merged with crew

hgext/acl.py

@@ -1,99 +1,107 b''
 # acl.py - changeset access control for mercurial
 #
 # Copyright 2006 Vadim Gelfer <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 #
 
-'''provide simple hooks for access control
+'''control access to a repository using simple hooks
 
-Authorization is against local user name on system where hook is run, not
-committer of original changeset (since that is easy to spoof).
+This hook makes it possible to allow or deny write access to portions
+of a repository when receiving incoming changesets.
+
+The authorization is matched based on the local user name on the
+system where the hook runs, and not the committer of the original
+changeset (since the latter is merely informative).
 
-The acl hook is best to use if you use hgsh to set up restricted shells for
-authenticated users to only push to / pull from. It's not safe if user has
-interactive shell access, because they can disable the hook. It's also not
-safe if remote users share one local account, because then there's no way to
-tell remote users apart.
+The acl hook is best used along with a restricted shell like hgsh,
+preventing authenticating users from doing anything other than
+pushing or pulling. The hook is not safe to use if users have
+interactive shell access, as they can then disable the hook.
+Nor is it safe if remote users share an account, because then there
+is no way to distinguish them.
 
-To use, configure the acl extension in hgrc like this:
+To use this hook, configure the acl extension in your hgrc like this:
 
   [extensions]
   hgext.acl =
 
   [hooks]
   pretxnchangegroup.acl = python:hgext.acl.hook
 
   [acl]
-  sources = serve        # check if source of incoming changes in this list
-                         # ("serve" == ssh or http, "push", "pull", "bundle")
+  # Check whether the source of incoming changes is in this list
+  # ("serve" == ssh or http, "push", "pull", "bundle")
+  sources = serve
 
-Allow and deny lists have a subtree pattern (default syntax is glob) on the
-left and user names on right. The deny list is checked before the allow list.
+The allow and deny sections take a subtree pattern as key (with a
+glob syntax by default), and a comma separated list of users as
+the corresponding value. The deny list is checked before the allow
+list is.
 
   [acl.allow]
-  # if acl.allow not present, all users allowed by default
-  # empty acl.allow = no users allowed
+  # If acl.allow is not present, all users are allowed by default.
+  # An empty acl.allow section means no users allowed.
   docs/** = doc_writer
   .hgtags = release_engineer
 
   [acl.deny]
-  # if acl.deny not present, no users denied by default
-  # empty acl.deny = all users allowed
+  # If acl.deny is not present, no users are refused by default.
+  # An empty acl.deny section means all users allowed.
   glob pattern = user4, user5
    ** = user6
 '''
 
 from mercurial.i18n import _
 from mercurial import util, match
 import getpass, urllib
 
 def buildmatch(ui, repo, user, key):
     '''return tuple of (match function, list enabled).'''
     if not ui.has_section(key):
         ui.debug(_('acl: %s not enabled\n') % key)
         return None
 
     pats = [pat for pat, users in ui.configitems(key)
             if user in users.replace(',', ' ').split()]
     ui.debug(_('acl: %s enabled, %d entries for user %s\n') %
              (key, len(pats), user))
     if pats:
         return match.match(repo.root, '', pats)
     return match.exact(repo.root, '', [])
 
 
 def hook(ui, repo, hooktype, node=None, source=None, **kwargs):
     if hooktype != 'pretxnchangegroup':
         raise util.Abort(_('config error - hook type "%s" cannot stop '
                            'incoming changesets') % hooktype)
     if source not in ui.config('acl', 'sources', 'serve').split():
         ui.debug(_('acl: changes have source "%s" - skipping\n') % source)
         return
 
     user = None
     if source == 'serve' and 'url' in kwargs:
         url = kwargs['url'].split(':')
         if url[0] == 'remote' and url[1].startswith('http'):
             user = urllib.unquote(url[2])
 
     if user is None:
         user = getpass.getuser()
 
     cfg = ui.config('acl', 'config')
     if cfg:
         ui.readconfig(cfg, sections = ['acl.allow', 'acl.deny'])
     allow = buildmatch(ui, repo, user, 'acl.allow')
     deny = buildmatch(ui, repo, user, 'acl.deny')
 
     for rev in xrange(repo[node], len(repo)):
         ctx = repo[rev]
         for f in ctx.files():
             if deny and deny(f):
                 ui.debug(_('acl: user %s denied on %s\n') % (user, f))
                 raise util.Abort(_('acl: access denied for changeset %s') % ctx)
             if allow and not allow(f):
                 ui.debug(_('acl: user %s not allowed on %s\n') % (user, f))
                 raise util.Abort(_('acl: access denied for changeset %s') % ctx)
         ui.debug(_('acl: allowing changeset %s\n') % ctx)

hgext/bookmarks.py

@@ -1,334 +1,336 b''
 # Mercurial extension to provide the 'hg bookmark' command
 #
 # Copyright 2008 David Soria Parra <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''Mercurial bookmarks
+'''track a line of development with movable markers
 
-Mercurial bookmarks are local moveable pointers to changesets. Every
-bookmark points to a changeset identified by its hash. If you commit a
-changeset that is based on a changeset that has a bookmark on it, the
-bookmark is forwarded to the new changeset.
+Bookmarks are local movable markers to changesets. Every bookmark
+points to a changeset identified by its hash. If you commit a
+changeset that is based on a changeset that has a bookmark on it,
+the bookmark shifts to the new changeset.
+
+It is possible to use bookmark names in every revision lookup
+(e.g. hg merge, hg update).
 
-It is possible to use bookmark names in every revision lookup (e.g. hg
-merge, hg update).
-
-The bookmark extension offers the possiblity to have a more git-like
-experience by adding the following configuration option to your .hgrc:
+By default, when several bookmarks point to the same changeset, they
+will all move forward together. It is possible to obtain a more
+git-like experience by adding the following configuration option to
+your .hgrc:
 
-[bookmarks]
-track.current = True
+  [bookmarks]
+  track.current = True
 
-This will cause bookmarks to track the bookmark that you are currently
-on, and just updates it. This is similar to git's approach to
+This will cause Mercurial to track the bookmark that you are currently
+using, and only update it. This is similar to git's approach to
 branching.
 '''
 
 from mercurial.i18n import _
 from mercurial.node import nullid, nullrev, hex, short
 from mercurial import util, commands, localrepo, repair, extensions
 import os
 
 def parse(repo):
     '''Parse .hg/bookmarks file and return a dictionary
 
     Bookmarks are stored as {HASH}\\s{NAME}\\n (localtags format) values
     in the .hg/bookmarks file. They are read by the parse() method and
     returned as a dictionary with name => hash values.
 
     The parsed dictionary is cached until a write() operation is done.
     '''
     try:
         if repo._bookmarks:
             return repo._bookmarks
         repo._bookmarks = {}
         for line in repo.opener('bookmarks'):
             sha, refspec = line.strip().split(' ', 1)
             repo._bookmarks[refspec] = repo.lookup(sha)
     except:
         pass
     return repo._bookmarks
 
 def write(repo, refs):
     '''Write bookmarks
 
     Write the given bookmark => hash dictionary to the .hg/bookmarks file
     in a format equal to those of localtags.
 
     We also store a backup of the previous state in undo.bookmarks that
     can be copied back on rollback.
     '''
     if os.path.exists(repo.join('bookmarks')):
         util.copyfile(repo.join('bookmarks'), repo.join('undo.bookmarks'))
     if current(repo) not in refs:
         setcurrent(repo, None)
     wlock = repo.wlock()
     try:
         file = repo.opener('bookmarks', 'w', atomictemp=True)
         for refspec, node in refs.iteritems():
             file.write("%s %s\n" % (hex(node), refspec))
         file.rename()
     finally:
         wlock.release()
 
 def current(repo):
     '''Get the current bookmark
 
     If we use gittishsh branches we have a current bookmark that
     we are on. This function returns the name of the bookmark. It
     is stored in .hg/bookmarks.current
     '''
     if repo._bookmarkcurrent:
         return repo._bookmarkcurrent
     mark = None
     if os.path.exists(repo.join('bookmarks.current')):
         file = repo.opener('bookmarks.current')
         # No readline() in posixfile_nt, reading everything is cheap
         mark = (file.readlines() or [''])[0]
         if mark == '':
             mark = None
         file.close()
     repo._bookmarkcurrent = mark
     return mark
 
 def setcurrent(repo, mark):
     '''Set the name of the bookmark that we are currently on
 
     Set the name of the bookmark that we are on (hg update <bookmark>).
     The name is recorded in .hg/bookmarks.current
     '''
     if current(repo) == mark:
         return
 
     refs = parse(repo)
 
     # do not update if we do update to a rev equal to the current bookmark
     if (mark and mark not in refs and
         current(repo) and refs[current(repo)] == repo.changectx('.').node()):
         return
     if mark not in refs:
         mark = ''
     wlock = repo.wlock()
     try:
         file = repo.opener('bookmarks.current', 'w', atomictemp=True)
         file.write(mark)
         file.rename()
     finally:
         wlock.release()
     repo._bookmarkcurrent = mark
 
 def bookmark(ui, repo, mark=None, rev=None, force=False, delete=False, rename=None):
-    '''Mercurial bookmarks
+    '''track a line of development with movable markers
 
     Bookmarks are pointers to certain commits that move when
-    commiting. Bookmarks are local. They can be renamed, copied and
+    committing. Bookmarks are local. They can be renamed, copied and
     deleted. It is possible to use bookmark names in 'hg merge' and
     'hg update' to merge and update respectively to a given bookmark.
 
     You can use 'hg bookmark NAME' to set a bookmark on the working
     directory's parent revision with the given name. If you specify
     a revision using -r REV (where REV may be an existing bookmark),
     the bookmark is assigned to that revision.
     '''
     hexfn = ui.debugflag and hex or short
     marks = parse(repo)
     cur   = repo.changectx('.').node()
 
     if rename:
         if rename not in marks:
             raise util.Abort(_("a bookmark of this name does not exist"))
         if mark in marks and not force:
             raise util.Abort(_("a bookmark of the same name already exists"))
         if mark is None:
             raise util.Abort(_("new bookmark name required"))
         marks[mark] = marks[rename]
         del marks[rename]
         if current(repo) == rename:
             setcurrent(repo, mark)
         write(repo, marks)
         return
 
     if delete:
         if mark is None:
             raise util.Abort(_("bookmark name required"))
         if mark not in marks:
             raise util.Abort(_("a bookmark of this name does not exist"))
         if mark == current(repo):
             setcurrent(repo, None)
         del marks[mark]
         write(repo, marks)
         return
 
     if mark != None:
         if "\n" in mark:
             raise util.Abort(_("bookmark name cannot contain newlines"))
         mark = mark.strip()
         if mark in marks and not force:
             raise util.Abort(_("a bookmark of the same name already exists"))
         if ((mark in repo.branchtags() or mark == repo.dirstate.branch())
             and not force):
             raise util.Abort(
                 _("a bookmark cannot have the name of an existing branch"))
         if rev:
             marks[mark] = repo.lookup(rev)
         else:
             marks[mark] = repo.changectx('.').node()
             setcurrent(repo, mark)
         write(repo, marks)
         return
 
     if mark is None:
         if rev:
             raise util.Abort(_("bookmark name required"))
         if len(marks) == 0:
             ui.status("no bookmarks set\n")
         else:
             for bmark, n in marks.iteritems():
                 if ui.configbool('bookmarks', 'track.current'):
                     prefix = (bmark == current(repo) and n == cur) and '*' or ' '
                 else:
                     prefix = (n == cur) and '*' or ' '
 
                 ui.write(" %s %-25s %d:%s\n" % (
                     prefix, bmark, repo.changelog.rev(n), hexfn(n)))
         return
 
 def _revstostrip(changelog, node):
     srev = changelog.rev(node)
     tostrip = [srev]
     saveheads = []
     for r in xrange(srev, len(changelog)):
         parents = changelog.parentrevs(r)
         if parents[0] in tostrip or parents[1] in tostrip:
             tostrip.append(r)
             if parents[1] != nullrev:
                 for p in parents:
                     if p not in tostrip and p > srev:
                         saveheads.append(p)
     return [r for r in tostrip if r not in saveheads]
 
 def strip(oldstrip, ui, repo, node, backup="all"):
     """Strip bookmarks if revisions are stripped using
     the mercurial.strip method. This usually happens during
     qpush and qpop"""
     revisions = _revstostrip(repo.changelog, node)
     marks = parse(repo)
     update = []
     for mark, n in marks.iteritems():
         if repo.changelog.rev(n) in revisions:
             update.append(mark)
     oldstrip(ui, repo, node, backup)
     if len(update) > 0:
         for m in update:
             marks[m] = repo.changectx('.').node()
         write(repo, marks)
 
 def reposetup(ui, repo):
     if not isinstance(repo, localrepo.localrepository):
         return
 
     # init a bookmark cache as otherwise we would get a infinite reading
     # in lookup()
     repo._bookmarks = None
     repo._bookmarkcurrent = None
 
     class bookmark_repo(repo.__class__):
         def rollback(self):
             if os.path.exists(self.join('undo.bookmarks')):
                 util.rename(self.join('undo.bookmarks'), self.join('bookmarks'))
             return super(bookmark_repo, self).rollback()
 
         def lookup(self, key):
             if self._bookmarks is None:
                 self._bookmarks = parse(self)
             if key in self._bookmarks:
                 key = self._bookmarks[key]
             return super(bookmark_repo, self).lookup(key)
 
         def commit(self, *k, **kw):
             """Add a revision to the repository and
             move the bookmark"""
             wlock = self.wlock() # do both commit and bookmark with lock held
             try:
                 node  = super(bookmark_repo, self).commit(*k, **kw)
                 if node is None:
                     return None
                 parents = repo.changelog.parents(node)
                 if parents[1] == nullid:
                     parents = (parents[0],)
                 marks = parse(repo)
                 update = False
                 for mark, n in marks.items():
                     if ui.configbool('bookmarks', 'track.current'):
                         if mark == current(repo) and n in parents:
                             marks[mark] = node
                             update = True
                     else:
                         if n in parents:
                             marks[mark] = node
                             update = True
                 if update:
                     write(repo, marks)
                 return node
             finally:
                 wlock.release()
 
         def addchangegroup(self, source, srctype, url, emptyok=False):
             parents = repo.dirstate.parents()
 
             result = super(bookmark_repo, self).addchangegroup(
                 source, srctype, url, emptyok)
             if result > 1:
                 # We have more heads than before
                 return result
             node = repo.changelog.tip()
             marks = parse(repo)
             update = False
             for mark, n in marks.items():
                 if n in parents:
                     marks[mark] = node
                     update = True
             if update:
                 write(repo, marks)
             return result
 
         def tags(self):
             """Merge bookmarks with normal tags"""
             if self.tagscache:
                 return self.tagscache
 
             tagscache = super(bookmark_repo, self).tags()
             tagscache.update(parse(repo))
             return tagscache
 
     repo.__class__ = bookmark_repo
 
 def uisetup(ui):
     extensions.wrapfunction(repair, "strip", strip)
     if ui.configbool('bookmarks', 'track.current'):
         extensions.wrapcommand(commands.table, 'update', updatecurbookmark)
 
 def updatecurbookmark(orig, ui, repo, *args, **opts):
     '''Set the current bookmark
 
     If the user updates to a bookmark we update the .hg/bookmarks.current
     file.
     '''
     res = orig(ui, repo, *args, **opts)
     rev = opts['rev']
     if not rev and len(args) > 0:
         rev = args[0]
     setcurrent(repo, rev)
     return res
 
 cmdtable = {
     "bookmarks":
         (bookmark,
          [('f', 'force', False, _('force')),
           ('r', 'rev', '', _('revision')),
           ('d', 'delete', False, _('delete a given bookmark')),
           ('m', 'rename', '', _('rename a given bookmark'))],
          _('hg bookmarks [-f] [-d] [-m NAME] [-r REV] [NAME]')),
 }

hgext/bugzilla.py

@@ -1,416 +1,416 b''
 # bugzilla.py - bugzilla integration for mercurial
 #
 # Copyright 2006 Vadim Gelfer <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''Bugzilla integration
+'''integrate Mercurial with a Bugzilla bug tracker
 
 This hook extension adds comments on bugs in Bugzilla when changesets
 that refer to bugs by Bugzilla ID are seen. The hook does not change
 bug status.
 
 The hook updates the Bugzilla database directly. Only Bugzilla
 installations using MySQL are supported.
 
 The hook relies on a Bugzilla script to send bug change notification
 emails. That script changes between Bugzilla versions; the
 'processmail' script used prior to 2.18 is replaced in 2.18 and
 subsequent versions by 'config/sendbugmail.pl'. Note that these will
 be run by Mercurial as the user pushing the change; you will need to
 ensure the Bugzilla install file permissions are set appropriately.
 
 Configuring the extension:
 
     [bugzilla]
 
     host       Hostname of the MySQL server holding the Bugzilla
                database.
     db         Name of the Bugzilla database in MySQL. Default 'bugs'.
     user       Username to use to access MySQL server. Default 'bugs'.
     password   Password to use to access MySQL server.
     timeout    Database connection timeout (seconds). Default 5.
     version    Bugzilla version. Specify '3.0' for Bugzilla versions
                3.0 and later, '2.18' for Bugzilla versions from 2.18
                and '2.16' for versions prior to 2.18.
     bzuser     Fallback Bugzilla user name to record comments with, if
                changeset committer cannot be found as a Bugzilla user.
     bzdir      Bugzilla install directory. Used by default notify.
                Default '/var/www/html/bugzilla'.
     notify     The command to run to get Bugzilla to send bug change
                notification emails. Substitutes from a map with 3
                keys, 'bzdir', 'id' (bug id) and 'user' (committer
                bugzilla email). Default depends on version; from 2.18
                it is "cd %(bzdir)s && perl -T contrib/sendbugmail.pl
                %(id)s %(user)s".
     regexp     Regular expression to match bug IDs in changeset commit
                message. Must contain one "()" group. The default
                expression matches 'Bug 1234', 'Bug no. 1234', 'Bug
                number 1234', 'Bugs 1234,5678', 'Bug 1234 and 5678' and
                variations thereof. Matching is case insensitive.
     style      The style file to use when formatting comments.
     template   Template to use when formatting comments. Overrides
                style if specified. In addition to the usual Mercurial
                keywords, the extension specifies:
                    {bug}       The Bugzilla bug ID.
                    {root}      The full pathname of the Mercurial
                                repository.
                    {webroot}   Stripped pathname of the Mercurial
                                repository.
                    {hgweb}     Base URL for browsing Mercurial
                                repositories.
                Default 'changeset {node|short} in repo {root} refers '
                        'to bug {bug}.\\ndetails:\\n\\t{desc|tabindent}'
     strip      The number of slashes to strip from the front of {root}
                to produce {webroot}. Default 0.
     usermap    Path of file containing Mercurial committer ID to
                Bugzilla user ID mappings. If specified, the file
                should contain one mapping per line,
                "committer"="Bugzilla user". See also the [usermap]
                section.
 
     [usermap]
     Any entries in this section specify mappings of Mercurial
     committer ID to Bugzilla user ID. See also [bugzilla].usermap.
     "committer"="Bugzilla user"
 
     [web]
     baseurl    Base URL for browsing Mercurial repositories. Reference
                from templates as {hgweb}.
 
 Activating the extension:
 
     [extensions]
     hgext.bugzilla =
 
     [hooks]
     # run bugzilla hook on every change pulled or pushed in here
     incoming.bugzilla = python:hgext.bugzilla.hook
 
 Example configuration:
 
 This example configuration is for a collection of Mercurial
 repositories in /var/local/hg/repos/ used with a local Bugzilla 3.2
 installation in /opt/bugzilla-3.2.
 
     [bugzilla]
     host=localhost
     password=XYZZY
     version=3.0
     bzuser=[e-mail]
     bzdir=/opt/bugzilla-3.2
     template=Changeset {node|short} in {root|basename}.\\n{hgweb}/{webroot}/rev/{node|short}\\n\\n{desc}\\n
     strip=5
 
     [web]
     baseurl=http://dev.domain.com/hg
 
     [usermap]
     [e-mail]=[e-mail]
 
 Commits add a comment to the Bugzilla bug record of the form:
 
     Changeset 3b16791d6642 in repository-name.
     http://dev.domain.com/hg/repository-name/rev/3b16791d6642
 
     Changeset commit comment. Bug 1234.
 '''
 
 from mercurial.i18n import _
 from mercurial.node import short
 from mercurial import cmdutil, templater, util
 import re, time
 
 MySQLdb = None
 
 def buglist(ids):
     return '(' + ','.join(map(str, ids)) + ')'
 
 class bugzilla_2_16(object):
     '''support for bugzilla version 2.16.'''
 
     def __init__(self, ui):
         self.ui = ui
         host = self.ui.config('bugzilla', 'host', 'localhost')
         user = self.ui.config('bugzilla', 'user', 'bugs')
         passwd = self.ui.config('bugzilla', 'password')
         db = self.ui.config('bugzilla', 'db', 'bugs')
         timeout = int(self.ui.config('bugzilla', 'timeout', 5))
         usermap = self.ui.config('bugzilla', 'usermap')
         if usermap:
             self.ui.readconfig(usermap, sections=['usermap'])
         self.ui.note(_('connecting to %s:%s as %s, password %s\n') %
                      (host, db, user, '*' * len(passwd)))
         self.conn = MySQLdb.connect(host=host, user=user, passwd=passwd,
                                     db=db, connect_timeout=timeout)
         self.cursor = self.conn.cursor()
         self.longdesc_id = self.get_longdesc_id()
         self.user_ids = {}
         self.default_notify = "cd %(bzdir)s && ./processmail %(id)s %(user)s"
 
     def run(self, *args, **kwargs):
         '''run a query.'''
         self.ui.note(_('query: %s %s\n') % (args, kwargs))
         try:
             self.cursor.execute(*args, **kwargs)
         except MySQLdb.MySQLError:
             self.ui.note(_('failed query: %s %s\n') % (args, kwargs))
             raise
 
     def get_longdesc_id(self):
         '''get identity of longdesc field'''
         self.run('select fieldid from fielddefs where name = "longdesc"')
         ids = self.cursor.fetchall()
         if len(ids) != 1:
             raise util.Abort(_('unknown database schema'))
         return ids[0][0]
 
     def filter_real_bug_ids(self, ids):
         '''filter not-existing bug ids from list.'''
         self.run('select bug_id from bugs where bug_id in %s' % buglist(ids))
         return sorted([c[0] for c in self.cursor.fetchall()])
 
     def filter_unknown_bug_ids(self, node, ids):
         '''filter bug ids from list that already refer to this changeset.'''
 
         self.run('''select bug_id from longdescs where
                     bug_id in %s and thetext like "%%%s%%"''' %
                  (buglist(ids), short(node)))
         unknown = set(ids)
         for (id,) in self.cursor.fetchall():
             self.ui.status(_('bug %d already knows about changeset %s\n') %
                            (id, short(node)))
             unknown.discard(id)
         return sorted(unknown)
 
     def notify(self, ids, committer):
         '''tell bugzilla to send mail.'''
 
         self.ui.status(_('telling bugzilla to send mail:\n'))
         (user, userid) = self.get_bugzilla_user(committer)
         for id in ids:
             self.ui.status(_('  bug %s\n') % id)
             cmdfmt = self.ui.config('bugzilla', 'notify', self.default_notify)
             bzdir = self.ui.config('bugzilla', 'bzdir', '/var/www/html/bugzilla')
             try:
                 # Backwards-compatible with old notify string, which
                 # took one string. This will throw with a new format
                 # string.
                 cmd = cmdfmt % id
             except TypeError:
                 cmd = cmdfmt % {'bzdir': bzdir, 'id': id, 'user': user}
             self.ui.note(_('running notify command %s\n') % cmd)
             fp = util.popen('(%s) 2>&1' % cmd)
             out = fp.read()
             ret = fp.close()
             if ret:
                 self.ui.warn(out)
                 raise util.Abort(_('bugzilla notify command %s') %
                                  util.explain_exit(ret)[0])
         self.ui.status(_('done\n'))
 
     def get_user_id(self, user):
         '''look up numeric bugzilla user id.'''
         try:
             return self.user_ids[user]
         except KeyError:
             try:
                 userid = int(user)
             except ValueError:
                 self.ui.note(_('looking up user %s\n') % user)
                 self.run('''select userid from profiles
                             where login_name like %s''', user)
                 all = self.cursor.fetchall()
                 if len(all) != 1:
                     raise KeyError(user)
                 userid = int(all[0][0])
             self.user_ids[user] = userid
             return userid
 
     def map_committer(self, user):
         '''map name of committer to bugzilla user name.'''
         for committer, bzuser in self.ui.configitems('usermap'):
             if committer.lower() == user.lower():
                 return bzuser
         return user
 
     def get_bugzilla_user(self, committer):
         '''see if committer is a registered bugzilla user. Return
         bugzilla username and userid if so. If not, return default
         bugzilla username and userid.'''
         user = self.map_committer(committer)
         try:
             userid = self.get_user_id(user)
         except KeyError:
             try:
                 defaultuser = self.ui.config('bugzilla', 'bzuser')
                 if not defaultuser:
                     raise util.Abort(_('cannot find bugzilla user id for %s') %
                                      user)
                 userid = self.get_user_id(defaultuser)
                 user = defaultuser
             except KeyError:
                 raise util.Abort(_('cannot find bugzilla user id for %s or %s') %
                                  (user, defaultuser))
         return (user, userid)
 
     def add_comment(self, bugid, text, committer):
         '''add comment to bug. try adding comment as committer of
         changeset, otherwise as default bugzilla user.'''
         (user, userid) = self.get_bugzilla_user(committer)
         now = time.strftime('%Y-%m-%d %H:%M:%S')
         self.run('''insert into longdescs
                     (bug_id, who, bug_when, thetext)
                     values (%s, %s, %s, %s)''',
                  (bugid, userid, now, text))
         self.run('''insert into bugs_activity (bug_id, who, bug_when, fieldid)
                     values (%s, %s, %s, %s)''',
                  (bugid, userid, now, self.longdesc_id))
         self.conn.commit()
 
 class bugzilla_2_18(bugzilla_2_16):
     '''support for bugzilla 2.18 series.'''
 
     def __init__(self, ui):
         bugzilla_2_16.__init__(self, ui)
         self.default_notify = "cd %(bzdir)s && perl -T contrib/sendbugmail.pl %(id)s %(user)s"
 
 class bugzilla_3_0(bugzilla_2_18):
     '''support for bugzilla 3.0 series.'''
 
     def __init__(self, ui):
         bugzilla_2_18.__init__(self, ui)
 
     def get_longdesc_id(self):
         '''get identity of longdesc field'''
         self.run('select id from fielddefs where name = "longdesc"')
         ids = self.cursor.fetchall()
         if len(ids) != 1:
             raise util.Abort(_('unknown database schema'))
         return ids[0][0]
 
 class bugzilla(object):
     # supported versions of bugzilla. different versions have
     # different schemas.
     _versions = {
         '2.16': bugzilla_2_16,
         '2.18': bugzilla_2_18,
         '3.0':  bugzilla_3_0
         }
 
     _default_bug_re = (r'bugs?\s*,?\s*(?:#|nos?\.?|num(?:ber)?s?)?\s*'
                        r'((?:\d+\s*(?:,?\s*(?:and)?)?\s*)+)')
 
     _bz = None
 
     def __init__(self, ui, repo):
         self.ui = ui
         self.repo = repo
 
     def bz(self):
         '''return object that knows how to talk to bugzilla version in
         use.'''
 
         if bugzilla._bz is None:
             bzversion = self.ui.config('bugzilla', 'version')
             try:
                 bzclass = bugzilla._versions[bzversion]
             except KeyError:
                 raise util.Abort(_('bugzilla version %s not supported') %
                                  bzversion)
             bugzilla._bz = bzclass(self.ui)
         return bugzilla._bz
 
     def __getattr__(self, key):
         return getattr(self.bz(), key)
 
     _bug_re = None
     _split_re = None
 
     def find_bug_ids(self, ctx):
         '''find valid bug ids that are referred to in changeset
         comments and that do not already have references to this
         changeset.'''
 
         if bugzilla._bug_re is None:
             bugzilla._bug_re = re.compile(
                 self.ui.config('bugzilla', 'regexp', bugzilla._default_bug_re),
                 re.IGNORECASE)
             bugzilla._split_re = re.compile(r'\D+')
         start = 0
         ids = set()
         while True:
             m = bugzilla._bug_re.search(ctx.description(), start)
             if not m:
                 break
             start = m.end()
             for id in bugzilla._split_re.split(m.group(1)):
                 if not id: continue
                 ids.add(int(id))
         if ids:
             ids = self.filter_real_bug_ids(ids)
         if ids:
             ids = self.filter_unknown_bug_ids(ctx.node(), ids)
         return ids
 
     def update(self, bugid, ctx):
         '''update bugzilla bug with reference to changeset.'''
 
         def webroot(root):
             '''strip leading prefix of repo root and turn into
             url-safe path.'''
             count = int(self.ui.config('bugzilla', 'strip', 0))
             root = util.pconvert(root)
             while count > 0:
                 c = root.find('/')
                 if c == -1:
                     break
                 root = root[c+1:]
                 count -= 1
             return root
 
         mapfile = self.ui.config('bugzilla', 'style')
         tmpl = self.ui.config('bugzilla', 'template')
         t = cmdutil.changeset_templater(self.ui, self.repo,
                                         False, None, mapfile, False)
         if not mapfile and not tmpl:
             tmpl = _('changeset {node|short} in repo {root} refers '
                      'to bug {bug}.\ndetails:\n\t{desc|tabindent}')
         if tmpl:
             tmpl = templater.parsestring(tmpl, quoted=False)
             t.use_template(tmpl)
         self.ui.pushbuffer()
         t.show(ctx, changes=ctx.changeset(),
                bug=str(bugid),
                hgweb=self.ui.config('web', 'baseurl'),
                root=self.repo.root,
                webroot=webroot(self.repo.root))
         data = self.ui.popbuffer()
         self.add_comment(bugid, data, util.email(ctx.user()))
 
 def hook(ui, repo, hooktype, node=None, **kwargs):
     '''add comment to bugzilla for each changeset that refers to a
     bugzilla bug id. only add a comment once per bug, so same change
     seen multiple times does not fill bug with duplicate data.'''
     try:
         import MySQLdb as mysql
         global MySQLdb
         MySQLdb = mysql
     except ImportError, err:
         raise util.Abort(_('python mysql support not available: %s') % err)
 
     if node is None:
         raise util.Abort(_('hook type %s does not pass a changeset id') %
                          hooktype)
     try:
         bz = bugzilla(ui, repo)
         ctx = repo[node]
         ids = bz.find_bug_ids(ctx)
         if ids:
             for id in ids:
                 bz.update(id, ctx)
             bz.notify(ids, util.email(ctx.user()))
     except MySQLdb.MySQLError, err:
         raise util.Abort(_('database error: %s') % err[1])
 

hgext/children.py

@@ -1,44 +1,44 b''
 # Mercurial extension to provide the 'hg children' command
 #
 # Copyright 2007 by Intevation GmbH <[e-mail]>
 #
 # Author(s):
 # Thomas Arendsen Hein <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''provides children command to show children changesets'''
+'''display children changesets'''
 
 from mercurial import cmdutil
 from mercurial.commands import templateopts
 from mercurial.i18n import _
 
 
 def children(ui, repo, file_=None, **opts):
     """show the children of the given or working directory revision
 
     Print the children of the working directory's revisions. If a
     revision is given via -r/--rev, the children of that revision will
     be printed. If a file argument is given, revision in which the
     file was last changed (after the working directory revision or the
     argument to --rev if given) is printed.
     """
     rev = opts.get('rev')
     if file_:
         ctx = repo.filectx(file_, changeid=rev)
     else:
         ctx = repo[rev]
 
     displayer = cmdutil.show_changeset(ui, repo, opts)
     for cctx in ctx.children():
         displayer.show(cctx)
 
 
 cmdtable = {
     "children":
         (children,
          [('r', 'rev', '', _('show children of the specified revision')),
          ] + templateopts,
          _('hg children [-r REV] [FILE]')),
 }

hgext/churn.py

@@ -1,174 +1,174 b''
 # churn.py - create a graph of revisions count grouped by template
 #
 # Copyright 2006 Josef "Jeff" Sipek <[e-mail]>
 # Copyright 2008 Alexander Solovyov <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''command to show certain statistics about revision history'''
+'''display statistics about repository history'''
 
 from mercurial.i18n import _
 from mercurial import patch, cmdutil, util, templater
 import sys, os
 import time, datetime
 
 def maketemplater(ui, repo, tmpl):
     tmpl = templater.parsestring(tmpl, quoted=False)
     try:
         t = cmdutil.changeset_templater(ui, repo, False, None, None, False)
     except SyntaxError, inst:
         raise util.Abort(inst.args[0])
     t.use_template(tmpl)
     return t
 
 def changedlines(ui, repo, ctx1, ctx2, fns):
     lines = 0
     fmatch = cmdutil.match(repo, pats=fns)
     diff = ''.join(patch.diff(repo, ctx1.node(), ctx2.node(), fmatch))
     for l in diff.split('\n'):
         if (l.startswith("+") and not l.startswith("+++ ") or
             l.startswith("-") and not l.startswith("--- ")):
             lines += 1
     return lines
 
 def countrate(ui, repo, amap, *pats, **opts):
     """Calculate stats"""
     if opts.get('dateformat'):
         def getkey(ctx):
             t, tz = ctx.date()
             date = datetime.datetime(*time.gmtime(float(t) - tz)[:6])
             return date.strftime(opts['dateformat'])
     else:
         tmpl = opts.get('template', '{author|email}')
         tmpl = maketemplater(ui, repo, tmpl)
         def getkey(ctx):
             ui.pushbuffer()
             tmpl.show(ctx)
             return ui.popbuffer()
 
     count = pct = 0
     rate = {}
     df = False
     if opts.get('date'):
         df = util.matchdate(opts['date'])
 
     get = util.cachefunc(lambda r: repo[r].changeset())
     changeiter, matchfn = cmdutil.walkchangerevs(ui, repo, pats, get, opts)
     for st, rev, fns in changeiter:
         if not st == 'add':
             continue
         if df and not df(get(rev)[2][0]): # doesn't match date format
             continue
 
         ctx = repo[rev]
         key = getkey(ctx)
         key = amap.get(key, key) # alias remap
         if opts.get('changesets'):
             rate[key] = rate.get(key, 0) + 1
         else:
             parents = ctx.parents()
             if len(parents) > 1:
                 ui.note(_('Revision %d is a merge, ignoring...\n') % (rev,))
                 continue
 
             ctx1 = parents[0]
             lines = changedlines(ui, repo, ctx1, ctx, fns)
             rate[key] = rate.get(key, 0) + lines
 
         if opts.get('progress'):
             count += 1
             newpct = int(100.0 * count / max(len(repo), 1))
             if pct < newpct:
                 pct = newpct
                 ui.write("\r" + _("generating stats: %d%%") % pct)
                 sys.stdout.flush()
 
     if opts.get('progress'):
         ui.write("\r")
         sys.stdout.flush()
 
     return rate
 
 
 def churn(ui, repo, *pats, **opts):
     '''histogram of changes to the repository
 
     This command will display a histogram representing the number
     of changed lines or revisions, grouped according to the given
     template. The default template will group changes by author.
     The --dateformat option may be used to group the results by
     date instead.
 
     Statistics are based on the number of changed lines, or
     alternatively the number of matching revisions if the
     --changesets option is specified.
 
     Examples:
 
       # display count of changed lines for every committer
       hg churn -t '{author|email}'
 
       # display daily activity graph
       hg churn -f '%H' -s -c
 
       # display activity of developers by month
       hg churn -f '%Y-%m' -s -c
 
       # display count of lines changed in every year
       hg churn -f '%Y' -s
 
     It is possible to map alternate email addresses to a main address
     by providing a file using the following format:
 
     <alias email> <actual email>
 
     Such a file may be specified with the --aliases option, otherwise a
     .hgchurn file will be looked for in the working directory root.
     '''
     def pad(s, l):
         return (s + " " * l)[:l]
 
     amap = {}
     aliases = opts.get('aliases')
     if not aliases and os.path.exists(repo.wjoin('.hgchurn')):
         aliases = repo.wjoin('.hgchurn')
     if aliases:
         for l in open(aliases, "r"):
             l = l.strip()
             alias, actual = l.split()
             amap[alias] = actual
 
     rate = countrate(ui, repo, amap, *pats, **opts).items()
     if not rate:
         return
 
     sortfn = ((not opts.get('sort')) and (lambda a, b: cmp(b[1], a[1])) or None)
     rate.sort(sortfn)
 
     maxcount = float(max([v for k, v in rate]))
     maxname = max([len(k) for k, v in rate])
 
     ttywidth = util.termwidth()
     ui.debug(_("assuming %i character terminal\n") % ttywidth)
     width = ttywidth - maxname - 2 - 6 - 2 - 2
 
     for date, count in rate:
         print "%s %6d %s" % (pad(date, maxname), count,
                              "*" * int(count * width / maxcount))
 
 
 cmdtable = {
     "churn":
         (churn,
          [('r', 'rev', [], _('count rate for the specified revision or range')),
           ('d', 'date', '', _('count rate for revisions matching date spec')),
           ('t', 'template', '{author|email}', _('template to group changesets')),
           ('f', 'dateformat', '',
               _('strftime-compatible format for grouping by date')),
           ('c', 'changesets', False, _('count rate by number of changesets')),
           ('s', 'sort', False, _('sort by key (default: sort by count)')),
           ('', 'aliases', '', _('file with email aliases')),
           ('', 'progress', None, _('show progress'))],
          _("hg churn [-d DATE] [-r REV] [--aliases FILE] [--progress] [FILE]")),
 }

hgext/color.py

@@ -1,266 +1,266 b''
 # color.py color output for the status and qseries commands
 #
 # Copyright (C) 2007 Kevin Christen <[e-mail]>
 #
 # This program is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by the
 # Free Software Foundation; either version 2 of the License, or (at your
 # option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
 # WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
 # Public License for more details.
 #
 # You should have received a copy of the GNU General Public License along
 # with this program; if not, write to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
-'''add color output to status, qseries, and diff-related commands
+'''colorize output from some commands
 
 This extension modifies the status command to add color to its output
 to reflect file status, the qseries command to add color to reflect
 patch status (applied, unapplied, missing), and to diff-related
 commands to highlight additions, removals, diff headers, and trailing
 whitespace.
 
 Other effects in addition to color, like bold and underlined text, are
 also available. Effects are rendered with the ECMA-48 SGR control
 function (aka ANSI escape codes). This module also provides the
 render_text function, which can be used to add effects to any text.
 
 Default effects may be overridden from the .hgrc file:
 
 [color]
 status.modified = blue bold underline red_background
 status.added = green bold
 status.removed = red bold blue_background
 status.deleted = cyan bold underline
 status.unknown = magenta bold underline
 status.ignored = black bold
 
 # 'none' turns off all effects
 status.clean = none
 status.copied = none
 
 qseries.applied = blue bold underline
 qseries.unapplied = black bold
 qseries.missing = red bold
 
 diff.diffline = bold
 diff.extended = cyan bold
 diff.file_a = red bold
 diff.file_b = green bold
 diff.hunk = magenta
 diff.deleted = red
 diff.inserted = green
 diff.changed = white
 diff.trailingwhitespace = bold red_background
 '''
 
 import os, sys
 
 from mercurial import cmdutil, commands, extensions
 from mercurial.i18n import _
 
 # start and stop parameters for effects
 _effect_params = {'none': 0,
                   'black': 30,
                   'red': 31,
                   'green': 32,
                   'yellow': 33,
                   'blue': 34,
                   'magenta': 35,
                   'cyan': 36,
                   'white': 37,
                   'bold': 1,
                   'italic': 3,
                   'underline': 4,
                   'inverse': 7,
                   'black_background': 40,
                   'red_background': 41,
                   'green_background': 42,
                   'yellow_background': 43,
                   'blue_background': 44,
                   'purple_background': 45,
                   'cyan_background': 46,
                   'white_background': 47}
 
 def render_effects(text, effects):
     'Wrap text in commands to turn on each effect.'
     start = [str(_effect_params[e]) for e in ['none'] + effects]
     start = '\033[' + ';'.join(start) + 'm'
     stop = '\033[' + str(_effect_params['none']) + 'm'
     return ''.join([start, text, stop])
 
 def colorstatus(orig, ui, repo, *pats, **opts):
     '''run the status command with colored output'''
 
     delimiter = opts['print0'] and '\0' or '\n'
 
     nostatus = opts.get('no_status')
     opts['no_status'] = False
     # run status and capture its output
     ui.pushbuffer()
     retval = orig(ui, repo, *pats, **opts)
     # filter out empty strings
     lines_with_status = [ line for line in ui.popbuffer().split(delimiter) if line ]
 
     if nostatus:
         lines = [l[2:] for l in lines_with_status]
     else:
         lines = lines_with_status
 
     # apply color to output and display it
     for i in xrange(len(lines)):
         status = _status_abbreviations[lines_with_status[i][0]]
         effects = _status_effects[status]
         if effects:
             lines[i] = render_effects(lines[i], effects)
         ui.write(lines[i] + delimiter)
     return retval
 
 _status_abbreviations = { 'M': 'modified',
                           'A': 'added',
                           'R': 'removed',
                           '!': 'deleted',
                           '?': 'unknown',
                           'I': 'ignored',
                           'C': 'clean',
                           ' ': 'copied', }
 
 _status_effects = { 'modified': ['blue', 'bold'],
                     'added': ['green', 'bold'],
                     'removed': ['red', 'bold'],
                     'deleted': ['cyan', 'bold', 'underline'],
                     'unknown': ['magenta', 'bold', 'underline'],
                     'ignored': ['black', 'bold'],
                     'clean': ['none'],
                     'copied': ['none'], }
 
 def colorqseries(orig, ui, repo, *dummy, **opts):
     '''run the qseries command with colored output'''
     ui.pushbuffer()
     retval = orig(ui, repo, **opts)
     patches = ui.popbuffer().splitlines()
     for patch in patches:
         patchname = patch
         if opts['summary']:
             patchname = patchname.split(': ')[0]
         if ui.verbose:
             patchname = patchname.split(' ', 2)[-1]
 
         if opts['missing']:
             effects = _patch_effects['missing']
         # Determine if patch is applied.
         elif [ applied for applied in repo.mq.applied
                if patchname == applied.name ]:
             effects = _patch_effects['applied']
         else:
             effects = _patch_effects['unapplied']
         ui.write(render_effects(patch, effects) + '\n')
     return retval
 
 _patch_effects = { 'applied': ['blue', 'bold', 'underline'],
                    'missing': ['red', 'bold'],
                    'unapplied': ['black', 'bold'], }
 
 def colorwrap(orig, s):
     '''wrap ui.write for colored diff output'''
     lines = s.split('\n')
     for i, line in enumerate(lines):
         stripline = line
         if line and line[0] in '+-':
             # highlight trailing whitespace, but only in changed lines
             stripline = line.rstrip()
         for prefix, style in _diff_prefixes:
             if stripline.startswith(prefix):
                 lines[i] = render_effects(stripline, _diff_effects[style])
                 break
         if line != stripline:
             lines[i] += render_effects(
                 line[len(stripline):], _diff_effects['trailingwhitespace'])
     orig('\n'.join(lines))
 
 def colorshowpatch(orig, self, node):
     '''wrap cmdutil.changeset_printer.showpatch with colored output'''
     oldwrite = extensions.wrapfunction(self.ui, 'write', colorwrap)
     try:
         orig(self, node)
     finally:
         self.ui.write = oldwrite
 
 def colordiff(orig, ui, repo, *pats, **opts):
     '''run the diff command with colored output'''
     oldwrite = extensions.wrapfunction(ui, 'write', colorwrap)
     try:
         orig(ui, repo, *pats, **opts)
     finally:
         ui.write = oldwrite
 
 _diff_prefixes = [('diff', 'diffline'),
                   ('copy', 'extended'),
                   ('rename', 'extended'),
                   ('old', 'extended'),
                   ('new', 'extended'),
                   ('deleted', 'extended'),
                   ('---', 'file_a'),
                   ('+++', 'file_b'),
                   ('@', 'hunk'),
                   ('-', 'deleted'),
                   ('+', 'inserted')]
 
 _diff_effects = {'diffline': ['bold'],
                  'extended': ['cyan', 'bold'],
                  'file_a': ['red', 'bold'],
                  'file_b': ['green', 'bold'],
                  'hunk': ['magenta'],
                  'deleted': ['red'],
                  'inserted': ['green'],
                  'changed': ['white'],
                  'trailingwhitespace': ['bold', 'red_background']}
 
 def uisetup(ui):
     '''Initialize the extension.'''
     _setupcmd(ui, 'diff', commands.table, colordiff, _diff_effects)
     _setupcmd(ui, 'incoming', commands.table, None, _diff_effects)
     _setupcmd(ui, 'log', commands.table, None, _diff_effects)
     _setupcmd(ui, 'outgoing', commands.table, None, _diff_effects)
     _setupcmd(ui, 'tip', commands.table, None, _diff_effects)
     _setupcmd(ui, 'status', commands.table, colorstatus, _status_effects)
     try:
         mq = extensions.find('mq')
         _setupcmd(ui, 'qdiff', mq.cmdtable, colordiff, _diff_effects)
         _setupcmd(ui, 'qseries', mq.cmdtable, colorqseries, _patch_effects)
     except KeyError:
         # The mq extension is not enabled
         pass
 
 def _setupcmd(ui, cmd, table, func, effectsmap):
     '''patch in command to command table and load effect map'''
     def nocolor(orig, *args, **opts):
 
         if (opts['no_color'] or opts['color'] == 'never' or
             (opts['color'] == 'auto' and (os.environ.get('TERM') == 'dumb'
                                           or not sys.__stdout__.isatty()))):
             return orig(*args, **opts)
 
         oldshowpatch = extensions.wrapfunction(cmdutil.changeset_printer,
                                                'showpatch', colorshowpatch)
         try:
             if func is not None:
                 return func(orig, *args, **opts)
             return orig(*args, **opts)
         finally:
             cmdutil.changeset_printer.showpatch = oldshowpatch
 
     entry = extensions.wrapcommand(table, cmd, nocolor)
     entry[1].extend([
         ('', 'color', 'auto', _("when to colorize (always, auto, or never)")),
         ('', 'no-color', None, _("don't colorize output")),
     ])
 
     for status in effectsmap:
         effects = ui.configlist('color', cmd + '.' + status)
         if effects:
             effectsmap[status] = effects

hgext/convert/__init__.py

@@ -1,288 +1,288 b''
 # convert.py Foreign SCM converter
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''converting foreign VCS repositories to Mercurial'''
+'''import from foreign VCS repositories into Mercurial'''
 
 import convcmd
 import cvsps
 import subversion
 from mercurial import commands
 from mercurial.i18n import _
 
 # Commands definition was moved elsewhere to ease demandload job.
 
 def convert(ui, src, dest=None, revmapfile=None, **opts):
     """convert a foreign SCM repository to a Mercurial one.
 
     Accepted source formats [identifiers]:
     - Mercurial [hg]
     - CVS [cvs]
     - Darcs [darcs]
     - git [git]
     - Subversion [svn]
     - Monotone [mtn]
     - GNU Arch [gnuarch]
     - Bazaar [bzr]
     - Perforce [p4]
 
     Accepted destination formats [identifiers]:
     - Mercurial [hg]
     - Subversion [svn] (history on branches is not preserved)
 
     If no revision is given, all revisions will be converted.
     Otherwise, convert will only import up to the named revision
     (given in a format understood by the source).
 
     If no destination directory name is specified, it defaults to the
     basename of the source with '-hg' appended. If the destination
     repository doesn't exist, it will be created.
 
     By default, all sources except Mercurial will use
     --branchsort. Mercurial uses --sourcesort to preserve original
     revision numbers order. Sort modes have the following effects:
       --branchsort: convert from parent to child revision when
         possible, which means branches are usually converted one after
         the other. It generates more compact repositories.
       --datesort: sort revisions by date. Converted repositories have
         good-looking changelogs but are often an order of magnitude
         larger than the same ones generated by --branchsort.
       --sourcesort: try to preserve source revisions order, only
         supported by Mercurial sources.
 
     If <REVMAP> isn't given, it will be put in a default location
     (<dest>/.hg/shamap by default). The <REVMAP> is a simple text file
     that maps each source commit ID to the destination ID for that
     revision, like so:
     <source ID> <destination ID>
 
     If the file doesn't exist, it's automatically created. It's
     updated on each commit copied, so convert-repo can be interrupted
     and can be run repeatedly to copy new commits.
 
     The [username mapping] file is a simple text file that maps each
     source commit author to a destination commit author. It is handy
     for source SCMs that use unix logins to identify authors (eg:
     CVS). One line per author mapping and the line format is:
     srcauthor=whatever string you want
 
     The filemap is a file that allows filtering and remapping of files
     and directories. Comment lines start with '#'. Each line can
     contain one of the following directives:
 
       include path/to/file
 
       exclude path/to/file
 
       rename from/file to/file
 
     The 'include' directive causes a file, or all files under a
     directory, to be included in the destination repository, and the
     exclusion of all other files and directories not explicitly included.
     The 'exclude' directive causes files or directories to be omitted.
     The 'rename' directive renames a file or directory. To rename from
     a subdirectory into the root of the repository, use '.' as the
     path to rename to.
 
     The splicemap is a file that allows insertion of synthetic
     history, letting you specify the parents of a revision. This is
     useful if you want to e.g. give a Subversion merge two parents, or
     graft two disconnected series of history together. Each entry
     contains a key, followed by a space, followed by one or two
     comma-separated values. The key is the revision ID in the source
     revision control system whose parents should be modified (same
     format as a key in .hg/shamap). The values are the revision IDs
     (in either the source or destination revision control system) that
     should be used as the new parents for that node.
 
     The branchmap is a file that allows you to rename a branch when it is
     being brought in from whatever external repository. When used in
     conjunction with a splicemap, it allows for a powerful combination
     to help fix even the most badly mismanaged repositories and turn them
     into nicely structured Mercurial repositories. The branchmap contains
     lines of the form "original_branch_name new_branch_name".
     "original_branch_name" is the name of the branch in the source
     repository, and "new_branch_name" is the name of the branch is the
     destination repository. This can be used to (for instance) move code
     in one repository from "default" to a named branch.
 
