bundlerepo: indent some code to prepare next patch

We are about to add a new condition. Code is indented in a separated patch for
readability.

mercurial/bundlerepo.py

@@ -1,503 +1,505
 # bundlerepo.py - repository class for viewing uncompressed bundles
 #
 # Copyright 2006, 2007 Benoit Boissinot <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 """Repository class for viewing uncompressed bundles.
 
 This provides a read-only repository interface to bundles as if they
 were part of the actual repository.
 """
 
 from __future__ import absolute_import
 
 import os
 import shutil
 import tempfile
 
 from .i18n import _
 from .node import nullid
 
 from . import (
     bundle2,
     changegroup,
     changelog,
     cmdutil,
     discovery,
     error,
     exchange,
     filelog,
     localrepo,
     manifest,
     mdiff,
     pathutil,
     phases,
     revlog,
     scmutil,
     util,
 )
 
 class bundlerevlog(revlog.revlog):
     def __init__(self, opener, indexfile, bundle, linkmapper):
         # How it works:
         # To retrieve a revision, we need to know the offset of the revision in
         # the bundle (an unbundle object). We store this offset in the index
         # (start). The base of the delta is stored in the base field.
         #
         # To differentiate a rev in the bundle from a rev in the revlog, we
         # check revision against repotiprev.
         opener = scmutil.readonlyvfs(opener)
         revlog.revlog.__init__(self, opener, indexfile)
         self.bundle = bundle
         n = len(self)
         self.repotiprev = n - 1
         chain = None
         self.bundlerevs = set() # used by 'bundle()' revset expression
         while True:
             chunkdata = bundle.deltachunk(chain)
             if not chunkdata:
                 break
             node = chunkdata['node']
             p1 = chunkdata['p1']
             p2 = chunkdata['p2']
             cs = chunkdata['cs']
             deltabase = chunkdata['deltabase']
             delta = chunkdata['delta']
 
             size = len(delta)
             start = bundle.tell() - size
 
             link = linkmapper(cs)
             if node in self.nodemap:
                 # this can happen if two branches make the same change
                 chain = node
                 self.bundlerevs.add(self.nodemap[node])
                 continue
 
             for p in (p1, p2):
                 if p not in self.nodemap:
                     raise error.LookupError(p, self.indexfile,
                                             _("unknown parent"))
 
             if deltabase not in self.nodemap:
                 raise LookupError(deltabase, self.indexfile,
                                   _('unknown delta base'))
 
             baserev = self.rev(deltabase)
             # start, size, full unc. size, base (unused), link, p1, p2, node
             e = (revlog.offset_type(start, 0), size, -1, baserev, link,
                  self.rev(p1), self.rev(p2), node)
             self.index.insert(-1, e)
             self.nodemap[node] = n
             self.bundlerevs.add(n)
             chain = node
             n += 1
 
     def _chunk(self, rev):
         # Warning: in case of bundle, the diff is against what we stored as
         # delta base, not against rev - 1
         # XXX: could use some caching
         if rev <= self.repotiprev:
             return revlog.revlog._chunk(self, rev)
         self.bundle.seek(self.start(rev))
         return self.bundle.read(self.length(rev))
 
     def revdiff(self, rev1, rev2):
         """return or calculate a delta between two revisions"""
         if rev1 > self.repotiprev and rev2 > self.repotiprev:
             # hot path for bundle
             revb = self.index[rev2][3]
             if revb == rev1:
                 return self._chunk(rev2)
         elif rev1 <= self.repotiprev and rev2 <= self.repotiprev:
             return revlog.revlog.revdiff(self, rev1, rev2)
 
         return mdiff.textdiff(self.revision(self.node(rev1)),
                               self.revision(self.node(rev2)))
 
     def revision(self, nodeorrev):
         """return an uncompressed revision of a given node or revision
         number.
         """
         if isinstance(nodeorrev, int):
             rev = nodeorrev
             node = self.node(rev)
         else:
             node = nodeorrev
             rev = self.rev(node)
 
         if node == nullid:
             return ""
 
         text = None
         chain = []
         iterrev = rev
         # reconstruct the revision if it is from a changegroup
         while iterrev > self.repotiprev:
             if self._cache and self._cache[1] == iterrev:
                 text = self._cache[2]
                 break
             chain.append(iterrev)
             iterrev = self.index[iterrev][3]
         if text is None:
             text = self.baserevision(iterrev)
 
