revbranchcache: move out of branchmap onto localrepo

Previously the revbranchcache was a field inside the branchmap. This is bad for
a couple reasons:

1) There can be multiple branchmaps per repo (one for each filter level). There
can only be one revbranchcache per repo. In fact, a revbranchcache could only
exist on a branchmap that was for the unfiltered view, so you could have
branchmaps exist for which you couldn't have a revbranchcache. It was funky.
2) The write lifecycle for the revbranchcache is going to be different from
the branchmap (branchmap is greedily written early on, revbranchcache
should be lazily computed and written).

This patch moves the revbranchcache to live as a field on the localrepo
(alongside self._branchmap). This will allow us to handle it's lifecycle
differently, which will let us move it to be lazily computed in future patches.

mercurial/branchmap.py

@@ -1,449 +1,448 b''
 # branchmap.py - logic to computes, maintain and stores branchmap for local repo
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from node import bin, hex, nullid, nullrev
 import encoding
 import util
 import time
 from array import array
 from struct import calcsize, pack, unpack
 
 def _filename(repo):
     """name of a branchcache file for a given repo or repoview"""
     filename = "cache/branch2"
     if repo.filtername:
         filename = '%s-%s' % (filename, repo.filtername)
     return filename
 
 def read(repo):
     try:
         f = repo.vfs(_filename(repo))
         lines = f.read().split('\n')
         f.close()
     except (IOError, OSError):
         return None
 
     try:
         cachekey = lines.pop(0).split(" ", 2)
         last, lrev = cachekey[:2]
         last, lrev = bin(last), int(lrev)
         filteredhash = None
         if len(cachekey) > 2:
             filteredhash = bin(cachekey[2])
         partial = branchcache(tipnode=last, tiprev=lrev,
                               filteredhash=filteredhash)
         if not partial.validfor(repo):
             # invalidate the cache
             raise ValueError('tip differs')
         for l in lines:
             if not l:
                 continue
             node, state, label = l.split(" ", 2)
             if state not in 'oc':
                 raise ValueError('invalid branch state')
             label = encoding.tolocal(label.strip())
             if not node in repo:
                 raise ValueError('node %s does not exist' % node)
             node = bin(node)
             partial.setdefault(label, []).append(node)
             if state == 'c':
                 partial._closednodes.add(node)
     except KeyboardInterrupt:
         raise
     except Exception, inst:
         if repo.ui.debugflag:
             msg = 'invalid branchheads cache'
             if repo.filtername is not None:
                 msg += ' (%s)' % repo.filtername
             msg += ': %s\n'
             repo.ui.debug(msg % inst)
         partial = None
     return partial
 
 ### Nearest subset relation
 # Nearest subset of filter X is a filter Y so that:
 # * Y is included in X,
 # * X - Y is as small as possible.
 # This create and ordering used for branchmap purpose.
 # the ordering may be partial
 subsettable = {None: 'visible',
                'visible': 'served',
                'served': 'immutable',
                'immutable': 'base'}
 
 def updatecache(repo):
     cl = repo.changelog
     filtername = repo.filtername
     partial = repo._branchcaches.get(filtername)
 
     revs = []
     if partial is None or not partial.validfor(repo):
         partial = read(repo)
         if partial is None:
             subsetname = subsettable.get(filtername)
             if subsetname is None:
                 partial = branchcache()
             else:
                 subset = repo.filtered(subsetname)
                 partial = subset.branchmap().copy()
                 extrarevs = subset.changelog.filteredrevs - cl.filteredrevs
                 revs.extend(r for  r in extrarevs if r <= partial.tiprev)
     revs.extend(cl.revs(start=partial.tiprev + 1))
     if revs:
         partial.update(repo, revs)
         partial.write(repo)
+
+    if repo._revbranchcache is not None:
+        repo._revbranchcache.write(repo)
+
     assert partial.validfor(repo), filtername
     repo._branchcaches[repo.filtername] = partial
 
 class branchcache(dict):
     """A dict like object that hold branches heads cache.
 
     This cache is used to avoid costly computations to determine all the
     branch heads of a repo.
 
     The cache is serialized on disk in the following format:
 
     <tip hex node> <tip rev number> [optional filtered repo hex hash]
     <branch head hex node> <open/closed state> <branch name>
     <branch head hex node> <open/closed state> <branch name>
     ...
 
     The first line is used to check if the cache is still valid. If the
     branch cache is for a filtered repo view, an optional third hash is
     included that hashes the hashes of all filtered revisions.
 
     The open/closed state is represented by a single letter 'o' or 'c'.
     This field can be used to avoid changelog reads when determining if a
     branch head closes a branch or not.
     """
 
     def __init__(self, entries=(), tipnode=nullid, tiprev=nullrev,
                  filteredhash=None, closednodes=None):
         super(branchcache, self).__init__(entries)
         self.tipnode = tipnode
         self.tiprev = tiprev
         self.filteredhash = filteredhash
         # closednodes is a set of nodes that close their branch. If the branch
         # cache has been updated, it may contain nodes that are no longer
         # heads.
         if closednodes is None:
             self._closednodes = set()
         else:
             self._closednodes = closednodes
-        self._revbranchcache = None
 
     def _hashfiltered(self, repo):
         """build hash of revision filtered in the current cache
 
         Tracking tipnode and tiprev is not enough to ensure validity of the
         cache as they do not help to distinct cache that ignored various
         revision bellow tiprev.
 
         To detect such difference, we build a cache of all ignored revisions.
         """
         cl = repo.changelog
         if not cl.filteredrevs:
             return None
         key = None
         revs = sorted(r for r in cl.filteredrevs if r <= self.tiprev)
         if revs:
             s = util.sha1()
             for rev in revs:
                 s.update('%s;' % rev)
             key = s.digest()
         return key
 
     def validfor(self, repo):
         """Is the cache content valid regarding a repo
 
         - False when cached tipnode is unknown or if we detect a strip.
         - True when cache is up to date or a subset of current repo."""
         try:
             return ((self.tipnode == repo.changelog.node(self.tiprev))
                     and (self.filteredhash == self._hashfiltered(repo)))
         except IndexError:
             return False
 
     def _branchtip(self, heads):
         '''Return tuple with last open head in heads and false,
         otherwise return last closed head and true.'''
         tip = heads[-1]
         closed = True
         for h in reversed(heads):
             if h not in self._closednodes:
                 tip = h
                 closed = False
                 break
         return tip, closed
 
     def branchtip(self, branch):
         '''Return the tipmost open head on branch head, otherwise return the
         tipmost closed head on branch.
         Raise KeyError for unknown branch.'''
         return self._branchtip(self[branch])[0]
 
     def branchheads(self, branch, closed=False):
         heads = self[branch]
         if not closed:
             heads = [h for h in heads if h not in self._closednodes]
         return heads
 
     def iterbranches(self):
         for bn, heads in self.iteritems():
             yield (bn, heads) + self._branchtip(heads)
 
     def copy(self):
         """return an deep copy of the branchcache object"""
         return branchcache(self, self.tipnode, self.tiprev, self.filteredhash,
                            self._closednodes)
 
     def write(self, repo):
         try:
             f = repo.vfs(_filename(repo), "w", atomictemp=True)
             cachekey = [hex(self.tipnode), str(self.tiprev)]
             if self.filteredhash is not None:
                 cachekey.append(hex(self.filteredhash))
             f.write(" ".join(cachekey) + '\n')
             nodecount = 0
             for label, nodes in sorted(self.iteritems()):
                 for node in nodes:
                     nodecount += 1
                     if node in self._closednodes:
                         state = 'c'
                     else:
                         state = 'o'
                     f.write("%s %s %s\n" % (hex(node), state,
                                             encoding.fromlocal(label)))
             f.close()
             repo.ui.log('branchcache',
                         'wrote %s branch cache with %d labels and %d nodes\n',
                         repo.filtername, len(self), nodecount)
         except (IOError, OSError, util.Abort), inst:
             repo.ui.debug("couldn't write branch cache: %s\n" % inst)
             # Abort may be raise by read only opener
             pass
-        if self._revbranchcache:
-            self._revbranchcache.write(repo.unfiltered())
-            self._revbranchcache = None
 
     def update(self, repo, revgen):
         """Given a branchhead cache, self, that may have extra nodes or be
         missing heads, and a generator of nodes that are strictly a superset of
         heads missing, this function updates self to be correct.
         """
         starttime = time.time()
         cl = repo.changelog
         # collect new branch entries
         newbranches = {}
         urepo = repo.unfiltered()
-        self._revbranchcache = revbranchcache(urepo)
-        getbranchinfo = self._revbranchcache.branchinfo
         ucl = urepo.changelog
+        getbranchinfo = repo.revbranchcache().branchinfo
         for r in revgen:
             branch, closesbranch = getbranchinfo(ucl, r)
             newbranches.setdefault(branch, []).append(r)
             if closesbranch:
                 self._closednodes.add(cl.node(r))
 
         # fetch current topological heads to speed up filtering
         topoheads = set(cl.headrevs())
 
         # if older branchheads are reachable from new ones, they aren't
         # really branchheads. Note checking parents is insufficient:
         # 1 (branch a) -> 2 (branch b) -> 3 (branch a)
         for branch, newheadrevs in newbranches.iteritems():
             bheads = self.setdefault(branch, [])
             bheadset = set(cl.rev(node) for node in bheads)
 
             # This have been tested True on all internal usage of this function.
             # run it again in case of doubt
             # assert not (set(bheadrevs) & set(newheadrevs))
             newheadrevs.sort()
             bheadset.update(newheadrevs)
 
             # This prunes out two kinds of heads - heads that are superseded by
             # a head in newheadrevs, and newheadrevs that are not heads because
             # an existing head is their descendant.
             uncertain = bheadset - topoheads
             if uncertain:
                 floorrev = min(uncertain)
                 ancestors = set(cl.ancestors(newheadrevs, floorrev))
                 bheadset -= ancestors
             bheadrevs = sorted(bheadset)
             self[branch] = [cl.node(rev) for rev in bheadrevs]
             tiprev = bheadrevs[-1]
             if tiprev > self.tiprev:
                 self.tipnode = cl.node(tiprev)
                 self.tiprev = tiprev
 
         if not self.validfor(repo):
             # cache key are not valid anymore
             self.tipnode = nullid
             self.tiprev = nullrev
             for heads in self.values():
                 tiprev = max(cl.rev(node) for node in heads)
                 if tiprev > self.tiprev:
                     self.tipnode = cl.node(tiprev)
                     self.tiprev = tiprev
         self.filteredhash = self._hashfiltered(repo)
 
         duration = time.time() - starttime
         repo.ui.log('branchcache', 'updated %s branch cache in %.4f seconds\n',
                     repo.filtername, duration)
 
 # Revision branch info cache
 
 _rbcversion = '-v1'
 _rbcnames = 'cache/rbc-names' + _rbcversion
 _rbcrevs = 'cache/rbc-revs' + _rbcversion
 # [4 byte hash prefix][4 byte branch name number with sign bit indicating open]
 _rbcrecfmt = '>4sI'
 _rbcrecsize = calcsize(_rbcrecfmt)
 _rbcnodelen = 4
 _rbcbranchidxmask = 0x7fffffff
 _rbccloseflag = 0x80000000
 
 class revbranchcache(object):
     """Persistent cache, mapping from revision number to branch name and close.
     This is a low level cache, independent of filtering.
 