     Mercurial Source
     -----------------
 
     --config convert.hg.ignoreerrors=False    (boolean)
         ignore integrity errors when reading. Use it to fix Mercurial
         repositories with missing revlogs, by converting from and to
         Mercurial.
     --config convert.hg.saverev=False         (boolean)
         store original revision ID in changeset (forces target IDs to
         change)
     --config convert.hg.startrev=0            (hg revision identifier)
         convert start revision and its descendants
 
     CVS Source
     ----------
 
     CVS source will use a sandbox (i.e. a checked-out copy) from CVS
     to indicate the starting point of what will be converted. Direct
     access to the repository files is not needed, unless of course the
     repository is :local:. The conversion uses the top level directory
     in the sandbox to find the CVS repository, and then uses CVS rlog
     commands to find files to convert. This means that unless a
     filemap is given, all files under the starting directory will be
     converted, and that any directory reorganization in the CVS
     sandbox is ignored.
 
     Because CVS does not have changesets, it is necessary to collect
     individual commits to CVS and merge them into changesets. CVS
     source uses its internal changeset merging code by default but can
     be configured to call the external 'cvsps' program by setting:
         --config convert.cvsps='cvsps -A -u --cvs-direct -q'
     This option is deprecated and will be removed in Mercurial 1.4.
 
     The options shown are the defaults.
 
     Internal cvsps is selected by setting
         --config convert.cvsps=builtin
     and has a few more configurable options:
         --config convert.cvsps.cache=True     (boolean)
             Set to False to disable remote log caching, for testing and
             debugging purposes.
         --config convert.cvsps.fuzz=60        (integer)
             Specify the maximum time (in seconds) that is allowed
             between commits with identical user and log message in a
             single changeset. When very large files were checked in as
             part of a changeset then the default may not be long
             enough.
         --config convert.cvsps.mergeto='{{mergetobranch ([-\\w]+)}}'
             Specify a regular expression to which commit log messages
             are matched. If a match occurs, then the conversion
             process will insert a dummy revision merging the branch on
             which this log message occurs to the branch indicated in
             the regex.
         --config convert.cvsps.mergefrom='{{mergefrombranch ([-\\w]+)}}'
             Specify a regular expression to which commit log messages
             are matched. If a match occurs, then the conversion
             process will add the most recent revision on the branch
             indicated in the regex as the second parent of the
             changeset.
 
     The hgext/convert/cvsps wrapper script allows the builtin
     changeset merging code to be run without doing a conversion. Its
     parameters and output are similar to that of cvsps 2.1.
 
     Subversion Source
     -----------------
 
     Subversion source detects classical trunk/branches/tags layouts.
     By default, the supplied "svn://repo/path/" source URL is
     converted as a single branch. If "svn://repo/path/trunk" exists it
     replaces the default branch. If "svn://repo/path/branches" exists,
     its subdirectories are listed as possible branches. If
     "svn://repo/path/tags" exists, it is looked for tags referencing
     converted branches. Default "trunk", "branches" and "tags" values
     can be overridden with following options. Set them to paths
     relative to the source URL, or leave them blank to disable auto
     detection.
 
     --config convert.svn.branches=branches    (directory name)
         specify the directory containing branches
     --config convert.svn.tags=tags            (directory name)
         specify the directory containing tags
     --config convert.svn.trunk=trunk          (directory name)
         specify the name of the trunk branch
 
     Source history can be retrieved starting at a specific revision,
     instead of being integrally converted. Only single branch
     conversions are supported.
 
     --config convert.svn.startrev=0           (svn revision number)
         specify start Subversion revision.
 
     Perforce Source
     ---------------
 
     The Perforce (P4) importer can be given a p4 depot path or a
     client specification as source. It will convert all files in the
     source to a flat Mercurial repository, ignoring labels, branches
     and integrations. Note that when a depot path is given you then
     usually should specify a target directory, because otherwise the
     target may be named ...-hg.
 
     It is possible to limit the amount of source history to be
     converted by specifying an initial Perforce revision.
 
     --config convert.p4.startrev=0            (perforce changelist number)
         specify initial Perforce revision.
 
 
     Mercurial Destination
     ---------------------
 
     --config convert.hg.clonebranches=False   (boolean)
         dispatch source branches in separate clones.
     --config convert.hg.tagsbranch=default    (branch name)
         tag revisions branch name
     --config convert.hg.usebranchnames=True   (boolean)
         preserve branch names
 
     """
     return convcmd.convert(ui, src, dest, revmapfile, **opts)
 
 def debugsvnlog(ui, **opts):
     return subversion.debugsvnlog(ui, **opts)
 
 def debugcvsps(ui, *args, **opts):
     '''create changeset information from CVS
 
     This command is intended as a debugging tool for the CVS to
     Mercurial converter, and can be used as a direct replacement for
     cvsps.
 
     Hg debugcvsps reads the CVS rlog for current directory (or any
     named directory) in the CVS repository, and converts the log to a
     series of changesets based on matching commit log entries and
     dates.'''
     return cvsps.debugcvsps(ui, *args, **opts)
 
 commands.norepo += " convert debugsvnlog debugcvsps"
 
 cmdtable = {
     "convert":
         (convert,
          [('A', 'authors', '', _('username mapping filename')),
           ('d', 'dest-type', '', _('destination repository type')),
           ('', 'filemap', '', _('remap file names using contents of file')),
           ('r', 'rev', '', _('import up to target revision REV')),
           ('s', 'source-type', '', _('source repository type')),
           ('', 'splicemap', '', _('splice synthesized history into place')),
           ('', 'branchmap', '', _('change branch names while converting')),
           ('', 'branchsort', None, _('try to sort changesets by branches')),
           ('', 'datesort', None, _('try to sort changesets by date')),
           ('', 'sourcesort', None, _('preserve source changesets order'))],
          _('hg convert [OPTION]... SOURCE [DEST [REVMAP]]')),
     "debugsvnlog":
         (debugsvnlog,
          [],
          'hg debugsvnlog'),
     "debugcvsps":
         (debugcvsps,
          [
           # Main options shared with cvsps-2.1
           ('b', 'branches', [], _('only return changes on specified branches')),
           ('p', 'prefix', '', _('prefix to remove from file names')),
           ('r', 'revisions', [], _('only return changes after or between specified tags')),
           ('u', 'update-cache', None, _("update cvs log cache")),
           ('x', 'new-cache', None, _("create new cvs log cache")),
           ('z', 'fuzz', 60, _('set commit time fuzz in seconds')),
           ('', 'root', '', _('specify cvsroot')),
           # Options specific to builtin cvsps
           ('', 'parents', '', _('show parent changesets')),
           ('', 'ancestors', '', _('show current changeset in ancestor branches')),
           # Options that are ignored for compatibility with cvsps-2.1
           ('A', 'cvs-direct', None, _('ignored for compatibility')),
          ],
          _('hg debugcvsps [OPTION]... [PATH]...')),
 }

hgext/convert/common.py

@@ -1,384 +1,389 b''
 # common.py - common code for the convert extension
 #
 #  Copyright 2005-2009 Matt Mackall <[e-mail]> and others
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
 import base64, errno
 import os
 import cPickle as pickle
 from mercurial import util
 from mercurial.i18n import _
 
 def encodeargs(args):
     def encodearg(s):
         lines = base64.encodestring(s)
         lines = [l.splitlines()[0] for l in lines]
         return ''.join(lines)
 
     s = pickle.dumps(args)
     return encodearg(s)
 
 def decodeargs(s):
     s = base64.decodestring(s)
     return pickle.loads(s)
 
 class MissingTool(Exception): pass
 
 def checktool(exe, name=None, abort=True):
     name = name or exe
     if not util.find_exe(exe):
         exc = abort and util.Abort or MissingTool
         raise exc(_('cannot find required "%s" tool') % name)
 
 class NoRepo(Exception): pass
 
 SKIPREV = 'SKIP'
 
 class commit(object):
     def __init__(self, author, date, desc, parents, branch=None, rev=None,
                  extra={}, sortkey=None):
         self.author = author or 'unknown'
         self.date = date or '0 0'
         self.desc = desc
         self.parents = parents
         self.branch = branch
         self.rev = rev
         self.extra = extra
         self.sortkey = sortkey
 
 class converter_source(object):
     """Conversion source interface"""
 
     def __init__(self, ui, path=None, rev=None):
         """Initialize conversion source (or raise NoRepo("message")
         exception if path is not a valid repository)"""
         self.ui = ui
         self.path = path
         self.rev = rev
 
         self.encoding = 'utf-8'
 
     def before(self):
         pass
 
     def after(self):
         pass
 
     def setrevmap(self, revmap):
         """set the map of already-converted revisions"""
         pass
 
     def getheads(self):
         """Return a list of this repository's heads"""
         raise NotImplementedError()
 
     def getfile(self, name, rev):
         """Return file contents as a string. rev is the identifier returned
         by a previous call to getchanges(). Raise IOError to indicate that
         name was deleted in rev.
         """
         raise NotImplementedError()
 
     def getmode(self, name, rev):
         """Return file mode, eg. '', 'x', or 'l'. rev is the identifier
         returned by a previous call to getchanges().
         """
         raise NotImplementedError()
 
     def getchanges(self, version):
         """Returns a tuple of (files, copies).
 
         files is a sorted list of (filename, id) tuples for all files
         changed between version and its first parent returned by
         getcommit(). id is the source revision id of the file.
 
         copies is a dictionary of dest: source
         """
         raise NotImplementedError()
 
     def getcommit(self, version):
         """Return the commit object for version"""
         raise NotImplementedError()
 
     def gettags(self):
-        """Return the tags as a dictionary of name: revision"""
+        """Return the tags as a dictionary of name: revision
+
+        Tag names must be UTF-8 strings.
+        """
         raise NotImplementedError()
 
     def recode(self, s, encoding=None):
         if not encoding:
             encoding = self.encoding or 'utf-8'
 
         if isinstance(s, unicode):
             return s.encode("utf-8")
         try:
             return s.decode(encoding).encode("utf-8")
         except:
             try:
                 return s.decode("latin-1").encode("utf-8")
             except:
                 return s.decode(encoding, "replace").encode("utf-8")
 
     def getchangedfiles(self, rev, i):
         """Return the files changed by rev compared to parent[i].
 
         i is an index selecting one of the parents of rev.  The return
         value should be the list of files that are different in rev and
         this parent.
 
         If rev has no parents, i is None.
 
         This function is only needed to support --filemap
         """
         raise NotImplementedError()
 
     def converted(self, rev, sinkrev):
         '''Notify the source that a revision has been converted.'''
         pass
 
     def hasnativeorder(self):
         """Return true if this source has a meaningful, native revision
         order. For instance, Mercurial revisions are store sequentially
         while there is no such global ordering with Darcs.
         """
         return False
 
     def lookuprev(self, rev):
         """If rev is a meaningful revision reference in source, return
         the referenced identifier in the same format used by getcommit().
         return None otherwise.
         """
         return None
 
 class converter_sink(object):
     """Conversion sink (target) interface"""
 
     def __init__(self, ui, path):
         """Initialize conversion sink (or raise NoRepo("message")
         exception if path is not a valid repository)
 
         created is a list of paths to remove if a fatal error occurs
         later"""
         self.ui = ui
         self.path = path
         self.created = []
 
     def getheads(self):
         """Return a list of this repository's heads"""
         raise NotImplementedError()
 
     def revmapfile(self):
         """Path to a file that will contain lines
         source_rev_id sink_rev_id
         mapping equivalent revision identifiers for each system."""
         raise NotImplementedError()
 
     def authorfile(self):
         """Path to a file that will contain lines
         srcauthor=dstauthor
         mapping equivalent authors identifiers for each system."""
         return None
 
     def putcommit(self, files, copies, parents, commit, source, revmap):
         """Create a revision with all changed files listed in 'files'
         and having listed parents. 'commit' is a commit object
         containing at a minimum the author, date, and message for this
         changeset.  'files' is a list of (path, version) tuples,
         'copies' is a dictionary mapping destinations to sources,
         'source' is the source repository, and 'revmap' is a mapfile
         of source revisions to converted revisions. Only getfile(),
         getmode(), and lookuprev() should be called on 'source'.
 
         Note that the sink repository is not told to update itself to
         a particular revision (or even what that revision would be)
         before it receives the file data.
         """
         raise NotImplementedError()
 
     def puttags(self, tags):
         """Put tags into sink.
-        tags: {tagname: sink_rev_id, ...}"""
+
+        tags: {tagname: sink_rev_id, ...} where tagname is an UTF-8 string.
+        """
         raise NotImplementedError()
 
     def setbranch(self, branch, pbranches):
         """Set the current branch name. Called before the first putcommit
         on the branch.
         branch: branch name for subsequent commits
         pbranches: (converted parent revision, parent branch) tuples"""
         pass
 
     def setfilemapmode(self, active):
         """Tell the destination that we're using a filemap
 
         Some converter_sources (svn in particular) can claim that a file
         was changed in a revision, even if there was no change.  This method
         tells the destination that we're using a filemap and that it should
         filter empty revisions.
         """
         pass
 
     def before(self):
         pass
 
     def after(self):
         pass
 
 
 class commandline(object):
     def __init__(self, ui, command):
         self.ui = ui
         self.command = command
 
     def prerun(self):
         pass
 
     def postrun(self):
         pass
 
     def _cmdline(self, cmd, *args, **kwargs):
         cmdline = [self.command, cmd] + list(args)
         for k, v in kwargs.iteritems():
             if len(k) == 1:
                 cmdline.append('-' + k)
             else:
                 cmdline.append('--' + k.replace('_', '-'))
             try:
                 if len(k) == 1:
                     cmdline.append('' + v)
                 else:
                     cmdline[-1] += '=' + v
             except TypeError:
                 pass
         cmdline = [util.shellquote(arg) for arg in cmdline]
         if not self.ui.debugflag:
             cmdline += ['2>', util.nulldev]
         cmdline += ['<', util.nulldev]
         cmdline = ' '.join(cmdline)
         return cmdline
 
     def _run(self, cmd, *args, **kwargs):
         cmdline = self._cmdline(cmd, *args, **kwargs)
         self.ui.debug(_('running: %s\n') % (cmdline,))
         self.prerun()
         try:
             return util.popen(cmdline)
         finally:
             self.postrun()
 
     def run(self, cmd, *args, **kwargs):
         fp = self._run(cmd, *args, **kwargs)
         output = fp.read()
         self.ui.debug(output)
         return output, fp.close()
 
     def runlines(self, cmd, *args, **kwargs):
         fp = self._run(cmd, *args, **kwargs)
         output = fp.readlines()
         self.ui.debug(''.join(output))
         return output, fp.close()
 
     def checkexit(self, status, output=''):
         if status:
             if output:
                 self.ui.warn(_('%s error:\n') % self.command)
                 self.ui.warn(output)
             msg = util.explain_exit(status)[0]
             raise util.Abort(_('%s %s') % (self.command, msg))
 
     def run0(self, cmd, *args, **kwargs):
         output, status = self.run(cmd, *args, **kwargs)
         self.checkexit(status, output)
         return output
 
     def runlines0(self, cmd, *args, **kwargs):
         output, status = self.runlines(cmd, *args, **kwargs)
         self.checkexit(status, ''.join(output))
         return output
 
     def getargmax(self):
         if '_argmax' in self.__dict__:
             return self._argmax
 
         # POSIX requires at least 4096 bytes for ARG_MAX
         self._argmax = 4096
         try:
             self._argmax = os.sysconf("SC_ARG_MAX")
         except:
             pass
 
         # Windows shells impose their own limits on command line length,
         # down to 2047 bytes for cmd.exe under Windows NT/2k and 2500 bytes
         # for older 4nt.exe. See http://support.microsoft.com/kb/830473 for
         # details about cmd.exe limitations.
 
         # Since ARG_MAX is for command line _and_ environment, lower our limit
         # (and make happy Windows shells while doing this).
 
         self._argmax = self._argmax/2 - 1
         return self._argmax
 
     def limit_arglist(self, arglist, cmd, *args, **kwargs):
         limit = self.getargmax() - len(self._cmdline(cmd, *args, **kwargs))
         bytes = 0
         fl = []
         for fn in arglist:
             b = len(fn) + 3
             if bytes + b < limit or len(fl) == 0:
                 fl.append(fn)
                 bytes += b
             else:
                 yield fl
                 fl = [fn]
                 bytes = b
         if fl:
             yield fl
 
     def xargs(self, arglist, cmd, *args, **kwargs):
         for l in self.limit_arglist(arglist, cmd, *args, **kwargs):
             self.run0(cmd, *(list(args) + l), **kwargs)
 
 class mapfile(dict):
     def __init__(self, ui, path):
         super(mapfile, self).__init__()
         self.ui = ui
         self.path = path
         self.fp = None
         self.order = []
         self._read()
 
     def _read(self):
         if not self.path:
             return
         try:
             fp = open(self.path, 'r')
         except IOError, err:
             if err.errno != errno.ENOENT:
                 raise
             return
         for i, line in enumerate(fp):
             try:
                 key, value = line[:-1].rsplit(' ', 1)
             except ValueError:
                 raise util.Abort(_('syntax error in %s(%d): key/value pair expected')
                                  % (self.path, i+1))
             if key not in self:
                 self.order.append(key)
             super(mapfile, self).__setitem__(key, value)
         fp.close()
 
     def __setitem__(self, key, value):
         if self.fp is None:
             try:
                 self.fp = open(self.path, 'a')
             except IOError, err:
                 raise util.Abort(_('could not open map file %r: %s') %
                                  (self.path, err.strerror))
         self.fp.write('%s %s\n' % (key, value))
         self.fp.flush()
         super(mapfile, self).__setitem__(key, value)
 
     def close(self):
         if self.fp:
             self.fp.close()
             self.fp = None

hgext/convert/cvsps.py

@@ -1,836 +1,838 b''
 #
 # Mercurial built-in replacement for cvsps.
 #
 # Copyright 2008, Frank Kingswood <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
 import os
 import re
 import cPickle as pickle
 from mercurial import util
 from mercurial.i18n import _
 
 def listsort(list, key):
     "helper to sort by key in Python 2.3"
     try:
         list.sort(key=key)
     except TypeError:
         list.sort(lambda l, r: cmp(key(l), key(r)))
 
 class logentry(object):
     '''Class logentry has the following attributes:
         .author    - author name as CVS knows it
         .branch    - name of branch this revision is on
         .branches  - revision tuple of branches starting at this revision
         .comment   - commit message
         .date      - the commit date as a (time, tz) tuple
         .dead      - true if file revision is dead
         .file      - Name of file
         .lines     - a tuple (+lines, -lines) or None
         .parent    - Previous revision of this entry
         .rcs       - name of file as returned from CVS
         .revision  - revision number as tuple
         .tags      - list of tags on the file
         .synthetic - is this a synthetic "file ... added on ..." revision?
         .mergepoint- the branch that has been merged from
                      (if present in rlog output)
         .branchpoints- the branches that start at the current entry
     '''
     def __init__(self, **entries):
         self.__dict__.update(entries)
 
     def __repr__(self):
         return "<%s at 0x%x: %s %s>" % (self.__class__.__name__,
                                         id(self),
                                         self.file,
                                         ".".join(map(str, self.revision)))
 
 class logerror(Exception):
     pass
 
 def getrepopath(cvspath):
     """Return the repository path from a CVS path.
 
     >>> getrepopath('/foo/bar')
     '/foo/bar'
     >>> getrepopath('c:/foo/bar')
     'c:/foo/bar'
     >>> getrepopath(':pserver:10/foo/bar')
     '/foo/bar'
     >>> getrepopath(':pserver:10c:/foo/bar')
     '/foo/bar'
     >>> getrepopath(':pserver:/foo/bar')
     '/foo/bar'
     >>> getrepopath(':pserver:c:/foo/bar')
     'c:/foo/bar'
     >>> getrepopath(':pserver:[e-mail]:/foo/bar')
     '/foo/bar'
     >>> getrepopath(':pserver:[e-mail]:c:/foo/bar')
     'c:/foo/bar'
     """
     # According to CVS manual, CVS paths are expressed like:
     # [:method:][[user][:password]@]hostname[:[port]]/path/to/repository
     #
     # Unfortunately, Windows absolute paths start with a drive letter
     # like 'c:' making it harder to parse. Here we assume that drive
     # letters are only one character long and any CVS component before
     # the repository path is at least 2 characters long, and use this
     # to disambiguate.
     parts = cvspath.split(':')
     if len(parts) == 1:
         return parts[0]
     # Here there is an ambiguous case if we have a port number
     # immediately followed by a Windows driver letter. We assume this
     # never happens and decide it must be CVS path component,
     # therefore ignoring it.
     if len(parts[-2]) > 1:
         return parts[-1].lstrip('0123456789')
     return parts[-2] + ':' + parts[-1]
 
 def createlog(ui, directory=None, root="", rlog=True, cache=None):
     '''Collect the CVS rlog'''
 
     # Because we store many duplicate commit log messages, reusing strings
     # saves a lot of memory and pickle storage space.
     _scache = {}
     def scache(s):
         "return a shared version of a string"
         return _scache.setdefault(s, s)
 
     ui.status(_('collecting CVS rlog\n'))
 
     log = []      # list of logentry objects containing the CVS state
 
     # patterns to match in CVS (r)log output, by state of use
     re_00 = re.compile('RCS file: (.+)$')
     re_01 = re.compile('cvs \\[r?log aborted\\]: (.+)$')
     re_02 = re.compile('cvs (r?log|server): (.+)\n$')
     re_03 = re.compile("(Cannot access.+CVSROOT)|"
                        "(can't create temporary directory.+)$")
     re_10 = re.compile('Working file: (.+)$')
     re_20 = re.compile('symbolic names:')
     re_30 = re.compile('\t(.+): ([\\d.]+)$')
     re_31 = re.compile('----------------------------$')
     re_32 = re.compile('======================================='
                        '======================================$')
     re_50 = re.compile('revision ([\\d.]+)(\s+locked by:\s+.+;)?$')
     re_60 = re.compile(r'date:\s+(.+);\s+author:\s+(.+);\s+state:\s+(.+?);'
                        r'(\s+lines:\s+(\+\d+)?\s+(-\d+)?;)?'
                        r'(.*mergepoint:\s+([^;]+);)?')
     re_70 = re.compile('branches: (.+);$')
 
     file_added_re = re.compile(r'file [^/]+ was (initially )?added on branch')
 
     prefix = ''   # leading path to strip of what we get from CVS
 
     if directory is None:
         # Current working directory
 
         # Get the real directory in the repository
         try:
             prefix = file(os.path.join('CVS','Repository')).read().strip()
             if prefix == ".":
                 prefix = ""
             directory = prefix
         except IOError:
             raise logerror('Not a CVS sandbox')
 
         if prefix and not prefix.endswith(os.sep):
             prefix += os.sep
 
         # Use the Root file in the sandbox, if it exists
         try:
             root = file(os.path.join('CVS','Root')).read().strip()
         except IOError:
             pass
 
     if not root:
         root = os.environ.get('CVSROOT', '')
 
     # read log cache if one exists
     oldlog = []
     date = None
 
     if cache:
         cachedir = os.path.expanduser('~/.hg.cvsps')
         if not os.path.exists(cachedir):
             os.mkdir(cachedir)
 
         # The cvsps cache pickle needs a uniquified name, based on the
         # repository location. The address may have all sort of nasties
         # in it, slashes, colons and such. So here we take just the
         # alphanumerics, concatenated in a way that does not mix up the
         # various components, so that
         #    :pserver:user@server:/path
         # and
         #    /pserver/user/server/path
         # are mapped to different cache file names.
         cachefile = root.split(":") + [directory, "cache"]
         cachefile = ['-'.join(re.findall(r'\w+', s)) for s in cachefile if s]
         cachefile = os.path.join(cachedir,
                                  '.'.join([s for s in cachefile if s]))
 
     if cache == 'update':
         try:
             ui.note(_('reading cvs log cache %s\n') % cachefile)
             oldlog = pickle.load(file(cachefile))
             ui.note(_('cache has %d log entries\n') % len(oldlog))
         except Exception, e:
             ui.note(_('error reading cache: %r\n') % e)
 
         if oldlog:
             date = oldlog[-1].date    # last commit date as a (time,tz) tuple
             date = util.datestr(date, '%Y/%m/%d %H:%M:%S %1%2')
 
     # build the CVS commandline
     cmd = ['cvs', '-q']
     if root:
         cmd.append('-d%s' % root)
         p = util.normpath(getrepopath(root))
         if not p.endswith('/'):
             p += '/'
         prefix = p + util.normpath(prefix)
     cmd.append(['log', 'rlog'][rlog])
     if date:
         # no space between option and date string
         cmd.append('-d>%s' % date)
     cmd.append(directory)
 
     # state machine begins here
     tags = {}     # dictionary of revisions on current file with their tags
     branchmap = {} # mapping between branch names and revision numbers
     state = 0
     store = False # set when a new record can be appended
 
     cmd = [util.shellquote(arg) for arg in cmd]
     ui.note(_("running %s\n") % (' '.join(cmd)))
     ui.debug(_("prefix=%r directory=%r root=%r\n") % (prefix, directory, root))
 
     pfp = util.popen(' '.join(cmd))
     peek = pfp.readline()
     while True:
         line = peek
         if line == '':
             break
         peek = pfp.readline()
         if line.endswith('\n'):
             line = line[:-1]
         #ui.debug('state=%d line=%r\n' % (state, line))
 
         if state == 0:
             # initial state, consume input until we see 'RCS file'
             match = re_00.match(line)
             if match:
                 rcs = match.group(1)
                 tags = {}
                 if rlog:
                     filename = util.normpath(rcs[:-2])
                     if filename.startswith(prefix):
                         filename = filename[len(prefix):]
                     if filename.startswith('/'):
                         filename = filename[1:]
                     if filename.startswith('Attic/'):
                         filename = filename[6:]
                     else:
                         filename = filename.replace('/Attic/', '/')
                     state = 2
                     continue
                 state = 1
                 continue
             match = re_01.match(line)
             if match:
                 raise Exception(match.group(1))
             match = re_02.match(line)
             if match:
                 raise Exception(match.group(2))
             if re_03.match(line):
                 raise Exception(line)
 
         elif state == 1:
             # expect 'Working file' (only when using log instead of rlog)
             match = re_10.match(line)
             assert match, _('RCS file must be followed by working file')
             filename = util.normpath(match.group(1))
             state = 2
 
         elif state == 2:
             # expect 'symbolic names'
             if re_20.match(line):
                 branchmap = {}
                 state = 3
 
         elif state == 3:
             # read the symbolic names and store as tags
             match = re_30.match(line)
             if match:
                 rev = [int(x) for x in match.group(2).split('.')]
 
                 # Convert magic branch number to an odd-numbered one
                 revn = len(rev)
                 if revn > 3 and (revn % 2) == 0 and rev[-2] == 0:
                     rev = rev[:-2] + rev[-1:]
                 rev = tuple(rev)
 
                 if rev not in tags:
                     tags[rev] = []
                 tags[rev].append(match.group(1))
                 branchmap[match.group(1)] = match.group(2)
 
             elif re_31.match(line):
                 state = 5
             elif re_32.match(line):
                 state = 0
 
         elif state == 4:
             # expecting '------' separator before first revision
             if re_31.match(line):
                 state = 5
             else:
                 assert not re_32.match(line), _('must have at least '
                                                 'some revisions')
 
         elif state == 5:
             # expecting revision number and possibly (ignored) lock indication
             # we create the logentry here from values stored in states 0 to 4,
             # as this state is re-entered for subsequent revisions of a file.
             match = re_50.match(line)
             assert match, _('expected revision number')
             e = logentry(rcs=scache(rcs), file=scache(filename),
                     revision=tuple([int(x) for x in match.group(1).split('.')]),
                     branches=[], parent=None,
                     synthetic=False)
             state = 6
 
         elif state == 6:
             # expecting date, author, state, lines changed
             match = re_60.match(line)
             assert match, _('revision must be followed by date line')
             d = match.group(1)
             if d[2] == '/':
                 # Y2K
                 d = '19' + d
 
             if len(d.split()) != 3:
                 # cvs log dates always in GMT
                 d = d + ' UTC'
             e.date = util.parsedate(d, ['%y/%m/%d %H:%M:%S',
                                         '%Y/%m/%d %H:%M:%S',
                                         '%Y-%m-%d %H:%M:%S'])
             e.author = scache(match.group(2))
             e.dead = match.group(3).lower() == 'dead'
 
             if match.group(5):
                 if match.group(6):
                     e.lines = (int(match.group(5)), int(match.group(6)))
                 else:
                     e.lines = (int(match.group(5)), 0)
             elif match.group(6):
                 e.lines = (0, int(match.group(6)))
             else:
                 e.lines = None
 
             if match.group(7): # cvsnt mergepoint
                 myrev = match.group(8).split('.')
                 if len(myrev) == 2: # head
                     e.mergepoint = 'HEAD'
                 else:
                     myrev = '.'.join(myrev[:-2] + ['0', myrev[-2]])
                     branches = [b for b in branchmap if branchmap[b] == myrev]
                     assert len(branches) == 1, 'unknown branch: %s' % e.mergepoint
                     e.mergepoint = branches[0]
             else:
                 e.mergepoint = None
             e.comment = []
             state = 7
 
         elif state == 7:
             # read the revision numbers of branches that start at this revision
             # or store the commit log message otherwise
             m = re_70.match(line)
             if m:
                 e.branches = [tuple([int(y) for y in x.strip().split('.')])
                                 for x in m.group(1).split(';')]
                 state = 8
             elif re_31.match(line) and re_50.match(peek):
                 state = 5
                 store = True
             elif re_32.match(line):
                 state = 0
                 store = True
             else:
                 e.comment.append(line)
 
         elif state == 8:
             # store commit log message
             if re_31.match(line):
                 state = 5
                 store = True
             elif re_32.match(line):
                 state = 0
                 store = True
             else:
                 e.comment.append(line)
 
         # When a file is added on a branch B1, CVS creates a synthetic
         # dead trunk revision 1.1 so that the branch has a root.
         # Likewise, if you merge such a file to a later branch B2 (one
         # that already existed when the file was added on B1), CVS
         # creates a synthetic dead revision 1.1.x.1 on B2.  Don't drop
         # these revisions now, but mark them synthetic so
         # createchangeset() can take care of them.
         if (store and
               e.dead and
               e.revision[-1] == 1 and      # 1.1 or 1.1.x.1
               len(e.comment) == 1 and
               file_added_re.match(e.comment[0])):
             ui.debug(_('found synthetic revision in %s: %r\n')
                      % (e.rcs, e.comment[0]))
             e.synthetic = True
 
         if store:
             # clean up the results and save in the log.
             store = False
             e.tags = sorted([scache(x) for x in tags.get(e.revision, [])])
             e.comment = scache('\n'.join(e.comment))
 
             revn = len(e.revision)
             if revn > 3 and (revn % 2) == 0:
                 e.branch = tags.get(e.revision[:-1], [None])[0]
             else:
                 e.branch = None
 
             # find the branches starting from this revision
             branchpoints = set()
             for branch, revision in branchmap.iteritems():
                 revparts = tuple([int(i) for i in revision.split('.')])
                 if revparts[-2] == 0 and revparts[-1] % 2 == 0:
                     # normal branch
                     if revparts[:-2] == e.revision:
                         branchpoints.add(branch)
                 elif revparts == (1,1,1): # vendor branch
                     if revparts in e.branches:
                         branchpoints.add(branch)
             e.branchpoints = branchpoints
 
             log.append(e)
 
             if len(log) % 100 == 0:
                 ui.status(util.ellipsis('%d %s' % (len(log), e.file), 80)+'\n')
 
     listsort(log, key=lambda x:(x.rcs, x.revision))
 
     # find parent revisions of individual files
     versions = {}
     for e in log:
         branch = e.revision[:-1]
         p = versions.get((e.rcs, branch), None)
         if p is None:
             p = e.revision[:-2]
         e.parent = p
         versions[(e.rcs, branch)] = e.revision
 
     # update the log cache
     if cache:
         if log:
             # join up the old and new logs
             listsort(log, key=lambda x:x.date)
 
             if oldlog and oldlog[-1].date >= log[0].date:
                 raise logerror('Log cache overlaps with new log entries,'
                                ' re-run without cache.')
 
             log = oldlog + log
 
             # write the new cachefile
             ui.note(_('writing cvs log cache %s\n') % cachefile)
             pickle.dump(log, file(cachefile, 'w'))
         else:
             log = oldlog
 
     ui.status(_('%d log entries\n') % len(log))
 
     return log
 
 
 class changeset(object):
     '''Class changeset has the following attributes:
         .id        - integer identifying this changeset (list index)
         .author    - author name as CVS knows it
         .branch    - name of branch this changeset is on, or None
         .comment   - commit message
         .date      - the commit date as a (time,tz) tuple
         .entries   - list of logentry objects in this changeset
         .parents   - list of one or two parent changesets
         .tags      - list of tags on this changeset
         .synthetic - from synthetic revision "file ... added on branch ..."
         .mergepoint- the branch that has been merged from
                      (if present in rlog output)
         .branchpoints- the branches that start at the current entry
     '''
     def __init__(self, **entries):
         self.__dict__.update(entries)
 
     def __repr__(self):
         return "<%s at 0x%x: %s>" % (self.__class__.__name__,
                                      id(self),
                                      getattr(self, 'id', "(no id)"))
 
 def createchangeset(ui, log, fuzz=60, mergefrom=None, mergeto=None):
     '''Convert log into changesets.'''
 
     ui.status(_('creating changesets\n'))
 
     # Merge changesets
 
     listsort(log, key=lambda x:(x.comment, x.author, x.branch, x.date))
 
     changesets = []
     files = set()
     c = None
     for i, e in enumerate(log):
 
         # Check if log entry belongs to the current changeset or not.
 
         # Since CVS is file centric, two different file revisions with
         # different branchpoints should be treated as belonging to two
         # different changesets (and the ordering is important and not
         # honoured by cvsps at this point).
         #
         # Consider the following case:
         # foo 1.1 branchpoints: [MYBRANCH]
         # bar 1.1 branchpoints: [MYBRANCH, MYBRANCH2]
         #
         # Here foo is part only of MYBRANCH, but not MYBRANCH2, e.g. a
         # later version of foo may be in MYBRANCH2, so foo should be the
         # first changeset and bar the next and MYBRANCH and MYBRANCH2
         # should both start off of the bar changeset. No provisions are
         # made to ensure that this is, in fact, what happens.
         if not (c and
                   e.comment == c.comment and
                   e.author == c.author and
                   e.branch == c.branch and
-                  e.branchpoints == c.branchpoints and
+                  (not hasattr(e, 'branchpoints') or
+                    not hasattr (c, 'branchpoints') or
+                    e.branchpoints == c.branchpoints) and
                   ((c.date[0] + c.date[1]) <=
                    (e.date[0] + e.date[1]) <=
                    (c.date[0] + c.date[1]) + fuzz) and
                   e.file not in files):
             c = changeset(comment=e.comment, author=e.author,
                           branch=e.branch, date=e.date, entries=[],
                           mergepoint=getattr(e, 'mergepoint', None),
                           branchpoints=getattr(e, 'branchpoints', set()))
             changesets.append(c)
             files = set()
             if len(changesets) % 100 == 0:
                 t = '%d %s' % (len(changesets), repr(e.comment)[1:-1])
                 ui.status(util.ellipsis(t, 80) + '\n')
 
         c.entries.append(e)
         files.add(e.file)
         c.date = e.date       # changeset date is date of latest commit in it
 
     # Mark synthetic changesets
 
     for c in changesets:
         # Synthetic revisions always get their own changeset, because
         # the log message includes the filename.  E.g. if you add file3
         # and file4 on a branch, you get four log entries and three
         # changesets:
         #   "File file3 was added on branch ..." (synthetic, 1 entry)
         #   "File file4 was added on branch ..." (synthetic, 1 entry)
         #   "Add file3 and file4 to fix ..."     (real, 2 entries)
         # Hence the check for 1 entry here.
         synth = getattr(c.entries[0], 'synthetic', None)
         c.synthetic = (len(c.entries) == 1 and synth)
 
     # Sort files in each changeset
 
     for c in changesets:
         def pathcompare(l, r):
             'Mimic cvsps sorting order'
             l = l.split('/')
             r = r.split('/')
             nl = len(l)
             nr = len(r)
             n = min(nl, nr)
             for i in range(n):
                 if i + 1 == nl and nl < nr:
                     return -1
                 elif i + 1 == nr and nl > nr:
                     return +1
                 elif l[i] < r[i]:
                     return -1
                 elif l[i] > r[i]:
                     return +1
             return 0
         def entitycompare(l, r):
             return pathcompare(l.file, r.file)
 
         c.entries.sort(entitycompare)
 
     # Sort changesets by date
 
     def cscmp(l, r):
         d = sum(l.date) - sum(r.date)
         if d:
             return d
 
         # detect vendor branches and initial commits on a branch
         le = {}
         for e in l.entries:
             le[e.rcs] = e.revision
         re = {}
         for e in r.entries:
             re[e.rcs] = e.revision
 
         d = 0
         for e in l.entries:
             if re.get(e.rcs, None) == e.parent:
                 assert not d
                 d = 1
                 break
 
         for e in r.entries:
             if le.get(e.rcs, None) == e.parent:
                 assert not d
                 d = -1
                 break
 
         return d
 
     changesets.sort(cscmp)
 
     # Collect tags
 
     globaltags = {}
     for c in changesets:
         for e in c.entries:
             for tag in e.tags:
                 # remember which is the latest changeset to have this tag
                 globaltags[tag] = c
 
     for c in changesets:
         tags = set()
         for e in c.entries:
             tags.update(e.tags)
         # remember tags only if this is the latest changeset to have it
         c.tags = sorted(tag for tag in tags if globaltags[tag] is c)
 
     # Find parent changesets, handle {{mergetobranch BRANCHNAME}}
     # by inserting dummy changesets with two parents, and handle
     # {{mergefrombranch BRANCHNAME}} by setting two parents.
 
     if mergeto is None:
         mergeto = r'{{mergetobranch ([-\w]+)}}'
     if mergeto:
         mergeto = re.compile(mergeto)
 
     if mergefrom is None:
         mergefrom = r'{{mergefrombranch ([-\w]+)}}'
     if mergefrom:
         mergefrom = re.compile(mergefrom)
 
     versions = {}    # changeset index where we saw any particular file version
     branches = {}    # changeset index where we saw a branch
     n = len(changesets)
     i = 0
     while i<n:
         c = changesets[i]
 
         for f in c.entries:
             versions[(f.rcs, f.revision)] = i
 
         p = None
         if c.branch in branches:
             p = branches[c.branch]
         else:
             # first changeset on a new branch
             # the parent is a changeset with the branch in its
             # branchpoints such that it is the latest possible
             # commit without any intervening, unrelated commits.
 
             for candidate in xrange(i):
                 if c.branch not in changesets[candidate].branchpoints:
                     if p is not None:
                         break
                     continue
                 p = candidate
 
         c.parents = []
         if p is not None:
             p = changesets[p]
 
             # Ensure no changeset has a synthetic changeset as a parent.
             while p.synthetic:
                 assert len(p.parents) <= 1, \
                        _('synthetic changeset cannot have multiple parents')
                 if p.parents:
                     p = p.parents[0]
                 else:
                     p = None
                     break
 
             if p is not None:
                 c.parents.append(p)
 
         if c.mergepoint:
             if c.mergepoint == 'HEAD':
                 c.mergepoint = None
             c.parents.append(changesets[branches[c.mergepoint]])
 
         if mergefrom:
             m = mergefrom.search(c.comment)
             if m:
                 m = m.group(1)
                 if m == 'HEAD':
                     m = None
                 try:
                     candidate = changesets[branches[m]]
                 except KeyError:
                     ui.warn(_("warning: CVS commit message references "
                               "non-existent branch %r:\n%s\n")
                             % (m, c.comment))
                 if m in branches and c.branch != m and not candidate.synthetic:
                     c.parents.append(candidate)
 
         if mergeto:
             m = mergeto.search(c.comment)
             if m:
                 try:
                     m = m.group(1)
                     if m == 'HEAD':
                         m = None
                 except:
                     m = None   # if no group found then merge to HEAD
                 if m in branches and c.branch != m:
                     # insert empty changeset for merge
                     cc = changeset(author=c.author, branch=m, date=c.date,
                             comment='convert-repo: CVS merge from branch %s' % c.branch,
                             entries=[], tags=[], parents=[changesets[branches[m]], c])
                     changesets.insert(i + 1, cc)
                     branches[m] = i + 1
 
                     # adjust our loop counters now we have inserted a new entry
                     n += 1
                     i += 2
                     continue
 
         branches[c.branch] = i
         i += 1
 
     # Drop synthetic changesets (safe now that we have ensured no other
     # changesets can have them as parents).
     i = 0
     while i < len(changesets):
         if changesets[i].synthetic:
             del changesets[i]
         else:
             i += 1
 
     # Number changesets
 
     for i, c in enumerate(changesets):
         c.id = i + 1
 
     ui.status(_('%d changeset entries\n') % len(changesets))
 
     return changesets
 
 
 def debugcvsps(ui, *args, **opts):
     '''Read CVS rlog for current directory or named path in
     repository, and convert the log to changesets based on matching
     commit log entries and dates.
     '''
     if opts["new_cache"]:
         cache = "write"
     elif opts["update_cache"]:
         cache = "update"
     else:
         cache = None
 
     revisions = opts["revisions"]
 
     try:
         if args:
             log = []
             for d in args:
                 log += createlog(ui, d, root=opts["root"], cache=cache)
         else:
             log = createlog(ui, root=opts["root"], cache=cache)
     except logerror, e:
         ui.write("%r\n"%e)
         return
 
     changesets = createchangeset(ui, log, opts["fuzz"])
     del log
 
     # Print changesets (optionally filtered)
 
     off = len(revisions)
     branches = {}    # latest version number in each branch
     ancestors = {}   # parent branch
     for cs in changesets:
 
         if opts["ancestors"]:
             if cs.branch not in branches and cs.parents and cs.parents[0].id:
                 ancestors[cs.branch] = (changesets[cs.parents[0].id-1].branch,
                                         cs.parents[0].id)
             branches[cs.branch] = cs.id
 
         # limit by branches
         if opts["branches"] and (cs.branch or 'HEAD') not in opts["branches"]:
             continue
 
         if not off:
             # Note: trailing spaces on several lines here are needed to have
             #       bug-for-bug compatibility with cvsps.
             ui.write('---------------------\n')
             ui.write('PatchSet %d \n' % cs.id)
             ui.write('Date: %s\n' % util.datestr(cs.date,
                                                  '%Y/%m/%d %H:%M:%S %1%2'))
             ui.write('Author: %s\n' % cs.author)
             ui.write('Branch: %s\n' % (cs.branch or 'HEAD'))
             ui.write('Tag%s: %s \n' % (['', 's'][len(cs.tags)>1],
                                   ','.join(cs.tags) or '(none)'))
             branchpoints = getattr(cs, 'branchpoints', None)
             if branchpoints:
                 ui.write('Branchpoints: %s \n' % ', '.join(branchpoints))
             if opts["parents"] and cs.parents:
                 if len(cs.parents)>1:
                     ui.write('Parents: %s\n' % (','.join([str(p.id) for p in cs.parents])))
                 else:
                     ui.write('Parent: %d\n' % cs.parents[0].id)
 
             if opts["ancestors"]:
                 b = cs.branch
                 r = []
                 while b:
                     b, c = ancestors[b]
                     r.append('%s:%d:%d' % (b or "HEAD", c, branches[b]))
                 if r:
                     ui.write('Ancestors: %s\n' % (','.join(r)))
 
             ui.write('Log:\n')
             ui.write('%s\n\n' % cs.comment)
             ui.write('Members: \n')
             for f in cs.entries:
                 fn = f.file
                 if fn.startswith(opts["prefix"]):
                     fn = fn[len(opts["prefix"]):]
                 ui.write('\t%s:%s->%s%s \n' % (fn, '.'.join([str(x) for x in f.parent]) or 'INITIAL',
                                           '.'.join([str(x) for x in f.revision]), ['', '(DEAD)'][f.dead]))
             ui.write('\n')
 
         # have we seen the start tag?
         if revisions and off:
             if revisions[0] == str(cs.id) or \
                 revisions[0] in cs.tags:
                 off = False
 
         # see if we reached the end tag
         if len(revisions)>1 and not off:
             if revisions[1] == str(cs.id) or \
                 revisions[1] in cs.tags:
                 break

hgext/convert/subversion.py

@@ -1,1242 +1,1136 b''
 # Subversion 1.4/1.5 Python API backend
 #
 # Copyright(C) 2007 Daniel Holth et al
-#
-# Configuration options:
-#
-# convert.svn.trunk
-#   Relative path to the trunk (default: "trunk")
-# convert.svn.branches
-#   Relative path to tree of branches (default: "branches")
-# convert.svn.tags
-#   Relative path to tree of tags (default: "tags")
-#
-# Set these in a hgrc, or on the command line as follows:
-#
-#   hg convert --config convert.svn.trunk=wackoname [...]
 
 import locale
 import os
 import re
 import sys
 import cPickle as pickle
 import tempfile
 import urllib
 
-from mercurial import strutil, util
+from mercurial import strutil, util, encoding
 from mercurial.i18n import _
 
 # Subversion stuff. Works best with very recent Python SVN bindings
 # e.g. SVN 1.5 or backports. Thanks to the bzr folks for enhancing
 # these bindings.
 
 from cStringIO import StringIO
 
 from common import NoRepo, MissingTool, commit, encodeargs, decodeargs
 from common import commandline, converter_source, converter_sink, mapfile
 
 try:
     from svn.core import SubversionException, Pool
     import svn
     import svn.client
     import svn.core
     import svn.ra
     import svn.delta
     import transport
     import warnings
     warnings.filterwarnings('ignore',
             module='svn.core',
             category=DeprecationWarning)
 
 except ImportError:
     pass
 
 class SvnPathNotFound(Exception):
     pass
 
 def geturl(path):
     try:
         return svn.client.url_from_path(svn.core.svn_path_canonicalize(path))
     except SubversionException:
         pass
     if os.path.isdir(path):
         path = os.path.normpath(os.path.abspath(path))
         if os.name == 'nt':
             path = '/' + util.normpath(path)
+        # Module URL is later compared with the repository URL returned
+        # by svn API, which is UTF-8.
+        path = encoding.tolocal(path)
         return 'file://%s' % urllib.quote(path)
     return path
 
 def optrev(number):
     optrev = svn.core.svn_opt_revision_t()
     optrev.kind = svn.core.svn_opt_revision_number
     optrev.value.number = number
     return optrev
 
 class changedpath(object):
     def __init__(self, p):
         self.copyfrom_path = p.copyfrom_path
         self.copyfrom_rev = p.copyfrom_rev
         self.action = p.action
 
 def get_log_child(fp, url, paths, start, end, limit=0, discover_changed_paths=True,
                     strict_node_history=False):
     protocol = -1
     def receiver(orig_paths, revnum, author, date, message, pool):
         if orig_paths is not None:
             for k, v in orig_paths.iteritems():
                 orig_paths[k] = changedpath(v)
         pickle.dump((orig_paths, revnum, author, date, message),
                     fp, protocol)
 
     try:
         # Use an ra of our own so that our parent can consume
         # our results without confusing the server.
         t = transport.SvnRaTransport(url=url)
         svn.ra.get_log(t.ra, paths, start, end, limit,
                        discover_changed_paths,
                        strict_node_history,
                        receiver)
     except SubversionException, (inst, num):
         pickle.dump(num, fp, protocol)
     except IOError:
         # Caller may interrupt the iteration
         pickle.dump(None, fp, protocol)
     else:
         pickle.dump(None, fp, protocol)
     fp.close()
     # With large history, cleanup process goes crazy and suddenly
     # consumes *huge* amount of memory. The output file being closed,
     # there is no need for clean termination.
     os._exit(0)
 
 def debugsvnlog(ui, **opts):
     """Fetch SVN log in a subprocess and channel them back to parent to
     avoid memory collection issues.
     """
     util.set_binary(sys.stdin)
     util.set_binary(sys.stdout)
     args = decodeargs(sys.stdin.read())
     get_log_child(sys.stdout, *args)
 
 class logstream(object):
     """Interruptible revision log iterator."""
     def __init__(self, stdout):
         self._stdout = stdout
 
     def __iter__(self):
         while True:
             entry = pickle.load(self._stdout)
             try:
                 orig_paths, revnum, author, date, message = entry
             except:
                 if entry is None:
                     break
                 raise SubversionException("child raised exception", entry)
             yield entry
 
     def close(self):
         if self._stdout:
             self._stdout.close()
             self._stdout = None
 
 
 # Check to see if the given path is a local Subversion repo. Verify this by
 # looking for several svn-specific files and directories in the given
 # directory.
 def filecheck(path, proto):
     for x in ('locks', 'hooks', 'format', 'db', ):
         if not os.path.exists(os.path.join(path, x)):
             return False
     return True
 
 # Check to see if a given path is the root of an svn repo over http. We verify
 # this by requesting a version-controlled URL we know can't exist and looking
 # for the svn-specific "not found" XML.
 def httpcheck(path, proto):
     return ('<m:human-readable errcode="160013">' in
             urllib.urlopen('%s://%s/!svn/ver/0/.svn' % (proto, path)).read())
 
 protomap = {'http': httpcheck,
             'https': httpcheck,
             'file': filecheck,
             }
 def issvnurl(url):
     try:
         proto, path = url.split('://', 1)
         path = urllib.url2pathname(path)
     except ValueError:
         proto = 'file'
         path = os.path.abspath(url)
     path = path.replace(os.sep, '/')
     check = protomap.get(proto, lambda p, p2: False)
     while '/' in path:
         if check(path, proto):
             return True
         path = path.rsplit('/', 1)[0]
     return False
 