         while chain:
             delta = self._chunk(chain.pop())
             text = mdiff.patches(text, [delta])
 
         self._checkhash(text, node, rev)
         self._cache = (node, rev, text)
         return text
 
     def baserevision(self, nodeorrev):
         # Revlog subclasses may override 'revision' method to modify format of
         # content retrieved from revlog. To use bundlerevlog with such class one
         # needs to override 'baserevision' and make more specific call here.
         return revlog.revlog.revision(self, nodeorrev)
 
     def addrevision(self, text, transaction, link, p1=None, p2=None, d=None):
         raise NotImplementedError
     def addgroup(self, revs, linkmapper, transaction):
         raise NotImplementedError
     def strip(self, rev, minlink):
         raise NotImplementedError
     def checksize(self):
         raise NotImplementedError
 
 class bundlechangelog(bundlerevlog, changelog.changelog):
     def __init__(self, opener, bundle):
         changelog.changelog.__init__(self, opener)
         linkmapper = lambda x: x
         bundlerevlog.__init__(self, opener, self.indexfile, bundle,
                               linkmapper)
 
     def baserevision(self, nodeorrev):
         # Although changelog doesn't override 'revision' method, some extensions
         # may replace this class with another that does. Same story with
         # manifest and filelog classes.
 
         # This bypasses filtering on changelog.node() and rev() because we need
         # revision text of the bundle base even if it is hidden.
         oldfilter = self.filteredrevs
         try:
             self.filteredrevs = ()
             return changelog.changelog.revision(self, nodeorrev)
         finally:
             self.filteredrevs = oldfilter
 
 class bundlemanifest(bundlerevlog, manifest.manifest):
     def __init__(self, opener, bundle, linkmapper):
         manifest.manifest.__init__(self, opener)
         bundlerevlog.__init__(self, opener, self.indexfile, bundle,
                               linkmapper)
 
     def baserevision(self, nodeorrev):
         node = nodeorrev
         if isinstance(node, int):
             node = self.node(node)
 
         if node in self._mancache:
             result = self._mancache[node][0].text()
         else:
             result = manifest.manifest.revision(self, nodeorrev)
         return result
 
 class bundlefilelog(bundlerevlog, filelog.filelog):
     def __init__(self, opener, path, bundle, linkmapper):
         filelog.filelog.__init__(self, opener, path)
         bundlerevlog.__init__(self, opener, self.indexfile, bundle,
                               linkmapper)
 
     def baserevision(self, nodeorrev):
         return filelog.filelog.revision(self, nodeorrev)
 
 class bundlepeer(localrepo.localpeer):
     def canpush(self):
         return False
 
 class bundlephasecache(phases.phasecache):
     def __init__(self, *args, **kwargs):
         super(bundlephasecache, self).__init__(*args, **kwargs)
         if util.safehasattr(self, 'opener'):
             self.opener = scmutil.readonlyvfs(self.opener)
 
     def write(self):
         raise NotImplementedError
 
     def _write(self, fp):
         raise NotImplementedError
 
     def _updateroots(self, phase, newroots, tr):
         self.phaseroots[phase] = newroots
         self.invalidate()
         self.dirty = True
 
 class bundlerepository(localrepo.localrepository):
     def __init__(self, ui, path, bundlename):
         self._tempparent = None
         try:
             localrepo.localrepository.__init__(self, ui, path)
         except error.RepoError:
             self._tempparent = tempfile.mkdtemp()
             localrepo.instance(ui, self._tempparent, 1)
             localrepo.localrepository.__init__(self, ui, self._tempparent)
         self.ui.setconfig('phases', 'publish', False, 'bundlerepo')
 
         if path:
             self._url = 'bundle:' + util.expandpath(path) + '+' + bundlename
         else:
             self._url = 'bundle:' + bundlename
 
         self.tempfile = None
         f = util.posixfile(bundlename, "rb")
         self.bundlefile = self.bundle = exchange.readbundle(ui, f, bundlename)
         if self.bundle.compressed():
             fdtemp, temp = self.vfs.mkstemp(prefix="hg-bundle-",
                                             suffix=".hg10un")
             self.tempfile = temp
             fptemp = os.fdopen(fdtemp, 'wb')
 
