Show More
@@ -1,493 +1,508 b'' | |||
|
1 | 1 | HGRC(5) |
|
2 | 2 | ======= |
|
3 | 3 | Bryan O'Sullivan <bos@serpentine.com> |
|
4 | 4 | |
|
5 | 5 | NAME |
|
6 | 6 | ---- |
|
7 | 7 | hgrc - configuration files for Mercurial |
|
8 | 8 | |
|
9 | 9 | SYNOPSIS |
|
10 | 10 | -------- |
|
11 | 11 | |
|
12 | 12 | The Mercurial system uses a set of configuration files to control |
|
13 | 13 | aspects of its behaviour. |
|
14 | 14 | |
|
15 | 15 | FILES |
|
16 | 16 | ----- |
|
17 | 17 | |
|
18 | 18 | Mercurial reads configuration data from several files, if they exist. |
|
19 | 19 | The names of these files depend on the system on which Mercurial is |
|
20 | 20 | installed. |
|
21 | 21 | |
|
22 | 22 | (Unix) <install-root>/etc/mercurial/hgrc.d/*.rc:: |
|
23 | 23 | (Unix) <install-root>/etc/mercurial/hgrc:: |
|
24 | 24 | Per-installation configuration files, searched for in the |
|
25 | 25 | directory where Mercurial is installed. For example, if installed |
|
26 | 26 | in /shared/tools, Mercurial will look in |
|
27 | 27 | /shared/tools/etc/mercurial/hgrc. Options in these files apply to |
|
28 | 28 | all Mercurial commands executed by any user in any directory. |
|
29 | 29 | |
|
30 | 30 | (Unix) /etc/mercurial/hgrc.d/*.rc:: |
|
31 | 31 | (Unix) /etc/mercurial/hgrc:: |
|
32 | 32 | (Windows) C:\Mercurial\Mercurial.ini:: |
|
33 | 33 | Per-system configuration files, for the system on which Mercurial |
|
34 | 34 | is running. Options in these files apply to all Mercurial |
|
35 | 35 | commands executed by any user in any directory. Options in these |
|
36 | 36 | files override per-installation options. |
|
37 | 37 | |
|
38 | 38 | (Unix) $HOME/.hgrc:: |
|
39 | 39 | (Windows) C:\Documents and Settings\USERNAME\Mercurial.ini:: |
|
40 | 40 | (Windows) $HOME\Mercurial.ini:: |
|
41 | 41 | Per-user configuration file, for the user running Mercurial. |
|
42 | 42 | Options in this file apply to all Mercurial commands executed by |
|
43 | 43 | any user in any directory. Options in this file override |
|
44 | 44 | per-installation and per-system options. |
|
45 | 45 | On Windows system, one of these is chosen exclusively according |
|
46 | 46 | to definition of HOME environment variable. |
|
47 | 47 | |
|
48 | 48 | (Unix, Windows) <repo>/.hg/hgrc:: |
|
49 | 49 | Per-repository configuration options that only apply in a |
|
50 | 50 | particular repository. This file is not version-controlled, and |
|
51 | 51 | will not get transferred during a "clone" operation. Options in |
|
52 | 52 | this file override options in all other configuration files. |
|
53 | 53 | On Unix, this file is only read if it belongs to a trusted user |
|
54 | 54 | or to a trusted group. |
|
55 | 55 | |
|
56 | 56 | SYNTAX |
|
57 | 57 | ------ |
|
58 | 58 | |
|
59 | 59 | A configuration file consists of sections, led by a "[section]" header |
|
60 | 60 | and followed by "name: value" entries; "name=value" is also accepted. |
|
61 | 61 | |
|
62 | 62 | [spam] |
|
63 | 63 | eggs=ham |
|
64 | 64 | green= |
|
65 | 65 | eggs |
|
66 | 66 | |
|
67 | 67 | Each line contains one entry. If the lines that follow are indented, |
|
68 | 68 | they are treated as continuations of that entry. |
|
69 | 69 | |
|
70 | 70 | Leading whitespace is removed from values. Empty lines are skipped. |
|
71 | 71 | |
|
72 | 72 | The optional values can contain format strings which refer to other |
|
73 | 73 | values in the same section, or values in a special DEFAULT section. |
|
74 | 74 | |
|
75 | 75 | Lines beginning with "#" or ";" are ignored and may be used to provide |
|
76 | 76 | comments. |
|
77 | 77 | |
|
78 | 78 | SECTIONS |
|
79 | 79 | -------- |
|
80 | 80 | |
|
81 | 81 | This section describes the different sections that may appear in a |
|
