
   |  user:        test
   |  date:        Thu Jan 01 00:00:01 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 contents of e
   $ hg cat e
   I can haz no commute
 
 manifest
   $ hg manifest
   a
   b
   c
   d
   e
   f
 
   $ cd ..
 
-Repeat test using "roll", not "fold". "roll" folds in changes but drops message
+Repeat test using "roll", not "fold". "roll" folds in changes but drops message and date
 
   $ initrepo r2
   $ cd r2
 
 Initial generation of the command files
 
   $ EDITED="$TESTTMP/editedhistory.2"
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 3 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 4 >> $EDITED
   $ hg log --template 'roll {node|short} {rev} {desc}\n' -r 7 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 5 >> $EDITED
   $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 6 >> $EDITED
   $ cat $EDITED
   pick 092e4ce14829 3 c
   pick ae78f4c9d74f 4 d
   roll 42abbb61bede 7 does not commute with e
   pick 7f3755409b00 5 e
   pick dd184f2faeb0 6 f
 
 log before edit
   $ hg log --graph
   @  changeset:   7:42abbb61bede
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:07 1970 +0000
   |  summary:     does not commute with e
   |
   o  changeset:   6:dd184f2faeb0
   |  user:        test
   |  date:        Thu Jan 01 00:00:06 1970 +0000
   |  summary:     f
   |
   o  changeset:   5:7f3755409b00
   |  user:        test
   |  date:        Thu Jan 01 00:00:05 1970 +0000
   |  summary:     e
   |
   o  changeset:   4:ae78f4c9d74f
   |  user:        test
   |  date:        Thu Jan 01 00:00:04 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:092e4ce14829
   |  user:        test
   |  date:        Thu Jan 01 00:00:03 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:40ccdd8beb95
   |  user:        test
   |  date:        Thu Jan 01 00:00:02 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:cd997a145b29
   |  user:        test
   |  date:        Thu Jan 01 00:00:01 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 edit the history
   $ hg histedit 3 --commands $EDITED 2>&1 | fixbundle
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change (roll 42abbb61bede)
   (hg histedit --continue to resume)
 
 fix up
   $ echo 'I can haz no commute' > e
   $ hg resolve --mark e
   (no more unresolved files)
   continue: hg histedit --continue
   $ hg histedit --continue 2>&1 | fixbundle | grep -v '2 files removed'
   merging e
   warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
   Fix up the change (pick 7f3755409b00)
   (hg histedit --continue to resume)
 
 just continue this time
   $ hg revert -r 'p1()' e
   $ hg resolve --mark e
   (no more unresolved files)
   continue: hg histedit --continue
   $ hg histedit --continue 2>&1 | fixbundle
   7f3755409b00: skipping changeset (no changes)
 
 log after edit
   $ hg log --graph
-  @  changeset:   5:162978f027fb
+  @  changeset:   5:b538bcb461be
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:06 1970 +0000
   |  summary:     f
   |
-  o  changeset:   4:74e5e6c6c32f
+  o  changeset:   4:317e37cb6d66
   |  user:        test
-  |  date:        Thu Jan 01 00:00:07 1970 +0000
+  |  date:        Thu Jan 01 00:00:04 1970 +0000
   |  summary:     d
   |
   o  changeset:   3:092e4ce14829
   |  user:        test
   |  date:        Thu Jan 01 00:00:03 1970 +0000
   |  summary:     c
   |
   o  changeset:   2:40ccdd8beb95
   |  user:        test
   |  date:        Thu Jan 01 00:00:02 1970 +0000
   |  summary:     b
   |
   o  changeset:   1:cd997a145b29
   |  user:        test
   |  date:        Thu Jan 01 00:00:01 1970 +0000
   |  summary:     a
   |
   o  changeset:   0:1715188a53c7
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     Initial commit
   
 
 contents of e
   $ hg cat e
   I can haz no commute
 
 manifest
   $ hg manifest
   a
   b
   c
   d
   e
   f
 
 description is taken from rollup target commit
 
   $ hg log --debug --rev 4
-  changeset:   4:74e5e6c6c32fa39f0eeed43302fd48633ea5926f
+  changeset:   4:317e37cb6d66c1c84628c00e5bf4c8c292831951
   phase:       draft
   parent:      3:092e4ce14829f4974399ce4316d59f64ef0b6725
   parent:      -1:0000000000000000000000000000000000000000
   manifest:    4:b068a323d969f22af1296ec6a5ea9384cef437ac
   user:        test
-  date:        Thu Jan 01 00:00:07 1970 +0000
+  date:        Thu Jan 01 00:00:04 1970 +0000
   files:       d e
   extra:       branch=default
   extra:       histedit_source=ae78f4c9d74ffa4b6cb5045001c303fe9204e890,42abbb61bede6f4366fa1e74a664343e5d558a70
   description:
   d
   
   
 
 done with repo r2
 
   $ cd ..

tests/test-histedit-fold.t

@@ -1,543 +1,543
 Test histedit extension: Fold commands
 ======================================
 
 This test file is dedicated to testing the fold command in non conflicting
 case.
 
