update: change default destination to tipmost descendant (issue4673) (BC)

Bare 'hg update' now brings you to the tipmost descendant (on the same branch).
Leaving the user on the same topological branch. The previous behavior, updating
to the tipmost changeset on the same branch could lead to jump from a
topological branch to another. This was confusing and impractical. As the only
conceivable reason for the old behavior have been address by the recently
introduce message about other heads, we can "safely" change this behavior

All test changes have been reviewed and seen a valid consequences.

mercurial/destutil.py

@@ -1,251 +1,252 b''
 # destutil.py - Mercurial utility function for command destination
 #
 #  Copyright Matt Mackall <[e-mail]> and other
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 from .i18n import _
 from . import (
     bookmarks,
     error,
     obsolete,
 )
 
 def _destupdatevalidate(repo, rev, clean, check):
     """validate that the destination comply to various rules
 
     This exists as its own function to help wrapping from extensions."""
     wc = repo[None]
     p1 = wc.p1()
     if not clean:
         # Check that the update is linear.
         #
         # Mercurial do not allow update-merge for non linear pattern
         # (that would be technically possible but was considered too confusing
         # for user a long time ago)
         #
         # See mercurial.merge.update for details
         if p1.rev() not in repo.changelog.ancestors([rev], inclusive=True):
             dirty = wc.dirty(missing=True)
             foreground = obsolete.foreground(repo, [p1.node()])
             if not repo[rev].node() in foreground:
                 if dirty:
                     msg = _("uncommitted changes")
                     hint = _("commit and merge, or update --clean to"
                              " discard changes")
                     raise error.UpdateAbort(msg, hint=hint)
                 elif not check:  # destination is not a descendant.
                     msg = _("not a linear update")
                     hint = _("merge or update --check to force update")
                     raise error.UpdateAbort(msg, hint=hint)
 
 def _destupdateobs(repo, clean, check):
     """decide of an update destination from obsolescence markers"""
     node = None
     wc = repo[None]
     p1 = wc.p1()
     movemark = None
 
     if p1.obsolete() and not p1.children():
         # allow updating to successors
         successors = obsolete.successorssets(repo, p1.node())
 
         # behavior of certain cases is as follows,
         #
         # divergent changesets: update to highest rev, similar to what
         #     is currently done when there are more than one head
         #     (i.e. 'tip')
         #
         # replaced changesets: same as divergent except we know there
         # is no conflict
         #
         # pruned changeset: no update is done; though, we could
         #     consider updating to the first non-obsolete parent,
         #     similar to what is current done for 'hg prune'
 
         if successors:
             # flatten the list here handles both divergent (len > 1)
             # and the usual case (len = 1)
             successors = [n for sub in successors for n in sub]
 
             # get the max revision for the given successors set,
             # i.e. the 'tip' of a set
             node = repo.revs('max(%ln)', successors).first()
             if bookmarks.isactivewdirparent(repo):
                 movemark = repo['.'].node()
     return node, movemark, None
 
 def _destupdatebook(repo, clean, check):
     """decide on an update destination from active bookmark"""
     # we also move the active bookmark, if any
     activemark = None
     node, movemark = bookmarks.calculateupdate(repo.ui, repo, None)
     if node is not None:
         activemark = node
     return node, movemark, activemark
 
 def _destupdatebranch(repo, clean, check):
     """decide on an update destination from current branch"""
     wc = repo[None]
     movemark = node = None
     try:
-        node = repo.branchtip(wc.branch())
+        node = repo.revs('max(.::(head() and branch(%s)))'
+                         , wc.branch()).first()
         if bookmarks.isactivewdirparent(repo):
             movemark = repo['.'].node()
     except error.RepoLookupError:
         if wc.branch() == 'default': # no default branch!
             node = repo.lookup('tip') # update to tip
         else:
             raise error.Abort(_("branch %s not found") % wc.branch())
     return node, movemark, None
 
 # order in which each step should be evalutated
 # steps are run until one finds a destination
 destupdatesteps = ['evolution', 'bookmark', 'branch']
 # mapping to ease extension overriding steps.
 destupdatestepmap = {'evolution': _destupdateobs,
                      'bookmark': _destupdatebook,
                      'branch': _destupdatebranch,
                      }
 
 def destupdate(repo, clean=False, check=False):
     """destination for bare update operation
 
     return (rev, movemark, activemark)
 
     - rev: the revision to update to,
     - movemark: node to move the active bookmark from
                 (cf bookmark.calculate update),
     - activemark: a bookmark to activate at the end of the update.
     """
     node = movemark = activemark = None
 
     for step in destupdatesteps:
         node, movemark, activemark = destupdatestepmap[step](repo, clean, check)
         if node is not None:
             break
     rev = repo[node].rev()
 
     _destupdatevalidate(repo, rev, clean, check)
 
     return rev, movemark, activemark
 
 def _destmergebook(repo):
     """find merge destination in the active bookmark case"""
     node = None
     bmheads = repo.bookmarkheads(repo._activebookmark)
     curhead = repo[repo._activebookmark].node()
     if len(bmheads) == 2:
         if curhead == bmheads[0]:
             node = bmheads[1]
         else:
             node = bmheads[0]
     elif len(bmheads) > 2:
         raise error.Abort(_("multiple matching bookmarks to merge - "
             "please merge with an explicit rev or bookmark"),
             hint=_("run 'hg heads' to see all heads"))
     elif len(bmheads) <= 1:
         raise error.Abort(_("no matching bookmark to merge - "
             "please merge with an explicit rev or bookmark"),
             hint=_("run 'hg heads' to see all heads"))
     assert node is not None
     return node
 
 def _destmergebranch(repo):
     """find merge destination based on branch heads"""
     node = None
     branch = repo[None].branch()
     bheads = repo.branchheads(branch)
     nbhs = [bh for bh in bheads if not repo[bh].bookmarks()]
 
     if len(nbhs) > 2:
         raise error.Abort(_("branch '%s' has %d heads - "
                            "please merge with an explicit rev")
                          % (branch, len(bheads)),
                          hint=_("run 'hg heads .' to see heads"))
 
     parent = repo.dirstate.p1()
     if len(nbhs) <= 1:
         if len(bheads) > 1:
             raise error.Abort(_("heads are bookmarked - "
                                "please merge with an explicit rev"),
                              hint=_("run 'hg heads' to see all heads"))
         if len(repo.heads()) > 1:
             raise error.Abort(_("branch '%s' has one head - "
                                "please merge with an explicit rev")
                              % branch,
                              hint=_("run 'hg heads' to see all heads"))
         msg, hint = _('nothing to merge'), None
         if parent != repo.lookup(branch):
             hint = _("use 'hg update' instead")
         raise error.Abort(msg, hint=hint)
 
     if parent not in bheads:
         raise error.Abort(_('working directory not at a head revision'),
                          hint=_("use 'hg update' or merge with an "
                                 "explicit revision"))
     if parent == nbhs[0]:
         node = nbhs[-1]
     else:
         node = nbhs[0]
     assert node is not None
     return node
 
 def destmerge(repo):
     if repo._activebookmark:
         node = _destmergebook(repo)
     else:
         node = _destmergebranch(repo)
     return repo[node].rev()
 
 histeditdefaultrevset = 'reverse(only(.) and not public() and not ::merge())'
 
 def desthistedit(ui, repo):
     """Default base revision to edit for `hg histedit`."""
     # Avoid cycle: scmutil -> revset -> destutil
     from . import scmutil
 
     default = ui.config('histedit', 'defaultrev', histeditdefaultrevset)
     if default:
         revs = scmutil.revrange(repo, [default])
         if revs:
             # The revset supplied by the user may not be in ascending order nor
             # take the first revision. So do this manually.
             revs.sort()
             return revs.first()
 
     return None
 
 def _statusotherbook(ui, repo):
     bmheads = repo.bookmarkheads(repo._activebookmark)
     curhead = repo[repo._activebookmark].node()
     if repo.revs('%n and parents()', curhead):
         # we are on the active bookmark
         bmheads = [b for b in bmheads if curhead != b]
         if bmheads:
             msg = _('%i other divergent bookmarks for "%s"\n')
             ui.status(msg % (len(bmheads), repo._activebookmark))
 