82 | 82 | Mercurial "hgrc" file, the purpose of each section, its possible |
|
83 | 83 | keys, and their possible values. |
|
84 | 84 | |
|
85 | 85 | decode/encode:: |
|
86 | 86 | Filters for transforming files on checkout/checkin. This would |
|
87 | 87 | typically be used for newline processing or other |
|
88 | 88 | localization/canonicalization of files. |
|
89 | 89 | |
|
90 | 90 | Filters consist of a filter pattern followed by a filter command. |
|
91 | 91 | Filter patterns are globs by default, rooted at the repository |
|
92 | 92 | root. For example, to match any file ending in ".txt" in the root |
|
93 | 93 | directory only, use the pattern "*.txt". To match any file ending |
|
94 | 94 | in ".c" anywhere in the repository, use the pattern "**.c". |
|
95 | 95 | |
|
96 | 96 | The filter command can start with a specifier, either "pipe:" or |
|
97 | 97 | "tempfile:". If no specifier is given, "pipe:" is used by default. |
|
98 | 98 | |
|
99 | 99 | A "pipe:" command must accept data on stdin and return the |
|
100 | 100 | transformed data on stdout. |
|
101 | 101 | |
|
102 | 102 | Pipe example: |
|
103 | 103 | |
|
104 | 104 | [encode] |
|
105 | 105 | # uncompress gzip files on checkin to improve delta compression |
|
106 | 106 | # note: not necessarily a good idea, just an example |
|
107 | 107 | *.gz = pipe: gunzip |
|
108 | 108 | |
|
109 | 109 | [decode] |
|
110 | 110 | # recompress gzip files when writing them to the working dir (we |
|
111 | 111 | # can safely omit "pipe:", because it's the default) |
|
112 | 112 | *.gz = gzip |
|
113 | 113 | |
|
114 | 114 | A "tempfile:" command is a template. The string INFILE is replaced |
|
115 | 115 | with the name of a temporary file that contains the data to be |
|
116 | 116 | filtered by the command. The string OUTFILE is replaced with the |
|
117 | 117 | name of an empty temporary file, where the filtered data must be |
|
118 | 118 | written by the command. |
|
119 | 119 | |
|
120 | 120 | NOTE: the tempfile mechanism is recommended for Windows systems, |
|
121 | 121 | where the standard shell I/O redirection operators often have |
|
122 | 122 | strange effects. In particular, if you are doing line ending |
|
123 | 123 | conversion on Windows using the popular dos2unix and unix2dos |
|
124 | 124 | programs, you *must* use the tempfile mechanism, as using pipes will |
|
125 | 125 | corrupt the contents of your files. |
|
126 | 126 | |
|
127 | 127 | Tempfile example: |
|
128 | 128 | |
|
129 | 129 | [encode] |
|
130 | 130 | # convert files to unix line ending conventions on checkin |
|
131 | 131 | **.txt = tempfile: dos2unix -n INFILE OUTFILE |
|
132 | 132 | |
|
133 | 133 | [decode] |
|
134 | 134 | # convert files to windows line ending conventions when writing |
|
135 | 135 | # them to the working dir |
|
136 | 136 | **.txt = tempfile: unix2dos -n INFILE OUTFILE |
|
137 | 137 | |
|
138 | defaults:: | |
|
139 | Use the [defaults] section to define command defaults, i.e. the | |
|
140 | default options/arguments to pass to the specified commands. | |
|
141 | ||
|
142 | The following example makes 'hg log' run in verbose mode, and | |
|
143 | 'hg status' show only the modified files, by default. | |
|
144 | ||
|
145 | [defaults] | |
|
146 | log = -v | |
|
147 | status = -m | |
|
148 | ||
|
149 | The actual commands, instead of their aliases, must be used when | |
|
150 | defining command defaults. The command defaults will also be | |
|
151 | applied to the aliases of the commands defined. | |
|
152 | ||
|
138 | 153 | email:: |
|
139 | 154 | Settings for extensions that send email messages. |
|
140 | 155 | from;; |
|
141 | 156 | Optional. Email address to use in "From" header and SMTP envelope |
|
142 | 157 | of outgoing messages. |
|
143 | 158 | to;; |
|