     Branch names are stored in rbc-names in internal encoding separated by 0.
     rbc-names is append-only, and each branch name is only stored once and will
     thus have a unique index.
 
     The branch info for each revision is stored in rbc-revs as constant size
     records. The whole file is read into memory, but it is only 'parsed' on
     demand. The file is usually append-only but will be truncated if repo
     modification is detected.
     The record for each revision contains the first 4 bytes of the
     corresponding node hash, and the record is only used if it still matches.
     Even a completely trashed rbc-revs fill thus still give the right result
     while converging towards full recovery ... assuming no incorrectly matching
     node hashes.
     The record also contains 4 bytes where 31 bits contains the index of the
     branch and the last bit indicate that it is a branch close commit.
     The usage pattern for rbc-revs is thus somewhat similar to 00changelog.i
     and will grow with it but be 1/8th of its size.
     """
 
     def __init__(self, repo, readonly=True):
         assert repo.filtername is None
         self._names = [] # branch names in local encoding with static index
         self._rbcrevs = array('c') # structs of type _rbcrecfmt
         self._rbcsnameslen = 0
         try:
             bndata = repo.vfs.read(_rbcnames)
             self._rbcsnameslen = len(bndata) # for verification before writing
             self._names = [encoding.tolocal(bn) for bn in bndata.split('\0')]
         except (IOError, OSError), inst:
             repo.ui.debug("couldn't read revision branch cache names: %s\n" %
                           inst)
             if readonly:
                 # don't try to use cache - fall back to the slow path
                 self.branchinfo = self._branchinfo
 
         if self._names:
             try:
                 data = repo.vfs.read(_rbcrevs)
                 self._rbcrevs.fromstring(data)
             except (IOError, OSError), inst:
                 repo.ui.debug("couldn't read revision branch cache: %s\n" %
                               inst)
         # remember number of good records on disk
         self._rbcrevslen = min(len(self._rbcrevs) // _rbcrecsize,
                                len(repo.changelog))
         if self._rbcrevslen == 0:
             self._names = []
         self._rbcnamescount = len(self._names) # number of good names on disk
         self._namesreverse = dict((b, r) for r, b in enumerate(self._names))
 
     def branchinfo(self, changelog, rev):
         """Return branch name and close flag for rev, using and updating
         persistent cache."""
         rbcrevidx = rev * _rbcrecsize
 
         # if requested rev is missing, add and populate all missing revs
         if len(self._rbcrevs) < rbcrevidx + _rbcrecsize:
             first = len(self._rbcrevs) // _rbcrecsize
             self._rbcrevs.extend('\0' * (len(changelog) * _rbcrecsize -
                                          len(self._rbcrevs)))
             for r in xrange(first, len(changelog)):
                 self._branchinfo(changelog, r)
 
         # fast path: extract data from cache, use it if node is matching
         reponode = changelog.node(rev)[:_rbcnodelen]
         cachenode, branchidx = unpack(
             _rbcrecfmt, buffer(self._rbcrevs, rbcrevidx, _rbcrecsize))
         close = bool(branchidx & _rbccloseflag)
         if close:
             branchidx &= _rbcbranchidxmask
         if cachenode == reponode:
             return self._names[branchidx], close
         # fall back to slow path and make sure it will be written to disk
         self._rbcrevslen = min(self._rbcrevslen, rev)
         return self._branchinfo(changelog, rev)
 
     def _branchinfo(self, changelog, rev):
         """Retrieve branch info from changelog and update _rbcrevs"""
         b, close = changelog.branchinfo(rev)
         if b in self._namesreverse:
             branchidx = self._namesreverse[b]
         else:
             branchidx = len(self._names)
             self._names.append(b)
             self._namesreverse[b] = branchidx
         reponode = changelog.node(rev)
         if close:
             branchidx |= _rbccloseflag
         rbcrevidx = rev * _rbcrecsize
         rec = array('c')
         rec.fromstring(pack(_rbcrecfmt, reponode, branchidx))
         self._rbcrevs[rbcrevidx:rbcrevidx + _rbcrecsize] = rec
         return b, close
 
     def write(self, repo):
         """Save branch cache if it is dirty."""
         if self._rbcnamescount < len(self._names):
             try:
                 if self._rbcnamescount != 0:
                     f = repo.vfs.open(_rbcnames, 'ab')
                     if f.tell() == self._rbcsnameslen:
                         f.write('\0')
                     else:
                         f.close()
                         repo.ui.debug("%s changed - rewriting it\n" % _rbcnames)
                         self._rbcnamescount = 0
                         self._rbcrevslen = 0
                 if self._rbcnamescount == 0:
                     f = repo.vfs.open(_rbcnames, 'wb')
                 f.write('\0'.join(encoding.fromlocal(b)
                                   for b in self._names[self._rbcnamescount:]))
                 self._rbcsnameslen = f.tell()
                 f.close()
             except (IOError, OSError, util.Abort), inst:
                 repo.ui.debug("couldn't write revision branch cache names: "
                               "%s\n" % inst)
                 return
             self._rbcnamescount = len(self._names)
 
         start = self._rbcrevslen * _rbcrecsize
         if start != len(self._rbcrevs):
             revs = min(len(repo.changelog), len(self._rbcrevs) // _rbcrecsize)
             try:
                 f = repo.vfs.open(_rbcrevs, 'ab')
                 if f.tell() != start:
                     repo.ui.debug("truncating %s to %s\n" % (_rbcrevs, start))
                     f.seek(start)
                     f.truncate()
                 end = revs * _rbcrecsize
                 f.write(self._rbcrevs[start:end])
                 f.close()
             except (IOError, OSError, util.Abort), inst:
                 repo.ui.debug("couldn't write revision branch cache: %s\n" %
                               inst)
                 return
             self._rbcrevslen = revs

mercurial/localrepo.py

@@ -1,1887 +1,1894 b''
 # localrepo.py - read/write repository class for mercurial
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 from node import hex, nullid, short
 from i18n import _
 import urllib
 import peer, changegroup, subrepo, pushkey, obsolete, repoview
 import changelog, dirstate, filelog, manifest, context, bookmarks, phases
 import lock as lockmod
 import transaction, store, encoding, exchange, bundle2
 import scmutil, util, extensions, hook, error, revset
 import match as matchmod
 import merge as mergemod
 import tags as tagsmod
 from lock import release
 import weakref, errno, os, time, inspect
 import branchmap, pathutil
 import namespaces
 propertycache = util.propertycache
 filecache = scmutil.filecache
 
 class repofilecache(filecache):
     """All filecache usage on repo are done for logic that should be unfiltered
     """
 
     def __get__(self, repo, type=None):
         return super(repofilecache, self).__get__(repo.unfiltered(), type)
     def __set__(self, repo, value):
         return super(repofilecache, self).__set__(repo.unfiltered(), value)
     def __delete__(self, repo):
         return super(repofilecache, self).__delete__(repo.unfiltered())
 
 class storecache(repofilecache):
     """filecache for files in the store"""
     def join(self, obj, fname):
         return obj.sjoin(fname)
 
 class unfilteredpropertycache(propertycache):
     """propertycache that apply to unfiltered repo only"""
 
     def __get__(self, repo, type=None):
         unfi = repo.unfiltered()
         if unfi is repo:
             return super(unfilteredpropertycache, self).__get__(unfi)
         return getattr(unfi, self.name)
 
 class filteredpropertycache(propertycache):
     """propertycache that must take filtering in account"""
 
     def cachevalue(self, obj, value):
         object.__setattr__(obj, self.name, value)
 
 
 def hasunfilteredcache(repo, name):
     """check if a repo has an unfilteredpropertycache value for <name>"""
     return name in vars(repo.unfiltered())
 
 def unfilteredmethod(orig):
     """decorate method that always need to be run on unfiltered version"""
     def wrapper(repo, *args, **kwargs):
         return orig(repo.unfiltered(), *args, **kwargs)
     return wrapper
 
 moderncaps = set(('lookup', 'branchmap', 'pushkey', 'known', 'getbundle',
                   'unbundle'))
 legacycaps = moderncaps.union(set(['changegroupsubset']))
 
 class localpeer(peer.peerrepository):
     '''peer for a local repo; reflects only the most recent API'''
 
     def __init__(self, repo, caps=moderncaps):
         peer.peerrepository.__init__(self)
         self._repo = repo.filtered('served')
         self.ui = repo.ui
         self._caps = repo._restrictcapabilities(caps)
         self.requirements = repo.requirements
         self.supportedformats = repo.supportedformats
 
     def close(self):
         self._repo.close()
 
     def _capabilities(self):
         return self._caps
 
     def local(self):
         return self._repo
 
     def canpush(self):
         return True
 
     def url(self):
         return self._repo.url()
 
     def lookup(self, key):
         return self._repo.lookup(key)
 
     def branchmap(self):
         return self._repo.branchmap()
 
     def heads(self):
         return self._repo.heads()
 
     def known(self, nodes):
         return self._repo.known(nodes)
 
     def getbundle(self, source, heads=None, common=None, bundlecaps=None,
                   format='HG10', **kwargs):
         cg = exchange.getbundle(self._repo, source, heads=heads,
                                 common=common, bundlecaps=bundlecaps, **kwargs)
         if bundlecaps is not None and 'HG2Y' in bundlecaps:
             # When requesting a bundle2, getbundle returns a stream to make the
             # wire level function happier. We need to build a proper object
             # from it in local peer.
             cg = bundle2.unbundle20(self.ui, cg)
         return cg
 