 Initialization
 ---------------
 
 
   $ . "$TESTDIR/histedit-helpers.sh"
 
   $ cat >> $HGRCPATH <<EOF
   > [alias]
   > logt = log --template '{rev}:{node|short} {desc|firstline}\n'
   > [extensions]
   > histedit=
   > EOF
 
 
 Simple folding
 --------------------
   $ addwithdate ()
   > {
   >     echo $1 > $1
   >     hg add $1
   >     hg ci -m $1 -d "$2 0"
   > }
 
   $ initrepo ()
   > {
   >     hg init r
   >     cd r
   >     addwithdate a 1
   >     addwithdate b 2
   >     addwithdate c 3
   >     addwithdate d 4
   >     addwithdate e 5
   >     addwithdate f 6
   > }
 
   $ initrepo
 
 log before edit
   $ hg logt --graph
   @  5:178e35e0ce73 f
   |
   o  4:1ddb6c90f2ee e
   |
   o  3:532247a8969b d
   |
   o  2:ff2c9fa2018b c
   |
   o  1:97d72e5f12c7 b
   |
   o  0:8580ff50825a a
   
 
   $ hg histedit ff2c9fa2018b --commands - 2>&1 <<EOF | fixbundle
   > pick 1ddb6c90f2ee e
   > pick 178e35e0ce73 f
   > fold ff2c9fa2018b c
   > pick 532247a8969b d
   > EOF
 
 log after edit
   $ hg logt --graph
   @  4:c4d7f3def76d d
   |
   o  3:575228819b7e f
   |
   o  2:505a591af19e e
   |
   o  1:97d72e5f12c7 b
   |
   o  0:8580ff50825a a
   
 
 post-fold manifest
   $ hg manifest
   a
   b
   c
   d
   e
   f
 
 
 check histedit_source, including that it uses the later date, from the first changeset
 
   $ hg log --debug --rev 3
   changeset:   3:575228819b7e6ed69e8c0a6a383ee59a80db7358
   phase:       draft
   parent:      2:505a591af19eed18f560af827b9e03d2076773dc
   parent:      -1:0000000000000000000000000000000000000000
   manifest:    3:81eede616954057198ead0b2c73b41d1f392829a
   user:        test
   date:        Thu Jan 01 00:00:06 1970 +0000
   files+:      c f
   extra:       branch=default
   extra:       histedit_source=7cad1d7030207872dfd1c3a7cb430f24f2884086,ff2c9fa2018b15fa74b33363bda9527323e2a99f
   description:
   f
   ***
   c
   
   
 
-rollup will fold without preserving the folded commit's message
+rollup will fold without preserving the folded commit's message or date
 
   $ OLDHGEDITOR=$HGEDITOR
   $ HGEDITOR=false
   $ hg histedit 97d72e5f12c7 --commands - 2>&1 <<EOF | fixbundle
   > pick 97d72e5f12c7 b
   > roll 505a591af19e e
   > pick 575228819b7e f
   > pick c4d7f3def76d d
   > EOF
 
   $ HGEDITOR=$OLDHGEDITOR
 
 log after edit
   $ hg logt --graph
-  @  3:fb13f1f49340 d
+  @  3:bab801520cec d
   |
-  o  2:6d4bc3727566 f
+  o  2:58c8f2bfc151 f
   |
-  o  1:563995ddbe65 b
+  o  1:5d939c56c72e b
   |
   o  0:8580ff50825a a
   
 
 description is taken from rollup target commit
 
   $ hg log --debug --rev 1
-  changeset:   1:563995ddbe650c0e6b0e1c1d75f0a197b61cec50
+  changeset:   1:5d939c56c72e77e29f5167696218e2131a40f5cf
   phase:       draft
   parent:      0:8580ff50825a50c8f716709acdf8de0deddcd6ab
   parent:      -1:0000000000000000000000000000000000000000
   manifest:    1:b5e112a3a8354e269b1524729f0918662d847c38
   user:        test
-  date:        Thu Jan 01 00:00:05 1970 +0000
+  date:        Thu Jan 01 00:00:02 1970 +0000
   files+:      b e
   extra:       branch=default
   extra:       histedit_source=97d72e5f12c7e84f85064aa72e5a297142c36ed9,505a591af19eed18f560af827b9e03d2076773dc
   description:
   b
   
   
 
 check saving last-message.txt
 
   $ cat > $TESTTMP/abortfolding.py <<EOF
   > from mercurial import util
   > def abortfolding(ui, repo, hooktype, **kwargs):
   >     ctx = repo[kwargs.get('node')]
   >     if set(ctx.files()) == set(['c', 'd', 'f']):
   >         return True # abort folding commit only
   >     ui.warn('allow non-folding commit\\n')
   > EOF
   $ cat > .hg/hgrc <<EOF
   > [hooks]
   > pretxncommit.abortfolding = python:$TESTTMP/abortfolding.py:abortfolding
   > EOF
 
   $ cat > $TESTTMP/editor.sh << EOF
   > echo "==== before editing"
   > cat \$1
   > echo "===="
   > echo "check saving last-message.txt" >> \$1
   > EOF
 
   $ rm -f .hg/last-message.txt
-  $ hg status --rev '6d4bc3727566^1::fb13f1f49340'
+  $ hg status --rev '58c8f2bfc151^1::bab801520cec'
   A c
   A d
   A f
-  $ HGEDITOR="sh $TESTTMP/editor.sh" hg histedit 6d4bc3727566 --commands - 2>&1 <<EOF
-  > pick 6d4bc3727566 f
-  > fold fb13f1f49340 d
+  $ HGEDITOR="sh $TESTTMP/editor.sh" hg histedit 58c8f2bfc151 --commands - 2>&1 <<EOF
+  > pick 58c8f2bfc151 f
+  > fold bab801520cec d
   > EOF
   allow non-folding commit
   ==== before editing
   f
   ***
   c
   ***
   d
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: added c
   HG: added d
   HG: added f
   ====
   transaction abort!
   rollback completed
   abort: pretxncommit.abortfolding hook failed
   [255]
 