 def _statusotherbranchheads(ui, repo):
     currentbranch = repo.dirstate.branch()
     heads = repo.branchheads(currentbranch)
     l = len(heads)
     if repo.revs('%ln and parents()', heads):
         # we are on a head
         heads = repo.revs('%ln - parents()', heads)
         if heads and l != len(heads):
             ui.status(_('%i other heads for branch "%s"\n') %
                       (len(heads), currentbranch))
 
 def statusotherdests(ui, repo):
     """Print message about other head"""
     # XXX we should probably include a hint:
     # - about what to do
     # - how to see such heads
     if repo._activebookmark:
         _statusotherbook(ui, repo)
     else:
         _statusotherbranchheads(ui, repo)

tests/test-bookmarks.t

@@ -1,871 +1,848 b''
   $ hg init
 
 no bookmarks
 
   $ hg bookmarks
   no bookmarks set
 
   $ hg bookmarks -Tjson
   [
   ]
 
 bookmark rev -1
 
   $ hg bookmark X
 
 list bookmarks
 
   $ hg bookmarks
    * X                         -1:000000000000
 
 list bookmarks with color
 
   $ hg --config extensions.color= --config color.mode=ansi \
   >    bookmarks --color=always
   \x1b[0;32m * \x1b[0m\x1b[0;32mX\x1b[0m\x1b[0;32m                         -1:000000000000\x1b[0m (esc)
 
   $ echo a > a
   $ hg add a
   $ hg commit -m 0
 
 bookmark X moved to rev 0
 
   $ hg bookmarks
    * X                         0:f7b1eb17ad24
 
 look up bookmark
 
   $ hg log -r X
   changeset:   0:f7b1eb17ad24
   bookmark:    X
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0
   
 
 second bookmark for rev 0, command should work even with ui.strict on
 
   $ hg --config ui.strict=1 bookmark X2
 
 bookmark rev -1 again
 
   $ hg bookmark -r null Y
 
 list bookmarks
 
   $ hg bookmarks
      X                         0:f7b1eb17ad24
    * X2                        0:f7b1eb17ad24
      Y                         -1:000000000000
 
   $ echo b > b
   $ hg add b
   $ hg commit -m 1
 
   $ hg bookmarks -Tjson
   [
    {
     "active": false,
     "bookmark": "X",
     "node": "f7b1eb17ad24730a1651fccd46c43826d1bbc2ac",
     "rev": 0
    },
    {
     "active": true,
     "bookmark": "X2",
     "node": "925d80f479bb026b0fb3deb27503780b13f74123",
     "rev": 1
    },
    {
     "active": false,
     "bookmark": "Y",
     "node": "0000000000000000000000000000000000000000",
     "rev": -1
    }
   ]
 
 bookmarks revset
 
   $ hg log -r 'bookmark()'
   changeset:   0:f7b1eb17ad24
   bookmark:    X
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0
   
   changeset:   1:925d80f479bb
   bookmark:    X2
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1
   
   $ hg log -r 'bookmark(Y)'
   $ hg log -r 'bookmark(X2)'
   changeset:   1:925d80f479bb
   bookmark:    X2
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1
   
   $ hg log -r 'bookmark("re:X")'
   changeset:   0:f7b1eb17ad24
   bookmark:    X
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0
   
   changeset:   1:925d80f479bb
   bookmark:    X2
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1
   
   $ hg log -r 'bookmark("literal:X")'
   changeset:   0:f7b1eb17ad24
   bookmark:    X
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     0
   
 
   $ hg log -r 'bookmark(unknown)'
   abort: bookmark 'unknown' does not exist!
   [255]
   $ hg log -r 'bookmark("literal:unknown")'
   abort: bookmark 'unknown' does not exist!
   [255]
   $ hg log -r 'bookmark("re:unknown")'
   abort: no bookmarks exist that match 'unknown'!
   [255]
   $ hg log -r 'present(bookmark("literal:unknown"))'
   $ hg log -r 'present(bookmark("re:unknown"))'
 
   $ hg help revsets | grep 'bookmark('
       "bookmark([name])"
 
 bookmarks X and X2 moved to rev 1, Y at rev -1
 
   $ hg bookmarks
      X                         0:f7b1eb17ad24
    * X2                        1:925d80f479bb
      Y                         -1:000000000000
 
 bookmark rev 0 again
 
   $ hg bookmark -r 0 Z
 
   $ hg update X
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   (activating bookmark X)
   $ echo c > c
   $ hg add c
   $ hg commit -m 2
   created new head
 
 bookmarks X moved to rev 2, Y at rev -1, Z at rev 0
 
   $ hg bookmarks
    * X                         2:db815d6d32e6
      X2                        1:925d80f479bb
      Y                         -1:000000000000
      Z                         0:f7b1eb17ad24
 
 rename nonexistent bookmark
 
   $ hg bookmark -m A B
   abort: bookmark 'A' does not exist
   [255]
 
 rename to existent bookmark
 
   $ hg bookmark -m X Y
   abort: bookmark 'Y' already exists (use -f to force)
   [255]
 
 force rename to existent bookmark
 
   $ hg bookmark -f -m X Y
 
 list bookmarks
 
   $ hg bookmark
      X2                        1:925d80f479bb
    * Y                         2:db815d6d32e6
      Z                         0:f7b1eb17ad24
 
 bookmarks from a revset
   $ hg bookmark -r '.^1' REVSET
   $ hg bookmark -r ':tip' TIP
   $ hg up -q TIP
   $ hg bookmarks
      REVSET                    0:f7b1eb17ad24
    * TIP                       2:db815d6d32e6
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
      Z                         0:f7b1eb17ad24
 
   $ hg bookmark -d REVSET
   $ hg bookmark -d TIP
 
 rename without new name or multiple names
 
   $ hg bookmark -m Y
   abort: new bookmark name required
   [255]
   $ hg bookmark -m Y Y2 Y3
   abort: only one new bookmark name allowed
   [255]
 
 delete without name
 
   $ hg bookmark -d
   abort: bookmark name required
   [255]
 
 delete nonexistent bookmark
 
   $ hg bookmark -d A
   abort: bookmark 'A' does not exist
   [255]
 
 bookmark name with spaces should be stripped
 
   $ hg bookmark ' x  y '
 
 list bookmarks
 
   $ hg bookmarks
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
      Z                         0:f7b1eb17ad24
    * x  y                      2:db815d6d32e6
 
 look up stripped bookmark name
 
   $ hg log -r '"x  y"'
   changeset:   2:db815d6d32e6
   bookmark:    Y
   bookmark:    x  y
   tag:         tip
   parent:      0:f7b1eb17ad24
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     2
   
 
 reject bookmark name with newline
 
   $ hg bookmark '
   > '
   abort: bookmark names cannot consist entirely of whitespace
   [255]
 
   $ hg bookmark -m Z '
   > '
   abort: bookmark names cannot consist entirely of whitespace
   [255]
 
 bookmark with reserved name
 
   $ hg bookmark tip
   abort: the name 'tip' is reserved
   [255]
 
   $ hg bookmark .
   abort: the name '.' is reserved
   [255]
 
   $ hg bookmark null
   abort: the name 'null' is reserved
   [255]
 
 
 bookmark with existing name
 
   $ hg bookmark X2
   abort: bookmark 'X2' already exists (use -f to force)
   [255]
 
   $ hg bookmark -m Y Z
   abort: bookmark 'Z' already exists (use -f to force)
   [255]
 
 bookmark with name of branch
 
   $ hg bookmark default
   abort: a bookmark cannot have the name of an existing branch
   [255]
 
   $ hg bookmark -m Y default
   abort: a bookmark cannot have the name of an existing branch
   [255]
 
 bookmark with integer name
 
   $ hg bookmark 10
   abort: cannot use an integer as a name
   [255]
 
 incompatible options
 
   $ hg bookmark -m Y -d Z
   abort: --delete and --rename are incompatible
   [255]
 
   $ hg bookmark -r 1 -d Z
   abort: --rev is incompatible with --delete
   [255]
 
