subrepo: introduce basic state parsing

mercurial/subrepo.py

@@ -0,0 +1,35
+# subrepo.py - sub-repository handling for Mercurial
+#
+# Copyright 2006, 2007 Matt Mackall <[e-mail]>
+#
+# This software may be used and distributed according to the terms of the
+# GNU General Public License version 2, incorporated herein by reference.
+
+import config, util, errno
+
+def state(ctx):
+    p = config.config()
+    def read(f, sections=None, remap=None):
+        if f in ctx:
+            try:
+                p.parse(f, ctx[f].data(), sections, remap)
+            except IOError, err:
+                if err.errno != errno.ENOENT:
+                    raise
+    read('.hgsub')
+
+    rev = {}
+    if '.hgsubstate' in ctx:
+        try:
+            for l in ctx['.hgsubstate'].data().splitlines():
+                revision, path = l.split()
+                rev[path] = revision
+        except IOError, err:
+            if err.errno != errno.ENOENT:
+                raise
+
+    state = {}
+    for path, src in p[''].items():
+        state[path] = (src, rev.get(path, ''))
+
+    return state

mercurial/commands.py

@@ -1,3485 +1,3497
 # commands.py - command processing for mercurial
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
 from node import hex, nullid, nullrev, short
 from lock import release
 from i18n import _, gettext
 import os, re, sys, textwrap, subprocess, difflib, time
 import hg, util, revlog, bundlerepo, extensions, copies, context, error
 import patch, help, mdiff, tempfile, url, encoding
 import archival, changegroup, cmdutil, sshserver, hbisect
 from hgweb import server
 import merge as merge_
 
 # Commands start here, listed alphabetically
 
 def add(ui, repo, *pats, **opts):
     """add the specified files on the next commit
 
     Schedule files to be version controlled and added to the
     repository.
 
     The files will be added to the repository at the next commit. To
     undo an add before that, see hg revert.
 
     If no names are given, add all files to the repository.
     """
 
     bad = []
     exacts = {}
     names = []
     m = cmdutil.match(repo, pats, opts)
     oldbad = m.bad
     m.bad = lambda x,y: bad.append(x) or oldbad(x,y)
 
     for f in repo.walk(m):
         exact = m.exact(f)
         if exact or f not in repo.dirstate:
             names.append(f)
             if ui.verbose or not exact:
                 ui.status(_('adding %s\n') % m.rel(f))
     if not opts.get('dry_run'):
         bad += [f for f in repo.add(names) if f in m.files()]
     return bad and 1 or 0
 
 def addremove(ui, repo, *pats, **opts):
     """add all new files, delete all missing files
 
     Add all new files and remove all missing files from the
     repository.
 
     New files are ignored if they match any of the patterns in
     .hgignore. As with add, these changes take effect at the next
     commit.
 
     Use the -s/--similarity option to detect renamed files. With a
     parameter > 0, this compares every removed file with every added
     file and records those similar enough as renames. This option
     takes a percentage between 0 (disabled) and 100 (files must be
     identical) as its parameter. Detecting renamed files this way can
     be expensive.
     """
     try:
         sim = float(opts.get('similarity') or 0)
     except ValueError:
         raise util.Abort(_('similarity must be a number'))
     if sim < 0 or sim > 100:
         raise util.Abort(_('similarity must be between 0 and 100'))
     return cmdutil.addremove(repo, pats, opts, similarity=sim/100.)
 
 def annotate(ui, repo, *pats, **opts):
     """show changeset information by line for each file
 
     List changes in files, showing the revision id responsible for
     each line
 
     This command is useful for discovering when a change was made and
     by whom.
 
     Without the -a/--text option, annotate will avoid processing files
     it detects as binary. With -a, annotate will annotate the file
     anyway, although the results will probably be neither useful
     nor desirable.
     """
     datefunc = ui.quiet and util.shortdate or util.datestr
     getdate = util.cachefunc(lambda x: datefunc(x[0].date()))
 
     if not pats:
         raise util.Abort(_('at least one filename or pattern is required'))
 
     opmap = [('user', lambda x: ui.shortuser(x[0].user())),
              ('number', lambda x: str(x[0].rev())),
              ('changeset', lambda x: short(x[0].node())),
              ('date', getdate),
              ('follow', lambda x: x[0].path()),
             ]
 
     if (not opts.get('user') and not opts.get('changeset') and not opts.get('date')
         and not opts.get('follow')):
         opts['number'] = 1
 
     linenumber = opts.get('line_number') is not None
     if (linenumber and (not opts.get('changeset')) and (not opts.get('number'))):
         raise util.Abort(_('at least one of -n/-c is required for -l'))
 
     funcmap = [func for op, func in opmap if opts.get(op)]
     if linenumber:
         lastfunc = funcmap[-1]
         funcmap[-1] = lambda x: "%s:%s" % (lastfunc(x), x[1])
 
     ctx = repo[opts.get('rev')]
 
     m = cmdutil.match(repo, pats, opts)
     for abs in ctx.walk(m):
         fctx = ctx[abs]
         if not opts.get('text') and util.binary(fctx.data()):
             ui.write(_("%s: binary file\n") % ((pats and m.rel(abs)) or abs))
             continue
 
         lines = fctx.annotate(follow=opts.get('follow'),
                               linenumber=linenumber)
         pieces = []
 
         for f in funcmap:
             l = [f(n) for n, dummy in lines]
             if l:
                 ml = max(map(len, l))
                 pieces.append(["%*s" % (ml, x) for x in l])
 
         if pieces:
             for p, l in zip(zip(*pieces), lines):
                 ui.write("%s: %s" % (" ".join(p), l[1]))
 
 def archive(ui, repo, dest, **opts):
     '''create an unversioned archive of a repository revision
 
     By default, the revision used is the parent of the working
     directory; use -r/--rev to specify a different revision.
 
     To specify the type of archive to create, use -t/--type. Valid
     types are:
 
     "files" (default): a directory full of files
     "tar": tar archive, uncompressed
     "tbz2": tar archive, compressed using bzip2
     "tgz": tar archive, compressed using gzip
     "uzip": zip archive, uncompressed
     "zip": zip archive, compressed using deflate
 
     The exact name of the destination archive or directory is given
     using a format string; see 'hg help export' for details.
 
     Each member added to an archive file has a directory prefix
     prepended. Use -p/--prefix to specify a format string for the
     prefix. The default is the basename of the archive, with suffixes
     removed.
     '''
 
     ctx = repo[opts.get('rev')]
     if not ctx:
         raise util.Abort(_('no working directory: please specify a revision'))
     node = ctx.node()
     dest = cmdutil.make_filename(repo, dest, node)
     if os.path.realpath(dest) == repo.root:
         raise util.Abort(_('repository root cannot be destination'))
     matchfn = cmdutil.match(repo, [], opts)
     kind = opts.get('type') or 'files'
     prefix = opts.get('prefix')
     if dest == '-':
         if kind == 'files':
             raise util.Abort(_('cannot archive plain files to stdout'))
         dest = sys.stdout
         if not prefix: prefix = os.path.basename(repo.root) + '-%h'
     prefix = cmdutil.make_filename(repo, prefix, node)
     archival.archive(repo, dest, node, kind, not opts.get('no_decode'),
                      matchfn, prefix)
 
 def backout(ui, repo, node=None, rev=None, **opts):
     '''reverse effect of earlier changeset
 
     Commit the backed out changes as a new changeset. The new
     changeset is a child of the backed out changeset.
 
     If you backout a changeset other than the tip, a new head is
     created. This head will be the new tip and you should merge this
     backout changeset with another head.
 
     The --merge option remembers the parent of the working directory
     before starting the backout, then merges the new head with that
     changeset afterwards. This saves you from doing the merge by hand.
     The result of this merge is not committed, as with a normal merge.
 
     See 'hg help dates' for a list of formats valid for -d/--date.
     '''
     if rev and node:
         raise util.Abort(_("please specify just one revision"))
 
     if not rev:
         rev = node
 
     if not rev:
         raise util.Abort(_("please specify a revision to backout"))
 
     date = opts.get('date')
     if date:
         opts['date'] = util.parsedate(date)
 
     cmdutil.bail_if_changed(repo)
     node = repo.lookup(rev)
 
     op1, op2 = repo.dirstate.parents()
     a = repo.changelog.ancestor(op1, node)
     if a != node:
         raise util.Abort(_('cannot backout change on a different branch'))
 
     p1, p2 = repo.changelog.parents(node)
     if p1 == nullid:
         raise util.Abort(_('cannot backout a change with no parents'))
     if p2 != nullid:
         if not opts.get('parent'):
             raise util.Abort(_('cannot backout a merge changeset without '
                                '--parent'))
         p = repo.lookup(opts['parent'])
         if p not in (p1, p2):
             raise util.Abort(_('%s is not a parent of %s') %
                              (short(p), short(node)))
         parent = p
     else:
         if opts.get('parent'):
             raise util.Abort(_('cannot use --parent on non-merge changeset'))
         parent = p1
 
     # the backout should appear on the same branch
     branch = repo.dirstate.branch()
     hg.clean(repo, node, show_stats=False)
     repo.dirstate.setbranch(branch)
     revert_opts = opts.copy()
     revert_opts['date'] = None
     revert_opts['all'] = True
     revert_opts['rev'] = hex(parent)
     revert_opts['no_backup'] = None
     revert(ui, repo, **revert_opts)
     commit_opts = opts.copy()
     commit_opts['addremove'] = False
     if not commit_opts['message'] and not commit_opts['logfile']:
         commit_opts['message'] = _("Backed out changeset %s") % (short(node))
         commit_opts['force_editor'] = True
     commit(ui, repo, **commit_opts)
     def nice(node):
         return '%d:%s' % (repo.changelog.rev(node), short(node))
     ui.status(_('changeset %s backs out changeset %s\n') %
               (nice(repo.changelog.tip()), nice(node)))
     if op1 != node:
         hg.clean(repo, op1, show_stats=False)
         if opts.get('merge'):
             ui.status(_('merging with changeset %s\n') % nice(repo.changelog.tip()))
             hg.merge(repo, hex(repo.changelog.tip()))
         else:
             ui.status(_('the backout changeset is a new head - '
                         'do not forget to merge\n'))
             ui.status(_('(use "backout --merge" '
                         'if you want to auto-merge)\n'))
 
 def bisect(ui, repo, rev=None, extra=None, command=None,
                reset=None, good=None, bad=None, skip=None, noupdate=None):
     """subdivision search of changesets
 
     This command helps to find changesets which introduce problems. To
     use, mark the earliest changeset you know exhibits the problem as
     bad, then mark the latest changeset which is free from the problem
     as good. Bisect will update your working directory to a revision
     for testing (unless the -U/--noupdate option is specified). Once
     you have performed tests, mark the working directory as good or
     bad, and bisect will either update to another candidate changeset
     or announce that it has found the bad revision.
 
     As a shortcut, you can also use the revision argument to mark a
     revision as good or bad without checking it out first.
 
     If you supply a command, it will be used for automatic bisection.
     Its exit status will be used to mark revisions as good or bad:
     status 0 means good, 125 means to skip the revision, 127
     (command not found) will abort the bisection, and any other
     non-zero exit status means the revision is bad.
     """
     def print_result(nodes, good):
         displayer = cmdutil.show_changeset(ui, repo, {})
         if len(nodes) == 1:
             # narrowed it down to a single revision
             if good:
                 ui.write(_("The first good revision is:\n"))
             else:
                 ui.write(_("The first bad revision is:\n"))
             displayer.show(repo[nodes[0]])
         else:
             # multiple possible revisions
             if good:
                 ui.write(_("Due to skipped revisions, the first "
                         "good revision could be any of:\n"))
             else:
                 ui.write(_("Due to skipped revisions, the first "
                         "bad revision could be any of:\n"))
             for n in nodes:
                 displayer.show(repo[n])
 
     def check_state(state, interactive=True):
         if not state['good'] or not state['bad']:
             if (good or bad or skip or reset) and interactive:
                 return
             if not state['good']:
                 raise util.Abort(_('cannot bisect (no known good revisions)'))
             else:
                 raise util.Abort(_('cannot bisect (no known bad revisions)'))
         return True
 
     # backward compatibility
     if rev in "good bad reset init".split():
         ui.warn(_("(use of 'hg bisect <cmd>' is deprecated)\n"))
         cmd, rev, extra = rev, extra, None
         if cmd == "good":
             good = True
         elif cmd == "bad":
             bad = True
         else:
             reset = True
     elif extra or good + bad + skip + reset + bool(command) > 1:
         raise util.Abort(_('incompatible arguments'))
 
     if reset:
         p = repo.join("bisect.state")
         if os.path.exists(p):
             os.unlink(p)
         return
 
     state = hbisect.load_state(repo)
 
     if command:
         commandpath = util.find_exe(command)
         if commandpath is None:
             raise util.Abort(_("cannot find executable: %s") % command)
         changesets = 1
         try:
             while changesets:
                 # update state
                 status = subprocess.call([commandpath])
                 if status == 125:
                     transition = "skip"
                 elif status == 0:
                     transition = "good"
                 # status < 0 means process was killed
                 elif status == 127:
                     raise util.Abort(_("failed to execute %s") % command)
                 elif status < 0:
                     raise util.Abort(_("%s killed") % command)
                 else:
                     transition = "bad"
                 ctx = repo[rev or '.']
                 state[transition].append(ctx.node())
                 ui.status(_('Changeset %d:%s: %s\n') % (ctx, ctx, transition))
                 check_state(state, interactive=False)
                 # bisect
                 nodes, changesets, good = hbisect.bisect(repo.changelog, state)
                 # update to next check
                 cmdutil.bail_if_changed(repo)
                 hg.clean(repo, nodes[0], show_stats=False)
         finally:
             hbisect.save_state(repo, state)
         return print_result(nodes, not status)
 
     # update state
     node = repo.lookup(rev or '.')
     if good:
         state['good'].append(node)
     elif bad:
         state['bad'].append(node)
     elif skip:
         state['skip'].append(node)
 
     hbisect.save_state(repo, state)
 
     if not check_state(state):
         return
 
     # actually bisect
     nodes, changesets, good = hbisect.bisect(repo.changelog, state)
     if changesets == 0:
         print_result(nodes, good)
     else:
         assert len(nodes) == 1 # only a single node can be tested next
         node = nodes[0]
         # compute the approximate number of remaining tests
         tests, size = 0, 2
         while size <= changesets:
             tests, size = tests + 1, size * 2
         rev = repo.changelog.rev(node)
         ui.write(_("Testing changeset %s:%s "
                    "(%s changesets remaining, ~%s tests)\n")
                  % (rev, short(node), changesets, tests))
         if not noupdate:
             cmdutil.bail_if_changed(repo)
             return hg.clean(repo, node)
 
 def branch(ui, repo, label=None, **opts):
     """set or show the current branch name
 
     With no argument, show the current branch name. With one argument,
     set the working directory branch name (the branch will not exist
     in the repository until the next commit). Standard practice
     recommends that primary development take place on the 'default'
     branch.
 
     Unless -f/--force is specified, branch will not let you set a
     branch name that already exists, even if it's inactive.
 
     Use -C/--clean to reset the working directory branch to that of
     the parent of the working directory, negating a previous branch
     change.
 
     Use the command 'hg update' to switch to an existing branch.
     """
 
     if opts.get('clean'):
         label = repo[None].parents()[0].branch()
         repo.dirstate.setbranch(label)
         ui.status(_('reset working directory to branch %s\n') % label)
     elif label:
         if not opts.get('force') and label in repo.branchtags():
             if label not in [p.branch() for p in repo.parents()]:
                 raise util.Abort(_('a branch of the same name already exists'
                                    ' (use --force to override)'))
         repo.dirstate.setbranch(encoding.fromlocal(label))
         ui.status(_('marked working directory as branch %s\n') % label)
     else:
         ui.write("%s\n" % encoding.tolocal(repo.dirstate.branch()))
 
 def branches(ui, repo, active=False):
     """list repository named branches
 
     List the repository's named branches, indicating which ones are
     inactive. If active is specified, only show active branches.
 
     A branch is considered active if it contains repository heads.
 
     Use the command 'hg update' to switch to an existing branch.
     """
     hexfunc = ui.debugflag and hex or short
     activebranches = [encoding.tolocal(repo[n].branch())
                             for n in repo.heads()]
     def testactive(tag, node):
         realhead = tag in activebranches
         open = node in repo.branchheads(tag, closed=False)
         return realhead and open
     branches = sorted([(testactive(tag, node), repo.changelog.rev(node), tag)
                           for tag, node in repo.branchtags().items()],
                       reverse=True)
 
     for isactive, node, tag in branches:
         if (not active) or isactive:
             if ui.quiet:
                 ui.write("%s\n" % tag)
             else:
                 hn = repo.lookup(node)
                 if isactive:
                     notice = ''
                 elif hn not in repo.branchheads(tag, closed=False):
                     notice = ' (closed)'
                 else:
                     notice = ' (inactive)'
                 rev = str(node).rjust(31 - encoding.colwidth(tag))
                 data = tag, rev, hexfunc(hn), notice
                 ui.write("%s %s:%s%s\n" % data)
 
 def bundle(ui, repo, fname, dest=None, **opts):
     """create a changegroup file
 
     Generate a compressed changegroup file collecting changesets not
     known to be in another repository.
 
     If no destination repository is specified the destination is
     assumed to have all the nodes specified by one or more --base
     parameters. To create a bundle containing all changesets, use
     -a/--all (or --base null). To change the compression method
     applied, use the -t/--type option (by default, bundles are
     compressed using bz2).
 
     The bundle file can then be transferred using conventional means
     and applied to another repository with the unbundle or pull
     command. This is useful when direct push and pull are not
     available or when exporting an entire repository is undesirable.
 