   $ cat .hg/last-message.txt
   f
   ***
   c
   ***
   d
   
   
   
   check saving last-message.txt
 
   $ cd ..
   $ rm -r r
 
 folding preserves initial author but uses later date
 ----------------------------------------------------
 
   $ initrepo
 
   $ hg ci -d '7 0' --user "someone else" --amend --quiet
 
 tip before edit
   $ hg log --rev .
   changeset:   5:10c36dd37515
   tag:         tip
   user:        someone else
   date:        Thu Jan 01 00:00:07 1970 +0000
   summary:     f
   
 
   $ hg --config progress.debug=1 --debug \
   > histedit 1ddb6c90f2ee --commands - 2>&1 <<EOF | \
   > egrep 'editing|unresolved'
   > pick 1ddb6c90f2ee e
   > fold 10c36dd37515 f
   > EOF
   editing: pick 1ddb6c90f2ee 4 e 1/2 changes (50.00%)
   editing: fold 10c36dd37515 5 f 2/2 changes (100.00%)
 
 tip after edit, which should use the later date, from the second changeset
   $ hg log --rev .
   changeset:   4:e4f3ec5d0b40
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:07 1970 +0000
   summary:     e
   
 
   $ cd ..
   $ rm -r r
 
 folding and creating no new change doesn't break:
 -------------------------------------------------
 
 folded content is dropped during a merge. The folded commit should properly disappear.
 
   $ mkdir fold-to-empty-test
   $ cd fold-to-empty-test
   $ hg init
   $ printf "1\n2\n3\n" > file
   $ hg add file
   $ hg commit -m '1+2+3'
   $ echo 4 >> file
   $ hg commit -m '+4'
   $ echo 5 >> file
   $ hg commit -m '+5'
   $ echo 6 >> file
   $ hg commit -m '+6'
   $ hg logt --graph
   @  3:251d831eeec5 +6
   |
   o  2:888f9082bf99 +5
   |
   o  1:617f94f13c0f +4
   |
   o  0:0189ba417d34 1+2+3
   
 
   $ hg histedit 1 --commands - << EOF
   > pick 617f94f13c0f 1 +4
   > drop 888f9082bf99 2 +5
   > fold 251d831eeec5 3 +6
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging file
   warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
   Fix up the change (fold 251d831eeec5)
   (hg histedit --continue to resume)
   [1]
 There were conflicts, we keep P1 content. This
 should effectively drop the changes from +6.
   $ hg status
   M file
   ? file.orig
   $ hg resolve -l
   U file
   $ hg revert -r 'p1()' file
   $ hg resolve --mark file
   (no more unresolved files)
   continue: hg histedit --continue
   $ hg histedit --continue
   251d831eeec5: empty changeset
   saved backup bundle to $TESTTMP/*-backup.hg (glob)
   $ hg logt --graph
   @  1:617f94f13c0f +4
   |
   o  0:0189ba417d34 1+2+3
   
 
   $ cd ..
 
 
 Test fold through dropped
 -------------------------
 
 
 Test corner case where folded revision is separated from its parent by a
 dropped revision.
 
 
   $ hg init fold-with-dropped
   $ cd fold-with-dropped
   $ printf "1\n2\n3\n" > file
   $ hg commit -Am '1+2+3'
   adding file
   $ echo 4 >> file
   $ hg commit -m '+4'
   $ echo 5 >> file
   $ hg commit -m '+5'
   $ echo 6 >> file
   $ hg commit -m '+6'
   $ hg logt -G
   @  3:251d831eeec5 +6
   |
   o  2:888f9082bf99 +5
   |
   o  1:617f94f13c0f +4
   |
   o  0:0189ba417d34 1+2+3
   
   $ hg histedit 1 --commands -  << EOF
   > pick 617f94f13c0f 1 +4
   > drop 888f9082bf99 2 +5
   > fold 251d831eeec5 3 +6
   > EOF
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   merging file
   warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
   Fix up the change (fold 251d831eeec5)
   (hg histedit --continue to resume)
   [1]
   $ cat > file << EOF
   > 1
   > 2
   > 3
   > 4
   > 5
   > EOF
   $ hg resolve --mark file
   (no more unresolved files)
   continue: hg histedit --continue
   $ hg commit -m '+5.2'
   created new head
   $ echo 6 >> file
   $ HGEDITOR=cat hg histedit --continue
   +4
   ***
   +5.2
   ***
   +6
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: changed file
   saved backup bundle to $TESTTMP/fold-with-dropped/.hg/strip-backup/55c8d8dc79ce-4066cd98-backup.hg (glob)
   saved backup bundle to $TESTTMP/fold-with-dropped/.hg/strip-backup/617f94f13c0f-a35700fc-backup.hg (glob)
   $ hg logt -G
   @  1:10c647b2cdd5 +4
   |
   o  0:0189ba417d34 1+2+3
   
   $ hg export tip
   # HG changeset patch
   # User test
   # Date 0 0
   #      Thu Jan 01 00:00:00 1970 +0000
   # Node ID 10c647b2cdd54db0603ecb99b2ff5ce66d5a5323
   # Parent  0189ba417d34df9dda55f88b637dcae9917b5964
   +4
   ***
   +5.2
   ***
   +6
   
   diff -r 0189ba417d34 -r 10c647b2cdd5 file
   --- a/file	Thu Jan 01 00:00:00 1970 +0000
   +++ b/file	Thu Jan 01 00:00:00 1970 +0000
   @@ -1,3 +1,6 @@
    1
    2
    3
   +4
   +5
   +6
   $ cd ..
 
