changegroup: document manifest linkrev callback some more

Martin and I just got super-confused reading some code here, so I
think it's time for some more documentation.

mercurial/changegroup.py

@@ -1,949 +1,961 b''
 # changegroup.py - Mercurial changegroup manipulation functions
 #
 #  Copyright 2006 Matt Mackall <[e-mail]>
 #
 # This software may be used and distributed according to the terms of the
 # GNU General Public License version 2 or any later version.
 
 from __future__ import absolute_import
 
 import os
 import struct
 import tempfile
 import weakref
 
 from .i18n import _
 from .node import (
     hex,
     nullid,
     nullrev,
     short,
 )
 
 from . import (
     branchmap,
     dagutil,
     discovery,
     error,
     mdiff,
     phases,
     util,
 )
 
 _CHANGEGROUPV1_DELTA_HEADER = "20s20s20s20s"
 _CHANGEGROUPV2_DELTA_HEADER = "20s20s20s20s20s"
 
 def readexactly(stream, n):
     '''read n bytes from stream.read and abort if less was available'''
     s = stream.read(n)
     if len(s) < n:
         raise error.Abort(_("stream ended unexpectedly"
                            " (got %d bytes, expected %d)")
                           % (len(s), n))
     return s
 
 def getchunk(stream):
     """return the next chunk from stream as a string"""
     d = readexactly(stream, 4)
     l = struct.unpack(">l", d)[0]
     if l <= 4:
         if l:
             raise error.Abort(_("invalid chunk length %d") % l)
         return ""
     return readexactly(stream, l - 4)
 
 def chunkheader(length):
     """return a changegroup chunk header (string)"""
     return struct.pack(">l", length + 4)
 
 def closechunk():
     """return a changegroup chunk header (string) for a zero-length chunk"""
     return struct.pack(">l", 0)
 
 def combineresults(results):
     """logic to combine 0 or more addchangegroup results into one"""
     changedheads = 0
     result = 1
     for ret in results:
         # If any changegroup result is 0, return 0
         if ret == 0:
             result = 0
             break
         if ret < -1:
             changedheads += ret + 1
         elif ret > 1:
             changedheads += ret - 1
     if changedheads > 0:
         result = 1 + changedheads
     elif changedheads < 0:
         result = -1 + changedheads
     return result
 
 bundletypes = {
     "": ("", None),       # only when using unbundle on ssh and old http servers
                           # since the unification ssh accepts a header but there
                           # is no capability signaling it.
     "HG20": (), # special-cased below
     "HG10UN": ("HG10UN", None),
     "HG10BZ": ("HG10", 'BZ'),
     "HG10GZ": ("HG10GZ", 'GZ'),
 }
 
 # hgweb uses this list to communicate its preferred type
 bundlepriority = ['HG10GZ', 'HG10BZ', 'HG10UN']
 
 def writechunks(ui, chunks, filename, vfs=None):
     """Write chunks to a file and return its filename.
 
     The stream is assumed to be a bundle file.
     Existing files will not be overwritten.
     If no filename is specified, a temporary file is created.
     """
     fh = None
     cleanup = None
     try:
         if filename:
             if vfs:
                 fh = vfs.open(filename, "wb")
             else:
                 fh = open(filename, "wb")
         else:
             fd, filename = tempfile.mkstemp(prefix="hg-bundle-", suffix=".hg")
             fh = os.fdopen(fd, "wb")
         cleanup = filename
         for c in chunks:
             fh.write(c)
         cleanup = None
         return filename
     finally:
         if fh is not None:
             fh.close()
         if cleanup is not None:
             if filename and vfs:
                 vfs.unlink(cleanup)
             else:
                 os.unlink(cleanup)
 
 def writebundle(ui, cg, filename, bundletype, vfs=None, compression=None):
     """Write a bundle file and return its filename.
 