     Applying bundles preserves all changeset contents including
     permissions, copy/rename information, and revision history.
     """
     revs = opts.get('rev') or None
     if revs:
         revs = [repo.lookup(rev) for rev in revs]
     if opts.get('all'):
         base = ['null']
     else:
         base = opts.get('base')
     if base:
         if dest:
             raise util.Abort(_("--base is incompatible with specifying "
                                "a destination"))
         base = [repo.lookup(rev) for rev in base]
         # create the right base
         # XXX: nodesbetween / changegroup* should be "fixed" instead
         o = []
         has = set((nullid,))
         for n in base:
             has.update(repo.changelog.reachable(n))
         if revs:
             visit = list(revs)
         else:
             visit = repo.changelog.heads()
         seen = {}
         while visit:
             n = visit.pop(0)
             parents = [p for p in repo.changelog.parents(n) if p not in has]
             if len(parents) == 0:
                 o.insert(0, n)
             else:
                 for p in parents:
                     if p not in seen:
                         seen[p] = 1
                         visit.append(p)
     else:
         dest, revs, checkout = hg.parseurl(
             ui.expandpath(dest or 'default-push', dest or 'default'), revs)
         other = hg.repository(cmdutil.remoteui(repo, opts), dest)
         o = repo.findoutgoing(other, force=opts.get('force'))
 
     if revs:
         cg = repo.changegroupsubset(o, revs, 'bundle')
     else:
         cg = repo.changegroup(o, 'bundle')
 
     bundletype = opts.get('type', 'bzip2').lower()
     btypes = {'none': 'HG10UN', 'bzip2': 'HG10BZ', 'gzip': 'HG10GZ'}
     bundletype = btypes.get(bundletype)
     if bundletype not in changegroup.bundletypes:
         raise util.Abort(_('unknown bundle type specified with --type'))
 
     changegroup.writebundle(cg, fname, bundletype)
 
 def cat(ui, repo, file1, *pats, **opts):
     """output the current or given revision of files
 
     Print the specified files as they were at the given revision. If
     no revision is given, the parent of the working directory is used,
     or tip if no revision is checked out.
 
     Output may be to a file, in which case the name of the file is
     given using a format string. The formatting rules are the same as
     for the export command, with the following additions:
 
     %s   basename of file being printed
     %d   dirname of file being printed, or '.' if in repository root
     %p   root-relative path name of file being printed
     """
     ctx = repo[opts.get('rev')]
     err = 1
     m = cmdutil.match(repo, (file1,) + pats, opts)
     for abs in ctx.walk(m):
         fp = cmdutil.make_file(repo, opts.get('output'), ctx.node(), pathname=abs)
         data = ctx[abs].data()
         if opts.get('decode'):
             data = repo.wwritedata(abs, data)
         fp.write(data)
         err = 0
     return err
 
 def clone(ui, source, dest=None, **opts):
     """make a copy of an existing repository
 
     Create a copy of an existing repository in a new directory.
 
     If no destination directory name is specified, it defaults to the
     basename of the source.
 
     The location of the source is added to the new repository's
     .hg/hgrc file, as the default to be used for future pulls.
 
     If you use the -r/--rev option to clone up to a specific revision,
     no subsequent revisions (including subsequent tags) will be
     present in the cloned repository. This option implies --pull, even
     on local repositories.
 
     By default, clone will check out the head of the 'default' branch.
     If the -U/--noupdate option is used, the new clone will contain
     only a repository (.hg) and no working copy (the working copy
     parent is the null revision).
 
     See 'hg help urls' for valid source format details.
 
     It is possible to specify an ssh:// URL as the destination, but no
     .hg/hgrc and working directory will be created on the remote side.
     Please see 'hg help urls' for important details about ssh:// URLs.
 
     For efficiency, hardlinks are used for cloning whenever the source
     and destination are on the same filesystem (note this applies only
     to the repository data, not to the checked out files). Some
     filesystems, such as AFS, implement hardlinking incorrectly, but
     do not report errors. In these cases, use the --pull option to
     avoid hardlinking.
 
     In some cases, you can clone repositories and checked out files
     using full hardlinks with
 
       $ cp -al REPO REPOCLONE
 
     This is the fastest way to clone, but it is not always safe. The
     operation is not atomic (making sure REPO is not modified during
     the operation is up to you) and you have to make sure your editor
     breaks hardlinks (Emacs and most Linux Kernel tools do so). Also,
     this is not compatible with certain extensions that place their
     metadata under the .hg directory, such as mq.
 
     """
     hg.clone(cmdutil.remoteui(ui, opts), source, dest,
              pull=opts.get('pull'),
              stream=opts.get('uncompressed'),
              rev=opts.get('rev'),
              update=not opts.get('noupdate'))
 
 def commit(ui, repo, *pats, **opts):
     """commit the specified files or all outstanding changes
 
     Commit changes to the given files into the repository. Unlike a
     centralized RCS, this operation is a local operation. See hg push
     for a way to actively distribute your changes.
 
     If a list of files is omitted, all changes reported by "hg status"
     will be committed.
 
     If you are committing the result of a merge, do not provide any
     filenames or -I/-X filters.
 
     If no commit message is specified, the configured editor is
     started to prompt you for a message.
 
     See 'hg help dates' for a list of formats valid for -d/--date.
     """
     extra = {}
     if opts.get('close_branch'):
         extra['close'] = 1
     e = cmdutil.commiteditor
     if opts.get('force_editor'):
         e = cmdutil.commitforceeditor
 
     def commitfunc(ui, repo, message, match, opts):
         return repo.commit(message, opts.get('user'), opts.get('date'), match,
                            editor=e, extra=extra)
 
     node = cmdutil.commit(ui, repo, commitfunc, pats, opts)
     if not node:
         return
     cl = repo.changelog
     rev = cl.rev(node)
     parents = cl.parentrevs(rev)
     if rev - 1 in parents:
         # one of the parents was the old tip
         pass
     elif (parents == (nullrev, nullrev) or
           len(cl.heads(cl.node(parents[0]))) > 1 and
           (parents[1] == nullrev or len(cl.heads(cl.node(parents[1]))) > 1)):
         ui.status(_('created new head\n'))
 
     if ui.debugflag:
         ui.write(_('committed changeset %d:%s\n') % (rev,hex(node)))
     elif ui.verbose:
         ui.write(_('committed changeset %d:%s\n') % (rev,short(node)))
 
 def copy(ui, repo, *pats, **opts):
     """mark files as copied for the next commit
 
     Mark dest as having copies of source files. If dest is a
     directory, copies are put in that directory. If dest is a file,
     the source must be a single file.
 
     By default, this command copies the contents of files as they
     exist in the working directory. If invoked with -A/--after, the
     operation is recorded, but no copying is performed.
 
     This command takes effect with the next commit. To undo a copy
     before that, see hg revert.
     """
     wlock = repo.wlock(False)
     try:
         return cmdutil.copy(ui, repo, pats, opts)
     finally:
         wlock.release()
 
 def debugancestor(ui, repo, *args):
     """find the ancestor revision of two revisions in a given index"""
     if len(args) == 3:
         index, rev1, rev2 = args
         r = revlog.revlog(util.opener(os.getcwd(), audit=False), index)
         lookup = r.lookup
     elif len(args) == 2:
         if not repo:
             raise util.Abort(_("There is no Mercurial repository here "
                                "(.hg not found)"))
         rev1, rev2 = args
         r = repo.changelog
         lookup = repo.lookup
     else:
         raise util.Abort(_('either two or three arguments required'))
     a = r.ancestor(lookup(rev1), lookup(rev2))
     ui.write("%d:%s\n" % (r.rev(a), hex(a)))
 
 def debugcommands(ui, cmd='', *args):
     for cmd, vals in sorted(table.iteritems()):
         cmd = cmd.split('|')[0].strip('^')
         opts = ', '.join([i[1] for i in vals[1]])
         ui.write('%s: %s\n' % (cmd, opts))
 
 def debugcomplete(ui, cmd='', **opts):
     """returns the completion list associated with the given command"""
 
     if opts.get('options'):
         options = []
         otables = [globalopts]
         if cmd:
             aliases, entry = cmdutil.findcmd(cmd, table, False)
             otables.append(entry[1])
         for t in otables:
             for o in t:
                 if o[0]:
                     options.append('-%s' % o[0])
                 options.append('--%s' % o[1])
         ui.write("%s\n" % "\n".join(options))
         return
 
     cmdlist = cmdutil.findpossible(cmd, table)
     if ui.verbose:
         cmdlist = [' '.join(c[0]) for c in cmdlist.values()]
     ui.write("%s\n" % "\n".join(sorted(cmdlist)))
 
 def debugfsinfo(ui, path = "."):
     file('.debugfsinfo', 'w').write('')
     ui.write('exec: %s\n' % (util.checkexec(path) and 'yes' or 'no'))
     ui.write('symlink: %s\n' % (util.checklink(path) and 'yes' or 'no'))
     ui.write('case-sensitive: %s\n' % (util.checkcase('.debugfsinfo')
                                 and 'yes' or 'no'))
     os.unlink('.debugfsinfo')
 
 def debugrebuildstate(ui, repo, rev="tip"):
     """rebuild the dirstate as it would look like for the given revision"""
     ctx = repo[rev]
     wlock = repo.wlock()
     try:
         repo.dirstate.rebuild(ctx.node(), ctx.manifest())
     finally:
         wlock.release()
 
 def debugcheckstate(ui, repo):
     """validate the correctness of the current dirstate"""
     parent1, parent2 = repo.dirstate.parents()
     m1 = repo[parent1].manifest()
     m2 = repo[parent2].manifest()
     errors = 0
     for f in repo.dirstate:
         state = repo.dirstate[f]
         if state in "nr" and f not in m1:
             ui.warn(_("%s in state %s, but not in manifest1\n") % (f, state))
             errors += 1
         if state in "a" and f in m1:
             ui.warn(_("%s in state %s, but also in manifest1\n") % (f, state))
             errors += 1
         if state in "m" and f not in m1 and f not in m2:
             ui.warn(_("%s in state %s, but not in either manifest\n") %
                     (f, state))
             errors += 1
     for f in m1:
         state = repo.dirstate[f]
         if state not in "nrm":
             ui.warn(_("%s in manifest1, but listed as state %s") % (f, state))
             errors += 1
     if errors:
         error = _(".hg/dirstate inconsistent with current parent's manifest")
         raise util.Abort(error)
 
 def showconfig(ui, repo, *values, **opts):
     """show combined config settings from all hgrc files
 
     With no arguments, print names and values of all config items.
 
     With one argument of the form section.name, print just the value
     of that config item.
 
     With multiple arguments, print names and values of all config
     items with matching section names.
 
     With --debug, the source (filename and line number) is printed
     for each config item.
     """
 
     untrusted = bool(opts.get('untrusted'))
     if values:
         if len([v for v in values if '.' in v]) > 1:
             raise util.Abort(_('only one config item permitted'))
     for section, name, value in ui.walkconfig(untrusted=untrusted):
         sectname = section + '.' + name
         if values:
             for v in values:
                 if v == section:
                     ui.debug('%s: ' %
                              ui.configsource(section, name, untrusted))
                     ui.write('%s=%s\n' % (sectname, value))
                 elif v == sectname:
                     ui.debug('%s: ' %
                              ui.configsource(section, name, untrusted))
                     ui.write(value, '\n')
         else:
             ui.debug('%s: ' %
                      ui.configsource(section, name, untrusted))
             ui.write('%s=%s\n' % (sectname, value))
 
 def debugsetparents(ui, repo, rev1, rev2=None):
     """manually set the parents of the current working directory
 
     This is useful for writing repository conversion tools, but should
     be used with care.
     """
 
     if not rev2:
         rev2 = hex(nullid)
 
     wlock = repo.wlock()
     try:
         repo.dirstate.setparents(repo.lookup(rev1), repo.lookup(rev2))
     finally:
         wlock.release()
 
 def debugstate(ui, repo, nodates=None):
     """show the contents of the current dirstate"""
     timestr = ""
     showdate = not nodates
     for file_, ent in sorted(repo.dirstate._map.iteritems()):
         if showdate:
             if ent[3] == -1:
                 # Pad or slice to locale representation
                 locale_len = len(time.strftime("%Y-%m-%d %H:%M:%S ", time.localtime(0)))
                 timestr = 'unset'
                 timestr = timestr[:locale_len] + ' '*(locale_len - len(timestr))
             else:
                 timestr = time.strftime("%Y-%m-%d %H:%M:%S ", time.localtime(ent[3]))
         if ent[1] & 020000:
             mode = 'lnk'
         else:
             mode = '%3o' % (ent[1] & 0777)
         ui.write("%c %s %10d %s%s\n" % (ent[0], mode, ent[2], timestr, file_))
     for f in repo.dirstate.copies():
         ui.write(_("copy: %s -> %s\n") % (repo.dirstate.copied(f), f))
 
+def debugsub(ui, repo, rev=None):
+    if rev == '':
+        rev = None
+    for k,v in sorted(repo[rev].substate.items()):
+        ui.write('path %s\n' % k)
+        ui.write(' source   %s\n' % v[0])
+        ui.write(' revision %s\n' % v[1])
+
 def debugdata(ui, file_, rev):
     """dump the contents of a data file revision"""
     r = revlog.revlog(util.opener(os.getcwd(), audit=False), file_[:-2] + ".i")
     try:
         ui.write(r.revision(r.lookup(rev)))
     except KeyError:
         raise util.Abort(_('invalid revision identifier %s') % rev)
 
 def debugdate(ui, date, range=None, **opts):
     """parse and display a date"""
     if opts["extended"]:
         d = util.parsedate(date, util.extendeddateformats)
     else:
         d = util.parsedate(date)
     ui.write("internal: %s %s\n" % d)
     ui.write("standard: %s\n" % util.datestr(d))
     if range:
         m = util.matchdate(range)
         ui.write("match: %s\n" % m(d[0]))
 
 def debugindex(ui, file_):
     """dump the contents of an index file"""
     r = revlog.revlog(util.opener(os.getcwd(), audit=False), file_)
     ui.write("   rev    offset  length   base linkrev"
              " nodeid       p1           p2\n")
     for i in r:
         node = r.node(i)
         try:
             pp = r.parents(node)
         except:
             pp = [nullid, nullid]
         ui.write("% 6d % 9d % 7d % 6d % 7d %s %s %s\n" % (
                 i, r.start(i), r.length(i), r.base(i), r.linkrev(i),
             short(node), short(pp[0]), short(pp[1])))
 
 def debugindexdot(ui, file_):
     """dump an index DAG as a graphviz dot file"""
     r = revlog.revlog(util.opener(os.getcwd(), audit=False), file_)
     ui.write("digraph G {\n")
     for i in r:
         node = r.node(i)
         pp = r.parents(node)
         ui.write("\t%d -> %d\n" % (r.rev(pp[0]), i))
         if pp[1] != nullid:
             ui.write("\t%d -> %d\n" % (r.rev(pp[1]), i))
     ui.write("}\n")
 
 def debuginstall(ui):
     '''test Mercurial installation'''
 
     def writetemp(contents):
         (fd, name) = tempfile.mkstemp(prefix="hg-debuginstall-")
         f = os.fdopen(fd, "wb")
         f.write(contents)
         f.close()
         return name
 
     problems = 0
 
     # encoding
     ui.status(_("Checking encoding (%s)...\n") % encoding.encoding)
     try:
         encoding.fromlocal("test")
     except util.Abort, inst:
         ui.write(" %s\n" % inst)
         ui.write(_(" (check that your locale is properly set)\n"))
         problems += 1
 
     # compiled modules
     ui.status(_("Checking extensions...\n"))
     try:
         import bdiff, mpatch, base85
     except Exception, inst:
         ui.write(" %s\n" % inst)
         ui.write(_(" One or more extensions could not be found"))
         ui.write(_(" (check that you compiled the extensions)\n"))
         problems += 1
 
     # templates
     ui.status(_("Checking templates...\n"))
     try:
         import templater
         templater.templater(templater.templatepath("map-cmdline.default"))
     except Exception, inst:
         ui.write(" %s\n" % inst)
         ui.write(_(" (templates seem to have been installed incorrectly)\n"))
         problems += 1
 
     # patch
     ui.status(_("Checking patch...\n"))
     patchproblems = 0
     a = "1\n2\n3\n4\n"
     b = "1\n2\n3\ninsert\n4\n"
     fa = writetemp(a)
     d = mdiff.unidiff(a, None, b, None, os.path.basename(fa),
         os.path.basename(fa))
     fd = writetemp(d)
 
     files = {}
     try:
         patch.patch(fd, ui, cwd=os.path.dirname(fa), files=files)
     except util.Abort, e:
         ui.write(_(" patch call failed:\n"))
         ui.write(" " + str(e) + "\n")
         patchproblems += 1
     else:
         if list(files) != [os.path.basename(fa)]:
             ui.write(_(" unexpected patch output!\n"))
             patchproblems += 1
         a = file(fa).read()
         if a != b:
             ui.write(_(" patch test failed!\n"))
             patchproblems += 1
 
     if patchproblems:
         if ui.config('ui', 'patch'):
             ui.write(_(" (Current patch tool may be incompatible with patch,"
                        " or misconfigured. Please check your .hgrc file)\n"))
         else:
             ui.write(_(" Internal patcher failure, please report this error"
                        " to http://www.selenic.com/mercurial/bts\n"))
     problems += patchproblems
 
     os.unlink(fa)
     os.unlink(fd)
 
     # editor
     ui.status(_("Checking commit editor...\n"))
     editor = ui.geteditor()
     cmdpath = util.find_exe(editor) or util.find_exe(editor.split()[0])
     if not cmdpath:
         if editor == 'vi':
             ui.write(_(" No commit editor set and can't find vi in PATH\n"))
             ui.write(_(" (specify a commit editor in your .hgrc file)\n"))
         else:
             ui.write(_(" Can't find editor '%s' in PATH\n") % editor)
             ui.write(_(" (specify a commit editor in your .hgrc file)\n"))
             problems += 1
 
     # check username
     ui.status(_("Checking username...\n"))
     user = os.environ.get("HGUSER")
     if user is None:
         user = ui.config("ui", "username")
     if user is None:
         user = os.environ.get("EMAIL")
     if not user:
         ui.warn(" ")
         ui.username()
         ui.write(_(" (specify a username in your .hgrc file)\n"))
 
     if not problems:
         ui.status(_("No problems detected\n"))
     else:
         ui.write(_("%s problems detected,"
                    " please check your install!\n") % problems)
 
     return problems
 
 def debugrename(ui, repo, file1, *pats, **opts):
     """dump rename information"""
 
     ctx = repo[opts.get('rev')]
     m = cmdutil.match(repo, (file1,) + pats, opts)
     for abs in ctx.walk(m):
         fctx = ctx[abs]
         o = fctx.filelog().renamed(fctx.filenode())
         rel = m.rel(abs)
         if o:
             ui.write(_("%s renamed from %s:%s\n") % (rel, o[0], hex(o[1])))
         else:
             ui.write(_("%s not renamed\n") % rel)
 
 def debugwalk(ui, repo, *pats, **opts):
     """show how files match on given patterns"""
     m = cmdutil.match(repo, pats, opts)
     items = list(repo.walk(m))
     if not items:
         return
     fmt = 'f  %%-%ds  %%-%ds  %%s' % (
         max([len(abs) for abs in items]),
         max([len(m.rel(abs)) for abs in items]))
     for abs in items:
         line = fmt % (abs, m.rel(abs), m.exact(abs) and 'exact' or '')
         ui.write("%s\n" % line.rstrip())
 
 def diff(ui, repo, *pats, **opts):
     """diff repository (or selected files)
 
     Show differences between revisions for the specified files.
 