   $ hg bookmark -r 1 -m Z Y
   abort: --rev is incompatible with --rename
   [255]
 
 force bookmark with existing name
 
   $ hg bookmark -f X2
 
 force bookmark back to where it was, should deactivate it
 
   $ hg bookmark -fr1 X2
   $ hg bookmarks
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
      Z                         0:f7b1eb17ad24
      x  y                      2:db815d6d32e6
 
 forward bookmark to descendant without --force
 
   $ hg bookmark Z
   moving bookmark 'Z' forward from f7b1eb17ad24
 
 list bookmarks
 
   $ hg bookmark
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
    * Z                         2:db815d6d32e6
      x  y                      2:db815d6d32e6
 
 revision but no bookmark name
 
   $ hg bookmark -r .
   abort: bookmark name required
   [255]
 
 bookmark name with whitespace only
 
   $ hg bookmark ' '
   abort: bookmark names cannot consist entirely of whitespace
   [255]
 
   $ hg bookmark -m Y ' '
   abort: bookmark names cannot consist entirely of whitespace
   [255]
 
 invalid bookmark
 
   $ hg bookmark 'foo:bar'
   abort: ':' cannot be used in a name
   [255]
 
   $ hg bookmark 'foo
   > bar'
   abort: '\n' cannot be used in a name
   [255]
 
 the bookmark extension should be ignored now that it is part of core
 
   $ echo "[extensions]" >> $HGRCPATH
   $ echo "bookmarks=" >> $HGRCPATH
   $ hg bookmarks
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
    * Z                         2:db815d6d32e6
      x  y                      2:db815d6d32e6
 
 test summary
 
   $ hg summary
   parent: 2:db815d6d32e6 tip
    2
   branch: default
   bookmarks: *Z Y x  y
   commit: (clean)
   update: 1 new changesets, 2 branch heads (merge)
   phases: 3 draft
 
 test id
 
   $ hg id
   db815d6d32e6 tip Y/Z/x  y
 
 test rollback
 
   $ echo foo > f1
   $ hg bookmark tmp-rollback
   $ hg ci -Amr
   adding f1
   $ hg bookmarks
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
      Z                         2:db815d6d32e6
    * tmp-rollback              3:2bf5cfec5864
      x  y                      2:db815d6d32e6
   $ hg rollback
   repository tip rolled back to revision 2 (undo commit)
   working directory now based on revision 2
   $ hg bookmarks
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
      Z                         2:db815d6d32e6
    * tmp-rollback              2:db815d6d32e6
      x  y                      2:db815d6d32e6
   $ hg bookmark -f Z -r 1
   $ hg rollback
   repository tip rolled back to revision 2 (undo bookmark)
   $ hg bookmarks
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
      Z                         2:db815d6d32e6
    * tmp-rollback              2:db815d6d32e6
      x  y                      2:db815d6d32e6
   $ hg bookmark -d tmp-rollback
 
 activate bookmark on working dir parent without --force
 
   $ hg bookmark --inactive Z
   $ hg bookmark Z
 
 test clone
 
   $ hg bookmark -r 2 -i @
   $ hg bookmark -r 2 -i a@
   $ hg bookmarks
      @                         2:db815d6d32e6
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
    * Z                         2:db815d6d32e6
      a@                        2:db815d6d32e6
      x  y                      2:db815d6d32e6
   $ hg clone . cloned-bookmarks
   updating to bookmark @
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R cloned-bookmarks bookmarks
    * @                         2:db815d6d32e6
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
      Z                         2:db815d6d32e6
      a@                        2:db815d6d32e6
      x  y                      2:db815d6d32e6
 
 test clone with pull protocol
 
   $ hg clone --pull . cloned-bookmarks-pull
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 3 changesets with 3 changes to 3 files (+1 heads)
   updating to bookmark @
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R cloned-bookmarks-pull bookmarks
    * @                         2:db815d6d32e6
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
      Z                         2:db815d6d32e6
      a@                        2:db815d6d32e6
      x  y                      2:db815d6d32e6
 
 delete multiple bookmarks at once
 
   $ hg bookmark -d @ a@
 
 test clone with a bookmark named "default" (issue3677)
 
   $ hg bookmark -r 1 -f -i default
   $ hg clone . cloned-bookmark-default
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R cloned-bookmark-default bookmarks
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
      Z                         2:db815d6d32e6
      default                   1:925d80f479bb
      x  y                      2:db815d6d32e6
   $ hg -R cloned-bookmark-default parents -q
   2:db815d6d32e6
   $ hg bookmark -d default
 
 test clone with a specific revision
 
   $ hg clone -r 925d80 . cloned-bookmarks-rev
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 2 changes to 2 files
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R cloned-bookmarks-rev bookmarks
      X2                        1:925d80f479bb
 
 test clone with update to a bookmark
 
   $ hg clone -u Z . ../cloned-bookmarks-update
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R ../cloned-bookmarks-update bookmarks
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
    * Z                         2:db815d6d32e6
      x  y                      2:db815d6d32e6
 
 create bundle with two heads
 
   $ hg clone . tobundle
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo x > tobundle/x
   $ hg -R tobundle add tobundle/x
   $ hg -R tobundle commit -m'x'
   $ hg -R tobundle update -r -2
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ echo y > tobundle/y
   $ hg -R tobundle branch test
   marked working directory as branch test
   (branches are permanent and global, did you want a bookmark?)
   $ hg -R tobundle add tobundle/y
   $ hg -R tobundle commit -m'y'
   $ hg -R tobundle bundle tobundle.hg
   searching for changes
   2 changesets found
   $ hg unbundle tobundle.hg
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 2 changes to 2 files (+1 heads)
   (run 'hg heads' to see heads, 'hg merge' to merge)
 
 update to active bookmark if it's not the parent
 
   $ hg summary
   parent: 2:db815d6d32e6 
    2
   branch: default
   bookmarks: *Z Y x  y
   commit: 1 added, 1 unknown (new branch head)
   update: 2 new changesets (update)
   phases: 5 draft
   $ hg update
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   updating bookmark Z
   $ hg bookmarks
      X2                        1:925d80f479bb
      Y                         2:db815d6d32e6
    * Z                         3:125c9a1d6df6
      x  y                      2:db815d6d32e6
 
 pull --update works the same as pull && update
 
   $ hg bookmark -r3 Y
   moving bookmark 'Y' forward from db815d6d32e6
   $ cp -r  ../cloned-bookmarks-update ../cloned-bookmarks-manual-update
   $ cp -r  ../cloned-bookmarks-update ../cloned-bookmarks-manual-update-with-divergence
 
 (manual version)
 
   $ hg -R ../cloned-bookmarks-manual-update update Y
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (activating bookmark Y)
   $ hg -R ../cloned-bookmarks-manual-update pull .
   pulling from .
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 2 changes to 2 files (+1 heads)
   updating bookmark Y
   updating bookmark Z
   (run 'hg heads' to see heads, 'hg merge' to merge)
 
 (# tests strange but with --date crashing when bookmark have to move)
 
   $ hg -R ../cloned-bookmarks-manual-update update -d 1986
   abort: revision matching date not found
   [255]
   $ hg -R ../cloned-bookmarks-manual-update update
   updating to active bookmark Y
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (activating bookmark Y)
 
 (all in one version)
 
   $ hg -R ../cloned-bookmarks-update update Y
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (activating bookmark Y)
   $ hg -R ../cloned-bookmarks-update pull --update .
   pulling from .
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 2 changes to 2 files (+1 heads)
   updating bookmark Y
   updating bookmark Z
   updating to active bookmark Y
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 We warn about divergent during bare update to the active bookmark
 