     Existing files will not be overwritten.
     If no filename is specified, a temporary file is created.
     bz2 compression can be turned off.
     The bundle file will be deleted in case of errors.
     """
 
     if bundletype == "HG20":
         from . import bundle2
         bundle = bundle2.bundle20(ui)
         bundle.setcompression(compression)
         part = bundle.newpart('changegroup', data=cg.getchunks())
         part.addparam('version', cg.version)
         chunkiter = bundle.getchunks()
     else:
         # compression argument is only for the bundle2 case
         assert compression is None
         if cg.version != '01':
             raise error.Abort(_('old bundle types only supports v1 '
                                 'changegroups'))
         header, comp = bundletypes[bundletype]
         if comp not in util.compressors:
             raise error.Abort(_('unknown stream compression type: %s')
                               % comp)
         z = util.compressors[comp]()
         subchunkiter = cg.getchunks()
         def chunkiter():
             yield header
             for chunk in subchunkiter:
                 yield z.compress(chunk)
             yield z.flush()
         chunkiter = chunkiter()
 
     # parse the changegroup data, otherwise we will block
     # in case of sshrepo because we don't know the end of the stream
 
     # an empty chunkgroup is the end of the changegroup
     # a changegroup has at least 2 chunkgroups (changelog and manifest).
     # after that, an empty chunkgroup is the end of the changegroup
     return writechunks(ui, chunkiter, filename, vfs=vfs)
 
 class cg1unpacker(object):
     """Unpacker for cg1 changegroup streams.
 
     A changegroup unpacker handles the framing of the revision data in
     the wire format. Most consumers will want to use the apply()
     method to add the changes from the changegroup to a repository.
 
     If you're forwarding a changegroup unmodified to another consumer,
     use getchunks(), which returns an iterator of changegroup
     chunks. This is mostly useful for cases where you need to know the
     data stream has ended by observing the end of the changegroup.
 
     deltachunk() is useful only if you're applying delta data. Most
     consumers should prefer apply() instead.
 
     A few other public methods exist. Those are used only for
     bundlerepo and some debug commands - their use is discouraged.
     """
     deltaheader = _CHANGEGROUPV1_DELTA_HEADER
     deltaheadersize = struct.calcsize(deltaheader)
     version = '01'
     def __init__(self, fh, alg):
         if alg == 'UN':
             alg = None # get more modern without breaking too much
         if not alg in util.decompressors:
             raise error.Abort(_('unknown stream compression type: %s')
                              % alg)
         if alg == 'BZ':
             alg = '_truncatedBZ'
         self._stream = util.decompressors[alg](fh)
         self._type = alg
         self.callback = None
 
     # These methods (compressed, read, seek, tell) all appear to only
     # be used by bundlerepo, but it's a little hard to tell.
     def compressed(self):
         return self._type is not None
     def read(self, l):
         return self._stream.read(l)
     def seek(self, pos):
         return self._stream.seek(pos)
     def tell(self):
         return self._stream.tell()
     def close(self):
         return self._stream.close()
 
     def _chunklength(self):
         d = readexactly(self._stream, 4)
         l = struct.unpack(">l", d)[0]
         if l <= 4:
             if l:
                 raise error.Abort(_("invalid chunk length %d") % l)
             return 0
         if self.callback:
             self.callback()
         return l - 4
 
     def changelogheader(self):
         """v10 does not have a changelog header chunk"""
         return {}
 
     def manifestheader(self):
         """v10 does not have a manifest header chunk"""
         return {}
 
     def filelogheader(self):
         """return the header of the filelogs chunk, v10 only has the filename"""
         l = self._chunklength()
         if not l:
             return {}
         fname = readexactly(self._stream, l)
         return {'filename': fname}
 
     def _deltaheader(self, headertuple, prevnode):
         node, p1, p2, cs = headertuple
         if prevnode is None:
             deltabase = p1
         else:
             deltabase = prevnode
         return node, p1, p2, deltabase, cs
 
     def deltachunk(self, prevnode):
         l = self._chunklength()
         if not l:
             return {}
         headerdata = readexactly(self._stream, self.deltaheadersize)
         header = struct.unpack(self.deltaheader, headerdata)
         delta = readexactly(self._stream, l - self.deltaheadersize)
         node, p1, p2, deltabase, cs = self._deltaheader(header, prevnode)
         return {'node': node, 'p1': p1, 'p2': p2, 'cs': cs,
                 'deltabase': deltabase, 'delta': delta}
 