 
 Folding with initial rename (issue3729)
 ---------------------------------------
 
   $ hg init fold-rename
   $ cd fold-rename
   $ echo a > a.txt
   $ hg add a.txt
   $ hg commit -m a
   $ hg rename a.txt b.txt
   $ hg commit -m rename
   $ echo b >> b.txt
   $ hg commit -m b
 
   $ hg logt --follow b.txt
   2:e0371e0426bc b
   1:1c4f440a8085 rename
   0:6c795aa153cb a
 
   $ hg histedit 1c4f440a8085 --commands - 2>&1 << EOF | fixbundle
   > pick 1c4f440a8085 rename
   > fold e0371e0426bc b
   > EOF
 
   $ hg logt --follow b.txt
   1:cf858d235c76 rename
   0:6c795aa153cb a
 
   $ cd ..
 
 Folding with swapping
 ---------------------
 
 This is an excuse to test hook with histedit temporary commit (issue4422)
 
 
   $ hg init issue4422
   $ cd issue4422
   $ echo a > a.txt
   $ hg add a.txt
   $ hg commit -m a
   $ echo b > b.txt
   $ hg add b.txt
   $ hg commit -m b
   $ echo c > c.txt
   $ hg add c.txt
   $ hg commit -m c
 
   $ hg logt
   2:a1a953ffb4b0 c
   1:199b6bb90248 b
   0:6c795aa153cb a
 
 Setup the proper environment variable symbol for the platform, to be subbed
 into the hook command.
 #if windows
   $ NODE="%HG_NODE%"
 #else
   $ NODE="\$HG_NODE"
 #endif
   $ hg histedit 6c795aa153cb --config hooks.commit="echo commit $NODE" --commands - 2>&1 << EOF | fixbundle
   > pick 199b6bb90248 b
   > fold a1a953ffb4b0 c
   > pick 6c795aa153cb a
   > EOF
   commit 9599899f62c05f4377548c32bf1c9f1a39634b0c
 
   $ hg logt
   1:9599899f62c0 a
   0:79b99e9c8e49 b
 
   $ echo "foo" > amended.txt
   $ hg add amended.txt
   $ hg ci -q --config extensions.largefiles= --amend -I amended.txt
 
 Test that folding multiple changes in a row doesn't show multiple
 editors.
 
   $ echo foo >> foo
   $ hg add foo
   $ hg ci -m foo1
   $ echo foo >> foo
   $ hg ci -m foo2
   $ echo foo >> foo
   $ hg ci -m foo3
   $ hg logt
   4:21679ff7675c foo3
   3:b7389cc4d66e foo2
   2:0e01aeef5fa8 foo1
   1:578c7455730c a
   0:79b99e9c8e49 b
   $ cat > "$TESTTMP/editor.sh" <<EOF
   > echo ran editor >> "$TESTTMP/editorlog.txt"
   > cat \$1 >> "$TESTTMP/editorlog.txt"
   > echo END >> "$TESTTMP/editorlog.txt"
   > echo merged foos > \$1
   > EOF
   $ HGEDITOR="sh \"$TESTTMP/editor.sh\"" hg histedit 1 --commands - 2>&1 <<EOF | fixbundle
   > pick 578c7455730c 1 a
   > pick 0e01aeef5fa8 2 foo1
   > fold b7389cc4d66e 3 foo2
   > fold 21679ff7675c 4 foo3
   > EOF
   $ hg logt
   2:e8bedbda72c1 merged foos
   1:578c7455730c a
   0:79b99e9c8e49 b
 Editor should have run only once
   $ cat $TESTTMP/editorlog.txt
   ran editor
   foo1
   ***
   foo2
   ***
   foo3
   
   
   
   HG: Enter commit message.  Lines beginning with 'HG:' are removed.
   HG: Leave message empty to abort commit.
   HG: --
   HG: user: test
   HG: branch 'default'
   HG: added foo
   END
 
   $ cd ..

tests/test-histedit-obsolete.t

@@ -1,505 +1,505
   $ . "$TESTDIR/histedit-helpers.sh"
 
 Enable obsolete
 
   $ cat >> $HGRCPATH << EOF
   > [ui]
   > logtemplate= {rev}:{node|short} {desc|firstline}
   > [phases]
   > publish=False
   > [experimental]
   > evolution=createmarkers,allowunstable
   > [extensions]
   > histedit=
   > rebase=
   > EOF
 