     Differences between files are shown using the unified diff format.
 
     NOTE: diff may generate unexpected results for merges, as it will
     default to comparing against the working directory's first parent
     changeset if no revisions are specified.
 
     When two revision arguments are given, then changes are shown
     between those revisions. If only one revision is specified then
     that revision is compared to the working directory, and, when no
     revisions are specified, the working directory files are compared
     to its parent.
 
     Without the -a/--text option, diff will avoid generating diffs of
     files it detects as binary. With -a, diff will generate a diff
     anyway, probably with undesirable results.
 
     Use the -g/--git option to generate diffs in the git extended diff
     format. For more information, read 'hg help diffs'.
     """
 
     revs = opts.get('rev')
     change = opts.get('change')
 
     if revs and change:
         msg = _('cannot specify --rev and --change at the same time')
         raise util.Abort(msg)
     elif change:
         node2 = repo.lookup(change)
         node1 = repo[node2].parents()[0].node()
     else:
         node1, node2 = cmdutil.revpair(repo, revs)
 
     m = cmdutil.match(repo, pats, opts)
     it = patch.diff(repo, node1, node2, match=m, opts=patch.diffopts(ui, opts))
     for chunk in it:
         ui.write(chunk)
 
 def export(ui, repo, *changesets, **opts):
     """dump the header and diffs for one or more changesets
 
     Print the changeset header and diffs for one or more revisions.
 
     The information shown in the changeset header is: author,
     changeset hash, parent(s) and commit comment.
 
     NOTE: export may generate unexpected diff output for merge
     changesets, as it will compare the merge changeset against its
     first parent only.
 
     Output may be to a file, in which case the name of the file is
     given using a format string. The formatting rules are as follows:
 
     %%   literal "%" character
     %H   changeset hash (40 bytes of hexadecimal)
     %N   number of patches being generated
     %R   changeset revision number
     %b   basename of the exporting repository
     %h   short-form changeset hash (12 bytes of hexadecimal)
     %n   zero-padded sequence number, starting at 1
     %r   zero-padded changeset revision number
 
     Without the -a/--text option, export will avoid generating diffs
     of files it detects as binary. With -a, export will generate a
     diff anyway, probably with undesirable results.
 
     Use the -g/--git option to generate diffs in the git extended diff
     format. See 'hg help diffs' for more information.
 
     With the --switch-parent option, the diff will be against the
     second parent. It can be useful to review a merge.
     """
     if not changesets:
         raise util.Abort(_("export requires at least one changeset"))
     revs = cmdutil.revrange(repo, changesets)
     if len(revs) > 1:
         ui.note(_('exporting patches:\n'))
     else:
         ui.note(_('exporting patch:\n'))
     patch.export(repo, revs, template=opts.get('output'),
                  switch_parent=opts.get('switch_parent'),
                  opts=patch.diffopts(ui, opts))
 
 def grep(ui, repo, pattern, *pats, **opts):
     """search for a pattern in specified files and revisions
 
     Search revisions of files for a regular expression.
 
     This command behaves differently than Unix grep. It only accepts
     Python/Perl regexps. It searches repository history, not the
     working directory. It always prints the revision number in which a
     match appears.
 
     By default, grep only prints output for the first revision of a
     file in which it finds a match. To get it to print every revision
     that contains a change in match status ("-" for a match that
     becomes a non-match, or "+" for a non-match that becomes a match),
     use the --all flag.
     """
     reflags = 0
     if opts.get('ignore_case'):
         reflags |= re.I
     try:
         regexp = re.compile(pattern, reflags)
     except Exception, inst:
         ui.warn(_("grep: invalid match pattern: %s\n") % inst)
         return None
     sep, eol = ':', '\n'
     if opts.get('print0'):
         sep = eol = '\0'
 
     fcache = {}
     forder = []
     def getfile(fn):
         if fn not in fcache:
             if len(fcache) > 20:
                 del fcache[forder.pop(0)]
             fcache[fn] = repo.file(fn)
         else:
             forder.remove(fn)
 
         forder.append(fn)
         return fcache[fn]
 
     def matchlines(body):
         begin = 0
         linenum = 0
         while True:
             match = regexp.search(body, begin)
             if not match:
                 break
             mstart, mend = match.span()
             linenum += body.count('\n', begin, mstart) + 1
             lstart = body.rfind('\n', begin, mstart) + 1 or begin
             begin = body.find('\n', mend) + 1 or len(body)
             lend = begin - 1
             yield linenum, mstart - lstart, mend - lstart, body[lstart:lend]
 
     class linestate(object):
         def __init__(self, line, linenum, colstart, colend):
             self.line = line
             self.linenum = linenum
             self.colstart = colstart
             self.colend = colend
 
         def __hash__(self):
             return hash((self.linenum, self.line))
 
         def __eq__(self, other):
             return self.line == other.line
 
     matches = {}
     copies = {}
     def grepbody(fn, rev, body):
         matches[rev].setdefault(fn, [])
         m = matches[rev][fn]
         for lnum, cstart, cend, line in matchlines(body):
             s = linestate(line, lnum, cstart, cend)
             m.append(s)
 
     def difflinestates(a, b):
         sm = difflib.SequenceMatcher(None, a, b)
         for tag, alo, ahi, blo, bhi in sm.get_opcodes():
             if tag == 'insert':
                 for i in xrange(blo, bhi):
                     yield ('+', b[i])
             elif tag == 'delete':
                 for i in xrange(alo, ahi):
                     yield ('-', a[i])
             elif tag == 'replace':
                 for i in xrange(alo, ahi):
                     yield ('-', a[i])
                 for i in xrange(blo, bhi):
                     yield ('+', b[i])
 
     prev = {}
     def display(fn, rev, states, prevstates):
         datefunc = ui.quiet and util.shortdate or util.datestr
         found = False
         filerevmatches = {}
         r = prev.get(fn, -1)
         if opts.get('all'):
             iter = difflinestates(states, prevstates)
         else:
             iter = [('', l) for l in prevstates]
         for change, l in iter:
             cols = [fn, str(r)]
             if opts.get('line_number'):
                 cols.append(str(l.linenum))
             if opts.get('all'):
                 cols.append(change)
             if opts.get('user'):
                 cols.append(ui.shortuser(get(r)[1]))
             if opts.get('date'):
                 cols.append(datefunc(get(r)[2]))
             if opts.get('files_with_matches'):
                 c = (fn, r)
                 if c in filerevmatches:
                     continue
                 filerevmatches[c] = 1
             else:
                 cols.append(l.line)
             ui.write(sep.join(cols), eol)
             found = True
         return found
 
     fstate = {}
     skip = {}
     get = util.cachefunc(lambda r: repo[r].changeset())
     changeiter, matchfn = cmdutil.walkchangerevs(ui, repo, pats, get, opts)
     found = False
     follow = opts.get('follow')
     for st, rev, fns in changeiter:
         if st == 'window':
             matches.clear()
         elif st == 'add':
             ctx = repo[rev]
             matches[rev] = {}
             for fn in fns:
                 if fn in skip:
                     continue
                 try:
                     grepbody(fn, rev, getfile(fn).read(ctx.filenode(fn)))
                     fstate.setdefault(fn, [])
                     if follow:
                         copied = getfile(fn).renamed(ctx.filenode(fn))
                         if copied:
                             copies.setdefault(rev, {})[fn] = copied[0]
                 except error.LookupError:
                     pass
         elif st == 'iter':
             for fn, m in sorted(matches[rev].items()):
                 copy = copies.get(rev, {}).get(fn)
                 if fn in skip:
                     if copy:
                         skip[copy] = True
                     continue
                 if fn in prev or fstate[fn]:
                     r = display(fn, rev, m, fstate[fn])
                     found = found or r
                     if r and not opts.get('all'):
                         skip[fn] = True
                         if copy:
                             skip[copy] = True
                 fstate[fn] = m
                 if copy:
                     fstate[copy] = m
                 prev[fn] = rev
 
     for fn, state in sorted(fstate.items()):
         if fn in skip:
             continue
         if fn not in copies.get(prev[fn], {}):
             found = display(fn, rev, {}, state) or found
     return (not found and 1) or 0
 
 def heads(ui, repo, *branchrevs, **opts):
     """show current repository heads or show branch heads
 
     With no arguments, show all repository head changesets.
 
     Repository "heads" are changesets that don't have child
     changesets. They are where development generally takes place and
     are the usual targets for update and merge operations.
 
     If one or more REV is given, the "branch heads" will be shown for
     the named branch associated with that revision. The name of the
     branch is called the revision's branch tag.
 
     Branch heads are revisions on a given named branch that do not have
     any children on the same branch. A branch head could be a true head
     or it could be the last changeset on a branch before a new branch
     was created. If none of the branch heads are true heads, the branch
     is considered inactive.
 
     If STARTREV is specified only those heads (or branch heads) that
     are descendants of STARTREV will be displayed.
     """
     if opts.get('rev'):
         start = repo.lookup(opts['rev'])
     else:
         start = None
     closed = opts.get('closed')
     hideinactive, _heads = opts.get('active'), None
     if not branchrevs:
         # Assume we're looking repo-wide heads if no revs were specified.
         heads = repo.heads(start)
     else:
         if hideinactive:
             _heads = repo.heads(start)
         heads = []
         visitedset = set()
         for branchrev in branchrevs:
             branch = repo[branchrev].branch()
             if branch in visitedset:
                 continue
             visitedset.add(branch)
             bheads = repo.branchheads(branch, start, closed=closed)
             if not bheads:
                 if not opts.get('rev'):
                     ui.warn(_("no open branch heads on branch %s\n") % branch)
                 elif branch != branchrev:
                     ui.warn(_("no changes on branch %s containing %s are "
                               "reachable from %s\n")
                             % (branch, branchrev, opts.get('rev')))
                 else:
                     ui.warn(_("no changes on branch %s are reachable from %s\n")
                             % (branch, opts.get('rev')))
             if hideinactive:
                 bheads = [bhead for bhead in bheads if bhead in _heads]
             heads.extend(bheads)
     if not heads:
         return 1
     displayer = cmdutil.show_changeset(ui, repo, opts)
     for n in heads:
         displayer.show(repo[n])
 
 def help_(ui, name=None, with_version=False):
     """show help for a given topic or a help overview
 
     With no arguments, print a list of commands with short help messages.
 
     Given a topic, extension, or command name, print help for that
     topic."""
     option_lists = []
 
     def addglobalopts(aliases):
         if ui.verbose:
             option_lists.append((_("global options:"), globalopts))
             if name == 'shortlist':
                 option_lists.append((_('use "hg help" for the full list '
                                        'of commands'), ()))
         else:
             if name == 'shortlist':
                 msg = _('use "hg help" for the full list of commands '
                         'or "hg -v" for details')
             elif aliases:
                 msg = _('use "hg -v help%s" to show aliases and '
                         'global options') % (name and " " + name or "")
             else:
                 msg = _('use "hg -v help %s" to show global options') % name
             option_lists.append((msg, ()))
 
     def helpcmd(name):
         if with_version:
             version_(ui)
             ui.write('\n')
 
         try:
             aliases, i = cmdutil.findcmd(name, table, False)
         except error.AmbiguousCommand, inst:
             select = lambda c: c.lstrip('^').startswith(inst.args[0])
             helplist(_('list of commands:\n\n'), select)
             return
 
         # synopsis
         if len(i) > 2:
             if i[2].startswith('hg'):
                 ui.write("%s\n" % i[2])
             else:
                 ui.write('hg %s %s\n' % (aliases[0], i[2]))
         else:
             ui.write('hg %s\n' % aliases[0])
 
         # aliases
         if not ui.quiet and len(aliases) > 1:
             ui.write(_("\naliases: %s\n") % ', '.join(aliases[1:]))
 
         # description
         doc = gettext(i[0].__doc__)
         if not doc:
             doc = _("(no help text available)")
         if ui.quiet:
             doc = doc.splitlines(0)[0]
         ui.write("\n%s\n" % doc.rstrip())
 
         if not ui.quiet:
             # options
             if i[1]:
                 option_lists.append((_("options:\n"), i[1]))
 
             addglobalopts(False)
 
     def helplist(header, select=None):
         h = {}
         cmds = {}
         for c, e in table.iteritems():
             f = c.split("|", 1)[0]
             if select and not select(f):
                 continue
             if (not select and name != 'shortlist' and
                 e[0].__module__ != __name__):
                 continue
             if name == "shortlist" and not f.startswith("^"):
                 continue
             f = f.lstrip("^")
             if not ui.debugflag and f.startswith("debug"):
                 continue
             doc = gettext(e[0].__doc__)
             if not doc:
                 doc = _("(no help text available)")
             h[f] = doc.splitlines(0)[0].rstrip()
             cmds[f] = c.lstrip("^")
 
         if not h:
             ui.status(_('no commands defined\n'))
             return
 
         ui.status(header)
         fns = sorted(h)
         m = max(map(len, fns))
         for f in fns:
             if ui.verbose:
                 commands = cmds[f].replace("|",", ")
                 ui.write(" %s:\n      %s\n"%(commands, h[f]))
             else:
                 ui.write(' %-*s   %s\n' % (m, f, h[f]))
 
         exts = list(extensions.extensions())
         if exts and name != 'shortlist':
             ui.write(_('\nenabled extensions:\n\n'))
             maxlength = 0
             exthelps = []
             for ename, ext in exts:
                 doc = (gettext(ext.__doc__) or _('(no help text available)'))
                 ename = ename.split('.')[-1]
                 maxlength = max(len(ename), maxlength)
                 exthelps.append((ename, doc.splitlines(0)[0].strip()))
             for ename, text in exthelps:
                 ui.write(_(' %s   %s\n') % (ename.ljust(maxlength), text))
 
         if not ui.quiet:
             addglobalopts(True)
 
     def helptopic(name):
         for names, header, doc in help.helptable:
             if name in names:
                 break
         else:
             raise error.UnknownCommand(name)
 
         # description
         if not doc:
             doc = _("(no help text available)")
         if hasattr(doc, '__call__'):
             doc = doc()
 
         ui.write("%s\n" % header)
         ui.write("%s\n" % doc.rstrip())
 
     def helpext(name):
         try:
             mod = extensions.find(name)
         except KeyError:
             raise error.UnknownCommand(name)
 
         doc = gettext(mod.__doc__) or _('no help text available')
         doc = doc.splitlines(0)
         ui.write(_('%s extension - %s\n') % (name.split('.')[-1], doc[0]))
         for d in doc[1:]:
             ui.write(d, '\n')
 
         ui.status('\n')
 
         try:
             ct = mod.cmdtable
         except AttributeError:
             ct = {}
 
         modcmds = set([c.split('|', 1)[0] for c in ct])
         helplist(_('list of commands:\n\n'), modcmds.__contains__)
 
     if name and name != 'shortlist':
         i = None
         for f in (helptopic, helpcmd, helpext):
             try:
                 f(name)
                 i = None
                 break
             except error.UnknownCommand, inst:
                 i = inst
         if i:
             raise i
 
     else:
         # program name
         if ui.verbose or with_version:
             version_(ui)
         else:
             ui.status(_("Mercurial Distributed SCM\n"))
         ui.status('\n')
 
         # list of commands
         if name == "shortlist":
             header = _('basic commands:\n\n')
         else:
             header = _('list of commands:\n\n')
 
         helplist(header)
 
     # list all option lists
     opt_output = []
     for title, options in option_lists:
         opt_output.append(("\n%s" % title, None))
         for shortopt, longopt, default, desc in options:
             if "DEPRECATED" in desc and not ui.verbose: continue
             opt_output.append(("%2s%s" % (shortopt and "-%s" % shortopt,
                                           longopt and " --%s" % longopt),
                                "%s%s" % (desc,
                                          default
                                          and _(" (default: %s)") % default
                                          or "")))
 
     if not name:
         ui.write(_("\nadditional help topics:\n\n"))
         topics = []
         for names, header, doc in help.helptable:
             names = [(-len(name), name) for name in names]
             names.sort()
             topics.append((names[0][1], header))
         topics_len = max([len(s[0]) for s in topics])
         for t, desc in topics:
             ui.write(" %-*s  %s\n" % (topics_len, t, desc))
 
     if opt_output:
         opts_len = max([len(line[0]) for line in opt_output if line[1]] or [0])
         for first, second in opt_output:
             if second:
                 # wrap descriptions at 70 characters, just like the
                 # main help texts
                 second = textwrap.wrap(second, width=70 - opts_len - 3)
                 pad = '\n' + ' ' * (opts_len + 3)
                 ui.write(" %-*s  %s\n" % (opts_len, first, pad.join(second)))
             else:
                 ui.write("%s\n" % first)
 
 def identify(ui, repo, source=None,
              rev=None, num=None, id=None, branch=None, tags=None):
     """identify the working copy or specified revision
 
     With no revision, print a summary of the current state of the
     repository.
 
     Specifying a path to a repository root or Mercurial bundle will
     cause lookup to operate on that repository/bundle.
 