     # TODO We might want to move the next two calls into legacypeer and add
     # unbundle instead.
 
     def unbundle(self, cg, heads, url):
         """apply a bundle on a repo
 
         This function handles the repo locking itself."""
         try:
             cg = exchange.readbundle(self.ui, cg, None)
             ret = exchange.unbundle(self._repo, cg, heads, 'push', url)
             if util.safehasattr(ret, 'getchunks'):
                 # This is a bundle20 object, turn it into an unbundler.
                 # This little dance should be dropped eventually when the API
                 # is finally improved.
                 stream = util.chunkbuffer(ret.getchunks())
                 ret = bundle2.unbundle20(self.ui, stream)
             return ret
         except error.PushRaced, exc:
             raise error.ResponseError(_('push failed:'), str(exc))
 
     def lock(self):
         return self._repo.lock()
 
     def addchangegroup(self, cg, source, url):
         return changegroup.addchangegroup(self._repo, cg, source, url)
 
     def pushkey(self, namespace, key, old, new):
         return self._repo.pushkey(namespace, key, old, new)
 
     def listkeys(self, namespace):
         return self._repo.listkeys(namespace)
 
     def debugwireargs(self, one, two, three=None, four=None, five=None):
         '''used to test argument passing over the wire'''
         return "%s %s %s %s %s" % (one, two, three, four, five)
 
 class locallegacypeer(localpeer):
     '''peer extension which implements legacy methods too; used for tests with
     restricted capabilities'''
 
     def __init__(self, repo):
         localpeer.__init__(self, repo, caps=legacycaps)
 
     def branches(self, nodes):
         return self._repo.branches(nodes)
 
     def between(self, pairs):
         return self._repo.between(pairs)
 
     def changegroup(self, basenodes, source):
         return changegroup.changegroup(self._repo, basenodes, source)
 
     def changegroupsubset(self, bases, heads, source):
         return changegroup.changegroupsubset(self._repo, bases, heads, source)
 
 class localrepository(object):
 
     supportedformats = set(('revlogv1', 'generaldelta'))
     _basesupported = supportedformats | set(('store', 'fncache', 'shared',
                                              'dotencode'))
     openerreqs = set(('revlogv1', 'generaldelta'))
     requirements = ['revlogv1']
     filtername = None
 
     # a list of (ui, featureset) functions.
     # only functions defined in module of enabled extensions are invoked
     featuresetupfuncs = set()
 
     def _baserequirements(self, create):
         return self.requirements[:]
 
     def __init__(self, baseui, path=None, create=False):
         self.wvfs = scmutil.vfs(path, expandpath=True, realpath=True)
         self.wopener = self.wvfs
         self.root = self.wvfs.base
         self.path = self.wvfs.join(".hg")
         self.origroot = path
         self.auditor = pathutil.pathauditor(self.root, self._checknested)
         self.vfs = scmutil.vfs(self.path)
         self.opener = self.vfs
         self.baseui = baseui
         self.ui = baseui.copy()
         self.ui.copy = baseui.copy # prevent copying repo configuration
         # A list of callback to shape the phase if no data were found.
         # Callback are in the form: func(repo, roots) --> processed root.
         # This list it to be filled by extension during repo setup
         self._phasedefaults = []
         try:
             self.ui.readconfig(self.join("hgrc"), self.root)
             extensions.loadall(self.ui)
         except IOError:
             pass
 
         if self.featuresetupfuncs:
             self.supported = set(self._basesupported) # use private copy
             extmods = set(m.__name__ for n, m
                           in extensions.extensions(self.ui))
             for setupfunc in self.featuresetupfuncs:
                 if setupfunc.__module__ in extmods:
                     setupfunc(self.ui, self.supported)
         else:
             self.supported = self._basesupported
 
         if not self.vfs.isdir():
             if create:
                 if not self.wvfs.exists():
                     self.wvfs.makedirs()
                 self.vfs.makedir(notindexed=True)
                 requirements = self._baserequirements(create)
                 if self.ui.configbool('format', 'usestore', True):
                     self.vfs.mkdir("store")
                     requirements.append("store")
                     if self.ui.configbool('format', 'usefncache', True):
                         requirements.append("fncache")
                         if self.ui.configbool('format', 'dotencode', True):
                             requirements.append('dotencode')
                     # create an invalid changelog
                     self.vfs.append(
                         "00changelog.i",
                         '\0\0\0\2' # represents revlogv2
                         ' dummy changelog to prevent using the old repo layout'
                     )
                 if self.ui.configbool('format', 'generaldelta', False):
                     requirements.append("generaldelta")
                 requirements = set(requirements)
             else:
                 raise error.RepoError(_("repository %s not found") % path)
         elif create:
             raise error.RepoError(_("repository %s already exists") % path)
         else:
             try:
                 requirements = scmutil.readrequires(self.vfs, self.supported)
             except IOError, inst:
                 if inst.errno != errno.ENOENT:
                     raise
                 requirements = set()
 
         self.sharedpath = self.path
         try:
             vfs = scmutil.vfs(self.vfs.read("sharedpath").rstrip('\n'),
                               realpath=True)
             s = vfs.base
             if not vfs.exists():
                 raise error.RepoError(
                     _('.hg/sharedpath points to nonexistent directory %s') % s)
             self.sharedpath = s
         except IOError, inst:
             if inst.errno != errno.ENOENT:
                 raise
 
         self.store = store.store(requirements, self.sharedpath, scmutil.vfs)
         self.spath = self.store.path
         self.svfs = self.store.vfs
         self.sopener = self.svfs
         self.sjoin = self.store.join
         self.vfs.createmode = self.store.createmode
         self._applyrequirements(requirements)
         if create:
             self._writerequirements()
 
 
         self._branchcaches = {}
+        self._revbranchcache = None
         self.filterpats = {}
         self._datafilters = {}
         self._transref = self._lockref = self._wlockref = None
 
         # A cache for various files under .hg/ that tracks file changes,
         # (used by the filecache decorator)
         #
         # Maps a property name to its util.filecacheentry
         self._filecache = {}
 
         # hold sets of revision to be filtered
         # should be cleared when something might have changed the filter value:
         # - new changesets,
         # - phase change,
         # - new obsolescence marker,
         # - working directory parent change,
         # - bookmark changes
         self.filteredrevcache = {}
 
         # generic mapping between names and nodes
         self.names = namespaces.namespaces()
 
     def close(self):
         pass
 
     def _restrictcapabilities(self, caps):
         # bundle2 is not ready for prime time, drop it unless explicitly
         # required by the tests (or some brave tester)
         if self.ui.configbool('experimental', 'bundle2-exp', False):
             caps = set(caps)
             capsblob = bundle2.encodecaps(bundle2.getrepocaps(self))
             caps.add('bundle2-exp=' + urllib.quote(capsblob))
         return caps
 
     def _applyrequirements(self, requirements):
         self.requirements = requirements
         self.svfs.options = dict((r, 1) for r in requirements
                                            if r in self.openerreqs)
         chunkcachesize = self.ui.configint('format', 'chunkcachesize')
         if chunkcachesize is not None:
             self.svfs.options['chunkcachesize'] = chunkcachesize
         maxchainlen = self.ui.configint('format', 'maxchainlen')
         if maxchainlen is not None:
             self.svfs.options['maxchainlen'] = maxchainlen
         manifestcachesize = self.ui.configint('format', 'manifestcachesize')
         if manifestcachesize is not None:
             self.svfs.options['manifestcachesize'] = manifestcachesize
 
     def _writerequirements(self):
         reqfile = self.vfs("requires", "w")
         for r in sorted(self.requirements):
             reqfile.write("%s\n" % r)
         reqfile.close()
 
     def _checknested(self, path):
         """Determine if path is a legal nested repository."""
         if not path.startswith(self.root):
             return False
         subpath = path[len(self.root) + 1:]
         normsubpath = util.pconvert(subpath)
 
         # XXX: Checking against the current working copy is wrong in
         # the sense that it can reject things like
         #
         #   $ hg cat -r 10 sub/x.txt
         #
         # if sub/ is no longer a subrepository in the working copy
         # parent revision.
         #
         # However, it can of course also allow things that would have
         # been rejected before, such as the above cat command if sub/
         # is a subrepository now, but was a normal directory before.
         # The old path auditor would have rejected by mistake since it
         # panics when it sees sub/.hg/.
         #
         # All in all, checking against the working copy seems sensible
         # since we want to prevent access to nested repositories on
         # the filesystem *now*.
         ctx = self[None]
         parts = util.splitpath(subpath)
         while parts:
             prefix = '/'.join(parts)
             if prefix in ctx.substate:
                 if prefix == normsubpath:
                     return True
                 else:
                     sub = ctx.sub(prefix)
                     return sub.checknested(subpath[len(prefix) + 1:])
             else:
                 parts.pop()
         return False
 
     def peer(self):
         return localpeer(self) # not cached to avoid reference cycle
 
     def unfiltered(self):
         """Return unfiltered version of the repository
 
         Intended to be overwritten by filtered repo."""
         return self
 
     def filtered(self, name):
         """Return a filtered version of a repository"""
         # build a new class with the mixin and the current class
         # (possibly subclass of the repo)
         class proxycls(repoview.repoview, self.unfiltered().__class__):
             pass
         return proxycls(self, name)
 
     @repofilecache('bookmarks')
     def _bookmarks(self):
         return bookmarks.bmstore(self)
 
     @repofilecache('bookmarks.current')
     def _bookmarkcurrent(self):
         return bookmarks.readcurrent(self)
 
     def bookmarkheads(self, bookmark):
         name = bookmark.split('@', 1)[0]
         heads = []
         for mark, n in self._bookmarks.iteritems():
             if mark.split('@', 1)[0] == name:
                 heads.append(n)
         return heads
 
     @storecache('phaseroots')
     def _phasecache(self):
         return phases.phasecache(self, self._phasedefaults)
 
     @storecache('obsstore')
     def obsstore(self):
         # read default format for new obsstore.
         defaultformat = self.ui.configint('format', 'obsstore-version', None)
         # rely on obsstore class default when possible.
         kwargs = {}
         if defaultformat is not None:
             kwargs['defaultformat'] = defaultformat
         readonly = not obsolete.isenabled(self, obsolete.createmarkersopt)
         store = obsolete.obsstore(self.svfs, readonly=readonly,
                                   **kwargs)
         if store and readonly:
             # message is rare enough to not be translated
             msg = 'obsolete feature not enabled but %i markers found!\n'
             self.ui.warn(msg % len(list(store)))
         return store
 