144 | 159 | Optional. Comma-separated list of recipients' email addresses. |
|
145 | 160 | cc;; |
|
146 | 161 | Optional. Comma-separated list of carbon copy recipients' |
|
147 | 162 | email addresses. |
|
148 | 163 | bcc;; |
|
149 | 164 | Optional. Comma-separated list of blind carbon copy |
|
150 | 165 | recipients' email addresses. Cannot be set interactively. |
|
151 | 166 | method;; |
|
152 | 167 | Optional. Method to use to send email messages. If value is |
|
153 | 168 | "smtp" (default), use SMTP (see section "[smtp]" for |
|
154 | 169 | configuration). Otherwise, use as name of program to run that |
|
155 | 170 | acts like sendmail (takes "-f" option for sender, list of |
|
156 | 171 | recipients on command line, message on stdin). Normally, setting |
|
157 | 172 | this to "sendmail" or "/usr/sbin/sendmail" is enough to use |
|
158 | 173 | sendmail to send messages. |
|
159 | 174 | |
|
160 | 175 | Email example: |
|
161 | 176 | |
|
162 | 177 | [email] |
|
163 | 178 | from = Joseph User <joe.user@example.com> |
|
164 | 179 | method = /usr/sbin/sendmail |
|
165 | 180 | |
|
166 | 181 | extensions:: |
|
167 | 182 | Mercurial has an extension mechanism for adding new features. To |
|
168 | 183 | enable an extension, create an entry for it in this section. |
|
169 | 184 | |
|
170 | 185 | If you know that the extension is already in Python's search path, |
|
171 | 186 | you can give the name of the module, followed by "=", with nothing |
|
172 | 187 | after the "=". |
|
173 | 188 | |
|
174 | 189 | Otherwise, give a name that you choose, followed by "=", followed by |
|
175 | 190 | the path to the ".py" file (including the file name extension) that |
|
176 | 191 | defines the extension. |
|
177 | 192 | |
|
178 | 193 | Example for ~/.hgrc: |
|
179 | 194 | |
|
180 | 195 | [extensions] |
|
181 | 196 | # (the mq extension will get loaded from mercurial's path) |
|
182 | 197 | hgext.mq = |
|
183 | 198 | # (this extension will get loaded from the file specified) |
|
184 | 199 | myfeature = ~/.hgext/myfeature.py |
|
185 | 200 | |
|
186 | 201 | hooks:: |
|
187 | 202 | Commands or Python functions that get automatically executed by |
|
188 | 203 | various actions such as starting or finishing a commit. Multiple |
|
189 | 204 | hooks can be run for the same action by appending a suffix to the |
|
190 | 205 | action. Overriding a site-wide hook can be done by changing its |
|
191 | 206 | value or setting it to an empty string. |
|
192 | 207 | |
|
193 | 208 | Example .hg/hgrc: |
|
194 | 209 | |
|
195 | 210 | [hooks] |
|
196 | 211 | # do not use the site-wide hook |
|
197 | 212 | incoming = |
|
198 | 213 | incoming.email = /my/email/hook |
|
199 | 214 | incoming.autobuild = /my/build/hook |
|
200 | 215 | |
|
201 | 216 | Most hooks are run with environment variables set that give added |
|
202 | 217 | useful information. For each hook below, the environment variables |
|
203 | 218 | it is passed are listed with names of the form "$HG_foo". |
|
204 | 219 | |
|
205 | 220 | changegroup;; |
|
206 | 221 | Run after a changegroup has been added via push, pull or |
|
207 | 222 | unbundle. ID of the first new changeset is in $HG_NODE. URL from |
|
208 | 223 | which changes came is in $HG_URL. |
|
209 | 224 | commit;; |
|
210 | 225 | Run after a changeset has been created in the local repository. |
|
211 | 226 | ID of the newly created changeset is in $HG_NODE. Parent |
|
212 | 227 | changeset IDs are in $HG_PARENT1 and $HG_PARENT2. |
|
213 | 228 | incoming;; |
|
214 | 229 | Run after a changeset has been pulled, pushed, or unbundled into |
|
215 | 230 | the local repository. The ID of the newly arrived changeset is in |
|
216 | 231 | $HG_NODE. URL that was source of changes came is in $HG_URL. |
|
217 | 232 | outgoing;; |
|