 Test that histedit learns about obsolescence not stored in histedit state
   $ hg init boo
   $ cd boo
   $ echo a > a
   $ hg ci -Am a
   adding a
   $ echo a > b
   $ echo a > c
   $ echo a > c
   $ hg ci -Am b
   adding b
   adding c
   $ echo a > d
   $ hg ci -Am c
   adding d
   $ echo "pick `hg log -r 0 -T '{node|short}'`" > plan
   $ echo "pick `hg log -r 2 -T '{node|short}'`" >> plan
   $ echo "edit `hg log -r 1 -T '{node|short}'`" >> plan
   $ hg histedit -r 'all()' --commands plan
   Editing (1b2d564fad96), you may commit or record as needed now.
   (hg histedit --continue to resume)
   [1]
   $ hg st
   A b
   A c
   ? plan
   $ hg commit --amend b
   $ hg histedit --continue
   $ hg log -G
   @  6:46abc7c4d873 b
   |
   o  5:49d44ab2be1b c
   |
   o  0:cb9a9f314b8b a
   
   $ hg debugobsolete
   e72d22b19f8ecf4150ab4f91d0973fd9955d3ddf 49d44ab2be1b67a79127568a67c9c99430633b48 0 (*) {'user': 'test'} (glob)
   3e30a45cf2f719e96ab3922dfe039cfd047956ce 0 {e72d22b19f8ecf4150ab4f91d0973fd9955d3ddf} (*) {'user': 'test'} (glob)
   1b2d564fad96311b45362f17c2aa855150efb35f 46abc7c4d8738e8563e577f7889e1b6db3da4199 0 (*) {'user': 'test'} (glob)
   114f4176969ef342759a8a57e6bccefc4234829b 49d44ab2be1b67a79127568a67c9c99430633b48 0 (*) {'user': 'test'} (glob)
 
 With some node gone missing during the edit.
 
   $ echo "pick `hg log -r 0 -T '{node|short}'`" > plan
   $ echo "pick `hg log -r 6 -T '{node|short}'`" >> plan
   $ echo "edit `hg log -r 5 -T '{node|short}'`" >> plan
   $ hg histedit -r 'all()' --commands plan
   Editing (49d44ab2be1b), you may commit or record as needed now.
   (hg histedit --continue to resume)
   [1]
   $ hg st
   A b
   A d
   ? plan
   $ hg commit --amend -X . -m XXXXXX
   $ hg commit --amend -X . -m b2
   $ hg --hidden --config extensions.strip= strip 'desc(XXXXXX)' --no-backup
   $ hg histedit --continue
   $ hg log -G
   @  9:273c1f3b8626 c
   |
   o  8:aba7da937030 b2
   |
   o  0:cb9a9f314b8b a
   
   $ hg debugobsolete
   e72d22b19f8ecf4150ab4f91d0973fd9955d3ddf 49d44ab2be1b67a79127568a67c9c99430633b48 0 (*) {'user': 'test'} (glob)
   3e30a45cf2f719e96ab3922dfe039cfd047956ce 0 {e72d22b19f8ecf4150ab4f91d0973fd9955d3ddf} (*) {'user': 'test'} (glob)
   1b2d564fad96311b45362f17c2aa855150efb35f 46abc7c4d8738e8563e577f7889e1b6db3da4199 0 (*) {'user': 'test'} (glob)
   114f4176969ef342759a8a57e6bccefc4234829b 49d44ab2be1b67a79127568a67c9c99430633b48 0 (*) {'user': 'test'} (glob)
   76f72745eac0643d16530e56e2f86e36e40631f1 2ca853e48edbd6453a0674dc0fe28a0974c51b9c 0 (*) {'user': 'test'} (glob)
   2ca853e48edbd6453a0674dc0fe28a0974c51b9c aba7da93703075eec9fb1dbaf143ff2bc1c49d46 0 (*) {'user': 'test'} (glob)
   49d44ab2be1b67a79127568a67c9c99430633b48 273c1f3b86267ed3ec684bb13af1fa4d6ba56e02 0 (*) {'user': 'test'} (glob)
   46abc7c4d8738e8563e577f7889e1b6db3da4199 aba7da93703075eec9fb1dbaf143ff2bc1c49d46 0 (*) {'user': 'test'} (glob)
   $ cd ..
 
 Base setup for the rest of the testing
 ======================================
 
   $ hg init base
   $ cd base
 
   $ for x in a b c d e f ; do
   >     echo $x > $x
   >     hg add $x
   >     hg ci -m $x
   > done
 
   $ hg log --graph
   @  5:652413bf663e f
   |
   o  4:e860deea161a e
   |
   o  3:055a42cdd887 d
   |
   o  2:177f92b77385 c
   |
   o  1:d2ae7f538514 b
   |
   o  0:cb9a9f314b8b a
   
 
   $ HGEDITOR=cat hg histedit 1
   pick d2ae7f538514 1 b
   pick 177f92b77385 2 c
   pick 055a42cdd887 3 d
   pick e860deea161a 4 e
   pick 652413bf663e 5 f
   