     @storecache('00changelog.i')
     def changelog(self):
         c = changelog.changelog(self.svfs)
         if 'HG_PENDING' in os.environ:
             p = os.environ['HG_PENDING']
             if p.startswith(self.root):
                 c.readpending('00changelog.i.a')
         return c
 
     @storecache('00manifest.i')
     def manifest(self):
         return manifest.manifest(self.svfs)
 
     @repofilecache('dirstate')
     def dirstate(self):
         warned = [0]
         def validate(node):
             try:
                 self.changelog.rev(node)
                 return node
             except error.LookupError:
                 if not warned[0]:
                     warned[0] = True
                     self.ui.warn(_("warning: ignoring unknown"
                                    " working parent %s!\n") % short(node))
                 return nullid
 
         return dirstate.dirstate(self.vfs, self.ui, self.root, validate)
 
     def __getitem__(self, changeid):
         if changeid is None:
             return context.workingctx(self)
         if isinstance(changeid, slice):
             return [context.changectx(self, i)
                     for i in xrange(*changeid.indices(len(self)))
                     if i not in self.changelog.filteredrevs]
         return context.changectx(self, changeid)
 
     def __contains__(self, changeid):
         try:
             self[changeid]
             return True
         except error.RepoLookupError:
             return False
 
     def __nonzero__(self):
         return True
 
     def __len__(self):
         return len(self.changelog)
 
     def __iter__(self):
         return iter(self.changelog)
 
     def revs(self, expr, *args):
         '''Return a list of revisions matching the given revset'''
         expr = revset.formatspec(expr, *args)
         m = revset.match(None, expr)
         return m(self)
 
     def set(self, expr, *args):
         '''
         Yield a context for each matching revision, after doing arg
         replacement via revset.formatspec
         '''
         for r in self.revs(expr, *args):
             yield self[r]
 
     def url(self):
         return 'file:' + self.root
 
     def hook(self, name, throw=False, **args):
         """Call a hook, passing this repo instance.
 
         This a convenience method to aid invoking hooks. Extensions likely
         won't call this unless they have registered a custom hook or are
         replacing code that is expected to call a hook.
         """
         return hook.hook(self.ui, self, name, throw, **args)
 
     @unfilteredmethod
     def _tag(self, names, node, message, local, user, date, extra={},
              editor=False):
         if isinstance(names, str):
             names = (names,)
 
         branches = self.branchmap()
         for name in names:
             self.hook('pretag', throw=True, node=hex(node), tag=name,
                       local=local)
             if name in branches:
                 self.ui.warn(_("warning: tag %s conflicts with existing"
                 " branch name\n") % name)
 
         def writetags(fp, names, munge, prevtags):
             fp.seek(0, 2)
             if prevtags and prevtags[-1] != '\n':
                 fp.write('\n')
             for name in names:
                 if munge:
                     m = munge(name)
                 else:
                     m = name
 
                 if (self._tagscache.tagtypes and
                     name in self._tagscache.tagtypes):
                     old = self.tags().get(name, nullid)
                     fp.write('%s %s\n' % (hex(old), m))
                 fp.write('%s %s\n' % (hex(node), m))
             fp.close()
 
         prevtags = ''
         if local:
             try:
                 fp = self.vfs('localtags', 'r+')
             except IOError:
                 fp = self.vfs('localtags', 'a')
             else:
                 prevtags = fp.read()
 
             # local tags are stored in the current charset
             writetags(fp, names, None, prevtags)
             for name in names:
                 self.hook('tag', node=hex(node), tag=name, local=local)
             return
 
         try:
             fp = self.wfile('.hgtags', 'rb+')
         except IOError, e:
             if e.errno != errno.ENOENT:
                 raise
             fp = self.wfile('.hgtags', 'ab')
         else:
             prevtags = fp.read()
 
         # committed tags are stored in UTF-8
         writetags(fp, names, encoding.fromlocal, prevtags)
 
         fp.close()
 
         self.invalidatecaches()
 
         if '.hgtags' not in self.dirstate:
             self[None].add(['.hgtags'])
 
         m = matchmod.exact(self.root, '', ['.hgtags'])
         tagnode = self.commit(message, user, date, extra=extra, match=m,
                               editor=editor)
 
         for name in names:
             self.hook('tag', node=hex(node), tag=name, local=local)
 
         return tagnode
 
     def tag(self, names, node, message, local, user, date, editor=False):
         '''tag a revision with one or more symbolic names.
 
         names is a list of strings or, when adding a single tag, names may be a
         string.
 
         if local is True, the tags are stored in a per-repository file.
         otherwise, they are stored in the .hgtags file, and a new
         changeset is committed with the change.
 
         keyword arguments:
 
         local: whether to store tags in non-version-controlled file
         (default False)
 
         message: commit message to use if committing
 
         user: name of user to use if committing
 
         date: date tuple to use if committing'''
 
         if not local:
             m = matchmod.exact(self.root, '', ['.hgtags'])
             if util.any(self.status(match=m, unknown=True, ignored=True)):
                 raise util.Abort(_('working copy of .hgtags is changed'),
                                  hint=_('please commit .hgtags manually'))
 
         self.tags() # instantiate the cache
         self._tag(names, node, message, local, user, date, editor=editor)
 
     @filteredpropertycache
     def _tagscache(self):
         '''Returns a tagscache object that contains various tags related
         caches.'''
 
         # This simplifies its cache management by having one decorated
         # function (this one) and the rest simply fetch things from it.
         class tagscache(object):
             def __init__(self):
                 # These two define the set of tags for this repository. tags
                 # maps tag name to node; tagtypes maps tag name to 'global' or
                 # 'local'. (Global tags are defined by .hgtags across all
                 # heads, and local tags are defined in .hg/localtags.)
                 # They constitute the in-memory cache of tags.
                 self.tags = self.tagtypes = None
 
                 self.nodetagscache = self.tagslist = None
 
         cache = tagscache()
         cache.tags, cache.tagtypes = self._findtags()
 
         return cache
 
     def tags(self):
         '''return a mapping of tag to node'''
         t = {}
         if self.changelog.filteredrevs:
             tags, tt = self._findtags()
         else:
             tags = self._tagscache.tags
         for k, v in tags.iteritems():
             try:
                 # ignore tags to unknown nodes
                 self.changelog.rev(v)
                 t[k] = v
             except (error.LookupError, ValueError):
                 pass
         return t
 
     def _findtags(self):
         '''Do the hard work of finding tags.  Return a pair of dicts
         (tags, tagtypes) where tags maps tag name to node, and tagtypes
         maps tag name to a string like \'global\' or \'local\'.
         Subclasses or extensions are free to add their own tags, but
         should be aware that the returned dicts will be retained for the
         duration of the localrepo object.'''
 
         # XXX what tagtype should subclasses/extensions use?  Currently
         # mq and bookmarks add tags, but do not set the tagtype at all.
         # Should each extension invent its own tag type?  Should there
         # be one tagtype for all such "virtual" tags?  Or is the status
         # quo fine?
 
         alltags = {}                    # map tag name to (node, hist)
         tagtypes = {}
 
         tagsmod.findglobaltags(self.ui, self, alltags, tagtypes)
         tagsmod.readlocaltags(self.ui, self, alltags, tagtypes)
 
         # Build the return dicts.  Have to re-encode tag names because
         # the tags module always uses UTF-8 (in order not to lose info
         # writing to the cache), but the rest of Mercurial wants them in
         # local encoding.
         tags = {}
         for (name, (node, hist)) in alltags.iteritems():
             if node != nullid:
                 tags[encoding.tolocal(name)] = node
         tags['tip'] = self.changelog.tip()
         tagtypes = dict([(encoding.tolocal(name), value)
                          for (name, value) in tagtypes.iteritems()])
         return (tags, tagtypes)
 
     def tagtype(self, tagname):
         '''
         return the type of the given tag. result can be:
 
         'local'  : a local tag
         'global' : a global tag
         None     : tag does not exist
         '''
 
         return self._tagscache.tagtypes.get(tagname)
 
     def tagslist(self):
         '''return a list of tags ordered by revision'''
         if not self._tagscache.tagslist:
             l = []
             for t, n in self.tags().iteritems():
                 l.append((self.changelog.rev(n), t, n))
             self._tagscache.tagslist = [(t, n) for r, t, n in sorted(l)]
 
         return self._tagscache.tagslist
 
     def nodetags(self, node):
         '''return the tags associated with a node'''
         if not self._tagscache.nodetagscache:
             nodetagscache = {}
             for t, n in self._tagscache.tags.iteritems():
                 nodetagscache.setdefault(n, []).append(t)
             for tags in nodetagscache.itervalues():
                 tags.sort()
             self._tagscache.nodetagscache = nodetagscache
         return self._tagscache.nodetagscache.get(node, [])
 
     def nodebookmarks(self, node):
         marks = []
         for bookmark, n in self._bookmarks.iteritems():
             if n == node:
                 marks.append(bookmark)
         return sorted(marks)
 
     def branchmap(self):
         '''returns a dictionary {branch: [branchheads]} with branchheads
         ordered by increasing revision number'''
         branchmap.updatecache(self)
         return self._branchcaches[self.filtername]
 
+    @unfilteredmethod
+    def revbranchcache(self):
+        if not self._revbranchcache:
+            self._revbranchcache = branchmap.revbranchcache(self.unfiltered())
+        return self._revbranchcache
+
     def branchtip(self, branch, ignoremissing=False):
         '''return the tip node for a given branch
 
         If ignoremissing is True, then this method will not raise an error.
         This is helpful for callers that only expect None for a missing branch
         (e.g. namespace).
 
