bundle2: separate bundle10 and bundle2 cases in getbundle()

The primary goal is to make it easier for extensions to alter how bundle2
parts are laid out. They now can use the getbundle2partsgenerator decorator
to add new parts, or directly act on getbundle2partsmapping to wrap existing
part functions.

Note the 'request for bundle10 must include changegroup' error was kept
under the same conditions as before, although the logic changes don't make
it obvious.

mercurial/exchange.py

@@ -1,1078 +1,1120 b''
 # exchange.py - utility to exchange data between repos.
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from i18n import _
 from node import hex, nullid
 import errno, urllib
 import util, scmutil, changegroup, base85, error
 import discovery, phases, obsolete, bookmarks, bundle2, pushkey
 
 def readbundle(ui, fh, fname, vfs=None):
     header = changegroup.readexactly(fh, 4)
 
     alg = None
     if not fname:
         fname = "stream"
         if not header.startswith('HG') and header.startswith('\0'):
             fh = changegroup.headerlessfixup(fh, header)
             header = "HG10"
             alg = 'UN'
     elif vfs:
         fname = vfs.join(fname)
 
     magic, version = header[0:2], header[2:4]
 
     if magic != 'HG':
         raise util.Abort(_('%s: not a Mercurial bundle') % fname)
     if version == '10':
         if alg is None:
             alg = changegroup.readexactly(fh, 2)
         return changegroup.cg1unpacker(fh, alg)
     elif version == '2X':
         return bundle2.unbundle20(ui, fh, header=magic + version)
     else:
         raise util.Abort(_('%s: unknown bundle version %s') % (fname, version))
 
 def buildobsmarkerspart(bundler, markers):
     """add an obsmarker part to the bundler with <markers>
 
     No part is created if markers is empty.
     Raises ValueError if the bundler doesn't support any known obsmarker format.
     """
     if markers:
         remoteversions = bundle2.obsmarkersversion(bundler.capabilities)
         version = obsolete.commonversion(remoteversions)
         if version is None:
             raise ValueError('bundler do not support common obsmarker format')
         stream = obsolete.encodemarkers(markers, True, version=version)
         return bundler.newpart('B2X:OBSMARKERS', data=stream)
     return None
 
 class pushoperation(object):
     """A object that represent a single push operation
 
     It purpose is to carry push related state and very common operation.
 
     A new should be created at the beginning of each push and discarded
     afterward.
     """
 
     def __init__(self, repo, remote, force=False, revs=None, newbranch=False):
         # repo we push from
         self.repo = repo
         self.ui = repo.ui
         # repo we push to
         self.remote = remote
         # force option provided
         self.force = force
         # revs to be pushed (None is "all")
         self.revs = revs
         # allow push of new branch
         self.newbranch = newbranch
         # did a local lock get acquired?
         self.locallocked = None
         # step already performed
         # (used to check what steps have been already performed through bundle2)
         self.stepsdone = set()
         # Integer version of the push result
         # - None means nothing to push
         # - 0 means HTTP error
         # - 1 means we pushed and remote head count is unchanged *or*
         #   we have outgoing changesets but refused to push
         # - other values as described by addchangegroup()
         self.ret = None
         # discover.outgoing object (contains common and outgoing data)
         self.outgoing = None
         # all remote heads before the push
         self.remoteheads = None
         # testable as a boolean indicating if any nodes are missing locally.
         self.incoming = None
         # phases changes that must be pushed along side the changesets
         self.outdatedphases = None
         # phases changes that must be pushed if changeset push fails
         self.fallbackoutdatedphases = None
         # outgoing obsmarkers
         self.outobsmarkers = set()
         # outgoing bookmarks
         self.outbookmarks = []
 
     @util.propertycache
     def futureheads(self):
         """future remote heads if the changeset push succeeds"""
         return self.outgoing.missingheads
 
     @util.propertycache
     def fallbackheads(self):
         """future remote heads if the changeset push fails"""
         if self.revs is None:
             # not target to push, all common are relevant
             return self.outgoing.commonheads
         unfi = self.repo.unfiltered()
         # I want cheads = heads(::missingheads and ::commonheads)
         # (missingheads is revs with secret changeset filtered out)
         #
         # This can be expressed as:
         #     cheads = ( (missingheads and ::commonheads)
         #              + (commonheads and ::missingheads))"
         #              )
         #
         # while trying to push we already computed the following:
         #     common = (::commonheads)
         #     missing = ((commonheads::missingheads) - commonheads)
         #
         # We can pick:
         # * missingheads part of common (::commonheads)
         common = set(self.outgoing.common)
         nm = self.repo.changelog.nodemap
         cheads = [node for node in self.revs if nm[node] in common]
         # and
         # * commonheads parents on missing
         revset = unfi.set('%ln and parents(roots(%ln))',
                          self.outgoing.commonheads,
                          self.outgoing.missing)
         cheads.extend(c.node() for c in revset)
         return cheads
 
