run-tests: alternative way of handling \r on Windows

After f71d60da58fb all \r was stripped from output on Windows, and the places
where a \r explicitly was expected it was accepted that it was missing. Ugly
hack.

Instead we now accept that an extra \r might appear at the end of lines on
Windows. That is more to the point and less ugly.

tests/run-tests.py

@@ -1,1297 +1,1298 b''
 #!/usr/bin/env python
 #
 # run-tests.py - Run a set of tests on Mercurial
 #
 # Copyright 2006 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 # Modifying this script is tricky because it has many modes:
 #   - serial (default) vs parallel (-jN, N > 1)
 #   - no coverage (default) vs coverage (-c, -C, -s)
 #   - temp install (default) vs specific hg script (--with-hg, --local)
 #   - tests are a mix of shell scripts and Python scripts
 #
 # If you change this script, it is recommended that you ensure you
 # haven't broken it by running it in various modes with a representative
 # sample of test scripts.  For example:
 #
 #  1) serial, no coverage, temp install:
 #      ./run-tests.py test-s*
 #  2) serial, no coverage, local hg:
 #      ./run-tests.py --local test-s*
 #  3) serial, coverage, temp install:
 #      ./run-tests.py -c test-s*
 #  4) serial, coverage, local hg:
 #      ./run-tests.py -c --local test-s*      # unsupported
 #  5) parallel, no coverage, temp install:
 #      ./run-tests.py -j2 test-s*
 #  6) parallel, no coverage, local hg:
 #      ./run-tests.py -j2 --local test-s*
 #  7) parallel, coverage, temp install:
 #      ./run-tests.py -j2 -c test-s*          # currently broken
 #  8) parallel, coverage, local install:
 #      ./run-tests.py -j2 -c --local test-s*  # unsupported (and broken)
 #  9) parallel, custom tmp dir:
 #      ./run-tests.py -j2 --tmpdir /tmp/myhgtests
 #
 # (You could use any subset of the tests: test-s* happens to match
 # enough that it's worth doing parallel runs, few enough that it
 # completes fairly quickly, includes both shell and Python scripts, and
 # includes some scripts that run daemon processes.)
 
 from distutils import version
 import difflib
 import errno
 import optparse
 import os
 import shutil
 import subprocess
 import signal
 import sys
 import tempfile
 import time
 import re
 import threading
 import killdaemons as killmod
 
 processlock = threading.Lock()
 
 closefds = os.name == 'posix'
 def Popen4(cmd, wd, timeout):
     processlock.acquire()
     p = subprocess.Popen(cmd, shell=True, bufsize=-1, cwd=wd,
                          close_fds=closefds,
                          stdin=subprocess.PIPE, stdout=subprocess.PIPE,
                          stderr=subprocess.STDOUT)
     processlock.release()
 
     p.fromchild = p.stdout
     p.tochild = p.stdin
     p.childerr = p.stderr
 
     p.timeout = False
     if timeout:
         def t():
             start = time.time()
             while time.time() - start < timeout and p.returncode is None:
                 time.sleep(.1)
             p.timeout = True
             if p.returncode is None:
                 terminate(p)
         threading.Thread(target=t).start()
 
     return p
 
 # reserved exit code to skip test (used by hghave)
 SKIPPED_STATUS = 80
 SKIPPED_PREFIX = 'skipped: '
 FAILED_PREFIX  = 'hghave check failed: '
 PYTHON = sys.executable.replace('\\', '/')
 IMPL_PATH = 'PYTHONPATH'
 if 'java' in sys.platform:
     IMPL_PATH = 'JYTHONPATH'
 
 requiredtools = ["python", "diff", "grep", "unzip", "gunzip", "bunzip2", "sed"]
 
 defaults = {
     'jobs': ('HGTEST_JOBS', 1),
     'timeout': ('HGTEST_TIMEOUT', 180),
     'port': ('HGTEST_PORT', 20059),
     'shell': ('HGTEST_SHELL', 'sh'),
 }
 
 def parselistfiles(files, listtype, warn=True):
     entries = dict()
     for filename in files:
         try:
             path = os.path.expanduser(os.path.expandvars(filename))
             f = open(path, "r")
         except IOError, err:
             if err.errno != errno.ENOENT:
                 raise
             if warn:
                 print "warning: no such %s file: %s" % (listtype, filename)
             continue
 
         for line in f.readlines():
             line = line.split('#', 1)[0].strip()
             if line:
                 entries[line] = filename
 
         f.close()
     return entries
 
 def parseargs():
     parser = optparse.OptionParser("%prog [options] [tests]")
 
     # keep these sorted
     parser.add_option("--blacklist", action="append",
         help="skip tests listed in the specified blacklist file")
     parser.add_option("--whitelist", action="append",
         help="always run tests listed in the specified whitelist file")
     parser.add_option("-C", "--annotate", action="store_true",
         help="output files annotated with coverage")
     parser.add_option("--child", type="int",
         help="run as child process, summary to given fd")
     parser.add_option("-c", "--cover", action="store_true",
         help="print a test coverage report")
     parser.add_option("-d", "--debug", action="store_true",
         help="debug mode: write output of test scripts to console"
              " rather than capturing and diff'ing it (disables timeout)")
     parser.add_option("-f", "--first", action="store_true",
         help="exit on the first test failure")
     parser.add_option("-H", "--htmlcov", action="store_true",
         help="create an HTML report of the coverage of the files")
     parser.add_option("--inotify", action="store_true",
         help="enable inotify extension when running tests")
     parser.add_option("-i", "--interactive", action="store_true",
         help="prompt to accept changed output")
     parser.add_option("-j", "--jobs", type="int",
         help="number of jobs to run in parallel"
              " (default: $%s or %d)" % defaults['jobs'])
     parser.add_option("--keep-tmpdir", action="store_true",
         help="keep temporary directory after running tests")
     parser.add_option("-k", "--keywords",
         help="run tests matching keywords")
     parser.add_option("-l", "--local", action="store_true",
         help="shortcut for --with-hg=<testdir>/../hg")
     parser.add_option("-n", "--nodiff", action="store_true",
         help="skip showing test changes")
     parser.add_option("-p", "--port", type="int",
         help="port on which servers should listen"
              " (default: $%s or %d)" % defaults['port'])
     parser.add_option("--pure", action="store_true",
         help="use pure Python code instead of C extensions")
     parser.add_option("-R", "--restart", action="store_true",
         help="restart at last error")
     parser.add_option("-r", "--retest", action="store_true",
         help="retest failed tests")
     parser.add_option("-S", "--noskips", action="store_true",
         help="don't report skip tests verbosely")
     parser.add_option("--shell", type="string",
         help="shell to use (default: $%s or %s)" % defaults['shell'])
     parser.add_option("-t", "--timeout", type="int",
         help="kill errant tests after TIMEOUT seconds"
              " (default: $%s or %d)" % defaults['timeout'])
     parser.add_option("--tmpdir", type="string",
         help="run tests in the given temporary directory"
              " (implies --keep-tmpdir)")
     parser.add_option("-v", "--verbose", action="store_true",
         help="output verbose messages")
     parser.add_option("--view", type="string",
         help="external diff viewer")
     parser.add_option("--with-hg", type="string",
         metavar="HG",
         help="test using specified hg script rather than a "
              "temporary installation")
     parser.add_option("-3", "--py3k-warnings", action="store_true",
         help="enable Py3k warnings on Python 2.6+")
     parser.add_option('--extra-config-opt', action="append",
                       help='set the given config opt in the test hgrc')
 
     for option, (envvar, default) in defaults.items():
         defaults[option] = type(default)(os.environ.get(envvar, default))
     parser.set_defaults(**defaults)
     (options, args) = parser.parse_args()
 
     # jython is always pure
     if 'java' in sys.platform or '__pypy__' in sys.modules:
         options.pure = True
 
     if options.with_hg:
         options.with_hg = os.path.expanduser(options.with_hg)
         if not (os.path.isfile(options.with_hg) and
                 os.access(options.with_hg, os.X_OK)):
             parser.error('--with-hg must specify an executable hg script')
         if not os.path.basename(options.with_hg) == 'hg':
             sys.stderr.write('warning: --with-hg should specify an hg script\n')
     if options.local:
         testdir = os.path.dirname(os.path.realpath(sys.argv[0]))
         hgbin = os.path.join(os.path.dirname(testdir), 'hg')
         if os.name != 'nt' and not os.access(hgbin, os.X_OK):
             parser.error('--local specified, but %r not found or not executable'
                          % hgbin)
         options.with_hg = hgbin
 
     options.anycoverage = options.cover or options.annotate or options.htmlcov
     if options.anycoverage:
         try:
             import coverage
             covver = version.StrictVersion(coverage.__version__).version
             if covver < (3, 3):
                 parser.error('coverage options require coverage 3.3 or later')
         except ImportError:
             parser.error('coverage options now require the coverage package')
 
     if options.anycoverage and options.local:
         # this needs some path mangling somewhere, I guess
         parser.error("sorry, coverage options do not work when --local "
                      "is specified")
 
     global vlog
     if options.verbose:
         if options.jobs > 1 or options.child is not None:
             pid = "[%d]" % os.getpid()
         else:
             pid = None
         def vlog(*msg):
             iolock.acquire()
             if pid:
                 print pid,
             for m in msg:
                 print m,
             print
             sys.stdout.flush()
             iolock.release()
     else:
         vlog = lambda *msg: None
 
     if options.tmpdir:
         options.tmpdir = os.path.expanduser(options.tmpdir)
 
     if options.jobs < 1:
         parser.error('--jobs must be positive')
     if options.interactive and options.jobs > 1:
         print '(--interactive overrides --jobs)'
         options.jobs = 1
     if options.interactive and options.debug:
         parser.error("-i/--interactive and -d/--debug are incompatible")
     if options.debug:
         if options.timeout != defaults['timeout']:
             sys.stderr.write(
                 'warning: --timeout option ignored with --debug\n')
         options.timeout = 0
     if options.py3k_warnings:
         if sys.version_info[:2] < (2, 6) or sys.version_info[:2] >= (3, 0):
             parser.error('--py3k-warnings can only be used on Python 2.6+')
     if options.blacklist:
         options.blacklist = parselistfiles(options.blacklist, 'blacklist')
     if options.whitelist:
         options.whitelisted = parselistfiles(options.whitelist, 'whitelist',
                                              warn=options.child is None)
     else:
         options.whitelisted = {}
 
     return (options, args)
 
 def rename(src, dst):
     """Like os.rename(), trade atomicity and opened files friendliness
     for existing destination support.
     """
     shutil.copy(src, dst)
     os.remove(src)
 
 def parsehghaveoutput(lines):
     '''Parse hghave log lines.
     Return tuple of lists (missing, failed):
       * the missing/unknown features
       * the features for which existence check failed'''
     missing = []
     failed = []
     for line in lines:
         if line.startswith(SKIPPED_PREFIX):
             line = line.splitlines()[0]
             missing.append(line[len(SKIPPED_PREFIX):])
         elif line.startswith(FAILED_PREFIX):
             line = line.splitlines()[0]
             failed.append(line[len(FAILED_PREFIX):])
 
     return missing, failed
 
 def showdiff(expected, output, ref, err):
     print
     for line in difflib.unified_diff(expected, output, ref, err):
         sys.stdout.write(line)
 
 def findprogram(program):
     """Search PATH for a executable program"""
     for p in os.environ.get('PATH', os.defpath).split(os.pathsep):
         name = os.path.join(p, program)
         if os.name == 'nt' or os.access(name, os.X_OK):
             return name
     return None
 
 def checktools():
     # Before we go any further, check for pre-requisite tools
     # stuff from coreutils (cat, rm, etc) are not tested
     for p in requiredtools:
         if os.name == 'nt':
             p += '.exe'
         found = findprogram(p)
         if found:
             vlog("# Found prerequisite", p, "at", found)
         else:
             print "WARNING: Did not find prerequisite tool: "+p
 
 def terminate(proc):
     """Terminate subprocess (with fallback for Python versions < 2.6)"""
     vlog('# Terminating process %d' % proc.pid)
     try:
         getattr(proc, 'terminate', lambda : os.kill(proc.pid, signal.SIGTERM))()
     except OSError:
         pass
 
 def killdaemons():
     return killmod.killdaemons(DAEMON_PIDS, tryhard=False, remove=True,
                                logfn=vlog)
 
 def cleanup(options):
     if not options.keep_tmpdir:
         vlog("# Cleaning up HGTMP", HGTMP)
         shutil.rmtree(HGTMP, True)
 
 def usecorrectpython():
     # some tests run python interpreter. they must use same
     # interpreter we use or bad things will happen.
     exedir, exename = os.path.split(sys.executable)
     if exename in ('python', 'python.exe'):
         path = findprogram(exename)
         if os.path.dirname(path) == exedir:
             return
     else:
         exename = 'python'
     vlog('# Making python executable in test path use correct Python')
     mypython = os.path.join(BINDIR, exename)
     try:
         os.symlink(sys.executable, mypython)
     except AttributeError:
         # windows fallback
         shutil.copyfile(sys.executable, mypython)
         shutil.copymode(sys.executable, mypython)
 
 def installhg(options):
     vlog("# Performing temporary installation of HG")
     installerrs = os.path.join("tests", "install.err")
     pure = options.pure and "--pure" or ""
 
     # Run installer in hg root
     script = os.path.realpath(sys.argv[0])
     hgroot = os.path.dirname(os.path.dirname(script))
     os.chdir(hgroot)
     nohome = '--home=""'
     if os.name == 'nt':
         # The --home="" trick works only on OS where os.sep == '/'
         # because of a distutils convert_path() fast-path. Avoid it at
         # least on Windows for now, deal with .pydistutils.cfg bugs
         # when they happen.
         nohome = ''
     cmd = ('%s setup.py %s clean --all'
            ' build --build-base="%s"'
            ' install --force --prefix="%s" --install-lib="%s"'
            ' --install-scripts="%s" %s >%s 2>&1'
            % (sys.executable, pure, os.path.join(HGTMP, "build"),
               INST, PYTHONDIR, BINDIR, nohome, installerrs))
     vlog("# Running", cmd)
     if os.system(cmd) == 0:
         if not options.verbose:
             os.remove(installerrs)
     else:
         f = open(installerrs)
         for line in f:
             print line,
         f.close()
         sys.exit(1)
     os.chdir(TESTDIR)
 
     usecorrectpython()
 
     vlog("# Installing dummy diffstat")
     f = open(os.path.join(BINDIR, 'diffstat'), 'w')
     f.write('#!' + sys.executable + '\n'
             'import sys\n'
             'files = 0\n'
             'for line in sys.stdin:\n'
             '    if line.startswith("diff "):\n'
             '        files += 1\n'
             'sys.stdout.write("files patched: %d\\n" % files)\n')
     f.close()
     os.chmod(os.path.join(BINDIR, 'diffstat'), 0700)
 
     if options.py3k_warnings and not options.anycoverage:
         vlog("# Updating hg command to enable Py3k Warnings switch")
         f = open(os.path.join(BINDIR, 'hg'), 'r')
         lines = [line.rstrip() for line in f]
         lines[0] += ' -3'
         f.close()
         f = open(os.path.join(BINDIR, 'hg'), 'w')
         for line in lines:
             f.write(line + '\n')
         f.close()
 
     hgbat = os.path.join(BINDIR, 'hg.bat')
     if os.path.isfile(hgbat):
         # hg.bat expects to be put in bin/scripts while run-tests.py
         # installation layout put it in bin/ directly. Fix it
         f = open(hgbat, 'rb')
         data = f.read()
         f.close()
         if '"%~dp0..\python" "%~dp0hg" %*' in data:
             data = data.replace('"%~dp0..\python" "%~dp0hg" %*',
                                 '"%~dp0python" "%~dp0hg" %*')
             f = open(hgbat, 'wb')
             f.write(data)
             f.close()
         else:
             print 'WARNING: cannot fix hg.bat reference to python.exe'
 
     if options.anycoverage:
         custom = os.path.join(TESTDIR, 'sitecustomize.py')
         target = os.path.join(PYTHONDIR, 'sitecustomize.py')
         vlog('# Installing coverage trigger to %s' % target)
         shutil.copyfile(custom, target)
         rc = os.path.join(TESTDIR, '.coveragerc')
         vlog('# Installing coverage rc to %s' % rc)
         os.environ['COVERAGE_PROCESS_START'] = rc
         fn = os.path.join(INST, '..', '.coverage')
         os.environ['COVERAGE_FILE'] = fn
 
 def outputcoverage(options):
 
     vlog('# Producing coverage report')
     os.chdir(PYTHONDIR)
 
     def covrun(*args):
         cmd = 'coverage %s' % ' '.join(args)
         vlog('# Running: %s' % cmd)
         os.system(cmd)
 
     if options.child:
         return
 
     covrun('-c')
     omit = ','.join(os.path.join(x, '*') for x in [BINDIR, TESTDIR])
     covrun('-i', '-r', '"--omit=%s"' % omit) # report
     if options.htmlcov:
         htmldir = os.path.join(TESTDIR, 'htmlcov')
         covrun('-i', '-b', '"--directory=%s"' % htmldir, '"--omit=%s"' % omit)
     if options.annotate:
         adir = os.path.join(TESTDIR, 'annotated')
         if not os.path.isdir(adir):
             os.mkdir(adir)
         covrun('-i', '-a', '"--directory=%s"' % adir, '"--omit=%s"' % omit)
 
 def pytest(test, wd, options, replacements):
     py3kswitch = options.py3k_warnings and ' -3' or ''
     cmd = '%s%s "%s"' % (PYTHON, py3kswitch, test)
     vlog("# Running", cmd)
     return run(cmd, wd, options, replacements)
 
 def shtest(test, wd, options, replacements):
     cmd = '%s "%s"' % (options.shell, test)
     vlog("# Running", cmd)
     return run(cmd, wd, options, replacements)
 
 needescape = re.compile(r'[\x00-\x08\x0b-\x1f\x7f-\xff]').search
 escapesub = re.compile(r'[\x00-\x08\x0b-\x1f\\\x7f-\xff]').sub
 escapemap = dict((chr(i), r'\x%02x' % i) for i in range(256))
 escapemap.update({'\\': '\\\\', '\r': r'\r'})
 def escapef(m):
     return escapemap[m.group(0)]
 def stringescape(s):
     return escapesub(escapef, s)
 
 def rematch(el, l):
     try:
-        # ensure that the regex matches to the end of the string
-        return re.match(el + r'\Z', l)
+        # use \Z to ensure that the regex matches to the end of the string
+        if os.name == 'nt':
+            return re.match(el + r'\r?\n\Z', l)
+        return re.match(el + r'\n\Z', l)
     except re.error:
         # el is an invalid regex
         return False
 
 def globmatch(el, l):
     # The only supported special characters are * and ? plus / which also
     # matches \ on windows. Escaping of these caracters is supported.
     i, n = 0, len(el)
     res = ''
     while i < n:
         c = el[i]
         i += 1
         if c == '\\' and el[i] in '*?\\/':
             res += el[i - 1:i + 1]
             i += 1
         elif c == '*':
             res += '.*'
         elif c == '?':
             res += '.'
         elif c == '/' and os.name == 'nt':
             res += '[/\\\\]'
         else:
             res += re.escape(c)
     return rematch(res, l)
 
 def linematch(el, l):
     if el == l: # perfect match (fast)
         return True
     if (el and
-        (el.endswith(" (re)\n") and rematch(el[:-6] + '\n', l) or
-         el.endswith(" (glob)\n") and globmatch(el[:-8] + '\n', l) or
+        (el.endswith(" (re)\n") and rematch(el[:-6], l) or
+         el.endswith(" (glob)\n") and globmatch(el[:-8], l) or
          el.endswith(" (esc)\n") and
              (el[:-7].decode('string-escape') + '\n' == l or
-              el[:-7].decode('string-escape').replace('\r', '') +
-                  '\n' == l and os.name == 'nt'))):
+              os.name == 'nt' and
+              el[:-7].decode('string-escape') + '\n' == l))):
         return True
     return False
 
 def tsttest(test, wd, options, replacements):
     # We generate a shell script which outputs unique markers to line
     # up script results with our source. These markers include input
     # line number and the last return code
     salt = "SALT" + str(time.time())
     def addsalt(line, inpython):
         if inpython:
             script.append('%s %d 0\n' % (salt, line))
         else:
             script.append('echo %s %s $?\n' % (salt, line))
 
     # After we run the shell script, we re-unify the script output
     # with non-active parts of the source, with synchronization by our
     # SALT line number markers. The after table contains the
     # non-active components, ordered by line number
     after = {}
     pos = prepos = -1
 
     # Expected shellscript output
     expected = {}
 
     # We keep track of whether or not we're in a Python block so we
     # can generate the surrounding doctest magic
     inpython = False
 
     # True or False when in a true or false conditional section
     skipping = None
 
     def hghave(reqs):
         # TODO: do something smarter when all other uses of hghave is gone
         tdir = TESTDIR.replace('\\', '/')
         proc = Popen4('%s -c "%s/hghave %s"' %
                       (options.shell, tdir, ' '.join(reqs)), wd, 0)
         proc.communicate()
         ret = proc.wait()
         if wifexited(ret):
             ret = os.WEXITSTATUS(ret)
         return ret == 0
 
     f = open(test)
     t = f.readlines()
     f.close()
 
     script = []
     if options.debug:
         script.append('set -x\n')
     if os.getenv('MSYSTEM'):
         script.append('alias pwd="pwd -W"\n')
     for n, l in enumerate(t):
         if not l.endswith('\n'):
             l += '\n'
         if l.startswith('#if'):
             if skipping is not None:
                 after.setdefault(pos, []).append('  !!! nested #if\n')
             skipping = not hghave(l.split()[1:])
             after.setdefault(pos, []).append(l)
         elif l.startswith('#else'):
             if skipping is None:
                 after.setdefault(pos, []).append('  !!! missing #if\n')
             skipping = not skipping
             after.setdefault(pos, []).append(l)
         elif l.startswith('#endif'):
             if skipping is None:
                 after.setdefault(pos, []).append('  !!! missing #if\n')
             skipping = None
             after.setdefault(pos, []).append(l)
         elif skipping:
             after.setdefault(pos, []).append(l)
         elif l.startswith('  >>> '): # python inlines
             after.setdefault(pos, []).append(l)
             prepos = pos
             pos = n
             if not inpython:
                 # we've just entered a Python block, add the header
                 inpython = True
                 addsalt(prepos, False) # make sure we report the exit code
                 script.append('%s -m heredoctest <<EOF\n' % PYTHON)
             addsalt(n, True)
             script.append(l[2:])
         elif l.startswith('  ... '): # python inlines
             after.setdefault(prepos, []).append(l)
             script.append(l[2:])
         elif l.startswith('  $ '): # commands
             if inpython:
                 script.append("EOF\n")
                 inpython = False
             after.setdefault(pos, []).append(l)
             prepos = pos
             pos = n
             addsalt(n, False)
             cmd = l[4:].split()
             if len(cmd) == 2 and cmd[0] == 'cd':
                 l = '  $ cd %s || exit 1\n' % cmd[1]
             script.append(l[4:])
         elif l.startswith('  > '): # continuations
             after.setdefault(prepos, []).append(l)
             script.append(l[4:])
         elif l.startswith('  '): # results
             # queue up a list of expected results
             expected.setdefault(pos, []).append(l[2:])
         else:
             if inpython:
                 script.append("EOF\n")
                 inpython = False
             # non-command/result - queue up for merged output
             after.setdefault(pos, []).append(l)
 
     if inpython:
         script.append("EOF\n")
     if skipping is not None:
         after.setdefault(pos, []).append('  !!! missing #endif\n')
     addsalt(n + 1, False)
 
     # Write out the script and execute it
     fd, name = tempfile.mkstemp(suffix='hg-tst')
     try:
         for l in script:
             os.write(fd, l)
         os.close(fd)
 
         cmd = '%s "%s"' % (options.shell, name)
         vlog("# Running", cmd)
         exitcode, output = run(cmd, wd, options, replacements)
         # do not merge output if skipped, return hghave message instead
         # similarly, with --debug, output is None
         if exitcode == SKIPPED_STATUS or output is None:
             return exitcode, output
     finally:
         os.remove(name)
 
     # Merge the script output back into a unified test
 
     pos = -1
     postout = []
     ret = 0
     for l in output:
         lout, lcmd = l, None
         if salt in l:
             lout, lcmd = l.split(salt, 1)
 
         if lout:
             if not lout.endswith('\n'):
                 lout += ' (no-eol)\n'
 
             # find the expected output at the current position
             el = None
             if pos in expected and expected[pos]:
                 el = expected[pos].pop(0)
 
             if linematch(el, lout):
                 postout.append("  " + el)
             else:
                 if needescape(lout):
                     lout = stringescape(lout.rstrip('\n')) + " (esc)\n"
                 postout.append("  " + lout) # let diff deal with it
 
         if lcmd:
             # add on last return code
             ret = int(lcmd.split()[1])
             if ret != 0:
                 postout.append("  [%s]\n" % ret)
             if pos in after:
                 # merge in non-active test bits
                 postout += after.pop(pos)
             pos = int(lcmd.split()[0])
 
     if pos in after:
         postout += after.pop(pos)
 
     return exitcode, postout
 
 wifexited = getattr(os, "WIFEXITED", lambda x: False)
 def run(cmd, wd, options, replacements):
     """Run command in a sub-process, capturing the output (stdout and stderr).
     Return a tuple (exitcode, output).  output is None in debug mode."""
     # TODO: Use subprocess.Popen if we're running on Python 2.4
     if options.debug:
         proc = subprocess.Popen(cmd, shell=True, cwd=wd)
         ret = proc.wait()
         return (ret, None)
 
     proc = Popen4(cmd, wd, options.timeout)
     def cleanup():
         terminate(proc)
         ret = proc.wait()
         if ret == 0:
             ret = signal.SIGTERM << 8
         killdaemons()
         return ret
 
     output = ''
     proc.tochild.close()
 
     try:
         output = proc.fromchild.read()
     except KeyboardInterrupt:
         vlog('# Handling keyboard interrupt')
         cleanup()
         raise
 
     ret = proc.wait()
     if wifexited(ret):
         ret = os.WEXITSTATUS(ret)
 
     if proc.timeout:
         ret = 'timeout'
 
     if ret:
         killdaemons()
 
     for s, r in replacements:
         output = re.sub(s, r, output)
     return ret, output.splitlines(True)
 
 def runone(options, test):
     '''tristate output:
     None -> skipped
     True -> passed
     False -> failed'''
 
     global results, resultslock, iolock
 
     testpath = os.path.join(TESTDIR, test)
 
     def result(l, e):
         resultslock.acquire()
         results[l].append(e)
         resultslock.release()
 
     def skip(msg):
         if not options.verbose:
             result('s', (test, msg))
         else:
             iolock.acquire()
             print "\nSkipping %s: %s" % (testpath, msg)
             iolock.release()
         return None
 
     def fail(msg, ret):
         if not options.nodiff:
             iolock.acquire()
             print "\nERROR: %s %s" % (testpath, msg)
             iolock.release()
         if (not ret and options.interactive
             and os.path.exists(testpath + ".err")):
             iolock.acquire()
             print "Accept this change? [n] ",
             answer = sys.stdin.readline().strip()
             iolock.release()
             if answer.lower() in "y yes".split():
                 if test.endswith(".t"):
                     rename(testpath + ".err", testpath)
                 else:
                     rename(testpath + ".err", testpath + ".out")
                 result('p', test)
                 return
         result('f', (test, msg))
 
     def success():
         result('p', test)
 
     def ignore(msg):
         result('i', (test, msg))
 
     if (os.path.basename(test).startswith("test-") and '~' not in test and
         ('.' not in test or test.endswith('.py') or
          test.endswith('.bat') or test.endswith('.t'))):
         if not os.path.exists(test):
             skip("doesn't exist")
             return None
     else:
         vlog('# Test file', test, 'not supported, ignoring')
         return None # not a supported test, don't record
 
     if not (options.whitelisted and test in options.whitelisted):
         if options.blacklist and test in options.blacklist:
             skip("blacklisted")
             return None
 
         if options.retest and not os.path.exists(test + ".err"):
             ignore("not retesting")
             return None
 
         if options.keywords:
             fp = open(test)
             t = fp.read().lower() + test.lower()
             fp.close()
             for k in options.keywords.lower().split():
                 if k in t:
                     break
                 else:
                     ignore("doesn't match keyword")
                     return None
 
     vlog("# Test", test)
 
     # create a fresh hgrc
     hgrc = open(HGRCPATH, 'w+')
     hgrc.write('[ui]\n')
     hgrc.write('slash = True\n')
     hgrc.write('[defaults]\n')
     hgrc.write('backout = -d "0 0"\n')
     hgrc.write('commit = -d "0 0"\n')
     hgrc.write('tag = -d "0 0"\n')
     if options.inotify:
         hgrc.write('[extensions]\n')
         hgrc.write('inotify=\n')
         hgrc.write('[inotify]\n')
         hgrc.write('pidfile=%s\n' % DAEMON_PIDS)
         hgrc.write('appendpid=True\n')
     if options.extra_config_opt:
         for opt in options.extra_config_opt:
             section, key = opt.split('.', 1)
             assert '=' in key, ('extra config opt %s must '
                                 'have an = for assignment' % opt)
             hgrc.write('[%s]\n%s\n' % (section, key))
     hgrc.close()
 
     ref = os.path.join(TESTDIR, test+".out")
     err = os.path.join(TESTDIR, test+".err")
     if os.path.exists(err):
         os.remove(err)       # Remove any previous output files
     try:
         tf = open(testpath)
         firstline = tf.readline().rstrip()
         tf.close()
     except IOError:
         firstline = ''
     lctest = test.lower()
 
     if lctest.endswith('.py') or firstline == '#!/usr/bin/env python':
         runner = pytest
     elif lctest.endswith('.t'):
         runner = tsttest
         ref = testpath
     else:
         # do not try to run non-executable programs
         if not os.access(testpath, os.X_OK):
             return skip("not executable")
         runner = shtest
 
     # Make a tmp subdirectory to work in
     testtmp = os.environ["TESTTMP"] = os.environ["HOME"] = \
         os.path.join(HGTMP, os.path.basename(test))
 
     replacements = [
         (r':%s\b' % options.port, ':$HGPORT'),
         (r':%s\b' % (options.port + 1), ':$HGPORT1'),
         (r':%s\b' % (options.port + 2), ':$HGPORT2'),
         ]
     if os.name == 'nt':
-        replacements.append((r'\r\n', '\n'))
         replacements.append(
             (''.join(c.isalpha() and '[%s%s]' % (c.lower(), c.upper()) or
                      c in '/\\' and r'[/\\]' or
                      c.isdigit() and c or
                      '\\' + c
                      for c in testtmp), '$TESTTMP'))
     else:
         replacements.append((re.escape(testtmp), '$TESTTMP'))
 
     os.mkdir(testtmp)
     ret, out = runner(testpath, testtmp, options, replacements)
     vlog("# Ret was:", ret)
 
     mark = '.'
 
     skipped = (ret == SKIPPED_STATUS)
 
     # If we're not in --debug mode and reference output file exists,
     # check test output against it.
     if options.debug:
         refout = None                   # to match "out is None"
     elif os.path.exists(ref):
         f = open(ref, "r")
         refout = f.read().splitlines(True)
         f.close()
     else:
         refout = []
 
     if (ret != 0 or out != refout) and not skipped and not options.debug:
         # Save errors to a file for diagnosis
         f = open(err, "wb")
         for line in out:
             f.write(line)
         f.close()
 
     def describe(ret):
         if ret < 0:
             return 'killed by signal %d' % -ret
         return 'returned error code %d' % ret
 
     if skipped:
         mark = 's'
         if out is None:                 # debug mode: nothing to parse
             missing = ['unknown']
             failed = None
         else:
             missing, failed = parsehghaveoutput(out)
         if not missing:
             missing = ['irrelevant']
         if failed:
             fail("hghave failed checking for %s" % failed[-1], ret)
             skipped = False
         else:
             skip(missing[-1])
     elif ret == 'timeout':
         mark = 't'
         fail("timed out", ret)
     elif out != refout:
         mark = '!'
         if not options.nodiff:
             iolock.acquire()
             if options.view:
                 os.system("%s %s %s" % (options.view, ref, err))
             else:
                 showdiff(refout, out, ref, err)
             iolock.release()
         if ret:
             fail("output changed and " + describe(ret), ret)
         else:
             fail("output changed", ret)
         ret = 1
     elif ret:
         mark = '!'
         fail(describe(ret), ret)
     else:
         success()
 
     if not options.verbose:
         iolock.acquire()
         sys.stdout.write(mark)
         sys.stdout.flush()
         iolock.release()
 
     killdaemons()
 
     if not options.keep_tmpdir:
         shutil.rmtree(testtmp, True)
     if skipped:
         return None
     return ret == 0
 
 _hgpath = None
 
 def _gethgpath():
     """Return the path to the mercurial package that is actually found by
     the current Python interpreter."""
     global _hgpath
     if _hgpath is not None:
         return _hgpath
 
     cmd = '%s -c "import mercurial; print mercurial.__path__[0]"'
     pipe = os.popen(cmd % PYTHON)
     try:
         _hgpath = pipe.read().strip()
     finally:
         pipe.close()
     return _hgpath
 
 def _checkhglib(verb):
     """Ensure that the 'mercurial' package imported by python is
     the one we expect it to be.  If not, print a warning to stderr."""
     expecthg = os.path.join(PYTHONDIR, 'mercurial')
     actualhg = _gethgpath()
     if os.path.abspath(actualhg) != os.path.abspath(expecthg):
         sys.stderr.write('warning: %s with unexpected mercurial lib: %s\n'
                          '         (expected %s)\n'
                          % (verb, actualhg, expecthg))
 
 def runchildren(options, tests):
     if INST:
         installhg(options)
         _checkhglib("Testing")
 
     optcopy = dict(options.__dict__)
     optcopy['jobs'] = 1
 
     # Because whitelist has to override keyword matches, we have to
     # actually load the whitelist in the children as well, so we allow
     # the list of whitelist files to pass through and be parsed in the
     # children, but not the dict of whitelisted tests resulting from
     # the parse, used here to override blacklisted tests.
     whitelist = optcopy['whitelisted'] or []
     del optcopy['whitelisted']
 
     blacklist = optcopy['blacklist'] or []
     del optcopy['blacklist']
     blacklisted = []
 
     if optcopy['with_hg'] is None:
         optcopy['with_hg'] = os.path.join(BINDIR, "hg")
     optcopy.pop('anycoverage', None)
 
     opts = []
     for opt, value in optcopy.iteritems():
         name = '--' + opt.replace('_', '-')
         if value is True:
             opts.append(name)
         elif isinstance(value, list):
             for v in value:
                 opts.append(name + '=' + str(v))
         elif value is not None:
             opts.append(name + '=' + str(value))
 
     tests.reverse()
     jobs = [[] for j in xrange(options.jobs)]
     while tests:
         for job in jobs:
             if not tests:
                 break
             test = tests.pop()
             if test not in whitelist and test in blacklist:
                 blacklisted.append(test)
             else:
                 job.append(test)
     fps = {}
 
     for j, job in enumerate(jobs):
         if not job:
             continue
         rfd, wfd = os.pipe()
         childopts = ['--child=%d' % wfd, '--port=%d' % (options.port + j * 3)]
         childtmp = os.path.join(HGTMP, 'child%d' % j)
         childopts += ['--tmpdir', childtmp]
         cmdline = [PYTHON, sys.argv[0]] + opts + childopts + job
         vlog(' '.join(cmdline))
         fps[os.spawnvp(os.P_NOWAIT, cmdline[0], cmdline)] = os.fdopen(rfd, 'r')
         os.close(wfd)
     signal.signal(signal.SIGINT, signal.SIG_IGN)
     failures = 0
     tested, skipped, failed = 0, 0, 0
     skips = []
     fails = []
     while fps:
         pid, status = os.wait()
         fp = fps.pop(pid)
         l = fp.read().splitlines()
         try:
             test, skip, fail = map(int, l[:3])
         except ValueError:
             test, skip, fail = 0, 0, 0
         split = -fail or len(l)
         for s in l[3:split]:
             skips.append(s.split(" ", 1))
         for s in l[split:]:
             fails.append(s.split(" ", 1))
         tested += test
         skipped += skip
         failed += fail
         vlog('pid %d exited, status %d' % (pid, status))
         failures |= status
     print
     skipped += len(blacklisted)
     if not options.noskips:
         for s in skips:
             print "Skipped %s: %s" % (s[0], s[1])
         for s in blacklisted:
             print "Skipped %s: blacklisted" % s
     for s in fails:
         print "Failed %s: %s" % (s[0], s[1])
 
     _checkhglib("Tested")
     print "# Ran %d tests, %d skipped, %d failed." % (
         tested, skipped, failed)
 
     if options.anycoverage:
         outputcoverage(options)
     sys.exit(failures != 0)
 
 results = dict(p=[], f=[], s=[], i=[])
 resultslock = threading.Lock()
 iolock = threading.Lock()
 
 def runqueue(options, tests, results):
     for test in tests:
         ret = runone(options, test)
         if options.first and ret is not None and not ret:
             break
 
 def runtests(options, tests):
     global DAEMON_PIDS, HGRCPATH
     DAEMON_PIDS = os.environ["DAEMON_PIDS"] = os.path.join(HGTMP, 'daemon.pids')
     HGRCPATH = os.environ["HGRCPATH"] = os.path.join(HGTMP, '.hgrc')
 
     try:
         if INST:
             installhg(options)
             _checkhglib("Testing")
 
         if options.restart:
             orig = list(tests)
             while tests:
                 if os.path.exists(tests[0] + ".err"):
                     break
                 tests.pop(0)
             if not tests:
                 print "running all tests"
                 tests = orig
 
         runqueue(options, tests, results)
 
         failed = len(results['f'])
         tested = len(results['p']) + failed
         skipped = len(results['s'])
         ignored = len(results['i'])
 
         if options.child:
             fp = os.fdopen(options.child, 'w')
             fp.write('%d\n%d\n%d\n' % (tested, skipped, failed))
             for s in results['s']:
                 fp.write("%s %s\n" % s)
             for s in results['f']:
                 fp.write("%s %s\n" % s)
             fp.close()
         else:
             print
             for s in results['s']:
                 print "Skipped %s: %s" % s
             for s in results['f']:
                 print "Failed %s: %s" % s
             _checkhglib("Tested")
             print "# Ran %d tests, %d skipped, %d failed." % (
                 tested, skipped + ignored, failed)
 
         if options.anycoverage:
             outputcoverage(options)
     except KeyboardInterrupt:
         failed = True
         print "\ninterrupted!"
 
     if failed:
         sys.exit(1)
 
 def main():
     (options, args) = parseargs()
     if not options.child:
         os.umask(022)
 
         checktools()
 
     if len(args) == 0:
         args = os.listdir(".")
     args.sort()
 
     tests = args
 
     # Reset some environment variables to well-known values so that
     # the tests produce repeatable output.
     os.environ['LANG'] = os.environ['LC_ALL'] = os.environ['LANGUAGE'] = 'C'
     os.environ['TZ'] = 'GMT'
     os.environ["EMAIL"] = "Foo Bar <[e-mail]>"
     os.environ['CDPATH'] = ''
     os.environ['COLUMNS'] = '80'
     os.environ['GREP_OPTIONS'] = ''
     os.environ['http_proxy'] = ''
     os.environ['no_proxy'] = ''
     os.environ['NO_PROXY'] = ''
     os.environ['TERM'] = 'xterm'
 
     # unset env related to hooks
     for k in os.environ.keys():
         if k.startswith('HG_'):
             # can't remove on solaris
             os.environ[k] = ''
             del os.environ[k]
     if 'HG' in os.environ:
         # can't remove on solaris
         os.environ['HG'] = ''
         del os.environ['HG']
 
     global TESTDIR, HGTMP, INST, BINDIR, PYTHONDIR, COVERAGE_FILE
     TESTDIR = os.environ["TESTDIR"] = os.getcwd()
     if options.tmpdir:
         options.keep_tmpdir = True
         tmpdir = options.tmpdir
         if os.path.exists(tmpdir):
             # Meaning of tmpdir has changed since 1.3: we used to create
             # HGTMP inside tmpdir; now HGTMP is tmpdir.  So fail if
             # tmpdir already exists.
             sys.exit("error: temp dir %r already exists" % tmpdir)
 
             # Automatically removing tmpdir sounds convenient, but could
             # really annoy anyone in the habit of using "--tmpdir=/tmp"
             # or "--tmpdir=$HOME".
             #vlog("# Removing temp dir", tmpdir)
             #shutil.rmtree(tmpdir)
         os.makedirs(tmpdir)
     else:
         d = None
         if os.name == 'nt':
             # without this, we get the default temp dir location, but
             # in all lowercase, which causes troubles with paths (issue3490)
             d = os.getenv('TMP')
         tmpdir = tempfile.mkdtemp('', 'hgtests.', d)
     HGTMP = os.environ['HGTMP'] = os.path.realpath(tmpdir)
     DAEMON_PIDS = None
     HGRCPATH = None
 
     os.environ["HGEDITOR"] = sys.executable + ' -c "import sys; sys.exit(0)"'
     os.environ["HGMERGE"] = "internal:merge"
     os.environ["HGUSER"]   = "test"
     os.environ["HGENCODING"] = "ascii"
     os.environ["HGENCODINGMODE"] = "strict"
     os.environ["HGPORT"] = str(options.port)
     os.environ["HGPORT1"] = str(options.port + 1)
     os.environ["HGPORT2"] = str(options.port + 2)
 
     if options.with_hg:
         INST = None
         BINDIR = os.path.dirname(os.path.realpath(options.with_hg))
 
         # This looks redundant with how Python initializes sys.path from
         # the location of the script being executed.  Needed because the
         # "hg" specified by --with-hg is not the only Python script
         # executed in the test suite that needs to import 'mercurial'
         # ... which means it's not really redundant at all.
         PYTHONDIR = BINDIR
     else:
         INST = os.path.join(HGTMP, "install")
         BINDIR = os.environ["BINDIR"] = os.path.join(INST, "bin")
         PYTHONDIR = os.path.join(INST, "lib", "python")
 
     os.environ["BINDIR"] = BINDIR
     os.environ["PYTHON"] = PYTHON
 
     if not options.child:
         path = [BINDIR] + os.environ["PATH"].split(os.pathsep)
         os.environ["PATH"] = os.pathsep.join(path)
 
         # Include TESTDIR in PYTHONPATH so that out-of-tree extensions
         # can run .../tests/run-tests.py test-foo where test-foo
         # adds an extension to HGRC
         pypath = [PYTHONDIR, TESTDIR]
         # We have to augment PYTHONPATH, rather than simply replacing
         # it, in case external libraries are only available via current
         # PYTHONPATH.  (In particular, the Subversion bindings on OS X
         # are in /opt/subversion.)
         oldpypath = os.environ.get(IMPL_PATH)
         if oldpypath:
             pypath.append(oldpypath)
         os.environ[IMPL_PATH] = os.pathsep.join(pypath)
 
     COVERAGE_FILE = os.path.join(TESTDIR, ".coverage")
 
     vlog("# Using TESTDIR", TESTDIR)
     vlog("# Using HGTMP", HGTMP)
     vlog("# Using PATH", os.environ["PATH"])
     vlog("# Using", IMPL_PATH, os.environ[IMPL_PATH])
 
     try:
         if len(tests) > 1 and options.jobs > 1:
             runchildren(options, tests)
         else:
             runtests(options, tests)
     finally:
         time.sleep(.1)
         cleanup(options)
 
 if __name__ == '__main__':
     main()

tests/test-run-tests.t

@@ -1,99 +1,109 b''
 Simple commands:
 
   $ echo foo
   foo
   $ printf 'oh no'
   oh no (no-eol)
   $ printf 'bar\nbaz\n' | cat
   bar
   baz
 
 Multi-line command:
 
   $ foo() {
   >     echo bar
   > }
   $ foo
   bar
 
 Return codes before inline python:
 
   $ sh -c 'exit 1'
   [1]
 
 Doctest commands:
 
   >>> print 'foo'
   foo
   $ echo interleaved
   interleaved
   >>> for c in 'xyz':
   ...     print c
   x
   y
   z
   >>> print
   
 
 Regular expressions:
 
   $ echo foobarbaz
   foobar.* (re)
   $ echo barbazquux
   .*quux.* (re)
 
 Globs:
 
   $ printf '* \\foobarbaz {10}\n'
   \* \\fo?bar* {10} (glob)
 
 Literal match ending in " (re)":
 
   $ echo 'foo (re)'
   foo (re)
 
+Windows: \r\n is handled like \n and can be escaped:
+
+#if windows
+  $ printf 'crlf\r\ncr\r\tcrlf\r\ncrcrlf\r\r\n'
+  crlf
+  cr\r (no-eol) (esc)
+  \tcrlf (esc)
+  crcrlf\r (esc)
+#endif
+
 testing hghave
 
   $ "$TESTDIR/hghave" true
   $ "$TESTDIR/hghave" false
   skipped: missing feature: nail clipper
   [1]
   $ "$TESTDIR/hghave" no-true
   skipped: system supports yak shaving
   [1]
   $ "$TESTDIR/hghave" no-false
 
 Conditional sections based on hghave:
 
 #if true
   $ echo tested
   tested
 #else
   $ echo skipped
 #endif
 
 #if false
   $ echo skipped
 #else
   $ echo tested
   tested
 #endif
 
 #if no-false
   $ echo tested
   tested
 #else
   $ echo skipped
 #endif
 
 #if no-true
   $ echo skipped
 #else
   $ echo tested
   tested
 #endif
 
 Exit code:
 
   $ (exit 1)
   [1]