     def getchunks(self):
         """returns all the chunks contains in the bundle
 
         Used when you need to forward the binary stream to a file or another
         network API. To do so, it parse the changegroup data, otherwise it will
         block in case of sshrepo because it don't know the end of the stream.
         """
         # an empty chunkgroup is the end of the changegroup
         # a changegroup has at least 2 chunkgroups (changelog and manifest).
         # after that, an empty chunkgroup is the end of the changegroup
         empty = False
         count = 0
         while not empty or count <= 2:
             empty = True
             count += 1
             while True:
                 chunk = getchunk(self)
                 if not chunk:
                     break
                 empty = False
                 yield chunkheader(len(chunk))
                 pos = 0
                 while pos < len(chunk):
                     next = pos + 2**20
                     yield chunk[pos:next]
                     pos = next
             yield closechunk()
 
     def _unpackmanifests(self, repo, revmap, trp, prog, numchanges):
         # We know that we'll never have more manifests than we had
         # changesets.
         self.callback = prog(_('manifests'), numchanges)
         # no need to check for empty manifest group here:
         # if the result of the merge of 1 and 2 is the same in 3 and 4,
         # no new manifest will be created and the manifest group will
         # be empty during the pull
         self.manifestheader()
         repo.manifest.addgroup(self, revmap, trp)
         repo.ui.progress(_('manifests'), None)
 
     def apply(self, repo, srctype, url, emptyok=False,
               targetphase=phases.draft, expectedtotal=None):
         """Add the changegroup returned by source.read() to this repo.
         srctype is a string like 'push', 'pull', or 'unbundle'.  url is
         the URL of the repo where this changegroup is coming from.
 
         Return an integer summarizing the change to this repo:
         - nothing changed or no source: 0
         - more heads than before: 1+added heads (2..n)
         - fewer heads than before: -1-removed heads (-2..-n)
         - number of heads stays the same: 1
         """
         repo = repo.unfiltered()
         wasempty = (len(repo.changelog) == 0)
         def csmap(x):
             repo.ui.debug("add changeset %s\n" % short(x))
             return len(cl)
 
         def revmap(x):
             return cl.rev(x)
 
         changesets = files = revisions = 0
 
         tr = repo.transaction("\n".join([srctype, util.hidepassword(url)]))
         try:
             # The transaction could have been created before and already
             # carries source information. In this case we use the top
             # level data. We overwrite the argument because we need to use
             # the top level value (if they exist) in this function.
             srctype = tr.hookargs.setdefault('source', srctype)
             url = tr.hookargs.setdefault('url', url)
             repo.hook('prechangegroup', throw=True, **tr.hookargs)
 
             # write changelog data to temp files so concurrent readers
             # will not see an inconsistent view
             cl = repo.changelog
             cl.delayupdate(tr)
             oldheads = cl.heads()
 
             trp = weakref.proxy(tr)
             # pull off the changeset group
             repo.ui.status(_("adding changesets\n"))
             clstart = len(cl)
             class prog(object):
                 def __init__(self, step, total):
                     self._step = step
                     self._total = total
                     self._count = 1
                 def __call__(self):
                     repo.ui.progress(self._step, self._count, unit=_('chunks'),
                                      total=self._total)
                     self._count += 1
             self.callback = prog(_('changesets'), expectedtotal)
 
             efiles = set()
             def onchangelog(cl, node):
                 efiles.update(cl.read(node)[3])
 
             self.changelogheader()
             srccontent = cl.addgroup(self, csmap, trp,
                                      addrevisioncb=onchangelog)
             efiles = len(efiles)
 
             if not (srccontent or emptyok):
                 raise error.Abort(_("received changelog group is empty"))
             clend = len(cl)
             changesets = clend - clstart
             repo.ui.progress(_('changesets'), None)
 
             # pull off the manifest group
             repo.ui.status(_("adding manifests\n"))
             self._unpackmanifests(repo, revmap, trp, prog, changesets)
 
             needfiles = {}
             if repo.ui.configbool('server', 'validate', default=False):
                 # validate incoming csets have their manifests
                 for cset in xrange(clstart, clend):
                     mfnode = repo.changelog.read(repo.changelog.node(cset))[0]
                     mfest = repo.manifest.readdelta(mfnode)
                     # store file nodes we must see
                     for f, n in mfest.iteritems():
                         needfiles.setdefault(f, set()).add(n)
 