     @property
     def commonheads(self):
         """set of all common heads after changeset bundle push"""
         if self.ret:
             return self.futureheads
         else:
             return self.fallbackheads
 
 def push(repo, remote, force=False, revs=None, newbranch=False):
     '''Push outgoing changesets (limited by revs) from a local
     repository to remote. Return an integer:
       - None means nothing to push
       - 0 means HTTP error
       - 1 means we pushed and remote head count is unchanged *or*
         we have outgoing changesets but refused to push
       - other values as described by addchangegroup()
     '''
     pushop = pushoperation(repo, remote, force, revs, newbranch)
     if pushop.remote.local():
         missing = (set(pushop.repo.requirements)
                    - pushop.remote.local().supported)
         if missing:
             msg = _("required features are not"
                     " supported in the destination:"
                     " %s") % (', '.join(sorted(missing)))
             raise util.Abort(msg)
 
     # there are two ways to push to remote repo:
     #
     # addchangegroup assumes local user can lock remote
     # repo (local filesystem, old ssh servers).
     #
     # unbundle assumes local user cannot lock remote repo (new ssh
     # servers, http servers).
 
     if not pushop.remote.canpush():
         raise util.Abort(_("destination does not support push"))
     # get local lock as we might write phase data
     locallock = None
     try:
         locallock = pushop.repo.lock()
         pushop.locallocked = True
     except IOError, err:
         pushop.locallocked = False
         if err.errno != errno.EACCES:
             raise
         # source repo cannot be locked.
         # We do not abort the push, but just disable the local phase
         # synchronisation.
         msg = 'cannot lock source repository: %s\n' % err
         pushop.ui.debug(msg)
     try:
         pushop.repo.checkpush(pushop)
         lock = None
         unbundle = pushop.remote.capable('unbundle')
         if not unbundle:
             lock = pushop.remote.lock()
         try:
             _pushdiscovery(pushop)
             if (pushop.repo.ui.configbool('experimental', 'bundle2-exp',
                                           False)
                 and pushop.remote.capable('bundle2-exp')):
                 _pushbundle2(pushop)
             _pushchangeset(pushop)
             _pushsyncphase(pushop)
             _pushobsolete(pushop)
             _pushbookmark(pushop)
         finally:
             if lock is not None:
                 lock.release()
     finally:
         if locallock is not None:
             locallock.release()
 
     return pushop.ret
 
 # list of steps to perform discovery before push
 pushdiscoveryorder = []
 
 # Mapping between step name and function
 #
 # This exists to help extensions wrap steps if necessary
 pushdiscoverymapping = {}
 
 def pushdiscovery(stepname):
     """decorator for function performing discovery before push
 
     The function is added to the step -> function mapping and appended to the
     list of steps.  Beware that decorated function will be added in order (this
     may matter).
 
     You can only use this decorator for a new step, if you want to wrap a step
     from an extension, change the pushdiscovery dictionary directly."""
     def dec(func):
         assert stepname not in pushdiscoverymapping
         pushdiscoverymapping[stepname] = func
         pushdiscoveryorder.append(stepname)
         return func
     return dec
 
 def _pushdiscovery(pushop):
     """Run all discovery steps"""
     for stepname in pushdiscoveryorder:
         step = pushdiscoverymapping[stepname]
         step(pushop)
 
 @pushdiscovery('changeset')
 def _pushdiscoverychangeset(pushop):
     """discover the changeset that need to be pushed"""
     unfi = pushop.repo.unfiltered()
     fci = discovery.findcommonincoming
     commoninc = fci(unfi, pushop.remote, force=pushop.force)
     common, inc, remoteheads = commoninc
     fco = discovery.findcommonoutgoing
     outgoing = fco(unfi, pushop.remote, onlyheads=pushop.revs,
                    commoninc=commoninc, force=pushop.force)
     pushop.outgoing = outgoing
     pushop.remoteheads = remoteheads
     pushop.incoming = inc
 
 @pushdiscovery('phase')
 def _pushdiscoveryphase(pushop):
     """discover the phase that needs to be pushed
 
     (computed for both success and failure case for changesets push)"""
     outgoing = pushop.outgoing
     unfi = pushop.repo.unfiltered()
     remotephases = pushop.remote.listkeys('phases')
     publishing = remotephases.get('publishing', False)
     ana = phases.analyzeremotephases(pushop.repo,
                                      pushop.fallbackheads,
                                      remotephases)
     pheads, droots = ana
     extracond = ''
     if not publishing:
         extracond = ' and public()'
     revset = 'heads((%%ln::%%ln) %s)' % extracond
     # Get the list of all revs draft on remote by public here.
     # XXX Beware that revset break if droots is not strictly
     # XXX root we may want to ensure it is but it is costly
     fallback = list(unfi.set(revset, droots, pushop.fallbackheads))
     if not outgoing.missing:
         future = fallback
     else:
         # adds changeset we are going to push as draft
         #
         # should not be necessary for pushblishing server, but because of an
         # issue fixed in xxxxx we have to do it anyway.
         fdroots = list(unfi.set('roots(%ln  + %ln::)',
                        outgoing.missing, droots))
         fdroots = [f.node() for f in fdroots]
         future = list(unfi.set(revset, fdroots, pushop.futureheads))
     pushop.outdatedphases = future
     pushop.fallbackoutdatedphases = fallback
 
 @pushdiscovery('obsmarker')
 def _pushdiscoveryobsmarkers(pushop):
     if (obsolete._enabled
         and pushop.repo.obsstore
         and 'obsolete' in pushop.remote.listkeys('namespaces')):
         repo = pushop.repo
         # very naive computation, that can be quite expensive on big repo.
         # However: evolution is currently slow on them anyway.
         nodes = (c.node() for c in repo.set('::%ln', pushop.futureheads))
         pushop.outobsmarkers = pushop.repo.obsstore.relevantmarkers(nodes)
 