   # Edit history between d2ae7f538514 and 652413bf663e
   #
   # Commits are listed from least to most recent
   #
   # You can reorder changesets by reordering the lines
   #
   # Commands:
   #
   #  e, edit = use commit, but stop for amending
   #  m, mess = edit commit message without changing commit content
   #  p, pick = use commit
   #  d, drop = remove commit from history
   #  f, fold = use commit, but combine it with the one above
-  #  r, roll = like fold, but discard this commit's description
+  #  r, roll = like fold, but discard this commit's description and date
   #
   $ hg histedit 1 --commands - --verbose <<EOF | grep histedit
   > pick 177f92b77385 2 c
   > drop d2ae7f538514 1 b
   > pick 055a42cdd887 3 d
   > fold e860deea161a 4 e
   > pick 652413bf663e 5 f
   > EOF
   [1]
   $ hg log --graph --hidden
   @  10:cacdfd884a93 f
   |
   o  9:59d9f330561f d
   |
   | x  8:b558abc46d09 fold-temp-revision e860deea161a
   | |
   | x  7:96e494a2d553 d
   |/
   o  6:b346ab9a313d c
   |
   | x  5:652413bf663e f
   | |
   | x  4:e860deea161a e
   | |
   | x  3:055a42cdd887 d
   | |
   | x  2:177f92b77385 c
   | |
   | x  1:d2ae7f538514 b
   |/
   o  0:cb9a9f314b8b a
   
   $ hg debugobsolete
   96e494a2d553dd05902ba1cee1d94d4cb7b8faed 0 {b346ab9a313db8537ecf96fca3ca3ca984ef3bd7} (*) {'user': 'test'} (glob)
   b558abc46d09c30f57ac31e85a8a3d64d2e906e4 0 {96e494a2d553dd05902ba1cee1d94d4cb7b8faed} (*) {'user': 'test'} (glob)
   d2ae7f538514cd87c17547b0de4cea71fe1af9fb 0 {cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b} (*) {'user': 'test'} (glob)
   177f92b773850b59254aa5e923436f921b55483b b346ab9a313db8537ecf96fca3ca3ca984ef3bd7 0 (*) {'user': 'test'} (glob)
   055a42cdd88768532f9cf79daa407fc8d138de9b 59d9f330561fd6c88b1a6b32f0e45034d88db784 0 (*) {'user': 'test'} (glob)
   e860deea161a2f77de56603b340ebbb4536308ae 59d9f330561fd6c88b1a6b32f0e45034d88db784 0 (*) {'user': 'test'} (glob)
   652413bf663ef2a641cab26574e46d5f5a64a55a cacdfd884a9321ec4e1de275ef3949fa953a1f83 0 (*) {'user': 'test'} (glob)
 
 
 Ensure hidden revision does not prevent histedit
 -------------------------------------------------
 
 create an hidden revision
 
   $ hg histedit 6 --commands - << EOF
   > pick b346ab9a313d 6 c
   > drop 59d9f330561f 7 d
   > pick cacdfd884a93 8 f
   > EOF
   $ hg log --graph
   @  11:c13eb81022ca f
   |
   o  6:b346ab9a313d c
   |
   o  0:cb9a9f314b8b a
   
 check hidden revision are ignored (6 have hidden children 7 and 8)
 
   $ hg histedit 6 --commands - << EOF
   > pick b346ab9a313d 6 c
   > pick c13eb81022ca 8 f
   > EOF
 
 
 
 Test that rewriting leaving instability behind is allowed
 ---------------------------------------------------------------------
 
   $ hg up '.^'
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ hg log -r 'children(.)'
   11:c13eb81022ca f (no-eol)
   $ hg histedit -r '.' --commands - <<EOF
   > edit b346ab9a313d 6 c
   > EOF
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   adding c
   Editing (b346ab9a313d), you may commit or record as needed now.
   (hg histedit --continue to resume)
   [1]
   $ echo c >> c
   $ hg histedit --continue
 
   $ hg log -r 'unstable()'
   11:c13eb81022ca f (no-eol)
 
 stabilise
 
   $ hg rebase  -r 'unstable()' -d .
   rebasing 11:c13eb81022ca "f"
   $ hg up tip -q
 
 Test dropping of changeset on the top of the stack
 -------------------------------------------------------
 
 Nothing is rewritten below, the working directory parent must be change for the
 dropped changeset to be hidden.
 
   $ cd ..
   $ hg clone base droplast
   updating to branch default
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd droplast
   $ hg histedit -r '40db8afa467b' --commands - << EOF
   > pick 40db8afa467b 10 c
   > drop b449568bf7fc 11 f
   > EOF
   $ hg log -G
   @  12:40db8afa467b c
   |
   o  0:cb9a9f314b8b a
   
 
 With rewritten ancestors
 
   $ echo e > e
   $ hg add e
   $ hg commit -m g
   $ echo f > f
   $ hg add f
   $ hg commit -m h
   $ hg histedit -r '40db8afa467b' --commands - << EOF
   > pick 47a8561c0449 12 g
   > pick 40db8afa467b 10 c
   > drop 1b3b05f35ff0 13 h
   > EOF
   $ hg log -G
   @  17:ee6544123ab8 c
   |
   o  16:269e713e9eae g
   |
   o  0:cb9a9f314b8b a
   
   $ cd ../base
 
 
 
 Test phases support
 ===========================================
 
 Check that histedit respect immutability
 -------------------------------------------
 
   $ cat >> $HGRCPATH << EOF
   > [ui]
   > logtemplate= {rev}:{node|short} ({phase}) {desc|firstline}\n
   > EOF
 
   $ hg ph -pv '.^'
   phase changed for 2 changesets
   $ hg log -G
   @  13:b449568bf7fc (draft) f
   |
   o  12:40db8afa467b (public) c
   |
   o  0:cb9a9f314b8b (public) a
   
   $ hg histedit -r '.~2'
   abort: cannot edit public changeset: cb9a9f314b8b
   (see 'hg help phases' for details)
   [255]
 