218 | 233 | Run after sending changes from local repository to another. ID of |
|
219 | 234 | first changeset sent is in $HG_NODE. Source of operation is in |
|
220 | 235 | $HG_SOURCE; see "preoutgoing" hook for description. |
|
221 | 236 | prechangegroup;; |
|
222 | 237 | Run before a changegroup is added via push, pull or unbundle. |
|
223 | 238 | Exit status 0 allows the changegroup to proceed. Non-zero status |
|
224 | 239 | will cause the push, pull or unbundle to fail. URL from which |
|
225 | 240 | changes will come is in $HG_URL. |
|
226 | 241 | precommit;; |
|
227 | 242 | Run before starting a local commit. Exit status 0 allows the |
|
228 | 243 | commit to proceed. Non-zero status will cause the commit to fail. |
|
229 | 244 | Parent changeset IDs are in $HG_PARENT1 and $HG_PARENT2. |
|
230 | 245 | preoutgoing;; |
|
231 | 246 | Run before computing changes to send from the local repository to |
|
232 | 247 | another. Non-zero status will cause failure. This lets you |
|
233 | 248 | prevent pull over http or ssh. Also prevents against local pull, |
|
234 | 249 | push (outbound) or bundle commands, but not effective, since you |
|
235 | 250 | can just copy files instead then. Source of operation is in |
|
236 | 251 | $HG_SOURCE. If "serve", operation is happening on behalf of |
|
237 | 252 | remote ssh or http repository. If "push", "pull" or "bundle", |
|
238 | 253 | operation is happening on behalf of repository on same system. |
|
239 | 254 | pretag;; |
|
240 | 255 | Run before creating a tag. Exit status 0 allows the tag to be |
|
241 | 256 | created. Non-zero status will cause the tag to fail. ID of |
|
242 | 257 | changeset to tag is in $HG_NODE. Name of tag is in $HG_TAG. Tag |
|
243 | 258 | is local if $HG_LOCAL=1, in repo if $HG_LOCAL=0. |
|
244 | 259 | pretxnchangegroup;; |
|
245 | 260 | Run after a changegroup has been added via push, pull or unbundle, |
|
246 | 261 | but before the transaction has been committed. Changegroup is |
|
247 | 262 | visible to hook program. This lets you validate incoming changes |
|
248 | 263 | before accepting them. Passed the ID of the first new changeset |
|
249 | 264 | in $HG_NODE. Exit status 0 allows the transaction to commit. |
|
250 | 265 | Non-zero status will cause the transaction to be rolled back and |
|
251 | 266 | the push, pull or unbundle will fail. URL that was source of |
|
252 | 267 | changes is in $HG_URL. |
|
253 | 268 | pretxncommit;; |
|
254 | 269 | Run after a changeset has been created but the transaction not yet |
|
255 | 270 | committed. Changeset is visible to hook program. This lets you |
|
256 | 271 | validate commit message and changes. Exit status 0 allows the |
|
257 | 272 | commit to proceed. Non-zero status will cause the transaction to |
|
258 | 273 | be rolled back. ID of changeset is in $HG_NODE. Parent changeset |
|
259 | 274 | IDs are in $HG_PARENT1 and $HG_PARENT2. |
|
260 | 275 | preupdate;; |
|
261 | 276 | Run before updating the working directory. Exit status 0 allows |
|
262 | 277 | the update to proceed. Non-zero status will prevent the update. |
|
263 | 278 | Changeset ID of first new parent is in $HG_PARENT1. If merge, ID |
|
264 | 279 | of second new parent is in $HG_PARENT2. |
|
265 | 280 | tag;; |
|
266 | 281 | Run after a tag is created. ID of tagged changeset is in |
|
267 | 282 | $HG_NODE. Name of tag is in $HG_TAG. Tag is local if |
|
268 | 283 | $HG_LOCAL=1, in repo if $HG_LOCAL=0. |
|
269 | 284 | update;; |
|
270 | 285 | Run after updating the working directory. Changeset ID of first |
|
271 | 286 | new parent is in $HG_PARENT1. If merge, ID of second new parent |
|
272 | 287 | is in $HG_PARENT2. If update succeeded, $HG_ERROR=0. If update |
|
273 | 288 | failed (e.g. because conflicts not resolved), $HG_ERROR=1. |