         '''
         try:
             return self.branchmap().branchtip(branch)
         except KeyError:
             if not ignoremissing:
                 raise error.RepoLookupError(_("unknown branch '%s'") % branch)
             else:
                 pass
 
     def lookup(self, key):
         return self[key].node()
 
     def lookupbranch(self, key, remote=None):
         repo = remote or self
         if key in repo.branchmap():
             return key
 
         repo = (remote and remote.local()) and remote or self
         return repo[key].branch()
 
     def known(self, nodes):
         nm = self.changelog.nodemap
         pc = self._phasecache
         result = []
         for n in nodes:
             r = nm.get(n)
             resp = not (r is None or pc.phase(self, r) >= phases.secret)
             result.append(resp)
         return result
 
     def local(self):
         return self
 
     def cancopy(self):
         # so statichttprepo's override of local() works
         if not self.local():
             return False
         if not self.ui.configbool('phases', 'publish', True):
             return True
         # if publishing we can't copy if there is filtered content
         return not self.filtered('visible').changelog.filteredrevs
 
     def shared(self):
         '''the type of shared repository (None if not shared)'''
         if self.sharedpath != self.path:
             return 'store'
         return None
 
     def join(self, f, *insidef):
         return self.vfs.join(os.path.join(f, *insidef))
 
     def wjoin(self, f, *insidef):
         return self.vfs.reljoin(self.root, f, *insidef)
 
     def file(self, f):
         if f[0] == '/':
             f = f[1:]
         return filelog.filelog(self.svfs, f)
 
     def changectx(self, changeid):
         return self[changeid]
 
     def parents(self, changeid=None):
         '''get list of changectxs for parents of changeid'''
         return self[changeid].parents()
 
     def setparents(self, p1, p2=nullid):
         self.dirstate.beginparentchange()
         copies = self.dirstate.setparents(p1, p2)
         pctx = self[p1]
         if copies:
             # Adjust copy records, the dirstate cannot do it, it
             # requires access to parents manifests. Preserve them
             # only for entries added to first parent.
             for f in copies:
                 if f not in pctx and copies[f] in pctx:
                     self.dirstate.copy(copies[f], f)
         if p2 == nullid:
             for f, s in sorted(self.dirstate.copies().items()):
                 if f not in pctx and s not in pctx:
                     self.dirstate.copy(None, f)
         self.dirstate.endparentchange()
 
     def filectx(self, path, changeid=None, fileid=None):
         """changeid can be a changeset revision, node, or tag.
            fileid can be a file revision or node."""
         return context.filectx(self, path, changeid, fileid)
 
     def getcwd(self):
         return self.dirstate.getcwd()
 
     def pathto(self, f, cwd=None):
         return self.dirstate.pathto(f, cwd)
 
     def wfile(self, f, mode='r'):
         return self.wvfs(f, mode)
 
     def _link(self, f):
         return self.wvfs.islink(f)
 
     def _loadfilter(self, filter):
         if filter not in self.filterpats:
             l = []
             for pat, cmd in self.ui.configitems(filter):
                 if cmd == '!':
                     continue
                 mf = matchmod.match(self.root, '', [pat])
                 fn = None
                 params = cmd
                 for name, filterfn in self._datafilters.iteritems():
                     if cmd.startswith(name):
                         fn = filterfn
                         params = cmd[len(name):].lstrip()
                         break
                 if not fn:
                     fn = lambda s, c, **kwargs: util.filter(s, c)
                 # Wrap old filters not supporting keyword arguments
                 if not inspect.getargspec(fn)[2]:
                     oldfn = fn
                     fn = lambda s, c, **kwargs: oldfn(s, c)
                 l.append((mf, fn, params))
             self.filterpats[filter] = l
         return self.filterpats[filter]
 
     def _filter(self, filterpats, filename, data):
         for mf, fn, cmd in filterpats:
             if mf(filename):
                 self.ui.debug("filtering %s through %s\n" % (filename, cmd))
                 data = fn(data, cmd, ui=self.ui, repo=self, filename=filename)
                 break
 
         return data
 
     @unfilteredpropertycache
     def _encodefilterpats(self):
         return self._loadfilter('encode')
 
     @unfilteredpropertycache
     def _decodefilterpats(self):
         return self._loadfilter('decode')
 
     def adddatafilter(self, name, filter):
         self._datafilters[name] = filter
 
     def wread(self, filename):
         if self._link(filename):
             data = self.wvfs.readlink(filename)
         else:
             data = self.wvfs.read(filename)
         return self._filter(self._encodefilterpats, filename, data)
 
     def wwrite(self, filename, data, flags):
         data = self._filter(self._decodefilterpats, filename, data)
         if 'l' in flags:
             self.wvfs.symlink(data, filename)
         else:
             self.wvfs.write(filename, data)
             if 'x' in flags:
                 self.wvfs.setflags(filename, False, True)
 
     def wwritedata(self, filename, data):
         return self._filter(self._decodefilterpats, filename, data)
 
     def currenttransaction(self):
         """return the current transaction or None if non exists"""
         if self._transref:
             tr = self._transref()
         else:
             tr = None
 
         if tr and tr.running():
             return tr
         return None
 
     def transaction(self, desc, report=None):
         tr = self.currenttransaction()
         if tr is not None:
             return tr.nest()
 
         # abort here if the journal already exists
         if self.svfs.exists("journal"):
             raise error.RepoError(
                 _("abandoned transaction found"),
                 hint=_("run 'hg recover' to clean up transaction"))
 
         self.hook('pretxnopen', throw=True, txnname=desc)
 
         self._writejournal(desc)
         renames = [(vfs, x, undoname(x)) for vfs, x in self._journalfiles()]
         if report:
             rp = report
         else:
             rp = self.ui.warn
         vfsmap = {'plain': self.vfs} # root of .hg/
         # we must avoid cyclic reference between repo and transaction.
         reporef = weakref.ref(self)
         def validate(tr):
             """will run pre-closing hooks"""
             pending = lambda: tr.writepending() and self.root or ""
             reporef().hook('pretxnclose', throw=True, pending=pending,
                            xnname=desc)
 
         tr = transaction.transaction(rp, self.sopener, vfsmap,
                                      "journal",
                                      "undo",
                                      aftertrans(renames),
                                      self.store.createmode,
                                      validator=validate)
         # note: writing the fncache only during finalize mean that the file is
         # outdated when running hooks. As fncache is used for streaming clone,
         # this is not expected to break anything that happen during the hooks.
         tr.addfinalize('flush-fncache', self.store.write)
         def txnclosehook(tr2):
             """To be run if transaction is successful, will schedule a hook run
             """
             def hook():
                 reporef().hook('txnclose', throw=False, txnname=desc,
                                **tr2.hookargs)
             reporef()._afterlock(hook)
         tr.addfinalize('txnclose-hook', txnclosehook)
         self._transref = weakref.ref(tr)
         return tr
 
     def _journalfiles(self):
         return ((self.svfs, 'journal'),
                 (self.vfs, 'journal.dirstate'),
                 (self.vfs, 'journal.branch'),
                 (self.vfs, 'journal.desc'),
                 (self.vfs, 'journal.bookmarks'),
                 (self.svfs, 'journal.phaseroots'))
 
     def undofiles(self):
         return [(vfs, undoname(x)) for vfs, x in self._journalfiles()]
 
     def _writejournal(self, desc):
         self.vfs.write("journal.dirstate",
                           self.vfs.tryread("dirstate"))
         self.vfs.write("journal.branch",
                           encoding.fromlocal(self.dirstate.branch()))
         self.vfs.write("journal.desc",
                           "%d\n%s\n" % (len(self), desc))
         self.vfs.write("journal.bookmarks",
                           self.vfs.tryread("bookmarks"))
         self.svfs.write("journal.phaseroots",
                            self.svfs.tryread("phaseroots"))
 
     def recover(self):
         lock = self.lock()
         try:
             if self.svfs.exists("journal"):
                 self.ui.status(_("rolling back interrupted transaction\n"))
                 vfsmap = {'': self.svfs,
                           'plain': self.vfs,}
                 transaction.rollback(self.svfs, vfsmap, "journal",
                                      self.ui.warn)
                 self.invalidate()
                 return True
             else:
                 self.ui.warn(_("no interrupted transaction available\n"))
                 return False
         finally:
             lock.release()
 
     def rollback(self, dryrun=False, force=False):
         wlock = lock = None
         try:
             wlock = self.wlock()
             lock = self.lock()
             if self.svfs.exists("undo"):
                 return self._rollback(dryrun, force)
             else:
                 self.ui.warn(_("no rollback information available\n"))
                 return 1
         finally:
             release(lock, wlock)
 
     @unfilteredmethod # Until we get smarter cache management
     def _rollback(self, dryrun, force):
         ui = self.ui
         try:
             args = self.vfs.read('undo.desc').splitlines()
             (oldlen, desc, detail) = (int(args[0]), args[1], None)
             if len(args) >= 3:
                 detail = args[2]
             oldtip = oldlen - 1
 
             if detail and ui.verbose:
                 msg = (_('repository tip rolled back to revision %s'
                          ' (undo %s: %s)\n')
                        % (oldtip, desc, detail))
             else:
                 msg = (_('repository tip rolled back to revision %s'
                          ' (undo %s)\n')
                        % (oldtip, desc))
         except IOError:
             msg = _('rolling back unknown transaction\n')
             desc = None
 
         if not force and self['.'] != self['tip'] and desc == 'commit':
             raise util.Abort(
                 _('rollback of last commit while not checked out '
                   'may lose data'), hint=_('use -f to force'))
 
         ui.status(msg)
         if dryrun:
             return 0
 
         parents = self.dirstate.parents()
         self.destroying()
         vfsmap = {'plain': self.vfs, '': self.svfs}
         transaction.rollback(self.svfs, vfsmap, 'undo', ui.warn)
         if self.vfs.exists('undo.bookmarks'):
             self.vfs.rename('undo.bookmarks', 'bookmarks')
         if self.svfs.exists('undo.phaseroots'):
             self.svfs.rename('undo.phaseroots', 'phaseroots')
         self.invalidate()
 
         parentgone = (parents[0] not in self.changelog.nodemap or
                       parents[1] not in self.changelog.nodemap)
         if parentgone:
             self.vfs.rename('undo.dirstate', 'dirstate')
             try:
                 branch = self.vfs.read('undo.branch')
                 self.dirstate.setbranch(encoding.tolocal(branch))
             except IOError:
                 ui.warn(_('named branch could not be reset: '
                           'current branch is still \'%s\'\n')
                         % self.dirstate.branch())
 
             self.dirstate.invalidate()
             parents = tuple([p.rev() for p in self.parents()])
             if len(parents) > 1:
                 ui.status(_('working directory now based on '
                             'revisions %d and %d\n') % parents)
             else:
                 ui.status(_('working directory now based on '
                             'revision %d\n') % parents)
         # TODO: if we know which new heads may result from this rollback, pass
         # them to destroy(), which will prevent the branchhead cache from being
         # invalidated.
         self.destroyed()
         return 0
 
     def invalidatecaches(self):
 
         if '_tagscache' in vars(self):
             # can't use delattr on proxy
             del self.__dict__['_tagscache']
 
         self.unfiltered()._branchcaches.clear()
         self.invalidatevolatilesets()
 
     def invalidatevolatilesets(self):
         self.filteredrevcache.clear()
         obsolete.clearobscaches(self)
 
     def invalidatedirstate(self):
         '''Invalidates the dirstate, causing the next call to dirstate
         to check if it was modified since the last time it was read,
         rereading it if it has.
 
