exchangev2: start to implement pull with wire protocol v2

Wire protocol version 2 will take a substantially different
approach to exchange than version 1 (at least as far as pulling
is concerned).

This commit establishes a new exchangev2 module for holding
code related to exchange using wire protocol v2. I could have
added things to the existing exchange module. But it is already
quite big. And doing things inline isn't in question because
the existing code is already littered with conditional code
for various states of support for the existing wire protocol
as it evolved over 10+ years. A new module gives us a chance
to make a clean break.

This approach does mean we'll end up writing some duplicate
code. And there's a significant chance we'll miss functionality
as code is ported. The plan is to eventually add #testcase's
to existing tests so the new wire protocol is tested side-by-side
with the existing one. This will hopefully tease out any
features that weren't ported properly. But before we get there,
we need to build up support for the new exchange methods.

Our journey towards implementing a new exchange begins with pulling.
And pulling begins with discovery.

The discovery code added to exchangev2 is heavily drawn from
the following functions:

* exchange._pulldiscoverychangegroup
* discovery.findcommonincoming

For now, we build on top of existing discovery mechanisms. The
new wire protocol should be capable of doing things more efficiently.
But I'd rather defer on this problem.

To foster the transition, we invent a fake capability on the HTTPv2
peer and have the main pull code in exchange.py call into exchangev2
when the new wire protocol is being used.

Differential Revision: https://phab.mercurial-scm.org/D4480

mercurial/exchangev2.py

@@ -0,0 +1,55
+# exchangev2.py - repository exchange for wire protocol version 2
+#
+# Copyright 2018 Gregory Szorc <[e-mail]>
+#
+# This software may be used and distributed according to the terms of the
+# GNU General Public License version 2 or any later version.
+
+from __future__ import absolute_import
+
+from .node import (
+    nullid,
+)
+from . import (
+    setdiscovery,
+)
+
+def pull(pullop):
+    """Pull using wire protocol version 2."""
+    repo = pullop.repo
+    remote = pullop.remote
+
+    # Figure out what needs to be fetched.
+    common, fetch, remoteheads = _pullchangesetdiscovery(
+        repo, remote, pullop.heads, abortwhenunrelated=pullop.force)
+
+def _pullchangesetdiscovery(repo, remote, heads, abortwhenunrelated=True):
+    """Determine which changesets need to be pulled."""
+
+    if heads:
+        knownnode = repo.changelog.hasnode
+        if all(knownnode(head) for head in heads):
+            return heads, False, heads
+
+    # TODO wire protocol version 2 is capable of more efficient discovery
+    # than setdiscovery. Consider implementing something better.
+    common, fetch, remoteheads = setdiscovery.findcommonheads(
+        repo.ui, repo, remote, abortwhenunrelated=abortwhenunrelated)
+
+    common = set(common)
+    remoteheads = set(remoteheads)
+
+    # If a remote head is filtered locally, put it back in the common set.
+    # See the comment in exchange._pulldiscoverychangegroup() for more.
+
+    if fetch and remoteheads:
+        nodemap = repo.unfiltered().changelog.nodemap
+
+        common |= {head for head in remoteheads if head in nodemap}
+
+        if set(remoteheads).issubset(common):
+            fetch = []
+
+    common.discard(nullid)
+
+    return common, fetch, remoteheads

tests/test-wireproto-exchangev2.t

@@ -0,0 +1,53
+Tests for wire protocol version 2 exchange.
+Tests in this file should be folded into existing tests once protocol
+v2 has enough features that it can be enabled via #testcase in existing
+tests.
+
+  $ . $TESTDIR/wireprotohelpers.sh
+  $ enablehttpv2client
+
+  $ hg init server-simple
+  $ enablehttpv2 server-simple
+  $ cd server-simple
+  $ cat >> .hg/hgrc << EOF
+  > [phases]
+  > publish = false
+  > EOF
+  $ echo a0 > a
+  $ echo b0 > b
+  $ hg -q commit -A -m 'commit 0'
+
+  $ echo a1 > a
+  $ hg commit -m 'commit 1'
+  $ hg phase --public -r .
+  $ echo a2 > a
+  $ hg commit -m 'commit 2'
+
+  $ hg -q up -r 0
+  $ echo b1 > b
+  $ hg -q commit -m 'head 2 commit 1'
+  $ echo b2 > b
+  $ hg -q commit -m 'head 2 commit 2'
+
+  $ hg serve -p $HGPORT -d --pid-file hg.pid -E error.log
+  $ cat hg.pid > $DAEMON_PIDS
+
+  $ cd ..
+
+Test basic clone
+
+  $ hg --debug clone -U http://localhost:$HGPORT client-simple
+  using http://localhost:$HGPORT/
+  sending capabilities command
+  query 1; heads
+  sending 2 commands
+  sending command heads: {}
+  sending command known: {
+    'nodes': []
+  }
+  received frame(size=11; request=1; stream=2; streamflags=stream-begin; type=command-response; flags=continuation)
+  received frame(size=43; request=1; stream=2; streamflags=; type=command-response; flags=continuation)
+  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
+  received frame(size=11; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
+  received frame(size=1; request=3; stream=2; streamflags=; type=command-response; flags=continuation)
+  received frame(size=0; request=3; stream=2; streamflags=; type=command-response; flags=eos)

mercurial/exchange.py

@@ -1,2644 +1,2649
 # exchange.py - utility to exchange data between repos.
 #
 # Copyright 2005-2007 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 import collections
 import hashlib
 
 from .i18n import _
 from .node import (
     bin,
     hex,
     nullid,
     nullrev,
 )
 from .thirdparty import (
     attr,
 )
 from . import (
     bookmarks as bookmod,
     bundle2,
     changegroup,
     discovery,
     error,
+    exchangev2,
     lock as lockmod,
     logexchange,
     narrowspec,
     obsolete,
     phases,
     pushkey,
     pycompat,
     repository,
     scmutil,
     sslutil,
     streamclone,
     url as urlmod,
     util,
 )
 from .utils import (
     stringutil,
 )
 
 urlerr = util.urlerr
 urlreq = util.urlreq
 
 _NARROWACL_SECTION = 'narrowhgacl'
 
 # Maps bundle version human names to changegroup versions.
 _bundlespeccgversions = {'v1': '01',
                          'v2': '02',
                          'packed1': 's1',
                          'bundle2': '02', #legacy
                         }
 
 # Maps bundle version with content opts to choose which part to bundle
 _bundlespeccontentopts = {
     'v1': {
         'changegroup': True,
         'cg.version': '01',
         'obsolescence': False,
         'phases': False,
         'tagsfnodescache': False,
         'revbranchcache': False
     },
     'v2': {
         'changegroup': True,
         'cg.version': '02',
         'obsolescence': False,
         'phases': False,
         'tagsfnodescache': True,
         'revbranchcache': True
     },
     'packed1' : {
         'cg.version': 's1'
     }
 }
 _bundlespeccontentopts['bundle2'] = _bundlespeccontentopts['v2']
 
 _bundlespecvariants = {"streamv2": {"changegroup": False, "streamv2": True,
                                     "tagsfnodescache": False,
                                     "revbranchcache": False}}
 
 # Compression engines allowed in version 1. THIS SHOULD NEVER CHANGE.
 _bundlespecv1compengines = {'gzip', 'bzip2', 'none'}
 
 @attr.s
 class bundlespec(object):
     compression = attr.ib()
     wirecompression = attr.ib()
     version = attr.ib()
     wireversion = attr.ib()
     params = attr.ib()
     contentopts = attr.ib()
 
 def parsebundlespec(repo, spec, strict=True):
     """Parse a bundle string specification into parts.
 
     Bundle specifications denote a well-defined bundle/exchange format.
     The content of a given specification should not change over time in
     order to ensure that bundles produced by a newer version of Mercurial are
     readable from an older version.
 
     The string currently has the form:
 
        <compression>-<type>[;<parameter0>[;<parameter1>]]
 
     Where <compression> is one of the supported compression formats
     and <type> is (currently) a version string. A ";" can follow the type and
     all text afterwards is interpreted as URI encoded, ";" delimited key=value
     pairs.
 
     If ``strict`` is True (the default) <compression> is required. Otherwise,
     it is optional.
 
     Returns a bundlespec object of (compression, version, parameters).
     Compression will be ``None`` if not in strict mode and a compression isn't
     defined.
 
     An ``InvalidBundleSpecification`` is raised when the specification is
     not syntactically well formed.
 
     An ``UnsupportedBundleSpecification`` is raised when the compression or
     bundle type/version is not recognized.
 
     Note: this function will likely eventually return a more complex data
     structure, including bundle2 part information.
     """
     def parseparams(s):
         if ';' not in s:
             return s, {}
 
         params = {}
         version, paramstr = s.split(';', 1)
 
         for p in paramstr.split(';'):
             if '=' not in p:
                 raise error.InvalidBundleSpecification(
                     _('invalid bundle specification: '
                       'missing "=" in parameter: %s') % p)
 
             key, value = p.split('=', 1)
             key = urlreq.unquote(key)
             value = urlreq.unquote(value)
             params[key] = value
 
         return version, params
 
 
     if strict and '-' not in spec:
         raise error.InvalidBundleSpecification(
                 _('invalid bundle specification; '
                   'must be prefixed with compression: %s') % spec)
 
     if '-' in spec:
         compression, version = spec.split('-', 1)
 
         if compression not in util.compengines.supportedbundlenames:
             raise error.UnsupportedBundleSpecification(
                     _('%s compression is not supported') % compression)
 
         version, params = parseparams(version)
 
         if version not in _bundlespeccgversions:
             raise error.UnsupportedBundleSpecification(
                     _('%s is not a recognized bundle version') % version)
     else:
         # Value could be just the compression or just the version, in which
         # case some defaults are assumed (but only when not in strict mode).
         assert not strict
 
         spec, params = parseparams(spec)
 
         if spec in util.compengines.supportedbundlenames:
             compression = spec
             version = 'v1'
             # Generaldelta repos require v2.
             if 'generaldelta' in repo.requirements:
                 version = 'v2'
             # Modern compression engines require v2.
             if compression not in _bundlespecv1compengines:
                 version = 'v2'
         elif spec in _bundlespeccgversions:
             if spec == 'packed1':
                 compression = 'none'
             else:
                 compression = 'bzip2'
             version = spec
         else:
             raise error.UnsupportedBundleSpecification(
                     _('%s is not a recognized bundle specification') % spec)
 
     # Bundle version 1 only supports a known set of compression engines.
     if version == 'v1' and compression not in _bundlespecv1compengines:
         raise error.UnsupportedBundleSpecification(
             _('compression engine %s is not supported on v1 bundles') %
             compression)
 
     # The specification for packed1 can optionally declare the data formats
     # required to apply it. If we see this metadata, compare against what the
     # repo supports and error if the bundle isn't compatible.
     if version == 'packed1' and 'requirements' in params:
         requirements = set(params['requirements'].split(','))
         missingreqs = requirements - repo.supportedformats
         if missingreqs:
             raise error.UnsupportedBundleSpecification(
                     _('missing support for repository features: %s') %
                       ', '.join(sorted(missingreqs)))
 
     # Compute contentopts based on the version
     contentopts = _bundlespeccontentopts.get(version, {}).copy()
 
     # Process the variants
     if "stream" in params and params["stream"] == "v2":
         variant = _bundlespecvariants["streamv2"]
         contentopts.update(variant)
 
     engine = util.compengines.forbundlename(compression)
     compression, wirecompression = engine.bundletype()
     wireversion = _bundlespeccgversions[version]
 
     return bundlespec(compression, wirecompression, version, wireversion,
                       params, contentopts)
 
 def readbundle(ui, fh, fname, vfs=None):
     header = changegroup.readexactly(fh, 4)
 
     alg = None
     if not fname:
         fname = "stream"
         if not header.startswith('HG') and header.startswith('\0'):
             fh = changegroup.headerlessfixup(fh, header)
             header = "HG10"
             alg = 'UN'
     elif vfs:
         fname = vfs.join(fname)
 
     magic, version = header[0:2], header[2:4]
 
     if magic != 'HG':
         raise error.Abort(_('%s: not a Mercurial bundle') % fname)
     if version == '10':
         if alg is None:
             alg = changegroup.readexactly(fh, 2)
         return changegroup.cg1unpacker(fh, alg)
     elif version.startswith('2'):
         return bundle2.getunbundler(ui, fh, magicstring=magic + version)
     elif version == 'S1':
         return streamclone.streamcloneapplier(fh)
     else:
         raise error.Abort(_('%s: unknown bundle version %s') % (fname, version))
 
 def getbundlespec(ui, fh):
     """Infer the bundlespec from a bundle file handle.
 
     The input file handle is seeked and the original seek position is not
     restored.
     """
     def speccompression(alg):
         try:
             return util.compengines.forbundletype(alg).bundletype()[0]
         except KeyError:
             return None
 
     b = readbundle(ui, fh, None)
     if isinstance(b, changegroup.cg1unpacker):
         alg = b._type
         if alg == '_truncatedBZ':
             alg = 'BZ'
         comp = speccompression(alg)
         if not comp:
             raise error.Abort(_('unknown compression algorithm: %s') % alg)
         return '%s-v1' % comp
     elif isinstance(b, bundle2.unbundle20):
         if 'Compression' in b.params:
             comp = speccompression(b.params['Compression'])
             if not comp:
                 raise error.Abort(_('unknown compression algorithm: %s') % comp)
         else:
             comp = 'none'
 
         version = None
         for part in b.iterparts():
             if part.type == 'changegroup':
                 version = part.params['version']
                 if version in ('01', '02'):
                     version = 'v2'
                 else:
                     raise error.Abort(_('changegroup version %s does not have '
                                         'a known bundlespec') % version,
                                       hint=_('try upgrading your Mercurial '
                                               'client'))
             elif part.type == 'stream2' and version is None:
                 # A stream2 part requires to be part of a v2 bundle
                 version = "v2"
                 requirements = urlreq.unquote(part.params['requirements'])
                 splitted = requirements.split()
                 params = bundle2._formatrequirementsparams(splitted)
                 return 'none-v2;stream=v2;%s' % params
 
         if not version:
             raise error.Abort(_('could not identify changegroup version in '
                                 'bundle'))
 
         return '%s-%s' % (comp, version)
     elif isinstance(b, streamclone.streamcloneapplier):
         requirements = streamclone.readbundle1header(fh)[2]
         formatted = bundle2._formatrequirementsparams(requirements)
         return 'none-packed1;%s' % formatted
     else:
         raise error.Abort(_('unknown bundle type: %s') % b)
 
 def _computeoutgoing(repo, heads, common):
     """Computes which revs are outgoing given a set of common
     and a set of heads.
 
     This is a separate function so extensions can have access to
     the logic.
 
     Returns a discovery.outgoing object.
     """
     cl = repo.changelog
     if common:
         hasnode = cl.hasnode
         common = [n for n in common if hasnode(n)]
     else:
         common = [nullid]
     if not heads:
         heads = cl.heads()
     return discovery.outgoing(repo, common, heads)
 
 def _forcebundle1(op):
     """return true if a pull/push must use bundle1
 
     This function is used to allow testing of the older bundle version"""
     ui = op.repo.ui
     # The goal is this config is to allow developer to choose the bundle
     # version used during exchanged. This is especially handy during test.
     # Value is a list of bundle version to be picked from, highest version
     # should be used.
     #
     # developer config: devel.legacy.exchange
     exchange = ui.configlist('devel', 'legacy.exchange')
     forcebundle1 = 'bundle2' not in exchange and 'bundle1' in exchange
     return forcebundle1 or not op.remote.capable('bundle2')
 
 class pushoperation(object):
     """A object that represent a single push operation
 
     Its purpose is to carry push related state and very common operations.
 