 @pushdiscovery('bookmarks')
 def _pushdiscoverybookmarks(pushop):
     ui = pushop.ui
     repo = pushop.repo.unfiltered()
     remote = pushop.remote
     ui.debug("checking for updated bookmarks\n")
     ancestors = ()
     if pushop.revs:
         revnums = map(repo.changelog.rev, pushop.revs)
         ancestors = repo.changelog.ancestors(revnums, inclusive=True)
     remotebookmark = remote.listkeys('bookmarks')
 
     comp = bookmarks.compare(repo, repo._bookmarks, remotebookmark, srchex=hex)
     addsrc, adddst, advsrc, advdst, diverge, differ, invalid = comp
     for b, scid, dcid in advsrc:
         if not ancestors or repo[scid].rev() in ancestors:
             pushop.outbookmarks.append((b, dcid, scid))
 
 def _pushcheckoutgoing(pushop):
     outgoing = pushop.outgoing
     unfi = pushop.repo.unfiltered()
     if not outgoing.missing:
         # nothing to push
         scmutil.nochangesfound(unfi.ui, unfi, outgoing.excluded)
         return False
     # something to push
     if not pushop.force:
         # if repo.obsstore == False --> no obsolete
         # then, save the iteration
         if unfi.obsstore:
             # this message are here for 80 char limit reason
             mso = _("push includes obsolete changeset: %s!")
             mst = "push includes %s changeset: %s!"
             # plain versions for i18n tool to detect them
             _("push includes unstable changeset: %s!")
             _("push includes bumped changeset: %s!")
             _("push includes divergent changeset: %s!")
             # If we are to push if there is at least one
             # obsolete or unstable changeset in missing, at
             # least one of the missinghead will be obsolete or
             # unstable. So checking heads only is ok
             for node in outgoing.missingheads:
                 ctx = unfi[node]
                 if ctx.obsolete():
                     raise util.Abort(mso % ctx)
                 elif ctx.troubled():
                     raise util.Abort(_(mst)
                                      % (ctx.troubles()[0],
                                         ctx))
         newbm = pushop.ui.configlist('bookmarks', 'pushing')
         discovery.checkheads(unfi, pushop.remote, outgoing,
                              pushop.remoteheads,
                              pushop.newbranch,
                              bool(pushop.incoming),
                              newbm)
     return True
 
 # List of names of steps to perform for an outgoing bundle2, order matters.
 b2partsgenorder = []
 
 # Mapping between step name and function
 #
 # This exists to help extensions wrap steps if necessary
 b2partsgenmapping = {}
 
 def b2partsgenerator(stepname):
     """decorator for function generating bundle2 part
 
     The function is added to the step -> function mapping and appended to the
     list of steps.  Beware that decorated functions will be added in order
     (this may matter).
 
     You can only use this decorator for new steps, if you want to wrap a step
     from an extension, attack the b2partsgenmapping dictionary directly."""
     def dec(func):
         assert stepname not in b2partsgenmapping
         b2partsgenmapping[stepname] = func
         b2partsgenorder.append(stepname)
         return func
     return dec
 
 @b2partsgenerator('changeset')
 def _pushb2ctx(pushop, bundler):
     """handle changegroup push through bundle2
 
     addchangegroup result is stored in the ``pushop.ret`` attribute.
     """
     if 'changesets' in pushop.stepsdone:
         return
     pushop.stepsdone.add('changesets')
     # Send known heads to the server for race detection.
     if not _pushcheckoutgoing(pushop):
         return
     pushop.repo.prepushoutgoinghooks(pushop.repo,
                                      pushop.remote,
                                      pushop.outgoing)
     if not pushop.force:
         bundler.newpart('B2X:CHECK:HEADS', data=iter(pushop.remoteheads))
     cg = changegroup.getlocalchangegroup(pushop.repo, 'push', pushop.outgoing)
     cgpart = bundler.newpart('B2X:CHANGEGROUP', data=cg.getchunks())
     def handlereply(op):
         """extract addchangroup returns from server reply"""
         cgreplies = op.records.getreplies(cgpart.id)
         assert len(cgreplies['changegroup']) == 1
         pushop.ret = cgreplies['changegroup'][0]['return']
     return handlereply
 
 @b2partsgenerator('phase')
 def _pushb2phases(pushop, bundler):
     """handle phase push through bundle2"""
     if 'phases' in pushop.stepsdone:
         return
     b2caps = bundle2.bundle2caps(pushop.remote)
     if not 'b2x:pushkey' in b2caps:
         return
     pushop.stepsdone.add('phases')
     part2node = []
     enc = pushkey.encode
     for newremotehead in pushop.outdatedphases:
         part = bundler.newpart('b2x:pushkey')
         part.addparam('namespace', enc('phases'))
         part.addparam('key', enc(newremotehead.hex()))
         part.addparam('old', enc(str(phases.draft)))
         part.addparam('new', enc(str(phases.public)))
         part2node.append((part.id, newremotehead))
     def handlereply(op):
         for partid, node in part2node:
             partrep = op.records.getreplies(partid)
             results = partrep['pushkey']
             assert len(results) <= 1
             msg = None
             if not results:
                 msg = _('server ignored update of %s to public!\n') % node
             elif not int(results[0]['return']):
                 msg = _('updating %s to public failed!\n') % node
             if msg is not None:
                 pushop.ui.warn(msg)
     return handlereply
 