         This is different to dirstate.invalidate() that it doesn't always
         rereads the dirstate. Use dirstate.invalidate() if you want to
         explicitly read the dirstate again (i.e. restoring it to a previous
         known good state).'''
         if hasunfilteredcache(self, 'dirstate'):
             for k in self.dirstate._filecache:
                 try:
                     delattr(self.dirstate, k)
                 except AttributeError:
                     pass
             delattr(self.unfiltered(), 'dirstate')
 
     def invalidate(self):
         unfiltered = self.unfiltered() # all file caches are stored unfiltered
         for k in self._filecache:
             # dirstate is invalidated separately in invalidatedirstate()
             if k == 'dirstate':
                 continue
 
             try:
                 delattr(unfiltered, k)
             except AttributeError:
                 pass
         self.invalidatecaches()
         self.store.invalidatecaches()
 
     def invalidateall(self):
         '''Fully invalidates both store and non-store parts, causing the
         subsequent operation to reread any outside changes.'''
         # extension should hook this to invalidate its caches
         self.invalidate()
         self.invalidatedirstate()
 
     def _lock(self, vfs, lockname, wait, releasefn, acquirefn, desc):
         try:
             l = lockmod.lock(vfs, lockname, 0, releasefn, desc=desc)
         except error.LockHeld, inst:
             if not wait:
                 raise
             self.ui.warn(_("waiting for lock on %s held by %r\n") %
                          (desc, inst.locker))
             # default to 600 seconds timeout
             l = lockmod.lock(vfs, lockname,
                              int(self.ui.config("ui", "timeout", "600")),
                              releasefn, desc=desc)
             self.ui.warn(_("got lock after %s seconds\n") % l.delay)
         if acquirefn:
             acquirefn()
         return l
 
     def _afterlock(self, callback):
         """add a callback to the current repository lock.
 
         The callback will be executed on lock release."""
         l = self._lockref and self._lockref()
         if l:
             l.postrelease.append(callback)
         else:
             callback()
 
     def lock(self, wait=True):
         '''Lock the repository store (.hg/store) and return a weak reference
         to the lock. Use this before modifying the store (e.g. committing or
         stripping). If you are opening a transaction, get a lock as well.)'''
         l = self._lockref and self._lockref()
         if l is not None and l.held:
             l.lock()
             return l
 
         def unlock():
             for k, ce in self._filecache.items():
                 if k == 'dirstate' or k not in self.__dict__:
                     continue
                 ce.refresh()
 
         l = self._lock(self.svfs, "lock", wait, unlock,
                        self.invalidate, _('repository %s') % self.origroot)
         self._lockref = weakref.ref(l)
         return l
 
     def wlock(self, wait=True):
         '''Lock the non-store parts of the repository (everything under
         .hg except .hg/store) and return a weak reference to the lock.
         Use this before modifying files in .hg.'''
         l = self._wlockref and self._wlockref()
         if l is not None and l.held:
             l.lock()
             return l
 
         def unlock():
             if self.dirstate.pendingparentchange():
                 self.dirstate.invalidate()
             else:
                 self.dirstate.write()
 
             self._filecache['dirstate'].refresh()
 
         l = self._lock(self.vfs, "wlock", wait, unlock,
                        self.invalidatedirstate, _('working directory of %s') %
                        self.origroot)
         self._wlockref = weakref.ref(l)
         return l
 
     def _filecommit(self, fctx, manifest1, manifest2, linkrev, tr, changelist):
         """
         commit an individual file as part of a larger transaction
         """
 
         fname = fctx.path()
         text = fctx.data()
         flog = self.file(fname)
         fparent1 = manifest1.get(fname, nullid)
         fparent2 = manifest2.get(fname, nullid)
 
         meta = {}
         copy = fctx.renamed()
         if copy and copy[0] != fname:
             # Mark the new revision of this file as a copy of another
             # file.  This copy data will effectively act as a parent
             # of this new revision.  If this is a merge, the first
             # parent will be the nullid (meaning "look up the copy data")
             # and the second one will be the other parent.  For example:
             #
             # 0 --- 1 --- 3   rev1 changes file foo
             #   \       /     rev2 renames foo to bar and changes it
             #    \- 2 -/      rev3 should have bar with all changes and
             #                      should record that bar descends from
             #                      bar in rev2 and foo in rev1
             #
             # this allows this merge to succeed:
             #
             # 0 --- 1 --- 3   rev4 reverts the content change from rev2
             #   \       /     merging rev3 and rev4 should use bar@rev2
             #    \- 2 --- 4        as the merge base
             #
 
             cfname = copy[0]
             crev = manifest1.get(cfname)
             newfparent = fparent2
 
             if manifest2: # branch merge
                 if fparent2 == nullid or crev is None: # copied on remote side
                     if cfname in manifest2:
                         crev = manifest2[cfname]
                         newfparent = fparent1
 
             # Here, we used to search backwards through history to try to find
             # where the file copy came from if the source of a copy was not in
             # the parent directory. However, this doesn't actually make sense to
             # do (what does a copy from something not in your working copy even
             # mean?) and it causes bugs (eg, issue4476). Instead, we will warn
             # the user that copy information was dropped, so if they didn't
             # expect this outcome it can be fixed, but this is the correct
             # behavior in this circumstance.
 
             if crev:
                 self.ui.debug(" %s: copy %s:%s\n" % (fname, cfname, hex(crev)))
                 meta["copy"] = cfname
                 meta["copyrev"] = hex(crev)
                 fparent1, fparent2 = nullid, newfparent
             else:
                 self.ui.warn(_("warning: can't find ancestor for '%s' "
                                "copied from '%s'!\n") % (fname, cfname))
 
         elif fparent1 == nullid:
             fparent1, fparent2 = fparent2, nullid
         elif fparent2 != nullid:
             # is one parent an ancestor of the other?
             fparentancestors = flog.commonancestorsheads(fparent1, fparent2)
             if fparent1 in fparentancestors:
                 fparent1, fparent2 = fparent2, nullid
             elif fparent2 in fparentancestors:
                 fparent2 = nullid
 
         # is the file changed?
         if fparent2 != nullid or flog.cmp(fparent1, text) or meta:
             changelist.append(fname)
             return flog.add(text, meta, tr, linkrev, fparent1, fparent2)
         # are just the flags changed during merge?
         elif fname in manifest1 and manifest1.flags(fname) != fctx.flags():
             changelist.append(fname)
 
         return fparent1
 
     @unfilteredmethod
     def commit(self, text="", user=None, date=None, match=None, force=False,
                editor=False, extra={}):
         """Add a new revision to current repository.
 
         Revision information is gathered from the working directory,
         match can be used to filter the committed files. If editor is
         supplied, it is called to get a commit message.
         """
 
         def fail(f, msg):
             raise util.Abort('%s: %s' % (f, msg))
 
         if not match:
             match = matchmod.always(self.root, '')
 
         if not force:
             vdirs = []
             match.explicitdir = vdirs.append
             match.bad = fail
 
         wlock = self.wlock()
         try:
             wctx = self[None]
             merge = len(wctx.parents()) > 1
 
             if (not force and merge and match and
                 (match.files() or match.anypats())):
                 raise util.Abort(_('cannot partially commit a merge '
                                    '(do not specify files or patterns)'))
 
             status = self.status(match=match, clean=force)
             if force:
                 status.modified.extend(status.clean) # mq may commit clean files
 
             # check subrepos
             subs = []
             commitsubs = set()
             newstate = wctx.substate.copy()
             # only manage subrepos and .hgsubstate if .hgsub is present
             if '.hgsub' in wctx:
                 # we'll decide whether to track this ourselves, thanks
                 for c in status.modified, status.added, status.removed:
                     if '.hgsubstate' in c:
                         c.remove('.hgsubstate')
 
                 # compare current state to last committed state
                 # build new substate based on last committed state
                 oldstate = wctx.p1().substate
                 for s in sorted(newstate.keys()):
                     if not match(s):
                         # ignore working copy, use old state if present
                         if s in oldstate:
                             newstate[s] = oldstate[s]
                             continue
                         if not force:
                             raise util.Abort(
                                 _("commit with new subrepo %s excluded") % s)
                     if wctx.sub(s).dirty(True):
                         if not self.ui.configbool('ui', 'commitsubrepos'):
                             raise util.Abort(
                                 _("uncommitted changes in subrepo %s") % s,
                                 hint=_("use --subrepos for recursive commit"))
                         subs.append(s)
                         commitsubs.add(s)
                     else:
                         bs = wctx.sub(s).basestate()
                         newstate[s] = (newstate[s][0], bs, newstate[s][2])
                         if oldstate.get(s, (None, None, None))[1] != bs:
                             subs.append(s)
 
                 # check for removed subrepos
                 for p in wctx.parents():
                     r = [s for s in p.substate if s not in newstate]
                     subs += [s for s in r if match(s)]
                 if subs:
                     if (not match('.hgsub') and
                         '.hgsub' in (wctx.modified() + wctx.added())):
                         raise util.Abort(
                             _("can't commit subrepos without .hgsub"))
                     status.modified.insert(0, '.hgsubstate')
 
             elif '.hgsub' in status.removed:
                 # clean up .hgsubstate when .hgsub is removed
                 if ('.hgsubstate' in wctx and
                     '.hgsubstate' not in (status.modified + status.added +
                                           status.removed)):
                     status.removed.insert(0, '.hgsubstate')
 
             # make sure all explicit patterns are matched
             if not force and match.files():
                 matched = set(status.modified + status.added + status.removed)
 
                 for f in match.files():
                     f = self.dirstate.normalize(f)
                     if f == '.' or f in matched or f in wctx.substate:
                         continue
                     if f in status.deleted:
                         fail(f, _('file not found!'))
                     if f in vdirs: # visited directory
                         d = f + '/'
                         for mf in matched:
                             if mf.startswith(d):
                                 break
                         else:
                             fail(f, _("no match under directory!"))
                     elif f not in self.dirstate:
                         fail(f, _("file not tracked!"))
 
             cctx = context.workingcommitctx(self, status,
                                             text, user, date, extra)
 
             if (not force and not extra.get("close") and not merge
                 and not cctx.files()
                 and wctx.branch() == wctx.p1().branch()):
                 return None
 
             if merge and cctx.deleted():
                 raise util.Abort(_("cannot commit merge with missing files"))
 
             ms = mergemod.mergestate(self)
             for f in status.modified:
                 if f in ms and ms[f] == 'u':
                     raise util.Abort(_('unresolved merge conflicts '
                                        '(see "hg help resolve")'))
 
             if editor:
                 cctx._text = editor(self, cctx, subs)
             edited = (text != cctx._text)
 
             # Save commit message in case this transaction gets rolled back
             # (e.g. by a pretxncommit hook).  Leave the content alone on
             # the assumption that the user will use the same editor again.
             msgfn = self.savecommitmessage(cctx._text)
 
             # commit subs and write new state
             if subs:
                 for s in sorted(commitsubs):
                     sub = wctx.sub(s)
                     self.ui.status(_('committing subrepository %s\n') %
                         subrepo.subrelpath(sub))
                     sr = sub.commit(cctx._text, user, date)
                     newstate[s] = (newstate[s][0], sr)
                 subrepo.writestate(self, newstate)
 
             p1, p2 = self.dirstate.parents()
             hookp1, hookp2 = hex(p1), (p2 != nullid and hex(p2) or '')
             try:
                 self.hook("precommit", throw=True, parent1=hookp1,
                           parent2=hookp2)
                 ret = self.commitctx(cctx, True)
             except: # re-raises
                 if edited:
                     self.ui.write(
                         _('note: commit message saved in %s\n') % msgfn)
                 raise
 
             # update bookmarks, dirstate and mergestate
             bookmarks.update(self, [p1, p2], ret)
             cctx.markcommitted(ret)
             ms.reset()
         finally:
             wlock.release()
 
         def commithook(node=hex(ret), parent1=hookp1, parent2=hookp2):
             # hack for command that use a temporary commit (eg: histedit)
             # temporary commit got stripped before hook release
             if node in self:
                 self.hook("commit", node=node, parent1=parent1,
                           parent2=parent2)
         self._afterlock(commithook)
         return ret
 
     @unfilteredmethod
     def commitctx(self, ctx, error=False):
         """Add a new revision to current repository.
         Revision information is passed via the context argument.
         """
 
         tr = None
         p1, p2 = ctx.p1(), ctx.p2()
         user = ctx.user()
 
         lock = self.lock()
         try:
             tr = self.transaction("commit")
             trp = weakref.proxy(tr)
 
             if ctx.files():
                 m1 = p1.manifest()
                 m2 = p2.manifest()
                 m = m1.copy()
 
                 # check in files
                 added = []
                 changed = []
                 removed = list(ctx.removed())
                 linkrev = len(self)
                 self.ui.note(_("committing files:\n"))
                 for f in sorted(ctx.modified() + ctx.added()):
                     self.ui.note(f + "\n")
                     try:
                         fctx = ctx[f]
                         if fctx is None:
                             removed.append(f)
                         else:
                             added.append(f)
                             m[f] = self._filecommit(fctx, m1, m2, linkrev,
                                                     trp, changed)
                             m.setflag(f, fctx.flags())
                     except OSError, inst:
                         self.ui.warn(_("trouble committing %s!\n") % f)
                         raise
                     except IOError, inst:
                         errcode = getattr(inst, 'errno', errno.ENOENT)
                         if error or errcode and errcode != errno.ENOENT:
                             self.ui.warn(_("trouble committing %s!\n") % f)
                         raise
 
                 # update manifest
                 self.ui.note(_("committing manifest\n"))
                 removed = [f for f in sorted(removed) if f in m1 or f in m2]
                 drop = [f for f in removed if f in m]
                 for f in drop:
                     del m[f]
                 mn = self.manifest.add(m, trp, linkrev,
                                        p1.manifestnode(), p2.manifestnode(),
                                        added, drop)
                 files = changed + removed
             else:
                 mn = p1.manifestnode()
                 files = []
 
             # update changelog
             self.ui.note(_("committing changelog\n"))
             self.changelog.delayupdate(tr)
             n = self.changelog.add(mn, files, ctx.description(),
                                    trp, p1.node(), p2.node(),
                                    user, ctx.date(), ctx.extra().copy())
             p = lambda: tr.writepending() and self.root or ""
             xp1, xp2 = p1.hex(), p2 and p2.hex() or ''
             self.hook('pretxncommit', throw=True, node=hex(n), parent1=xp1,
                       parent2=xp2, pending=p)
             # set the new commit is proper phase
             targetphase = subrepo.newcommitphase(self.ui, ctx)
             if targetphase:
                 # retract boundary do not alter parent changeset.
                 # if a parent have higher the resulting phase will
                 # be compliant anyway
                 #
                 # if minimal phase was 0 we don't need to retract anything
                 phases.retractboundary(self, tr, targetphase, [n])
             tr.close()
             branchmap.updatecache(self.filtered('served'))
             return n
         finally:
             if tr:
                 tr.release()
             lock.release()
 
     @unfilteredmethod
     def destroying(self):
         '''Inform the repository that nodes are about to be destroyed.
         Intended for use by strip and rollback, so there's a common
         place for anything that has to be done before destroying history.
 
         This is mostly useful for saving state that is in memory and waiting
         to be flushed when the current lock is released. Because a call to
         destroyed is imminent, the repo will be invalidated causing those
         changes to stay in memory (waiting for the next unlock), or vanish
         completely.
         '''
         # When using the same lock to commit and strip, the phasecache is left
         # dirty after committing. Then when we strip, the repo is invalidated,
         # causing those changes to disappear.
         if '_phasecache' in vars(self):
             self._phasecache.write()
 
     @unfilteredmethod
     def destroyed(self):
         '''Inform the repository that nodes have been destroyed.
         Intended for use by strip and rollback, so there's a common
         place for anything that has to be done after destroying history.
         '''
         # When one tries to:
         # 1) destroy nodes thus calling this method (e.g. strip)
         # 2) use phasecache somewhere (e.g. commit)
         #
         # then 2) will fail because the phasecache contains nodes that were
         # removed. We can either remove phasecache from the filecache,
         # causing it to reload next time it is accessed, or simply filter
         # the removed nodes now and write the updated cache.
         self._phasecache.filterunknown(self)
         self._phasecache.write()
 
         # update the 'served' branch cache to help read only server process
         # Thanks to branchcache collaboration this is done from the nearest
         # filtered subset and it is expected to be fast.
         branchmap.updatecache(self.filtered('served'))
 
         # Ensure the persistent tag cache is updated.  Doing it now
         # means that the tag cache only has to worry about destroyed
         # heads immediately after a strip/rollback.  That in turn
         # guarantees that "cachetip == currenttip" (comparing both rev
         # and node) always means no nodes have been added or destroyed.
 
         # XXX this is suboptimal when qrefresh'ing: we strip the current
         # head, refresh the tag cache, then immediately add a new head.
         # But I think doing it this way is necessary for the "instant
         # tag cache retrieval" case to work.
         self.invalidate()
 
     def walk(self, match, node=None):
         '''
         walk recursively through the directory tree or a given
         changeset, finding all files matched by the match
         function
         '''
         return self[node].walk(match)
 
     def status(self, node1='.', node2=None, match=None,
                ignored=False, clean=False, unknown=False,
                listsubrepos=False):
         '''a convenience method that calls node1.status(node2)'''
         return self[node1].status(node2, match, ignored, clean, unknown,
                                   listsubrepos)
 
     def heads(self, start=None):
         heads = self.changelog.heads(start)
         # sort the output in rev descending order
         return sorted(heads, key=self.changelog.rev, reverse=True)
 
     def branchheads(self, branch=None, start=None, closed=False):
         '''return a (possibly filtered) list of heads for the given branch
 
         Heads are returned in topological order, from newest to oldest.
         If branch is None, use the dirstate branch.
         If start is not None, return only heads reachable from start.
         If closed is True, return heads that are marked as closed as well.
         '''
         if branch is None:
             branch = self[None].branch()
         branches = self.branchmap()
         if branch not in branches:
             return []
         # the cache returns heads ordered lowest to highest
         bheads = list(reversed(branches.branchheads(branch, closed=closed)))
         if start is not None:
             # filter out the heads that cannot be reached from startrev
             fbheads = set(self.changelog.nodesbetween([start], bheads)[2])
             bheads = [h for h in bheads if h in fbheads]
         return bheads
 
     def branches(self, nodes):
         if not nodes:
             nodes = [self.changelog.tip()]
         b = []
         for n in nodes:
             t = n
             while True:
                 p = self.changelog.parents(n)
                 if p[1] != nullid or p[0] == nullid:
                     b.append((t, n, p[0], p[1]))
                     break
                 n = p[0]
         return b
 
     def between(self, pairs):
         r = []
 
         for top, bottom in pairs:
             n, l, i = top, [], 0
             f = 1
 
             while n != bottom and n != nullid:
                 p = self.changelog.parents(n)[0]
                 if i == f:
                     l.append(n)
                     f = f * 2
                 n = p
                 i += 1
 
             r.append(l)
 
         return r
 
     def checkpush(self, pushop):
         """Extensions can override this function if additional checks have
         to be performed before pushing, or call it if they override push
         command.
         """
         pass
 
     @unfilteredpropertycache
     def prepushoutgoinghooks(self):
         """Return util.hooks consists of "(repo, remote, outgoing)"
         functions, which are called before pushing changesets.
         """
         return util.hooks()
 
     def stream_in(self, remote, requirements):
         lock = self.lock()
         try:
             # Save remote branchmap. We will use it later
             # to speed up branchcache creation
             rbranchmap = None
             if remote.capable("branchmap"):
                 rbranchmap = remote.branchmap()
 
             fp = remote.stream_out()
             l = fp.readline()
             try:
                 resp = int(l)
             except ValueError:
                 raise error.ResponseError(
                     _('unexpected response from remote server:'), l)
             if resp == 1:
                 raise util.Abort(_('operation forbidden by server'))
             elif resp == 2:
                 raise util.Abort(_('locking the remote repository failed'))
             elif resp != 0:
                 raise util.Abort(_('the server sent an unknown error code'))
             self.ui.status(_('streaming all changes\n'))
             l = fp.readline()
             try:
                 total_files, total_bytes = map(int, l.split(' ', 1))
             except (ValueError, TypeError):
                 raise error.ResponseError(
                     _('unexpected response from remote server:'), l)
             self.ui.status(_('%d files to transfer, %s of data\n') %
                            (total_files, util.bytecount(total_bytes)))
             handled_bytes = 0
             self.ui.progress(_('clone'), 0, total=total_bytes)
             start = time.time()
 
             tr = self.transaction(_('clone'))
             try:
                 for i in xrange(total_files):
                     # XXX doesn't support '\n' or '\r' in filenames
                     l = fp.readline()
                     try:
                         name, size = l.split('\0', 1)
                         size = int(size)
                     except (ValueError, TypeError):
                         raise error.ResponseError(
                             _('unexpected response from remote server:'), l)
                     if self.ui.debugflag:
                         self.ui.debug('adding %s (%s)\n' %
                                       (name, util.bytecount(size)))
                     # for backwards compat, name was partially encoded
                     ofp = self.svfs(store.decodedir(name), 'w')
                     for chunk in util.filechunkiter(fp, limit=size):
                         handled_bytes += len(chunk)
                         self.ui.progress(_('clone'), handled_bytes,
                                          total=total_bytes)
                         ofp.write(chunk)
                     ofp.close()
                 tr.close()
             finally:
                 tr.release()
 
             # Writing straight to files circumvented the inmemory caches
             self.invalidate()
 
             elapsed = time.time() - start
             if elapsed <= 0:
                 elapsed = 0.001
             self.ui.progress(_('clone'), None)
             self.ui.status(_('transferred %s in %.1f seconds (%s/sec)\n') %
                            (util.bytecount(total_bytes), elapsed,
                             util.bytecount(total_bytes / elapsed)))
 
             # new requirements = old non-format requirements +
             #                    new format-related
             # requirements from the streamed-in repository
             requirements.update(set(self.requirements) - self.supportedformats)
             self._applyrequirements(requirements)
             self._writerequirements()
 
             if rbranchmap:
                 rbheads = []
                 closed = []
                 for bheads in rbranchmap.itervalues():
                     rbheads.extend(bheads)
                     for h in bheads:
                         r = self.changelog.rev(h)
                         b, c = self.changelog.branchinfo(r)
                         if c:
                             closed.append(h)
 
                 if rbheads:
                     rtiprev = max((int(self.changelog.rev(node))
                             for node in rbheads))
                     cache = branchmap.branchcache(rbranchmap,
                                                   self[rtiprev].node(),
                                                   rtiprev,
                                                   closednodes=closed)
                     # Try to stick it as low as possible
                     # filter above served are unlikely to be fetch from a clone
                     for candidate in ('base', 'immutable', 'served'):
                         rview = self.filtered(candidate)
                         if cache.validfor(rview):
                             self._branchcaches[candidate] = cache
                             cache.write(rview)
                             break
             self.invalidate()
             return len(self.heads()) + 1
         finally:
             lock.release()
 
     def clone(self, remote, heads=[], stream=None):
         '''clone remote repository.
 
         keyword arguments:
         heads: list of revs to clone (forces use of pull)
         stream: use streaming clone if possible'''
 
         # now, all clients that can request uncompressed clones can
         # read repo formats supported by all servers that can serve
         # them.
 
         # if revlog format changes, client will have to check version
         # and format flags on "stream" capability, and use
         # uncompressed only if compatible.
 
         if stream is None:
             # if the server explicitly prefers to stream (for fast LANs)
             stream = remote.capable('stream-preferred')
 
         if stream and not heads:
             # 'stream' means remote revlog format is revlogv1 only
             if remote.capable('stream'):
                 self.stream_in(remote, set(('revlogv1',)))
             else:
                 # otherwise, 'streamreqs' contains the remote revlog format
                 streamreqs = remote.capable('streamreqs')
                 if streamreqs:
                     streamreqs = set(streamreqs.split(','))
                     # if we support it, stream in and adjust our requirements
                     if not streamreqs - self.supportedformats:
                         self.stream_in(remote, streamreqs)
 
         quiet = self.ui.backupconfig('ui', 'quietbookmarkmove')
         try:
             self.ui.setconfig('ui', 'quietbookmarkmove', True, 'clone')
             ret = exchange.pull(self, remote, heads).cgresult
         finally:
             self.ui.restoreconfig(quiet)
         return ret
 
     def pushkey(self, namespace, key, old, new):
         try:
             self.hook('prepushkey', throw=True, namespace=namespace, key=key,
                       old=old, new=new)
         except error.HookAbort, exc:
             self.ui.write_err(_("pushkey-abort: %s\n") % exc)
             if exc.hint:
                 self.ui.write_err(_("(%s)\n") % exc.hint)
             return False
         self.ui.debug('pushing key for "%s:%s"\n' % (namespace, key))
         ret = pushkey.push(self, namespace, key, old, new)
         def runhook():
             self.hook('pushkey', namespace=namespace, key=key, old=old, new=new,
                       ret=ret)
         self._afterlock(runhook)
         return ret
 
     def listkeys(self, namespace):
         self.hook('prelistkeys', throw=True, namespace=namespace)
         self.ui.debug('listing keys for "%s"\n' % namespace)
         values = pushkey.list(self, namespace)
         self.hook('listkeys', namespace=namespace, values=values)
         return values
 
     def debugwireargs(self, one, two, three=None, four=None, five=None):
         '''used to test argument passing over the wire'''
         return "%s %s %s %s %s" % (one, two, three, four, five)
 
     def savecommitmessage(self, text):
         fp = self.vfs('last-message.txt', 'wb')
         try:
             fp.write(text)
         finally:
             fp.close()
         return self.pathto(fp.name[len(self.root) + 1:])
 
 # used to avoid circular references so destructors work
 def aftertrans(files):
     renamefiles = [tuple(t) for t in files]
     def a():
         for vfs, src, dest in renamefiles:
             try:
                 vfs.rename(src, dest)
             except OSError: # journal file does not yet exist
                 pass
     return a
 
 def undoname(fn):
     base, name = os.path.split(fn)
     assert name.startswith('journal')
     return os.path.join(base, name.replace('journal', 'undo', 1))
 
 def instance(ui, path, create):
     return localrepository(ui, util.urllocalpath(path), create)
 
 def islocal(path):
     return True

mercurial/statichttprepo.py

@@ -1,166 +1,167 b''
 # statichttprepo.py - simple http repository class for mercurial
 #
 # This provides read-only repo access to repositories exported via static http
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from i18n import _
 import changelog, byterange, url, error, namespaces
 import localrepo, manifest, util, scmutil, store
 import urllib, urllib2, errno, os
 
 class httprangereader(object):
     def __init__(self, url, opener):
         # we assume opener has HTTPRangeHandler
         self.url = url
         self.pos = 0
         self.opener = opener
         self.name = url
     def seek(self, pos):
         self.pos = pos
     def read(self, bytes=None):
         req = urllib2.Request(self.url)
         end = ''
         if bytes:
             end = self.pos + bytes - 1
         if self.pos or end:
             req.add_header('Range', 'bytes=%d-%s' % (self.pos, end))
 
         try:
             f = self.opener.open(req)
             data = f.read()
             # Python 2.6+ defines a getcode() function, and 2.4 and
             # 2.5 appear to always have an undocumented code attribute
             # set. If we can't read either of those, fall back to 206
             # and hope for the best.
             code = getattr(f, 'getcode', lambda : getattr(f, 'code', 206))()
         except urllib2.HTTPError, inst:
             num = inst.code == 404 and errno.ENOENT or None
             raise IOError(num, inst)
         except urllib2.URLError, inst:
             raise IOError(None, inst.reason[1])
 
         if code == 200:
             # HTTPRangeHandler does nothing if remote does not support
             # Range headers and returns the full entity. Let's slice it.
             if bytes:
                 data = data[self.pos:self.pos + bytes]
             else:
                 data = data[self.pos:]
         elif bytes:
             data = data[:bytes]
         self.pos += len(data)
         return data
     def readlines(self):
         return self.read().splitlines(True)
     def __iter__(self):
         return iter(self.readlines())
     def close(self):
         pass
 
 def build_opener(ui, authinfo):
     # urllib cannot handle URLs with embedded user or passwd
     urlopener = url.opener(ui, authinfo)
     urlopener.add_handler(byterange.HTTPRangeHandler())
 
     class statichttpvfs(scmutil.abstractvfs):
         def __init__(self, base):
             self.base = base
 
         def __call__(self, path, mode='r', *args, **kw):
             if mode not in ('r', 'rb'):
                 raise IOError('Permission denied')
             f = "/".join((self.base, urllib.quote(path)))
             return httprangereader(f, urlopener)
 
         def join(self, path):
             if path:
                 return os.path.join(self.base, path)
             else:
                 return self.base
 
     return statichttpvfs
 
 class statichttppeer(localrepo.localpeer):
     def local(self):
         return None
     def canpush(self):
         return False
 
 class statichttprepository(localrepo.localrepository):
     supported = localrepo.localrepository._basesupported
 
     def __init__(self, ui, path):
         self._url = path
         self.ui = ui
 
         self.root = path
         u = util.url(path.rstrip('/') + "/.hg")
         self.path, authinfo = u.authinfo()
 
         opener = build_opener(ui, authinfo)
         self.opener = opener(self.path)
         self.vfs = self.opener
         self._phasedefaults = []
 
         self.names = namespaces.namespaces()
 
         try:
             requirements = scmutil.readrequires(self.vfs, self.supported)
         except IOError, inst:
             if inst.errno != errno.ENOENT:
                 raise
             requirements = set()
 
             # check if it is a non-empty old-style repository
             try:
                 fp = self.vfs("00changelog.i")
                 fp.read(1)
                 fp.close()
             except IOError, inst:
                 if inst.errno != errno.ENOENT:
                     raise
                 # we do not care about empty old-style repositories here
                 msg = _("'%s' does not appear to be an hg repository") % path
                 raise error.RepoError(msg)
 
         # setup store
         self.store = store.store(requirements, self.path, opener)
         self.spath = self.store.path
         self.svfs = self.store.opener
         self.sopener = self.svfs
         self.sjoin = self.store.join
         self._filecache = {}
         self.requirements = requirements
 
         self.manifest = manifest.manifest(self.svfs)
         self.changelog = changelog.changelog(self.svfs)
         self._tags = None
         self.nodetagscache = None
         self._branchcaches = {}
+        self._revbranchcache = None
         self.encodepats = None
         self.decodepats = None
 
     def _restrictcapabilities(self, caps):
         caps = super(statichttprepository, self)._restrictcapabilities(caps)
         return caps.difference(["pushkey"])
 
     def url(self):
         return self._url
 
     def local(self):
         return False
 
     def peer(self):
         return statichttppeer(self)
 
     def lock(self, wait=True):
         raise util.Abort(_('cannot lock static-http repository'))
 
 def instance(ui, path, create):
     if create:
         raise util.Abort(_('cannot create new static-http repository'))
     return statichttprepository(ui, path[7:])