     This summary identifies the repository state using one or two
     parent hash identifiers, followed by a "+" if there are
     uncommitted changes in the working directory, a list of tags for
     this revision and a branch name for non-default branches.
     """
 
     if not repo and not source:
         raise util.Abort(_("There is no Mercurial repository here "
                            "(.hg not found)"))
 
     hexfunc = ui.debugflag and hex or short
     default = not (num or id or branch or tags)
     output = []
 
     revs = []
     if source:
         source, revs, checkout = hg.parseurl(ui.expandpath(source), [])
         repo = hg.repository(ui, source)
 
     if not repo.local():
         if not rev and revs:
             rev = revs[0]
         if not rev:
             rev = "tip"
         if num or branch or tags:
             raise util.Abort(
                 "can't query remote revision number, branch, or tags")
         output = [hexfunc(repo.lookup(rev))]
     elif not rev:
         ctx = repo[None]
         parents = ctx.parents()
         changed = False
         if default or id or num:
             changed = ctx.files() + ctx.deleted()
         if default or id:
             output = ["%s%s" % ('+'.join([hexfunc(p.node()) for p in parents]),
                                 (changed) and "+" or "")]
         if num:
             output.append("%s%s" % ('+'.join([str(p.rev()) for p in parents]),
                                     (changed) and "+" or ""))
     else:
         ctx = repo[rev]
         if default or id:
             output = [hexfunc(ctx.node())]
         if num:
             output.append(str(ctx.rev()))
 
     if repo.local() and default and not ui.quiet:
         b = encoding.tolocal(ctx.branch())
         if b != 'default':
             output.append("(%s)" % b)
 
         # multiple tags for a single parent separated by '/'
         t = "/".join(ctx.tags())
         if t:
             output.append(t)
 
     if branch:
         output.append(encoding.tolocal(ctx.branch()))
 
     if tags:
         output.extend(ctx.tags())
 
     ui.write("%s\n" % ' '.join(output))
 
 def import_(ui, repo, patch1, *patches, **opts):
     """import an ordered set of patches
 
     Import a list of patches and commit them individually.
 
     If there are outstanding changes in the working directory, import
     will abort unless given the -f/--force flag.
 
     You can import a patch straight from a mail message. Even patches
     as attachments work (to use the body part, it must have type
     text/plain or text/x-patch). From and Subject headers of email
     message are used as default committer and commit message. All
     text/plain body parts before first diff are added to commit
     message.
 
     If the imported patch was generated by hg export, user and
     description from patch override values from message headers and
     body. Values given on command line with -m/--message and -u/--user
     override these.
 
     If --exact is specified, import will set the working directory to
     the parent of each patch before applying it, and will abort if the
     resulting changeset has a different ID than the one recorded in
     the patch. This may happen due to character set problems or other
     deficiencies in the text patch format.
 
     With -s/--similarity, hg will attempt to discover renames and
     copies in the patch in the same way as 'addremove'.
 
     To read a patch from standard input, use "-" as the patch name.
     See 'hg help dates' for a list of formats valid for -d/--date.
     """
     patches = (patch1,) + patches
 
     date = opts.get('date')
     if date:
         opts['date'] = util.parsedate(date)
 
     try:
         sim = float(opts.get('similarity') or 0)
     except ValueError:
         raise util.Abort(_('similarity must be a number'))
     if sim < 0 or sim > 100:
         raise util.Abort(_('similarity must be between 0 and 100'))
 
     if opts.get('exact') or not opts.get('force'):
         cmdutil.bail_if_changed(repo)
 
     d = opts["base"]
     strip = opts["strip"]
     wlock = lock = None
     try:
         wlock = repo.wlock()
         lock = repo.lock()
         for p in patches:
             pf = os.path.join(d, p)
 
             if pf == '-':
                 ui.status(_("applying patch from stdin\n"))
                 pf = sys.stdin
             else:
                 ui.status(_("applying %s\n") % p)
                 pf = url.open(ui, pf)
             data = patch.extract(ui, pf)
             tmpname, message, user, date, branch, nodeid, p1, p2 = data
 
             if tmpname is None:
                 raise util.Abort(_('no diffs found'))
 
             try:
                 cmdline_message = cmdutil.logmessage(opts)
                 if cmdline_message:
                     # pickup the cmdline msg
                     message = cmdline_message
                 elif message:
                     # pickup the patch msg
                     message = message.strip()
                 else:
                     # launch the editor
                     message = None
                 ui.debug(_('message:\n%s\n') % message)
 
                 wp = repo.parents()
                 if opts.get('exact'):
                     if not nodeid or not p1:
                         raise util.Abort(_('not a Mercurial patch'))
                     p1 = repo.lookup(p1)
                     p2 = repo.lookup(p2 or hex(nullid))
 
                     if p1 != wp[0].node():
                         hg.clean(repo, p1)
                     repo.dirstate.setparents(p1, p2)
                 elif p2:
                     try:
                         p1 = repo.lookup(p1)
                         p2 = repo.lookup(p2)
                         if p1 == wp[0].node():
                             repo.dirstate.setparents(p1, p2)
                     except error.RepoError:
                         pass
                 if opts.get('exact') or opts.get('import_branch'):
                     repo.dirstate.setbranch(branch or 'default')
 
                 files = {}
                 try:
                     patch.patch(tmpname, ui, strip=strip, cwd=repo.root,
                                 files=files, eolmode=None)
                 finally:
                     files = patch.updatedir(ui, repo, files, similarity=sim/100.)
                 if not opts.get('no_commit'):
                     m = cmdutil.matchfiles(repo, files or [])
                     n = repo.commit(message, opts.get('user') or user,
                                     opts.get('date') or date, match=m,
                                     editor=cmdutil.commiteditor)
                     if opts.get('exact'):
                         if hex(n) != nodeid:
                             repo.rollback()
                             raise util.Abort(_('patch is damaged'
                                                ' or loses information'))
                     # Force a dirstate write so that the next transaction
                     # backups an up-do-date file.
                     repo.dirstate.write()
             finally:
                 os.unlink(tmpname)
     finally:
         release(lock, wlock)
 
 def incoming(ui, repo, source="default", **opts):
     """show new changesets found in source
 
     Show new changesets found in the specified path/URL or the default
     pull location. These are the changesets that would have been pulled
     if a pull at the time you issued this command.
 
     For remote repository, using --bundle avoids downloading the
     changesets twice if the incoming is followed by a pull.
 
     See pull for valid source format details.
     """
     limit = cmdutil.loglimit(opts)
     source, revs, checkout = hg.parseurl(ui.expandpath(source), opts.get('rev'))
     other = hg.repository(cmdutil.remoteui(repo, opts), source)
     ui.status(_('comparing with %s\n') % url.hidepassword(source))
     if revs:
         revs = [other.lookup(rev) for rev in revs]
     common, incoming, rheads = repo.findcommonincoming(other, heads=revs,
                                                        force=opts["force"])
     if not incoming:
         try:
             os.unlink(opts["bundle"])
         except:
             pass
         ui.status(_("no changes found\n"))
         return 1
 
     cleanup = None
     try:
         fname = opts["bundle"]
         if fname or not other.local():
             # create a bundle (uncompressed if other repo is not local)
 
             if revs is None and other.capable('changegroupsubset'):
                 revs = rheads
 
             if revs is None:
                 cg = other.changegroup(incoming, "incoming")
             else:
                 cg = other.changegroupsubset(incoming, revs, 'incoming')
             bundletype = other.local() and "HG10BZ" or "HG10UN"
             fname = cleanup = changegroup.writebundle(cg, fname, bundletype)
             # keep written bundle?
             if opts["bundle"]:
                 cleanup = None
             if not other.local():
                 # use the created uncompressed bundlerepo
                 other = bundlerepo.bundlerepository(ui, repo.root, fname)
 
         o = other.changelog.nodesbetween(incoming, revs)[0]
         if opts.get('newest_first'):
             o.reverse()
         displayer = cmdutil.show_changeset(ui, other, opts)
         count = 0
         for n in o:
             if count >= limit:
                 break
             parents = [p for p in other.changelog.parents(n) if p != nullid]
             if opts.get('no_merges') and len(parents) == 2:
                 continue
             count += 1
             displayer.show(other[n])
     finally:
         if hasattr(other, 'close'):
             other.close()
         if cleanup:
             os.unlink(cleanup)
 
 def init(ui, dest=".", **opts):
     """create a new repository in the given directory
 
     Initialize a new repository in the given directory. If the given
     directory does not exist, it will be created.
 
     If no directory is given, the current directory is used.
 
     It is possible to specify an ssh:// URL as the destination.
     See 'hg help urls' for more information.
     """
     hg.repository(cmdutil.remoteui(ui, opts), dest, create=1)
 
 def locate(ui, repo, *pats, **opts):
     """locate files matching specific patterns
 
     Print files under Mercurial control in the working directory whose
     names match the given patterns.
 
     By default, this command searches all directories in the working
     directory. To search just the current directory and its
     subdirectories, use "--include .".
 
     If no patterns are given to match, this command prints the names
     of all files under Mercurial control in the working directory.
 
     If you want to feed the output of this command into the "xargs"
     command, use the -0 option to both this command and "xargs". This
     will avoid the problem of "xargs" treating single filenames that
     contain whitespace as multiple filenames.
     """
     end = opts.get('print0') and '\0' or '\n'
     rev = opts.get('rev') or None
 
     ret = 1
     m = cmdutil.match(repo, pats, opts, default='relglob')
     m.bad = lambda x,y: False
     for abs in repo[rev].walk(m):
         if not rev and abs not in repo.dirstate:
             continue
         if opts.get('fullpath'):
             ui.write(repo.wjoin(abs), end)
         else:
             ui.write(((pats and m.rel(abs)) or abs), end)
         ret = 0
 
     return ret
 
 def log(ui, repo, *pats, **opts):
     """show revision history of entire repository or files
 
     Print the revision history of the specified files or the entire
     project.
 
     File history is shown without following rename or copy history of
     files. Use -f/--follow with a filename to follow history across
     renames and copies. --follow without a filename will only show
     ancestors or descendants of the starting revision. --follow-first
     only follows the first parent of merge revisions.
 
     If no revision range is specified, the default is tip:0 unless
     --follow is set, in which case the working directory parent is
     used as the starting revision.
 
     See 'hg help dates' for a list of formats valid for -d/--date.
 
     By default this command prints revision number and changeset id,
     tags, non-trivial parents, user, date and time, and a summary for
     each commit. When the -v/--verbose switch is used, the list of
     changed files and full commit message are shown.
 
     NOTE: log -p/--patch may generate unexpected diff output for merge
     changesets, as it will only compare the merge changeset against
     its first parent. Also, only files different from BOTH parents
     will appear in files:.
     """
 
     get = util.cachefunc(lambda r: repo[r].changeset())
     changeiter, matchfn = cmdutil.walkchangerevs(ui, repo, pats, get, opts)
 
     limit = cmdutil.loglimit(opts)
     count = 0
 
     if opts.get('copies') and opts.get('rev'):
         endrev = max(cmdutil.revrange(repo, opts.get('rev'))) + 1
     else:
         endrev = len(repo)
     rcache = {}
     ncache = {}
     def getrenamed(fn, rev):
         '''looks up all renames for a file (up to endrev) the first
         time the file is given. It indexes on the changerev and only
         parses the manifest if linkrev != changerev.
         Returns rename info for fn at changerev rev.'''
         if fn not in rcache:
             rcache[fn] = {}
             ncache[fn] = {}
             fl = repo.file(fn)
             for i in fl:
                 node = fl.node(i)
                 lr = fl.linkrev(i)
                 renamed = fl.renamed(node)
                 rcache[fn][lr] = renamed
                 if renamed:
                     ncache[fn][node] = renamed
                 if lr >= endrev:
                     break
         if rev in rcache[fn]:
             return rcache[fn][rev]
 
         # If linkrev != rev (i.e. rev not found in rcache) fallback to
         # filectx logic.
 
         try:
             return repo[rev][fn].renamed()
         except error.LookupError:
             pass
         return None
 
     df = False
     if opts["date"]:
         df = util.matchdate(opts["date"])
 
     only_branches = opts.get('only_branch')
 
     displayer = cmdutil.show_changeset(ui, repo, opts, True, matchfn)
     for st, rev, fns in changeiter:
         if st == 'add':
             parents = [p for p in repo.changelog.parentrevs(rev)
                        if p != nullrev]
             if opts.get('no_merges') and len(parents) == 2:
                 continue
             if opts.get('only_merges') and len(parents) != 2:
                 continue
 
             if only_branches:
                 revbranch = get(rev)[5]['branch']
                 if revbranch not in only_branches:
                     continue
 
             if df:
                 changes = get(rev)
                 if not df(changes[2][0]):
                     continue
 
             if opts.get('keyword'):
                 changes = get(rev)
                 miss = 0
                 for k in [kw.lower() for kw in opts['keyword']]:
                     if not (k in changes[1].lower() or
                             k in changes[4].lower() or
                             k in " ".join(changes[3]).lower()):
                         miss = 1
                         break
                 if miss:
                     continue
 
             if opts['user']:
                 changes = get(rev)
                 if not [k for k in opts['user'] if k in changes[1]]:
                     continue
 
             copies = []
             if opts.get('copies') and rev:
                 for fn in get(rev)[3]:
                     rename = getrenamed(fn, rev)
                     if rename:
                         copies.append((fn, rename[0]))
             displayer.show(context.changectx(repo, rev), copies=copies)
         elif st == 'iter':
             if count == limit: break
             if displayer.flush(rev):
                 count += 1
 
 def manifest(ui, repo, node=None, rev=None):
     """output the current or given revision of the project manifest
 
     Print a list of version controlled files for the given revision.
     If no revision is given, the first parent of the working directory
     is used, or the null revision if no revision is checked out.
 
     With -v, print file permissions, symlink and executable bits.
     With --debug, print file revision hashes.
     """
 
     if rev and node:
         raise util.Abort(_("please specify just one revision"))
 
     if not node:
         node = rev
 
     decor = {'l':'644 @ ', 'x':'755 * ', '':'644   '}
     ctx = repo[node]
     for f in ctx:
         if ui.debugflag:
             ui.write("%40s " % hex(ctx.manifest()[f]))
         if ui.verbose:
             ui.write(decor[ctx.flags(f)])
         ui.write("%s\n" % f)
 
 def merge(ui, repo, node=None, **opts):
     """merge working directory with another revision
 
     The current working directory is updated with all changes made in
     the requested revision since the last common predecessor revision.
 
     Files that changed between either parent are marked as changed for
     the next commit and a commit must be performed before any further
     updates to the repository are allowed. The next commit will have
     two parents.
 
     If no revision is specified, the working directory's parent is a
     head revision, and the current branch contains exactly one other
     head, the other head is merged with by default. Otherwise, an
     explicit revision with which to merge with must be provided.
     """
 
     if opts.get('rev') and node:
         raise util.Abort(_("please specify just one revision"))
     if not node:
         node = opts.get('rev')
 
     if not node:
         branch = repo.changectx(None).branch()
         bheads = repo.branchheads(branch)
         if len(bheads) > 2:
             raise util.Abort(_("branch '%s' has %d heads - "
                                "please merge with an explicit rev") %
                              (branch, len(bheads)))
 
         parent = repo.dirstate.parents()[0]
         if len(bheads) == 1:
             if len(repo.heads()) > 1:
                 raise util.Abort(_("branch '%s' has one head - "
                                    "please merge with an explicit rev") %
                                  branch)
             msg = _('there is nothing to merge')
             if parent != repo.lookup(repo[None].branch()):
                 msg = _('%s - use "hg update" instead') % msg
             raise util.Abort(msg)
 
         if parent not in bheads:
             raise util.Abort(_('working dir not at a head rev - '
                                'use "hg update" or merge with an explicit rev'))
         node = parent == bheads[0] and bheads[-1] or bheads[0]
 
     if opts.get('show'):
         p1 = repo['.']
         p2 = repo[node]
         common = p1.ancestor(p2)
         roots, heads = [common.node()], [p2.node()]
         displayer = cmdutil.show_changeset(ui, repo, opts)
         for node in repo.changelog.nodesbetween(roots=roots, heads=heads)[0]:
             displayer.show(repo[node])
         return 0
 
     return hg.merge(repo, node, force=opts.get('force'))
 
 def outgoing(ui, repo, dest=None, **opts):
     """show changesets not found in destination
 
     Show changesets not found in the specified destination repository
     or the default push location. These are the changesets that would
     be pushed if a push was requested.
 
     See pull for valid destination format details.
     """
     limit = cmdutil.loglimit(opts)
     dest, revs, checkout = hg.parseurl(
         ui.expandpath(dest or 'default-push', dest or 'default'), opts.get('rev'))
     if revs:
         revs = [repo.lookup(rev) for rev in revs]
 
     other = hg.repository(cmdutil.remoteui(repo, opts), dest)
     ui.status(_('comparing with %s\n') % url.hidepassword(dest))
     o = repo.findoutgoing(other, force=opts.get('force'))
     if not o:
         ui.status(_("no changes found\n"))
         return 1
     o = repo.changelog.nodesbetween(o, revs)[0]
     if opts.get('newest_first'):
         o.reverse()
     displayer = cmdutil.show_changeset(ui, repo, opts)
     count = 0
     for n in o:
         if count >= limit:
             break
         parents = [p for p in repo.changelog.parents(n) if p != nullid]
         if opts.get('no_merges') and len(parents) == 2:
             continue
         count += 1
         displayer.show(repo[n])
 
 def parents(ui, repo, file_=None, **opts):
     """show the parents of the working directory or revision
 
     Print the working directory's parent revisions. If a revision is
     given via -r/--rev, the parent of that revision will be printed.
     If a file argument is given, the revision in which the file was
     last changed (before the working directory revision or the
     argument to --rev if given) is printed.
     """
     rev = opts.get('rev')
     if rev:
         ctx = repo[rev]
     else:
         ctx = repo[None]
 
     if file_:
         m = cmdutil.match(repo, (file_,), opts)
         if m.anypats() or len(m.files()) != 1:
             raise util.Abort(_('can only specify an explicit filename'))
         file_ = m.files()[0]
         filenodes = []
         for cp in ctx.parents():
             if not cp:
                 continue
             try:
                 filenodes.append(cp.filenode(file_))
             except error.LookupError:
                 pass
         if not filenodes:
             raise util.Abort(_("'%s' not found in manifest!") % file_)
         fl = repo.file(file_)
         p = [repo.lookup(fl.linkrev(fl.rev(fn))) for fn in filenodes]
     else:
         p = [cp.node() for cp in ctx.parents()]
 
     displayer = cmdutil.show_changeset(ui, repo, opts)
     for n in p:
         if n != nullid:
             displayer.show(repo[n])
 
 def paths(ui, repo, search=None):
     """show aliases for remote repositories
 
     Show definition of symbolic path name NAME. If no name is given,
     show definition of all available names.
 
     Path names are defined in the [paths] section of /etc/mercurial/hgrc
     and $HOME/.hgrc. If run inside a repository, .hg/hgrc is used, too.
 