 @b2partsgenerator('obsmarkers')
 def _pushb2obsmarkers(pushop, bundler):
     if 'obsmarkers' in pushop.stepsdone:
         return
     remoteversions = bundle2.obsmarkersversion(bundler.capabilities)
     if obsolete.commonversion(remoteversions) is None:
         return
     pushop.stepsdone.add('obsmarkers')
     if pushop.outobsmarkers:
         buildobsmarkerspart(bundler, pushop.outobsmarkers)
 
 @b2partsgenerator('bookmarks')
 def _pushb2bookmarks(pushop, bundler):
     """handle phase push through bundle2"""
     if 'bookmarks' in pushop.stepsdone:
         return
     b2caps = bundle2.bundle2caps(pushop.remote)
     if 'b2x:pushkey' not in b2caps:
         return
     pushop.stepsdone.add('bookmarks')
     part2book = []
     enc = pushkey.encode
     for book, old, new in pushop.outbookmarks:
         part = bundler.newpart('b2x:pushkey')
         part.addparam('namespace', enc('bookmarks'))
         part.addparam('key', enc(book))
         part.addparam('old', enc(old))
         part.addparam('new', enc(new))
         part2book.append((part.id, book))
     def handlereply(op):
         for partid, book in part2book:
             partrep = op.records.getreplies(partid)
             results = partrep['pushkey']
             assert len(results) <= 1
             if not results:
                 pushop.ui.warn(_('server ignored bookmark %s update\n') % book)
             else:
                 ret = int(results[0]['return'])
                 if ret:
                     pushop.ui.status(_("updating bookmark %s\n") % book)
                 else:
                     pushop.ui.warn(_('updating bookmark %s failed!\n') % book)
     return handlereply
 
 
 def _pushbundle2(pushop):
     """push data to the remote using bundle2
 
     The only currently supported type of data is changegroup but this will
     evolve in the future."""
     bundler = bundle2.bundle20(pushop.ui, bundle2.bundle2caps(pushop.remote))
     # create reply capability
     capsblob = bundle2.encodecaps(bundle2.getrepocaps(pushop.repo))
     bundler.newpart('b2x:replycaps', data=capsblob)
     replyhandlers = []
     for partgenname in b2partsgenorder:
         partgen = b2partsgenmapping[partgenname]
         ret = partgen(pushop, bundler)
         if callable(ret):
             replyhandlers.append(ret)
     # do not push if nothing to push
     if bundler.nbparts <= 1:
         return
     stream = util.chunkbuffer(bundler.getchunks())
     try:
         reply = pushop.remote.unbundle(stream, ['force'], 'push')
     except error.BundleValueError, exc:
         raise util.Abort('missing support for %s' % exc)
     try:
         op = bundle2.processbundle(pushop.repo, reply)
     except error.BundleValueError, exc:
         raise util.Abort('missing support for %s' % exc)
     for rephand in replyhandlers:
         rephand(op)
 
 def _pushchangeset(pushop):
     """Make the actual push of changeset bundle to remote repo"""
     if 'changesets' in pushop.stepsdone:
         return
     pushop.stepsdone.add('changesets')
     if not _pushcheckoutgoing(pushop):
         return
     pushop.repo.prepushoutgoinghooks(pushop.repo,
                                      pushop.remote,
                                      pushop.outgoing)
     outgoing = pushop.outgoing
     unbundle = pushop.remote.capable('unbundle')
     # TODO: get bundlecaps from remote
     bundlecaps = None
     # create a changegroup from local
     if pushop.revs is None and not (outgoing.excluded
                             or pushop.repo.changelog.filteredrevs):
         # push everything,
         # use the fast path, no race possible on push
         bundler = changegroup.cg1packer(pushop.repo, bundlecaps)
         cg = changegroup.getsubset(pushop.repo,
                                    outgoing,
                                    bundler,
                                    'push',
                                    fastpath=True)
     else:
         cg = changegroup.getlocalchangegroup(pushop.repo, 'push', outgoing,
                                         bundlecaps)
 
     # apply changegroup to remote
     if unbundle:
         # local repo finds heads on server, finds out what
         # revs it must push. once revs transferred, if server
         # finds it has different heads (someone else won
         # commit/push race), server aborts.
         if pushop.force:
             remoteheads = ['force']
         else:
             remoteheads = pushop.remoteheads
         # ssh: return remote's addchangegroup()
         # http: return remote's addchangegroup() or 0 for error
         pushop.ret = pushop.remote.unbundle(cg, remoteheads,
                                             pushop.repo.url())
     else:
         # we return an integer indicating remote head count
         # change
         pushop.ret = pushop.remote.addchangegroup(cg, 'push', pushop.repo.url())
 