   $ hg -R ../cloned-bookmarks-manual-update-with-divergence update Y
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (activating bookmark Y)
   $ hg -R ../cloned-bookmarks-manual-update-with-divergence bookmarks -r X2 Y@1
   $ hg -R ../cloned-bookmarks-manual-update-with-divergence bookmarks
      X2                        1:925d80f479bb
    * Y                         2:db815d6d32e6
      Y@1                       1:925d80f479bb
      Z                         2:db815d6d32e6
      x  y                      2:db815d6d32e6
   $ hg -R ../cloned-bookmarks-manual-update-with-divergence pull
   pulling from $TESTTMP
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 2 changes to 2 files (+1 heads)
   updating bookmark Y
   updating bookmark Z
   (run 'hg heads' to see heads, 'hg merge' to merge)
   $ hg -R ../cloned-bookmarks-manual-update-with-divergence update
   updating to active bookmark Y
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (activating bookmark Y)
   1 other divergent bookmarks for "Y"
 
 test wrongly formated bookmark
 
   $ echo '' >> .hg/bookmarks
   $ hg bookmarks
      X2                        1:925d80f479bb
      Y                         3:125c9a1d6df6
    * Z                         3:125c9a1d6df6
      x  y                      2:db815d6d32e6
   $ echo "Ican'thasformatedlines" >> .hg/bookmarks
   $ hg bookmarks
   malformed line in .hg/bookmarks: "Ican'thasformatedlines"
      X2                        1:925d80f479bb
      Y                         3:125c9a1d6df6
    * Z                         3:125c9a1d6df6
      x  y                      2:db815d6d32e6
 
 test missing revisions
 
   $ echo "925d80f479bc z" > .hg/bookmarks
   $ hg book
   no bookmarks set
 
 test stripping a non-checked-out but bookmarked revision
 
   $ hg log --graph
   o  changeset:   4:9ba5f110a0b3
   |  branch:      test
   |  tag:         tip
   |  parent:      2:db815d6d32e6
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     y
   |
   | @  changeset:   3:125c9a1d6df6
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     x
   |
   o  changeset:   2:db815d6d32e6
   |  parent:      0:f7b1eb17ad24
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     2
   |
   | o  changeset:   1:925d80f479bb
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     1
   |
   o  changeset:   0:f7b1eb17ad24
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     0
   
   $ hg book should-end-on-two
   $ hg co --clean 4
   1 files updated, 0 files merged, 1 files removed, 0 files unresolved
   (leaving bookmark should-end-on-two)
   $ hg book four
   $ hg --config extensions.mq= strip 3
   saved backup bundle to * (glob)
 should-end-on-two should end up pointing to revision 2, as that's the
 tipmost surviving ancestor of the stripped revision.
   $ hg log --graph
   @  changeset:   3:9ba5f110a0b3
   |  branch:      test
   |  bookmark:    four
   |  tag:         tip
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     y
   |
   o  changeset:   2:db815d6d32e6
   |  bookmark:    should-end-on-two
   |  parent:      0:f7b1eb17ad24
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     2
   |
   | o  changeset:   1:925d80f479bb
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     1
   |
   o  changeset:   0:f7b1eb17ad24
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     0
   
-test non-linear update not clearing active bookmark
-
-  $ hg up 1
-  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
-  (leaving bookmark four)
-  $ hg book drop
-  $ hg up -C
-  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
-  (leaving bookmark drop)
-  1 other heads for branch "default"
-  $ hg sum
-  parent: 2:db815d6d32e6 
-   2
-  branch: default
-  bookmarks: should-end-on-two
-  commit: 2 unknown (clean)
-  update: 1 new changesets, 2 branch heads (merge)
-  phases: 4 draft
-  $ hg book
-     drop                      1:925d80f479bb
-     four                      3:9ba5f110a0b3
-     should-end-on-two         2:db815d6d32e6
-  $ hg book -d drop
-  $ hg up four
-  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
-  (activating bookmark four)
 
 no-op update doesn't deactive bookmarks
 
+  $ hg up four
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  (activating bookmark four)
   $ hg up
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg sum
   parent: 3:9ba5f110a0b3 tip
    y
   branch: test
   bookmarks: *four
   commit: 2 unknown (clean)
   update: (current)
   phases: 4 draft
 
 test clearing divergent bookmarks of linear ancestors
 
   $ hg bookmark Z -r 0
   $ hg bookmark Z@1 -r 1
   $ hg bookmark Z@2 -r 2
   $ hg bookmark Z@3 -r 3
   $ hg book
      Z                         0:f7b1eb17ad24
      Z@1                       1:925d80f479bb
      Z@2                       2:db815d6d32e6
      Z@3                       3:9ba5f110a0b3
    * four                      3:9ba5f110a0b3
      should-end-on-two         2:db815d6d32e6
   $ hg bookmark Z
   moving bookmark 'Z' forward from f7b1eb17ad24
   $ hg book
    * Z                         3:9ba5f110a0b3
      Z@1                       1:925d80f479bb
      four                      3:9ba5f110a0b3
      should-end-on-two         2:db815d6d32e6
 
 test clearing only a single divergent bookmark across branches
 
   $ hg book foo -r 1
   $ hg book foo@1 -r 0
   $ hg book foo@2 -r 2
   $ hg book foo@3 -r 3
   $ hg book foo -r foo@3
   $ hg book
    * Z                         3:9ba5f110a0b3
      Z@1                       1:925d80f479bb
      foo                       3:9ba5f110a0b3
      foo@1                     0:f7b1eb17ad24
      foo@2                     2:db815d6d32e6
      four                      3:9ba5f110a0b3
      should-end-on-two         2:db815d6d32e6
 
 pull --update works the same as pull && update (case #2)
 
 It is assumed that "hg pull" itself doesn't update current active
 bookmark ('Y' in tests below).
 
   $ hg pull -q ../cloned-bookmarks-update
   divergent bookmark Z stored as Z@2
 
 (pulling revision on another named branch with --update updates
 neither the working directory nor current active bookmark: "no-op"
 case)
 
   $ echo yy >> y
   $ hg commit -m yy
 
   $ hg -R ../cloned-bookmarks-update bookmarks | grep ' Y '
    * Y                         3:125c9a1d6df6
   $ hg -R ../cloned-bookmarks-update pull . --update
   pulling from .
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   divergent bookmark Z stored as Z@default
   adding remote bookmark foo
   adding remote bookmark four
   adding remote bookmark should-end-on-two
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R ../cloned-bookmarks-update parents -T "{rev}:{node|short}\n"
   3:125c9a1d6df6
   $ hg -R ../cloned-bookmarks-update bookmarks | grep ' Y '
    * Y                         3:125c9a1d6df6
 
 (pulling revision on current named/topological branch with --update
 updates the working directory and current active bookmark)
 
   $ hg update -C -q 125c9a1d6df6
   $ echo xx >> x
   $ hg commit -m xx
 
   $ hg -R ../cloned-bookmarks-update bookmarks | grep ' Y '
    * Y                         3:125c9a1d6df6
   $ hg -R ../cloned-bookmarks-update pull . --update
   pulling from .
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   divergent bookmark Z stored as Z@default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   updating bookmark Y
   $ hg -R ../cloned-bookmarks-update parents -T "{rev}:{node|short}\n"
   6:81dcce76aa0b
   $ hg -R ../cloned-bookmarks-update bookmarks | grep ' Y '
    * Y                         6:81dcce76aa0b

tests/test-largefiles-cache.t

@@ -1,238 +1,238 b''
 Create user cache directory
 
   $ USERCACHE=`pwd`/cache; export USERCACHE
   $ cat <<EOF >> ${HGRCPATH}
   > [extensions]
   > hgext.largefiles=
   > [largefiles]
   > usercache=${USERCACHE}
   > EOF
   $ mkdir -p ${USERCACHE}
 
 Create source repo, and commit adding largefile.
 
   $ hg init src
   $ cd src
   $ echo large > large
   $ hg add --large large
   $ hg commit -m 'add largefile'
   $ hg rm large
   $ hg commit -m 'branchhead without largefile' large
   $ hg up -qr 0
   $ rm large
   $ echo "0000000000000000000000000000000000000000" > .hglf/large
   $ hg commit -m 'commit missing file with corrupt standin' large
   abort: large: file not found!
   [255]
   $ hg up -Cqr 0
   $ cd ..
 
 Discard all cached largefiles in USERCACHE
 
   $ rm -rf ${USERCACHE}
 
 Create mirror repo, and pull from source without largefile:
 "pull" is used instead of "clone" for suppression of (1) updating to
 tip (= caching largefile from source repo), and (2) recording source
 repo as "default" path in .hg/hgrc.
 
   $ hg init mirror
   $ cd mirror
   $ hg pull ../src
   pulling from ../src
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 2 changesets with 1 changes to 1 files
   (run 'hg update' to get a working copy)
 
 Update working directory to "tip", which requires largefile("large"),
 but there is no cache file for it.  So, hg must treat it as
 "missing"(!) file.
 