             # process the files
             repo.ui.status(_("adding file changes\n"))
             self.callback = None
             pr = prog(_('files'), efiles)
             newrevs, newfiles = _addchangegroupfiles(
                 repo, self, revmap, trp, pr, needfiles, wasempty)
             revisions += newrevs
             files += newfiles
 
             dh = 0
             if oldheads:
                 heads = cl.heads()
                 dh = len(heads) - len(oldheads)
                 for h in heads:
                     if h not in oldheads and repo[h].closesbranch():
                         dh -= 1
             htext = ""
             if dh:
                 htext = _(" (%+d heads)") % dh
 
             repo.ui.status(_("added %d changesets"
                              " with %d changes to %d files%s\n")
                              % (changesets, revisions, files, htext))
             repo.invalidatevolatilesets()
 
             if changesets > 0:
                 if 'node' not in tr.hookargs:
                     tr.hookargs['node'] = hex(cl.node(clstart))
                     hookargs = dict(tr.hookargs)
                 else:
                     hookargs = dict(tr.hookargs)
                     hookargs['node'] = hex(cl.node(clstart))
                 repo.hook('pretxnchangegroup', throw=True, **hookargs)
 
             added = [cl.node(r) for r in xrange(clstart, clend)]
             publishing = repo.publishing()
             if srctype in ('push', 'serve'):
                 # Old servers can not push the boundary themselves.
                 # New servers won't push the boundary if changeset already
                 # exists locally as secret
                 #
                 # We should not use added here but the list of all change in
                 # the bundle
                 if publishing:
                     phases.advanceboundary(repo, tr, phases.public, srccontent)
                 else:
                     # Those changesets have been pushed from the outside, their
                     # phases are going to be pushed alongside. Therefor
                     # `targetphase` is ignored.
                     phases.advanceboundary(repo, tr, phases.draft, srccontent)
                     phases.retractboundary(repo, tr, phases.draft, added)
             elif srctype != 'strip':
                 # publishing only alter behavior during push
                 #
                 # strip should not touch boundary at all
                 phases.retractboundary(repo, tr, targetphase, added)
 
             if changesets > 0:
                 if srctype != 'strip':
                     # During strip, branchcache is invalid but coming call to
                     # `destroyed` will repair it.
                     # In other case we can safely update cache on disk.
                     branchmap.updatecache(repo.filtered('served'))
 
                 def runhooks():
                     # These hooks run when the lock releases, not when the
                     # transaction closes. So it's possible for the changelog
                     # to have changed since we last saw it.
                     if clstart >= len(repo):
                         return
 
                     # forcefully update the on-disk branch cache
                     repo.ui.debug("updating the branch cache\n")
                     repo.hook("changegroup", **hookargs)
 
                     for n in added:
                         args = hookargs.copy()
                         args['node'] = hex(n)
                         repo.hook("incoming", **args)
 
                     newheads = [h for h in repo.heads() if h not in oldheads]
                     repo.ui.log("incoming",
                                 "%s incoming changes - new heads: %s\n",
                                 len(added),
                                 ', '.join([hex(c[:6]) for c in newheads]))
 
                 tr.addpostclose('changegroup-runhooks-%020i' % clstart,
                                 lambda tr: repo._afterlock(runhooks))
 
             tr.close()
 
         finally:
             tr.release()
             repo.ui.flush()
         # never return 0 here:
         if dh < 0:
             return dh - 1
         else:
             return dh + 1
 
 class cg2unpacker(cg1unpacker):
     """Unpacker for cg2 streams.
 
     cg2 streams add support for generaldelta, so the delta header
     format is slightly different. All other features about the data
     remain the same.
     """
     deltaheader = _CHANGEGROUPV2_DELTA_HEADER
     deltaheadersize = struct.calcsize(deltaheader)
     version = '02'
 
     def _deltaheader(self, headertuple, prevnode):
         node, p1, p2, deltabase, cs = headertuple
         return node, p1, p2, deltabase, cs
 
 class headerlessfixup(object):
     def __init__(self, fh, h):
         self._h = h
         self._fh = fh
     def read(self, n):
         if self._h:
             d, self._h = self._h[:n], self._h[n:]
             if len(d) < n:
                 d += readexactly(self._fh, n - len(d))
             return d
         return readexactly(self._fh, n)
 
 class cg1packer(object):
     deltaheader = _CHANGEGROUPV1_DELTA_HEADER
     version = '01'
     def __init__(self, repo, bundlecaps=None):
         """Given a source repo, construct a bundler.
 