 def _pushsyncphase(pushop):
     """synchronise phase information locally and remotely"""
     cheads = pushop.commonheads
     # even when we don't push, exchanging phase data is useful
     remotephases = pushop.remote.listkeys('phases')
     if (pushop.ui.configbool('ui', '_usedassubrepo', False)
         and remotephases    # server supports phases
         and pushop.ret is None # nothing was pushed
         and remotephases.get('publishing', False)):
         # When:
         # - this is a subrepo push
         # - and remote support phase
         # - and no changeset was pushed
         # - and remote is publishing
         # We may be in issue 3871 case!
         # We drop the possible phase synchronisation done by
         # courtesy to publish changesets possibly locally draft
         # on the remote.
         remotephases = {'publishing': 'True'}
     if not remotephases: # old server or public only reply from non-publishing
         _localphasemove(pushop, cheads)
         # don't push any phase data as there is nothing to push
     else:
         ana = phases.analyzeremotephases(pushop.repo, cheads,
                                          remotephases)
         pheads, droots = ana
         ### Apply remote phase on local
         if remotephases.get('publishing', False):
             _localphasemove(pushop, cheads)
         else: # publish = False
             _localphasemove(pushop, pheads)
             _localphasemove(pushop, cheads, phases.draft)
         ### Apply local phase on remote
 
         if pushop.ret:
             if 'phases' in pushop.stepsdone:
                 # phases already pushed though bundle2
                 return
             outdated = pushop.outdatedphases
         else:
             outdated = pushop.fallbackoutdatedphases
 
         pushop.stepsdone.add('phases')
 
         # filter heads already turned public by the push
         outdated = [c for c in outdated if c.node() not in pheads]
         b2caps = bundle2.bundle2caps(pushop.remote)
         if 'b2x:pushkey' in b2caps:
             # server supports bundle2, let's do a batched push through it
             #
             # This will eventually be unified with the changesets bundle2 push
             bundler = bundle2.bundle20(pushop.ui, b2caps)
             capsblob = bundle2.encodecaps(bundle2.getrepocaps(pushop.repo))
             bundler.newpart('b2x:replycaps', data=capsblob)
             part2node = []
             enc = pushkey.encode
             for newremotehead in outdated:
                 part = bundler.newpart('b2x:pushkey')
                 part.addparam('namespace', enc('phases'))
                 part.addparam('key', enc(newremotehead.hex()))
                 part.addparam('old', enc(str(phases.draft)))
                 part.addparam('new', enc(str(phases.public)))
                 part2node.append((part.id, newremotehead))
             stream = util.chunkbuffer(bundler.getchunks())
             try:
                 reply = pushop.remote.unbundle(stream, ['force'], 'push')
                 op = bundle2.processbundle(pushop.repo, reply)
             except error.BundleValueError, exc:
                 raise util.Abort('missing support for %s' % exc)
             for partid, node in part2node:
                 partrep = op.records.getreplies(partid)
                 results = partrep['pushkey']
                 assert len(results) <= 1
                 msg = None
                 if not results:
                     msg = _('server ignored update of %s to public!\n') % node
                 elif not int(results[0]['return']):
                     msg = _('updating %s to public failed!\n') % node
                 if msg is not None:
                     pushop.ui.warn(msg)
 
         else:
             # fallback to independant pushkey command
             for newremotehead in outdated:
                 r = pushop.remote.pushkey('phases',
                                           newremotehead.hex(),
                                           str(phases.draft),
                                           str(phases.public))
                 if not r:
                     pushop.ui.warn(_('updating %s to public failed!\n')
                                    % newremotehead)
 
 def _localphasemove(pushop, nodes, phase=phases.public):
     """move <nodes> to <phase> in the local source repo"""
     if pushop.locallocked:
         tr = pushop.repo.transaction('push-phase-sync')
         try:
             phases.advanceboundary(pushop.repo, tr, phase, nodes)
             tr.close()
         finally:
             tr.release()
     else:
         # repo is not locked, do not change any phases!
         # Informs the user that phases should have been moved when
         # applicable.
         actualmoves = [n for n in nodes if phase < pushop.repo[n].phase()]
         phasestr = phases.phasenames[phase]
         if actualmoves:
             pushop.ui.status(_('cannot lock source repo, skipping '
                                'local %s phase update\n') % phasestr)
 
 def _pushobsolete(pushop):
     """utility function to push obsolete markers to a remote"""
     if 'obsmarkers' in pushop.stepsdone:
         return
     pushop.ui.debug('try to push obsolete markers to remote\n')
     repo = pushop.repo
     remote = pushop.remote
     pushop.stepsdone.add('obsmarkers')
     if pushop.outobsmarkers:
         rslts = []
         remotedata = obsolete._pushkeyescape(pushop.outobsmarkers)
         for key in sorted(remotedata, reverse=True):
             # reverse sort to ensure we end with dump0
             data = remotedata[key]
             rslts.append(remote.pushkey('obsolete', key, '', data))
         if [r for r in rslts if not r]:
             msg = _('failed to push some obsolete markers!\n')
             repo.ui.warn(msg)
 
 def _pushbookmark(pushop):
     """Update bookmark position on remote"""
     if pushop.ret == 0 or 'bookmarks' in pushop.stepsdone:
         return
     pushop.stepsdone.add('bookmarks')
     ui = pushop.ui
     remote = pushop.remote
     for b, old, new in pushop.outbookmarks:
         if remote.pushkey('bookmarks', b, old, new):
             ui.status(_("updating bookmark %s\n") % b)
         else:
             ui.warn(_('updating bookmark %s failed!\n') % b)
 
 class pulloperation(object):
     """A object that represent a single pull operation
 
     It purpose is to carry push related state and very common operation.
 