     A new pushoperation should be created at the beginning of each push and
     discarded afterward.
     """
 
     def __init__(self, repo, remote, force=False, revs=None, newbranch=False,
                  bookmarks=(), pushvars=None):
         # repo we push from
         self.repo = repo
         self.ui = repo.ui
         # repo we push to
         self.remote = remote
         # force option provided
         self.force = force
         # revs to be pushed (None is "all")
         self.revs = revs
         # bookmark explicitly pushed
         self.bookmarks = bookmarks
         # allow push of new branch
         self.newbranch = newbranch
         # step already performed
         # (used to check what steps have been already performed through bundle2)
         self.stepsdone = set()
         # Integer version of the changegroup push result
         # - None means nothing to push
         # - 0 means HTTP error
         # - 1 means we pushed and remote head count is unchanged *or*
         #   we have outgoing changesets but refused to push
         # - other values as described by addchangegroup()
         self.cgresult = None
         # Boolean value for the bookmark push
         self.bkresult = None
         # discover.outgoing object (contains common and outgoing data)
         self.outgoing = None
         # all remote topological heads before the push
         self.remoteheads = None
         # Details of the remote branch pre and post push
         #
         # mapping: {'branch': ([remoteheads],
         #                      [newheads],
         #                      [unsyncedheads],
         #                      [discardedheads])}
         # - branch: the branch name
         # - remoteheads: the list of remote heads known locally
         #                None if the branch is new
         # - newheads: the new remote heads (known locally) with outgoing pushed
         # - unsyncedheads: the list of remote heads unknown locally.
         # - discardedheads: the list of remote heads made obsolete by the push
         self.pushbranchmap = None
         # testable as a boolean indicating if any nodes are missing locally.
         self.incoming = None
         # summary of the remote phase situation
         self.remotephases = None
         # phases changes that must be pushed along side the changesets
         self.outdatedphases = None
         # phases changes that must be pushed if changeset push fails
         self.fallbackoutdatedphases = None
         # outgoing obsmarkers
         self.outobsmarkers = set()
         # outgoing bookmarks
         self.outbookmarks = []
         # transaction manager
         self.trmanager = None
         # map { pushkey partid -> callback handling failure}
         # used to handle exception from mandatory pushkey part failure
         self.pkfailcb = {}
         # an iterable of pushvars or None
         self.pushvars = pushvars
 
     @util.propertycache
     def futureheads(self):
         """future remote heads if the changeset push succeeds"""
         return self.outgoing.missingheads
 
     @util.propertycache
     def fallbackheads(self):
         """future remote heads if the changeset push fails"""
         if self.revs is None:
             # not target to push, all common are relevant
             return self.outgoing.commonheads
         unfi = self.repo.unfiltered()
         # I want cheads = heads(::missingheads and ::commonheads)
         # (missingheads is revs with secret changeset filtered out)
         #
         # This can be expressed as:
         #     cheads = ( (missingheads and ::commonheads)
         #              + (commonheads and ::missingheads))"
         #              )
         #
         # while trying to push we already computed the following:
         #     common = (::commonheads)
         #     missing = ((commonheads::missingheads) - commonheads)
         #
         # We can pick:
         # * missingheads part of common (::commonheads)
         common = self.outgoing.common
         nm = self.repo.changelog.nodemap
         cheads = [node for node in self.revs if nm[node] in common]
         # and
         # * commonheads parents on missing
         revset = unfi.set('%ln and parents(roots(%ln))',
                          self.outgoing.commonheads,
                          self.outgoing.missing)
         cheads.extend(c.node() for c in revset)
         return cheads
 
     @property
     def commonheads(self):
         """set of all common heads after changeset bundle push"""
         if self.cgresult:
             return self.futureheads
         else:
             return self.fallbackheads
 
 # mapping of message used when pushing bookmark
 bookmsgmap = {'update': (_("updating bookmark %s\n"),
                          _('updating bookmark %s failed!\n')),
               'export': (_("exporting bookmark %s\n"),
                          _('exporting bookmark %s failed!\n')),
               'delete': (_("deleting remote bookmark %s\n"),
                          _('deleting remote bookmark %s failed!\n')),
               }
 
 
 def push(repo, remote, force=False, revs=None, newbranch=False, bookmarks=(),
          opargs=None):
     '''Push outgoing changesets (limited by revs) from a local
     repository to remote. Return an integer:
       - None means nothing to push
       - 0 means HTTP error
       - 1 means we pushed and remote head count is unchanged *or*
         we have outgoing changesets but refused to push
       - other values as described by addchangegroup()
     '''
     if opargs is None:
         opargs = {}
     pushop = pushoperation(repo, remote, force, revs, newbranch, bookmarks,
                            **pycompat.strkwargs(opargs))
     if pushop.remote.local():
         missing = (set(pushop.repo.requirements)
                    - pushop.remote.local().supported)
         if missing:
             msg = _("required features are not"
                     " supported in the destination:"
                     " %s") % (', '.join(sorted(missing)))
             raise error.Abort(msg)
 
     if not pushop.remote.canpush():
         raise error.Abort(_("destination does not support push"))
 
     if not pushop.remote.capable('unbundle'):
         raise error.Abort(_('cannot push: destination does not support the '
                             'unbundle wire protocol command'))
 
     # get lock as we might write phase data
     wlock = lock = None
     try:
         # bundle2 push may receive a reply bundle touching bookmarks or other
         # things requiring the wlock. Take it now to ensure proper ordering.
         maypushback = pushop.ui.configbool('experimental', 'bundle2.pushback')
         if (not _forcebundle1(pushop)) and maypushback:
             wlock = pushop.repo.wlock()
         lock = pushop.repo.lock()
         pushop.trmanager = transactionmanager(pushop.repo,
                                               'push-response',
                                               pushop.remote.url())
     except error.LockUnavailable as err:
         # source repo cannot be locked.
         # We do not abort the push, but just disable the local phase
         # synchronisation.
         msg = 'cannot lock source repository: %s\n' % err
         pushop.ui.debug(msg)
 
     with wlock or util.nullcontextmanager(), \
             lock or util.nullcontextmanager(), \
             pushop.trmanager or util.nullcontextmanager():
         pushop.repo.checkpush(pushop)
         _pushdiscovery(pushop)
         if not _forcebundle1(pushop):
             _pushbundle2(pushop)
         _pushchangeset(pushop)
         _pushsyncphase(pushop)
         _pushobsolete(pushop)
         _pushbookmark(pushop)
 
     if repo.ui.configbool('experimental', 'remotenames'):
         logexchange.pullremotenames(repo, remote)
 
     return pushop
 
 # list of steps to perform discovery before push
 pushdiscoveryorder = []
 
 # Mapping between step name and function
 #
 # This exists to help extensions wrap steps if necessary
 pushdiscoverymapping = {}
 
 def pushdiscovery(stepname):
     """decorator for function performing discovery before push
 
     The function is added to the step -> function mapping and appended to the
     list of steps.  Beware that decorated function will be added in order (this
     may matter).
 
     You can only use this decorator for a new step, if you want to wrap a step
     from an extension, change the pushdiscovery dictionary directly."""
     def dec(func):
         assert stepname not in pushdiscoverymapping
         pushdiscoverymapping[stepname] = func
         pushdiscoveryorder.append(stepname)
         return func
     return dec
 
 def _pushdiscovery(pushop):
     """Run all discovery steps"""
     for stepname in pushdiscoveryorder:
         step = pushdiscoverymapping[stepname]
         step(pushop)
 
 @pushdiscovery('changeset')
 def _pushdiscoverychangeset(pushop):
     """discover the changeset that need to be pushed"""
     fci = discovery.findcommonincoming
     if pushop.revs:
         commoninc = fci(pushop.repo, pushop.remote, force=pushop.force,
                         ancestorsof=pushop.revs)
     else:
         commoninc = fci(pushop.repo, pushop.remote, force=pushop.force)
     common, inc, remoteheads = commoninc
     fco = discovery.findcommonoutgoing
     outgoing = fco(pushop.repo, pushop.remote, onlyheads=pushop.revs,
                    commoninc=commoninc, force=pushop.force)
     pushop.outgoing = outgoing
     pushop.remoteheads = remoteheads
     pushop.incoming = inc
 
 @pushdiscovery('phase')
 def _pushdiscoveryphase(pushop):
     """discover the phase that needs to be pushed
 
     (computed for both success and failure case for changesets push)"""
     outgoing = pushop.outgoing
     unfi = pushop.repo.unfiltered()
     remotephases = listkeys(pushop.remote, 'phases')
 
     if (pushop.ui.configbool('ui', '_usedassubrepo')
         and remotephases    # server supports phases
         and not pushop.outgoing.missing # no changesets to be pushed
         and remotephases.get('publishing', False)):
         # When:
         # - this is a subrepo push
         # - and remote support phase
         # - and no changeset are to be pushed
         # - and remote is publishing
         # We may be in issue 3781 case!
         # We drop the possible phase synchronisation done by
         # courtesy to publish changesets possibly locally draft
         # on the remote.
         pushop.outdatedphases = []
         pushop.fallbackoutdatedphases = []
         return
 
     pushop.remotephases = phases.remotephasessummary(pushop.repo,
                                                      pushop.fallbackheads,
                                                      remotephases)
     droots = pushop.remotephases.draftroots
 
     extracond = ''
     if not pushop.remotephases.publishing:
         extracond = ' and public()'
     revset = 'heads((%%ln::%%ln) %s)' % extracond
     # Get the list of all revs draft on remote by public here.
     # XXX Beware that revset break if droots is not strictly
     # XXX root we may want to ensure it is but it is costly
     fallback = list(unfi.set(revset, droots, pushop.fallbackheads))
     if not outgoing.missing:
         future = fallback
     else:
         # adds changeset we are going to push as draft
         #
         # should not be necessary for publishing server, but because of an
         # issue fixed in xxxxx we have to do it anyway.
         fdroots = list(unfi.set('roots(%ln  + %ln::)',
                        outgoing.missing, droots))
         fdroots = [f.node() for f in fdroots]
         future = list(unfi.set(revset, fdroots, pushop.futureheads))
     pushop.outdatedphases = future
     pushop.fallbackoutdatedphases = fallback
 
 @pushdiscovery('obsmarker')
 def _pushdiscoveryobsmarkers(pushop):
     if not obsolete.isenabled(pushop.repo, obsolete.exchangeopt):
         return
 
     if not pushop.repo.obsstore:
         return
 
     if 'obsolete' not in listkeys(pushop.remote, 'namespaces'):
         return
 
     repo = pushop.repo
     # very naive computation, that can be quite expensive on big repo.
     # However: evolution is currently slow on them anyway.
     nodes = (c.node() for c in repo.set('::%ln', pushop.futureheads))
     pushop.outobsmarkers = pushop.repo.obsstore.relevantmarkers(nodes)
 
 @pushdiscovery('bookmarks')
 def _pushdiscoverybookmarks(pushop):
     ui = pushop.ui
     repo = pushop.repo.unfiltered()
     remote = pushop.remote
     ui.debug("checking for updated bookmarks\n")
     ancestors = ()
     if pushop.revs:
         revnums = pycompat.maplist(repo.changelog.rev, pushop.revs)
         ancestors = repo.changelog.ancestors(revnums, inclusive=True)
 
     remotebookmark = listkeys(remote, 'bookmarks')
 
     explicit = set([repo._bookmarks.expandname(bookmark)
                     for bookmark in pushop.bookmarks])
 
     remotebookmark = bookmod.unhexlifybookmarks(remotebookmark)
     comp = bookmod.comparebookmarks(repo, repo._bookmarks, remotebookmark)
 
     def safehex(x):
         if x is None:
             return x
         return hex(x)
 
     def hexifycompbookmarks(bookmarks):
         return [(b, safehex(scid), safehex(dcid))
                 for (b, scid, dcid) in bookmarks]
 
     comp = [hexifycompbookmarks(marks) for marks in comp]
     return _processcompared(pushop, ancestors, explicit, remotebookmark, comp)
 
 def _processcompared(pushop, pushed, explicit, remotebms, comp):
     """take decision on bookmark to pull from the remote bookmark
 
     Exist to help extensions who want to alter this behavior.
     """
     addsrc, adddst, advsrc, advdst, diverge, differ, invalid, same = comp
 
     repo = pushop.repo
 
     for b, scid, dcid in advsrc:
         if b in explicit:
             explicit.remove(b)
         if not pushed or repo[scid].rev() in pushed:
             pushop.outbookmarks.append((b, dcid, scid))
     # search added bookmark
     for b, scid, dcid in addsrc:
         if b in explicit:
             explicit.remove(b)
             pushop.outbookmarks.append((b, '', scid))
     # search for overwritten bookmark
     for b, scid, dcid in list(advdst) + list(diverge) + list(differ):
         if b in explicit:
             explicit.remove(b)
             pushop.outbookmarks.append((b, dcid, scid))
     # search for bookmark to delete
     for b, scid, dcid in adddst:
         if b in explicit:
             explicit.remove(b)
             # treat as "deleted locally"
             pushop.outbookmarks.append((b, dcid, ''))
     # identical bookmarks shouldn't get reported
     for b, scid, dcid in same:
         if b in explicit:
             explicit.remove(b)
 
     if explicit:
         explicit = sorted(explicit)
         # we should probably list all of them
         pushop.ui.warn(_('bookmark %s does not exist on the local '
                          'or remote repository!\n') % explicit[0])
         pushop.bkresult = 2
 
     pushop.outbookmarks.sort()
 
 def _pushcheckoutgoing(pushop):
     outgoing = pushop.outgoing
     unfi = pushop.repo.unfiltered()
     if not outgoing.missing:
         # nothing to push
         scmutil.nochangesfound(unfi.ui, unfi, outgoing.excluded)
         return False
     # something to push
     if not pushop.force:
         # if repo.obsstore == False --> no obsolete
         # then, save the iteration
         if unfi.obsstore:
             # this message are here for 80 char limit reason
             mso = _("push includes obsolete changeset: %s!")
             mspd = _("push includes phase-divergent changeset: %s!")
             mscd = _("push includes content-divergent changeset: %s!")
             mst = {"orphan": _("push includes orphan changeset: %s!"),
                    "phase-divergent": mspd,
                    "content-divergent": mscd}
             # If we are to push if there is at least one
             # obsolete or unstable changeset in missing, at
             # least one of the missinghead will be obsolete or
             # unstable. So checking heads only is ok
             for node in outgoing.missingheads:
                 ctx = unfi[node]
                 if ctx.obsolete():
                     raise error.Abort(mso % ctx)
                 elif ctx.isunstable():
                     # TODO print more than one instability in the abort
                     # message
                     raise error.Abort(mst[ctx.instabilities()[0]] % ctx)
 
         discovery.checkheads(pushop)
     return True
 
 # List of names of steps to perform for an outgoing bundle2, order matters.
 b2partsgenorder = []
 
 # Mapping between step name and function
 #
 # This exists to help extensions wrap steps if necessary
 b2partsgenmapping = {}
 
 def b2partsgenerator(stepname, idx=None):
     """decorator for function generating bundle2 part
 
     The function is added to the step -> function mapping and appended to the
     list of steps.  Beware that decorated functions will be added in order
     (this may matter).
 
     You can only use this decorator for new steps, if you want to wrap a step
     from an extension, attack the b2partsgenmapping dictionary directly."""
     def dec(func):
         assert stepname not in b2partsgenmapping
         b2partsgenmapping[stepname] = func
         if idx is None:
             b2partsgenorder.append(stepname)
         else:
             b2partsgenorder.insert(idx, stepname)
         return func
     return dec
 
 def _pushb2ctxcheckheads(pushop, bundler):
     """Generate race condition checking parts
 
     Exists as an independent function to aid extensions
     """
     # * 'force' do not check for push race,
     # * if we don't push anything, there are nothing to check.
     if not pushop.force and pushop.outgoing.missingheads:
         allowunrelated = 'related' in bundler.capabilities.get('checkheads', ())
         emptyremote = pushop.pushbranchmap is None
         if not allowunrelated or emptyremote:
             bundler.newpart('check:heads', data=iter(pushop.remoteheads))
         else:
             affected = set()
             for branch, heads in pushop.pushbranchmap.iteritems():
                 remoteheads, newheads, unsyncedheads, discardedheads = heads
                 if remoteheads is not None:
                     remote = set(remoteheads)
                     affected |= set(discardedheads) & remote
                     affected |= remote - set(newheads)
             if affected:
                 data = iter(sorted(affected))
                 bundler.newpart('check:updated-heads', data=data)
 
 def _pushing(pushop):
     """return True if we are pushing anything"""
     return bool(pushop.outgoing.missing
                 or pushop.outdatedphases
                 or pushop.outobsmarkers
                 or pushop.outbookmarks)
 
 @b2partsgenerator('check-bookmarks')
 def _pushb2checkbookmarks(pushop, bundler):
     """insert bookmark move checking"""
     if not _pushing(pushop) or pushop.force:
         return
     b2caps = bundle2.bundle2caps(pushop.remote)
     hasbookmarkcheck = 'bookmarks' in b2caps
     if not (pushop.outbookmarks and hasbookmarkcheck):
         return
     data = []
     for book, old, new in pushop.outbookmarks:
         old = bin(old)
         data.append((book, old))
     checkdata = bookmod.binaryencode(data)
     bundler.newpart('check:bookmarks', data=checkdata)
 
 @b2partsgenerator('check-phases')
 def _pushb2checkphases(pushop, bundler):
     """insert phase move checking"""
     if not _pushing(pushop) or pushop.force:
         return
     b2caps = bundle2.bundle2caps(pushop.remote)
     hasphaseheads = 'heads' in b2caps.get('phases', ())
     if pushop.remotephases is not None and hasphaseheads:
         # check that the remote phase has not changed
         checks = [[] for p in phases.allphases]
         checks[phases.public].extend(pushop.remotephases.publicheads)
         checks[phases.draft].extend(pushop.remotephases.draftroots)
         if any(checks):
             for nodes in checks:
                 nodes.sort()
             checkdata = phases.binaryencode(checks)
             bundler.newpart('check:phases', data=checkdata)
 
 @b2partsgenerator('changeset')
 def _pushb2ctx(pushop, bundler):
     """handle changegroup push through bundle2
 
     addchangegroup result is stored in the ``pushop.cgresult`` attribute.
     """
     if 'changesets' in pushop.stepsdone:
         return
     pushop.stepsdone.add('changesets')
     # Send known heads to the server for race detection.
     if not _pushcheckoutgoing(pushop):
         return
     pushop.repo.prepushoutgoinghooks(pushop)
 
     _pushb2ctxcheckheads(pushop, bundler)
 
     b2caps = bundle2.bundle2caps(pushop.remote)
     version = '01'
     cgversions = b2caps.get('changegroup')
     if cgversions:  # 3.1 and 3.2 ship with an empty value
         cgversions = [v for v in cgversions
                       if v in changegroup.supportedoutgoingversions(
                           pushop.repo)]
         if not cgversions:
             raise ValueError(_('no common changegroup version'))
         version = max(cgversions)
     cgstream = changegroup.makestream(pushop.repo, pushop.outgoing, version,
                                       'push')
     cgpart = bundler.newpart('changegroup', data=cgstream)
     if cgversions:
         cgpart.addparam('version', version)
     if 'treemanifest' in pushop.repo.requirements:
         cgpart.addparam('treemanifest', '1')
     def handlereply(op):
         """extract addchangegroup returns from server reply"""
         cgreplies = op.records.getreplies(cgpart.id)
         assert len(cgreplies['changegroup']) == 1
         pushop.cgresult = cgreplies['changegroup'][0]['return']
     return handlereply
 
 @b2partsgenerator('phase')
 def _pushb2phases(pushop, bundler):
     """handle phase push through bundle2"""
     if 'phases' in pushop.stepsdone:
         return
     b2caps = bundle2.bundle2caps(pushop.remote)
     ui = pushop.repo.ui
 
     legacyphase = 'phases' in ui.configlist('devel', 'legacy.exchange')
     haspushkey = 'pushkey' in b2caps
     hasphaseheads = 'heads' in b2caps.get('phases', ())
 
     if hasphaseheads and not legacyphase:
         return _pushb2phaseheads(pushop, bundler)
     elif haspushkey:
         return _pushb2phasespushkey(pushop, bundler)
 
 def _pushb2phaseheads(pushop, bundler):
     """push phase information through a bundle2 - binary part"""
     pushop.stepsdone.add('phases')
     if pushop.outdatedphases:
         updates = [[] for p in phases.allphases]
         updates[0].extend(h.node() for h in pushop.outdatedphases)
         phasedata = phases.binaryencode(updates)
         bundler.newpart('phase-heads', data=phasedata)
 
 def _pushb2phasespushkey(pushop, bundler):
     """push phase information through a bundle2 - pushkey part"""
     pushop.stepsdone.add('phases')
     part2node = []
 
     def handlefailure(pushop, exc):
         targetid = int(exc.partid)
         for partid, node in part2node:
             if partid == targetid:
                 raise error.Abort(_('updating %s to public failed') % node)
 
     enc = pushkey.encode
     for newremotehead in pushop.outdatedphases:
         part = bundler.newpart('pushkey')
         part.addparam('namespace', enc('phases'))
         part.addparam('key', enc(newremotehead.hex()))
         part.addparam('old', enc('%d' % phases.draft))
         part.addparam('new', enc('%d' % phases.public))
         part2node.append((part.id, newremotehead))
         pushop.pkfailcb[part.id] = handlefailure
 
     def handlereply(op):
         for partid, node in part2node:
             partrep = op.records.getreplies(partid)
             results = partrep['pushkey']
             assert len(results) <= 1
             msg = None
             if not results:
                 msg = _('server ignored update of %s to public!\n') % node
             elif not int(results[0]['return']):
                 msg = _('updating %s to public failed!\n') % node
             if msg is not None:
                 pushop.ui.warn(msg)
     return handlereply
 
 @b2partsgenerator('obsmarkers')
 def _pushb2obsmarkers(pushop, bundler):
     if 'obsmarkers' in pushop.stepsdone:
         return
     remoteversions = bundle2.obsmarkersversion(bundler.capabilities)
     if obsolete.commonversion(remoteversions) is None:
         return
     pushop.stepsdone.add('obsmarkers')
     if pushop.outobsmarkers:
         markers = sorted(pushop.outobsmarkers)
         bundle2.buildobsmarkerspart(bundler, markers)
 
 @b2partsgenerator('bookmarks')
 def _pushb2bookmarks(pushop, bundler):
     """handle bookmark push through bundle2"""
     if 'bookmarks' in pushop.stepsdone:
         return
     b2caps = bundle2.bundle2caps(pushop.remote)
 
     legacy = pushop.repo.ui.configlist('devel', 'legacy.exchange')
     legacybooks = 'bookmarks' in legacy
 
     if not legacybooks and 'bookmarks' in b2caps:
         return _pushb2bookmarkspart(pushop, bundler)
     elif 'pushkey' in b2caps:
         return _pushb2bookmarkspushkey(pushop, bundler)
 
 def _bmaction(old, new):
     """small utility for bookmark pushing"""
     if not old:
         return 'export'
     elif not new:
         return 'delete'
     return 'update'
 
 def _pushb2bookmarkspart(pushop, bundler):
     pushop.stepsdone.add('bookmarks')
     if not pushop.outbookmarks:
         return
 
     allactions = []
     data = []
     for book, old, new in pushop.outbookmarks:
         new = bin(new)
         data.append((book, new))
         allactions.append((book, _bmaction(old, new)))
     checkdata = bookmod.binaryencode(data)
     bundler.newpart('bookmarks', data=checkdata)
 
     def handlereply(op):
         ui = pushop.ui
         # if success
         for book, action in allactions:
             ui.status(bookmsgmap[action][0] % book)
 
     return handlereply
 
 def _pushb2bookmarkspushkey(pushop, bundler):
     pushop.stepsdone.add('bookmarks')
     part2book = []
     enc = pushkey.encode
 
     def handlefailure(pushop, exc):
         targetid = int(exc.partid)
         for partid, book, action in part2book:
             if partid == targetid:
                 raise error.Abort(bookmsgmap[action][1].rstrip() % book)
         # we should not be called for part we did not generated
         assert False
 
     for book, old, new in pushop.outbookmarks:
         part = bundler.newpart('pushkey')
         part.addparam('namespace', enc('bookmarks'))
         part.addparam('key', enc(book))
         part.addparam('old', enc(old))
         part.addparam('new', enc(new))
         action = 'update'
         if not old:
             action = 'export'
         elif not new:
             action = 'delete'
         part2book.append((part.id, book, action))
         pushop.pkfailcb[part.id] = handlefailure
 
     def handlereply(op):
         ui = pushop.ui
         for partid, book, action in part2book:
             partrep = op.records.getreplies(partid)
             results = partrep['pushkey']
             assert len(results) <= 1
             if not results:
                 pushop.ui.warn(_('server ignored bookmark %s update\n') % book)
             else:
                 ret = int(results[0]['return'])
                 if ret:
                     ui.status(bookmsgmap[action][0] % book)
                 else:
                     ui.warn(bookmsgmap[action][1] % book)
                     if pushop.bkresult is not None:
                         pushop.bkresult = 1
     return handlereply
 
 @b2partsgenerator('pushvars', idx=0)
 def _getbundlesendvars(pushop, bundler):
     '''send shellvars via bundle2'''
     pushvars = pushop.pushvars
     if pushvars:
         shellvars = {}
         for raw in pushvars:
             if '=' not in raw:
                 msg = ("unable to parse variable '%s', should follow "
                         "'KEY=VALUE' or 'KEY=' format")
                 raise error.Abort(msg % raw)
             k, v = raw.split('=', 1)
             shellvars[k] = v
 
         part = bundler.newpart('pushvars')
 
         for key, value in shellvars.iteritems():
             part.addparam(key, value, mandatory=False)
 
 def _pushbundle2(pushop):
     """push data to the remote using bundle2
 
     The only currently supported type of data is changegroup but this will
     evolve in the future."""
     bundler = bundle2.bundle20(pushop.ui, bundle2.bundle2caps(pushop.remote))
     pushback = (pushop.trmanager
                 and pushop.ui.configbool('experimental', 'bundle2.pushback'))
 
     # create reply capability
     capsblob = bundle2.encodecaps(bundle2.getrepocaps(pushop.repo,
                                                       allowpushback=pushback,
                                                       role='client'))
     bundler.newpart('replycaps', data=capsblob)
     replyhandlers = []
     for partgenname in b2partsgenorder:
         partgen = b2partsgenmapping[partgenname]
         ret = partgen(pushop, bundler)
         if callable(ret):
             replyhandlers.append(ret)
     # do not push if nothing to push
     if bundler.nbparts <= 1:
         return
     stream = util.chunkbuffer(bundler.getchunks())
     try:
         try:
             with pushop.remote.commandexecutor() as e:
                 reply = e.callcommand('unbundle', {
                     'bundle': stream,
                     'heads': ['force'],
                     'url': pushop.remote.url(),
                 }).result()
         except error.BundleValueError as exc:
             raise error.Abort(_('missing support for %s') % exc)
         try:
             trgetter = None
             if pushback:
                 trgetter = pushop.trmanager.transaction
             op = bundle2.processbundle(pushop.repo, reply, trgetter)
         except error.BundleValueError as exc:
             raise error.Abort(_('missing support for %s') % exc)
         except bundle2.AbortFromPart as exc:
             pushop.ui.status(_('remote: %s\n') % exc)
             if exc.hint is not None:
                 pushop.ui.status(_('remote: %s\n') % ('(%s)' % exc.hint))
             raise error.Abort(_('push failed on remote'))
     except error.PushkeyFailed as exc:
         partid = int(exc.partid)
         if partid not in pushop.pkfailcb:
             raise
         pushop.pkfailcb[partid](pushop, exc)
     for rephand in replyhandlers:
         rephand(op)
 
 def _pushchangeset(pushop):
     """Make the actual push of changeset bundle to remote repo"""
     if 'changesets' in pushop.stepsdone:
         return
     pushop.stepsdone.add('changesets')
     if not _pushcheckoutgoing(pushop):
         return
 
     # Should have verified this in push().
     assert pushop.remote.capable('unbundle')
 
     pushop.repo.prepushoutgoinghooks(pushop)
     outgoing = pushop.outgoing
     # TODO: get bundlecaps from remote
     bundlecaps = None
     # create a changegroup from local
     if pushop.revs is None and not (outgoing.excluded
                             or pushop.repo.changelog.filteredrevs):
         # push everything,
         # use the fast path, no race possible on push
         cg = changegroup.makechangegroup(pushop.repo, outgoing, '01', 'push',
                 fastpath=True, bundlecaps=bundlecaps)
     else:
         cg = changegroup.makechangegroup(pushop.repo, outgoing, '01',
                                         'push', bundlecaps=bundlecaps)
 
     # apply changegroup to remote
     # local repo finds heads on server, finds out what
     # revs it must push. once revs transferred, if server
     # finds it has different heads (someone else won
     # commit/push race), server aborts.
     if pushop.force:
         remoteheads = ['force']
     else:
         remoteheads = pushop.remoteheads
     # ssh: return remote's addchangegroup()
     # http: return remote's addchangegroup() or 0 for error
     pushop.cgresult = pushop.remote.unbundle(cg, remoteheads,
                                         pushop.repo.url())
 
 def _pushsyncphase(pushop):
     """synchronise phase information locally and remotely"""
     cheads = pushop.commonheads
     # even when we don't push, exchanging phase data is useful
     remotephases = listkeys(pushop.remote, 'phases')
     if (pushop.ui.configbool('ui', '_usedassubrepo')
         and remotephases    # server supports phases
         and pushop.cgresult is None # nothing was pushed
         and remotephases.get('publishing', False)):
         # When:
         # - this is a subrepo push
         # - and remote support phase
         # - and no changeset was pushed
         # - and remote is publishing
         # We may be in issue 3871 case!
         # We drop the possible phase synchronisation done by
         # courtesy to publish changesets possibly locally draft
         # on the remote.
         remotephases = {'publishing': 'True'}
     if not remotephases: # old server or public only reply from non-publishing
         _localphasemove(pushop, cheads)
         # don't push any phase data as there is nothing to push
     else:
         ana = phases.analyzeremotephases(pushop.repo, cheads,
                                          remotephases)
         pheads, droots = ana
         ### Apply remote phase on local
         if remotephases.get('publishing', False):
             _localphasemove(pushop, cheads)
         else: # publish = False
             _localphasemove(pushop, pheads)
             _localphasemove(pushop, cheads, phases.draft)
         ### Apply local phase on remote
 
         if pushop.cgresult:
             if 'phases' in pushop.stepsdone:
                 # phases already pushed though bundle2
                 return
             outdated = pushop.outdatedphases
         else:
             outdated = pushop.fallbackoutdatedphases
 
         pushop.stepsdone.add('phases')
 
         # filter heads already turned public by the push
         outdated = [c for c in outdated if c.node() not in pheads]
         # fallback to independent pushkey command
         for newremotehead in outdated:
             with pushop.remote.commandexecutor() as e:
                 r = e.callcommand('pushkey', {
                     'namespace': 'phases',
                     'key': newremotehead.hex(),
                     'old': '%d' % phases.draft,
                     'new': '%d' % phases.public
                 }).result()
 
             if not r:
                 pushop.ui.warn(_('updating %s to public failed!\n')
                                % newremotehead)
 
 def _localphasemove(pushop, nodes, phase=phases.public):
     """move <nodes> to <phase> in the local source repo"""
     if pushop.trmanager:
         phases.advanceboundary(pushop.repo,
                                pushop.trmanager.transaction(),
                                phase,
                                nodes)
     else:
         # repo is not locked, do not change any phases!
         # Informs the user that phases should have been moved when
         # applicable.
         actualmoves = [n for n in nodes if phase < pushop.repo[n].phase()]
         phasestr = phases.phasenames[phase]
         if actualmoves:
             pushop.ui.status(_('cannot lock source repo, skipping '
                                'local %s phase update\n') % phasestr)
 
 def _pushobsolete(pushop):
     """utility function to push obsolete markers to a remote"""
     if 'obsmarkers' in pushop.stepsdone:
         return
     repo = pushop.repo
     remote = pushop.remote
     pushop.stepsdone.add('obsmarkers')
     if pushop.outobsmarkers:
         pushop.ui.debug('try to push obsolete markers to remote\n')
         rslts = []
         remotedata = obsolete._pushkeyescape(sorted(pushop.outobsmarkers))
         for key in sorted(remotedata, reverse=True):
             # reverse sort to ensure we end with dump0
             data = remotedata[key]
             rslts.append(remote.pushkey('obsolete', key, '', data))
         if [r for r in rslts if not r]:
             msg = _('failed to push some obsolete markers!\n')
             repo.ui.warn(msg)
 
 def _pushbookmark(pushop):
     """Update bookmark position on remote"""
     if pushop.cgresult == 0 or 'bookmarks' in pushop.stepsdone:
         return
     pushop.stepsdone.add('bookmarks')
     ui = pushop.ui
     remote = pushop.remote
 
     for b, old, new in pushop.outbookmarks:
         action = 'update'
         if not old:
             action = 'export'
         elif not new:
             action = 'delete'
 
         with remote.commandexecutor() as e:
             r = e.callcommand('pushkey', {
                 'namespace': 'bookmarks',
                 'key': b,
                 'old': old,
                 'new': new,
             }).result()
 
         if r:
             ui.status(bookmsgmap[action][0] % b)
         else:
             ui.warn(bookmsgmap[action][1] % b)
             # discovery can have set the value form invalid entry
             if pushop.bkresult is not None:
                 pushop.bkresult = 1
 
 class pulloperation(object):
     """A object that represent a single pull operation
 
     It purpose is to carry pull related state and very common operation.
 
     A new should be created at the beginning of each pull and discarded
     afterward.
     """
 
     def __init__(self, repo, remote, heads=None, force=False, bookmarks=(),
                  remotebookmarks=None, streamclonerequested=None,
                  includepats=None, excludepats=None):
         # repo we pull into
         self.repo = repo
         # repo we pull from
         self.remote = remote
         # revision we try to pull (None is "all")
         self.heads = heads
         # bookmark pulled explicitly
         self.explicitbookmarks = [repo._bookmarks.expandname(bookmark)
                                   for bookmark in bookmarks]
         # do we force pull?
         self.force = force
         # whether a streaming clone was requested
         self.streamclonerequested = streamclonerequested
         # transaction manager
         self.trmanager = None
         # set of common changeset between local and remote before pull
         self.common = None
         # set of pulled head
         self.rheads = None
         # list of missing changeset to fetch remotely
         self.fetch = None
         # remote bookmarks data
         self.remotebookmarks = remotebookmarks
         # result of changegroup pulling (used as return code by pull)
         self.cgresult = None
         # list of step already done
         self.stepsdone = set()
         # Whether we attempted a clone from pre-generated bundles.
         self.clonebundleattempted = False
         # Set of file patterns to include.
         self.includepats = includepats
         # Set of file patterns to exclude.
         self.excludepats = excludepats
 
     @util.propertycache
     def pulledsubset(self):
         """heads of the set of changeset target by the pull"""
         # compute target subset
         if self.heads is None:
             # We pulled every thing possible
             # sync on everything common
             c = set(self.common)
             ret = list(self.common)
             for n in self.rheads:
                 if n not in c:
                     ret.append(n)
             return ret
         else:
             # We pulled a specific subset
             # sync on this subset
             return self.heads
 
     @util.propertycache
     def canusebundle2(self):
         return not _forcebundle1(self)
 
     @util.propertycache
     def remotebundle2caps(self):
         return bundle2.bundle2caps(self.remote)
 
     def gettransaction(self):
         # deprecated; talk to trmanager directly
         return self.trmanager.transaction()
 
 class transactionmanager(util.transactional):
     """An object to manage the life cycle of a transaction
 
     It creates the transaction on demand and calls the appropriate hooks when
     closing the transaction."""
     def __init__(self, repo, source, url):
         self.repo = repo
         self.source = source
         self.url = url
         self._tr = None
 
     def transaction(self):
         """Return an open transaction object, constructing if necessary"""
         if not self._tr:
             trname = '%s\n%s' % (self.source, util.hidepassword(self.url))
             self._tr = self.repo.transaction(trname)
             self._tr.hookargs['source'] = self.source
             self._tr.hookargs['url'] = self.url
         return self._tr
 
     def close(self):
         """close transaction if created"""
         if self._tr is not None:
             self._tr.close()
 
     def release(self):
         """release transaction if created"""
         if self._tr is not None:
             self._tr.release()
 
 def listkeys(remote, namespace):
     with remote.commandexecutor() as e:
         return e.callcommand('listkeys', {'namespace': namespace}).result()
 
 def _fullpullbundle2(repo, pullop):
     # The server may send a partial reply, i.e. when inlining
     # pre-computed bundles. In that case, update the common
     # set based on the results and pull another bundle.
     #
     # There are two indicators that the process is finished:
     # - no changeset has been added, or
     # - all remote heads are known locally.
     # The head check must use the unfiltered view as obsoletion
     # markers can hide heads.
     unfi = repo.unfiltered()
     unficl = unfi.changelog
     def headsofdiff(h1, h2):
         """Returns heads(h1 % h2)"""
         res = unfi.set('heads(%ln %% %ln)', h1, h2)
         return set(ctx.node() for ctx in res)
     def headsofunion(h1, h2):
         """Returns heads((h1 + h2) - null)"""
         res = unfi.set('heads((%ln + %ln - null))', h1, h2)
         return set(ctx.node() for ctx in res)
     while True:
         old_heads = unficl.heads()
         clstart = len(unficl)
         _pullbundle2(pullop)
         if repository.NARROW_REQUIREMENT in repo.requirements:
             # XXX narrow clones filter the heads on the server side during
             # XXX getbundle and result in partial replies as well.
             # XXX Disable pull bundles in this case as band aid to avoid
             # XXX extra round trips.
             break
         if clstart == len(unficl):
             break
         if all(unficl.hasnode(n) for n in pullop.rheads):
             break
         new_heads = headsofdiff(unficl.heads(), old_heads)
         pullop.common = headsofunion(new_heads, pullop.common)
         pullop.rheads = set(pullop.rheads) - pullop.common
 
 def pull(repo, remote, heads=None, force=False, bookmarks=(), opargs=None,
          streamclonerequested=None, includepats=None, excludepats=None):
     """Fetch repository data from a remote.
 
     This is the main function used to retrieve data from a remote repository.
 
     ``repo`` is the local repository to clone into.
     ``remote`` is a peer instance.
     ``heads`` is an iterable of revisions we want to pull. ``None`` (the
     default) means to pull everything from the remote.
     ``bookmarks`` is an iterable of bookmarks requesting to be pulled. By
     default, all remote bookmarks are pulled.
     ``opargs`` are additional keyword arguments to pass to ``pulloperation``
     initialization.
     ``streamclonerequested`` is a boolean indicating whether a "streaming
     clone" is requested. A "streaming clone" is essentially a raw file copy
     of revlogs from the server. This only works when the local repository is
     empty. The default value of ``None`` means to respect the server
     configuration for preferring stream clones.
     ``includepats`` and ``excludepats`` define explicit file patterns to
     include and exclude in storage, respectively. If not defined, narrow
     patterns from the repo instance are used, if available.
 
     Returns the ``pulloperation`` created for this pull.
     """
     if opargs is None:
         opargs = {}
 
     # We allow the narrow patterns to be passed in explicitly to provide more
     # flexibility for API consumers.
     if includepats or excludepats:
         includepats = includepats or set()
         excludepats = excludepats or set()
     else:
         includepats, excludepats = repo.narrowpats
 
     narrowspec.validatepatterns(includepats)
     narrowspec.validatepatterns(excludepats)
 
     pullop = pulloperation(repo, remote, heads, force, bookmarks=bookmarks,
                            streamclonerequested=streamclonerequested,
                            includepats=includepats, excludepats=excludepats,
                            **pycompat.strkwargs(opargs))
 
     peerlocal = pullop.remote.local()
     if peerlocal:
         missing = set(peerlocal.requirements) - pullop.repo.supported
         if missing:
             msg = _("required features are not"
                     " supported in the destination:"
                     " %s") % (', '.join(sorted(missing)))
             raise error.Abort(msg)
 
     pullop.trmanager = transactionmanager(repo, 'pull', remote.url())
     with repo.wlock(), repo.lock(), pullop.trmanager:
+        # Use the modern wire protocol, if available.
+        if remote.capable('exchangev2'):
+            exchangev2.pull(pullop)
+        else:
         # This should ideally be in _pullbundle2(). However, it needs to run
         # before discovery to avoid extra work.
         _maybeapplyclonebundle(pullop)
         streamclone.maybeperformlegacystreamclone(pullop)
         _pulldiscovery(pullop)
         if pullop.canusebundle2:
             _fullpullbundle2(repo, pullop)
         _pullchangeset(pullop)
         _pullphase(pullop)
         _pullbookmarks(pullop)
         _pullobsolete(pullop)
 
     # storing remotenames
     if repo.ui.configbool('experimental', 'remotenames'):
         logexchange.pullremotenames(repo, remote)
 
     return pullop
 
 # list of steps to perform discovery before pull
 pulldiscoveryorder = []
 
 # Mapping between step name and function
 #
 # This exists to help extensions wrap steps if necessary
 pulldiscoverymapping = {}
 
 def pulldiscovery(stepname):
     """decorator for function performing discovery before pull
 
     The function is added to the step -> function mapping and appended to the
     list of steps.  Beware that decorated function will be added in order (this
     may matter).
 
     You can only use this decorator for a new step, if you want to wrap a step
     from an extension, change the pulldiscovery dictionary directly."""
     def dec(func):
         assert stepname not in pulldiscoverymapping
         pulldiscoverymapping[stepname] = func
         pulldiscoveryorder.append(stepname)
         return func
     return dec
 
 def _pulldiscovery(pullop):
     """Run all discovery steps"""
     for stepname in pulldiscoveryorder:
         step = pulldiscoverymapping[stepname]
         step(pullop)
 
 @pulldiscovery('b1:bookmarks')
 def _pullbookmarkbundle1(pullop):
     """fetch bookmark data in bundle1 case
 
     If not using bundle2, we have to fetch bookmarks before changeset
     discovery to reduce the chance and impact of race conditions."""
     if pullop.remotebookmarks is not None:
         return
     if pullop.canusebundle2 and 'listkeys' in pullop.remotebundle2caps:
         # all known bundle2 servers now support listkeys, but lets be nice with
         # new implementation.
         return
     books = listkeys(pullop.remote, 'bookmarks')
     pullop.remotebookmarks = bookmod.unhexlifybookmarks(books)
 
 
 @pulldiscovery('changegroup')
 def _pulldiscoverychangegroup(pullop):
     """discovery phase for the pull
 
     Current handle changeset discovery only, will change handle all discovery
     at some point."""
     tmp = discovery.findcommonincoming(pullop.repo,
                                        pullop.remote,
                                        heads=pullop.heads,
                                        force=pullop.force)
     common, fetch, rheads = tmp
     nm = pullop.repo.unfiltered().changelog.nodemap
     if fetch and rheads:
         # If a remote heads is filtered locally, put in back in common.
         #
         # This is a hackish solution to catch most of "common but locally
         # hidden situation".  We do not performs discovery on unfiltered
         # repository because it end up doing a pathological amount of round
         # trip for w huge amount of changeset we do not care about.
         #
         # If a set of such "common but filtered" changeset exist on the server
         # but are not including a remote heads, we'll not be able to detect it,
         scommon = set(common)
         for n in rheads:
             if n in nm:
                 if n not in scommon:
                     common.append(n)
         if set(rheads).issubset(set(common)):
             fetch = []
     pullop.common = common
     pullop.fetch = fetch
     pullop.rheads = rheads
 
 def _pullbundle2(pullop):
     """pull data using bundle2
 
     For now, the only supported data are changegroup."""
     kwargs = {'bundlecaps': caps20to10(pullop.repo, role='client')}
 
     # make ui easier to access
     ui = pullop.repo.ui
 
     # At the moment we don't do stream clones over bundle2. If that is
     # implemented then here's where the check for that will go.
     streaming = streamclone.canperformstreamclone(pullop, bundle2=True)[0]
 
     # declare pull perimeters
     kwargs['common'] = pullop.common
     kwargs['heads'] = pullop.heads or pullop.rheads
 
     if streaming:
         kwargs['cg'] = False
         kwargs['stream'] = True
         pullop.stepsdone.add('changegroup')
         pullop.stepsdone.add('phases')
 
     else:
         # pulling changegroup
         pullop.stepsdone.add('changegroup')
 
         kwargs['cg'] = pullop.fetch
 
         legacyphase = 'phases' in ui.configlist('devel', 'legacy.exchange')
         hasbinaryphase = 'heads' in pullop.remotebundle2caps.get('phases', ())
         if (not legacyphase and hasbinaryphase):
             kwargs['phases'] = True
             pullop.stepsdone.add('phases')
 
         if 'listkeys' in pullop.remotebundle2caps:
             if 'phases' not in pullop.stepsdone:
                 kwargs['listkeys'] = ['phases']
 
     bookmarksrequested = False
     legacybookmark = 'bookmarks' in ui.configlist('devel', 'legacy.exchange')
     hasbinarybook = 'bookmarks' in pullop.remotebundle2caps
 
     if pullop.remotebookmarks is not None:
         pullop.stepsdone.add('request-bookmarks')
 
     if ('request-bookmarks' not in pullop.stepsdone
         and pullop.remotebookmarks is None
         and not legacybookmark and hasbinarybook):
         kwargs['bookmarks'] = True
         bookmarksrequested = True
 
     if 'listkeys' in pullop.remotebundle2caps:
         if 'request-bookmarks' not in pullop.stepsdone:
             # make sure to always includes bookmark data when migrating
             # `hg incoming --bundle` to using this function.
             pullop.stepsdone.add('request-bookmarks')
             kwargs.setdefault('listkeys', []).append('bookmarks')
 
     # If this is a full pull / clone and the server supports the clone bundles
     # feature, tell the server whether we attempted a clone bundle. The
     # presence of this flag indicates the client supports clone bundles. This
     # will enable the server to treat clients that support clone bundles
     # differently from those that don't.
     if (pullop.remote.capable('clonebundles')
         and pullop.heads is None and list(pullop.common) == [nullid]):
         kwargs['cbattempted'] = pullop.clonebundleattempted
 
     if streaming:
         pullop.repo.ui.status(_('streaming all changes\n'))
     elif not pullop.fetch:
         pullop.repo.ui.status(_("no changes found\n"))
         pullop.cgresult = 0
     else:
         if pullop.heads is None and list(pullop.common) == [nullid]:
             pullop.repo.ui.status(_("requesting all changes\n"))
     if obsolete.isenabled(pullop.repo, obsolete.exchangeopt):
         remoteversions = bundle2.obsmarkersversion(pullop.remotebundle2caps)
         if obsolete.commonversion(remoteversions) is not None:
             kwargs['obsmarkers'] = True
             pullop.stepsdone.add('obsmarkers')
     _pullbundle2extraprepare(pullop, kwargs)
 
     with pullop.remote.commandexecutor() as e:
         args = dict(kwargs)
         args['source'] = 'pull'
         bundle = e.callcommand('getbundle', args).result()
 
         try:
             op = bundle2.bundleoperation(pullop.repo, pullop.gettransaction,
                                          source='pull')
             op.modes['bookmarks'] = 'records'
             bundle2.processbundle(pullop.repo, bundle, op=op)
         except bundle2.AbortFromPart as exc:
             pullop.repo.ui.status(_('remote: abort: %s\n') % exc)
             raise error.Abort(_('pull failed on remote'), hint=exc.hint)
         except error.BundleValueError as exc:
             raise error.Abort(_('missing support for %s') % exc)
 
     if pullop.fetch:
         pullop.cgresult = bundle2.combinechangegroupresults(op)
 
     # processing phases change
     for namespace, value in op.records['listkeys']:
         if namespace == 'phases':
             _pullapplyphases(pullop, value)
 
     # processing bookmark update
     if bookmarksrequested:
         books = {}
         for record in op.records['bookmarks']:
             books[record['bookmark']] = record["node"]
         pullop.remotebookmarks = books
     else:
         for namespace, value in op.records['listkeys']:
             if namespace == 'bookmarks':
                 pullop.remotebookmarks = bookmod.unhexlifybookmarks(value)
 
     # bookmark data were either already there or pulled in the bundle
     if pullop.remotebookmarks is not None:
         _pullbookmarks(pullop)
 
 def _pullbundle2extraprepare(pullop, kwargs):
     """hook function so that extensions can extend the getbundle call"""
 
 def _pullchangeset(pullop):
     """pull changeset from unbundle into the local repo"""
     # We delay the open of the transaction as late as possible so we
     # don't open transaction for nothing or you break future useful
     # rollback call
     if 'changegroup' in pullop.stepsdone:
         return
     pullop.stepsdone.add('changegroup')
     if not pullop.fetch:
         pullop.repo.ui.status(_("no changes found\n"))
         pullop.cgresult = 0
         return
     tr = pullop.gettransaction()
     if pullop.heads is None and list(pullop.common) == [nullid]:
         pullop.repo.ui.status(_("requesting all changes\n"))
     elif pullop.heads is None and pullop.remote.capable('changegroupsubset'):
         # issue1320, avoid a race if remote changed after discovery
         pullop.heads = pullop.rheads
 
     if pullop.remote.capable('getbundle'):
         # TODO: get bundlecaps from remote
         cg = pullop.remote.getbundle('pull', common=pullop.common,
                                      heads=pullop.heads or pullop.rheads)
     elif pullop.heads is None:
         with pullop.remote.commandexecutor() as e:
             cg = e.callcommand('changegroup', {
                 'nodes': pullop.fetch,
                 'source': 'pull',
             }).result()
 
     elif not pullop.remote.capable('changegroupsubset'):
         raise error.Abort(_("partial pull cannot be done because "
                            "other repository doesn't support "
                            "changegroupsubset."))
     else:
         with pullop.remote.commandexecutor() as e:
             cg = e.callcommand('changegroupsubset', {
                 'bases': pullop.fetch,
                 'heads': pullop.heads,
                 'source': 'pull',
             }).result()
 
     bundleop = bundle2.applybundle(pullop.repo, cg, tr, 'pull',
                                    pullop.remote.url())
     pullop.cgresult = bundle2.combinechangegroupresults(bundleop)
 
 def _pullphase(pullop):
     # Get remote phases data from remote
     if 'phases' in pullop.stepsdone:
         return
     remotephases = listkeys(pullop.remote, 'phases')
     _pullapplyphases(pullop, remotephases)
 
 def _pullapplyphases(pullop, remotephases):
     """apply phase movement from observed remote state"""
     if 'phases' in pullop.stepsdone:
         return
     pullop.stepsdone.add('phases')
     publishing = bool(remotephases.get('publishing', False))
     if remotephases and not publishing:
         # remote is new and non-publishing
         pheads, _dr = phases.analyzeremotephases(pullop.repo,
                                                  pullop.pulledsubset,
                                                  remotephases)
         dheads = pullop.pulledsubset
     else:
         # Remote is old or publishing all common changesets
         # should be seen as public
         pheads = pullop.pulledsubset
         dheads = []
     unfi = pullop.repo.unfiltered()
     phase = unfi._phasecache.phase
     rev = unfi.changelog.nodemap.get
     public = phases.public
     draft = phases.draft
 
     # exclude changesets already public locally and update the others
     pheads = [pn for pn in pheads if phase(unfi, rev(pn)) > public]
     if pheads:
         tr = pullop.gettransaction()
         phases.advanceboundary(pullop.repo, tr, public, pheads)
 
     # exclude changesets already draft locally and update the others
     dheads = [pn for pn in dheads if phase(unfi, rev(pn)) > draft]
     if dheads:
         tr = pullop.gettransaction()
         phases.advanceboundary(pullop.repo, tr, draft, dheads)
 
 def _pullbookmarks(pullop):
     """process the remote bookmark information to update the local one"""
     if 'bookmarks' in pullop.stepsdone:
         return
     pullop.stepsdone.add('bookmarks')
     repo = pullop.repo
     remotebookmarks = pullop.remotebookmarks
     bookmod.updatefromremote(repo.ui, repo, remotebookmarks,
                              pullop.remote.url(),
                              pullop.gettransaction,
                              explicit=pullop.explicitbookmarks)
 
 def _pullobsolete(pullop):
     """utility function to pull obsolete markers from a remote
 
     The `gettransaction` is function that return the pull transaction, creating
     one if necessary. We return the transaction to inform the calling code that
     a new transaction have been created (when applicable).
 
     Exists mostly to allow overriding for experimentation purpose"""
     if 'obsmarkers' in pullop.stepsdone:
         return
     pullop.stepsdone.add('obsmarkers')
     tr = None
     if obsolete.isenabled(pullop.repo, obsolete.exchangeopt):
         pullop.repo.ui.debug('fetching remote obsolete markers\n')
         remoteobs = listkeys(pullop.remote, 'obsolete')
         if 'dump0' in remoteobs:
             tr = pullop.gettransaction()
             markers = []
             for key in sorted(remoteobs, reverse=True):
                 if key.startswith('dump'):
                     data = util.b85decode(remoteobs[key])
                     version, newmarks = obsolete._readmarkers(data)
                     markers += newmarks
             if markers:
                 pullop.repo.obsstore.add(tr, markers)
             pullop.repo.invalidatevolatilesets()
     return tr
 
 def applynarrowacl(repo, kwargs):
     """Apply narrow fetch access control.
 
     This massages the named arguments for getbundle wire protocol commands
     so requested data is filtered through access control rules.
     """
     ui = repo.ui
     # TODO this assumes existence of HTTP and is a layering violation.
     username = ui.shortuser(ui.environ.get('REMOTE_USER') or ui.username())
     user_includes = ui.configlist(
         _NARROWACL_SECTION, username + '.includes',
         ui.configlist(_NARROWACL_SECTION, 'default.includes'))
     user_excludes = ui.configlist(
         _NARROWACL_SECTION, username + '.excludes',
         ui.configlist(_NARROWACL_SECTION, 'default.excludes'))
     if not user_includes:
         raise error.Abort(_("{} configuration for user {} is empty")
                           .format(_NARROWACL_SECTION, username))
 
     user_includes = [
         'path:.' if p == '*' else 'path:' + p for p in user_includes]
     user_excludes = [
         'path:.' if p == '*' else 'path:' + p for p in user_excludes]
 
     req_includes = set(kwargs.get(r'includepats', []))
     req_excludes = set(kwargs.get(r'excludepats', []))
 
     req_includes, req_excludes, invalid_includes = narrowspec.restrictpatterns(
         req_includes, req_excludes, user_includes, user_excludes)
 
     if invalid_includes:
         raise error.Abort(
             _("The following includes are not accessible for {}: {}")
             .format(username, invalid_includes))
 
     new_args = {}
     new_args.update(kwargs)
     new_args[r'narrow'] = True
     new_args[r'includepats'] = req_includes
     if req_excludes:
         new_args[r'excludepats'] = req_excludes
 
     return new_args
 
 def _computeellipsis(repo, common, heads, known, match, depth=None):
     """Compute the shape of a narrowed DAG.
 
     Args:
       repo: The repository we're transferring.
       common: The roots of the DAG range we're transferring.
               May be just [nullid], which means all ancestors of heads.
       heads: The heads of the DAG range we're transferring.
       match: The narrowmatcher that allows us to identify relevant changes.
       depth: If not None, only consider nodes to be full nodes if they are at
              most depth changesets away from one of heads.
 
     Returns:
       A tuple of (visitnodes, relevant_nodes, ellipsisroots) where:
 
         visitnodes: The list of nodes (either full or ellipsis) which
                     need to be sent to the client.
         relevant_nodes: The set of changelog nodes which change a file inside
                  the narrowspec. The client needs these as non-ellipsis nodes.
         ellipsisroots: A dict of {rev: parents} that is used in
                        narrowchangegroup to produce ellipsis nodes with the
                        correct parents.
     """
     cl = repo.changelog
     mfl = repo.manifestlog
 
     clrev = cl.rev
 
     commonrevs = {clrev(n) for n in common} | {nullrev}
     headsrevs = {clrev(n) for n in heads}
 
     if depth:
         revdepth = {h: 0 for h in headsrevs}
 
     ellipsisheads = collections.defaultdict(set)
     ellipsisroots = collections.defaultdict(set)
 
     def addroot(head, curchange):
         """Add a root to an ellipsis head, splitting heads with 3 roots."""
         ellipsisroots[head].add(curchange)
         # Recursively split ellipsis heads with 3 roots by finding the
         # roots' youngest common descendant which is an elided merge commit.
         # That descendant takes 2 of the 3 roots as its own, and becomes a
         # root of the head.
         while len(ellipsisroots[head]) > 2:
             child, roots = splithead(head)
             splitroots(head, child, roots)
             head = child  # Recurse in case we just added a 3rd root
 
     def splitroots(head, child, roots):
         ellipsisroots[head].difference_update(roots)
         ellipsisroots[head].add(child)
         ellipsisroots[child].update(roots)
         ellipsisroots[child].discard(child)
 
     def splithead(head):
         r1, r2, r3 = sorted(ellipsisroots[head])
         for nr1, nr2 in ((r2, r3), (r1, r3), (r1, r2)):
             mid = repo.revs('sort(merge() & %d::%d & %d::%d, -rev)',
                             nr1, head, nr2, head)
             for j in mid:
                 if j == nr2:
                     return nr2, (nr1, nr2)
                 if j not in ellipsisroots or len(ellipsisroots[j]) < 2:
                     return j, (nr1, nr2)
         raise error.Abort(_('Failed to split up ellipsis node! head: %d, '
                             'roots: %d %d %d') % (head, r1, r2, r3))
 
     missing = list(cl.findmissingrevs(common=commonrevs, heads=headsrevs))
     visit = reversed(missing)
     relevant_nodes = set()
     visitnodes = [cl.node(m) for m in missing]
     required = set(headsrevs) | known
     for rev in visit:
         clrev = cl.changelogrevision(rev)
         ps = [prev for prev in cl.parentrevs(rev) if prev != nullrev]
         if depth is not None:
             curdepth = revdepth[rev]
             for p in ps:
                 revdepth[p] = min(curdepth + 1, revdepth.get(p, depth + 1))
         needed = False
         shallow_enough = depth is None or revdepth[rev] <= depth
         if shallow_enough:
             curmf = mfl[clrev.manifest].read()
             if ps:
                 # We choose to not trust the changed files list in
                 # changesets because it's not always correct. TODO: could
                 # we trust it for the non-merge case?
                 p1mf = mfl[cl.changelogrevision(ps[0]).manifest].read()
                 needed = bool(curmf.diff(p1mf, match))
                 if not needed and len(ps) > 1:
                     # For merge changes, the list of changed files is not
                     # helpful, since we need to emit the merge if a file
                     # in the narrow spec has changed on either side of the
                     # merge. As a result, we do a manifest diff to check.
                     p2mf = mfl[cl.changelogrevision(ps[1]).manifest].read()
                     needed = bool(curmf.diff(p2mf, match))
             else:
                 # For a root node, we need to include the node if any
                 # files in the node match the narrowspec.
                 needed = any(curmf.walk(match))
 
         if needed:
             for head in ellipsisheads[rev]:
                 addroot(head, rev)
             for p in ps:
                 required.add(p)
             relevant_nodes.add(cl.node(rev))
         else:
             if not ps:
                 ps = [nullrev]
             if rev in required:
                 for head in ellipsisheads[rev]:
                     addroot(head, rev)
                 for p in ps:
                     ellipsisheads[p].add(rev)
             else:
                 for p in ps:
                     ellipsisheads[p] |= ellipsisheads[rev]
 
     # add common changesets as roots of their reachable ellipsis heads
     for c in commonrevs:
         for head in ellipsisheads[c]:
             addroot(head, c)
     return visitnodes, relevant_nodes, ellipsisroots
 
 def caps20to10(repo, role):
     """return a set with appropriate options to use bundle20 during getbundle"""
     caps = {'HG20'}
     capsblob = bundle2.encodecaps(bundle2.getrepocaps(repo, role=role))
     caps.add('bundle2=' + urlreq.quote(capsblob))
     return caps
 
 # List of names of steps to perform for a bundle2 for getbundle, order matters.
 getbundle2partsorder = []
 
 # Mapping between step name and function
 #
 # This exists to help extensions wrap steps if necessary
 getbundle2partsmapping = {}
 
 def getbundle2partsgenerator(stepname, idx=None):
     """decorator for function generating bundle2 part for getbundle
 
     The function is added to the step -> function mapping and appended to the
     list of steps.  Beware that decorated functions will be added in order
     (this may matter).
 
     You can only use this decorator for new steps, if you want to wrap a step
     from an extension, attack the getbundle2partsmapping dictionary directly."""
     def dec(func):
         assert stepname not in getbundle2partsmapping
         getbundle2partsmapping[stepname] = func
         if idx is None:
             getbundle2partsorder.append(stepname)
         else:
             getbundle2partsorder.insert(idx, stepname)
         return func
     return dec
 
 def bundle2requested(bundlecaps):
     if bundlecaps is not None:
         return any(cap.startswith('HG2') for cap in bundlecaps)
     return False
 
 def getbundlechunks(repo, source, heads=None, common=None, bundlecaps=None,
                     **kwargs):
     """Return chunks constituting a bundle's raw data.
 
     Could be a bundle HG10 or a bundle HG20 depending on bundlecaps
     passed.
 
     Returns a 2-tuple of a dict with metadata about the generated bundle
     and an iterator over raw chunks (of varying sizes).
     """
     kwargs = pycompat.byteskwargs(kwargs)
     info = {}
     usebundle2 = bundle2requested(bundlecaps)
     # bundle10 case
     if not usebundle2:
         if bundlecaps and not kwargs.get('cg', True):
             raise ValueError(_('request for bundle10 must include changegroup'))
 
         if kwargs:
             raise ValueError(_('unsupported getbundle arguments: %s')
                              % ', '.join(sorted(kwargs.keys())))
         outgoing = _computeoutgoing(repo, heads, common)
         info['bundleversion'] = 1
         return info, changegroup.makestream(repo, outgoing, '01', source,
                                             bundlecaps=bundlecaps)
 
     # bundle20 case
     info['bundleversion'] = 2
     b2caps = {}
     for bcaps in bundlecaps:
         if bcaps.startswith('bundle2='):
             blob = urlreq.unquote(bcaps[len('bundle2='):])
             b2caps.update(bundle2.decodecaps(blob))
     bundler = bundle2.bundle20(repo.ui, b2caps)
 
     kwargs['heads'] = heads
     kwargs['common'] = common
 
     for name in getbundle2partsorder:
         func = getbundle2partsmapping[name]
         func(bundler, repo, source, bundlecaps=bundlecaps, b2caps=b2caps,
              **pycompat.strkwargs(kwargs))
 
     info['prefercompressed'] = bundler.prefercompressed
 
     return info, bundler.getchunks()
 
 @getbundle2partsgenerator('stream2')
 def _getbundlestream2(bundler, repo, *args, **kwargs):
     return bundle2.addpartbundlestream2(bundler, repo, **kwargs)
 
 @getbundle2partsgenerator('changegroup')
 def _getbundlechangegrouppart(bundler, repo, source, bundlecaps=None,
                               b2caps=None, heads=None, common=None, **kwargs):
     """add a changegroup part to the requested bundle"""
     if not kwargs.get(r'cg', True):
         return
 
     version = '01'
     cgversions = b2caps.get('changegroup')
     if cgversions:  # 3.1 and 3.2 ship with an empty value
         cgversions = [v for v in cgversions
                       if v in changegroup.supportedoutgoingversions(repo)]
         if not cgversions:
             raise ValueError(_('no common changegroup version'))
         version = max(cgversions)
 
     outgoing = _computeoutgoing(repo, heads, common)
     if not outgoing.missing:
         return
 
     if kwargs.get(r'narrow', False):
         include = sorted(filter(bool, kwargs.get(r'includepats', [])))
         exclude = sorted(filter(bool, kwargs.get(r'excludepats', [])))
         filematcher = narrowspec.match(repo.root, include=include,
                                        exclude=exclude)
     else:
         filematcher = None
 
     cgstream = changegroup.makestream(repo, outgoing, version, source,
                                       bundlecaps=bundlecaps,
                                       filematcher=filematcher)
 
     part = bundler.newpart('changegroup', data=cgstream)
     if cgversions:
         part.addparam('version', version)
 
     part.addparam('nbchanges', '%d' % len(outgoing.missing),
                   mandatory=False)
 
     if 'treemanifest' in repo.requirements:
         part.addparam('treemanifest', '1')
 
     if kwargs.get(r'narrow', False) and (include or exclude):
         narrowspecpart = bundler.newpart('narrow:spec')
         if include:
             narrowspecpart.addparam(
                 'include', '\n'.join(include), mandatory=True)
         if exclude:
             narrowspecpart.addparam(
                 'exclude', '\n'.join(exclude), mandatory=True)
 
 @getbundle2partsgenerator('bookmarks')
 def _getbundlebookmarkpart(bundler, repo, source, bundlecaps=None,
                               b2caps=None, **kwargs):
     """add a bookmark part to the requested bundle"""
     if not kwargs.get(r'bookmarks', False):
         return
     if 'bookmarks' not in b2caps:
         raise ValueError(_('no common bookmarks exchange method'))
     books  = bookmod.listbinbookmarks(repo)
     data = bookmod.binaryencode(books)
     if data:
         bundler.newpart('bookmarks', data=data)
 
 @getbundle2partsgenerator('listkeys')
 def _getbundlelistkeysparts(bundler, repo, source, bundlecaps=None,
                             b2caps=None, **kwargs):
     """add parts containing listkeys namespaces to the requested bundle"""
     listkeys = kwargs.get(r'listkeys', ())
     for namespace in listkeys:
         part = bundler.newpart('listkeys')
         part.addparam('namespace', namespace)
         keys = repo.listkeys(namespace).items()
         part.data = pushkey.encodekeys(keys)
 
 @getbundle2partsgenerator('obsmarkers')
 def _getbundleobsmarkerpart(bundler, repo, source, bundlecaps=None,
                             b2caps=None, heads=None, **kwargs):
     """add an obsolescence markers part to the requested bundle"""
     if kwargs.get(r'obsmarkers', False):
         if heads is None:
             heads = repo.heads()
         subset = [c.node() for c in repo.set('::%ln', heads)]
         markers = repo.obsstore.relevantmarkers(subset)
         markers = sorted(markers)
         bundle2.buildobsmarkerspart(bundler, markers)
 
 @getbundle2partsgenerator('phases')
 def _getbundlephasespart(bundler, repo, source, bundlecaps=None,
                             b2caps=None, heads=None, **kwargs):
     """add phase heads part to the requested bundle"""
     if kwargs.get(r'phases', False):
         if not 'heads' in b2caps.get('phases'):
             raise ValueError(_('no common phases exchange method'))
         if heads is None:
             heads = repo.heads()
 
         headsbyphase = collections.defaultdict(set)
         if repo.publishing():
             headsbyphase[phases.public] = heads
         else:
             # find the appropriate heads to move
 
             phase = repo._phasecache.phase
             node = repo.changelog.node
             rev = repo.changelog.rev
             for h in heads:
                 headsbyphase[phase(repo, rev(h))].add(h)
             seenphases = list(headsbyphase.keys())
 
             # We do not handle anything but public and draft phase for now)
             if seenphases:
                 assert max(seenphases) <= phases.draft
 
             # if client is pulling non-public changesets, we need to find
             # intermediate public heads.
             draftheads = headsbyphase.get(phases.draft, set())
             if draftheads:
                 publicheads = headsbyphase.get(phases.public, set())
 
                 revset = 'heads(only(%ln, %ln) and public())'
                 extraheads = repo.revs(revset, draftheads, publicheads)
                 for r in extraheads:
                     headsbyphase[phases.public].add(node(r))
 
         # transform data in a format used by the encoding function
         phasemapping = []
         for phase in phases.allphases:
             phasemapping.append(sorted(headsbyphase[phase]))
 
         # generate the actual part
         phasedata = phases.binaryencode(phasemapping)
         bundler.newpart('phase-heads', data=phasedata)
 
 @getbundle2partsgenerator('hgtagsfnodes')
 def _getbundletagsfnodes(bundler, repo, source, bundlecaps=None,
                          b2caps=None, heads=None, common=None,
                          **kwargs):
     """Transfer the .hgtags filenodes mapping.
 
     Only values for heads in this bundle will be transferred.
 
     The part data consists of pairs of 20 byte changeset node and .hgtags
     filenodes raw values.
     """
     # Don't send unless:
     # - changeset are being exchanged,
     # - the client supports it.
     if not (kwargs.get(r'cg', True) and 'hgtagsfnodes' in b2caps):
         return
 
     outgoing = _computeoutgoing(repo, heads, common)
     bundle2.addparttagsfnodescache(repo, bundler, outgoing)
 
 @getbundle2partsgenerator('cache:rev-branch-cache')
 def _getbundlerevbranchcache(bundler, repo, source, bundlecaps=None,
                              b2caps=None, heads=None, common=None,
                              **kwargs):
     """Transfer the rev-branch-cache mapping
 
     The payload is a series of data related to each branch
 
     1) branch name length
     2) number of open heads
     3) number of closed heads
     4) open heads nodes
     5) closed heads nodes
     """
     # Don't send unless:
     # - changeset are being exchanged,
     # - the client supports it.
     # - narrow bundle isn't in play (not currently compatible).
     if (not kwargs.get(r'cg', True)
         or 'rev-branch-cache' not in b2caps
         or kwargs.get(r'narrow', False)
         or repo.ui.has_section(_NARROWACL_SECTION)):
         return
 
     outgoing = _computeoutgoing(repo, heads, common)
     bundle2.addpartrevbranchcache(repo, bundler, outgoing)
 
 def check_heads(repo, their_heads, context):
     """check if the heads of a repo have been modified
 
     Used by peer for unbundling.
     """
     heads = repo.heads()
     heads_hash = hashlib.sha1(''.join(sorted(heads))).digest()
     if not (their_heads == ['force'] or their_heads == heads or
             their_heads == ['hashed', heads_hash]):
         # someone else committed/pushed/unbundled while we
         # were transferring data
         raise error.PushRaced('repository changed while %s - '
                               'please try again' % context)
 
 def unbundle(repo, cg, heads, source, url):
     """Apply a bundle to a repo.
 
     this function makes sure the repo is locked during the application and have
     mechanism to check that no push race occurred between the creation of the
     bundle and its application.
 
     If the push was raced as PushRaced exception is raised."""
     r = 0
     # need a transaction when processing a bundle2 stream
     # [wlock, lock, tr] - needs to be an array so nested functions can modify it
     lockandtr = [None, None, None]
     recordout = None
     # quick fix for output mismatch with bundle2 in 3.4
     captureoutput = repo.ui.configbool('experimental', 'bundle2-output-capture')
     if url.startswith('remote:http:') or url.startswith('remote:https:'):
         captureoutput = True
     try:
         # note: outside bundle1, 'heads' is expected to be empty and this
         # 'check_heads' call wil be a no-op
         check_heads(repo, heads, 'uploading changes')
         # push can proceed
         if not isinstance(cg, bundle2.unbundle20):
             # legacy case: bundle1 (changegroup 01)
             txnname = "\n".join([source, util.hidepassword(url)])
             with repo.lock(), repo.transaction(txnname) as tr:
                 op = bundle2.applybundle(repo, cg, tr, source, url)
                 r = bundle2.combinechangegroupresults(op)
         else:
             r = None
             try:
                 def gettransaction():
                     if not lockandtr[2]:
                         lockandtr[0] = repo.wlock()
                         lockandtr[1] = repo.lock()
                         lockandtr[2] = repo.transaction(source)
                         lockandtr[2].hookargs['source'] = source
                         lockandtr[2].hookargs['url'] = url
                         lockandtr[2].hookargs['bundle2'] = '1'
                     return lockandtr[2]
 
                 # Do greedy locking by default until we're satisfied with lazy
                 # locking.
                 if not repo.ui.configbool('experimental', 'bundle2lazylocking'):
                     gettransaction()
 
                 op = bundle2.bundleoperation(repo, gettransaction,
                                              captureoutput=captureoutput,
                                              source='push')
                 try:
                     op = bundle2.processbundle(repo, cg, op=op)
                 finally:
                     r = op.reply
                     if captureoutput and r is not None:
                         repo.ui.pushbuffer(error=True, subproc=True)
                         def recordout(output):
                             r.newpart('output', data=output, mandatory=False)
                 if lockandtr[2] is not None:
                     lockandtr[2].close()
             except BaseException as exc:
                 exc.duringunbundle2 = True
                 if captureoutput and r is not None:
                     parts = exc._bundle2salvagedoutput = r.salvageoutput()
                     def recordout(output):
                         part = bundle2.bundlepart('output', data=output,
                                                   mandatory=False)
                         parts.append(part)
                 raise
     finally:
         lockmod.release(lockandtr[2], lockandtr[1], lockandtr[0])
         if recordout is not None:
             recordout(repo.ui.popbuffer())
     return r
 
 def _maybeapplyclonebundle(pullop):
     """Apply a clone bundle from a remote, if possible."""
 
     repo = pullop.repo
     remote = pullop.remote
 
     if not repo.ui.configbool('ui', 'clonebundles'):
         return
 
     # Only run if local repo is empty.
     if len(repo):
         return
 
     if pullop.heads:
         return
 
     if not remote.capable('clonebundles'):
         return
 
     with remote.commandexecutor() as e:
         res = e.callcommand('clonebundles', {}).result()
 
     # If we call the wire protocol command, that's good enough to record the
     # attempt.
     pullop.clonebundleattempted = True
 
     entries = parseclonebundlesmanifest(repo, res)
     if not entries:
         repo.ui.note(_('no clone bundles available on remote; '
                        'falling back to regular clone\n'))
         return
 
     entries = filterclonebundleentries(
         repo, entries, streamclonerequested=pullop.streamclonerequested)
 
     if not entries:
         # There is a thundering herd concern here. However, if a server
         # operator doesn't advertise bundles appropriate for its clients,
         # they deserve what's coming. Furthermore, from a client's
         # perspective, no automatic fallback would mean not being able to
         # clone!
         repo.ui.warn(_('no compatible clone bundles available on server; '
                        'falling back to regular clone\n'))
         repo.ui.warn(_('(you may want to report this to the server '
                        'operator)\n'))
         return
 
     entries = sortclonebundleentries(repo.ui, entries)
 
     url = entries[0]['URL']
     repo.ui.status(_('applying clone bundle from %s\n') % url)
     if trypullbundlefromurl(repo.ui, repo, url):
         repo.ui.status(_('finished applying clone bundle\n'))
     # Bundle failed.
     #
     # We abort by default to avoid the thundering herd of
     # clients flooding a server that was expecting expensive
     # clone load to be offloaded.
     elif repo.ui.configbool('ui', 'clonebundlefallback'):
         repo.ui.warn(_('falling back to normal clone\n'))
     else:
         raise error.Abort(_('error applying bundle'),
                           hint=_('if this error persists, consider contacting '
                                  'the server operator or disable clone '
                                  'bundles via '
                                  '"--config ui.clonebundles=false"'))
 
 def parseclonebundlesmanifest(repo, s):
     """Parses the raw text of a clone bundles manifest.
 
     Returns a list of dicts. The dicts have a ``URL`` key corresponding
     to the URL and other keys are the attributes for the entry.
     """
     m = []
     for line in s.splitlines():
         fields = line.split()
         if not fields:
             continue
         attrs = {'URL': fields[0]}
         for rawattr in fields[1:]:
             key, value = rawattr.split('=', 1)
             key = urlreq.unquote(key)
             value = urlreq.unquote(value)
             attrs[key] = value
 
             # Parse BUNDLESPEC into components. This makes client-side
             # preferences easier to specify since you can prefer a single
             # component of the BUNDLESPEC.
             if key == 'BUNDLESPEC':
                 try:
                     bundlespec = parsebundlespec(repo, value)
                     attrs['COMPRESSION'] = bundlespec.compression
                     attrs['VERSION'] = bundlespec.version
                 except error.InvalidBundleSpecification:
                     pass
                 except error.UnsupportedBundleSpecification:
                     pass
 
         m.append(attrs)
 
     return m
 
 def isstreamclonespec(bundlespec):
     # Stream clone v1
     if (bundlespec.wirecompression == 'UN' and bundlespec.wireversion == 's1'):
         return True
 
     # Stream clone v2
     if (bundlespec.wirecompression == 'UN' and \
         bundlespec.wireversion == '02' and \
         bundlespec.contentopts.get('streamv2')):
         return True
 
     return False
 
 def filterclonebundleentries(repo, entries, streamclonerequested=False):
     """Remove incompatible clone bundle manifest entries.
 
     Accepts a list of entries parsed with ``parseclonebundlesmanifest``
     and returns a new list consisting of only the entries that this client
     should be able to apply.
 
     There is no guarantee we'll be able to apply all returned entries because
     the metadata we use to filter on may be missing or wrong.
     """
     newentries = []
     for entry in entries:
         spec = entry.get('BUNDLESPEC')
         if spec:
             try:
                 bundlespec = parsebundlespec(repo, spec, strict=True)
 
                 # If a stream clone was requested, filter out non-streamclone
                 # entries.
                 if streamclonerequested and not isstreamclonespec(bundlespec):
                     repo.ui.debug('filtering %s because not a stream clone\n' %
                                   entry['URL'])
                     continue
 
             except error.InvalidBundleSpecification as e:
                 repo.ui.debug(stringutil.forcebytestr(e) + '\n')
                 continue
             except error.UnsupportedBundleSpecification as e:
                 repo.ui.debug('filtering %s because unsupported bundle '
                               'spec: %s\n' % (
                                   entry['URL'], stringutil.forcebytestr(e)))
                 continue
         # If we don't have a spec and requested a stream clone, we don't know
         # what the entry is so don't attempt to apply it.
         elif streamclonerequested:
             repo.ui.debug('filtering %s because cannot determine if a stream '
                           'clone bundle\n' % entry['URL'])
             continue
 
         if 'REQUIRESNI' in entry and not sslutil.hassni:
             repo.ui.debug('filtering %s because SNI not supported\n' %
                           entry['URL'])
             continue
 
         newentries.append(entry)
 
     return newentries
 
 class clonebundleentry(object):
     """Represents an item in a clone bundles manifest.
 
     This rich class is needed to support sorting since sorted() in Python 3
     doesn't support ``cmp`` and our comparison is complex enough that ``key=``
     won't work.
     """
 
     def __init__(self, value, prefers):
         self.value = value
         self.prefers = prefers
 
     def _cmp(self, other):
         for prefkey, prefvalue in self.prefers:
             avalue = self.value.get(prefkey)
             bvalue = other.value.get(prefkey)
 
             # Special case for b missing attribute and a matches exactly.
             if avalue is not None and bvalue is None and avalue == prefvalue:
                 return -1
 
             # Special case for a missing attribute and b matches exactly.
             if bvalue is not None and avalue is None and bvalue == prefvalue:
                 return 1
 
             # We can't compare unless attribute present on both.
             if avalue is None or bvalue is None:
                 continue
 
             # Same values should fall back to next attribute.
             if avalue == bvalue:
                 continue
 
             # Exact matches come first.
             if avalue == prefvalue:
                 return -1
             if bvalue == prefvalue:
                 return 1
 
             # Fall back to next attribute.
             continue
 
         # If we got here we couldn't sort by attributes and prefers. Fall
         # back to index order.
         return 0
 
     def __lt__(self, other):
         return self._cmp(other) < 0
 
     def __gt__(self, other):
         return self._cmp(other) > 0
 
     def __eq__(self, other):
         return self._cmp(other) == 0
 
     def __le__(self, other):
         return self._cmp(other) <= 0
 
     def __ge__(self, other):
         return self._cmp(other) >= 0
 
     def __ne__(self, other):
         return self._cmp(other) != 0
 
 def sortclonebundleentries(ui, entries):
     prefers = ui.configlist('ui', 'clonebundleprefers')
     if not prefers:
         return list(entries)
 
     prefers = [p.split('=', 1) for p in prefers]
 
     items = sorted(clonebundleentry(v, prefers) for v in entries)
     return [i.value for i in items]
 
 def trypullbundlefromurl(ui, repo, url):
     """Attempt to apply a bundle from a URL."""
     with repo.lock(), repo.transaction('bundleurl') as tr:
         try:
             fh = urlmod.open(ui, url)
             cg = readbundle(ui, fh, 'stream')
 
             if isinstance(cg, streamclone.streamcloneapplier):
                 cg.apply(repo)
             else:
                 bundle2.applybundle(repo, cg, tr, 'clonebundles', url)
             return True
         except urlerr.httperror as e:
             ui.warn(_('HTTP error fetching bundle: %s\n') %
                     stringutil.forcebytestr(e))
         except urlerr.urlerror as e:
             ui.warn(_('error fetching bundle: %s\n') %
                     stringutil.forcebytestr(e.reason))
 
         return False

mercurial/httppeer.py

@@ -1,1006 +1,1007
 # httppeer.py - HTTP repository proxy classes for mercurial
 #
 # Copyright 2005, 2006 Matt Mackall <[e-mail]>
 # Copyright 2006 Vadim Gelfer <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 import errno
 import io
 import os
 import socket
 import struct
 import weakref
 
 from .i18n import _
 from . import (
     bundle2,
     error,
     httpconnection,
     pycompat,
     repository,
     statichttprepo,
     url as urlmod,
     util,
     wireprotoframing,
     wireprototypes,
     wireprotov1peer,
     wireprotov2peer,
     wireprotov2server,
 )
 from .utils import (
     cborutil,
     interfaceutil,
     stringutil,
 )
 
 httplib = util.httplib
 urlerr = util.urlerr
 urlreq = util.urlreq
 
 def encodevalueinheaders(value, header, limit):
     """Encode a string value into multiple HTTP headers.
 
     ``value`` will be encoded into 1 or more HTTP headers with the names
     ``header-<N>`` where ``<N>`` is an integer starting at 1. Each header
     name + value will be at most ``limit`` bytes long.
 
     Returns an iterable of 2-tuples consisting of header names and
     values as native strings.
     """
     # HTTP Headers are ASCII. Python 3 requires them to be unicodes,
     # not bytes. This function always takes bytes in as arguments.
     fmt = pycompat.strurl(header) + r'-%s'
     # Note: it is *NOT* a bug that the last bit here is a bytestring
     # and not a unicode: we're just getting the encoded length anyway,
     # and using an r-string to make it portable between Python 2 and 3
     # doesn't work because then the \r is a literal backslash-r
     # instead of a carriage return.
     valuelen = limit - len(fmt % r'000') - len(': \r\n')
     result = []
 
     n = 0
     for i in pycompat.xrange(0, len(value), valuelen):
         n += 1
         result.append((fmt % str(n), pycompat.strurl(value[i:i + valuelen])))
 
     return result
 
 def _wraphttpresponse(resp):
     """Wrap an HTTPResponse with common error handlers.
 
     This ensures that any I/O from any consumer raises the appropriate
     error and messaging.
     """
     origread = resp.read
 
     class readerproxy(resp.__class__):
         def read(self, size=None):
             try:
                 return origread(size)
             except httplib.IncompleteRead as e:
                 # e.expected is an integer if length known or None otherwise.
                 if e.expected:
                     got = len(e.partial)
                     total = e.expected + got
                     msg = _('HTTP request error (incomplete response; '
                             'expected %d bytes got %d)') % (total, got)
                 else:
                     msg = _('HTTP request error (incomplete response)')
 
                 raise error.PeerTransportError(
                     msg,
                     hint=_('this may be an intermittent network failure; '
                            'if the error persists, consider contacting the '
                            'network or server operator'))
             except httplib.HTTPException as e:
                 raise error.PeerTransportError(
                     _('HTTP request error (%s)') % e,
                     hint=_('this may be an intermittent network failure; '
                            'if the error persists, consider contacting the '
                            'network or server operator'))
 
     resp.__class__ = readerproxy
 
 class _multifile(object):
     def __init__(self, *fileobjs):
         for f in fileobjs:
             if not util.safehasattr(f, 'length'):
                 raise ValueError(
                     '_multifile only supports file objects that '
                     'have a length but this one does not:', type(f), f)
         self._fileobjs = fileobjs
         self._index = 0
 
     @property
     def length(self):
         return sum(f.length for f in self._fileobjs)
 
     def read(self, amt=None):
         if amt <= 0:
             return ''.join(f.read() for f in self._fileobjs)
         parts = []
         while amt and self._index < len(self._fileobjs):
             parts.append(self._fileobjs[self._index].read(amt))
             got = len(parts[-1])
             if got < amt:
                 self._index += 1
             amt -= got
         return ''.join(parts)
 
     def seek(self, offset, whence=os.SEEK_SET):
         if whence != os.SEEK_SET:
             raise NotImplementedError(
                 '_multifile does not support anything other'
                 ' than os.SEEK_SET for whence on seek()')
         if offset != 0:
             raise NotImplementedError(
                 '_multifile only supports seeking to start, but that '
                 'could be fixed if you need it')
         for f in self._fileobjs:
             f.seek(0)
         self._index = 0
 
 def makev1commandrequest(ui, requestbuilder, caps, capablefn,
                          repobaseurl, cmd, args):
     """Make an HTTP request to run a command for a version 1 client.
 
     ``caps`` is a set of known server capabilities. The value may be
     None if capabilities are not yet known.
 
     ``capablefn`` is a function to evaluate a capability.
 
     ``cmd``, ``args``, and ``data`` define the command, its arguments, and
     raw data to pass to it.
     """
     if cmd == 'pushkey':
         args['data'] = ''
     data = args.pop('data', None)
     headers = args.pop('headers', {})
 
     ui.debug("sending %s command\n" % cmd)
     q = [('cmd', cmd)]
     headersize = 0
     # Important: don't use self.capable() here or else you end up
     # with infinite recursion when trying to look up capabilities
     # for the first time.
     postargsok = caps is not None and 'httppostargs' in caps
 
     # Send arguments via POST.
     if postargsok and args:
         strargs = urlreq.urlencode(sorted(args.items()))
         if not data:
             data = strargs
         else:
             if isinstance(data, bytes):
                 i = io.BytesIO(data)
                 i.length = len(data)
                 data = i
             argsio = io.BytesIO(strargs)
             argsio.length = len(strargs)
             data = _multifile(argsio, data)
         headers[r'X-HgArgs-Post'] = len(strargs)
     elif args:
         # Calling self.capable() can infinite loop if we are calling
         # "capabilities". But that command should never accept wire
         # protocol arguments. So this should never happen.
         assert cmd != 'capabilities'
         httpheader = capablefn('httpheader')
         if httpheader:
             headersize = int(httpheader.split(',', 1)[0])
 
         # Send arguments via HTTP headers.
         if headersize > 0:
             # The headers can typically carry more data than the URL.
             encargs = urlreq.urlencode(sorted(args.items()))
             for header, value in encodevalueinheaders(encargs, 'X-HgArg',
                                                       headersize):
                 headers[header] = value
         # Send arguments via query string (Mercurial <1.9).
         else:
             q += sorted(args.items())
 
     qs = '?%s' % urlreq.urlencode(q)
     cu = "%s%s" % (repobaseurl, qs)
     size = 0
     if util.safehasattr(data, 'length'):
         size = data.length
     elif data is not None:
         size = len(data)
     if data is not None and r'Content-Type' not in headers:
         headers[r'Content-Type'] = r'application/mercurial-0.1'
 
     # Tell the server we accept application/mercurial-0.2 and multiple
     # compression formats if the server is capable of emitting those
     # payloads.
     # Note: Keep this set empty by default, as client advertisement of
     # protocol parameters should only occur after the handshake.
     protoparams = set()
 
     mediatypes = set()
     if caps is not None:
         mt = capablefn('httpmediatype')
         if mt:
             protoparams.add('0.1')
             mediatypes = set(mt.split(','))
 
         protoparams.add('partial-pull')
 
     if '0.2tx' in mediatypes:
         protoparams.add('0.2')
 
     if '0.2tx' in mediatypes and capablefn('compression'):
         # We /could/ compare supported compression formats and prune
         # non-mutually supported or error if nothing is mutually supported.
         # For now, send the full list to the server and have it error.
         comps = [e.wireprotosupport().name for e in
                  util.compengines.supportedwireengines(util.CLIENTROLE)]
         protoparams.add('comp=%s' % ','.join(comps))
 
     if protoparams:
         protoheaders = encodevalueinheaders(' '.join(sorted(protoparams)),
                                             'X-HgProto',
                                             headersize or 1024)
         for header, value in protoheaders:
             headers[header] = value
 
     varyheaders = []
     for header in headers:
         if header.lower().startswith(r'x-hg'):
             varyheaders.append(header)
 
     if varyheaders:
         headers[r'Vary'] = r','.join(sorted(varyheaders))
 
     req = requestbuilder(pycompat.strurl(cu), data, headers)
 
     if data is not None:
         ui.debug("sending %d bytes\n" % size)
         req.add_unredirected_header(r'Content-Length', r'%d' % size)
 
     return req, cu, qs
 
 def _reqdata(req):
     """Get request data, if any. If no data, returns None."""
     if pycompat.ispy3:
         return req.data
     if not req.has_data():
         return None
     return req.get_data()
 
 def sendrequest(ui, opener, req):
     """Send a prepared HTTP request.
 
     Returns the response object.
     """
     dbg = ui.debug
     if (ui.debugflag
         and ui.configbool('devel', 'debug.peer-request')):
         line = 'devel-peer-request: %s\n'
         dbg(line % '%s %s' % (pycompat.bytesurl(req.get_method()),
                               pycompat.bytesurl(req.get_full_url())))
         hgargssize = None
 
         for header, value in sorted(req.header_items()):
             header = pycompat.bytesurl(header)
             value = pycompat.bytesurl(value)
             if header.startswith('X-hgarg-'):
                 if hgargssize is None:
                     hgargssize = 0
                 hgargssize += len(value)
             else:
                 dbg(line % '  %s %s' % (header, value))
 
         if hgargssize is not None:
             dbg(line % '  %d bytes of commands arguments in headers'
                 % hgargssize)
         data = _reqdata(req)
         if data is not None:
             length = getattr(data, 'length', None)
             if length is None:
                 length = len(data)
             dbg(line % '  %d bytes of data' % length)
 
         start = util.timer()
 
     res = None
     try:
         res = opener.open(req)
     except urlerr.httperror as inst:
         if inst.code == 401:
             raise error.Abort(_('authorization failed'))
         raise
     except httplib.HTTPException as inst:
         ui.debug('http error requesting %s\n' %
                  util.hidepassword(req.get_full_url()))
         ui.traceback()
         raise IOError(None, inst)
     finally:
         if ui.debugflag and ui.configbool('devel', 'debug.peer-request'):
             code = res.code if res else -1
             dbg(line % '  finished in %.4f seconds (%d)'
                 % (util.timer() - start, code))
 
     # Insert error handlers for common I/O failures.
     _wraphttpresponse(res)
 
     return res
 
 class RedirectedRepoError(error.RepoError):
     def __init__(self, msg, respurl):
         super(RedirectedRepoError, self).__init__(msg)
         self.respurl = respurl
 
 def parsev1commandresponse(ui, baseurl, requrl, qs, resp, compressible,
                            allowcbor=False):
     # record the url we got redirected to
     redirected = False
     respurl = pycompat.bytesurl(resp.geturl())
     if respurl.endswith(qs):
         respurl = respurl[:-len(qs)]
         qsdropped = False
     else:
         qsdropped = True
 
     if baseurl.rstrip('/') != respurl.rstrip('/'):
         redirected = True
         if not ui.quiet:
             ui.warn(_('real URL is %s\n') % respurl)
 
     try:
         proto = pycompat.bytesurl(resp.getheader(r'content-type', r''))
     except AttributeError:
         proto = pycompat.bytesurl(resp.headers.get(r'content-type', r''))
 
     safeurl = util.hidepassword(baseurl)
     if proto.startswith('application/hg-error'):
         raise error.OutOfBandError(resp.read())
 
     # Pre 1.0 versions of Mercurial used text/plain and
     # application/hg-changegroup. We don't support such old servers.
     if not proto.startswith('application/mercurial-'):
         ui.debug("requested URL: '%s'\n" % util.hidepassword(requrl))
         msg = _("'%s' does not appear to be an hg repository:\n"
                 "---%%<--- (%s)\n%s\n---%%<---\n") % (
             safeurl, proto or 'no content-type', resp.read(1024))
 
         # Some servers may strip the query string from the redirect. We
         # raise a special error type so callers can react to this specially.
         if redirected and qsdropped:
             raise RedirectedRepoError(msg, respurl)
         else:
             raise error.RepoError(msg)
 
     try:
         subtype = proto.split('-', 1)[1]
 
         # Unless we end up supporting CBOR in the legacy wire protocol,
         # this should ONLY be encountered for the initial capabilities
         # request during handshake.
         if subtype == 'cbor':
             if allowcbor:
                 return respurl, proto, resp
             else:
                 raise error.RepoError(_('unexpected CBOR response from '
                                         'server'))
 
         version_info = tuple([int(n) for n in subtype.split('.')])
     except ValueError:
         raise error.RepoError(_("'%s' sent a broken Content-Type "
                                 "header (%s)") % (safeurl, proto))
 
     # TODO consider switching to a decompression reader that uses
     # generators.
     if version_info == (0, 1):
         if compressible:
             resp = util.compengines['zlib'].decompressorreader(resp)
 
     elif version_info == (0, 2):
         # application/mercurial-0.2 always identifies the compression
         # engine in the payload header.
         elen = struct.unpack('B', util.readexactly(resp, 1))[0]
         ename = util.readexactly(resp, elen)
         engine = util.compengines.forwiretype(ename)
 
         resp = engine.decompressorreader(resp)
     else:
         raise error.RepoError(_("'%s' uses newer protocol %s") %
                               (safeurl, subtype))
 
     return respurl, proto, resp
 
 class httppeer(wireprotov1peer.wirepeer):
     def __init__(self, ui, path, url, opener, requestbuilder, caps):
         self.ui = ui
         self._path = path
         self._url = url
         self._caps = caps
         self._urlopener = opener
         self._requestbuilder = requestbuilder
 
     def __del__(self):
         for h in self._urlopener.handlers:
             h.close()
             getattr(h, "close_all", lambda: None)()
 
     # Begin of ipeerconnection interface.
 
     def url(self):
         return self._path
 
     def local(self):
         return None
 
     def peer(self):
         return self
 
     def canpush(self):
         return True
 
     def close(self):
         pass
 
     # End of ipeerconnection interface.
 
     # Begin of ipeercommands interface.
 
     def capabilities(self):
         return self._caps
 
     # End of ipeercommands interface.
 
     def _callstream(self, cmd, _compressible=False, **args):
         args = pycompat.byteskwargs(args)
 
         req, cu, qs = makev1commandrequest(self.ui, self._requestbuilder,
                                            self._caps, self.capable,
                                            self._url, cmd, args)
 
         resp = sendrequest(self.ui, self._urlopener, req)
 
         self._url, ct, resp = parsev1commandresponse(self.ui, self._url, cu, qs,
                                                      resp, _compressible)
 
         return resp
 
     def _call(self, cmd, **args):
         fp = self._callstream(cmd, **args)
         try:
             return fp.read()
         finally:
             # if using keepalive, allow connection to be reused
             fp.close()
 
     def _callpush(self, cmd, cg, **args):
         # have to stream bundle to a temp file because we do not have
         # http 1.1 chunked transfer.
 
         types = self.capable('unbundle')
         try:
             types = types.split(',')
         except AttributeError:
             # servers older than d1b16a746db6 will send 'unbundle' as a
             # boolean capability. They only support headerless/uncompressed
             # bundles.
             types = [""]
         for x in types:
             if x in bundle2.bundletypes:
                 type = x
                 break
 
         tempname = bundle2.writebundle(self.ui, cg, None, type)
         fp = httpconnection.httpsendfile(self.ui, tempname, "rb")
         headers = {r'Content-Type': r'application/mercurial-0.1'}
 
         try:
             r = self._call(cmd, data=fp, headers=headers, **args)
             vals = r.split('\n', 1)
             if len(vals) < 2:
                 raise error.ResponseError(_("unexpected response:"), r)
             return vals
         except urlerr.httperror:
             # Catch and re-raise these so we don't try and treat them
             # like generic socket errors. They lack any values in
             # .args on Python 3 which breaks our socket.error block.
             raise
         except socket.error as err:
             if err.args[0] in (errno.ECONNRESET, errno.EPIPE):
                 raise error.Abort(_('push failed: %s') % err.args[1])
             raise error.Abort(err.args[1])
         finally:
             fp.close()
             os.unlink(tempname)
 
     def _calltwowaystream(self, cmd, fp, **args):
         fh = None
         fp_ = None
         filename = None
         try:
             # dump bundle to disk
             fd, filename = pycompat.mkstemp(prefix="hg-bundle-", suffix=".hg")
             fh = os.fdopen(fd, r"wb")
             d = fp.read(4096)
             while d:
                 fh.write(d)
                 d = fp.read(4096)
             fh.close()
             # start http push
             fp_ = httpconnection.httpsendfile(self.ui, filename, "rb")
             headers = {r'Content-Type': r'application/mercurial-0.1'}
             return self._callstream(cmd, data=fp_, headers=headers, **args)
         finally:
             if fp_ is not None:
                 fp_.close()
             if fh is not None:
                 fh.close()
                 os.unlink(filename)
 
     def _callcompressable(self, cmd, **args):
         return self._callstream(cmd, _compressible=True, **args)
 
     def _abort(self, exception):
         raise exception
 
 def sendv2request(ui, opener, requestbuilder, apiurl, permission, requests):
     reactor = wireprotoframing.clientreactor(hasmultiplesend=False,
                                              buffersends=True)
 
     handler = wireprotov2peer.clienthandler(ui, reactor)
 
     url = '%s/%s' % (apiurl, permission)
 
     if len(requests) > 1:
         url += '/multirequest'
     else:
         url += '/%s' % requests[0][0]
 
     ui.debug('sending %d commands\n' % len(requests))
     for command, args, f in requests:
         ui.debug('sending command %s: %s\n' % (
             command, stringutil.pprint(args, indent=2)))
         assert not list(handler.callcommand(command, args, f))
 
     # TODO stream this.
     body = b''.join(map(bytes, handler.flushcommands()))
 
     # TODO modify user-agent to reflect v2
     headers = {
         r'Accept': wireprotov2server.FRAMINGTYPE,
         r'Content-Type': wireprotov2server.FRAMINGTYPE,
     }
 
     req = requestbuilder(pycompat.strurl(url), body, headers)
     req.add_unredirected_header(r'Content-Length', r'%d' % len(body))
 
     try:
         res = opener.open(req)
     except urlerr.httperror as e:
         if e.code == 401:
             raise error.Abort(_('authorization failed'))
 
         raise
     except httplib.HTTPException as e:
         ui.traceback()
         raise IOError(None, e)
 
     return handler, res
 
 class queuedcommandfuture(pycompat.futures.Future):
     """Wraps result() on command futures to trigger submission on call."""
 
     def result(self, timeout=None):
         if self.done():
             return pycompat.futures.Future.result(self, timeout)
 
         self._peerexecutor.sendcommands()
 
         # sendcommands() will restore the original __class__ and self.result
         # will resolve to Future.result.
         return self.result(timeout)
 
 @interfaceutil.implementer(repository.ipeercommandexecutor)
 class httpv2executor(object):
     def __init__(self, ui, opener, requestbuilder, apiurl, descriptor):
         self._ui = ui
         self._opener = opener
         self._requestbuilder = requestbuilder
         self._apiurl = apiurl
         self._descriptor = descriptor
         self._sent = False
         self._closed = False
         self._neededpermissions = set()
         self._calls = []
         self._futures = weakref.WeakSet()
         self._responseexecutor = None
         self._responsef = None
 
     def __enter__(self):
         return self
 
     def __exit__(self, exctype, excvalue, exctb):
         self.close()
 
     def callcommand(self, command, args):
         if self._sent:
             raise error.ProgrammingError('callcommand() cannot be used after '
                                          'commands are sent')
 
         if self._closed:
             raise error.ProgrammingError('callcommand() cannot be used after '
                                          'close()')
 
         # The service advertises which commands are available. So if we attempt
         # to call an unknown command or pass an unknown argument, we can screen
         # for this.
         if command not in self._descriptor['commands']:
             raise error.ProgrammingError(
                 'wire protocol command %s is not available' % command)
 
         cmdinfo = self._descriptor['commands'][command]
         unknownargs = set(args.keys()) - set(cmdinfo.get('args', {}))
 
         if unknownargs:
             raise error.ProgrammingError(
                 'wire protocol command %s does not accept argument: %s' % (
                     command, ', '.join(sorted(unknownargs))))
 
         self._neededpermissions |= set(cmdinfo['permissions'])
 
         # TODO we /could/ also validate types here, since the API descriptor
         # includes types...
 
         f = pycompat.futures.Future()
 
         # Monkeypatch it so result() triggers sendcommands(), otherwise result()
         # could deadlock.
         f.__class__ = queuedcommandfuture
         f._peerexecutor = self
 
         self._futures.add(f)
         self._calls.append((command, args, f))
 
         return f
 
     def sendcommands(self):
         if self._sent:
             return
 
         if not self._calls:
             return
 
         self._sent = True
 
         # Unhack any future types so caller sees a clean type and so we
         # break reference cycle.
         for f in self._futures:
             if isinstance(f, queuedcommandfuture):
                 f.__class__ = pycompat.futures.Future
                 f._peerexecutor = None
 
         # Mark the future as running and filter out cancelled futures.
         calls = [(command, args, f)
                  for command, args, f in self._calls
                  if f.set_running_or_notify_cancel()]
 
         # Clear out references, prevent improper object usage.
         self._calls = None
 
         if not calls:
             return
 
         permissions = set(self._neededpermissions)
 
         if 'push' in permissions and 'pull' in permissions:
             permissions.remove('pull')
 
         if len(permissions) > 1:
             raise error.RepoError(_('cannot make request requiring multiple '
                                     'permissions: %s') %
                                   _(', ').join(sorted(permissions)))
 
         permission = {
             'push': 'rw',
             'pull': 'ro',
         }[permissions.pop()]
 
         handler, resp = sendv2request(
             self._ui, self._opener, self._requestbuilder, self._apiurl,
             permission, calls)
 
         # TODO we probably want to validate the HTTP code, media type, etc.
 
         self._responseexecutor = pycompat.futures.ThreadPoolExecutor(1)
         self._responsef = self._responseexecutor.submit(self._handleresponse,
                                                         handler, resp)
 
     def close(self):
         if self._closed:
             return
 
         self.sendcommands()
 
         self._closed = True
 
         if not self._responsef:
             return
 
         # TODO ^C here may not result in immediate program termination.
 
         try:
             self._responsef.result()
         finally:
             self._responseexecutor.shutdown(wait=True)
             self._responsef = None
             self._responseexecutor = None
 
             # If any of our futures are still in progress, mark them as
             # errored, otherwise a result() could wait indefinitely.
             for f in self._futures:
                 if not f.done():
                     f.set_exception(error.ResponseError(
                         _('unfulfilled command response')))
 
             self._futures = None
 
     def _handleresponse(self, handler, resp):
         # Called in a thread to read the response.
 
         while handler.readframe(resp):
             pass
 
 # TODO implement interface for version 2 peers
 @interfaceutil.implementer(repository.ipeerconnection,
                            repository.ipeercapabilities,
                            repository.ipeerrequests)
 class httpv2peer(object):
     def __init__(self, ui, repourl, apipath, opener, requestbuilder,
                  apidescriptor):
         self.ui = ui
 
         if repourl.endswith('/'):
             repourl = repourl[:-1]
 
         self._url = repourl
         self._apipath = apipath
         self._apiurl = '%s/%s' % (repourl, apipath)
         self._opener = opener
         self._requestbuilder = requestbuilder
         self._descriptor = apidescriptor
 
     # Start of ipeerconnection.
 
     def url(self):
         return self._url
 
     def local(self):
         return None
 
     def peer(self):
         return self
 
     def canpush(self):
         # TODO change once implemented.
         return False
 
     def close(self):
         pass
 
     # End of ipeerconnection.
 
     # Start of ipeercapabilities.
 
     def capable(self, name):
         # The capabilities used internally historically map to capabilities
         # advertised from the "capabilities" wire protocol command. However,
         # version 2 of that command works differently.
 
         # Maps to commands that are available.
         if name in ('branchmap', 'getbundle', 'known', 'lookup', 'pushkey'):
             return True
 
         # Other concepts.
-        if name in ('bundle2',):
+        # TODO remove exchangev2 once we have a command implemented.
+        if name in ('bundle2', 'exchangev2'):
             return True
 
         # Alias command-* to presence of command of that name.
         if name.startswith('command-'):
             return name[len('command-'):] in self._descriptor['commands']
 
         return False
 
     def requirecap(self, name, purpose):
         if self.capable(name):
             return
 
         raise error.CapabilityError(
             _('cannot %s; client or remote repository does not support the %r '
               'capability') % (purpose, name))
 
     # End of ipeercapabilities.
 
     def _call(self, name, **args):
         with self.commandexecutor() as e:
             return e.callcommand(name, args).result()
 
     def commandexecutor(self):
         return httpv2executor(self.ui, self._opener, self._requestbuilder,
                               self._apiurl, self._descriptor)
 
 # Registry of API service names to metadata about peers that handle it.
 #
 # The following keys are meaningful:
 #
 # init
 #    Callable receiving (ui, repourl, servicepath, opener, requestbuilder,
 #                        apidescriptor) to create a peer.
 #
 # priority
 #    Integer priority for the service. If we could choose from multiple
 #    services, we choose the one with the highest priority.
 API_PEERS = {
     wireprototypes.HTTP_WIREPROTO_V2: {
         'init': httpv2peer,
         'priority': 50,
     },
 }
 
 def performhandshake(ui, url, opener, requestbuilder):
     # The handshake is a request to the capabilities command.
 
     caps = None
     def capable(x):
         raise error.ProgrammingError('should not be called')
 
     args = {}
 
     # The client advertises support for newer protocols by adding an
     # X-HgUpgrade-* header with a list of supported APIs and an
     # X-HgProto-* header advertising which serializing formats it supports.
     # We only support the HTTP version 2 transport and CBOR responses for
     # now.
     advertisev2 = ui.configbool('experimental', 'httppeer.advertise-v2')
 
     if advertisev2:
         args['headers'] = {
             r'X-HgProto-1': r'cbor',
         }
 
         args['headers'].update(
             encodevalueinheaders(' '.join(sorted(API_PEERS)),
                                  'X-HgUpgrade',
                                  # We don't know the header limit this early.
                                  # So make it small.
                                  1024))
 
     req, requrl, qs = makev1commandrequest(ui, requestbuilder, caps,
                                            capable, url, 'capabilities',
                                            args)
     resp = sendrequest(ui, opener, req)
 
     # The server may redirect us to the repo root, stripping the
     # ?cmd=capabilities query string from the URL. The server would likely
     # return HTML in this case and ``parsev1commandresponse()`` would raise.
     # We catch this special case and re-issue the capabilities request against
     # the new URL.
     #
     # We should ideally not do this, as a redirect that drops the query
     # string from the URL is arguably a server bug. (Garbage in, garbage out).
     # However,  Mercurial clients for several years appeared to handle this
     # issue without behavior degradation. And according to issue 5860, it may
     # be a longstanding bug in some server implementations. So we allow a
     # redirect that drops the query string to "just work."
     try:
         respurl, ct, resp = parsev1commandresponse(ui, url, requrl, qs, resp,
                                                    compressible=False,
                                                    allowcbor=advertisev2)
     except RedirectedRepoError as e:
         req, requrl, qs = makev1commandrequest(ui, requestbuilder, caps,
                                                capable, e.respurl,
                                                'capabilities', args)
         resp = sendrequest(ui, opener, req)
         respurl, ct, resp = parsev1commandresponse(ui, url, requrl, qs, resp,
                                                    compressible=False,
                                                    allowcbor=advertisev2)
 
     try:
         rawdata = resp.read()
     finally:
         resp.close()
 
     if not ct.startswith('application/mercurial-'):
         raise error.ProgrammingError('unexpected content-type: %s' % ct)
 
     if advertisev2:
         if ct == 'application/mercurial-cbor':
             try:
                 info = cborutil.decodeall(rawdata)[0]
             except cborutil.CBORDecodeError:
                 raise error.Abort(_('error decoding CBOR from remote server'),
                                   hint=_('try again and consider contacting '
                                          'the server operator'))
 
         # We got a legacy response. That's fine.
         elif ct in ('application/mercurial-0.1', 'application/mercurial-0.2'):
             info = {
                 'v1capabilities': set(rawdata.split())
             }
 
         else:
             raise error.RepoError(
                 _('unexpected response type from server: %s') % ct)
     else:
         info = {
             'v1capabilities': set(rawdata.split())
         }
 
     return respurl, info
 
 def makepeer(ui, path, opener=None, requestbuilder=urlreq.request):
     """Construct an appropriate HTTP peer instance.
 
     ``opener`` is an ``url.opener`` that should be used to establish
     connections, perform HTTP requests.
 
     ``requestbuilder`` is the type used for constructing HTTP requests.
     It exists as an argument so extensions can override the default.
     """
     u = util.url(path)
     if u.query or u.fragment:
         raise error.Abort(_('unsupported URL component: "%s"') %
                           (u.query or u.fragment))
 
     # urllib cannot handle URLs with embedded user or passwd.
     url, authinfo = u.authinfo()
     ui.debug('using %s\n' % url)
 
     opener = opener or urlmod.opener(ui, authinfo)
 
     respurl, info = performhandshake(ui, url, opener, requestbuilder)
 
     # Given the intersection of APIs that both we and the server support,
     # sort by their advertised priority and pick the first one.
     #
     # TODO consider making this request-based and interface driven. For
     # example, the caller could say "I want a peer that does X." It's quite
     # possible that not all peers would do that. Since we know the service
     # capabilities, we could filter out services not meeting the
     # requirements. Possibly by consulting the interfaces defined by the
     # peer type.
     apipeerchoices = set(info.get('apis', {}).keys()) & set(API_PEERS.keys())
 
     preferredchoices = sorted(apipeerchoices,
                               key=lambda x: API_PEERS[x]['priority'],
                               reverse=True)
 
     for service in preferredchoices:
         apipath = '%s/%s' % (info['apibase'].rstrip('/'), service)
 
         return API_PEERS[service]['init'](ui, respurl, apipath, opener,
                                           requestbuilder,
                                           info['apis'][service])
 
     # Failed to construct an API peer. Fall back to legacy.
     return httppeer(ui, path, respurl, opener, requestbuilder,
                     info['v1capabilities'])
 
 def instance(ui, path, create, intents=None, createopts=None):
     if create:
         raise error.Abort(_('cannot create new http repository'))
     try:
         if path.startswith('https:') and not urlmod.has_https:
             raise error.Abort(_('Python support for SSL and HTTPS '
                                 'is not installed'))
 
         inst = makepeer(ui, path)
 
         return inst
     except error.RepoError as httpexception:
         try:
             r = statichttprepo.instance(ui, "static-" + path, create)
             ui.note(_('(falling back to static-http)\n'))
             return r
         except error.RepoError:
             raise httpexception # use the original http RepoError instead

tests/wireprotohelpers.sh

@@ -1,58 +1,65
 HTTPV2=exp-http-v2-0001
 MEDIATYPE=application/mercurial-exp-framing-0005
 
 sendhttpraw() {
   hg --verbose debugwireproto --peer raw http://$LOCALIP:$HGPORT/
 }
 
 sendhttpv2peer() {
   hg --verbose debugwireproto --nologhandshake --peer http2 http://$LOCALIP:$HGPORT/
 }
 
 sendhttpv2peerhandshake() {
   hg --verbose debugwireproto --peer http2 http://$LOCALIP:$HGPORT/
 }
 
 cat > dummycommands.py << EOF
 from mercurial import (
     wireprototypes,
     wireprotov1server,
     wireprotov2server,
 )
 
 @wireprotov1server.wireprotocommand(b'customreadonly', permission=b'pull')
 def customreadonlyv1(repo, proto):
     return wireprototypes.bytesresponse(b'customreadonly bytes response')
 
 @wireprotov2server.wireprotocommand(b'customreadonly', permission=b'pull')
 def customreadonlyv2(repo, proto):
     yield b'customreadonly bytes response'
 
 @wireprotov1server.wireprotocommand(b'customreadwrite', permission=b'push')
 def customreadwrite(repo, proto):
     return wireprototypes.bytesresponse(b'customreadwrite bytes response')
 
 @wireprotov2server.wireprotocommand(b'customreadwrite', permission=b'push')
 def customreadwritev2(repo, proto):
     yield b'customreadwrite bytes response'
 EOF
 
 cat >> $HGRCPATH << EOF
 [extensions]
 drawdag = $TESTDIR/drawdag.py
 EOF
 
 enabledummycommands() {
   cat >> $HGRCPATH << EOF
 [extensions]
 dummycommands = $TESTTMP/dummycommands.py
 EOF
 }
 
 enablehttpv2() {
   cat >> $1/.hg/hgrc << EOF
 [experimental]
 web.apiserver = true
 web.api.http-v2 = true
 EOF
 }
+
+enablehttpv2client() {
+  cat >> $HGRCPATH << EOF
+[experimental]
+httppeer.advertise-v2 = true
+EOF
+}