 
 Prepare further testing
 -------------------------------------------
 
   $ for x in g h i j k ; do
   >     echo $x > $x
   >     hg add $x
   >     hg ci -m $x
   > done
   $ hg phase --force --secret .~2
   $ hg log -G
   @  18:ee118ab9fa44 (secret) k
   |
   o  17:3a6c53ee7f3d (secret) j
   |
   o  16:b605fb7503f2 (secret) i
   |
   o  15:7395e1ff83bd (draft) h
   |
   o  14:6b70183d2492 (draft) g
   |
   o  13:b449568bf7fc (draft) f
   |
   o  12:40db8afa467b (public) c
   |
   o  0:cb9a9f314b8b (public) a
   
   $ cd ..
 
 simple phase conservation
 -------------------------------------------
 
 Resulting changeset should conserve the phase of the original one whatever the
 phases.new-commit option is.
 
 New-commit as draft (default)
 
   $ cp -R base simple-draft
   $ cd simple-draft
   $ hg histedit -r 'b449568bf7fc' --commands - << EOF
   > edit b449568bf7fc 11 f
   > pick 6b70183d2492 12 g
   > pick 7395e1ff83bd 13 h
   > pick b605fb7503f2 14 i
   > pick 3a6c53ee7f3d 15 j
   > pick ee118ab9fa44 16 k
   > EOF
   0 files updated, 0 files merged, 6 files removed, 0 files unresolved
   adding f
   Editing (b449568bf7fc), you may commit or record as needed now.
   (hg histedit --continue to resume)
   [1]
   $ echo f >> f
   $ hg histedit --continue
   $ hg log -G
   @  24:12e89af74238 (secret) k
   |
   o  23:636a8687b22e (secret) j
   |
   o  22:ccaf0a38653f (secret) i
   |
   o  21:11a89d1c2613 (draft) h
   |
   o  20:c1dec7ca82ea (draft) g
   |
   o  19:087281e68428 (draft) f
   |
   o  12:40db8afa467b (public) c
   |
   o  0:cb9a9f314b8b (public) a
   
   $ cd ..
 
 
 New-commit as secret (config)
 
   $ cp -R base simple-secret
   $ cd simple-secret
   $ cat >> .hg/hgrc << EOF
   > [phases]
   > new-commit=secret
   > EOF
   $ hg histedit -r 'b449568bf7fc' --commands - << EOF
   > edit b449568bf7fc 11 f
   > pick 6b70183d2492 12 g
   > pick 7395e1ff83bd 13 h
   > pick b605fb7503f2 14 i
   > pick 3a6c53ee7f3d 15 j
   > pick ee118ab9fa44 16 k
   > EOF
   0 files updated, 0 files merged, 6 files removed, 0 files unresolved
   adding f
   Editing (b449568bf7fc), you may commit or record as needed now.
   (hg histedit --continue to resume)
   [1]
   $ echo f >> f
   $ hg histedit --continue
   $ hg log -G
   @  24:12e89af74238 (secret) k
   |
   o  23:636a8687b22e (secret) j
   |
   o  22:ccaf0a38653f (secret) i
   |
   o  21:11a89d1c2613 (draft) h
   |
   o  20:c1dec7ca82ea (draft) g
   |
   o  19:087281e68428 (draft) f
   |
   o  12:40db8afa467b (public) c
   |
   o  0:cb9a9f314b8b (public) a
   
   $ cd ..
 
 
 Changeset reordering
 -------------------------------------------
 
 If a secret changeset is put before a draft one, all descendant should be secret.
 It seems more important to present the secret phase.
 
   $ cp -R base reorder
   $ cd reorder
   $ hg histedit -r 'b449568bf7fc' --commands - << EOF
   > pick b449568bf7fc 11 f
   > pick 3a6c53ee7f3d 15 j
   > pick 6b70183d2492 12 g
   > pick b605fb7503f2 14 i
   > pick 7395e1ff83bd 13 h
   > pick ee118ab9fa44 16 k
   > EOF
   $ hg log -G
   @  23:558246857888 (secret) k
   |
   o  22:28bd44768535 (secret) h
   |
   o  21:d5395202aeb9 (secret) i
   |
   o  20:21edda8e341b (secret) g
   |
   o  19:5ab64f3a4832 (secret) j
   |
   o  13:b449568bf7fc (draft) f
   |
   o  12:40db8afa467b (public) c
   |
   o  0:cb9a9f314b8b (public) a
   
   $ cd ..
 
 Changeset folding
 -------------------------------------------
 
 Folding a secret changeset with a draft one turn the result secret (again,
 better safe than sorry). Folding between same phase changeset still works
 
 Note that there is a few reordering in this series for more extensive test
 
   $ cp -R base folding
   $ cd folding
   $ cat >> .hg/hgrc << EOF
   > [phases]
   > new-commit=secret
   > EOF
   $ hg histedit -r 'b449568bf7fc' --commands - << EOF
   > pick 7395e1ff83bd 13 h
   > fold b449568bf7fc 11 f
   > pick 6b70183d2492 12 g
   > fold 3a6c53ee7f3d 15 j
   > pick b605fb7503f2 14 i
   > fold ee118ab9fa44 16 k
   > EOF
   $ hg log -G
   @  27:f9daec13fb98 (secret) i
   |
   o  24:49807617f46a (secret) g
   |
   o  21:050280826e04 (draft) h
   |
   o  12:40db8afa467b (public) c
   |
   o  0:cb9a9f314b8b (public) a
   