 # SVN conversion code stolen from bzr-svn and tailor
 #
 # Subversion looks like a versioned filesystem, branches structures
 # are defined by conventions and not enforced by the tool. First,
 # we define the potential branches (modules) as "trunk" and "branches"
 # children directories. Revisions are then identified by their
 # module and revision number (and a repository identifier).
 #
 # The revision graph is really a tree (or a forest). By default, a
 # revision parent is the previous revision in the same module. If the
 # module directory is copied/moved from another module then the
 # revision is the module root and its parent the source revision in
 # the parent module. A revision has at most one parent.
 #
 class svn_source(converter_source):
     def __init__(self, ui, url, rev=None):
         super(svn_source, self).__init__(ui, url, rev=rev)
 
         if not (url.startswith('svn://') or url.startswith('svn+ssh://') or
                 (os.path.exists(url) and
                  os.path.exists(os.path.join(url, '.svn'))) or
                 issvnurl(url)):
             raise NoRepo("%s does not look like a Subversion repo" % url)
 
         try:
             SubversionException
         except NameError:
             raise MissingTool(_('Subversion python bindings could not be loaded'))
 
         try:
             version = svn.core.SVN_VER_MAJOR, svn.core.SVN_VER_MINOR
             if version < (1, 4):
                 raise MissingTool(_('Subversion python bindings %d.%d found, '
                                     '1.4 or later required') % version)
         except AttributeError:
             raise MissingTool(_('Subversion python bindings are too old, 1.4 '
                                 'or later required'))
 
-        self.encoding = locale.getpreferredencoding()
         self.lastrevs = {}
 
         latest = None
         try:
             # Support file://path@rev syntax. Useful e.g. to convert
             # deleted branches.
             at = url.rfind('@')
             if at >= 0:
                 latest = int(url[at+1:])
                 url = url[:at]
         except ValueError:
             pass
         self.url = geturl(url)
         self.encoding = 'UTF-8' # Subversion is always nominal UTF-8
         try:
             self.transport = transport.SvnRaTransport(url=self.url)
             self.ra = self.transport.ra
             self.ctx = self.transport.client
             self.baseurl = svn.ra.get_repos_root(self.ra)
             # Module is either empty or a repository path starting with
             # a slash and not ending with a slash.
             self.module = urllib.unquote(self.url[len(self.baseurl):])
             self.prevmodule = None
             self.rootmodule = self.module
             self.commits = {}
             self.paths = {}
-            self.uuid = svn.ra.get_uuid(self.ra).decode(self.encoding)
+            self.uuid = svn.ra.get_uuid(self.ra)
         except SubversionException:
             ui.traceback()
             raise NoRepo("%s does not look like a Subversion repo" % self.url)
 
         if rev:
             try:
                 latest = int(rev)
             except ValueError:
                 raise util.Abort(_('svn: revision %s is not an integer') % rev)
 
         self.startrev = self.ui.config('convert', 'svn.startrev', default=0)
         try:
             self.startrev = int(self.startrev)
             if self.startrev < 0:
                 self.startrev = 0
         except ValueError:
             raise util.Abort(_('svn: start revision %s is not an integer')
                              % self.startrev)
 
-        try:
-            self.get_blacklist()
-        except IOError:
-            pass
-
         self.head = self.latest(self.module, latest)
         if not self.head:
-            raise util.Abort(_('no revision found in module %s') %
-                             self.module.encode(self.encoding))
+            raise util.Abort(_('no revision found in module %s')
+                             % self.module)
         self.last_changed = self.revnum(self.head)
 
         self._changescache = None
 
         if os.path.exists(os.path.join(url, '.svn/entries')):
             self.wc = url
         else:
             self.wc = None
         self.convertfp = None
 
     def setrevmap(self, revmap):
         lastrevs = {}
         for revid in revmap.iterkeys():
             uuid, module, revnum = self.revsplit(revid)
             lastrevnum = lastrevs.setdefault(module, revnum)
             if revnum > lastrevnum:
                 lastrevs[module] = revnum
         self.lastrevs = lastrevs
 
     def exists(self, path, optrev):
         try:
             svn.client.ls(self.url.rstrip('/') + '/' + urllib.quote(path),
                                  optrev, False, self.ctx)
             return True
         except SubversionException:
             return False
 
     def getheads(self):
 
         def isdir(path, revnum):
             kind = self._checkpath(path, revnum)
             return kind == svn.core.svn_node_dir
 
         def getcfgpath(name, rev):
             cfgpath = self.ui.config('convert', 'svn.' + name)
             if cfgpath is not None and cfgpath.strip() == '':
                 return None
             path = (cfgpath or name).strip('/')
             if not self.exists(path, rev):
                 if cfgpath:
                     raise util.Abort(_('expected %s to be at %r, but not found')
                                  % (name, path))
                 return None
             self.ui.note(_('found %s at %r\n') % (name, path))
             return path
 
         rev = optrev(self.last_changed)
         oldmodule = ''
         trunk = getcfgpath('trunk', rev)
         self.tags = getcfgpath('tags', rev)
         branches = getcfgpath('branches', rev)
 
         # If the project has a trunk or branches, we will extract heads
         # from them. We keep the project root otherwise.
         if trunk:
             oldmodule = self.module or ''
             self.module += '/' + trunk
             self.head = self.latest(self.module, self.last_changed)
             if not self.head:
-                raise util.Abort(_('no revision found in module %s') %
-                                 self.module.encode(self.encoding))
+                raise util.Abort(_('no revision found in module %s') 
+                                 % self.module)
 
         # First head in the list is the module's head
         self.heads = [self.head]
         if self.tags is not None:
             self.tags = '%s/%s' % (oldmodule , (self.tags or 'tags'))
 
         # Check if branches bring a few more heads to the list
         if branches:
             rpath = self.url.strip('/')
             branchnames = svn.client.ls(rpath + '/' + urllib.quote(branches),
                                         rev, False, self.ctx)
             for branch in branchnames.keys():
                 module = '%s/%s/%s' % (oldmodule, branches, branch)
                 if not isdir(module, self.last_changed):
                     continue
                 brevid = self.latest(module, self.last_changed)
                 if not brevid:
-                    self.ui.note(_('ignoring empty branch %s\n') %
-                                   branch.encode(self.encoding))
+                    self.ui.note(_('ignoring empty branch %s\n') % branch)
                     continue
                 self.ui.note(_('found branch %s at %d\n') %
                              (branch, self.revnum(brevid)))
                 self.heads.append(brevid)
 
         if self.startrev and self.heads:
             if len(self.heads) > 1:
                 raise util.Abort(_('svn: start revision is not supported '
                                    'with more than one branch'))
             revnum = self.revnum(self.heads[0])
             if revnum < self.startrev:
                 raise util.Abort(_('svn: no revision found after start revision %d')
                                  % self.startrev)
 
         return self.heads
 
     def getfile(self, file, rev):
         data, mode = self._getfile(file, rev)
         self.modecache[(file, rev)] = mode
         return data
 
     def getmode(self, file, rev):
         return self.modecache[(file, rev)]
 
     def getchanges(self, rev):
         if self._changescache and self._changescache[0] == rev:
             return self._changescache[1]
         self._changescache = None
         self.modecache = {}
         (paths, parents) = self.paths[rev]
         if parents:
             files, copies = self.expandpaths(rev, paths, parents)
         else:
             # Perform a full checkout on roots
             uuid, module, revnum = self.revsplit(rev)
             entries = svn.client.ls(self.baseurl + urllib.quote(module),
                                     optrev(revnum), True, self.ctx)
             files = [n for n,e in entries.iteritems()
                      if e.kind == svn.core.svn_node_file]
             copies = {}
 
         files.sort()
         files = zip(files, [rev] * len(files))
 
         # caller caches the result, so free it here to release memory
         del self.paths[rev]
         return (files, copies)
 
     def getchangedfiles(self, rev, i):
         changes = self.getchanges(rev)
         self._changescache = (rev, changes)
         return [f[0] for f in changes[0]]
 
     def getcommit(self, rev):
         if rev not in self.commits:
             uuid, module, revnum = self.revsplit(rev)
             self.module = module
             self.reparent(module)
             # We assume that:
             # - requests for revisions after "stop" come from the
             # revision graph backward traversal. Cache all of them
             # down to stop, they will be used eventually.
             # - requests for revisions before "stop" come to get
             # isolated branches parents. Just fetch what is needed.
             stop = self.lastrevs.get(module, 0)
             if revnum < stop:
                 stop = revnum + 1
             self._fetch_revisions(revnum, stop)
         commit = self.commits[rev]
         # caller caches the result, so free it here to release memory
         del self.commits[rev]
         return commit
 
     def gettags(self):
         tags = {}
         if self.tags is None:
             return tags
 
         # svn tags are just a convention, project branches left in a
         # 'tags' directory. There is no other relationship than
         # ancestry, which is expensive to discover and makes them hard
         # to update incrementally.  Worse, past revisions may be
         # referenced by tags far away in the future, requiring a deep
         # history traversal on every calculation.  Current code
         # performs a single backward traversal, tracking moves within
         # the tags directory (tag renaming) and recording a new tag
         # everytime a project is copied from outside the tags
         # directory. It also lists deleted tags, this behaviour may
         # change in the future.
         pendings = []
         tagspath = self.tags
         start = svn.ra.get_latest_revnum(self.ra)
         try:
             for entry in self._getlog([self.tags], start, self.startrev):
                 origpaths, revnum, author, date, message = entry
                 copies = [(e.copyfrom_path, e.copyfrom_rev, p) for p, e
                           in origpaths.iteritems() if e.copyfrom_path]
                 # Apply moves/copies from more specific to general
                 copies.sort(reverse=True)
 
                 srctagspath = tagspath
                 if copies and copies[-1][2] == tagspath:
                     # Track tags directory moves
                     srctagspath = copies.pop()[0]
 
                 for source, sourcerev, dest in copies:
                     if not dest.startswith(tagspath + '/'):
                         continue
                     for tag in pendings:
                         if tag[0].startswith(dest):
                             tagpath = source + tag[0][len(dest):]
                             tag[:2] = [tagpath, sourcerev]
                             break
                     else:
                         pendings.append([source, sourcerev, dest])
 
                 # Filter out tags with children coming from different
                 # parts of the repository like:
                 # /tags/tag.1 (from /trunk:10)
                 # /tags/tag.1/foo (from /branches/foo:12)
                 # Here/tags/tag.1 discarded as well as its children.
                 # It happens with tools like cvs2svn. Such tags cannot
                 # be represented in mercurial.
                 addeds = dict((p, e.copyfrom_path) for p, e
                               in origpaths.iteritems() if e.action == 'A')
                 badroots = set()
                 for destroot in addeds:
                     for source, sourcerev, dest in pendings:
                         if (not dest.startswith(destroot + '/')
                             or source.startswith(addeds[destroot] + '/')):
                             continue
                         badroots.add(destroot)
                         break
 
                 for badroot in badroots:
                     pendings = [p for p in pendings if p[2] != badroot
                                 and not p[2].startswith(badroot + '/')]
 
                 # Tell tag renamings from tag creations
                 remainings = []
                 for source, sourcerev, dest in pendings:
                     tagname = dest.split('/')[-1]
                     if source.startswith(srctagspath):
                         remainings.append([source, sourcerev, tagname])
                         continue
                     if tagname in tags:
                         # Keep the latest tag value
                         continue
                     # From revision may be fake, get one with changes
                     try:
                         tagid = self.latest(source, sourcerev)
                         if tagid and tagname not in tags:
                             tags[tagname] = tagid
                     except SvnPathNotFound:
                         # It happens when we are following directories
                         # we assumed were copied with their parents
                         # but were really created in the tag
                         # directory.
                         pass
                 pendings = remainings
                 tagspath = srctagspath
 
         except SubversionException:
             self.ui.note(_('no tags found at revision %d\n') % start)
         return tags
 
     def converted(self, rev, destrev):
         if not self.wc:
             return
         if self.convertfp is None:
             self.convertfp = open(os.path.join(self.wc, '.svn', 'hg-shamap'),
                                   'a')
         self.convertfp.write('%s %d\n' % (destrev, self.revnum(rev)))
         self.convertfp.flush()
 
-    # -- helper functions --
-
     def revid(self, revnum, module=None):
-        if not module:
-            module = self.module
-        return u"svn:%s%s@%s" % (self.uuid, module.decode(self.encoding),
-                                 revnum)
+        return 'svn:%s%s@%s' % (self.uuid, module or self.module, revnum)
 
     def revnum(self, rev):
         return int(rev.split('@')[-1])
 
     def revsplit(self, rev):
-        url, revnum = rev.encode(self.encoding).rsplit('@', 1)
+        url, revnum = rev.rsplit('@', 1)
         revnum = int(revnum)
         parts = url.split('/', 1)
         uuid = parts.pop(0)[4:]
         mod = ''
         if parts:
             mod = '/' + parts[0]
         return uuid, mod, revnum
 
     def latest(self, path, stop=0):
         """Find the latest revid affecting path, up to stop. It may return
         a revision in a different module, since a branch may be moved without
         a change being reported. Return None if computed module does not
         belong to rootmodule subtree.
         """
         if not path.startswith(self.rootmodule):
             # Requests on foreign branches may be forbidden at server level
             self.ui.debug(_('ignoring foreign branch %r\n') % path)
             return None
 
         if not stop:
             stop = svn.ra.get_latest_revnum(self.ra)
         try:
             prevmodule = self.reparent('')
             dirent = svn.ra.stat(self.ra, path.strip('/'), stop)
             self.reparent(prevmodule)
         except SubversionException:
             dirent = None
         if not dirent:
             raise SvnPathNotFound(_('%s not found up to revision %d') % (path, stop))
 
         # stat() gives us the previous revision on this line of
         # development, but it might be in *another module*. Fetch the
         # log and detect renames down to the latest revision.
         stream = self._getlog([path], stop, dirent.created_rev)
         try:
             for entry in stream:
                 paths, revnum, author, date, message = entry
                 if revnum <= dirent.created_rev:
                     break
 
                 for p in paths:
                     if not path.startswith(p) or not paths[p].copyfrom_path:
                         continue
                     newpath = paths[p].copyfrom_path + path[len(p):]
                     self.ui.debug(_("branch renamed from %s to %s at %d\n") %
                                   (path, newpath, revnum))
                     path = newpath
                     break
         finally:
             stream.close()
 
         if not path.startswith(self.rootmodule):
             self.ui.debug(_('ignoring foreign branch %r\n') % path)
             return None
         return self.revid(dirent.created_rev, path)
 
-    def get_blacklist(self):
-        """Avoid certain revision numbers.
-        It is not uncommon for two nearby revisions to cancel each other
-        out, e.g. 'I copied trunk into a subdirectory of itself instead
-        of making a branch'. The converted repository is significantly
-        smaller if we ignore such revisions."""
-        self.blacklist = set()
-        blacklist = self.blacklist
-        for line in file("blacklist.txt", "r"):
-            if not line.startswith("#"):
-                try:
-                    svn_rev = int(line.strip())
-                    blacklist.add(svn_rev)
-                except ValueError:
-                    pass # not an integer or a comment
-
-    def is_blacklisted(self, svn_rev):
-        return svn_rev in self.blacklist
-
     def reparent(self, module):
         """Reparent the svn transport and return the previous parent."""
         if self.prevmodule == module:
             return module
         svnurl = self.baseurl + urllib.quote(module)
         prevmodule = self.prevmodule
         if prevmodule is None:
             prevmodule = ''
         self.ui.debug(_("reparent to %s\n") % svnurl)
         svn.ra.reparent(self.ra, svnurl)
         self.prevmodule = module
         return prevmodule
 
     def expandpaths(self, rev, paths, parents):
         entries = []
         # Map of entrypath, revision for finding source of deleted
         # revisions.
         copyfrom = {}
         copies = {}
 
         new_module, revnum = self.revsplit(rev)[1:]
         if new_module != self.module:
             self.module = new_module
             self.reparent(self.module)
 
         for path, ent in paths:
             entrypath = self.getrelpath(path)
-            entry = entrypath.decode(self.encoding)
 
             kind = self._checkpath(entrypath, revnum)
             if kind == svn.core.svn_node_file:
-                entries.append(self.recode(entry))
+                entries.append(self.recode(entrypath))
                 if not ent.copyfrom_path or not parents:
                     continue
                 # Copy sources not in parent revisions cannot be
                 # represented, ignore their origin for now
                 pmodule, prevnum = self.revsplit(parents[0])[1:]
                 if ent.copyfrom_rev < prevnum:
                     continue
                 copyfrom_path = self.getrelpath(ent.copyfrom_path, pmodule)
                 if not copyfrom_path:
                     continue
                 self.ui.debug(_("copied to %s from %s@%s\n") %
                               (entrypath, copyfrom_path, ent.copyfrom_rev))
-                copies[self.recode(entry)] = self.recode(copyfrom_path)
+                copies[self.recode(entrypath)] = self.recode(copyfrom_path)
             elif kind == 0: # gone, but had better be a deleted *file*
                 self.ui.debug(_("gone from %s\n") % ent.copyfrom_rev)
-
-                # if a branch is created but entries are removed in
-                # the same changeset, get the right fromrev
-                # parents cannot be empty here, you cannot remove
-                # things from a root revision.
-                uuid, old_module, fromrev = self.revsplit(parents[0])
-
-                basepath = old_module + "/" + self.getrelpath(path)
-                entrypath = basepath
-
-                def lookup_parts(p):
-                    rc = None
-                    parts = p.split("/")
-                    for i in range(len(parts)):
-                        part = "/".join(parts[:i])
-                        info = part, copyfrom.get(part, None)
-                        if info[1] is not None:
-                            self.ui.debug(_("found parent directory %s\n") % info[1])
-                            rc = info
-                    return rc
-
-                self.ui.debug(_("base, entry %s %s\n") % (basepath, entrypath))
-
-                frompath, froment = lookup_parts(entrypath) or (None, revnum - 1)
-
-                # need to remove fragment from lookup_parts and
-                # replace with copyfrom_path
-                if frompath is not None:
-                    self.ui.debug(_("munge-o-matic\n"))
-                    self.ui.debug(entrypath + '\n')
-                    self.ui.debug(entrypath[len(frompath):] + '\n')
-                    entrypath = froment.copyfrom_path + entrypath[len(frompath):]
-                    fromrev = froment.copyfrom_rev
-                    self.ui.debug(_("info: %s %s %s %s\n") % (frompath, froment, ent, entrypath))
+                pmodule, prevnum = self.revsplit(parents[0])[1:]
+                parentpath = pmodule + "/" + entrypath
+                self.ui.debug(_("entry %s\n") % parentpath)
 
                 # We can avoid the reparent calls if the module has
                 # not changed but it probably does not worth the pain.
                 prevmodule = self.reparent('')
-                fromkind = svn.ra.check_path(self.ra, entrypath.strip('/'), fromrev)
+                fromkind = svn.ra.check_path(self.ra, parentpath.strip('/'), prevnum)
                 self.reparent(prevmodule)
 
-                if fromkind == svn.core.svn_node_file:   # a deleted file
-                    entries.append(self.recode(entry))
+                if fromkind == svn.core.svn_node_file:
+                    entries.append(self.recode(entrypath))
                 elif fromkind == svn.core.svn_node_dir:
-                    # print "Deleted/moved non-file:", revnum, path, ent
-                    # children = self._find_children(path, revnum - 1)
-                    # print ("find children %s@%d from %d action %s" %
-                    #        (path, revnum, ent.copyfrom_rev, ent.action))
-                    # Sometimes this is tricky. For example: in
-                    # The Subversion Repository revision 6940 a dir
-                    # was copied and one of its files was deleted
-                    # from the new location in the same commit. This
-                    # code can't deal with that yet.
                     if ent.action == 'C':
-                        children = self._find_children(path, fromrev)
+                        children = self._find_children(path, prevnum)
                     else:
-                        oroot = entrypath.strip('/')
+                        oroot = parentpath.strip('/')
                         nroot = path.strip('/')
-                        children = self._find_children(oroot, fromrev)
+                        children = self._find_children(oroot, prevnum)
                         children = [s.replace(oroot,nroot) for s in children]
-                    # Mark all [files, not directories] as deleted.
+
                     for child in children:
-                        # Can we move a child directory and its
-                        # parent in the same commit? (probably can). Could
-                        # cause problems if instead of revnum -1,
-                        # we have to look in (copyfrom_path, revnum - 1)
-                        entrypath = self.getrelpath("/" + child, module=old_module)
-                        if entrypath:
-                            entry = self.recode(entrypath.decode(self.encoding))
-                            if entry in copies:
-                                # deleted file within a copy
-                                del copies[entry]
-                            else:
-                                entries.append(entry)
+                        childpath = self.getrelpath("/" + child, pmodule)
+                        if not childpath:
+                            continue
+                        if childpath in copies:
+                            del copies[childpath]
+                        entries.append(childpath)
                 else:
                     self.ui.debug(_('unknown path in revision %d: %s\n') % \
                                   (revnum, path))
             elif kind == svn.core.svn_node_dir:
-                # Should probably synthesize normal file entries
-                # and handle as above to clean up copy/rename handling.
-
                 # If the directory just had a prop change,
                 # then we shouldn't need to look for its children.
                 if ent.action == 'M':
                     continue
 
-                # Also this could create duplicate entries. Not sure
-                # whether this will matter. Maybe should make entries a set.
-                # print "Changed directory", revnum, path, ent.action, \
-                #     ent.copyfrom_path, ent.copyfrom_rev
-                # This will fail if a directory was copied
-                # from another branch and then some of its files
-                # were deleted in the same transaction.
                 children = sorted(self._find_children(path, revnum))
                 for child in children:
                     # Can we move a child directory and its
                     # parent in the same commit? (probably can). Could
                     # cause problems if instead of revnum -1,
                     # we have to look in (copyfrom_path, revnum - 1)
                     entrypath = self.getrelpath("/" + child)
-                    # print child, self.module, entrypath
                     if entrypath:
                         # Need to filter out directories here...
                         kind = self._checkpath(entrypath, revnum)
                         if kind != svn.core.svn_node_dir:
                             entries.append(self.recode(entrypath))
 
-                # Copies here (must copy all from source) Probably not
-                # a real problem for us if source does not exist
+                # Handle directory copies
                 if not ent.copyfrom_path or not parents:
                     continue
                 # Copy sources not in parent revisions cannot be
                 # represented, ignore their origin for now
                 pmodule, prevnum = self.revsplit(parents[0])[1:]
                 if ent.copyfrom_rev < prevnum:
                     continue
-                copyfrompath = ent.copyfrom_path.decode(self.encoding)
-                copyfrompath = self.getrelpath(copyfrompath, pmodule)
+                copyfrompath = self.getrelpath(ent.copyfrom_path, pmodule)
                 if not copyfrompath:
                     continue
                 copyfrom[path] = ent
                 self.ui.debug(_("mark %s came from %s:%d\n")
                               % (path, copyfrompath, ent.copyfrom_rev))
                 children = self._find_children(ent.copyfrom_path, ent.copyfrom_rev)
                 children.sort()
                 for child in children:
                     entrypath = self.getrelpath("/" + child, pmodule)
                     if not entrypath:
                         continue
-                    entry = entrypath.decode(self.encoding)
-                    copytopath = path + entry[len(copyfrompath):]
+                    copytopath = path + entrypath[len(copyfrompath):]
                     copytopath = self.getrelpath(copytopath)
-                    copies[self.recode(copytopath)] = self.recode(entry, pmodule)
+                    copies[self.recode(copytopath)] = self.recode(entrypath)
 
         return (list(set(entries)), copies)
 
     def _fetch_revisions(self, from_revnum, to_revnum):
         if from_revnum < to_revnum:
             from_revnum, to_revnum = to_revnum, from_revnum
 
         self.child_cset = None
 
         def parselogentry(orig_paths, revnum, author, date, message):
             """Return the parsed commit object or None, and True if
             the revision is a branch root.
             """
             self.ui.debug(_("parsing revision %d (%d changes)\n") %
                           (revnum, len(orig_paths)))
 
             branched = False
             rev = self.revid(revnum)
             # branch log might return entries for a parent we already have
 
             if rev in self.commits or revnum < to_revnum:
                 return None, branched
 
             parents = []
             # check whether this revision is the start of a branch or part
             # of a branch renaming
             orig_paths = sorted(orig_paths.iteritems())
             root_paths = [(p,e) for p,e in orig_paths if self.module.startswith(p)]
             if root_paths:
                 path, ent = root_paths[-1]
                 if ent.copyfrom_path:
                     branched = True
                     newpath = ent.copyfrom_path + self.module[len(path):]
                     # ent.copyfrom_rev may not be the actual last revision
                     previd = self.latest(newpath, ent.copyfrom_rev)
                     if previd is not None:
                         prevmodule, prevnum = self.revsplit(previd)[1:]
                         if prevnum >= self.startrev:
                             parents = [previd]
                             self.ui.note(_('found parent of branch %s at %d: %s\n') %
                                          (self.module, prevnum, prevmodule))
                 else:
                     self.ui.debug(_("no copyfrom path, don't know what to do.\n"))
 
             paths = []
             # filter out unrelated paths
             for path, ent in orig_paths:
                 if self.getrelpath(path) is None:
                     continue
                 paths.append((path, ent))
 
             # Example SVN datetime. Includes microseconds.
             # ISO-8601 conformant
             # '2007-01-04T17:35:00.902377Z'
             date = util.parsedate(date[:19] + " UTC", ["%Y-%m-%dT%H:%M:%S"])
 
             log = message and self.recode(message) or ''
             author = author and self.recode(author) or ''
             try:
                 branch = self.module.split("/")[-1]
                 if branch == 'trunk':
                     branch = ''
             except IndexError:
                 branch = None
 
             cset = commit(author=author,
                           date=util.datestr(date),
                           desc=log,
                           parents=parents,
                           branch=branch,
-                          rev=rev.encode('utf-8'))
+                          rev=rev)
 
             self.commits[rev] = cset
             # The parents list is *shared* among self.paths and the
             # commit object. Both will be updated below.
             self.paths[rev] = (paths, cset.parents)
             if self.child_cset and not self.child_cset.parents:
                 self.child_cset.parents[:] = [rev]
             self.child_cset = cset
             return cset, branched
 
         self.ui.note(_('fetching revision log for "%s" from %d to %d\n') %
                      (self.module, from_revnum, to_revnum))
 
         try:
             firstcset = None
             lastonbranch = False
             stream = self._getlog([self.module], from_revnum, to_revnum)
             try:
                 for entry in stream:
                     paths, revnum, author, date, message = entry
                     if revnum < self.startrev:
                         lastonbranch = True
                         break
-                    if self.is_blacklisted(revnum):
-                        self.ui.note(_('skipping blacklisted revision %d\n')
-                                     % revnum)
-                        continue
                     if not paths:
                         self.ui.debug(_('revision %d has no entries\n') % revnum)
                         continue
                     cset, lastonbranch = parselogentry(paths, revnum, author,
                                                        date, message)
                     if cset:
                         firstcset = cset
                     if lastonbranch:
                         break
             finally:
                 stream.close()
 
             if not lastonbranch and firstcset and not firstcset.parents:
                 # The first revision of the sequence (the last fetched one)
                 # has invalid parents if not a branch root. Find the parent
                 # revision now, if any.
                 try:
                     firstrevnum = self.revnum(firstcset.rev)
                     if firstrevnum > 1:
                         latest = self.latest(self.module, firstrevnum - 1)
                         if latest:
                             firstcset.parents.append(latest)
                 except SvnPathNotFound:
                     pass
         except SubversionException, (inst, num):
             if num == svn.core.SVN_ERR_FS_NO_SUCH_REVISION:
                 raise util.Abort(_('svn: branch has no revision %s') % to_revnum)
             raise
 
     def _getfile(self, file, rev):
         # TODO: ra.get_file transmits the whole file instead of diffs.
         mode = ''
         try:
             new_module, revnum = self.revsplit(rev)[1:]
             if self.module != new_module:
                 self.module = new_module
                 self.reparent(self.module)
             io = StringIO()
             info = svn.ra.get_file(self.ra, file, revnum, io)
             data = io.getvalue()
             # ra.get_files() seems to keep a reference on the input buffer
             # preventing collection. Release it explicitely.
             io.close()
             if isinstance(info, list):
                 info = info[-1]
             mode = ("svn:executable" in info) and 'x' or ''
             mode = ("svn:special" in info) and 'l' or mode
         except SubversionException, e:
             notfound = (svn.core.SVN_ERR_FS_NOT_FOUND,
                 svn.core.SVN_ERR_RA_DAV_PATH_NOT_FOUND)
             if e.apr_err in notfound: # File not found
                 raise IOError()
             raise
         if mode == 'l':
             link_prefix = "link "
             if data.startswith(link_prefix):
                 data = data[len(link_prefix):]
         return data, mode
 
     def _find_children(self, path, revnum):
         path = path.strip('/')
         pool = Pool()
         rpath = '/'.join([self.baseurl, urllib.quote(path)]).strip('/')
         return ['%s/%s' % (path, x) for x in
                 svn.client.ls(rpath, optrev(revnum), True, self.ctx, pool).keys()]
 
     def getrelpath(self, path, module=None):
         if module is None:
             module = self.module
         # Given the repository url of this wc, say
         #   "http://server/plone/CMFPlone/branches/Plone-2_0-branch"
         # extract the "entry" portion (a relative path) from what
         # svn log --xml says, ie
         #   "/CMFPlone/branches/Plone-2_0-branch/tests/PloneTestCase.py"
         # that is to say "tests/PloneTestCase.py"
         if path.startswith(module):
             relative = path.rstrip('/')[len(module):]
             if relative.startswith('/'):
                 return relative[1:]
             elif relative == '':
                 return relative
 
         # The path is outside our tracked tree...
         self.ui.debug(_('%r is not under %r, ignoring\n') % (path, module))
         return None
 
     def _checkpath(self, path, revnum):
         # ra.check_path does not like leading slashes very much, it leads
         # to PROPFIND subversion errors
         return svn.ra.check_path(self.ra, path.strip('/'), revnum)
 
     def _getlog(self, paths, start, end, limit=0, discover_changed_paths=True,
                 strict_node_history=False):
         # Normalize path names, svn >= 1.5 only wants paths relative to
         # supplied URL
         relpaths = []
         for p in paths:
             if not p.startswith('/'):
                 p = self.module + '/' + p
             relpaths.append(p.strip('/'))
         args = [self.baseurl, relpaths, start, end, limit, discover_changed_paths,
                 strict_node_history]
         arg = encodeargs(args)
         hgexe = util.hgexecutable()
         cmd = '%s debugsvnlog' % util.shellquote(hgexe)
         stdin, stdout = util.popen2(cmd)
         stdin.write(arg)
         stdin.close()
         return logstream(stdout)
 
 pre_revprop_change = '''#!/bin/sh
 
 REPOS="$1"
 REV="$2"
 USER="$3"
 PROPNAME="$4"
 ACTION="$5"
 
 if [ "$ACTION" = "M" -a "$PROPNAME" = "svn:log" ]; then exit 0; fi
 if [ "$ACTION" = "A" -a "$PROPNAME" = "hg:convert-branch" ]; then exit 0; fi
 if [ "$ACTION" = "A" -a "$PROPNAME" = "hg:convert-rev" ]; then exit 0; fi
 
 echo "Changing prohibited revision property" >&2
 exit 1
 '''
 
 class svn_sink(converter_sink, commandline):
     commit_re = re.compile(r'Committed revision (\d+).', re.M)
 
     def prerun(self):
         if self.wc:
             os.chdir(self.wc)
 
     def postrun(self):
         if self.wc:
             os.chdir(self.cwd)
 
     def join(self, name):
         return os.path.join(self.wc, '.svn', name)
 
     def revmapfile(self):
         return self.join('hg-shamap')
 
     def authorfile(self):
         return self.join('hg-authormap')
 
     def __init__(self, ui, path):
         converter_sink.__init__(self, ui, path)
         commandline.__init__(self, ui, 'svn')
         self.delete = []
         self.setexec = []
         self.delexec = []
         self.copies = []
         self.wc = None
         self.cwd = os.getcwd()
 
         path = os.path.realpath(path)
 
         created = False
         if os.path.isfile(os.path.join(path, '.svn', 'entries')):
             self.wc = path
             self.run0('update')
         else:
             wcpath = os.path.join(os.getcwd(), os.path.basename(path) + '-wc')
 
             if os.path.isdir(os.path.dirname(path)):
                 if not os.path.exists(os.path.join(path, 'db', 'fs-type')):
                     ui.status(_('initializing svn repo %r\n') %
                               os.path.basename(path))
                     commandline(ui, 'svnadmin').run0('create', path)
                     created = path
                 path = util.normpath(path)
                 if not path.startswith('/'):
                     path = '/' + path
                 path = 'file://' + path
 
             ui.status(_('initializing svn wc %r\n') % os.path.basename(wcpath))
             self.run0('checkout', path, wcpath)
 
             self.wc = wcpath
         self.opener = util.opener(self.wc)
         self.wopener = util.opener(self.wc)
         self.childmap = mapfile(ui, self.join('hg-childmap'))
         self.is_exec = util.checkexec(self.wc) and util.is_exec or None
 
         if created:
             hook = os.path.join(created, 'hooks', 'pre-revprop-change')
             fp = open(hook, 'w')
             fp.write(pre_revprop_change)
             fp.close()
             util.set_flags(hook, False, True)
 
         xport = transport.SvnRaTransport(url=geturl(path))
         self.uuid = svn.ra.get_uuid(xport.ra)
 
     def wjoin(self, *names):
         return os.path.join(self.wc, *names)
 
     def putfile(self, filename, flags, data):
         if 'l' in flags:
             self.wopener.symlink(data, filename)
         else:
             try:
                 if os.path.islink(self.wjoin(filename)):
                     os.unlink(filename)
             except OSError:
                 pass
             self.wopener(filename, 'w').write(data)
 
             if self.is_exec:
                 was_exec = self.is_exec(self.wjoin(filename))
             else:
                 # On filesystems not supporting execute-bit, there is no way
                 # to know if it is set but asking subversion. Setting it
                 # systematically is just as expensive and much simpler.
                 was_exec = 'x' not in flags
 
             util.set_flags(self.wjoin(filename), False, 'x' in flags)
             if was_exec:
                 if 'x' not in flags:
                     self.delexec.append(filename)
             else:
                 if 'x' in flags:
                     self.setexec.append(filename)
 
     def _copyfile(self, source, dest):
         # SVN's copy command pukes if the destination file exists, but
         # our copyfile method expects to record a copy that has
         # already occurred.  Cross the semantic gap.
         wdest = self.wjoin(dest)
         exists = os.path.exists(wdest)
         if exists:
             fd, tempname = tempfile.mkstemp(
                 prefix='hg-copy-', dir=os.path.dirname(wdest))
             os.close(fd)
             os.unlink(tempname)
             os.rename(wdest, tempname)
         try:
             self.run0('copy', source, dest)
         finally:
             if exists:
                 try:
                     os.unlink(wdest)
                 except OSError:
                     pass
                 os.rename(tempname, wdest)
 
     def dirs_of(self, files):
         dirs = set()
         for f in files:
             if os.path.isdir(self.wjoin(f)):
                 dirs.add(f)
             for i in strutil.rfindall(f, '/'):
                 dirs.add(f[:i])
         return dirs
 
     def add_dirs(self, files):
         add_dirs = [d for d in sorted(self.dirs_of(files))
                     if not os.path.exists(self.wjoin(d, '.svn', 'entries'))]
         if add_dirs:
             self.xargs(add_dirs, 'add', non_recursive=True, quiet=True)
         return add_dirs
 
     def add_files(self, files):
         if files:
             self.xargs(files, 'add', quiet=True)
         return files
 
     def tidy_dirs(self, names):
         deleted = []
         for d in sorted(self.dirs_of(names), reverse=True):
             wd = self.wjoin(d)
             if os.listdir(wd) == '.svn':
                 self.run0('delete', d)
                 deleted.append(d)
         return deleted
 
     def addchild(self, parent, child):
         self.childmap[parent] = child
 
     def revid(self, rev):
         return u"svn:%s@%s" % (self.uuid, rev)
 
     def putcommit(self, files, copies, parents, commit, source, revmap):
         # Apply changes to working copy
         for f, v in files:
             try:
                 data = source.getfile(f, v)
             except IOError:
                 self.delete.append(f)
             else:
                 e = source.getmode(f, v)
                 self.putfile(f, e, data)
                 if f in copies:
                     self.copies.append([copies[f], f])
         files = [f[0] for f in files]
 
         for parent in parents:
             try:
                 return self.revid(self.childmap[parent])
             except KeyError:
                 pass
         entries = set(self.delete)
         files = frozenset(files)
         entries.update(self.add_dirs(files.difference(entries)))
         if self.copies:
             for s, d in self.copies:
                 self._copyfile(s, d)
             self.copies = []
         if self.delete:
             self.xargs(self.delete, 'delete')
             self.delete = []
         entries.update(self.add_files(files.difference(entries)))
         entries.update(self.tidy_dirs(entries))
         if self.delexec:
             self.xargs(self.delexec, 'propdel', 'svn:executable')
             self.delexec = []
         if self.setexec:
             self.xargs(self.setexec, 'propset', 'svn:executable', '*')
             self.setexec = []
 
         fd, messagefile = tempfile.mkstemp(prefix='hg-convert-')
         fp = os.fdopen(fd, 'w')
         fp.write(commit.desc)
         fp.close()
         try:
             output = self.run0('commit',
                                username=util.shortuser(commit.author),
                                file=messagefile,
                                encoding='utf-8')
             try:
                 rev = self.commit_re.search(output).group(1)
             except AttributeError:
                 self.ui.warn(_('unexpected svn output:\n'))
                 self.ui.warn(output)
                 raise util.Abort(_('unable to cope with svn output'))
             if commit.rev:
                 self.run('propset', 'hg:convert-rev', commit.rev,
                          revprop=True, revision=rev)
             if commit.branch and commit.branch != 'default':
                 self.run('propset', 'hg:convert-branch', commit.branch,
                          revprop=True, revision=rev)
             for parent in parents:
                 self.addchild(parent, rev)
             return self.revid(rev)
         finally:
             os.unlink(messagefile)
 
     def puttags(self, tags):
         self.ui.warn(_('XXX TAGS NOT IMPLEMENTED YET\n'))

hgext/fetch.py

@@ -1,148 +1,148 b''
 # fetch.py - pull and merge remote changes
 #
 # Copyright 2006 Vadim Gelfer <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''pulling, updating and merging in one command'''
+'''pull, update and merge in one command'''
 
 from mercurial.i18n import _
 from mercurial.node import nullid, short
 from mercurial import commands, cmdutil, hg, util, url, error
 from mercurial.lock import release
 
 def fetch(ui, repo, source='default', **opts):
     '''pull changes from a remote repository, merge new changes if needed.
 
     This finds all changes from the repository at the specified path
     or URL and adds them to the local repository.
 
     If the pulled changes add a new branch head, the head is
     automatically merged, and the result of the merge is committed.
     Otherwise, the working directory is updated to include the new
     changes.
 
     When a merge occurs, the newly pulled changes are assumed to be
     "authoritative". The head of the new changes is used as the first
     parent, with local changes as the second. To switch the merge
     order, use --switch-parent.
 
     See 'hg help dates' for a list of formats valid for -d/--date.
     '''
 
     date = opts.get('date')
     if date:
         opts['date'] = util.parsedate(date)
 
     parent, p2 = repo.dirstate.parents()
     branch = repo.dirstate.branch()
     branchnode = repo.branchtags().get(branch)
     if parent != branchnode:
         raise util.Abort(_('working dir not at branch tip '
                            '(use "hg update" to check out branch tip)'))
 
     if p2 != nullid:
         raise util.Abort(_('outstanding uncommitted merge'))
 
     wlock = lock = None
     try:
         wlock = repo.wlock()
         lock = repo.lock()
         mod, add, rem, del_ = repo.status()[:4]
 
         if mod or add or rem:
             raise util.Abort(_('outstanding uncommitted changes'))
         if del_:
             raise util.Abort(_('working directory is missing some files'))
         bheads = repo.branchheads(branch)
         bheads = [head for head in bheads if len(repo[head].children()) == 0]
         if len(bheads) > 1:
             raise util.Abort(_('multiple heads in this branch '
                                '(use "hg heads ." and "hg merge" to merge)'))
 
         other = hg.repository(cmdutil.remoteui(repo, opts),
                               ui.expandpath(source))
         ui.status(_('pulling from %s\n') %
                   url.hidepassword(ui.expandpath(source)))
         revs = None
         if opts['rev']:
             try:
                 revs = [other.lookup(rev) for rev in opts['rev']]
             except error.CapabilityError:
                 err = _("Other repository doesn't support revision lookup, "
                         "so a rev cannot be specified.")
                 raise util.Abort(err)
 
         # Are there any changes at all?
         modheads = repo.pull(other, heads=revs)
         if modheads == 0:
             return 0
 
         # Is this a simple fast-forward along the current branch?
         newheads = repo.branchheads(branch)
         newheads = [head for head in newheads if len(repo[head].children()) == 0]
         newchildren = repo.changelog.nodesbetween([parent], newheads)[2]
         if len(newheads) == 1:
             if newchildren[0] != parent:
                 return hg.clean(repo, newchildren[0])
             else:
                 return
 
         # Are there more than one additional branch heads?
         newchildren = [n for n in newchildren if n != parent]
         newparent = parent
         if newchildren:
             newparent = newchildren[0]
             hg.clean(repo, newparent)
         newheads = [n for n in newheads if n != newparent]
         if len(newheads) > 1:
             ui.status(_('not merging with %d other new branch heads '
                         '(use "hg heads ." and "hg merge" to merge them)\n') %
                       (len(newheads) - 1))
             return
 
         # Otherwise, let's merge.
         err = False
         if newheads:
             # By default, we consider the repository we're pulling
             # *from* as authoritative, so we merge our changes into
             # theirs.
             if opts['switch_parent']:
                 firstparent, secondparent = newparent, newheads[0]
             else:
                 firstparent, secondparent = newheads[0], newparent
                 ui.status(_('updating to %d:%s\n') %
                           (repo.changelog.rev(firstparent),
                            short(firstparent)))
             hg.clean(repo, firstparent)
             ui.status(_('merging with %d:%s\n') %
                       (repo.changelog.rev(secondparent), short(secondparent)))
             err = hg.merge(repo, secondparent, remind=False)
 
         if not err:
             message = (cmdutil.logmessage(opts) or
                        (_('Automated merge with %s') %
                         url.removeauth(other.url())))
             editor = cmdutil.commiteditor
             if opts.get('force_editor') or opts.get('edit'):
                 editor = cmdutil.commitforceeditor
             n = repo.commit(message, opts['user'], opts['date'],
                             force=True, editor=editor)
             ui.status(_('new changeset %d:%s merges remote changes '
                         'with local\n') % (repo.changelog.rev(n),
                                            short(n)))
 
     finally:
         release(lock, wlock)
 
 cmdtable = {
     'fetch':
         (fetch,
         [('r', 'rev', [], _('a specific revision you would like to pull')),
          ('e', 'edit', None, _('edit commit message')),
          ('', 'force-editor', None, _('edit commit message (DEPRECATED)')),
          ('', 'switch-parent', None, _('switch parents when merging')),
         ] + commands.commitopts + commands.commitopts2 + commands.remoteopts,
         _('hg fetch [SOURCE]')),
 }

hgext/gpg.py

@@ -1,283 +1,283 b''
 # Copyright 2005, 2006 Benoit Boissinot <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''GnuPG signing extension for Mercurial'''
+'''sign and verify changesets'''
 
 import os, tempfile, binascii
 from mercurial import util, commands, match
 from mercurial import node as hgnode
 from mercurial.i18n import _
 
 class gpg(object):
     def __init__(self, path, key=None):
         self.path = path
         self.key = (key and " --local-user \"%s\"" % key) or ""
 
     def sign(self, data):
         gpgcmd = "%s --sign --detach-sign%s" % (self.path, self.key)
         return util.filter(data, gpgcmd)
 
     def verify(self, data, sig):
         """ returns of the good and bad signatures"""
         sigfile = datafile = None
         try:
             # create temporary files
             fd, sigfile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".sig")
             fp = os.fdopen(fd, 'wb')
             fp.write(sig)
             fp.close()
             fd, datafile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".txt")
             fp = os.fdopen(fd, 'wb')
             fp.write(data)
             fp.close()
             gpgcmd = ("%s --logger-fd 1 --status-fd 1 --verify "
                       "\"%s\" \"%s\"" % (self.path, sigfile, datafile))
             ret = util.filter("", gpgcmd)
         finally:
             for f in (sigfile, datafile):
                 try:
                     if f: os.unlink(f)
                 except: pass
         keys = []
         key, fingerprint = None, None
         err = ""
         for l in ret.splitlines():
             # see DETAILS in the gnupg documentation
             # filter the logger output
             if not l.startswith("[GNUPG:]"):
                 continue
             l = l[9:]
             if l.startswith("ERRSIG"):
                 err = _("error while verifying signature")
                 break
             elif l.startswith("VALIDSIG"):
                 # fingerprint of the primary key
                 fingerprint = l.split()[10]
             elif (l.startswith("GOODSIG") or
                   l.startswith("EXPSIG") or
                   l.startswith("EXPKEYSIG") or
                   l.startswith("BADSIG")):
                 if key is not None:
                     keys.append(key + [fingerprint])
                 key = l.split(" ", 2)
                 fingerprint = None
         if err:
             return err, []
         if key is not None:
             keys.append(key + [fingerprint])
         return err, keys
 
 def newgpg(ui, **opts):
     """create a new gpg instance"""
     gpgpath = ui.config("gpg", "cmd", "gpg")
     gpgkey = opts.get('key')
     if not gpgkey:
         gpgkey = ui.config("gpg", "key", None)
     return gpg(gpgpath, gpgkey)
 
 def sigwalk(repo):
     """
     walk over every sigs, yields a couple
     ((node, version, sig), (filename, linenumber))
     """
     def parsefile(fileiter, context):
         ln = 1
         for l in fileiter:
             if not l:
                 continue
             yield (l.split(" ", 2), (context, ln))
             ln +=1
 
     # read the heads
     fl = repo.file(".hgsigs")
     for r in reversed(fl.heads()):
         fn = ".hgsigs|%s" % hgnode.short(r)
         for item in parsefile(fl.read(r).splitlines(), fn):
             yield item
     try:
         # read local signatures
         fn = "localsigs"
         for item in parsefile(repo.opener(fn), fn):
             yield item
     except IOError:
         pass
 
 def getkeys(ui, repo, mygpg, sigdata, context):
     """get the keys who signed a data"""
     fn, ln = context
     node, version, sig = sigdata
     prefix = "%s:%d" % (fn, ln)
     node = hgnode.bin(node)
 
     data = node2txt(repo, node, version)
     sig = binascii.a2b_base64(sig)
     err, keys = mygpg.verify(data, sig)
     if err:
         ui.warn("%s:%d %s\n" % (fn, ln , err))
         return None
 
     validkeys = []
     # warn for expired key and/or sigs
     for key in keys:
         if key[0] == "BADSIG":
             ui.write(_("%s Bad signature from \"%s\"\n") % (prefix, key[2]))
             continue
         if key[0] == "EXPSIG":
             ui.write(_("%s Note: Signature has expired"
                        " (signed by: \"%s\")\n") % (prefix, key[2]))
         elif key[0] == "EXPKEYSIG":
             ui.write(_("%s Note: This key has expired"
                        " (signed by: \"%s\")\n") % (prefix, key[2]))
         validkeys.append((key[1], key[2], key[3]))
     return validkeys
 
 def sigs(ui, repo):
     """list signed changesets"""
     mygpg = newgpg(ui)
     revs = {}
 
     for data, context in sigwalk(repo):
         node, version, sig = data
         fn, ln = context
         try:
             n = repo.lookup(node)
         except KeyError:
             ui.warn(_("%s:%d node does not exist\n") % (fn, ln))
             continue
         r = repo.changelog.rev(n)
         keys = getkeys(ui, repo, mygpg, data, context)
         if not keys:
             continue
         revs.setdefault(r, [])
         revs[r].extend(keys)
     for rev in sorted(revs, reverse=True):
         for k in revs[rev]:
             r = "%5d:%s" % (rev, hgnode.hex(repo.changelog.node(rev)))
             ui.write("%-30s %s\n" % (keystr(ui, k), r))
 
 def check(ui, repo, rev):
     """verify all the signatures there may be for a particular revision"""
     mygpg = newgpg(ui)
     rev = repo.lookup(rev)
     hexrev = hgnode.hex(rev)
     keys = []
 
     for data, context in sigwalk(repo):
         node, version, sig = data
         if node == hexrev:
             k = getkeys(ui, repo, mygpg, data, context)
             if k:
                 keys.extend(k)
 
     if not keys:
         ui.write(_("No valid signature for %s\n") % hgnode.short(rev))
         return
 
     # print summary
     ui.write("%s is signed by:\n" % hgnode.short(rev))
     for key in keys:
         ui.write(" %s\n" % keystr(ui, key))
 
 def keystr(ui, key):
     """associate a string to a key (username, comment)"""
     keyid, user, fingerprint = key
     comment = ui.config("gpg", fingerprint, None)
     if comment:
         return "%s (%s)" % (user, comment)
     else:
         return user
 
 def sign(ui, repo, *revs, **opts):
     """add a signature for the current or given revision
 
     If no revision is given, the parent of the working directory is used,
     or tip if no revision is checked out.
 
