phases: properly register excluded changeset when revision are specified

There was no other drawback than a bad UI message for now.

mercurial/discovery.py

@@ -1,239 +1,239
 # discovery.py - protocol changeset discovery functions
 #
 # Copyright 2010 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from node import nullid, short
 from i18n import _
 import util, setdiscovery, treediscovery, phases
 
 def findcommonincoming(repo, remote, heads=None, force=False):
     """Return a tuple (common, anyincoming, heads) used to identify the common
     subset of nodes between repo and remote.
 
     "common" is a list of (at least) the heads of the common subset.
     "anyincoming" is testable as a boolean indicating if any nodes are missing
       locally. If remote does not support getbundle, this actually is a list of
       roots of the nodes that would be incoming, to be supplied to
       changegroupsubset. No code except for pull should be relying on this fact
       any longer.
     "heads" is either the supplied heads, or else the remote's heads.
 
     If you pass heads and they are all known locally, the reponse lists justs
     these heads in "common" and in "heads".
 
     Please use findcommonoutgoing to compute the set of outgoing nodes to give
     extensions a good hook into outgoing.
     """
 
     if not remote.capable('getbundle'):
         return treediscovery.findcommonincoming(repo, remote, heads, force)
 
     if heads:
         allknown = True
         nm = repo.changelog.nodemap
         for h in heads:
             if nm.get(h) is None:
                 allknown = False
                 break
         if allknown:
             return (heads, False, heads)
 
     res = setdiscovery.findcommonheads(repo.ui, repo, remote,
                                        abortwhenunrelated=not force)
     common, anyinc, srvheads = res
     return (list(common), anyinc, heads or list(srvheads))
 
 class outgoing(object):
     '''Represents the set of nodes present in a local repo but not in a
     (possibly) remote one.
 
     Members:
 
       missing is a list of all nodes present in local but not in remote.
       common is a list of all nodes shared between the two repos.
       excluded is the list of missing changeset that shouldn't be sent remotely.
       missingheads is the list of heads of missing.
       commonheads is the list of heads of common.
 
     The sets are computed on demand from the heads, unless provided upfront
     by discovery.'''
 
     def __init__(self, revlog, commonheads, missingheads):
         self.commonheads = commonheads
         self.missingheads = missingheads
         self._revlog = revlog
         self._common = None
         self._missing = None
         self.excluded = []
 
     def _computecommonmissing(self):
         sets = self._revlog.findcommonmissing(self.commonheads,
                                               self.missingheads)
         self._common, self._missing = sets
 
     @util.propertycache
     def common(self):
         if self._common is None:
             self._computecommonmissing()
         return self._common
 
     @util.propertycache
     def missing(self):
         if self._missing is None:
             self._computecommonmissing()
         return self._missing
 
 def findcommonoutgoing(repo, other, onlyheads=None, force=False, commoninc=None):
     '''Return an outgoing instance to identify the nodes present in repo but
     not in other.
 
     If onlyheads is given, only nodes ancestral to nodes in onlyheads (inclusive)
     are included. If you already know the local repo's heads, passing them in
     onlyheads is faster than letting them be recomputed here.
 
     If commoninc is given, it must the the result of a prior call to
     findcommonincoming(repo, other, force) to avoid recomputing it here.'''
     # declare an empty outgoing object to be filled later
     og = outgoing(repo.changelog, None, None)
 
     # get common set if not provided
     if commoninc is None:
         commoninc = findcommonincoming(repo, other, force=force)
     og.commonheads, _any, _hds = commoninc
 
     # compute outgoing
     if not repo._phaseroots[phases.secret]:
         og.missingheads = onlyheads or repo.heads()
     elif onlyheads is None:
         # use visible heads as it should be cached
         og.missingheads = phases.visibleheads(repo)
         og.excluded = [ctx.node() for ctx in repo.set('secret()')]
     else:
         # compute common, missing and exclude secret stuff
         sets = repo.changelog.findcommonmissing(og.commonheads, onlyheads)
         og._common, allmissing = sets
         og._missing = missing = []
-        og._excluded = excluded = []
+        og.excluded = excluded = []
         for node in allmissing:
             if repo[node].phase() >= phases.secret:
                 excluded.append(node)
             else:
                 missing.append(node)
         if excluded:
             # update missing heads
             rset = repo.set('heads(%ln)', missing)
             missingheads = [ctx.node() for ctx in rset]
         else:
             missingheads = onlyheads
         og.missingheads = missingheads
 
