upgrade: extract code in its own module

Given about 2/3 or 'mercurial.repair' is now about repository upgrade, I think
it is fair to move it into its own module.

An expected benefit is the ability to drop the 'upgrade' prefix of many
functions. This will be done in coming changesets.

mercurial/debugcommands.py

@@ -62,6 +62,7 from . import (
     streamclone,
     templater,
     treediscovery,
+    upgrade,
     util,
     vfs as vfsmod,
 )
@@ -2072,7 +2073,7 def debugupgraderepo(ui, repo, run=False
     should complete almost instantaneously and the chances of a consumer being
     unable to access the repository should be low.
     """
-    return repair.upgraderepo(ui, repo, run=run, optimize=optimize)
+    return upgrade.upgraderepo(ui, repo, run=run, optimize=optimize)
 
 @command('debugwalk', commands.walkopts, _('[OPTION]... [FILE]...'),
          inferrepo=True)

mercurial/repair.py

@@ -10,23 +10,16 from __future__ import absolute_import
 
 import errno
 import hashlib
-import stat
-import tempfile
 
 from .i18n import _
 from .node import short
 from . import (
     bundle2,
     changegroup,
-    changelog,
     error,
     exchange,
-    manifest,
     obsolete,
-    revlog,
-    scmutil,
     util,
-    vfs as vfsmod,
 )
 