     See 'hg help dates' for a list of formats valid for -d/--date.
     """
 
     mygpg = newgpg(ui, **opts)
     sigver = "0"
     sigmessage = ""
 
     date = opts.get('date')
     if date:
         opts['date'] = util.parsedate(date)
 
     if revs:
         nodes = [repo.lookup(n) for n in revs]
     else:
         nodes = [node for node in repo.dirstate.parents()
                  if node != hgnode.nullid]
         if len(nodes) > 1:
             raise util.Abort(_('uncommitted merge - please provide a '
                                'specific revision'))
         if not nodes:
             nodes = [repo.changelog.tip()]
 
     for n in nodes:
         hexnode = hgnode.hex(n)
         ui.write("Signing %d:%s\n" % (repo.changelog.rev(n),
                                       hgnode.short(n)))
         # build data
         data = node2txt(repo, n, sigver)
         sig = mygpg.sign(data)
         if not sig:
             raise util.Abort(_("Error while signing"))
         sig = binascii.b2a_base64(sig)
         sig = sig.replace("\n", "")
         sigmessage += "%s %s %s\n" % (hexnode, sigver, sig)
 
     # write it
     if opts['local']:
         repo.opener("localsigs", "ab").write(sigmessage)
         return
 
     for x in repo.status(unknown=True)[:5]:
         if ".hgsigs" in x and not opts["force"]:
             raise util.Abort(_("working copy of .hgsigs is changed "
                                "(please commit .hgsigs manually "
                                "or use --force)"))
 
     repo.wfile(".hgsigs", "ab").write(sigmessage)
 
     if '.hgsigs' not in repo.dirstate:
         repo.add([".hgsigs"])
 
     if opts["no_commit"]:
         return
 
     message = opts['message']
     if not message:
         message = "\n".join([_("Added signature for changeset %s")
                              % hgnode.short(n)
                              for n in nodes])
     try:
         m = match.exact(repo.root, '', ['.hgsigs'])
         repo.commit(message, opts['user'], opts['date'], match=m)
     except ValueError, inst:
         raise util.Abort(str(inst))
 
 def node2txt(repo, node, ver):
     """map a manifest into some text"""
     if ver == "0":
         return "%s\n" % hgnode.hex(node)
     else:
         raise util.Abort(_("unknown signature version"))
 
 cmdtable = {
     "sign":
         (sign,
          [('l', 'local', None, _('make the signature local')),
           ('f', 'force', None, _('sign even if the sigfile is modified')),
           ('', 'no-commit', None, _('do not commit the sigfile after signing')),
           ('k', 'key', '', _('the key id to sign with')),
           ('m', 'message', '', _('commit message')),
          ] + commands.commitopts2,
          _('hg sign [OPTION]... [REVISION]...')),
     "sigcheck": (check, [], _('hg sigcheck REVISION')),
     "sigs": (sigs, [], _('hg sigs')),
 }
 

hgext/graphlog.py

@@ -1,376 +1,376 b''
 # ASCII graph log extension for Mercurial
 #
 # Copyright 2007 Joel Rosdahl <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''show revision graphs in terminal windows
+'''show revision graphs in terminals
 
 This extension adds a --graph option to the incoming, outgoing and log
 commands. When this options is given, an ASCII representation of the
 revision graph is also shown.
 '''
 
 import os, sys
 from mercurial.cmdutil import revrange, show_changeset
 from mercurial.commands import templateopts
 from mercurial.i18n import _
 from mercurial.node import nullrev
 from mercurial import bundlerepo, changegroup, cmdutil, commands, extensions
 from mercurial import hg, url, util, graphmod
 
 ASCIIDATA = 'ASC'
 
 def asciiformat(ui, repo, revdag, opts):
     """formats a changelog DAG walk for ASCII output"""
     showparents = [ctx.node() for ctx in repo[None].parents()]
     displayer = show_changeset(ui, repo, opts, buffered=True)
     for (id, type, ctx, parentids) in revdag:
         if type != graphmod.CHANGESET:
             continue
         displayer.show(ctx)
         lines = displayer.hunk.pop(ctx.rev()).split('\n')[:-1]
         char = ctx.node() in showparents and '@' or 'o'
         yield (id, ASCIIDATA, (char, lines), parentids)
 
 def asciiedges(nodes):
     """adds edge info to changelog DAG walk suitable for ascii()"""
     seen = []
     for node, type, data, parents in nodes:
         if node not in seen:
             seen.append(node)
         nodeidx = seen.index(node)
 
         knownparents = []
         newparents = []
         for parent in parents:
             if parent in seen:
                 knownparents.append(parent)
             else:
                 newparents.append(parent)
 
         ncols = len(seen)
         nextseen = seen[:]
         nextseen[nodeidx:nodeidx + 1] = newparents
         edges = [(nodeidx, nextseen.index(p)) for p in knownparents]
 
         if len(newparents) > 0:
             edges.append((nodeidx, nodeidx))
         if len(newparents) > 1:
             edges.append((nodeidx, nodeidx + 1))
         nmorecols = len(nextseen) - ncols
         seen = nextseen
         yield (nodeidx, type, data, edges, ncols, nmorecols)
 
 def fix_long_right_edges(edges):
     for (i, (start, end)) in enumerate(edges):
         if end > start:
             edges[i] = (start, end + 1)
 
 def get_nodeline_edges_tail(
         node_index, p_node_index, n_columns, n_columns_diff, p_diff, fix_tail):
     if fix_tail and n_columns_diff == p_diff and n_columns_diff != 0:
         # Still going in the same non-vertical direction.
         if n_columns_diff == -1:
             start = max(node_index + 1, p_node_index)
             tail = ["|", " "] * (start - node_index - 1)
             tail.extend(["/", " "] * (n_columns - start))
             return tail
         else:
             return ["\\", " "] * (n_columns - node_index - 1)
     else:
         return ["|", " "] * (n_columns - node_index - 1)
 
 def draw_edges(edges, nodeline, interline):
     for (start, end) in edges:
         if start == end + 1:
             interline[2 * end + 1] = "/"
         elif start == end - 1:
             interline[2 * start + 1] = "\\"
         elif start == end:
             interline[2 * start] = "|"
         else:
             nodeline[2 * end] = "+"
             if start > end:
                 (start, end) = (end,start)
             for i in range(2 * start + 1, 2 * end):
                 if nodeline[i] != "+":
                     nodeline[i] = "-"
 
 def get_padding_line(ni, n_columns, edges):
     line = []
     line.extend(["|", " "] * ni)
     if (ni, ni - 1) in edges or (ni, ni) in edges:
         # (ni, ni - 1)      (ni, ni)
         # | | | |           | | | |
         # +---o |           | o---+
         # | | c |           | c | |
         # | |/ /            | |/ /
         # | | |             | | |
         c = "|"
     else:
         c = " "
     line.extend([c, " "])
     line.extend(["|", " "] * (n_columns - ni - 1))
     return line
 
 def ascii(ui, dag):
     """prints an ASCII graph of the DAG
 
     dag is a generator that emits tuples with the following elements:
 
       - Column of the current node in the set of ongoing edges.
       - Type indicator of node data == ASCIIDATA.
       - Payload: (char, lines):
         - Character to use as node's symbol.
         - List of lines to display as the node's text.
       - Edges; a list of (col, next_col) indicating the edges between
         the current node and its parents.
       - Number of columns (ongoing edges) in the current revision.
       - The difference between the number of columns (ongoing edges)
         in the next revision and the number of columns (ongoing edges)
         in the current revision. That is: -1 means one column removed;
         0 means no columns added or removed; 1 means one column added.
     """
     prev_n_columns_diff = 0
     prev_node_index = 0
     for (node_index, type, (node_ch, node_lines), edges, n_columns, n_columns_diff) in dag:
 
         assert -2 < n_columns_diff < 2
         if n_columns_diff == -1:
             # Transform
             #
             #     | | |        | | |
             #     o | |  into  o---+
             #     |X /         |/ /
             #     | |          | |
             fix_long_right_edges(edges)
 
         # add_padding_line says whether to rewrite
         #
         #     | | | |        | | | |
         #     | o---+  into  | o---+
         #     |  / /         |   | |  # <--- padding line
         #     o | |          |  / /
         #                    o | |
         add_padding_line = (len(node_lines) > 2 and
                             n_columns_diff == -1 and
                             [x for (x, y) in edges if x + 1 < y])
 
         # fix_nodeline_tail says whether to rewrite
         #
         #     | | o | |        | | o | |
         #     | | |/ /         | | |/ /
         #     | o | |    into  | o / /   # <--- fixed nodeline tail
         #     | |/ /           | |/ /
         #     o | |            o | |
         fix_nodeline_tail = len(node_lines) <= 2 and not add_padding_line
 
         # nodeline is the line containing the node character (typically o)
         nodeline = ["|", " "] * node_index
         nodeline.extend([node_ch, " "])
 
         nodeline.extend(
             get_nodeline_edges_tail(
                 node_index, prev_node_index, n_columns, n_columns_diff,
                 prev_n_columns_diff, fix_nodeline_tail))
 
         # shift_interline is the line containing the non-vertical
         # edges between this entry and the next
         shift_interline = ["|", " "] * node_index
         if n_columns_diff == -1:
             n_spaces = 1
             edge_ch = "/"
         elif n_columns_diff == 0:
             n_spaces = 2
             edge_ch = "|"
         else:
             n_spaces = 3
             edge_ch = "\\"
         shift_interline.extend(n_spaces * [" "])
         shift_interline.extend([edge_ch, " "] * (n_columns - node_index - 1))
 
         # draw edges from the current node to its parents
         draw_edges(edges, nodeline, shift_interline)
 
         # lines is the list of all graph lines to print
         lines = [nodeline]
         if add_padding_line:
             lines.append(get_padding_line(node_index, n_columns, edges))
         lines.append(shift_interline)
 
         # make sure that there are as many graph lines as there are
         # log strings
         while len(node_lines) < len(lines):
             node_lines.append("")
         if len(lines) < len(node_lines):
             extra_interline = ["|", " "] * (n_columns + n_columns_diff)
             while len(lines) < len(node_lines):
                 lines.append(extra_interline)
 
         # print lines
         indentation_level = max(n_columns, n_columns + n_columns_diff)
         for (line, logstr) in zip(lines, node_lines):
             ln = "%-*s %s" % (2 * indentation_level, "".join(line), logstr)
             ui.write(ln.rstrip() + '\n')
 
         # ... and start over
         prev_node_index = node_index
         prev_n_columns_diff = n_columns_diff
 
 def get_revs(repo, rev_opt):
     if rev_opt:
         revs = revrange(repo, rev_opt)
         return (max(revs), min(revs))
     else:
         return (len(repo) - 1, 0)
 
 def check_unsupported_flags(opts):
     for op in ["follow", "follow_first", "date", "copies", "keyword", "remove",
                "only_merges", "user", "only_branch", "prune", "newest_first",
                "no_merges", "include", "exclude"]:
         if op in opts and opts[op]:
             raise util.Abort(_("--graph option is incompatible with --%s") % op)
 
 def graphlog(ui, repo, path=None, **opts):
     """show revision history alongside an ASCII revision graph
 
     Print a revision history alongside a revision graph drawn with
     ASCII characters.
 
     Nodes printed as an @ character are parents of the working
     directory.
     """
 
     check_unsupported_flags(opts)
     limit = cmdutil.loglimit(opts)
     start, stop = get_revs(repo, opts["rev"])
     stop = max(stop, start - limit + 1)
     if start == nullrev:
         return
 
     if path:
         path = util.canonpath(repo.root, os.getcwd(), path)
     if path: # could be reset in canonpath
         revdag = graphmod.filerevs(repo, path, start, stop)
     else:
         revdag = graphmod.revisions(repo, start, stop)
 
     fmtdag = asciiformat(ui, repo, revdag, opts)
     ascii(ui, asciiedges(fmtdag))
 
 def graphrevs(repo, nodes, opts):
     limit = cmdutil.loglimit(opts)
     nodes.reverse()
     if limit < sys.maxint:
         nodes = nodes[:limit]
     return graphmod.nodes(repo, nodes)
 
 def goutgoing(ui, repo, dest=None, **opts):
     """show the outgoing changesets alongside an ASCII revision graph
 
     Print the outgoing changesets alongside a revision graph drawn with
     ASCII characters.
 
     Nodes printed as an @ character are parents of the working
     directory.
     """
 
     check_unsupported_flags(opts)
     dest, revs, checkout = hg.parseurl(
         ui.expandpath(dest or 'default-push', dest or 'default'),
         opts.get('rev'))
     if revs:
         revs = [repo.lookup(rev) for rev in revs]
     other = hg.repository(cmdutil.remoteui(ui, opts), dest)
     ui.status(_('comparing with %s\n') % url.hidepassword(dest))
     o = repo.findoutgoing(other, force=opts.get('force'))
     if not o:
         ui.status(_("no changes found\n"))
         return
 
     o = repo.changelog.nodesbetween(o, revs)[0]
     revdag = graphrevs(repo, o, opts)
     fmtdag = asciiformat(ui, repo, revdag, opts)
     ascii(ui, asciiedges(fmtdag))
 
 def gincoming(ui, repo, source="default", **opts):
     """show the incoming changesets alongside an ASCII revision graph
 
     Print the incoming changesets alongside a revision graph drawn with
     ASCII characters.
 
     Nodes printed as an @ character are parents of the working
     directory.
     """
 
     check_unsupported_flags(opts)
     source, revs, checkout = hg.parseurl(ui.expandpath(source), opts.get('rev'))
     other = hg.repository(cmdutil.remoteui(repo, opts), source)
     ui.status(_('comparing with %s\n') % url.hidepassword(source))
     if revs:
         revs = [other.lookup(rev) for rev in revs]
     incoming = repo.findincoming(other, heads=revs, force=opts["force"])
     if not incoming:
         try:
             os.unlink(opts["bundle"])
         except:
             pass
         ui.status(_("no changes found\n"))
         return
 
     cleanup = None
     try:
 
         fname = opts["bundle"]
         if fname or not other.local():
             # create a bundle (uncompressed if other repo is not local)
             if revs is None:
                 cg = other.changegroup(incoming, "incoming")
             else:
                 cg = other.changegroupsubset(incoming, revs, 'incoming')
             bundletype = other.local() and "HG10BZ" or "HG10UN"
             fname = cleanup = changegroup.writebundle(cg, fname, bundletype)
             # keep written bundle?
             if opts["bundle"]:
                 cleanup = None
             if not other.local():
                 # use the created uncompressed bundlerepo
                 other = bundlerepo.bundlerepository(ui, repo.root, fname)
 
         chlist = other.changelog.nodesbetween(incoming, revs)[0]
         revdag = graphrevs(other, chlist, opts)
         fmtdag = asciiformat(ui, repo, revdag, opts)
         ascii(ui, asciiedges(fmtdag))
 
     finally:
         if hasattr(other, 'close'):
             other.close()
         if cleanup:
             os.unlink(cleanup)
 
 def uisetup(ui):
     '''Initialize the extension.'''
     _wrapcmd(ui, 'log', commands.table, graphlog)
     _wrapcmd(ui, 'incoming', commands.table, gincoming)
     _wrapcmd(ui, 'outgoing', commands.table, goutgoing)
 
 def _wrapcmd(ui, cmd, table, wrapfn):
     '''wrap the command'''
     def graph(orig, *args, **kwargs):
         if kwargs['graph']:
             return wrapfn(*args, **kwargs)
         return orig(*args, **kwargs)
     entry = extensions.wrapcommand(table, cmd, graph)
     entry[1].append(('G', 'graph', None, _("show the revision DAG")))
 
 cmdtable = {
     "glog":
         (graphlog,
          [('l', 'limit', '', _('limit number of changes displayed')),
           ('p', 'patch', False, _('show patch')),
           ('r', 'rev', [], _('show the specified revision or range')),
          ] + templateopts,
          _('hg glog [OPTION]... [FILE]')),
 }

hgext/hgcia.py

@@ -1,246 +1,246 b''
 # Copyright (C) 2007-8 Brendan Cully <[e-mail]>
 # Published under the GNU GPL
 
-"""CIA notification
+"""integrate Mercurial with a CIA notification service
 
 This is meant to be run as a changegroup or incoming hook.
 To configure it, set the following options in your hgrc:
 
 [cia]
 # your registered CIA user name
 user = foo
 # the name of the project in CIA
 project = foo
 # the module (subproject) (optional)
 #module = foo
 # Append a diffstat to the log message (optional)
 #diffstat = False
 # Template to use for log messages (optional)
 #template = {desc}\\n{baseurl}/rev/{node}-- {diffstat}
 # Style to use (optional)
 #style = foo
 # The URL of the CIA notification service (optional)
 # You can use mailto: URLs to send by email, eg
 # mailto:[e-mail]
 # Make sure to set email.from if you do this.
 #url = http://cia.vc/
 # print message instead of sending it (optional)
 #test = False
 
 [hooks]
 # one of these:
 changegroup.cia = python:hgcia.hook
 #incoming.cia = python:hgcia.hook
 
 [web]
 # If you want hyperlinks (optional)
 baseurl = http://server/path/to/repo
 """
 
 from mercurial.i18n import _
 from mercurial.node import *
 from mercurial import cmdutil, patch, templater, util, mail
 import email.Parser
 
 import xmlrpclib
 from xml.sax import saxutils
 
 socket_timeout = 30 # seconds
 try:
     # set a timeout for the socket so you don't have to wait so looooong
     # when cia.vc is having problems. requires python >= 2.3:
     import socket
     socket.setdefaulttimeout(socket_timeout)
 except:
     pass
 
 HGCIA_VERSION = '0.1'
 HGCIA_URL = 'http://hg.kublai.com/mercurial/hgcia'
 
 
 class ciamsg(object):
     """ A CIA message """
     def __init__(self, cia, ctx):
         self.cia = cia
         self.ctx = ctx
         self.url = self.cia.url
 
     def fileelem(self, path, uri, action):
         if uri:
             uri = ' uri=%s' % saxutils.quoteattr(uri)
         return '<file%s action=%s>%s</file>' % (
             uri, saxutils.quoteattr(action), saxutils.escape(path))
 
     def fileelems(self):
         n = self.ctx.node()
         f = self.cia.repo.status(self.ctx.parents()[0].node(), n)
         url = self.url or ''
         elems = []
         for path in f[0]:
             uri = '%s/diff/%s/%s' % (url, short(n), path)
             elems.append(self.fileelem(path, url and uri, 'modify'))
         for path in f[1]:
             # TODO: copy/rename ?
             uri = '%s/file/%s/%s' % (url, short(n), path)
             elems.append(self.fileelem(path, url and uri, 'add'))
         for path in f[2]:
             elems.append(self.fileelem(path, '', 'remove'))
 
         return '\n'.join(elems)
 
     def sourceelem(self, project, module=None, branch=None):
         msg = ['<source>', '<project>%s</project>' % saxutils.escape(project)]
         if module:
             msg.append('<module>%s</module>' % saxutils.escape(module))
         if branch:
             msg.append('<branch>%s</branch>' % saxutils.escape(branch))
         msg.append('</source>')
 
         return '\n'.join(msg)
 
     def diffstat(self):
         class patchbuf(object):
             def __init__(self):
                 self.lines = []
                 # diffstat is stupid
                 self.name = 'cia'
             def write(self, data):
                 self.lines.append(data)
             def close(self):
                 pass
 
         n = self.ctx.node()
         pbuf = patchbuf()
         patch.export(self.cia.repo, [n], fp=pbuf)
         return patch.diffstat(pbuf.lines) or ''
 
     def logmsg(self):
         diffstat = self.cia.diffstat and self.diffstat() or ''
         self.cia.ui.pushbuffer()
         self.cia.templater.show(self.ctx, changes=self.ctx.changeset(),
                                 url=self.cia.url, diffstat=diffstat)
         return self.cia.ui.popbuffer()
 
     def xml(self):
         n = short(self.ctx.node())
         src = self.sourceelem(self.cia.project, module=self.cia.module,
                               branch=self.ctx.branch())
         # unix timestamp
         dt = self.ctx.date()
         timestamp = dt[0]
 
         author = saxutils.escape(self.ctx.user())
         rev = '%d:%s' % (self.ctx.rev(), n)
         log = saxutils.escape(self.logmsg())
 
         url = self.url and '<url>%s/rev/%s</url>' % (saxutils.escape(self.url),
                                                      n) or ''
 
         msg = """
 <message>
   <generator>
     <name>Mercurial (hgcia)</name>
     <version>%s</version>
     <url>%s</url>
     <user>%s</user>
   </generator>
   %s
   <body>
     <commit>
       <author>%s</author>
       <version>%s</version>
       <log>%s</log>
       %s
       <files>%s</files>
     </commit>
   </body>
   <timestamp>%d</timestamp>
 </message>
 """ % \
             (HGCIA_VERSION, saxutils.escape(HGCIA_URL),
             saxutils.escape(self.cia.user), src, author, rev, log, url,
             self.fileelems(), timestamp)
 
         return msg
 
 
 class hgcia(object):
     """ CIA notification class """
 
     deftemplate = '{desc}'
     dstemplate = '{desc}\n-- \n{diffstat}'
 
     def __init__(self, ui, repo):
         self.ui = ui
         self.repo = repo
 
         self.ciaurl = self.ui.config('cia', 'url', 'http://cia.vc')
         self.user = self.ui.config('cia', 'user')
         self.project = self.ui.config('cia', 'project')
         self.module = self.ui.config('cia', 'module')
         self.diffstat = self.ui.configbool('cia', 'diffstat')
         self.emailfrom = self.ui.config('email', 'from')
         self.dryrun = self.ui.configbool('cia', 'test')
         self.url = self.ui.config('web', 'baseurl')
 
         style = self.ui.config('cia', 'style')
         template = self.ui.config('cia', 'template')
         if not template:
             template = self.diffstat and self.dstemplate or self.deftemplate
         template = templater.parsestring(template, quoted=False)
         t = cmdutil.changeset_templater(self.ui, self.repo, False, None,
                                         style, False)
         t.use_template(template)
         self.templater = t
 
     def sendrpc(self, msg):
         srv = xmlrpclib.Server(self.ciaurl)
         srv.hub.deliver(msg)
 
     def sendemail(self, address, data):
         p = email.Parser.Parser()
         msg = p.parsestr(data)
         msg['Date'] = util.datestr(format="%a, %d %b %Y %H:%M:%S %1%2")
         msg['To'] = address
         msg['From'] = self.emailfrom
         msg['Subject'] = 'DeliverXML'
         msg['Content-type'] = 'text/xml'
         msgtext = msg.as_string(0)
 
         self.ui.status(_('hgcia: sending update to %s\n') % address)
         mail.sendmail(self.ui, util.email(self.emailfrom),
                       [address], msgtext)
 
 
 def hook(ui, repo, hooktype, node=None, url=None, **kwargs):
     """ send CIA notification """
     def sendmsg(cia, ctx):
         msg = ciamsg(cia, ctx).xml()
         if cia.dryrun:
             ui.write(msg)
         elif cia.ciaurl.startswith('mailto:'):
             if not cia.emailfrom:
                 raise util.Abort(_('email.from must be defined when '
                                    'sending by email'))
             cia.sendemail(cia.ciaurl[7:], msg)
         else:
             cia.sendrpc(msg)
 
     n = bin(node)
     cia = hgcia(ui, repo)
     if not cia.user:
         ui.debug(_('cia: no user specified'))
         return
     if not cia.project:
         ui.debug(_('cia: no project specified'))
         return
     if hooktype == 'changegroup':
         start = repo.changelog.rev(n)
         end = len(repo.changelog)
         for rev in xrange(start, end):
             n = repo.changelog.node(rev)
             ctx = repo.changectx(n)
             sendmsg(cia, ctx)
     else:
         ctx = repo.changectx(n)
         sendmsg(cia, ctx)

hgext/hgk.py

@@ -1,346 +1,346 b''
 # Minimal support for git commands on an hg repository
 #
 # Copyright 2005, 2006 Chris Mason <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''browsing the repository in a graphical way
+'''browse the repository in a graphical way
 
 The hgk extension allows browsing the history of a repository in a
 graphical way. It requires Tcl/Tk version 8.4 or later. (Tcl/Tk is not
 distributed with Mercurial.)
 
 hgk consists of two parts: a Tcl script that does the displaying and
 querying of information, and an extension to Mercurial named hgk.py,
 which provides hooks for hgk to get information. hgk can be found in
 the contrib directory, and the extension is shipped in the hgext
 repository, and needs to be enabled.
 
 The hg view command will launch the hgk Tcl script. For this command
 to work, hgk must be in your search path. Alternately, you can specify
 the path to hgk in your .hgrc file:
 
   [hgk]
   path=/location/of/hgk
 
 hgk can make use of the extdiff extension to visualize revisions.
 Assuming you had already configured extdiff vdiff command, just add:
 
   [hgk]
   vdiff=vdiff
 
 Revisions context menu will now display additional entries to fire
 vdiff on hovered and selected revisions.'''
 
 import os
 from mercurial import commands, util, patch, revlog, cmdutil
 from mercurial.node import nullid, nullrev, short
 from mercurial.i18n import _
 
 def difftree(ui, repo, node1=None, node2=None, *files, **opts):
     """diff trees from two commits"""
     def __difftree(repo, node1, node2, files=[]):
         assert node2 is not None
         mmap = repo[node1].manifest()
         mmap2 = repo[node2].manifest()
         m = cmdutil.match(repo, files)
         modified, added, removed  = repo.status(node1, node2, m)[:3]
         empty = short(nullid)
 
         for f in modified:
             # TODO get file permissions
             ui.write(":100664 100664 %s %s M\t%s\t%s\n" %
                      (short(mmap[f]), short(mmap2[f]), f, f))
         for f in added:
             ui.write(":000000 100664 %s %s N\t%s\t%s\n" %
                      (empty, short(mmap2[f]), f, f))
         for f in removed:
             ui.write(":100664 000000 %s %s D\t%s\t%s\n" %
                      (short(mmap[f]), empty, f, f))
     ##
 
     while True:
         if opts['stdin']:
             try:
                 line = raw_input().split(' ')
                 node1 = line[0]
                 if len(line) > 1:
                     node2 = line[1]
                 else:
                     node2 = None
             except EOFError:
                 break
         node1 = repo.lookup(node1)
         if node2:
             node2 = repo.lookup(node2)
         else:
             node2 = node1
             node1 = repo.changelog.parents(node1)[0]
         if opts['patch']:
             if opts['pretty']:
                 catcommit(ui, repo, node2, "")
             m = cmdutil.match(repo, files)
             chunks = patch.diff(repo, node1, node2, match=m,
                                 opts=patch.diffopts(ui, {'git': True}))
             for chunk in chunks:
                 ui.write(chunk)
         else:
             __difftree(repo, node1, node2, files=files)
         if not opts['stdin']:
             break
 
 def catcommit(ui, repo, n, prefix, ctx=None):
     nlprefix = '\n' + prefix;
     if ctx is None:
         ctx = repo[n]
     ui.write("tree %s\n" % short(ctx.changeset()[0])) # use ctx.node() instead ??
     for p in ctx.parents():
         ui.write("parent %s\n" % p)
 
     date = ctx.date()
     description = ctx.description().replace("\0", "")
     lines = description.splitlines()
     if lines and lines[-1].startswith('committer:'):
         committer = lines[-1].split(': ')[1].rstrip()
     else:
         committer = ctx.user()
 
     ui.write("author %s %s %s\n" % (ctx.user(), int(date[0]), date[1]))
     ui.write("committer %s %s %s\n" % (committer, int(date[0]), date[1]))
     ui.write("revision %d\n" % ctx.rev())
     ui.write("branch %s\n\n" % ctx.branch())
 
     if prefix != "":
         ui.write("%s%s\n" % (prefix, description.replace('\n', nlprefix).strip()))
     else:
         ui.write(description + "\n")
     if prefix:
         ui.write('\0')
 
 def base(ui, repo, node1, node2):
     """output common ancestor information"""
     node1 = repo.lookup(node1)
     node2 = repo.lookup(node2)
     n = repo.changelog.ancestor(node1, node2)
     ui.write(short(n) + "\n")
 
 def catfile(ui, repo, type=None, r=None, **opts):
     """cat a specific revision"""
     # in stdin mode, every line except the commit is prefixed with two
     # spaces.  This way the our caller can find the commit without magic
     # strings
     #
     prefix = ""
     if opts['stdin']:
         try:
             (type, r) = raw_input().split(' ');
             prefix = "    "
         except EOFError:
             return
 
     else:
         if not type or not r:
             ui.warn(_("cat-file: type or revision not supplied\n"))
             commands.help_(ui, 'cat-file')
 
     while r:
         if type != "commit":
             ui.warn(_("aborting hg cat-file only understands commits\n"))
             return 1;
         n = repo.lookup(r)
         catcommit(ui, repo, n, prefix)
         if opts['stdin']:
             try:
                 (type, r) = raw_input().split(' ');
             except EOFError:
                 break
         else:
             break
 
 # git rev-tree is a confusing thing.  You can supply a number of
 # commit sha1s on the command line, and it walks the commit history
 # telling you which commits are reachable from the supplied ones via
 # a bitmask based on arg position.
 # you can specify a commit to stop at by starting the sha1 with ^
 def revtree(ui, args, repo, full="tree", maxnr=0, parents=False):
     def chlogwalk():
         count = len(repo)
         i = count
         l = [0] * 100
         chunk = 100
         while True:
             if chunk > i:
                 chunk = i
                 i = 0
             else:
                 i -= chunk
 
             for x in xrange(chunk):
                 if i + x >= count:
                     l[chunk - x:] = [0] * (chunk - x)
                     break
                 if full != None:
                     l[x] = repo[i + x]
                     l[x].changeset() # force reading
                 else:
                     l[x] = 1
             for x in xrange(chunk-1, -1, -1):
                 if l[x] != 0:
                     yield (i + x, full != None and l[x] or None)
             if i == 0:
                 break
 
     # calculate and return the reachability bitmask for sha
     def is_reachable(ar, reachable, sha):
         if len(ar) == 0:
             return 1
         mask = 0
         for i in xrange(len(ar)):
             if sha in reachable[i]:
                 mask |= 1 << i
 
         return mask
 
     reachable = []
     stop_sha1 = []
     want_sha1 = []
     count = 0
 
     # figure out which commits they are asking for and which ones they
     # want us to stop on
     for i, arg in enumerate(args):
         if arg.startswith('^'):
             s = repo.lookup(arg[1:])
             stop_sha1.append(s)
             want_sha1.append(s)
         elif arg != 'HEAD':
             want_sha1.append(repo.lookup(arg))
 
     # calculate the graph for the supplied commits
     for i, n in enumerate(want_sha1):
         reachable.append(set());
         visit = [n];
         reachable[i].add(n)
         while visit:
             n = visit.pop(0)
             if n in stop_sha1:
                 continue
             for p in repo.changelog.parents(n):
                 if p not in reachable[i]:
                     reachable[i].add(p)
                     visit.append(p)
                 if p in stop_sha1:
                     continue
 
     # walk the repository looking for commits that are in our
     # reachability graph
     for i, ctx in chlogwalk():
         n = repo.changelog.node(i)
         mask = is_reachable(want_sha1, reachable, n)
         if mask:
             parentstr = ""
             if parents:
                 pp = repo.changelog.parents(n)
                 if pp[0] != nullid:
                     parentstr += " " + short(pp[0])
                 if pp[1] != nullid:
                     parentstr += " " + short(pp[1])
             if not full:
                 ui.write("%s%s\n" % (short(n), parentstr))
             elif full == "commit":
                 ui.write("%s%s\n" % (short(n), parentstr))
                 catcommit(ui, repo, n, '    ', ctx)
             else:
                 (p1, p2) = repo.changelog.parents(n)
                 (h, h1, h2) = map(short, (n, p1, p2))
                 (i1, i2) = map(repo.changelog.rev, (p1, p2))
 
                 date = ctx.date()[0]
                 ui.write("%s %s:%s" % (date, h, mask))
                 mask = is_reachable(want_sha1, reachable, p1)
                 if i1 != nullrev and mask > 0:
                     ui.write("%s:%s " % (h1, mask)),
                 mask = is_reachable(want_sha1, reachable, p2)
                 if i2 != nullrev and mask > 0:
                     ui.write("%s:%s " % (h2, mask))
                 ui.write("\n")
             if maxnr and count >= maxnr:
                 break
             count += 1
 
 def revparse(ui, repo, *revs, **opts):
     """parse given revisions"""
     def revstr(rev):
         if rev == 'HEAD':
             rev = 'tip'
         return revlog.hex(repo.lookup(rev))
 
     for r in revs:
         revrange = r.split(':', 1)
         ui.write('%s\n' % revstr(revrange[0]))
         if len(revrange) == 2:
             ui.write('^%s\n' % revstr(revrange[1]))
 
 # git rev-list tries to order things by date, and has the ability to stop
 # at a given commit without walking the whole repo.  TODO add the stop
 # parameter
 def revlist(ui, repo, *revs, **opts):
     """print revisions"""
     if opts['header']:
         full = "commit"
     else:
         full = None
     copy = [x for x in revs]
     revtree(ui, copy, repo, full, opts['max_count'], opts['parents'])
 
 def config(ui, repo, **opts):
     """print extension options"""
     def writeopt(name, value):
         ui.write('k=%s\nv=%s\n' % (name, value))
 
     writeopt('vdiff', ui.config('hgk', 'vdiff', ''))
 
 
 def view(ui, repo, *etc, **opts):
     "start interactive history viewer"
     os.chdir(repo.root)
     optstr = ' '.join(['--%s %s' % (k, v) for k, v in opts.iteritems() if v])
     cmd = ui.config("hgk", "path", "hgk") + " %s %s" % (optstr, " ".join(etc))
     ui.debug(_("running %s\n") % cmd)
     util.system(cmd)
 
 cmdtable = {
     "^view":
         (view,
          [('l', 'limit', '', _('limit number of changes displayed'))],
          _('hg view [-l LIMIT] [REVRANGE]')),
     "debug-diff-tree":
         (difftree,
          [('p', 'patch', None, _('generate patch')),
           ('r', 'recursive', None, _('recursive')),
           ('P', 'pretty', None, _('pretty')),
           ('s', 'stdin', None, _('stdin')),
           ('C', 'copy', None, _('detect copies')),
           ('S', 'search', "", _('search'))],
          _('hg git-diff-tree [OPTION]... NODE1 NODE2 [FILE]...')),
     "debug-cat-file":
         (catfile,
          [('s', 'stdin', None, _('stdin'))],
          _('hg debug-cat-file [OPTION]... TYPE FILE')),
     "debug-config":
         (config, [], _('hg debug-config')),
     "debug-merge-base":
         (base, [], _('hg debug-merge-base node node')),
     "debug-rev-parse":
         (revparse,
          [('', 'default', '', _('ignored'))],
          _('hg debug-rev-parse REV')),
     "debug-rev-list":
         (revlist,
          [('H', 'header', None, _('header')),
           ('t', 'topo-order', None, _('topo-order')),
           ('p', 'parents', None, _('parents')),
           ('n', 'max-count', 0, _('max-count'))],
          _('hg debug-rev-list [options] revs')),
 }

hgext/highlight/__init__.py

@@ -1,62 +1,62 b''
 # highlight - syntax highlighting in hgweb, based on Pygments
 #
 #  Copyright 2008, 2009 Patrick Mezard <[e-mail]> and others
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 #
 # The original module was split in an interface and an implementation
 # file to defer pygments loading and speedup extension setup.
 
-"""syntax highlighting in hgweb, based on Pygments
+"""syntax highlighting for hgweb
 
 It depends on the Pygments syntax highlighting library:
 http://pygments.org/
 
 There is a single configuration option:
 
 [web]
 pygments_style = <style>
 
 The default is 'colorful'.
 
 -- Adam Hupp <[e-mail]>
 """
 
 import highlight
 from mercurial.hgweb import webcommands, webutil, common
 from mercurial import extensions, encoding
 
 def filerevision_highlight(orig, web, tmpl, fctx):
     mt = ''.join(tmpl('mimetype', encoding=encoding.encoding))
     # only pygmentize for mimetype containing 'html' so we both match
     # 'text/html' and possibly 'application/xhtml+xml' in the future
     # so that we don't have to touch the extension when the mimetype
     # for a template changes; also hgweb optimizes the case that a
     # raw file is sent using rawfile() and doesn't call us, so we
     # can't clash with the file's content-type here in case we
     # pygmentize a html file
     if 'html' in mt:
         style = web.config('web', 'pygments_style', 'colorful')
         highlight.pygmentize('fileline', fctx, style, tmpl)
     return orig(web, tmpl, fctx)
 
 def annotate_highlight(orig, web, req, tmpl):
     mt = ''.join(tmpl('mimetype', encoding=encoding.encoding))
     if 'html' in mt:
         fctx = webutil.filectx(web.repo, req)
         style = web.config('web', 'pygments_style', 'colorful')
         highlight.pygmentize('annotateline', fctx, style, tmpl)
     return orig(web, req, tmpl)
 
 def generate_css(web, req, tmpl):
     pg_style = web.config('web', 'pygments_style', 'colorful')
     fmter = highlight.HtmlFormatter(style = pg_style)
     req.respond(common.HTTP_OK, 'text/css')
     return ['/* pygments_style = %s */\n\n' % pg_style, fmter.get_style_defs('')]
 
 # monkeypatch in the new version
 extensions.wrapfunction(webcommands, '_filerevision', filerevision_highlight)
 extensions.wrapfunction(webcommands, 'annotate', annotate_highlight)
 webcommands.highlightcss = generate_css
 webcommands.__all__.append('highlightcss')

hgext/inotify/__init__.py

@@ -1,112 +1,111 b''
 # __init__.py - inotify-based status acceleration for Linux
 #
 # Copyright 2006, 2007, 2008 Bryan O'Sullivan <[e-mail]>
 # Copyright 2007, 2008 Brendan Cully <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''inotify-based status acceleration for Linux systems
-'''
+'''accelerate status report using system level services'''
 
 # todo: socket permissions
 
 from mercurial.i18n import _
 from mercurial import cmdutil, util
 import server
 from weakref import proxy
 from client import client, QueryFailed
 
 def serve(ui, repo, **opts):
     '''start an inotify server for this repository'''
     timeout = opts.get('timeout')
     if timeout:
         timeout = float(timeout) * 1e3
 
     class service(object):
         def init(self):
             try:
                 self.master = server.master(ui, repo, timeout)
             except server.AlreadyStartedException, inst:
                 raise util.Abort(str(inst))
 
         def run(self):
             try:
                 self.master.run()
             finally:
                 self.master.shutdown()
 
     service = service()
     logfile = ui.config('inotify', 'log')
     cmdutil.service(opts, initfn=service.init, runfn=service.run,
                     logfile=logfile)
 
 def debuginotify(ui, repo, **opts):
     '''debugging information for inotify extension
 
     Prints the list of directories being watched by the inotify server.
     '''
     cli = client(ui, repo)
     response = cli.debugquery()
 
     ui.write(_('directories being watched:\n'))
     for path in response:
         ui.write(('  %s/\n') % path)
 
 def reposetup(ui, repo):
     if not hasattr(repo, 'dirstate'):
         return
 
     # XXX: weakref until hg stops relying on __del__
     repo = proxy(repo)
 
     class inotifydirstate(repo.dirstate.__class__):
 
         # We'll set this to false after an unsuccessful attempt so that
         # next calls of status() within the same instance don't try again
         # to start an inotify server if it won't start.
         _inotifyon = True
 
         def status(self, match, ignored, clean, unknown=True):
             files = match.files()
             if '.' in files:
                 files = []
             if self._inotifyon and not ignored:
                 cli = client(ui, repo)
                 try:
                     result = cli.statusquery(files, match, False,
                                             clean, unknown)
                 except QueryFailed, instr:
                     ui.debug(str(instr))
                     # don't retry within the same hg instance
                     inotifydirstate._inotifyon = False
                     pass
                 else:
                     if ui.config('inotify', 'debug'):
                         r2 = super(inotifydirstate, self).status(
                             match, False, clean, unknown)
                         for c,a,b in zip('LMARDUIC', result, r2):
                             for f in a:
                                 if f not in b:
                                     ui.warn('*** inotify: %s +%s\n' % (c, f))
                             for f in b:
                                 if f not in a:
                                     ui.warn('*** inotify: %s -%s\n' % (c, f))
                         result = r2
                     return result
             return super(inotifydirstate, self).status(
                 match, ignored, clean, unknown)
 
     repo.dirstate.__class__ = inotifydirstate
 
 cmdtable = {
     'debuginotify':
         (debuginotify, [], ('hg debuginotify')),
     '^inserve':
         (serve,
          [('d', 'daemon', None, _('run server in background')),
           ('', 'daemon-pipefds', '', _('used internally by daemon mode')),
           ('t', 'idle-timeout', '', _('minutes to sit idle before exiting')),
           ('', 'pid-file', '', _('name of file to write process ID to'))],
          _('hg inserve [OPT]...')),
     }

hgext/keyword.py

@@ -1,528 +1,528 b''
 # keyword.py - $Keyword$ expansion for Mercurial
 #
 # Copyright 2007, 2008 Christian Ebert <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 #
 # $Id$
 #
 # Keyword expansion hack against the grain of a DSCM
 #
 # There are many good reasons why this is not needed in a distributed
 # SCM, still it may be useful in very small projects based on single
 # files (like LaTeX packages), that are mostly addressed to an
 # audience not running a version control system.
 #
 # For in-depth discussion refer to
 # <http://www.selenic.com/mercurial/wiki/index.cgi/KeywordPlan>.
 #
 # Keyword expansion is based on Mercurial's changeset template mappings.
 #
 # Binary files are not touched.
 #
 # Files to act upon/ignore are specified in the [keyword] section.
 # Customized keyword template mappings in the [keywordmaps] section.
 #
 # Run "hg help keyword" and "hg kwdemo" to get info on configuration.
 
-'''keyword expansion in tracked files
+'''expand keywords in tracked files
 
 This extension expands RCS/CVS-like or self-customized $Keywords$ in
 tracked text files selected by your configuration.
 
 Keywords are only expanded in local repositories and not stored in the
 change history. The mechanism can be regarded as a convenience for the
 current user or for archive distribution.
 
 Configuration is done in the [keyword] and [keywordmaps] sections of
 hgrc files.
 
 Example:
 
     [keyword]
     # expand keywords in every python file except those matching "x*"
     **.py =
     x*    = ignore
 
 Note: the more specific you are in your filename patterns
       the less you lose speed in huge repositories.
 
 For [keywordmaps] template mapping and expansion demonstration and
 control run "hg kwdemo".
 
 An additional date template filter {date|utcdate} is provided.
 
 The default template mappings (view with "hg kwdemo -d") can be
 replaced with customized keywords and templates. Again, run "hg
 kwdemo" to control the results of your config changes.
 
 Before changing/disabling active keywords, run "hg kwshrink" to avoid
 the risk of inadvertently storing expanded keywords in the change
 history.
 
 To force expansion after enabling it, or a configuration change, run
 "hg kwexpand".
 
 Also, when committing with the record extension or using mq's qrecord,
 be aware that keywords cannot be updated. Again, run "hg kwexpand" on
 the files in question to update keyword expansions after all changes
 have been checked in.
 
 Expansions spanning more than one line and incremental expansions,
 like CVS' $Log$, are not supported. A keyword template map
 "Log = {desc}" expands to the first line of the changeset description.
 '''
 
 from mercurial import commands, cmdutil, dispatch, filelog, revlog, extensions
 from mercurial import patch, localrepo, templater, templatefilters, util, match
 from mercurial.hgweb import webcommands
 from mercurial.lock import release
 from mercurial.node import nullid, hex
 from mercurial.i18n import _
 import re, shutil, tempfile, time
 
 commands.optionalrepo += ' kwdemo'
 
 # hg commands that do not act on keywords
 nokwcommands = ('add addremove annotate bundle copy export grep incoming init'
                 ' log outgoing push rename rollback tip verify'
                 ' convert email glog')
 
 # hg commands that trigger expansion only when writing to working dir,
 # not when reading filelog, and unexpand when reading from working dir
 restricted = 'merge record resolve qfold qimport qnew qpush qrefresh qrecord'
 
 def utcdate(date):
     '''Returns hgdate in cvs-like UTC format.'''
     return time.strftime('%Y/%m/%d %H:%M:%S', time.gmtime(date[0]))
 
 # make keyword tools accessible
 kwtools = {'templater': None, 'hgcmd': '', 'inc': [], 'exc': ['.hg*']}
 
 
 class kwtemplater(object):
     '''
     Sets up keyword templates, corresponding keyword regex, and
     provides keyword substitution functions.
     '''
     templates = {
         'Revision': '{node|short}',
         'Author': '{author|user}',
         'Date': '{date|utcdate}',
         'RCSFile': '{file|basename},v',
         'Source': '{root}/{file},v',
         'Id': '{file|basename},v {node|short} {date|utcdate} {author|user}',
         'Header': '{root}/{file},v {node|short} {date|utcdate} {author|user}',
     }
 
     def __init__(self, ui, repo):
         self.ui = ui
         self.repo = repo
         self.match = match.match(repo.root, '', [],
                                  kwtools['inc'], kwtools['exc'])
         self.restrict = kwtools['hgcmd'] in restricted.split()
 
         kwmaps = self.ui.configitems('keywordmaps')
         if kwmaps: # override default templates
             kwmaps = [(k, templater.parsestring(v, False))
                       for (k, v) in kwmaps]
             self.templates = dict(kwmaps)
         escaped = map(re.escape, self.templates.keys())
         kwpat = r'\$(%s)(: [^$\n\r]*? )??\$' % '|'.join(escaped)
         self.re_kw = re.compile(kwpat)
 
         templatefilters.filters['utcdate'] = utcdate
         self.ct = cmdutil.changeset_templater(self.ui, self.repo,
                                               False, None, '', False)
 
     def substitute(self, data, path, ctx, subfunc):
         '''Replaces keywords in data with expanded template.'''
         def kwsub(mobj):
             kw = mobj.group(1)
             self.ct.use_template(self.templates[kw])
             self.ui.pushbuffer()
             self.ct.show(ctx, root=self.repo.root, file=path)
             ekw = templatefilters.firstline(self.ui.popbuffer())
             return '$%s: %s $' % (kw, ekw)
         return subfunc(kwsub, data)
 
     def expand(self, path, node, data):
         '''Returns data with keywords expanded.'''
         if not self.restrict and self.match(path) and not util.binary(data):
             ctx = self.repo.filectx(path, fileid=node).changectx()
             return self.substitute(data, path, ctx, self.re_kw.sub)
         return data
 
     def iskwfile(self, path, flagfunc):
         '''Returns true if path matches [keyword] pattern
         and is not a symbolic link.
         Caveat: localrepository._link fails on Windows.'''
         return self.match(path) and not 'l' in flagfunc(path)
 
     def overwrite(self, node, expand, files):
         '''Overwrites selected files expanding/shrinking keywords.'''
         ctx = self.repo[node]
         mf = ctx.manifest()
         if node is not None:     # commit
             files = [f for f in ctx.files() if f in mf]
             notify = self.ui.debug
         else:                    # kwexpand/kwshrink
             notify = self.ui.note
         candidates = [f for f in files if self.iskwfile(f, ctx.flags)]
         if candidates:
             self.restrict = True # do not expand when reading
             msg = (expand and _('overwriting %s expanding keywords\n')
                    or _('overwriting %s shrinking keywords\n'))
             for f in candidates:
                 fp = self.repo.file(f)
                 data = fp.read(mf[f])
                 if util.binary(data):
                     continue
                 if expand:
                     if node is None:
                         ctx = self.repo.filectx(f, fileid=mf[f]).changectx()
                     data, found = self.substitute(data, f, ctx,
                                                   self.re_kw.subn)
                 else:
                     found = self.re_kw.search(data)
                 if found:
                     notify(msg % f)
                     self.repo.wwrite(f, data, mf.flags(f))
                     self.repo.dirstate.normal(f)
             self.restrict = False
 
     def shrinktext(self, text):
         '''Unconditionally removes all keyword substitutions from text.'''
         return self.re_kw.sub(r'$\1$', text)
 
     def shrink(self, fname, text):
         '''Returns text with all keyword substitutions removed.'''
         if self.match(fname) and not util.binary(text):
             return self.shrinktext(text)
         return text
 
     def shrinklines(self, fname, lines):
         '''Returns lines with keyword substitutions removed.'''
         if self.match(fname):
             text = ''.join(lines)
             if not util.binary(text):
                 return self.shrinktext(text).splitlines(True)
         return lines
 
     def wread(self, fname, data):
         '''If in restricted mode returns data read from wdir with
         keyword substitutions removed.'''
         return self.restrict and self.shrink(fname, data) or data
 
 class kwfilelog(filelog.filelog):
     '''
     Subclass of filelog to hook into its read, add, cmp methods.
     Keywords are "stored" unexpanded, and processed on reading.
     '''
     def __init__(self, opener, kwt, path):
         super(kwfilelog, self).__init__(opener, path)
         self.kwt = kwt
         self.path = path
 
     def read(self, node):
         '''Expands keywords when reading filelog.'''
         data = super(kwfilelog, self).read(node)
         return self.kwt.expand(self.path, node, data)
 
     def add(self, text, meta, tr, link, p1=None, p2=None):
         '''Removes keyword substitutions when adding to filelog.'''
         text = self.kwt.shrink(self.path, text)
         return super(kwfilelog, self).add(text, meta, tr, link, p1, p2)
 
     def cmp(self, node, text):
         '''Removes keyword substitutions for comparison.'''
         text = self.kwt.shrink(self.path, text)
         if self.renamed(node):
             t2 = super(kwfilelog, self).read(node)
             return t2 != text
         return revlog.revlog.cmp(self, node, text)
 
 def _status(ui, repo, kwt, unknown, *pats, **opts):
     '''Bails out if [keyword] configuration is not active.
     Returns status of working directory.'''
     if kwt:
         match = cmdutil.match(repo, pats, opts)
         return repo.status(match=match, unknown=unknown, clean=True)
     if ui.configitems('keyword'):
         raise util.Abort(_('[keyword] patterns cannot match'))
     raise util.Abort(_('no [keyword] patterns configured'))
 
 def _kwfwrite(ui, repo, expand, *pats, **opts):
     '''Selects files and passes them to kwtemplater.overwrite.'''
     if repo.dirstate.parents()[1] != nullid:
         raise util.Abort(_('outstanding uncommitted merge'))
     kwt = kwtools['templater']
     status = _status(ui, repo, kwt, False, *pats, **opts)
     modified, added, removed, deleted = status[:4]
     if modified or added or removed or deleted:
         raise util.Abort(_('outstanding uncommitted changes'))
     wlock = lock = None
     try:
         wlock = repo.wlock()
         lock = repo.lock()
         kwt.overwrite(None, expand, status[6])
     finally:
         release(lock, wlock)
 
 def demo(ui, repo, *args, **opts):
     '''print [keywordmaps] configuration and an expansion example
 
     Show current, custom, or default keyword template maps and their
     expansions.
 
     Extend current configuration by specifying maps as arguments and
     optionally by reading from an additional hgrc file.
 