         bundlecaps is optional and can be used to specify the set of
         capabilities which can be used to build the bundle.
         """
         # Set of capabilities we can use to build the bundle.
         if bundlecaps is None:
             bundlecaps = set()
         self._bundlecaps = bundlecaps
         # experimental config: bundle.reorder
         reorder = repo.ui.config('bundle', 'reorder', 'auto')
         if reorder == 'auto':
             reorder = None
         else:
             reorder = util.parsebool(reorder)
         self._repo = repo
         self._reorder = reorder
         self._progress = repo.ui.progress
         if self._repo.ui.verbose and not self._repo.ui.debugflag:
             self._verbosenote = self._repo.ui.note
         else:
             self._verbosenote = lambda s: None
 
     def close(self):
         return closechunk()
 
     def fileheader(self, fname):
         return chunkheader(len(fname)) + fname
 
     def group(self, nodelist, revlog, lookup, units=None):
         """Calculate a delta group, yielding a sequence of changegroup chunks
         (strings).
 
         Given a list of changeset revs, return a set of deltas and
         metadata corresponding to nodes. The first delta is
         first parent(nodelist[0]) -> nodelist[0], the receiver is
         guaranteed to have this parent as it has all history before
         these changesets. In the case firstparent is nullrev the
         changegroup starts with a full revision.
 
         If units is not None, progress detail will be generated, units specifies
         the type of revlog that is touched (changelog, manifest, etc.).
         """
         # if we don't have any revisions touched by these changesets, bail
         if len(nodelist) == 0:
             yield self.close()
             return
 
         # for generaldelta revlogs, we linearize the revs; this will both be
         # much quicker and generate a much smaller bundle
         if (revlog._generaldelta and self._reorder is None) or self._reorder:
             dag = dagutil.revlogdag(revlog)
             revs = set(revlog.rev(n) for n in nodelist)
             revs = dag.linearize(revs)
         else:
             revs = sorted([revlog.rev(n) for n in nodelist])
 
         # add the parent of the first rev
         p = revlog.parentrevs(revs[0])[0]
         revs.insert(0, p)
 
         # build deltas
         total = len(revs) - 1
         msgbundling = _('bundling')
         for r in xrange(len(revs) - 1):
             if units is not None:
                 self._progress(msgbundling, r + 1, unit=units, total=total)
             prev, curr = revs[r], revs[r + 1]
             linknode = lookup(revlog.node(curr))
             for c in self.revchunk(revlog, curr, prev, linknode):
                 yield c
 
         if units is not None:
             self._progress(msgbundling, None)
         yield self.close()
 
     # filter any nodes that claim to be part of the known set
     def prune(self, revlog, missing, commonrevs):
         rr, rl = revlog.rev, revlog.linkrev
         return [n for n in missing if rl(rr(n)) not in commonrevs]
 
     def _packmanifests(self, mfnodes, lookuplinknode):
         """Pack flat manifests into a changegroup stream."""
         ml = self._repo.manifest
         size = 0
         for chunk in self.group(
                 mfnodes, ml, lookuplinknode, units=_('manifests')):
             size += len(chunk)
             yield chunk
         self._verbosenote(_('%8.i (manifests)\n') % size)
 
     def generate(self, commonrevs, clnodes, fastpathlinkrev, source):
         '''yield a sequence of changegroup chunks (strings)'''
         repo = self._repo
         cl = repo.changelog
         ml = repo.manifest
 
         clrevorder = {}
         mfs = {} # needed manifests
         fnodes = {} # needed file nodes
         changedfiles = set()
 