 def _bundle(repo, bases, heads, node, suffix, compress=True):
@@ -359,738 +352,3 def deleteobsmarkers(obsstore, indices):
         newobsstorefile.write(bytes)
     newobsstorefile.close()
     return n
-
-def upgraderequiredsourcerequirements(repo):
-    """Obtain requirements required to be present to upgrade a repo.
-
-    An upgrade will not be allowed if the repository doesn't have the
-    requirements returned by this function.
-    """
-    return set([
-        # Introduced in Mercurial 0.9.2.
-        'revlogv1',
-        # Introduced in Mercurial 0.9.2.
-        'store',
-    ])
-
-def upgradeblocksourcerequirements(repo):
-    """Obtain requirements that will prevent an upgrade from occurring.
-
-    An upgrade cannot be performed if the source repository contains a
-    requirements in the returned set.
-    """
-    return set([
-        # The upgrade code does not yet support these experimental features.
-        # This is an artificial limitation.
-        'manifestv2',
-        'treemanifest',
-        # This was a precursor to generaldelta and was never enabled by default.
-        # It should (hopefully) not exist in the wild.
-        'parentdelta',
-        # Upgrade should operate on the actual store, not the shared link.
-        'shared',
-    ])
-
-def upgradesupportremovedrequirements(repo):
-    """Obtain requirements that can be removed during an upgrade.
-
-    If an upgrade were to create a repository that dropped a requirement,
-    the dropped requirement must appear in the returned set for the upgrade
-    to be allowed.
-    """
-    return set()
-
-def upgradesupporteddestrequirements(repo):
-    """Obtain requirements that upgrade supports in the destination.
-
-    If the result of the upgrade would create requirements not in this set,
-    the upgrade is disallowed.
-
-    Extensions should monkeypatch this to add their custom requirements.
-    """
-    return set([
-        'dotencode',
-        'fncache',
-        'generaldelta',
-        'revlogv1',
-        'store',
-    ])
-
-def upgradeallowednewrequirements(repo):
-    """Obtain requirements that can be added to a repository during upgrade.
-
-    This is used to disallow proposed requirements from being added when
-    they weren't present before.
-
-    We use a list of allowed requirement additions instead of a list of known
-    bad additions because the whitelist approach is safer and will prevent
-    future, unknown requirements from accidentally being added.
-    """
-    return set([
-        'dotencode',
-        'fncache',
-        'generaldelta',
-    ])
-
-deficiency = 'deficiency'
-optimisation = 'optimization'
-
-class upgradeimprovement(object):
-    """Represents an improvement that can be made as part of an upgrade.
-
-    The following attributes are defined on each instance:
-
-    name
-       Machine-readable string uniquely identifying this improvement. It
-       will be mapped to an action later in the upgrade process.
-
-    type
-       Either ``deficiency`` or ``optimisation``. A deficiency is an obvious
-       problem. An optimization is an action (sometimes optional) that
-       can be taken to further improve the state of the repository.
-
-    description
-       Message intended for humans explaining the improvement in more detail,
-       including the implications of it. For ``deficiency`` types, should be
-       worded in the present tense. For ``optimisation`` types, should be
-       worded in the future tense.
-
-    upgrademessage
-       Message intended for humans explaining what an upgrade addressing this
-       issue will do. Should be worded in the future tense.
-
-    fromdefault (``deficiency`` types only)
-       Boolean indicating whether the current (deficient) state deviates
-       from Mercurial's default configuration.
-
-    fromconfig (``deficiency`` types only)
-       Boolean indicating whether the current (deficient) state deviates
-       from the current Mercurial configuration.
-    """
-    def __init__(self, name, type, description, upgrademessage, **kwargs):
-        self.name = name
-        self.type = type
-        self.description = description
-        self.upgrademessage = upgrademessage
-
-        for k, v in kwargs.items():
-            setattr(self, k, v)
-
-def upgradefindimprovements(repo):
-    """Determine improvements that can be made to the repo during upgrade.
-
-    Returns a list of ``upgradeimprovement`` describing repository deficiencies
-    and optimizations.
-    """
-    # Avoid cycle: cmdutil -> repair -> localrepo -> cmdutil
-    from . import localrepo
-
-    newreporeqs = localrepo.newreporequirements(repo)
-
-    improvements = []
-
-    # We could detect lack of revlogv1 and store here, but they were added
-    # in 0.9.2 and we don't support upgrading repos without these
-    # requirements, so let's not bother.
-
-    if 'fncache' not in repo.requirements:
-        improvements.append(upgradeimprovement(
-            name='fncache',
-            type=deficiency,
-            description=_('long and reserved filenames may not work correctly; '
-                          'repository performance is sub-optimal'),
-            upgrademessage=_('repository will be more resilient to storing '
-                             'certain paths and performance of certain '
-                             'operations should be improved'),
-            fromdefault=True,
-            fromconfig='fncache' in newreporeqs))
-
-    if 'dotencode' not in repo.requirements:
-        improvements.append(upgradeimprovement(
-            name='dotencode',
-            type=deficiency,
-            description=_('storage of filenames beginning with a period or '
-                          'space may not work correctly'),
-            upgrademessage=_('repository will be better able to store files '
-                             'beginning with a space or period'),
-            fromdefault=True,
-            fromconfig='dotencode' in newreporeqs))
-