     Override current keyword template maps with "default" option.
     '''
     def demostatus(stat):
         ui.status(_('\n\t%s\n') % stat)
 
     def demoitems(section, items):
         ui.write('[%s]\n' % section)
         for k, v in items:
             ui.write('%s = %s\n' % (k, v))
 
     msg = 'hg keyword config and expansion example'
     kwstatus = 'current'
     fn = 'demo.txt'
     branchname = 'demobranch'
     tmpdir = tempfile.mkdtemp('', 'kwdemo.')
     ui.note(_('creating temporary repository at %s\n') % tmpdir)
     repo = localrepo.localrepository(ui, tmpdir, True)
     ui.setconfig('keyword', fn, '')
     if args or opts.get('rcfile'):
         kwstatus = 'custom'
     if opts.get('rcfile'):
         ui.readconfig(opts.get('rcfile'))
     if opts.get('default'):
         kwstatus = 'default'
         kwmaps = kwtemplater.templates
         if ui.configitems('keywordmaps'):
             # override maps from optional rcfile
             for k, v in kwmaps.iteritems():
                 ui.setconfig('keywordmaps', k, v)
     elif args:
         # simulate hgrc parsing
         rcmaps = ['[keywordmaps]\n'] + [a + '\n' for a in args]
         fp = repo.opener('hgrc', 'w')
         fp.writelines(rcmaps)
         fp.close()
         ui.readconfig(repo.join('hgrc'))
     if not opts.get('default'):
         kwmaps = dict(ui.configitems('keywordmaps')) or kwtemplater.templates
     uisetup(ui)
     reposetup(ui, repo)
     for k, v in ui.configitems('extensions'):
         if k.endswith('keyword'):
             extension = '%s = %s' % (k, v)
             break
     demostatus('config using %s keyword template maps' % kwstatus)
     ui.write('[extensions]\n%s\n' % extension)
     demoitems('keyword', ui.configitems('keyword'))
     demoitems('keywordmaps', kwmaps.iteritems())
     keywords = '$' + '$\n$'.join(kwmaps.keys()) + '$\n'
     repo.wopener(fn, 'w').write(keywords)
     repo.add([fn])
     path = repo.wjoin(fn)
     ui.note(_('\n%s keywords written to %s:\n') % (kwstatus, path))
     ui.note(keywords)
     ui.note('\nhg -R "%s" branch "%s"\n' % (tmpdir, branchname))
     # silence branch command if not verbose
     quiet = ui.quiet
     ui.quiet = not ui.verbose
     commands.branch(ui, repo, branchname)
     ui.quiet = quiet
     for name, cmd in ui.configitems('hooks'):
         if name.split('.', 1)[0].find('commit') > -1:
             repo.ui.setconfig('hooks', name, '')
     ui.note(_('unhooked all commit hooks\n'))
     ui.note('hg -R "%s" ci -m "%s"\n' % (tmpdir, msg))
     repo.commit(text=msg)
     fmt = ui.verbose and ' in %s' % path or ''
     demostatus('%s keywords expanded%s' % (kwstatus, fmt))
     ui.write(repo.wread(fn))
     ui.debug(_('\nremoving temporary repository %s\n') % tmpdir)
     shutil.rmtree(tmpdir, ignore_errors=True)
 
 def expand(ui, repo, *pats, **opts):
     '''expand keywords in the working directory
 
     Run after (re)enabling keyword expansion.
 
     kwexpand refuses to run if given files contain local changes.
     '''
     # 3rd argument sets expansion to True
     _kwfwrite(ui, repo, True, *pats, **opts)
 
 def files(ui, repo, *pats, **opts):
     '''print files currently configured for keyword expansion
 
     Crosscheck which files in working directory are potential targets
     for keyword expansion. That is, files matched by [keyword] config
     patterns but not symlinks.
     '''
     kwt = kwtools['templater']
     status = _status(ui, repo, kwt, opts.get('untracked'), *pats, **opts)
     modified, added, removed, deleted, unknown, ignored, clean = status
     files = sorted(modified + added + clean + unknown)
     wctx = repo[None]
     kwfiles = [f for f in files if kwt.iskwfile(f, wctx.flags)]
     cwd = pats and repo.getcwd() or ''
     kwfstats = not opts.get('ignore') and (('K', kwfiles),) or ()
     if opts.get('all') or opts.get('ignore'):
         kwfstats += (('I', [f for f in files if f not in kwfiles]),)
     for char, filenames in kwfstats:
         fmt = (opts.get('all') or ui.verbose) and '%s %%s\n' % char or '%s\n'
         for f in filenames:
             ui.write(fmt % repo.pathto(f, cwd))
 
 def shrink(ui, repo, *pats, **opts):
     '''revert expanded keywords in the working directory
 
     Run before changing/disabling active keywords or if you experience
     problems with "hg import" or "hg merge".
 
     kwshrink refuses to run if given files contain local changes.
     '''
     # 3rd argument sets expansion to False
     _kwfwrite(ui, repo, False, *pats, **opts)
 
 
 def uisetup(ui):
     '''Collects [keyword] config in kwtools.
     Monkeypatches dispatch._parse if needed.'''
 
     for pat, opt in ui.configitems('keyword'):
         if opt != 'ignore':
             kwtools['inc'].append(pat)
         else:
             kwtools['exc'].append(pat)
 
     if kwtools['inc']:
         def kwdispatch_parse(orig, ui, args):
             '''Monkeypatch dispatch._parse to obtain running hg command.'''
             cmd, func, args, options, cmdoptions = orig(ui, args)
             kwtools['hgcmd'] = cmd
             return cmd, func, args, options, cmdoptions
 
         extensions.wrapfunction(dispatch, '_parse', kwdispatch_parse)
 
 def reposetup(ui, repo):
     '''Sets up repo as kwrepo for keyword substitution.
     Overrides file method to return kwfilelog instead of filelog
     if file matches user configuration.
     Wraps commit to overwrite configured files with updated
     keyword substitutions.
     Monkeypatches patch and webcommands.'''
 
     try:
         if (not repo.local() or not kwtools['inc']
             or kwtools['hgcmd'] in nokwcommands.split()
             or '.hg' in util.splitpath(repo.root)
             or repo._url.startswith('bundle:')):
             return
     except AttributeError:
         pass
 
     kwtools['templater'] = kwt = kwtemplater(ui, repo)
 
     class kwrepo(repo.__class__):
         def file(self, f):
             if f[0] == '/':
                 f = f[1:]
             return kwfilelog(self.sopener, kwt, f)
 
         def wread(self, filename):
             data = super(kwrepo, self).wread(filename)
             return kwt.wread(filename, data)
 
         def commit(self, text='', user=None, date=None, match=None,
                    force=False, editor=None, extra={}):
             wlock = lock = None
             _p1 = _p2 = None
             try:
                 wlock = self.wlock()
                 lock = self.lock()
                 # store and postpone commit hooks
                 commithooks = {}
                 for name, cmd in ui.configitems('hooks'):
                     if name.split('.', 1)[0] == 'commit':
                         commithooks[name] = cmd
                         ui.setconfig('hooks', name, None)
                 if commithooks:
                     # store parents for commit hook environment
                     _p1, _p2 = repo.dirstate.parents()
                     _p1 = hex(_p1)
                     if _p2 == nullid:
                         _p2 = ''
                     else:
                         _p2 = hex(_p2)
 
                 n = super(kwrepo, self).commit(text, user, date, match, force,
                                                editor, extra)
 
                 # restore commit hooks
                 for name, cmd in commithooks.iteritems():
                     ui.setconfig('hooks', name, cmd)
                 if n is not None:
                     kwt.overwrite(n, True, None)
                     repo.hook('commit', node=n, parent1=_p1, parent2=_p2)
                 return n
             finally:
                 release(lock, wlock)
 
     # monkeypatches
     def kwpatchfile_init(orig, self, ui, fname, opener, missing=False, eol=None):
         '''Monkeypatch/wrap patch.patchfile.__init__ to avoid
         rejects or conflicts due to expanded keywords in working dir.'''
         orig(self, ui, fname, opener, missing, eol)
         # shrink keywords read from working dir
         self.lines = kwt.shrinklines(self.fname, self.lines)
 
     def kw_diff(orig, repo, node1=None, node2=None, match=None, changes=None,
                 opts=None):
         '''Monkeypatch patch.diff to avoid expansion except when
         comparing against working dir.'''
         if node2 is not None:
             kwt.match = util.never
         elif node1 is not None and node1 != repo['.'].node():
             kwt.restrict = True
         return orig(repo, node1, node2, match, changes, opts)
 
     def kwweb_skip(orig, web, req, tmpl):
         '''Wraps webcommands.x turning off keyword expansion.'''
         kwt.match = util.never
         return orig(web, req, tmpl)
 
     repo.__class__ = kwrepo
 
     extensions.wrapfunction(patch.patchfile, '__init__', kwpatchfile_init)
     extensions.wrapfunction(patch, 'diff', kw_diff)
     for c in 'annotate changeset rev filediff diff'.split():
         extensions.wrapfunction(webcommands, c, kwweb_skip)
 
 cmdtable = {
     'kwdemo':
         (demo,
          [('d', 'default', None, _('show default keyword template maps')),
           ('f', 'rcfile', [], _('read maps from rcfile'))],
          _('hg kwdemo [-d] [-f RCFILE] [TEMPLATEMAP]...')),
     'kwexpand': (expand, commands.walkopts,
                  _('hg kwexpand [OPTION]... [FILE]...')),
     'kwfiles':
         (files,
          [('a', 'all', None, _('show keyword status flags of all files')),
           ('i', 'ignore', None, _('show files excluded from expansion')),
           ('u', 'untracked', None, _('additionally show untracked files')),
          ] + commands.walkopts,
          _('hg kwfiles [OPTION]... [FILE]...')),
     'kwshrink': (shrink, commands.walkopts,
                  _('hg kwshrink [OPTION]... [FILE]...')),
 }

hgext/mq.py

@@ -1,2630 +1,2630 b''
 # mq.py - patch queues for mercurial
 #
 # Copyright 2005, 2006 Chris Mason <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''patch management and development
+'''work with a stack of patches
 
 This extension lets you work with a stack of patches in a Mercurial
 repository. It manages two stacks of patches - all known patches, and
 applied patches (subset of known patches).
 
 Known patches are represented as patch files in the .hg/patches
 directory. Applied patches are both patch files and changesets.
 
 Common tasks (use "hg help command" for more details):
 
 prepare repository to work with patches   qinit
 create new patch                          qnew
 import existing patch                     qimport
 
 print patch series                        qseries
 print applied patches                     qapplied
 print name of top applied patch           qtop
 
 add known patch to applied stack          qpush
 remove patch from applied stack           qpop
 refresh contents of top applied patch     qrefresh
 '''
 
 from mercurial.i18n import _
 from mercurial.node import bin, hex, short, nullid, nullrev
 from mercurial.lock import release
 from mercurial import commands, cmdutil, hg, patch, util
 from mercurial import repair, extensions, url, error
 import os, sys, re, errno
 
 commands.norepo += " qclone"
 
 # Patch names looks like unix-file names.
 # They must be joinable with queue directory and result in the patch path.
 normname = util.normpath
 
 class statusentry(object):
     def __init__(self, rev, name=None):
         if not name:
             fields = rev.split(':', 1)
             if len(fields) == 2:
                 self.rev, self.name = fields
             else:
                 self.rev, self.name = None, None
         else:
             self.rev, self.name = rev, name
 
     def __str__(self):
         return self.rev + ':' + self.name
 
 class patchheader(object):
     def __init__(self, pf):
         def eatdiff(lines):
             while lines:
                 l = lines[-1]
                 if (l.startswith("diff -") or
                     l.startswith("Index:") or
                     l.startswith("===========")):
                     del lines[-1]
                 else:
                     break
         def eatempty(lines):
             while lines:
                 l = lines[-1]
                 if re.match('\s*$', l):
                     del lines[-1]
                 else:
                     break
 
         message = []
         comments = []
         user = None
         date = None
         format = None
         subject = None
         diffstart = 0
 
         for line in file(pf):
             line = line.rstrip()
             if line.startswith('diff --git'):
                 diffstart = 2
                 break
             if diffstart:
                 if line.startswith('+++ '):
                     diffstart = 2
                 break
             if line.startswith("--- "):
                 diffstart = 1
                 continue
             elif format == "hgpatch":
                 # parse values when importing the result of an hg export
                 if line.startswith("# User "):
                     user = line[7:]
                 elif line.startswith("# Date "):
                     date = line[7:]
                 elif not line.startswith("# ") and line:
                     message.append(line)
                     format = None
             elif line == '# HG changeset patch':
                 format = "hgpatch"
             elif (format != "tagdone" and (line.startswith("Subject: ") or
                                            line.startswith("subject: "))):
                 subject = line[9:]
                 format = "tag"
             elif (format != "tagdone" and (line.startswith("From: ") or
                                            line.startswith("from: "))):
                 user = line[6:]
                 format = "tag"
             elif format == "tag" and line == "":
                 # when looking for tags (subject: from: etc) they
                 # end once you find a blank line in the source
                 format = "tagdone"
             elif message or line:
                 message.append(line)
             comments.append(line)
 
         eatdiff(message)
         eatdiff(comments)
         eatempty(message)
         eatempty(comments)
 
         # make sure message isn't empty
         if format and format.startswith("tag") and subject:
             message.insert(0, "")
             message.insert(0, subject)
 
         self.message = message
         self.comments = comments
         self.user = user
         self.date = date
         self.haspatch = diffstart > 1
 
     def setuser(self, user):
         if not self.updateheader(['From: ', '# User '], user):
             try:
                 patchheaderat = self.comments.index('# HG changeset patch')
                 self.comments.insert(patchheaderat + 1,'# User ' + user)
             except ValueError:
                 self.comments = ['From: ' + user, ''] + self.comments
         self.user = user
 
     def setdate(self, date):
         if self.updateheader(['# Date '], date):
             self.date = date
 
     def setmessage(self, message):
         if self.comments:
             self._delmsg()
         self.message = [message]
         self.comments += self.message
 
     def updateheader(self, prefixes, new):
         '''Update all references to a field in the patch header.
         Return whether the field is present.'''
         res = False
         for prefix in prefixes:
             for i in xrange(len(self.comments)):
                 if self.comments[i].startswith(prefix):
                     self.comments[i] = prefix + new
                     res = True
                     break
         return res
 
     def __str__(self):
         if not self.comments:
             return ''
         return '\n'.join(self.comments) + '\n\n'
 
     def _delmsg(self):
         '''Remove existing message, keeping the rest of the comments fields.
         If comments contains 'subject: ', message will prepend
         the field and a blank line.'''
         if self.message:
             subj = 'subject: ' + self.message[0].lower()
             for i in xrange(len(self.comments)):
                 if subj == self.comments[i].lower():
                     del self.comments[i]
                     self.message = self.message[2:]
                     break
         ci = 0
         for mi in self.message:
             while mi != self.comments[ci]:
                 ci += 1
             del self.comments[ci]
 
 class queue(object):
     def __init__(self, ui, path, patchdir=None):
         self.basepath = path
         self.path = patchdir or os.path.join(path, "patches")
         self.opener = util.opener(self.path)
         self.ui = ui
         self.applied_dirty = 0
         self.series_dirty = 0
         self.series_path = "series"
         self.status_path = "status"
         self.guards_path = "guards"
         self.active_guards = None
         self.guards_dirty = False
         self._diffopts = None
 
     @util.propertycache
     def applied(self):
         if os.path.exists(self.join(self.status_path)):
             lines = self.opener(self.status_path).read().splitlines()
             return [statusentry(l) for l in lines]
         return []
 
     @util.propertycache
     def full_series(self):
         if os.path.exists(self.join(self.series_path)):
             return self.opener(self.series_path).read().splitlines()
         return []
 
     @util.propertycache
     def series(self):
         self.parse_series()
         return self.series
 
     @util.propertycache
     def series_guards(self):
         self.parse_series()
         return self.series_guards
 
     def invalidate(self):
         for a in 'applied full_series series series_guards'.split():
             if a in self.__dict__:
                 delattr(self, a)
         self.applied_dirty = 0
         self.series_dirty = 0
         self.guards_dirty = False
         self.active_guards = None
 
     def diffopts(self):
         if self._diffopts is None:
             self._diffopts = patch.diffopts(self.ui)
         return self._diffopts
 
     def join(self, *p):
         return os.path.join(self.path, *p)
 
     def find_series(self, patch):
         pre = re.compile("(\s*)([^#]+)")
         index = 0
         for l in self.full_series:
             m = pre.match(l)
             if m:
                 s = m.group(2)
                 s = s.rstrip()
                 if s == patch:
                     return index
             index += 1
         return None
 
     guard_re = re.compile(r'\s?#([-+][^-+# \t\r\n\f][^# \t\r\n\f]*)')
 
     def parse_series(self):
         self.series = []
         self.series_guards = []
         for l in self.full_series:
             h = l.find('#')
             if h == -1:
                 patch = l
                 comment = ''
             elif h == 0:
                 continue
             else:
                 patch = l[:h]
                 comment = l[h:]
             patch = patch.strip()
             if patch:
                 if patch in self.series:
                     raise util.Abort(_('%s appears more than once in %s') %
                                      (patch, self.join(self.series_path)))
                 self.series.append(patch)
                 self.series_guards.append(self.guard_re.findall(comment))
 
     def check_guard(self, guard):
         if not guard:
             return _('guard cannot be an empty string')
         bad_chars = '# \t\r\n\f'
         first = guard[0]
         if first in '-+':
             return (_('guard %r starts with invalid character: %r') %
                       (guard, first))
         for c in bad_chars:
             if c in guard:
                 return _('invalid character in guard %r: %r') % (guard, c)
 
     def set_active(self, guards):
         for guard in guards:
             bad = self.check_guard(guard)
             if bad:
                 raise util.Abort(bad)
         guards = sorted(set(guards))
         self.ui.debug(_('active guards: %s\n') % ' '.join(guards))
         self.active_guards = guards
         self.guards_dirty = True
 
     def active(self):
         if self.active_guards is None:
             self.active_guards = []
             try:
                 guards = self.opener(self.guards_path).read().split()
             except IOError, err:
                 if err.errno != errno.ENOENT: raise
                 guards = []
             for i, guard in enumerate(guards):
                 bad = self.check_guard(guard)
                 if bad:
                     self.ui.warn('%s:%d: %s\n' %
                                  (self.join(self.guards_path), i + 1, bad))
                 else:
                     self.active_guards.append(guard)
         return self.active_guards
 
     def set_guards(self, idx, guards):
         for g in guards:
             if len(g) < 2:
                 raise util.Abort(_('guard %r too short') % g)
             if g[0] not in '-+':
                 raise util.Abort(_('guard %r starts with invalid char') % g)
             bad = self.check_guard(g[1:])
             if bad:
                 raise util.Abort(bad)
         drop = self.guard_re.sub('', self.full_series[idx])
         self.full_series[idx] = drop + ''.join([' #' + g for g in guards])
         self.parse_series()
         self.series_dirty = True
 
     def pushable(self, idx):
         if isinstance(idx, str):
             idx = self.series.index(idx)
         patchguards = self.series_guards[idx]
         if not patchguards:
             return True, None
         guards = self.active()
         exactneg = [g for g in patchguards if g[0] == '-' and g[1:] in guards]
         if exactneg:
             return False, exactneg[0]
         pos = [g for g in patchguards if g[0] == '+']
         exactpos = [g for g in pos if g[1:] in guards]
         if pos:
             if exactpos:
                 return True, exactpos[0]
             return False, pos
         return True, ''
 
     def explain_pushable(self, idx, all_patches=False):
         write = all_patches and self.ui.write or self.ui.warn
         if all_patches or self.ui.verbose:
             if isinstance(idx, str):
                 idx = self.series.index(idx)
             pushable, why = self.pushable(idx)
             if all_patches and pushable:
                 if why is None:
                     write(_('allowing %s - no guards in effect\n') %
                           self.series[idx])
                 else:
                     if not why:
                         write(_('allowing %s - no matching negative guards\n') %
                               self.series[idx])
                     else:
                         write(_('allowing %s - guarded by %r\n') %
                               (self.series[idx], why))
             if not pushable:
                 if why:
                     write(_('skipping %s - guarded by %r\n') %
                           (self.series[idx], why))
                 else:
                     write(_('skipping %s - no matching guards\n') %
                           self.series[idx])
 
     def save_dirty(self):
         def write_list(items, path):
             fp = self.opener(path, 'w')
             for i in items:
                 fp.write("%s\n" % i)
             fp.close()
         if self.applied_dirty: write_list(map(str, self.applied), self.status_path)
         if self.series_dirty: write_list(self.full_series, self.series_path)
         if self.guards_dirty: write_list(self.active_guards, self.guards_path)
 
     def removeundo(self, repo):
         undo = repo.sjoin('undo')
         if not os.path.exists(undo):
             return
         try:
             os.unlink(undo)
         except OSError, inst:
             self.ui.warn(_('error removing undo: %s\n') % str(inst))
 
     def printdiff(self, repo, node1, node2=None, files=None,
                   fp=None, changes=None, opts={}):
         m = cmdutil.match(repo, files, opts)
         chunks = patch.diff(repo, node1, node2, m, changes, self.diffopts())
         write = fp is None and repo.ui.write or fp.write
         for chunk in chunks:
             write(chunk)
 
     def mergeone(self, repo, mergeq, head, patch, rev):
         # first try just applying the patch
         (err, n) = self.apply(repo, [ patch ], update_status=False,
                               strict=True, merge=rev)
 
         if err == 0:
             return (err, n)
 
         if n is None:
             raise util.Abort(_("apply failed for patch %s") % patch)
 
         self.ui.warn(_("patch didn't work out, merging %s\n") % patch)
 
         # apply failed, strip away that rev and merge.
         hg.clean(repo, head)
         self.strip(repo, n, update=False, backup='strip')
 
         ctx = repo[rev]
         ret = hg.merge(repo, rev)
         if ret:
             raise util.Abort(_("update returned %d") % ret)
         n = repo.commit(ctx.description(), ctx.user(), force=True)
         if n is None:
             raise util.Abort(_("repo commit failed"))
         try:
             ph = patchheader(mergeq.join(patch))
         except:
             raise util.Abort(_("unable to read %s") % patch)
 
         patchf = self.opener(patch, "w")
         comments = str(ph)
         if comments:
             patchf.write(comments)
         self.printdiff(repo, head, n, fp=patchf)
         patchf.close()
         self.removeundo(repo)
         return (0, n)
 
     def qparents(self, repo, rev=None):
         if rev is None:
             (p1, p2) = repo.dirstate.parents()
             if p2 == nullid:
                 return p1
             if len(self.applied) == 0:
                 return None
             return bin(self.applied[-1].rev)
         pp = repo.changelog.parents(rev)
         if pp[1] != nullid:
             arevs = [ x.rev for x in self.applied ]
             p0 = hex(pp[0])
             p1 = hex(pp[1])
             if p0 in arevs:
                 return pp[0]
             if p1 in arevs:
                 return pp[1]
         return pp[0]
 
     def mergepatch(self, repo, mergeq, series):
         if len(self.applied) == 0:
             # each of the patches merged in will have two parents.  This
             # can confuse the qrefresh, qdiff, and strip code because it
             # needs to know which parent is actually in the patch queue.
             # so, we insert a merge marker with only one parent.  This way
             # the first patch in the queue is never a merge patch
             #
             pname = ".hg.patches.merge.marker"
             n = repo.commit('[mq]: merge marker', force=True)
             self.removeundo(repo)
             self.applied.append(statusentry(hex(n), pname))
             self.applied_dirty = 1
 
         head = self.qparents(repo)
 
         for patch in series:
             patch = mergeq.lookup(patch, strict=True)
             if not patch:
                 self.ui.warn(_("patch %s does not exist\n") % patch)
                 return (1, None)
             pushable, reason = self.pushable(patch)
             if not pushable:
                 self.explain_pushable(patch, all_patches=True)
                 continue
             info = mergeq.isapplied(patch)
             if not info:
                 self.ui.warn(_("patch %s is not applied\n") % patch)
                 return (1, None)
             rev = bin(info[1])
             (err, head) = self.mergeone(repo, mergeq, head, patch, rev)
             if head:
                 self.applied.append(statusentry(hex(head), patch))
                 self.applied_dirty = 1
             if err:
                 return (err, head)
         self.save_dirty()
         return (0, head)
 
     def patch(self, repo, patchfile):
         '''Apply patchfile  to the working directory.
         patchfile: name of patch file'''
         files = {}
         try:
             fuzz = patch.patch(patchfile, self.ui, strip=1, cwd=repo.root,
                                files=files, eolmode=None)
         except Exception, inst:
             self.ui.note(str(inst) + '\n')
             if not self.ui.verbose:
                 self.ui.warn(_("patch failed, unable to continue (try -v)\n"))
             return (False, files, False)
 
         return (True, files, fuzz)
 
     def apply(self, repo, series, list=False, update_status=True,
               strict=False, patchdir=None, merge=None, all_files={}):
         wlock = lock = tr = None
         try:
             wlock = repo.wlock()
             lock = repo.lock()
             tr = repo.transaction()
             try:
                 ret = self._apply(repo, series, list, update_status,
                                   strict, patchdir, merge, all_files=all_files)
                 tr.close()
                 self.save_dirty()
                 return ret
             except:
                 try:
                     tr.abort()
                 finally:
                     repo.invalidate()
                     repo.dirstate.invalidate()
                 raise
         finally:
             del tr
             release(lock, wlock)
             self.removeundo(repo)
 
     def _apply(self, repo, series, list=False, update_status=True,
                strict=False, patchdir=None, merge=None, all_files={}):
         '''returns (error, hash)
         error = 1 for unable to read, 2 for patch failed, 3 for patch fuzz'''
         # TODO unify with commands.py
         if not patchdir:
             patchdir = self.path
         err = 0
         n = None
         for patchname in series:
             pushable, reason = self.pushable(patchname)
             if not pushable:
                 self.explain_pushable(patchname, all_patches=True)
                 continue
             self.ui.warn(_("applying %s\n") % patchname)
             pf = os.path.join(patchdir, patchname)
 
             try:
                 ph = patchheader(self.join(patchname))
             except:
                 self.ui.warn(_("unable to read %s\n") % patchname)
                 err = 1
                 break
 
             message = ph.message
             if not message:
                 message = _("imported patch %s\n") % patchname
             else:
                 if list:
                     message.append(_("\nimported patch %s") % patchname)
                 message = '\n'.join(message)
 
             if ph.haspatch:
                 (patcherr, files, fuzz) = self.patch(repo, pf)
                 all_files.update(files)
                 patcherr = not patcherr
             else:
                 self.ui.warn(_("patch %s is empty\n") % patchname)
                 patcherr, files, fuzz = 0, [], 0
 
             if merge and files:
                 # Mark as removed/merged and update dirstate parent info
                 removed = []
                 merged = []
                 for f in files:
                     if os.path.exists(repo.wjoin(f)):
                         merged.append(f)
                     else:
                         removed.append(f)
                 for f in removed:
                     repo.dirstate.remove(f)
                 for f in merged:
                     repo.dirstate.merge(f)
                 p1, p2 = repo.dirstate.parents()
                 repo.dirstate.setparents(p1, merge)
 
             files = patch.updatedir(self.ui, repo, files)
             match = cmdutil.matchfiles(repo, files or [])
             n = repo.commit(message, ph.user, ph.date, match=match, force=True)
 
             if n is None:
                 raise util.Abort(_("repo commit failed"))
 
             if update_status:
                 self.applied.append(statusentry(hex(n), patchname))
 
             if patcherr:
                 self.ui.warn(_("patch failed, rejects left in working dir\n"))
                 err = 2
                 break
 
             if fuzz and strict:
                 self.ui.warn(_("fuzz found when applying patch, stopping\n"))
                 err = 3
                 break
         return (err, n)
 
     def _cleanup(self, patches, numrevs, keep=False):
         if not keep:
             r = self.qrepo()
             if r:
                 r.remove(patches, True)
             else:
                 for p in patches:
                     os.unlink(self.join(p))
 
         if numrevs:
             del self.applied[:numrevs]
             self.applied_dirty = 1
 
         for i in sorted([self.find_series(p) for p in patches], reverse=True):
             del self.full_series[i]
         self.parse_series()
         self.series_dirty = 1
 
     def _revpatches(self, repo, revs):
         firstrev = repo[self.applied[0].rev].rev()
         patches = []
         for i, rev in enumerate(revs):
 
             if rev < firstrev:
                 raise util.Abort(_('revision %d is not managed') % rev)
 
             ctx = repo[rev]
             base = bin(self.applied[i].rev)
             if ctx.node() != base:
                 msg = _('cannot delete revision %d above applied patches')
                 raise util.Abort(msg % rev)
 
             patch = self.applied[i].name
             for fmt in ('[mq]: %s', 'imported patch %s'):
                 if ctx.description() == fmt % patch:
                     msg = _('patch %s finalized without changeset message\n')
                     repo.ui.status(msg % patch)
                     break
 
             patches.append(patch)
         return patches
 
     def finish(self, repo, revs):
         patches = self._revpatches(repo, sorted(revs))
         self._cleanup(patches, len(patches))
 
     def delete(self, repo, patches, opts):
         if not patches and not opts.get('rev'):
             raise util.Abort(_('qdelete requires at least one revision or '
                                'patch name'))
 
         realpatches = []
         for patch in patches:
             patch = self.lookup(patch, strict=True)
             info = self.isapplied(patch)
             if info:
                 raise util.Abort(_("cannot delete applied patch %s") % patch)
             if patch not in self.series:
                 raise util.Abort(_("patch %s not in series file") % patch)
             realpatches.append(patch)
 
         numrevs = 0
         if opts.get('rev'):
             if not self.applied:
                 raise util.Abort(_('no patches applied'))
             revs = cmdutil.revrange(repo, opts['rev'])
             if len(revs) > 1 and revs[0] > revs[1]:
                 revs.reverse()
             revpatches = self._revpatches(repo, revs)
             realpatches += revpatches
             numrevs = len(revpatches)
 
         self._cleanup(realpatches, numrevs, opts.get('keep'))
 
     def check_toppatch(self, repo):
         if len(self.applied) > 0:
             top = bin(self.applied[-1].rev)
             pp = repo.dirstate.parents()
             if top not in pp:
                 raise util.Abort(_("working directory revision is not qtip"))
             return top
         return None
     def check_localchanges(self, repo, force=False, refresh=True):
         m, a, r, d = repo.status()[:4]
         if m or a or r or d:
             if not force:
                 if refresh:
                     raise util.Abort(_("local changes found, refresh first"))
                 else:
                     raise util.Abort(_("local changes found"))
         return m, a, r, d
 
     _reserved = ('series', 'status', 'guards')
     def check_reserved_name(self, name):
         if (name in self._reserved or name.startswith('.hg')
             or name.startswith('.mq')):
             raise util.Abort(_('"%s" cannot be used as the name of a patch')
                              % name)
 
     def new(self, repo, patchfn, *pats, **opts):
         """options:
            msg: a string or a no-argument function returning a string
         """
         msg = opts.get('msg')
         force = opts.get('force')
         user = opts.get('user')
         date = opts.get('date')
         if date:
             date = util.parsedate(date)
         self.check_reserved_name(patchfn)
         if os.path.exists(self.join(patchfn)):
             raise util.Abort(_('patch "%s" already exists') % patchfn)
         if opts.get('include') or opts.get('exclude') or pats:
             match = cmdutil.match(repo, pats, opts)
             # detect missing files in pats
             def badfn(f, msg):
                 raise util.Abort('%s: %s' % (f, msg))
             match.bad = badfn
             m, a, r, d = repo.status(match=match)[:4]
         else:
             m, a, r, d = self.check_localchanges(repo, force)
             match = cmdutil.matchfiles(repo, m + a + r)
         commitfiles = m + a + r
         self.check_toppatch(repo)
         insert = self.full_series_end()
         wlock = repo.wlock()
         try:
             # if patch file write fails, abort early
             p = self.opener(patchfn, "w")
             try:
                 if date:
                     p.write("# HG changeset patch\n")
                     if user:
                         p.write("# User " + user + "\n")
                     p.write("# Date %d %d\n\n" % date)
                 elif user:
                     p.write("From: " + user + "\n\n")
 
                 if hasattr(msg, '__call__'):
                     msg = msg()
                 commitmsg = msg and msg or ("[mq]: %s" % patchfn)
                 n = repo.commit(commitmsg, user, date, match=match, force=True)
                 if n is None:
                     raise util.Abort(_("repo commit failed"))
                 try:
                     self.full_series[insert:insert] = [patchfn]
                     self.applied.append(statusentry(hex(n), patchfn))
                     self.parse_series()
                     self.series_dirty = 1
                     self.applied_dirty = 1
                     if msg:
                         msg = msg + "\n\n"
                         p.write(msg)
                     if commitfiles:
                         diffopts = self.diffopts()
                         if opts.get('git'): diffopts.git = True
                         parent = self.qparents(repo, n)
                         chunks = patch.diff(repo, node1=parent, node2=n,
                                             match=match, opts=diffopts)
                         for chunk in chunks:
                             p.write(chunk)
                     p.close()
                     wlock.release()
                     wlock = None
                     r = self.qrepo()
                     if r: r.add([patchfn])
                 except:
                     repo.rollback()
                     raise
             except Exception:
                 patchpath = self.join(patchfn)
                 try:
                     os.unlink(patchpath)
                 except:
                     self.ui.warn(_('error unlinking %s\n') % patchpath)
                 raise
             self.removeundo(repo)
         finally:
             release(wlock)
 
     def strip(self, repo, rev, update=True, backup="all", force=None):
         wlock = lock = None
         try:
             wlock = repo.wlock()
             lock = repo.lock()
 
             if update:
                 self.check_localchanges(repo, force=force, refresh=False)
                 urev = self.qparents(repo, rev)
                 hg.clean(repo, urev)
                 repo.dirstate.write()
 
             self.removeundo(repo)
             repair.strip(self.ui, repo, rev, backup)
             # strip may have unbundled a set of backed up revisions after
             # the actual strip
             self.removeundo(repo)
         finally:
             release(lock, wlock)
 
     def isapplied(self, patch):
         """returns (index, rev, patch)"""
         for i, a in enumerate(self.applied):
             if a.name == patch:
                 return (i, a.rev, a.name)
         return None
 
     # if the exact patch name does not exist, we try a few
     # variations.  If strict is passed, we try only #1
     #
     # 1) a number to indicate an offset in the series file
     # 2) a unique substring of the patch name was given
     # 3) patchname[-+]num to indicate an offset in the series file
     def lookup(self, patch, strict=False):
         patch = patch and str(patch)
 
         def partial_name(s):
             if s in self.series:
                 return s
             matches = [x for x in self.series if s in x]
             if len(matches) > 1:
                 self.ui.warn(_('patch name "%s" is ambiguous:\n') % s)
                 for m in matches:
                     self.ui.warn('  %s\n' % m)
                 return None
             if matches:
                 return matches[0]
             if len(self.series) > 0 and len(self.applied) > 0:
                 if s == 'qtip':
                     return self.series[self.series_end(True)-1]
                 if s == 'qbase':
                     return self.series[0]
             return None
 
         if patch is None:
             return None
         if patch in self.series:
             return patch
 
         if not os.path.isfile(self.join(patch)):
             try:
                 sno = int(patch)
             except(ValueError, OverflowError):
                 pass
             else:
                 if -len(self.series) <= sno < len(self.series):
                     return self.series[sno]
 
             if not strict:
                 res = partial_name(patch)
                 if res:
                     return res
                 minus = patch.rfind('-')
                 if minus >= 0:
                     res = partial_name(patch[:minus])
                     if res:
                         i = self.series.index(res)
                         try:
                             off = int(patch[minus+1:] or 1)
                         except(ValueError, OverflowError):
                             pass
                         else:
                             if i - off >= 0:
                                 return self.series[i - off]
                 plus = patch.rfind('+')
                 if plus >= 0:
                     res = partial_name(patch[:plus])
                     if res:
                         i = self.series.index(res)
                         try:
                             off = int(patch[plus+1:] or 1)
                         except(ValueError, OverflowError):
                             pass
                         else:
                             if i + off < len(self.series):
                                 return self.series[i + off]
         raise util.Abort(_("patch %s not in series") % patch)
 
     def push(self, repo, patch=None, force=False, list=False,
              mergeq=None, all=False):
         wlock = repo.wlock()
         try:
             if repo.dirstate.parents()[0] not in repo.heads():
                 self.ui.status(_("(working directory not at a head)\n"))
 
             if not self.series:
                 self.ui.warn(_('no patches in series\n'))
                 return 0
 
             patch = self.lookup(patch)
             # Suppose our series file is: A B C and the current 'top'
             # patch is B. qpush C should be performed (moving forward)
             # qpush B is a NOP (no change) qpush A is an error (can't
             # go backwards with qpush)
             if patch:
                 info = self.isapplied(patch)
                 if info:
                     if info[0] < len(self.applied) - 1:
                         raise util.Abort(
                             _("cannot push to a previous patch: %s") % patch)
                     self.ui.warn(
                         _('qpush: %s is already at the top\n') % patch)
                     return
                 pushable, reason = self.pushable(patch)
                 if not pushable:
                     if reason:
                         reason = _('guarded by %r') % reason
                     else:
                         reason = _('no matching guards')
                     self.ui.warn(_("cannot push '%s' - %s\n") % (patch, reason))
                     return 1
             elif all:
                 patch = self.series[-1]
                 if self.isapplied(patch):
                     self.ui.warn(_('all patches are currently applied\n'))
                     return 0
 
             # Following the above example, starting at 'top' of B:
             # qpush should be performed (pushes C), but a subsequent
             # qpush without an argument is an error (nothing to
             # apply). This allows a loop of "...while hg qpush..." to
             # work as it detects an error when done
             start = self.series_end()
             if start == len(self.series):
                 self.ui.warn(_('patch series already fully applied\n'))
                 return 1
             if not force:
                 self.check_localchanges(repo)
 
             self.applied_dirty = 1
             if start > 0:
                 self.check_toppatch(repo)
             if not patch:
                 patch = self.series[start]
                 end = start + 1
             else:
                 end = self.series.index(patch, start) + 1
 
             s = self.series[start:end]
             all_files = {}
             try:
                 if mergeq:
                     ret = self.mergepatch(repo, mergeq, s)
                 else:
                     ret = self.apply(repo, s, list, all_files=all_files)
             except:
                 self.ui.warn(_('cleaning up working directory...'))
                 node = repo.dirstate.parents()[0]
                 hg.revert(repo, node, None)
                 unknown = repo.status(unknown=True)[4]
                 # only remove unknown files that we know we touched or
                 # created while patching
                 for f in unknown:
                     if f in all_files:
                         util.unlink(repo.wjoin(f))
                 self.ui.warn(_('done\n'))
                 raise
 
             top = self.applied[-1].name
             if ret[0] and ret[0] > 1:
                 msg = _("errors during apply, please fix and refresh %s\n")
                 self.ui.write(msg % top)
             else:
                 self.ui.write(_("now at: %s\n") % top)
             return ret[0]
 
         finally:
             wlock.release()
 
     def pop(self, repo, patch=None, force=False, update=True, all=False):
         def getfile(f, rev, flags):
             t = repo.file(f).read(rev)
             repo.wwrite(f, t, flags)
 
         wlock = repo.wlock()
         try:
             if patch:
                 # index, rev, patch
                 info = self.isapplied(patch)
                 if not info:
                     patch = self.lookup(patch)
                 info = self.isapplied(patch)
                 if not info:
                     raise util.Abort(_("patch %s is not applied") % patch)
 
             if len(self.applied) == 0:
                 # Allow qpop -a to work repeatedly,
                 # but not qpop without an argument
                 self.ui.warn(_("no patches applied\n"))
                 return not all
 
             if all:
                 start = 0
             elif patch:
                 start = info[0] + 1
             else:
                 start = len(self.applied) - 1
 
             if start >= len(self.applied):
                 self.ui.warn(_("qpop: %s is already at the top\n") % patch)
                 return
 
             if not update:
                 parents = repo.dirstate.parents()
                 rr = [ bin(x.rev) for x in self.applied ]
                 for p in parents:
                     if p in rr:
                         self.ui.warn(_("qpop: forcing dirstate update\n"))
                         update = True
             else:
                 parents = [p.hex() for p in repo[None].parents()]
                 needupdate = False
                 for entry in self.applied[start:]:
                     if entry.rev in parents:
                         needupdate = True
                         break
                 update = needupdate
 
             if not force and update:
                 self.check_localchanges(repo)
 
             self.applied_dirty = 1
             end = len(self.applied)
             rev = bin(self.applied[start].rev)
             if update:
                 top = self.check_toppatch(repo)
 
             try:
                 heads = repo.changelog.heads(rev)
             except error.LookupError:
                 node = short(rev)
                 raise util.Abort(_('trying to pop unknown node %s') % node)
 
             if heads != [bin(self.applied[-1].rev)]:
                 raise util.Abort(_("popping would remove a revision not "
                                    "managed by this patch queue"))
 
             # we know there are no local changes, so we can make a simplified
             # form of hg.update.
             if update:
                 qp = self.qparents(repo, rev)
                 changes = repo.changelog.read(qp)
                 mmap = repo.manifest.read(changes[0])
                 m, a, r, d = repo.status(qp, top)[:4]
                 if d:
                     raise util.Abort(_("deletions found between repo revs"))
                 for f in m:
                     getfile(f, mmap[f], mmap.flags(f))
                 for f in r:
                     getfile(f, mmap[f], mmap.flags(f))
                 for f in m + r:
                     repo.dirstate.normal(f)
                 for f in a:
                     try:
                         os.unlink(repo.wjoin(f))
                     except OSError, e:
                         if e.errno != errno.ENOENT:
                             raise
                     try: os.removedirs(os.path.dirname(repo.wjoin(f)))
                     except: pass
                     repo.dirstate.forget(f)
                 repo.dirstate.setparents(qp, nullid)
             del self.applied[start:end]
             self.strip(repo, rev, update=False, backup='strip')
             if len(self.applied):
                 self.ui.write(_("now at: %s\n") % self.applied[-1].name)
             else:
                 self.ui.write(_("patch queue now empty\n"))
         finally:
             wlock.release()
 
     def diff(self, repo, pats, opts):
         top = self.check_toppatch(repo)
         if not top:
             self.ui.write(_("no patches applied\n"))
             return
         qp = self.qparents(repo, top)
         self._diffopts = patch.diffopts(self.ui, opts)
         self.printdiff(repo, qp, files=pats, opts=opts)
 
     def refresh(self, repo, pats=None, **opts):
         if len(self.applied) == 0:
             self.ui.write(_("no patches applied\n"))
             return 1
         msg = opts.get('msg', '').rstrip()
         newuser = opts.get('user')
         newdate = opts.get('date')
         if newdate:
             newdate = '%d %d' % util.parsedate(newdate)
         wlock = repo.wlock()
         try:
             self.check_toppatch(repo)
             (top, patchfn) = (self.applied[-1].rev, self.applied[-1].name)
             top = bin(top)
             if repo.changelog.heads(top) != [top]:
                 raise util.Abort(_("cannot refresh a revision with children"))
             cparents = repo.changelog.parents(top)
             patchparent = self.qparents(repo, top)
             ph = patchheader(self.join(patchfn))
 
             patchf = self.opener(patchfn, 'r')
 
             # if the patch was a git patch, refresh it as a git patch
             for line in patchf:
                 if line.startswith('diff --git'):
                     self.diffopts().git = True
                     break
 
             if msg:
                 ph.setmessage(msg)
             if newuser:
                 ph.setuser(newuser)
             if newdate:
                 ph.setdate(newdate)
 
             # only commit new patch when write is complete
             patchf = self.opener(patchfn, 'w', atomictemp=True)
 
             patchf.seek(0)
             patchf.truncate()
 
             comments = str(ph)
             if comments:
                 patchf.write(comments)
 
             if opts.get('git'):
                 self.diffopts().git = True
             tip = repo.changelog.tip()
             if top == tip:
                 # if the top of our patch queue is also the tip, there is an
                 # optimization here.  We update the dirstate in place and strip
                 # off the tip commit.  Then just commit the current directory
                 # tree.  We can also send repo.commit the list of files
                 # changed to speed up the diff
                 #
                 # in short mode, we only diff the files included in the
                 # patch already plus specified files
                 #
                 # this should really read:
                 #   mm, dd, aa, aa2 = repo.status(tip, patchparent)[:4]
                 # but we do it backwards to take advantage of manifest/chlog
                 # caching against the next repo.status call
                 #
                 mm, aa, dd, aa2 = repo.status(patchparent, tip)[:4]
                 changes = repo.changelog.read(tip)
                 man = repo.manifest.read(changes[0])
                 aaa = aa[:]
                 matchfn = cmdutil.match(repo, pats, opts)
                 if opts.get('short'):
                     # if amending a patch, we start with existing
                     # files plus specified files - unfiltered
                     match = cmdutil.matchfiles(repo, mm + aa + dd + matchfn.files())
                     # filter with inc/exl options
                     matchfn = cmdutil.match(repo, opts=opts)
                 else:
                     match = cmdutil.matchall(repo)
                 m, a, r, d = repo.status(match=match)[:4]
 
                 # we might end up with files that were added between
                 # tip and the dirstate parent, but then changed in the
                 # local dirstate. in this case, we want them to only
                 # show up in the added section
                 for x in m:
                     if x not in aa:
                         mm.append(x)
                 # we might end up with files added by the local dirstate that
                 # were deleted by the patch.  In this case, they should only
                 # show up in the changed section.
                 for x in a:
                     if x in dd:
                         del dd[dd.index(x)]
                         mm.append(x)
                     else:
                         aa.append(x)
                 # make sure any files deleted in the local dirstate
                 # are not in the add or change column of the patch
                 forget = []
                 for x in d + r:
                     if x in aa:
                         del aa[aa.index(x)]
                         forget.append(x)
                         continue
                     elif x in mm:
                         del mm[mm.index(x)]
                     dd.append(x)
 
                 m = list(set(mm))
                 r = list(set(dd))
                 a = list(set(aa))
                 c = [filter(matchfn, l) for l in (m, a, r)]
                 match = cmdutil.matchfiles(repo, set(c[0] + c[1] + c[2]))
                 chunks = patch.diff(repo, patchparent, match=match,
                                     changes=c, opts=self.diffopts())
                 for chunk in chunks:
                     patchf.write(chunk)
 
                 try:
                     if self.diffopts().git:
                         copies = {}
                         for dst in a:
                             src = repo.dirstate.copied(dst)
                             # during qfold, the source file for copies may
                             # be removed. Treat this as a simple add.
                             if src is not None and src in repo.dirstate:
                                 copies.setdefault(src, []).append(dst)
                             repo.dirstate.add(dst)
                         # remember the copies between patchparent and tip
                         for dst in aaa:
                             f = repo.file(dst)
                             src = f.renamed(man[dst])
                             if src:
                                 copies.setdefault(src[0], []).extend(copies.get(dst, []))
                                 if dst in a:
                                     copies[src[0]].append(dst)
                             # we can't copy a file created by the patch itself
                             if dst in copies:
                                 del copies[dst]
                         for src, dsts in copies.iteritems():
                             for dst in dsts:
                                 repo.dirstate.copy(src, dst)
                     else:
                         for dst in a:
                             repo.dirstate.add(dst)
                         # Drop useless copy information
                         for f in list(repo.dirstate.copies()):
                             repo.dirstate.copy(None, f)
                     for f in r:
                         repo.dirstate.remove(f)
                     # if the patch excludes a modified file, mark that
                     # file with mtime=0 so status can see it.
                     mm = []
                     for i in xrange(len(m)-1, -1, -1):
                         if not matchfn(m[i]):
                             mm.append(m[i])
                             del m[i]
                     for f in m:
                         repo.dirstate.normal(f)
                     for f in mm:
                         repo.dirstate.normallookup(f)
                     for f in forget:
                         repo.dirstate.forget(f)
 
                     if not msg:
                         if not ph.message:
                             message = "[mq]: %s\n" % patchfn
                         else:
                             message = "\n".join(ph.message)
                     else:
                         message = msg
 
                     user = ph.user or changes[1]
 