     return og
 
 def checkheads(repo, remote, outgoing, remoteheads, newbranch=False):
     """Check that a push won't add any outgoing head
 
     raise Abort error and display ui message as needed.
     """
     if remoteheads == [nullid]:
         # remote is empty, nothing to check.
         return
 
     cl = repo.changelog
     if remote.capable('branchmap'):
         # Check for each named branch if we're creating new remote heads.
         # To be a remote head after push, node must be either:
         # - unknown locally
         # - a local outgoing head descended from update
         # - a remote head that's known locally and not
         #   ancestral to an outgoing head
 
         # 1. Create set of branches involved in the push.
         branches = set(repo[n].branch() for n in outgoing.missing)
 
         # 2. Check for new branches on the remote.
         remotemap = remote.branchmap()
         newbranches = branches - set(remotemap)
         if newbranches and not newbranch: # new branch requires --new-branch
             branchnames = ', '.join(sorted(newbranches))
             raise util.Abort(_("push creates new remote branches: %s!")
                                % branchnames,
                              hint=_("use 'hg push --new-branch' to create"
                                     " new remote branches"))
         branches.difference_update(newbranches)
 
         # 3. Construct the initial oldmap and newmap dicts.
         # They contain information about the remote heads before and
         # after the push, respectively.
         # Heads not found locally are not included in either dict,
         # since they won't be affected by the push.
         # unsynced contains all branches with incoming changesets.
         oldmap = {}
         newmap = {}
         unsynced = set()
         for branch in branches:
             remotebrheads = remotemap[branch]
             prunedbrheads = [h for h in remotebrheads if h in cl.nodemap]
             oldmap[branch] = prunedbrheads
             newmap[branch] = list(prunedbrheads)
             if len(remotebrheads) > len(prunedbrheads):
                 unsynced.add(branch)
 
         # 4. Update newmap with outgoing changes.
         # This will possibly add new heads and remove existing ones.
         ctxgen = (repo[n] for n in outgoing.missing)
         repo._updatebranchcache(newmap, ctxgen)
 
     else:
         # 1-4b. old servers: Check for new topological heads.
         # Construct {old,new}map with branch = None (topological branch).
         # (code based on _updatebranchcache)
         oldheads = set(h for h in remoteheads if h in cl.nodemap)
         newheads = oldheads.union(outg)
         if len(newheads) > 1:
             for latest in reversed(outg):
                 if latest not in newheads:
                     continue
                 minhrev = min(cl.rev(h) for h in newheads)
                 reachable = cl.reachable(latest, cl.node(minhrev))
                 reachable.remove(latest)
                 newheads.difference_update(reachable)
         branches = set([None])
         newmap = {None: newheads}
         oldmap = {None: oldheads}
         unsynced = inc and branches or set()
 
     # 5. Check for new heads.
     # If there are more heads after the push than before, a suitable
     # error message, depending on unsynced status, is displayed.
     error = None
     for branch in branches:
         newhs = set(newmap[branch])
         oldhs = set(oldmap[branch])
         if len(newhs) > len(oldhs):
             dhs = list(newhs - oldhs)
             if error is None:
                 if branch not in ('default', None):
                     error = _("push creates new remote head %s "
                               "on branch '%s'!") % (short(dhs[0]), branch)
                 else:
                     error = _("push creates new remote head %s!"
                               ) % short(dhs[0])
                 if branch in unsynced:
                     hint = _("you should pull and merge or "
                              "use push -f to force")
                 else:
                     hint = _("did you forget to merge? "
                              "use push -f to force")
             if branch is not None:
                 repo.ui.note(_("new remote heads on branch '%s'\n") % branch)
             for h in dhs:
                 repo.ui.note(_("new remote head %s\n") % short(h))
     if error:
         raise util.Abort(error, hint=hint)
 
     # 6. Check for unsynced changes on involved branches.
     if unsynced:
         repo.ui.warn(_("note: unsynced remote changes!\n"))

tests/test-mq-safety.t

@@ -1,182 +1,182
   $ echo '[extensions]' >> $HGRCPATH
   $ echo 'mq =' >> $HGRCPATH
 