   $ hg update -r0
   getting changed largefiles
   large: largefile 7f7097b041ccf68cc5561e9600da4655d21c6d18 not available from file:/*/$TESTTMP/mirror (glob)
   0 largefiles updated, 0 removed
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg status
   ! large
 
 Update working directory to null: this cleanup .hg/largefiles/dirstate
 
   $ hg update null
   getting changed largefiles
   0 largefiles updated, 0 removed
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
 
 Update working directory to tip, again.
 
   $ hg update -r0
   getting changed largefiles
   large: largefile 7f7097b041ccf68cc5561e9600da4655d21c6d18 not available from file:/*/$TESTTMP/mirror (glob)
   0 largefiles updated, 0 removed
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg status
   ! large
   $ cd ..
 
 Verify that largefiles from pulled branchheads are fetched, also to an empty repo
 
   $ hg init mirror2
   $ hg -R mirror2 pull src -r0
   pulling from src
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   (run 'hg update' to get a working copy)
 
 #if unix-permissions
 
 Portable way to print file permissions:
 
   $ cat > ls-l.py <<EOF
   > #!/usr/bin/env python
   > import sys, os
   > path = sys.argv[1]
   > print '%03o' % (os.lstat(path).st_mode & 0777)
   > EOF
   $ chmod +x ls-l.py
 
 Test that files in .hg/largefiles inherit mode from .hg/store, not
 from file in working copy:
 
   $ cd src
   $ chmod 750 .hg/store
   $ chmod 660 large
   $ echo change >> large
   $ hg commit -m change
   created new head
   $ ../ls-l.py .hg/largefiles/e151b474069de4ca6898f67ce2f2a7263adf8fea
   640
 
 Test permission of with files in .hg/largefiles created by update:
 
   $ cd ../mirror
   $ rm -r "$USERCACHE" .hg/largefiles # avoid links
   $ chmod 750 .hg/store
   $ hg pull ../src --update -q
   $ ../ls-l.py .hg/largefiles/e151b474069de4ca6898f67ce2f2a7263adf8fea
   640
 
 Test permission of files created by push:
 
   $ hg serve -R ../src -d -p $HGPORT --pid-file hg.pid \
   >          --config "web.allow_push=*" --config web.push_ssl=no
   $ cat hg.pid >> $DAEMON_PIDS
 
   $ echo change >> large
   $ hg commit -m change
 
   $ rm -r "$USERCACHE"
 
   $ hg push -q http://localhost:$HGPORT/
 
   $ ../ls-l.py ../src/.hg/largefiles/b734e14a0971e370408ab9bce8d56d8485e368a9
   640
 
   $ cd ..
 
 #endif
 
 Test issue 4053 (remove --after on a deleted, uncommitted file shouldn't say
 it is missing, but a remove on a nonexistent unknown file still should.  Same
 for a forget.)
 
   $ cd src
   $ touch x
   $ hg add x
   $ mv x y
   $ hg remove -A x y ENOENT
   ENOENT: * (glob)
   not removing y: file is untracked
   [1]
   $ hg add y
   $ mv y z
   $ hg forget y z ENOENT
   ENOENT: * (glob)
   not removing z: file is already untracked
   [1]
 
 Largefiles are accessible from the share's store
   $ cd ..
   $ hg share -q src share_dst --config extensions.share=
   $ hg -R share_dst update -r0
   getting changed largefiles
   1 largefiles updated, 0 removed
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ echo modified > share_dst/large
   $ hg -R share_dst ci -m modified
   created new head
 
 Only dirstate is in the local store for the share, and the largefile is in the
 share source's local store.  Avoid the extra largefiles added in the unix
 conditional above.
   $ hash=`hg -R share_dst cat share_dst/.hglf/large`
   $ echo $hash
   e2fb5f2139d086ded2cb600d5a91a196e76bf020
 
   $ find share_dst/.hg/largefiles/* | sort
   share_dst/.hg/largefiles/dirstate
 
   $ find src/.hg/largefiles/* | egrep "(dirstate|$hash)" | sort
   src/.hg/largefiles/dirstate
   src/.hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020
 
 Inject corruption into the largefiles store and see how update handles that:
 
   $ cd src
-  $ hg up -qC
+  $ hg up -qC tip
   $ cat large
   modified
   $ rm large
   $ cat .hglf/large
   e2fb5f2139d086ded2cb600d5a91a196e76bf020
   $ mv .hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020 ..
   $ echo corruption > .hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020
   $ hg up -C
   getting changed largefiles
   large: data corruption in $TESTTMP/src/.hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020 with hash 6a7bb2556144babe3899b25e5428123735bb1e27 (glob)
   0 largefiles updated, 0 removed
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   2 other heads for branch "default"
   $ hg st
   ! large
   ? z
   $ rm .hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020
 
 #if serve
 
 Test coverage of error handling from putlfile:
 
   $ mkdir $TESTTMP/mirrorcache
   $ hg serve -R ../mirror -d -p $HGPORT1 --pid-file hg.pid --config largefiles.usercache=$TESTTMP/mirrorcache
   $ cat hg.pid >> $DAEMON_PIDS
 
   $ hg push http://localhost:$HGPORT1 -f --config files.usercache=nocache
   pushing to http://localhost:$HGPORT1/
   searching for changes
   abort: remotestore: could not open file $TESTTMP/src/.hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020: HTTP Error 403: ssl required
   [255]
 
   $ rm .hg/largefiles/e2fb5f2139d086ded2cb600d5a91a196e76bf020
 
 Test coverage of 'missing from store':
 
   $ hg serve -R ../mirror -d -p $HGPORT2 --pid-file hg.pid --config largefiles.usercache=$TESTTMP/mirrorcache --config "web.allow_push=*" --config web.push_ssl=no
   $ cat hg.pid >> $DAEMON_PIDS
 
   $ hg push http://localhost:$HGPORT2 -f --config largefiles.usercache=nocache
   pushing to http://localhost:$HGPORT2/
   searching for changes
   abort: largefile e2fb5f2139d086ded2cb600d5a91a196e76bf020 missing from store (needs to be uploaded)
   [255]
 
 #endif

tests/test-merge-criss-cross.t

@@ -1,352 +1,352 b''
 Criss cross merging
 
   $ hg init criss-cross
   $ cd criss-cross
   $ echo '0 base' > f1
   $ echo '0 base' > f2
   $ hg ci -Aqm '0 base'
 
   $ echo '1 first change' > f1
   $ hg ci -m '1 first change f1'
 
   $ hg up -qr0
   $ echo '2 first change' > f2
   $ hg ci -qm '2 first change f2'
 
   $ hg merge -qr 1
   $ hg ci -m '3 merge'
 
   $ hg up -qr2
   $ hg merge -qr1
   $ hg ci -qm '4 merge'
 
   $ echo '5 second change' > f1
   $ hg ci -m '5 second change f1'
 
   $ hg up -r3
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo '6 second change' > f2
   $ hg ci -m '6 second change f2'
 
   $ hg log -G
   @  changeset:   6:3b08d01b0ab5
   |  tag:         tip
   |  parent:      3:cf89f02107e5
   |  user:        test
   |  date:        Thu Jan 01 00:00:00 1970 +0000
   |  summary:     6 second change f2
   |
   | o  changeset:   5:adfe50279922
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     5 second change f1
   | |
   | o    changeset:   4:7d3e55501ae6
   | |\   parent:      2:40663881a6dd
   | | |  parent:      1:0f6b37dbe527
   | | |  user:        test
   | | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | | |  summary:     4 merge
   | | |
   o---+  changeset:   3:cf89f02107e5
   | | |  parent:      2:40663881a6dd
   |/ /   parent:      1:0f6b37dbe527
   | |    user:        test
   | |    date:        Thu Jan 01 00:00:00 1970 +0000
   | |    summary:     3 merge
   | |
   | o  changeset:   2:40663881a6dd
   | |  parent:      0:40494bf2444c
   | |  user:        test
   | |  date:        Thu Jan 01 00:00:00 1970 +0000
   | |  summary:     2 first change f2
   | |
   o |  changeset:   1:0f6b37dbe527
   |/   user:        test
   |    date:        Thu Jan 01 00:00:00 1970 +0000
   |    summary:     1 first change f1
   |
   o  changeset:   0:40494bf2444c
      user:        test
      date:        Thu Jan 01 00:00:00 1970 +0000
      summary:     0 base
   