     A new should be created at the beginning of each pull and discarded
     afterward.
     """
 
     def __init__(self, repo, remote, heads=None, force=False):
         # repo we pull into
         self.repo = repo
         # repo we pull from
         self.remote = remote
         # revision we try to pull (None is "all")
         self.heads = heads
         # do we force pull?
         self.force = force
         # the name the pull transaction
         self._trname = 'pull\n' + util.hidepassword(remote.url())
         # hold the transaction once created
         self._tr = None
         # set of common changeset between local and remote before pull
         self.common = None
         # set of pulled head
         self.rheads = None
         # list of missing changeset to fetch remotely
         self.fetch = None
         # result of changegroup pulling (used as return code by pull)
         self.cgresult = None
         # list of step remaining todo (related to future bundle2 usage)
         self.todosteps = set(['changegroup', 'phases', 'obsmarkers'])
 
     @util.propertycache
     def pulledsubset(self):
         """heads of the set of changeset target by the pull"""
         # compute target subset
         if self.heads is None:
             # We pulled every thing possible
             # sync on everything common
             c = set(self.common)
             ret = list(self.common)
             for n in self.rheads:
                 if n not in c:
                     ret.append(n)
             return ret
         else:
             # We pulled a specific subset
             # sync on this subset
             return self.heads
 
     def gettransaction(self):
         """get appropriate pull transaction, creating it if needed"""
         if self._tr is None:
             self._tr = self.repo.transaction(self._trname)
         return self._tr
 
     def closetransaction(self):
         """close transaction if created"""
         if self._tr is not None:
             self._tr.close()
 
     def releasetransaction(self):
         """release transaction if created"""
         if self._tr is not None:
             self._tr.release()
 
 def pull(repo, remote, heads=None, force=False):
     pullop = pulloperation(repo, remote, heads, force)
     if pullop.remote.local():
         missing = set(pullop.remote.requirements) - pullop.repo.supported
         if missing:
             msg = _("required features are not"
                     " supported in the destination:"
                     " %s") % (', '.join(sorted(missing)))
             raise util.Abort(msg)
 
     lock = pullop.repo.lock()
     try:
         _pulldiscovery(pullop)
         if (pullop.repo.ui.configbool('experimental', 'bundle2-exp', False)
             and pullop.remote.capable('bundle2-exp')):
             _pullbundle2(pullop)
         if 'changegroup' in pullop.todosteps:
             _pullchangeset(pullop)
         if 'phases' in pullop.todosteps:
             _pullphase(pullop)
         if 'obsmarkers' in pullop.todosteps:
             _pullobsolete(pullop)
         pullop.closetransaction()
     finally:
         pullop.releasetransaction()
         lock.release()
 
     return pullop.cgresult
 
 def _pulldiscovery(pullop):
     """discovery phase for the pull
 
     Current handle changeset discovery only, will change handle all discovery
     at some point."""
     tmp = discovery.findcommonincoming(pullop.repo.unfiltered(),
                                        pullop.remote,
                                        heads=pullop.heads,
                                        force=pullop.force)
     pullop.common, pullop.fetch, pullop.rheads = tmp
 
 def _pullbundle2(pullop):
     """pull data using bundle2
 
     For now, the only supported data are changegroup."""
     remotecaps = bundle2.bundle2caps(pullop.remote)
     kwargs = {'bundlecaps': caps20to10(pullop.repo)}
     # pulling changegroup
     pullop.todosteps.remove('changegroup')
 
     kwargs['common'] = pullop.common
     kwargs['heads'] = pullop.heads or pullop.rheads
     kwargs['cg'] = pullop.fetch
     if 'b2x:listkeys' in remotecaps:
         kwargs['listkeys'] = ['phase']
     if not pullop.fetch:
         pullop.repo.ui.status(_("no changes found\n"))
         pullop.cgresult = 0
     else:
         if pullop.heads is None and list(pullop.common) == [nullid]:
             pullop.repo.ui.status(_("requesting all changes\n"))
     if obsolete._enabled:
         remoteversions = bundle2.obsmarkersversion(remotecaps)
         if obsolete.commonversion(remoteversions) is not None:
             kwargs['obsmarkers'] = True
             pullop.todosteps.remove('obsmarkers')
     _pullbundle2extraprepare(pullop, kwargs)
     if kwargs.keys() == ['format']:
         return # nothing to pull
     bundle = pullop.remote.getbundle('pull', **kwargs)
     try:
         op = bundle2.processbundle(pullop.repo, bundle, pullop.gettransaction)
     except error.BundleValueError, exc:
         raise util.Abort('missing support for %s' % exc)
 
     if pullop.fetch:
         assert len(op.records['changegroup']) == 1
         pullop.cgresult = op.records['changegroup'][0]['return']
 