|
274 | 289 | |
|
275 | 290 | Note: In earlier releases, the names of hook environment variables |
|
276 | 291 | did not have a "HG_" prefix. The old unprefixed names are no longer |
|
277 | 292 | provided in the environment. |
|
278 | 293 | |
|
279 | 294 | The syntax for Python hooks is as follows: |
|
280 | 295 | |
|
281 | 296 | hookname = python:modulename.submodule.callable |
|
282 | 297 | |
|
283 | 298 | Python hooks are run within the Mercurial process. Each hook is |
|
284 | 299 | called with at least three keyword arguments: a ui object (keyword |
|
285 | 300 | "ui"), a repository object (keyword "repo"), and a "hooktype" |
|
286 | 301 | keyword that tells what kind of hook is used. Arguments listed as |
|
287 | 302 | environment variables above are passed as keyword arguments, with no |
|
288 | 303 | "HG_" prefix, and names in lower case. |
|
289 | 304 | |
|
290 | 305 | A Python hook must return a "true" value to succeed. Returning a |
|
291 | 306 | "false" value or raising an exception is treated as failure of the |
|
292 | 307 | hook. |
|
293 | 308 | |
|
294 | 309 | http_proxy:: |
|
295 | 310 | Used to access web-based Mercurial repositories through a HTTP |
|
296 | 311 | proxy. |
|
297 | 312 | host;; |
|
298 | 313 | Host name and (optional) port of the proxy server, for example |
|
299 | 314 | "myproxy:8000". |
|
300 | 315 | no;; |
|
301 | 316 | Optional. Comma-separated list of host names that should bypass |
|
302 | 317 | the proxy. |
|
303 | 318 | passwd;; |
|
304 | 319 | Optional. Password to authenticate with at the proxy server. |
|
305 | 320 | user;; |
|
306 | 321 | Optional. User name to authenticate with at the proxy server. |
|
307 | 322 | |
|
308 | 323 | smtp:: |
|
309 | 324 | Configuration for extensions that need to send email messages. |
|
310 | 325 | host;; |
|
311 | 326 | Host name of mail server, e.g. "mail.example.com". |
|
312 | 327 | port;; |
|
313 | 328 | Optional. Port to connect to on mail server. Default: 25. |
|
314 | 329 | tls;; |
|
315 | 330 | Optional. Whether to connect to mail server using TLS. True or |
|
316 | 331 | False. Default: False. |
|
317 | 332 | username;; |
|
318 | 333 | Optional. User name to authenticate to SMTP server with. |
|
319 | 334 | If username is specified, password must also be specified. |
|
320 | 335 | Default: none. |
|
321 | 336 | password;; |
|
322 | 337 | Optional. Password to authenticate to SMTP server with. |
|
323 | 338 | If username is specified, password must also be specified. |
|
324 | 339 | Default: none. |
|
325 | 340 | local_hostname;; |
|
326 | 341 | Optional. It's the hostname that the sender can use to identify itself |
|
327 | 342 | to the MTA. |
|
328 | 343 | |
|
329 | 344 | paths:: |
|
330 | 345 | Assigns symbolic names to repositories. The left side is the |
|
331 | 346 | symbolic name, and the right gives the directory or URL that is the |
|
332 | 347 | location of the repository. Default paths can be declared by |
|
333 | 348 | setting the following entries. |
|
334 | 349 | default;; |
|
335 | 350 | Directory or URL to use when pulling if no source is specified. |
|
336 | 351 | Default is set to repository from which the current repository |
|
337 | 352 | was cloned. |
|
338 | 353 | default-push;; |
|
339 | 354 | Optional. Directory or URL to use when pushing if no destination |
|
340 | 355 | is specified. |
|
341 | 356 | |
|
342 | 357 | server:: |
|
343 | 358 | Controls generic server settings. |
|
344 | 359 | uncompressed;; |
|
345 | 360 | Whether to allow clients to clone a repo using the uncompressed |
|
346 | 361 | streaming protocol. This transfers about 40% more data than a |
|
347 | 362 | regular clone, but uses less memory and CPU on both server and |
|
348 | 363 | client. Over a LAN (100Mbps or better) or a very fast WAN, an |