   $ hg co 49807617f46a
   0 files updated, 0 files merged, 2 files removed, 0 files unresolved
   $ echo wat >> wat
   $ hg add wat
   $ hg ci -m 'add wat'
   created new head
   $ hg merge f9daec13fb98
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ hg ci -m 'merge'
   $ echo not wat > wat
   $ hg ci -m 'modify wat'
   $ hg histedit 050280826e04
   abort: cannot edit history that contains merges
   [255]
   $ cd ..

tests/test-histedit-outgoing.t

@@ -1,153 +1,153
   $ cat >> $HGRCPATH <<EOF
   > [extensions]
   > histedit=
   > EOF
 
   $ initrepos ()
   > {
   >     hg init r
   >     cd r
   >     for x in a b c ; do
   >         echo $x > $x
   >         hg add $x
   >         hg ci -m $x
   >     done
   >     cd ..
   >     hg clone r r2 | grep -v updating
   >     cd r2
   >     for x in d e f ; do
   >         echo $x > $x
   >         hg add $x
   >         hg ci -m $x
   >     done
   >     cd ..
   >     hg init r3
   >     cd r3
   >     for x in g h i ; do
   >         echo $x > $x
   >         hg add $x
   >         hg ci -m $x
   >     done
   >     cd ..
   > }
 
   $ initrepos
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 show the edit commands offered by outgoing
   $ cd r2
   $ HGEDITOR=cat hg histedit --outgoing ../r | grep -v comparing | grep -v searching
   pick 055a42cdd887 3 d
   pick e860deea161a 4 e
   pick 652413bf663e 5 f
   
   # Edit history between 055a42cdd887 and 652413bf663e
   #
   # Commits are listed from least to most recent
   #
   # You can reorder changesets by reordering the lines
   #
   # Commands:
   #
   #  e, edit = use commit, but stop for amending
   #  m, mess = edit commit message without changing commit content
   #  p, pick = use commit
   #  d, drop = remove commit from history
   #  f, fold = use commit, but combine it with the one above
-  #  r, roll = like fold, but discard this commit's description
+  #  r, roll = like fold, but discard this commit's description and date
   #
   $ cd ..
 
 show the error from unrelated repos
   $ cd r3
   $ HGEDITOR=cat hg histedit --outgoing ../r | grep -v comparing | grep -v searching
   abort: repository is unrelated
   [1]
   $ cd ..
 
 show the error from unrelated repos
   $ cd r3
   $ HGEDITOR=cat hg histedit --force --outgoing ../r
   comparing with ../r
   searching for changes
   warning: repository is unrelated
   pick 2a4042b45417 0 g
   pick 68c46b4927ce 1 h
   pick 51281e65ba79 2 i
   
   # Edit history between 2a4042b45417 and 51281e65ba79
   #
   # Commits are listed from least to most recent
   #
   # You can reorder changesets by reordering the lines
   #
   # Commands:
   #
   #  e, edit = use commit, but stop for amending
   #  m, mess = edit commit message without changing commit content
   #  p, pick = use commit
   #  d, drop = remove commit from history
   #  f, fold = use commit, but combine it with the one above
-  #  r, roll = like fold, but discard this commit's description
+  #  r, roll = like fold, but discard this commit's description and date
   #
   $ cd ..
 
 test sensitivity to branch in URL:
 
   $ cd r2
   $ hg -q update 2
   $ hg -q branch foo
   $ hg commit -m 'create foo branch'
   $ HGEDITOR=cat hg histedit --outgoing '../r#foo' | grep -v comparing | grep -v searching
   pick f26599ee3441 6 create foo branch
   
   # Edit history between f26599ee3441 and f26599ee3441
   #
   # Commits are listed from least to most recent
   #
   # You can reorder changesets by reordering the lines
   #
   # Commands:
   #
   #  e, edit = use commit, but stop for amending
   #  m, mess = edit commit message without changing commit content
   #  p, pick = use commit
   #  d, drop = remove commit from history
   #  f, fold = use commit, but combine it with the one above
-  #  r, roll = like fold, but discard this commit's description
+  #  r, roll = like fold, but discard this commit's description and date
   #
 
 test to check number of roots in outgoing revisions
 
   $ hg -q outgoing -G --template '{node|short}({branch})' '../r'
   @  f26599ee3441(foo)
   
   o  652413bf663e(default)
   |
   o  e860deea161a(default)
   |
   o  055a42cdd887(default)
   
   $ HGEDITOR=cat hg -q histedit --outgoing '../r'
   abort: there are ambiguous outgoing revisions
   (see 'hg help histedit' for more detail)
   [255]
 
   $ hg -q update -C 2
   $ echo aa >> a
   $ hg -q commit -m 'another head on default'
   $ hg -q outgoing -G --template '{node|short}({branch})' '../r#default'
   @  3879dc049647(default)
   
   o  652413bf663e(default)
   |
   o  e860deea161a(default)
   |
   o  055a42cdd887(default)
   
   $ HGEDITOR=cat hg -q histedit --outgoing '../r#default'
   abort: there are ambiguous outgoing revisions
   (see 'hg help histedit' for more detail)
   [255]
 
   $ cd ..