     # processing phases change
     for namespace, value in op.records['listkeys']:
         if namespace == 'phases':
             _pullapplyphases(pullop, value)
 
 def _pullbundle2extraprepare(pullop, kwargs):
     """hook function so that extensions can extend the getbundle call"""
     pass
 
 def _pullchangeset(pullop):
     """pull changeset from unbundle into the local repo"""
     # We delay the open of the transaction as late as possible so we
     # don't open transaction for nothing or you break future useful
     # rollback call
     pullop.todosteps.remove('changegroup')
     if not pullop.fetch:
             pullop.repo.ui.status(_("no changes found\n"))
             pullop.cgresult = 0
             return
     pullop.gettransaction()
     if pullop.heads is None and list(pullop.common) == [nullid]:
         pullop.repo.ui.status(_("requesting all changes\n"))
     elif pullop.heads is None and pullop.remote.capable('changegroupsubset'):
         # issue1320, avoid a race if remote changed after discovery
         pullop.heads = pullop.rheads
 
     if pullop.remote.capable('getbundle'):
         # TODO: get bundlecaps from remote
         cg = pullop.remote.getbundle('pull', common=pullop.common,
                                      heads=pullop.heads or pullop.rheads)
     elif pullop.heads is None:
         cg = pullop.remote.changegroup(pullop.fetch, 'pull')
     elif not pullop.remote.capable('changegroupsubset'):
         raise util.Abort(_("partial pull cannot be done because "
                            "other repository doesn't support "
                            "changegroupsubset."))
     else:
         cg = pullop.remote.changegroupsubset(pullop.fetch, pullop.heads, 'pull')
     pullop.cgresult = changegroup.addchangegroup(pullop.repo, cg, 'pull',
                                                  pullop.remote.url())
 
 def _pullphase(pullop):
     # Get remote phases data from remote
     remotephases = pullop.remote.listkeys('phases')
     _pullapplyphases(pullop, remotephases)
 
 def _pullapplyphases(pullop, remotephases):
     """apply phase movement from observed remote state"""
     pullop.todosteps.remove('phases')
     publishing = bool(remotephases.get('publishing', False))
     if remotephases and not publishing:
         # remote is new and unpublishing
         pheads, _dr = phases.analyzeremotephases(pullop.repo,
                                                  pullop.pulledsubset,
                                                  remotephases)
         dheads = pullop.pulledsubset
     else:
         # Remote is old or publishing all common changesets
         # should be seen as public
         pheads = pullop.pulledsubset
         dheads = []
     unfi = pullop.repo.unfiltered()
     phase = unfi._phasecache.phase
     rev = unfi.changelog.nodemap.get
     public = phases.public
     draft = phases.draft
 
     # exclude changesets already public locally and update the others
     pheads = [pn for pn in pheads if phase(unfi, rev(pn)) > public]
     if pheads:
         tr = pullop.gettransaction()
         phases.advanceboundary(pullop.repo, tr, public, pheads)
 
     # exclude changesets already draft locally and update the others
     dheads = [pn for pn in dheads if phase(unfi, rev(pn)) > draft]
     if dheads:
         tr = pullop.gettransaction()
         phases.advanceboundary(pullop.repo, tr, draft, dheads)
 
 def _pullobsolete(pullop):
     """utility function to pull obsolete markers from a remote
 
     The `gettransaction` is function that return the pull transaction, creating
     one if necessary. We return the transaction to inform the calling code that
     a new transaction have been created (when applicable).
 
     Exists mostly to allow overriding for experimentation purpose"""
     pullop.todosteps.remove('obsmarkers')
     tr = None
     if obsolete._enabled:
         pullop.repo.ui.debug('fetching remote obsolete markers\n')
         remoteobs = pullop.remote.listkeys('obsolete')
         if 'dump0' in remoteobs:
             tr = pullop.gettransaction()
             for key in sorted(remoteobs, reverse=True):
                 if key.startswith('dump'):
                     data = base85.b85decode(remoteobs[key])
                     pullop.repo.obsstore.mergemarkers(tr, data)
             pullop.repo.invalidatevolatilesets()
     return tr
 
 def caps20to10(repo):
     """return a set with appropriate options to use bundle20 during getbundle"""
     caps = set(['HG2X'])
     capsblob = bundle2.encodecaps(bundle2.getrepocaps(repo))
     caps.add('bundle2=' + urllib.quote(capsblob))
     return caps
 
+# List of names of steps to perform for a bundle2 for getbundle, order matters.
+getbundle2partsorder = []
+
+# Mapping between step name and function
+#
+# This exists to help extensions wrap steps if necessary
+getbundle2partsmapping = {}
+
+def getbundle2partsgenerator(stepname):
+    """decorator for function generating bundle2 part for getbundle
+
+    The function is added to the step -> function mapping and appended to the
+    list of steps.  Beware that decorated functions will be added in order
+    (this may matter).
+
+    You can only use this decorator for new steps, if you want to wrap a step
+    from an extension, attack the getbundle2partsmapping dictionary directly."""
+    def dec(func):
+        assert stepname not in getbundle2partsmapping
+        getbundle2partsmapping[stepname] = func
+        getbundle2partsorder.append(stepname)
+        return func
+    return dec
+
 def getbundle(repo, source, heads=None, common=None, bundlecaps=None,
               **kwargs):
     """return a full bundle (with potentially multiple kind of parts)
 
     Could be a bundle HG10 or a bundle HG2X depending on bundlecaps
     passed. For now, the bundle can contain only changegroup, but this will
     changes when more part type will be available for bundle2.
 
     This is different from changegroup.getchangegroup that only returns an HG10
     changegroup bundle. They may eventually get reunited in the future when we
     have a clearer idea of the API we what to query different data.
 