             try:
                 fptemp.write("HG10UN")
                 while True:
                     chunk = self.bundle.read(2**18)
                     if not chunk:
                         break
                     fptemp.write(chunk)
             finally:
                 fptemp.close()
 
             f = self.vfs.open(self.tempfile, mode="rb")
             self.bundlefile = self.bundle = exchange.readbundle(ui, f,
                                                                 bundlename,
                                                                 self.vfs)
 
         if isinstance(self.bundle, bundle2.unbundle20):
             cgparts = [part for part in self.bundle.iterparts()
                        if (part.type == 'changegroup')
                        and (part.params.get('version', '01')
                             in changegroup.packermap)]
 
             if not cgparts:
                 raise util.Abort('No changegroups found')
             version = cgparts[0].params.get('version', '01')
             cgparts = [p for p in cgparts
                        if p.params.get('version', '01') == version]
             if len(cgparts) > 1:
                 raise NotImplementedError("Can't process multiple changegroups")
             part = cgparts[0]
 
             part.seek(0)
             self.bundle = changegroup.packermap[version][1](part, 'UN')
 
         # dict with the mapping 'filename' -> position in the bundle
         self.bundlefilespos = {}
 
         self.firstnewrev = self.changelog.repotiprev + 1
         phases.retractboundary(self, None, phases.draft,
                                [ctx.node() for ctx in self[self.firstnewrev:]])
 
     @localrepo.unfilteredpropertycache
     def _phasecache(self):
         return bundlephasecache(self, self._phasedefaults)
 
     @localrepo.unfilteredpropertycache
     def changelog(self):
         # consume the header if it exists
         self.bundle.changelogheader()
         c = bundlechangelog(self.svfs, self.bundle)
         self.manstart = self.bundle.tell()
         return c
 
     @localrepo.unfilteredpropertycache
     def manifest(self):
         self.bundle.seek(self.manstart)
         # consume the header if it exists
         self.bundle.manifestheader()
         m = bundlemanifest(self.svfs, self.bundle, self.changelog.rev)
         self.filestart = self.bundle.tell()
         return m
 
     @localrepo.unfilteredpropertycache
     def manstart(self):
         self.changelog
         return self.manstart
 
     @localrepo.unfilteredpropertycache
     def filestart(self):
         self.manifest
         return self.filestart
 
     def url(self):
         return self._url
 
     def file(self, f):
         if not self.bundlefilespos:
             self.bundle.seek(self.filestart)
             while True:
                 chunkdata = self.bundle.filelogheader()
                 if not chunkdata:
                     break
                 fname = chunkdata['filename']
                 self.bundlefilespos[fname] = self.bundle.tell()
                 while True:
                     c = self.bundle.deltachunk(None)
                     if not c:
                         break
 
         if f in self.bundlefilespos:
             self.bundle.seek(self.bundlefilespos[f])
             return bundlefilelog(self.svfs, f, self.bundle, self.changelog.rev)
         else:
             return filelog.filelog(self.svfs, f)
 
     def close(self):
         """Close assigned bundle file immediately."""
         self.bundlefile.close()
         if self.tempfile is not None:
             self.vfs.unlink(self.tempfile)
         if self._tempparent:
             shutil.rmtree(self._tempparent, True)
 
     def cancopy(self):
         return False
 
     def peer(self):
         return bundlepeer(self)
 
     def getcwd(self):
         return os.getcwd() # always outside the repo
 
 
 def instance(ui, path, create):
     if create:
         raise util.Abort(_('cannot create new bundle repository'))
     # internal config: bundle.mainreporoot
     parentpath = ui.config("bundle", "mainreporoot", "")
     if not parentpath:
         # try to find the correct path to the working directory repo
         parentpath = cmdutil.findrepo(os.getcwd())
         if parentpath is None:
             parentpath = ''
     if parentpath:
         # Try to make the full path relative so we get a nice, short URL.
         # In particular, we don't want temp dir names in test outputs.
         cwd = os.getcwd()
         if parentpath == cwd:
             parentpath = ''
         else:
             cwd = pathutil.normasprefix(cwd)
             if parentpath.startswith(cwd):
                 parentpath = parentpath[len(cwd):]
     u = util.url(path)
     path = u.localpath()
     if u.scheme == 'bundle':
         s = path.split("+", 1)
         if len(s) == 1:
             repopath, bundlename = parentpath, s[0]
         else:
             repopath, bundlename = s
     else:
         repopath, bundlename = parentpath, path
     return bundlerepository(ui, repopath, bundlename)
 