|
349 | 364 | uncompressed streaming clone is a lot faster (~10x) than a regular |
|
350 | 365 | clone. Over most WAN connections (anything slower than about |
|
351 | 366 | 6Mbps), uncompressed streaming is slower, because of the extra |
|
352 | 367 | data transfer overhead. Default is False. |
|
353 | 368 | |
|
354 | 369 | trusted:: |
|
355 | 370 | Mercurial will only read the .hg/hgrc file from a repository if |
|
356 | 371 | it belongs to a trusted user or to a trusted group. This section |
|
357 | 372 | specifies what users and groups are trusted. To trust everybody, |
|
358 | 373 | list a user or a group with name "*". |
|
359 | 374 | users;; |
|
360 | 375 | Comma-separated list of trusted users. |
|
361 | 376 | groups;; |
|
362 | 377 | Comma-separated list of trusted groups. |
|
363 | 378 | |
|
364 | 379 | ui:: |
|
365 | 380 | User interface controls. |
|
366 | 381 | debug;; |
|
367 | 382 | Print debugging information. True or False. Default is False. |
|
368 | 383 | editor;; |
|
369 | 384 | The editor to use during a commit. Default is $EDITOR or "vi". |
|
370 | 385 | ignore;; |
|
371 | 386 | A file to read per-user ignore patterns from. This file should be in |
|
372 | 387 | the same format as a repository-wide .hgignore file. This option |
|
373 | 388 | supports hook syntax, so if you want to specify multiple ignore |
|
374 | 389 | files, you can do so by setting something like |
|
375 | 390 | "ignore.other = ~/.hgignore2". For details of the ignore file |
|
376 | 391 | format, see the hgignore(5) man page. |
|
377 | 392 | interactive;; |
|
378 | 393 | Allow to prompt the user. True or False. Default is True. |
|
379 | 394 | logtemplate;; |
|
380 | 395 | Template string for commands that print changesets. |
|
381 | 396 | style;; |
|
382 | 397 | Name of style to use for command output. |
|
383 | 398 | merge;; |
|
384 | 399 | The conflict resolution program to use during a manual merge. |
|
385 | 400 | Default is "hgmerge". |
|
386 | 401 | quiet;; |
|
387 | 402 | Reduce the amount of output printed. True or False. Default is False. |
|
388 | 403 | remotecmd;; |
|
389 | 404 | remote command to use for clone/push/pull operations. Default is 'hg'. |
|
390 | 405 | ssh;; |
|
391 | 406 | command to use for SSH connections. Default is 'ssh'. |
|
392 | 407 | strict;; |
|
393 | 408 | Require exact command names, instead of allowing unambiguous |
|
394 | 409 | abbreviations. True or False. Default is False. |
|
395 | 410 | timeout;; |
|
396 | 411 | The timeout used when a lock is held (in seconds), a negative value |
|
397 | 412 | means no timeout. Default is 600. |
|
398 | 413 | username;; |
|
399 | 414 | The committer of a changeset created when running "commit". |
|
400 | 415 | Typically a person's name and email address, e.g. "Fred Widget |
|
401 | 416 | <fred@example.com>". Default is $EMAIL or username@hostname, unless |
|
402 | 417 | username is set to an empty string, which enforces specifying the |
|
403 | 418 | username manually. |
|
404 | 419 | verbose;; |
|
405 | 420 | Increase the amount of output printed. True or False. Default is False. |
|
406 | 421 | |
|
407 | 422 | |
|
408 | 423 | web:: |
|
409 | 424 | Web interface configuration. |
|
410 | 425 | accesslog;; |
|
411 | 426 | Where to output the access log. Default is stdout. |
|
412 | 427 | address;; |
|
413 | 428 | Interface address to bind to. Default is all. |
|
414 | 429 | allow_archive;; |
|
415 | 430 | List of archive format (bz2, gz, zip) allowed for downloading. |
|
416 | 431 | Default is empty. |
|
417 | 432 | allowbz2;; |
|
418 | 433 | (DEPRECATED) Whether to allow .tar.bz2 downloading of repo revisions. |
|
419 | 434 | Default is false. |
|
420 | 435 | allowgz;; |
|