   $ hg init repo
   $ cd repo
 
   $ echo foo > foo
   $ hg ci -qAm 'add a file'
 
   $ hg qinit
 
   $ hg qnew foo
   $ echo foo >> foo
   $ hg qrefresh -m 'append foo'
 
   $ hg qnew bar
   $ echo bar >> foo
   $ hg qrefresh -m 'append bar'
 
 
 try to commit on top of a patch
 
   $ echo quux >> foo
   $ hg ci -m 'append quux'
   abort: cannot commit over an applied mq patch
   [255]
 
 
 cheat a bit...
 
   $ mv .hg/patches .hg/patches2
   $ hg ci -m 'append quux'
   $ mv .hg/patches2 .hg/patches
 
 
 qpop/qrefresh on the wrong revision
 
   $ hg qpop
   abort: popping would remove a revision not managed by this patch queue
   [255]
   $ hg qpop -n patches
   using patch queue: $TESTTMP/repo/.hg/patches (glob)
   abort: popping would remove a revision not managed by this patch queue
   [255]
   $ hg qrefresh
   abort: working directory revision is not qtip
   [255]
 
   $ hg up -C qtip
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg qpop
   abort: popping would remove a revision not managed by this patch queue
   [255]
   $ hg qrefresh
   abort: cannot refresh a revision with children
   [255]
   $ hg tip --template '{rev} {desc}\n'
   3 append quux
 
 
 qpush warning branchheads
 
   $ cd ..
   $ hg init branchy
   $ cd branchy
   $ echo q > q
   $ hg add q
   $ hg qnew -f qp
   $ hg qpop
   popping qp
   patch queue now empty
   $ echo a > a
   $ hg ci -Ama
   adding a
   $ hg up null
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ hg branch b
   marked working directory as branch b
   (branches are permanent and global, did you want a bookmark?)
   $ echo c > c
   $ hg ci -Amc
   adding c
   $ hg merge default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   (branch merge, don't forget to commit)
   $ hg ci -mmerge
   $ hg up default
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ hg log
   changeset:   2:65309210bf4e
   branch:      b
   tag:         tip
   parent:      1:707adb4c8ae1
   parent:      0:cb9a9f314b8b
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     merge
   
   changeset:   1:707adb4c8ae1
   branch:      b
   parent:      -1:000000000000
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     c
   
   changeset:   0:cb9a9f314b8b
   user:        test
   date:        Thu Jan 01 00:00:00 1970 +0000
   summary:     a
   
   $ hg qpush
   applying qp
   now at: qp
 
 Testing applied patches, push and --force
 
   $ cd ..
   $ hg init forcepush
   $ cd forcepush
   $ echo a > a
   $ hg ci -Am adda
   adding a
   $ echo a >> a
   $ hg ci -m changea
   $ hg up 0
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg branch branch
   marked working directory as branch branch
   (branches are permanent and global, did you want a bookmark?)
   $ echo b > b
   $ hg ci -Am addb
   adding b
   $ hg up 0
   0 files updated, 0 files merged, 1 files removed, 0 files unresolved
   $ hg --cwd .. clone -r 0 forcepush forcepush2
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
   updating to branch default
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ echo a >> a
   $ hg qnew patch
 
 Pushing applied patch with --rev without --force
 
   $ hg push -r default ../forcepush2
   pushing to ../forcepush2
   abort: source has mq patches applied
   [255]
 
 Pushing applied patch with branchhash, without --force
 
   $ hg push ../forcepush2#default
   pushing to ../forcepush2
   abort: source has mq patches applied
   [255]
 
 Pushing revs excluding applied patch
 
   $ hg push --new-branch -r branch -r 2 ../forcepush2
   pushing to ../forcepush2
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
 
 Pushing applied patch with --force
 
   $ hg push --force -r default ../forcepush2
   pushing to ../forcepush2
   searching for changes
-  no changes found
+  no changes to push but 1 secret changesets
   $ hg phase -d 'mq()'
   $ hg push --force -r default ../forcepush2
   pushing to ../forcepush2
   searching for changes
   adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files (+1 heads)