     See 'hg help urls' for more information.
     """
     if search:
         for name, path in ui.configitems("paths"):
             if name == search:
                 ui.write("%s\n" % url.hidepassword(path))
                 return
         ui.warn(_("not found!\n"))
         return 1
     else:
         for name, path in ui.configitems("paths"):
             ui.write("%s = %s\n" % (name, url.hidepassword(path)))
 
 def postincoming(ui, repo, modheads, optupdate, checkout):
     if modheads == 0:
         return
     if optupdate:
         if (modheads <= 1 or len(repo.branchheads()) == 1) or checkout:
             return hg.update(repo, checkout)
         else:
             ui.status(_("not updating, since new heads added\n"))
     if modheads > 1:
         ui.status(_("(run 'hg heads' to see heads, 'hg merge' to merge)\n"))
     else:
         ui.status(_("(run 'hg update' to get a working copy)\n"))
 
 def pull(ui, repo, source="default", **opts):
     """pull changes from the specified source
 
     Pull changes from a remote repository to a local one.
 
     This finds all changes from the repository at the specified path
     or URL and adds them to a local repository (the current one unless
     -R is specified). By default, this does not update the copy of the
     project in the working directory.
 
     Use hg incoming if you want to see what would have been added by a
     pull at the time you issued this command. If you then decide to
     added those changes to the repository, you should use pull -r X
     where X is the last changeset listed by hg incoming.
 
     If SOURCE is omitted, the 'default' path will be used.
     See 'hg help urls' for more information.
     """
     source, revs, checkout = hg.parseurl(ui.expandpath(source), opts.get('rev'))
     other = hg.repository(cmdutil.remoteui(repo, opts), source)
     ui.status(_('pulling from %s\n') % url.hidepassword(source))
     if revs:
         try:
             revs = [other.lookup(rev) for rev in revs]
         except error.CapabilityError:
             err = _("Other repository doesn't support revision lookup, "
                     "so a rev cannot be specified.")
             raise util.Abort(err)
 
     modheads = repo.pull(other, heads=revs, force=opts.get('force'))
     return postincoming(ui, repo, modheads, opts.get('update'), checkout)
 
 def push(ui, repo, dest=None, **opts):
     """push changes to the specified destination
 
     Push changes from the local repository to the given destination.
 
     This is the symmetrical operation for pull. It moves changes from
     the current repository to a different one. If the destination is
     local this is identical to a pull in that directory from the
     current one.
 
     By default, push will refuse to run if it detects the result would
     increase the number of remote heads. This generally indicates the
     user forgot to pull and merge before pushing.
 
     If -r/--rev is used, the named revision and all its ancestors will
     be pushed to the remote repository.
 
     Please see 'hg help urls' for important details about ssh://
     URLs. If DESTINATION is omitted, a default path will be used.
     See 'hg help urls' for more information.
     """
     dest, revs, checkout = hg.parseurl(
         ui.expandpath(dest or 'default-push', dest or 'default'), opts.get('rev'))
     other = hg.repository(cmdutil.remoteui(repo, opts), dest)
     ui.status(_('pushing to %s\n') % url.hidepassword(dest))
     if revs:
         revs = [repo.lookup(rev) for rev in revs]
     r = repo.push(other, opts.get('force'), revs=revs)
     return r == 0
 
 def recover(ui, repo):
     """roll back an interrupted transaction
 
     Recover from an interrupted commit or pull.
 
     This command tries to fix the repository status after an
     interrupted operation. It should only be necessary when Mercurial
     suggests it.
     """
     if repo.recover():
         return hg.verify(repo)
     return 1
 
 def remove(ui, repo, *pats, **opts):
     """remove the specified files on the next commit
 
     Schedule the indicated files for removal from the repository.
 
     This only removes files from the current branch, not from the
     entire project history. -A/--after can be used to remove only
     files that have already been deleted, -f/--force can be used to
     force deletion, and -Af can be used to remove files from the next
     revision without deleting them from the working directory.
 
     The following table details the behavior of remove for different
     file states (columns) and option combinations (rows). The file
     states are Added [A], Clean [C], Modified [M] and Missing [!]
     (as reported by hg status). The actions are Warn, Remove (from
     branch) and Delete (from disk).
 
            A  C  M  !
     none   W  RD W  R
     -f     R  RD RD R
     -A     W  W  W  R
     -Af    R  R  R  R
 
     This command schedules the files to be removed at the next commit.
     To undo a remove before that, see hg revert.
     """
 
     after, force = opts.get('after'), opts.get('force')
     if not pats and not after:
         raise util.Abort(_('no files specified'))
 
     m = cmdutil.match(repo, pats, opts)
     s = repo.status(match=m, clean=True)
     modified, added, deleted, clean = s[0], s[1], s[3], s[6]
 
     for f in m.files():
         if f not in repo.dirstate and not os.path.isdir(m.rel(f)):
             ui.warn(_('not removing %s: file is untracked\n') % m.rel(f))
 
     def warn(files, reason):
         for f in files:
             ui.warn(_('not removing %s: file %s (use -f to force removal)\n')
                     % (m.rel(f), reason))
 
     if force:
         remove, forget = modified + deleted + clean, added
     elif after:
         remove, forget = deleted, []
         warn(modified + added + clean, _('still exists'))
     else:
         remove, forget = deleted + clean, []
         warn(modified, _('is modified'))
         warn(added, _('has been marked for add'))
 
     for f in sorted(remove + forget):
         if ui.verbose or not m.exact(f):
             ui.status(_('removing %s\n') % m.rel(f))
 
     repo.forget(forget)
     repo.remove(remove, unlink=not after)
 
 def rename(ui, repo, *pats, **opts):
     """rename files; equivalent of copy + remove
 
     Mark dest as copies of sources; mark sources for deletion. If dest
     is a directory, copies are put in that directory. If dest is a
     file, there can only be one source.
 
     By default, this command copies the contents of files as they
     exist in the working directory. If invoked with -A/--after, the
     operation is recorded, but no copying is performed.
 
     This command takes effect at the next commit. To undo a rename
     before that, see hg revert.
     """
     wlock = repo.wlock(False)
     try:
         return cmdutil.copy(ui, repo, pats, opts, rename=True)
     finally:
         wlock.release()
 
 def resolve(ui, repo, *pats, **opts):
     """retry file merges from a merge or update
 
     This command will cleanly retry unresolved file merges using file
     revisions preserved from the last update or merge. To attempt to
     resolve all unresolved files, use the -a/--all switch.
 
     If a conflict is resolved manually, please note that the changes
     will be overwritten if the merge is retried with resolve. The
     -m/--mark switch should be used to mark the file as resolved.
 
     This command also allows listing resolved files and manually
     indicating whether or not files are resolved. All files must be
     marked as resolved before a commit is permitted.
 
     The codes used to show the status of files are:
     U = unresolved
     R = resolved
     """
 
     all, mark, unmark, show = [opts.get(o) for o in 'all mark unmark list'.split()]
 
     if (show and (mark or unmark)) or (mark and unmark):
         raise util.Abort(_("too many options specified"))
     if pats and all:
         raise util.Abort(_("can't specify --all and patterns"))
     if not (all or pats or show or mark or unmark):
         raise util.Abort(_('no files or directories specified; '
                            'use --all to remerge all files'))
 
     ms = merge_.mergestate(repo)
     m = cmdutil.match(repo, pats, opts)
 
     for f in ms:
         if m(f):
             if show:
                 ui.write("%s %s\n" % (ms[f].upper(), f))
             elif mark:
                 ms.mark(f, "r")
             elif unmark:
                 ms.mark(f, "u")
             else:
                 wctx = repo[None]
                 mctx = wctx.parents()[-1]
 
                 # backup pre-resolve (merge uses .orig for its own purposes)
                 a = repo.wjoin(f)
                 util.copyfile(a, a + ".resolve")
 
                 # resolve file
                 ms.resolve(f, wctx, mctx)
 
                 # replace filemerge's .orig file with our resolve file
                 util.rename(a + ".resolve", a + ".orig")
 
 def revert(ui, repo, *pats, **opts):
     """restore individual files or directories to an earlier state
 
     (Use update -r to check out earlier revisions, revert does not
     change the working directory parents.)
 
     With no revision specified, revert the named files or directories
     to the contents they had in the parent of the working directory.
     This restores the contents of the affected files to an unmodified
     state and unschedules adds, removes, copies, and renames. If the
     working directory has two parents, you must explicitly specify the
     revision to revert to.
 
     Using the -r/--rev option, revert the given files or directories
     to their contents as of a specific revision. This can be helpful
     to "roll back" some or all of an earlier change. See 'hg help
     dates' for a list of formats valid for -d/--date.
 
     Revert modifies the working directory. It does not commit any
     changes, or change the parent of the working directory. If you
     revert to a revision other than the parent of the working
     directory, the reverted files will thus appear modified
     afterwards.
 
     If a file has been deleted, it is restored. If the executable mode
     of a file was changed, it is reset.
 
     If names are given, all files matching the names are reverted.
     If no arguments are given, no files are reverted.
 
     Modified files are saved with a .orig suffix before reverting.
     To disable these backups, use --no-backup.
     """
 
     if opts["date"]:
         if opts["rev"]:
             raise util.Abort(_("you can't specify a revision and a date"))
         opts["rev"] = cmdutil.finddate(ui, repo, opts["date"])
 
     if not pats and not opts.get('all'):
         raise util.Abort(_('no files or directories specified; '
                            'use --all to revert the whole repo'))
 
     parent, p2 = repo.dirstate.parents()
     if not opts.get('rev') and p2 != nullid:
         raise util.Abort(_('uncommitted merge - please provide a '
                            'specific revision'))
     ctx = repo[opts.get('rev')]
     node = ctx.node()
     mf = ctx.manifest()
     if node == parent:
         pmf = mf
     else:
         pmf = None
 
     # need all matching names in dirstate and manifest of target rev,
     # so have to walk both. do not print errors if files exist in one
     # but not other.
 
     names = {}
 
     wlock = repo.wlock()
     try:
         # walk dirstate.
 
         m = cmdutil.match(repo, pats, opts)
         m.bad = lambda x,y: False
         for abs in repo.walk(m):
             names[abs] = m.rel(abs), m.exact(abs)
 
         # walk target manifest.
 
         def badfn(path, msg):
             if path in names:
                 return
             path_ = path + '/'
             for f in names:
                 if f.startswith(path_):
                     return
             ui.warn("%s: %s\n" % (m.rel(path), msg))
 
         m = cmdutil.match(repo, pats, opts)
         m.bad = badfn
         for abs in repo[node].walk(m):
             if abs not in names:
                 names[abs] = m.rel(abs), m.exact(abs)
 
         m = cmdutil.matchfiles(repo, names)
         changes = repo.status(match=m)[:4]
         modified, added, removed, deleted = map(set, changes)
 
         # if f is a rename, also revert the source
         cwd = repo.getcwd()
         for f in added:
             src = repo.dirstate.copied(f)
             if src and src not in names and repo.dirstate[src] == 'r':
                 removed.add(src)
                 names[src] = (repo.pathto(src, cwd), True)
 
         def removeforget(abs):
             if repo.dirstate[abs] == 'a':
                 return _('forgetting %s\n')
             return _('removing %s\n')
 
         revert = ([], _('reverting %s\n'))
         add = ([], _('adding %s\n'))
         remove = ([], removeforget)
         undelete = ([], _('undeleting %s\n'))
 
         disptable = (
             # dispatch table:
             #   file state
             #   action if in target manifest
             #   action if not in target manifest
             #   make backup if in target manifest
             #   make backup if not in target manifest
             (modified, revert, remove, True, True),
             (added, revert, remove, True, False),
             (removed, undelete, None, False, False),
             (deleted, revert, remove, False, False),
             )
 
         for abs, (rel, exact) in sorted(names.items()):
             mfentry = mf.get(abs)
             target = repo.wjoin(abs)
             def handle(xlist, dobackup):
                 xlist[0].append(abs)
                 if dobackup and not opts.get('no_backup') and util.lexists(target):
                     bakname = "%s.orig" % rel
                     ui.note(_('saving current version of %s as %s\n') %
                             (rel, bakname))
                     if not opts.get('dry_run'):
                         util.copyfile(target, bakname)
                 if ui.verbose or not exact:
                     msg = xlist[1]
                     if not isinstance(msg, basestring):
                         msg = msg(abs)
                     ui.status(msg % rel)
             for table, hitlist, misslist, backuphit, backupmiss in disptable:
                 if abs not in table: continue
                 # file has changed in dirstate
                 if mfentry:
                     handle(hitlist, backuphit)
                 elif misslist is not None:
                     handle(misslist, backupmiss)
                 break
             else:
                 if abs not in repo.dirstate:
                     if mfentry:
                         handle(add, True)
                     elif exact:
                         ui.warn(_('file not managed: %s\n') % rel)
                     continue
                 # file has not changed in dirstate
                 if node == parent:
                     if exact: ui.warn(_('no changes needed to %s\n') % rel)
                     continue
                 if pmf is None:
                     # only need parent manifest in this unlikely case,
                     # so do not read by default
                     pmf = repo[parent].manifest()
                 if abs in pmf:
                     if mfentry:
                         # if version of file is same in parent and target
                         # manifests, do nothing
                         if (pmf[abs] != mfentry or
                             pmf.flags(abs) != mf.flags(abs)):
                             handle(revert, False)
                     else:
                         handle(remove, False)
 
         if not opts.get('dry_run'):
             def checkout(f):
                 fc = ctx[f]
                 repo.wwrite(f, fc.data(), fc.flags())
 
             audit_path = util.path_auditor(repo.root)
             for f in remove[0]:
                 if repo.dirstate[f] == 'a':
                     repo.dirstate.forget(f)
                     continue
                 audit_path(f)
                 try:
                     util.unlink(repo.wjoin(f))
                 except OSError:
                     pass
                 repo.dirstate.remove(f)
 
             normal = None
             if node == parent:
                 # We're reverting to our parent. If possible, we'd like status
                 # to report the file as clean. We have to use normallookup for
                 # merges to avoid losing information about merged/dirty files.
                 if p2 != nullid:
                     normal = repo.dirstate.normallookup
                 else:
                     normal = repo.dirstate.normal
             for f in revert[0]:
                 checkout(f)
                 if normal:
                     normal(f)
 
             for f in add[0]:
                 checkout(f)
                 repo.dirstate.add(f)
 
             normal = repo.dirstate.normallookup
             if node == parent and p2 == nullid:
                 normal = repo.dirstate.normal
             for f in undelete[0]:
                 checkout(f)
                 normal(f)
 
     finally:
         wlock.release()
 
 def rollback(ui, repo):
     """roll back the last transaction
 
     This command should be used with care. There is only one level of
     rollback, and there is no way to undo a rollback. It will also
     restore the dirstate at the time of the last transaction, losing
     any dirstate changes since that time.
 
     Transactions are used to encapsulate the effects of all commands
     that create new changesets or propagate existing changesets into a
     repository. For example, the following commands are transactional,
     and their effects can be rolled back:
 
       commit
       import
       pull
       push (with this repository as destination)
       unbundle
 
     This command is not intended for use on public repositories. Once
     changes are visible for pull by other users, rolling a transaction
     back locally is ineffective (someone else may already have pulled
     the changes). Furthermore, a race is possible with readers of the
     repository; for example an in-progress pull from the repository
     may fail if a rollback is performed.
     """
     repo.rollback()
 
 def root(ui, repo):
     """print the root (top) of the current working directory
 
     Print the root directory of the current repository.
     """
     ui.write(repo.root + "\n")
 
 def serve(ui, repo, **opts):
     """export the repository via HTTP
 
     Start a local HTTP repository browser and pull server.
 
     By default, the server logs accesses to stdout and errors to
     stderr. Use the -A/--accesslog and -E/--errorlog options to log to
     files.
     """
 
     if opts["stdio"]:
         if repo is None:
             raise error.RepoError(_("There is no Mercurial repository here"
                               " (.hg not found)"))
         s = sshserver.sshserver(ui, repo)
         s.serve_forever()
 
     baseui = repo and repo.baseui or ui
     optlist = ("name templates style address port prefix ipv6"
                " accesslog errorlog webdir_conf certificate")
     for o in optlist.split():
         if opts[o]:
             baseui.setconfig("web", o, str(opts[o]))
             if (repo is not None) and (repo.ui != baseui):
                 repo.ui.setconfig("web", o, str(opts[o]))
 
     if repo is None and not ui.config("web", "webdir_conf"):
         raise error.RepoError(_("There is no Mercurial repository here"
                                 " (.hg not found)"))
 
     class service(object):
         def init(self):
             util.set_signal_handler()
             self.httpd = server.create_server(baseui, repo)
 
             if not ui.verbose: return
 
             if self.httpd.prefix:
                 prefix = self.httpd.prefix.strip('/') + '/'
             else:
                 prefix = ''
 
             port = ':%d' % self.httpd.port
             if port == ':80':
                 port = ''
 
             bindaddr = self.httpd.addr
             if bindaddr == '0.0.0.0':
                 bindaddr = '*'
             elif ':' in bindaddr: # IPv6
                 bindaddr = '[%s]' % bindaddr
 
             fqaddr = self.httpd.fqaddr
             if ':' in fqaddr:
                 fqaddr = '[%s]' % fqaddr
             ui.status(_('listening at http://%s%s/%s (bound to %s:%d)\n') %
                       (fqaddr, port, prefix, bindaddr, self.httpd.port))
 
         def run(self):
             self.httpd.serve_forever()
 
     service = service()
 
     cmdutil.service(opts, initfn=service.init, runfn=service.run)
 
 def status(ui, repo, *pats, **opts):
     """show changed files in the working directory
 
     Show status of files in the repository. If names are given, only
     files that match are shown. Files that are clean or ignored or
     the source of a copy/move operation, are not listed unless
     -c/--clean, -i/--ignored, -C/--copies or -A/--all are given.
     Unless options described with "show only ..." are given, the
     options -mardu are used.
 
     Option -q/--quiet hides untracked (unknown and ignored) files
     unless explicitly requested with -u/--unknown or -i/--ignored.
 
     NOTE: status may appear to disagree with diff if permissions have
     changed or a merge has occurred. The standard diff format does not
     report permission changes and diff only reports changes relative
     to one merge parent.
 
     If one revision is given, it is used as the base revision.
     If two revisions are given, the differences between them are
     shown.
 