         # Callback for the changelog, used to collect changed files and manifest
         # nodes.
         # Returns the linkrev node (identity in the changelog case).
         def lookupcl(x):
             c = cl.read(x)
             clrevorder[x] = len(clrevorder)
             changedfiles.update(c[3])
             # record the first changeset introducing this manifest version
             mfs.setdefault(c[0], x)
             return x
 
         self._verbosenote(_('uncompressed size of bundle content:\n'))
         size = 0
         for chunk in self.group(clnodes, cl, lookupcl, units=_('changesets')):
             size += len(chunk)
             yield chunk
         self._verbosenote(_('%8.i (changelog)\n') % size)
 
         # We need to make sure that the linkrev in the changegroup refers to
         # the first changeset that introduced the manifest or file revision.
         # The fastpath is usually safer than the slowpath, because the filelogs
         # are walked in revlog order.
         #
         # When taking the slowpath with reorder=None and the manifest revlog
         # uses generaldelta, the manifest may be walked in the "wrong" order.
         # Without 'clrevorder', we would get an incorrect linkrev (see fix in
         # cc0ff93d0c0c).
         #
         # When taking the fastpath, we are only vulnerable to reordering
         # of the changelog itself. The changelog never uses generaldelta, so
         # it is only reordered when reorder=True. To handle this case, we
         # simply take the slowpath, which already has the 'clrevorder' logic.
         # This was also fixed in cc0ff93d0c0c.
         fastpathlinkrev = fastpathlinkrev and not self._reorder
         # Callback for the manifest, used to collect linkrevs for filelog
         # revisions.
         # Returns the linkrev node (collected in lookupcl).
         def lookupmflinknode(x):
+            """Callback for looking up the linknode for manifests.
+
+            Returns the linkrev node for the specified manifest.
+
+            SIDE EFFECT:
+
+              fclnodes gets populated with the list of relevant
+              file nodes if we're not using fastpathlinkrev.
+
+            Note that this means you can't trust fclnodes until
+            after manifests have been sent to the client.
+            """
             clnode = mfs[x]
             if not fastpathlinkrev:
                 mdata = ml.readfast(x)
                 for f, n in mdata.iteritems():
                     if f in changedfiles:
                         # record the first changeset introducing this filelog
                         # version
                         fclnodes = fnodes.setdefault(f, {})
                         fclnode = fclnodes.setdefault(n, clnode)
                         if clrevorder[clnode] < clrevorder[fclnode]:
                             fclnodes[n] = clnode
             return clnode
 
         mfnodes = self.prune(ml, mfs, commonrevs)
         for x in self._packmanifests(mfnodes, lookupmflinknode):
             yield x
 
         mfs.clear()
         clrevs = set(cl.rev(x) for x in clnodes)
 
         def linknodes(filerevlog, fname):
             if fastpathlinkrev:
                 llr = filerevlog.linkrev
                 def genfilenodes():
                     for r in filerevlog:
                         linkrev = llr(r)
                         if linkrev in clrevs:
                             yield filerevlog.node(r), cl.node(linkrev)
                 return dict(genfilenodes())
             return fnodes.get(fname, {})
 
         for chunk in self.generatefiles(changedfiles, linknodes, commonrevs,
                                         source):
             yield chunk
 
         yield self.close()
 
         if clnodes:
             repo.hook('outgoing', node=hex(clnodes[0]), source=source)
 
     # The 'source' parameter is useful for extensions
     def generatefiles(self, changedfiles, linknodes, commonrevs, source):
         repo = self._repo
         progress = self._progress
         msgbundling = _('bundling')
 
         total = len(changedfiles)
         # for progress output
         msgfiles = _('files')
         for i, fname in enumerate(sorted(changedfiles)):
             filerevlog = repo.file(fname)
             if not filerevlog:
                 raise error.Abort(_("empty or missing revlog for %s") % fname)
 
             linkrevnodes = linknodes(filerevlog, fname)
             # Lookup for filenodes, we collected the linkrev nodes above in the
             # fastpath case and with lookupmf in the slowpath case.
             def lookupfilelog(x):
                 return linkrevnodes[x]
 
             filenodes = self.prune(filerevlog, linkrevnodes, commonrevs)
             if filenodes:
                 progress(msgbundling, i + 1, item=fname, unit=msgfiles,
                          total=total)
                 h = self.fileheader(fname)
                 size = len(h)
                 yield h
                 for chunk in self.group(filenodes, filerevlog, lookupfilelog):
                     size += len(chunk)
                     yield chunk
                 self._verbosenote(_('%8.i  %s\n') % (size, fname))
         progress(msgbundling, None)
 