                     # assumes strip can roll itself back if interrupted
                     repo.dirstate.setparents(*cparents)
                     self.applied.pop()
                     self.applied_dirty = 1
                     self.strip(repo, top, update=False,
                                backup='strip')
                 except:
                     repo.dirstate.invalidate()
                     raise
 
                 try:
                     # might be nice to attempt to roll back strip after this
                     patchf.rename()
                     n = repo.commit(message, user, ph.date, match=match,
                                     force=True)
                     self.applied.append(statusentry(hex(n), patchfn))
                 except:
                     ctx = repo[cparents[0]]
                     repo.dirstate.rebuild(ctx.node(), ctx.manifest())
                     self.save_dirty()
                     self.ui.warn(_('refresh interrupted while patch was popped! '
                                    '(revert --all, qpush to recover)\n'))
                     raise
             else:
                 self.printdiff(repo, patchparent, fp=patchf)
                 patchf.rename()
                 added = repo.status()[1]
                 for a in added:
                     f = repo.wjoin(a)
                     try:
                         os.unlink(f)
                     except OSError, e:
                         if e.errno != errno.ENOENT:
                             raise
                     try: os.removedirs(os.path.dirname(f))
                     except: pass
                     # forget the file copies in the dirstate
                     # push should readd the files later on
                     repo.dirstate.forget(a)
                 self.pop(repo, force=True)
                 self.push(repo, force=True)
         finally:
             wlock.release()
             self.removeundo(repo)
 
     def init(self, repo, create=False):
         if not create and os.path.isdir(self.path):
             raise util.Abort(_("patch queue directory already exists"))
         try:
             os.mkdir(self.path)
         except OSError, inst:
             if inst.errno != errno.EEXIST or not create:
                 raise
         if create:
             return self.qrepo(create=True)
 
     def unapplied(self, repo, patch=None):
         if patch and patch not in self.series:
             raise util.Abort(_("patch %s is not in series file") % patch)
         if not patch:
             start = self.series_end()
         else:
             start = self.series.index(patch) + 1
         unapplied = []
         for i in xrange(start, len(self.series)):
             pushable, reason = self.pushable(i)
             if pushable:
                 unapplied.append((i, self.series[i]))
             self.explain_pushable(i)
         return unapplied
 
     def qseries(self, repo, missing=None, start=0, length=None, status=None,
                 summary=False):
         def displayname(patchname):
             if summary:
                 ph = patchheader(self.join(patchname))
                 msg = ph.message
                 msg = msg and ': ' + msg[0] or ': '
             else:
                 msg = ''
             return '%s%s' % (patchname, msg)
 
         applied = set([p.name for p in self.applied])
         if length is None:
             length = len(self.series) - start
         if not missing:
             for i in xrange(start, start+length):
                 patch = self.series[i]
                 if patch in applied:
                     stat = 'A'
                 elif self.pushable(i)[0]:
                     stat = 'U'
                 else:
                     stat = 'G'
                 pfx = ''
                 if self.ui.verbose:
                     pfx = '%d %s ' % (i, stat)
                 elif status and status != stat:
                     continue
                 self.ui.write('%s%s\n' % (pfx, displayname(patch)))
         else:
             msng_list = []
             for root, dirs, files in os.walk(self.path):
                 d = root[len(self.path) + 1:]
                 for f in files:
                     fl = os.path.join(d, f)
                     if (fl not in self.series and
                         fl not in (self.status_path, self.series_path,
                                    self.guards_path)
                         and not fl.startswith('.')):
                         msng_list.append(fl)
             for x in sorted(msng_list):
                 pfx = self.ui.verbose and ('D ') or ''
                 self.ui.write("%s%s\n" % (pfx, displayname(x)))
 
     def issaveline(self, l):
         if l.name == '.hg.patches.save.line':
             return True
 
     def qrepo(self, create=False):
         if create or os.path.isdir(self.join(".hg")):
             return hg.repository(self.ui, path=self.path, create=create)
 
     def restore(self, repo, rev, delete=None, qupdate=None):
         c = repo.changelog.read(rev)
         desc = c[4].strip()
         lines = desc.splitlines()
         i = 0
         datastart = None
         series = []
         applied = []
         qpp = None
         for i, line in enumerate(lines):
             if line == 'Patch Data:':
                 datastart = i + 1
             elif line.startswith('Dirstate:'):
                 l = line.rstrip()
                 l = l[10:].split(' ')
                 qpp = [ bin(x) for x in l ]
             elif datastart != None:
                 l = line.rstrip()
                 se = statusentry(l)
                 file_ = se.name
                 if se.rev:
                     applied.append(se)
                 else:
                     series.append(file_)
         if datastart is None:
             self.ui.warn(_("No saved patch data found\n"))
             return 1
         self.ui.warn(_("restoring status: %s\n") % lines[0])
         self.full_series = series
         self.applied = applied
         self.parse_series()
         self.series_dirty = 1
         self.applied_dirty = 1
         heads = repo.changelog.heads()
         if delete:
             if rev not in heads:
                 self.ui.warn(_("save entry has children, leaving it alone\n"))
             else:
                 self.ui.warn(_("removing save entry %s\n") % short(rev))
                 pp = repo.dirstate.parents()
                 if rev in pp:
                     update = True
                 else:
                     update = False
                 self.strip(repo, rev, update=update, backup='strip')
         if qpp:
             self.ui.warn(_("saved queue repository parents: %s %s\n") %
                          (short(qpp[0]), short(qpp[1])))
             if qupdate:
                 self.ui.status(_("queue directory updating\n"))
                 r = self.qrepo()
                 if not r:
                     self.ui.warn(_("Unable to load queue repository\n"))
                     return 1
                 hg.clean(r, qpp[0])
 
     def save(self, repo, msg=None):
         if len(self.applied) == 0:
             self.ui.warn(_("save: no patches applied, exiting\n"))
             return 1
         if self.issaveline(self.applied[-1]):
             self.ui.warn(_("status is already saved\n"))
             return 1
 
         ar = [ ':' + x for x in self.full_series ]
         if not msg:
             msg = _("hg patches saved state")
         else:
             msg = "hg patches: " + msg.rstrip('\r\n')
         r = self.qrepo()
         if r:
             pp = r.dirstate.parents()
             msg += "\nDirstate: %s %s" % (hex(pp[0]), hex(pp[1]))
         msg += "\n\nPatch Data:\n"
         text = msg + "\n".join([str(x) for x in self.applied]) + '\n' + (ar and
                    "\n".join(ar) + '\n' or "")
         n = repo.commit(text, force=True)
         if not n:
             self.ui.warn(_("repo commit failed\n"))
             return 1
         self.applied.append(statusentry(hex(n),'.hg.patches.save.line'))
         self.applied_dirty = 1
         self.removeundo(repo)
 
     def full_series_end(self):
         if len(self.applied) > 0:
             p = self.applied[-1].name
             end = self.find_series(p)
             if end is None:
                 return len(self.full_series)
             return end + 1
         return 0
 
     def series_end(self, all_patches=False):
         """If all_patches is False, return the index of the next pushable patch
         in the series, or the series length. If all_patches is True, return the
         index of the first patch past the last applied one.
         """
         end = 0
         def next(start):
             if all_patches:
                 return start
             i = start
             while i < len(self.series):
                 p, reason = self.pushable(i)
                 if p:
                     break
                 self.explain_pushable(i)
                 i += 1
             return i
         if len(self.applied) > 0:
             p = self.applied[-1].name
             try:
                 end = self.series.index(p)
             except ValueError:
                 return 0
             return next(end + 1)
         return next(end)
 
     def appliedname(self, index):
         pname = self.applied[index].name
         if not self.ui.verbose:
             p = pname
         else:
             p = str(self.series.index(pname)) + " " + pname
         return p
 
     def qimport(self, repo, files, patchname=None, rev=None, existing=None,
                 force=None, git=False):
         def checkseries(patchname):
             if patchname in self.series:
                 raise util.Abort(_('patch %s is already in the series file')
                                  % patchname)
         def checkfile(patchname):
             if not force and os.path.exists(self.join(patchname)):
                 raise util.Abort(_('patch "%s" already exists')
                                  % patchname)
 
         if rev:
             if files:
                 raise util.Abort(_('option "-r" not valid when importing '
                                    'files'))
             rev = cmdutil.revrange(repo, rev)
             rev.sort(lambda x, y: cmp(y, x))
         if (len(files) > 1 or len(rev) > 1) and patchname:
             raise util.Abort(_('option "-n" not valid when importing multiple '
                                'patches'))
         i = 0
         added = []
         if rev:
             # If mq patches are applied, we can only import revisions
             # that form a linear path to qbase.
             # Otherwise, they should form a linear path to a head.
             heads = repo.changelog.heads(repo.changelog.node(rev[-1]))
             if len(heads) > 1:
                 raise util.Abort(_('revision %d is the root of more than one '
                                    'branch') % rev[-1])
             if self.applied:
                 base = hex(repo.changelog.node(rev[0]))
                 if base in [n.rev for n in self.applied]:
                     raise util.Abort(_('revision %d is already managed')
                                      % rev[0])
                 if heads != [bin(self.applied[-1].rev)]:
                     raise util.Abort(_('revision %d is not the parent of '
                                        'the queue') % rev[0])
                 base = repo.changelog.rev(bin(self.applied[0].rev))
                 lastparent = repo.changelog.parentrevs(base)[0]
             else:
                 if heads != [repo.changelog.node(rev[0])]:
                     raise util.Abort(_('revision %d has unmanaged children')
                                      % rev[0])
                 lastparent = None
 
             if git:
                 self.diffopts().git = True
 
             for r in rev:
                 p1, p2 = repo.changelog.parentrevs(r)
                 n = repo.changelog.node(r)
                 if p2 != nullrev:
                     raise util.Abort(_('cannot import merge revision %d') % r)
                 if lastparent and lastparent != r:
                     raise util.Abort(_('revision %d is not the parent of %d')
                                      % (r, lastparent))
                 lastparent = p1
 
                 if not patchname:
                     patchname = normname('%d.diff' % r)
                 self.check_reserved_name(patchname)
                 checkseries(patchname)
                 checkfile(patchname)
                 self.full_series.insert(0, patchname)
 
                 patchf = self.opener(patchname, "w")
                 patch.export(repo, [n], fp=patchf, opts=self.diffopts())
                 patchf.close()
 
                 se = statusentry(hex(n), patchname)
                 self.applied.insert(0, se)
 
                 added.append(patchname)
                 patchname = None
             self.parse_series()
             self.applied_dirty = 1
 
         for filename in files:
             if existing:
                 if filename == '-':
                     raise util.Abort(_('-e is incompatible with import from -'))
                 if not patchname:
                     patchname = normname(filename)
                 self.check_reserved_name(patchname)
                 if not os.path.isfile(self.join(patchname)):
                     raise util.Abort(_("patch %s does not exist") % patchname)
             else:
                 try:
                     if filename == '-':
                         if not patchname:
                             raise util.Abort(_('need --name to import a patch from -'))
                         text = sys.stdin.read()
                     else:
                         text = url.open(self.ui, filename).read()
                 except (OSError, IOError):
                     raise util.Abort(_("unable to read %s") % filename)
                 if not patchname:
                     patchname = normname(os.path.basename(filename))
                 self.check_reserved_name(patchname)
                 checkfile(patchname)
                 patchf = self.opener(patchname, "w")
                 patchf.write(text)
             if not force:
                 checkseries(patchname)
             if patchname not in self.series:
                 index = self.full_series_end() + i
                 self.full_series[index:index] = [patchname]
             self.parse_series()
             self.ui.warn(_("adding %s to series file\n") % patchname)
             i += 1
             added.append(patchname)
             patchname = None
         self.series_dirty = 1
         qrepo = self.qrepo()
         if qrepo:
             qrepo.add(added)
 
 def delete(ui, repo, *patches, **opts):
     """remove patches from queue
 
     The patches must not be applied, unless they are arguments to the
     -r/--rev parameter. At least one patch or revision is required.
 
     With --rev, mq will stop managing the named revisions (converting
     them to regular Mercurial changesets). The qfinish command should
     be used as an alternative for qdelete -r, as the latter option is
     deprecated.
 
     With -k/--keep, the patch files are preserved in the patch
     directory."""
     q = repo.mq
     q.delete(repo, patches, opts)
     q.save_dirty()
     return 0
 
 def applied(ui, repo, patch=None, **opts):
     """print the patches already applied"""
     q = repo.mq
     if patch:
         if patch not in q.series:
             raise util.Abort(_("patch %s is not in series file") % patch)
         end = q.series.index(patch) + 1
     else:
         end = q.series_end(True)
     return q.qseries(repo, length=end, status='A', summary=opts.get('summary'))
 
 def unapplied(ui, repo, patch=None, **opts):
     """print the patches not yet applied"""
     q = repo.mq
     if patch:
         if patch not in q.series:
             raise util.Abort(_("patch %s is not in series file") % patch)
         start = q.series.index(patch) + 1
     else:
         start = q.series_end(True)
     q.qseries(repo, start=start, status='U', summary=opts.get('summary'))
 
 def qimport(ui, repo, *filename, **opts):
     """import a patch
 
     The patch is inserted into the series after the last applied
     patch. If no patches have been applied, qimport prepends the patch
     to the series.
 
     The patch will have the same name as its source file unless you
     give it a new one with -n/--name.
 
     You can register an existing patch inside the patch directory with
     the -e/--existing flag.
 
     With -f/--force, an existing patch of the same name will be
     overwritten.
 
     An existing changeset may be placed under mq control with -r/--rev
     (e.g. qimport --rev tip -n patch will place tip under mq control).
     With -g/--git, patches imported with --rev will use the git diff
     format. See the diffs help topic for information on why this is
     important for preserving rename/copy information and permission
     changes.
 
     To import a patch from standard input, pass - as the patch file.
     When importing from standard input, a patch name must be specified
     using the --name flag.
     """
     q = repo.mq
     q.qimport(repo, filename, patchname=opts['name'],
               existing=opts['existing'], force=opts['force'], rev=opts['rev'],
               git=opts['git'])
     q.save_dirty()
 
     if opts.get('push') and not opts.get('rev'):
         return q.push(repo, None)
     return 0
 
 def init(ui, repo, **opts):
     """init a new queue repository
 
     The queue repository is unversioned by default. If
     -c/--create-repo is specified, qinit will create a separate nested
     repository for patches (qinit -c may also be run later to convert
     an unversioned patch repository into a versioned one). You can use
     qcommit to commit changes to this queue repository."""
     q = repo.mq
     r = q.init(repo, create=opts['create_repo'])
     q.save_dirty()
     if r:
         if not os.path.exists(r.wjoin('.hgignore')):
             fp = r.wopener('.hgignore', 'w')
             fp.write('^\\.hg\n')
             fp.write('^\\.mq\n')
             fp.write('syntax: glob\n')
             fp.write('status\n')
             fp.write('guards\n')
             fp.close()
         if not os.path.exists(r.wjoin('series')):
             r.wopener('series', 'w').close()
         r.add(['.hgignore', 'series'])
         commands.add(ui, r)
     return 0
 
 def clone(ui, source, dest=None, **opts):
     '''clone main and patch repository at same time
 
     If source is local, destination will have no patches applied. If
     source is remote, this command can not check if patches are
     applied in source, so cannot guarantee that patches are not
     applied in destination. If you clone remote repository, be sure
     before that it has no patches applied.
 
     Source patch repository is looked for in <src>/.hg/patches by
     default. Use -p <url> to change.
 
     The patch directory must be a nested Mercurial repository, as
     would be created by qinit -c.
     '''
     def patchdir(repo):
         url = repo.url()
         if url.endswith('/'):
             url = url[:-1]
         return url + '/.hg/patches'
     if dest is None:
         dest = hg.defaultdest(source)
     sr = hg.repository(cmdutil.remoteui(ui, opts), ui.expandpath(source))
     if opts['patches']:
         patchespath = ui.expandpath(opts['patches'])
     else:
         patchespath = patchdir(sr)
     try:
         hg.repository(ui, patchespath)
     except error.RepoError:
         raise util.Abort(_('versioned patch repository not found'
                            ' (see qinit -c)'))
     qbase, destrev = None, None
     if sr.local():
         if sr.mq.applied:
             qbase = bin(sr.mq.applied[0].rev)
             if not hg.islocal(dest):
                 heads = set(sr.heads())
                 destrev = list(heads.difference(sr.heads(qbase)))
                 destrev.append(sr.changelog.parents(qbase)[0])
     elif sr.capable('lookup'):
         try:
             qbase = sr.lookup('qbase')
         except error.RepoError:
             pass
     ui.note(_('cloning main repository\n'))
     sr, dr = hg.clone(ui, sr.url(), dest,
                       pull=opts['pull'],
                       rev=destrev,
                       update=False,
                       stream=opts['uncompressed'])
     ui.note(_('cloning patch repository\n'))
     hg.clone(ui, opts['patches'] or patchdir(sr), patchdir(dr),
              pull=opts['pull'], update=not opts['noupdate'],
              stream=opts['uncompressed'])
     if dr.local():
         if qbase:
             ui.note(_('stripping applied patches from destination '
                       'repository\n'))
             dr.mq.strip(dr, qbase, update=False, backup=None)
         if not opts['noupdate']:
             ui.note(_('updating destination repository\n'))
             hg.update(dr, dr.changelog.tip())
 
 def commit(ui, repo, *pats, **opts):
     """commit changes in the queue repository"""
     q = repo.mq
     r = q.qrepo()
     if not r: raise util.Abort('no queue repository')
     commands.commit(r.ui, r, *pats, **opts)
 
 def series(ui, repo, **opts):
     """print the entire series file"""
     repo.mq.qseries(repo, missing=opts['missing'], summary=opts['summary'])
     return 0
 
 def top(ui, repo, **opts):
     """print the name of the current patch"""
     q = repo.mq
     t = q.applied and q.series_end(True) or 0
     if t:
         return q.qseries(repo, start=t-1, length=1, status='A',
                          summary=opts.get('summary'))
     else:
         ui.write(_("no patches applied\n"))
         return 1
 
 def next(ui, repo, **opts):
     """print the name of the next patch"""
     q = repo.mq
     end = q.series_end()
     if end == len(q.series):
         ui.write(_("all patches applied\n"))
         return 1
     return q.qseries(repo, start=end, length=1, summary=opts.get('summary'))
 
 def prev(ui, repo, **opts):
     """print the name of the previous patch"""
     q = repo.mq
     l = len(q.applied)
     if l == 1:
         ui.write(_("only one patch applied\n"))
         return 1
     if not l:
         ui.write(_("no patches applied\n"))
         return 1
     return q.qseries(repo, start=l-2, length=1, status='A',
                      summary=opts.get('summary'))
 
 def setupheaderopts(ui, opts):
     def do(opt,val):
         if not opts[opt] and opts['current' + opt]:
             opts[opt] = val
     do('user', ui.username())
     do('date', "%d %d" % util.makedate())
 
 def new(ui, repo, patch, *args, **opts):
     """create a new patch
 
     qnew creates a new patch on top of the currently-applied patch (if
     any). It will refuse to run if there are any outstanding changes
     unless -f/--force is specified, in which case the patch will be
     initialized with them. You may also use -I/--include,
     -X/--exclude, and/or a list of files after the patch name to add
     only changes to matching files to the new patch, leaving the rest
     as uncommitted modifications.
 
     -u/--user and -d/--date can be used to set the (given) user and
     date, respectively. -U/--currentuser and -D/--currentdate set user
     to current user and date to current date.
 
     -e/--edit, -m/--message or -l/--logfile set the patch header as
     well as the commit message. If none is specified, the header is
     empty and the commit message is '[mq]: PATCH'.
 
     Use the -g/--git option to keep the patch in the git extended diff
     format. Read the diffs help topic for more information on why this
     is important for preserving permission changes and copy/rename
     information.
     """
     msg = cmdutil.logmessage(opts)
     def getmsg(): return ui.edit(msg, ui.username())
     q = repo.mq
     opts['msg'] = msg
     if opts.get('edit'):
         opts['msg'] = getmsg
     else:
         opts['msg'] = msg
     setupheaderopts(ui, opts)
     q.new(repo, patch, *args, **opts)
     q.save_dirty()
     return 0
 
 def refresh(ui, repo, *pats, **opts):
     """update the current patch
 
     If any file patterns are provided, the refreshed patch will
     contain only the modifications that match those patterns; the
     remaining modifications will remain in the working directory.
 
     If -s/--short is specified, files currently included in the patch
     will be refreshed just like matched files and remain in the patch.
 
     hg add/remove/copy/rename work as usual, though you might want to
     use git-style patches (-g/--git or [diff] git=1) to track copies
     and renames. See the diffs help topic for more information on the
     git diff format.
     """
     q = repo.mq
     message = cmdutil.logmessage(opts)
     if opts['edit']:
         if not q.applied:
             ui.write(_("no patches applied\n"))
             return 1
         if message:
             raise util.Abort(_('option "-e" incompatible with "-m" or "-l"'))
         patch = q.applied[-1].name
         ph = patchheader(q.join(patch))
         message = ui.edit('\n'.join(ph.message), ph.user or ui.username())
     setupheaderopts(ui, opts)
     ret = q.refresh(repo, pats, msg=message, **opts)
     q.save_dirty()
     return ret
 
 def diff(ui, repo, *pats, **opts):
     """diff of the current patch and subsequent modifications
 
     Shows a diff which includes the current patch as well as any
     changes which have been made in the working directory since the
     last refresh (thus showing what the current patch would become
     after a qrefresh).
 
     Use 'hg diff' if you only want to see the changes made since the
     last qrefresh, or 'hg export qtip' if you want to see changes made
     by the current patch without including changes made since the
     qrefresh.
     """
     repo.mq.diff(repo, pats, opts)
     return 0
 
 def fold(ui, repo, *files, **opts):
     """fold the named patches into the current patch
 
     Patches must not yet be applied. Each patch will be successively
     applied to the current patch in the order given. If all the
     patches apply successfully, the current patch will be refreshed
     with the new cumulative patch, and the folded patches will be
     deleted. With -k/--keep, the folded patch files will not be
     removed afterwards.
 
     The header for each folded patch will be concatenated with the
     current patch header, separated by a line of '* * *'."""
 
     q = repo.mq
 
     if not files:
         raise util.Abort(_('qfold requires at least one patch name'))
     if not q.check_toppatch(repo):
         raise util.Abort(_('No patches applied'))
     q.check_localchanges(repo)
 
     message = cmdutil.logmessage(opts)
     if opts['edit']:
         if message:
             raise util.Abort(_('option "-e" incompatible with "-m" or "-l"'))
 
     parent = q.lookup('qtip')
     patches = []
     messages = []
     for f in files:
         p = q.lookup(f)
         if p in patches or p == parent:
             ui.warn(_('Skipping already folded patch %s') % p)
         if q.isapplied(p):
             raise util.Abort(_('qfold cannot fold already applied patch %s') % p)
         patches.append(p)
 
     for p in patches:
         if not message:
             ph = patchheader(q.join(p))
             if ph.message:
                 messages.append(ph.message)
         pf = q.join(p)
         (patchsuccess, files, fuzz) = q.patch(repo, pf)
         if not patchsuccess:
             raise util.Abort(_('Error folding patch %s') % p)
         patch.updatedir(ui, repo, files)
 
     if not message:
         ph = patchheader(q.join(parent))
         message, user = ph.message, ph.user
         for msg in messages:
             message.append('* * *')
             message.extend(msg)
         message = '\n'.join(message)
 
     if opts['edit']:
         message = ui.edit(message, user or ui.username())
 
     q.refresh(repo, msg=message)
     q.delete(repo, patches, opts)
     q.save_dirty()
 
 def goto(ui, repo, patch, **opts):
     '''push or pop patches until named patch is at top of stack'''
     q = repo.mq
     patch = q.lookup(patch)
     if q.isapplied(patch):
         ret = q.pop(repo, patch, force=opts['force'])
     else:
         ret = q.push(repo, patch, force=opts['force'])
     q.save_dirty()
     return ret
 
 def guard(ui, repo, *args, **opts):
     '''set or print guards for a patch
 
     Guards control whether a patch can be pushed. A patch with no
     guards is always pushed. A patch with a positive guard ("+foo") is
     pushed only if the qselect command has activated it. A patch with
     a negative guard ("-foo") is never pushed if the qselect command
     has activated it.
 
     With no arguments, print the currently active guards.
     With arguments, set guards for the named patch.
     NOTE: Specifying negative guards now requires '--'.
 
     To set guards on another patch:
       hg qguard -- other.patch +2.6.17 -stable
     '''
     def status(idx):
         guards = q.series_guards[idx] or ['unguarded']
         ui.write('%s: %s\n' % (q.series[idx], ' '.join(guards)))
     q = repo.mq
     patch = None
     args = list(args)
     if opts['list']:
         if args or opts['none']:
             raise util.Abort(_('cannot mix -l/--list with options or arguments'))
         for i in xrange(len(q.series)):
             status(i)
         return
     if not args or args[0][0:1] in '-+':
         if not q.applied:
             raise util.Abort(_('no patches applied'))
         patch = q.applied[-1].name
     if patch is None and args[0][0:1] not in '-+':
         patch = args.pop(0)
     if patch is None:
         raise util.Abort(_('no patch to work with'))
     if args or opts['none']:
         idx = q.find_series(patch)
         if idx is None:
             raise util.Abort(_('no patch named %s') % patch)
         q.set_guards(idx, args)
         q.save_dirty()
     else:
         status(q.series.index(q.lookup(patch)))
 
 def header(ui, repo, patch=None):
     """print the header of the topmost or specified patch"""
     q = repo.mq
 
     if patch:
         patch = q.lookup(patch)
     else:
         if not q.applied:
             ui.write('no patches applied\n')
             return 1
         patch = q.lookup('qtip')
     ph = patchheader(repo.mq.join(patch))
 
     ui.write('\n'.join(ph.message) + '\n')
 
 def lastsavename(path):
     (directory, base) = os.path.split(path)
     names = os.listdir(directory)
     namere = re.compile("%s.([0-9]+)" % base)
     maxindex = None
     maxname = None
     for f in names:
         m = namere.match(f)
         if m:
             index = int(m.group(1))
             if maxindex is None or index > maxindex:
                 maxindex = index
                 maxname = f
     if maxname:
         return (os.path.join(directory, maxname), maxindex)
     return (None, None)
 
 def savename(path):
     (last, index) = lastsavename(path)
     if last is None:
         index = 0
     newpath = path + ".%d" % (index + 1)
     return newpath
 
 def push(ui, repo, patch=None, **opts):
     """push the next patch onto the stack
 
     When -f/--force is applied, all local changes in patched files
     will be lost.
     """
     q = repo.mq
     mergeq = None
 
     if opts['merge']:
         if opts['name']:
             newpath = repo.join(opts['name'])
         else:
             newpath, i = lastsavename(q.path)
         if not newpath:
             ui.warn(_("no saved queues found, please use -n\n"))
             return 1
         mergeq = queue(ui, repo.join(""), newpath)
         ui.warn(_("merging with queue at: %s\n") % mergeq.path)
     ret = q.push(repo, patch, force=opts['force'], list=opts['list'],
                  mergeq=mergeq, all=opts.get('all'))
     return ret
 
 def pop(ui, repo, patch=None, **opts):
     """pop the current patch off the stack
 
     By default, pops off the top of the patch stack. If given a patch
     name, keeps popping off patches until the named patch is at the
     top of the stack.
     """
     localupdate = True
     if opts['name']:
         q = queue(ui, repo.join(""), repo.join(opts['name']))
         ui.warn(_('using patch queue: %s\n') % q.path)
         localupdate = False
     else:
         q = repo.mq
     ret = q.pop(repo, patch, force=opts['force'], update=localupdate,
                 all=opts['all'])
     q.save_dirty()
     return ret
 
 def rename(ui, repo, patch, name=None, **opts):
     """rename a patch
 
     With one argument, renames the current patch to PATCH1.
     With two arguments, renames PATCH1 to PATCH2."""
 
     q = repo.mq
 
     if not name:
         name = patch
         patch = None
 
     if patch:
         patch = q.lookup(patch)
     else:
         if not q.applied:
             ui.write(_('no patches applied\n'))
             return
         patch = q.lookup('qtip')
     absdest = q.join(name)
     if os.path.isdir(absdest):
         name = normname(os.path.join(name, os.path.basename(patch)))
         absdest = q.join(name)
     if os.path.exists(absdest):
         raise util.Abort(_('%s already exists') % absdest)
 
     if name in q.series:
         raise util.Abort(_('A patch named %s already exists in the series file') % name)
 
     if ui.verbose:
         ui.write('renaming %s to %s\n' % (patch, name))
     i = q.find_series(patch)
     guards = q.guard_re.findall(q.full_series[i])
     q.full_series[i] = name + ''.join([' #' + g for g in guards])
     q.parse_series()
     q.series_dirty = 1
 
     info = q.isapplied(patch)
     if info:
         q.applied[info[0]] = statusentry(info[1], name)
     q.applied_dirty = 1
 
     util.rename(q.join(patch), absdest)
     r = q.qrepo()
     if r:
         wlock = r.wlock()
         try:
             if r.dirstate[patch] == 'a':
                 r.dirstate.forget(patch)
                 r.dirstate.add(name)
             else:
                 if r.dirstate[name] == 'r':
                     r.undelete([name])
                 r.copy(patch, name)
                 r.remove([patch], False)
         finally:
             wlock.release()
 
     q.save_dirty()
 
 def restore(ui, repo, rev, **opts):
     """restore the queue state saved by a revision"""
     rev = repo.lookup(rev)
     q = repo.mq
     q.restore(repo, rev, delete=opts['delete'],
               qupdate=opts['update'])
     q.save_dirty()
     return 0
 
 def save(ui, repo, **opts):
     """save current queue state"""
     q = repo.mq
     message = cmdutil.logmessage(opts)
     ret = q.save(repo, msg=message)
     if ret:
         return ret
     q.save_dirty()
     if opts['copy']:
         path = q.path
         if opts['name']:
             newpath = os.path.join(q.basepath, opts['name'])
             if os.path.exists(newpath):
                 if not os.path.isdir(newpath):
                     raise util.Abort(_('destination %s exists and is not '
                                        'a directory') % newpath)
                 if not opts['force']:
                     raise util.Abort(_('destination %s exists, '
                                        'use -f to force') % newpath)
         else:
             newpath = savename(path)
         ui.warn(_("copy %s to %s\n") % (path, newpath))
         util.copyfiles(path, newpath)
     if opts['empty']:
         try:
             os.unlink(q.join(q.status_path))
         except:
             pass
     return 0
 
 def strip(ui, repo, rev, **opts):
     """strip a revision and all its descendants from the repository
 
     If one of the working directory's parent revisions is stripped, the
     working directory will be updated to the parent of the stripped
     revision.
     """
     backup = 'all'
     if opts['backup']:
         backup = 'strip'
     elif opts['nobackup']:
         backup = 'none'
 
     rev = repo.lookup(rev)
     p = repo.dirstate.parents()
     cl = repo.changelog
     update = True
     if p[0] == nullid:
         update = False
     elif p[1] == nullid and rev != cl.ancestor(p[0], rev):
         update = False
     elif rev not in (cl.ancestor(p[0], rev), cl.ancestor(p[1], rev)):
         update = False
 
     repo.mq.strip(repo, rev, backup=backup, update=update, force=opts['force'])
     return 0
 
 def select(ui, repo, *args, **opts):
     '''set or print guarded patches to push
 
     Use the qguard command to set or print guards on patch, then use
     qselect to tell mq which guards to use. A patch will be pushed if
     it has no guards or any positive guards match the currently
     selected guard, but will not be pushed if any negative guards
     match the current guard. For example:
 
         qguard foo.patch -stable    (negative guard)
         qguard bar.patch +stable    (positive guard)
         qselect stable
 
     This activates the "stable" guard. mq will skip foo.patch (because
     it has a negative match) but push bar.patch (because it has a
     positive match).
 
     With no arguments, prints the currently active guards.
     With one argument, sets the active guard.
 
     Use -n/--none to deactivate guards (no other arguments needed).
     When no guards are active, patches with positive guards are
     skipped and patches with negative guards are pushed.
 
     qselect can change the guards on applied patches. It does not pop
     guarded patches by default. Use --pop to pop back to the last
     applied patch that is not guarded. Use --reapply (which implies
     --pop) to push back to the current patch afterwards, but skip
     guarded patches.
 
     Use -s/--series to print a list of all guards in the series file
     (no other arguments needed). Use -v for more information.'''
 
     q = repo.mq
     guards = q.active()
     if args or opts['none']:
         old_unapplied = q.unapplied(repo)
         old_guarded = [i for i in xrange(len(q.applied)) if
                        not q.pushable(i)[0]]
         q.set_active(args)
         q.save_dirty()
         if not args:
             ui.status(_('guards deactivated\n'))
         if not opts['pop'] and not opts['reapply']:
             unapplied = q.unapplied(repo)
             guarded = [i for i in xrange(len(q.applied))
                        if not q.pushable(i)[0]]
             if len(unapplied) != len(old_unapplied):
                 ui.status(_('number of unguarded, unapplied patches has '
                             'changed from %d to %d\n') %
                           (len(old_unapplied), len(unapplied)))
             if len(guarded) != len(old_guarded):
                 ui.status(_('number of guarded, applied patches has changed '
                             'from %d to %d\n') %
                           (len(old_guarded), len(guarded)))
     elif opts['series']:
         guards = {}
         noguards = 0
         for gs in q.series_guards:
             if not gs:
                 noguards += 1
             for g in gs:
                 guards.setdefault(g, 0)
                 guards[g] += 1
         if ui.verbose:
             guards['NONE'] = noguards
         guards = guards.items()
         guards.sort(lambda a, b: cmp(a[0][1:], b[0][1:]))
         if guards:
             ui.note(_('guards in series file:\n'))
             for guard, count in guards:
                 ui.note('%2d  ' % count)
                 ui.write(guard, '\n')
         else:
             ui.note(_('no guards in series file\n'))
     else:
         if guards:
             ui.note(_('active guards:\n'))
             for g in guards:
                 ui.write(g, '\n')
         else:
             ui.write(_('no active guards\n'))
     reapply = opts['reapply'] and q.applied and q.appliedname(-1)
     popped = False
     if opts['pop'] or opts['reapply']:
         for i in xrange(len(q.applied)):
             pushable, reason = q.pushable(i)
             if not pushable:
                 ui.status(_('popping guarded patches\n'))
                 popped = True
                 if i == 0:
                     q.pop(repo, all=True)
                 else:
                     q.pop(repo, i-1)
                 break
     if popped:
         try:
             if reapply:
                 ui.status(_('reapplying unguarded patches\n'))
                 q.push(repo, reapply)
         finally:
             q.save_dirty()
 
 def finish(ui, repo, *revrange, **opts):
     """move applied patches into repository history
 
     Finishes the specified revisions (corresponding to applied
     patches) by moving them out of mq control into regular repository
     history.
 
     Accepts a revision range or the -a/--applied option. If --applied
     is specified, all applied mq revisions are removed from mq
     control. Otherwise, the given revisions must be at the base of the
     stack of applied patches.
 
     This can be especially useful if your changes have been applied to
     an upstream repository, or if you are about to push your changes
     to upstream.
     """
     if not opts['applied'] and not revrange:
         raise util.Abort(_('no revisions specified'))
     elif opts['applied']:
         revrange = ('qbase:qtip',) + revrange
 
     q = repo.mq
     if not q.applied:
         ui.status(_('no patches applied\n'))
         return 0
 
     revs = cmdutil.revrange(repo, revrange)
     q.finish(repo, revs)
     q.save_dirty()
     return 0
 
 def reposetup(ui, repo):
     class mqrepo(repo.__class__):
         @util.propertycache
         def mq(self):
             return queue(self.ui, self.join(""))
 
         def abort_if_wdir_patched(self, errmsg, force=False):
             if self.mq.applied and not force:
                 parent = hex(self.dirstate.parents()[0])
                 if parent in [s.rev for s in self.mq.applied]:
                     raise util.Abort(errmsg)
 
         def commit(self, text="", user=None, date=None, match=None,
                    force=False, editor=False, extra={}):
             self.abort_if_wdir_patched(
                 _('cannot commit over an applied mq patch'),
                 force)
 
             return super(mqrepo, self).commit(text, user, date, match, force,
                                               editor, extra)
 
         def push(self, remote, force=False, revs=None):
             if self.mq.applied and not force and not revs:
                 raise util.Abort(_('source has mq patches applied'))
             return super(mqrepo, self).push(remote, force, revs)
 
         def tags(self):
             if self.tagscache:
                 return self.tagscache
 
             tagscache = super(mqrepo, self).tags()
 
             q = self.mq
             if not q.applied:
                 return tagscache
 
             mqtags = [(bin(patch.rev), patch.name) for patch in q.applied]
 
             if mqtags[-1][0] not in self.changelog.nodemap:
                 self.ui.warn(_('mq status file refers to unknown node %s\n')
                              % short(mqtags[-1][0]))
                 return tagscache
 
             mqtags.append((mqtags[-1][0], 'qtip'))
             mqtags.append((mqtags[0][0], 'qbase'))
             mqtags.append((self.changelog.parents(mqtags[0][0])[0], 'qparent'))
             for patch in mqtags:
                 if patch[1] in tagscache:
                     self.ui.warn(_('Tag %s overrides mq patch of the same name\n')
                                  % patch[1])
                 else:
                     tagscache[patch[1]] = patch[0]
 
             return tagscache
 
         def _branchtags(self, partial, lrev):
             q = self.mq
             if not q.applied:
                 return super(mqrepo, self)._branchtags(partial, lrev)
 
             cl = self.changelog
             qbasenode = bin(q.applied[0].rev)
             if qbasenode not in cl.nodemap:
                 self.ui.warn(_('mq status file refers to unknown node %s\n')
                              % short(qbasenode))
                 return super(mqrepo, self)._branchtags(partial, lrev)
 
             qbase = cl.rev(qbasenode)
             start = lrev + 1
             if start < qbase:
                 # update the cache (excluding the patches) and save it
                 self._updatebranchcache(partial, lrev+1, qbase)
                 self._writebranchcache(partial, cl.node(qbase-1), qbase-1)
                 start = qbase
             # if start = qbase, the cache is as updated as it should be.
             # if start > qbase, the cache includes (part of) the patches.
             # we might as well use it, but we won't save it.
 
             # update the cache up to the tip
             self._updatebranchcache(partial, start, len(cl))
 
             return partial
 
     if repo.local():
         repo.__class__ = mqrepo
 
 def mqimport(orig, ui, repo, *args, **kwargs):
     if hasattr(repo, 'abort_if_wdir_patched'):
         repo.abort_if_wdir_patched(_('cannot import over an applied patch'),
                                    kwargs.get('force'))
     return orig(ui, repo, *args, **kwargs)
 
 def uisetup(ui):
     extensions.wrapcommand(commands.table, 'import', mqimport)
 
 seriesopts = [('s', 'summary', None, _('print first line of patch header'))]
 
 cmdtable = {
     "qapplied": (applied, [] + seriesopts, _('hg qapplied [-s] [PATCH]')),
     "qclone":
         (clone,
          [('', 'pull', None, _('use pull protocol to copy metadata')),
           ('U', 'noupdate', None, _('do not update the new working directories')),
           ('', 'uncompressed', None,
            _('use uncompressed transfer (fast over LAN)')),
           ('p', 'patches', '', _('location of source patch repository')),
          ] + commands.remoteopts,
          _('hg qclone [OPTION]... SOURCE [DEST]')),
     "qcommit|qci":
         (commit,
          commands.table["^commit|ci"][1],
          _('hg qcommit [OPTION]... [FILE]...')),
     "^qdiff":
         (diff,
          commands.diffopts + commands.diffopts2 + commands.walkopts,
          _('hg qdiff [OPTION]... [FILE]...')),
     "qdelete|qremove|qrm":
         (delete,
          [('k', 'keep', None, _('keep patch file')),
           ('r', 'rev', [], _('stop managing a revision'))],
          _('hg qdelete [-k] [-r REV]... [PATCH]...')),
     'qfold':
         (fold,
          [('e', 'edit', None, _('edit patch header')),
           ('k', 'keep', None, _('keep folded patch files')),
          ] + commands.commitopts,
          _('hg qfold [-e] [-k] [-m TEXT] [-l FILE] PATCH...')),
     'qgoto':
         (goto,
          [('f', 'force', None, _('overwrite any local changes'))],
          _('hg qgoto [OPTION]... PATCH')),
     'qguard':
         (guard,
          [('l', 'list', None, _('list all patches and guards')),
           ('n', 'none', None, _('drop all guards'))],
          _('hg qguard [-l] [-n] -- [PATCH] [+GUARD]... [-GUARD]...')),
     'qheader': (header, [], _('hg qheader [PATCH]')),
     "^qimport":
         (qimport,
          [('e', 'existing', None, _('import file in patch directory')),
           ('n', 'name', '', _('name of patch file')),
           ('f', 'force', None, _('overwrite existing files')),
           ('r', 'rev', [], _('place existing revisions under mq control')),
           ('g', 'git', None, _('use git extended diff format')),
           ('P', 'push', None, _('qpush after importing'))],
          _('hg qimport [-e] [-n NAME] [-f] [-g] [-P] [-r REV]... FILE...')),
     "^qinit":
         (init,
          [('c', 'create-repo', None, _('create queue repository'))],
          _('hg qinit [-c]')),
     "qnew":
         (new,
          [('e', 'edit', None, _('edit commit message')),
           ('f', 'force', None, _('import uncommitted changes into patch')),
           ('g', 'git', None, _('use git extended diff format')),
           ('U', 'currentuser', None, _('add "From: <current user>" to patch')),
           ('u', 'user', '', _('add "From: <given user>" to patch')),
           ('D', 'currentdate', None, _('add "Date: <current date>" to patch')),
           ('d', 'date', '', _('add "Date: <given date>" to patch'))
           ] + commands.walkopts + commands.commitopts,
          _('hg qnew [-e] [-m TEXT] [-l FILE] [-f] PATCH [FILE]...')),
     "qnext": (next, [] + seriesopts, _('hg qnext [-s]')),
     "qprev": (prev, [] + seriesopts, _('hg qprev [-s]')),
     "^qpop":
         (pop,
          [('a', 'all', None, _('pop all patches')),
           ('n', 'name', '', _('queue name to pop')),
           ('f', 'force', None, _('forget any local changes'))],
          _('hg qpop [-a] [-n NAME] [-f] [PATCH | INDEX]')),
     "^qpush":
         (push,
          [('f', 'force', None, _('apply if the patch has rejects')),
           ('l', 'list', None, _('list patch name in commit text')),
           ('a', 'all', None, _('apply all patches')),
           ('m', 'merge', None, _('merge from another queue')),
           ('n', 'name', '', _('merge queue name'))],
          _('hg qpush [-f] [-l] [-a] [-m] [-n NAME] [PATCH | INDEX]')),
     "^qrefresh":
         (refresh,
          [('e', 'edit', None, _('edit commit message')),
           ('g', 'git', None, _('use git extended diff format')),
           ('s', 'short', None, _('refresh only files already in the patch and specified files')),
           ('U', 'currentuser', None, _('add/update "From: <current user>" in patch')),
           ('u', 'user', '', _('add/update "From: <given user>" in patch')),
           ('D', 'currentdate', None, _('update "Date: <current date>" in patch (if present)')),
           ('d', 'date', '', _('update "Date: <given date>" in patch (if present)'))
           ] + commands.walkopts + commands.commitopts,
          _('hg qrefresh [-I] [-X] [-e] [-m TEXT] [-l FILE] [-s] [FILE]...')),
     'qrename|qmv':
         (rename, [], _('hg qrename PATCH1 [PATCH2]')),
     "qrestore":
         (restore,
          [('d', 'delete', None, _('delete save entry')),
           ('u', 'update', None, _('update queue working directory'))],
          _('hg qrestore [-d] [-u] REV')),
     "qsave":
         (save,
          [('c', 'copy', None, _('copy patch directory')),
           ('n', 'name', '', _('copy directory name')),
           ('e', 'empty', None, _('clear queue status file')),
           ('f', 'force', None, _('force copy'))] + commands.commitopts,
          _('hg qsave [-m TEXT] [-l FILE] [-c] [-n NAME] [-e] [-f]')),
     "qselect":
         (select,
          [('n', 'none', None, _('disable all guards')),
           ('s', 'series', None, _('list all guards in series file')),
           ('', 'pop', None, _('pop to before first guarded applied patch')),
           ('', 'reapply', None, _('pop, then reapply patches'))],
          _('hg qselect [OPTION]... [GUARD]...')),
     "qseries":
         (series,
          [('m', 'missing', None, _('print patches not in series')),
          ] + seriesopts,
          _('hg qseries [-ms]')),
     "^strip":
         (strip,
          [('f', 'force', None, _('force removal with local changes')),
           ('b', 'backup', None, _('bundle unrelated changesets')),
           ('n', 'nobackup', None, _('no backups'))],
          _('hg strip [-f] [-b] [-n] REV')),
     "qtop": (top, [] + seriesopts, _('hg qtop [-s]')),
     "qunapplied": (unapplied, [] + seriesopts, _('hg qunapplied [-s] [PATCH]')),
     "qfinish":
         (finish,
          [('a', 'applied', None, _('finish all applied changesets'))],
          _('hg qfinish [-a] [REV...]')),
 }

hgext/notify.py

@@ -1,289 +1,289 b''
 # notify.py - email notifications for mercurial
 #
 # Copyright 2006 Vadim Gelfer <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''hook extension to email notifications on commits/pushes
+'''send e-mail notifications for commits/pushes
 
 Subscriptions can be managed through hgrc. Default mode is to print
 messages to stdout, for testing and configuring.
 
 To use, configure notify extension and enable in hgrc like this:
 
    [extensions]
    hgext.notify =
 
    [hooks]
    # one email for each incoming changeset
    incoming.notify = python:hgext.notify.hook
    # batch emails when many changesets incoming at one time
    changegroup.notify = python:hgext.notify.hook
 
    [notify]
    # config items go in here
 
  config items:
 
  REQUIRED:
    config = /path/to/file # file containing subscriptions
 
  OPTIONAL:
    test = True            # print messages to stdout for testing
    strip = 3              # number of slashes to strip for url paths
    domain = example.com   # domain to use if committer missing domain
    style = ...            # style file to use when formatting email
    template = ...         # template to use when formatting email
    incoming = ...         # template to use when run as incoming hook
    changegroup = ...      # template when run as changegroup hook
    maxdiff = 300          # max lines of diffs to include (0=none, -1=all)
    maxsubject = 67        # truncate subject line longer than this
    diffstat = True        # add a diffstat before the diff content
    sources = serve        # notify if source of incoming changes in this list
                           # (serve == ssh or http, push, pull, bundle)
    [email]
    from = [e-mail]   # email address to send as if none given
    [web]
    baseurl = http://hgserver/... # root of hg web site for browsing commits
 
  notify config file has same format as regular hgrc. it has two
  sections so you can express subscriptions in whatever way is handier
  for you.
 
    [usersubs]
    # key is subscriber email, value is ","-separated list of glob patterns
    user@host = pattern
 
    [reposubs]
    # key is glob pattern, value is ","-separated list of subscriber emails
    pattern = user@host
 
  glob patterns are matched against path to repository root.
 
  if you like, you can put notify config file in repository that users
  can push changes to, they can manage their own subscriptions.'''
 
 from mercurial.i18n import _
 from mercurial import patch, cmdutil, templater, util, mail
 import email.Parser, fnmatch, socket, time
 
 # template for single changeset can include email headers.
 single_template = '''
 Subject: changeset in {webroot}: {desc|firstline|strip}
 From: {author}
 
 changeset {node|short} in {root}
 details: {baseurl}{webroot}?cmd=changeset;node={node|short}
 description:
 \t{desc|tabindent|strip}
 '''.lstrip()
 
 # template for multiple changesets should not contain email headers,
 # because only first set of headers will be used and result will look
 # strange.
 multiple_template = '''
 changeset {node|short} in {root}
 details: {baseurl}{webroot}?cmd=changeset;node={node|short}
 summary: {desc|firstline}
 '''
 
 deftemplates = {
     'changegroup': multiple_template,
 }
 
 class notifier(object):
     '''email notification class.'''
 
     def __init__(self, ui, repo, hooktype):
         self.ui = ui
         cfg = self.ui.config('notify', 'config')
         if cfg:
             self.ui.readconfig(cfg, sections=['usersubs', 'reposubs'])
         self.repo = repo
         self.stripcount = int(self.ui.config('notify', 'strip', 0))
         self.root = self.strip(self.repo.root)
         self.domain = self.ui.config('notify', 'domain')
         self.test = self.ui.configbool('notify', 'test', True)
         self.charsets = mail._charsets(self.ui)
         self.subs = self.subscribers()
 
         mapfile = self.ui.config('notify', 'style')
         template = (self.ui.config('notify', hooktype) or
                     self.ui.config('notify', 'template'))
         self.t = cmdutil.changeset_templater(self.ui, self.repo,
                                              False, None, mapfile, False)
         if not mapfile and not template:
             template = deftemplates.get(hooktype) or single_template
         if template:
             template = templater.parsestring(template, quoted=False)
             self.t.use_template(template)
 
     def strip(self, path):
         '''strip leading slashes from local path, turn into web-safe path.'''
 
         path = util.pconvert(path)
         count = self.stripcount
         while count > 0:
             c = path.find('/')
             if c == -1:
                 break
             path = path[c+1:]
             count -= 1
         return path
 
     def fixmail(self, addr):
         '''try to clean up email addresses.'''
 
         addr = util.email(addr.strip())
         if self.domain:
             a = addr.find('@localhost')
             if a != -1:
                 addr = addr[:a]
             if '@' not in addr:
                 return addr + '@' + self.domain
         return addr
 
     def subscribers(self):
         '''return list of email addresses of subscribers to this repo.'''
         subs = set()
         for user, pats in self.ui.configitems('usersubs'):
             for pat in pats.split(','):
                 if fnmatch.fnmatch(self.repo.root, pat.strip()):
                     subs.add(self.fixmail(user))
         for pat, users in self.ui.configitems('reposubs'):
             if fnmatch.fnmatch(self.repo.root, pat):
                 for user in users.split(','):
                     subs.add(self.fixmail(user))
         return [mail.addressencode(self.ui, s, self.charsets, self.test)
                 for s in sorted(subs)]
 
     def url(self, path=None):
         return self.ui.config('web', 'baseurl') + (path or self.root)
 
     def node(self, ctx):
         '''format one changeset.'''
         self.t.show(ctx, changes=ctx.changeset(),
                     baseurl=self.ui.config('web', 'baseurl'),
                     root=self.repo.root, webroot=self.root)
 
     def skipsource(self, source):
         '''true if incoming changes from this source should be skipped.'''
         ok_sources = self.ui.config('notify', 'sources', 'serve').split()
         return source not in ok_sources
 
     def send(self, ctx, count, data):
         '''send message.'''
 
         p = email.Parser.Parser()
         msg = p.parsestr(data)
 
         # store sender and subject
         sender, subject = msg['From'], msg['Subject']
         del msg['From'], msg['Subject']
         # store remaining headers
         headers = msg.items()
         # create fresh mime message from msg body
         text = msg.get_payload()
         # for notification prefer readability over data precision
         msg = mail.mimeencode(self.ui, text, self.charsets, self.test)
         # reinstate custom headers
         for k, v in headers:
             msg[k] = v
 
         msg['Date'] = util.datestr(format="%a, %d %b %Y %H:%M:%S %1%2")
 
         # try to make subject line exist and be useful
         if not subject:
             if count > 1:
                 subject = _('%s: %d new changesets') % (self.root, count)
             else:
                 s = ctx.description().lstrip().split('\n', 1)[0].rstrip()
                 subject = '%s: %s' % (self.root, s)
         maxsubject = int(self.ui.config('notify', 'maxsubject', 67))
         if maxsubject and len(subject) > maxsubject:
             subject = subject[:maxsubject-3] + '...'
         msg['Subject'] = mail.headencode(self.ui, subject,
                                          self.charsets, self.test)
 
         # try to make message have proper sender
         if not sender:
             sender = self.ui.config('email', 'from') or self.ui.username()
         if '@' not in sender or '@localhost' in sender:
             sender = self.fixmail(sender)
         msg['From'] = mail.addressencode(self.ui, sender,
                                          self.charsets, self.test)
 
         msg['X-Hg-Notification'] = 'changeset %s' % ctx
         if not msg['Message-Id']:
             msg['Message-Id'] = ('<hg.%s.%s.%s@%s>' %
                                  (ctx, int(time.time()),
                                   hash(self.repo.root), socket.getfqdn()))
         msg['To'] = ', '.join(self.subs)
 
         msgtext = msg.as_string(0)
         if self.test:
             self.ui.write(msgtext)
             if not msgtext.endswith('\n'):
                 self.ui.write('\n')
         else:
             self.ui.status(_('notify: sending %d subscribers %d changes\n') %
                            (len(self.subs), count))
             mail.sendmail(self.ui, util.email(msg['From']),
                           self.subs, msgtext)
 
     def diff(self, ctx, ref=None):
 
         maxdiff = int(self.ui.config('notify', 'maxdiff', 300))
         prev = ctx.parents()[0].node()
         ref = ref and ref.node() or ctx.node()
         chunks = patch.diff(self.repo, prev, ref, opts=patch.diffopts(self.ui))
         difflines = ''.join(chunks).splitlines()
 
         if self.ui.configbool('notify', 'diffstat', True):
             s = patch.diffstat(difflines)
             # s may be nil, don't include the header if it is
             if s:
                 self.ui.write('\ndiffstat:\n\n%s' % s)
 
         if maxdiff == 0:
             return
         elif maxdiff > 0 and len(difflines) > maxdiff:
             msg = _('\ndiffs (truncated from %d to %d lines):\n\n')
             self.ui.write(msg % (len(difflines), maxdiff))
             difflines = difflines[:maxdiff]
         elif difflines:
             self.ui.write(_('\ndiffs (%d lines):\n\n') % len(difflines))
 
         self.ui.write("\n".join(difflines))
 
 def hook(ui, repo, hooktype, node=None, source=None, **kwargs):
     '''send email notifications to interested subscribers.
 
     if used as changegroup hook, send one email for all changesets in
     changegroup. else send one email per changeset.'''
 
     n = notifier(ui, repo, hooktype)
     ctx = repo[node]
 
     if not n.subs:
         ui.debug(_('notify: no subscribers to repository %s\n') % n.root)
         return
     if n.skipsource(source):
         ui.debug(_('notify: changes have source "%s" - skipping\n') % source)
         return
 
     ui.pushbuffer()
     if hooktype == 'changegroup':
         start, end = ctx.rev(), len(repo)
         count = end - start
         for rev in xrange(start, end):
             n.node(repo[rev])
         n.diff(ctx, repo['tip'])
     else:
         count = 1
         n.node(ctx)
         n.diff(ctx)
 
     data = ui.popbuffer()
     n.send(ctx, count, data)

hgext/pager.py

@@ -1,64 +1,64 b''
 # pager.py - display output using a pager
 #
 # Copyright 2008 David Soria Parra <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 #
 # To load the extension, add it to your .hgrc file:
 #
 #   [extension]
 #   hgext.pager =
 #
 # Run "hg help pager" to get info on configuration.
 