     The codes used to show the status of files are:
     M = modified
     A = added
     R = removed
     C = clean
     ! = missing (deleted by non-hg command, but still tracked)
     ? = not tracked
     I = ignored
       = origin of the previous file listed as A (added)
     """
 
     node1, node2 = cmdutil.revpair(repo, opts.get('rev'))
     cwd = (pats and repo.getcwd()) or ''
     end = opts.get('print0') and '\0' or '\n'
     copy = {}
     states = 'modified added removed deleted unknown ignored clean'.split()
     show = [k for k in states if opts.get(k)]
     if opts.get('all'):
         show += ui.quiet and (states[:4] + ['clean']) or states
     if not show:
         show = ui.quiet and states[:4] or states[:5]
 
     stat = repo.status(node1, node2, cmdutil.match(repo, pats, opts),
                        'ignored' in show, 'clean' in show, 'unknown' in show)
     changestates = zip(states, 'MAR!?IC', stat)
 
     if (opts.get('all') or opts.get('copies')) and not opts.get('no_status'):
         ctxn = repo[nullid]
         ctx1 = repo[node1]
         ctx2 = repo[node2]
         added = stat[1]
         if node2 is None:
             added = stat[0] + stat[1] # merged?
 
         for k, v in copies.copies(repo, ctx1, ctx2, ctxn)[0].iteritems():
             if k in added:
                 copy[k] = v
             elif v in added:
                 copy[v] = k
 
     for state, char, files in changestates:
         if state in show:
             format = "%s %%s%s" % (char, end)
             if opts.get('no_status'):
                 format = "%%s%s" % end
 
             for f in files:
                 ui.write(format % repo.pathto(f, cwd))
                 if f in copy:
                     ui.write('  %s%s' % (repo.pathto(copy[f], cwd), end))
 
 def tag(ui, repo, name1, *names, **opts):
     """add one or more tags for the current or given revision
 
     Name a particular revision using <name>.
 
     Tags are used to name particular revisions of the repository and are
     very useful to compare different revisions, to go back to significant
     earlier versions or to mark branch points as releases, etc.
 
     If no revision is given, the parent of the working directory is
     used, or tip if no revision is checked out.
 
     To facilitate version control, distribution, and merging of tags,
     they are stored as a file named ".hgtags" which is managed
     similarly to other project files and can be hand-edited if
     necessary. The file '.hg/localtags' is used for local tags (not
     shared among repositories).
 
     See 'hg help dates' for a list of formats valid for -d/--date.
     """
 
     rev_ = "."
     names = (name1,) + names
     if len(names) != len(set(names)):
         raise util.Abort(_('tag names must be unique'))
     for n in names:
         if n in ['tip', '.', 'null']:
             raise util.Abort(_('the name \'%s\' is reserved') % n)
     if opts.get('rev') and opts.get('remove'):
         raise util.Abort(_("--rev and --remove are incompatible"))
     if opts.get('rev'):
         rev_ = opts['rev']
     message = opts.get('message')
     if opts.get('remove'):
         expectedtype = opts.get('local') and 'local' or 'global'
         for n in names:
             if not repo.tagtype(n):
                 raise util.Abort(_('tag \'%s\' does not exist') % n)
             if repo.tagtype(n) != expectedtype:
                 if expectedtype == 'global':
                     raise util.Abort(_('tag \'%s\' is not a global tag') % n)
                 else:
                     raise util.Abort(_('tag \'%s\' is not a local tag') % n)
         rev_ = nullid
         if not message:
             message = _('Removed tag %s') % ', '.join(names)
     elif not opts.get('force'):
         for n in names:
             if n in repo.tags():
                 raise util.Abort(_('tag \'%s\' already exists '
                                    '(use -f to force)') % n)
     if not rev_ and repo.dirstate.parents()[1] != nullid:
         raise util.Abort(_('uncommitted merge - please provide a '
                            'specific revision'))
     r = repo[rev_].node()
 
     if not message:
         message = (_('Added tag %s for changeset %s') %
                    (', '.join(names), short(r)))
 
     date = opts.get('date')
     if date:
         date = util.parsedate(date)
 
     repo.tag(names, r, message, opts.get('local'), opts.get('user'), date)
 
 def tags(ui, repo):
     """list repository tags
 
     This lists both regular and local tags. When the -v/--verbose
     switch is used, a third column "local" is printed for local tags.
     """
 
     hexfunc = ui.debugflag and hex or short
     tagtype = ""
 
     for t, n in reversed(repo.tagslist()):
         if ui.quiet:
             ui.write("%s\n" % t)
             continue
 
         try:
             hn = hexfunc(n)
             r = "%5d:%s" % (repo.changelog.rev(n), hn)
         except error.LookupError:
             r = "    ?:%s" % hn
         else:
             spaces = " " * (30 - encoding.colwidth(t))
             if ui.verbose:
                 if repo.tagtype(t) == 'local':
                     tagtype = " local"
                 else:
                     tagtype = ""
             ui.write("%s%s %s%s\n" % (t, spaces, r, tagtype))
 
 def tip(ui, repo, **opts):
     """show the tip revision
 
     The tip revision (usually just called the tip) is the changeset
     most recently added to the repository (and therefore the most
     recently changed head).
 
     If you have just made a commit, that commit will be the tip. If
     you have just pulled changes from another repository, the tip of
     that repository becomes the current tip. The "tip" tag is special
     and cannot be renamed or assigned to a different changeset.
     """
     cmdutil.show_changeset(ui, repo, opts).show(repo[len(repo) - 1])
 
 def unbundle(ui, repo, fname1, *fnames, **opts):
     """apply one or more changegroup files
 
     Apply one or more compressed changegroup files generated by the
     bundle command.
     """
     fnames = (fname1,) + fnames
 
     lock = repo.lock()
     try:
         for fname in fnames:
             f = url.open(ui, fname)
             gen = changegroup.readbundle(f, fname)
             modheads = repo.addchangegroup(gen, 'unbundle', 'bundle:' + fname)
     finally:
         lock.release()
 
     return postincoming(ui, repo, modheads, opts.get('update'), None)
 
 def update(ui, repo, node=None, rev=None, clean=False, date=None):
     """update working directory
 
     Update the repository's working directory to the specified
     revision, or the tip of the current branch if none is specified.
     Use null as the revision to remove the working copy (like 'hg
     clone -U').
 
     When the working directory contains no uncommitted changes, it
     will be replaced by the state of the requested revision from the
     repository. When the requested revision is on a different branch,
     the working directory will additionally be switched to that
     branch.
 
     When there are uncommitted changes, use option -C/--clean to
     discard them, forcibly replacing the state of the working
     directory with the requested revision.
 
     When there are uncommitted changes and option -C/--clean is not
     used, and the parent revision and requested revision are on the
     same branch, and one of them is an ancestor of the other, then the
     new working directory will contain the requested revision merged
     with the uncommitted changes. Otherwise, the update will fail with
     a suggestion to use 'merge' or 'update -C' instead.
 
     If you want to update just one file to an older revision, use
     revert.
 
     See 'hg help dates' for a list of formats valid for -d/--date.
     """
     if rev and node:
         raise util.Abort(_("please specify just one revision"))
 
     if not rev:
         rev = node
 
     if date:
         if rev:
             raise util.Abort(_("you can't specify a revision and a date"))
         rev = cmdutil.finddate(ui, repo, date)
 
     if clean:
         return hg.clean(repo, rev)
     else:
         return hg.update(repo, rev)
 
 def verify(ui, repo):
     """verify the integrity of the repository
 
     Verify the integrity of the current repository.
 
     This will perform an extensive check of the repository's
     integrity, validating the hashes and checksums of each entry in
     the changelog, manifest, and tracked files, as well as the
     integrity of their crosslinks and indices.
     """
     return hg.verify(repo)
 
 def version_(ui):
     """output version and copyright information"""
     ui.write(_("Mercurial Distributed SCM (version %s)\n")
              % util.version())
     ui.status(_(
         "\nCopyright (C) 2005-2009 Matt Mackall <[e-mail]> and others\n"
         "This is free software; see the source for copying conditions. "
         "There is NO\nwarranty; "
         "not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
     ))
 
 # Command options and aliases are listed here, alphabetically
 
 globalopts = [
     ('R', 'repository', '',
      _('repository root directory or symbolic path name')),
     ('', 'cwd', '', _('change working directory')),
     ('y', 'noninteractive', None,
      _('do not prompt, assume \'yes\' for any required answers')),
     ('q', 'quiet', None, _('suppress output')),
     ('v', 'verbose', None, _('enable additional output')),
     ('', 'config', [], _('set/override config option')),
     ('', 'debug', None, _('enable debugging output')),
     ('', 'debugger', None, _('start debugger')),
     ('', 'encoding', encoding.encoding, _('set the charset encoding')),
     ('', 'encodingmode', encoding.encodingmode,
      _('set the charset encoding mode')),
     ('', 'traceback', None, _('print traceback on exception')),
     ('', 'time', None, _('time how long the command takes')),
     ('', 'profile', None, _('print command execution profile')),
     ('', 'version', None, _('output version information and exit')),
     ('h', 'help', None, _('display help and exit')),
 ]
 
 dryrunopts = [('n', 'dry-run', None,
                _('do not perform actions, just print output'))]
 
 remoteopts = [
     ('e', 'ssh', '', _('specify ssh command to use')),
     ('', 'remotecmd', '', _('specify hg command to run on the remote side')),
 ]
 
 walkopts = [
     ('I', 'include', [], _('include names matching the given patterns')),
     ('X', 'exclude', [], _('exclude names matching the given patterns')),
 ]
 
 commitopts = [
     ('m', 'message', '', _('use <text> as commit message')),
     ('l', 'logfile', '', _('read commit message from <file>')),
 ]
 
 commitopts2 = [
     ('d', 'date', '', _('record datecode as commit date')),
     ('u', 'user', '', _('record the specified user as committer')),
 ]
 
 templateopts = [
     ('', 'style', '', _('display using template map file')),
     ('', 'template', '', _('display with template')),
 ]
 
 logopts = [
     ('p', 'patch', None, _('show patch')),
     ('g', 'git', None, _('use git extended diff format')),
     ('l', 'limit', '', _('limit number of changes displayed')),
     ('M', 'no-merges', None, _('do not show merges')),
 ] + templateopts
 
 diffopts = [
     ('a', 'text', None, _('treat all files as text')),
     ('g', 'git', None, _('use git extended diff format')),
     ('', 'nodates', None, _("don't include dates in diff headers"))
 ]
 
 diffopts2 = [
     ('p', 'show-function', None, _('show which function each change is in')),
     ('w', 'ignore-all-space', None,
      _('ignore white space when comparing lines')),
     ('b', 'ignore-space-change', None,
      _('ignore changes in the amount of white space')),
     ('B', 'ignore-blank-lines', None,
      _('ignore changes whose lines are all blank')),
     ('U', 'unified', '', _('number of lines of context to show'))
 ]
 
 similarityopts = [
     ('s', 'similarity', '',
            _('guess renamed files by similarity (0<=s<=100)'))
 ]
 