-    if 'generaldelta' not in repo.requirements:
-        improvements.append(upgradeimprovement(
-            name='generaldelta',
-            type=deficiency,
-            description=_('deltas within internal storage are unable to '
-                          'choose optimal revisions; repository is larger and '
-                          'slower than it could be; interaction with other '
-                          'repositories may require extra network and CPU '
-                          'resources, making "hg push" and "hg pull" slower'),
-            upgrademessage=_('repository storage will be able to create '
-                             'optimal deltas; new repository data will be '
-                             'smaller and read times should decrease; '
-                             'interacting with other repositories using this '
-                             'storage model should require less network and '
-                             'CPU resources, making "hg push" and "hg pull" '
-                             'faster'),
-            fromdefault=True,
-            fromconfig='generaldelta' in newreporeqs))
-
-    # Mercurial 4.0 changed changelogs to not use delta chains. Search for
-    # changelogs with deltas.
-    cl = repo.changelog
-    for rev in cl:
-        chainbase = cl.chainbase(rev)
-        if chainbase != rev:
-            improvements.append(upgradeimprovement(
-                name='removecldeltachain',
-                type=deficiency,
-                description=_('changelog storage is using deltas instead of '
-                              'raw entries; changelog reading and any '
-                              'operation relying on changelog data are slower '
-                              'than they could be'),
-                upgrademessage=_('changelog storage will be reformated to '
-                                 'store raw entries; changelog reading will be '
-                                 'faster; changelog size may be reduced'),
-                fromdefault=True,
-                fromconfig=True))
-            break
-
-    # Now for the optimizations.
-
-    # These are unconditionally added. There is logic later that figures out
-    # which ones to apply.
-
-    improvements.append(upgradeimprovement(
-        name='redeltaparent',
-        type=optimisation,
-        description=_('deltas within internal storage will be recalculated to '
-                      'choose an optimal base revision where this was not '
-                      'already done; the size of the repository may shrink and '
-                      'various operations may become faster; the first time '
-                      'this optimization is performed could slow down upgrade '
-                      'execution considerably; subsequent invocations should '
-                      'not run noticeably slower'),
-        upgrademessage=_('deltas within internal storage will choose a new '
-                         'base revision if needed')))
-
-    improvements.append(upgradeimprovement(
-        name='redeltamultibase',
-        type=optimisation,
-        description=_('deltas within internal storage will be recalculated '
-                      'against multiple base revision and the smallest '
-                      'difference will be used; the size of the repository may '
-                      'shrink significantly when there are many merges; this '
-                      'optimization will slow down execution in proportion to '
-                      'the number of merges in the repository and the amount '
-                      'of files in the repository; this slow down should not '
-                      'be significant unless there are tens of thousands of '
-                      'files and thousands of merges'),
-        upgrademessage=_('deltas within internal storage will choose an '
-                         'optimal delta by computing deltas against multiple '
-                         'parents; may slow down execution time '
-                         'significantly')))
-
-    improvements.append(upgradeimprovement(
-        name='redeltaall',
-        type=optimisation,
-        description=_('deltas within internal storage will always be '
-                      'recalculated without reusing prior deltas; this will '
-                      'likely make execution run several times slower; this '
-                      'optimization is typically not needed'),
-        upgrademessage=_('deltas within internal storage will be fully '
-                         'recomputed; this will likely drastically slow down '
-                         'execution time')))
-
-    return improvements
-
-def upgradedetermineactions(repo, improvements, sourcereqs, destreqs,
-                            optimize):
-    """Determine upgrade actions that will be performed.
-
-    Given a list of improvements as returned by ``upgradefindimprovements``,
-    determine the list of upgrade actions that will be performed.
-
-    The role of this function is to filter improvements if needed, apply
-    recommended optimizations from the improvements list that make sense,
-    etc.
-
-    Returns a list of action names.
-    """
-    newactions = []
-
-    knownreqs = upgradesupporteddestrequirements(repo)
-
-    for i in improvements:
-        name = i.name
-
-        # If the action is a requirement that doesn't show up in the
-        # destination requirements, prune the action.
-        if name in knownreqs and name not in destreqs:
-            continue
-
-        if i.type == deficiency:
-            newactions.append(name)
-
-    newactions.extend(o for o in sorted(optimize) if o not in newactions)
-
-    # FUTURE consider adding some optimizations here for certain transitions.
-    # e.g. adding generaldelta could schedule parent redeltas.
-
-    return newactions
-
-def _revlogfrompath(repo, path):
-    """Obtain a revlog from a repo path.
-
-    An instance of the appropriate class is returned.
-    """
-    if path == '00changelog.i':