-'''browse command output with external pager
+'''browse command output with an external pager
 
 To set the pager that should be used, set the application variable:
 
   [pager]
   pager = LESS='FSRX' less
 
 If no pager is set, the pager extensions uses the environment variable
 $PAGER. If neither pager.pager, nor $PAGER is set, no pager is used.
 
 If you notice "BROKEN PIPE" error messages, you can disable them by
 setting:
 
   [pager]
   quiet = True
 
 You can disable the pager for certain commands by adding them to the
 pager.ignore list:
 
   [pager]
   ignore = version, help, update
 
 You can also enable the pager only for certain commands using
 pager.attend:
 
   [pager]
   attend = log
 
 If pager.attend is present, pager.ignore will be ignored.
 
 To ignore global commands like "hg version" or "hg help", you have to
 specify them in the global .hgrc
 '''
 
 import sys, os, signal
 from mercurial import dispatch, util, extensions
 
 def uisetup(ui):
     def pagecmd(orig, ui, options, cmd, cmdfunc):
         p = ui.config("pager", "pager", os.environ.get("PAGER"))
         if p and sys.stdout.isatty() and '--debugger' not in sys.argv:
             attend = ui.configlist('pager', 'attend')
             if (cmd in attend or
                 (cmd not in ui.configlist('pager', 'ignore') and not attend)):
                 sys.stderr = sys.stdout = util.popen(p, "wb")
                 if ui.configbool('pager', 'quiet'):
                     signal.signal(signal.SIGPIPE, signal.SIG_DFL)
         return orig(ui, options, cmd, cmdfunc)
 
     extensions.wrapfunction(dispatch, '_runcommand', pagecmd)

hgext/parentrevspec.py

@@ -1,96 +1,96 b''
 # Mercurial extension to make it easy to refer to the parent of a revision
 #
 # Copyright (C) 2007 Alexis S. L. Carvalho <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''use suffixes to refer to ancestor revisions
+'''interpret suffixes to refer to ancestor revisions
 
 This extension allows you to use git-style suffixes to refer to the
 ancestors of a specific revision.
 
 For example, if you can refer to a revision as "foo", then:
 
 - foo^N = Nth parent of foo
   foo^0 = foo
   foo^1 = first parent of foo
   foo^2 = second parent of foo
   foo^  = foo^1
 
 - foo~N = Nth first grandparent of foo
   foo~0 = foo
   foo~1 = foo^1 = foo^ = first parent of foo
   foo~2 = foo^1^1 = foo^^ = first parent of first parent of foo
 '''
 from mercurial import error
 
 def reposetup(ui, repo):
     if not repo.local():
         return
 
     class parentrevspecrepo(repo.__class__):
         def lookup(self, key):
             try:
                 _super = super(parentrevspecrepo, self)
                 return _super.lookup(key)
             except error.RepoError:
                 pass
 
             circ = key.find('^')
             tilde = key.find('~')
             if circ < 0 and tilde < 0:
                 raise
             elif circ >= 0 and tilde >= 0:
                 end = min(circ, tilde)
             else:
                 end = max(circ, tilde)
 
             cl = self.changelog
             base = key[:end]
             try:
                 node = _super.lookup(base)
             except error.RepoError:
                 # eek - reraise the first error
                 return _super.lookup(key)
 
             rev = cl.rev(node)
             suffix = key[end:]
             i = 0
             while i < len(suffix):
                 # foo^N => Nth parent of foo
                 # foo^0 == foo
                 # foo^1 == foo^ == 1st parent of foo
                 # foo^2 == 2nd parent of foo
                 if suffix[i] == '^':
                     j = i + 1
                     p = cl.parentrevs(rev)
                     if j < len(suffix) and suffix[j].isdigit():
                         j += 1
                         n = int(suffix[i+1:j])
                         if n > 2 or n == 2 and p[1] == -1:
                             raise
                     else:
                         n = 1
                     if n:
                         rev = p[n - 1]
                     i = j
                 # foo~N => Nth first grandparent of foo
                 # foo~0 = foo
                 # foo~1 = foo^1 == foo^ == 1st parent of foo
                 # foo~2 = foo^1^1 == foo^^ == 1st parent of 1st parent of foo
                 elif suffix[i] == '~':
                     j = i + 1
                     while j < len(suffix) and suffix[j].isdigit():
                         j += 1
                     if j == i + 1:
                         raise
                     n = int(suffix[i+1:j])
                     for k in xrange(n):
                         rev = cl.parentrevs(rev)[0]
                     i = j
                 else:
                     raise
             return cl.node(rev)
 
     repo.__class__ = parentrevspecrepo

hgext/patchbomb.py

@@ -1,507 +1,507 b''
 # patchbomb.py - sending Mercurial changesets as patch emails
 #
 #  Copyright 2005-2009 Matt Mackall <[e-mail]> and others
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''sending Mercurial changesets as a series of patch emails
+'''send Mercurial changesets as a series of patch e-mails
 
 The series is started off with a "[PATCH 0 of N]" introduction, which
 describes the series as a whole.
 
 Each patch email has a Subject line of "[PATCH M of N] ...", using the
 first line of the changeset description as the subject text. The
 message contains two or three body parts:
 
   The changeset description.
 
   [Optional] The result of running diffstat on the patch.
 
   The patch itself, as generated by "hg export".
 
 Each message refers to the first in the series using the In-Reply-To
 and References headers, so they will show up as a sequence in threaded
 mail and news readers, and in mail archives.
 
 With the -d/--diffstat option, you will be prompted for each changeset
 with a diffstat summary and the changeset summary, so you can be sure
 you are sending the right changes.
 
 To configure other defaults, add a section like this to your hgrc
 file:
 
   [email]
   from = My Name <my@email>
   to = recipient1, recipient2, ...
   cc = cc1, cc2, ...
   bcc = bcc1, bcc2, ...
 
 Then you can use the "hg email" command to mail a series of changesets
 as a patchbomb.
 
 To avoid sending patches prematurely, it is a good idea to first run
 the "email" command with the "-n" option (test only). You will be
 prompted for an email recipient address, a subject and an introductory
 message describing the patches of your patchbomb. Then when all is
 done, patchbomb messages are displayed. If the PAGER environment
 variable is set, your pager will be fired up once for each patchbomb
 message, so you can verify everything is alright.
 
 The -m/--mbox option is also very useful. Instead of previewing each
 patchbomb message in a pager or sending the messages directly, it will
 create a UNIX mailbox file with the patch emails. This mailbox file
 can be previewed with any mail user agent which supports UNIX mbox
 files, e.g. with mutt:
 
   % mutt -R -f mbox
 
 When you are previewing the patchbomb messages, you can use `formail'
 (a utility that is commonly installed as part of the procmail
 package), to send each message out:
 
   % formail -s sendmail -bm -t < mbox
 
 That should be all. Now your patchbomb is on its way out.
 
 You can also either configure the method option in the email section
 to be a sendmail compatible mailer or fill out the [smtp] section so
 that the patchbomb extension can automatically send patchbombs
 directly from the commandline. See the [email] and [smtp] sections in
 hgrc(5) for details.'''
 
 import os, errno, socket, tempfile, cStringIO
 import email.MIMEMultipart, email.MIMEBase
 import email.Utils, email.Encoders, email.Generator
 from mercurial import cmdutil, commands, hg, mail, patch, util
 from mercurial.i18n import _
 from mercurial.node import bin
 
 def prompt(ui, prompt, default=None, rest=': ', empty_ok=False):
     if not ui.interactive():
         return default
     if default:
         prompt += ' [%s]' % default
     prompt += rest
     while True:
         r = ui.prompt(prompt, default=default)
         if r:
             return r
         if default is not None:
             return default
         if empty_ok:
             return r
         ui.warn(_('Please enter a valid value.\n'))
 
 def cdiffstat(ui, summary, patchlines):
     s = patch.diffstat(patchlines)
     if summary:
         ui.write(summary, '\n')
         ui.write(s, '\n')
     ans = prompt(ui, _('does the diffstat above look okay? '), 'y')
     if not ans.lower().startswith('y'):
         raise util.Abort(_('diffstat rejected'))
     return s
 
 def makepatch(ui, repo, patch, opts, _charsets, idx, total, patchname=None):
 
     desc = []
     node = None
     body = ''
 
     for line in patch:
         if line.startswith('#'):
             if line.startswith('# Node ID'):
                 node = line.split()[-1]
             continue
         if line.startswith('diff -r') or line.startswith('diff --git'):
             break
         desc.append(line)
 
     if not patchname and not node:
         raise ValueError
 
     if opts.get('attach'):
         body = ('\n'.join(desc[1:]).strip() or
                 'Patch subject is complete summary.')
         body += '\n\n\n'
 
     if opts.get('plain'):
         while patch and patch[0].startswith('# '):
             patch.pop(0)
         if patch:
             patch.pop(0)
         while patch and not patch[0].strip():
             patch.pop(0)
 
     if opts.get('diffstat'):
         body += cdiffstat(ui, '\n'.join(desc), patch) + '\n\n'
 
     if opts.get('attach') or opts.get('inline'):
         msg = email.MIMEMultipart.MIMEMultipart()
         if body:
             msg.attach(mail.mimeencode(ui, body, _charsets, opts.get('test')))
         p = mail.mimetextpatch('\n'.join(patch), 'x-patch', opts.get('test'))
         binnode = bin(node)
         # if node is mq patch, it will have the patch file's name as a tag
         if not patchname:
             patchtags = [t for t in repo.nodetags(binnode)
                          if t.endswith('.patch') or t.endswith('.diff')]
             if patchtags:
                 patchname = patchtags[0]
             elif total > 1:
                 patchname = cmdutil.make_filename(repo, '%b-%n.patch',
                                                   binnode, seqno=idx, total=total)
             else:
                 patchname = cmdutil.make_filename(repo, '%b.patch', binnode)
         disposition = 'inline'
         if opts.get('attach'):
             disposition = 'attachment'
         p['Content-Disposition'] = disposition + '; filename=' + patchname
         msg.attach(p)
     else:
         body += '\n'.join(patch)
         msg = mail.mimetextpatch(body, display=opts.get('test'))
 
     subj = desc[0].strip().rstrip('. ')
     if total == 1 and not opts.get('intro'):
         subj = '[PATCH] ' + (opts.get('subject') or subj)
     else:
         tlen = len(str(total))
         subj = '[PATCH %0*d of %d] %s' % (tlen, idx, total, subj)
     msg['Subject'] = mail.headencode(ui, subj, _charsets, opts.get('test'))
     msg['X-Mercurial-Node'] = node
     return msg, subj
 
 def patchbomb(ui, repo, *revs, **opts):
     '''send changesets by email
 
     By default, diffs are sent in the format generated by hg export,
     one per message. The series starts with a "[PATCH 0 of N]"
     introduction, which describes the series as a whole.
 
     Each patch email has a Subject line of "[PATCH M of N] ...", using
     the first line of the changeset description as the subject text.
     The message contains two or three parts. First, the changeset
     description. Next, (optionally) if the diffstat program is
     installed and -d/--diffstat is used, the result of running
     diffstat on the patch. Finally, the patch itself, as generated by
     "hg export".
 
     By default the patch is included as text in the email body for
     easy reviewing. Using the -a/--attach option will instead create
     an attachment for the patch. With -i/--inline an inline attachment
     will be created.
 
     With -o/--outgoing, emails will be generated for patches not found
     in the destination repository (or only those which are ancestors
     of the specified revisions if any are provided)
 
     With -b/--bundle, changesets are selected as for --outgoing, but a
     single email containing a binary Mercurial bundle as an attachment
     will be sent.
 
     Examples:
 
     hg email -r 3000          # send patch 3000 only
     hg email -r 3000 -r 3001  # send patches 3000 and 3001
     hg email -r 3000:3005     # send patches 3000 through 3005
     hg email 3000             # send patch 3000 (deprecated)
 
     hg email -o               # send all patches not in default
     hg email -o DEST          # send all patches not in DEST
     hg email -o -r 3000       # send all ancestors of 3000 not in default
     hg email -o -r 3000 DEST  # send all ancestors of 3000 not in DEST
 
     hg email -b               # send bundle of all patches not in default
     hg email -b DEST          # send bundle of all patches not in DEST
     hg email -b -r 3000       # bundle of all ancestors of 3000 not in default
     hg email -b -r 3000 DEST  # bundle of all ancestors of 3000 not in DEST
 
     Before using this command, you will need to enable email in your
     hgrc. See the [email] section in hgrc(5) for details.
     '''
 
     _charsets = mail._charsets(ui)
 
     def outgoing(dest, revs):
         '''Return the revisions present locally but not in dest'''
         dest = ui.expandpath(dest or 'default-push', dest or 'default')
         revs = [repo.lookup(rev) for rev in revs]
         other = hg.repository(cmdutil.remoteui(repo, opts), dest)
         ui.status(_('comparing with %s\n') % dest)
         o = repo.findoutgoing(other)
         if not o:
             ui.status(_("no changes found\n"))
             return []
         o = repo.changelog.nodesbetween(o, revs or None)[0]
         return [str(repo.changelog.rev(r)) for r in o]
 
     def getpatches(revs):
         for r in cmdutil.revrange(repo, revs):
             output = cStringIO.StringIO()
             patch.export(repo, [r], fp=output,
                          opts=patch.diffopts(ui, opts))
             yield output.getvalue().split('\n')
 
     def getbundle(dest):
         tmpdir = tempfile.mkdtemp(prefix='hg-email-bundle-')
         tmpfn = os.path.join(tmpdir, 'bundle')
         try:
             commands.bundle(ui, repo, tmpfn, dest, **opts)
             return open(tmpfn, 'rb').read()
         finally:
             try:
                 os.unlink(tmpfn)
             except:
                 pass
             os.rmdir(tmpdir)
 
     if not (opts.get('test') or opts.get('mbox')):
         # really sending
         mail.validateconfig(ui)
 
     if not (revs or opts.get('rev')
             or opts.get('outgoing') or opts.get('bundle')
             or opts.get('patches')):
         raise util.Abort(_('specify at least one changeset with -r or -o'))
 
     if opts.get('outgoing') and opts.get('bundle'):
         raise util.Abort(_("--outgoing mode always on with --bundle;"
                            " do not re-specify --outgoing"))
 
     if opts.get('outgoing') or opts.get('bundle'):
         if len(revs) > 1:
             raise util.Abort(_("too many destinations"))
         dest = revs and revs[0] or None
         revs = []
 
     if opts.get('rev'):
         if revs:
             raise util.Abort(_('use only one form to specify the revision'))
         revs = opts.get('rev')
 
     if opts.get('outgoing'):
         revs = outgoing(dest, opts.get('rev'))
     if opts.get('bundle'):
         opts['revs'] = revs
 
     # start
     if opts.get('date'):
         start_time = util.parsedate(opts.get('date'))
     else:
         start_time = util.makedate()
 
     def genmsgid(id):
         return '<%s.%s@%s>' % (id[:20], int(start_time[0]), socket.getfqdn())
 
     def getdescription(body, sender):
         if opts.get('desc'):
             body = open(opts.get('desc')).read()
         else:
             ui.write(_('\nWrite the introductory message for the '
                        'patch series.\n\n'))
             body = ui.edit(body, sender)
         return body
 
     def getpatchmsgs(patches, patchnames=None):
         jumbo = []
         msgs = []
 
         ui.write(_('This patch series consists of %d patches.\n\n')
                  % len(patches))
 
         name = None
         for i, p in enumerate(patches):
             jumbo.extend(p)
             if patchnames:
                 name = patchnames[i]
             msg = makepatch(ui, repo, p, opts, _charsets, i + 1,
                             len(patches), name)
             msgs.append(msg)
 
         if len(patches) > 1 or opts.get('intro'):
             tlen = len(str(len(patches)))
 
             subj = '[PATCH %0*d of %d] %s' % (
                 tlen, 0, len(patches),
                 opts.get('subject') or
                 prompt(ui, 'Subject:',
                        rest=' [PATCH %0*d of %d] ' % (tlen, 0, len(patches))))
 
             body = ''
             if opts.get('diffstat'):
                 d = cdiffstat(ui, _('Final summary:\n'), jumbo)
                 if d:
                     body = '\n' + d
 
             body = getdescription(body, sender)
             msg = mail.mimeencode(ui, body, _charsets, opts.get('test'))
             msg['Subject'] = mail.headencode(ui, subj, _charsets,
                                              opts.get('test'))
 
             msgs.insert(0, (msg, subj))
         return msgs
 
     def getbundlemsgs(bundle):
         subj = (opts.get('subject')
                 or prompt(ui, 'Subject:', 'A bundle for your repository'))
 
         body = getdescription('', sender)
         msg = email.MIMEMultipart.MIMEMultipart()
         if body:
             msg.attach(mail.mimeencode(ui, body, _charsets, opts.get('test')))
         datapart = email.MIMEBase.MIMEBase('application', 'x-mercurial-bundle')
         datapart.set_payload(bundle)
         bundlename = '%s.hg' % opts.get('bundlename', 'bundle')
         datapart.add_header('Content-Disposition', 'attachment',
                             filename=bundlename)
         email.Encoders.encode_base64(datapart)
         msg.attach(datapart)
         msg['Subject'] = mail.headencode(ui, subj, _charsets, opts.get('test'))
         return [(msg, subj)]
 
     sender = (opts.get('from') or ui.config('email', 'from') or
               ui.config('patchbomb', 'from') or
               prompt(ui, 'From', ui.username()))
 
     # internal option used by pbranches
     patches = opts.get('patches')
     if patches:
         msgs = getpatchmsgs(patches, opts.get('patchnames'))
     elif opts.get('bundle'):
         msgs = getbundlemsgs(getbundle(dest))
     else:
         msgs = getpatchmsgs(list(getpatches(revs)))
 
     def getaddrs(opt, prpt, default = None):
         addrs = opts.get(opt) or (ui.config('email', opt) or
                                   ui.config('patchbomb', opt) or
                                   prompt(ui, prpt, default)).split(',')
         return [mail.addressencode(ui, a.strip(), _charsets, opts.get('test'))
                 for a in addrs if a.strip()]
 
     to = getaddrs('to', 'To')
     cc = getaddrs('cc', 'Cc', '')
 
     bcc = opts.get('bcc') or (ui.config('email', 'bcc') or
                           ui.config('patchbomb', 'bcc') or '').split(',')
     bcc = [mail.addressencode(ui, a.strip(), _charsets, opts.get('test'))
            for a in bcc if a.strip()]
 
     ui.write('\n')
 
     parent = opts.get('in_reply_to') or None
     # angle brackets may be omitted, they're not semantically part of the msg-id
     if parent is not None:
         if not parent.startswith('<'):
             parent = '<' + parent
         if not parent.endswith('>'):
             parent += '>'
 
     first = True
 
     sender_addr = email.Utils.parseaddr(sender)[1]
     sender = mail.addressencode(ui, sender, _charsets, opts.get('test'))
     sendmail = None
     for m, subj in msgs:
         try:
             m['Message-Id'] = genmsgid(m['X-Mercurial-Node'])
         except TypeError:
             m['Message-Id'] = genmsgid('patchbomb')
         if parent:
             m['In-Reply-To'] = parent
             m['References'] = parent
         if first:
             parent = m['Message-Id']
             first = False
 
         m['User-Agent'] = 'Mercurial-patchbomb/%s' % util.version()
         m['Date'] = email.Utils.formatdate(start_time[0])
 
         start_time = (start_time[0] + 1, start_time[1])
         m['From'] = sender
         m['To'] = ', '.join(to)
         if cc:
             m['Cc']  = ', '.join(cc)
         if bcc:
             m['Bcc'] = ', '.join(bcc)
         if opts.get('test'):
             ui.status(_('Displaying '), subj, ' ...\n')
             ui.flush()
             if 'PAGER' in os.environ:
                 fp = util.popen(os.environ['PAGER'], 'w')
             else:
                 fp = ui
             generator = email.Generator.Generator(fp, mangle_from_=False)
             try:
                 generator.flatten(m, 0)
                 fp.write('\n')
             except IOError, inst:
                 if inst.errno != errno.EPIPE:
                     raise
             if fp is not ui:
                 fp.close()
         elif opts.get('mbox'):
             ui.status(_('Writing '), subj, ' ...\n')
             fp = open(opts.get('mbox'), 'In-Reply-To' in m and 'ab+' or 'wb+')
             generator = email.Generator.Generator(fp, mangle_from_=True)
             date = util.datestr(start_time, '%a %b %d %H:%M:%S %Y')
             fp.write('From %s %s\n' % (sender_addr, date))
             generator.flatten(m, 0)
             fp.write('\n\n')
             fp.close()
         else:
             if not sendmail:
                 sendmail = mail.connect(ui)
             ui.status(_('Sending '), subj, ' ...\n')
             # Exim does not remove the Bcc field
             del m['Bcc']
             fp = cStringIO.StringIO()
             generator = email.Generator.Generator(fp, mangle_from_=False)
             generator.flatten(m, 0)
             sendmail(sender, to + bcc + cc, fp.getvalue())
 
 emailopts = [
           ('a', 'attach', None, _('send patches as attachments')),
           ('i', 'inline', None, _('send patches as inline attachments')),
           ('', 'bcc', [], _('email addresses of blind carbon copy recipients')),
           ('c', 'cc', [], _('email addresses of copy recipients')),
           ('d', 'diffstat', None, _('add diffstat output to messages')),
           ('', 'date', '', _('use the given date as the sending date')),
           ('', 'desc', '', _('use the given file as the series description')),
           ('f', 'from', '', _('email address of sender')),
           ('n', 'test', None, _('print messages that would be sent')),
           ('m', 'mbox', '',
            _('write messages to mbox file instead of sending them')),
           ('s', 'subject', '',
            _('subject of first message (intro or single patch)')),
           ('', 'in-reply-to', '',
            _('message identifier to reply to')),
           ('t', 'to', [], _('email addresses of recipients')),
          ]
 
 
 cmdtable = {
     "email":
         (patchbomb,
          [('g', 'git', None, _('use git extended diff format')),
           ('', 'plain', None, _('omit hg patch header')),
           ('o', 'outgoing', None,
            _('send changes not found in the target repository')),
           ('b', 'bundle', None,
            _('send changes not in target as a binary bundle')),
           ('', 'bundlename', 'bundle',
            _('name of the bundle attachment file')),
           ('r', 'rev', [], _('a revision to send')),
           ('', 'force', None,
            _('run even when remote repository is unrelated '
              '(with -b/--bundle)')),
           ('', 'base', [],
            _('a base changeset to specify instead of a destination '
              '(with -b/--bundle)')),
           ('', 'intro', None,
            _('send an introduction email for a single patch')),
          ] + emailopts + commands.remoteopts,
          _('hg email [OPTION]... [DEST]...'))
 }

hgext/purge.py

@@ -1,108 +1,108 b''
 # Copyright (C) 2006 - Marco Barisione <[e-mail]>
 #
 # This is a small extension for Mercurial (http://www.selenic.com/mercurial)
 # that removes files not known to mercurial
 #
 # This program was inspired by the "cvspurge" script contained in CVS utilities
 # (http://www.red-bean.com/cvsutils/).
 #
 # For help on the usage of "hg purge" use:
 #  hg help purge
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 
-'''enable removing untracked files only'''
+'''delete files not tracked from the working directory'''
 
 from mercurial import util, commands, cmdutil
 from mercurial.i18n import _
 import os, stat
 
 def purge(ui, repo, *dirs, **opts):
     '''removes files not tracked by Mercurial
 
     Delete files not known to Mercurial. This is useful to test local
     and uncommitted changes in an otherwise-clean source tree.
 
     This means that purge will delete:
      - Unknown files: files marked with "?" by "hg status"
      - Empty directories: in fact Mercurial ignores directories unless
        they contain files under source control management
     But it will leave untouched:
      - Modified and unmodified tracked files
      - Ignored files (unless --all is specified)
      - New files added to the repository (with "hg add")
 
     If directories are given on the command line, only files in these
     directories are considered.
 
     Be careful with purge, as you could irreversibly delete some files
     you forgot to add to the repository. If you only want to print the
     list of files that this program would delete, use the --print
     option.
     '''
     act = not opts['print']
     eol = '\n'
     if opts['print0']:
         eol = '\0'
         act = False # --print0 implies --print
 
     def remove(remove_func, name):
         if act:
             try:
                 remove_func(repo.wjoin(name))
             except OSError:
                 m = _('%s cannot be removed') % name
                 if opts['abort_on_err']:
                     raise util.Abort(m)
                 ui.warn(_('warning: %s\n') % m)
         else:
             ui.write('%s%s' % (name, eol))
 
     def removefile(path):
         try:
             os.remove(path)
         except OSError:
             # read-only files cannot be unlinked under Windows
             s = os.stat(path)
             if (s.st_mode & stat.S_IWRITE) != 0:
                 raise
             os.chmod(path, stat.S_IMODE(s.st_mode) | stat.S_IWRITE)
             os.remove(path)
 
     directories = []
     match = cmdutil.match(repo, dirs, opts)
     match.dir = directories.append
     status = repo.status(match=match, ignored=opts['all'], unknown=True)
 
     for f in sorted(status[4] + status[5]):
         ui.note(_('Removing file %s\n') % f)
         remove(removefile, f)
 
     for f in sorted(directories, reverse=True):
         if match(f) and not os.listdir(repo.wjoin(f)):
             ui.note(_('Removing directory %s\n') % f)
             remove(os.rmdir, f)
 
 cmdtable = {
     'purge|clean':
         (purge,
          [('a', 'abort-on-err', None, _('abort if an error occurs')),
           ('',  'all', None, _('purge ignored files too')),
           ('p', 'print', None, _('print filenames instead of deleting them')),
           ('0', 'print0', None, _('end filenames with NUL, for use with xargs'
                                   ' (implies -p/--print)')),
          ] + commands.walkopts,
          _('hg purge [OPTION]... [DIR]...'))
 }

hgext/record.py

@@ -1,548 +1,548 b''
 # record.py
 #
 # Copyright 2007 Bryan O'Sullivan <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''interactive change selection during commit or qrefresh'''
+'''interactively select which sets of changes to commit/qrefresh'''
 
 from mercurial.i18n import gettext, _
 from mercurial import cmdutil, commands, extensions, hg, mdiff, patch
 from mercurial import util
 import copy, cStringIO, errno, operator, os, re, tempfile
 
 lines_re = re.compile(r'@@ -(\d+),(\d+) \+(\d+),(\d+) @@\s*(.*)')
 
 def scanpatch(fp):
     """like patch.iterhunks, but yield different events
 
     - ('file',    [header_lines + fromfile + tofile])
     - ('context', [context_lines])
     - ('hunk',    [hunk_lines])
     - ('range',   (-start,len, +start,len, diffp))
     """
     lr = patch.linereader(fp)
 
     def scanwhile(first, p):
         """scan lr while predicate holds"""
         lines = [first]
         while True:
             line = lr.readline()
             if not line:
                 break
             if p(line):
                 lines.append(line)
             else:
                 lr.push(line)
                 break
         return lines
 
     while True:
         line = lr.readline()
         if not line:
             break
         if line.startswith('diff --git a/'):
             def notheader(line):
                 s = line.split(None, 1)
                 return not s or s[0] not in ('---', 'diff')
             header = scanwhile(line, notheader)
             fromfile = lr.readline()
             if fromfile.startswith('---'):
                 tofile = lr.readline()
                 header += [fromfile, tofile]
             else:
                 lr.push(fromfile)
             yield 'file', header
         elif line[0] == ' ':
             yield 'context', scanwhile(line, lambda l: l[0] in ' \\')
         elif line[0] in '-+':
             yield 'hunk', scanwhile(line, lambda l: l[0] in '-+\\')
         else:
             m = lines_re.match(line)
             if m:
                 yield 'range', m.groups()
             else:
                 raise patch.PatchError('unknown patch content: %r' % line)
 
 class header(object):
     """patch header
 
     XXX shoudn't we move this to mercurial/patch.py ?
     """
     diff_re = re.compile('diff --git a/(.*) b/(.*)$')
     allhunks_re = re.compile('(?:index|new file|deleted file) ')
     pretty_re = re.compile('(?:new file|deleted file) ')
     special_re = re.compile('(?:index|new|deleted|copy|rename) ')
 
     def __init__(self, header):
         self.header = header
         self.hunks = []
 
     def binary(self):
         for h in self.header:
             if h.startswith('index '):
                 return True
 
     def pretty(self, fp):
         for h in self.header:
             if h.startswith('index '):
                 fp.write(_('this modifies a binary file (all or nothing)\n'))
                 break
             if self.pretty_re.match(h):
                 fp.write(h)
                 if self.binary():
                     fp.write(_('this is a binary file\n'))
                 break
             if h.startswith('---'):
                 fp.write(_('%d hunks, %d lines changed\n') %
                          (len(self.hunks),
                           sum([h.added + h.removed for h in self.hunks])))
                 break
             fp.write(h)
 
     def write(self, fp):
         fp.write(''.join(self.header))
 
     def allhunks(self):
         for h in self.header:
             if self.allhunks_re.match(h):
                 return True
 
     def files(self):
         fromfile, tofile = self.diff_re.match(self.header[0]).groups()
         if fromfile == tofile:
             return [fromfile]
         return [fromfile, tofile]
 
     def filename(self):
         return self.files()[-1]
 
     def __repr__(self):
         return '<header %s>' % (' '.join(map(repr, self.files())))
 
     def special(self):
         for h in self.header:
             if self.special_re.match(h):
                 return True
 
 def countchanges(hunk):
     """hunk -> (n+,n-)"""
     add = len([h for h in hunk if h[0] == '+'])
     rem = len([h for h in hunk if h[0] == '-'])
     return add, rem
 
 class hunk(object):
     """patch hunk
 
     XXX shouldn't we merge this with patch.hunk ?
     """
     maxcontext = 3
 
     def __init__(self, header, fromline, toline, proc, before, hunk, after):
         def trimcontext(number, lines):
             delta = len(lines) - self.maxcontext
             if False and delta > 0:
                 return number + delta, lines[:self.maxcontext]
             return number, lines
 
         self.header = header
         self.fromline, self.before = trimcontext(fromline, before)
         self.toline, self.after = trimcontext(toline, after)
         self.proc = proc
         self.hunk = hunk
         self.added, self.removed = countchanges(self.hunk)
 
     def write(self, fp):
         delta = len(self.before) + len(self.after)
         if self.after and self.after[-1] == '\\ No newline at end of file\n':
             delta -= 1
         fromlen = delta + self.removed
         tolen = delta + self.added
         fp.write('@@ -%d,%d +%d,%d @@%s\n' %
                  (self.fromline, fromlen, self.toline, tolen,
                   self.proc and (' ' + self.proc)))
         fp.write(''.join(self.before + self.hunk + self.after))
 
     pretty = write
 
     def filename(self):
         return self.header.filename()
 
     def __repr__(self):
         return '<hunk %r@%d>' % (self.filename(), self.fromline)
 
 def parsepatch(fp):
     """patch -> [] of hunks """
     class parser(object):
         """patch parsing state machine"""
         def __init__(self):
             self.fromline = 0
             self.toline = 0
             self.proc = ''
             self.header = None
             self.context = []
             self.before = []
             self.hunk = []
             self.stream = []
 
         def addrange(self, (fromstart, fromend, tostart, toend, proc)):
             self.fromline = int(fromstart)
             self.toline = int(tostart)
             self.proc = proc
 
         def addcontext(self, context):
             if self.hunk:
                 h = hunk(self.header, self.fromline, self.toline, self.proc,
                          self.before, self.hunk, context)
                 self.header.hunks.append(h)
                 self.stream.append(h)
                 self.fromline += len(self.before) + h.removed
                 self.toline += len(self.before) + h.added
                 self.before = []
                 self.hunk = []
                 self.proc = ''
             self.context = context
 
         def addhunk(self, hunk):
             if self.context:
                 self.before = self.context
                 self.context = []
             self.hunk = hunk
 
         def newfile(self, hdr):
             self.addcontext([])
             h = header(hdr)
             self.stream.append(h)
             self.header = h
 
         def finished(self):
             self.addcontext([])
             return self.stream
 
         transitions = {
             'file': {'context': addcontext,
                      'file': newfile,
                      'hunk': addhunk,
                      'range': addrange},
             'context': {'file': newfile,
                         'hunk': addhunk,
                         'range': addrange},
             'hunk': {'context': addcontext,
                      'file': newfile,
                      'range': addrange},
             'range': {'context': addcontext,
                       'hunk': addhunk},
             }
 
     p = parser()
 
     state = 'context'
     for newstate, data in scanpatch(fp):
         try:
             p.transitions[state][newstate](p, data)
         except KeyError:
             raise patch.PatchError('unhandled transition: %s -> %s' %
                                    (state, newstate))
         state = newstate
     return p.finished()
 
 def filterpatch(ui, chunks):
     """Interactively filter patch chunks into applied-only chunks"""
     chunks = list(chunks)
     chunks.reverse()
     seen = set()
     def consumefile():
         """fetch next portion from chunks until a 'header' is seen
         NB: header == new-file mark
         """
         consumed = []
         while chunks:
             if isinstance(chunks[-1], header):
                 break
             else:
                 consumed.append(chunks.pop())
         return consumed
 
     resp_all = [None]   # this two are changed from inside prompt,
     resp_file = [None]  # so can't be usual variables
     applied = {}        # 'filename' -> [] of chunks
     def prompt(query):
         """prompt query, and process base inputs
 
         - y/n for the rest of file
         - y/n for the rest
         - ? (help)
         - q (quit)
 
         else, input is returned to the caller.
         """
         if resp_all[0] is not None:
             return resp_all[0]
         if resp_file[0] is not None:
             return resp_file[0]
         while True:
             resps = _('[Ynsfdaq?]')
             choices = (_('&Yes, record this change'),
                     _('&No, skip this change'),
                     _('&Skip remaining changes to this file'),
                     _('Record remaining changes to this &file'),
                     _('&Done, skip remaining changes and files'),
                     _('Record &all changes to all remaining files'),
                     _('&Quit, recording no changes'),
                     _('&?'))
             r = (ui.prompt("%s %s " % (query, resps), choices)
                  or _('y')).lower()
             if r == _('?'):
                 doc = gettext(record.__doc__)
                 c = doc.find(_('y - record this change'))
                 for l in doc[c:].splitlines():
                     if l: ui.write(l.strip(), '\n')
                 continue
             elif r == _('s'):
                 r = resp_file[0] = 'n'
             elif r == _('f'):
                 r = resp_file[0] = 'y'
             elif r == _('d'):
                 r = resp_all[0] = 'n'
             elif r == _('a'):
                 r = resp_all[0] = 'y'
             elif r == _('q'):
                 raise util.Abort(_('user quit'))
             return r
     pos, total = 0, len(chunks) - 1
     while chunks:
         chunk = chunks.pop()
         if isinstance(chunk, header):
             # new-file mark
             resp_file = [None]
             fixoffset = 0
             hdr = ''.join(chunk.header)
             if hdr in seen:
                 consumefile()
                 continue
             seen.add(hdr)
             if resp_all[0] is None:
                 chunk.pretty(ui)
             r = prompt(_('examine changes to %s?') %
                        _(' and ').join(map(repr, chunk.files())))
             if r == _('y'):
                 applied[chunk.filename()] = [chunk]
                 if chunk.allhunks():
                     applied[chunk.filename()] += consumefile()
             else:
                 consumefile()
         else:
             # new hunk
             if resp_file[0] is None and resp_all[0] is None:
                 chunk.pretty(ui)
             r = total == 1 and prompt(_('record this change to %r?') %
                                       chunk.filename()) \
                            or  prompt(_('record change %d/%d to %r?') %
                                       (pos, total, chunk.filename()))
             if r == _('y'):
                 if fixoffset:
                     chunk = copy.copy(chunk)
                     chunk.toline += fixoffset
                 applied[chunk.filename()].append(chunk)
             else:
                 fixoffset += chunk.removed - chunk.added
         pos = pos + 1
     return reduce(operator.add, [h for h in applied.itervalues()
                                  if h[0].special() or len(h) > 1], [])
 
 def record(ui, repo, *pats, **opts):
     '''interactively select changes to commit
 
     If a list of files is omitted, all changes reported by "hg status"
     will be candidates for recording.
 
     See 'hg help dates' for a list of formats valid for -d/--date.
 
     You will be prompted for whether to record changes to each
     modified file, and for files with multiple changes, for each
     change to use. For each query, the following responses are
     possible:
 
     y - record this change
     n - skip this change
 
     s - skip remaining changes to this file
     f - record remaining changes to this file
 
     d - done, skip remaining changes and files
     a - record all changes to all remaining files
     q - quit, recording no changes
 
     ? - display help'''
 
     def record_committer(ui, repo, pats, opts):
         commands.commit(ui, repo, *pats, **opts)
 
     dorecord(ui, repo, record_committer, *pats, **opts)
 
 
 def qrecord(ui, repo, patch, *pats, **opts):
     '''interactively record a new patch
 
     See 'hg help qnew' & 'hg help record' for more information and
     usage.
     '''
 
     try:
         mq = extensions.find('mq')
     except KeyError:
         raise util.Abort(_("'mq' extension not loaded"))
 
     def qrecord_committer(ui, repo, pats, opts):
         mq.new(ui, repo, patch, *pats, **opts)
 
     opts = opts.copy()
     opts['force'] = True    # always 'qnew -f'
     dorecord(ui, repo, qrecord_committer, *pats, **opts)
 
 
 def dorecord(ui, repo, committer, *pats, **opts):
     if not ui.interactive():
         raise util.Abort(_('running non-interactively, use commit instead'))
 
     def recordfunc(ui, repo, message, match, opts):
         """This is generic record driver.
 
         It's job is to interactively filter local changes, and accordingly
         prepare working dir into a state, where the job can be delegated to
         non-interactive commit command such as 'commit' or 'qrefresh'.
 
         After the actual job is done by non-interactive command, working dir
         state is restored to original.
 
         In the end we'll record intresting changes, and everything else will be
         left in place, so the user can continue his work.
         """
 
         changes = repo.status(match=match)[:3]
         diffopts = mdiff.diffopts(git=True, nodates=True)
         chunks = patch.diff(repo, changes=changes, opts=diffopts)
         fp = cStringIO.StringIO()
         fp.write(''.join(chunks))
         fp.seek(0)
 
         # 1. filter patch, so we have intending-to apply subset of it
         chunks = filterpatch(ui, parsepatch(fp))
         del fp
 
         contenders = set()
         for h in chunks:
             try: contenders.update(set(h.files()))
             except AttributeError: pass
 
         changed = changes[0] + changes[1] + changes[2]
         newfiles = [f for f in changed if f in contenders]
         if not newfiles:
             ui.status(_('no changes to record\n'))
             return 0
 
         modified = set(changes[0])
 
         # 2. backup changed files, so we can restore them in the end
         backups = {}
         backupdir = repo.join('record-backups')
         try:
             os.mkdir(backupdir)
         except OSError, err:
             if err.errno != errno.EEXIST:
                 raise
         try:
             # backup continues
             for f in newfiles:
                 if f not in modified:
                     continue
                 fd, tmpname = tempfile.mkstemp(prefix=f.replace('/', '_')+'.',
                                                dir=backupdir)
                 os.close(fd)
                 ui.debug(_('backup %r as %r\n') % (f, tmpname))
                 util.copyfile(repo.wjoin(f), tmpname)
                 backups[f] = tmpname
 
             fp = cStringIO.StringIO()
             for c in chunks:
                 if c.filename() in backups:
                     c.write(fp)
             dopatch = fp.tell()
             fp.seek(0)
 
             # 3a. apply filtered patch to clean repo  (clean)
             if backups:
                 hg.revert(repo, repo.dirstate.parents()[0], backups.has_key)
 
             # 3b. (apply)
             if dopatch:
                 try:
                     ui.debug(_('applying patch\n'))
                     ui.debug(fp.getvalue())
                     pfiles = {}
                     patch.internalpatch(fp, ui, 1, repo.root, files=pfiles,
                                         eolmode=None)
                     patch.updatedir(ui, repo, pfiles)
                 except patch.PatchError, err:
                     s = str(err)
                     if s:
                         raise util.Abort(s)
                     else:
                         raise util.Abort(_('patch failed to apply'))
             del fp
 
             # 4. We prepared working directory according to filtered patch.
             #    Now is the time to delegate the job to commit/qrefresh or the like!
 
             # it is important to first chdir to repo root -- we'll call a
             # highlevel command with list of pathnames relative to repo root
             cwd = os.getcwd()
             os.chdir(repo.root)
             try:
                 committer(ui, repo, newfiles, opts)
             finally:
                 os.chdir(cwd)
 
             return 0
         finally:
             # 5. finally restore backed-up files
             try:
                 for realname, tmpname in backups.iteritems():
                     ui.debug(_('restoring %r to %r\n') % (tmpname, realname))
                     util.copyfile(tmpname, repo.wjoin(realname))
                     os.unlink(tmpname)
                 os.rmdir(backupdir)
             except OSError:
                 pass
     return cmdutil.commit(ui, repo, recordfunc, pats, opts)
 
 cmdtable = {
     "record":
         (record,
 
          # add commit options
          commands.table['^commit|ci'][1],
 
          _('hg record [OPTION]... [FILE]...')),
 }
 
 
 def extsetup():
     try:
         mq = extensions.find('mq')
     except KeyError:
         return
 
     qcmdtable = {
     "qrecord":
         (qrecord,
 
          # add qnew options, except '--force'
          [opt for opt in mq.cmdtable['qnew'][1] if opt[1] != 'force'],
 
          _('hg qrecord [OPTION]... PATCH [FILE]...')),
     }
 
     cmdtable.update(qcmdtable)
 

hgext/share.py

@@ -1,31 +1,31 b''
 # Copyright 2006, 2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''provides the hg share command'''
+'''share a common history between several working directories'''
 
 import os
 from mercurial.i18n import _
 from mercurial import hg, commands
 
 def share(ui, source, dest=None, noupdate=False):
     """create a new shared repository (experimental)
 
     Initialize a new repository and working directory that shares its
     history with another repository.
 
     NOTE: actions that change history such as rollback or moving the
     source may confuse sharers.
     """
 
     return hg.share(ui, source, dest, not noupdate)
 
 cmdtable = {
     "share":
     (share,
      [('U', 'noupdate', None, _('do not create a working copy'))],
      _('[-U] SOURCE [DEST]')),
 }
 
 commands.norepo += " share"

hgext/transplant.py

@@ -1,605 +1,605 b''
 # Patch transplanting extension for Mercurial
 #
 # Copyright 2006, 2007 Brendan Cully <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''patch transplanting tool
+'''transplant changesets from another branch
 
 This extension allows you to transplant patches from another branch.
 