     def deltaparent(self, revlog, rev, p1, p2, prev):
         return prev
 
     def revchunk(self, revlog, rev, prev, linknode):
         node = revlog.node(rev)
         p1, p2 = revlog.parentrevs(rev)
         base = self.deltaparent(revlog, rev, p1, p2, prev)
 
         prefix = ''
         if revlog.iscensored(base) or revlog.iscensored(rev):
             try:
                 delta = revlog.revision(node)
             except error.CensoredNodeError as e:
                 delta = e.tombstone
             if base == nullrev:
                 prefix = mdiff.trivialdiffheader(len(delta))
             else:
                 baselen = revlog.rawsize(base)
                 prefix = mdiff.replacediffheader(baselen, len(delta))
         elif base == nullrev:
             delta = revlog.revision(node)
             prefix = mdiff.trivialdiffheader(len(delta))
         else:
             delta = revlog.revdiff(base, rev)
         p1n, p2n = revlog.parents(node)
         basenode = revlog.node(base)
         meta = self.builddeltaheader(node, p1n, p2n, basenode, linknode)
         meta += prefix
         l = len(meta) + len(delta)
         yield chunkheader(l)
         yield meta
         yield delta
     def builddeltaheader(self, node, p1n, p2n, basenode, linknode):
         # do nothing with basenode, it is implicitly the previous one in HG10
         return struct.pack(self.deltaheader, node, p1n, p2n, linknode)
 
 class cg2packer(cg1packer):
     version = '02'
     deltaheader = _CHANGEGROUPV2_DELTA_HEADER
 
     def __init__(self, repo, bundlecaps=None):
         super(cg2packer, self).__init__(repo, bundlecaps)
         if self._reorder is None:
             # Since generaldelta is directly supported by cg2, reordering
             # generally doesn't help, so we disable it by default (treating
             # bundle.reorder=auto just like bundle.reorder=False).
             self._reorder = False
 
     def deltaparent(self, revlog, rev, p1, p2, prev):
         dp = revlog.deltaparent(rev)
         # avoid storing full revisions; pick prev in those cases
         # also pick prev when we can't be sure remote has dp
         if dp == nullrev or (dp != p1 and dp != p2 and dp != prev):
             return prev
         return dp
 
     def builddeltaheader(self, node, p1n, p2n, basenode, linknode):
         return struct.pack(self.deltaheader, node, p1n, p2n, basenode, linknode)
 
 packermap = {'01': (cg1packer, cg1unpacker),
              # cg2 adds support for exchanging generaldelta
              '02': (cg2packer, cg2unpacker),
 }
 
 def _changegroupinfo(repo, nodes, source):
     if repo.ui.verbose or source == 'bundle':
         repo.ui.status(_("%d changesets found\n") % len(nodes))
     if repo.ui.debugflag:
         repo.ui.debug("list of changesets:\n")
         for node in nodes:
             repo.ui.debug("%s\n" % hex(node))
 
 def getsubsetraw(repo, outgoing, bundler, source, fastpath=False):
     repo = repo.unfiltered()
     commonrevs = outgoing.common
     csets = outgoing.missing
     heads = outgoing.missingheads
     # We go through the fast path if we get told to, or if all (unfiltered
     # heads have been requested (since we then know there all linkrevs will
     # be pulled by the client).
     heads.sort()
     fastpathlinkrev = fastpath or (
             repo.filtername is None and heads == sorted(repo.heads()))
 
     repo.hook('preoutgoing', throw=True, source=source)
     _changegroupinfo(repo, csets, source)
     return bundler.generate(commonrevs, csets, fastpathlinkrev, source)
 
 def getsubset(repo, outgoing, bundler, source, fastpath=False):
     gengroup = getsubsetraw(repo, outgoing, bundler, source, fastpath)
     return packermap[bundler.version][1](util.chunkbuffer(gengroup), None)
 
 def changegroupsubset(repo, roots, heads, source, version='01'):
     """Compute a changegroup consisting of all the nodes that are
     descendants of any of the roots and ancestors of any of the heads.
     Return a chunkbuffer object whose read() method will return
     successive changegroup chunks.
 