 table = {
     "^add": (add, walkopts + dryrunopts, _('[OPTION]... [FILE]...')),
     "addremove":
         (addremove, similarityopts + walkopts + dryrunopts,
          _('[OPTION]... [FILE]...')),
     "^annotate|blame":
         (annotate,
          [('r', 'rev', '', _('annotate the specified revision')),
           ('f', 'follow', None, _('follow file copies and renames')),
           ('a', 'text', None, _('treat all files as text')),
           ('u', 'user', None, _('list the author (long with -v)')),
           ('d', 'date', None, _('list the date (short with -q)')),
           ('n', 'number', None, _('list the revision number (default)')),
           ('c', 'changeset', None, _('list the changeset')),
           ('l', 'line-number', None,
            _('show line number at the first appearance'))
          ] + walkopts,
          _('[-r REV] [-f] [-a] [-u] [-d] [-n] [-c] [-l] FILE...')),
     "archive":
         (archive,
          [('', 'no-decode', None, _('do not pass files through decoders')),
           ('p', 'prefix', '', _('directory prefix for files in archive')),
           ('r', 'rev', '', _('revision to distribute')),
           ('t', 'type', '', _('type of distribution to create')),
          ] + walkopts,
          _('[OPTION]... DEST')),
     "backout":
         (backout,
          [('', 'merge', None,
            _('merge with old dirstate parent after backout')),
           ('', 'parent', '', _('parent to choose when backing out merge')),
           ('r', 'rev', '', _('revision to backout')),
          ] + walkopts + commitopts + commitopts2,
          _('[OPTION]... [-r] REV')),
     "bisect":
         (bisect,
          [('r', 'reset', False, _('reset bisect state')),
           ('g', 'good', False, _('mark changeset good')),
           ('b', 'bad', False, _('mark changeset bad')),
           ('s', 'skip', False, _('skip testing changeset')),
           ('c', 'command', '', _('use command to check changeset state')),
           ('U', 'noupdate', False, _('do not update to target'))],
          _("[-gbsr] [-c CMD] [REV]")),
     "branch":
         (branch,
          [('f', 'force', None,
            _('set branch name even if it shadows an existing branch')),
           ('C', 'clean', None, _('reset branch name to parent branch name'))],
          _('[-fC] [NAME]')),
     "branches":
         (branches,
          [('a', 'active', False,
            _('show only branches that have unmerged heads'))],
          _('[-a]')),
     "bundle":
         (bundle,
          [('f', 'force', None,
            _('run even when remote repository is unrelated')),
           ('r', 'rev', [],
            _('a changeset up to which you would like to bundle')),
           ('', 'base', [],
            _('a base changeset to specify instead of a destination')),
           ('a', 'all', None, _('bundle all changesets in the repository')),
           ('t', 'type', 'bzip2', _('bundle compression type to use')),
          ] + remoteopts,
          _('[-f] [-a] [-r REV]... [--base REV]... FILE [DEST]')),
     "cat":
         (cat,
          [('o', 'output', '', _('print output to file with formatted name')),
           ('r', 'rev', '', _('print the given revision')),
           ('', 'decode', None, _('apply any matching decode filter')),
          ] + walkopts,
          _('[OPTION]... FILE...')),
     "^clone":
         (clone,
          [('U', 'noupdate', None,
           _('the clone will only contain a repository (no working copy)')),
           ('r', 'rev', [],
            _('a changeset you would like to have after cloning')),
           ('', 'pull', None, _('use pull protocol to copy metadata')),
           ('', 'uncompressed', None,
            _('use uncompressed transfer (fast over LAN)')),
          ] + remoteopts,
          _('[OPTION]... SOURCE [DEST]')),
     "^commit|ci":
         (commit,
          [('A', 'addremove', None,
            _('mark new/missing files as added/removed before committing')),
           ('', 'close-branch', None,
            _('mark a branch as closed, hiding it from the branch list')),
          ] + walkopts + commitopts + commitopts2,
          _('[OPTION]... [FILE]...')),
     "copy|cp":
         (copy,
          [('A', 'after', None, _('record a copy that has already occurred')),
           ('f', 'force', None,
            _('forcibly copy over an existing managed file')),
          ] + walkopts + dryrunopts,
          _('[OPTION]... [SOURCE]... DEST')),
     "debugancestor": (debugancestor, [], _('[INDEX] REV1 REV2')),
     "debugcheckstate": (debugcheckstate, []),
     "debugcommands": (debugcommands, [], _('[COMMAND]')),
     "debugcomplete":
         (debugcomplete,
          [('o', 'options', None, _('show the command options'))],
          _('[-o] CMD')),
     "debugdate":
         (debugdate,
          [('e', 'extended', None, _('try extended date formats'))],
          _('[-e] DATE [RANGE]')),
     "debugdata": (debugdata, [], _('FILE REV')),
     "debugfsinfo": (debugfsinfo, [], _('[PATH]')),
     "debugindex": (debugindex, [], _('FILE')),
     "debugindexdot": (debugindexdot, [], _('FILE')),
     "debuginstall": (debuginstall, []),
     "debugrebuildstate":
         (debugrebuildstate,
          [('r', 'rev', '', _('revision to rebuild to'))],
          _('[-r REV] [REV]')),
     "debugrename":
         (debugrename,
          [('r', 'rev', '', _('revision to debug'))],
          _('[-r REV] FILE')),
     "debugsetparents":
         (debugsetparents, [], _('REV1 [REV2]')),
     "debugstate":
         (debugstate,
          [('', 'nodates', None, _('do not display the saved mtime'))],
          _('[OPTION]...')),
+    "debugsub":
+        (debugsub,
+         [('r', 'rev', '', _('revision to check'))],
+         _('[-r REV] [REV]')),
     "debugwalk": (debugwalk, walkopts, _('[OPTION]... [FILE]...')),
     "^diff":
         (diff,
          [('r', 'rev', [], _('revision')),
           ('c', 'change', '', _('change made by revision'))
          ] + diffopts + diffopts2 + walkopts,
          _('[OPTION]... [-r REV1 [-r REV2]] [FILE]...')),
     "^export":
         (export,
          [('o', 'output', '', _('print output to file with formatted name')),
           ('', 'switch-parent', None, _('diff against the second parent'))
           ] + diffopts,
          _('[OPTION]... [-o OUTFILESPEC] REV...')),
     "grep":
         (grep,
          [('0', 'print0', None, _('end fields with NUL')),
           ('', 'all', None, _('print all revisions that match')),
           ('f', 'follow', None,
            _('follow changeset history, or file history across copies and renames')),
           ('i', 'ignore-case', None, _('ignore case when matching')),
           ('l', 'files-with-matches', None,
            _('print only filenames and revisions that match')),
           ('n', 'line-number', None, _('print matching line numbers')),
           ('r', 'rev', [], _('search in given revision range')),
           ('u', 'user', None, _('list the author (long with -v)')),
           ('d', 'date', None, _('list the date (short with -q)')),
          ] + walkopts,
          _('[OPTION]... PATTERN [FILE]...')),
     "heads":
         (heads,
          [('r', 'rev', '', _('show only heads which are descendants of REV')),
           ('a', 'active', False,
            _('show only the active heads from open branches')),
           ('c', 'closed', False,
            _('show normal and closed heads')),
          ] + templateopts,
          _('[-r STARTREV] [REV]...')),
     "help": (help_, [], _('[TOPIC]')),
     "identify|id":
         (identify,
          [('r', 'rev', '', _('identify the specified revision')),
           ('n', 'num', None, _('show local revision number')),
           ('i', 'id', None, _('show global revision id')),
           ('b', 'branch', None, _('show branch')),
           ('t', 'tags', None, _('show tags'))],
          _('[-nibt] [-r REV] [SOURCE]')),
     "import|patch":
         (import_,
          [('p', 'strip', 1,
            _('directory strip option for patch. This has the same '
              'meaning as the corresponding patch option')),
           ('b', 'base', '', _('base path')),
           ('f', 'force', None,
            _('skip check for outstanding uncommitted changes')),
           ('', 'no-commit', None, _("don't commit, just update the working directory")),
           ('', 'exact', None,
            _('apply patch to the nodes from which it was generated')),
           ('', 'import-branch', None,
            _('use any branch information in patch (implied by --exact)'))] +
          commitopts + commitopts2 + similarityopts,
          _('[OPTION]... PATCH...')),
     "incoming|in":
         (incoming,
          [('f', 'force', None,
            _('run even when remote repository is unrelated')),
           ('n', 'newest-first', None, _('show newest record first')),
           ('', 'bundle', '', _('file to store the bundles into')),
           ('r', 'rev', [],
            _('a specific revision up to which you would like to pull')),
          ] + logopts + remoteopts,
          _('[-p] [-n] [-M] [-f] [-r REV]...'
            ' [--bundle FILENAME] [SOURCE]')),
     "^init":
         (init,
          remoteopts,
          _('[-e CMD] [--remotecmd CMD] [DEST]')),
     "locate":
         (locate,
          [('r', 'rev', '', _('search the repository as it stood at REV')),
           ('0', 'print0', None,
            _('end filenames with NUL, for use with xargs')),
           ('f', 'fullpath', None,
            _('print complete paths from the filesystem root')),
          ] + walkopts,
          _('[OPTION]... [PATTERN]...')),
     "^log|history":
         (log,
          [('f', 'follow', None,
            _('follow changeset history, or file history across copies and renames')),
           ('', 'follow-first', None,
            _('only follow the first parent of merge changesets')),
           ('d', 'date', '', _('show revisions matching date spec')),
           ('C', 'copies', None, _('show copied files')),
           ('k', 'keyword', [], _('do case-insensitive search for a keyword')),
           ('r', 'rev', [], _('show the specified revision or range')),
           ('', 'removed', None, _('include revisions where files were removed')),
           ('m', 'only-merges', None, _('show only merges')),
           ('u', 'user', [], _('revisions committed by user')),
           ('b', 'only-branch', [],
             _('show only changesets within the given named branch')),
           ('P', 'prune', [], _('do not display revision or any of its ancestors')),
          ] + logopts + walkopts,
          _('[OPTION]... [FILE]')),
     "manifest":
         (manifest,
          [('r', 'rev', '', _('revision to display'))],
          _('[-r REV]')),
     "^merge":
         (merge,
          [('f', 'force', None, _('force a merge with outstanding changes')),
           ('r', 'rev', '', _('revision to merge')),
           ('S', 'show', None,
            _('review revisions to merge (no merge is performed)'))],
          _('[-f] [[-r] REV]')),
     "outgoing|out":
         (outgoing,
          [('f', 'force', None,
            _('run even when remote repository is unrelated')),
           ('r', 'rev', [],
            _('a specific revision up to which you would like to push')),
           ('n', 'newest-first', None, _('show newest record first')),
          ] + logopts + remoteopts,
          _('[-M] [-p] [-n] [-f] [-r REV]... [DEST]')),
     "^parents":
         (parents,
          [('r', 'rev', '', _('show parents from the specified revision')),
          ] + templateopts,
          _('[-r REV] [FILE]')),
     "paths": (paths, [], _('[NAME]')),
     "^pull":
         (pull,
          [('u', 'update', None,
            _('update to new tip if changesets were pulled')),
           ('f', 'force', None,
            _('run even when remote repository is unrelated')),
           ('r', 'rev', [],
            _('a specific revision up to which you would like to pull')),
          ] + remoteopts,
          _('[-u] [-f] [-r REV]... [-e CMD] [--remotecmd CMD] [SOURCE]')),
     "^push":
         (push,
          [('f', 'force', None, _('force push')),
           ('r', 'rev', [],
            _('a specific revision up to which you would like to push')),
          ] + remoteopts,
          _('[-f] [-r REV]... [-e CMD] [--remotecmd CMD] [DEST]')),
     "recover": (recover, []),
     "^remove|rm":
         (remove,
          [('A', 'after', None, _('record delete for missing files')),
           ('f', 'force', None,
            _('remove (and delete) file even if added or modified')),
          ] + walkopts,
          _('[OPTION]... FILE...')),
     "rename|mv":
         (rename,
          [('A', 'after', None, _('record a rename that has already occurred')),
           ('f', 'force', None,
            _('forcibly copy over an existing managed file')),
          ] + walkopts + dryrunopts,
          _('[OPTION]... SOURCE... DEST')),
     "resolve":
         (resolve,
          [('a', 'all', None, _('remerge all unresolved files')),
           ('l', 'list', None, _('list state of files needing merge')),
           ('m', 'mark', None, _('mark files as resolved')),
           ('u', 'unmark', None, _('unmark files as resolved'))]
           + walkopts,
           _('[OPTION]... [FILE]...')),
     "revert":
         (revert,
          [('a', 'all', None, _('revert all changes when no arguments given')),
           ('d', 'date', '', _('tipmost revision matching date')),
           ('r', 'rev', '', _('revision to revert to')),
           ('', 'no-backup', None, _('do not save backup copies of files')),
          ] + walkopts + dryrunopts,
          _('[OPTION]... [-r REV] [NAME]...')),
     "rollback": (rollback, []),
     "root": (root, []),
     "^serve":
         (serve,
          [('A', 'accesslog', '', _('name of access log file to write to')),
           ('d', 'daemon', None, _('run server in background')),
           ('', 'daemon-pipefds', '', _('used internally by daemon mode')),
           ('E', 'errorlog', '', _('name of error log file to write to')),
           ('p', 'port', 0, _('port to listen on (default: 8000)')),
           ('a', 'address', '', _('address to listen on (default: all interfaces)')),
           ('', 'prefix', '', _('prefix path to serve from (default: server root)')),
           ('n', 'name', '',
            _('name to show in web pages (default: working directory)')),
           ('', 'webdir-conf', '', _('name of the webdir config file'
                                     ' (serve more than one repository)')),
           ('', 'pid-file', '', _('name of file to write process ID to')),
           ('', 'stdio', None, _('for remote clients')),
           ('t', 'templates', '', _('web templates to use')),
           ('', 'style', '', _('template style to use')),
           ('6', 'ipv6', None, _('use IPv6 in addition to IPv4')),
           ('', 'certificate', '', _('SSL certificate file'))],
          _('[OPTION]...')),
     "showconfig|debugconfig":
         (showconfig,
          [('u', 'untrusted', None, _('show untrusted configuration options'))],
          _('[-u] [NAME]...')),
     "^status|st":
         (status,
          [('A', 'all', None, _('show status of all files')),
           ('m', 'modified', None, _('show only modified files')),
           ('a', 'added', None, _('show only added files')),
           ('r', 'removed', None, _('show only removed files')),
           ('d', 'deleted', None, _('show only deleted (but tracked) files')),
           ('c', 'clean', None, _('show only files without changes')),
           ('u', 'unknown', None, _('show only unknown (not tracked) files')),
           ('i', 'ignored', None, _('show only ignored files')),
           ('n', 'no-status', None, _('hide status prefix')),
           ('C', 'copies', None, _('show source of copied files')),
           ('0', 'print0', None,
            _('end filenames with NUL, for use with xargs')),
           ('', 'rev', [], _('show difference from revision')),
          ] + walkopts,
          _('[OPTION]... [FILE]...')),
     "tag":
         (tag,
          [('f', 'force', None, _('replace existing tag')),
           ('l', 'local', None, _('make the tag local')),
           ('r', 'rev', '', _('revision to tag')),
           ('', 'remove', None, _('remove a tag')),
           # -l/--local is already there, commitopts cannot be used
           ('m', 'message', '', _('use <text> as commit message')),
          ] + commitopts2,
          _('[-l] [-m TEXT] [-d DATE] [-u USER] [-r REV] NAME...')),
     "tags": (tags, []),
     "tip":
         (tip,
          [('p', 'patch', None, _('show patch')),
           ('g', 'git', None, _('use git extended diff format')),
          ] + templateopts,
          _('[-p]')),
     "unbundle":
         (unbundle,
          [('u', 'update', None,
            _('update to new tip if changesets were unbundled'))],
          _('[-u] FILE...')),
     "^update|up|checkout|co":
         (update,
          [('C', 'clean', None, _('overwrite locally modified files (no backup)')),
           ('d', 'date', '', _('tipmost revision matching date')),
           ('r', 'rev', '', _('revision'))],
          _('[-C] [-d DATE] [[-r] REV]')),
     "verify": (verify, []),
     "version": (version_, []),
 }
 
 norepo = ("clone init version help debugcommands debugcomplete debugdata"
           " debugindex debugindexdot debugdate debuginstall debugfsinfo")
 optionalrepo = ("identify paths serve showconfig debugancestor")

mercurial/context.py

@@ -1,808 +1,812
 # context.py - changeset and file context objects for mercurial
 #
 # Copyright 2006, 2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
 from node import nullid, nullrev, short, hex
 from i18n import _
-import ancestor, bdiff, error, util
+import ancestor, bdiff, error, util, subrepo
 import os, errno
 
 propertycache = util.propertycache
 
 class changectx(object):
     """A changecontext object makes access to data related to a particular
     changeset convenient."""
     def __init__(self, repo, changeid=''):
         """changeid is a revision number, node, or tag"""
         if changeid == '':
             changeid = '.'
         self._repo = repo
         if isinstance(changeid, (long, int)):
             self._rev = changeid
             self._node = self._repo.changelog.node(changeid)
         else:
             self._node = self._repo.lookup(changeid)
             self._rev = self._repo.changelog.rev(self._node)
 
     def __str__(self):
         return short(self.node())
 
     def __int__(self):
         return self.rev()
 
     def __repr__(self):
         return "<changectx %s>" % str(self)
 
     def __hash__(self):
         try:
             return hash(self._rev)
         except AttributeError:
             return id(self)
 
     def __eq__(self, other):
         try:
             return self._rev == other._rev
         except AttributeError:
             return False
 
     def __ne__(self, other):
         return not (self == other)
 
     def __nonzero__(self):
         return self._rev != nullrev
 
     @propertycache
     def _changeset(self):
         return self._repo.changelog.read(self.node())
 
     @propertycache
     def _manifest(self):
         return self._repo.manifest.read(self._changeset[0])
 
     @propertycache
     def _manifestdelta(self):
         return self._repo.manifest.readdelta(self._changeset[0])
 
     @propertycache
     def _parents(self):
         p = self._repo.changelog.parentrevs(self._rev)
         if p[1] == nullrev:
             p = p[:-1]
         return [changectx(self._repo, x) for x in p]
 
+    @propertycache
+    def substate(self):
+        return subrepo.state(self)
+
     def __contains__(self, key):
         return key in self._manifest
 
     def __getitem__(self, key):
         return self.filectx(key)
 
     def __iter__(self):
         for f in sorted(self._manifest):
             yield f
 
     def changeset(self): return self._changeset
     def manifest(self): return self._manifest
     def manifestnode(self): return self._changeset[0]
 
     def rev(self): return self._rev
     def node(self): return self._node
     def hex(self): return hex(self._node)
     def user(self): return self._changeset[1]
     def date(self): return self._changeset[2]
     def files(self): return self._changeset[3]
     def description(self): return self._changeset[4]
     def branch(self): return self._changeset[5].get("branch")
     def extra(self): return self._changeset[5]
     def tags(self): return self._repo.nodetags(self._node)
 
     def parents(self):
         """return contexts for each parent changeset"""
         return self._parents
 
     def p1(self):
         return self._parents[0]
 
     def p2(self):
         if len(self._parents) == 2:
             return self._parents[1]
         return changectx(self._repo, -1)
 
     def children(self):
         """return contexts for each child changeset"""
         c = self._repo.changelog.children(self._node)
         return [changectx(self._repo, x) for x in c]
 
     def ancestors(self):
         for a in self._repo.changelog.ancestors(self._rev):
             yield changectx(self._repo, a)
 
     def descendants(self):
         for d in self._repo.changelog.descendants(self._rev):
             yield changectx(self._repo, d)
 
     def _fileinfo(self, path):
         if '_manifest' in self.__dict__:
             try:
                 return self._manifest[path], self._manifest.flags(path)
             except KeyError:
                 raise error.LookupError(self._node, path,
                                         _('not found in manifest'))
         if '_manifestdelta' in self.__dict__ or path in self.files():
             if path in self._manifestdelta:
                 return self._manifestdelta[path], self._manifestdelta.flags(path)
         node, flag = self._repo.manifest.find(self._changeset[0], path)
         if not node:
             raise error.LookupError(self._node, path,
                                     _('not found in manifest'))
 
         return node, flag
 
     def filenode(self, path):
         return self._fileinfo(path)[0]
 
     def flags(self, path):
         try:
             return self._fileinfo(path)[1]
         except error.LookupError:
             return ''
 
     def filectx(self, path, fileid=None, filelog=None):
         """get a file context from this changeset"""
         if fileid is None:
             fileid = self.filenode(path)
         return filectx(self._repo, path, fileid=fileid,
                        changectx=self, filelog=filelog)
 
     def ancestor(self, c2):
         """
         return the ancestor context of self and c2
         """
         n = self._repo.changelog.ancestor(self._node, c2._node)
         return changectx(self._repo, n)
 
     def walk(self, match):
         fset = set(match.files())
         # for dirstate.walk, files=['.'] means "walk the whole tree".
         # follow that here, too
         fset.discard('.')
         for fn in self:
             for ffn in fset:
                 # match if the file is the exact name or a directory
                 if ffn == fn or fn.startswith("%s/" % ffn):
                     fset.remove(ffn)
                     break
             if match(fn):
                 yield fn
         for fn in sorted(fset):
             if match.bad(fn, 'No such file in rev ' + str(self)) and match(fn):
                 yield fn
 
 class filectx(object):
     """A filecontext object makes access to data related to a particular
        filerevision convenient."""
     def __init__(self, repo, path, changeid=None, fileid=None,
                  filelog=None, changectx=None):
         """changeid can be a changeset revision, node, or tag.
            fileid can be a file revision or node."""
         self._repo = repo
         self._path = path
 
         assert (changeid is not None
                 or fileid is not None
                 or changectx is not None)
 
         if filelog:
             self._filelog = filelog
 
         if changeid is not None:
             self._changeid = changeid
         if changectx is not None:
             self._changectx = changectx
         if fileid is not None:
             self._fileid = fileid
 
     @propertycache
     def _changectx(self):
         return changectx(self._repo, self._changeid)
 
     @propertycache
     def _filelog(self):
         return self._repo.file(self._path)
 
     @propertycache
     def _changeid(self):
         if '_changectx' in self.__dict__:
             return self._changectx.rev()
         else:
             return self._filelog.linkrev(self._filerev)
 
     @propertycache
     def _filenode(self):
         if '_fileid' in self.__dict__:
             return self._filelog.lookup(self._fileid)
         else:
             return self._changectx.filenode(self._path)
 
     @propertycache
     def _filerev(self):
         return self._filelog.rev(self._filenode)
 
     @propertycache
     def _repopath(self):
         return self._path
 
     def __nonzero__(self):
         try:
             self._filenode
             return True
         except error.LookupError:
             # file is missing
             return False
 
     def __str__(self):
         return "%s@%s" % (self.path(), short(self.node()))
 
     def __repr__(self):
         return "<filectx %s>" % str(self)
 
     def __hash__(self):
         try:
             return hash((self._path, self._fileid))
         except AttributeError:
             return id(self)
 
     def __eq__(self, other):
         try:
             return (self._path == other._path
                     and self._fileid == other._fileid)
         except AttributeError:
             return False
 
     def __ne__(self, other):
         return not (self == other)
 
     def filectx(self, fileid):
         '''opens an arbitrary revision of the file without
         opening a new filelog'''
         return filectx(self._repo, self._path, fileid=fileid,
                        filelog=self._filelog)
 
     def filerev(self): return self._filerev
     def filenode(self): return self._filenode
     def flags(self): return self._changectx.flags(self._path)
     def filelog(self): return self._filelog
 
     def rev(self):
         if '_changectx' in self.__dict__:
             return self._changectx.rev()
         if '_changeid' in self.__dict__:
             return self._changectx.rev()
         return self._filelog.linkrev(self._filerev)
 
     def linkrev(self): return self._filelog.linkrev(self._filerev)
     def node(self): return self._changectx.node()
     def user(self): return self._changectx.user()
     def date(self): return self._changectx.date()
     def files(self): return self._changectx.files()
     def description(self): return self._changectx.description()
     def branch(self): return self._changectx.branch()
     def manifest(self): return self._changectx.manifest()
     def changectx(self): return self._changectx
 
     def data(self): return self._filelog.read(self._filenode)
     def path(self): return self._path
     def size(self): return self._filelog.size(self._filerev)
 
     def cmp(self, text): return self._filelog.cmp(self._filenode, text)
 
     def renamed(self):
         """check if file was actually renamed in this changeset revision
 
         If rename logged in file revision, we report copy for changeset only
         if file revisions linkrev points back to the changeset in question
         or both changeset parents contain different file revisions.
         """
 
         renamed = self._filelog.renamed(self._filenode)
         if not renamed:
             return renamed
 
         if self.rev() == self.linkrev():
             return renamed
 
         name = self.path()
         fnode = self._filenode
         for p in self._changectx.parents():
             try:
                 if fnode == p.filenode(name):
                     return None
             except error.LookupError:
                 pass
         return renamed
 
     def parents(self):
         p = self._path
         fl = self._filelog
         pl = [(p, n, fl) for n in self._filelog.parents(self._filenode)]
 
         r = self._filelog.renamed(self._filenode)
         if r:
             pl[0] = (r[0], r[1], None)
 
         return [filectx(self._repo, p, fileid=n, filelog=l)
                 for p,n,l in pl if n != nullid]
 
     def children(self):
         # hard for renames
         c = self._filelog.children(self._filenode)
         return [filectx(self._repo, self._path, fileid=x,
                         filelog=self._filelog) for x in c]
 
     def annotate(self, follow=False, linenumber=None):
         '''returns a list of tuples of (ctx, line) for each line
         in the file, where ctx is the filectx of the node where
         that line was last changed.
         This returns tuples of ((ctx, linenumber), line) for each line,
         if "linenumber" parameter is NOT "None".
         In such tuples, linenumber means one at the first appearance
         in the managed file.
         To reduce annotation cost,
         this returns fixed value(False is used) as linenumber,
         if "linenumber" parameter is "False".'''
 