     The implementation is at a very early stage and will get massive rework
     when the API of bundle is refined.
     """
-    cg = None
-    if kwargs.get('cg', True):
-        # build changegroup bundle here.
-        cg = changegroup.getchangegroup(repo, source, heads=heads,
-                                         common=common, bundlecaps=bundlecaps)
-    elif 'HG2X' not in bundlecaps:
+    # bundle10 case
+    if bundlecaps is None or 'HG2X' not in bundlecaps:
+        if bundlecaps and not kwargs.get('cg', True):
         raise ValueError(_('request for bundle10 must include changegroup'))
-    if bundlecaps is None or 'HG2X' not in bundlecaps:
+
         if kwargs:
             raise ValueError(_('unsupported getbundle arguments: %s')
                              % ', '.join(sorted(kwargs.keys())))
-        return cg
-    # very crude first implementation,
-    # the bundle API will change and the generation will be done lazily.
+        return changegroup.getchangegroup(repo, source, heads=heads,
+                                          common=common, bundlecaps=bundlecaps)
+
+    # bundle20 case
     b2caps = {}
     for bcaps in bundlecaps:
         if bcaps.startswith('bundle2='):
             blob = urllib.unquote(bcaps[len('bundle2='):])
             b2caps.update(bundle2.decodecaps(blob))
     bundler = bundle2.bundle20(repo.ui, b2caps)
+
+    for name in getbundle2partsorder:
+        func = getbundle2partsmapping[name]
+        func(bundler, repo, source, heads=heads, common=common,
+             bundlecaps=bundlecaps, b2caps=b2caps, **kwargs)
+
+    return util.chunkbuffer(bundler.getchunks())
+
+@getbundle2partsgenerator('changegroup')
+def _getbundlechangegrouppart(bundler, repo, source, heads=None, common=None,
+                              bundlecaps=None, b2caps=None, **kwargs):
+    """add a changegroup part to the requested bundle"""
+    cg = None
+    if kwargs.get('cg', True):
+        # build changegroup bundle here.
+        cg = changegroup.getchangegroup(repo, source, heads=heads,
+                                        common=common, bundlecaps=bundlecaps)
+
     if cg:
         bundler.newpart('b2x:changegroup', data=cg.getchunks())
+
+@getbundle2partsgenerator('listkeys')
+def _getbundlelistkeysparts(bundler, repo, source, heads=None, common=None,
+                           bundlecaps=None, b2caps=None, **kwargs):
+    """add parts containing listkeys namespaces to the requested bundle"""
     listkeys = kwargs.get('listkeys', ())
     for namespace in listkeys:
         part = bundler.newpart('b2x:listkeys')
         part.addparam('namespace', namespace)
         keys = repo.listkeys(namespace).items()
         part.data = pushkey.encodekeys(keys)
-    _getbundleobsmarkerpart(bundler, repo, source, heads=heads, common=common,
-                            bundlecaps=bundlecaps, b2caps=b2caps, **kwargs)
-    _getbundleextrapart(bundler, repo, source, heads=heads, common=common,
-                        bundlecaps=bundlecaps, b2caps=b2caps, **kwargs)
-    return util.chunkbuffer(bundler.getchunks())
 
+@getbundle2partsgenerator('obsmarkers')
 def _getbundleobsmarkerpart(bundler, repo, source, heads=None, common=None,
                             bundlecaps=None, b2caps=None, **kwargs):
     """add an obsolescence markers part to the requested bundle"""
     if kwargs.get('obsmarkers', False):
         if heads is None:
             heads = repo.heads()
         subset = [c.node() for c in repo.set('::%ln', heads)]
         markers = repo.obsstore.relevantmarkers(subset)
         buildobsmarkerspart(bundler, markers)
 
+@getbundle2partsgenerator('extra')
 def _getbundleextrapart(bundler, repo, source, heads=None, common=None,
                         bundlecaps=None, b2caps=None, **kwargs):
     """hook function to let extensions add parts to the requested bundle"""
     pass
 
 def check_heads(repo, their_heads, context):
     """check if the heads of a repo have been modified
 
     Used by peer for unbundling.
     """
     heads = repo.heads()
     heads_hash = util.sha1(''.join(sorted(heads))).digest()
     if not (their_heads == ['force'] or their_heads == heads or
             their_heads == ['hashed', heads_hash]):
         # someone else committed/pushed/unbundled while we
         # were transferring data
         raise error.PushRaced('repository changed while %s - '
                               'please try again' % context)
 
 def unbundle(repo, cg, heads, source, url):
     """Apply a bundle to a repo.
 
     this function makes sure the repo is locked during the application and have
     mechanism to check that no push race occurred between the creation of the
     bundle and its application.
 
     If the push was raced as PushRaced exception is raised."""
     r = 0
     # need a transaction when processing a bundle2 stream
     tr = None
     lock = repo.lock()
     try:
         check_heads(repo, heads, 'uploading changes')
         # push can proceed
         if util.safehasattr(cg, 'params'):
             try:
                 tr = repo.transaction('unbundle')
                 tr.hookargs['bundle2-exp'] = '1'
                 r = bundle2.processbundle(repo, cg, lambda: tr).reply
                 cl = repo.unfiltered().changelog
                 p = cl.writepending() and repo.root or ""
                 repo.hook('b2x-pretransactionclose', throw=True, source=source,
                           url=url, pending=p, **tr.hookargs)
                 tr.close()
                 repo.hook('b2x-transactionclose', source=source, url=url,
                           **tr.hookargs)
             except Exception, exc:
                 exc.duringunbundle2 = True
                 raise
         else:
             r = changegroup.addchangegroup(repo, cg, source, url)
     finally:
         if tr is not None:
             tr.release()
         lock.release()
     return r