 Transplanted patches are recorded in .hg/transplant/transplants, as a
 map from a changeset hash to its hash in the source repository.
 '''
 
 from mercurial.i18n import _
 import os, tempfile
 from mercurial import bundlerepo, changegroup, cmdutil, hg, merge, match
 from mercurial import patch, revlog, util, error
 
 class transplantentry(object):
     def __init__(self, lnode, rnode):
         self.lnode = lnode
         self.rnode = rnode
 
 class transplants(object):
     def __init__(self, path=None, transplantfile=None, opener=None):
         self.path = path
         self.transplantfile = transplantfile
         self.opener = opener
 
         if not opener:
             self.opener = util.opener(self.path)
         self.transplants = []
         self.dirty = False
         self.read()
 
     def read(self):
         abspath = os.path.join(self.path, self.transplantfile)
         if self.transplantfile and os.path.exists(abspath):
             for line in self.opener(self.transplantfile).read().splitlines():
                 lnode, rnode = map(revlog.bin, line.split(':'))
                 self.transplants.append(transplantentry(lnode, rnode))
 
     def write(self):
         if self.dirty and self.transplantfile:
             if not os.path.isdir(self.path):
                 os.mkdir(self.path)
             fp = self.opener(self.transplantfile, 'w')
             for c in self.transplants:
                 l, r = map(revlog.hex, (c.lnode, c.rnode))
                 fp.write(l + ':' + r + '\n')
             fp.close()
         self.dirty = False
 
     def get(self, rnode):
         return [t for t in self.transplants if t.rnode == rnode]
 
     def set(self, lnode, rnode):
         self.transplants.append(transplantentry(lnode, rnode))
         self.dirty = True
 
     def remove(self, transplant):
         del self.transplants[self.transplants.index(transplant)]
         self.dirty = True
 
 class transplanter(object):
     def __init__(self, ui, repo):
         self.ui = ui
         self.path = repo.join('transplant')
         self.opener = util.opener(self.path)
         self.transplants = transplants(self.path, 'transplants',
                                        opener=self.opener)
 
     def applied(self, repo, node, parent):
         '''returns True if a node is already an ancestor of parent
         or has already been transplanted'''
         if hasnode(repo, node):
             if node in repo.changelog.reachable(parent, stop=node):
                 return True
         for t in self.transplants.get(node):
             # it might have been stripped
             if not hasnode(repo, t.lnode):
                 self.transplants.remove(t)
                 return False
             if t.lnode in repo.changelog.reachable(parent, stop=t.lnode):
                 return True
         return False
 
     def apply(self, repo, source, revmap, merges, opts={}):
         '''apply the revisions in revmap one by one in revision order'''
         revs = sorted(revmap)
         p1, p2 = repo.dirstate.parents()
         pulls = []
         diffopts = patch.diffopts(self.ui, opts)
         diffopts.git = True
 
         lock = wlock = None
         try:
             wlock = repo.wlock()
             lock = repo.lock()
             for rev in revs:
                 node = revmap[rev]
                 revstr = '%s:%s' % (rev, revlog.short(node))
 
                 if self.applied(repo, node, p1):
                     self.ui.warn(_('skipping already applied revision %s\n') %
                                  revstr)
                     continue
 
                 parents = source.changelog.parents(node)
                 if not opts.get('filter'):
                     # If the changeset parent is the same as the
                     # wdir's parent, just pull it.
                     if parents[0] == p1:
                         pulls.append(node)
                         p1 = node
                         continue
                     if pulls:
                         if source != repo:
                             repo.pull(source, heads=pulls)
                         merge.update(repo, pulls[-1], False, False, None)
                         p1, p2 = repo.dirstate.parents()
                         pulls = []
 
                 domerge = False
                 if node in merges:
                     # pulling all the merge revs at once would mean we
                     # couldn't transplant after the latest even if
                     # transplants before them fail.
                     domerge = True
                     if not hasnode(repo, node):
                         repo.pull(source, heads=[node])
 
                 if parents[1] != revlog.nullid:
                     self.ui.note(_('skipping merge changeset %s:%s\n')
                                  % (rev, revlog.short(node)))
                     patchfile = None
                 else:
                     fd, patchfile = tempfile.mkstemp(prefix='hg-transplant-')
                     fp = os.fdopen(fd, 'w')
                     gen = patch.diff(source, parents[0], node, opts=diffopts)
                     for chunk in gen:
                         fp.write(chunk)
                     fp.close()
 
                 del revmap[rev]
                 if patchfile or domerge:
                     try:
                         n = self.applyone(repo, node,
                                           source.changelog.read(node),
                                           patchfile, merge=domerge,
                                           log=opts.get('log'),
                                           filter=opts.get('filter'))
                         if n and domerge:
                             self.ui.status(_('%s merged at %s\n') % (revstr,
                                       revlog.short(n)))
                         elif n:
                             self.ui.status(_('%s transplanted to %s\n')
                                            % (revlog.short(node),
                                               revlog.short(n)))
                     finally:
                         if patchfile:
                             os.unlink(patchfile)
             if pulls:
                 repo.pull(source, heads=pulls)
                 merge.update(repo, pulls[-1], False, False, None)
         finally:
             self.saveseries(revmap, merges)
             self.transplants.write()
             lock.release()
             wlock.release()
 
     def filter(self, filter, changelog, patchfile):
         '''arbitrarily rewrite changeset before applying it'''
 
         self.ui.status(_('filtering %s\n') % patchfile)
         user, date, msg = (changelog[1], changelog[2], changelog[4])
 
         fd, headerfile = tempfile.mkstemp(prefix='hg-transplant-')
         fp = os.fdopen(fd, 'w')
         fp.write("# HG changeset patch\n")
         fp.write("# User %s\n" % user)
         fp.write("# Date %d %d\n" % date)
         fp.write(changelog[4])
         fp.close()
 
         try:
             util.system('%s %s %s' % (filter, util.shellquote(headerfile),
                                    util.shellquote(patchfile)),
                         environ={'HGUSER': changelog[1]},
                         onerr=util.Abort, errprefix=_('filter failed'))
             user, date, msg = self.parselog(file(headerfile))[1:4]
         finally:
             os.unlink(headerfile)
 
         return (user, date, msg)
 
     def applyone(self, repo, node, cl, patchfile, merge=False, log=False,
                  filter=None):
         '''apply the patch in patchfile to the repository as a transplant'''
         (manifest, user, (time, timezone), files, message) = cl[:5]
         date = "%d %d" % (time, timezone)
         extra = {'transplant_source': node}
         if filter:
             (user, date, message) = self.filter(filter, cl, patchfile)
 
         if log:
             message += '\n(transplanted from %s)' % revlog.hex(node)
 
         self.ui.status(_('applying %s\n') % revlog.short(node))
         self.ui.note('%s %s\n%s\n' % (user, date, message))
 
         if not patchfile and not merge:
             raise util.Abort(_('can only omit patchfile if merging'))
         if patchfile:
             try:
                 files = {}
                 try:
                     patch.patch(patchfile, self.ui, cwd=repo.root,
                                 files=files, eolmode=None)
                     if not files:
                         self.ui.warn(_('%s: empty changeset')
                                      % revlog.hex(node))
                         return None
                 finally:
                     files = patch.updatedir(self.ui, repo, files)
             except Exception, inst:
                 if filter:
                     os.unlink(patchfile)
                 seriespath = os.path.join(self.path, 'series')
                 if os.path.exists(seriespath):
                     os.unlink(seriespath)
                 p1 = repo.dirstate.parents()[0]
                 p2 = node
                 self.log(user, date, message, p1, p2, merge=merge)
                 self.ui.write(str(inst) + '\n')
                 raise util.Abort(_('Fix up the merge and run '
                                    'hg transplant --continue'))
         else:
             files = None
         if merge:
             p1, p2 = repo.dirstate.parents()
             repo.dirstate.setparents(p1, node)
             m = match.always(repo.root, '')
         else:
             m = match.exact(repo.root, '', files)
 
         n = repo.commit(message, user, date, extra=extra, match=m)
         if not merge:
             self.transplants.set(n, node)
 
         return n
 
     def resume(self, repo, source, opts=None):
         '''recover last transaction and apply remaining changesets'''
         if os.path.exists(os.path.join(self.path, 'journal')):
             n, node = self.recover(repo)
             self.ui.status(_('%s transplanted as %s\n') % (revlog.short(node),
                                                            revlog.short(n)))
         seriespath = os.path.join(self.path, 'series')
         if not os.path.exists(seriespath):
             self.transplants.write()
             return
         nodes, merges = self.readseries()
         revmap = {}
         for n in nodes:
             revmap[source.changelog.rev(n)] = n
         os.unlink(seriespath)
 
         self.apply(repo, source, revmap, merges, opts)
 
     def recover(self, repo):
         '''commit working directory using journal metadata'''
         node, user, date, message, parents = self.readlog()
         merge = len(parents) == 2
 
         if not user or not date or not message or not parents[0]:
             raise util.Abort(_('transplant log file is corrupt'))
 
         extra = {'transplant_source': node}
         wlock = repo.wlock()
         try:
             p1, p2 = repo.dirstate.parents()
             if p1 != parents[0]:
                 raise util.Abort(
                     _('working dir not at transplant parent %s') %
                                  revlog.hex(parents[0]))
             if merge:
                 repo.dirstate.setparents(p1, parents[1])
             n = repo.commit(message, user, date, extra=extra)
             if not n:
                 raise util.Abort(_('commit failed'))
             if not merge:
                 self.transplants.set(n, node)
             self.unlog()
 
             return n, node
         finally:
             wlock.release()
 
     def readseries(self):
         nodes = []
         merges = []
         cur = nodes
         for line in self.opener('series').read().splitlines():
             if line.startswith('# Merges'):
                 cur = merges
                 continue
             cur.append(revlog.bin(line))
 
         return (nodes, merges)
 
     def saveseries(self, revmap, merges):
         if not revmap:
             return
 
         if not os.path.isdir(self.path):
             os.mkdir(self.path)
         series = self.opener('series', 'w')
         for rev in sorted(revmap):
             series.write(revlog.hex(revmap[rev]) + '\n')
         if merges:
             series.write('# Merges\n')
             for m in merges:
                 series.write(revlog.hex(m) + '\n')
         series.close()
 
     def parselog(self, fp):
         parents = []
         message = []
         node = revlog.nullid
         inmsg = False
         for line in fp.read().splitlines():
             if inmsg:
                 message.append(line)
             elif line.startswith('# User '):
                 user = line[7:]
             elif line.startswith('# Date '):
                 date = line[7:]
             elif line.startswith('# Node ID '):
                 node = revlog.bin(line[10:])
             elif line.startswith('# Parent '):
                 parents.append(revlog.bin(line[9:]))
             elif not line.startswith('#'):
                 inmsg = True
                 message.append(line)
         return (node, user, date, '\n'.join(message), parents)
 
     def log(self, user, date, message, p1, p2, merge=False):
         '''journal changelog metadata for later recover'''
 
         if not os.path.isdir(self.path):
             os.mkdir(self.path)
         fp = self.opener('journal', 'w')
         fp.write('# User %s\n' % user)
         fp.write('# Date %s\n' % date)
         fp.write('# Node ID %s\n' % revlog.hex(p2))
         fp.write('# Parent ' + revlog.hex(p1) + '\n')
         if merge:
             fp.write('# Parent ' + revlog.hex(p2) + '\n')
         fp.write(message.rstrip() + '\n')
         fp.close()
 
     def readlog(self):
         return self.parselog(self.opener('journal'))
 
     def unlog(self):
         '''remove changelog journal'''
         absdst = os.path.join(self.path, 'journal')
         if os.path.exists(absdst):
             os.unlink(absdst)
 
     def transplantfilter(self, repo, source, root):
         def matchfn(node):
             if self.applied(repo, node, root):
                 return False
             if source.changelog.parents(node)[1] != revlog.nullid:
                 return False
             extra = source.changelog.read(node)[5]
             cnode = extra.get('transplant_source')
             if cnode and self.applied(repo, cnode, root):
                 return False
             return True
 
         return matchfn
 
 def hasnode(repo, node):
     try:
         return repo.changelog.rev(node) != None
     except error.RevlogError:
         return False
 
 def browserevs(ui, repo, nodes, opts):
     '''interactively transplant changesets'''
     def browsehelp(ui):
         ui.write('y: transplant this changeset\n'
                  'n: skip this changeset\n'
                  'm: merge at this changeset\n'
                  'p: show patch\n'
                  'c: commit selected changesets\n'
                  'q: cancel transplant\n'
                  '?: show this help\n')
 
     displayer = cmdutil.show_changeset(ui, repo, opts)
     transplants = []
     merges = []
     for node in nodes:
         displayer.show(repo[node])
         action = None
         while not action:
             action = ui.prompt(_('apply changeset? [ynmpcq?]:'))
             if action == '?':
                 browsehelp(ui)
                 action = None
             elif action == 'p':
                 parent = repo.changelog.parents(node)[0]
                 for chunk in patch.diff(repo, parent, node):
                     ui.write(chunk)
                 action = None
             elif action not in ('y', 'n', 'm', 'c', 'q'):
                 ui.write('no such option\n')
                 action = None
         if action == 'y':
             transplants.append(node)
         elif action == 'm':
             merges.append(node)
         elif action == 'c':
             break
         elif action == 'q':
             transplants = ()
             merges = ()
             break
     return (transplants, merges)
 
 def transplant(ui, repo, *revs, **opts):
     '''transplant changesets from another branch
 
     Selected changesets will be applied on top of the current working
     directory with the log of the original changeset. If --log is
     specified, log messages will have a comment appended of the form:
 
     (transplanted from CHANGESETHASH)
 
     You can rewrite the changelog message with the --filter option.
     Its argument will be invoked with the current changelog message as
     $1 and the patch as $2.
 
     If --source/-s is specified, selects changesets from the named
     repository. If --branch/-b is specified, selects changesets from
     the branch holding the named revision, up to that revision. If
     --all/-a is specified, all changesets on the branch will be
     transplanted, otherwise you will be prompted to select the
     changesets you want.
 
     hg transplant --branch REVISION --all will rebase the selected
     branch (up to the named revision) onto your current working
     directory.
 
     You can optionally mark selected transplanted changesets as merge
     changesets. You will not be prompted to transplant any ancestors
     of a merged transplant, and you can merge descendants of them
     normally instead of transplanting them.
 
     If no merges or revisions are provided, hg transplant will start
     an interactive changeset browser.
 
     If a changeset application fails, you can fix the merge by hand
     and then resume where you left off by calling hg transplant
     --continue/-c.
     '''
     def getremotechanges(repo, url):
         sourcerepo = ui.expandpath(url)
         source = hg.repository(ui, sourcerepo)
         common, incoming, rheads = repo.findcommonincoming(source, force=True)
         if not incoming:
             return (source, None, None)
 
         bundle = None
         if not source.local():
             if source.capable('changegroupsubset'):
                 cg = source.changegroupsubset(incoming, rheads, 'incoming')
             else:
                 cg = source.changegroup(incoming, 'incoming')
             bundle = changegroup.writebundle(cg, None, 'HG10UN')
             source = bundlerepo.bundlerepository(ui, repo.root, bundle)
 
         return (source, incoming, bundle)
 
     def incwalk(repo, incoming, branches, match=util.always):
         if not branches:
             branches=None
         for node in repo.changelog.nodesbetween(incoming, branches)[0]:
             if match(node):
                 yield node
 
     def transplantwalk(repo, root, branches, match=util.always):
         if not branches:
             branches = repo.heads()
         ancestors = []
         for branch in branches:
             ancestors.append(repo.changelog.ancestor(root, branch))
         for node in repo.changelog.nodesbetween(ancestors, branches)[0]:
             if match(node):
                 yield node
 
     def checkopts(opts, revs):
         if opts.get('continue'):
             if filter(lambda opt: opts.get(opt), ('branch', 'all', 'merge')):
                 raise util.Abort(_('--continue is incompatible with '
                                    'branch, all or merge'))
             return
         if not (opts.get('source') or revs or
                 opts.get('merge') or opts.get('branch')):
             raise util.Abort(_('no source URL, branch tag or revision '
                                'list provided'))
         if opts.get('all'):
             if not opts.get('branch'):
                 raise util.Abort(_('--all requires a branch revision'))
             if revs:
                 raise util.Abort(_('--all is incompatible with a '
                                    'revision list'))
 
     checkopts(opts, revs)
 
     if not opts.get('log'):
         opts['log'] = ui.config('transplant', 'log')
     if not opts.get('filter'):
         opts['filter'] = ui.config('transplant', 'filter')
 
     tp = transplanter(ui, repo)
 
     p1, p2 = repo.dirstate.parents()
     if len(repo) > 0 and p1 == revlog.nullid:
         raise util.Abort(_('no revision checked out'))
     if not opts.get('continue'):
         if p2 != revlog.nullid:
             raise util.Abort(_('outstanding uncommitted merges'))
         m, a, r, d = repo.status()[:4]
         if m or a or r or d:
             raise util.Abort(_('outstanding local changes'))
 
     bundle = None
     source = opts.get('source')
     if source:
         (source, incoming, bundle) = getremotechanges(repo, source)
     else:
         source = repo
 
     try:
         if opts.get('continue'):
             tp.resume(repo, source, opts)
             return
 
         tf=tp.transplantfilter(repo, source, p1)
         if opts.get('prune'):
             prune = [source.lookup(r)
                      for r in cmdutil.revrange(source, opts.get('prune'))]
             matchfn = lambda x: tf(x) and x not in prune
         else:
             matchfn = tf
         branches = map(source.lookup, opts.get('branch', ()))
         merges = map(source.lookup, opts.get('merge', ()))
         revmap = {}
         if revs:
             for r in cmdutil.revrange(source, revs):
                 revmap[int(r)] = source.lookup(r)
         elif opts.get('all') or not merges:
             if source != repo:
                 alltransplants = incwalk(source, incoming, branches,
                                          match=matchfn)
             else:
                 alltransplants = transplantwalk(source, p1, branches,
                                                 match=matchfn)
             if opts.get('all'):
                 revs = alltransplants
             else:
                 revs, newmerges = browserevs(ui, source, alltransplants, opts)
                 merges.extend(newmerges)
             for r in revs:
                 revmap[source.changelog.rev(r)] = r
         for r in merges:
             revmap[source.changelog.rev(r)] = r
 
         tp.apply(repo, source, revmap, merges, opts)
     finally:
         if bundle:
             source.close()
             os.unlink(bundle)
 
 cmdtable = {
     "transplant":
         (transplant,
          [('s', 'source', '', _('pull patches from REPOSITORY')),
           ('b', 'branch', [], _('pull patches from branch BRANCH')),
           ('a', 'all', None, _('pull all changesets up to BRANCH')),
           ('p', 'prune', [], _('skip over REV')),
           ('m', 'merge', [], _('merge at REV')),
           ('', 'log', None, _('append transplant info to log message')),
           ('c', 'continue', None, _('continue last transplant session '
                                     'after repair')),
           ('', 'filter', '', _('filter changesets through FILTER'))],
          _('hg transplant [-s REPOSITORY] [-b BRANCH [-a]] [-p REV] '
            '[-m REV] [REV]...'))
 }

hgext/win32mbcs.py

@@ -1,121 +1,120 b''
 # win32mbcs.py -- MBCS filename support for Mercurial
 #
 # Copyright (c) 2008 Shun-ichi Goto <[e-mail]>
 #
 # Version: 0.2
 # Author:  Shun-ichi Goto <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 #
 
-"""allow to use MBCS path with problematic encoding.
+'''allow the use of MBCS paths with problematic encoding
 
 Some MBCS encodings are not good for some path operations (i.e.
 splitting path, case conversion, etc.) with its encoded bytes. We call
 such a encoding (i.e. shift_jis and big5) as "problematic encoding".
 This extension can be used to fix the issue with those encodings by
 wrapping some functions to convert to Unicode string before path
 operation.
 
 This extension is useful for:
  * Japanese Windows users using shift_jis encoding.
  * Chinese Windows users using big5 encoding.
  * All users who use a repository with one of problematic encodings on
    case-insensitive file system.
 
 This extension is not needed for:
  * Any user who use only ASCII chars in path.
  * Any user who do not use any of problematic encodings.
 
 Note that there are some limitations on using this extension:
  * You should use single encoding in one repository.
  * You should set same encoding for the repository by locale or
    HGENCODING.
 
 Path encoding conversion are done between Unicode and
 encoding.encoding which is decided by Mercurial from current locale
 setting or HGENCODING.
-
-"""
+'''
 
 import os
 from mercurial.i18n import _
 from mercurial import util, encoding
 
 def decode(arg):
     if isinstance(arg, str):
         uarg = arg.decode(encoding.encoding)
         if arg == uarg.encode(encoding.encoding):
             return uarg
         raise UnicodeError("Not local encoding")
     elif isinstance(arg, tuple):
         return tuple(map(decode, arg))
     elif isinstance(arg, list):
         return map(decode, arg)
     return arg
 
 def encode(arg):
     if isinstance(arg, unicode):
         return arg.encode(encoding.encoding)
     elif isinstance(arg, tuple):
         return tuple(map(encode, arg))
     elif isinstance(arg, list):
         return map(encode, arg)
     return arg
 
 def wrapper(func, args):
     # check argument is unicode, then call original
     for arg in args:
         if isinstance(arg, unicode):
             return func(*args)
 
     try:
         # convert arguments to unicode, call func, then convert back
         return encode(func(*decode(args)))
     except UnicodeError:
         # If not encoded with encoding.encoding, report it then
         # continue with calling original function.
         raise util.Abort(_("[win32mbcs] filename conversion fail with"
                          " %s encoding\n") % (encoding.encoding))
 
 def wrapname(name):
     idx = name.rfind('.')
     module = name[:idx]
     name = name[idx+1:]
     module = globals()[module]
     func = getattr(module, name)
     def f(*args):
         return wrapper(func, args)
     try:
         f.__name__ = func.__name__                # fail with python23
     except Exception:
         pass
     setattr(module, name, f)
 
 # List of functions to be wrapped.
 # NOTE: os.path.dirname() and os.path.basename() are safe because
 #       they use result of os.path.split()
 funcs = '''os.path.join os.path.split os.path.splitext
  os.path.splitunc os.path.normpath os.path.normcase os.makedirs
  util.endswithsep util.splitpath util.checkcase util.fspath'''
 
 # codec and alias names of sjis and big5 to be faked.
 problematic_encodings = '''big5 big5-tw csbig5 big5hkscs big5-hkscs
  hkscs cp932 932 ms932 mskanji ms-kanji shift_jis csshiftjis shiftjis
  sjis s_jis shift_jis_2004 shiftjis2004 sjis_2004 sjis2004
  shift_jisx0213 shiftjisx0213 sjisx0213 s_jisx0213 950 cp950 ms950 '''
 
 def reposetup(ui, repo):
     # TODO: decide use of config section for this extension
     if not os.path.supports_unicode_filenames:
         ui.warn(_("[win32mbcs] cannot activate on this platform.\n"))
         return
 
     # fake is only for relevant environment.
     if encoding.encoding.lower() in problematic_encodings.split():
         for f in funcs.split():
             wrapname(f)
         ui.debug(_("[win32mbcs] activated with encoding: %s\n")
                  % encoding.encoding)
 

hgext/win32text.py

@@ -1,158 +1,158 b''
 # win32text.py - LF <-> CRLF/CR translation utilities for Windows/Mac users
 #
 #  Copyright 2005, 2007-2009 Matt Mackall <[e-mail]> and others
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''LF <-> CRLF/CR translation utilities
+'''perform automatic newline conversion
 
 To perform automatic newline conversion, use:
 
 [extensions]
 hgext.win32text =
 [encode]
 ** = cleverencode:
 # or ** = macencode:
 
 [decode]
 ** = cleverdecode:
 # or ** = macdecode:
 
 If not doing conversion, to make sure you do not commit CRLF/CR by accident:
 
 [hooks]
 pretxncommit.crlf = python:hgext.win32text.forbidcrlf
 # or pretxncommit.cr = python:hgext.win32text.forbidcr
 
 To do the same check on a server to prevent CRLF/CR from being
 pushed or pulled:
 
 [hooks]
 pretxnchangegroup.crlf = python:hgext.win32text.forbidcrlf
 # or pretxnchangegroup.cr = python:hgext.win32text.forbidcr
 '''
 
 from mercurial.i18n import _
 from mercurial.node import short
 from mercurial import util
 import re
 
 # regexp for single LF without CR preceding.
 re_single_lf = re.compile('(^|[^\r])\n', re.MULTILINE)
 
 newlinestr = {'\r\n': 'CRLF', '\r': 'CR'}
 filterstr = {'\r\n': 'clever', '\r': 'mac'}
 
 def checknewline(s, newline, ui=None, repo=None, filename=None):
     # warn if already has 'newline' in repository.
     # it might cause unexpected eol conversion.
     # see issue 302:
     #   http://www.selenic.com/mercurial/bts/issue302
     if newline in s and ui and filename and repo:
         ui.warn(_('WARNING: %s already has %s line endings\n'
                   'and does not need EOL conversion by the win32text plugin.\n'
                   'Before your next commit, please reconsider your '
                   'encode/decode settings in \nMercurial.ini or %s.\n') %
                 (filename, newlinestr[newline], repo.join('hgrc')))
 
 def dumbdecode(s, cmd, **kwargs):
     checknewline(s, '\r\n', **kwargs)
     # replace single LF to CRLF
     return re_single_lf.sub('\\1\r\n', s)
 
 def dumbencode(s, cmd):
     return s.replace('\r\n', '\n')
 
 def macdumbdecode(s, cmd, **kwargs):
     checknewline(s, '\r', **kwargs)
     return s.replace('\n', '\r')
 
 def macdumbencode(s, cmd):
     return s.replace('\r', '\n')
 
 def cleverdecode(s, cmd, **kwargs):
     if not util.binary(s):
         return dumbdecode(s, cmd, **kwargs)
     return s
 
 def cleverencode(s, cmd):
     if not util.binary(s):
         return dumbencode(s, cmd)
     return s
 
 def macdecode(s, cmd, **kwargs):
     if not util.binary(s):
         return macdumbdecode(s, cmd, **kwargs)
     return s
 
 def macencode(s, cmd):
     if not util.binary(s):
         return macdumbencode(s, cmd)
     return s
 
 _filters = {
     'dumbdecode:': dumbdecode,
     'dumbencode:': dumbencode,
     'cleverdecode:': cleverdecode,
     'cleverencode:': cleverencode,
     'macdumbdecode:': macdumbdecode,
     'macdumbencode:': macdumbencode,
     'macdecode:': macdecode,
     'macencode:': macencode,
     }
 
 def forbidnewline(ui, repo, hooktype, node, newline, **kwargs):
     halt = False
     seen = set()
     # we try to walk changesets in reverse order from newest to
     # oldest, so that if we see a file multiple times, we take the
     # newest version as canonical. this prevents us from blocking a
     # changegroup that contains an unacceptable commit followed later
     # by a commit that fixes the problem.
     tip = repo['tip']
     for rev in xrange(len(repo)-1, repo[node].rev()-1, -1):
         c = repo[rev]
         for f in c.files():
             if f in seen or f not in tip or f not in c:
                 continue
             seen.add(f)
             data = c[f].data()
             if not util.binary(data) and newline in data:
                 if not halt:
                     ui.warn(_('Attempt to commit or push text file(s) '
                               'using %s line endings\n') %
                               newlinestr[newline])
                 ui.warn(_('in %s: %s\n') % (short(c.node()), f))
                 halt = True
     if halt and hooktype == 'pretxnchangegroup':
         crlf = newlinestr[newline].lower()
         filter = filterstr[newline]
         ui.warn(_('\nTo prevent this mistake in your local repository,\n'
                   'add to Mercurial.ini or .hg/hgrc:\n'
                   '\n'
                   '[hooks]\n'
                   'pretxncommit.%s = python:hgext.win32text.forbid%s\n'
                   '\n'
                   'and also consider adding:\n'
                   '\n'
                   '[extensions]\n'
                   'hgext.win32text =\n'
                   '[encode]\n'
                   '** = %sencode:\n'
                   '[decode]\n'
                   '** = %sdecode:\n') % (crlf, crlf, filter, filter))
     return halt
 
 def forbidcrlf(ui, repo, hooktype, node, **kwargs):
     return forbidnewline(ui, repo, hooktype, node, '\r\n', **kwargs)
 
 def forbidcr(ui, repo, hooktype, node, **kwargs):
     return forbidnewline(ui, repo, hooktype, node, '\r', **kwargs)
 
 def reposetup(ui, repo):
     if not repo.local():
         return
     for name, fn in _filters.iteritems():
         repo.adddatafilter(name, fn)
 

hgext/zeroconf/__init__.py

@@ -1,159 +1,159 b''
 # zeroconf.py - zeroconf support for Mercurial
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-'''zeroconf support for Mercurial repositories
+'''discover and advertise repositories on the local network
 
 Zeroconf enabled repositories will be announced in a network without
 the need to configure a server or a service. They can be discovered
 without knowing their actual IP address.
 
 To allow other people to discover your repository using run "hg serve"
 in your repository.
 
  $ cd test
  $ hg serve
 
 You can discover zeroconf enabled repositories by running "hg paths".
 
  $ hg paths
  zc-test = http://example.com:8000/test
 '''
 
 import Zeroconf, socket, time, os
 from mercurial import ui
 from mercurial import extensions
 from mercurial.hgweb import hgweb_mod
 from mercurial.hgweb import hgwebdir_mod
 
 # publish
 
 server = None
 localip = None
 
 def getip():
     # finds external-facing interface without sending any packets (Linux)
     try:
         s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
         s.connect(('1.0.0.1', 0))
         ip = s.getsockname()[0]
         return ip
     except:
         pass
 
     # Generic method, sometimes gives useless results
     try:
         dumbip = socket.gethostbyaddr(socket.gethostname())[2][0]
         if not dumbip.startswith('127.') and ':' not in dumbip:
             return dumbip
     except socket.gaierror:
         dumbip = '127.0.0.1'
 
     # works elsewhere, but actually sends a packet
     try:
         s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
         s.connect(('1.0.0.1', 1))
         ip = s.getsockname()[0]
         return ip
     except:
         pass
 
     return dumbip
 
 def publish(name, desc, path, port):
     global server, localip
     if not server:
         ip = getip()
         if ip.startswith('127.'):
             # if we have no internet connection, this can happen.
             return
         localip = socket.inet_aton(ip)
         server = Zeroconf.Zeroconf(ip)
 
     hostname = socket.gethostname().split('.')[0]
     host = hostname + ".local"
     name = "%s-%s" % (hostname, name)
 
     # advertise to browsers
     svc = Zeroconf.ServiceInfo('_http._tcp.local.',
                                name + '._http._tcp.local.',
                                server = host,
                                port = port,
                                properties = {'description': desc,
                                              'path': "/" + path},
                                address = localip, weight = 0, priority = 0)
     server.registerService(svc)
 
     # advertise to Mercurial clients
     svc = Zeroconf.ServiceInfo('_hg._tcp.local.',
                                name + '._hg._tcp.local.',
                                server = host,
                                port = port,
                                properties = {'description': desc,
                                              'path': "/" + path},
                                address = localip, weight = 0, priority = 0)
     server.registerService(svc)
 
 class hgwebzc(hgweb_mod.hgweb):
     def __init__(self, repo, name=None):
         super(hgwebzc, self).__init__(repo, name)
         name = self.reponame or os.path.basename(repo.root)
         desc = self.repo.ui.config("web", "description", name)
         publish(name, desc, name, int(repo.ui.config("web", "port", 8000)))
 
 class hgwebdirzc(hgwebdir_mod.hgwebdir):
     def run(self):
         for r, p in self.repos:
             u = self.ui.copy()
             u.readconfig(os.path.join(p, '.hg', 'hgrc'))
             n = os.path.basename(r)
             publish(n, "hgweb", p, int(u.config("web", "port", 8000)))
         return super(hgwebdirzc, self).run()
 
 # listen
 
 class listener(object):
     def __init__(self):
         self.found = {}
     def removeService(self, server, type, name):
         if repr(name) in self.found:
             del self.found[repr(name)]
     def addService(self, server, type, name):
         self.found[repr(name)] = server.getServiceInfo(type, name)
 
 def getzcpaths():
     ip = getip()
     if ip.startswith('127.'):
         return
     server = Zeroconf.Zeroconf(ip)
     l = listener()
     Zeroconf.ServiceBrowser(server, "_hg._tcp.local.", l)
     time.sleep(1)
     server.close()
     for v in l.found.values():
         n = v.name[:v.name.index('.')]
         n.replace(" ", "-")
         u = "http://%s:%s%s" % (socket.inet_ntoa(v.address), v.port,
                                  v.properties.get("path", "/"))
         yield "zc-" + n, u
 
 def config(orig, self, section, key, default=None, untrusted=False):
     if section == "paths" and key.startswith("zc-"):
         for n, p in getzcpaths():
             if n == key:
                 return p
     return orig(self, section, key, default, untrusted)
 
 def configitems(orig, self, section, untrusted=False):
     r = orig(self, section, untrusted)
     if section == "paths":
         r += getzcpaths()
     return r
 
 extensions.wrapfunction(ui.ui, 'config', config)
 extensions.wrapfunction(ui.ui, 'configitems', configitems)
 hgweb_mod.hgweb = hgwebzc
 hgwebdir_mod.hgwebdir = hgwebdirzc

mercurial/extensions.py

@@ -1,177 +1,177 b''
 # extensions.py - extension handling for mercurial
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
-import imp, os, sys
+import imp, os
 import util, cmdutil, help
 from i18n import _, gettext
 
 _extensions = {}
 _order = []
 
 def extensions():
     for name in _order:
         module = _extensions[name]
         if module:
             yield name, module
 
 def find(name):
     '''return module with given extension name'''
     try:
         return _extensions[name]
     except KeyError:
         for k, v in _extensions.iteritems():
             if k.endswith('.' + name) or k.endswith('/' + name):
                 return v
         raise KeyError(name)
 
 def loadpath(path, module_name):
     module_name = module_name.replace('.', '_')
     path = os.path.expanduser(path)
     if os.path.isdir(path):
         # module/__init__.py style
         d, f = os.path.split(path.rstrip('/'))
         fd, fpath, desc = imp.find_module(f, [d])
         return imp.load_module(module_name, fd, fpath, desc)
     else:
         return imp.load_source(module_name, path)
 
 def load(ui, name, path):
     if name.startswith('hgext.') or name.startswith('hgext/'):
         shortname = name[6:]
     else:
         shortname = name
     if shortname in _extensions:
         return
     _extensions[shortname] = None
     if path:
         # the module will be loaded in sys.modules
         # choose an unique name so that it doesn't
         # conflicts with other modules
         mod = loadpath(path, 'hgext.%s' % name)
     else:
         def importh(name):
             mod = __import__(name)
             components = name.split('.')
             for comp in components[1:]:
                 mod = getattr(mod, comp)
             return mod
         try:
             mod = importh("hgext.%s" % name)
         except ImportError:
             mod = importh(name)
     _extensions[shortname] = mod
     _order.append(shortname)
 
     uisetup = getattr(mod, 'uisetup', None)
     if uisetup:
         uisetup(ui)
 
 def loadall(ui):
     result = ui.configitems("extensions")
     for (name, path) in result:
         if path:
             if path[0] == '!':
                 continue
         try:
             load(ui, name, path)
         except KeyboardInterrupt:
             raise
         except Exception, inst:
             if path:
                 ui.warn(_("*** failed to import extension %s from %s: %s\n")
                         % (name, path, inst))
             else:
                 ui.warn(_("*** failed to import extension %s: %s\n")
                         % (name, inst))
             if ui.traceback():
                 return 1
 
 def wrapcommand(table, command, wrapper):
     aliases, entry = cmdutil.findcmd(command, table)
     for alias, e in table.iteritems():
         if e is entry:
             key = alias
             break
 
     origfn = entry[0]
     def wrap(*args, **kwargs):
         return util.checksignature(wrapper)(
             util.checksignature(origfn), *args, **kwargs)
 
     wrap.__doc__ = getattr(origfn, '__doc__')
     wrap.__module__ = getattr(origfn, '__module__')
 
     newentry = list(entry)
     newentry[0] = wrap
     table[key] = tuple(newentry)
     return entry
 
 def wrapfunction(container, funcname, wrapper):
     def wrap(*args, **kwargs):
         return wrapper(origfn, *args, **kwargs)
 
     origfn = getattr(container, funcname)
     setattr(container, funcname, wrap)
     return origfn
 
 def disabled():
     '''find disabled extensions from hgext
     returns a dict of {name: desc}, and the max name length'''
 
     import hgext
     extpath = os.path.dirname(os.path.abspath(hgext.__file__))
 
     exts = {}
     maxlength = 0
     for e in os.listdir(extpath):
 
         if e.endswith('.py'):
             name = e.rsplit('.', 1)[0]
             path = os.path.join(extpath, e)
         else:
             name = e
             path = os.path.join(extpath, e, '__init__.py')
             if not os.path.exists(path):
                 continue
 
         if name in exts or name in _order or name == '__init__':
             continue
 
         try:
             file = open(path)
         except IOError:
             continue
         else:
             doc = help.moduledoc(file)
             file.close()
 
         if doc: # extracting localized synopsis
             exts[name] = gettext(doc).splitlines()[0]
         else:
             exts[name] = _('(no help text available)')
 
         if len(name) > maxlength:
             maxlength = len(name)
 
     return exts, maxlength
 
 def enabled():
     '''return a dict of {name: desc} of extensions, and the max name length'''
 
     if not enabled:
         return {}, 0
 
     exts = {}
     maxlength = 0
     exthelps = []
     for ename, ext in extensions():
         doc = (gettext(ext.__doc__) or _('(no help text available)'))
         ename = ename.split('.')[-1]
         maxlength = max(len(ename), maxlength)
         exts[ename] = doc.splitlines(0)[0].strip()
 
     return exts, maxlength

mercurial/help.py

@@ -1,506 +1,513 b''
 # help.py - help data for mercurial
 #
 # Copyright 2006 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
+import textwrap
 from i18n import _
 import extensions
 
 
 def moduledoc(file):
     '''return the top-level python documentation for the given file
 
     Loosely inspired by pydoc.source_synopsis(), but rewritten to handle \'''
     as well as """ and to return the whole text instead of just the synopsis'''
     result = []
 
     line = file.readline()
     while line[:1] == '#' or not line.strip():
         line = file.readline()
         if not line: break
 
     start = line[:3]
     if start == '"""' or start == "'''":
         line = line[3:]
         while line:
             if line.rstrip().endswith(start):
                 line = line.split(start)[0]
                 if line:
                     result.append(line)
                 break
             elif not line:
                 return None # unmatched delimiter
             result.append(line)
             line = file.readline()
     else:
         return None
 
     return ''.join(result)
 
 def listexts(header, exts, maxlength):
     '''return a text listing of the given extensions'''
     if not exts:
         return ''
     result = '\n%s\n\n' % header
     for name, desc in sorted(exts.iteritems()):
-        result += ' %s   %s\n' % (name.ljust(maxlength), desc)
+        # wrap desc at 70 characters, just like the main help texts
+        desc = textwrap.wrap(desc, width=70 - maxlength - 4)
+        pad = '\n' + ' ' * (maxlength + 4)
+        result += ' %s   %s\n' % (name.ljust(maxlength),
+                                  pad.join(desc))
     return result
 
 def extshelp():
     doc = _(r'''
-    Mercurial has a mechanism for adding new features through the
-    use of extensions. Extensions may bring new commands, or new
-    hooks, or change Mercurial's behavior.
+    Mercurial has the ability to add new features through the use of
+    extensions. Extensions may add new commands, add options to
+    existing commands, change the default behavior of commands, or
+    implement hooks.
 
-    Extensions are not loaded by default for a variety of reasons,
-    they may be meant for advanced users or provide potentially
-    dangerous commands (e.g. mq and rebase allow history to be
-    rewritten), they might not be ready for prime-time yet, or
-    they may alter Mercurial's behavior. It is thus up to the user
-    to activate extensions as desired.
+    Extensions are not loaded by default for a variety of reasons:
+    they can increase startup overhead; they may be meant for
+    advanced usage only; they may provide potentially dangerous
+    abilities (such as letting you destroy or modify history); they
+    might not be ready for prime time; or they may alter some
+    usual behaviors of stock Mercurial. It is thus up to the user to
+    activate extensions as needed.
 
     To enable the "foo" extension, either shipped with Mercurial
     or in the Python search path, create an entry for it in your
     hgrc, like this:
 
       [extensions]
       foo =
 
     You may also specify the full path to an extension:
 
       [extensions]
       myfeature = ~/.hgext/myfeature.py
 
     To explicitly disable an extension enabled in an hgrc of broader
     scope, prepend its path with !:
 
       [extensions]
-      # disabling extension bar residing in /ext/path
+      # disabling extension bar residing in /path/to/extension/bar.py
       hgext.bar = !/path/to/extension/bar.py
       # ditto, but no path was supplied for extension baz
       hgext.baz = !
     ''')
 
     exts, maxlength = extensions.enabled()
     doc += listexts(_('enabled extensions:'), exts, maxlength)
 
     exts, maxlength = extensions.disabled()
     doc += listexts(_('disabled extensions:'), exts, maxlength)
 
     return doc
 
 helptable = (
     (["dates"], _("Date Formats"),
      _(r'''
     Some commands allow the user to specify a date, e.g.:
     * backout, commit, import, tag: Specify the commit date.
     * log, revert, update: Select revision(s) by date.
 
     Many date formats are valid. Here are some examples:
 
     "Wed Dec 6 13:18:29 2006" (local timezone assumed)
     "Dec 6 13:18 -0600" (year assumed, time offset provided)
     "Dec 6 13:18 UTC" (UTC and GMT are aliases for +0000)
     "Dec 6" (midnight)
     "13:18" (today assumed)
     "3:39" (3:39AM assumed)
     "3:39pm" (15:39)
     "2006-12-06 13:18:29" (ISO 8601 format)
     "2006-12-6 13:18"
     "2006-12-6"
     "12-6"
     "12/6"
     "12/6/6" (Dec 6 2006)
 
     Lastly, there is Mercurial's internal format:
 
     "1165432709 0" (Wed Dec 6 13:18:29 2006 UTC)
 
     This is the internal representation format for dates. unixtime is
     the number of seconds since the epoch (1970-01-01 00:00 UTC).
     offset is the offset of the local timezone, in seconds west of UTC
     (negative if the timezone is east of UTC).
 
     The log command also accepts date ranges:
 
     "<{datetime}" - at or before a given date/time
     ">{datetime}" - on or after a given date/time
     "{datetime} to {datetime}" - a date range, inclusive
     "-{days}" - within a given number of days of today
     ''')),
 
     (["patterns"], _("File Name Patterns"),
      _(r'''
     Mercurial accepts several notations for identifying one or more
     files at a time.
 
     By default, Mercurial treats filenames as shell-style extended
     glob patterns.
 
     Alternate pattern notations must be specified explicitly.
 
     To use a plain path name without any pattern matching, start it
     with "path:". These path names must completely match starting at
     the current repository root.
 
     To use an extended glob, start a name with "glob:". Globs are
     rooted at the current directory; a glob such as "*.c" will only
     match files in the current directory ending with ".c".
 
     The supported glob syntax extensions are "**" to match any string
     across path separators and "{a,b}" to mean "a or b".
 
     To use a Perl/Python regular expression, start a name with "re:".
     Regexp pattern matching is anchored at the root of the repository.
 
     Plain examples:
 
     path:foo/bar   a name bar in a directory named foo in the root of
                    the repository
     path:path:name a file or directory named "path:name"
 
     Glob examples:
 
     glob:*.c       any name ending in ".c" in the current directory
     *.c            any name ending in ".c" in the current directory
     **.c           any name ending in ".c" in any subdirectory of the
                    current directory including itself.
     foo/*.c        any name ending in ".c" in the directory foo
     foo/**.c       any name ending in ".c" in any subdirectory of foo
                    including itself.
 
     Regexp examples:
 
     re:.*\.c$      any name ending in ".c", anywhere in the repository
 
     ''')),
 
     (['environment', 'env'], _('Environment Variables'),
      _(r'''
 HG::
     Path to the 'hg' executable, automatically passed when running
     hooks, extensions or external tools. If unset or empty, this is
     the hg executable's name if it's frozen, or an executable named
     'hg' (with %PATHEXT% [defaulting to COM/EXE/BAT/CMD] extensions on
     Windows) is searched.
 
 HGEDITOR::
     This is the name of the editor to run when committing. See EDITOR.
 
     (deprecated, use .hgrc)
 
 HGENCODING::
     This overrides the default locale setting detected by Mercurial.
     This setting is used to convert data including usernames,
     changeset descriptions, tag names, and branches. This setting can
     be overridden with the --encoding command-line option.
 
 HGENCODINGMODE::
     This sets Mercurial's behavior for handling unknown characters
     while transcoding user input. The default is "strict", which
     causes Mercurial to abort if it can't map a character. Other
     settings include "replace", which replaces unknown characters, and
     "ignore", which drops them. This setting can be overridden with
     the --encodingmode command-line option.
 
 HGMERGE::
     An executable to use for resolving merge conflicts. The program
     will be executed with three arguments: local file, remote file,
     ancestor file.
 
     (deprecated, use .hgrc)
 
 HGRCPATH::
     A list of files or directories to search for hgrc files. Item
     separator is ":" on Unix, ";" on Windows. If HGRCPATH is not set,
     platform default search path is used. If empty, only the .hg/hgrc
     from the current repository is read.
 
     For each element in HGRCPATH:
     * if it's a directory, all files ending with .rc are added
     * otherwise, the file itself will be added
 
 HGUSER::
     This is the string used as the author of a commit. If not set,
     available values will be considered in this order:
 
     * HGUSER (deprecated)
     * hgrc files from the HGRCPATH
     * EMAIL
     * interactive prompt
     * LOGNAME (with '@hostname' appended)
 
     (deprecated, use .hgrc)
 
 EMAIL::
     May be used as the author of a commit; see HGUSER.
 
 LOGNAME::
     May be used as the author of a commit; see HGUSER.
 
 VISUAL::
     This is the name of the editor to use when committing. See EDITOR.
 
 EDITOR::
     Sometimes Mercurial needs to open a text file in an editor for a
     user to modify, for example when writing commit messages. The
     editor it uses is determined by looking at the environment
     variables HGEDITOR, VISUAL and EDITOR, in that order. The first
     non-empty one is chosen. If all of them are empty, the editor
     defaults to 'vi'.
 
 PYTHONPATH::
     This is used by Python to find imported modules and may need to be
     set appropriately if this Mercurial is not installed system-wide.
     ''')),
 
     (['revs', 'revisions'], _('Specifying Single Revisions'),
      _(r'''
     Mercurial supports several ways to specify individual revisions.
 
     A plain integer is treated as a revision number. Negative integers
     are treated as topological offsets from the tip, with -1 denoting
     the tip. As such, negative numbers are only useful if you've
     memorized your local tree numbers and want to save typing a single
     digit. This editor suggests copy and paste.
 
     A 40-digit hexadecimal string is treated as a unique revision
     identifier.
 
     A hexadecimal string less than 40 characters long is treated as a
     unique revision identifier, and referred to as a short-form
     identifier. A short-form identifier is only valid if it is the
     prefix of exactly one full-length identifier.
 
     Any other string is treated as a tag name, which is a symbolic
     name associated with a revision identifier. Tag names may not
     contain the ":" character.
 
     The reserved name "tip" is a special tag that always identifies
     the most recent revision.
 
     The reserved name "null" indicates the null revision. This is the
     revision of an empty repository, and the parent of revision 0.
 
     The reserved name "." indicates the working directory parent. If
     no working directory is checked out, it is equivalent to null. If
     an uncommitted merge is in progress, "." is the revision of the
     first parent.
     ''')),
 
     (['mrevs', 'multirevs'], _('Specifying Multiple Revisions'),
      _(r'''
     When Mercurial accepts more than one revision, they may be
     specified individually, or provided as a topologically continuous
     range, separated by the ":" character.
 
     The syntax of range notation is [BEGIN]:[END], where BEGIN and END
     are revision identifiers. Both BEGIN and END are optional. If
     BEGIN is not specified, it defaults to revision number 0. If END
     is not specified, it defaults to the tip. The range ":" thus means
     "all revisions".
 
     If BEGIN is greater than END, revisions are treated in reverse
     order.
 
     A range acts as a closed interval. This means that a range of 3:5
     gives 3, 4 and 5. Similarly, a range of 9:6 gives 9, 8, 7, and 6.
     ''')),
 
     (['diffs'], _('Diff Formats'),
      _(r'''
     Mercurial's default format for showing changes between two
     versions of a file is compatible with the unified format of GNU
     diff, which can be used by GNU patch and many other standard
     tools.
 
     While this standard format is often enough, it does not encode the
     following information:
 
      - executable status and other permission bits
      - copy or rename information
      - changes in binary files
      - creation or deletion of empty files
 
     Mercurial also supports the extended diff format from the git VCS
     which addresses these limitations. The git diff format is not
     produced by default because a few widespread tools still do not
     understand this format.
 
     This means that when generating diffs from a Mercurial repository
     (e.g. with "hg export"), you should be careful about things like
     file copies and renames or other things mentioned above, because
     when applying a standard diff to a different repository, this
     extra information is lost. Mercurial's internal operations (like
     push and pull) are not affected by this, because they use an
     internal binary format for communicating changes.
 
     To make Mercurial produce the git extended diff format, use the
     --git option available for many commands, or set 'git = True' in
     the [diff] section of your hgrc. You do not need to set this
     option when importing diffs in this format or using them in the mq
     extension.
     ''')),
     (['templating'], _('Template Usage'),
      _(r'''
     Mercurial allows you to customize output of commands through
     templates. You can either pass in a template from the command
     line, via the --template option, or select an existing
     template-style (--style).
 
     You can customize output for any "log-like" command: log,
     outgoing, incoming, tip, parents, heads and glog.
 
     Three styles are packaged with Mercurial: default (the style used
     when no explicit preference is passed), compact and changelog.
     Usage:
 
         $ hg log -r1 --style changelog
 
     A template is a piece of text, with markup to invoke variable
     expansion:
 
         $ hg log -r1 --template "{node}\n"
         b56ce7b07c52de7d5fd79fb89701ea538af65746
 
     Strings in curly braces are called keywords. The availability of
     keywords depends on the exact context of the templater. These
     keywords are usually available for templating a log-like command:
 
     - author: String. The unmodified author of the changeset.
     - branches: String. The name of the branch on which the changeset
           was committed. Will be empty if the branch name was default.
     - date: Date information. The date when the changeset was committed.
     - desc: String. The text of the changeset description.
     - diffstat: String. Statistics of changes with the following
           format: "modified files: +added/-removed lines"
     - files: List of strings. All files modified, added, or removed by
           this changeset.
     - file_adds: List of strings. Files added by this changeset.
     - file_mods: List of strings. Files modified by this changeset.
     - file_dels: List of strings. Files removed by this changeset.
     - node: String. The changeset identification hash, as a
           40-character hexadecimal string.
     - parents: List of strings. The parents of the changeset.
     - rev: Integer. The repository-local changeset revision number.
     - tags: List of strings. Any tags associated with the changeset.
 
     The "date" keyword does not produce human-readable output. If you
     want to use a date in your output, you can use a filter to process
     it. Filters are functions which return a string based on the input
     variable. You can also use a chain of filters to get the desired
     output:
 
        $ hg tip --template "{date|isodate}\n"
        2008-08-21 18:22 +0000
 
     List of filters:
 
     - addbreaks: Any text. Add an XHTML "<br />" tag before the end of
           every line except the last.
     - age: Date. Returns a human-readable date/time difference between
           the given date/time and the current date/time.
     - basename: Any text. Treats the text as a path, and returns the
           last component of the path after splitting by the path
           separator (ignoring trailing separators). For example,
           "foo/bar/baz" becomes "baz" and "foo/bar//" becomes "bar".
     - stripdir: Treat the text as path and strip a directory level, if
           possible. For example, "foo" and "foo/bar" becomes "foo".
     - date: Date. Returns a date in a Unix date format, including
           the timezone: "Mon Sep 04 15:13:13 2006 0700".
     - domain: Any text. Finds the first string that looks like an
           email address, and extracts just the domain component.
           Example: 'User <[e-mail]>' becomes 'example.com'.
     - email: Any text. Extracts the first string that looks like an
           email address. Example: 'User <[e-mail]>' becomes
           '[e-mail]'.
     - escape: Any text. Replaces the special XML/XHTML characters "&",
           "<" and ">" with XML entities.
     - fill68: Any text. Wraps the text to fit in 68 columns.
     - fill76: Any text. Wraps the text to fit in 76 columns.
     - firstline: Any text. Returns the first line of text.
     - nonempty: Any text. Returns '(none)' if the string is empty.
     - hgdate: Date. Returns the date as a pair of numbers:
           "1157407993 25200" (Unix timestamp, timezone offset).
     - isodate: Date. Returns the date in ISO 8601 format.
     - localdate: Date. Converts a date to local date.
     - obfuscate: Any text. Returns the input text rendered as a
           sequence of XML entities.
     - person: Any text. Returns the text before an email address.
     - rfc822date: Date. Returns a date using the same format used
           in email headers.
     - short: Changeset hash. Returns the short form of a changeset
           hash, i.e. a 12-byte hexadecimal string.
     - shortdate: Date. Returns a date like "2006-09-18".
     - strip: Any text. Strips all leading and trailing whitespace.
     - tabindent: Any text. Returns the text, with every line except
           the first starting with a tab character.
     - urlescape: Any text. Escapes all "special" characters. For
           example, "foo bar" becomes "foo%20bar".
     - user: Any text. Returns the user portion of an email address.
     ''')),
 
     (['urls'], _('URL Paths'),
      _(r'''
     Valid URLs are of the form:
 
       local/filesystem/path (or file://local/filesystem/path)
       http://[user[:pass]@]host[:port]/[path]
       https://[user[:pass]@]host[:port]/[path]
       ssh://[user[:pass]@]host[:port]/[path]
 
     Paths in the local filesystem can either point to Mercurial
     repositories or to bundle files (as created by 'hg bundle' or
     'hg incoming --bundle').
 
     An optional identifier after # indicates a particular branch, tag,
     or changeset to use from the remote repository.
 
     Some features, such as pushing to http:// and https:// URLs are
     only possible if the feature is explicitly enabled on the remote
     Mercurial server.
 
     Some notes about using SSH with Mercurial:
     - SSH requires an accessible shell account on the destination
       machine and a copy of hg in the remote path or specified with as
       remotecmd.
     - path is relative to the remote user's home directory by default.
       Use an extra slash at the start of a path to specify an absolute path:
         ssh://example.com//tmp/repository
     - Mercurial doesn't use its own compression via SSH; the right
       thing to do is to configure it in your ~/.ssh/config, e.g.:
         Host *.mylocalnetwork.example.com
           Compression no
         Host *
           Compression yes
       Alternatively specify "ssh -C" as your ssh command in your hgrc
       or with the --ssh command line option.
 
     These URLs can all be stored in your hgrc with path aliases under
     the [paths] section like so:
     [paths]
     alias1 = URL1
     alias2 = URL2
     ...
 
     You can then use the alias for any command that uses a URL (for
     example 'hg pull alias1' would pull from the 'alias1' path).
 
     Two path aliases are special because they are used as defaults
     when you do not provide the URL to a command:
 
     default:
       When you create a repository with hg clone, the clone command
       saves the location of the source repository as the new
       repository's 'default' path. This is then used when you omit
       path from push- and pull-like commands (including incoming and
       outgoing).
 
     default-push:
       The push command will look for a path named 'default-push', and
       prefer it over 'default' if both are defined.
     ''')),
     (["extensions"], _("Using additional features"), extshelp),
 )