 
   $ hg merge -v --debug --tool internal:dump 5 --config merge.preferancestor='!'
   note: using 0f6b37dbe527 as ancestor of 3b08d01b0ab5 and adfe50279922
         alternatively, use --config merge.preferancestor=40663881a6dd
     searching for copies back to rev 3
   resolving manifests
    branchmerge: True, force: False, partial: False
    ancestor: 0f6b37dbe527, local: 3b08d01b0ab5+, remote: adfe50279922
    preserving f2 for resolve of f2
    f1: remote is newer -> g
   getting f1
    f2: versions differ -> m (premerge)
   picked tool ':dump' for f2 (binary False symlink False changedelete False)
   merging f2
   my f2@3b08d01b0ab5+ other f2@adfe50279922 ancestor f2@0f6b37dbe527
    f2: versions differ -> m (merge)
   picked tool ':dump' for f2 (binary False symlink False changedelete False)
   my f2@3b08d01b0ab5+ other f2@adfe50279922 ancestor f2@0f6b37dbe527
   1 files updated, 0 files merged, 0 files removed, 1 files unresolved
   use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
   [1]
 
   $ head *
   ==> f1 <==
   5 second change
   
   ==> f2 <==
   6 second change
   
   ==> f2.base <==
   0 base
   
   ==> f2.local <==
   6 second change
   
   ==> f2.orig <==
   6 second change
   
   ==> f2.other <==
   2 first change
 
   $ hg up -qC .
   $ hg merge -v --tool internal:dump 5 --config merge.preferancestor="null 40663881 3b08d"
   note: using 40663881a6dd as ancestor of 3b08d01b0ab5 and adfe50279922
         alternatively, use --config merge.preferancestor=0f6b37dbe527
   resolving manifests
   merging f1
   0 files updated, 0 files merged, 0 files removed, 1 files unresolved
   use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
   [1]
 
 Redo merge with merge.preferancestor="*" to enable bid merge
 
   $ rm f*
   $ hg up -qC .
   $ hg merge -v --debug --tool internal:dump 5 --config merge.preferancestor="*"
   note: merging 3b08d01b0ab5+ and adfe50279922 using bids from ancestors 0f6b37dbe527 and 40663881a6dd
   
   calculating bids for ancestor 0f6b37dbe527
     searching for copies back to rev 3
   resolving manifests
    branchmerge: True, force: False, partial: False
    ancestor: 0f6b37dbe527, local: 3b08d01b0ab5+, remote: adfe50279922
    f1: remote is newer -> g
    f2: versions differ -> m
   
   calculating bids for ancestor 40663881a6dd
     searching for copies back to rev 3
   resolving manifests
    branchmerge: True, force: False, partial: False
    ancestor: 40663881a6dd, local: 3b08d01b0ab5+, remote: adfe50279922
    f1: versions differ -> m
    f2: remote unchanged -> k
   
   auction for merging merge bids
    f1: picking 'get' action
    f2: picking 'keep' action
   end of auction
   
    f1: remote is newer -> g
   getting f1
    f2: remote unchanged -> k
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
 
   $ head *
   ==> f1 <==
   5 second change
   
   ==> f2 <==
   6 second change
 
 
 The other way around:
 
   $ hg up -C -r5
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg merge -v --debug --config merge.preferancestor="*"
   note: merging adfe50279922+ and 3b08d01b0ab5 using bids from ancestors 0f6b37dbe527 and 40663881a6dd
   
   calculating bids for ancestor 0f6b37dbe527
     searching for copies back to rev 3
   resolving manifests
    branchmerge: True, force: False, partial: False
    ancestor: 0f6b37dbe527, local: adfe50279922+, remote: 3b08d01b0ab5
    f1: remote unchanged -> k
    f2: versions differ -> m
   
   calculating bids for ancestor 40663881a6dd
     searching for copies back to rev 3
   resolving manifests
    branchmerge: True, force: False, partial: False
    ancestor: 40663881a6dd, local: adfe50279922+, remote: 3b08d01b0ab5
    f1: versions differ -> m
    f2: remote is newer -> g
   
   auction for merging merge bids
    f1: picking 'keep' action
    f2: picking 'get' action
   end of auction
   
    f2: remote is newer -> g
   getting f2
    f1: remote unchanged -> k
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
 
   $ head *
   ==> f1 <==
   5 second change
   
   ==> f2 <==
   6 second change
 
 Verify how the output looks and and how verbose it is:
 
   $ hg up -qC
   $ hg merge
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
 
-  $ hg up -qC
+  $ hg up -qC tip
   $ hg merge -v
   note: merging 3b08d01b0ab5+ and adfe50279922 using bids from ancestors 0f6b37dbe527 and 40663881a6dd
   
   calculating bids for ancestor 0f6b37dbe527
   resolving manifests
   
   calculating bids for ancestor 40663881a6dd
   resolving manifests
   
   auction for merging merge bids
    f1: picking 'get' action
    f2: picking 'keep' action
   end of auction
   
   getting f1
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
 
   $ hg up -qC
   $ hg merge -v --debug --config merge.preferancestor="*"
   note: merging 3b08d01b0ab5+ and adfe50279922 using bids from ancestors 0f6b37dbe527 and 40663881a6dd
   
   calculating bids for ancestor 0f6b37dbe527
     searching for copies back to rev 3
   resolving manifests
    branchmerge: True, force: False, partial: False
    ancestor: 0f6b37dbe527, local: 3b08d01b0ab5+, remote: adfe50279922
    f1: remote is newer -> g
    f2: versions differ -> m
   
   calculating bids for ancestor 40663881a6dd
     searching for copies back to rev 3
   resolving manifests
    branchmerge: True, force: False, partial: False
    ancestor: 40663881a6dd, local: 3b08d01b0ab5+, remote: adfe50279922
    f1: versions differ -> m
    f2: remote unchanged -> k
   
   auction for merging merge bids
    f1: picking 'get' action
    f2: picking 'keep' action
   end of auction
   
    f1: remote is newer -> g
   getting f1
    f2: remote unchanged -> k
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
 
   $ cd ..
 
 http://stackoverflow.com/questions/9350005/how-do-i-specify-a-merge-base-to-use-in-a-hg-merge/9430810
 
   $ hg init ancestor-merging
   $ cd ancestor-merging
   $ echo a > x
   $ hg commit -A -m a x
   $ hg update -q 0
   $ echo b >> x
   $ hg commit -m b
   $ hg update -q 0
   $ echo c >> x
   $ hg commit -qm c
   $ hg update -q 1
   $ hg merge -q --tool internal:local 2
   $ echo c >> x
   $ hg commit -m bc
   $ hg update -q 2
   $ hg merge -q --tool internal:local 1
   $ echo b >> x
   $ hg commit -qm cb
 
   $ hg merge --config merge.preferancestor='!'
   note: using 70008a2163f6 as ancestor of 0d355fdef312 and 4b8b546a3eef
         alternatively, use --config merge.preferancestor=b211bbc6eb3c
   merging x
   0 files updated, 1 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ cat x
   a
   c
   b
   c
 
   $ hg up -qC .
 
   $ hg merge --config merge.preferancestor=b211bbc6eb3c
   note: using b211bbc6eb3c as ancestor of 0d355fdef312 and 4b8b546a3eef
         alternatively, use --config merge.preferancestor=70008a2163f6
   merging x
   0 files updated, 1 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ cat x
   a
   b
   c
   b
 
   $ hg up -qC .
 