         def decorate_compat(text, rev):
             return ([rev] * len(text.splitlines()), text)
 
         def without_linenumber(text, rev):
             return ([(rev, False)] * len(text.splitlines()), text)
 
         def with_linenumber(text, rev):
             size = len(text.splitlines())
             return ([(rev, i) for i in xrange(1, size + 1)], text)
 
         decorate = (((linenumber is None) and decorate_compat) or
                     (linenumber and with_linenumber) or
                     without_linenumber)
 
         def pair(parent, child):
             for a1, a2, b1, b2 in bdiff.blocks(parent[1], child[1]):
                 child[0][b1:b2] = parent[0][a1:a2]
             return child
 
         getlog = util.cachefunc(lambda x: self._repo.file(x))
         def getctx(path, fileid):
             log = path == self._path and self._filelog or getlog(path)
             return filectx(self._repo, path, fileid=fileid, filelog=log)
         getctx = util.cachefunc(getctx)
 
         def parents(f):
             # we want to reuse filectx objects as much as possible
             p = f._path
             if f._filerev is None: # working dir
                 pl = [(n.path(), n.filerev()) for n in f.parents()]
             else:
                 pl = [(p, n) for n in f._filelog.parentrevs(f._filerev)]
 
             if follow:
                 r = f.renamed()
                 if r:
                     pl[0] = (r[0], getlog(r[0]).rev(r[1]))
 
             return [getctx(p, n) for p, n in pl if n != nullrev]
 
         # use linkrev to find the first changeset where self appeared
         if self.rev() != self.linkrev():
             base = self.filectx(self.filerev())
         else:
             base = self
 
         # find all ancestors
         needed = {base: 1}
         visit = [base]
         files = [base._path]
         while visit:
             f = visit.pop(0)
             for p in parents(f):
                 if p not in needed:
                     needed[p] = 1
                     visit.append(p)
                     if p._path not in files:
                         files.append(p._path)
                 else:
                     # count how many times we'll use this
                     needed[p] += 1
 
         # sort by revision (per file) which is a topological order
         visit = []
         for f in files:
             fn = [(n.rev(), n) for n in needed if n._path == f]
             visit.extend(fn)
 
         hist = {}
         for r, f in sorted(visit):
             curr = decorate(f.data(), f)
             for p in parents(f):
                 if p != nullid:
                     curr = pair(hist[p], curr)
                     # trim the history of unneeded revs
                     needed[p] -= 1
                     if not needed[p]:
                         del hist[p]
             hist[f] = curr
 
         return zip(hist[f][0], hist[f][1].splitlines(1))
 
     def ancestor(self, fc2):
         """
         find the common ancestor file context, if any, of self, and fc2
         """
 
         acache = {}
 
         # prime the ancestor cache for the working directory
         for c in (self, fc2):
             if c._filerev is None:
                 pl = [(n.path(), n.filenode()) for n in c.parents()]
                 acache[(c._path, None)] = pl
 
         flcache = {self._repopath:self._filelog, fc2._repopath:fc2._filelog}
         def parents(vertex):
             if vertex in acache:
                 return acache[vertex]
             f, n = vertex
             if f not in flcache:
                 flcache[f] = self._repo.file(f)
             fl = flcache[f]
             pl = [(f, p) for p in fl.parents(n) if p != nullid]
             re = fl.renamed(n)
             if re:
                 pl.append(re)
             acache[vertex] = pl
             return pl
 
         a, b = (self._path, self._filenode), (fc2._path, fc2._filenode)
         v = ancestor.ancestor(a, b, parents)
         if v:
             f, n = v
             return filectx(self._repo, f, fileid=n, filelog=flcache[f])
 
         return None
 
 class workingctx(changectx):
     """A workingctx object makes access to data related to
     the current working directory convenient.
     parents - a pair of parent nodeids, or None to use the dirstate.
     date - any valid date string or (unixtime, offset), or None.
     user - username string, or None.
     extra - a dictionary of extra values, or None.
     changes - a list of file lists as returned by localrepo.status()
                or None to use the repository status.
     """
     def __init__(self, repo, parents=None, text="", user=None, date=None,
                  extra=None, changes=None):
         self._repo = repo
         self._rev = None
         self._node = None
         self._text = text
         if date:
             self._date = util.parsedate(date)
         if user:
             self._user = user
         if parents:
             self._parents = [changectx(self._repo, p) for p in parents]
         if changes:
             self._status = list(changes)
 
         self._extra = {}
         if extra:
             self._extra = extra.copy()
         if 'branch' not in self._extra:
             branch = self._repo.dirstate.branch()
             try:
                 branch = branch.decode('UTF-8').encode('UTF-8')
             except UnicodeDecodeError:
                 raise util.Abort(_('branch name not in UTF-8!'))
             self._extra['branch'] = branch
         if self._extra['branch'] == '':
             self._extra['branch'] = 'default'
 
     def __str__(self):
         return str(self._parents[0]) + "+"
 
     def __nonzero__(self):
         return True
 
     def __contains__(self, key):
         return self._repo.dirstate[key] not in "?r"
 
     @propertycache
     def _manifest(self):
         """generate a manifest corresponding to the working directory"""
 
         man = self._parents[0].manifest().copy()
         copied = self._repo.dirstate.copies()
         cf = lambda x: man.flags(copied.get(x, x))
         ff = self._repo.dirstate.flagfunc(cf)
         modified, added, removed, deleted, unknown = self._status[:5]
         for i, l in (("a", added), ("m", modified), ("u", unknown)):
             for f in l:
                 man[f] = man.get(copied.get(f, f), nullid) + i
                 try:
                     man.set(f, ff(f))
                 except OSError:
                     pass
 
         for f in deleted + removed:
             if f in man:
                 del man[f]
 
         return man
 
     @propertycache
     def _status(self):
         return self._repo.status(unknown=True)
 
     @propertycache
     def _user(self):
         return self._repo.ui.username()
 
     @propertycache
     def _date(self):
         return util.makedate()
 
     @propertycache
     def _parents(self):
         p = self._repo.dirstate.parents()
         if p[1] == nullid:
             p = p[:-1]
         self._parents = [changectx(self._repo, x) for x in p]
         return self._parents
 
     def manifest(self): return self._manifest
 
     def user(self): return self._user or self._repo.ui.username()
     def date(self): return self._date
     def description(self): return self._text
     def files(self):
         return sorted(self._status[0] + self._status[1] + self._status[2])
 
     def modified(self): return self._status[0]
     def added(self): return self._status[1]
     def removed(self): return self._status[2]
     def deleted(self): return self._status[3]
     def unknown(self): return self._status[4]
     def clean(self): return self._status[5]
     def branch(self): return self._extra['branch']
     def extra(self): return self._extra
 
     def tags(self):
         t = []
         [t.extend(p.tags()) for p in self.parents()]
         return t
 
     def children(self):
         return []
 
     def flags(self, path):
         if '_manifest' in self.__dict__:
             try:
                 return self._manifest.flags(path)
             except KeyError:
                 return ''
 
         pnode = self._parents[0].changeset()[0]
         orig = self._repo.dirstate.copies().get(path, path)
         node, flag = self._repo.manifest.find(pnode, orig)
         try:
             ff = self._repo.dirstate.flagfunc(lambda x: flag or '')
             return ff(path)
         except OSError:
             pass
 
         if not node or path in self.deleted() or path in self.removed():
             return ''
         return flag
 
     def filectx(self, path, filelog=None):
         """get a file context from the working directory"""
         return workingfilectx(self._repo, path, workingctx=self,
                               filelog=filelog)
 
     def ancestor(self, c2):
         """return the ancestor context of self and c2"""
         return self._parents[0].ancestor(c2) # punt on two parents for now
 
     def walk(self, match):
         return sorted(self._repo.dirstate.walk(match, True, False))
 
     def dirty(self, missing=False):
         "check whether a working directory is modified"
 
         return (self.p2() or self.branch() != self.p1().branch() or
                 self.modified() or self.added() or self.removed() or
                 (missing and self.deleted()))
 
 class workingfilectx(filectx):
     """A workingfilectx object makes access to data related to a particular
        file in the working directory convenient."""
     def __init__(self, repo, path, filelog=None, workingctx=None):
         """changeid can be a changeset revision, node, or tag.
            fileid can be a file revision or node."""
         self._repo = repo
         self._path = path
         self._changeid = None
         self._filerev = self._filenode = None
 
         if filelog:
             self._filelog = filelog
         if workingctx:
             self._changectx = workingctx
 
     @propertycache
     def _changectx(self):
         return workingctx(self._repo)
 
     def __nonzero__(self):
         return True
 
     def __str__(self):
         return "%s@%s" % (self.path(), self._changectx)
 
     def data(self): return self._repo.wread(self._path)
     def renamed(self):
         rp = self._repo.dirstate.copied(self._path)
         if not rp:
             return None
         return rp, self._changectx._parents[0]._manifest.get(rp, nullid)
 
     def parents(self):
         '''return parent filectxs, following copies if necessary'''
         def filenode(ctx, path):
             return ctx._manifest.get(path, nullid)
 
         path = self._path
         fl = self._filelog
         pcl = self._changectx._parents
         renamed = self.renamed()
 
         if renamed:
             pl = [renamed + (None,)]
         else:
             pl = [(path, filenode(pcl[0], path), fl)]
 
         for pc in pcl[1:]:
             pl.append((path, filenode(pc, path), fl))
 
         return [filectx(self._repo, p, fileid=n, filelog=l)
                 for p,n,l in pl if n != nullid]
 
     def children(self):
         return []
 
     def size(self): return os.stat(self._repo.wjoin(self._path)).st_size
     def date(self):
         t, tz = self._changectx.date()
         try:
             return (int(os.lstat(self._repo.wjoin(self._path)).st_mtime), tz)
         except OSError, err:
             if err.errno != errno.ENOENT: raise
             return (t, tz)
 
     def cmp(self, text): return self._repo.wread(self._path) == text
 
 class memctx(object):
     """Use memctx to perform in-memory commits via localrepo.commitctx().
 
     Revision information is supplied at initialization time while
     related files data and is made available through a callback
     mechanism.  'repo' is the current localrepo, 'parents' is a
     sequence of two parent revisions identifiers (pass None for every
     missing parent), 'text' is the commit message and 'files' lists
     names of files touched by the revision (normalized and relative to
     repository root).
 
     filectxfn(repo, memctx, path) is a callable receiving the
     repository, the current memctx object and the normalized path of
     requested file, relative to repository root. It is fired by the
     commit function for every file in 'files', but calls order is
     undefined. If the file is available in the revision being
     committed (updated or added), filectxfn returns a memfilectx
     object. If the file was removed, filectxfn raises an
     IOError. Moved files are represented by marking the source file
     removed and the new file added with copy information (see
     memfilectx).
 
     user receives the committer name and defaults to current
     repository username, date is the commit date in any format
     supported by util.parsedate() and defaults to current date, extra
     is a dictionary of metadata or is left empty.
     """
     def __init__(self, repo, parents, text, files, filectxfn, user=None,
                  date=None, extra=None):
         self._repo = repo
         self._rev = None
         self._node = None
         self._text = text
         self._date = date and util.parsedate(date) or util.makedate()
         self._user = user
         parents = [(p or nullid) for p in parents]
         p1, p2 = parents
         self._parents = [changectx(self._repo, p) for p in (p1, p2)]
         files = sorted(set(files))
         self._status = [files, [], [], [], []]
         self._filectxfn = filectxfn
 
         self._extra = extra and extra.copy() or {}
         if 'branch' not in self._extra:
             self._extra['branch'] = 'default'
         elif self._extra.get('branch') == '':
             self._extra['branch'] = 'default'
 
     def __str__(self):
         return str(self._parents[0]) + "+"
 
     def __int__(self):
         return self._rev
 
     def __nonzero__(self):
         return True
 
     def __getitem__(self, key):
         return self.filectx(key)
 
     def p1(self): return self._parents[0]
     def p2(self): return self._parents[1]
 
     def user(self): return self._user or self._repo.ui.username()
     def date(self): return self._date
     def description(self): return self._text
     def files(self): return self.modified()
     def modified(self): return self._status[0]
     def added(self): return self._status[1]
     def removed(self): return self._status[2]
     def deleted(self): return self._status[3]
     def unknown(self): return self._status[4]
     def clean(self): return self._status[5]
     def branch(self): return self._extra['branch']
     def extra(self): return self._extra
     def flags(self, f): return self[f].flags()
 
     def parents(self):
         """return contexts for each parent changeset"""
         return self._parents
 
     def filectx(self, path, filelog=None):
         """get a file context from the working directory"""
         return self._filectxfn(self._repo, self, path)
 
 class memfilectx(object):
     """memfilectx represents an in-memory file to commit.
 
     See memctx for more details.
     """
     def __init__(self, path, data, islink, isexec, copied):
         """
         path is the normalized file path relative to repository root.
         data is the file content as a string.
         islink is True if the file is a symbolic link.
         isexec is True if the file is executable.
         copied is the source file path if current file was copied in the
         revision being committed, or None."""
         self._path = path
         self._data = data
         self._flags = (islink and 'l' or '') + (isexec and 'x' or '')
         self._copied = None
         if copied:
             self._copied = (copied, nullid)
 
     def __nonzero__(self): return True
     def __str__(self): return "%s@%s" % (self.path(), self._changectx)
     def path(self): return self._path
     def data(self): return self._data
     def flags(self): return self._flags
     def isexec(self): return 'x' in self._flags
     def islink(self): return 'l' in self._flags
     def renamed(self): return self._copied

tests/test-debugcomplete.out

@@ -1,225 +1,227
 % Show all commands except debug commands
 add
 addremove
 annotate
 archive
 backout
 bisect
 branch
 branches
 bundle
 cat
 clone
 commit
 copy
 diff
 export
 grep
 heads
 help
 identify
 import
 incoming
 init
 locate
 log
 manifest
 merge
 outgoing
 parents
 paths
 pull
 push
 recover
 remove
 rename
 resolve
 revert
 rollback
 root
 serve
 showconfig
 status
 tag
 tags
 tip
 unbundle
 update
 verify
 version
 
 % Show all commands that start with "a"
 add
 addremove
 annotate
 archive
 
 % Do not show debug commands if there are other candidates
 diff
 
 % Show debug commands if there are no other candidates
 debugancestor
 debugcheckstate
 debugcommands
 debugcomplete
 debugconfig
 debugdata
 debugdate
 debugfsinfo
 debugindex
 debugindexdot
 debuginstall
 debugrebuildstate
 debugrename
 debugsetparents
 debugstate
+debugsub
 debugwalk
 
 % Do not show the alias of a debug command if there are other candidates
 % (this should hide rawcommit)
 recover
 remove
 rename
 resolve
 revert
 rollback
 root
 
 % Show the alias of a debug command if there are no other candidates
 
 
 % Show the global options
 --config
 --cwd
 --debug
 --debugger
 --encoding
 --encodingmode
 --help
 --noninteractive
 --profile
 --quiet
 --repository
 --time
 --traceback
 --verbose
 --version
 -R
 -h
 -q
 -v
 -y
 
 % Show the options for the "serve" command
 --accesslog
 --address
 --certificate
 --config
 --cwd
 --daemon
 --daemon-pipefds
 --debug
 --debugger
 --encoding
 --encodingmode
 --errorlog
 --help
 --ipv6
 --name
 --noninteractive
 --pid-file
 --port
 --prefix
 --profile
 --quiet
 --repository
 --stdio
 --style
 --templates
 --time
 --traceback
 --verbose
 --version
 --webdir-conf
 -6
 -A
 -E
 -R
 -a
 -d
 -h
 -n
 -p
 -q
 -t
 -v
 -y
 
 % Show an error if we use --options with an ambiguous abbreviation
 hg: command 's' is ambiguous:
     serve showconfig status
 
 % Show all commands + options
 add: include, exclude, dry-run
 annotate: rev, follow, text, user, date, number, changeset, line-number, include, exclude
 clone: noupdate, rev, pull, uncompressed, ssh, remotecmd
 commit: addremove, close-branch, include, exclude, message, logfile, date, user
 diff: rev, change, text, git, nodates, show-function, ignore-all-space, ignore-space-change, ignore-blank-lines, unified, include, exclude
 export: output, switch-parent, text, git, nodates
 init: ssh, remotecmd
 log: follow, follow-first, date, copies, keyword, rev, removed, only-merges, user, only-branch, prune, patch, git, limit, no-merges, style, template, include, exclude
 merge: force, rev, show
 parents: rev, style, template
 pull: update, force, rev, ssh, remotecmd
 push: force, rev, ssh, remotecmd
 remove: after, force, include, exclude
 serve: accesslog, daemon, daemon-pipefds, errorlog, port, address, prefix, name, webdir-conf, pid-file, stdio, templates, style, ipv6, certificate
 status: all, modified, added, removed, deleted, clean, unknown, ignored, no-status, copies, print0, rev, include, exclude
 update: clean, date, rev
 addremove: similarity, include, exclude, dry-run
 archive: no-decode, prefix, rev, type, include, exclude
 backout: merge, parent, rev, include, exclude, message, logfile, date, user
 bisect: reset, good, bad, skip, command, noupdate
 branch: force, clean
 branches: active
 bundle: force, rev, base, all, type, ssh, remotecmd
 cat: output, rev, decode, include, exclude
 copy: after, force, include, exclude, dry-run
 debugancestor: 
 debugcheckstate: 
 debugcommands: 
 debugcomplete: options
 debugdata: 
 debugdate: extended
 debugfsinfo: 
 debugindex: 
 debugindexdot: 
 debuginstall: 
 debugrebuildstate: rev
 debugrename: rev
 debugsetparents: 
 debugstate: nodates
+debugsub: rev
 debugwalk: include, exclude
 grep: print0, all, follow, ignore-case, files-with-matches, line-number, rev, user, date, include, exclude
 heads: rev, active, closed, style, template
 help: 
 identify: rev, num, id, branch, tags
 import: strip, base, force, no-commit, exact, import-branch, message, logfile, date, user, similarity
 incoming: force, newest-first, bundle, rev, patch, git, limit, no-merges, style, template, ssh, remotecmd
 locate: rev, print0, fullpath, include, exclude
 manifest: rev
 outgoing: force, rev, newest-first, patch, git, limit, no-merges, style, template, ssh, remotecmd
 paths: 
 recover: 
 rename: after, force, include, exclude, dry-run
 resolve: all, list, mark, unmark, include, exclude
 revert: all, date, rev, no-backup, include, exclude, dry-run
 rollback: 
 root: 
 showconfig: untrusted
 tag: force, local, rev, remove, message, date, user
 tags: 
 tip: patch, git, style, template
 unbundle: update
 verify: 
 version: