patchbomb: use reST syntax for literal blocks

hgext/patchbomb.py

@@ -1,501 +1,501 b''
 # patchbomb.py - sending Mercurial changesets as patch emails
 #
 #  Copyright 2005-2009 Matt Mackall <[e-mail]> and others
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2, incorporated herein by reference.
 
 '''command to send changesets as (a series of) patch emails
 
 The series is started off with a "[PATCH 0 of N]" introduction, which
 describes the series as a whole.
 
 Each patch email has a Subject line of "[PATCH M of N] ...", using the first
 line of the changeset description as the subject text. The message contains
 two or three body parts:
 
   The changeset description.
 
   [Optional] The result of running diffstat on the patch.
 
   The patch itself, as generated by "hg export".
 
 Each message refers to the first in the series using the In-Reply-To and
 References headers, so they will show up as a sequence in threaded mail and
 news readers, and in mail archives.
 
 With the -d/--diffstat option, you will be prompted for each changeset with a
 diffstat summary and the changeset summary, so you can be sure you are sending
 the right changes.
 
-To configure other defaults, add a section like this to your hgrc file:
+To configure other defaults, add a section like this to your hgrc file::
 
   [email]
   from = My Name <my@email>
   to = recipient1, recipient2, ...
   cc = cc1, cc2, ...
   bcc = bcc1, bcc2, ...
 
 Then you can use the "hg email" command to mail a series of changesets as a
 patchbomb.
 
 To avoid sending patches prematurely, it is a good idea to first run the
 "email" command with the "-n" option (test only). You will be prompted for an
 email recipient address, a subject and an introductory message describing the
 patches of your patchbomb. Then when all is done, patchbomb messages are
 displayed. If the PAGER environment variable is set, your pager will be fired
 up once for each patchbomb message, so you can verify everything is alright.
 
 The -m/--mbox option is also very useful. Instead of previewing each patchbomb
 message in a pager or sending the messages directly, it will create a UNIX
 mailbox file with the patch emails. This mailbox file can be previewed with
-any mail user agent which supports UNIX mbox files, e.g. with mutt:
+any mail user agent which supports UNIX mbox files, e.g. with mutt::
 
   % mutt -R -f mbox
 
 When you are previewing the patchbomb messages, you can use `formail' (a
 utility that is commonly installed as part of the procmail package), to send
-each message out:
+each message out::
 
   % formail -s sendmail -bm -t < mbox
 
 That should be all. Now your patchbomb is on its way out.
 
 You can also either configure the method option in the email section to be a
 sendmail compatible mailer or fill out the [smtp] section so that the
 patchbomb extension can automatically send patchbombs directly from the
 commandline. See the [email] and [smtp] sections in hgrc(5) for details.
 '''
 
 import os, errno, socket, tempfile, cStringIO, time
 import email.MIMEMultipart, email.MIMEBase
 import email.Utils, email.Encoders, email.Generator
 from mercurial import cmdutil, commands, hg, mail, patch, util
 from mercurial.i18n import _
 from mercurial.node import bin
 
 def prompt(ui, prompt, default=None, rest=': ', empty_ok=False):
     if not ui.interactive():
         return default
     if default:
         prompt += ' [%s]' % default
     prompt += rest
     while True:
         r = ui.prompt(prompt, default=default)
         if r:
             return r
         if default is not None:
             return default
         if empty_ok:
             return r
         ui.warn(_('Please enter a valid value.\n'))
 
 def cdiffstat(ui, summary, patchlines):
     s = patch.diffstat(patchlines)
     if summary:
         ui.write(summary, '\n')
         ui.write(s, '\n')
     ans = prompt(ui, _('does the diffstat above look okay? '), 'y')
     if not ans.lower().startswith('y'):
         raise util.Abort(_('diffstat rejected'))
     return s
 
 def makepatch(ui, repo, patch, opts, _charsets, idx, total, patchname=None):
 
     desc = []
     node = None
     body = ''
 
     for line in patch:
         if line.startswith('#'):
             if line.startswith('# Node ID'):
                 node = line.split()[-1]
             continue
         if line.startswith('diff -r') or line.startswith('diff --git'):
             break
         desc.append(line)
 
     if not patchname and not node:
         raise ValueError
 
     if opts.get('attach'):
         body = ('\n'.join(desc[1:]).strip() or
                 'Patch subject is complete summary.')
         body += '\n\n\n'
 
     if opts.get('plain'):
         while patch and patch[0].startswith('# '):
             patch.pop(0)
         if patch:
             patch.pop(0)
         while patch and not patch[0].strip():
             patch.pop(0)
 
     if opts.get('diffstat'):
         body += cdiffstat(ui, '\n'.join(desc), patch) + '\n\n'
 
     if opts.get('attach') or opts.get('inline'):
         msg = email.MIMEMultipart.MIMEMultipart()
         if body:
             msg.attach(mail.mimeencode(ui, body, _charsets, opts.get('test')))
         p = mail.mimetextpatch('\n'.join(patch), 'x-patch', opts.get('test'))
         binnode = bin(node)
         # if node is mq patch, it will have the patch file's name as a tag
         if not patchname:
             patchtags = [t for t in repo.nodetags(binnode)
                          if t.endswith('.patch') or t.endswith('.diff')]
             if patchtags:
                 patchname = patchtags[0]
             elif total > 1:
                 patchname = cmdutil.make_filename(repo, '%b-%n.patch',
                                                   binnode, seqno=idx, total=total)
             else:
                 patchname = cmdutil.make_filename(repo, '%b.patch', binnode)
         disposition = 'inline'
         if opts.get('attach'):
             disposition = 'attachment'
         p['Content-Disposition'] = disposition + '; filename=' + patchname
         msg.attach(p)
     else:
         body += '\n'.join(patch)
         msg = mail.mimetextpatch(body, display=opts.get('test'))
 
     subj = desc[0].strip().rstrip('. ')
     if total == 1 and not opts.get('intro'):
         subj = '[PATCH] ' + (opts.get('subject') or subj)
     else:
         tlen = len(str(total))
         subj = '[PATCH %0*d of %d] %s' % (tlen, idx, total, subj)
     msg['Subject'] = mail.headencode(ui, subj, _charsets, opts.get('test'))
     msg['X-Mercurial-Node'] = node
     return msg, subj
 
 def patchbomb(ui, repo, *revs, **opts):
     '''send changesets by email
 
     By default, diffs are sent in the format generated by hg export, one per
     message. The series starts with a "[PATCH 0 of N]" introduction, which
     describes the series as a whole.
 
     Each patch email has a Subject line of "[PATCH M of N] ...", using the
     first line of the changeset description as the subject text. The message
     contains two or three parts. First, the changeset description. Next,
     (optionally) if the diffstat program is installed and -d/--diffstat is
     used, the result of running diffstat on the patch. Finally, the patch
     itself, as generated by "hg export".
 
     By default the patch is included as text in the email body for easy
     reviewing. Using the -a/--attach option will instead create an attachment
     for the patch. With -i/--inline an inline attachment will be created.
 
     With -o/--outgoing, emails will be generated for patches not found in the
     destination repository (or only those which are ancestors of the specified
     revisions if any are provided)
 
     With -b/--bundle, changesets are selected as for --outgoing, but a single
     email containing a binary Mercurial bundle as an attachment will be sent.
 
     Examples:
 
     hg email -r 3000          # send patch 3000 only
     hg email -r 3000 -r 3001  # send patches 3000 and 3001
     hg email -r 3000:3005     # send patches 3000 through 3005
     hg email 3000             # send patch 3000 (deprecated)
 
     hg email -o               # send all patches not in default
     hg email -o DEST          # send all patches not in DEST
     hg email -o -r 3000       # send all ancestors of 3000 not in default
     hg email -o -r 3000 DEST  # send all ancestors of 3000 not in DEST
 
     hg email -b               # send bundle of all patches not in default
     hg email -b DEST          # send bundle of all patches not in DEST
     hg email -b -r 3000       # bundle of all ancestors of 3000 not in default
     hg email -b -r 3000 DEST  # bundle of all ancestors of 3000 not in DEST
 
     Before using this command, you will need to enable email in your hgrc. See
     the [email] section in hgrc(5) for details.
     '''
 
     _charsets = mail._charsets(ui)
 
     def outgoing(dest, revs):
         '''Return the revisions present locally but not in dest'''
         dest = ui.expandpath(dest or 'default-push', dest or 'default')
         revs = [repo.lookup(rev) for rev in revs]
         other = hg.repository(cmdutil.remoteui(repo, opts), dest)
         ui.status(_('comparing with %s\n') % dest)
         o = repo.findoutgoing(other)
         if not o:
             ui.status(_("no changes found\n"))
             return []
         o = repo.changelog.nodesbetween(o, revs or None)[0]
         return [str(repo.changelog.rev(r)) for r in o]
 
     def getpatches(revs):
         for r in cmdutil.revrange(repo, revs):
             output = cStringIO.StringIO()
             patch.export(repo, [r], fp=output,
                          opts=patch.diffopts(ui, opts))
             yield output.getvalue().split('\n')
 
     def getbundle(dest):
         tmpdir = tempfile.mkdtemp(prefix='hg-email-bundle-')
         tmpfn = os.path.join(tmpdir, 'bundle')
         try:
             commands.bundle(ui, repo, tmpfn, dest, **opts)
             return open(tmpfn, 'rb').read()
         finally:
             try:
                 os.unlink(tmpfn)
             except:
                 pass
             os.rmdir(tmpdir)
 
     if not (opts.get('test') or opts.get('mbox')):
         # really sending
         mail.validateconfig(ui)
 
     if not (revs or opts.get('rev')
             or opts.get('outgoing') or opts.get('bundle')
             or opts.get('patches')):
         raise util.Abort(_('specify at least one changeset with -r or -o'))
 
     if opts.get('outgoing') and opts.get('bundle'):
         raise util.Abort(_("--outgoing mode always on with --bundle;"
                            " do not re-specify --outgoing"))
 
     if opts.get('outgoing') or opts.get('bundle'):
         if len(revs) > 1:
             raise util.Abort(_("too many destinations"))
         dest = revs and revs[0] or None
         revs = []
 
     if opts.get('rev'):
         if revs:
             raise util.Abort(_('use only one form to specify the revision'))
         revs = opts.get('rev')
 
     if opts.get('outgoing'):
         revs = outgoing(dest, opts.get('rev'))
     if opts.get('bundle'):
         opts['revs'] = revs
 
     # start
     if opts.get('date'):
         start_time = util.parsedate(opts.get('date'))
     else:
         start_time = util.makedate()
 
     def genmsgid(id):
         return '<%s.%s@%s>' % (id[:20], int(start_time[0]), socket.getfqdn())
 
     def getdescription(body, sender):
         if opts.get('desc'):
             body = open(opts.get('desc')).read()
         else:
             ui.write(_('\nWrite the introductory message for the '
                        'patch series.\n\n'))
             body = ui.edit(body, sender)
         return body
 
     def getpatchmsgs(patches, patchnames=None):
         jumbo = []
         msgs = []
 
         ui.write(_('This patch series consists of %d patches.\n\n')
                  % len(patches))
 
         name = None
         for i, p in enumerate(patches):
             jumbo.extend(p)
             if patchnames:
                 name = patchnames[i]
             msg = makepatch(ui, repo, p, opts, _charsets, i + 1,
                             len(patches), name)
             msgs.append(msg)
 
         if len(patches) > 1 or opts.get('intro'):
             tlen = len(str(len(patches)))
 
             subj = '[PATCH %0*d of %d] %s' % (
                 tlen, 0, len(patches),
                 opts.get('subject') or
                 prompt(ui, 'Subject:',
                        rest=' [PATCH %0*d of %d] ' % (tlen, 0, len(patches))))
 
             body = ''
             if opts.get('diffstat'):
                 d = cdiffstat(ui, _('Final summary:\n'), jumbo)
                 if d:
                     body = '\n' + d
 
             body = getdescription(body, sender)
             msg = mail.mimeencode(ui, body, _charsets, opts.get('test'))
             msg['Subject'] = mail.headencode(ui, subj, _charsets,
                                              opts.get('test'))
 
             msgs.insert(0, (msg, subj))
         return msgs
 
     def getbundlemsgs(bundle):
         subj = (opts.get('subject')
                 or prompt(ui, 'Subject:', 'A bundle for your repository'))
 
         body = getdescription('', sender)
         msg = email.MIMEMultipart.MIMEMultipart()
         if body:
             msg.attach(mail.mimeencode(ui, body, _charsets, opts.get('test')))
         datapart = email.MIMEBase.MIMEBase('application', 'x-mercurial-bundle')
         datapart.set_payload(bundle)
         bundlename = '%s.hg' % opts.get('bundlename', 'bundle')
         datapart.add_header('Content-Disposition', 'attachment',
                             filename=bundlename)
         email.Encoders.encode_base64(datapart)
         msg.attach(datapart)
         msg['Subject'] = mail.headencode(ui, subj, _charsets, opts.get('test'))
         return [(msg, subj)]
 
     sender = (opts.get('from') or ui.config('email', 'from') or
               ui.config('patchbomb', 'from') or
               prompt(ui, 'From', ui.username()))
 
     # internal option used by pbranches
     patches = opts.get('patches')
     if patches:
         msgs = getpatchmsgs(patches, opts.get('patchnames'))
     elif opts.get('bundle'):
         msgs = getbundlemsgs(getbundle(dest))
     else:
         msgs = getpatchmsgs(list(getpatches(revs)))
 
     def getaddrs(opt, prpt, default = None):
         addrs = opts.get(opt) or (ui.config('email', opt) or
                                   ui.config('patchbomb', opt) or
                                   prompt(ui, prpt, default)).split(',')
         return [mail.addressencode(ui, a.strip(), _charsets, opts.get('test'))
                 for a in addrs if a.strip()]
 
     to = getaddrs('to', 'To')
     cc = getaddrs('cc', 'Cc', '')
 
     bcc = opts.get('bcc') or (ui.config('email', 'bcc') or
                           ui.config('patchbomb', 'bcc') or '').split(',')
     bcc = [mail.addressencode(ui, a.strip(), _charsets, opts.get('test'))
            for a in bcc if a.strip()]
 
     ui.write('\n')
 
     parent = opts.get('in_reply_to') or None
     # angle brackets may be omitted, they're not semantically part of the msg-id
     if parent is not None:
         if not parent.startswith('<'):
             parent = '<' + parent
         if not parent.endswith('>'):
             parent += '>'
 
     first = True
 
     sender_addr = email.Utils.parseaddr(sender)[1]
     sender = mail.addressencode(ui, sender, _charsets, opts.get('test'))
     sendmail = None
     for m, subj in msgs:
         try:
             m['Message-Id'] = genmsgid(m['X-Mercurial-Node'])
         except TypeError:
             m['Message-Id'] = genmsgid('patchbomb')
         if parent:
             m['In-Reply-To'] = parent
             m['References'] = parent
         if first:
             parent = m['Message-Id']
             first = False
 
         m['User-Agent'] = 'Mercurial-patchbomb/%s' % util.version()
         m['Date'] = email.Utils.formatdate(start_time[0], localtime=True)
 
         start_time = (start_time[0] + 1, start_time[1])
         m['From'] = sender
         m['To'] = ', '.join(to)
         if cc:
             m['Cc']  = ', '.join(cc)
         if bcc:
             m['Bcc'] = ', '.join(bcc)
         if opts.get('test'):
             ui.status(_('Displaying '), subj, ' ...\n')
             ui.flush()
             if 'PAGER' in os.environ:
                 fp = util.popen(os.environ['PAGER'], 'w')
             else:
                 fp = ui
             generator = email.Generator.Generator(fp, mangle_from_=False)
             try:
                 generator.flatten(m, 0)
                 fp.write('\n')
             except IOError, inst:
                 if inst.errno != errno.EPIPE:
                     raise
             if fp is not ui:
                 fp.close()
         elif opts.get('mbox'):
             ui.status(_('Writing '), subj, ' ...\n')
             fp = open(opts.get('mbox'), 'In-Reply-To' in m and 'ab+' or 'wb+')
             generator = email.Generator.Generator(fp, mangle_from_=True)
             date = time.ctime(start_time[0])
             fp.write('From %s %s\n' % (sender_addr, date))
             generator.flatten(m, 0)
             fp.write('\n\n')
             fp.close()
         else:
             if not sendmail:
                 sendmail = mail.connect(ui)
             ui.status(_('Sending '), subj, ' ...\n')
             # Exim does not remove the Bcc field
             del m['Bcc']
             fp = cStringIO.StringIO()
             generator = email.Generator.Generator(fp, mangle_from_=False)
             generator.flatten(m, 0)
             sendmail(sender, to + bcc + cc, fp.getvalue())
 
 emailopts = [
           ('a', 'attach', None, _('send patches as attachments')),
           ('i', 'inline', None, _('send patches as inline attachments')),
           ('', 'bcc', [], _('email addresses of blind carbon copy recipients')),
           ('c', 'cc', [], _('email addresses of copy recipients')),
           ('d', 'diffstat', None, _('add diffstat output to messages')),
           ('', 'date', '', _('use the given date as the sending date')),
           ('', 'desc', '', _('use the given file as the series description')),
           ('f', 'from', '', _('email address of sender')),
           ('n', 'test', None, _('print messages that would be sent')),
           ('m', 'mbox', '',
            _('write messages to mbox file instead of sending them')),
           ('s', 'subject', '',
            _('subject of first message (intro or single patch)')),
           ('', 'in-reply-to', '',
            _('message identifier to reply to')),
           ('t', 'to', [], _('email addresses of recipients')),
          ]
 
 
 cmdtable = {
     "email":
         (patchbomb,
          [('g', 'git', None, _('use git extended diff format')),
           ('', 'plain', None, _('omit hg patch header')),
           ('o', 'outgoing', None,
            _('send changes not found in the target repository')),
           ('b', 'bundle', None,
            _('send changes not in target as a binary bundle')),
           ('', 'bundlename', 'bundle',
            _('name of the bundle attachment file')),
           ('r', 'rev', [], _('a revision to send')),
           ('', 'force', None,
            _('run even when remote repository is unrelated '
              '(with -b/--bundle)')),
           ('', 'base', [],
            _('a base changeset to specify instead of a destination '
              '(with -b/--bundle)')),
           ('', 'intro', None,
            _('send an introduction email for a single patch')),
          ] + emailopts + commands.remoteopts,
          _('hg email [OPTION]... [DEST]...'))
 }