 class bundletransactionmanager(object):
     def transaction(self):
         return None
 
     def close(self):
         raise NotImplementedError
 
     def release(self):
         raise NotImplementedError
 
 def getremotechanges(ui, repo, other, onlyheads=None, bundlename=None,
                      force=False):
     '''obtains a bundle of changes incoming from other
 
     "onlyheads" restricts the returned changes to those reachable from the
       specified heads.
     "bundlename", if given, stores the bundle to this file path permanently;
       otherwise it's stored to a temp file and gets deleted again when you call
       the returned "cleanupfn".
     "force" indicates whether to proceed on unrelated repos.
 
     Returns a tuple (local, csets, cleanupfn):
 
     "local" is a local repo from which to obtain the actual incoming
       changesets; it is a bundlerepo for the obtained bundle when the
       original "other" is remote.
     "csets" lists the incoming changeset node ids.
     "cleanupfn" must be called without arguments when you're done processing
       the changes; it closes both the original "other" and the one returned
       here.
     '''
     tmp = discovery.findcommonincoming(repo, other, heads=onlyheads,
                                        force=force)
     common, incoming, rheads = tmp
     if not incoming:
         try:
             if bundlename:
                 os.unlink(bundlename)
         except OSError:
             pass
         return repo, [], other.close
 
     commonset = set(common)
     rheads = [x for x in rheads if x not in commonset]
 
     bundle = None
     bundlerepo = None
     localrepo = other.local()
     if bundlename or not localrepo:
         # create a bundle (uncompressed if other repo is not local)
 
-        if other.capable('getbundle'):
-            cg = other.getbundle('incoming', common=common, heads=rheads)
-        elif onlyheads is None and not other.capable('changegroupsubset'):
-            # compat with older servers when pulling all remote heads
-            cg = other.changegroup(incoming, "incoming")
-            rheads = None
-        else:
-            cg = other.changegroupsubset(incoming, rheads, 'incoming')
-        if localrepo:
-            bundletype = "HG10BZ"
-        else:
-            bundletype = "HG10UN"
-        fname = bundle = changegroup.writebundle(ui, cg, bundlename, bundletype)
+        if True:
+            if other.capable('getbundle'):
+                cg = other.getbundle('incoming', common=common, heads=rheads)
+            elif onlyheads is None and not other.capable('changegroupsubset'):
+                # compat with older servers when pulling all remote heads
+                cg = other.changegroup(incoming, "incoming")
+                rheads = None
+            else:
+                cg = other.changegroupsubset(incoming, rheads, 'incoming')
+            if localrepo:
+                bundletype = "HG10BZ"
+            else:
+                bundletype = "HG10UN"
+            fname = bundle = changegroup.writebundle(ui, cg, bundlename,
+                                                     bundletype)
         # keep written bundle?
         if bundlename:
             bundle = None
         if not localrepo:
             # use the created uncompressed bundlerepo
             localrepo = bundlerepo = bundlerepository(repo.baseui, repo.root,
                                                       fname)
             # this repo contains local and other now, so filter out local again
             common = repo.heads()
     if localrepo:
         # Part of common may be remotely filtered
         # So use an unfiltered version
         # The discovery process probably need cleanup to avoid that
         localrepo = localrepo.unfiltered()
 
     csets = localrepo.changelog.findmissing(common, rheads)
 
     if bundlerepo:
         reponodes = [ctx.node() for ctx in bundlerepo[bundlerepo.firstnewrev:]]
         remotephases = other.listkeys('phases')
 
         pullop = exchange.pulloperation(bundlerepo, other, heads=reponodes)
         pullop.trmanager = bundletransactionmanager()
         exchange._pullapplyphases(pullop, remotephases)
 
     def cleanup():
         if bundlerepo:
             bundlerepo.close()
         if bundle:
             os.unlink(bundle)
         other.close()
 
     return (localrepo, csets, cleanup)