421 | 436 | (DEPRECATED) Whether to allow .tar.gz downloading of repo revisions. |
|
422 | 437 | Default is false. |
|
423 | 438 | allowpull;; |
|
424 | 439 | Whether to allow pulling from the repository. Default is true. |
|
425 | 440 | allow_push;; |
|
426 | 441 | Whether to allow pushing to the repository. If empty or not set, |
|
427 | 442 | push is not allowed. If the special value "*", any remote user |
|
428 | 443 | can push, including unauthenticated users. Otherwise, the remote |
|
429 | 444 | user must have been authenticated, and the authenticated user name |
|
430 | 445 | must be present in this list (separated by whitespace or ","). |
|
431 | 446 | The contents of the allow_push list are examined after the |
|
432 | 447 | deny_push list. |
|
433 | 448 | allowzip;; |
|
434 | 449 | (DEPRECATED) Whether to allow .zip downloading of repo revisions. |
|
435 | 450 | Default is false. This feature creates temporary files. |
|
436 | 451 | baseurl;; |
|
437 | 452 | Base URL to use when publishing URLs in other locations, so |
|
438 | 453 | third-party tools like email notification hooks can construct URLs. |
|
439 | 454 | Example: "http://hgserver/repos/" |
|
440 | 455 | contact;; |
|
441 | 456 | Name or email address of the person in charge of the repository. |
|
442 | 457 | Default is "unknown". |
|
443 | 458 | deny_push;; |
|
444 | 459 | Whether to deny pushing to the repository. If empty or not set, |
|
445 | 460 | push is not denied. If the special value "*", all remote users |
|
446 | 461 | are denied push. Otherwise, unauthenticated users are all denied, |
|
447 | 462 | and any authenticated user name present in this list (separated by |
|
448 | 463 | whitespace or ",") is also denied. The contents of the deny_push |
|
449 | 464 | list are examined before the allow_push list. |
|
450 | 465 | description;; |
|
451 | 466 | Textual description of the repository's purpose or contents. |
|
452 | 467 | Default is "unknown". |
|
453 | 468 | errorlog;; |
|
454 | 469 | Where to output the error log. Default is stderr. |
|
455 | 470 | ipv6;; |
|
456 | 471 | Whether to use IPv6. Default is false. |
|
457 | 472 | name;; |
|
458 | 473 | Repository name to use in the web interface. Default is current |
|
459 | 474 | working directory. |
|
460 | 475 | maxchanges;; |
|
461 | 476 | Maximum number of changes to list on the changelog. Default is 10. |
|
462 | 477 | maxfiles;; |
|
463 | 478 | Maximum number of files to list per changeset. Default is 10. |
|
464 | 479 | port;; |
|
465 | 480 | Port to listen on. Default is 8000. |
|
466 | 481 | push_ssl;; |
|
467 | 482 | Whether to require that inbound pushes be transported over SSL to |
|
468 | 483 | prevent password sniffing. Default is true. |
|
469 | 484 | stripes;; |
|
470 | 485 | How many lines a "zebra stripe" should span in multiline output. |
|
471 | 486 | Default is 1; set to 0 to disable. |
|
472 | 487 | style;; |
|
473 | 488 | Which template map style to use. |
|
474 | 489 | templates;; |
|
475 | 490 | Where to find the HTML templates. Default is install path. |
|
476 | 491 | |
|
477 | 492 | |
|
478 | 493 | AUTHOR |
|
479 | 494 | ------ |
|
480 | 495 | Bryan O'Sullivan <bos@serpentine.com>. |
|
481 | 496 | |
|
482 | 497 | Mercurial was written by Matt Mackall <mpm@selenic.com>. |
|
483 | 498 | |
|
484 | 499 | SEE ALSO |
|
485 | 500 | -------- |
|
486 | 501 | hg(1), hgignore(5) |
|
487 | 502 | |
|
488 | 503 | COPYING |
|
489 | 504 | ------- |
|
490 | 505 | This manual page is copyright 2005 Bryan O'Sullivan. |
|
491 | 506 | Mercurial is copyright 2005, 2006 Matt Mackall. |
|
492 | 507 | Free use of this software is granted under the terms of the GNU General |
|
493 | 508 | Public License (GPL). |
General Comments 0
You need to be logged in to leave comments.
Login now