   $ hg merge -v --config merge.preferancestor="*"
   note: merging 0d355fdef312+ and 4b8b546a3eef using bids from ancestors 70008a2163f6 and b211bbc6eb3c
   
   calculating bids for ancestor 70008a2163f6
   resolving manifests
   
   calculating bids for ancestor b211bbc6eb3c
   resolving manifests
   
   auction for merging merge bids
    x: multiple bids for merge action:
     versions differ -> m
     versions differ -> m
    x: ambiguous merge - picked m action
   end of auction
   
   merging x
   0 files updated, 1 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ cat x
   a
   c
   b
   c
 
 Verify that the old context ancestor works with / despite preferancestor:
 
   $ hg log -r 'ancestor(head())' --config merge.preferancestor=1 -T '{rev}\n'
   1
   $ hg log -r 'ancestor(head())' --config merge.preferancestor=2 -T '{rev}\n'
   2
   $ hg log -r 'ancestor(head())' --config merge.preferancestor=3 -T '{rev}\n'
   1
   $ hg log -r 'ancestor(head())' --config merge.preferancestor='1337 * - 2' -T '{rev}\n'
   2
 
   $ cd ..

tests/test-merge5.t

@@ -1,41 +1,36 b''
   $ hg init
   $ echo This is file a1 > a
   $ echo This is file b1 > b
   $ hg add a b
   $ hg commit -m "commit #0"
   $ echo This is file b22 > b
   $ hg commit -m "comment #1"
   $ hg update 0
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ rm b
   $ hg commit -A -m "comment #2"
   removing b
   created new head
   $ hg update 1
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
-  $ hg update
-  abort: not a linear update
-  (merge or update --check to force update)
-  [255]
   $ rm b
-  $ hg update -c
+  $ hg update -c 2
   abort: uncommitted changes
   [255]
   $ hg revert b
-  $ hg update -c
+  $ hg update -c 2
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
-  1 other heads for branch "default"
   $ mv a c
 
 Should abort:
 
   $ hg update 1
   abort: uncommitted changes
   (commit or update --clean to discard changes)
   [255]
   $ mv c a
 
 Should succeed:
 
   $ hg update 1
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved

tests/test-pull-update.t

@@ -1,66 +1,64 b''
   $ hg init t
   $ cd t
   $ echo 1 > foo
   $ hg ci -Am m
   adding foo
 
   $ cd ..
   $ hg clone t tt
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd tt
   $ echo 1.1 > foo
   $ hg ci -Am m
 
   $ cd ../t
   $ echo 1.2 > foo
   $ hg ci -Am m
 
-Should not update:
+Should not update to the other topological branch:
 
   $ hg pull -u ../tt
   pulling from ../tt
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (+1 heads)
-  abort: not updating: not a linear update
-  (merge or update --check to force update)
-  [255]
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  1 other heads for branch "default"
 
   $ cd ../tt
 
-Should not update:
+Should not update to the other branch:
 
   $ hg pull -u ../t
   pulling from ../t
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (+1 heads)
-  abort: not updating: not a linear update
-  (merge or update --check to force update)
-  [255]
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  1 other heads for branch "default"
 
   $ HGMERGE=true hg merge
   merging foo
   0 files updated, 1 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ hg ci -mm
 
   $ cd ../t
 
 Should work:
 
   $ hg pull -u ../tt
   pulling from ../tt
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (-1 heads)
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
   $ cd ..

tests/test-up-local-change.t

@@ -1,231 +1,230 b''
   $ HGMERGE=true; export HGMERGE
 
   $ hg init r1
   $ cd r1
   $ echo a > a
   $ hg addremove
   adding a
   $ hg commit -m "1"
 
   $ hg clone . ../r2
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd ../r2
   $ hg up
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo abc > a
   $ hg diff --nodates
   diff -r c19d34741b0a a
   --- a/a
   +++ b/a
   @@ -1,1 +1,1 @@
   -a
   +abc
 
   $ cd ../r1
   $ echo b > b
   $ echo a2 > a
   $ hg addremove
   adding b
   $ hg commit -m "2"
 
   $ cd ../r2
   $ hg -q pull ../r1
   $ hg status
   M a
   $ hg parents
   changeset:   0:c19d34741b0a
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1
   
   $ hg --debug up
     searching for copies back to rev 1
     unmatched files in other:
      b
   resolving manifests
    branchmerge: False, force: False, partial: False
    ancestor: c19d34741b0a, local: c19d34741b0a+, remote: 1e71731e6fbb
    preserving a for resolve of a
    b: remote created -> g
   getting b
    a: versions differ -> m (premerge)
   picked tool 'true' for a (binary False symlink False changedelete False)
   merging a
   my a@c19d34741b0a+ other a@1e71731e6fbb ancestor a@c19d34741b0a
    a: versions differ -> m (merge)
   picked tool 'true' for a (binary False symlink False changedelete False)
   my a@c19d34741b0a+ other a@1e71731e6fbb ancestor a@c19d34741b0a
   launching merge tool: true *$TESTTMP/r2/a* * * (glob)
   merge tool returned: 0
   1 files updated, 1 files merged, 0 files removed, 0 files unresolved
   $ hg parents
   changeset:   1:1e71731e6fbb
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     2
   
   $ hg --debug up 0
   resolving manifests
    branchmerge: False, force: False, partial: False
    ancestor: 1e71731e6fbb, local: 1e71731e6fbb+, remote: c19d34741b0a
    preserving a for resolve of a
    b: other deleted -> r
   removing b
    a: versions differ -> m (premerge)
   picked tool 'true' for a (binary False symlink False changedelete False)
   merging a
   my a@1e71731e6fbb+ other a@c19d34741b0a ancestor a@1e71731e6fbb
    a: versions differ -> m (merge)
   picked tool 'true' for a (binary False symlink False changedelete False)
   my a@1e71731e6fbb+ other a@c19d34741b0a ancestor a@1e71731e6fbb
   launching merge tool: true *$TESTTMP/r2/a* * * (glob)
   merge tool returned: 0
   0 files updated, 1 files merged, 1 files removed, 0 files unresolved
   $ hg parents
   changeset:   0:c19d34741b0a
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1
   
   $ hg parents
   changeset:   0:c19d34741b0a
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     1
   
   $ hg --debug up
     searching for copies back to rev 1
     unmatched files in other:
      b
   resolving manifests
    branchmerge: False, force: False, partial: False
    ancestor: c19d34741b0a, local: c19d34741b0a+, remote: 1e71731e6fbb
    preserving a for resolve of a
    b: remote created -> g
   getting b
    a: versions differ -> m (premerge)
   picked tool 'true' for a (binary False symlink False changedelete False)
   merging a
   my a@c19d34741b0a+ other a@1e71731e6fbb ancestor a@c19d34741b0a
    a: versions differ -> m (merge)
   picked tool 'true' for a (binary False symlink False changedelete False)
   my a@c19d34741b0a+ other a@1e71731e6fbb ancestor a@c19d34741b0a
   launching merge tool: true *$TESTTMP/r2/a* * * (glob)
   merge tool returned: 0
   1 files updated, 1 files merged, 0 files removed, 0 files unresolved
   $ hg parents
   changeset:   1:1e71731e6fbb
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     2
   
   $ hg -v history
   changeset:   1:1e71731e6fbb
   tag:         tip
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   files:       a b
   description:
   2
   
   
   changeset:   0:c19d34741b0a
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   files:       a
   description:
   1
   
   
   $ hg diff --nodates
   diff -r 1e71731e6fbb a
   --- a/a
   +++ b/a
   @@ -1,1 +1,1 @@
   -a2
   +abc
 
 
 create a second head
 
   $ cd ../r1
   $ hg up 0
   1 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ echo b2 > b
   $ echo a3 > a
   $ hg addremove
   adding b
   $ hg commit -m "3"
   created new head
 
   $ cd ../r2
   $ hg -q pull ../r1
   $ hg status
   M a
   $ hg parents
   changeset:   1:1e71731e6fbb
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     2
   
   $ hg --debug up
-  abort: uncommitted changes
-  (commit and merge, or update --clean to discard changes)
-  [255]
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  1 other heads for branch "default"
 
 test conflicting untracked files
 
   $ hg up -qC 0
   $ echo untracked > b
   $ hg st
   ? b
   $ hg up 1
   b: untracked file differs
   abort: untracked files in working directory differ from files in requested revision
   [255]
   $ rm b
 
 test conflicting untracked ignored file
 
   $ hg up -qC 0
   $ echo ignored > .hgignore
   $ hg add .hgignore
   $ hg ci -m 'add .hgignore'
   created new head
   $ echo ignored > ignored
   $ hg add ignored
   $ hg ci -m 'add ignored file'
 
   $ hg up -q 'desc("add .hgignore")'
   $ echo untracked > ignored
   $ hg st
   $ hg up 'desc("add ignored file")'
   ignored: untracked file differs
   abort: untracked files in working directory differ from files in requested revision
   [255]
 
 test a local add
 
   $ cd ..
   $ hg init a
   $ hg init b
   $ echo a > a/a
   $ echo a > b/a
   $ hg --cwd a commit -A -m a
   adding a
   $ cd b
   $ hg add a
   $ hg pull -u ../a
   pulling from ../a
   requesting all changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg st
 