-        return changelog.changelog(repo.svfs)
-    elif path.endswith('00manifest.i'):
-        mandir = path[:-len('00manifest.i')]
-        return manifest.manifestrevlog(repo.svfs, dir=mandir)
-    else:
-        # Filelogs don't do anything special with settings. So we can use a
-        # vanilla revlog.
-        return revlog.revlog(repo.svfs, path)
-
-def _copyrevlogs(ui, srcrepo, dstrepo, tr, deltareuse, aggressivemergedeltas):
-    """Copy revlogs between 2 repos."""
-    revcount = 0
-    srcsize = 0
-    srcrawsize = 0
-    dstsize = 0
-    fcount = 0
-    frevcount = 0
-    fsrcsize = 0
-    frawsize = 0
-    fdstsize = 0
-    mcount = 0
-    mrevcount = 0
-    msrcsize = 0
-    mrawsize = 0
-    mdstsize = 0
-    crevcount = 0
-    csrcsize = 0
-    crawsize = 0
-    cdstsize = 0
-
-    # Perform a pass to collect metadata. This validates we can open all
-    # source files and allows a unified progress bar to be displayed.
-    for unencoded, encoded, size in srcrepo.store.walk():
-        if unencoded.endswith('.d'):
-            continue
-
-        rl = _revlogfrompath(srcrepo, unencoded)
-        revcount += len(rl)
-
-        datasize = 0
-        rawsize = 0
-        idx = rl.index
-        for rev in rl:
-            e = idx[rev]
-            datasize += e[1]
-            rawsize += e[2]
-
-        srcsize += datasize
-        srcrawsize += rawsize
-
-        # This is for the separate progress bars.
-        if isinstance(rl, changelog.changelog):
-            crevcount += len(rl)
-            csrcsize += datasize
-            crawsize += rawsize
-        elif isinstance(rl, manifest.manifestrevlog):
-            mcount += 1
-            mrevcount += len(rl)
-            msrcsize += datasize
-            mrawsize += rawsize
-        elif isinstance(rl, revlog.revlog):
-            fcount += 1
-            frevcount += len(rl)
-            fsrcsize += datasize
-            frawsize += rawsize
-
-    if not revcount:
-        return
-
-    ui.write(_('migrating %d total revisions (%d in filelogs, %d in manifests, '
-               '%d in changelog)\n') %
-             (revcount, frevcount, mrevcount, crevcount))
-    ui.write(_('migrating %s in store; %s tracked data\n') % (
-             (util.bytecount(srcsize), util.bytecount(srcrawsize))))
-
-    # Used to keep track of progress.
-    progress = []
-    def oncopiedrevision(rl, rev, node):
-        progress[1] += 1
-        srcrepo.ui.progress(progress[0], progress[1], total=progress[2])
-
-    # Do the actual copying.
-    # FUTURE this operation can be farmed off to worker processes.
-    seen = set()
-    for unencoded, encoded, size in srcrepo.store.walk():
-        if unencoded.endswith('.d'):
-            continue
-
-        oldrl = _revlogfrompath(srcrepo, unencoded)
-        newrl = _revlogfrompath(dstrepo, unencoded)
-
-        if isinstance(oldrl, changelog.changelog) and 'c' not in seen:
-            ui.write(_('finished migrating %d manifest revisions across %d '
-                       'manifests; change in size: %s\n') %
-                     (mrevcount, mcount, util.bytecount(mdstsize - msrcsize)))
-
-            ui.write(_('migrating changelog containing %d revisions '
-                       '(%s in store; %s tracked data)\n') %
-                     (crevcount, util.bytecount(csrcsize),
-                      util.bytecount(crawsize)))
-            seen.add('c')
-            progress[:] = [_('changelog revisions'), 0, crevcount]
-        elif isinstance(oldrl, manifest.manifestrevlog) and 'm' not in seen:
-            ui.write(_('finished migrating %d filelog revisions across %d '
-                       'filelogs; change in size: %s\n') %
-                     (frevcount, fcount, util.bytecount(fdstsize - fsrcsize)))
-
-            ui.write(_('migrating %d manifests containing %d revisions '
-                       '(%s in store; %s tracked data)\n') %
-                     (mcount, mrevcount, util.bytecount(msrcsize),
-                      util.bytecount(mrawsize)))
-            seen.add('m')
-            progress[:] = [_('manifest revisions'), 0, mrevcount]
-        elif 'f' not in seen:
-            ui.write(_('migrating %d filelogs containing %d revisions '
-                       '(%s in store; %s tracked data)\n') %
-                     (fcount, frevcount, util.bytecount(fsrcsize),
-                      util.bytecount(frawsize)))
-            seen.add('f')
-            progress[:] = [_('file revisions'), 0, frevcount]
-
-        ui.progress(progress[0], progress[1], total=progress[2])
-
-        ui.note(_('cloning %d revisions from %s\n') % (len(oldrl), unencoded))
-        oldrl.clone(tr, newrl, addrevisioncb=oncopiedrevision,
-                    deltareuse=deltareuse,
-                    aggressivemergedeltas=aggressivemergedeltas)
-
-        datasize = 0
-        idx = newrl.index
-        for rev in newrl:
-            datasize += idx[rev][1]
-
-        dstsize += datasize
-
-        if isinstance(newrl, changelog.changelog):
-            cdstsize += datasize
-        elif isinstance(newrl, manifest.manifestrevlog):
-            mdstsize += datasize
-        else:
-            fdstsize += datasize
-
-    ui.progress(progress[0], None)
-
-    ui.write(_('finished migrating %d changelog revisions; change in size: '
-               '%s\n') % (crevcount, util.bytecount(cdstsize - csrcsize)))
-
-    ui.write(_('finished migrating %d total revisions; total change in store '
-               'size: %s\n') % (revcount, util.bytecount(dstsize - srcsize)))
-
-def _upgradefilterstorefile(srcrepo, dstrepo, requirements, path, mode, st):
-    """Determine whether to copy a store file during upgrade.
-
-    This function is called when migrating store files from ``srcrepo`` to
-    ``dstrepo`` as part of upgrading a repository.
-
-    Args:
-      srcrepo: repo we are copying from
-      dstrepo: repo we are copying to
-      requirements: set of requirements for ``dstrepo``
-      path: store file being examined
-      mode: the ``ST_MODE`` file type of ``path``
-      st: ``stat`` data structure for ``path``
-
-    Function should return ``True`` if the file is to be copied.
-    """
-    # Skip revlogs.
-    if path.endswith(('.i', '.d')):
-        return False
-    # Skip transaction related files.
-    if path.startswith('undo'):
-        return False
-    # Only copy regular files.
-    if mode != stat.S_IFREG:
-        return False
-    # Skip other skipped files.
-    if path in ('lock', 'fncache'):
-        return False
-
-    return True
-
-def _upgradefinishdatamigration(ui, srcrepo, dstrepo, requirements):
-    """Hook point for extensions to perform additional actions during upgrade.
-
-    This function is called after revlogs and store files have been copied but
-    before the new store is swapped into the original location.
-    """
-
-def _upgraderepo(ui, srcrepo, dstrepo, requirements, actions):
-    """Do the low-level work of upgrading a repository.
-
-    The upgrade is effectively performed as a copy between a source
-    repository and a temporary destination repository.
-
-    The source repository is unmodified for as long as possible so the
-    upgrade can abort at any time without causing loss of service for
-    readers and without corrupting the source repository.
-    """
-    assert srcrepo.currentwlock()
-    assert dstrepo.currentwlock()
-
-    ui.write(_('(it is safe to interrupt this process any time before '
-               'data migration completes)\n'))
-
-    if 'redeltaall' in actions:
-        deltareuse = revlog.revlog.DELTAREUSENEVER
-    elif 'redeltaparent' in actions:
-        deltareuse = revlog.revlog.DELTAREUSESAMEREVS
-    elif 'redeltamultibase' in actions:
-        deltareuse = revlog.revlog.DELTAREUSESAMEREVS
-    else:
-        deltareuse = revlog.revlog.DELTAREUSEALWAYS
-
-    with dstrepo.transaction('upgrade') as tr:
-        _copyrevlogs(ui, srcrepo, dstrepo, tr, deltareuse,
-                     'redeltamultibase' in actions)
-
-    # Now copy other files in the store directory.
-    for p, kind, st in srcrepo.store.vfs.readdir('', stat=True):
-        if not _upgradefilterstorefile(srcrepo, dstrepo, requirements,
-                                       p, kind, st):
-            continue
-
-        srcrepo.ui.write(_('copying %s\n') % p)
-        src = srcrepo.store.vfs.join(p)
-        dst = dstrepo.store.vfs.join(p)
-        util.copyfile(src, dst, copystat=True)
-
-    _upgradefinishdatamigration(ui, srcrepo, dstrepo, requirements)
-
-    ui.write(_('data fully migrated to temporary repository\n'))
-
-    backuppath = tempfile.mkdtemp(prefix='upgradebackup.', dir=srcrepo.path)
-    backupvfs = vfsmod.vfs(backuppath)
-
-    # Make a backup of requires file first, as it is the first to be modified.
-    util.copyfile(srcrepo.vfs.join('requires'), backupvfs.join('requires'))
-
-    # We install an arbitrary requirement that clients must not support
-    # as a mechanism to lock out new clients during the data swap. This is
-    # better than allowing a client to continue while the repository is in
-    # an inconsistent state.
-    ui.write(_('marking source repository as being upgraded; clients will be '
-               'unable to read from repository\n'))
-    scmutil.writerequires(srcrepo.vfs,
-                          srcrepo.requirements | set(['upgradeinprogress']))
-
-    ui.write(_('starting in-place swap of repository data\n'))
-    ui.write(_('replaced files will be backed up at %s\n') %
-             backuppath)
-
-    # Now swap in the new store directory. Doing it as a rename should make
-    # the operation nearly instantaneous and atomic (at least in well-behaved
-    # environments).
-    ui.write(_('replacing store...\n'))
-    tstart = util.timer()
-    util.rename(srcrepo.spath, backupvfs.join('store'))
-    util.rename(dstrepo.spath, srcrepo.spath)
-    elapsed = util.timer() - tstart
-    ui.write(_('store replacement complete; repository was inconsistent for '
-               '%0.1fs\n') % elapsed)
-
-    # We first write the requirements file. Any new requirements will lock
-    # out legacy clients.
-    ui.write(_('finalizing requirements file and making repository readable '
-               'again\n'))
-    scmutil.writerequires(srcrepo.vfs, requirements)
-
-    # The lock file from the old store won't be removed because nothing has a
-    # reference to its new location. So clean it up manually. Alternatively, we
-    # could update srcrepo.svfs and other variables to point to the new
-    # location. This is simpler.
-    backupvfs.unlink('store/lock')
-
-    return backuppath
-
-def upgraderepo(ui, repo, run=False, optimize=None):
-    """Upgrade a repository in place."""
-    # Avoid cycle: cmdutil -> repair -> localrepo -> cmdutil
-    from . import localrepo
-
-    optimize = set(optimize or [])
-    repo = repo.unfiltered()
-
-    # Ensure the repository can be upgraded.
-    missingreqs = upgraderequiredsourcerequirements(repo) - repo.requirements
-    if missingreqs:
-        raise error.Abort(_('cannot upgrade repository; requirement '
-                            'missing: %s') % _(', ').join(sorted(missingreqs)))
-
-    blockedreqs = upgradeblocksourcerequirements(repo) & repo.requirements
-    if blockedreqs:
-        raise error.Abort(_('cannot upgrade repository; unsupported source '
-                            'requirement: %s') %
-                          _(', ').join(sorted(blockedreqs)))
-
-    # FUTURE there is potentially a need to control the wanted requirements via
-    # command arguments or via an extension hook point.
-    newreqs = localrepo.newreporequirements(repo)
-
-    noremovereqs = (repo.requirements - newreqs -
-                   upgradesupportremovedrequirements(repo))
-    if noremovereqs:
-        raise error.Abort(_('cannot upgrade repository; requirement would be '
-                            'removed: %s') % _(', ').join(sorted(noremovereqs)))
-
-    noaddreqs = (newreqs - repo.requirements -
-                 upgradeallowednewrequirements(repo))
-    if noaddreqs:
-        raise error.Abort(_('cannot upgrade repository; do not support adding '
-                            'requirement: %s') %
-                          _(', ').join(sorted(noaddreqs)))
-
-    unsupportedreqs = newreqs - upgradesupporteddestrequirements(repo)
-    if unsupportedreqs:
-        raise error.Abort(_('cannot upgrade repository; do not support '
-                            'destination requirement: %s') %
-                          _(', ').join(sorted(unsupportedreqs)))
-
-    # Find and validate all improvements that can be made.
-    improvements = upgradefindimprovements(repo)
-    for i in improvements:
-        if i.type not in (deficiency, optimisation):
-            raise error.Abort(_('unexpected improvement type %s for %s') % (
-                i.type, i.name))
-
-    # Validate arguments.
-    unknownoptimize = optimize - set(i.name for i in improvements
-                                     if i.type == optimisation)
-    if unknownoptimize:
-        raise error.Abort(_('unknown optimization action requested: %s') %
-                          ', '.join(sorted(unknownoptimize)),
-                          hint=_('run without arguments to see valid '
-                                 'optimizations'))
-
-    actions = upgradedetermineactions(repo, improvements, repo.requirements,
-                                      newreqs, optimize)
-
-    def printrequirements():
-        ui.write(_('requirements\n'))
-        ui.write(_('   preserved: %s\n') %
-                 _(', ').join(sorted(newreqs & repo.requirements)))
-
-        if repo.requirements - newreqs:
-            ui.write(_('   removed: %s\n') %
-                     _(', ').join(sorted(repo.requirements - newreqs)))
-
-        if newreqs - repo.requirements:
-            ui.write(_('   added: %s\n') %
-                     _(', ').join(sorted(newreqs - repo.requirements)))
-
-        ui.write('\n')
-
-    def printupgradeactions():
-        for action in actions:
-            for i in improvements:
-                if i.name == action:
-                    ui.write('%s\n   %s\n\n' %
-                             (i.name, i.upgrademessage))
-
-    if not run:
-        fromdefault = []
-        fromconfig = []
-        optimizations = []
-
-        for i in improvements:
-            assert i.type in (deficiency, optimisation)
-            if i.type == deficiency:
-                if i.fromdefault:
-                    fromdefault.append(i)
-                if i.fromconfig:
-                    fromconfig.append(i)
-            else:
-                optimizations.append(i)
-
-        if fromdefault or fromconfig:
-            fromconfignames = set(x.name for x in fromconfig)
-            onlydefault = [i for i in fromdefault
-                           if i.name not in fromconfignames]
-
-            if fromconfig:
-                ui.write(_('repository lacks features recommended by '
-                           'current config options:\n\n'))
-                for i in fromconfig:
-                    ui.write('%s\n   %s\n\n' % (i.name, i.description))
-
-            if onlydefault:
-                ui.write(_('repository lacks features used by the default '
-                           'config options:\n\n'))
-                for i in onlydefault:
-                    ui.write('%s\n   %s\n\n' % (i.name, i.description))
-
-            ui.write('\n')
-        else:
-            ui.write(_('(no feature deficiencies found in existing '
-                       'repository)\n'))
-
-        ui.write(_('performing an upgrade with "--run" will make the following '
-                   'changes:\n\n'))
-
-        printrequirements()
-        printupgradeactions()
-
-        unusedoptimize = [i for i in improvements
-                          if i.name not in actions and i.type == optimisation]
-        if unusedoptimize:
-            ui.write(_('additional optimizations are available by specifying '
-                     '"--optimize <name>":\n\n'))
-            for i in unusedoptimize:
-                ui.write(_('%s\n   %s\n\n') % (i.name, i.description))
-        return
-
-    # Else we're in the run=true case.
-    ui.write(_('upgrade will perform the following actions:\n\n'))
-    printrequirements()
-    printupgradeactions()
-
-    ui.write(_('beginning upgrade...\n'))
-    with repo.wlock():
-        with repo.lock():
-            ui.write(_('repository locked and read-only\n'))
-            # Our strategy for upgrading the repository is to create a new,
-            # temporary repository, write data to it, then do a swap of the
-            # data. There are less heavyweight ways to do this, but it is easier
-            # to create a new repo object than to instantiate all the components
-            # (like the store) separately.
-            tmppath = tempfile.mkdtemp(prefix='upgrade.', dir=repo.path)
-            backuppath = None
-            try:
-                ui.write(_('creating temporary repository to stage migrated '
-                           'data: %s\n') % tmppath)
-                dstrepo = localrepo.localrepository(repo.baseui,
-                                                    path=tmppath,
-                                                    create=True)
-
-                with dstrepo.wlock():
-                    with dstrepo.lock():
-                        backuppath = _upgraderepo(ui, repo, dstrepo, newreqs,
-                                                  actions)
-
-            finally:
-                ui.write(_('removing temporary repository %s\n') % tmppath)
-                repo.vfs.rmtree(tmppath, forcibly=True)
-
-                if backuppath:
-                    ui.warn(_('copy of old repository backed up at %s\n') %
-                            backuppath)
-                    ui.warn(_('the old repository will not be deleted; remove '
-                              'it to free up disk space once the upgraded '
-                              'repository is verified\n'))