     It is fairly complex as determining which filenodes and which
     manifest nodes need to be included for the changeset to be complete
     is non-trivial.
 
     Another wrinkle is doing the reverse, figuring out which changeset in
     the changegroup a particular filenode or manifestnode belongs to.
     """
     cl = repo.changelog
     if not roots:
         roots = [nullid]
     discbases = []
     for n in roots:
         discbases.extend([p for p in cl.parents(n) if p != nullid])
     # TODO: remove call to nodesbetween.
     csets, roots, heads = cl.nodesbetween(roots, heads)
     included = set(csets)
     discbases = [n for n in discbases if n not in included]
     outgoing = discovery.outgoing(cl, discbases, heads)
     bundler = packermap[version][0](repo)
     return getsubset(repo, outgoing, bundler, source)
 
 def getlocalchangegroupraw(repo, source, outgoing, bundlecaps=None,
                            version='01'):
     """Like getbundle, but taking a discovery.outgoing as an argument.
 
     This is only implemented for local repos and reuses potentially
     precomputed sets in outgoing. Returns a raw changegroup generator."""
     if not outgoing.missing:
         return None
     bundler = packermap[version][0](repo, bundlecaps)
     return getsubsetraw(repo, outgoing, bundler, source)
 
 def getlocalchangegroup(repo, source, outgoing, bundlecaps=None,
                         version='01'):
     """Like getbundle, but taking a discovery.outgoing as an argument.
 
     This is only implemented for local repos and reuses potentially
     precomputed sets in outgoing."""
     if not outgoing.missing:
         return None
     bundler = packermap[version][0](repo, bundlecaps)
     return getsubset(repo, outgoing, bundler, source)
 
 def computeoutgoing(repo, heads, common):
     """Computes which revs are outgoing given a set of common
     and a set of heads.
 
     This is a separate function so extensions can have access to
     the logic.
 
     Returns a discovery.outgoing object.
     """
     cl = repo.changelog
     if common:
         hasnode = cl.hasnode
         common = [n for n in common if hasnode(n)]
     else:
         common = [nullid]
     if not heads:
         heads = cl.heads()
     return discovery.outgoing(cl, common, heads)
 
 def getchangegroup(repo, source, heads=None, common=None, bundlecaps=None,
                    version='01'):
     """Like changegroupsubset, but returns the set difference between the
     ancestors of heads and the ancestors common.
 
     If heads is None, use the local heads. If common is None, use [nullid].
 
     The nodes in common might not all be known locally due to the way the
     current discovery protocol works.
     """
     outgoing = computeoutgoing(repo, heads, common)
     return getlocalchangegroup(repo, source, outgoing, bundlecaps=bundlecaps,
                                version=version)
 
 def changegroup(repo, basenodes, source):
     # to avoid a race we use changegroupsubset() (issue1320)
     return changegroupsubset(repo, basenodes, repo.heads(), source)
 
 def _addchangegroupfiles(repo, source, revmap, trp, pr, needfiles, wasempty):
     revisions = 0
     files = 0
     while True:
         chunkdata = source.filelogheader()
         if not chunkdata:
             break
         f = chunkdata["filename"]
         repo.ui.debug("adding %s revisions\n" % f)
         pr()
         fl = repo.file(f)
         o = len(fl)
         try:
             if not fl.addgroup(source, revmap, trp):
                 raise error.Abort(_("received file revlog group is empty"))
         except error.CensoredBaseError as e:
             raise error.Abort(_("received delta base is censored: %s") % e)
         revisions += len(fl) - o
         files += 1
         if f in needfiles:
             needs = needfiles[f]
             for new in xrange(o, len(fl)):
                 n = fl.node(new)
                 if n in needs:
                     needs.remove(n)
                 else:
                     raise error.Abort(
                         _("received spurious file revlog entry"))
             if not needs:
                 del needfiles[f]
     repo.ui.progress(_('files'), None)
 
     for f, needs in needfiles.iteritems():
         fl = repo.file(f)
         for n in needs:
             try:
                 fl.rev(n)
             except error.LookupError:
                 raise error.Abort(
                     _('missing file data for %s:%s - run hg verify') %
                     (f, hex(n)))
 
     return revisions, files