   $ cd ..

tests/test-update-branches.t

@@ -1,268 +1,268 b''
 # Construct the following history tree:
 #
 # @  5:e1bb631146ca  b1
 # |
 # o  4:a4fdb3b883c4 0:b608b9236435  b1
 # |
 # | o  3:4b57d2520816 1:44592833ba9f
 # | |
 # | | o  2:063f31070f65
 # | |/
 # | o  1:44592833ba9f
 # |/
 # o  0:b608b9236435
 
   $ mkdir b1
   $ cd b1
   $ hg init
   $ echo foo > foo
   $ echo zero > a
   $ hg init sub
   $ echo suba > sub/suba
   $ hg --cwd sub ci -Am addsuba
   adding suba
   $ echo 'sub = sub' > .hgsub
   $ hg ci -qAm0
   $ echo one > a ; hg ci -m1
   $ echo two > a ; hg ci -m2
   $ hg up -q 1
   $ echo three > a ; hg ci -qm3
   $ hg up -q 0
   $ hg branch -q b1
   $ echo four > a ; hg ci -qm4
   $ echo five > a ; hg ci -qm5
 
 Initial repo state:
 
   $ hg log -G --template '{rev}:{node|short} {parents} {branches}\n'
   @  5:ff252e8273df  b1
   |
   o  4:d047485b3896 0:60829823a42a  b1
   |
   | o  3:6efa171f091b 1:0786582aa4b1
   | |
   | | o  2:bd10386d478c
   | |/
   | o  1:0786582aa4b1
   |/
   o  0:60829823a42a
   
 
 Make sure update doesn't assume b1 is a repository if invoked from outside:
 
   $ cd ..
   $ hg update b1
   abort: no repository found in '$TESTTMP' (.hg not found)!
   [255]
   $ cd b1
 
 Test helper functions:
 
   $ revtest () {
   >     msg=$1
   >     dirtyflag=$2   # 'clean', 'dirty' or 'dirtysub'
   >     startrev=$3
   >     targetrev=$4
   >     opt=$5
   >     hg up -qC $startrev
   >     test $dirtyflag = dirty && echo dirty > foo
   >     test $dirtyflag = dirtysub && echo dirty > sub/suba
   >     hg up $opt $targetrev
   >     hg parent --template 'parent={rev}\n'
   >     hg stat -S
   > }
 
   $ norevtest () {
   >     msg=$1
   >     dirtyflag=$2   # 'clean', 'dirty' or 'dirtysub'
   >     startrev=$3
   >     opt=$4
   >     hg up -qC $startrev
   >     test $dirtyflag = dirty && echo dirty > foo
   >     test $dirtyflag = dirtysub && echo dirty > sub/suba
   >     hg up $opt
   >     hg parent --template 'parent={rev}\n'
   >     hg stat -S
   > }
 
 Test cases are documented in a table in the update function of merge.py.
 Cases are run as shown in that table, row by row.
 
   $ norevtest 'none clean linear' clean 4
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   parent=5
 
   $ norevtest 'none clean same'   clean 2
-  abort: not a linear update
-  (merge or update --check to force update)
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  1 other heads for branch "default"
   parent=2
 
 
   $ revtest 'none clean linear' clean 1 2
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   parent=2
 
   $ revtest 'none clean same'   clean 2 3
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   parent=3
 
   $ revtest 'none clean cross'  clean 3 4
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   parent=4
 
 
   $ revtest 'none dirty linear' dirty 1 2
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   parent=2
   M foo
 
   $ revtest 'none dirtysub linear' dirtysub 1 2
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   parent=2
   M sub/suba
 
   $ revtest 'none dirty same'   dirty 2 3
   abort: uncommitted changes
   (commit or update --clean to discard changes)
   parent=2
   M foo
 
   $ revtest 'none dirtysub same'   dirtysub 2 3
   abort: uncommitted changes
   (commit or update --clean to discard changes)
   parent=2
   M sub/suba
 
   $ revtest 'none dirty cross'  dirty 3 4
   abort: uncommitted changes
   (commit or update --clean to discard changes)
   parent=3
   M foo
 
   $ norevtest 'none dirty cross'  dirty 2
-  abort: uncommitted changes
-  (commit and merge, or update --clean to discard changes)
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  1 other heads for branch "default"
   parent=2
   M foo
 
   $ revtest 'none dirtysub cross'  dirtysub 3 4
   abort: uncommitted changes
   (commit or update --clean to discard changes)
   parent=3
   M sub/suba
 
   $ revtest '-C dirty linear'   dirty 1 2 -C
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   parent=2
 
   $ revtest '-c dirty linear'   dirty 1 2 -c
   abort: uncommitted changes
   parent=1
   M foo
 
   $ revtest '-c dirtysub linear'   dirtysub 1 2 -c
   abort: uncommitted changes in subrepository 'sub'
   parent=1
   M sub/suba
 
   $ norevtest '-c clean same'   clean 2 -c
-  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
+  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
   1 other heads for branch "default"
-  parent=3
+  parent=2
 
   $ revtest '-cC dirty linear'  dirty 1 2 -cC
   abort: cannot specify both -c/--check and -C/--clean
   parent=1
   M foo
 
 Test obsolescence behavior
 ---------------------------------------------------------------------
 
 successors should be taken in account when checking head destination
 
   $ cat << EOF >> $HGRCPATH
   > [ui]
   > logtemplate={rev}:{node|short} {desc|firstline}
   > [experimental]
   > evolution=createmarkers
   > EOF
 
 Test no-argument update to a successor of an obsoleted changeset
 
   $ hg log -G
   o  5:ff252e8273df 5
   |
   o  4:d047485b3896 4
   |
   | o  3:6efa171f091b 3
   | |
   | | o  2:bd10386d478c 2
   | |/
   | @  1:0786582aa4b1 1
   |/
   o  0:60829823a42a 0
   
   $ hg book bm -r 3
   $ hg status
   M foo
 
 We add simple obsolescence marker between 3 and 4 (indirect successors)
 
   $ hg id --debug -i -r 3
   6efa171f091b00a3c35edc15d48c52a498929953
   $ hg id --debug -i -r 4
   d047485b3896813b2a624e86201983520f003206
   $ hg debugobsolete 6efa171f091b00a3c35edc15d48c52a498929953 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
   $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa d047485b3896813b2a624e86201983520f003206
 
 Test that 5 is detected as a valid destination from 3 and also accepts moving
 the bookmark (issue4015)
 
   $ hg up --quiet --hidden 3
   $ hg up 5
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg book bm
   moving bookmark 'bm' forward from 6efa171f091b
   $ hg bookmarks
    * bm                        5:ff252e8273df
 
 Test that 4 is detected as the no-argument destination from 3 and also moves
 the bookmark with it
   $ hg up --quiet 0          # we should be able to update to 3 directly
   $ hg up --quiet --hidden 3 # but not implemented yet.
   $ hg book -f bm
   $ hg up
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   updating bookmark bm
   $ hg book
    * bm                        4:d047485b3896
 
 Test that 5 is detected as a valid destination from 1
   $ hg up --quiet 0          # we should be able to update to 3 directly
   $ hg up --quiet --hidden 3 # but not implemented yet.
   $ hg up 5
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 Test that 5 is not detected as a valid destination from 2
   $ hg up --quiet 0
   $ hg up --quiet 2
   $ hg up 5
   abort: uncommitted changes
   (commit or update --clean to discard changes)
   [255]
 
 Test that we don't crash when updating from a pruned changeset (i.e. has no
 successors). Behavior should probably be that we update to the first
 non-obsolete parent but that will be decided later.
   $ hg id --debug -r 2
   bd10386d478cd5a9faf2e604114c8e6da62d3889
   $ hg up --quiet 0
   $ hg up --quiet 2
   $ hg debugobsolete bd10386d478cd5a9faf2e604114c8e6da62d3889
   $ hg up
   0 files updated, 0 files merged, 0 files removed, 0 files unresolved
 
 Test experimental revset support
 
   $ hg log -r '_destupdate()'
   2:bd10386d478c 2 (no-eol)