mercurial/upgrade.py

@@ -8,358 +8,20
 
 from __future__ import absolute_import
 
-import errno
-import hashlib
 import stat
 import tempfile
 
 from .i18n import _
-from .node import short
 from . import (
-    bundle2,
-    changegroup,
     changelog,
     error,
-    exchange,
     manifest,
-    obsolete,
     revlog,
     scmutil,
     util,
     vfs as vfsmod,
 )
 
-def _bundle(repo, bases, heads, node, suffix, compress=True):
-    """create a bundle with the specified revisions as a backup"""
-    cgversion = changegroup.safeversion(repo)
-
-    cg = changegroup.changegroupsubset(repo, bases, heads, 'strip',
-                                       version=cgversion)
-    backupdir = "strip-backup"
-    vfs = repo.vfs
-    if not vfs.isdir(backupdir):
-        vfs.mkdir(backupdir)
-
-    # Include a hash of all the nodes in the filename for uniqueness
-    allcommits = repo.set('%ln::%ln', bases, heads)
-    allhashes = sorted(c.hex() for c in allcommits)
-    totalhash = hashlib.sha1(''.join(allhashes)).hexdigest()
-    name = "%s/%s-%s-%s.hg" % (backupdir, short(node), totalhash[:8], suffix)
-
-    comp = None
-    if cgversion != '01':
-        bundletype = "HG20"
-        if compress:
-            comp = 'BZ'
-    elif compress:
-        bundletype = "HG10BZ"
-    else:
-        bundletype = "HG10UN"
-    return bundle2.writebundle(repo.ui, cg, name, bundletype, vfs,
-                                   compression=comp)
-
-def _collectfiles(repo, striprev):
-    """find out the filelogs affected by the strip"""
-    files = set()
-
-    for x in xrange(striprev, len(repo)):
-        files.update(repo[x].files())
-
-    return sorted(files)
-
-def _collectbrokencsets(repo, files, striprev):
-    """return the changesets which will be broken by the truncation"""
-    s = set()
-    def collectone(revlog):
-        _, brokenset = revlog.getstrippoint(striprev)
-        s.update([revlog.linkrev(r) for r in brokenset])
-
-    collectone(repo.manifestlog._revlog)
-    for fname in files:
-        collectone(repo.file(fname))
-
-    return s
-
-def strip(ui, repo, nodelist, backup=True, topic='backup'):
-    # This function operates within a transaction of its own, but does
-    # not take any lock on the repo.
-    # Simple way to maintain backwards compatibility for this
-    # argument.
-    if backup in ['none', 'strip']:
-        backup = False
-
-    repo = repo.unfiltered()
-    repo.destroying()
-
-    cl = repo.changelog
-    # TODO handle undo of merge sets
-    if isinstance(nodelist, str):
-        nodelist = [nodelist]
-    striplist = [cl.rev(node) for node in nodelist]
-    striprev = min(striplist)
-
-    files = _collectfiles(repo, striprev)
-    saverevs = _collectbrokencsets(repo, files, striprev)
-
-    # Some revisions with rev > striprev may not be descendants of striprev.
-    # We have to find these revisions and put them in a bundle, so that
-    # we can restore them after the truncations.
-    # To create the bundle we use repo.changegroupsubset which requires
-    # the list of heads and bases of the set of interesting revisions.
-    # (head = revision in the set that has no descendant in the set;
-    #  base = revision in the set that has no ancestor in the set)
-    tostrip = set(striplist)
-    saveheads = set(saverevs)
-    for r in cl.revs(start=striprev + 1):
-        if any(p in tostrip for p in cl.parentrevs(r)):
-            tostrip.add(r)
-
-        if r not in tostrip:
-            saverevs.add(r)
-            saveheads.difference_update(cl.parentrevs(r))
-            saveheads.add(r)
-    saveheads = [cl.node(r) for r in saveheads]
-
-    # compute base nodes
-    if saverevs:
-        descendants = set(cl.descendants(saverevs))
-        saverevs.difference_update(descendants)
-    savebases = [cl.node(r) for r in saverevs]
-    stripbases = [cl.node(r) for r in tostrip]
-
-    # For a set s, max(parents(s) - s) is the same as max(heads(::s - s)), but
-    # is much faster
-    newbmtarget = repo.revs('max(parents(%ld) - (%ld))', tostrip, tostrip)
-    if newbmtarget:
-        newbmtarget = repo[newbmtarget.first()].node()
-    else:
-        newbmtarget = '.'
-
-    bm = repo._bookmarks
-    updatebm = []
-    for m in bm:
-        rev = repo[bm[m]].rev()
-        if rev in tostrip:
-            updatebm.append(m)
-
-    # create a changegroup for all the branches we need to keep
-    backupfile = None
-    vfs = repo.vfs
-    node = nodelist[-1]
-    if backup:
-        backupfile = _bundle(repo, stripbases, cl.heads(), node, topic)
-        repo.ui.status(_("saved backup bundle to %s\n") %
-                       vfs.join(backupfile))
-        repo.ui.log("backupbundle", "saved backup bundle to %s\n",
-                    vfs.join(backupfile))
-    tmpbundlefile = None
-    if saveheads:
-        # do not compress temporary bundle if we remove it from disk later
-        tmpbundlefile = _bundle(repo, savebases, saveheads, node, 'temp',
-                            compress=False)
-
-    mfst = repo.manifestlog._revlog
-
-    curtr = repo.currenttransaction()
-    if curtr is not None:
-        del curtr  # avoid carrying reference to transaction for nothing
-        raise error.ProgrammingError('cannot strip from inside a transaction')
-
-    try:
-        with repo.transaction("strip") as tr:
-            offset = len(tr.entries)
-
-            tr.startgroup()
-            cl.strip(striprev, tr)
-            mfst.strip(striprev, tr)
-            if 'treemanifest' in repo.requirements: # safe but unnecessary
-                                                    # otherwise
-                for unencoded, encoded, size in repo.store.datafiles():
-                    if (unencoded.startswith('meta/') and
-                        unencoded.endswith('00manifest.i')):
-                        dir = unencoded[5:-12]
-                        repo.manifestlog._revlog.dirlog(dir).strip(striprev, tr)
-            for fn in files:
-                repo.file(fn).strip(striprev, tr)
-            tr.endgroup()
-
-            for i in xrange(offset, len(tr.entries)):
-                file, troffset, ignore = tr.entries[i]
-                with repo.svfs(file, 'a', checkambig=True) as fp:
-                    fp.truncate(troffset)
-                if troffset == 0:
-                    repo.store.markremoved(file)
-
-        if tmpbundlefile:
-            ui.note(_("adding branch\n"))
-            f = vfs.open(tmpbundlefile, "rb")
-            gen = exchange.readbundle(ui, f, tmpbundlefile, vfs)
-            if not repo.ui.verbose:
-                # silence internal shuffling chatter
-                repo.ui.pushbuffer()
-            if isinstance(gen, bundle2.unbundle20):
-                with repo.transaction('strip') as tr:
-                    tr.hookargs = {'source': 'strip',
-                                   'url': 'bundle:' + vfs.join(tmpbundlefile)}
-                    bundle2.applybundle(repo, gen, tr, source='strip',
-                                        url='bundle:' + vfs.join(tmpbundlefile))
-            else:
-                gen.apply(repo, 'strip', 'bundle:' + vfs.join(tmpbundlefile),
-                          True)
-            if not repo.ui.verbose:
-                repo.ui.popbuffer()
-            f.close()
-        repo._phasecache.invalidate()
-
-        for m in updatebm:
-            bm[m] = repo[newbmtarget].node()
-
-        with repo.lock():
-            with repo.transaction('repair') as tr:
-                bm.recordchange(tr)
-
-        # remove undo files
-        for undovfs, undofile in repo.undofiles():
-            try:
-                undovfs.unlink(undofile)
-            except OSError as e:
-                if e.errno != errno.ENOENT:
-                    ui.warn(_('error removing %s: %s\n') %
-                            (undovfs.join(undofile), str(e)))
-
-    except: # re-raises
-        if backupfile:
-            ui.warn(_("strip failed, backup bundle stored in '%s'\n")
-                    % vfs.join(backupfile))
-        if tmpbundlefile:
-            ui.warn(_("strip failed, unrecovered changes stored in '%s'\n")
-                    % vfs.join(tmpbundlefile))
-            ui.warn(_("(fix the problem, then recover the changesets with "
-                      "\"hg unbundle '%s'\")\n") % vfs.join(tmpbundlefile))
-        raise
-    else:
-        if tmpbundlefile:
-            # Remove temporary bundle only if there were no exceptions
-            vfs.unlink(tmpbundlefile)
-
-    repo.destroyed()
-    # return the backup file path (or None if 'backup' was False) so
-    # extensions can use it
-    return backupfile
-
-def rebuildfncache(ui, repo):
-    """Rebuilds the fncache file from repo history.
-
-    Missing entries will be added. Extra entries will be removed.
-    """
-    repo = repo.unfiltered()
-
-    if 'fncache' not in repo.requirements:
-        ui.warn(_('(not rebuilding fncache because repository does not '
-                  'support fncache)\n'))
-        return
-
-    with repo.lock():
-        fnc = repo.store.fncache
-        # Trigger load of fncache.
-        if 'irrelevant' in fnc:
-            pass
-
-        oldentries = set(fnc.entries)
-        newentries = set()
-        seenfiles = set()
-
-        repolen = len(repo)
-        for rev in repo:
-            ui.progress(_('rebuilding'), rev, total=repolen,
-                        unit=_('changesets'))
-
-            ctx = repo[rev]
-            for f in ctx.files():
-                # This is to minimize I/O.
-                if f in seenfiles:
-                    continue
-                seenfiles.add(f)
-
-                i = 'data/%s.i' % f
-                d = 'data/%s.d' % f
-
-                if repo.store._exists(i):
-                    newentries.add(i)
-                if repo.store._exists(d):
-                    newentries.add(d)
-
-        ui.progress(_('rebuilding'), None)
-
-        if 'treemanifest' in repo.requirements: # safe but unnecessary otherwise
-            for dir in util.dirs(seenfiles):
-                i = 'meta/%s/00manifest.i' % dir
-                d = 'meta/%s/00manifest.d' % dir
-
-                if repo.store._exists(i):
-                    newentries.add(i)
-                if repo.store._exists(d):
-                    newentries.add(d)
-
-        addcount = len(newentries - oldentries)
-        removecount = len(oldentries - newentries)
-        for p in sorted(oldentries - newentries):
-            ui.write(_('removing %s\n') % p)
-        for p in sorted(newentries - oldentries):
-            ui.write(_('adding %s\n') % p)
-
-        if addcount or removecount:
-            ui.write(_('%d items added, %d removed from fncache\n') %
-                     (addcount, removecount))
-            fnc.entries = newentries
-            fnc._dirty = True
-
-            with repo.transaction('fncache') as tr:
-                fnc.write(tr)
-        else:
-            ui.write(_('fncache already up to date\n'))
-
-def stripbmrevset(repo, mark):
-    """
-    The revset to strip when strip is called with -B mark
-
-    Needs to live here so extensions can use it and wrap it even when strip is
-    not enabled or not present on a box.
-    """
-    return repo.revs("ancestors(bookmark(%s)) - "
-                     "ancestors(head() and not bookmark(%s)) - "
-                     "ancestors(bookmark() and not bookmark(%s))",
-                     mark, mark, mark)
-
-def deleteobsmarkers(obsstore, indices):
-    """Delete some obsmarkers from obsstore and return how many were deleted
-
-    'indices' is a list of ints which are the indices
-    of the markers to be deleted.
-
-    Every invocation of this function completely rewrites the obsstore file,
-    skipping the markers we want to be removed. The new temporary file is
-    created, remaining markers are written there and on .close() this file
-    gets atomically renamed to obsstore, thus guaranteeing consistency."""
-    if not indices:
-        # we don't want to rewrite the obsstore with the same content
-        return
-
-    left = []
-    current = obsstore._all
-    n = 0
-    for i, m in enumerate(current):
-        if i in indices:
-            n += 1
-            continue
-        left.append(m)
-
-    newobsstorefile = obsstore.svfs('obsstore', 'w', atomictemp=True)
-    for bytes in obsolete.encodemarkers(left, True, obsstore._version):
-        newobsstorefile.write(bytes)
-    newobsstorefile.close()
-    return n
-
 def upgraderequiredsourcerequirements(repo):
     """Obtain requirements required to be present to upgrade a repo.